Rafał Miłecki 702131e2a3 bcma: move PCI IRQ control function to host specific code ... This function isn't really related to any bus core. It touches PCI device config registers only, so move it to the (PCI) host file. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>		2015-03-13 16:25:50 +02:00
..
b43.h	b43: support bcma core reset on AC-PHY hardware	2015-01-29 10:54:43 +02:00
bus.c	b43: flush some writes on Broadcom MIPS SoCs	2014-08-25 16:00:42 -04:00
bus.h	b43: flush some writes on Broadcom MIPS SoCs	2014-08-25 16:00:42 -04:00
debugfs.c
debugfs.h
dma.c
dma.h
Kconfig	b43: AC-PHY: prepare place for developing new PHY support	2015-01-29 10:54:43 +02:00
leds.c
leds.h
lo.c
lo.h
main.c	bcma: move PCI IRQ control function to host specific code	2015-03-13 16:25:50 +02:00
main.h	b43: Implement PHY PLL reset	2014-09-15 15:00:53 -04:00
Makefile	b43: AC-PHY: prepare place for developing new PHY support	2015-01-29 10:54:43 +02:00
pcmcia.c
pcmcia.h
phy_a.c	b43: flush some writes on Broadcom MIPS SoCs	2014-08-25 16:00:42 -04:00
phy_a.h
phy_ac.c	b43: AC-PHY: prepare place for developing new PHY support	2015-01-29 10:54:43 +02:00
phy_ac.h	b43: AC-PHY: prepare place for developing new PHY support	2015-01-29 10:54:43 +02:00
phy_common.c	b43: AC-PHY: prepare place for developing new PHY support	2015-01-29 10:54:43 +02:00
phy_common.h	b43: AC-PHY: prepare place for developing new PHY support	2015-01-29 10:54:43 +02:00
phy_g.c	b43: flush some writes on Broadcom MIPS SoCs	2014-08-25 16:00:42 -04:00
phy_g.h
phy_ht.c	b43: Implement PHY PLL reset	2014-09-15 15:00:53 -04:00
phy_ht.h	b43: HT-PHY: Implement band switching	2014-09-15 15:00:50 -04:00
phy_lcn.c	b43: flush some writes on Broadcom MIPS SoCs	2014-08-25 16:00:42 -04:00
phy_lcn.h
phy_lp.c	b43: flush some writes on Broadcom MIPS SoCs	2014-08-25 16:00:42 -04:00
phy_lp.h
phy_n.c	b43: Implement PHY PLL reset	2014-09-15 15:00:53 -04:00
phy_n.h	b43: N-PHY: support setting custom TX power	2014-08-25 16:00:43 -04:00
pio.c
pio.h
ppr.c	b43: implement PPR (Power Per Rate) management/API	2014-08-25 16:00:43 -04:00
ppr.h	b43: implement PPR (Power Per Rate) management/API	2014-08-25 16:00:43 -04:00
radio_2055.c
radio_2055.h
radio_2056.c
radio_2056.h
radio_2057.c	b43: N-PHY: add tables for radio 0x2057 rev 14	2014-07-18 13:45:25 -04:00
radio_2057.h	b43; N-PHY: write most of the missing code for revs 7+	2014-07-15 15:51:39 -04:00
radio_2059.c	b43: HT-PHY: Update values for frequency calibration	2014-09-15 15:00:50 -04:00
radio_2059.h	b43: HT-PHY: Complete radio init (add missing entries)	2014-09-11 15:27:35 -04:00
rfkill.c
rfkill.h
sdio.c
sdio.h
sysfs.c
sysfs.h
tables_lpphy.c
tables_lpphy.h
tables_nphy.c	b43: N-PHY: add RF power tables for radio 0x2057 revs 9 & 14	2014-08-25 16:00:43 -04:00
tables_nphy.h	b43: N-PHY: add RF power tables for radio 0x2057 revs 9 & 14	2014-08-25 16:00:43 -04:00
tables_phy_ht.c
tables_phy_ht.h
tables_phy_lcn.c
tables_phy_lcn.h
tables.c
tables.h
wa.c
wa.h
xmit.c	b43: report correct rate to mac80211 for 5 GHz packets	2014-07-23 13:08:35 -04:00
xmit.h	b43: update some transmit header constants	2014-09-15 15:00:54 -04:00