bcma: move PCI IRQ control function to host specific code

This function isn't really related to any bus core. It touches PCI
device config registers only, so move it to the (PCI) host file.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
This commit is contained in:
Rafał Miłecki 2015-03-05 18:25:10 +01:00 committed by Kalle Valo
parent 708c964c5d
commit 702131e2a3
6 changed files with 45 additions and 37 deletions

View File

@ -282,39 +282,6 @@ void bcma_core_pci_power_save(struct bcma_bus *bus, bool up)
}
EXPORT_SYMBOL_GPL(bcma_core_pci_power_save);
int bcma_core_pci_irq_ctl(struct bcma_bus *bus, struct bcma_device *core,
bool enable)
{
struct pci_dev *pdev;
u32 coremask, tmp;
int err = 0;
if (bus->hosttype != BCMA_HOSTTYPE_PCI) {
/* This bcma device is not on a PCI host-bus. So the IRQs are
* not routed through the PCI core.
* So we must not enable routing through the PCI core. */
goto out;
}
pdev = bus->host_pci;
err = pci_read_config_dword(pdev, BCMA_PCI_IRQMASK, &tmp);
if (err)
goto out;
coremask = BIT(core->core_index) << 8;
if (enable)
tmp |= coremask;
else
tmp &= ~coremask;
err = pci_write_config_dword(pdev, BCMA_PCI_IRQMASK, tmp);
out:
return err;
}
EXPORT_SYMBOL_GPL(bcma_core_pci_irq_ctl);
static void bcma_core_pci_extend_L1timer(struct bcma_drv_pci *pc, bool extend)
{
u32 w;

View File

@ -351,3 +351,37 @@ void bcma_host_pci_down(struct bcma_bus *bus)
bcma_core_pci_down(&bus->drv_pci[0]);
}
EXPORT_SYMBOL_GPL(bcma_host_pci_down);
/* See also si_pci_setup */
int bcma_host_pci_irq_ctl(struct bcma_bus *bus, struct bcma_device *core,
bool enable)
{
struct pci_dev *pdev;
u32 coremask, tmp;
int err = 0;
if (bus->hosttype != BCMA_HOSTTYPE_PCI) {
/* This bcma device is not on a PCI host-bus. So the IRQs are
* not routed through the PCI core.
* So we must not enable routing through the PCI core. */
goto out;
}
pdev = bus->host_pci;
err = pci_read_config_dword(pdev, BCMA_PCI_IRQMASK, &tmp);
if (err)
goto out;
coremask = BIT(core->core_index) << 8;
if (enable)
tmp |= coremask;
else
tmp &= ~coremask;
err = pci_write_config_dword(pdev, BCMA_PCI_IRQMASK, tmp);
out:
return err;
}
EXPORT_SYMBOL_GPL(bcma_host_pci_irq_ctl);

View File

@ -4866,7 +4866,7 @@ static int b43_wireless_core_init(struct b43_wldev *dev)
switch (dev->dev->bus_type) {
#ifdef CONFIG_B43_BCMA
case B43_BUS_BCMA:
bcma_core_pci_irq_ctl(dev->dev->bdev->bus,
bcma_host_pci_irq_ctl(dev->dev->bdev->bus,
dev->dev->bdev, true);
bcma_host_pci_up(dev->dev->bdev->bus);
break;

View File

@ -4959,7 +4959,7 @@ static int brcms_b_up_prep(struct brcms_hardware *wlc_hw)
* Configure pci/pcmcia here instead of in brcms_c_attach()
* to allow mfg hotswap: down, hotswap (chip power cycle), up.
*/
bcma_core_pci_irq_ctl(wlc_hw->d11core->bus, wlc_hw->d11core,
bcma_host_pci_irq_ctl(wlc_hw->d11core->bus, wlc_hw->d11core,
true);
/*

View File

@ -437,6 +437,8 @@ static inline struct bcma_device *bcma_find_core(struct bcma_bus *bus,
#ifdef CONFIG_BCMA_HOST_PCI
extern void bcma_host_pci_up(struct bcma_bus *bus);
extern void bcma_host_pci_down(struct bcma_bus *bus);
extern int bcma_host_pci_irq_ctl(struct bcma_bus *bus,
struct bcma_device *core, bool enable);
#else
static inline void bcma_host_pci_up(struct bcma_bus *bus)
{
@ -444,6 +446,13 @@ static inline void bcma_host_pci_up(struct bcma_bus *bus)
static inline void bcma_host_pci_down(struct bcma_bus *bus)
{
}
static inline int bcma_host_pci_irq_ctl(struct bcma_bus *bus,
struct bcma_device *core, bool enable)
{
if (bus->hosttype == BCMA_HOSTTYPE_PCI)
return -ENOTSUPP;
return 0;
}
#endif
extern bool bcma_core_is_enabled(struct bcma_device *core);

View File

@ -238,8 +238,6 @@ struct bcma_drv_pci {
#define pcicore_write16(pc, offset, val) bcma_write16((pc)->core, offset, val)
#define pcicore_write32(pc, offset, val) bcma_write32((pc)->core, offset, val)
extern int bcma_core_pci_irq_ctl(struct bcma_bus *bus,
struct bcma_device *core, bool enable);
extern void bcma_core_pci_power_save(struct bcma_bus *bus, bool up);
extern int bcma_core_pci_pcibios_map_irq(const struct pci_dev *dev);