forked from Minki/linux
e0d8d59b08
The specs are a bit unclear whether the per-plane trickle feed disable control exists on VLV. There is another trickle feed disable control in the MI_ARB register. After some experimentation it turns out both the DSPCNTR trickle feed bits and the MI_ARB bit can be toggled. However the DSPCNTR bits don't seem to have any effect. The MI_ARB bit, on the other hand, has a noticable effect. I performed an experiment where I reduced the FIFO size via DSPARB and observed the effect of the MI_ARB trickle feed bit on the display. Using a 1920x1080-60 mode, with MI_ARB=0x4 the display started to have problems with DSPARB=0x42424242, whereas with MI_ARB=0x0 the problems didn't start until DSPARB=0x09090909. This seems to confirm that the MI_ARB trickle feed bit actually does work. So replace the use of the DSPCNTR trickle feed bits with MI_ARB on VLV. v2: Amend commit message with results from experimentation Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
5596 lines
155 KiB
C
5596 lines
155 KiB
C
/*
|
|
* Copyright © 2012 Intel Corporation
|
|
*
|
|
* Permission is hereby granted, free of charge, to any person obtaining a
|
|
* copy of this software and associated documentation files (the "Software"),
|
|
* to deal in the Software without restriction, including without limitation
|
|
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
|
|
* and/or sell copies of the Software, and to permit persons to whom the
|
|
* Software is furnished to do so, subject to the following conditions:
|
|
*
|
|
* The above copyright notice and this permission notice (including the next
|
|
* paragraph) shall be included in all copies or substantial portions of the
|
|
* Software.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
|
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
|
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
|
|
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
|
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
|
|
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
|
|
* IN THE SOFTWARE.
|
|
*
|
|
* Authors:
|
|
* Eugeni Dodonov <eugeni.dodonov@intel.com>
|
|
*
|
|
*/
|
|
|
|
#include <linux/cpufreq.h>
|
|
#include "i915_drv.h"
|
|
#include "intel_drv.h"
|
|
#include "../../../platform/x86/intel_ips.h"
|
|
#include <linux/module.h>
|
|
|
|
#define FORCEWAKE_ACK_TIMEOUT_MS 2
|
|
|
|
/* FBC, or Frame Buffer Compression, is a technique employed to compress the
|
|
* framebuffer contents in-memory, aiming at reducing the required bandwidth
|
|
* during in-memory transfers and, therefore, reduce the power packet.
|
|
*
|
|
* The benefits of FBC are mostly visible with solid backgrounds and
|
|
* variation-less patterns.
|
|
*
|
|
* FBC-related functionality can be enabled by the means of the
|
|
* i915.i915_enable_fbc parameter
|
|
*/
|
|
|
|
static bool intel_crtc_active(struct drm_crtc *crtc)
|
|
{
|
|
/* Be paranoid as we can arrive here with only partial
|
|
* state retrieved from the hardware during setup.
|
|
*/
|
|
return to_intel_crtc(crtc)->active && crtc->fb && crtc->mode.clock;
|
|
}
|
|
|
|
static void i8xx_disable_fbc(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
u32 fbc_ctl;
|
|
|
|
/* Disable compression */
|
|
fbc_ctl = I915_READ(FBC_CONTROL);
|
|
if ((fbc_ctl & FBC_CTL_EN) == 0)
|
|
return;
|
|
|
|
fbc_ctl &= ~FBC_CTL_EN;
|
|
I915_WRITE(FBC_CONTROL, fbc_ctl);
|
|
|
|
/* Wait for compressing bit to clear */
|
|
if (wait_for((I915_READ(FBC_STATUS) & FBC_STAT_COMPRESSING) == 0, 10)) {
|
|
DRM_DEBUG_KMS("FBC idle timed out\n");
|
|
return;
|
|
}
|
|
|
|
DRM_DEBUG_KMS("disabled FBC\n");
|
|
}
|
|
|
|
static void i8xx_enable_fbc(struct drm_crtc *crtc, unsigned long interval)
|
|
{
|
|
struct drm_device *dev = crtc->dev;
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
struct drm_framebuffer *fb = crtc->fb;
|
|
struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb);
|
|
struct drm_i915_gem_object *obj = intel_fb->obj;
|
|
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
|
|
int cfb_pitch;
|
|
int plane, i;
|
|
u32 fbc_ctl, fbc_ctl2;
|
|
|
|
cfb_pitch = dev_priv->cfb_size / FBC_LL_SIZE;
|
|
if (fb->pitches[0] < cfb_pitch)
|
|
cfb_pitch = fb->pitches[0];
|
|
|
|
/* FBC_CTL wants 64B units */
|
|
cfb_pitch = (cfb_pitch / 64) - 1;
|
|
plane = intel_crtc->plane == 0 ? FBC_CTL_PLANEA : FBC_CTL_PLANEB;
|
|
|
|
/* Clear old tags */
|
|
for (i = 0; i < (FBC_LL_SIZE / 32) + 1; i++)
|
|
I915_WRITE(FBC_TAG + (i * 4), 0);
|
|
|
|
/* Set it up... */
|
|
fbc_ctl2 = FBC_CTL_FENCE_DBL | FBC_CTL_IDLE_IMM | FBC_CTL_CPU_FENCE;
|
|
fbc_ctl2 |= plane;
|
|
I915_WRITE(FBC_CONTROL2, fbc_ctl2);
|
|
I915_WRITE(FBC_FENCE_OFF, crtc->y);
|
|
|
|
/* enable it... */
|
|
fbc_ctl = FBC_CTL_EN | FBC_CTL_PERIODIC;
|
|
if (IS_I945GM(dev))
|
|
fbc_ctl |= FBC_CTL_C3_IDLE; /* 945 needs special SR handling */
|
|
fbc_ctl |= (cfb_pitch & 0xff) << FBC_CTL_STRIDE_SHIFT;
|
|
fbc_ctl |= (interval & 0x2fff) << FBC_CTL_INTERVAL_SHIFT;
|
|
fbc_ctl |= obj->fence_reg;
|
|
I915_WRITE(FBC_CONTROL, fbc_ctl);
|
|
|
|
DRM_DEBUG_KMS("enabled FBC, pitch %d, yoff %d, plane %c, ",
|
|
cfb_pitch, crtc->y, plane_name(intel_crtc->plane));
|
|
}
|
|
|
|
static bool i8xx_fbc_enabled(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
|
|
return I915_READ(FBC_CONTROL) & FBC_CTL_EN;
|
|
}
|
|
|
|
static void g4x_enable_fbc(struct drm_crtc *crtc, unsigned long interval)
|
|
{
|
|
struct drm_device *dev = crtc->dev;
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
struct drm_framebuffer *fb = crtc->fb;
|
|
struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb);
|
|
struct drm_i915_gem_object *obj = intel_fb->obj;
|
|
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
|
|
int plane = intel_crtc->plane == 0 ? DPFC_CTL_PLANEA : DPFC_CTL_PLANEB;
|
|
unsigned long stall_watermark = 200;
|
|
u32 dpfc_ctl;
|
|
|
|
dpfc_ctl = plane | DPFC_SR_EN | DPFC_CTL_LIMIT_1X;
|
|
dpfc_ctl |= DPFC_CTL_FENCE_EN | obj->fence_reg;
|
|
I915_WRITE(DPFC_CHICKEN, DPFC_HT_MODIFY);
|
|
|
|
I915_WRITE(DPFC_RECOMP_CTL, DPFC_RECOMP_STALL_EN |
|
|
(stall_watermark << DPFC_RECOMP_STALL_WM_SHIFT) |
|
|
(interval << DPFC_RECOMP_TIMER_COUNT_SHIFT));
|
|
I915_WRITE(DPFC_FENCE_YOFF, crtc->y);
|
|
|
|
/* enable it... */
|
|
I915_WRITE(DPFC_CONTROL, I915_READ(DPFC_CONTROL) | DPFC_CTL_EN);
|
|
|
|
DRM_DEBUG_KMS("enabled fbc on plane %c\n", plane_name(intel_crtc->plane));
|
|
}
|
|
|
|
static void g4x_disable_fbc(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
u32 dpfc_ctl;
|
|
|
|
/* Disable compression */
|
|
dpfc_ctl = I915_READ(DPFC_CONTROL);
|
|
if (dpfc_ctl & DPFC_CTL_EN) {
|
|
dpfc_ctl &= ~DPFC_CTL_EN;
|
|
I915_WRITE(DPFC_CONTROL, dpfc_ctl);
|
|
|
|
DRM_DEBUG_KMS("disabled FBC\n");
|
|
}
|
|
}
|
|
|
|
static bool g4x_fbc_enabled(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
|
|
return I915_READ(DPFC_CONTROL) & DPFC_CTL_EN;
|
|
}
|
|
|
|
static void sandybridge_blit_fbc_update(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
u32 blt_ecoskpd;
|
|
|
|
/* Make sure blitter notifies FBC of writes */
|
|
gen6_gt_force_wake_get(dev_priv);
|
|
blt_ecoskpd = I915_READ(GEN6_BLITTER_ECOSKPD);
|
|
blt_ecoskpd |= GEN6_BLITTER_FBC_NOTIFY <<
|
|
GEN6_BLITTER_LOCK_SHIFT;
|
|
I915_WRITE(GEN6_BLITTER_ECOSKPD, blt_ecoskpd);
|
|
blt_ecoskpd |= GEN6_BLITTER_FBC_NOTIFY;
|
|
I915_WRITE(GEN6_BLITTER_ECOSKPD, blt_ecoskpd);
|
|
blt_ecoskpd &= ~(GEN6_BLITTER_FBC_NOTIFY <<
|
|
GEN6_BLITTER_LOCK_SHIFT);
|
|
I915_WRITE(GEN6_BLITTER_ECOSKPD, blt_ecoskpd);
|
|
POSTING_READ(GEN6_BLITTER_ECOSKPD);
|
|
gen6_gt_force_wake_put(dev_priv);
|
|
}
|
|
|
|
static void ironlake_enable_fbc(struct drm_crtc *crtc, unsigned long interval)
|
|
{
|
|
struct drm_device *dev = crtc->dev;
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
struct drm_framebuffer *fb = crtc->fb;
|
|
struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb);
|
|
struct drm_i915_gem_object *obj = intel_fb->obj;
|
|
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
|
|
int plane = intel_crtc->plane == 0 ? DPFC_CTL_PLANEA : DPFC_CTL_PLANEB;
|
|
unsigned long stall_watermark = 200;
|
|
u32 dpfc_ctl;
|
|
|
|
dpfc_ctl = I915_READ(ILK_DPFC_CONTROL);
|
|
dpfc_ctl &= DPFC_RESERVED;
|
|
dpfc_ctl |= (plane | DPFC_CTL_LIMIT_1X);
|
|
/* Set persistent mode for front-buffer rendering, ala X. */
|
|
dpfc_ctl |= DPFC_CTL_PERSISTENT_MODE;
|
|
dpfc_ctl |= (DPFC_CTL_FENCE_EN | obj->fence_reg);
|
|
I915_WRITE(ILK_DPFC_CHICKEN, DPFC_HT_MODIFY);
|
|
|
|
I915_WRITE(ILK_DPFC_RECOMP_CTL, DPFC_RECOMP_STALL_EN |
|
|
(stall_watermark << DPFC_RECOMP_STALL_WM_SHIFT) |
|
|
(interval << DPFC_RECOMP_TIMER_COUNT_SHIFT));
|
|
I915_WRITE(ILK_DPFC_FENCE_YOFF, crtc->y);
|
|
I915_WRITE(ILK_FBC_RT_BASE, obj->gtt_offset | ILK_FBC_RT_VALID);
|
|
/* enable it... */
|
|
I915_WRITE(ILK_DPFC_CONTROL, dpfc_ctl | DPFC_CTL_EN);
|
|
|
|
if (IS_GEN6(dev)) {
|
|
I915_WRITE(SNB_DPFC_CTL_SA,
|
|
SNB_CPU_FENCE_ENABLE | obj->fence_reg);
|
|
I915_WRITE(DPFC_CPU_FENCE_OFFSET, crtc->y);
|
|
sandybridge_blit_fbc_update(dev);
|
|
}
|
|
|
|
DRM_DEBUG_KMS("enabled fbc on plane %c\n", plane_name(intel_crtc->plane));
|
|
}
|
|
|
|
static void ironlake_disable_fbc(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
u32 dpfc_ctl;
|
|
|
|
/* Disable compression */
|
|
dpfc_ctl = I915_READ(ILK_DPFC_CONTROL);
|
|
if (dpfc_ctl & DPFC_CTL_EN) {
|
|
dpfc_ctl &= ~DPFC_CTL_EN;
|
|
I915_WRITE(ILK_DPFC_CONTROL, dpfc_ctl);
|
|
|
|
if (IS_IVYBRIDGE(dev))
|
|
/* WaFbcDisableDpfcClockGating:ivb */
|
|
I915_WRITE(ILK_DSPCLK_GATE_D,
|
|
I915_READ(ILK_DSPCLK_GATE_D) &
|
|
~ILK_DPFCUNIT_CLOCK_GATE_DISABLE);
|
|
|
|
if (IS_HASWELL(dev))
|
|
/* WaFbcDisableDpfcClockGating:hsw */
|
|
I915_WRITE(HSW_CLKGATE_DISABLE_PART_1,
|
|
I915_READ(HSW_CLKGATE_DISABLE_PART_1) &
|
|
~HSW_DPFC_GATING_DISABLE);
|
|
|
|
DRM_DEBUG_KMS("disabled FBC\n");
|
|
}
|
|
}
|
|
|
|
static bool ironlake_fbc_enabled(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
|
|
return I915_READ(ILK_DPFC_CONTROL) & DPFC_CTL_EN;
|
|
}
|
|
|
|
static void gen7_enable_fbc(struct drm_crtc *crtc, unsigned long interval)
|
|
{
|
|
struct drm_device *dev = crtc->dev;
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
struct drm_framebuffer *fb = crtc->fb;
|
|
struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb);
|
|
struct drm_i915_gem_object *obj = intel_fb->obj;
|
|
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
|
|
|
|
I915_WRITE(IVB_FBC_RT_BASE, obj->gtt_offset);
|
|
|
|
I915_WRITE(ILK_DPFC_CONTROL, DPFC_CTL_EN | DPFC_CTL_LIMIT_1X |
|
|
IVB_DPFC_CTL_FENCE_EN |
|
|
intel_crtc->plane << IVB_DPFC_CTL_PLANE_SHIFT);
|
|
|
|
if (IS_IVYBRIDGE(dev)) {
|
|
/* WaFbcAsynchFlipDisableFbcQueue:ivb */
|
|
I915_WRITE(ILK_DISPLAY_CHICKEN1, ILK_FBCQ_DIS);
|
|
/* WaFbcDisableDpfcClockGating:ivb */
|
|
I915_WRITE(ILK_DSPCLK_GATE_D,
|
|
I915_READ(ILK_DSPCLK_GATE_D) |
|
|
ILK_DPFCUNIT_CLOCK_GATE_DISABLE);
|
|
} else {
|
|
/* WaFbcAsynchFlipDisableFbcQueue:hsw */
|
|
I915_WRITE(HSW_PIPE_SLICE_CHICKEN_1(intel_crtc->pipe),
|
|
HSW_BYPASS_FBC_QUEUE);
|
|
/* WaFbcDisableDpfcClockGating:hsw */
|
|
I915_WRITE(HSW_CLKGATE_DISABLE_PART_1,
|
|
I915_READ(HSW_CLKGATE_DISABLE_PART_1) |
|
|
HSW_DPFC_GATING_DISABLE);
|
|
}
|
|
|
|
I915_WRITE(SNB_DPFC_CTL_SA,
|
|
SNB_CPU_FENCE_ENABLE | obj->fence_reg);
|
|
I915_WRITE(DPFC_CPU_FENCE_OFFSET, crtc->y);
|
|
|
|
sandybridge_blit_fbc_update(dev);
|
|
|
|
DRM_DEBUG_KMS("enabled fbc on plane %d\n", intel_crtc->plane);
|
|
}
|
|
|
|
bool intel_fbc_enabled(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
|
|
if (!dev_priv->display.fbc_enabled)
|
|
return false;
|
|
|
|
return dev_priv->display.fbc_enabled(dev);
|
|
}
|
|
|
|
static void intel_fbc_work_fn(struct work_struct *__work)
|
|
{
|
|
struct intel_fbc_work *work =
|
|
container_of(to_delayed_work(__work),
|
|
struct intel_fbc_work, work);
|
|
struct drm_device *dev = work->crtc->dev;
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
|
|
mutex_lock(&dev->struct_mutex);
|
|
if (work == dev_priv->fbc_work) {
|
|
/* Double check that we haven't switched fb without cancelling
|
|
* the prior work.
|
|
*/
|
|
if (work->crtc->fb == work->fb) {
|
|
dev_priv->display.enable_fbc(work->crtc,
|
|
work->interval);
|
|
|
|
dev_priv->cfb_plane = to_intel_crtc(work->crtc)->plane;
|
|
dev_priv->cfb_fb = work->crtc->fb->base.id;
|
|
dev_priv->cfb_y = work->crtc->y;
|
|
}
|
|
|
|
dev_priv->fbc_work = NULL;
|
|
}
|
|
mutex_unlock(&dev->struct_mutex);
|
|
|
|
kfree(work);
|
|
}
|
|
|
|
static void intel_cancel_fbc_work(struct drm_i915_private *dev_priv)
|
|
{
|
|
if (dev_priv->fbc_work == NULL)
|
|
return;
|
|
|
|
DRM_DEBUG_KMS("cancelling pending FBC enable\n");
|
|
|
|
/* Synchronisation is provided by struct_mutex and checking of
|
|
* dev_priv->fbc_work, so we can perform the cancellation
|
|
* entirely asynchronously.
|
|
*/
|
|
if (cancel_delayed_work(&dev_priv->fbc_work->work))
|
|
/* tasklet was killed before being run, clean up */
|
|
kfree(dev_priv->fbc_work);
|
|
|
|
/* Mark the work as no longer wanted so that if it does
|
|
* wake-up (because the work was already running and waiting
|
|
* for our mutex), it will discover that is no longer
|
|
* necessary to run.
|
|
*/
|
|
dev_priv->fbc_work = NULL;
|
|
}
|
|
|
|
void intel_enable_fbc(struct drm_crtc *crtc, unsigned long interval)
|
|
{
|
|
struct intel_fbc_work *work;
|
|
struct drm_device *dev = crtc->dev;
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
|
|
if (!dev_priv->display.enable_fbc)
|
|
return;
|
|
|
|
intel_cancel_fbc_work(dev_priv);
|
|
|
|
work = kzalloc(sizeof *work, GFP_KERNEL);
|
|
if (work == NULL) {
|
|
dev_priv->display.enable_fbc(crtc, interval);
|
|
return;
|
|
}
|
|
|
|
work->crtc = crtc;
|
|
work->fb = crtc->fb;
|
|
work->interval = interval;
|
|
INIT_DELAYED_WORK(&work->work, intel_fbc_work_fn);
|
|
|
|
dev_priv->fbc_work = work;
|
|
|
|
DRM_DEBUG_KMS("scheduling delayed FBC enable\n");
|
|
|
|
/* Delay the actual enabling to let pageflipping cease and the
|
|
* display to settle before starting the compression. Note that
|
|
* this delay also serves a second purpose: it allows for a
|
|
* vblank to pass after disabling the FBC before we attempt
|
|
* to modify the control registers.
|
|
*
|
|
* A more complicated solution would involve tracking vblanks
|
|
* following the termination of the page-flipping sequence
|
|
* and indeed performing the enable as a co-routine and not
|
|
* waiting synchronously upon the vblank.
|
|
*/
|
|
schedule_delayed_work(&work->work, msecs_to_jiffies(50));
|
|
}
|
|
|
|
void intel_disable_fbc(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
|
|
intel_cancel_fbc_work(dev_priv);
|
|
|
|
if (!dev_priv->display.disable_fbc)
|
|
return;
|
|
|
|
dev_priv->display.disable_fbc(dev);
|
|
dev_priv->cfb_plane = -1;
|
|
}
|
|
|
|
/**
|
|
* intel_update_fbc - enable/disable FBC as needed
|
|
* @dev: the drm_device
|
|
*
|
|
* Set up the framebuffer compression hardware at mode set time. We
|
|
* enable it if possible:
|
|
* - plane A only (on pre-965)
|
|
* - no pixel mulitply/line duplication
|
|
* - no alpha buffer discard
|
|
* - no dual wide
|
|
* - framebuffer <= max_hdisplay in width, max_vdisplay in height
|
|
*
|
|
* We can't assume that any compression will take place (worst case),
|
|
* so the compressed buffer has to be the same size as the uncompressed
|
|
* one. It also must reside (along with the line length buffer) in
|
|
* stolen memory.
|
|
*
|
|
* We need to enable/disable FBC on a global basis.
|
|
*/
|
|
void intel_update_fbc(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
struct drm_crtc *crtc = NULL, *tmp_crtc;
|
|
struct intel_crtc *intel_crtc;
|
|
struct drm_framebuffer *fb;
|
|
struct intel_framebuffer *intel_fb;
|
|
struct drm_i915_gem_object *obj;
|
|
int enable_fbc;
|
|
unsigned int max_hdisplay, max_vdisplay;
|
|
|
|
if (!i915_powersave)
|
|
return;
|
|
|
|
if (!I915_HAS_FBC(dev))
|
|
return;
|
|
|
|
/*
|
|
* If FBC is already on, we just have to verify that we can
|
|
* keep it that way...
|
|
* Need to disable if:
|
|
* - more than one pipe is active
|
|
* - changing FBC params (stride, fence, mode)
|
|
* - new fb is too large to fit in compressed buffer
|
|
* - going to an unsupported config (interlace, pixel multiply, etc.)
|
|
*/
|
|
list_for_each_entry(tmp_crtc, &dev->mode_config.crtc_list, head) {
|
|
if (intel_crtc_active(tmp_crtc) &&
|
|
!to_intel_crtc(tmp_crtc)->primary_disabled) {
|
|
if (crtc) {
|
|
DRM_DEBUG_KMS("more than one pipe active, disabling compression\n");
|
|
dev_priv->no_fbc_reason = FBC_MULTIPLE_PIPES;
|
|
goto out_disable;
|
|
}
|
|
crtc = tmp_crtc;
|
|
}
|
|
}
|
|
|
|
if (!crtc || crtc->fb == NULL) {
|
|
DRM_DEBUG_KMS("no output, disabling\n");
|
|
dev_priv->no_fbc_reason = FBC_NO_OUTPUT;
|
|
goto out_disable;
|
|
}
|
|
|
|
intel_crtc = to_intel_crtc(crtc);
|
|
fb = crtc->fb;
|
|
intel_fb = to_intel_framebuffer(fb);
|
|
obj = intel_fb->obj;
|
|
|
|
enable_fbc = i915_enable_fbc;
|
|
if (enable_fbc < 0) {
|
|
DRM_DEBUG_KMS("fbc set to per-chip default\n");
|
|
enable_fbc = 1;
|
|
if (INTEL_INFO(dev)->gen <= 7 && !IS_HASWELL(dev))
|
|
enable_fbc = 0;
|
|
}
|
|
if (!enable_fbc) {
|
|
DRM_DEBUG_KMS("fbc disabled per module param\n");
|
|
dev_priv->no_fbc_reason = FBC_MODULE_PARAM;
|
|
goto out_disable;
|
|
}
|
|
if ((crtc->mode.flags & DRM_MODE_FLAG_INTERLACE) ||
|
|
(crtc->mode.flags & DRM_MODE_FLAG_DBLSCAN)) {
|
|
DRM_DEBUG_KMS("mode incompatible with compression, "
|
|
"disabling\n");
|
|
dev_priv->no_fbc_reason = FBC_UNSUPPORTED_MODE;
|
|
goto out_disable;
|
|
}
|
|
|
|
if (IS_G4X(dev) || INTEL_INFO(dev)->gen >= 5) {
|
|
max_hdisplay = 4096;
|
|
max_vdisplay = 2048;
|
|
} else {
|
|
max_hdisplay = 2048;
|
|
max_vdisplay = 1536;
|
|
}
|
|
if ((crtc->mode.hdisplay > max_hdisplay) ||
|
|
(crtc->mode.vdisplay > max_vdisplay)) {
|
|
DRM_DEBUG_KMS("mode too large for compression, disabling\n");
|
|
dev_priv->no_fbc_reason = FBC_MODE_TOO_LARGE;
|
|
goto out_disable;
|
|
}
|
|
if ((IS_I915GM(dev) || IS_I945GM(dev) || IS_HASWELL(dev)) &&
|
|
intel_crtc->plane != 0) {
|
|
DRM_DEBUG_KMS("plane not 0, disabling compression\n");
|
|
dev_priv->no_fbc_reason = FBC_BAD_PLANE;
|
|
goto out_disable;
|
|
}
|
|
|
|
/* The use of a CPU fence is mandatory in order to detect writes
|
|
* by the CPU to the scanout and trigger updates to the FBC.
|
|
*/
|
|
if (obj->tiling_mode != I915_TILING_X ||
|
|
obj->fence_reg == I915_FENCE_REG_NONE) {
|
|
DRM_DEBUG_KMS("framebuffer not tiled or fenced, disabling compression\n");
|
|
dev_priv->no_fbc_reason = FBC_NOT_TILED;
|
|
goto out_disable;
|
|
}
|
|
|
|
/* If the kernel debugger is active, always disable compression */
|
|
if (in_dbg_master())
|
|
goto out_disable;
|
|
|
|
if (i915_gem_stolen_setup_compression(dev, intel_fb->obj->base.size)) {
|
|
DRM_DEBUG_KMS("framebuffer too large, disabling compression\n");
|
|
dev_priv->no_fbc_reason = FBC_STOLEN_TOO_SMALL;
|
|
goto out_disable;
|
|
}
|
|
|
|
/* If the scanout has not changed, don't modify the FBC settings.
|
|
* Note that we make the fundamental assumption that the fb->obj
|
|
* cannot be unpinned (and have its GTT offset and fence revoked)
|
|
* without first being decoupled from the scanout and FBC disabled.
|
|
*/
|
|
if (dev_priv->cfb_plane == intel_crtc->plane &&
|
|
dev_priv->cfb_fb == fb->base.id &&
|
|
dev_priv->cfb_y == crtc->y)
|
|
return;
|
|
|
|
if (intel_fbc_enabled(dev)) {
|
|
/* We update FBC along two paths, after changing fb/crtc
|
|
* configuration (modeswitching) and after page-flipping
|
|
* finishes. For the latter, we know that not only did
|
|
* we disable the FBC at the start of the page-flip
|
|
* sequence, but also more than one vblank has passed.
|
|
*
|
|
* For the former case of modeswitching, it is possible
|
|
* to switch between two FBC valid configurations
|
|
* instantaneously so we do need to disable the FBC
|
|
* before we can modify its control registers. We also
|
|
* have to wait for the next vblank for that to take
|
|
* effect. However, since we delay enabling FBC we can
|
|
* assume that a vblank has passed since disabling and
|
|
* that we can safely alter the registers in the deferred
|
|
* callback.
|
|
*
|
|
* In the scenario that we go from a valid to invalid
|
|
* and then back to valid FBC configuration we have
|
|
* no strict enforcement that a vblank occurred since
|
|
* disabling the FBC. However, along all current pipe
|
|
* disabling paths we do need to wait for a vblank at
|
|
* some point. And we wait before enabling FBC anyway.
|
|
*/
|
|
DRM_DEBUG_KMS("disabling active FBC for update\n");
|
|
intel_disable_fbc(dev);
|
|
}
|
|
|
|
intel_enable_fbc(crtc, 500);
|
|
return;
|
|
|
|
out_disable:
|
|
/* Multiple disables should be harmless */
|
|
if (intel_fbc_enabled(dev)) {
|
|
DRM_DEBUG_KMS("unsupported config, disabling FBC\n");
|
|
intel_disable_fbc(dev);
|
|
}
|
|
i915_gem_stolen_cleanup_compression(dev);
|
|
}
|
|
|
|
static void i915_pineview_get_mem_freq(struct drm_device *dev)
|
|
{
|
|
drm_i915_private_t *dev_priv = dev->dev_private;
|
|
u32 tmp;
|
|
|
|
tmp = I915_READ(CLKCFG);
|
|
|
|
switch (tmp & CLKCFG_FSB_MASK) {
|
|
case CLKCFG_FSB_533:
|
|
dev_priv->fsb_freq = 533; /* 133*4 */
|
|
break;
|
|
case CLKCFG_FSB_800:
|
|
dev_priv->fsb_freq = 800; /* 200*4 */
|
|
break;
|
|
case CLKCFG_FSB_667:
|
|
dev_priv->fsb_freq = 667; /* 167*4 */
|
|
break;
|
|
case CLKCFG_FSB_400:
|
|
dev_priv->fsb_freq = 400; /* 100*4 */
|
|
break;
|
|
}
|
|
|
|
switch (tmp & CLKCFG_MEM_MASK) {
|
|
case CLKCFG_MEM_533:
|
|
dev_priv->mem_freq = 533;
|
|
break;
|
|
case CLKCFG_MEM_667:
|
|
dev_priv->mem_freq = 667;
|
|
break;
|
|
case CLKCFG_MEM_800:
|
|
dev_priv->mem_freq = 800;
|
|
break;
|
|
}
|
|
|
|
/* detect pineview DDR3 setting */
|
|
tmp = I915_READ(CSHRDDR3CTL);
|
|
dev_priv->is_ddr3 = (tmp & CSHRDDR3CTL_DDR3) ? 1 : 0;
|
|
}
|
|
|
|
static void i915_ironlake_get_mem_freq(struct drm_device *dev)
|
|
{
|
|
drm_i915_private_t *dev_priv = dev->dev_private;
|
|
u16 ddrpll, csipll;
|
|
|
|
ddrpll = I915_READ16(DDRMPLL1);
|
|
csipll = I915_READ16(CSIPLL0);
|
|
|
|
switch (ddrpll & 0xff) {
|
|
case 0xc:
|
|
dev_priv->mem_freq = 800;
|
|
break;
|
|
case 0x10:
|
|
dev_priv->mem_freq = 1066;
|
|
break;
|
|
case 0x14:
|
|
dev_priv->mem_freq = 1333;
|
|
break;
|
|
case 0x18:
|
|
dev_priv->mem_freq = 1600;
|
|
break;
|
|
default:
|
|
DRM_DEBUG_DRIVER("unknown memory frequency 0x%02x\n",
|
|
ddrpll & 0xff);
|
|
dev_priv->mem_freq = 0;
|
|
break;
|
|
}
|
|
|
|
dev_priv->ips.r_t = dev_priv->mem_freq;
|
|
|
|
switch (csipll & 0x3ff) {
|
|
case 0x00c:
|
|
dev_priv->fsb_freq = 3200;
|
|
break;
|
|
case 0x00e:
|
|
dev_priv->fsb_freq = 3733;
|
|
break;
|
|
case 0x010:
|
|
dev_priv->fsb_freq = 4266;
|
|
break;
|
|
case 0x012:
|
|
dev_priv->fsb_freq = 4800;
|
|
break;
|
|
case 0x014:
|
|
dev_priv->fsb_freq = 5333;
|
|
break;
|
|
case 0x016:
|
|
dev_priv->fsb_freq = 5866;
|
|
break;
|
|
case 0x018:
|
|
dev_priv->fsb_freq = 6400;
|
|
break;
|
|
default:
|
|
DRM_DEBUG_DRIVER("unknown fsb frequency 0x%04x\n",
|
|
csipll & 0x3ff);
|
|
dev_priv->fsb_freq = 0;
|
|
break;
|
|
}
|
|
|
|
if (dev_priv->fsb_freq == 3200) {
|
|
dev_priv->ips.c_m = 0;
|
|
} else if (dev_priv->fsb_freq > 3200 && dev_priv->fsb_freq <= 4800) {
|
|
dev_priv->ips.c_m = 1;
|
|
} else {
|
|
dev_priv->ips.c_m = 2;
|
|
}
|
|
}
|
|
|
|
static const struct cxsr_latency cxsr_latency_table[] = {
|
|
{1, 0, 800, 400, 3382, 33382, 3983, 33983}, /* DDR2-400 SC */
|
|
{1, 0, 800, 667, 3354, 33354, 3807, 33807}, /* DDR2-667 SC */
|
|
{1, 0, 800, 800, 3347, 33347, 3763, 33763}, /* DDR2-800 SC */
|
|
{1, 1, 800, 667, 6420, 36420, 6873, 36873}, /* DDR3-667 SC */
|
|
{1, 1, 800, 800, 5902, 35902, 6318, 36318}, /* DDR3-800 SC */
|
|
|
|
{1, 0, 667, 400, 3400, 33400, 4021, 34021}, /* DDR2-400 SC */
|
|
{1, 0, 667, 667, 3372, 33372, 3845, 33845}, /* DDR2-667 SC */
|
|
{1, 0, 667, 800, 3386, 33386, 3822, 33822}, /* DDR2-800 SC */
|
|
{1, 1, 667, 667, 6438, 36438, 6911, 36911}, /* DDR3-667 SC */
|
|
{1, 1, 667, 800, 5941, 35941, 6377, 36377}, /* DDR3-800 SC */
|
|
|
|
{1, 0, 400, 400, 3472, 33472, 4173, 34173}, /* DDR2-400 SC */
|
|
{1, 0, 400, 667, 3443, 33443, 3996, 33996}, /* DDR2-667 SC */
|
|
{1, 0, 400, 800, 3430, 33430, 3946, 33946}, /* DDR2-800 SC */
|
|
{1, 1, 400, 667, 6509, 36509, 7062, 37062}, /* DDR3-667 SC */
|
|
{1, 1, 400, 800, 5985, 35985, 6501, 36501}, /* DDR3-800 SC */
|
|
|
|
{0, 0, 800, 400, 3438, 33438, 4065, 34065}, /* DDR2-400 SC */
|
|
{0, 0, 800, 667, 3410, 33410, 3889, 33889}, /* DDR2-667 SC */
|
|
{0, 0, 800, 800, 3403, 33403, 3845, 33845}, /* DDR2-800 SC */
|
|
{0, 1, 800, 667, 6476, 36476, 6955, 36955}, /* DDR3-667 SC */
|
|
{0, 1, 800, 800, 5958, 35958, 6400, 36400}, /* DDR3-800 SC */
|
|
|
|
{0, 0, 667, 400, 3456, 33456, 4103, 34106}, /* DDR2-400 SC */
|
|
{0, 0, 667, 667, 3428, 33428, 3927, 33927}, /* DDR2-667 SC */
|
|
{0, 0, 667, 800, 3443, 33443, 3905, 33905}, /* DDR2-800 SC */
|
|
{0, 1, 667, 667, 6494, 36494, 6993, 36993}, /* DDR3-667 SC */
|
|
{0, 1, 667, 800, 5998, 35998, 6460, 36460}, /* DDR3-800 SC */
|
|
|
|
{0, 0, 400, 400, 3528, 33528, 4255, 34255}, /* DDR2-400 SC */
|
|
{0, 0, 400, 667, 3500, 33500, 4079, 34079}, /* DDR2-667 SC */
|
|
{0, 0, 400, 800, 3487, 33487, 4029, 34029}, /* DDR2-800 SC */
|
|
{0, 1, 400, 667, 6566, 36566, 7145, 37145}, /* DDR3-667 SC */
|
|
{0, 1, 400, 800, 6042, 36042, 6584, 36584}, /* DDR3-800 SC */
|
|
};
|
|
|
|
static const struct cxsr_latency *intel_get_cxsr_latency(int is_desktop,
|
|
int is_ddr3,
|
|
int fsb,
|
|
int mem)
|
|
{
|
|
const struct cxsr_latency *latency;
|
|
int i;
|
|
|
|
if (fsb == 0 || mem == 0)
|
|
return NULL;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(cxsr_latency_table); i++) {
|
|
latency = &cxsr_latency_table[i];
|
|
if (is_desktop == latency->is_desktop &&
|
|
is_ddr3 == latency->is_ddr3 &&
|
|
fsb == latency->fsb_freq && mem == latency->mem_freq)
|
|
return latency;
|
|
}
|
|
|
|
DRM_DEBUG_KMS("Unknown FSB/MEM found, disable CxSR\n");
|
|
|
|
return NULL;
|
|
}
|
|
|
|
static void pineview_disable_cxsr(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
|
|
/* deactivate cxsr */
|
|
I915_WRITE(DSPFW3, I915_READ(DSPFW3) & ~PINEVIEW_SELF_REFRESH_EN);
|
|
}
|
|
|
|
/*
|
|
* Latency for FIFO fetches is dependent on several factors:
|
|
* - memory configuration (speed, channels)
|
|
* - chipset
|
|
* - current MCH state
|
|
* It can be fairly high in some situations, so here we assume a fairly
|
|
* pessimal value. It's a tradeoff between extra memory fetches (if we
|
|
* set this value too high, the FIFO will fetch frequently to stay full)
|
|
* and power consumption (set it too low to save power and we might see
|
|
* FIFO underruns and display "flicker").
|
|
*
|
|
* A value of 5us seems to be a good balance; safe for very low end
|
|
* platforms but not overly aggressive on lower latency configs.
|
|
*/
|
|
static const int latency_ns = 5000;
|
|
|
|
static int i9xx_get_fifo_size(struct drm_device *dev, int plane)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
uint32_t dsparb = I915_READ(DSPARB);
|
|
int size;
|
|
|
|
size = dsparb & 0x7f;
|
|
if (plane)
|
|
size = ((dsparb >> DSPARB_CSTART_SHIFT) & 0x7f) - size;
|
|
|
|
DRM_DEBUG_KMS("FIFO size - (0x%08x) %s: %d\n", dsparb,
|
|
plane ? "B" : "A", size);
|
|
|
|
return size;
|
|
}
|
|
|
|
static int i85x_get_fifo_size(struct drm_device *dev, int plane)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
uint32_t dsparb = I915_READ(DSPARB);
|
|
int size;
|
|
|
|
size = dsparb & 0x1ff;
|
|
if (plane)
|
|
size = ((dsparb >> DSPARB_BEND_SHIFT) & 0x1ff) - size;
|
|
size >>= 1; /* Convert to cachelines */
|
|
|
|
DRM_DEBUG_KMS("FIFO size - (0x%08x) %s: %d\n", dsparb,
|
|
plane ? "B" : "A", size);
|
|
|
|
return size;
|
|
}
|
|
|
|
static int i845_get_fifo_size(struct drm_device *dev, int plane)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
uint32_t dsparb = I915_READ(DSPARB);
|
|
int size;
|
|
|
|
size = dsparb & 0x7f;
|
|
size >>= 2; /* Convert to cachelines */
|
|
|
|
DRM_DEBUG_KMS("FIFO size - (0x%08x) %s: %d\n", dsparb,
|
|
plane ? "B" : "A",
|
|
size);
|
|
|
|
return size;
|
|
}
|
|
|
|
static int i830_get_fifo_size(struct drm_device *dev, int plane)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
uint32_t dsparb = I915_READ(DSPARB);
|
|
int size;
|
|
|
|
size = dsparb & 0x7f;
|
|
size >>= 1; /* Convert to cachelines */
|
|
|
|
DRM_DEBUG_KMS("FIFO size - (0x%08x) %s: %d\n", dsparb,
|
|
plane ? "B" : "A", size);
|
|
|
|
return size;
|
|
}
|
|
|
|
/* Pineview has different values for various configs */
|
|
static const struct intel_watermark_params pineview_display_wm = {
|
|
PINEVIEW_DISPLAY_FIFO,
|
|
PINEVIEW_MAX_WM,
|
|
PINEVIEW_DFT_WM,
|
|
PINEVIEW_GUARD_WM,
|
|
PINEVIEW_FIFO_LINE_SIZE
|
|
};
|
|
static const struct intel_watermark_params pineview_display_hplloff_wm = {
|
|
PINEVIEW_DISPLAY_FIFO,
|
|
PINEVIEW_MAX_WM,
|
|
PINEVIEW_DFT_HPLLOFF_WM,
|
|
PINEVIEW_GUARD_WM,
|
|
PINEVIEW_FIFO_LINE_SIZE
|
|
};
|
|
static const struct intel_watermark_params pineview_cursor_wm = {
|
|
PINEVIEW_CURSOR_FIFO,
|
|
PINEVIEW_CURSOR_MAX_WM,
|
|
PINEVIEW_CURSOR_DFT_WM,
|
|
PINEVIEW_CURSOR_GUARD_WM,
|
|
PINEVIEW_FIFO_LINE_SIZE,
|
|
};
|
|
static const struct intel_watermark_params pineview_cursor_hplloff_wm = {
|
|
PINEVIEW_CURSOR_FIFO,
|
|
PINEVIEW_CURSOR_MAX_WM,
|
|
PINEVIEW_CURSOR_DFT_WM,
|
|
PINEVIEW_CURSOR_GUARD_WM,
|
|
PINEVIEW_FIFO_LINE_SIZE
|
|
};
|
|
static const struct intel_watermark_params g4x_wm_info = {
|
|
G4X_FIFO_SIZE,
|
|
G4X_MAX_WM,
|
|
G4X_MAX_WM,
|
|
2,
|
|
G4X_FIFO_LINE_SIZE,
|
|
};
|
|
static const struct intel_watermark_params g4x_cursor_wm_info = {
|
|
I965_CURSOR_FIFO,
|
|
I965_CURSOR_MAX_WM,
|
|
I965_CURSOR_DFT_WM,
|
|
2,
|
|
G4X_FIFO_LINE_SIZE,
|
|
};
|
|
static const struct intel_watermark_params valleyview_wm_info = {
|
|
VALLEYVIEW_FIFO_SIZE,
|
|
VALLEYVIEW_MAX_WM,
|
|
VALLEYVIEW_MAX_WM,
|
|
2,
|
|
G4X_FIFO_LINE_SIZE,
|
|
};
|
|
static const struct intel_watermark_params valleyview_cursor_wm_info = {
|
|
I965_CURSOR_FIFO,
|
|
VALLEYVIEW_CURSOR_MAX_WM,
|
|
I965_CURSOR_DFT_WM,
|
|
2,
|
|
G4X_FIFO_LINE_SIZE,
|
|
};
|
|
static const struct intel_watermark_params i965_cursor_wm_info = {
|
|
I965_CURSOR_FIFO,
|
|
I965_CURSOR_MAX_WM,
|
|
I965_CURSOR_DFT_WM,
|
|
2,
|
|
I915_FIFO_LINE_SIZE,
|
|
};
|
|
static const struct intel_watermark_params i945_wm_info = {
|
|
I945_FIFO_SIZE,
|
|
I915_MAX_WM,
|
|
1,
|
|
2,
|
|
I915_FIFO_LINE_SIZE
|
|
};
|
|
static const struct intel_watermark_params i915_wm_info = {
|
|
I915_FIFO_SIZE,
|
|
I915_MAX_WM,
|
|
1,
|
|
2,
|
|
I915_FIFO_LINE_SIZE
|
|
};
|
|
static const struct intel_watermark_params i855_wm_info = {
|
|
I855GM_FIFO_SIZE,
|
|
I915_MAX_WM,
|
|
1,
|
|
2,
|
|
I830_FIFO_LINE_SIZE
|
|
};
|
|
static const struct intel_watermark_params i830_wm_info = {
|
|
I830_FIFO_SIZE,
|
|
I915_MAX_WM,
|
|
1,
|
|
2,
|
|
I830_FIFO_LINE_SIZE
|
|
};
|
|
|
|
static const struct intel_watermark_params ironlake_display_wm_info = {
|
|
ILK_DISPLAY_FIFO,
|
|
ILK_DISPLAY_MAXWM,
|
|
ILK_DISPLAY_DFTWM,
|
|
2,
|
|
ILK_FIFO_LINE_SIZE
|
|
};
|
|
static const struct intel_watermark_params ironlake_cursor_wm_info = {
|
|
ILK_CURSOR_FIFO,
|
|
ILK_CURSOR_MAXWM,
|
|
ILK_CURSOR_DFTWM,
|
|
2,
|
|
ILK_FIFO_LINE_SIZE
|
|
};
|
|
static const struct intel_watermark_params ironlake_display_srwm_info = {
|
|
ILK_DISPLAY_SR_FIFO,
|
|
ILK_DISPLAY_MAX_SRWM,
|
|
ILK_DISPLAY_DFT_SRWM,
|
|
2,
|
|
ILK_FIFO_LINE_SIZE
|
|
};
|
|
static const struct intel_watermark_params ironlake_cursor_srwm_info = {
|
|
ILK_CURSOR_SR_FIFO,
|
|
ILK_CURSOR_MAX_SRWM,
|
|
ILK_CURSOR_DFT_SRWM,
|
|
2,
|
|
ILK_FIFO_LINE_SIZE
|
|
};
|
|
|
|
static const struct intel_watermark_params sandybridge_display_wm_info = {
|
|
SNB_DISPLAY_FIFO,
|
|
SNB_DISPLAY_MAXWM,
|
|
SNB_DISPLAY_DFTWM,
|
|
2,
|
|
SNB_FIFO_LINE_SIZE
|
|
};
|
|
static const struct intel_watermark_params sandybridge_cursor_wm_info = {
|
|
SNB_CURSOR_FIFO,
|
|
SNB_CURSOR_MAXWM,
|
|
SNB_CURSOR_DFTWM,
|
|
2,
|
|
SNB_FIFO_LINE_SIZE
|
|
};
|
|
static const struct intel_watermark_params sandybridge_display_srwm_info = {
|
|
SNB_DISPLAY_SR_FIFO,
|
|
SNB_DISPLAY_MAX_SRWM,
|
|
SNB_DISPLAY_DFT_SRWM,
|
|
2,
|
|
SNB_FIFO_LINE_SIZE
|
|
};
|
|
static const struct intel_watermark_params sandybridge_cursor_srwm_info = {
|
|
SNB_CURSOR_SR_FIFO,
|
|
SNB_CURSOR_MAX_SRWM,
|
|
SNB_CURSOR_DFT_SRWM,
|
|
2,
|
|
SNB_FIFO_LINE_SIZE
|
|
};
|
|
|
|
|
|
/**
|
|
* intel_calculate_wm - calculate watermark level
|
|
* @clock_in_khz: pixel clock
|
|
* @wm: chip FIFO params
|
|
* @pixel_size: display pixel size
|
|
* @latency_ns: memory latency for the platform
|
|
*
|
|
* Calculate the watermark level (the level at which the display plane will
|
|
* start fetching from memory again). Each chip has a different display
|
|
* FIFO size and allocation, so the caller needs to figure that out and pass
|
|
* in the correct intel_watermark_params structure.
|
|
*
|
|
* As the pixel clock runs, the FIFO will be drained at a rate that depends
|
|
* on the pixel size. When it reaches the watermark level, it'll start
|
|
* fetching FIFO line sized based chunks from memory until the FIFO fills
|
|
* past the watermark point. If the FIFO drains completely, a FIFO underrun
|
|
* will occur, and a display engine hang could result.
|
|
*/
|
|
static unsigned long intel_calculate_wm(unsigned long clock_in_khz,
|
|
const struct intel_watermark_params *wm,
|
|
int fifo_size,
|
|
int pixel_size,
|
|
unsigned long latency_ns)
|
|
{
|
|
long entries_required, wm_size;
|
|
|
|
/*
|
|
* Note: we need to make sure we don't overflow for various clock &
|
|
* latency values.
|
|
* clocks go from a few thousand to several hundred thousand.
|
|
* latency is usually a few thousand
|
|
*/
|
|
entries_required = ((clock_in_khz / 1000) * pixel_size * latency_ns) /
|
|
1000;
|
|
entries_required = DIV_ROUND_UP(entries_required, wm->cacheline_size);
|
|
|
|
DRM_DEBUG_KMS("FIFO entries required for mode: %ld\n", entries_required);
|
|
|
|
wm_size = fifo_size - (entries_required + wm->guard_size);
|
|
|
|
DRM_DEBUG_KMS("FIFO watermark level: %ld\n", wm_size);
|
|
|
|
/* Don't promote wm_size to unsigned... */
|
|
if (wm_size > (long)wm->max_wm)
|
|
wm_size = wm->max_wm;
|
|
if (wm_size <= 0)
|
|
wm_size = wm->default_wm;
|
|
return wm_size;
|
|
}
|
|
|
|
static struct drm_crtc *single_enabled_crtc(struct drm_device *dev)
|
|
{
|
|
struct drm_crtc *crtc, *enabled = NULL;
|
|
|
|
list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
|
|
if (intel_crtc_active(crtc)) {
|
|
if (enabled)
|
|
return NULL;
|
|
enabled = crtc;
|
|
}
|
|
}
|
|
|
|
return enabled;
|
|
}
|
|
|
|
static void pineview_update_wm(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
struct drm_crtc *crtc;
|
|
const struct cxsr_latency *latency;
|
|
u32 reg;
|
|
unsigned long wm;
|
|
|
|
latency = intel_get_cxsr_latency(IS_PINEVIEW_G(dev), dev_priv->is_ddr3,
|
|
dev_priv->fsb_freq, dev_priv->mem_freq);
|
|
if (!latency) {
|
|
DRM_DEBUG_KMS("Unknown FSB/MEM found, disable CxSR\n");
|
|
pineview_disable_cxsr(dev);
|
|
return;
|
|
}
|
|
|
|
crtc = single_enabled_crtc(dev);
|
|
if (crtc) {
|
|
int clock = crtc->mode.clock;
|
|
int pixel_size = crtc->fb->bits_per_pixel / 8;
|
|
|
|
/* Display SR */
|
|
wm = intel_calculate_wm(clock, &pineview_display_wm,
|
|
pineview_display_wm.fifo_size,
|
|
pixel_size, latency->display_sr);
|
|
reg = I915_READ(DSPFW1);
|
|
reg &= ~DSPFW_SR_MASK;
|
|
reg |= wm << DSPFW_SR_SHIFT;
|
|
I915_WRITE(DSPFW1, reg);
|
|
DRM_DEBUG_KMS("DSPFW1 register is %x\n", reg);
|
|
|
|
/* cursor SR */
|
|
wm = intel_calculate_wm(clock, &pineview_cursor_wm,
|
|
pineview_display_wm.fifo_size,
|
|
pixel_size, latency->cursor_sr);
|
|
reg = I915_READ(DSPFW3);
|
|
reg &= ~DSPFW_CURSOR_SR_MASK;
|
|
reg |= (wm & 0x3f) << DSPFW_CURSOR_SR_SHIFT;
|
|
I915_WRITE(DSPFW3, reg);
|
|
|
|
/* Display HPLL off SR */
|
|
wm = intel_calculate_wm(clock, &pineview_display_hplloff_wm,
|
|
pineview_display_hplloff_wm.fifo_size,
|
|
pixel_size, latency->display_hpll_disable);
|
|
reg = I915_READ(DSPFW3);
|
|
reg &= ~DSPFW_HPLL_SR_MASK;
|
|
reg |= wm & DSPFW_HPLL_SR_MASK;
|
|
I915_WRITE(DSPFW3, reg);
|
|
|
|
/* cursor HPLL off SR */
|
|
wm = intel_calculate_wm(clock, &pineview_cursor_hplloff_wm,
|
|
pineview_display_hplloff_wm.fifo_size,
|
|
pixel_size, latency->cursor_hpll_disable);
|
|
reg = I915_READ(DSPFW3);
|
|
reg &= ~DSPFW_HPLL_CURSOR_MASK;
|
|
reg |= (wm & 0x3f) << DSPFW_HPLL_CURSOR_SHIFT;
|
|
I915_WRITE(DSPFW3, reg);
|
|
DRM_DEBUG_KMS("DSPFW3 register is %x\n", reg);
|
|
|
|
/* activate cxsr */
|
|
I915_WRITE(DSPFW3,
|
|
I915_READ(DSPFW3) | PINEVIEW_SELF_REFRESH_EN);
|
|
DRM_DEBUG_KMS("Self-refresh is enabled\n");
|
|
} else {
|
|
pineview_disable_cxsr(dev);
|
|
DRM_DEBUG_KMS("Self-refresh is disabled\n");
|
|
}
|
|
}
|
|
|
|
static bool g4x_compute_wm0(struct drm_device *dev,
|
|
int plane,
|
|
const struct intel_watermark_params *display,
|
|
int display_latency_ns,
|
|
const struct intel_watermark_params *cursor,
|
|
int cursor_latency_ns,
|
|
int *plane_wm,
|
|
int *cursor_wm)
|
|
{
|
|
struct drm_crtc *crtc;
|
|
int htotal, hdisplay, clock, pixel_size;
|
|
int line_time_us, line_count;
|
|
int entries, tlb_miss;
|
|
|
|
crtc = intel_get_crtc_for_plane(dev, plane);
|
|
if (!intel_crtc_active(crtc)) {
|
|
*cursor_wm = cursor->guard_size;
|
|
*plane_wm = display->guard_size;
|
|
return false;
|
|
}
|
|
|
|
htotal = crtc->mode.htotal;
|
|
hdisplay = crtc->mode.hdisplay;
|
|
clock = crtc->mode.clock;
|
|
pixel_size = crtc->fb->bits_per_pixel / 8;
|
|
|
|
/* Use the small buffer method to calculate plane watermark */
|
|
entries = ((clock * pixel_size / 1000) * display_latency_ns) / 1000;
|
|
tlb_miss = display->fifo_size*display->cacheline_size - hdisplay * 8;
|
|
if (tlb_miss > 0)
|
|
entries += tlb_miss;
|
|
entries = DIV_ROUND_UP(entries, display->cacheline_size);
|
|
*plane_wm = entries + display->guard_size;
|
|
if (*plane_wm > (int)display->max_wm)
|
|
*plane_wm = display->max_wm;
|
|
|
|
/* Use the large buffer method to calculate cursor watermark */
|
|
line_time_us = ((htotal * 1000) / clock);
|
|
line_count = (cursor_latency_ns / line_time_us + 1000) / 1000;
|
|
entries = line_count * 64 * pixel_size;
|
|
tlb_miss = cursor->fifo_size*cursor->cacheline_size - hdisplay * 8;
|
|
if (tlb_miss > 0)
|
|
entries += tlb_miss;
|
|
entries = DIV_ROUND_UP(entries, cursor->cacheline_size);
|
|
*cursor_wm = entries + cursor->guard_size;
|
|
if (*cursor_wm > (int)cursor->max_wm)
|
|
*cursor_wm = (int)cursor->max_wm;
|
|
|
|
return true;
|
|
}
|
|
|
|
/*
|
|
* Check the wm result.
|
|
*
|
|
* If any calculated watermark values is larger than the maximum value that
|
|
* can be programmed into the associated watermark register, that watermark
|
|
* must be disabled.
|
|
*/
|
|
static bool g4x_check_srwm(struct drm_device *dev,
|
|
int display_wm, int cursor_wm,
|
|
const struct intel_watermark_params *display,
|
|
const struct intel_watermark_params *cursor)
|
|
{
|
|
DRM_DEBUG_KMS("SR watermark: display plane %d, cursor %d\n",
|
|
display_wm, cursor_wm);
|
|
|
|
if (display_wm > display->max_wm) {
|
|
DRM_DEBUG_KMS("display watermark is too large(%d/%ld), disabling\n",
|
|
display_wm, display->max_wm);
|
|
return false;
|
|
}
|
|
|
|
if (cursor_wm > cursor->max_wm) {
|
|
DRM_DEBUG_KMS("cursor watermark is too large(%d/%ld), disabling\n",
|
|
cursor_wm, cursor->max_wm);
|
|
return false;
|
|
}
|
|
|
|
if (!(display_wm || cursor_wm)) {
|
|
DRM_DEBUG_KMS("SR latency is 0, disabling\n");
|
|
return false;
|
|
}
|
|
|
|
return true;
|
|
}
|
|
|
|
static bool g4x_compute_srwm(struct drm_device *dev,
|
|
int plane,
|
|
int latency_ns,
|
|
const struct intel_watermark_params *display,
|
|
const struct intel_watermark_params *cursor,
|
|
int *display_wm, int *cursor_wm)
|
|
{
|
|
struct drm_crtc *crtc;
|
|
int hdisplay, htotal, pixel_size, clock;
|
|
unsigned long line_time_us;
|
|
int line_count, line_size;
|
|
int small, large;
|
|
int entries;
|
|
|
|
if (!latency_ns) {
|
|
*display_wm = *cursor_wm = 0;
|
|
return false;
|
|
}
|
|
|
|
crtc = intel_get_crtc_for_plane(dev, plane);
|
|
hdisplay = crtc->mode.hdisplay;
|
|
htotal = crtc->mode.htotal;
|
|
clock = crtc->mode.clock;
|
|
pixel_size = crtc->fb->bits_per_pixel / 8;
|
|
|
|
line_time_us = (htotal * 1000) / clock;
|
|
line_count = (latency_ns / line_time_us + 1000) / 1000;
|
|
line_size = hdisplay * pixel_size;
|
|
|
|
/* Use the minimum of the small and large buffer method for primary */
|
|
small = ((clock * pixel_size / 1000) * latency_ns) / 1000;
|
|
large = line_count * line_size;
|
|
|
|
entries = DIV_ROUND_UP(min(small, large), display->cacheline_size);
|
|
*display_wm = entries + display->guard_size;
|
|
|
|
/* calculate the self-refresh watermark for display cursor */
|
|
entries = line_count * pixel_size * 64;
|
|
entries = DIV_ROUND_UP(entries, cursor->cacheline_size);
|
|
*cursor_wm = entries + cursor->guard_size;
|
|
|
|
return g4x_check_srwm(dev,
|
|
*display_wm, *cursor_wm,
|
|
display, cursor);
|
|
}
|
|
|
|
static bool vlv_compute_drain_latency(struct drm_device *dev,
|
|
int plane,
|
|
int *plane_prec_mult,
|
|
int *plane_dl,
|
|
int *cursor_prec_mult,
|
|
int *cursor_dl)
|
|
{
|
|
struct drm_crtc *crtc;
|
|
int clock, pixel_size;
|
|
int entries;
|
|
|
|
crtc = intel_get_crtc_for_plane(dev, plane);
|
|
if (!intel_crtc_active(crtc))
|
|
return false;
|
|
|
|
clock = crtc->mode.clock; /* VESA DOT Clock */
|
|
pixel_size = crtc->fb->bits_per_pixel / 8; /* BPP */
|
|
|
|
entries = (clock / 1000) * pixel_size;
|
|
*plane_prec_mult = (entries > 256) ?
|
|
DRAIN_LATENCY_PRECISION_32 : DRAIN_LATENCY_PRECISION_16;
|
|
*plane_dl = (64 * (*plane_prec_mult) * 4) / ((clock / 1000) *
|
|
pixel_size);
|
|
|
|
entries = (clock / 1000) * 4; /* BPP is always 4 for cursor */
|
|
*cursor_prec_mult = (entries > 256) ?
|
|
DRAIN_LATENCY_PRECISION_32 : DRAIN_LATENCY_PRECISION_16;
|
|
*cursor_dl = (64 * (*cursor_prec_mult) * 4) / ((clock / 1000) * 4);
|
|
|
|
return true;
|
|
}
|
|
|
|
/*
|
|
* Update drain latency registers of memory arbiter
|
|
*
|
|
* Valleyview SoC has a new memory arbiter and needs drain latency registers
|
|
* to be programmed. Each plane has a drain latency multiplier and a drain
|
|
* latency value.
|
|
*/
|
|
|
|
static void vlv_update_drain_latency(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
int planea_prec, planea_dl, planeb_prec, planeb_dl;
|
|
int cursora_prec, cursora_dl, cursorb_prec, cursorb_dl;
|
|
int plane_prec_mult, cursor_prec_mult; /* Precision multiplier is
|
|
either 16 or 32 */
|
|
|
|
/* For plane A, Cursor A */
|
|
if (vlv_compute_drain_latency(dev, 0, &plane_prec_mult, &planea_dl,
|
|
&cursor_prec_mult, &cursora_dl)) {
|
|
cursora_prec = (cursor_prec_mult == DRAIN_LATENCY_PRECISION_32) ?
|
|
DDL_CURSORA_PRECISION_32 : DDL_CURSORA_PRECISION_16;
|
|
planea_prec = (plane_prec_mult == DRAIN_LATENCY_PRECISION_32) ?
|
|
DDL_PLANEA_PRECISION_32 : DDL_PLANEA_PRECISION_16;
|
|
|
|
I915_WRITE(VLV_DDL1, cursora_prec |
|
|
(cursora_dl << DDL_CURSORA_SHIFT) |
|
|
planea_prec | planea_dl);
|
|
}
|
|
|
|
/* For plane B, Cursor B */
|
|
if (vlv_compute_drain_latency(dev, 1, &plane_prec_mult, &planeb_dl,
|
|
&cursor_prec_mult, &cursorb_dl)) {
|
|
cursorb_prec = (cursor_prec_mult == DRAIN_LATENCY_PRECISION_32) ?
|
|
DDL_CURSORB_PRECISION_32 : DDL_CURSORB_PRECISION_16;
|
|
planeb_prec = (plane_prec_mult == DRAIN_LATENCY_PRECISION_32) ?
|
|
DDL_PLANEB_PRECISION_32 : DDL_PLANEB_PRECISION_16;
|
|
|
|
I915_WRITE(VLV_DDL2, cursorb_prec |
|
|
(cursorb_dl << DDL_CURSORB_SHIFT) |
|
|
planeb_prec | planeb_dl);
|
|
}
|
|
}
|
|
|
|
#define single_plane_enabled(mask) is_power_of_2(mask)
|
|
|
|
static void valleyview_update_wm(struct drm_device *dev)
|
|
{
|
|
static const int sr_latency_ns = 12000;
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
int planea_wm, planeb_wm, cursora_wm, cursorb_wm;
|
|
int plane_sr, cursor_sr;
|
|
int ignore_plane_sr, ignore_cursor_sr;
|
|
unsigned int enabled = 0;
|
|
|
|
vlv_update_drain_latency(dev);
|
|
|
|
if (g4x_compute_wm0(dev, PIPE_A,
|
|
&valleyview_wm_info, latency_ns,
|
|
&valleyview_cursor_wm_info, latency_ns,
|
|
&planea_wm, &cursora_wm))
|
|
enabled |= 1 << PIPE_A;
|
|
|
|
if (g4x_compute_wm0(dev, PIPE_B,
|
|
&valleyview_wm_info, latency_ns,
|
|
&valleyview_cursor_wm_info, latency_ns,
|
|
&planeb_wm, &cursorb_wm))
|
|
enabled |= 1 << PIPE_B;
|
|
|
|
if (single_plane_enabled(enabled) &&
|
|
g4x_compute_srwm(dev, ffs(enabled) - 1,
|
|
sr_latency_ns,
|
|
&valleyview_wm_info,
|
|
&valleyview_cursor_wm_info,
|
|
&plane_sr, &ignore_cursor_sr) &&
|
|
g4x_compute_srwm(dev, ffs(enabled) - 1,
|
|
2*sr_latency_ns,
|
|
&valleyview_wm_info,
|
|
&valleyview_cursor_wm_info,
|
|
&ignore_plane_sr, &cursor_sr)) {
|
|
I915_WRITE(FW_BLC_SELF_VLV, FW_CSPWRDWNEN);
|
|
} else {
|
|
I915_WRITE(FW_BLC_SELF_VLV,
|
|
I915_READ(FW_BLC_SELF_VLV) & ~FW_CSPWRDWNEN);
|
|
plane_sr = cursor_sr = 0;
|
|
}
|
|
|
|
DRM_DEBUG_KMS("Setting FIFO watermarks - A: plane=%d, cursor=%d, B: plane=%d, cursor=%d, SR: plane=%d, cursor=%d\n",
|
|
planea_wm, cursora_wm,
|
|
planeb_wm, cursorb_wm,
|
|
plane_sr, cursor_sr);
|
|
|
|
I915_WRITE(DSPFW1,
|
|
(plane_sr << DSPFW_SR_SHIFT) |
|
|
(cursorb_wm << DSPFW_CURSORB_SHIFT) |
|
|
(planeb_wm << DSPFW_PLANEB_SHIFT) |
|
|
planea_wm);
|
|
I915_WRITE(DSPFW2,
|
|
(I915_READ(DSPFW2) & ~DSPFW_CURSORA_MASK) |
|
|
(cursora_wm << DSPFW_CURSORA_SHIFT));
|
|
I915_WRITE(DSPFW3,
|
|
(I915_READ(DSPFW3) & ~DSPFW_CURSOR_SR_MASK) |
|
|
(cursor_sr << DSPFW_CURSOR_SR_SHIFT));
|
|
}
|
|
|
|
static void g4x_update_wm(struct drm_device *dev)
|
|
{
|
|
static const int sr_latency_ns = 12000;
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
int planea_wm, planeb_wm, cursora_wm, cursorb_wm;
|
|
int plane_sr, cursor_sr;
|
|
unsigned int enabled = 0;
|
|
|
|
if (g4x_compute_wm0(dev, PIPE_A,
|
|
&g4x_wm_info, latency_ns,
|
|
&g4x_cursor_wm_info, latency_ns,
|
|
&planea_wm, &cursora_wm))
|
|
enabled |= 1 << PIPE_A;
|
|
|
|
if (g4x_compute_wm0(dev, PIPE_B,
|
|
&g4x_wm_info, latency_ns,
|
|
&g4x_cursor_wm_info, latency_ns,
|
|
&planeb_wm, &cursorb_wm))
|
|
enabled |= 1 << PIPE_B;
|
|
|
|
if (single_plane_enabled(enabled) &&
|
|
g4x_compute_srwm(dev, ffs(enabled) - 1,
|
|
sr_latency_ns,
|
|
&g4x_wm_info,
|
|
&g4x_cursor_wm_info,
|
|
&plane_sr, &cursor_sr)) {
|
|
I915_WRITE(FW_BLC_SELF, FW_BLC_SELF_EN);
|
|
} else {
|
|
I915_WRITE(FW_BLC_SELF,
|
|
I915_READ(FW_BLC_SELF) & ~FW_BLC_SELF_EN);
|
|
plane_sr = cursor_sr = 0;
|
|
}
|
|
|
|
DRM_DEBUG_KMS("Setting FIFO watermarks - A: plane=%d, cursor=%d, B: plane=%d, cursor=%d, SR: plane=%d, cursor=%d\n",
|
|
planea_wm, cursora_wm,
|
|
planeb_wm, cursorb_wm,
|
|
plane_sr, cursor_sr);
|
|
|
|
I915_WRITE(DSPFW1,
|
|
(plane_sr << DSPFW_SR_SHIFT) |
|
|
(cursorb_wm << DSPFW_CURSORB_SHIFT) |
|
|
(planeb_wm << DSPFW_PLANEB_SHIFT) |
|
|
planea_wm);
|
|
I915_WRITE(DSPFW2,
|
|
(I915_READ(DSPFW2) & ~DSPFW_CURSORA_MASK) |
|
|
(cursora_wm << DSPFW_CURSORA_SHIFT));
|
|
/* HPLL off in SR has some issues on G4x... disable it */
|
|
I915_WRITE(DSPFW3,
|
|
(I915_READ(DSPFW3) & ~(DSPFW_HPLL_SR_EN | DSPFW_CURSOR_SR_MASK)) |
|
|
(cursor_sr << DSPFW_CURSOR_SR_SHIFT));
|
|
}
|
|
|
|
static void i965_update_wm(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
struct drm_crtc *crtc;
|
|
int srwm = 1;
|
|
int cursor_sr = 16;
|
|
|
|
/* Calc sr entries for one plane configs */
|
|
crtc = single_enabled_crtc(dev);
|
|
if (crtc) {
|
|
/* self-refresh has much higher latency */
|
|
static const int sr_latency_ns = 12000;
|
|
int clock = crtc->mode.clock;
|
|
int htotal = crtc->mode.htotal;
|
|
int hdisplay = crtc->mode.hdisplay;
|
|
int pixel_size = crtc->fb->bits_per_pixel / 8;
|
|
unsigned long line_time_us;
|
|
int entries;
|
|
|
|
line_time_us = ((htotal * 1000) / clock);
|
|
|
|
/* Use ns/us then divide to preserve precision */
|
|
entries = (((sr_latency_ns / line_time_us) + 1000) / 1000) *
|
|
pixel_size * hdisplay;
|
|
entries = DIV_ROUND_UP(entries, I915_FIFO_LINE_SIZE);
|
|
srwm = I965_FIFO_SIZE - entries;
|
|
if (srwm < 0)
|
|
srwm = 1;
|
|
srwm &= 0x1ff;
|
|
DRM_DEBUG_KMS("self-refresh entries: %d, wm: %d\n",
|
|
entries, srwm);
|
|
|
|
entries = (((sr_latency_ns / line_time_us) + 1000) / 1000) *
|
|
pixel_size * 64;
|
|
entries = DIV_ROUND_UP(entries,
|
|
i965_cursor_wm_info.cacheline_size);
|
|
cursor_sr = i965_cursor_wm_info.fifo_size -
|
|
(entries + i965_cursor_wm_info.guard_size);
|
|
|
|
if (cursor_sr > i965_cursor_wm_info.max_wm)
|
|
cursor_sr = i965_cursor_wm_info.max_wm;
|
|
|
|
DRM_DEBUG_KMS("self-refresh watermark: display plane %d "
|
|
"cursor %d\n", srwm, cursor_sr);
|
|
|
|
if (IS_CRESTLINE(dev))
|
|
I915_WRITE(FW_BLC_SELF, FW_BLC_SELF_EN);
|
|
} else {
|
|
/* Turn off self refresh if both pipes are enabled */
|
|
if (IS_CRESTLINE(dev))
|
|
I915_WRITE(FW_BLC_SELF, I915_READ(FW_BLC_SELF)
|
|
& ~FW_BLC_SELF_EN);
|
|
}
|
|
|
|
DRM_DEBUG_KMS("Setting FIFO watermarks - A: 8, B: 8, C: 8, SR %d\n",
|
|
srwm);
|
|
|
|
/* 965 has limitations... */
|
|
I915_WRITE(DSPFW1, (srwm << DSPFW_SR_SHIFT) |
|
|
(8 << 16) | (8 << 8) | (8 << 0));
|
|
I915_WRITE(DSPFW2, (8 << 8) | (8 << 0));
|
|
/* update cursor SR watermark */
|
|
I915_WRITE(DSPFW3, (cursor_sr << DSPFW_CURSOR_SR_SHIFT));
|
|
}
|
|
|
|
static void i9xx_update_wm(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
const struct intel_watermark_params *wm_info;
|
|
uint32_t fwater_lo;
|
|
uint32_t fwater_hi;
|
|
int cwm, srwm = 1;
|
|
int fifo_size;
|
|
int planea_wm, planeb_wm;
|
|
struct drm_crtc *crtc, *enabled = NULL;
|
|
|
|
if (IS_I945GM(dev))
|
|
wm_info = &i945_wm_info;
|
|
else if (!IS_GEN2(dev))
|
|
wm_info = &i915_wm_info;
|
|
else
|
|
wm_info = &i855_wm_info;
|
|
|
|
fifo_size = dev_priv->display.get_fifo_size(dev, 0);
|
|
crtc = intel_get_crtc_for_plane(dev, 0);
|
|
if (intel_crtc_active(crtc)) {
|
|
int cpp = crtc->fb->bits_per_pixel / 8;
|
|
if (IS_GEN2(dev))
|
|
cpp = 4;
|
|
|
|
planea_wm = intel_calculate_wm(crtc->mode.clock,
|
|
wm_info, fifo_size, cpp,
|
|
latency_ns);
|
|
enabled = crtc;
|
|
} else
|
|
planea_wm = fifo_size - wm_info->guard_size;
|
|
|
|
fifo_size = dev_priv->display.get_fifo_size(dev, 1);
|
|
crtc = intel_get_crtc_for_plane(dev, 1);
|
|
if (intel_crtc_active(crtc)) {
|
|
int cpp = crtc->fb->bits_per_pixel / 8;
|
|
if (IS_GEN2(dev))
|
|
cpp = 4;
|
|
|
|
planeb_wm = intel_calculate_wm(crtc->mode.clock,
|
|
wm_info, fifo_size, cpp,
|
|
latency_ns);
|
|
if (enabled == NULL)
|
|
enabled = crtc;
|
|
else
|
|
enabled = NULL;
|
|
} else
|
|
planeb_wm = fifo_size - wm_info->guard_size;
|
|
|
|
DRM_DEBUG_KMS("FIFO watermarks - A: %d, B: %d\n", planea_wm, planeb_wm);
|
|
|
|
/*
|
|
* Overlay gets an aggressive default since video jitter is bad.
|
|
*/
|
|
cwm = 2;
|
|
|
|
/* Play safe and disable self-refresh before adjusting watermarks. */
|
|
if (IS_I945G(dev) || IS_I945GM(dev))
|
|
I915_WRITE(FW_BLC_SELF, FW_BLC_SELF_EN_MASK | 0);
|
|
else if (IS_I915GM(dev))
|
|
I915_WRITE(INSTPM, I915_READ(INSTPM) & ~INSTPM_SELF_EN);
|
|
|
|
/* Calc sr entries for one plane configs */
|
|
if (HAS_FW_BLC(dev) && enabled) {
|
|
/* self-refresh has much higher latency */
|
|
static const int sr_latency_ns = 6000;
|
|
int clock = enabled->mode.clock;
|
|
int htotal = enabled->mode.htotal;
|
|
int hdisplay = enabled->mode.hdisplay;
|
|
int pixel_size = enabled->fb->bits_per_pixel / 8;
|
|
unsigned long line_time_us;
|
|
int entries;
|
|
|
|
line_time_us = (htotal * 1000) / clock;
|
|
|
|
/* Use ns/us then divide to preserve precision */
|
|
entries = (((sr_latency_ns / line_time_us) + 1000) / 1000) *
|
|
pixel_size * hdisplay;
|
|
entries = DIV_ROUND_UP(entries, wm_info->cacheline_size);
|
|
DRM_DEBUG_KMS("self-refresh entries: %d\n", entries);
|
|
srwm = wm_info->fifo_size - entries;
|
|
if (srwm < 0)
|
|
srwm = 1;
|
|
|
|
if (IS_I945G(dev) || IS_I945GM(dev))
|
|
I915_WRITE(FW_BLC_SELF,
|
|
FW_BLC_SELF_FIFO_MASK | (srwm & 0xff));
|
|
else if (IS_I915GM(dev))
|
|
I915_WRITE(FW_BLC_SELF, srwm & 0x3f);
|
|
}
|
|
|
|
DRM_DEBUG_KMS("Setting FIFO watermarks - A: %d, B: %d, C: %d, SR %d\n",
|
|
planea_wm, planeb_wm, cwm, srwm);
|
|
|
|
fwater_lo = ((planeb_wm & 0x3f) << 16) | (planea_wm & 0x3f);
|
|
fwater_hi = (cwm & 0x1f);
|
|
|
|
/* Set request length to 8 cachelines per fetch */
|
|
fwater_lo = fwater_lo | (1 << 24) | (1 << 8);
|
|
fwater_hi = fwater_hi | (1 << 8);
|
|
|
|
I915_WRITE(FW_BLC, fwater_lo);
|
|
I915_WRITE(FW_BLC2, fwater_hi);
|
|
|
|
if (HAS_FW_BLC(dev)) {
|
|
if (enabled) {
|
|
if (IS_I945G(dev) || IS_I945GM(dev))
|
|
I915_WRITE(FW_BLC_SELF,
|
|
FW_BLC_SELF_EN_MASK | FW_BLC_SELF_EN);
|
|
else if (IS_I915GM(dev))
|
|
I915_WRITE(INSTPM, I915_READ(INSTPM) | INSTPM_SELF_EN);
|
|
DRM_DEBUG_KMS("memory self refresh enabled\n");
|
|
} else
|
|
DRM_DEBUG_KMS("memory self refresh disabled\n");
|
|
}
|
|
}
|
|
|
|
static void i830_update_wm(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
struct drm_crtc *crtc;
|
|
uint32_t fwater_lo;
|
|
int planea_wm;
|
|
|
|
crtc = single_enabled_crtc(dev);
|
|
if (crtc == NULL)
|
|
return;
|
|
|
|
planea_wm = intel_calculate_wm(crtc->mode.clock, &i830_wm_info,
|
|
dev_priv->display.get_fifo_size(dev, 0),
|
|
4, latency_ns);
|
|
fwater_lo = I915_READ(FW_BLC) & ~0xfff;
|
|
fwater_lo |= (3<<8) | planea_wm;
|
|
|
|
DRM_DEBUG_KMS("Setting FIFO watermarks - A: %d\n", planea_wm);
|
|
|
|
I915_WRITE(FW_BLC, fwater_lo);
|
|
}
|
|
|
|
#define ILK_LP0_PLANE_LATENCY 700
|
|
#define ILK_LP0_CURSOR_LATENCY 1300
|
|
|
|
/*
|
|
* Check the wm result.
|
|
*
|
|
* If any calculated watermark values is larger than the maximum value that
|
|
* can be programmed into the associated watermark register, that watermark
|
|
* must be disabled.
|
|
*/
|
|
static bool ironlake_check_srwm(struct drm_device *dev, int level,
|
|
int fbc_wm, int display_wm, int cursor_wm,
|
|
const struct intel_watermark_params *display,
|
|
const struct intel_watermark_params *cursor)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
|
|
DRM_DEBUG_KMS("watermark %d: display plane %d, fbc lines %d,"
|
|
" cursor %d\n", level, display_wm, fbc_wm, cursor_wm);
|
|
|
|
if (fbc_wm > SNB_FBC_MAX_SRWM) {
|
|
DRM_DEBUG_KMS("fbc watermark(%d) is too large(%d), disabling wm%d+\n",
|
|
fbc_wm, SNB_FBC_MAX_SRWM, level);
|
|
|
|
/* fbc has it's own way to disable FBC WM */
|
|
I915_WRITE(DISP_ARB_CTL,
|
|
I915_READ(DISP_ARB_CTL) | DISP_FBC_WM_DIS);
|
|
return false;
|
|
} else if (INTEL_INFO(dev)->gen >= 6) {
|
|
/* enable FBC WM (except on ILK, where it must remain off) */
|
|
I915_WRITE(DISP_ARB_CTL,
|
|
I915_READ(DISP_ARB_CTL) & ~DISP_FBC_WM_DIS);
|
|
}
|
|
|
|
if (display_wm > display->max_wm) {
|
|
DRM_DEBUG_KMS("display watermark(%d) is too large(%d), disabling wm%d+\n",
|
|
display_wm, SNB_DISPLAY_MAX_SRWM, level);
|
|
return false;
|
|
}
|
|
|
|
if (cursor_wm > cursor->max_wm) {
|
|
DRM_DEBUG_KMS("cursor watermark(%d) is too large(%d), disabling wm%d+\n",
|
|
cursor_wm, SNB_CURSOR_MAX_SRWM, level);
|
|
return false;
|
|
}
|
|
|
|
if (!(fbc_wm || display_wm || cursor_wm)) {
|
|
DRM_DEBUG_KMS("latency %d is 0, disabling wm%d+\n", level, level);
|
|
return false;
|
|
}
|
|
|
|
return true;
|
|
}
|
|
|
|
/*
|
|
* Compute watermark values of WM[1-3],
|
|
*/
|
|
static bool ironlake_compute_srwm(struct drm_device *dev, int level, int plane,
|
|
int latency_ns,
|
|
const struct intel_watermark_params *display,
|
|
const struct intel_watermark_params *cursor,
|
|
int *fbc_wm, int *display_wm, int *cursor_wm)
|
|
{
|
|
struct drm_crtc *crtc;
|
|
unsigned long line_time_us;
|
|
int hdisplay, htotal, pixel_size, clock;
|
|
int line_count, line_size;
|
|
int small, large;
|
|
int entries;
|
|
|
|
if (!latency_ns) {
|
|
*fbc_wm = *display_wm = *cursor_wm = 0;
|
|
return false;
|
|
}
|
|
|
|
crtc = intel_get_crtc_for_plane(dev, plane);
|
|
hdisplay = crtc->mode.hdisplay;
|
|
htotal = crtc->mode.htotal;
|
|
clock = crtc->mode.clock;
|
|
pixel_size = crtc->fb->bits_per_pixel / 8;
|
|
|
|
line_time_us = (htotal * 1000) / clock;
|
|
line_count = (latency_ns / line_time_us + 1000) / 1000;
|
|
line_size = hdisplay * pixel_size;
|
|
|
|
/* Use the minimum of the small and large buffer method for primary */
|
|
small = ((clock * pixel_size / 1000) * latency_ns) / 1000;
|
|
large = line_count * line_size;
|
|
|
|
entries = DIV_ROUND_UP(min(small, large), display->cacheline_size);
|
|
*display_wm = entries + display->guard_size;
|
|
|
|
/*
|
|
* Spec says:
|
|
* FBC WM = ((Final Primary WM * 64) / number of bytes per line) + 2
|
|
*/
|
|
*fbc_wm = DIV_ROUND_UP(*display_wm * 64, line_size) + 2;
|
|
|
|
/* calculate the self-refresh watermark for display cursor */
|
|
entries = line_count * pixel_size * 64;
|
|
entries = DIV_ROUND_UP(entries, cursor->cacheline_size);
|
|
*cursor_wm = entries + cursor->guard_size;
|
|
|
|
return ironlake_check_srwm(dev, level,
|
|
*fbc_wm, *display_wm, *cursor_wm,
|
|
display, cursor);
|
|
}
|
|
|
|
static void ironlake_update_wm(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
int fbc_wm, plane_wm, cursor_wm;
|
|
unsigned int enabled;
|
|
|
|
enabled = 0;
|
|
if (g4x_compute_wm0(dev, PIPE_A,
|
|
&ironlake_display_wm_info,
|
|
ILK_LP0_PLANE_LATENCY,
|
|
&ironlake_cursor_wm_info,
|
|
ILK_LP0_CURSOR_LATENCY,
|
|
&plane_wm, &cursor_wm)) {
|
|
I915_WRITE(WM0_PIPEA_ILK,
|
|
(plane_wm << WM0_PIPE_PLANE_SHIFT) | cursor_wm);
|
|
DRM_DEBUG_KMS("FIFO watermarks For pipe A -"
|
|
" plane %d, " "cursor: %d\n",
|
|
plane_wm, cursor_wm);
|
|
enabled |= 1 << PIPE_A;
|
|
}
|
|
|
|
if (g4x_compute_wm0(dev, PIPE_B,
|
|
&ironlake_display_wm_info,
|
|
ILK_LP0_PLANE_LATENCY,
|
|
&ironlake_cursor_wm_info,
|
|
ILK_LP0_CURSOR_LATENCY,
|
|
&plane_wm, &cursor_wm)) {
|
|
I915_WRITE(WM0_PIPEB_ILK,
|
|
(plane_wm << WM0_PIPE_PLANE_SHIFT) | cursor_wm);
|
|
DRM_DEBUG_KMS("FIFO watermarks For pipe B -"
|
|
" plane %d, cursor: %d\n",
|
|
plane_wm, cursor_wm);
|
|
enabled |= 1 << PIPE_B;
|
|
}
|
|
|
|
/*
|
|
* Calculate and update the self-refresh watermark only when one
|
|
* display plane is used.
|
|
*/
|
|
I915_WRITE(WM3_LP_ILK, 0);
|
|
I915_WRITE(WM2_LP_ILK, 0);
|
|
I915_WRITE(WM1_LP_ILK, 0);
|
|
|
|
if (!single_plane_enabled(enabled))
|
|
return;
|
|
enabled = ffs(enabled) - 1;
|
|
|
|
/* WM1 */
|
|
if (!ironlake_compute_srwm(dev, 1, enabled,
|
|
ILK_READ_WM1_LATENCY() * 500,
|
|
&ironlake_display_srwm_info,
|
|
&ironlake_cursor_srwm_info,
|
|
&fbc_wm, &plane_wm, &cursor_wm))
|
|
return;
|
|
|
|
I915_WRITE(WM1_LP_ILK,
|
|
WM1_LP_SR_EN |
|
|
(ILK_READ_WM1_LATENCY() << WM1_LP_LATENCY_SHIFT) |
|
|
(fbc_wm << WM1_LP_FBC_SHIFT) |
|
|
(plane_wm << WM1_LP_SR_SHIFT) |
|
|
cursor_wm);
|
|
|
|
/* WM2 */
|
|
if (!ironlake_compute_srwm(dev, 2, enabled,
|
|
ILK_READ_WM2_LATENCY() * 500,
|
|
&ironlake_display_srwm_info,
|
|
&ironlake_cursor_srwm_info,
|
|
&fbc_wm, &plane_wm, &cursor_wm))
|
|
return;
|
|
|
|
I915_WRITE(WM2_LP_ILK,
|
|
WM2_LP_EN |
|
|
(ILK_READ_WM2_LATENCY() << WM1_LP_LATENCY_SHIFT) |
|
|
(fbc_wm << WM1_LP_FBC_SHIFT) |
|
|
(plane_wm << WM1_LP_SR_SHIFT) |
|
|
cursor_wm);
|
|
|
|
/*
|
|
* WM3 is unsupported on ILK, probably because we don't have latency
|
|
* data for that power state
|
|
*/
|
|
}
|
|
|
|
static void sandybridge_update_wm(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
int latency = SNB_READ_WM0_LATENCY() * 100; /* In unit 0.1us */
|
|
u32 val;
|
|
int fbc_wm, plane_wm, cursor_wm;
|
|
unsigned int enabled;
|
|
|
|
enabled = 0;
|
|
if (g4x_compute_wm0(dev, PIPE_A,
|
|
&sandybridge_display_wm_info, latency,
|
|
&sandybridge_cursor_wm_info, latency,
|
|
&plane_wm, &cursor_wm)) {
|
|
val = I915_READ(WM0_PIPEA_ILK);
|
|
val &= ~(WM0_PIPE_PLANE_MASK | WM0_PIPE_CURSOR_MASK);
|
|
I915_WRITE(WM0_PIPEA_ILK, val |
|
|
((plane_wm << WM0_PIPE_PLANE_SHIFT) | cursor_wm));
|
|
DRM_DEBUG_KMS("FIFO watermarks For pipe A -"
|
|
" plane %d, " "cursor: %d\n",
|
|
plane_wm, cursor_wm);
|
|
enabled |= 1 << PIPE_A;
|
|
}
|
|
|
|
if (g4x_compute_wm0(dev, PIPE_B,
|
|
&sandybridge_display_wm_info, latency,
|
|
&sandybridge_cursor_wm_info, latency,
|
|
&plane_wm, &cursor_wm)) {
|
|
val = I915_READ(WM0_PIPEB_ILK);
|
|
val &= ~(WM0_PIPE_PLANE_MASK | WM0_PIPE_CURSOR_MASK);
|
|
I915_WRITE(WM0_PIPEB_ILK, val |
|
|
((plane_wm << WM0_PIPE_PLANE_SHIFT) | cursor_wm));
|
|
DRM_DEBUG_KMS("FIFO watermarks For pipe B -"
|
|
" plane %d, cursor: %d\n",
|
|
plane_wm, cursor_wm);
|
|
enabled |= 1 << PIPE_B;
|
|
}
|
|
|
|
/*
|
|
* Calculate and update the self-refresh watermark only when one
|
|
* display plane is used.
|
|
*
|
|
* SNB support 3 levels of watermark.
|
|
*
|
|
* WM1/WM2/WM2 watermarks have to be enabled in the ascending order,
|
|
* and disabled in the descending order
|
|
*
|
|
*/
|
|
I915_WRITE(WM3_LP_ILK, 0);
|
|
I915_WRITE(WM2_LP_ILK, 0);
|
|
I915_WRITE(WM1_LP_ILK, 0);
|
|
|
|
if (!single_plane_enabled(enabled) ||
|
|
dev_priv->sprite_scaling_enabled)
|
|
return;
|
|
enabled = ffs(enabled) - 1;
|
|
|
|
/* WM1 */
|
|
if (!ironlake_compute_srwm(dev, 1, enabled,
|
|
SNB_READ_WM1_LATENCY() * 500,
|
|
&sandybridge_display_srwm_info,
|
|
&sandybridge_cursor_srwm_info,
|
|
&fbc_wm, &plane_wm, &cursor_wm))
|
|
return;
|
|
|
|
I915_WRITE(WM1_LP_ILK,
|
|
WM1_LP_SR_EN |
|
|
(SNB_READ_WM1_LATENCY() << WM1_LP_LATENCY_SHIFT) |
|
|
(fbc_wm << WM1_LP_FBC_SHIFT) |
|
|
(plane_wm << WM1_LP_SR_SHIFT) |
|
|
cursor_wm);
|
|
|
|
/* WM2 */
|
|
if (!ironlake_compute_srwm(dev, 2, enabled,
|
|
SNB_READ_WM2_LATENCY() * 500,
|
|
&sandybridge_display_srwm_info,
|
|
&sandybridge_cursor_srwm_info,
|
|
&fbc_wm, &plane_wm, &cursor_wm))
|
|
return;
|
|
|
|
I915_WRITE(WM2_LP_ILK,
|
|
WM2_LP_EN |
|
|
(SNB_READ_WM2_LATENCY() << WM1_LP_LATENCY_SHIFT) |
|
|
(fbc_wm << WM1_LP_FBC_SHIFT) |
|
|
(plane_wm << WM1_LP_SR_SHIFT) |
|
|
cursor_wm);
|
|
|
|
/* WM3 */
|
|
if (!ironlake_compute_srwm(dev, 3, enabled,
|
|
SNB_READ_WM3_LATENCY() * 500,
|
|
&sandybridge_display_srwm_info,
|
|
&sandybridge_cursor_srwm_info,
|
|
&fbc_wm, &plane_wm, &cursor_wm))
|
|
return;
|
|
|
|
I915_WRITE(WM3_LP_ILK,
|
|
WM3_LP_EN |
|
|
(SNB_READ_WM3_LATENCY() << WM1_LP_LATENCY_SHIFT) |
|
|
(fbc_wm << WM1_LP_FBC_SHIFT) |
|
|
(plane_wm << WM1_LP_SR_SHIFT) |
|
|
cursor_wm);
|
|
}
|
|
|
|
static void ivybridge_update_wm(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
int latency = SNB_READ_WM0_LATENCY() * 100; /* In unit 0.1us */
|
|
u32 val;
|
|
int fbc_wm, plane_wm, cursor_wm;
|
|
int ignore_fbc_wm, ignore_plane_wm, ignore_cursor_wm;
|
|
unsigned int enabled;
|
|
|
|
enabled = 0;
|
|
if (g4x_compute_wm0(dev, PIPE_A,
|
|
&sandybridge_display_wm_info, latency,
|
|
&sandybridge_cursor_wm_info, latency,
|
|
&plane_wm, &cursor_wm)) {
|
|
val = I915_READ(WM0_PIPEA_ILK);
|
|
val &= ~(WM0_PIPE_PLANE_MASK | WM0_PIPE_CURSOR_MASK);
|
|
I915_WRITE(WM0_PIPEA_ILK, val |
|
|
((plane_wm << WM0_PIPE_PLANE_SHIFT) | cursor_wm));
|
|
DRM_DEBUG_KMS("FIFO watermarks For pipe A -"
|
|
" plane %d, " "cursor: %d\n",
|
|
plane_wm, cursor_wm);
|
|
enabled |= 1 << PIPE_A;
|
|
}
|
|
|
|
if (g4x_compute_wm0(dev, PIPE_B,
|
|
&sandybridge_display_wm_info, latency,
|
|
&sandybridge_cursor_wm_info, latency,
|
|
&plane_wm, &cursor_wm)) {
|
|
val = I915_READ(WM0_PIPEB_ILK);
|
|
val &= ~(WM0_PIPE_PLANE_MASK | WM0_PIPE_CURSOR_MASK);
|
|
I915_WRITE(WM0_PIPEB_ILK, val |
|
|
((plane_wm << WM0_PIPE_PLANE_SHIFT) | cursor_wm));
|
|
DRM_DEBUG_KMS("FIFO watermarks For pipe B -"
|
|
" plane %d, cursor: %d\n",
|
|
plane_wm, cursor_wm);
|
|
enabled |= 1 << PIPE_B;
|
|
}
|
|
|
|
if (g4x_compute_wm0(dev, PIPE_C,
|
|
&sandybridge_display_wm_info, latency,
|
|
&sandybridge_cursor_wm_info, latency,
|
|
&plane_wm, &cursor_wm)) {
|
|
val = I915_READ(WM0_PIPEC_IVB);
|
|
val &= ~(WM0_PIPE_PLANE_MASK | WM0_PIPE_CURSOR_MASK);
|
|
I915_WRITE(WM0_PIPEC_IVB, val |
|
|
((plane_wm << WM0_PIPE_PLANE_SHIFT) | cursor_wm));
|
|
DRM_DEBUG_KMS("FIFO watermarks For pipe C -"
|
|
" plane %d, cursor: %d\n",
|
|
plane_wm, cursor_wm);
|
|
enabled |= 1 << PIPE_C;
|
|
}
|
|
|
|
/*
|
|
* Calculate and update the self-refresh watermark only when one
|
|
* display plane is used.
|
|
*
|
|
* SNB support 3 levels of watermark.
|
|
*
|
|
* WM1/WM2/WM2 watermarks have to be enabled in the ascending order,
|
|
* and disabled in the descending order
|
|
*
|
|
*/
|
|
I915_WRITE(WM3_LP_ILK, 0);
|
|
I915_WRITE(WM2_LP_ILK, 0);
|
|
I915_WRITE(WM1_LP_ILK, 0);
|
|
|
|
if (!single_plane_enabled(enabled) ||
|
|
dev_priv->sprite_scaling_enabled)
|
|
return;
|
|
enabled = ffs(enabled) - 1;
|
|
|
|
/* WM1 */
|
|
if (!ironlake_compute_srwm(dev, 1, enabled,
|
|
SNB_READ_WM1_LATENCY() * 500,
|
|
&sandybridge_display_srwm_info,
|
|
&sandybridge_cursor_srwm_info,
|
|
&fbc_wm, &plane_wm, &cursor_wm))
|
|
return;
|
|
|
|
I915_WRITE(WM1_LP_ILK,
|
|
WM1_LP_SR_EN |
|
|
(SNB_READ_WM1_LATENCY() << WM1_LP_LATENCY_SHIFT) |
|
|
(fbc_wm << WM1_LP_FBC_SHIFT) |
|
|
(plane_wm << WM1_LP_SR_SHIFT) |
|
|
cursor_wm);
|
|
|
|
/* WM2 */
|
|
if (!ironlake_compute_srwm(dev, 2, enabled,
|
|
SNB_READ_WM2_LATENCY() * 500,
|
|
&sandybridge_display_srwm_info,
|
|
&sandybridge_cursor_srwm_info,
|
|
&fbc_wm, &plane_wm, &cursor_wm))
|
|
return;
|
|
|
|
I915_WRITE(WM2_LP_ILK,
|
|
WM2_LP_EN |
|
|
(SNB_READ_WM2_LATENCY() << WM1_LP_LATENCY_SHIFT) |
|
|
(fbc_wm << WM1_LP_FBC_SHIFT) |
|
|
(plane_wm << WM1_LP_SR_SHIFT) |
|
|
cursor_wm);
|
|
|
|
/* WM3, note we have to correct the cursor latency */
|
|
if (!ironlake_compute_srwm(dev, 3, enabled,
|
|
SNB_READ_WM3_LATENCY() * 500,
|
|
&sandybridge_display_srwm_info,
|
|
&sandybridge_cursor_srwm_info,
|
|
&fbc_wm, &plane_wm, &ignore_cursor_wm) ||
|
|
!ironlake_compute_srwm(dev, 3, enabled,
|
|
2 * SNB_READ_WM3_LATENCY() * 500,
|
|
&sandybridge_display_srwm_info,
|
|
&sandybridge_cursor_srwm_info,
|
|
&ignore_fbc_wm, &ignore_plane_wm, &cursor_wm))
|
|
return;
|
|
|
|
I915_WRITE(WM3_LP_ILK,
|
|
WM3_LP_EN |
|
|
(SNB_READ_WM3_LATENCY() << WM1_LP_LATENCY_SHIFT) |
|
|
(fbc_wm << WM1_LP_FBC_SHIFT) |
|
|
(plane_wm << WM1_LP_SR_SHIFT) |
|
|
cursor_wm);
|
|
}
|
|
|
|
static uint32_t hsw_wm_get_pixel_rate(struct drm_device *dev,
|
|
struct drm_crtc *crtc)
|
|
{
|
|
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
|
|
uint32_t pixel_rate, pfit_size;
|
|
|
|
pixel_rate = intel_crtc->config.adjusted_mode.clock;
|
|
|
|
/* We only use IF-ID interlacing. If we ever use PF-ID we'll need to
|
|
* adjust the pixel_rate here. */
|
|
|
|
pfit_size = intel_crtc->config.pch_pfit.size;
|
|
if (pfit_size) {
|
|
uint64_t pipe_w, pipe_h, pfit_w, pfit_h;
|
|
|
|
pipe_w = intel_crtc->config.requested_mode.hdisplay;
|
|
pipe_h = intel_crtc->config.requested_mode.vdisplay;
|
|
pfit_w = (pfit_size >> 16) & 0xFFFF;
|
|
pfit_h = pfit_size & 0xFFFF;
|
|
if (pipe_w < pfit_w)
|
|
pipe_w = pfit_w;
|
|
if (pipe_h < pfit_h)
|
|
pipe_h = pfit_h;
|
|
|
|
pixel_rate = div_u64((uint64_t) pixel_rate * pipe_w * pipe_h,
|
|
pfit_w * pfit_h);
|
|
}
|
|
|
|
return pixel_rate;
|
|
}
|
|
|
|
static uint32_t hsw_wm_method1(uint32_t pixel_rate, uint8_t bytes_per_pixel,
|
|
uint32_t latency)
|
|
{
|
|
uint64_t ret;
|
|
|
|
ret = (uint64_t) pixel_rate * bytes_per_pixel * latency;
|
|
ret = DIV_ROUND_UP_ULL(ret, 64 * 10000) + 2;
|
|
|
|
return ret;
|
|
}
|
|
|
|
static uint32_t hsw_wm_method2(uint32_t pixel_rate, uint32_t pipe_htotal,
|
|
uint32_t horiz_pixels, uint8_t bytes_per_pixel,
|
|
uint32_t latency)
|
|
{
|
|
uint32_t ret;
|
|
|
|
ret = (latency * pixel_rate) / (pipe_htotal * 10000);
|
|
ret = (ret + 1) * horiz_pixels * bytes_per_pixel;
|
|
ret = DIV_ROUND_UP(ret, 64) + 2;
|
|
return ret;
|
|
}
|
|
|
|
static uint32_t hsw_wm_fbc(uint32_t pri_val, uint32_t horiz_pixels,
|
|
uint8_t bytes_per_pixel)
|
|
{
|
|
return DIV_ROUND_UP(pri_val * 64, horiz_pixels * bytes_per_pixel) + 2;
|
|
}
|
|
|
|
struct hsw_pipe_wm_parameters {
|
|
bool active;
|
|
bool sprite_enabled;
|
|
uint8_t pri_bytes_per_pixel;
|
|
uint8_t spr_bytes_per_pixel;
|
|
uint8_t cur_bytes_per_pixel;
|
|
uint32_t pri_horiz_pixels;
|
|
uint32_t spr_horiz_pixels;
|
|
uint32_t cur_horiz_pixels;
|
|
uint32_t pipe_htotal;
|
|
uint32_t pixel_rate;
|
|
};
|
|
|
|
struct hsw_wm_maximums {
|
|
uint16_t pri;
|
|
uint16_t spr;
|
|
uint16_t cur;
|
|
uint16_t fbc;
|
|
};
|
|
|
|
struct hsw_lp_wm_result {
|
|
bool enable;
|
|
bool fbc_enable;
|
|
uint32_t pri_val;
|
|
uint32_t spr_val;
|
|
uint32_t cur_val;
|
|
uint32_t fbc_val;
|
|
};
|
|
|
|
struct hsw_wm_values {
|
|
uint32_t wm_pipe[3];
|
|
uint32_t wm_lp[3];
|
|
uint32_t wm_lp_spr[3];
|
|
uint32_t wm_linetime[3];
|
|
bool enable_fbc_wm;
|
|
};
|
|
|
|
enum hsw_data_buf_partitioning {
|
|
HSW_DATA_BUF_PART_1_2,
|
|
HSW_DATA_BUF_PART_5_6,
|
|
};
|
|
|
|
/* For both WM_PIPE and WM_LP. */
|
|
static uint32_t hsw_compute_pri_wm(struct hsw_pipe_wm_parameters *params,
|
|
uint32_t mem_value,
|
|
bool is_lp)
|
|
{
|
|
uint32_t method1, method2;
|
|
|
|
/* TODO: for now, assume the primary plane is always enabled. */
|
|
if (!params->active)
|
|
return 0;
|
|
|
|
method1 = hsw_wm_method1(params->pixel_rate,
|
|
params->pri_bytes_per_pixel,
|
|
mem_value);
|
|
|
|
if (!is_lp)
|
|
return method1;
|
|
|
|
method2 = hsw_wm_method2(params->pixel_rate,
|
|
params->pipe_htotal,
|
|
params->pri_horiz_pixels,
|
|
params->pri_bytes_per_pixel,
|
|
mem_value);
|
|
|
|
return min(method1, method2);
|
|
}
|
|
|
|
/* For both WM_PIPE and WM_LP. */
|
|
static uint32_t hsw_compute_spr_wm(struct hsw_pipe_wm_parameters *params,
|
|
uint32_t mem_value)
|
|
{
|
|
uint32_t method1, method2;
|
|
|
|
if (!params->active || !params->sprite_enabled)
|
|
return 0;
|
|
|
|
method1 = hsw_wm_method1(params->pixel_rate,
|
|
params->spr_bytes_per_pixel,
|
|
mem_value);
|
|
method2 = hsw_wm_method2(params->pixel_rate,
|
|
params->pipe_htotal,
|
|
params->spr_horiz_pixels,
|
|
params->spr_bytes_per_pixel,
|
|
mem_value);
|
|
return min(method1, method2);
|
|
}
|
|
|
|
/* For both WM_PIPE and WM_LP. */
|
|
static uint32_t hsw_compute_cur_wm(struct hsw_pipe_wm_parameters *params,
|
|
uint32_t mem_value)
|
|
{
|
|
if (!params->active)
|
|
return 0;
|
|
|
|
return hsw_wm_method2(params->pixel_rate,
|
|
params->pipe_htotal,
|
|
params->cur_horiz_pixels,
|
|
params->cur_bytes_per_pixel,
|
|
mem_value);
|
|
}
|
|
|
|
/* Only for WM_LP. */
|
|
static uint32_t hsw_compute_fbc_wm(struct hsw_pipe_wm_parameters *params,
|
|
uint32_t pri_val,
|
|
uint32_t mem_value)
|
|
{
|
|
if (!params->active)
|
|
return 0;
|
|
|
|
return hsw_wm_fbc(pri_val,
|
|
params->pri_horiz_pixels,
|
|
params->pri_bytes_per_pixel);
|
|
}
|
|
|
|
static bool hsw_compute_lp_wm(uint32_t mem_value, struct hsw_wm_maximums *max,
|
|
struct hsw_pipe_wm_parameters *params,
|
|
struct hsw_lp_wm_result *result)
|
|
{
|
|
enum pipe pipe;
|
|
uint32_t pri_val[3], spr_val[3], cur_val[3], fbc_val[3];
|
|
|
|
for (pipe = PIPE_A; pipe <= PIPE_C; pipe++) {
|
|
struct hsw_pipe_wm_parameters *p = ¶ms[pipe];
|
|
|
|
pri_val[pipe] = hsw_compute_pri_wm(p, mem_value, true);
|
|
spr_val[pipe] = hsw_compute_spr_wm(p, mem_value);
|
|
cur_val[pipe] = hsw_compute_cur_wm(p, mem_value);
|
|
fbc_val[pipe] = hsw_compute_fbc_wm(p, pri_val[pipe], mem_value);
|
|
}
|
|
|
|
result->pri_val = max3(pri_val[0], pri_val[1], pri_val[2]);
|
|
result->spr_val = max3(spr_val[0], spr_val[1], spr_val[2]);
|
|
result->cur_val = max3(cur_val[0], cur_val[1], cur_val[2]);
|
|
result->fbc_val = max3(fbc_val[0], fbc_val[1], fbc_val[2]);
|
|
|
|
if (result->fbc_val > max->fbc) {
|
|
result->fbc_enable = false;
|
|
result->fbc_val = 0;
|
|
} else {
|
|
result->fbc_enable = true;
|
|
}
|
|
|
|
result->enable = result->pri_val <= max->pri &&
|
|
result->spr_val <= max->spr &&
|
|
result->cur_val <= max->cur;
|
|
return result->enable;
|
|
}
|
|
|
|
static uint32_t hsw_compute_wm_pipe(struct drm_i915_private *dev_priv,
|
|
uint32_t mem_value, enum pipe pipe,
|
|
struct hsw_pipe_wm_parameters *params)
|
|
{
|
|
uint32_t pri_val, cur_val, spr_val;
|
|
|
|
pri_val = hsw_compute_pri_wm(params, mem_value, false);
|
|
spr_val = hsw_compute_spr_wm(params, mem_value);
|
|
cur_val = hsw_compute_cur_wm(params, mem_value);
|
|
|
|
WARN(pri_val > 127,
|
|
"Primary WM error, mode not supported for pipe %c\n",
|
|
pipe_name(pipe));
|
|
WARN(spr_val > 127,
|
|
"Sprite WM error, mode not supported for pipe %c\n",
|
|
pipe_name(pipe));
|
|
WARN(cur_val > 63,
|
|
"Cursor WM error, mode not supported for pipe %c\n",
|
|
pipe_name(pipe));
|
|
|
|
return (pri_val << WM0_PIPE_PLANE_SHIFT) |
|
|
(spr_val << WM0_PIPE_SPRITE_SHIFT) |
|
|
cur_val;
|
|
}
|
|
|
|
static uint32_t
|
|
hsw_compute_linetime_wm(struct drm_device *dev, struct drm_crtc *crtc)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
|
|
struct drm_display_mode *mode = &intel_crtc->config.adjusted_mode;
|
|
u32 linetime, ips_linetime;
|
|
|
|
if (!intel_crtc_active(crtc))
|
|
return 0;
|
|
|
|
/* The WM are computed with base on how long it takes to fill a single
|
|
* row at the given clock rate, multiplied by 8.
|
|
* */
|
|
linetime = DIV_ROUND_CLOSEST(mode->htotal * 1000 * 8, mode->clock);
|
|
ips_linetime = DIV_ROUND_CLOSEST(mode->htotal * 1000 * 8,
|
|
intel_ddi_get_cdclk_freq(dev_priv));
|
|
|
|
return PIPE_WM_LINETIME_IPS_LINETIME(ips_linetime) |
|
|
PIPE_WM_LINETIME_TIME(linetime);
|
|
}
|
|
|
|
static void hsw_compute_wm_parameters(struct drm_device *dev,
|
|
struct hsw_pipe_wm_parameters *params,
|
|
uint32_t *wm,
|
|
struct hsw_wm_maximums *lp_max_1_2,
|
|
struct hsw_wm_maximums *lp_max_5_6)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
struct drm_crtc *crtc;
|
|
struct drm_plane *plane;
|
|
uint64_t sskpd = I915_READ64(MCH_SSKPD);
|
|
enum pipe pipe;
|
|
int pipes_active = 0, sprites_enabled = 0;
|
|
|
|
if ((sskpd >> 56) & 0xFF)
|
|
wm[0] = (sskpd >> 56) & 0xFF;
|
|
else
|
|
wm[0] = sskpd & 0xF;
|
|
wm[1] = ((sskpd >> 4) & 0xFF) * 5;
|
|
wm[2] = ((sskpd >> 12) & 0xFF) * 5;
|
|
wm[3] = ((sskpd >> 20) & 0x1FF) * 5;
|
|
wm[4] = ((sskpd >> 32) & 0x1FF) * 5;
|
|
|
|
list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
|
|
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
|
|
struct hsw_pipe_wm_parameters *p;
|
|
|
|
pipe = intel_crtc->pipe;
|
|
p = ¶ms[pipe];
|
|
|
|
p->active = intel_crtc_active(crtc);
|
|
if (!p->active)
|
|
continue;
|
|
|
|
pipes_active++;
|
|
|
|
p->pipe_htotal = intel_crtc->config.adjusted_mode.htotal;
|
|
p->pixel_rate = hsw_wm_get_pixel_rate(dev, crtc);
|
|
p->pri_bytes_per_pixel = crtc->fb->bits_per_pixel / 8;
|
|
p->cur_bytes_per_pixel = 4;
|
|
p->pri_horiz_pixels =
|
|
intel_crtc->config.requested_mode.hdisplay;
|
|
p->cur_horiz_pixels = 64;
|
|
}
|
|
|
|
list_for_each_entry(plane, &dev->mode_config.plane_list, head) {
|
|
struct intel_plane *intel_plane = to_intel_plane(plane);
|
|
struct hsw_pipe_wm_parameters *p;
|
|
|
|
pipe = intel_plane->pipe;
|
|
p = ¶ms[pipe];
|
|
|
|
p->sprite_enabled = intel_plane->wm.enable;
|
|
p->spr_bytes_per_pixel = intel_plane->wm.bytes_per_pixel;
|
|
p->spr_horiz_pixels = intel_plane->wm.horiz_pixels;
|
|
|
|
if (p->sprite_enabled)
|
|
sprites_enabled++;
|
|
}
|
|
|
|
if (pipes_active > 1) {
|
|
lp_max_1_2->pri = lp_max_5_6->pri = sprites_enabled ? 128 : 256;
|
|
lp_max_1_2->spr = lp_max_5_6->spr = 128;
|
|
lp_max_1_2->cur = lp_max_5_6->cur = 64;
|
|
} else {
|
|
lp_max_1_2->pri = sprites_enabled ? 384 : 768;
|
|
lp_max_5_6->pri = sprites_enabled ? 128 : 768;
|
|
lp_max_1_2->spr = 384;
|
|
lp_max_5_6->spr = 640;
|
|
lp_max_1_2->cur = lp_max_5_6->cur = 255;
|
|
}
|
|
lp_max_1_2->fbc = lp_max_5_6->fbc = 15;
|
|
}
|
|
|
|
static void hsw_compute_wm_results(struct drm_device *dev,
|
|
struct hsw_pipe_wm_parameters *params,
|
|
uint32_t *wm,
|
|
struct hsw_wm_maximums *lp_maximums,
|
|
struct hsw_wm_values *results)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
struct drm_crtc *crtc;
|
|
struct hsw_lp_wm_result lp_results[4] = {};
|
|
enum pipe pipe;
|
|
int level, max_level, wm_lp;
|
|
|
|
for (level = 1; level <= 4; level++)
|
|
if (!hsw_compute_lp_wm(wm[level], lp_maximums, params,
|
|
&lp_results[level - 1]))
|
|
break;
|
|
max_level = level - 1;
|
|
|
|
/* The spec says it is preferred to disable FBC WMs instead of disabling
|
|
* a WM level. */
|
|
results->enable_fbc_wm = true;
|
|
for (level = 1; level <= max_level; level++) {
|
|
if (!lp_results[level - 1].fbc_enable) {
|
|
results->enable_fbc_wm = false;
|
|
break;
|
|
}
|
|
}
|
|
|
|
memset(results, 0, sizeof(*results));
|
|
for (wm_lp = 1; wm_lp <= 3; wm_lp++) {
|
|
const struct hsw_lp_wm_result *r;
|
|
|
|
level = (max_level == 4 && wm_lp > 1) ? wm_lp + 1 : wm_lp;
|
|
if (level > max_level)
|
|
break;
|
|
|
|
r = &lp_results[level - 1];
|
|
results->wm_lp[wm_lp - 1] = HSW_WM_LP_VAL(level * 2,
|
|
r->fbc_val,
|
|
r->pri_val,
|
|
r->cur_val);
|
|
results->wm_lp_spr[wm_lp - 1] = r->spr_val;
|
|
}
|
|
|
|
for_each_pipe(pipe)
|
|
results->wm_pipe[pipe] = hsw_compute_wm_pipe(dev_priv, wm[0],
|
|
pipe,
|
|
¶ms[pipe]);
|
|
|
|
for_each_pipe(pipe) {
|
|
crtc = dev_priv->pipe_to_crtc_mapping[pipe];
|
|
results->wm_linetime[pipe] = hsw_compute_linetime_wm(dev, crtc);
|
|
}
|
|
}
|
|
|
|
/* Find the result with the highest level enabled. Check for enable_fbc_wm in
|
|
* case both are at the same level. Prefer r1 in case they're the same. */
|
|
struct hsw_wm_values *hsw_find_best_result(struct hsw_wm_values *r1,
|
|
struct hsw_wm_values *r2)
|
|
{
|
|
int i, val_r1 = 0, val_r2 = 0;
|
|
|
|
for (i = 0; i < 3; i++) {
|
|
if (r1->wm_lp[i] & WM3_LP_EN)
|
|
val_r1 = r1->wm_lp[i] & WM1_LP_LATENCY_MASK;
|
|
if (r2->wm_lp[i] & WM3_LP_EN)
|
|
val_r2 = r2->wm_lp[i] & WM1_LP_LATENCY_MASK;
|
|
}
|
|
|
|
if (val_r1 == val_r2) {
|
|
if (r2->enable_fbc_wm && !r1->enable_fbc_wm)
|
|
return r2;
|
|
else
|
|
return r1;
|
|
} else if (val_r1 > val_r2) {
|
|
return r1;
|
|
} else {
|
|
return r2;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* The spec says we shouldn't write when we don't need, because every write
|
|
* causes WMs to be re-evaluated, expending some power.
|
|
*/
|
|
static void hsw_write_wm_values(struct drm_i915_private *dev_priv,
|
|
struct hsw_wm_values *results,
|
|
enum hsw_data_buf_partitioning partitioning)
|
|
{
|
|
struct hsw_wm_values previous;
|
|
uint32_t val;
|
|
enum hsw_data_buf_partitioning prev_partitioning;
|
|
bool prev_enable_fbc_wm;
|
|
|
|
previous.wm_pipe[0] = I915_READ(WM0_PIPEA_ILK);
|
|
previous.wm_pipe[1] = I915_READ(WM0_PIPEB_ILK);
|
|
previous.wm_pipe[2] = I915_READ(WM0_PIPEC_IVB);
|
|
previous.wm_lp[0] = I915_READ(WM1_LP_ILK);
|
|
previous.wm_lp[1] = I915_READ(WM2_LP_ILK);
|
|
previous.wm_lp[2] = I915_READ(WM3_LP_ILK);
|
|
previous.wm_lp_spr[0] = I915_READ(WM1S_LP_ILK);
|
|
previous.wm_lp_spr[1] = I915_READ(WM2S_LP_IVB);
|
|
previous.wm_lp_spr[2] = I915_READ(WM3S_LP_IVB);
|
|
previous.wm_linetime[0] = I915_READ(PIPE_WM_LINETIME(PIPE_A));
|
|
previous.wm_linetime[1] = I915_READ(PIPE_WM_LINETIME(PIPE_B));
|
|
previous.wm_linetime[2] = I915_READ(PIPE_WM_LINETIME(PIPE_C));
|
|
|
|
prev_partitioning = (I915_READ(WM_MISC) & WM_MISC_DATA_PARTITION_5_6) ?
|
|
HSW_DATA_BUF_PART_5_6 : HSW_DATA_BUF_PART_1_2;
|
|
|
|
prev_enable_fbc_wm = !(I915_READ(DISP_ARB_CTL) & DISP_FBC_WM_DIS);
|
|
|
|
if (memcmp(results->wm_pipe, previous.wm_pipe,
|
|
sizeof(results->wm_pipe)) == 0 &&
|
|
memcmp(results->wm_lp, previous.wm_lp,
|
|
sizeof(results->wm_lp)) == 0 &&
|
|
memcmp(results->wm_lp_spr, previous.wm_lp_spr,
|
|
sizeof(results->wm_lp_spr)) == 0 &&
|
|
memcmp(results->wm_linetime, previous.wm_linetime,
|
|
sizeof(results->wm_linetime)) == 0 &&
|
|
partitioning == prev_partitioning &&
|
|
results->enable_fbc_wm == prev_enable_fbc_wm)
|
|
return;
|
|
|
|
if (previous.wm_lp[2] != 0)
|
|
I915_WRITE(WM3_LP_ILK, 0);
|
|
if (previous.wm_lp[1] != 0)
|
|
I915_WRITE(WM2_LP_ILK, 0);
|
|
if (previous.wm_lp[0] != 0)
|
|
I915_WRITE(WM1_LP_ILK, 0);
|
|
|
|
if (previous.wm_pipe[0] != results->wm_pipe[0])
|
|
I915_WRITE(WM0_PIPEA_ILK, results->wm_pipe[0]);
|
|
if (previous.wm_pipe[1] != results->wm_pipe[1])
|
|
I915_WRITE(WM0_PIPEB_ILK, results->wm_pipe[1]);
|
|
if (previous.wm_pipe[2] != results->wm_pipe[2])
|
|
I915_WRITE(WM0_PIPEC_IVB, results->wm_pipe[2]);
|
|
|
|
if (previous.wm_linetime[0] != results->wm_linetime[0])
|
|
I915_WRITE(PIPE_WM_LINETIME(PIPE_A), results->wm_linetime[0]);
|
|
if (previous.wm_linetime[1] != results->wm_linetime[1])
|
|
I915_WRITE(PIPE_WM_LINETIME(PIPE_B), results->wm_linetime[1]);
|
|
if (previous.wm_linetime[2] != results->wm_linetime[2])
|
|
I915_WRITE(PIPE_WM_LINETIME(PIPE_C), results->wm_linetime[2]);
|
|
|
|
if (prev_partitioning != partitioning) {
|
|
val = I915_READ(WM_MISC);
|
|
if (partitioning == HSW_DATA_BUF_PART_1_2)
|
|
val &= ~WM_MISC_DATA_PARTITION_5_6;
|
|
else
|
|
val |= WM_MISC_DATA_PARTITION_5_6;
|
|
I915_WRITE(WM_MISC, val);
|
|
}
|
|
|
|
if (prev_enable_fbc_wm != results->enable_fbc_wm) {
|
|
val = I915_READ(DISP_ARB_CTL);
|
|
if (results->enable_fbc_wm)
|
|
val &= ~DISP_FBC_WM_DIS;
|
|
else
|
|
val |= DISP_FBC_WM_DIS;
|
|
I915_WRITE(DISP_ARB_CTL, val);
|
|
}
|
|
|
|
if (previous.wm_lp_spr[0] != results->wm_lp_spr[0])
|
|
I915_WRITE(WM1S_LP_ILK, results->wm_lp_spr[0]);
|
|
if (previous.wm_lp_spr[1] != results->wm_lp_spr[1])
|
|
I915_WRITE(WM2S_LP_IVB, results->wm_lp_spr[1]);
|
|
if (previous.wm_lp_spr[2] != results->wm_lp_spr[2])
|
|
I915_WRITE(WM3S_LP_IVB, results->wm_lp_spr[2]);
|
|
|
|
if (results->wm_lp[0] != 0)
|
|
I915_WRITE(WM1_LP_ILK, results->wm_lp[0]);
|
|
if (results->wm_lp[1] != 0)
|
|
I915_WRITE(WM2_LP_ILK, results->wm_lp[1]);
|
|
if (results->wm_lp[2] != 0)
|
|
I915_WRITE(WM3_LP_ILK, results->wm_lp[2]);
|
|
}
|
|
|
|
static void haswell_update_wm(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
struct hsw_wm_maximums lp_max_1_2, lp_max_5_6;
|
|
struct hsw_pipe_wm_parameters params[3];
|
|
struct hsw_wm_values results_1_2, results_5_6, *best_results;
|
|
uint32_t wm[5];
|
|
enum hsw_data_buf_partitioning partitioning;
|
|
|
|
hsw_compute_wm_parameters(dev, params, wm, &lp_max_1_2, &lp_max_5_6);
|
|
|
|
hsw_compute_wm_results(dev, params, wm, &lp_max_1_2, &results_1_2);
|
|
if (lp_max_1_2.pri != lp_max_5_6.pri) {
|
|
hsw_compute_wm_results(dev, params, wm, &lp_max_5_6,
|
|
&results_5_6);
|
|
best_results = hsw_find_best_result(&results_1_2, &results_5_6);
|
|
} else {
|
|
best_results = &results_1_2;
|
|
}
|
|
|
|
partitioning = (best_results == &results_1_2) ?
|
|
HSW_DATA_BUF_PART_1_2 : HSW_DATA_BUF_PART_5_6;
|
|
|
|
hsw_write_wm_values(dev_priv, best_results, partitioning);
|
|
}
|
|
|
|
static void haswell_update_sprite_wm(struct drm_device *dev, int pipe,
|
|
uint32_t sprite_width, int pixel_size,
|
|
bool enable)
|
|
{
|
|
struct drm_plane *plane;
|
|
|
|
list_for_each_entry(plane, &dev->mode_config.plane_list, head) {
|
|
struct intel_plane *intel_plane = to_intel_plane(plane);
|
|
|
|
if (intel_plane->pipe == pipe) {
|
|
intel_plane->wm.enable = enable;
|
|
intel_plane->wm.horiz_pixels = sprite_width + 1;
|
|
intel_plane->wm.bytes_per_pixel = pixel_size;
|
|
break;
|
|
}
|
|
}
|
|
|
|
haswell_update_wm(dev);
|
|
}
|
|
|
|
static bool
|
|
sandybridge_compute_sprite_wm(struct drm_device *dev, int plane,
|
|
uint32_t sprite_width, int pixel_size,
|
|
const struct intel_watermark_params *display,
|
|
int display_latency_ns, int *sprite_wm)
|
|
{
|
|
struct drm_crtc *crtc;
|
|
int clock;
|
|
int entries, tlb_miss;
|
|
|
|
crtc = intel_get_crtc_for_plane(dev, plane);
|
|
if (!intel_crtc_active(crtc)) {
|
|
*sprite_wm = display->guard_size;
|
|
return false;
|
|
}
|
|
|
|
clock = crtc->mode.clock;
|
|
|
|
/* Use the small buffer method to calculate the sprite watermark */
|
|
entries = ((clock * pixel_size / 1000) * display_latency_ns) / 1000;
|
|
tlb_miss = display->fifo_size*display->cacheline_size -
|
|
sprite_width * 8;
|
|
if (tlb_miss > 0)
|
|
entries += tlb_miss;
|
|
entries = DIV_ROUND_UP(entries, display->cacheline_size);
|
|
*sprite_wm = entries + display->guard_size;
|
|
if (*sprite_wm > (int)display->max_wm)
|
|
*sprite_wm = display->max_wm;
|
|
|
|
return true;
|
|
}
|
|
|
|
static bool
|
|
sandybridge_compute_sprite_srwm(struct drm_device *dev, int plane,
|
|
uint32_t sprite_width, int pixel_size,
|
|
const struct intel_watermark_params *display,
|
|
int latency_ns, int *sprite_wm)
|
|
{
|
|
struct drm_crtc *crtc;
|
|
unsigned long line_time_us;
|
|
int clock;
|
|
int line_count, line_size;
|
|
int small, large;
|
|
int entries;
|
|
|
|
if (!latency_ns) {
|
|
*sprite_wm = 0;
|
|
return false;
|
|
}
|
|
|
|
crtc = intel_get_crtc_for_plane(dev, plane);
|
|
clock = crtc->mode.clock;
|
|
if (!clock) {
|
|
*sprite_wm = 0;
|
|
return false;
|
|
}
|
|
|
|
line_time_us = (sprite_width * 1000) / clock;
|
|
if (!line_time_us) {
|
|
*sprite_wm = 0;
|
|
return false;
|
|
}
|
|
|
|
line_count = (latency_ns / line_time_us + 1000) / 1000;
|
|
line_size = sprite_width * pixel_size;
|
|
|
|
/* Use the minimum of the small and large buffer method for primary */
|
|
small = ((clock * pixel_size / 1000) * latency_ns) / 1000;
|
|
large = line_count * line_size;
|
|
|
|
entries = DIV_ROUND_UP(min(small, large), display->cacheline_size);
|
|
*sprite_wm = entries + display->guard_size;
|
|
|
|
return *sprite_wm > 0x3ff ? false : true;
|
|
}
|
|
|
|
static void sandybridge_update_sprite_wm(struct drm_device *dev, int pipe,
|
|
uint32_t sprite_width, int pixel_size,
|
|
bool enable)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
int latency = SNB_READ_WM0_LATENCY() * 100; /* In unit 0.1us */
|
|
u32 val;
|
|
int sprite_wm, reg;
|
|
int ret;
|
|
|
|
if (!enable)
|
|
return;
|
|
|
|
switch (pipe) {
|
|
case 0:
|
|
reg = WM0_PIPEA_ILK;
|
|
break;
|
|
case 1:
|
|
reg = WM0_PIPEB_ILK;
|
|
break;
|
|
case 2:
|
|
reg = WM0_PIPEC_IVB;
|
|
break;
|
|
default:
|
|
return; /* bad pipe */
|
|
}
|
|
|
|
ret = sandybridge_compute_sprite_wm(dev, pipe, sprite_width, pixel_size,
|
|
&sandybridge_display_wm_info,
|
|
latency, &sprite_wm);
|
|
if (!ret) {
|
|
DRM_DEBUG_KMS("failed to compute sprite wm for pipe %c\n",
|
|
pipe_name(pipe));
|
|
return;
|
|
}
|
|
|
|
val = I915_READ(reg);
|
|
val &= ~WM0_PIPE_SPRITE_MASK;
|
|
I915_WRITE(reg, val | (sprite_wm << WM0_PIPE_SPRITE_SHIFT));
|
|
DRM_DEBUG_KMS("sprite watermarks For pipe %c - %d\n", pipe_name(pipe), sprite_wm);
|
|
|
|
|
|
ret = sandybridge_compute_sprite_srwm(dev, pipe, sprite_width,
|
|
pixel_size,
|
|
&sandybridge_display_srwm_info,
|
|
SNB_READ_WM1_LATENCY() * 500,
|
|
&sprite_wm);
|
|
if (!ret) {
|
|
DRM_DEBUG_KMS("failed to compute sprite lp1 wm on pipe %c\n",
|
|
pipe_name(pipe));
|
|
return;
|
|
}
|
|
I915_WRITE(WM1S_LP_ILK, sprite_wm);
|
|
|
|
/* Only IVB has two more LP watermarks for sprite */
|
|
if (!IS_IVYBRIDGE(dev))
|
|
return;
|
|
|
|
ret = sandybridge_compute_sprite_srwm(dev, pipe, sprite_width,
|
|
pixel_size,
|
|
&sandybridge_display_srwm_info,
|
|
SNB_READ_WM2_LATENCY() * 500,
|
|
&sprite_wm);
|
|
if (!ret) {
|
|
DRM_DEBUG_KMS("failed to compute sprite lp2 wm on pipe %c\n",
|
|
pipe_name(pipe));
|
|
return;
|
|
}
|
|
I915_WRITE(WM2S_LP_IVB, sprite_wm);
|
|
|
|
ret = sandybridge_compute_sprite_srwm(dev, pipe, sprite_width,
|
|
pixel_size,
|
|
&sandybridge_display_srwm_info,
|
|
SNB_READ_WM3_LATENCY() * 500,
|
|
&sprite_wm);
|
|
if (!ret) {
|
|
DRM_DEBUG_KMS("failed to compute sprite lp3 wm on pipe %c\n",
|
|
pipe_name(pipe));
|
|
return;
|
|
}
|
|
I915_WRITE(WM3S_LP_IVB, sprite_wm);
|
|
}
|
|
|
|
/**
|
|
* intel_update_watermarks - update FIFO watermark values based on current modes
|
|
*
|
|
* Calculate watermark values for the various WM regs based on current mode
|
|
* and plane configuration.
|
|
*
|
|
* There are several cases to deal with here:
|
|
* - normal (i.e. non-self-refresh)
|
|
* - self-refresh (SR) mode
|
|
* - lines are large relative to FIFO size (buffer can hold up to 2)
|
|
* - lines are small relative to FIFO size (buffer can hold more than 2
|
|
* lines), so need to account for TLB latency
|
|
*
|
|
* The normal calculation is:
|
|
* watermark = dotclock * bytes per pixel * latency
|
|
* where latency is platform & configuration dependent (we assume pessimal
|
|
* values here).
|
|
*
|
|
* The SR calculation is:
|
|
* watermark = (trunc(latency/line time)+1) * surface width *
|
|
* bytes per pixel
|
|
* where
|
|
* line time = htotal / dotclock
|
|
* surface width = hdisplay for normal plane and 64 for cursor
|
|
* and latency is assumed to be high, as above.
|
|
*
|
|
* The final value programmed to the register should always be rounded up,
|
|
* and include an extra 2 entries to account for clock crossings.
|
|
*
|
|
* We don't use the sprite, so we can ignore that. And on Crestline we have
|
|
* to set the non-SR watermarks to 8.
|
|
*/
|
|
void intel_update_watermarks(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
|
|
if (dev_priv->display.update_wm)
|
|
dev_priv->display.update_wm(dev);
|
|
}
|
|
|
|
void intel_update_sprite_watermarks(struct drm_device *dev, int pipe,
|
|
uint32_t sprite_width, int pixel_size,
|
|
bool enable)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
|
|
if (dev_priv->display.update_sprite_wm)
|
|
dev_priv->display.update_sprite_wm(dev, pipe, sprite_width,
|
|
pixel_size, enable);
|
|
}
|
|
|
|
static struct drm_i915_gem_object *
|
|
intel_alloc_context_page(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_gem_object *ctx;
|
|
int ret;
|
|
|
|
WARN_ON(!mutex_is_locked(&dev->struct_mutex));
|
|
|
|
ctx = i915_gem_alloc_object(dev, 4096);
|
|
if (!ctx) {
|
|
DRM_DEBUG("failed to alloc power context, RC6 disabled\n");
|
|
return NULL;
|
|
}
|
|
|
|
ret = i915_gem_object_pin(ctx, 4096, true, false);
|
|
if (ret) {
|
|
DRM_ERROR("failed to pin power context: %d\n", ret);
|
|
goto err_unref;
|
|
}
|
|
|
|
ret = i915_gem_object_set_to_gtt_domain(ctx, 1);
|
|
if (ret) {
|
|
DRM_ERROR("failed to set-domain on power context: %d\n", ret);
|
|
goto err_unpin;
|
|
}
|
|
|
|
return ctx;
|
|
|
|
err_unpin:
|
|
i915_gem_object_unpin(ctx);
|
|
err_unref:
|
|
drm_gem_object_unreference(&ctx->base);
|
|
return NULL;
|
|
}
|
|
|
|
/**
|
|
* Lock protecting IPS related data structures
|
|
*/
|
|
DEFINE_SPINLOCK(mchdev_lock);
|
|
|
|
/* Global for IPS driver to get at the current i915 device. Protected by
|
|
* mchdev_lock. */
|
|
static struct drm_i915_private *i915_mch_dev;
|
|
|
|
bool ironlake_set_drps(struct drm_device *dev, u8 val)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
u16 rgvswctl;
|
|
|
|
assert_spin_locked(&mchdev_lock);
|
|
|
|
rgvswctl = I915_READ16(MEMSWCTL);
|
|
if (rgvswctl & MEMCTL_CMD_STS) {
|
|
DRM_DEBUG("gpu busy, RCS change rejected\n");
|
|
return false; /* still busy with another command */
|
|
}
|
|
|
|
rgvswctl = (MEMCTL_CMD_CHFREQ << MEMCTL_CMD_SHIFT) |
|
|
(val << MEMCTL_FREQ_SHIFT) | MEMCTL_SFCAVM;
|
|
I915_WRITE16(MEMSWCTL, rgvswctl);
|
|
POSTING_READ16(MEMSWCTL);
|
|
|
|
rgvswctl |= MEMCTL_CMD_STS;
|
|
I915_WRITE16(MEMSWCTL, rgvswctl);
|
|
|
|
return true;
|
|
}
|
|
|
|
static void ironlake_enable_drps(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
u32 rgvmodectl = I915_READ(MEMMODECTL);
|
|
u8 fmax, fmin, fstart, vstart;
|
|
|
|
spin_lock_irq(&mchdev_lock);
|
|
|
|
/* Enable temp reporting */
|
|
I915_WRITE16(PMMISC, I915_READ(PMMISC) | MCPPCE_EN);
|
|
I915_WRITE16(TSC1, I915_READ(TSC1) | TSE);
|
|
|
|
/* 100ms RC evaluation intervals */
|
|
I915_WRITE(RCUPEI, 100000);
|
|
I915_WRITE(RCDNEI, 100000);
|
|
|
|
/* Set max/min thresholds to 90ms and 80ms respectively */
|
|
I915_WRITE(RCBMAXAVG, 90000);
|
|
I915_WRITE(RCBMINAVG, 80000);
|
|
|
|
I915_WRITE(MEMIHYST, 1);
|
|
|
|
/* Set up min, max, and cur for interrupt handling */
|
|
fmax = (rgvmodectl & MEMMODE_FMAX_MASK) >> MEMMODE_FMAX_SHIFT;
|
|
fmin = (rgvmodectl & MEMMODE_FMIN_MASK);
|
|
fstart = (rgvmodectl & MEMMODE_FSTART_MASK) >>
|
|
MEMMODE_FSTART_SHIFT;
|
|
|
|
vstart = (I915_READ(PXVFREQ_BASE + (fstart * 4)) & PXVFREQ_PX_MASK) >>
|
|
PXVFREQ_PX_SHIFT;
|
|
|
|
dev_priv->ips.fmax = fmax; /* IPS callback will increase this */
|
|
dev_priv->ips.fstart = fstart;
|
|
|
|
dev_priv->ips.max_delay = fstart;
|
|
dev_priv->ips.min_delay = fmin;
|
|
dev_priv->ips.cur_delay = fstart;
|
|
|
|
DRM_DEBUG_DRIVER("fmax: %d, fmin: %d, fstart: %d\n",
|
|
fmax, fmin, fstart);
|
|
|
|
I915_WRITE(MEMINTREN, MEMINT_CX_SUPR_EN | MEMINT_EVAL_CHG_EN);
|
|
|
|
/*
|
|
* Interrupts will be enabled in ironlake_irq_postinstall
|
|
*/
|
|
|
|
I915_WRITE(VIDSTART, vstart);
|
|
POSTING_READ(VIDSTART);
|
|
|
|
rgvmodectl |= MEMMODE_SWMODE_EN;
|
|
I915_WRITE(MEMMODECTL, rgvmodectl);
|
|
|
|
if (wait_for_atomic((I915_READ(MEMSWCTL) & MEMCTL_CMD_STS) == 0, 10))
|
|
DRM_ERROR("stuck trying to change perf mode\n");
|
|
mdelay(1);
|
|
|
|
ironlake_set_drps(dev, fstart);
|
|
|
|
dev_priv->ips.last_count1 = I915_READ(0x112e4) + I915_READ(0x112e8) +
|
|
I915_READ(0x112e0);
|
|
dev_priv->ips.last_time1 = jiffies_to_msecs(jiffies);
|
|
dev_priv->ips.last_count2 = I915_READ(0x112f4);
|
|
getrawmonotonic(&dev_priv->ips.last_time2);
|
|
|
|
spin_unlock_irq(&mchdev_lock);
|
|
}
|
|
|
|
static void ironlake_disable_drps(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
u16 rgvswctl;
|
|
|
|
spin_lock_irq(&mchdev_lock);
|
|
|
|
rgvswctl = I915_READ16(MEMSWCTL);
|
|
|
|
/* Ack interrupts, disable EFC interrupt */
|
|
I915_WRITE(MEMINTREN, I915_READ(MEMINTREN) & ~MEMINT_EVAL_CHG_EN);
|
|
I915_WRITE(MEMINTRSTS, MEMINT_EVAL_CHG);
|
|
I915_WRITE(DEIER, I915_READ(DEIER) & ~DE_PCU_EVENT);
|
|
I915_WRITE(DEIIR, DE_PCU_EVENT);
|
|
I915_WRITE(DEIMR, I915_READ(DEIMR) | DE_PCU_EVENT);
|
|
|
|
/* Go back to the starting frequency */
|
|
ironlake_set_drps(dev, dev_priv->ips.fstart);
|
|
mdelay(1);
|
|
rgvswctl |= MEMCTL_CMD_STS;
|
|
I915_WRITE(MEMSWCTL, rgvswctl);
|
|
mdelay(1);
|
|
|
|
spin_unlock_irq(&mchdev_lock);
|
|
}
|
|
|
|
/* There's a funny hw issue where the hw returns all 0 when reading from
|
|
* GEN6_RP_INTERRUPT_LIMITS. Hence we always need to compute the desired value
|
|
* ourselves, instead of doing a rmw cycle (which might result in us clearing
|
|
* all limits and the gpu stuck at whatever frequency it is at atm).
|
|
*/
|
|
static u32 gen6_rps_limits(struct drm_i915_private *dev_priv, u8 *val)
|
|
{
|
|
u32 limits;
|
|
|
|
limits = 0;
|
|
|
|
if (*val >= dev_priv->rps.max_delay)
|
|
*val = dev_priv->rps.max_delay;
|
|
limits |= dev_priv->rps.max_delay << 24;
|
|
|
|
/* Only set the down limit when we've reached the lowest level to avoid
|
|
* getting more interrupts, otherwise leave this clear. This prevents a
|
|
* race in the hw when coming out of rc6: There's a tiny window where
|
|
* the hw runs at the minimal clock before selecting the desired
|
|
* frequency, if the down threshold expires in that window we will not
|
|
* receive a down interrupt. */
|
|
if (*val <= dev_priv->rps.min_delay) {
|
|
*val = dev_priv->rps.min_delay;
|
|
limits |= dev_priv->rps.min_delay << 16;
|
|
}
|
|
|
|
return limits;
|
|
}
|
|
|
|
void gen6_set_rps(struct drm_device *dev, u8 val)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
u32 limits = gen6_rps_limits(dev_priv, &val);
|
|
|
|
WARN_ON(!mutex_is_locked(&dev_priv->rps.hw_lock));
|
|
WARN_ON(val > dev_priv->rps.max_delay);
|
|
WARN_ON(val < dev_priv->rps.min_delay);
|
|
|
|
if (val == dev_priv->rps.cur_delay)
|
|
return;
|
|
|
|
if (IS_HASWELL(dev))
|
|
I915_WRITE(GEN6_RPNSWREQ,
|
|
HSW_FREQUENCY(val));
|
|
else
|
|
I915_WRITE(GEN6_RPNSWREQ,
|
|
GEN6_FREQUENCY(val) |
|
|
GEN6_OFFSET(0) |
|
|
GEN6_AGGRESSIVE_TURBO);
|
|
|
|
/* Make sure we continue to get interrupts
|
|
* until we hit the minimum or maximum frequencies.
|
|
*/
|
|
I915_WRITE(GEN6_RP_INTERRUPT_LIMITS, limits);
|
|
|
|
POSTING_READ(GEN6_RPNSWREQ);
|
|
|
|
dev_priv->rps.cur_delay = val;
|
|
|
|
trace_intel_gpu_freq_change(val * 50);
|
|
}
|
|
|
|
void valleyview_set_rps(struct drm_device *dev, u8 val)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
unsigned long timeout = jiffies + msecs_to_jiffies(10);
|
|
u32 limits = gen6_rps_limits(dev_priv, &val);
|
|
u32 pval;
|
|
|
|
WARN_ON(!mutex_is_locked(&dev_priv->rps.hw_lock));
|
|
WARN_ON(val > dev_priv->rps.max_delay);
|
|
WARN_ON(val < dev_priv->rps.min_delay);
|
|
|
|
DRM_DEBUG_DRIVER("gpu freq request from %d to %d\n",
|
|
vlv_gpu_freq(dev_priv->mem_freq,
|
|
dev_priv->rps.cur_delay),
|
|
vlv_gpu_freq(dev_priv->mem_freq, val));
|
|
|
|
if (val == dev_priv->rps.cur_delay)
|
|
return;
|
|
|
|
vlv_punit_write(dev_priv, PUNIT_REG_GPU_FREQ_REQ, val);
|
|
|
|
do {
|
|
pval = vlv_punit_read(dev_priv, PUNIT_REG_GPU_FREQ_STS);
|
|
if (time_after(jiffies, timeout)) {
|
|
DRM_DEBUG_DRIVER("timed out waiting for Punit\n");
|
|
break;
|
|
}
|
|
udelay(10);
|
|
} while (pval & 1);
|
|
|
|
pval = vlv_punit_read(dev_priv, PUNIT_REG_GPU_FREQ_STS);
|
|
if ((pval >> 8) != val)
|
|
DRM_DEBUG_DRIVER("punit overrode freq: %d requested, but got %d\n",
|
|
val, pval >> 8);
|
|
|
|
/* Make sure we continue to get interrupts
|
|
* until we hit the minimum or maximum frequencies.
|
|
*/
|
|
I915_WRITE(GEN6_RP_INTERRUPT_LIMITS, limits);
|
|
|
|
dev_priv->rps.cur_delay = pval >> 8;
|
|
|
|
trace_intel_gpu_freq_change(vlv_gpu_freq(dev_priv->mem_freq, val));
|
|
}
|
|
|
|
|
|
static void gen6_disable_rps(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
|
|
I915_WRITE(GEN6_RC_CONTROL, 0);
|
|
I915_WRITE(GEN6_RPNSWREQ, 1 << 31);
|
|
I915_WRITE(GEN6_PMINTRMSK, 0xffffffff);
|
|
I915_WRITE(GEN6_PMIER, I915_READ(GEN6_PMIER) & ~GEN6_PM_RPS_EVENTS);
|
|
/* Complete PM interrupt masking here doesn't race with the rps work
|
|
* item again unmasking PM interrupts because that is using a different
|
|
* register (PMIMR) to mask PM interrupts. The only risk is in leaving
|
|
* stale bits in PMIIR and PMIMR which gen6_enable_rps will clean up. */
|
|
|
|
spin_lock_irq(&dev_priv->rps.lock);
|
|
dev_priv->rps.pm_iir = 0;
|
|
spin_unlock_irq(&dev_priv->rps.lock);
|
|
|
|
I915_WRITE(GEN6_PMIIR, GEN6_PM_RPS_EVENTS);
|
|
}
|
|
|
|
static void valleyview_disable_rps(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
|
|
I915_WRITE(GEN6_RC_CONTROL, 0);
|
|
I915_WRITE(GEN6_PMINTRMSK, 0xffffffff);
|
|
I915_WRITE(GEN6_PMIER, 0);
|
|
/* Complete PM interrupt masking here doesn't race with the rps work
|
|
* item again unmasking PM interrupts because that is using a different
|
|
* register (PMIMR) to mask PM interrupts. The only risk is in leaving
|
|
* stale bits in PMIIR and PMIMR which gen6_enable_rps will clean up. */
|
|
|
|
spin_lock_irq(&dev_priv->rps.lock);
|
|
dev_priv->rps.pm_iir = 0;
|
|
spin_unlock_irq(&dev_priv->rps.lock);
|
|
|
|
I915_WRITE(GEN6_PMIIR, I915_READ(GEN6_PMIIR));
|
|
|
|
if (dev_priv->vlv_pctx) {
|
|
drm_gem_object_unreference(&dev_priv->vlv_pctx->base);
|
|
dev_priv->vlv_pctx = NULL;
|
|
}
|
|
}
|
|
|
|
int intel_enable_rc6(const struct drm_device *dev)
|
|
{
|
|
/* Respect the kernel parameter if it is set */
|
|
if (i915_enable_rc6 >= 0)
|
|
return i915_enable_rc6;
|
|
|
|
/* Disable RC6 on Ironlake */
|
|
if (INTEL_INFO(dev)->gen == 5)
|
|
return 0;
|
|
|
|
if (IS_HASWELL(dev)) {
|
|
DRM_DEBUG_DRIVER("Haswell: only RC6 available\n");
|
|
return INTEL_RC6_ENABLE;
|
|
}
|
|
|
|
/* snb/ivb have more than one rc6 state. */
|
|
if (INTEL_INFO(dev)->gen == 6) {
|
|
DRM_DEBUG_DRIVER("Sandybridge: deep RC6 disabled\n");
|
|
return INTEL_RC6_ENABLE;
|
|
}
|
|
|
|
DRM_DEBUG_DRIVER("RC6 and deep RC6 enabled\n");
|
|
return (INTEL_RC6_ENABLE | INTEL_RC6p_ENABLE);
|
|
}
|
|
|
|
static void gen6_enable_rps(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
struct intel_ring_buffer *ring;
|
|
u32 rp_state_cap;
|
|
u32 gt_perf_status;
|
|
u32 rc6vids, pcu_mbox, rc6_mask = 0;
|
|
u32 gtfifodbg;
|
|
int rc6_mode;
|
|
int i, ret;
|
|
|
|
WARN_ON(!mutex_is_locked(&dev_priv->rps.hw_lock));
|
|
|
|
/* Here begins a magic sequence of register writes to enable
|
|
* auto-downclocking.
|
|
*
|
|
* Perhaps there might be some value in exposing these to
|
|
* userspace...
|
|
*/
|
|
I915_WRITE(GEN6_RC_STATE, 0);
|
|
|
|
/* Clear the DBG now so we don't confuse earlier errors */
|
|
if ((gtfifodbg = I915_READ(GTFIFODBG))) {
|
|
DRM_ERROR("GT fifo had a previous error %x\n", gtfifodbg);
|
|
I915_WRITE(GTFIFODBG, gtfifodbg);
|
|
}
|
|
|
|
gen6_gt_force_wake_get(dev_priv);
|
|
|
|
rp_state_cap = I915_READ(GEN6_RP_STATE_CAP);
|
|
gt_perf_status = I915_READ(GEN6_GT_PERF_STATUS);
|
|
|
|
/* In units of 50MHz */
|
|
dev_priv->rps.hw_max = dev_priv->rps.max_delay = rp_state_cap & 0xff;
|
|
dev_priv->rps.min_delay = (rp_state_cap & 0xff0000) >> 16;
|
|
dev_priv->rps.cur_delay = 0;
|
|
|
|
/* disable the counters and set deterministic thresholds */
|
|
I915_WRITE(GEN6_RC_CONTROL, 0);
|
|
|
|
I915_WRITE(GEN6_RC1_WAKE_RATE_LIMIT, 1000 << 16);
|
|
I915_WRITE(GEN6_RC6_WAKE_RATE_LIMIT, 40 << 16 | 30);
|
|
I915_WRITE(GEN6_RC6pp_WAKE_RATE_LIMIT, 30);
|
|
I915_WRITE(GEN6_RC_EVALUATION_INTERVAL, 125000);
|
|
I915_WRITE(GEN6_RC_IDLE_HYSTERSIS, 25);
|
|
|
|
for_each_ring(ring, dev_priv, i)
|
|
I915_WRITE(RING_MAX_IDLE(ring->mmio_base), 10);
|
|
|
|
I915_WRITE(GEN6_RC_SLEEP, 0);
|
|
I915_WRITE(GEN6_RC1e_THRESHOLD, 1000);
|
|
I915_WRITE(GEN6_RC6_THRESHOLD, 50000);
|
|
I915_WRITE(GEN6_RC6p_THRESHOLD, 150000);
|
|
I915_WRITE(GEN6_RC6pp_THRESHOLD, 64000); /* unused */
|
|
|
|
/* Check if we are enabling RC6 */
|
|
rc6_mode = intel_enable_rc6(dev_priv->dev);
|
|
if (rc6_mode & INTEL_RC6_ENABLE)
|
|
rc6_mask |= GEN6_RC_CTL_RC6_ENABLE;
|
|
|
|
/* We don't use those on Haswell */
|
|
if (!IS_HASWELL(dev)) {
|
|
if (rc6_mode & INTEL_RC6p_ENABLE)
|
|
rc6_mask |= GEN6_RC_CTL_RC6p_ENABLE;
|
|
|
|
if (rc6_mode & INTEL_RC6pp_ENABLE)
|
|
rc6_mask |= GEN6_RC_CTL_RC6pp_ENABLE;
|
|
}
|
|
|
|
DRM_INFO("Enabling RC6 states: RC6 %s, RC6p %s, RC6pp %s\n",
|
|
(rc6_mask & GEN6_RC_CTL_RC6_ENABLE) ? "on" : "off",
|
|
(rc6_mask & GEN6_RC_CTL_RC6p_ENABLE) ? "on" : "off",
|
|
(rc6_mask & GEN6_RC_CTL_RC6pp_ENABLE) ? "on" : "off");
|
|
|
|
I915_WRITE(GEN6_RC_CONTROL,
|
|
rc6_mask |
|
|
GEN6_RC_CTL_EI_MODE(1) |
|
|
GEN6_RC_CTL_HW_ENABLE);
|
|
|
|
if (IS_HASWELL(dev)) {
|
|
I915_WRITE(GEN6_RPNSWREQ,
|
|
HSW_FREQUENCY(10));
|
|
I915_WRITE(GEN6_RC_VIDEO_FREQ,
|
|
HSW_FREQUENCY(12));
|
|
} else {
|
|
I915_WRITE(GEN6_RPNSWREQ,
|
|
GEN6_FREQUENCY(10) |
|
|
GEN6_OFFSET(0) |
|
|
GEN6_AGGRESSIVE_TURBO);
|
|
I915_WRITE(GEN6_RC_VIDEO_FREQ,
|
|
GEN6_FREQUENCY(12));
|
|
}
|
|
|
|
I915_WRITE(GEN6_RP_DOWN_TIMEOUT, 1000000);
|
|
I915_WRITE(GEN6_RP_INTERRUPT_LIMITS,
|
|
dev_priv->rps.max_delay << 24 |
|
|
dev_priv->rps.min_delay << 16);
|
|
|
|
I915_WRITE(GEN6_RP_UP_THRESHOLD, 59400);
|
|
I915_WRITE(GEN6_RP_DOWN_THRESHOLD, 245000);
|
|
I915_WRITE(GEN6_RP_UP_EI, 66000);
|
|
I915_WRITE(GEN6_RP_DOWN_EI, 350000);
|
|
|
|
I915_WRITE(GEN6_RP_IDLE_HYSTERSIS, 10);
|
|
I915_WRITE(GEN6_RP_CONTROL,
|
|
GEN6_RP_MEDIA_TURBO |
|
|
GEN6_RP_MEDIA_HW_NORMAL_MODE |
|
|
GEN6_RP_MEDIA_IS_GFX |
|
|
GEN6_RP_ENABLE |
|
|
GEN6_RP_UP_BUSY_AVG |
|
|
(IS_HASWELL(dev) ? GEN7_RP_DOWN_IDLE_AVG : GEN6_RP_DOWN_IDLE_CONT));
|
|
|
|
ret = sandybridge_pcode_write(dev_priv, GEN6_PCODE_WRITE_MIN_FREQ_TABLE, 0);
|
|
if (!ret) {
|
|
pcu_mbox = 0;
|
|
ret = sandybridge_pcode_read(dev_priv, GEN6_READ_OC_PARAMS, &pcu_mbox);
|
|
if (!ret && (pcu_mbox & (1<<31))) { /* OC supported */
|
|
DRM_DEBUG_DRIVER("Overclocking supported. Max: %dMHz, Overclock max: %dMHz\n",
|
|
(dev_priv->rps.max_delay & 0xff) * 50,
|
|
(pcu_mbox & 0xff) * 50);
|
|
dev_priv->rps.hw_max = pcu_mbox & 0xff;
|
|
}
|
|
} else {
|
|
DRM_DEBUG_DRIVER("Failed to set the min frequency\n");
|
|
}
|
|
|
|
gen6_set_rps(dev_priv->dev, (gt_perf_status & 0xff00) >> 8);
|
|
|
|
/* requires MSI enabled */
|
|
I915_WRITE(GEN6_PMIER, I915_READ(GEN6_PMIER) | GEN6_PM_RPS_EVENTS);
|
|
spin_lock_irq(&dev_priv->rps.lock);
|
|
/* FIXME: Our interrupt enabling sequence is bonghits.
|
|
* dev_priv->rps.pm_iir really should be 0 here. */
|
|
dev_priv->rps.pm_iir = 0;
|
|
I915_WRITE(GEN6_PMIMR, I915_READ(GEN6_PMIMR) & ~GEN6_PM_RPS_EVENTS);
|
|
I915_WRITE(GEN6_PMIIR, GEN6_PM_RPS_EVENTS);
|
|
spin_unlock_irq(&dev_priv->rps.lock);
|
|
/* unmask all PM interrupts */
|
|
I915_WRITE(GEN6_PMINTRMSK, 0);
|
|
|
|
rc6vids = 0;
|
|
ret = sandybridge_pcode_read(dev_priv, GEN6_PCODE_READ_RC6VIDS, &rc6vids);
|
|
if (IS_GEN6(dev) && ret) {
|
|
DRM_DEBUG_DRIVER("Couldn't check for BIOS workaround\n");
|
|
} else if (IS_GEN6(dev) && (GEN6_DECODE_RC6_VID(rc6vids & 0xff) < 450)) {
|
|
DRM_DEBUG_DRIVER("You should update your BIOS. Correcting minimum rc6 voltage (%dmV->%dmV)\n",
|
|
GEN6_DECODE_RC6_VID(rc6vids & 0xff), 450);
|
|
rc6vids &= 0xffff00;
|
|
rc6vids |= GEN6_ENCODE_RC6_VID(450);
|
|
ret = sandybridge_pcode_write(dev_priv, GEN6_PCODE_WRITE_RC6VIDS, rc6vids);
|
|
if (ret)
|
|
DRM_ERROR("Couldn't fix incorrect rc6 voltage\n");
|
|
}
|
|
|
|
gen6_gt_force_wake_put(dev_priv);
|
|
}
|
|
|
|
static void gen6_update_ring_freq(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
int min_freq = 15;
|
|
unsigned int gpu_freq;
|
|
unsigned int max_ia_freq, min_ring_freq;
|
|
int scaling_factor = 180;
|
|
|
|
WARN_ON(!mutex_is_locked(&dev_priv->rps.hw_lock));
|
|
|
|
max_ia_freq = cpufreq_quick_get_max(0);
|
|
/*
|
|
* Default to measured freq if none found, PCU will ensure we don't go
|
|
* over
|
|
*/
|
|
if (!max_ia_freq)
|
|
max_ia_freq = tsc_khz;
|
|
|
|
/* Convert from kHz to MHz */
|
|
max_ia_freq /= 1000;
|
|
|
|
min_ring_freq = I915_READ(MCHBAR_MIRROR_BASE_SNB + DCLK);
|
|
/* convert DDR frequency from units of 133.3MHz to bandwidth */
|
|
min_ring_freq = (2 * 4 * min_ring_freq + 2) / 3;
|
|
|
|
/*
|
|
* For each potential GPU frequency, load a ring frequency we'd like
|
|
* to use for memory access. We do this by specifying the IA frequency
|
|
* the PCU should use as a reference to determine the ring frequency.
|
|
*/
|
|
for (gpu_freq = dev_priv->rps.max_delay; gpu_freq >= dev_priv->rps.min_delay;
|
|
gpu_freq--) {
|
|
int diff = dev_priv->rps.max_delay - gpu_freq;
|
|
unsigned int ia_freq = 0, ring_freq = 0;
|
|
|
|
if (IS_HASWELL(dev)) {
|
|
ring_freq = (gpu_freq * 5 + 3) / 4;
|
|
ring_freq = max(min_ring_freq, ring_freq);
|
|
/* leave ia_freq as the default, chosen by cpufreq */
|
|
} else {
|
|
/* On older processors, there is no separate ring
|
|
* clock domain, so in order to boost the bandwidth
|
|
* of the ring, we need to upclock the CPU (ia_freq).
|
|
*
|
|
* For GPU frequencies less than 750MHz,
|
|
* just use the lowest ring freq.
|
|
*/
|
|
if (gpu_freq < min_freq)
|
|
ia_freq = 800;
|
|
else
|
|
ia_freq = max_ia_freq - ((diff * scaling_factor) / 2);
|
|
ia_freq = DIV_ROUND_CLOSEST(ia_freq, 100);
|
|
}
|
|
|
|
sandybridge_pcode_write(dev_priv,
|
|
GEN6_PCODE_WRITE_MIN_FREQ_TABLE,
|
|
ia_freq << GEN6_PCODE_FREQ_IA_RATIO_SHIFT |
|
|
ring_freq << GEN6_PCODE_FREQ_RING_RATIO_SHIFT |
|
|
gpu_freq);
|
|
}
|
|
}
|
|
|
|
int valleyview_rps_max_freq(struct drm_i915_private *dev_priv)
|
|
{
|
|
u32 val, rp0;
|
|
|
|
val = vlv_nc_read(dev_priv, IOSF_NC_FB_GFX_FREQ_FUSE);
|
|
|
|
rp0 = (val & FB_GFX_MAX_FREQ_FUSE_MASK) >> FB_GFX_MAX_FREQ_FUSE_SHIFT;
|
|
/* Clamp to max */
|
|
rp0 = min_t(u32, rp0, 0xea);
|
|
|
|
return rp0;
|
|
}
|
|
|
|
static int valleyview_rps_rpe_freq(struct drm_i915_private *dev_priv)
|
|
{
|
|
u32 val, rpe;
|
|
|
|
val = vlv_nc_read(dev_priv, IOSF_NC_FB_GFX_FMAX_FUSE_LO);
|
|
rpe = (val & FB_FMAX_VMIN_FREQ_LO_MASK) >> FB_FMAX_VMIN_FREQ_LO_SHIFT;
|
|
val = vlv_nc_read(dev_priv, IOSF_NC_FB_GFX_FMAX_FUSE_HI);
|
|
rpe |= (val & FB_FMAX_VMIN_FREQ_HI_MASK) << 5;
|
|
|
|
return rpe;
|
|
}
|
|
|
|
int valleyview_rps_min_freq(struct drm_i915_private *dev_priv)
|
|
{
|
|
return vlv_punit_read(dev_priv, PUNIT_REG_GPU_LFM) & 0xff;
|
|
}
|
|
|
|
static void vlv_rps_timer_work(struct work_struct *work)
|
|
{
|
|
drm_i915_private_t *dev_priv = container_of(work, drm_i915_private_t,
|
|
rps.vlv_work.work);
|
|
|
|
/*
|
|
* Timer fired, we must be idle. Drop to min voltage state.
|
|
* Note: we use RPe here since it should match the
|
|
* Vmin we were shooting for. That should give us better
|
|
* perf when we come back out of RC6 than if we used the
|
|
* min freq available.
|
|
*/
|
|
mutex_lock(&dev_priv->rps.hw_lock);
|
|
valleyview_set_rps(dev_priv->dev, dev_priv->rps.rpe_delay);
|
|
mutex_unlock(&dev_priv->rps.hw_lock);
|
|
}
|
|
|
|
static void valleyview_setup_pctx(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
struct drm_i915_gem_object *pctx;
|
|
unsigned long pctx_paddr;
|
|
u32 pcbr;
|
|
int pctx_size = 24*1024;
|
|
|
|
pcbr = I915_READ(VLV_PCBR);
|
|
if (pcbr) {
|
|
/* BIOS set it up already, grab the pre-alloc'd space */
|
|
int pcbr_offset;
|
|
|
|
pcbr_offset = (pcbr & (~4095)) - dev_priv->mm.stolen_base;
|
|
pctx = i915_gem_object_create_stolen_for_preallocated(dev_priv->dev,
|
|
pcbr_offset,
|
|
-1,
|
|
pctx_size);
|
|
goto out;
|
|
}
|
|
|
|
/*
|
|
* From the Gunit register HAS:
|
|
* The Gfx driver is expected to program this register and ensure
|
|
* proper allocation within Gfx stolen memory. For example, this
|
|
* register should be programmed such than the PCBR range does not
|
|
* overlap with other ranges, such as the frame buffer, protected
|
|
* memory, or any other relevant ranges.
|
|
*/
|
|
pctx = i915_gem_object_create_stolen(dev, pctx_size);
|
|
if (!pctx) {
|
|
DRM_DEBUG("not enough stolen space for PCTX, disabling\n");
|
|
return;
|
|
}
|
|
|
|
pctx_paddr = dev_priv->mm.stolen_base + pctx->stolen->start;
|
|
I915_WRITE(VLV_PCBR, pctx_paddr);
|
|
|
|
out:
|
|
dev_priv->vlv_pctx = pctx;
|
|
}
|
|
|
|
static void valleyview_enable_rps(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
struct intel_ring_buffer *ring;
|
|
u32 gtfifodbg, val, rpe;
|
|
int i;
|
|
|
|
WARN_ON(!mutex_is_locked(&dev_priv->rps.hw_lock));
|
|
|
|
if ((gtfifodbg = I915_READ(GTFIFODBG))) {
|
|
DRM_ERROR("GT fifo had a previous error %x\n", gtfifodbg);
|
|
I915_WRITE(GTFIFODBG, gtfifodbg);
|
|
}
|
|
|
|
valleyview_setup_pctx(dev);
|
|
|
|
gen6_gt_force_wake_get(dev_priv);
|
|
|
|
I915_WRITE(GEN6_RP_UP_THRESHOLD, 59400);
|
|
I915_WRITE(GEN6_RP_DOWN_THRESHOLD, 245000);
|
|
I915_WRITE(GEN6_RP_UP_EI, 66000);
|
|
I915_WRITE(GEN6_RP_DOWN_EI, 350000);
|
|
|
|
I915_WRITE(GEN6_RP_IDLE_HYSTERSIS, 10);
|
|
|
|
I915_WRITE(GEN6_RP_CONTROL,
|
|
GEN6_RP_MEDIA_TURBO |
|
|
GEN6_RP_MEDIA_HW_NORMAL_MODE |
|
|
GEN6_RP_MEDIA_IS_GFX |
|
|
GEN6_RP_ENABLE |
|
|
GEN6_RP_UP_BUSY_AVG |
|
|
GEN6_RP_DOWN_IDLE_CONT);
|
|
|
|
I915_WRITE(GEN6_RC6_WAKE_RATE_LIMIT, 0x00280000);
|
|
I915_WRITE(GEN6_RC_EVALUATION_INTERVAL, 125000);
|
|
I915_WRITE(GEN6_RC_IDLE_HYSTERSIS, 25);
|
|
|
|
for_each_ring(ring, dev_priv, i)
|
|
I915_WRITE(RING_MAX_IDLE(ring->mmio_base), 10);
|
|
|
|
I915_WRITE(GEN6_RC6_THRESHOLD, 0xc350);
|
|
|
|
/* allows RC6 residency counter to work */
|
|
I915_WRITE(0x138104, _MASKED_BIT_ENABLE(0x3));
|
|
I915_WRITE(GEN6_RC_CONTROL,
|
|
GEN7_RC_CTL_TO_MODE);
|
|
|
|
val = vlv_punit_read(dev_priv, PUNIT_REG_GPU_FREQ_STS);
|
|
switch ((val >> 6) & 3) {
|
|
case 0:
|
|
case 1:
|
|
dev_priv->mem_freq = 800;
|
|
break;
|
|
case 2:
|
|
dev_priv->mem_freq = 1066;
|
|
break;
|
|
case 3:
|
|
dev_priv->mem_freq = 1333;
|
|
break;
|
|
}
|
|
DRM_DEBUG_DRIVER("DDR speed: %d MHz", dev_priv->mem_freq);
|
|
|
|
DRM_DEBUG_DRIVER("GPLL enabled? %s\n", val & 0x10 ? "yes" : "no");
|
|
DRM_DEBUG_DRIVER("GPU status: 0x%08x\n", val);
|
|
|
|
DRM_DEBUG_DRIVER("current GPU freq: %d\n",
|
|
vlv_gpu_freq(dev_priv->mem_freq, (val >> 8) & 0xff));
|
|
dev_priv->rps.cur_delay = (val >> 8) & 0xff;
|
|
|
|
dev_priv->rps.max_delay = valleyview_rps_max_freq(dev_priv);
|
|
dev_priv->rps.hw_max = dev_priv->rps.max_delay;
|
|
DRM_DEBUG_DRIVER("max GPU freq: %d\n", vlv_gpu_freq(dev_priv->mem_freq,
|
|
dev_priv->rps.max_delay));
|
|
|
|
rpe = valleyview_rps_rpe_freq(dev_priv);
|
|
DRM_DEBUG_DRIVER("RPe GPU freq: %d\n",
|
|
vlv_gpu_freq(dev_priv->mem_freq, rpe));
|
|
dev_priv->rps.rpe_delay = rpe;
|
|
|
|
val = valleyview_rps_min_freq(dev_priv);
|
|
DRM_DEBUG_DRIVER("min GPU freq: %d\n", vlv_gpu_freq(dev_priv->mem_freq,
|
|
val));
|
|
dev_priv->rps.min_delay = val;
|
|
|
|
DRM_DEBUG_DRIVER("setting GPU freq to %d\n",
|
|
vlv_gpu_freq(dev_priv->mem_freq, rpe));
|
|
|
|
INIT_DELAYED_WORK(&dev_priv->rps.vlv_work, vlv_rps_timer_work);
|
|
|
|
valleyview_set_rps(dev_priv->dev, rpe);
|
|
|
|
/* requires MSI enabled */
|
|
I915_WRITE(GEN6_PMIER, GEN6_PM_RPS_EVENTS);
|
|
spin_lock_irq(&dev_priv->rps.lock);
|
|
WARN_ON(dev_priv->rps.pm_iir != 0);
|
|
I915_WRITE(GEN6_PMIMR, 0);
|
|
spin_unlock_irq(&dev_priv->rps.lock);
|
|
/* enable all PM interrupts */
|
|
I915_WRITE(GEN6_PMINTRMSK, 0);
|
|
|
|
gen6_gt_force_wake_put(dev_priv);
|
|
}
|
|
|
|
void ironlake_teardown_rc6(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
|
|
if (dev_priv->ips.renderctx) {
|
|
i915_gem_object_unpin(dev_priv->ips.renderctx);
|
|
drm_gem_object_unreference(&dev_priv->ips.renderctx->base);
|
|
dev_priv->ips.renderctx = NULL;
|
|
}
|
|
|
|
if (dev_priv->ips.pwrctx) {
|
|
i915_gem_object_unpin(dev_priv->ips.pwrctx);
|
|
drm_gem_object_unreference(&dev_priv->ips.pwrctx->base);
|
|
dev_priv->ips.pwrctx = NULL;
|
|
}
|
|
}
|
|
|
|
static void ironlake_disable_rc6(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
|
|
if (I915_READ(PWRCTXA)) {
|
|
/* Wake the GPU, prevent RC6, then restore RSTDBYCTL */
|
|
I915_WRITE(RSTDBYCTL, I915_READ(RSTDBYCTL) | RCX_SW_EXIT);
|
|
wait_for(((I915_READ(RSTDBYCTL) & RSX_STATUS_MASK) == RSX_STATUS_ON),
|
|
50);
|
|
|
|
I915_WRITE(PWRCTXA, 0);
|
|
POSTING_READ(PWRCTXA);
|
|
|
|
I915_WRITE(RSTDBYCTL, I915_READ(RSTDBYCTL) & ~RCX_SW_EXIT);
|
|
POSTING_READ(RSTDBYCTL);
|
|
}
|
|
}
|
|
|
|
static int ironlake_setup_rc6(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
|
|
if (dev_priv->ips.renderctx == NULL)
|
|
dev_priv->ips.renderctx = intel_alloc_context_page(dev);
|
|
if (!dev_priv->ips.renderctx)
|
|
return -ENOMEM;
|
|
|
|
if (dev_priv->ips.pwrctx == NULL)
|
|
dev_priv->ips.pwrctx = intel_alloc_context_page(dev);
|
|
if (!dev_priv->ips.pwrctx) {
|
|
ironlake_teardown_rc6(dev);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void ironlake_enable_rc6(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
struct intel_ring_buffer *ring = &dev_priv->ring[RCS];
|
|
bool was_interruptible;
|
|
int ret;
|
|
|
|
/* rc6 disabled by default due to repeated reports of hanging during
|
|
* boot and resume.
|
|
*/
|
|
if (!intel_enable_rc6(dev))
|
|
return;
|
|
|
|
WARN_ON(!mutex_is_locked(&dev->struct_mutex));
|
|
|
|
ret = ironlake_setup_rc6(dev);
|
|
if (ret)
|
|
return;
|
|
|
|
was_interruptible = dev_priv->mm.interruptible;
|
|
dev_priv->mm.interruptible = false;
|
|
|
|
/*
|
|
* GPU can automatically power down the render unit if given a page
|
|
* to save state.
|
|
*/
|
|
ret = intel_ring_begin(ring, 6);
|
|
if (ret) {
|
|
ironlake_teardown_rc6(dev);
|
|
dev_priv->mm.interruptible = was_interruptible;
|
|
return;
|
|
}
|
|
|
|
intel_ring_emit(ring, MI_SUSPEND_FLUSH | MI_SUSPEND_FLUSH_EN);
|
|
intel_ring_emit(ring, MI_SET_CONTEXT);
|
|
intel_ring_emit(ring, dev_priv->ips.renderctx->gtt_offset |
|
|
MI_MM_SPACE_GTT |
|
|
MI_SAVE_EXT_STATE_EN |
|
|
MI_RESTORE_EXT_STATE_EN |
|
|
MI_RESTORE_INHIBIT);
|
|
intel_ring_emit(ring, MI_SUSPEND_FLUSH);
|
|
intel_ring_emit(ring, MI_NOOP);
|
|
intel_ring_emit(ring, MI_FLUSH);
|
|
intel_ring_advance(ring);
|
|
|
|
/*
|
|
* Wait for the command parser to advance past MI_SET_CONTEXT. The HW
|
|
* does an implicit flush, combined with MI_FLUSH above, it should be
|
|
* safe to assume that renderctx is valid
|
|
*/
|
|
ret = intel_ring_idle(ring);
|
|
dev_priv->mm.interruptible = was_interruptible;
|
|
if (ret) {
|
|
DRM_ERROR("failed to enable ironlake power savings\n");
|
|
ironlake_teardown_rc6(dev);
|
|
return;
|
|
}
|
|
|
|
I915_WRITE(PWRCTXA, dev_priv->ips.pwrctx->gtt_offset | PWRCTX_EN);
|
|
I915_WRITE(RSTDBYCTL, I915_READ(RSTDBYCTL) & ~RCX_SW_EXIT);
|
|
}
|
|
|
|
static unsigned long intel_pxfreq(u32 vidfreq)
|
|
{
|
|
unsigned long freq;
|
|
int div = (vidfreq & 0x3f0000) >> 16;
|
|
int post = (vidfreq & 0x3000) >> 12;
|
|
int pre = (vidfreq & 0x7);
|
|
|
|
if (!pre)
|
|
return 0;
|
|
|
|
freq = ((div * 133333) / ((1<<post) * pre));
|
|
|
|
return freq;
|
|
}
|
|
|
|
static const struct cparams {
|
|
u16 i;
|
|
u16 t;
|
|
u16 m;
|
|
u16 c;
|
|
} cparams[] = {
|
|
{ 1, 1333, 301, 28664 },
|
|
{ 1, 1066, 294, 24460 },
|
|
{ 1, 800, 294, 25192 },
|
|
{ 0, 1333, 276, 27605 },
|
|
{ 0, 1066, 276, 27605 },
|
|
{ 0, 800, 231, 23784 },
|
|
};
|
|
|
|
static unsigned long __i915_chipset_val(struct drm_i915_private *dev_priv)
|
|
{
|
|
u64 total_count, diff, ret;
|
|
u32 count1, count2, count3, m = 0, c = 0;
|
|
unsigned long now = jiffies_to_msecs(jiffies), diff1;
|
|
int i;
|
|
|
|
assert_spin_locked(&mchdev_lock);
|
|
|
|
diff1 = now - dev_priv->ips.last_time1;
|
|
|
|
/* Prevent division-by-zero if we are asking too fast.
|
|
* Also, we don't get interesting results if we are polling
|
|
* faster than once in 10ms, so just return the saved value
|
|
* in such cases.
|
|
*/
|
|
if (diff1 <= 10)
|
|
return dev_priv->ips.chipset_power;
|
|
|
|
count1 = I915_READ(DMIEC);
|
|
count2 = I915_READ(DDREC);
|
|
count3 = I915_READ(CSIEC);
|
|
|
|
total_count = count1 + count2 + count3;
|
|
|
|
/* FIXME: handle per-counter overflow */
|
|
if (total_count < dev_priv->ips.last_count1) {
|
|
diff = ~0UL - dev_priv->ips.last_count1;
|
|
diff += total_count;
|
|
} else {
|
|
diff = total_count - dev_priv->ips.last_count1;
|
|
}
|
|
|
|
for (i = 0; i < ARRAY_SIZE(cparams); i++) {
|
|
if (cparams[i].i == dev_priv->ips.c_m &&
|
|
cparams[i].t == dev_priv->ips.r_t) {
|
|
m = cparams[i].m;
|
|
c = cparams[i].c;
|
|
break;
|
|
}
|
|
}
|
|
|
|
diff = div_u64(diff, diff1);
|
|
ret = ((m * diff) + c);
|
|
ret = div_u64(ret, 10);
|
|
|
|
dev_priv->ips.last_count1 = total_count;
|
|
dev_priv->ips.last_time1 = now;
|
|
|
|
dev_priv->ips.chipset_power = ret;
|
|
|
|
return ret;
|
|
}
|
|
|
|
unsigned long i915_chipset_val(struct drm_i915_private *dev_priv)
|
|
{
|
|
unsigned long val;
|
|
|
|
if (dev_priv->info->gen != 5)
|
|
return 0;
|
|
|
|
spin_lock_irq(&mchdev_lock);
|
|
|
|
val = __i915_chipset_val(dev_priv);
|
|
|
|
spin_unlock_irq(&mchdev_lock);
|
|
|
|
return val;
|
|
}
|
|
|
|
unsigned long i915_mch_val(struct drm_i915_private *dev_priv)
|
|
{
|
|
unsigned long m, x, b;
|
|
u32 tsfs;
|
|
|
|
tsfs = I915_READ(TSFS);
|
|
|
|
m = ((tsfs & TSFS_SLOPE_MASK) >> TSFS_SLOPE_SHIFT);
|
|
x = I915_READ8(TR1);
|
|
|
|
b = tsfs & TSFS_INTR_MASK;
|
|
|
|
return ((m * x) / 127) - b;
|
|
}
|
|
|
|
static u16 pvid_to_extvid(struct drm_i915_private *dev_priv, u8 pxvid)
|
|
{
|
|
static const struct v_table {
|
|
u16 vd; /* in .1 mil */
|
|
u16 vm; /* in .1 mil */
|
|
} v_table[] = {
|
|
{ 0, 0, },
|
|
{ 375, 0, },
|
|
{ 500, 0, },
|
|
{ 625, 0, },
|
|
{ 750, 0, },
|
|
{ 875, 0, },
|
|
{ 1000, 0, },
|
|
{ 1125, 0, },
|
|
{ 4125, 3000, },
|
|
{ 4125, 3000, },
|
|
{ 4125, 3000, },
|
|
{ 4125, 3000, },
|
|
{ 4125, 3000, },
|
|
{ 4125, 3000, },
|
|
{ 4125, 3000, },
|
|
{ 4125, 3000, },
|
|
{ 4125, 3000, },
|
|
{ 4125, 3000, },
|
|
{ 4125, 3000, },
|
|
{ 4125, 3000, },
|
|
{ 4125, 3000, },
|
|
{ 4125, 3000, },
|
|
{ 4125, 3000, },
|
|
{ 4125, 3000, },
|
|
{ 4125, 3000, },
|
|
{ 4125, 3000, },
|
|
{ 4125, 3000, },
|
|
{ 4125, 3000, },
|
|
{ 4125, 3000, },
|
|
{ 4125, 3000, },
|
|
{ 4125, 3000, },
|
|
{ 4125, 3000, },
|
|
{ 4250, 3125, },
|
|
{ 4375, 3250, },
|
|
{ 4500, 3375, },
|
|
{ 4625, 3500, },
|
|
{ 4750, 3625, },
|
|
{ 4875, 3750, },
|
|
{ 5000, 3875, },
|
|
{ 5125, 4000, },
|
|
{ 5250, 4125, },
|
|
{ 5375, 4250, },
|
|
{ 5500, 4375, },
|
|
{ 5625, 4500, },
|
|
{ 5750, 4625, },
|
|
{ 5875, 4750, },
|
|
{ 6000, 4875, },
|
|
{ 6125, 5000, },
|
|
{ 6250, 5125, },
|
|
{ 6375, 5250, },
|
|
{ 6500, 5375, },
|
|
{ 6625, 5500, },
|
|
{ 6750, 5625, },
|
|
{ 6875, 5750, },
|
|
{ 7000, 5875, },
|
|
{ 7125, 6000, },
|
|
{ 7250, 6125, },
|
|
{ 7375, 6250, },
|
|
{ 7500, 6375, },
|
|
{ 7625, 6500, },
|
|
{ 7750, 6625, },
|
|
{ 7875, 6750, },
|
|
{ 8000, 6875, },
|
|
{ 8125, 7000, },
|
|
{ 8250, 7125, },
|
|
{ 8375, 7250, },
|
|
{ 8500, 7375, },
|
|
{ 8625, 7500, },
|
|
{ 8750, 7625, },
|
|
{ 8875, 7750, },
|
|
{ 9000, 7875, },
|
|
{ 9125, 8000, },
|
|
{ 9250, 8125, },
|
|
{ 9375, 8250, },
|
|
{ 9500, 8375, },
|
|
{ 9625, 8500, },
|
|
{ 9750, 8625, },
|
|
{ 9875, 8750, },
|
|
{ 10000, 8875, },
|
|
{ 10125, 9000, },
|
|
{ 10250, 9125, },
|
|
{ 10375, 9250, },
|
|
{ 10500, 9375, },
|
|
{ 10625, 9500, },
|
|
{ 10750, 9625, },
|
|
{ 10875, 9750, },
|
|
{ 11000, 9875, },
|
|
{ 11125, 10000, },
|
|
{ 11250, 10125, },
|
|
{ 11375, 10250, },
|
|
{ 11500, 10375, },
|
|
{ 11625, 10500, },
|
|
{ 11750, 10625, },
|
|
{ 11875, 10750, },
|
|
{ 12000, 10875, },
|
|
{ 12125, 11000, },
|
|
{ 12250, 11125, },
|
|
{ 12375, 11250, },
|
|
{ 12500, 11375, },
|
|
{ 12625, 11500, },
|
|
{ 12750, 11625, },
|
|
{ 12875, 11750, },
|
|
{ 13000, 11875, },
|
|
{ 13125, 12000, },
|
|
{ 13250, 12125, },
|
|
{ 13375, 12250, },
|
|
{ 13500, 12375, },
|
|
{ 13625, 12500, },
|
|
{ 13750, 12625, },
|
|
{ 13875, 12750, },
|
|
{ 14000, 12875, },
|
|
{ 14125, 13000, },
|
|
{ 14250, 13125, },
|
|
{ 14375, 13250, },
|
|
{ 14500, 13375, },
|
|
{ 14625, 13500, },
|
|
{ 14750, 13625, },
|
|
{ 14875, 13750, },
|
|
{ 15000, 13875, },
|
|
{ 15125, 14000, },
|
|
{ 15250, 14125, },
|
|
{ 15375, 14250, },
|
|
{ 15500, 14375, },
|
|
{ 15625, 14500, },
|
|
{ 15750, 14625, },
|
|
{ 15875, 14750, },
|
|
{ 16000, 14875, },
|
|
{ 16125, 15000, },
|
|
};
|
|
if (dev_priv->info->is_mobile)
|
|
return v_table[pxvid].vm;
|
|
else
|
|
return v_table[pxvid].vd;
|
|
}
|
|
|
|
static void __i915_update_gfx_val(struct drm_i915_private *dev_priv)
|
|
{
|
|
struct timespec now, diff1;
|
|
u64 diff;
|
|
unsigned long diffms;
|
|
u32 count;
|
|
|
|
assert_spin_locked(&mchdev_lock);
|
|
|
|
getrawmonotonic(&now);
|
|
diff1 = timespec_sub(now, dev_priv->ips.last_time2);
|
|
|
|
/* Don't divide by 0 */
|
|
diffms = diff1.tv_sec * 1000 + diff1.tv_nsec / 1000000;
|
|
if (!diffms)
|
|
return;
|
|
|
|
count = I915_READ(GFXEC);
|
|
|
|
if (count < dev_priv->ips.last_count2) {
|
|
diff = ~0UL - dev_priv->ips.last_count2;
|
|
diff += count;
|
|
} else {
|
|
diff = count - dev_priv->ips.last_count2;
|
|
}
|
|
|
|
dev_priv->ips.last_count2 = count;
|
|
dev_priv->ips.last_time2 = now;
|
|
|
|
/* More magic constants... */
|
|
diff = diff * 1181;
|
|
diff = div_u64(diff, diffms * 10);
|
|
dev_priv->ips.gfx_power = diff;
|
|
}
|
|
|
|
void i915_update_gfx_val(struct drm_i915_private *dev_priv)
|
|
{
|
|
if (dev_priv->info->gen != 5)
|
|
return;
|
|
|
|
spin_lock_irq(&mchdev_lock);
|
|
|
|
__i915_update_gfx_val(dev_priv);
|
|
|
|
spin_unlock_irq(&mchdev_lock);
|
|
}
|
|
|
|
static unsigned long __i915_gfx_val(struct drm_i915_private *dev_priv)
|
|
{
|
|
unsigned long t, corr, state1, corr2, state2;
|
|
u32 pxvid, ext_v;
|
|
|
|
assert_spin_locked(&mchdev_lock);
|
|
|
|
pxvid = I915_READ(PXVFREQ_BASE + (dev_priv->rps.cur_delay * 4));
|
|
pxvid = (pxvid >> 24) & 0x7f;
|
|
ext_v = pvid_to_extvid(dev_priv, pxvid);
|
|
|
|
state1 = ext_v;
|
|
|
|
t = i915_mch_val(dev_priv);
|
|
|
|
/* Revel in the empirically derived constants */
|
|
|
|
/* Correction factor in 1/100000 units */
|
|
if (t > 80)
|
|
corr = ((t * 2349) + 135940);
|
|
else if (t >= 50)
|
|
corr = ((t * 964) + 29317);
|
|
else /* < 50 */
|
|
corr = ((t * 301) + 1004);
|
|
|
|
corr = corr * ((150142 * state1) / 10000 - 78642);
|
|
corr /= 100000;
|
|
corr2 = (corr * dev_priv->ips.corr);
|
|
|
|
state2 = (corr2 * state1) / 10000;
|
|
state2 /= 100; /* convert to mW */
|
|
|
|
__i915_update_gfx_val(dev_priv);
|
|
|
|
return dev_priv->ips.gfx_power + state2;
|
|
}
|
|
|
|
unsigned long i915_gfx_val(struct drm_i915_private *dev_priv)
|
|
{
|
|
unsigned long val;
|
|
|
|
if (dev_priv->info->gen != 5)
|
|
return 0;
|
|
|
|
spin_lock_irq(&mchdev_lock);
|
|
|
|
val = __i915_gfx_val(dev_priv);
|
|
|
|
spin_unlock_irq(&mchdev_lock);
|
|
|
|
return val;
|
|
}
|
|
|
|
/**
|
|
* i915_read_mch_val - return value for IPS use
|
|
*
|
|
* Calculate and return a value for the IPS driver to use when deciding whether
|
|
* we have thermal and power headroom to increase CPU or GPU power budget.
|
|
*/
|
|
unsigned long i915_read_mch_val(void)
|
|
{
|
|
struct drm_i915_private *dev_priv;
|
|
unsigned long chipset_val, graphics_val, ret = 0;
|
|
|
|
spin_lock_irq(&mchdev_lock);
|
|
if (!i915_mch_dev)
|
|
goto out_unlock;
|
|
dev_priv = i915_mch_dev;
|
|
|
|
chipset_val = __i915_chipset_val(dev_priv);
|
|
graphics_val = __i915_gfx_val(dev_priv);
|
|
|
|
ret = chipset_val + graphics_val;
|
|
|
|
out_unlock:
|
|
spin_unlock_irq(&mchdev_lock);
|
|
|
|
return ret;
|
|
}
|
|
EXPORT_SYMBOL_GPL(i915_read_mch_val);
|
|
|
|
/**
|
|
* i915_gpu_raise - raise GPU frequency limit
|
|
*
|
|
* Raise the limit; IPS indicates we have thermal headroom.
|
|
*/
|
|
bool i915_gpu_raise(void)
|
|
{
|
|
struct drm_i915_private *dev_priv;
|
|
bool ret = true;
|
|
|
|
spin_lock_irq(&mchdev_lock);
|
|
if (!i915_mch_dev) {
|
|
ret = false;
|
|
goto out_unlock;
|
|
}
|
|
dev_priv = i915_mch_dev;
|
|
|
|
if (dev_priv->ips.max_delay > dev_priv->ips.fmax)
|
|
dev_priv->ips.max_delay--;
|
|
|
|
out_unlock:
|
|
spin_unlock_irq(&mchdev_lock);
|
|
|
|
return ret;
|
|
}
|
|
EXPORT_SYMBOL_GPL(i915_gpu_raise);
|
|
|
|
/**
|
|
* i915_gpu_lower - lower GPU frequency limit
|
|
*
|
|
* IPS indicates we're close to a thermal limit, so throttle back the GPU
|
|
* frequency maximum.
|
|
*/
|
|
bool i915_gpu_lower(void)
|
|
{
|
|
struct drm_i915_private *dev_priv;
|
|
bool ret = true;
|
|
|
|
spin_lock_irq(&mchdev_lock);
|
|
if (!i915_mch_dev) {
|
|
ret = false;
|
|
goto out_unlock;
|
|
}
|
|
dev_priv = i915_mch_dev;
|
|
|
|
if (dev_priv->ips.max_delay < dev_priv->ips.min_delay)
|
|
dev_priv->ips.max_delay++;
|
|
|
|
out_unlock:
|
|
spin_unlock_irq(&mchdev_lock);
|
|
|
|
return ret;
|
|
}
|
|
EXPORT_SYMBOL_GPL(i915_gpu_lower);
|
|
|
|
/**
|
|
* i915_gpu_busy - indicate GPU business to IPS
|
|
*
|
|
* Tell the IPS driver whether or not the GPU is busy.
|
|
*/
|
|
bool i915_gpu_busy(void)
|
|
{
|
|
struct drm_i915_private *dev_priv;
|
|
struct intel_ring_buffer *ring;
|
|
bool ret = false;
|
|
int i;
|
|
|
|
spin_lock_irq(&mchdev_lock);
|
|
if (!i915_mch_dev)
|
|
goto out_unlock;
|
|
dev_priv = i915_mch_dev;
|
|
|
|
for_each_ring(ring, dev_priv, i)
|
|
ret |= !list_empty(&ring->request_list);
|
|
|
|
out_unlock:
|
|
spin_unlock_irq(&mchdev_lock);
|
|
|
|
return ret;
|
|
}
|
|
EXPORT_SYMBOL_GPL(i915_gpu_busy);
|
|
|
|
/**
|
|
* i915_gpu_turbo_disable - disable graphics turbo
|
|
*
|
|
* Disable graphics turbo by resetting the max frequency and setting the
|
|
* current frequency to the default.
|
|
*/
|
|
bool i915_gpu_turbo_disable(void)
|
|
{
|
|
struct drm_i915_private *dev_priv;
|
|
bool ret = true;
|
|
|
|
spin_lock_irq(&mchdev_lock);
|
|
if (!i915_mch_dev) {
|
|
ret = false;
|
|
goto out_unlock;
|
|
}
|
|
dev_priv = i915_mch_dev;
|
|
|
|
dev_priv->ips.max_delay = dev_priv->ips.fstart;
|
|
|
|
if (!ironlake_set_drps(dev_priv->dev, dev_priv->ips.fstart))
|
|
ret = false;
|
|
|
|
out_unlock:
|
|
spin_unlock_irq(&mchdev_lock);
|
|
|
|
return ret;
|
|
}
|
|
EXPORT_SYMBOL_GPL(i915_gpu_turbo_disable);
|
|
|
|
/**
|
|
* Tells the intel_ips driver that the i915 driver is now loaded, if
|
|
* IPS got loaded first.
|
|
*
|
|
* This awkward dance is so that neither module has to depend on the
|
|
* other in order for IPS to do the appropriate communication of
|
|
* GPU turbo limits to i915.
|
|
*/
|
|
static void
|
|
ips_ping_for_i915_load(void)
|
|
{
|
|
void (*link)(void);
|
|
|
|
link = symbol_get(ips_link_to_i915_driver);
|
|
if (link) {
|
|
link();
|
|
symbol_put(ips_link_to_i915_driver);
|
|
}
|
|
}
|
|
|
|
void intel_gpu_ips_init(struct drm_i915_private *dev_priv)
|
|
{
|
|
/* We only register the i915 ips part with intel-ips once everything is
|
|
* set up, to avoid intel-ips sneaking in and reading bogus values. */
|
|
spin_lock_irq(&mchdev_lock);
|
|
i915_mch_dev = dev_priv;
|
|
spin_unlock_irq(&mchdev_lock);
|
|
|
|
ips_ping_for_i915_load();
|
|
}
|
|
|
|
void intel_gpu_ips_teardown(void)
|
|
{
|
|
spin_lock_irq(&mchdev_lock);
|
|
i915_mch_dev = NULL;
|
|
spin_unlock_irq(&mchdev_lock);
|
|
}
|
|
static void intel_init_emon(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
u32 lcfuse;
|
|
u8 pxw[16];
|
|
int i;
|
|
|
|
/* Disable to program */
|
|
I915_WRITE(ECR, 0);
|
|
POSTING_READ(ECR);
|
|
|
|
/* Program energy weights for various events */
|
|
I915_WRITE(SDEW, 0x15040d00);
|
|
I915_WRITE(CSIEW0, 0x007f0000);
|
|
I915_WRITE(CSIEW1, 0x1e220004);
|
|
I915_WRITE(CSIEW2, 0x04000004);
|
|
|
|
for (i = 0; i < 5; i++)
|
|
I915_WRITE(PEW + (i * 4), 0);
|
|
for (i = 0; i < 3; i++)
|
|
I915_WRITE(DEW + (i * 4), 0);
|
|
|
|
/* Program P-state weights to account for frequency power adjustment */
|
|
for (i = 0; i < 16; i++) {
|
|
u32 pxvidfreq = I915_READ(PXVFREQ_BASE + (i * 4));
|
|
unsigned long freq = intel_pxfreq(pxvidfreq);
|
|
unsigned long vid = (pxvidfreq & PXVFREQ_PX_MASK) >>
|
|
PXVFREQ_PX_SHIFT;
|
|
unsigned long val;
|
|
|
|
val = vid * vid;
|
|
val *= (freq / 1000);
|
|
val *= 255;
|
|
val /= (127*127*900);
|
|
if (val > 0xff)
|
|
DRM_ERROR("bad pxval: %ld\n", val);
|
|
pxw[i] = val;
|
|
}
|
|
/* Render standby states get 0 weight */
|
|
pxw[14] = 0;
|
|
pxw[15] = 0;
|
|
|
|
for (i = 0; i < 4; i++) {
|
|
u32 val = (pxw[i*4] << 24) | (pxw[(i*4)+1] << 16) |
|
|
(pxw[(i*4)+2] << 8) | (pxw[(i*4)+3]);
|
|
I915_WRITE(PXW + (i * 4), val);
|
|
}
|
|
|
|
/* Adjust magic regs to magic values (more experimental results) */
|
|
I915_WRITE(OGW0, 0);
|
|
I915_WRITE(OGW1, 0);
|
|
I915_WRITE(EG0, 0x00007f00);
|
|
I915_WRITE(EG1, 0x0000000e);
|
|
I915_WRITE(EG2, 0x000e0000);
|
|
I915_WRITE(EG3, 0x68000300);
|
|
I915_WRITE(EG4, 0x42000000);
|
|
I915_WRITE(EG5, 0x00140031);
|
|
I915_WRITE(EG6, 0);
|
|
I915_WRITE(EG7, 0);
|
|
|
|
for (i = 0; i < 8; i++)
|
|
I915_WRITE(PXWL + (i * 4), 0);
|
|
|
|
/* Enable PMON + select events */
|
|
I915_WRITE(ECR, 0x80000019);
|
|
|
|
lcfuse = I915_READ(LCFUSE02);
|
|
|
|
dev_priv->ips.corr = (lcfuse & LCFUSE_HIV_MASK);
|
|
}
|
|
|
|
void intel_disable_gt_powersave(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
|
|
/* Interrupts should be disabled already to avoid re-arming. */
|
|
WARN_ON(dev->irq_enabled);
|
|
|
|
if (IS_IRONLAKE_M(dev)) {
|
|
ironlake_disable_drps(dev);
|
|
ironlake_disable_rc6(dev);
|
|
} else if (INTEL_INFO(dev)->gen >= 6) {
|
|
cancel_delayed_work_sync(&dev_priv->rps.delayed_resume_work);
|
|
cancel_work_sync(&dev_priv->rps.work);
|
|
if (IS_VALLEYVIEW(dev))
|
|
cancel_delayed_work_sync(&dev_priv->rps.vlv_work);
|
|
mutex_lock(&dev_priv->rps.hw_lock);
|
|
if (IS_VALLEYVIEW(dev))
|
|
valleyview_disable_rps(dev);
|
|
else
|
|
gen6_disable_rps(dev);
|
|
mutex_unlock(&dev_priv->rps.hw_lock);
|
|
}
|
|
}
|
|
|
|
static void intel_gen6_powersave_work(struct work_struct *work)
|
|
{
|
|
struct drm_i915_private *dev_priv =
|
|
container_of(work, struct drm_i915_private,
|
|
rps.delayed_resume_work.work);
|
|
struct drm_device *dev = dev_priv->dev;
|
|
|
|
mutex_lock(&dev_priv->rps.hw_lock);
|
|
|
|
if (IS_VALLEYVIEW(dev)) {
|
|
valleyview_enable_rps(dev);
|
|
} else {
|
|
gen6_enable_rps(dev);
|
|
gen6_update_ring_freq(dev);
|
|
}
|
|
mutex_unlock(&dev_priv->rps.hw_lock);
|
|
}
|
|
|
|
void intel_enable_gt_powersave(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
|
|
if (IS_IRONLAKE_M(dev)) {
|
|
ironlake_enable_drps(dev);
|
|
ironlake_enable_rc6(dev);
|
|
intel_init_emon(dev);
|
|
} else if (IS_GEN6(dev) || IS_GEN7(dev)) {
|
|
/*
|
|
* PCU communication is slow and this doesn't need to be
|
|
* done at any specific time, so do this out of our fast path
|
|
* to make resume and init faster.
|
|
*/
|
|
schedule_delayed_work(&dev_priv->rps.delayed_resume_work,
|
|
round_jiffies_up_relative(HZ));
|
|
}
|
|
}
|
|
|
|
static void ibx_init_clock_gating(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
|
|
/*
|
|
* On Ibex Peak and Cougar Point, we need to disable clock
|
|
* gating for the panel power sequencer or it will fail to
|
|
* start up when no ports are active.
|
|
*/
|
|
I915_WRITE(SOUTH_DSPCLK_GATE_D, PCH_DPLSUNIT_CLOCK_GATE_DISABLE);
|
|
}
|
|
|
|
static void g4x_disable_trickle_feed(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
int pipe;
|
|
|
|
for_each_pipe(pipe) {
|
|
I915_WRITE(DSPCNTR(pipe),
|
|
I915_READ(DSPCNTR(pipe)) |
|
|
DISPPLANE_TRICKLE_FEED_DISABLE);
|
|
intel_flush_display_plane(dev_priv, pipe);
|
|
}
|
|
}
|
|
|
|
static void ironlake_init_clock_gating(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
uint32_t dspclk_gate = ILK_VRHUNIT_CLOCK_GATE_DISABLE;
|
|
|
|
/* Required for FBC */
|
|
dspclk_gate |= ILK_DPFCRUNIT_CLOCK_GATE_DISABLE |
|
|
ILK_DPFCUNIT_CLOCK_GATE_DISABLE |
|
|
ILK_DPFDUNIT_CLOCK_GATE_ENABLE;
|
|
|
|
I915_WRITE(PCH_3DCGDIS0,
|
|
MARIUNIT_CLOCK_GATE_DISABLE |
|
|
SVSMUNIT_CLOCK_GATE_DISABLE);
|
|
I915_WRITE(PCH_3DCGDIS1,
|
|
VFMUNIT_CLOCK_GATE_DISABLE);
|
|
|
|
/*
|
|
* According to the spec the following bits should be set in
|
|
* order to enable memory self-refresh
|
|
* The bit 22/21 of 0x42004
|
|
* The bit 5 of 0x42020
|
|
* The bit 15 of 0x45000
|
|
*/
|
|
I915_WRITE(ILK_DISPLAY_CHICKEN2,
|
|
(I915_READ(ILK_DISPLAY_CHICKEN2) |
|
|
ILK_DPARB_GATE | ILK_VSDPFD_FULL));
|
|
dspclk_gate |= ILK_DPARBUNIT_CLOCK_GATE_ENABLE;
|
|
I915_WRITE(DISP_ARB_CTL,
|
|
(I915_READ(DISP_ARB_CTL) |
|
|
DISP_FBC_WM_DIS));
|
|
I915_WRITE(WM3_LP_ILK, 0);
|
|
I915_WRITE(WM2_LP_ILK, 0);
|
|
I915_WRITE(WM1_LP_ILK, 0);
|
|
|
|
/*
|
|
* Based on the document from hardware guys the following bits
|
|
* should be set unconditionally in order to enable FBC.
|
|
* The bit 22 of 0x42000
|
|
* The bit 22 of 0x42004
|
|
* The bit 7,8,9 of 0x42020.
|
|
*/
|
|
if (IS_IRONLAKE_M(dev)) {
|
|
I915_WRITE(ILK_DISPLAY_CHICKEN1,
|
|
I915_READ(ILK_DISPLAY_CHICKEN1) |
|
|
ILK_FBCQ_DIS);
|
|
I915_WRITE(ILK_DISPLAY_CHICKEN2,
|
|
I915_READ(ILK_DISPLAY_CHICKEN2) |
|
|
ILK_DPARB_GATE);
|
|
}
|
|
|
|
I915_WRITE(ILK_DSPCLK_GATE_D, dspclk_gate);
|
|
|
|
I915_WRITE(ILK_DISPLAY_CHICKEN2,
|
|
I915_READ(ILK_DISPLAY_CHICKEN2) |
|
|
ILK_ELPIN_409_SELECT);
|
|
I915_WRITE(_3D_CHICKEN2,
|
|
_3D_CHICKEN2_WM_READ_PIPELINED << 16 |
|
|
_3D_CHICKEN2_WM_READ_PIPELINED);
|
|
|
|
/* WaDisableRenderCachePipelinedFlush:ilk */
|
|
I915_WRITE(CACHE_MODE_0,
|
|
_MASKED_BIT_ENABLE(CM0_PIPELINED_RENDER_FLUSH_DISABLE));
|
|
|
|
g4x_disable_trickle_feed(dev);
|
|
|
|
ibx_init_clock_gating(dev);
|
|
}
|
|
|
|
static void cpt_init_clock_gating(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
int pipe;
|
|
uint32_t val;
|
|
|
|
/*
|
|
* On Ibex Peak and Cougar Point, we need to disable clock
|
|
* gating for the panel power sequencer or it will fail to
|
|
* start up when no ports are active.
|
|
*/
|
|
I915_WRITE(SOUTH_DSPCLK_GATE_D, PCH_DPLSUNIT_CLOCK_GATE_DISABLE);
|
|
I915_WRITE(SOUTH_CHICKEN2, I915_READ(SOUTH_CHICKEN2) |
|
|
DPLS_EDP_PPS_FIX_DIS);
|
|
/* The below fixes the weird display corruption, a few pixels shifted
|
|
* downward, on (only) LVDS of some HP laptops with IVY.
|
|
*/
|
|
for_each_pipe(pipe) {
|
|
val = I915_READ(TRANS_CHICKEN2(pipe));
|
|
val |= TRANS_CHICKEN2_TIMING_OVERRIDE;
|
|
val &= ~TRANS_CHICKEN2_FDI_POLARITY_REVERSED;
|
|
if (dev_priv->vbt.fdi_rx_polarity_inverted)
|
|
val |= TRANS_CHICKEN2_FDI_POLARITY_REVERSED;
|
|
val &= ~TRANS_CHICKEN2_FRAME_START_DELAY_MASK;
|
|
val &= ~TRANS_CHICKEN2_DISABLE_DEEP_COLOR_COUNTER;
|
|
val &= ~TRANS_CHICKEN2_DISABLE_DEEP_COLOR_MODESWITCH;
|
|
I915_WRITE(TRANS_CHICKEN2(pipe), val);
|
|
}
|
|
/* WADP0ClockGatingDisable */
|
|
for_each_pipe(pipe) {
|
|
I915_WRITE(TRANS_CHICKEN1(pipe),
|
|
TRANS_CHICKEN1_DP0UNIT_GC_DISABLE);
|
|
}
|
|
}
|
|
|
|
static void gen6_check_mch_setup(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
uint32_t tmp;
|
|
|
|
tmp = I915_READ(MCH_SSKPD);
|
|
if ((tmp & MCH_SSKPD_WM0_MASK) != MCH_SSKPD_WM0_VAL) {
|
|
DRM_INFO("Wrong MCH_SSKPD value: 0x%08x\n", tmp);
|
|
DRM_INFO("This can cause pipe underruns and display issues.\n");
|
|
DRM_INFO("Please upgrade your BIOS to fix this.\n");
|
|
}
|
|
}
|
|
|
|
static void gen6_init_clock_gating(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
uint32_t dspclk_gate = ILK_VRHUNIT_CLOCK_GATE_DISABLE;
|
|
|
|
I915_WRITE(ILK_DSPCLK_GATE_D, dspclk_gate);
|
|
|
|
I915_WRITE(ILK_DISPLAY_CHICKEN2,
|
|
I915_READ(ILK_DISPLAY_CHICKEN2) |
|
|
ILK_ELPIN_409_SELECT);
|
|
|
|
/* WaDisableHiZPlanesWhenMSAAEnabled:snb */
|
|
I915_WRITE(_3D_CHICKEN,
|
|
_MASKED_BIT_ENABLE(_3D_CHICKEN_HIZ_PLANE_DISABLE_MSAA_4X_SNB));
|
|
|
|
/* WaSetupGtModeTdRowDispatch:snb */
|
|
if (IS_SNB_GT1(dev))
|
|
I915_WRITE(GEN6_GT_MODE,
|
|
_MASKED_BIT_ENABLE(GEN6_TD_FOUR_ROW_DISPATCH_DISABLE));
|
|
|
|
I915_WRITE(WM3_LP_ILK, 0);
|
|
I915_WRITE(WM2_LP_ILK, 0);
|
|
I915_WRITE(WM1_LP_ILK, 0);
|
|
|
|
I915_WRITE(CACHE_MODE_0,
|
|
_MASKED_BIT_DISABLE(CM0_STC_EVICT_DISABLE_LRA_SNB));
|
|
|
|
I915_WRITE(GEN6_UCGCTL1,
|
|
I915_READ(GEN6_UCGCTL1) |
|
|
GEN6_BLBUNIT_CLOCK_GATE_DISABLE |
|
|
GEN6_CSUNIT_CLOCK_GATE_DISABLE);
|
|
|
|
/* According to the BSpec vol1g, bit 12 (RCPBUNIT) clock
|
|
* gating disable must be set. Failure to set it results in
|
|
* flickering pixels due to Z write ordering failures after
|
|
* some amount of runtime in the Mesa "fire" demo, and Unigine
|
|
* Sanctuary and Tropics, and apparently anything else with
|
|
* alpha test or pixel discard.
|
|
*
|
|
* According to the spec, bit 11 (RCCUNIT) must also be set,
|
|
* but we didn't debug actual testcases to find it out.
|
|
*
|
|
* Also apply WaDisableVDSUnitClockGating:snb and
|
|
* WaDisableRCPBUnitClockGating:snb.
|
|
*/
|
|
I915_WRITE(GEN6_UCGCTL2,
|
|
GEN7_VDSUNIT_CLOCK_GATE_DISABLE |
|
|
GEN6_RCPBUNIT_CLOCK_GATE_DISABLE |
|
|
GEN6_RCCUNIT_CLOCK_GATE_DISABLE);
|
|
|
|
/* Bspec says we need to always set all mask bits. */
|
|
I915_WRITE(_3D_CHICKEN3, (0xFFFF << 16) |
|
|
_3D_CHICKEN3_SF_DISABLE_FASTCLIP_CULL);
|
|
|
|
/*
|
|
* According to the spec the following bits should be
|
|
* set in order to enable memory self-refresh and fbc:
|
|
* The bit21 and bit22 of 0x42000
|
|
* The bit21 and bit22 of 0x42004
|
|
* The bit5 and bit7 of 0x42020
|
|
* The bit14 of 0x70180
|
|
* The bit14 of 0x71180
|
|
*/
|
|
I915_WRITE(ILK_DISPLAY_CHICKEN1,
|
|
I915_READ(ILK_DISPLAY_CHICKEN1) |
|
|
ILK_FBCQ_DIS | ILK_PABSTRETCH_DIS);
|
|
I915_WRITE(ILK_DISPLAY_CHICKEN2,
|
|
I915_READ(ILK_DISPLAY_CHICKEN2) |
|
|
ILK_DPARB_GATE | ILK_VSDPFD_FULL);
|
|
I915_WRITE(ILK_DSPCLK_GATE_D,
|
|
I915_READ(ILK_DSPCLK_GATE_D) |
|
|
ILK_DPARBUNIT_CLOCK_GATE_ENABLE |
|
|
ILK_DPFDUNIT_CLOCK_GATE_ENABLE);
|
|
|
|
/* WaMbcDriverBootEnable:snb */
|
|
I915_WRITE(GEN6_MBCTL, I915_READ(GEN6_MBCTL) |
|
|
GEN6_MBCTL_ENABLE_BOOT_FETCH);
|
|
|
|
g4x_disable_trickle_feed(dev);
|
|
|
|
/* The default value should be 0x200 according to docs, but the two
|
|
* platforms I checked have a 0 for this. (Maybe BIOS overrides?) */
|
|
I915_WRITE(GEN6_GT_MODE, _MASKED_BIT_DISABLE(0xffff));
|
|
I915_WRITE(GEN6_GT_MODE, _MASKED_BIT_ENABLE(GEN6_GT_MODE_HI));
|
|
|
|
cpt_init_clock_gating(dev);
|
|
|
|
gen6_check_mch_setup(dev);
|
|
}
|
|
|
|
static void gen7_setup_fixed_func_scheduler(struct drm_i915_private *dev_priv)
|
|
{
|
|
uint32_t reg = I915_READ(GEN7_FF_THREAD_MODE);
|
|
|
|
reg &= ~GEN7_FF_SCHED_MASK;
|
|
reg |= GEN7_FF_TS_SCHED_HW;
|
|
reg |= GEN7_FF_VS_SCHED_HW;
|
|
reg |= GEN7_FF_DS_SCHED_HW;
|
|
|
|
if (IS_HASWELL(dev_priv->dev))
|
|
reg &= ~GEN7_FF_VS_REF_CNT_FFME;
|
|
|
|
I915_WRITE(GEN7_FF_THREAD_MODE, reg);
|
|
}
|
|
|
|
static void lpt_init_clock_gating(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
|
|
/*
|
|
* TODO: this bit should only be enabled when really needed, then
|
|
* disabled when not needed anymore in order to save power.
|
|
*/
|
|
if (dev_priv->pch_id == INTEL_PCH_LPT_LP_DEVICE_ID_TYPE)
|
|
I915_WRITE(SOUTH_DSPCLK_GATE_D,
|
|
I915_READ(SOUTH_DSPCLK_GATE_D) |
|
|
PCH_LP_PARTITION_LEVEL_DISABLE);
|
|
|
|
/* WADPOClockGatingDisable:hsw */
|
|
I915_WRITE(_TRANSA_CHICKEN1,
|
|
I915_READ(_TRANSA_CHICKEN1) |
|
|
TRANS_CHICKEN1_DP0UNIT_GC_DISABLE);
|
|
}
|
|
|
|
static void lpt_suspend_hw(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
|
|
if (dev_priv->pch_id == INTEL_PCH_LPT_LP_DEVICE_ID_TYPE) {
|
|
uint32_t val = I915_READ(SOUTH_DSPCLK_GATE_D);
|
|
|
|
val &= ~PCH_LP_PARTITION_LEVEL_DISABLE;
|
|
I915_WRITE(SOUTH_DSPCLK_GATE_D, val);
|
|
}
|
|
}
|
|
|
|
static void haswell_init_clock_gating(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
|
|
I915_WRITE(WM3_LP_ILK, 0);
|
|
I915_WRITE(WM2_LP_ILK, 0);
|
|
I915_WRITE(WM1_LP_ILK, 0);
|
|
|
|
/* According to the spec, bit 13 (RCZUNIT) must be set on IVB.
|
|
* This implements the WaDisableRCZUnitClockGating:hsw workaround.
|
|
*/
|
|
I915_WRITE(GEN6_UCGCTL2, GEN6_RCZUNIT_CLOCK_GATE_DISABLE);
|
|
|
|
/* Apply the WaDisableRHWOOptimizationForRenderHang:hsw workaround. */
|
|
I915_WRITE(GEN7_COMMON_SLICE_CHICKEN1,
|
|
GEN7_CSC1_RHWO_OPT_DISABLE_IN_RCC);
|
|
|
|
/* WaApplyL3ControlAndL3ChickenMode:hsw */
|
|
I915_WRITE(GEN7_L3CNTLREG1,
|
|
GEN7_WA_FOR_GEN7_L3_CONTROL);
|
|
I915_WRITE(GEN7_L3_CHICKEN_MODE_REGISTER,
|
|
GEN7_WA_L3_CHICKEN_MODE);
|
|
|
|
/* This is required by WaCatErrorRejectionIssue:hsw */
|
|
I915_WRITE(GEN7_SQ_CHICKEN_MBCUNIT_CONFIG,
|
|
I915_READ(GEN7_SQ_CHICKEN_MBCUNIT_CONFIG) |
|
|
GEN7_SQ_CHICKEN_MBCUNIT_SQINTMOB);
|
|
|
|
g4x_disable_trickle_feed(dev);
|
|
|
|
/* WaVSRefCountFullforceMissDisable:hsw */
|
|
gen7_setup_fixed_func_scheduler(dev_priv);
|
|
|
|
/* WaDisable4x2SubspanOptimization:hsw */
|
|
I915_WRITE(CACHE_MODE_1,
|
|
_MASKED_BIT_ENABLE(PIXEL_SUBSPAN_COLLECT_OPT_DISABLE));
|
|
|
|
/* WaMbcDriverBootEnable:hsw */
|
|
I915_WRITE(GEN6_MBCTL, I915_READ(GEN6_MBCTL) |
|
|
GEN6_MBCTL_ENABLE_BOOT_FETCH);
|
|
|
|
/* WaSwitchSolVfFArbitrationPriority:hsw */
|
|
I915_WRITE(GAM_ECOCHK, I915_READ(GAM_ECOCHK) | HSW_ECOCHK_ARB_PRIO_SOL);
|
|
|
|
/* WaRsPkgCStateDisplayPMReq:hsw */
|
|
I915_WRITE(CHICKEN_PAR1_1,
|
|
I915_READ(CHICKEN_PAR1_1) | FORCE_ARB_IDLE_PLANES);
|
|
|
|
lpt_init_clock_gating(dev);
|
|
}
|
|
|
|
static void ivybridge_init_clock_gating(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
uint32_t snpcr;
|
|
|
|
I915_WRITE(WM3_LP_ILK, 0);
|
|
I915_WRITE(WM2_LP_ILK, 0);
|
|
I915_WRITE(WM1_LP_ILK, 0);
|
|
|
|
I915_WRITE(ILK_DSPCLK_GATE_D, ILK_VRHUNIT_CLOCK_GATE_DISABLE);
|
|
|
|
/* WaDisableEarlyCull:ivb */
|
|
I915_WRITE(_3D_CHICKEN3,
|
|
_MASKED_BIT_ENABLE(_3D_CHICKEN_SF_DISABLE_OBJEND_CULL));
|
|
|
|
/* WaDisableBackToBackFlipFix:ivb */
|
|
I915_WRITE(IVB_CHICKEN3,
|
|
CHICKEN3_DGMG_REQ_OUT_FIX_DISABLE |
|
|
CHICKEN3_DGMG_DONE_FIX_DISABLE);
|
|
|
|
/* WaDisablePSDDualDispatchEnable:ivb */
|
|
if (IS_IVB_GT1(dev))
|
|
I915_WRITE(GEN7_HALF_SLICE_CHICKEN1,
|
|
_MASKED_BIT_ENABLE(GEN7_PSD_SINGLE_PORT_DISPATCH_ENABLE));
|
|
else
|
|
I915_WRITE(GEN7_HALF_SLICE_CHICKEN1_GT2,
|
|
_MASKED_BIT_ENABLE(GEN7_PSD_SINGLE_PORT_DISPATCH_ENABLE));
|
|
|
|
/* Apply the WaDisableRHWOOptimizationForRenderHang:ivb workaround. */
|
|
I915_WRITE(GEN7_COMMON_SLICE_CHICKEN1,
|
|
GEN7_CSC1_RHWO_OPT_DISABLE_IN_RCC);
|
|
|
|
/* WaApplyL3ControlAndL3ChickenMode:ivb */
|
|
I915_WRITE(GEN7_L3CNTLREG1,
|
|
GEN7_WA_FOR_GEN7_L3_CONTROL);
|
|
I915_WRITE(GEN7_L3_CHICKEN_MODE_REGISTER,
|
|
GEN7_WA_L3_CHICKEN_MODE);
|
|
if (IS_IVB_GT1(dev))
|
|
I915_WRITE(GEN7_ROW_CHICKEN2,
|
|
_MASKED_BIT_ENABLE(DOP_CLOCK_GATING_DISABLE));
|
|
else
|
|
I915_WRITE(GEN7_ROW_CHICKEN2_GT2,
|
|
_MASKED_BIT_ENABLE(DOP_CLOCK_GATING_DISABLE));
|
|
|
|
|
|
/* WaForceL3Serialization:ivb */
|
|
I915_WRITE(GEN7_L3SQCREG4, I915_READ(GEN7_L3SQCREG4) &
|
|
~L3SQ_URB_READ_CAM_MATCH_DISABLE);
|
|
|
|
/* According to the BSpec vol1g, bit 12 (RCPBUNIT) clock
|
|
* gating disable must be set. Failure to set it results in
|
|
* flickering pixels due to Z write ordering failures after
|
|
* some amount of runtime in the Mesa "fire" demo, and Unigine
|
|
* Sanctuary and Tropics, and apparently anything else with
|
|
* alpha test or pixel discard.
|
|
*
|
|
* According to the spec, bit 11 (RCCUNIT) must also be set,
|
|
* but we didn't debug actual testcases to find it out.
|
|
*
|
|
* According to the spec, bit 13 (RCZUNIT) must be set on IVB.
|
|
* This implements the WaDisableRCZUnitClockGating:ivb workaround.
|
|
*/
|
|
I915_WRITE(GEN6_UCGCTL2,
|
|
GEN6_RCZUNIT_CLOCK_GATE_DISABLE |
|
|
GEN6_RCCUNIT_CLOCK_GATE_DISABLE);
|
|
|
|
/* This is required by WaCatErrorRejectionIssue:ivb */
|
|
I915_WRITE(GEN7_SQ_CHICKEN_MBCUNIT_CONFIG,
|
|
I915_READ(GEN7_SQ_CHICKEN_MBCUNIT_CONFIG) |
|
|
GEN7_SQ_CHICKEN_MBCUNIT_SQINTMOB);
|
|
|
|
g4x_disable_trickle_feed(dev);
|
|
|
|
/* WaMbcDriverBootEnable:ivb */
|
|
I915_WRITE(GEN6_MBCTL, I915_READ(GEN6_MBCTL) |
|
|
GEN6_MBCTL_ENABLE_BOOT_FETCH);
|
|
|
|
/* WaVSRefCountFullforceMissDisable:ivb */
|
|
gen7_setup_fixed_func_scheduler(dev_priv);
|
|
|
|
/* WaDisable4x2SubspanOptimization:ivb */
|
|
I915_WRITE(CACHE_MODE_1,
|
|
_MASKED_BIT_ENABLE(PIXEL_SUBSPAN_COLLECT_OPT_DISABLE));
|
|
|
|
snpcr = I915_READ(GEN6_MBCUNIT_SNPCR);
|
|
snpcr &= ~GEN6_MBC_SNPCR_MASK;
|
|
snpcr |= GEN6_MBC_SNPCR_MED;
|
|
I915_WRITE(GEN6_MBCUNIT_SNPCR, snpcr);
|
|
|
|
if (!HAS_PCH_NOP(dev))
|
|
cpt_init_clock_gating(dev);
|
|
|
|
gen6_check_mch_setup(dev);
|
|
}
|
|
|
|
static void valleyview_init_clock_gating(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
|
|
I915_WRITE(DSPCLK_GATE_D, VRHUNIT_CLOCK_GATE_DISABLE);
|
|
|
|
/* WaDisableEarlyCull:vlv */
|
|
I915_WRITE(_3D_CHICKEN3,
|
|
_MASKED_BIT_ENABLE(_3D_CHICKEN_SF_DISABLE_OBJEND_CULL));
|
|
|
|
/* WaDisableBackToBackFlipFix:vlv */
|
|
I915_WRITE(IVB_CHICKEN3,
|
|
CHICKEN3_DGMG_REQ_OUT_FIX_DISABLE |
|
|
CHICKEN3_DGMG_DONE_FIX_DISABLE);
|
|
|
|
/* WaDisablePSDDualDispatchEnable:vlv */
|
|
I915_WRITE(GEN7_HALF_SLICE_CHICKEN1,
|
|
_MASKED_BIT_ENABLE(GEN7_MAX_PS_THREAD_DEP |
|
|
GEN7_PSD_SINGLE_PORT_DISPATCH_ENABLE));
|
|
|
|
/* Apply the WaDisableRHWOOptimizationForRenderHang:vlv workaround. */
|
|
I915_WRITE(GEN7_COMMON_SLICE_CHICKEN1,
|
|
GEN7_CSC1_RHWO_OPT_DISABLE_IN_RCC);
|
|
|
|
/* WaApplyL3ControlAndL3ChickenMode:vlv */
|
|
I915_WRITE(GEN7_L3CNTLREG1, I915_READ(GEN7_L3CNTLREG1) | GEN7_L3AGDIS);
|
|
I915_WRITE(GEN7_L3_CHICKEN_MODE_REGISTER, GEN7_WA_L3_CHICKEN_MODE);
|
|
|
|
/* WaForceL3Serialization:vlv */
|
|
I915_WRITE(GEN7_L3SQCREG4, I915_READ(GEN7_L3SQCREG4) &
|
|
~L3SQ_URB_READ_CAM_MATCH_DISABLE);
|
|
|
|
/* WaDisableDopClockGating:vlv */
|
|
I915_WRITE(GEN7_ROW_CHICKEN2,
|
|
_MASKED_BIT_ENABLE(DOP_CLOCK_GATING_DISABLE));
|
|
|
|
/* WaForceL3Serialization:vlv */
|
|
I915_WRITE(GEN7_L3SQCREG4, I915_READ(GEN7_L3SQCREG4) &
|
|
~L3SQ_URB_READ_CAM_MATCH_DISABLE);
|
|
|
|
/* This is required by WaCatErrorRejectionIssue:vlv */
|
|
I915_WRITE(GEN7_SQ_CHICKEN_MBCUNIT_CONFIG,
|
|
I915_READ(GEN7_SQ_CHICKEN_MBCUNIT_CONFIG) |
|
|
GEN7_SQ_CHICKEN_MBCUNIT_SQINTMOB);
|
|
|
|
/* WaMbcDriverBootEnable:vlv */
|
|
I915_WRITE(GEN6_MBCTL, I915_READ(GEN6_MBCTL) |
|
|
GEN6_MBCTL_ENABLE_BOOT_FETCH);
|
|
|
|
|
|
/* According to the BSpec vol1g, bit 12 (RCPBUNIT) clock
|
|
* gating disable must be set. Failure to set it results in
|
|
* flickering pixels due to Z write ordering failures after
|
|
* some amount of runtime in the Mesa "fire" demo, and Unigine
|
|
* Sanctuary and Tropics, and apparently anything else with
|
|
* alpha test or pixel discard.
|
|
*
|
|
* According to the spec, bit 11 (RCCUNIT) must also be set,
|
|
* but we didn't debug actual testcases to find it out.
|
|
*
|
|
* According to the spec, bit 13 (RCZUNIT) must be set on IVB.
|
|
* This implements the WaDisableRCZUnitClockGating:vlv workaround.
|
|
*
|
|
* Also apply WaDisableVDSUnitClockGating:vlv and
|
|
* WaDisableRCPBUnitClockGating:vlv.
|
|
*/
|
|
I915_WRITE(GEN6_UCGCTL2,
|
|
GEN7_VDSUNIT_CLOCK_GATE_DISABLE |
|
|
GEN7_TDLUNIT_CLOCK_GATE_DISABLE |
|
|
GEN6_RCZUNIT_CLOCK_GATE_DISABLE |
|
|
GEN6_RCPBUNIT_CLOCK_GATE_DISABLE |
|
|
GEN6_RCCUNIT_CLOCK_GATE_DISABLE);
|
|
|
|
I915_WRITE(GEN7_UCGCTL4, GEN7_L3BANK2X_CLOCK_GATE_DISABLE);
|
|
|
|
I915_WRITE(MI_ARB_VLV, MI_ARB_DISPLAY_TRICKLE_FEED_DISABLE);
|
|
|
|
I915_WRITE(CACHE_MODE_1,
|
|
_MASKED_BIT_ENABLE(PIXEL_SUBSPAN_COLLECT_OPT_DISABLE));
|
|
|
|
/*
|
|
* WaDisableVLVClockGating_VBIIssue:vlv
|
|
* Disable clock gating on th GCFG unit to prevent a delay
|
|
* in the reporting of vblank events.
|
|
*/
|
|
I915_WRITE(VLV_GUNIT_CLOCK_GATE, 0xffffffff);
|
|
|
|
/* Conservative clock gating settings for now */
|
|
I915_WRITE(0x9400, 0xffffffff);
|
|
I915_WRITE(0x9404, 0xffffffff);
|
|
I915_WRITE(0x9408, 0xffffffff);
|
|
I915_WRITE(0x940c, 0xffffffff);
|
|
I915_WRITE(0x9410, 0xffffffff);
|
|
I915_WRITE(0x9414, 0xffffffff);
|
|
I915_WRITE(0x9418, 0xffffffff);
|
|
}
|
|
|
|
static void g4x_init_clock_gating(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
uint32_t dspclk_gate;
|
|
|
|
I915_WRITE(RENCLK_GATE_D1, 0);
|
|
I915_WRITE(RENCLK_GATE_D2, VF_UNIT_CLOCK_GATE_DISABLE |
|
|
GS_UNIT_CLOCK_GATE_DISABLE |
|
|
CL_UNIT_CLOCK_GATE_DISABLE);
|
|
I915_WRITE(RAMCLK_GATE_D, 0);
|
|
dspclk_gate = VRHUNIT_CLOCK_GATE_DISABLE |
|
|
OVRUNIT_CLOCK_GATE_DISABLE |
|
|
OVCUNIT_CLOCK_GATE_DISABLE;
|
|
if (IS_GM45(dev))
|
|
dspclk_gate |= DSSUNIT_CLOCK_GATE_DISABLE;
|
|
I915_WRITE(DSPCLK_GATE_D, dspclk_gate);
|
|
|
|
/* WaDisableRenderCachePipelinedFlush */
|
|
I915_WRITE(CACHE_MODE_0,
|
|
_MASKED_BIT_ENABLE(CM0_PIPELINED_RENDER_FLUSH_DISABLE));
|
|
|
|
g4x_disable_trickle_feed(dev);
|
|
}
|
|
|
|
static void crestline_init_clock_gating(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
|
|
I915_WRITE(RENCLK_GATE_D1, I965_RCC_CLOCK_GATE_DISABLE);
|
|
I915_WRITE(RENCLK_GATE_D2, 0);
|
|
I915_WRITE(DSPCLK_GATE_D, 0);
|
|
I915_WRITE(RAMCLK_GATE_D, 0);
|
|
I915_WRITE16(DEUC, 0);
|
|
I915_WRITE(MI_ARB_STATE,
|
|
_MASKED_BIT_ENABLE(MI_ARB_DISPLAY_TRICKLE_FEED_DISABLE));
|
|
}
|
|
|
|
static void broadwater_init_clock_gating(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
|
|
I915_WRITE(RENCLK_GATE_D1, I965_RCZ_CLOCK_GATE_DISABLE |
|
|
I965_RCC_CLOCK_GATE_DISABLE |
|
|
I965_RCPB_CLOCK_GATE_DISABLE |
|
|
I965_ISC_CLOCK_GATE_DISABLE |
|
|
I965_FBC_CLOCK_GATE_DISABLE);
|
|
I915_WRITE(RENCLK_GATE_D2, 0);
|
|
I915_WRITE(MI_ARB_STATE,
|
|
_MASKED_BIT_ENABLE(MI_ARB_DISPLAY_TRICKLE_FEED_DISABLE));
|
|
}
|
|
|
|
static void gen3_init_clock_gating(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
u32 dstate = I915_READ(D_STATE);
|
|
|
|
dstate |= DSTATE_PLL_D3_OFF | DSTATE_GFX_CLOCK_GATING |
|
|
DSTATE_DOT_CLOCK_GATING;
|
|
I915_WRITE(D_STATE, dstate);
|
|
|
|
if (IS_PINEVIEW(dev))
|
|
I915_WRITE(ECOSKPD, _MASKED_BIT_ENABLE(ECO_GATING_CX_ONLY));
|
|
|
|
/* IIR "flip pending" means done if this bit is set */
|
|
I915_WRITE(ECOSKPD, _MASKED_BIT_DISABLE(ECO_FLIP_DONE));
|
|
}
|
|
|
|
static void i85x_init_clock_gating(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
|
|
I915_WRITE(RENCLK_GATE_D1, SV_CLOCK_GATE_DISABLE);
|
|
}
|
|
|
|
static void i830_init_clock_gating(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
|
|
I915_WRITE(DSPCLK_GATE_D, OVRUNIT_CLOCK_GATE_DISABLE);
|
|
}
|
|
|
|
void intel_init_clock_gating(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
|
|
dev_priv->display.init_clock_gating(dev);
|
|
}
|
|
|
|
void intel_suspend_hw(struct drm_device *dev)
|
|
{
|
|
if (HAS_PCH_LPT(dev))
|
|
lpt_suspend_hw(dev);
|
|
}
|
|
|
|
/**
|
|
* We should only use the power well if we explicitly asked the hardware to
|
|
* enable it, so check if it's enabled and also check if we've requested it to
|
|
* be enabled.
|
|
*/
|
|
bool intel_display_power_enabled(struct drm_device *dev,
|
|
enum intel_display_power_domain domain)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
|
|
if (!HAS_POWER_WELL(dev))
|
|
return true;
|
|
|
|
switch (domain) {
|
|
case POWER_DOMAIN_PIPE_A:
|
|
case POWER_DOMAIN_TRANSCODER_EDP:
|
|
return true;
|
|
case POWER_DOMAIN_PIPE_B:
|
|
case POWER_DOMAIN_PIPE_C:
|
|
case POWER_DOMAIN_PIPE_A_PANEL_FITTER:
|
|
case POWER_DOMAIN_PIPE_B_PANEL_FITTER:
|
|
case POWER_DOMAIN_PIPE_C_PANEL_FITTER:
|
|
case POWER_DOMAIN_TRANSCODER_A:
|
|
case POWER_DOMAIN_TRANSCODER_B:
|
|
case POWER_DOMAIN_TRANSCODER_C:
|
|
return I915_READ(HSW_PWR_WELL_DRIVER) ==
|
|
(HSW_PWR_WELL_ENABLE | HSW_PWR_WELL_STATE);
|
|
default:
|
|
BUG();
|
|
}
|
|
}
|
|
|
|
static void __intel_set_power_well(struct drm_device *dev, bool enable)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
bool is_enabled, enable_requested;
|
|
uint32_t tmp;
|
|
|
|
tmp = I915_READ(HSW_PWR_WELL_DRIVER);
|
|
is_enabled = tmp & HSW_PWR_WELL_STATE;
|
|
enable_requested = tmp & HSW_PWR_WELL_ENABLE;
|
|
|
|
if (enable) {
|
|
if (!enable_requested)
|
|
I915_WRITE(HSW_PWR_WELL_DRIVER, HSW_PWR_WELL_ENABLE);
|
|
|
|
if (!is_enabled) {
|
|
DRM_DEBUG_KMS("Enabling power well\n");
|
|
if (wait_for((I915_READ(HSW_PWR_WELL_DRIVER) &
|
|
HSW_PWR_WELL_STATE), 20))
|
|
DRM_ERROR("Timeout enabling power well\n");
|
|
}
|
|
} else {
|
|
if (enable_requested) {
|
|
I915_WRITE(HSW_PWR_WELL_DRIVER, 0);
|
|
DRM_DEBUG_KMS("Requesting to disable the power well\n");
|
|
}
|
|
}
|
|
}
|
|
|
|
static struct i915_power_well *hsw_pwr;
|
|
|
|
/* Display audio driver power well request */
|
|
void i915_request_power_well(void)
|
|
{
|
|
if (WARN_ON(!hsw_pwr))
|
|
return;
|
|
|
|
spin_lock_irq(&hsw_pwr->lock);
|
|
if (!hsw_pwr->count++ &&
|
|
!hsw_pwr->i915_request)
|
|
__intel_set_power_well(hsw_pwr->device, true);
|
|
spin_unlock_irq(&hsw_pwr->lock);
|
|
}
|
|
EXPORT_SYMBOL_GPL(i915_request_power_well);
|
|
|
|
/* Display audio driver power well release */
|
|
void i915_release_power_well(void)
|
|
{
|
|
if (WARN_ON(!hsw_pwr))
|
|
return;
|
|
|
|
spin_lock_irq(&hsw_pwr->lock);
|
|
WARN_ON(!hsw_pwr->count);
|
|
if (!--hsw_pwr->count &&
|
|
!hsw_pwr->i915_request)
|
|
__intel_set_power_well(hsw_pwr->device, false);
|
|
spin_unlock_irq(&hsw_pwr->lock);
|
|
}
|
|
EXPORT_SYMBOL_GPL(i915_release_power_well);
|
|
|
|
int i915_init_power_well(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
|
|
hsw_pwr = &dev_priv->power_well;
|
|
|
|
hsw_pwr->device = dev;
|
|
spin_lock_init(&hsw_pwr->lock);
|
|
hsw_pwr->count = 0;
|
|
|
|
return 0;
|
|
}
|
|
|
|
void i915_remove_power_well(struct drm_device *dev)
|
|
{
|
|
hsw_pwr = NULL;
|
|
}
|
|
|
|
void intel_set_power_well(struct drm_device *dev, bool enable)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
struct i915_power_well *power_well = &dev_priv->power_well;
|
|
|
|
if (!HAS_POWER_WELL(dev))
|
|
return;
|
|
|
|
if (!i915_disable_power_well && !enable)
|
|
return;
|
|
|
|
spin_lock_irq(&power_well->lock);
|
|
power_well->i915_request = enable;
|
|
|
|
/* only reject "disable" power well request */
|
|
if (power_well->count && !enable) {
|
|
spin_unlock_irq(&power_well->lock);
|
|
return;
|
|
}
|
|
|
|
__intel_set_power_well(dev, enable);
|
|
spin_unlock_irq(&power_well->lock);
|
|
}
|
|
|
|
/*
|
|
* Starting with Haswell, we have a "Power Down Well" that can be turned off
|
|
* when not needed anymore. We have 4 registers that can request the power well
|
|
* to be enabled, and it will only be disabled if none of the registers is
|
|
* requesting it to be enabled.
|
|
*/
|
|
void intel_init_power_well(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
|
|
if (!HAS_POWER_WELL(dev))
|
|
return;
|
|
|
|
/* For now, we need the power well to be always enabled. */
|
|
intel_set_power_well(dev, true);
|
|
|
|
/* We're taking over the BIOS, so clear any requests made by it since
|
|
* the driver is in charge now. */
|
|
if (I915_READ(HSW_PWR_WELL_BIOS) & HSW_PWR_WELL_ENABLE)
|
|
I915_WRITE(HSW_PWR_WELL_BIOS, 0);
|
|
}
|
|
|
|
/* Set up chip specific power management-related functions */
|
|
void intel_init_pm(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
|
|
if (I915_HAS_FBC(dev)) {
|
|
if (HAS_PCH_SPLIT(dev)) {
|
|
dev_priv->display.fbc_enabled = ironlake_fbc_enabled;
|
|
if (IS_IVYBRIDGE(dev) || IS_HASWELL(dev))
|
|
dev_priv->display.enable_fbc =
|
|
gen7_enable_fbc;
|
|
else
|
|
dev_priv->display.enable_fbc =
|
|
ironlake_enable_fbc;
|
|
dev_priv->display.disable_fbc = ironlake_disable_fbc;
|
|
} else if (IS_GM45(dev)) {
|
|
dev_priv->display.fbc_enabled = g4x_fbc_enabled;
|
|
dev_priv->display.enable_fbc = g4x_enable_fbc;
|
|
dev_priv->display.disable_fbc = g4x_disable_fbc;
|
|
} else if (IS_CRESTLINE(dev)) {
|
|
dev_priv->display.fbc_enabled = i8xx_fbc_enabled;
|
|
dev_priv->display.enable_fbc = i8xx_enable_fbc;
|
|
dev_priv->display.disable_fbc = i8xx_disable_fbc;
|
|
}
|
|
/* 855GM needs testing */
|
|
}
|
|
|
|
/* For cxsr */
|
|
if (IS_PINEVIEW(dev))
|
|
i915_pineview_get_mem_freq(dev);
|
|
else if (IS_GEN5(dev))
|
|
i915_ironlake_get_mem_freq(dev);
|
|
|
|
/* For FIFO watermark updates */
|
|
if (HAS_PCH_SPLIT(dev)) {
|
|
if (IS_GEN5(dev)) {
|
|
if (I915_READ(MLTR_ILK) & ILK_SRLT_MASK)
|
|
dev_priv->display.update_wm = ironlake_update_wm;
|
|
else {
|
|
DRM_DEBUG_KMS("Failed to get proper latency. "
|
|
"Disable CxSR\n");
|
|
dev_priv->display.update_wm = NULL;
|
|
}
|
|
dev_priv->display.init_clock_gating = ironlake_init_clock_gating;
|
|
} else if (IS_GEN6(dev)) {
|
|
if (SNB_READ_WM0_LATENCY()) {
|
|
dev_priv->display.update_wm = sandybridge_update_wm;
|
|
dev_priv->display.update_sprite_wm = sandybridge_update_sprite_wm;
|
|
} else {
|
|
DRM_DEBUG_KMS("Failed to read display plane latency. "
|
|
"Disable CxSR\n");
|
|
dev_priv->display.update_wm = NULL;
|
|
}
|
|
dev_priv->display.init_clock_gating = gen6_init_clock_gating;
|
|
} else if (IS_IVYBRIDGE(dev)) {
|
|
if (SNB_READ_WM0_LATENCY()) {
|
|
dev_priv->display.update_wm = ivybridge_update_wm;
|
|
dev_priv->display.update_sprite_wm = sandybridge_update_sprite_wm;
|
|
} else {
|
|
DRM_DEBUG_KMS("Failed to read display plane latency. "
|
|
"Disable CxSR\n");
|
|
dev_priv->display.update_wm = NULL;
|
|
}
|
|
dev_priv->display.init_clock_gating = ivybridge_init_clock_gating;
|
|
} else if (IS_HASWELL(dev)) {
|
|
if (I915_READ64(MCH_SSKPD)) {
|
|
dev_priv->display.update_wm = haswell_update_wm;
|
|
dev_priv->display.update_sprite_wm =
|
|
haswell_update_sprite_wm;
|
|
} else {
|
|
DRM_DEBUG_KMS("Failed to read display plane latency. "
|
|
"Disable CxSR\n");
|
|
dev_priv->display.update_wm = NULL;
|
|
}
|
|
dev_priv->display.init_clock_gating = haswell_init_clock_gating;
|
|
} else
|
|
dev_priv->display.update_wm = NULL;
|
|
} else if (IS_VALLEYVIEW(dev)) {
|
|
dev_priv->display.update_wm = valleyview_update_wm;
|
|
dev_priv->display.init_clock_gating =
|
|
valleyview_init_clock_gating;
|
|
} else if (IS_PINEVIEW(dev)) {
|
|
if (!intel_get_cxsr_latency(IS_PINEVIEW_G(dev),
|
|
dev_priv->is_ddr3,
|
|
dev_priv->fsb_freq,
|
|
dev_priv->mem_freq)) {
|
|
DRM_INFO("failed to find known CxSR latency "
|
|
"(found ddr%s fsb freq %d, mem freq %d), "
|
|
"disabling CxSR\n",
|
|
(dev_priv->is_ddr3 == 1) ? "3" : "2",
|
|
dev_priv->fsb_freq, dev_priv->mem_freq);
|
|
/* Disable CxSR and never update its watermark again */
|
|
pineview_disable_cxsr(dev);
|
|
dev_priv->display.update_wm = NULL;
|
|
} else
|
|
dev_priv->display.update_wm = pineview_update_wm;
|
|
dev_priv->display.init_clock_gating = gen3_init_clock_gating;
|
|
} else if (IS_G4X(dev)) {
|
|
dev_priv->display.update_wm = g4x_update_wm;
|
|
dev_priv->display.init_clock_gating = g4x_init_clock_gating;
|
|
} else if (IS_GEN4(dev)) {
|
|
dev_priv->display.update_wm = i965_update_wm;
|
|
if (IS_CRESTLINE(dev))
|
|
dev_priv->display.init_clock_gating = crestline_init_clock_gating;
|
|
else if (IS_BROADWATER(dev))
|
|
dev_priv->display.init_clock_gating = broadwater_init_clock_gating;
|
|
} else if (IS_GEN3(dev)) {
|
|
dev_priv->display.update_wm = i9xx_update_wm;
|
|
dev_priv->display.get_fifo_size = i9xx_get_fifo_size;
|
|
dev_priv->display.init_clock_gating = gen3_init_clock_gating;
|
|
} else if (IS_I865G(dev)) {
|
|
dev_priv->display.update_wm = i830_update_wm;
|
|
dev_priv->display.init_clock_gating = i85x_init_clock_gating;
|
|
dev_priv->display.get_fifo_size = i830_get_fifo_size;
|
|
} else if (IS_I85X(dev)) {
|
|
dev_priv->display.update_wm = i9xx_update_wm;
|
|
dev_priv->display.get_fifo_size = i85x_get_fifo_size;
|
|
dev_priv->display.init_clock_gating = i85x_init_clock_gating;
|
|
} else {
|
|
dev_priv->display.update_wm = i830_update_wm;
|
|
dev_priv->display.init_clock_gating = i830_init_clock_gating;
|
|
if (IS_845G(dev))
|
|
dev_priv->display.get_fifo_size = i845_get_fifo_size;
|
|
else
|
|
dev_priv->display.get_fifo_size = i830_get_fifo_size;
|
|
}
|
|
}
|
|
|
|
static void __gen6_gt_wait_for_thread_c0(struct drm_i915_private *dev_priv)
|
|
{
|
|
u32 gt_thread_status_mask;
|
|
|
|
if (IS_HASWELL(dev_priv->dev))
|
|
gt_thread_status_mask = GEN6_GT_THREAD_STATUS_CORE_MASK_HSW;
|
|
else
|
|
gt_thread_status_mask = GEN6_GT_THREAD_STATUS_CORE_MASK;
|
|
|
|
/* w/a for a sporadic read returning 0 by waiting for the GT
|
|
* thread to wake up.
|
|
*/
|
|
if (wait_for_atomic_us((I915_READ_NOTRACE(GEN6_GT_THREAD_STATUS_REG) & gt_thread_status_mask) == 0, 500))
|
|
DRM_ERROR("GT thread status wait timed out\n");
|
|
}
|
|
|
|
static void __gen6_gt_force_wake_reset(struct drm_i915_private *dev_priv)
|
|
{
|
|
I915_WRITE_NOTRACE(FORCEWAKE, 0);
|
|
POSTING_READ(ECOBUS); /* something from same cacheline, but !FORCEWAKE */
|
|
}
|
|
|
|
static void __gen6_gt_force_wake_get(struct drm_i915_private *dev_priv)
|
|
{
|
|
if (wait_for_atomic((I915_READ_NOTRACE(FORCEWAKE_ACK) & 1) == 0,
|
|
FORCEWAKE_ACK_TIMEOUT_MS))
|
|
DRM_ERROR("Timed out waiting for forcewake old ack to clear.\n");
|
|
|
|
I915_WRITE_NOTRACE(FORCEWAKE, 1);
|
|
POSTING_READ(ECOBUS); /* something from same cacheline, but !FORCEWAKE */
|
|
|
|
if (wait_for_atomic((I915_READ_NOTRACE(FORCEWAKE_ACK) & 1),
|
|
FORCEWAKE_ACK_TIMEOUT_MS))
|
|
DRM_ERROR("Timed out waiting for forcewake to ack request.\n");
|
|
|
|
/* WaRsForcewakeWaitTC0:snb */
|
|
__gen6_gt_wait_for_thread_c0(dev_priv);
|
|
}
|
|
|
|
static void __gen6_gt_force_wake_mt_reset(struct drm_i915_private *dev_priv)
|
|
{
|
|
I915_WRITE_NOTRACE(FORCEWAKE_MT, _MASKED_BIT_DISABLE(0xffff));
|
|
/* something from same cacheline, but !FORCEWAKE_MT */
|
|
POSTING_READ(ECOBUS);
|
|
}
|
|
|
|
static void __gen6_gt_force_wake_mt_get(struct drm_i915_private *dev_priv)
|
|
{
|
|
u32 forcewake_ack;
|
|
|
|
if (IS_HASWELL(dev_priv->dev))
|
|
forcewake_ack = FORCEWAKE_ACK_HSW;
|
|
else
|
|
forcewake_ack = FORCEWAKE_MT_ACK;
|
|
|
|
if (wait_for_atomic((I915_READ_NOTRACE(forcewake_ack) & FORCEWAKE_KERNEL) == 0,
|
|
FORCEWAKE_ACK_TIMEOUT_MS))
|
|
DRM_ERROR("Timed out waiting for forcewake old ack to clear.\n");
|
|
|
|
I915_WRITE_NOTRACE(FORCEWAKE_MT, _MASKED_BIT_ENABLE(FORCEWAKE_KERNEL));
|
|
/* something from same cacheline, but !FORCEWAKE_MT */
|
|
POSTING_READ(ECOBUS);
|
|
|
|
if (wait_for_atomic((I915_READ_NOTRACE(forcewake_ack) & FORCEWAKE_KERNEL),
|
|
FORCEWAKE_ACK_TIMEOUT_MS))
|
|
DRM_ERROR("Timed out waiting for forcewake to ack request.\n");
|
|
|
|
/* WaRsForcewakeWaitTC0:ivb,hsw */
|
|
__gen6_gt_wait_for_thread_c0(dev_priv);
|
|
}
|
|
|
|
/*
|
|
* Generally this is called implicitly by the register read function. However,
|
|
* if some sequence requires the GT to not power down then this function should
|
|
* be called at the beginning of the sequence followed by a call to
|
|
* gen6_gt_force_wake_put() at the end of the sequence.
|
|
*/
|
|
void gen6_gt_force_wake_get(struct drm_i915_private *dev_priv)
|
|
{
|
|
unsigned long irqflags;
|
|
|
|
spin_lock_irqsave(&dev_priv->gt_lock, irqflags);
|
|
if (dev_priv->forcewake_count++ == 0)
|
|
dev_priv->gt.force_wake_get(dev_priv);
|
|
spin_unlock_irqrestore(&dev_priv->gt_lock, irqflags);
|
|
}
|
|
|
|
void gen6_gt_check_fifodbg(struct drm_i915_private *dev_priv)
|
|
{
|
|
u32 gtfifodbg;
|
|
gtfifodbg = I915_READ_NOTRACE(GTFIFODBG);
|
|
if (WARN(gtfifodbg & GT_FIFO_CPU_ERROR_MASK,
|
|
"MMIO read or write has been dropped %x\n", gtfifodbg))
|
|
I915_WRITE_NOTRACE(GTFIFODBG, GT_FIFO_CPU_ERROR_MASK);
|
|
}
|
|
|
|
static void __gen6_gt_force_wake_put(struct drm_i915_private *dev_priv)
|
|
{
|
|
I915_WRITE_NOTRACE(FORCEWAKE, 0);
|
|
/* something from same cacheline, but !FORCEWAKE */
|
|
POSTING_READ(ECOBUS);
|
|
gen6_gt_check_fifodbg(dev_priv);
|
|
}
|
|
|
|
static void __gen6_gt_force_wake_mt_put(struct drm_i915_private *dev_priv)
|
|
{
|
|
I915_WRITE_NOTRACE(FORCEWAKE_MT, _MASKED_BIT_DISABLE(FORCEWAKE_KERNEL));
|
|
/* something from same cacheline, but !FORCEWAKE_MT */
|
|
POSTING_READ(ECOBUS);
|
|
gen6_gt_check_fifodbg(dev_priv);
|
|
}
|
|
|
|
/*
|
|
* see gen6_gt_force_wake_get()
|
|
*/
|
|
void gen6_gt_force_wake_put(struct drm_i915_private *dev_priv)
|
|
{
|
|
unsigned long irqflags;
|
|
|
|
spin_lock_irqsave(&dev_priv->gt_lock, irqflags);
|
|
if (--dev_priv->forcewake_count == 0)
|
|
dev_priv->gt.force_wake_put(dev_priv);
|
|
spin_unlock_irqrestore(&dev_priv->gt_lock, irqflags);
|
|
}
|
|
|
|
int __gen6_gt_wait_for_fifo(struct drm_i915_private *dev_priv)
|
|
{
|
|
int ret = 0;
|
|
|
|
if (dev_priv->gt_fifo_count < GT_FIFO_NUM_RESERVED_ENTRIES) {
|
|
int loop = 500;
|
|
u32 fifo = I915_READ_NOTRACE(GT_FIFO_FREE_ENTRIES);
|
|
while (fifo <= GT_FIFO_NUM_RESERVED_ENTRIES && loop--) {
|
|
udelay(10);
|
|
fifo = I915_READ_NOTRACE(GT_FIFO_FREE_ENTRIES);
|
|
}
|
|
if (WARN_ON(loop < 0 && fifo <= GT_FIFO_NUM_RESERVED_ENTRIES))
|
|
++ret;
|
|
dev_priv->gt_fifo_count = fifo;
|
|
}
|
|
dev_priv->gt_fifo_count--;
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void vlv_force_wake_reset(struct drm_i915_private *dev_priv)
|
|
{
|
|
I915_WRITE_NOTRACE(FORCEWAKE_VLV, _MASKED_BIT_DISABLE(0xffff));
|
|
/* something from same cacheline, but !FORCEWAKE_VLV */
|
|
POSTING_READ(FORCEWAKE_ACK_VLV);
|
|
}
|
|
|
|
static void vlv_force_wake_get(struct drm_i915_private *dev_priv)
|
|
{
|
|
if (wait_for_atomic((I915_READ_NOTRACE(FORCEWAKE_ACK_VLV) & FORCEWAKE_KERNEL) == 0,
|
|
FORCEWAKE_ACK_TIMEOUT_MS))
|
|
DRM_ERROR("Timed out waiting for forcewake old ack to clear.\n");
|
|
|
|
I915_WRITE_NOTRACE(FORCEWAKE_VLV, _MASKED_BIT_ENABLE(FORCEWAKE_KERNEL));
|
|
I915_WRITE_NOTRACE(FORCEWAKE_MEDIA_VLV,
|
|
_MASKED_BIT_ENABLE(FORCEWAKE_KERNEL));
|
|
|
|
if (wait_for_atomic((I915_READ_NOTRACE(FORCEWAKE_ACK_VLV) & FORCEWAKE_KERNEL),
|
|
FORCEWAKE_ACK_TIMEOUT_MS))
|
|
DRM_ERROR("Timed out waiting for GT to ack forcewake request.\n");
|
|
|
|
if (wait_for_atomic((I915_READ_NOTRACE(FORCEWAKE_ACK_MEDIA_VLV) &
|
|
FORCEWAKE_KERNEL),
|
|
FORCEWAKE_ACK_TIMEOUT_MS))
|
|
DRM_ERROR("Timed out waiting for media to ack forcewake request.\n");
|
|
|
|
/* WaRsForcewakeWaitTC0:vlv */
|
|
__gen6_gt_wait_for_thread_c0(dev_priv);
|
|
}
|
|
|
|
static void vlv_force_wake_put(struct drm_i915_private *dev_priv)
|
|
{
|
|
I915_WRITE_NOTRACE(FORCEWAKE_VLV, _MASKED_BIT_DISABLE(FORCEWAKE_KERNEL));
|
|
I915_WRITE_NOTRACE(FORCEWAKE_MEDIA_VLV,
|
|
_MASKED_BIT_DISABLE(FORCEWAKE_KERNEL));
|
|
/* The below doubles as a POSTING_READ */
|
|
gen6_gt_check_fifodbg(dev_priv);
|
|
}
|
|
|
|
void intel_gt_reset(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
|
|
if (IS_VALLEYVIEW(dev)) {
|
|
vlv_force_wake_reset(dev_priv);
|
|
} else if (INTEL_INFO(dev)->gen >= 6) {
|
|
__gen6_gt_force_wake_reset(dev_priv);
|
|
if (IS_IVYBRIDGE(dev) || IS_HASWELL(dev))
|
|
__gen6_gt_force_wake_mt_reset(dev_priv);
|
|
}
|
|
}
|
|
|
|
void intel_gt_init(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
|
|
spin_lock_init(&dev_priv->gt_lock);
|
|
|
|
intel_gt_reset(dev);
|
|
|
|
if (IS_VALLEYVIEW(dev)) {
|
|
dev_priv->gt.force_wake_get = vlv_force_wake_get;
|
|
dev_priv->gt.force_wake_put = vlv_force_wake_put;
|
|
} else if (IS_IVYBRIDGE(dev) || IS_HASWELL(dev)) {
|
|
dev_priv->gt.force_wake_get = __gen6_gt_force_wake_mt_get;
|
|
dev_priv->gt.force_wake_put = __gen6_gt_force_wake_mt_put;
|
|
} else if (IS_GEN6(dev)) {
|
|
dev_priv->gt.force_wake_get = __gen6_gt_force_wake_get;
|
|
dev_priv->gt.force_wake_put = __gen6_gt_force_wake_put;
|
|
}
|
|
INIT_DELAYED_WORK(&dev_priv->rps.delayed_resume_work,
|
|
intel_gen6_powersave_work);
|
|
}
|
|
|
|
int sandybridge_pcode_read(struct drm_i915_private *dev_priv, u8 mbox, u32 *val)
|
|
{
|
|
WARN_ON(!mutex_is_locked(&dev_priv->rps.hw_lock));
|
|
|
|
if (I915_READ(GEN6_PCODE_MAILBOX) & GEN6_PCODE_READY) {
|
|
DRM_DEBUG_DRIVER("warning: pcode (read) mailbox access failed\n");
|
|
return -EAGAIN;
|
|
}
|
|
|
|
I915_WRITE(GEN6_PCODE_DATA, *val);
|
|
I915_WRITE(GEN6_PCODE_MAILBOX, GEN6_PCODE_READY | mbox);
|
|
|
|
if (wait_for((I915_READ(GEN6_PCODE_MAILBOX) & GEN6_PCODE_READY) == 0,
|
|
500)) {
|
|
DRM_ERROR("timeout waiting for pcode read (%d) to finish\n", mbox);
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
*val = I915_READ(GEN6_PCODE_DATA);
|
|
I915_WRITE(GEN6_PCODE_DATA, 0);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int sandybridge_pcode_write(struct drm_i915_private *dev_priv, u8 mbox, u32 val)
|
|
{
|
|
WARN_ON(!mutex_is_locked(&dev_priv->rps.hw_lock));
|
|
|
|
if (I915_READ(GEN6_PCODE_MAILBOX) & GEN6_PCODE_READY) {
|
|
DRM_DEBUG_DRIVER("warning: pcode (write) mailbox access failed\n");
|
|
return -EAGAIN;
|
|
}
|
|
|
|
I915_WRITE(GEN6_PCODE_DATA, val);
|
|
I915_WRITE(GEN6_PCODE_MAILBOX, GEN6_PCODE_READY | mbox);
|
|
|
|
if (wait_for((I915_READ(GEN6_PCODE_MAILBOX) & GEN6_PCODE_READY) == 0,
|
|
500)) {
|
|
DRM_ERROR("timeout waiting for pcode write (%d) to finish\n", mbox);
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
I915_WRITE(GEN6_PCODE_DATA, 0);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int vlv_gpu_freq(int ddr_freq, int val)
|
|
{
|
|
int mult, base;
|
|
|
|
switch (ddr_freq) {
|
|
case 800:
|
|
mult = 20;
|
|
base = 120;
|
|
break;
|
|
case 1066:
|
|
mult = 22;
|
|
base = 133;
|
|
break;
|
|
case 1333:
|
|
mult = 21;
|
|
base = 125;
|
|
break;
|
|
default:
|
|
return -1;
|
|
}
|
|
|
|
return ((val - 0xbd) * mult) + base;
|
|
}
|
|
|
|
int vlv_freq_opcode(int ddr_freq, int val)
|
|
{
|
|
int mult, base;
|
|
|
|
switch (ddr_freq) {
|
|
case 800:
|
|
mult = 20;
|
|
base = 120;
|
|
break;
|
|
case 1066:
|
|
mult = 22;
|
|
base = 133;
|
|
break;
|
|
case 1333:
|
|
mult = 21;
|
|
base = 125;
|
|
break;
|
|
default:
|
|
return -1;
|
|
}
|
|
|
|
val /= mult;
|
|
val -= base / mult;
|
|
val += 0xbd;
|
|
|
|
if (val > 0xea)
|
|
val = 0xea;
|
|
|
|
return val;
|
|
}
|
|
|