linux/arch/arm/mach-pxa/include/mach
Anton Vorontsov bc2fd1c09c [ARM] pxa: add basic support for HP iPAQ h5000
This patch adds HP iPAQ h5000's (h5400, h5500) basic definitions.

Kernel will able to boot, work via serial console, mount filesystems
placed on flashes and run USB gadgets (g_ether by default).

Other device drivers (frame buffer, LCD, touchscreen, backlight,
bluetooth, w1/battery, ...) are depend on SAMCOP and MediaQ
SoCs/MFDs, drivers to which will be submitted too, after massive
cleanups.

This machine will be used as "real user" for these new drivers.

This is an updated version of the patch, which contains fixes proposed on
linux-arm-kernel mailing list.

Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
Signed-off-by: Milan Plzik <milan.plzik@gmail.com>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
2008-12-02 14:43:50 +08:00
..
audio.h
bitfield.h
camera.h V4L/DVB (8687): soc-camera: Move .power and .reset from soc_camera host to sensor driver 2008-10-12 09:36:50 -02:00
colibri.h
corgi.h Revert "[ARM] pxa/corgi: remove now unused corgi_ssp.c and corgi_lcd.c" 2008-10-21 09:42:29 +08:00
debug-macro.S
dma.h
entry-macro.S [ARM] 5233/1: Allow PXA to have ISA IRQs numbered 0-15 2008-09-01 17:13:26 +01:00
eseries-gpio.h
eseries-irq.h
gpio.h
gumstix.h
h5000.h [ARM] pxa: add basic support for HP iPAQ h5000 2008-12-02 14:43:50 +08:00
hardware.h [ARM] pxa: introduced cpu_is_pxa935() and cpu_is_pxa9xx() 2008-12-02 14:42:40 +08:00
i2c.h [ARM] 5278/1: i2c-pxa fast mode support 2008-10-03 15:57:06 +01:00
idp.h
io.h
irda.h
irqs.h [ARM] pxa: fix redefinition of NR_IRQS 2008-10-17 13:19:08 +01:00
littleton.h [ARM] pxa/littleton: add support for SPI-based TDO24M LCD panel driver 2008-09-23 22:04:38 +01:00
lpd270.h
lubbock.h
magician.h
mainstone.h
memory.h [ARM] 5280/1: pxa: prepare cm-x2xx.c and cm-x2xx-pci.[ch] for addition of CM-X255 2008-10-07 12:05:05 +01:00
mfp-pxa2xx.h
mfp-pxa3xx.h
mfp-pxa25x.h [ARM] pxa: add support for additional GPIOs on PXA26x 2008-12-02 14:42:37 +08:00
mfp-pxa27x.h [ARM] pxa: add missing GPIOs definitions 2008-12-02 14:42:41 +08:00
mfp-pxa300.h
mfp-pxa320.h [ARM] pxa: fix incorrect definitions of SSP3 on pxa320 2008-08-26 17:02:00 +01:00
mfp-pxa930.h
mfp.h [ARM] pxa: better MFP low power state support for pxa25x/pxa27x 2008-09-26 23:43:20 +01:00
mioa701.h [ARM] pxa/MioA701: discovered new gpio definitions. 2008-12-02 14:43:48 +08:00
mmc.h
mtd-xip.h [ARM] 5191/1: ARM: remove CVS keywords 2008-08-16 20:01:18 +01:00
ohci.h [ARM] ohci-pxa27x: introduce flags to avoid direct access to OHCI registers 2008-10-07 19:12:57 +01:00
palmtx.h
palmz72.h [ARM] 5239/1: Palm Zire 72 power management support 2008-10-09 15:12:07 +01:00
pcm027.h
pcm990_baseboard.h
pm.h [ARM] pxa: Allow platforms to override PSPR setting 2008-09-09 16:32:52 +01:00
poodle.h [ARM] pxa/poodle: prepare scoop for the generic GPIO API 2008-09-23 22:04:38 +01:00
pxa2xx_spi.h
pxa2xx-gpio.h [ARM] pxa: removed unused declarations of pxa_gpio_* in hardware.h 2008-12-02 14:42:37 +08:00
pxa2xx-regs.h [ARM] pxa: cpufreq-pxa2xx: sdram_rows detection support 2008-12-02 14:43:47 +08:00
pxa3xx_nand.h [MTD] [NAND] pxa3xx_nand: moved some helper variables out from platform data 2008-09-01 21:38:34 +01:00
pxa3xx-regs.h [ARM] pxa: add missing ACCR bit definitions to pxa3xx-regs.h 2008-10-07 19:12:59 +01:00
pxa25x-udc.h
pxa27x_keypad.h
pxa27x-udc.h
pxa-regs.h [ARM] pxa: include <mach/hardware.h> in pxa-regs.h 2008-12-02 14:42:39 +08:00
pxafb.h pxafb: introduce LCD_TYPE_MASK and use it. 2008-11-11 21:45:57 +08:00
regs-ac97.h [ARM] pxa: move AC97 register definitions into dedicated regs-ac97.h 2008-12-02 14:42:39 +08:00
regs-lcd.h
regs-ssp.h
regs-uart.h [ARM] pxa: move UART register definitions into dedicated regs-uart.h 2008-12-02 14:42:38 +08:00
reset.h [ARM] 5300/1: fixup spitz reset during boot 2008-10-11 09:52:38 +01:00
sharpsl.h [ARM] corgi_lcd: fix simultaneous compilation with corgi_bl 2008-10-29 11:45:37 +08:00
spitz.h [ARM] pxa/spitz: fix unbalance parenthesis in header file spitz.h 2008-10-21 22:45:57 +08:00
ssp.h [ARM] 5224/2: PXA SSP: Introduce register accessors 2008-09-09 16:32:52 +01:00
system.h
timex.h
tosa_bt.h
tosa.h backlight: add support for Sharp SL-6000 LCD and backlight drivers 2008-10-21 00:19:49 +01:00
trizeps4.h [ARM] 5204/1: Trizeps4 SOM update 2008-10-01 22:33:11 +01:00
udc.h
uncompress.h [ARM] pxa: move UART register definitions into dedicated regs-uart.h 2008-12-02 14:42:38 +08:00
viper.h Basic support for the Arcom/Eurotech Viper SBC. 2008-09-09 17:41:46 +02:00
vmalloc.h
zylonite.h misc: replace remaining __FUNCTION__ with __func__ 2008-10-20 16:17:42 -07:00