Grygorii Strashko c1a8d0a3ac net: phy: micrel: ksz9031: reconfigure autoneg after phy autoneg workaround ... Under some circumstances driver will perform PHY reset in ksz9031_read_status() to fix autoneg failure case (idle error count = 0xFF). When this happens ksz9031 will not detect link status change any more when connecting to Netgear 1G switch (link can be recovered sometimes by restarting netdevice "ifconfig down up"). Reproduced with TI am572x board equipped with ksz9031 PHY while connecting to Netgear 1G switch. Fix the issue by reconfiguring autonegotiation after PHY reset in ksz9031_read_status(). Fixes: d2fd719bcb ("net/phy: micrel: Add workaround for bad autoneg") Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>		2017-12-26 12:26:43 -05:00
..
amd.c
aquantia.c
at803x.c	net: phy: fix resume handling	2017-12-13 15:00:10 -05:00
bcm7xxx.c	net: phy: bcm7xxx: make array bcm7xxx_suspend_cfg static, reduces object code size	2017-09-01 18:30:50 -07:00
bcm63xx.c
bcm87xx.c
bcm-cygnus.c
bcm-phy-lib.c
bcm-phy-lib.h
broadcom.c	net: phy: broadcom: support new device flag for setting master mode	2017-10-12 22:59:38 -07:00
cicada.c
cortina.c	net: phy: cortina: add missing MODULE_DESCRIPTION/AUTHOR/LICENSE	2017-11-24 01:23:49 +09:00
davicom.c
dp83640_reg.h	License cleanup: add SPDX GPL-2.0 license identifier to files with no license	2017-11-02 11:10:55 +01:00
dp83640.c	dp83640: don't hold spinlock while calling netif_rx_ni	2017-08-30 14:50:11 -07:00
dp83822.c	net: phy: DP83822 initial driver submission	2017-10-11 14:14:32 -07:00
dp83848.c	net: phy: DP83822 initial driver submission	2017-10-11 14:14:32 -07:00
dp83867.c	net: phy: dp83867: add workaround for incorrect RX_CTRL pin strap	2017-07-05 09:23:53 +01:00
et1011c.c
fixed_phy.c
icplus.c
intel-xway.c
Kconfig	net: phy: leds: Add support for "link" trigger	2017-11-08 10:24:14 +09:00
lxt.c	net: phy: lxt: Export link partner advertising	2017-06-20 13:41:24 -04:00
Makefile	Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net	2017-11-04 09:26:51 +09:00
marvell10g.c	net: phy: marvell10g: fix the PHY id mask	2017-11-28 10:30:38 -05:00
marvell.c	net: phy: marvell: avoid pause mode on SGMII-to-Copper for 88e151x	2017-12-18 15:04:44 -05:00
mdio_bus.c	of_mdio / mdiobus: ensure mdio devices have fwnode correctly populated	2017-12-13 15:01:47 -05:00
mdio_device.c
mdio-bcm-iproc.c
mdio-bcm-unimac.c	net: phy: mdio-bcm-unimac: Use correct I/O accessors	2017-08-29 14:42:17 -07:00
mdio-bitbang.c
mdio-boardinfo.c
mdio-boardinfo.h	License cleanup: add SPDX GPL-2.0 license identifier to files with no license	2017-11-02 11:10:55 +01:00
mdio-cavium.c
mdio-cavium.h
mdio-gpio.c	net: mdio-gpio: make mdiobb_ops const	2017-08-22 14:22:18 -07:00
mdio-hisi-femac.c
mdio-i2c.c	net: phy: add I2C mdio bus	2017-08-06 20:55:28 -07:00
mdio-i2c.h	net: phy: add I2C mdio bus	2017-08-06 20:55:28 -07:00
mdio-moxart.c
mdio-mux-bcm-iproc.c	net: mdio-mux: add mdio_mux parameter to mdio_mux_init()	2017-09-05 14:42:52 -07:00
mdio-mux-gpio.c	net: mdio-mux: add mdio_mux parameter to mdio_mux_init()	2017-09-05 14:42:52 -07:00
mdio-mux-mmioreg.c	net: mdio-mux: add mdio_mux parameter to mdio_mux_init()	2017-09-05 14:42:52 -07:00
mdio-mux.c	net: mdio-mux: add mdio_mux parameter to mdio_mux_init()	2017-09-05 14:42:52 -07:00
mdio-octeon.c
mdio-sun4i.c
mdio-thunder.c
mdio-xgene.c	net: phy: xgene: disable clk on error paths	2017-12-18 15:09:42 -05:00
mdio-xgene.h	drivers: net: phy: xgene: Add lock to protect mac access	2017-05-16 11:41:08 -04:00
meson-gxl.c	net: phy: meson-gxl: make function meson_gxl_read_status static	2017-12-13 15:04:40 -05:00
micrel.c	net: phy: micrel: ksz9031: reconfigure autoneg after phy autoneg workaround	2017-12-26 12:26:43 -05:00
microchip.c	net: phy: Remove residual magic from PHY drivers	2017-05-16 15:58:18 -04:00
mscc.c
national.c
phy_device.c	net: phy: fix resume handling	2017-12-13 15:00:10 -05:00
phy_led_triggers.c	net: phy: leds: Add support for "link" trigger	2017-11-08 10:24:14 +09:00
phy-c45.c	net: phy: split out 10G genphy support	2017-06-06 21:14:13 -04:00
phy-core.c	net: phy: add 1000Base-X to phy settings table	2017-08-06 20:55:28 -07:00
phy.c	net: phy: fix resume handling	2017-12-13 15:00:10 -05:00
phylink.c	phylink: ensure AN is enabled	2017-12-25 21:47:20 -05:00
qsemi.c
realtek.c	net: phy: realtek: fix RTL8211F interrupt mode	2017-11-14 21:33:50 +09:00
rockchip.c	net: phy: Add rockchip PHY driver support	2017-08-11 14:28:58 -07:00
sfp-bus.c	net: phy: Cosmetic fixes to phylink/sfp/sfp-bus.c	2017-11-01 21:15:09 +09:00
sfp.c	sfp: warn about modules requiring address change sequence	2017-12-01 15:18:42 -05:00
sfp.h	sfp: add sfp-bus to bridge between network devices and sfp cages	2017-08-06 20:55:29 -07:00
smsc.c	net: phy: smsc: fix buffer overflow in memcpy	2017-06-22 11:12:31 -04:00
spi_ks8995.c
ste10Xp.c
swphy.c
swphy.h	License cleanup: add SPDX GPL-2.0 license identifier to files with no license	2017-11-02 11:10:55 +01:00
teranetics.c
uPD60620.c	Add a driver for Renesas uPD60620 and uPD60620A PHYs	2017-10-09 20:49:36 -07:00
vitesse.c
xilinx_gmii2rgmii.c	net: phy: Fix mask value write on gmii2rgmii converter speed register	2017-09-18 16:33:18 -07:00