linux/arch/arm/mach-davinci/include/mach
Rajashekhara, Sudhakar a941c50340 davinci: da8xx/omapl EVM: Specify reserved channels/slots
The drivers on da8xx/omapl EVMs do not utilize all the channels
and slots provided by EDMA. Some of these are better utilitzed by
the DSP on the SoC for speeding up codec operations.

Reserve these channels/slots for the DSP.

Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-08-05 09:58:26 -07:00
..
asp.h Merge branch 'davinci-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-davinci 2009-12-09 19:02:46 -08:00
cdce949.h davinci: add support for CDCE949 clock synthesizer 2010-02-04 13:29:58 -08:00
clkdev.h davinci: major rework of clock, PLL, PSC infrastructure 2009-04-23 09:31:00 -07:00
clock.h davinci: major rework of clock, PLL, PSC infrastructure 2009-04-23 09:31:00 -07:00
common.h Davinci: iotable based ioremap() interception 2010-05-13 10:05:31 -07:00
cp_intc.h Davinci: aintc/cpintc - use ioremap() 2010-05-13 10:05:28 -07:00
cpufreq.h davinci: DA850/OMAP-L138: avoid using separate initcall for initializing regulator 2009-11-25 10:21:37 -08:00
cpuidle.h davinci: cpuidle: move mapping of DDR2 controller registers out of driver 2010-02-04 13:29:38 -08:00
cputype.h Davinci: tnetv107x cpu types 2010-05-06 15:02:05 -07:00
da8xx.h davinci: da8xx/omapl EVM: Specify reserved channels/slots 2010-08-05 09:58:26 -07:00
debug-macro.S Davinci: generalized debug macros 2010-06-21 12:48:30 -07:00
dm355.h DaVinci: move AEMIF #define's to the proper headers 2010-05-06 15:02:06 -07:00
dm365.h DaVinci: move AEMIF #define's to the proper headers 2010-05-06 15:02:06 -07:00
dm644x.h DaVinci: move AEMIF #define's to the proper headers 2010-05-06 15:02:06 -07:00
dm646x.h DaVinci: move IDE platform device to its proper place 2010-05-06 15:02:07 -07:00
edma.h davinci: support for EDMA resource sharing 2010-08-05 09:58:25 -07:00
entry-macro.S davinci: Integrate cp_intc support into low-level irq code 2009-05-28 15:17:47 -07:00
gpio.h Davinci: tnetv107x initial gpio support 2010-06-21 12:48:31 -07:00
hardware.h ARM: 5928/1: Change type of VMALLOC_END to unsigned long. 2010-02-15 21:40:33 +00:00
i2c.h Merge branch 'for-next' into for-linus 2010-03-08 16:55:37 +01:00
io.h davinci: Move IO device mapping macros from io.h to hardware.h 2009-08-26 10:57:01 +03:00
irqs.h Davinci: tnetv107x IRQ definitions 2010-05-06 15:02:05 -07:00
keyscan.h Input: davinci_keyscan - add device_enable method to platform data 2010-01-06 00:17:11 -08:00
memory.h davinci: add power management support 2010-02-04 13:29:55 -08:00
mmc.h davinci: mmc: pass number of SG segments as platform data 2010-05-27 09:12:39 -07:00
mux.h DM365: Added more PINMUX configurations for AEMIF 2010-05-13 11:10:31 -07:00
nand.h mtd: Add bad block table overrides to Davinci NAND driver 2009-11-30 11:31:09 +00:00
pm.h davinci: add power management support 2010-02-04 13:29:55 -08:00
psc.h Davinci: tnetv107x LPSC modules 2010-05-06 15:02:05 -07:00
serial.h Davinci: tnetv107x decompresser uart definitions 2010-06-21 12:48:30 -07:00
spi.h DaVinci: SPI: Adding header file for SPI support. 2010-03-01 10:20:22 -08:00
sram.h davinci: add SRAM allocator 2009-05-28 15:18:13 -07:00
system.h Davinci: watchdog reset separation across socs 2010-05-06 15:02:09 -07:00
time.h davinci: Add watchdog base address flexibility 2009-05-26 08:20:31 -07:00
timex.h davinci: explain CLOCK_TICK_RATE of 27MHz in include/mach/timex.h 2010-02-04 13:29:41 -08:00
tnetv107x.h Davinci: tnetv107x soc support 2010-06-21 12:48:30 -07:00
uncompress.h Davinci: tnetv107x decompresser uart definitions 2010-06-21 12:48:30 -07:00
usb.h DaVinci: rename setup_usb() to davinci_setup_usb() 2009-11-25 10:21:33 -08:00
vmalloc.h davinci: Move IO device mapping macros from io.h to hardware.h 2009-08-26 10:57:01 +03:00