leandrof/linux
1
0
Fork 0
forked from Minki/linux
Code Issues Pull Requests Packages Projects Releases Wiki Activity
72718e8ce0
linux/arch/arm/mach-omap2
History
Javier Martinez Canillas 8310f9d295 ARM: OMAP3: igep0020: simplify GPIO LEDs dependencies 
The IGEPv2 board has two user GPIO LEDs and one of them is
default to "on" to tell the user that the board booted correctly.

But to use these LEDs the config options CONFIG_LEDS_GPIO,
CONFIG_LEDS_TRIGGERS and CONFIG_LEDS_TRIGGER_DEFAULT_ON have to
be enabled.

Since only the default-on and default-off triggers were used
anyway, it is better to just use .default_state instead of
.default_trigger and not depend on CONFIG_LEDS_TRIGGER_*

Also, this is consistent with IGEPv2 Device Tree that uses
default-state instead of linux,default-trigger for the leds
device nodes. The LED names also have been updated to use the
same names used on omap3-igep0020.dtb.

Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-02-01 14:59:34 -08:00
..
include/mach ARM: OMAP: Remove NEED_MACH_GPIO_H 2012-11-02 12:00:36 -07:00
am33xx.h ARM: OMAP2+: common: remove mach-omap2/common.c globals and map_common_io code 2012-11-08 12:33:07 -07:00
am35xx-emac.c ARM: OMAP: Make omap_device local to mach-omap2 2012-10-17 12:08:40 -07:00
am35xx-emac.h ARM: OMAP: move generic EMAC init to separate file 2012-03-05 11:08:36 -08:00
am35xx.h ARM: OMAP2+: Make am35xx.h local 2012-09-20 15:02:23 -07:00
board-2430sdp.c omap prcm changes via Paul Walmsley <paul@pwsan.com>: 2012-11-30 08:40:31 -08:00
board-3430sdp.c OMAP: board-files: fix i2c_bus for tfp410 2012-12-14 11:10:59 -08:00
board-3630sdp.c ARM: OMAP2+: board files: use SoC-specific system restart functions 2012-11-08 12:33:08 -07:00
board-4430sdp.c ARM: arm-soc: Board updates for 3.8 2012-12-12 12:14:06 -08:00
board-am3517crane.c ARM: OMAP2+: craneboard: support the TPS65910 PMU 2013-02-01 14:59:34 -08:00
board-am3517evm.c OMAP: board-files: fix i2c_bus for tfp410 2012-12-14 11:10:59 -08:00
board-cm-t35.c OMAP: board-files: fix i2c_bus for tfp410 2012-12-14 11:10:59 -08:00
board-cm-t3517.c ARM: OMAP3: cm-t3517: add MMC support 2013-02-01 14:59:34 -08:00
board-devkit8000.c OMAP: board-files: fix i2c_bus for tfp410 2012-12-14 11:10:59 -08:00
board-flash.c ARM: OMAP: Split plat/cpu.h into local soc.h for mach-omap1 and mach-omap2 2012-10-18 16:23:46 -07:00
board-flash.h ARM: OMAP2+: gpmc: localize gpmc header 2012-10-15 14:42:15 +05:30
board-generic.c ARM: arm-soc: Board updates for 3.8 2012-12-12 12:14:06 -08:00
board-h4.c ARM: OMAP2420: Fix ethernet support for OMAP2420 H4 2012-12-14 11:48:06 -08:00
board-igep0020.c ARM: OMAP3: igep0020: simplify GPIO LEDs dependencies 2013-02-01 14:59:34 -08:00
board-ldp.c ARM: OMAP2+: board files: use SoC-specific system restart functions 2012-11-08 12:33:08 -07:00
board-n8x0.c Merge branch 'i2c-embedded/for-next' of git://git.pengutronix.de/git/wsa/linux 2012-12-18 16:51:10 -08:00
board-omap3beagle.c Merge branch 'omap/cleanup-prcm-part2' into next/dt 2012-11-15 17:59:54 +01:00
board-omap3evm.c OMAP: board-files: fix i2c_bus for tfp410 2012-12-14 11:10:59 -08:00
board-omap3logic.c ARM: OMAP2+: board files: use SoC-specific system restart functions 2012-11-08 12:33:08 -07:00
board-omap3pandora.c ARM: OMAP2+: board files: use SoC-specific system restart functions 2012-11-08 12:33:08 -07:00
board-omap3stalker.c OMAP: board-files: fix i2c_bus for tfp410 2012-12-14 11:10:59 -08:00
board-omap3touchbook.c ARM: OMAP2+: board files: use SoC-specific system restart functions 2012-11-08 12:33:08 -07:00
board-omap4panda.c ARM: OMAP2+: omap4-panda: add UART2 muxing for WiLink shared transport 2013-01-21 10:39:53 -08:00
board-overo.c ARM: arm-soc: Header cleanups 2012-12-12 11:45:16 -08:00
board-rm680.c ARM: arm-soc: Board updates for 3.8 2012-12-12 12:14:06 -08:00
board-rx51-peripherals.c In part2: 2012-12-19 08:14:08 -08:00
board-rx51-video.c OMAP: RX51: remove use of vram 2012-11-13 09:52:29 +02:00
board-rx51.c fbdev changes for 3.8: 2012-12-15 13:03:48 -08:00
board-rx51.h ARM: OMAP2+: Make board-rx51.h local 2012-09-20 15:02:27 -07:00
board-ti8168evm.c ARM: OMAP2+: board files: use SoC-specific system restart functions 2012-11-08 12:33:08 -07:00
board-zoom-debugboard.c ARM: OMAP2+: Make board-zoom.h local 2012-10-17 11:36:46 -07:00
board-zoom-display.c ARM: OMAP: Split plat/cpu.h into local soc.h for mach-omap1 and mach-omap2 2012-10-18 16:23:46 -07:00
board-zoom-peripherals.c Merge branch 'omap-for-v3.8/cleanup-headers-usb' into omap-for-v3.8/cleanup-headers 2012-10-24 15:05:45 -07:00
board-zoom.c ARM: OMAP2+: board files: use SoC-specific system restart functions 2012-11-08 12:33:08 -07:00
board-zoom.h ARM: OMAP2+: Make board-zoom.h local 2012-10-17 11:36:46 -07:00
cclock3xxx_data.c ARM: OMAP3: clock data: Add missing enable/disable for EMU clock 2013-01-02 12:07:16 -07:00
cclock33xx_data.c ARM: AM33XX: clock: add clock data in common clock format 2012-11-12 19:18:49 -07:00
cclock44xx_data.c ARM: OMAP4: clock data: Lock ABE DPLL on all revisions 2013-01-18 16:48:15 -07:00
cclock2420_data.c ARM: OMAP2: Fix missing omap2xxx_clkt_vps_late_init function calls 2013-01-18 16:48:16 -07:00
cclock2430_data.c ARM: OMAP2: Fix missing omap2xxx_clkt_vps_late_init function calls 2013-01-18 16:48:16 -07:00
clkt2xxx_apll.c ARM: OMAP2: clock: Cleanup !CONFIG_COMMON_CLK parts 2012-11-12 19:18:51 -07:00
clkt2xxx_dpll.c ARM: OMAP2: clock: Cleanup !CONFIG_COMMON_CLK parts 2012-11-12 19:18:51 -07:00
clkt2xxx_dpllcore.c omap prcm changes via Paul Walmsley <paul@pwsan.com>: 2012-11-30 08:40:31 -08:00
clkt2xxx_osc.c ARM: OMAP2: clock: Cleanup !CONFIG_COMMON_CLK parts 2012-11-12 19:18:51 -07:00
clkt2xxx_sys.c ARM: OMAP2: clock: Cleanup !CONFIG_COMMON_CLK parts 2012-11-12 19:18:51 -07:00
clkt2xxx_virt_prcm_set.c omap prcm changes via Paul Walmsley <paul@pwsan.com>: 2012-11-30 08:40:31 -08:00
clkt34xx_dpll3m2.c omap prcm changes via Paul Walmsley <paul@pwsan.com>: 2012-11-30 08:40:31 -08:00
clkt_clksel.c ARM: OMAP2+: clock: Cleanup !CONFIG_COMMON_CLK parts 2012-11-12 19:18:51 -07:00
clkt_dpll.c ARM: OMAP2+: clock: Cleanup !CONFIG_COMMON_CLK parts 2012-11-12 19:18:51 -07:00
clkt_iclk.c ARM: OMAP2+: clock: Cleanup !CONFIG_COMMON_CLK parts 2012-11-12 19:18:51 -07:00
clock2xxx.c ARM: OMAP2: clock: Convert to common clk 2012-11-12 19:10:18 -07:00
clock2xxx.h ARM: OMAP2: clock: Cleanup !CONFIG_COMMON_CLK parts 2012-11-12 19:18:51 -07:00
clock3xxx.c ARM: OMAP3: clock: Cleanup !CONFIG_COMMON_CLK parts 2012-11-12 19:18:50 -07:00
clock3xxx.h ARM: OMAP3: clock: Cleanup !CONFIG_COMMON_CLK parts 2012-11-12 19:18:50 -07:00
clock34xx.c ARM: OMAP3: clock: Cleanup !CONFIG_COMMON_CLK parts 2012-11-12 19:18:50 -07:00
clock34xx.h
clock36xx.c ARM: OMAP3: clock: Cleanup !CONFIG_COMMON_CLK parts 2012-11-12 19:18:50 -07:00
clock36xx.h ARM: OMAP3: clock: Cleanup !CONFIG_COMMON_CLK parts 2012-11-12 19:18:50 -07:00
clock44xx.h
clock2430.c ARM: OMAP2: clock: Cleanup !CONFIG_COMMON_CLK parts 2012-11-12 19:18:51 -07:00
clock3517.c ARM: OMAP3: clock: Cleanup !CONFIG_COMMON_CLK parts 2012-11-12 19:18:50 -07:00
clock3517.h
clock_common_data.c ARM: OMAP2+: clock: Cleanup !CONFIG_COMMON_CLK parts 2012-11-12 19:18:51 -07:00
clock.c ARM: OMAP2+: clock: Cleanup !CONFIG_COMMON_CLK parts 2012-11-12 19:18:51 -07:00
clock.h ARM: OMAP4: Enhance support for DPLLs with 4X multiplier 2012-12-15 01:35:46 -07:00
clockdomain.c ARM: OMAP4: Fix EMU clock domain always on 2012-12-15 01:35:54 -07:00
clockdomain.h ARM: OMAP: Split plat/cpu.h into local soc.h for mach-omap1 and mach-omap2 2012-10-18 16:23:46 -07:00
clockdomains2xxx_3xxx_data.c ARM: OMAP2+: hwmod code/clockdomain data: fix 32K sync timer 2012-07-05 17:25:38 -07:00
clockdomains3xxx_data.c ARM: OMAP: Split plat/cpu.h into local soc.h for mach-omap1 and mach-omap2 2012-10-18 16:23:46 -07:00
clockdomains33xx_data.c ARM: OMAP AM33xx: clockdomains: Add clockdomain data and respective operations 2012-06-18 12:08:06 -06:00
clockdomains44xx_data.c ARM: OMAP2+: clockdomain: Fix OMAP4 ISS clk domain to support only SWSUP 2012-10-29 22:02:13 -06:00
clockdomains2420_data.c ARM: OMAP: Split plat/cpu.h into local soc.h for mach-omap1 and mach-omap2 2012-10-18 16:23:46 -07:00
clockdomains2430_data.c ARM: OMAP: Split plat/cpu.h into local soc.h for mach-omap1 and mach-omap2 2012-10-18 16:23:46 -07:00
cm1_44xx.h
cm2_44xx.h
cm2xxx_3xxx.h ARM: OMAP3: clock: Add 3xxx data using common struct clk 2012-11-12 19:18:49 -07:00
cm2xxx.c ARM: OMAP2+: CM/clock: convert _omap2_module_wait_ready() to use SoC-independent CM functions 2012-11-08 12:33:08 -07:00
cm2xxx.h ARM: OMAP2+: CM/clock: convert _omap2_module_wait_ready() to use SoC-independent CM functions 2012-11-08 12:33:08 -07:00
cm3xxx.c ARM: OMAP2+: CM/clock: convert _omap2_module_wait_ready() to use SoC-independent CM functions 2012-11-08 12:33:08 -07:00
cm3xxx.h ARM: OMAP2+: CM/clock: convert _omap2_module_wait_ready() to use SoC-independent CM functions 2012-11-08 12:33:08 -07:00
cm33xx.c omap prcm changes via Paul Walmsley <paul@pwsan.com>: 2012-11-30 08:40:31 -08:00
cm33xx.h ARM: OMAP AM33xx: CM: Introduce AM33xx CM APIs and register level details 2012-06-18 12:08:06 -06:00
cm44xx.c
cm44xx.h
cm_common.c ARM: OMAP2: Fix compillation error in cm_common 2012-11-12 13:42:46 -08:00
cm-regbits-24xx.h ARM: OMAP2: clock: Add 24xx data using common struct clk 2012-11-12 19:18:49 -07:00
cm-regbits-33xx.h ARM: AM33XX: cm: Add bit-field width values 2012-09-22 10:53:08 -06:00
cm-regbits-34xx.h ARM: OMAP3: clock: Add 3xxx data using common struct clk 2012-11-12 19:18:49 -07:00
cm-regbits-44xx.h ARM: OMAP4: cm: add bitfield width values 2012-09-22 10:52:59 -06:00
cm.h ARM: OMAP2+: PRCM: split and relocate the PRM/CM globals setup 2012-11-08 15:09:26 -07:00
cminst44xx.c ARM: OMAP2/3: clockdomain/PRM/CM: move the low-level clockdomain functions into PRM/CM 2012-10-21 01:01:11 -06:00
cminst44xx.h ARM: OMAP2+: PRCM: split and relocate the PRM/CM globals setup 2012-11-08 15:09:26 -07:00
common-board-devices.c ARM: arm-soc: Header cleanups 2012-12-12 11:45:16 -08:00
common-board-devices.h ARM: OMAP2+: nand: unify init functions 2012-10-15 12:00:44 +05:30
common.c ARM: OMAP2+: common: remove use of vram 2012-12-16 11:19:48 -08:00
common.h ARM: arm-soc: Cleanups on various subarchitectures 2012-12-12 11:51:39 -08:00
control.c ARM: OMAP2+: common: remove mach-omap2/common.c globals and map_common_io code 2012-11-08 12:33:07 -07:00
control.h OMAP2: Fix a typo - replace regist with register. 2012-12-17 10:50:41 -08:00
cpuidle34xx.c ARM: OMAP3/4: cpuidle: fix sparse and checkpatch warnings 2012-12-15 01:41:24 -07:00
cpuidle44xx.c ARM: OMAP3/4: cpuidle: fix sparse and checkpatch warnings 2012-12-15 01:41:24 -07:00
ctrl_module_core_44xx.h ARM: OMAP2+: Make ctrl_module_core_44xx.h local 2012-09-20 15:02:29 -07:00
ctrl_module_pad_core_44xx.h ARM: OMAP2+: Make ctrl_module_pad_core_44xx.h local 2012-09-20 15:02:30 -07:00
ctrl_module_pad_wkup_44xx.h ARM: OMAP2+: Make ctrl_module_pad_wkup_44xx.h local 2012-09-20 15:02:32 -07:00
ctrl_module_wkup_44xx.h ARM: OMAP2+: Make ctrl_module_wkup_44xx.h local 2012-09-20 15:02:33 -07:00
devices.c ARM: OMAP2+: Fix section warning for omap_init_ocp2scp() 2013-01-21 10:39:52 -08:00
devices.h
display.c fbdev changes for 3.8: 2012-12-15 13:03:48 -08:00
display.h
dma.c ARM: OMAP: Move plat-omap/dma-omap.h to include/linux/omap-dma.h 2012-11-30 08:41:50 -08:00
dma.h ARM: OMAP2+: DMA: Moving OMAP2+ DMA channel definitions to mach-omap2 2012-10-15 14:03:51 -07:00
dpll3xxx.c ARM: arm-soc: late cleanups for omap 2012-12-30 09:59:21 -08:00
dpll44xx.c ARM: OMAP4: Enhance support for DPLLs with 4X multiplier 2012-12-15 01:35:46 -07:00
drm.c ARM: OMAP2+: fix build break for omapdrm 2013-01-21 10:34:08 -08:00
dsp.c ARM: OMAP: Make plat/omap-pm.h local to mach-omap2 2012-10-18 16:22:08 -07:00
dss-common.c ARM: OMAP2+: Drop plat/cpu.h for omap2plus 2012-12-17 10:50:41 -08:00
dss-common.h OMAP: omap4sdp: move display init from board file to dss-common.c 2012-11-07 13:26:51 -08:00
emu.c ARM: OMAP: Split plat/hardware.h, use local soc.h for omap2+ 2012-09-12 18:06:31 -07:00
fb.c ARM: OMAP: Split fb.c to remove last remaining cpu_is_omap usage 2012-12-17 10:50:40 -08:00
gpio.c ARM: OMAP: Make plat/omap-pm.h local to mach-omap2 2012-10-18 16:22:08 -07:00
gpmc-nand.c ARM: OMAP2+: nand: remove redundant rounding 2012-11-09 00:59:16 +05:30
gpmc-nand.h ARM: OMAP2+: gpmc: localize gpmc header 2012-10-15 14:42:15 +05:30
gpmc-onenand.c ARM: OMAP2+: onenand: generic timing calculation 2012-11-09 18:07:12 +05:30
gpmc-onenand.h ARM: OMAP2+: onenand: header cleanup 2012-10-15 14:42:03 +05:30
gpmc-smc91x.c ARM: OMAP2+: smc91x: generic timing calculation 2012-11-09 18:07:22 +05:30
gpmc-smc91x.h ARM: OMAP2+: Make gpmc-smc91x.h local 2012-09-20 15:02:49 -07:00
gpmc-smsc911x.c ARM: OMAP2+: gpmc: localize gpmc header 2012-10-15 14:42:15 +05:30
gpmc-smsc911x.h ARM: OMAP2+: Make gpmc-smsc911x.h local 2012-09-20 15:03:55 -07:00
gpmc.c ARM: OMAP2+: Remove apollon board support 2013-02-01 10:11:19 -08:00
gpmc.h ARM: OMAP2+: gpmc: generic timing calculation 2012-11-09 18:07:11 +05:30
hdq1w.c ARM: OMAP2+: PRCM: consolidate PRCM-related timeout macros 2012-11-08 15:09:26 -07:00
hdq1w.h ARM: OMAP: Make plat/omap_hwmod.h local to mach-omap2 2012-10-18 16:05:55 -07:00
hsmmc.c ARM: OMAP: Remove unnecessary mach and plat includes 2012-11-02 12:00:36 -07:00
hsmmc.h MMC highlights for 3.4: 2012-03-28 20:59:45 -07:00
hwspinlock.c ARM: OMAP: Make plat/omap_hwmod.h local to mach-omap2 2012-10-18 16:05:55 -07:00
i2c.c ARM: OMAP: Fix build breakage due to missing include in i2c.c 2012-12-20 08:43:25 -08:00
i2c.h ARM: OMAP: Fix relative includes for shared i2c.h file 2012-10-31 15:37:13 -07:00
id.c omap prcm changes via Paul Walmsley <paul@pwsan.com>: 2012-11-30 08:40:31 -08:00
id.h ARM: OMAP2+: Make id.h local 2012-09-20 15:02:22 -07:00
io.c ARM: OMAP: Move plat-omap/dma-omap.h to include/linux/omap-dma.h 2012-11-30 08:41:50 -08:00
iomap.h ARM: OMAP5: Add minimal support for OMAP5430 SOC 2012-07-09 19:14:39 +05:30
irq.c These fixes are needed to fix non-omap build breakage for 2012-09-23 17:15:44 -06:00
Kconfig ARM: OMAP2+: Remove apollon board support 2013-02-01 10:11:19 -08:00
l3_2xxx.h ARM: OMAP2+: Make l3_2xxx.h local 2012-09-20 15:03:59 -07:00
l3_3xxx.h ARM: OMAP2+: Make l3_3xxx.h local 2012-09-20 15:04:00 -07:00
l4_2xxx.h ARM: OMAP2+: Make l4_2xxx.h local 2012-09-20 15:04:01 -07:00
l4_3xxx.h ARM: OMAP2+: Make l4_3xxx.h local 2012-09-20 15:04:03 -07:00
mailbox.c ARM: drivers: remove __dev* attributes. 2013-01-03 15:57:04 -08:00
Makefile ARM: OMAP2+: Remove apollon board support 2013-02-01 10:11:19 -08:00
Makefile.boot ARM: dtb: move all dtb targets to common Makefile 2012-09-20 22:58:17 -07:00
mcbsp.c ARM: OMAP: Move plat-omap/dma-omap.h to include/linux/omap-dma.h 2012-11-30 08:41:50 -08:00
mmc.h ARM: OMAP: Split plat/mmc.h into local headers and platform_data 2012-10-15 12:09:43 -07:00
msdi.c ARM: OMAP2+: PRCM: consolidate PRCM-related timeout macros 2012-11-08 15:09:26 -07:00
mux34xx.c OMAP2+: mux: Fixed gpio mux mode analysis 2012-12-14 11:11:34 -08:00
mux34xx.h
mux44xx.c
mux44xx.h
mux2420.c
mux2420.h
mux2430.c
mux2430.h
mux.c OMAP2+: mux: Fixed gpio mux mode analysis 2012-12-14 11:11:34 -08:00
mux.h OMAP2+: mux: Fixed gpio mux mode analysis 2012-12-14 11:11:34 -08:00
omap2-restart.c ARM: OMAP2+: PRCM: create SoC-specific chip restart functions 2012-11-08 12:33:08 -07:00
omap3-restart.c ARM: OMAP2+: PRCM: create SoC-specific chip restart functions 2012-11-08 12:33:08 -07:00
omap4-common.c ARM: arm-soc: Cleanups on various subarchitectures 2012-12-12 11:51:39 -08:00
omap4-keypad.h ARM: OMAP2+: Make omap4-keypad.h local 2012-09-20 15:04:04 -07:00
omap4-sar-layout.h ARM: OMAP5: Add the WakeupGen IP updates 2012-07-09 19:14:39 +05:30
omap24xx.h ARM: OMAP2+ Move SoC specific headers to be local to mach-omap2 2012-09-12 18:06:31 -07:00
omap34xx.h ARM: OMAP2+ Move SoC specific headers to be local to mach-omap2 2012-09-12 18:06:31 -07:00
omap44xx.h ARM: OMAP2+ Move SoC specific headers to be local to mach-omap2 2012-09-12 18:06:31 -07:00
omap54xx.h ARM: OMAP2+ Move SoC specific headers to be local to mach-omap2 2012-09-12 18:06:31 -07:00
omap_device.c ARM: OMAP2+: omap_device: Correct resource handling for DT boot 2012-11-21 16:15:18 -07:00
omap_device.h ARM: OMAP: Make plat/omap_hwmod.h local to mach-omap2 2012-10-18 16:05:55 -07:00
omap_hwmod_2xxx_3xxx_interconnect_data.c ARM: OMAP: Split plat/serial.h for omap1 and omap2+ 2012-10-24 13:34:31 -07:00
omap_hwmod_2xxx_3xxx_ipblock_data.c ARM: OMAP: Move plat-omap/dma-omap.h to include/linux/omap-dma.h 2012-11-30 08:41:50 -08:00
omap_hwmod_2xxx_interconnect_data.c ARM: OMAP: Split plat/serial.h for omap1 and omap2+ 2012-10-24 13:34:31 -07:00
omap_hwmod_2xxx_ipblock_data.c Remaining patches to allow omap2+ to build with multiplatform 2012-11-30 21:47:21 -08:00
omap_hwmod_3xxx_data.c Merge branch 'i2c-embedded/for-next' of git://git.pengutronix.de/git/wsa/linux 2012-12-18 16:51:10 -08:00
omap_hwmod_33xx_data.c ARM: OMAP2+: am33xx-hwmod: Fix wrongly terminated am33xx_usbss_mpu_irqs array 2013-01-07 12:38:07 -08:00
omap_hwmod_44xx_data.c ARM: OMAP4: hwmod_data: Correct IDLEMODE for McPDM 2013-01-18 16:48:16 -07:00
omap_hwmod_2420_data.c Remaining patches to allow omap2+ to build with multiplatform 2012-11-30 21:47:21 -08:00
omap_hwmod_2430_data.c Merge branch 'i2c-embedded/for-next' of git://git.pengutronix.de/git/wsa/linux 2012-12-18 16:51:10 -08:00
omap_hwmod_common_data.c ARM: OMAP: Make plat/omap_hwmod.h local to mach-omap2 2012-10-18 16:05:55 -07:00
omap_hwmod_common_data.h ARM: OMAP: Make plat/omap_hwmod.h local to mach-omap2 2012-10-18 16:05:55 -07:00
omap_hwmod.c ARM: arm-soc: Merge branch 'next/clk' into next/pm 2012-12-12 16:10:00 -08:00
omap_hwmod.h ARM: arm-soc: Merge branch 'next/clk' into next/pm 2012-12-12 16:10:00 -08:00
omap_opp_data.h Merge branch 'omap-for-v3.8/pm' into omap-for-v3.8/clock 2012-11-13 13:25:38 -08:00
omap_phy_internal.c ARM: arm-soc: Merge branch 'next/clk' into next/pm 2012-12-12 16:10:00 -08:00
omap_twl.c ARM: OMAP2+: omap_twl: Change TWL4030_MODULE_PM_RECEIVER to TWL_MODULE_PM_RECEIVER 2012-12-17 10:50:41 -08:00
omap-headsmp.S ARM: OMAP4460: Workaround for ROM bug because of CA9 r2pX GIC control register change. 2012-11-05 14:26:43 -08:00
omap-hotplug.c Merge branch 'multiplatform/smp_ops' into next/multiplatform 2012-09-22 00:16:04 -07:00
omap-iommu.c ARM: OMAP2+: Trivial fix for IOMMU merge issue 2012-12-20 14:15:26 -08:00
omap-mpuss-lowpower.c ARM: arm-soc: Header cleanups 2012-12-12 11:45:16 -08:00
omap-pm-noop.c ARM: OMAP: Move omap-pm-noop.c local to mach-omap2 2012-10-31 15:37:13 -07:00
omap-pm.h ARM: OMAP: Make plat/omap-pm.h local to mach-omap2 2012-10-18 16:22:08 -07:00
omap-secure.c ARM: OMAP: Move plat/omap-secure.h locally to mach-omap2 2012-10-18 16:22:24 -07:00
omap-secure.h ARM: OMAP: Move plat/omap-secure.h locally to mach-omap2 2012-10-18 16:22:24 -07:00
omap-smc.S
omap-smp.c ARM: OMAP4: PM: fix errata handling when CONFIG_PM=n 2012-11-14 17:06:20 -08:00
omap-wakeupgen.c ARM: soc: general cleanups 2012-10-01 18:19:05 -07:00
omap-wakeupgen.h ARM: OMAP2+: Make omap-wakeupgen.h local 2012-09-20 15:02:37 -07:00
opp2xxx.h
opp3xxx_data.c ARM: OMAP: Split plat/cpu.h into local soc.h for mach-omap1 and mach-omap2 2012-10-18 16:23:46 -07:00
opp4xxx_data.c ARM: OMAP4: OPP: add OMAP4460 definitions 2012-11-05 15:31:49 -08:00
opp2420_data.c ARM: OMAP: Split plat/hardware.h, use local soc.h for omap2+ 2012-09-12 18:06:31 -07:00
opp2430_data.c ARM: OMAP: Split plat/hardware.h, use local soc.h for omap2+ 2012-09-12 18:06:31 -07:00
opp.c ARM: OMAP: Make omap_device local to mach-omap2 2012-10-17 12:08:40 -07:00
pm24xx.c ARM: OMAP: Move plat-omap/dma-omap.h to include/linux/omap-dma.h 2012-11-30 08:41:50 -08:00
pm34xx.c ARM: OMAP: Move plat-omap/dma-omap.h to include/linux/omap-dma.h 2012-11-30 08:41:50 -08:00
pm44xx.c ARM: arm-soc: Merge branch 'next/clk' into next/pm 2012-12-12 16:10:00 -08:00
pm-debug.c ARM: OMAP: Remove unnecessary inclusion of dmtimer.h 2012-11-16 10:35:08 -06:00
pm.c ARM: arm-soc: Merge branch 'next/clk' into next/pm 2012-12-12 16:10:00 -08:00
pm.h ARM: arm-soc: power management and clock changes 2012-12-13 10:58:20 -08:00
pmu.c ARM: OMAP2+: PMU: Remove unused header 2012-12-17 10:50:41 -08:00
powerdomain-common.c ARM: OMAP2+: Fix build issues with missing include of linux/bug.h 2012-03-07 17:29:34 -08:00
powerdomain.c ARM: OMAP2+: PRCM: remove obsolete prcm.[ch] 2012-11-08 15:09:26 -07:00
powerdomain.h ARM: OMAP: Split plat/cpu.h into local soc.h for mach-omap1 and mach-omap2 2012-10-18 16:23:46 -07:00
powerdomains2xxx_3xxx_data.c
powerdomains2xxx_3xxx_data.h
powerdomains2xxx_data.c ARM: OMAP: Split plat/cpu.h into local soc.h for mach-omap1 and mach-omap2 2012-10-18 16:23:46 -07:00
powerdomains3xxx_data.c ARM: OMAP: Split plat/hardware.h, use local soc.h for omap2+ 2012-09-12 18:06:31 -07:00
powerdomains33xx_data.c ARM: OMAP AM33xx: powerdomains: add AM335x support 2012-06-18 12:08:06 -06:00
powerdomains44xx_data.c
prcm44xx.h
prcm_mpu44xx.c ARM: OMAP2+: PRCM: split and relocate the PRM/CM globals setup 2012-11-08 15:09:26 -07:00
prcm_mpu44xx.h ARM: OMAP2+: PRCM: split and relocate the PRM/CM globals setup 2012-11-08 15:09:26 -07:00
prcm-common.h ARM: OMAP2+: PRCM: consolidate PRCM-related timeout macros 2012-11-08 15:09:26 -07:00
prm2xxx_3xxx.c ARM: OMAP2/3: PRM: fix bogus OMAP2xxx powerstate return values 2013-01-02 12:07:16 -07:00
prm2xxx_3xxx.h ARM: OMAP3: clock: Add 3xxx data using common struct clk 2012-11-12 19:18:49 -07:00
prm2xxx.c Some OMAP PRCM and sparse fixes against v3.8-rc1. A basic set of test 2013-01-03 11:04:21 -08:00
prm2xxx.h ARM: OMAP2+: PRM: initialize some PRM functions early 2012-11-21 16:15:16 -07:00
prm3xxx.c Some OMAP PRCM and sparse fixes against v3.8-rc1. A basic set of test 2013-01-03 11:04:21 -08:00
prm3xxx.h ARM: OMAP2+: PRM: initialize some PRM functions early 2012-11-21 16:15:16 -07:00
prm33xx.c omap prcm changes via Paul Walmsley <paul@pwsan.com>: 2012-11-30 08:40:31 -08:00
prm33xx.h ARM: OMAP AM33xx: PRM: add PRM support 2012-06-18 12:08:06 -06:00
prm44xx.c ARM: OMAP4: PRM: Correct wrong instance usage for reading reset sources 2013-01-02 12:07:16 -07:00
prm44xx.h ARM: OMAP4: PRM: fix RSTTIME and RSTST offsets 2013-01-02 12:07:16 -07:00
prm_common.c omap prcm changes via Paul Walmsley <paul@pwsan.com>: 2012-11-30 08:40:31 -08:00
prm-regbits-24xx.h ARM: OMAP2: clock: Add 24xx data using common struct clk 2012-11-12 19:18:49 -07:00
prm-regbits-33xx.h ARM: OMAP AM33xx: PRM: add PRM support 2012-06-18 12:08:06 -06:00
prm-regbits-34xx.h ARM: OMAP3: clock: Add 3xxx data using common struct clk 2012-11-12 19:18:49 -07:00
prm-regbits-44xx.h
prm.h ARM: OMAP2+: hwmod: Add support for per hwmod/module context lost count 2012-11-21 16:15:17 -07:00
prminst44xx.c ARM: OMAP4+: Add prm and cm base init function. 2012-05-07 23:55:22 -06:00
prminst44xx.h ARM: OMAP2+: PRCM: split and relocate the PRM/CM globals setup 2012-11-08 15:09:26 -07:00
scrm44xx.h ARM: OMAP4: clock: Add 44xx data using common struct clk 2012-11-12 19:10:20 -07:00
sdram-hynix-h8mbx00u0mer-0em.h ARM: OMAP: move plat-omap/include/plat/sdrc.h into mach-omap2/sdrc.h 2012-10-17 10:18:37 -07:00
sdram-micron-mt46h32m32lf-6.h ARM: OMAP: move plat-omap/include/plat/sdrc.h into mach-omap2/sdrc.h 2012-10-17 10:18:37 -07:00
sdram-nokia.c ARM: OMAP: remove plat/clock.h 2012-10-18 16:23:20 -07:00
sdram-nokia.h
sdram-numonyx-m65kxxxxam.h ARM: OMAP: move plat-omap/include/plat/sdrc.h into mach-omap2/sdrc.h 2012-10-17 10:18:37 -07:00
sdram-qimonda-hyb18m512160af-6.h ARM: OMAP: move plat-omap/include/plat/sdrc.h into mach-omap2/sdrc.h 2012-10-17 10:18:37 -07:00
sdrc2xxx.c omap prcm changes via Paul Walmsley <paul@pwsan.com>: 2012-11-30 08:40:31 -08:00
sdrc.c omap prcm changes via Paul Walmsley <paul@pwsan.com>: 2012-11-30 08:40:31 -08:00
sdrc.h ARM: OMAP2+: common: remove mach-omap2/common.c globals and map_common_io code 2012-11-08 12:33:07 -07:00
serial.c ARM: OMAP: Move plat/omap-serial.h to include/linux/platform_data/serial-omap.h 2012-12-14 14:50:09 -08:00
serial.h ARM: OMAP2+: Fix relative includes for serial.h 2012-10-31 15:37:14 -07:00
sleep24xx.S ARM: OMAP2+ Move SoC specific headers to be local to mach-omap2 2012-09-12 18:06:31 -07:00
sleep34xx.S omap prcm changes via Paul Walmsley <paul@pwsan.com>: 2012-11-30 08:40:31 -08:00
sleep44xx.S ARM: OMAP2+: Make omap-secure.h local 2012-09-20 15:02:35 -07:00
smartreflex-class3.c ARM: OMAP2+: smartreflex: Use the names from hwmod data instead of voltage domains. 2012-05-31 16:03:44 -07:00
soc.h ARM: OMAP4: ID: Improve features detection and check 2012-11-14 12:10:37 -08:00
sr_device.c Merge branch 'omap-for-v3.8/pm' into omap-for-v3.8/clock 2012-11-13 13:25:38 -08:00
sram34xx.S ARM: OMAP2+: CM/hwmod: split CM functions into OMAP2, OMAP3-specific files 2012-10-21 01:01:11 -06:00
sram242x.S ARM: OMAP2+: CM/hwmod: split CM functions into OMAP2, OMAP3-specific files 2012-10-21 01:01:11 -06:00
sram243x.S ARM: OMAP2+: CM/hwmod: split CM functions into OMAP2, OMAP3-specific files 2012-10-21 01:01:11 -06:00
sram.c ARM: OMAP: Move omap2+ specific parts of sram.c to mach-omap2 2012-10-31 10:14:14 -07:00
sram.h ARM: OMAP: Split sram.h to local headers and minimal shared header 2012-10-31 10:14:13 -07:00
ti81xx.h ARM: OMAP2+: common: remove mach-omap2/common.c globals and map_common_io code 2012-11-08 12:33:07 -07:00
timer.c ARM: OMAP2+: DT node Timer iteration fix 2013-01-21 10:39:53 -08:00
twl-common.c ARM: arm-soc: Merge branch 'next/clk' into next/pm 2012-12-12 16:10:00 -08:00
twl-common.h Sound updates for 3.7-rc1 2012-10-09 07:07:14 +09:00
usb-host.c mfd: omap-usb-host: get rid of cpu_is_omap..() macros 2012-12-14 11:48:06 -08:00
usb-musb.c Merge branch 'omap-for-v3.8/cleanup-headers-usb' into omap-for-v3.8/cleanup-headers 2012-10-24 15:05:45 -07:00
usb-tusb6010.c ARM: OMAP2+: tusb6010: generic timing calculation 2012-11-09 18:07:23 +05:30
usb.h ARM: OMAP: move OMAP USB platform data to <linux/platform_data/omap-usb.h> 2012-10-24 14:26:55 -07:00
vc3xxx_data.c ARM: OMAP3+: voltage: introduce omap vc / vp params for voltagedomains 2012-11-05 15:08:22 -08:00
vc44xx_data.c ARM: OMAP3+: voltage: introduce omap vc / vp params for voltagedomains 2012-11-05 15:08:22 -08:00
vc.c Merge branch 'next/pm-samsung' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/pm 2012-11-30 09:12:33 -08:00
vc.h ARM: OMAP3: VC: calculate ramp times 2012-11-05 15:08:23 -08:00
voltage.c ARM: OMAP: unwrap strings 2012-09-12 02:57:10 -06:00
voltage.h ARM: OMAP4: VC: setup I2C parameters based on board data 2012-11-05 15:31:12 -08:00
voltagedomains2xxx_data.c
voltagedomains3xxx_data.c ARM: OMAP3+: voltage: introduce omap vc / vp params for voltagedomains 2012-11-05 15:08:22 -08:00
voltagedomains33xx_data.c ARM: OMAP AM33xx: voltagedomain: Add voltage domain data 2012-06-18 00:47:26 -06:00
voltagedomains44xx_data.c Merge branch 'omap-for-v3.8/pm' into omap-for-v3.8/clock 2012-11-13 13:25:38 -08:00
vp3xxx_data.c ARM: OMAP3+: voltage: introduce omap vc / vp params for voltagedomains 2012-11-05 15:08:22 -08:00
vp44xx_data.c ARM: OMAP3+: voltage: introduce omap vc / vp params for voltagedomains 2012-11-05 15:08:22 -08:00
vp.c OMAP voltage layer updates towards supporting auto-retention/auto-off 2012-11-06 17:06:37 -08:00
vp.h ARM: OMAP3+: voltage: introduce omap vc / vp params for voltagedomains 2012-11-05 15:08:22 -08:00
wd_timer.c ARM: OMAP2+: PRCM: consolidate PRCM-related timeout macros 2012-11-08 15:09:26 -07:00
wd_timer.h ARM: OMAP: Make plat/omap_hwmod.h local to mach-omap2 2012-10-18 16:05:55 -07:00