linux/include/dt-bindings
Arnd Bergmann 6ac5482ee6 Second Round of Renesas ARM Based SoC DT Updates for v4.15
* r8a77430 (RZ/G1M) SoC
   - Add XHCI support to SoC DT. Boards may enable this as appropriate
 
 * All Renesas ARM based SoCs
   - Add missing clocks for ARM CPU cores
 
     Geert Uytterhoeven says "This series improves DT hardware descriptions
     for Renesas arm32 SoCs by adding missing clocks properties to the
     device nodes corresponding to ARM CPU cores."
 
 * R-Car Gen 1 and 2, and RZ/G SoCs
   - Use R-Car Fallback compat strings for GPIO
 
     Simon Horman says "Use newly added R-Car GPIO Gen 1, 2 and 3 fallback
     compat strings in peace of now deprecated non-generation specific R-Car
     GPIO fallback compat string in the DT of Renesas ARM and arm64 based
     SoCs.
 
     As noted in the changelogs for the r8a777[89] changes, this introduces
     an incompatibility with pre-v4.14 kernels used with new DTBs. There is
     no run-time effect for other SoCs updated by this changeset."
 
 * r7s72100 (RZ/A1H) GR-Peach board
   - Add pin configuration subnode for ETHER pin group.
     This avoids relying on boot-loader configuration of these pins.
 
   - Enable ostm0 and ostm1 timers
 
     Jacopo Mondi says these are "to be used as clock source and clockevent
     source. The timers provides greater accuracy than the already enabled
     mtu2 one."
 
   - Correct leds node name indent
 
   - Enable MTU2 timer pulse unit
 
    Jacopo Mondi says "MTU2 multi-function/multi-channel timer/counter is
    not enabled for GR-Peach board. The timer is used as clock event source
    to schedule wake-ups, and without this enabled all sleeps not performed
    through busy waiting hang the board."
 
 * r8a7743 (RZ/G1M) iW-RainboW-G20M-Qseven SoM
   - Add USB function support
 
 * r8a7745 (RZ/G1E) iW-RainboW-G22D development platform
   - Add USB2.0 Host support
 
 * r8a7743 (RZ/G1M) iW-RainboW-G20D-Qseven development platform
   - Rework DT architecture and add DT for camera DB
 
     Fabrizio Castro says "Some of the serial interfaces are exposed on the
     camera daughter board.  The camera daughter board can be connected to
     the carrier board by means of expansion connectors 1, 2 and 3. The
     carrier board may host an RZ/G1M or an RZ/G1N based SoM.
 
     While adding support for the serial interfaces on the camera daughter
     board we faced the dilemma of how to properly describe all of the
     possible HW configurations and how to maximize code reuse.
 
     The best option would be to use device tree overlays, however there is
     still some work to be done on that front before actually using them,
     therefore for the time being we decided to provide .dtsi files to
     describe the carrier board and the camera daughter board, and provide
     .dts files to describe the HW configurations we need to support."
 
 * r8a779[0-4] R-Car Gen2 SoCs
   - Use generic node name for VSP1 nodes
 
     Geert Uytterhoeven says "This patch series replaces the specific node
     names used for the VSP1 nodes by the preferred generic node names, cfr.
     commit 0e1bfb72b0 ("v4l: vsp1: Use generic node name")."
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEE4nzZofWswv9L/nKF189kaWo3T74FAlnpyZ4ACgkQ189kaWo3
 T74hdw//TFy3jIbO2Uc6lk/dPDgDTY9su+acosM496PjUWu1a0qxc6haEfbQzz/t
 Tz6jCKaqOa7V/v+44vye00sU/iG22DJum7S+Hq2bBPrhOYWUcUxU1r7uwFC1+/TL
 L9hk/fNqUkkB1C/8mOjrQUsnVLUt8uYIu3jPTjfrStyL1on2SnrCxi4y6sxZLFpc
 nv8hcAk61iBW8JfC66g0Hx2eChd9aJBhRFYh3SIpzeeKMufRn8NeeUlK1/DSbLW9
 GYWYyC5bw8Ie7JvzrucY9pp4MFtmxmObPlUKoZrpikrFv0ZCMoW3z27ZhU4ooFhd
 aPMy4I+mbT5Ua+KzeIQiG+HftLuNrYZqiqg92h1MRdUoTCug9u531Y0sN/qAn1sN
 XJZ4NK+yY8V8mJGgFIeXF0qSNlzynpHd44HO4cEGtXP5RlgQFIu+vhhEV0hOO86p
 3jbI35ATPcYjmBXY3tDQhPp0WxL/zgspX3YqRtgYGHa50XtcVMAt8Z2oA4PotTgY
 hfStHKR9nLsf1TMUv7kqbH/T4mujVOnIMJ2zd85S8Pujdt5mdEyrUChKTlXPzCZg
 nTigppy8hIYGix24b5guOMfh4HPEenTWNQS2vZ687r2DwayKYTAV4bJTPEpxckoj
 rxnoGDJjt7Hfc8cTIjPSalOgS5UjweRaGIvihxg43qyRKtkyxjg=
 =Y3FX
 -----END PGP SIGNATURE-----

Merge tag 'renesas-dt2-for-v4.15' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt

Pull "Second Round of Renesas ARM Based SoC DT Updates for v4.15" from Simon Horman:

* r8a77430 (RZ/G1M) SoC
  - Add XHCI support to SoC DT. Boards may enable this as appropriate

* All Renesas ARM based SoCs
  - Add missing clocks for ARM CPU cores

    Geert Uytterhoeven says "This series improves DT hardware descriptions
    for Renesas arm32 SoCs by adding missing clocks properties to the
    device nodes corresponding to ARM CPU cores."

* R-Car Gen 1 and 2, and RZ/G SoCs
  - Use R-Car Fallback compat strings for GPIO

    Simon Horman says "Use newly added R-Car GPIO Gen 1, 2 and 3 fallback
    compat strings in peace of now deprecated non-generation specific R-Car
    GPIO fallback compat string in the DT of Renesas ARM and arm64 based
    SoCs.

    As noted in the changelogs for the r8a777[89] changes, this introduces
    an incompatibility with pre-v4.14 kernels used with new DTBs. There is
    no run-time effect for other SoCs updated by this changeset."

* r7s72100 (RZ/A1H) GR-Peach board
  - Add pin configuration subnode for ETHER pin group.
    This avoids relying on boot-loader configuration of these pins.

  - Enable ostm0 and ostm1 timers

    Jacopo Mondi says these are "to be used as clock source and clockevent
    source. The timers provides greater accuracy than the already enabled
    mtu2 one."

  - Correct leds node name indent

  - Enable MTU2 timer pulse unit

   Jacopo Mondi says "MTU2 multi-function/multi-channel timer/counter is
   not enabled for GR-Peach board. The timer is used as clock event source
   to schedule wake-ups, and without this enabled all sleeps not performed
   through busy waiting hang the board."

* r8a7743 (RZ/G1M) iW-RainboW-G20M-Qseven SoM
  - Add USB function support

* r8a7745 (RZ/G1E) iW-RainboW-G22D development platform
  - Add USB2.0 Host support

* r8a7743 (RZ/G1M) iW-RainboW-G20D-Qseven development platform
  - Rework DT architecture and add DT for camera DB

    Fabrizio Castro says "Some of the serial interfaces are exposed on the
    camera daughter board.  The camera daughter board can be connected to
    the carrier board by means of expansion connectors 1, 2 and 3. The
    carrier board may host an RZ/G1M or an RZ/G1N based SoM.

    While adding support for the serial interfaces on the camera daughter
    board we faced the dilemma of how to properly describe all of the
    possible HW configurations and how to maximize code reuse.

    The best option would be to use device tree overlays, however there is
    still some work to be done on that front before actually using them,
    therefore for the time being we decided to provide .dtsi files to
    describe the carrier board and the camera daughter board, and provide
    .dts files to describe the HW configurations we need to support."

* r8a779[0-4] R-Car Gen2 SoCs
  - Use generic node name for VSP1 nodes

    Geert Uytterhoeven says "This patch series replaces the specific node
    names used for the VSP1 nodes by the preferred generic node names, cfr.
    commit 0e1bfb72b0 ("v4l: vsp1: Use generic node name")."

* tag 'renesas-dt2-for-v4.15' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (42 commits)
  ARM: dts: r8a7743: Add xhci support to SoC dtsi
  ARM: dts: r7s72100: Add clock for CA9 CPU core
  dt-bindings: clk: r7s72100: Add missing I and G clocks
  ARM: dts: sh73a0: Add clocks for CA9 CPU cores
  ARM: dts: r8a7794: Add missing clock for secondary CA7 CPU core
  ARM: dts: r8a7793: Add missing clock for secondary CA15 CPU core
  ARM: dts: r8a7792: Add missing clock for secondary CA15 CPU core
  ARM: dts: r8a7791: Add missing clock for secondary CA15 CPU core
  ARM: dts: r8a7790: Add clocks for CA7 CPU cores
  ARM: dts: r8a7790: Add missing clocks for secondary CA15 CPU cores
  ARM: dts: r8a7779: Add clocks for CA9 CPU cores
  ARM: dts: r8a7778: Add clock for CA9 CPU core
  ARM: dts: r8a7743: Add missing clock for secondary CA15 CPU core
  ARM: dts: r8a73a4: Add clock for CA15 CPU0 core
  ARM: dts: r8a7794: Use R-Car GPIO Gen2 fallback compat string
  ARM: dts: r8a7793: Use R-Car GPIO Gen2 fallback compat string
  ARM: dts: r8a7792: Use R-Car GPIO Gen2 fallback compat string
  ARM: dts: r8a7791: Use R-Car GPIO Gen2 fallback compat string
  ARM: dts: r8a7790: Use R-Car GPIO Gen2 fallback compat string
  ARM: dts: r8a7743: Use R-Car GPIO Gen2 fallback compat string
  ...
2017-10-30 12:02:31 +01:00
..
arm
clk
clock dt-bindings: clk: r7s72100: Add missing I and G clocks 2017-10-16 11:51:10 +02:00
display drm/i2c: tda998x: Register ASoC hdmi-codec and add audio DT binding 2016-09-07 13:10:10 +01:00
dma devicetree: Add bindings documentation for Analog Devices AXI-DMAC 2015-08-23 18:55:10 +05:30
gpio gpio: Add new flags to control sleep status of GPIOs 2017-05-29 11:07:55 +02:00
i2c dt-bindings: add header for generic I2C flags in bindings 2015-08-24 14:05:09 +02:00
iio iio: dac: Add support for the AD5592R/AD5593R ADCs/DACs 2016-04-10 14:29:06 +01:00
input devicetree: bindings: Use linux-event-codes.h for evdev codes 2015-10-16 15:32:15 -07:00
interrupt-controller irqchip/irq-mvebu-icu: Add new driver for Marvell ICU 2017-06-23 09:14:57 +01:00
leds leds: pca955x: add GPIO support 2017-08-14 22:22:37 +02:00
mailbox dt-bindings: mailbox: Add Tegra HSP binding 2016-11-15 15:52:58 +01:00
media [media] tvp5150: replace MEDIA_ENT_F_CONN_TEST by a control 2016-02-16 08:59:54 -02:00
memory iommu/mediatek: Move MTK_M4U_TO_LARB/PORT into mtk_iommu.c 2017-08-22 16:37:58 +02:00
mfd clk: stm32h7: Add stm32h743 clock driver 2017-08-31 18:35:47 -07:00
mips MIPS: lantiq: Add a GPHY driver which uses the RCU syscon-mfd 2017-09-04 21:19:02 +02:00
mux dt-bindings: document devicetree bindings for mux-controllers and gpio-mux 2017-06-03 19:25:40 +09:00
net net: phy: Add LED mode driver for Microsemi PHYs. 2017-02-08 13:29:04 -05:00
phy
pinctrl Device tree changes for omaps for v4.15 merge window to improve 2017-10-20 00:45:19 +02:00
power dt-bindings: power: add R8A77970 SYSC power domain definitions 2017-09-18 08:07:58 +02:00
pwm
regulator
reset ARC: reset: remove the misleading v1 suffix all over 2017-09-18 13:02:03 +02:00
soc soc: zte: Add header for PM domains specifiers 2017-01-11 16:21:06 +08:00
sound scripts/spelling.txt: add "overide" pattern and fix typo instances 2017-03-09 17:01:09 -08:00
spmi
thermal devicetree: add lm90 thermal_zone sensor support 2017-02-10 21:35:08 -08:00