forked from Minki/linux
1758b35808
There is currently a fixed regulator in the .dtsi file for the MSM8660 chipset, used by the SURF board. We want to define real regulators for a board using this chipset, so push the fixed regulator down to the SURF board which is the only user. Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
378 lines
8.4 KiB
Plaintext
378 lines
8.4 KiB
Plaintext
/dts-v1/;
|
|
|
|
/include/ "skeleton.dtsi"
|
|
|
|
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
|
#include <dt-bindings/clock/qcom,gcc-msm8660.h>
|
|
#include <dt-bindings/soc/qcom,gsbi.h>
|
|
|
|
/ {
|
|
model = "Qualcomm MSM8660";
|
|
compatible = "qcom,msm8660";
|
|
interrupt-parent = <&intc>;
|
|
|
|
cpus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
cpu@0 {
|
|
compatible = "qcom,scorpion";
|
|
enable-method = "qcom,gcc-msm8660";
|
|
device_type = "cpu";
|
|
reg = <0>;
|
|
next-level-cache = <&L2>;
|
|
};
|
|
|
|
cpu@1 {
|
|
compatible = "qcom,scorpion";
|
|
enable-method = "qcom,gcc-msm8660";
|
|
device_type = "cpu";
|
|
reg = <1>;
|
|
next-level-cache = <&L2>;
|
|
};
|
|
|
|
L2: l2-cache {
|
|
compatible = "cache";
|
|
cache-level = <2>;
|
|
};
|
|
};
|
|
|
|
cpu-pmu {
|
|
compatible = "qcom,scorpion-mp-pmu";
|
|
interrupts = <1 9 0x304>;
|
|
};
|
|
|
|
clocks {
|
|
cxo_board {
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <19200000>;
|
|
};
|
|
|
|
pxo_board {
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <27000000>;
|
|
};
|
|
|
|
sleep_clk {
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <32768>;
|
|
};
|
|
};
|
|
|
|
soc: soc {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
compatible = "simple-bus";
|
|
|
|
intc: interrupt-controller@2080000 {
|
|
compatible = "qcom,msm-8660-qgic";
|
|
interrupt-controller;
|
|
#interrupt-cells = <3>;
|
|
reg = < 0x02080000 0x1000 >,
|
|
< 0x02081000 0x1000 >;
|
|
};
|
|
|
|
timer@2000000 {
|
|
compatible = "qcom,scss-timer", "qcom,msm-timer";
|
|
interrupts = <1 0 0x301>,
|
|
<1 1 0x301>,
|
|
<1 2 0x301>;
|
|
reg = <0x02000000 0x100>;
|
|
clock-frequency = <27000000>,
|
|
<32768>;
|
|
cpu-offset = <0x40000>;
|
|
};
|
|
|
|
tlmm: pinctrl@800000 {
|
|
compatible = "qcom,msm8660-pinctrl";
|
|
reg = <0x800000 0x4000>;
|
|
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupts = <0 16 0x4>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
|
|
};
|
|
|
|
gcc: clock-controller@900000 {
|
|
compatible = "qcom,gcc-msm8660";
|
|
#clock-cells = <1>;
|
|
#reset-cells = <1>;
|
|
reg = <0x900000 0x4000>;
|
|
};
|
|
|
|
gsbi12: gsbi@19c00000 {
|
|
compatible = "qcom,gsbi-v1.0.0";
|
|
cell-index = <12>;
|
|
reg = <0x19c00000 0x100>;
|
|
clocks = <&gcc GSBI12_H_CLK>;
|
|
clock-names = "iface";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
|
|
syscon-tcsr = <&tcsr>;
|
|
|
|
gsbi12_serial: serial@19c40000 {
|
|
compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
|
|
reg = <0x19c40000 0x1000>,
|
|
<0x19c00000 0x1000>;
|
|
interrupts = <0 195 IRQ_TYPE_NONE>;
|
|
clocks = <&gcc GSBI12_UART_CLK>, <&gcc GSBI12_H_CLK>;
|
|
clock-names = "core", "iface";
|
|
status = "disabled";
|
|
};
|
|
|
|
gsbi12_i2c: i2c@19c80000 {
|
|
compatible = "qcom,i2c-qup-v1.1.1";
|
|
reg = <0x19c80000 0x1000>;
|
|
interrupts = <0 196 IRQ_TYPE_NONE>;
|
|
clocks = <&gcc GSBI12_QUP_CLK>, <&gcc GSBI12_H_CLK>;
|
|
clock-names = "core", "iface";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
qcom,ssbi@500000 {
|
|
compatible = "qcom,ssbi";
|
|
reg = <0x500000 0x1000>;
|
|
qcom,controller-type = "pmic-arbiter";
|
|
|
|
pmicintc: pmic@0 {
|
|
compatible = "qcom,pm8058";
|
|
interrupt-parent = <&tlmm>;
|
|
interrupts = <88 8>;
|
|
#interrupt-cells = <2>;
|
|
interrupt-controller;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
pm8058_gpio: gpio@150 {
|
|
compatible = "qcom,pm8058-gpio",
|
|
"qcom,ssbi-gpio";
|
|
reg = <0x150>;
|
|
interrupt-parent = <&pmicintc>;
|
|
interrupts = <192 1>, <193 1>, <194 1>,
|
|
<195 1>, <196 1>, <197 1>,
|
|
<198 1>, <199 1>, <200 1>,
|
|
<201 1>, <202 1>, <203 1>,
|
|
<204 1>, <205 1>, <206 1>,
|
|
<207 1>, <208 1>, <209 1>,
|
|
<210 1>, <211 1>, <212 1>,
|
|
<213 1>, <214 1>, <215 1>,
|
|
<216 1>, <217 1>, <218 1>,
|
|
<219 1>, <220 1>, <221 1>,
|
|
<222 1>, <223 1>, <224 1>,
|
|
<225 1>, <226 1>, <227 1>,
|
|
<228 1>, <229 1>, <230 1>,
|
|
<231 1>, <232 1>, <233 1>,
|
|
<234 1>, <235 1>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
|
|
};
|
|
|
|
pm8058_mpps: mpps@50 {
|
|
compatible = "qcom,pm8058-mpp",
|
|
"qcom,ssbi-mpp";
|
|
reg = <0x50>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-parent = <&pmicintc>;
|
|
interrupts =
|
|
<128 1>, <129 1>, <130 1>, <131 1>,
|
|
<132 1>, <133 1>, <134 1>, <135 1>,
|
|
<136 1>, <137 1>, <138 1>, <139 1>;
|
|
};
|
|
|
|
pwrkey@1c {
|
|
compatible = "qcom,pm8058-pwrkey";
|
|
reg = <0x1c>;
|
|
interrupt-parent = <&pmicintc>;
|
|
interrupts = <50 1>, <51 1>;
|
|
debounce = <15625>;
|
|
pull-up;
|
|
};
|
|
|
|
keypad@148 {
|
|
compatible = "qcom,pm8058-keypad";
|
|
reg = <0x148>;
|
|
interrupt-parent = <&pmicintc>;
|
|
interrupts = <74 1>, <75 1>;
|
|
debounce = <15>;
|
|
scan-delay = <32>;
|
|
row-hold = <91500>;
|
|
};
|
|
|
|
rtc@1e8 {
|
|
compatible = "qcom,pm8058-rtc";
|
|
reg = <0x1e8>;
|
|
interrupt-parent = <&pmicintc>;
|
|
interrupts = <39 1>;
|
|
allow-set-time;
|
|
};
|
|
|
|
vibrator@4a {
|
|
compatible = "qcom,pm8058-vib";
|
|
reg = <0x4a>;
|
|
};
|
|
};
|
|
};
|
|
|
|
l2cc: clock-controller@2082000 {
|
|
compatible = "syscon";
|
|
reg = <0x02082000 0x1000>;
|
|
};
|
|
|
|
rpm: rpm@104000 {
|
|
compatible = "qcom,rpm-msm8660";
|
|
reg = <0x00104000 0x1000>;
|
|
qcom,ipc = <&l2cc 0x8 2>;
|
|
|
|
interrupts = <GIC_SPI 19 IRQ_TYPE_EDGE_RISING>,
|
|
<GIC_SPI 21 IRQ_TYPE_EDGE_RISING>,
|
|
<GIC_SPI 22 IRQ_TYPE_EDGE_RISING>;
|
|
interrupt-names = "ack", "err", "wakeup";
|
|
clocks = <&gcc RPM_MSG_RAM_H_CLK>;
|
|
clock-names = "ram";
|
|
|
|
rpmcc: clock-controller {
|
|
compatible = "qcom,rpmcc-apq8660", "qcom,rpmcc";
|
|
#clock-cells = <1>;
|
|
};
|
|
|
|
pm8901-regulators {
|
|
compatible = "qcom,rpm-pm8901-regulators";
|
|
|
|
pm8901_l0: l0 {};
|
|
pm8901_l1: l1 {};
|
|
pm8901_l2: l2 {};
|
|
pm8901_l3: l3 {};
|
|
pm8901_l4: l4 {};
|
|
pm8901_l5: l5 {};
|
|
pm8901_l6: l6 {};
|
|
|
|
/* S0 and S1 Handled as SAW regulators by SPM */
|
|
pm8901_s2: s2 {};
|
|
pm8901_s3: s3 {};
|
|
pm8901_s4: s4 {};
|
|
|
|
pm8901_lvs0: lvs0 {};
|
|
pm8901_lvs1: lvs1 {};
|
|
pm8901_lvs2: lvs2 {};
|
|
pm8901_lvs3: lvs3 {};
|
|
|
|
pm8901_mvs: mvs {};
|
|
};
|
|
|
|
pm8058-regulators {
|
|
compatible = "qcom,rpm-pm8058-regulators";
|
|
|
|
pm8058_l0: l0 {};
|
|
pm8058_l1: l1 {};
|
|
pm8058_l2: l2 {};
|
|
pm8058_l3: l3 {};
|
|
pm8058_l4: l4 {};
|
|
pm8058_l5: l5 {};
|
|
pm8058_l6: l6 {};
|
|
pm8058_l7: l7 {};
|
|
pm8058_l8: l8 {};
|
|
pm8058_l9: l9 {};
|
|
pm8058_l10: l10 {};
|
|
pm8058_l11: l11 {};
|
|
pm8058_l12: l12 {};
|
|
pm8058_l13: l13 {};
|
|
pm8058_l14: l14 {};
|
|
pm8058_l15: l15 {};
|
|
pm8058_l16: l16 {};
|
|
pm8058_l17: l17 {};
|
|
pm8058_l18: l18 {};
|
|
pm8058_l19: l19 {};
|
|
pm8058_l20: l20 {};
|
|
pm8058_l21: l21 {};
|
|
pm8058_l22: l22 {};
|
|
pm8058_l23: l23 {};
|
|
pm8058_l24: l24 {};
|
|
pm8058_l25: l25 {};
|
|
|
|
pm8058_s0: s0 {};
|
|
pm8058_s1: s1 {};
|
|
pm8058_s2: s2 {};
|
|
pm8058_s3: s3 {};
|
|
pm8058_s4: s4 {};
|
|
|
|
pm8058_lvs0: lvs0 {};
|
|
pm8058_lvs1: lvs1 {};
|
|
|
|
pm8058_ncp: ncp {};
|
|
};
|
|
};
|
|
|
|
amba {
|
|
compatible = "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
sdcc1: sdcc@12400000 {
|
|
status = "disabled";
|
|
compatible = "arm,pl18x", "arm,primecell";
|
|
arm,primecell-periphid = <0x00051180>;
|
|
reg = <0x12400000 0x8000>;
|
|
interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-names = "cmd_irq";
|
|
clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>;
|
|
clock-names = "mclk", "apb_pclk";
|
|
bus-width = <8>;
|
|
max-frequency = <48000000>;
|
|
non-removable;
|
|
cap-sd-highspeed;
|
|
cap-mmc-highspeed;
|
|
};
|
|
|
|
sdcc3: sdcc@12180000 {
|
|
compatible = "arm,pl18x", "arm,primecell";
|
|
arm,primecell-periphid = <0x00051180>;
|
|
status = "disabled";
|
|
reg = <0x12180000 0x8000>;
|
|
interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-names = "cmd_irq";
|
|
clocks = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>;
|
|
clock-names = "mclk", "apb_pclk";
|
|
bus-width = <4>;
|
|
cap-sd-highspeed;
|
|
cap-mmc-highspeed;
|
|
max-frequency = <48000000>;
|
|
no-1-8-v;
|
|
};
|
|
|
|
sdcc5: sdcc@12200000 {
|
|
compatible = "arm,pl18x", "arm,primecell";
|
|
arm,primecell-periphid = <0x00051180>;
|
|
status = "disabled";
|
|
reg = <0x12200000 0x8000>;
|
|
interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-names = "cmd_irq";
|
|
clocks = <&gcc SDC5_CLK>, <&gcc SDC5_H_CLK>;
|
|
clock-names = "mclk", "apb_pclk";
|
|
bus-width = <4>;
|
|
cap-sd-highspeed;
|
|
cap-mmc-highspeed;
|
|
max-frequency = <48000000>;
|
|
};
|
|
};
|
|
|
|
tcsr: syscon@1a400000 {
|
|
compatible = "qcom,tcsr-msm8660", "syscon";
|
|
reg = <0x1a400000 0x100>;
|
|
};
|
|
};
|
|
|
|
};
|