linux/arch/arm/boot/dts/qcom-msm8660.dtsi

/dts-v1/;

/include/ "skeleton.dtsi"

#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/qcom,gcc-msm8660.h>
#include <dt-bindings/soc/qcom,gsbi.h>

/ {
	model = "Qualcomm MSM8660";
	compatible = "qcom,msm8660";
	interrupt-parent = <&intc>;

	cpus {
		#address-cells = <1>;
		#size-cells = <0>;

		cpu@0 {
			compatible = "qcom,scorpion";
			enable-method = "qcom,gcc-msm8660";
			device_type = "cpu";
			reg = <0>;
			next-level-cache = <&L2>;
		};

		cpu@1 {
			compatible = "qcom,scorpion";
			enable-method = "qcom,gcc-msm8660";
			device_type = "cpu";
			reg = <1>;
			next-level-cache = <&L2>;
		};

		L2: l2-cache {
			compatible = "cache";
			cache-level = <2>;
		};
	};

	cpu-pmu {
		compatible = "qcom,scorpion-mp-pmu";
		interrupts = <1 9 0x304>;
	};

	clocks {
		cxo_board {
			compatible = "fixed-clock";
			#clock-cells = <0>;
			clock-frequency = <19200000>;
		};

		pxo_board {
			compatible = "fixed-clock";
			#clock-cells = <0>;
			clock-frequency = <27000000>;
		};

		sleep_clk {
			compatible = "fixed-clock";
			#clock-cells = <0>;
			clock-frequency = <32768>;
		};
	};

	soc: soc {
		#address-cells = <1>;
		#size-cells = <1>;
		ranges;
		compatible = "simple-bus";

		intc: interrupt-controller@2080000 {
			compatible = "qcom,msm-8660-qgic";
			interrupt-controller;
			#interrupt-cells = <3>;
			reg = < 0x02080000 0x1000 >,
			      < 0x02081000 0x1000 >;
		};

		timer@2000000 {
			compatible = "qcom,scss-timer", "qcom,msm-timer";
			interrupts = <1 0 0x301>,
				     <1 1 0x301>,
				     <1 2 0x301>;
			reg = <0x02000000 0x100>;
			clock-frequency = <27000000>,
					  <32768>;
			cpu-offset = <0x40000>;
		};

		tlmm: pinctrl@800000 {
			compatible = "qcom,msm8660-pinctrl";
			reg = <0x800000 0x4000>;

			gpio-controller;
			#gpio-cells = <2>;
			interrupts = <0 16 0x4>;
			interrupt-controller;
			#interrupt-cells = <2>;

		};

		gcc: clock-controller@900000 {
			compatible = "qcom,gcc-msm8660";
			#clock-cells = <1>;
			#reset-cells = <1>;
			reg = <0x900000 0x4000>;
		};

		gsbi12: gsbi@19c00000 {
			compatible = "qcom,gsbi-v1.0.0";
			cell-index = <12>;
			reg = <0x19c00000 0x100>;
			clocks = <&gcc GSBI12_H_CLK>;
			clock-names = "iface";
			#address-cells = <1>;
			#size-cells = <1>;
			ranges;

			syscon-tcsr = <&tcsr>;

			gsbi12_serial: serial@19c40000 {
				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
				reg = <0x19c40000 0x1000>,
				      <0x19c00000 0x1000>;
				interrupts = <0 195 IRQ_TYPE_NONE>;
				clocks = <&gcc GSBI12_UART_CLK>, <&gcc GSBI12_H_CLK>;
				clock-names = "core", "iface";
				status = "disabled";
			};

			gsbi12_i2c: i2c@19c80000 {
				compatible = "qcom,i2c-qup-v1.1.1";
				reg = <0x19c80000 0x1000>;
				interrupts = <0 196 IRQ_TYPE_NONE>;
				clocks = <&gcc GSBI12_QUP_CLK>, <&gcc GSBI12_H_CLK>;
				clock-names = "core", "iface";
				#address-cells = <1>;
				#size-cells = <0>;
				status = "disabled";
			};
		};

		qcom,ssbi@500000 {
			compatible = "qcom,ssbi";
			reg = <0x500000 0x1000>;
			qcom,controller-type = "pmic-arbiter";

			pmicintc: pmic@0 {
				compatible = "qcom,pm8058";
				interrupt-parent = <&tlmm>;
				interrupts = <88 8>;
				#interrupt-cells = <2>;
				interrupt-controller;
				#address-cells = <1>;
				#size-cells = <0>;

				pm8058_gpio: gpio@150 {
					compatible = "qcom,pm8058-gpio",
						     "qcom,ssbi-gpio";
					reg = <0x150>;
					interrupt-parent = <&pmicintc>;
					interrupts = <192 1>, <193 1>, <194 1>,
						     <195 1>, <196 1>, <197 1>,
						     <198 1>, <199 1>, <200 1>,
						     <201 1>, <202 1>, <203 1>,
						     <204 1>, <205 1>, <206 1>,
						     <207 1>, <208 1>, <209 1>,
						     <210 1>, <211 1>, <212 1>,
						     <213 1>, <214 1>, <215 1>,
						     <216 1>, <217 1>, <218 1>,
						     <219 1>, <220 1>, <221 1>,
						     <222 1>, <223 1>, <224 1>,
						     <225 1>, <226 1>, <227 1>,
						     <228 1>, <229 1>, <230 1>,
						     <231 1>, <232 1>, <233 1>,
						     <234 1>, <235 1>;
					gpio-controller;
					#gpio-cells = <2>;

				};

				pm8058_mpps: mpps@50 {
					compatible = "qcom,pm8058-mpp",
						     "qcom,ssbi-mpp";
					reg = <0x50>;
					gpio-controller;
					#gpio-cells = <2>;
					interrupt-parent = <&pmicintc>;
					interrupts =
					<128 1>, <129 1>, <130 1>, <131 1>,
					<132 1>, <133 1>, <134 1>, <135 1>,
					<136 1>, <137 1>, <138 1>, <139 1>;
				};

				pwrkey@1c {
					compatible = "qcom,pm8058-pwrkey";
					reg = <0x1c>;
					interrupt-parent = <&pmicintc>;
					interrupts = <50 1>, <51 1>;
					debounce = <15625>;
					pull-up;
				};

				keypad@148 {
					compatible = "qcom,pm8058-keypad";
					reg = <0x148>;
					interrupt-parent = <&pmicintc>;
					interrupts = <74 1>, <75 1>;
					debounce = <15>;
					scan-delay = <32>;
					row-hold = <91500>;
				};

				rtc@1e8 {
					compatible = "qcom,pm8058-rtc";
					reg = <0x1e8>;
					interrupt-parent = <&pmicintc>;
					interrupts = <39 1>;
					allow-set-time;
				};

				vibrator@4a {
					compatible = "qcom,pm8058-vib";
					reg = <0x4a>;
				};
			};
		};

		l2cc: clock-controller@2082000 {
			compatible	= "syscon";
			reg		= <0x02082000 0x1000>;
		};

		rpm: rpm@104000 {
			compatible	= "qcom,rpm-msm8660";
			reg		= <0x00104000 0x1000>;
			qcom,ipc	= <&l2cc 0x8 2>;

			interrupts	= <GIC_SPI 19 IRQ_TYPE_EDGE_RISING>,
					  <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>,
					  <GIC_SPI 22 IRQ_TYPE_EDGE_RISING>;
			interrupt-names	= "ack", "err", "wakeup";
			clocks = <&gcc RPM_MSG_RAM_H_CLK>;
			clock-names = "ram";

			rpmcc: clock-controller {
				compatible	= "qcom,rpmcc-apq8660", "qcom,rpmcc";
				#clock-cells = <1>;
			};

			pm8901-regulators {
				compatible = "qcom,rpm-pm8901-regulators";

				pm8901_l0: l0 {};
				pm8901_l1: l1 {};
				pm8901_l2: l2 {};
				pm8901_l3: l3 {};
				pm8901_l4: l4 {};
				pm8901_l5: l5 {};
				pm8901_l6: l6 {};

				/* S0 and S1 Handled as SAW regulators by SPM */
				pm8901_s2: s2 {};
				pm8901_s3: s3 {};
				pm8901_s4: s4 {};

				pm8901_lvs0: lvs0 {};
				pm8901_lvs1: lvs1 {};
				pm8901_lvs2: lvs2 {};
				pm8901_lvs3: lvs3 {};

				pm8901_mvs: mvs {};
			};

			pm8058-regulators {
				compatible = "qcom,rpm-pm8058-regulators";

				pm8058_l0: l0 {};
				pm8058_l1: l1 {};
				pm8058_l2: l2 {};
				pm8058_l3: l3 {};
				pm8058_l4: l4 {};
				pm8058_l5: l5 {};
				pm8058_l6: l6 {};
				pm8058_l7: l7 {};
				pm8058_l8: l8 {};
				pm8058_l9: l9 {};
				pm8058_l10: l10 {};
				pm8058_l11: l11 {};
				pm8058_l12: l12 {};
				pm8058_l13: l13 {};
				pm8058_l14: l14 {};
				pm8058_l15: l15 {};
				pm8058_l16: l16 {};
				pm8058_l17: l17 {};
				pm8058_l18: l18 {};
				pm8058_l19: l19 {};
				pm8058_l20: l20 {};
				pm8058_l21: l21 {};
				pm8058_l22: l22 {};
				pm8058_l23: l23 {};
				pm8058_l24: l24 {};
				pm8058_l25: l25 {};

				pm8058_s0: s0 {};
				pm8058_s1: s1 {};
				pm8058_s2: s2 {};
				pm8058_s3: s3 {};
				pm8058_s4: s4 {};

				pm8058_lvs0: lvs0 {};
				pm8058_lvs1: lvs1 {};

				pm8058_ncp: ncp {};
			};
		};

		amba {
			compatible = "simple-bus";
			#address-cells = <1>;
			#size-cells = <1>;
			ranges;
			sdcc1: sdcc@12400000 {
				status		= "disabled";
				compatible	= "arm,pl18x", "arm,primecell";
				arm,primecell-periphid = <0x00051180>;
				reg		= <0x12400000 0x8000>;
				interrupts	= <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
				interrupt-names	= "cmd_irq";
				clocks		= <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>;
				clock-names	= "mclk", "apb_pclk";
				bus-width	= <8>;
				max-frequency	= <48000000>;
				non-removable;
				cap-sd-highspeed;
				cap-mmc-highspeed;
			};

			sdcc3: sdcc@12180000 {
				compatible	= "arm,pl18x", "arm,primecell";
				arm,primecell-periphid = <0x00051180>;
				status		= "disabled";
				reg		= <0x12180000 0x8000>;
				interrupts	= <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
				interrupt-names	= "cmd_irq";
				clocks		= <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>;
				clock-names	= "mclk", "apb_pclk";
				bus-width	= <4>;
				cap-sd-highspeed;
				cap-mmc-highspeed;
				max-frequency	= <48000000>;
				no-1-8-v;
			};

			sdcc5: sdcc@12200000 {
				compatible	= "arm,pl18x", "arm,primecell";
				arm,primecell-periphid = <0x00051180>;
				status		= "disabled";
				reg		= <0x12200000 0x8000>;
				interrupts	= <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
				interrupt-names	= "cmd_irq";
				clocks		= <&gcc SDC5_CLK>, <&gcc SDC5_H_CLK>;
				clock-names	= "mclk", "apb_pclk";
				bus-width	= <4>;
				cap-sd-highspeed;
				cap-mmc-highspeed;
				max-frequency	= <48000000>;
			};
		};

		tcsr: syscon@1a400000 {
			compatible = "qcom,tcsr-msm8660", "syscon";
			reg = <0x1a400000 0x100>;
		};
	};

};