Akinobu Mita 4744d4e2af iio: adc: ti-ads1015: add adequate wait time to get correct conversion ... This driver assumes that the device is operating in the continuous conversion mode which performs the conversion continuously. So this driver inserts a wait time before reading the conversion register if the configuration is changed from a previous request. Currently, the wait time is only the period required for a single conversion that is calculated as the reciprocal of the sampling frequency. However we also need to wait for the the previous conversion to complete. Otherwise we probably get the conversion result for the previous configuration when the sampling frequency is lower. Cc: Daniel Baluta <daniel.baluta@gmail.com> Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>		2017-08-20 15:41:14 +01:00
..
accel	iio: accel: bma180: constify i2c_device_id	2017-08-20 10:15:45 +01:00
adc	iio: adc: ti-ads1015: add adequate wait time to get correct conversion	2017-08-20 15:41:14 +01:00
amplifiers
buffer	iio: buffer-dmaengine: Add missing header buffer_impl.h	2017-06-13 20:56:05 +01:00
chemical	iio: chemical: ccs811: Add triggered buffer support	2017-08-18 08:08:02 +01:00
common	iio: common: st_sensors: move st_sensors_of_i2c_probe() in common code	2017-07-01 10:16:56 +01:00
counter	iio: pc104: Mask PC/104 drivers via the PC104 Kconfig option	2017-03-15 21:59:08 +00:00
dac	iio: dac: stm32: add support for stm32f4	2017-07-15 12:26:26 +01:00
dummy	iio:dummy: Stop enabling timestamp by default.	2017-01-10 19:54:55 +00:00
frequency
gyro	iio: gyro: st_gyro_spi: add OF capability to st_gyro_spi	2017-07-02 10:24:56 +01:00
health	First set of IIO new device support, features and cleanup for the 4.12 cycle.	2017-03-06 13:17:21 +01:00
humidity	iio: humidity: hts221: move drdy enable logic in hts221_trig_set_state()	2017-07-25 20:03:04 +01:00
imu	iio: adis16400: Change unsigned to unsigned int	2017-07-02 10:27:03 +01:00
light	iio: light: tsl2583: constify i2c_device_id	2017-08-20 10:17:23 +01:00
magnetometer	iio: magnetometer: ak8974: debug AMI306 calibration data	2017-08-20 15:41:11 +01:00
multiplexer	iio: multiplexer: new iio category and iio-mux driver	2017-06-03 19:29:26 +09:00
orientation	iio: orientation: hid-sensor-rotation: Drop unnecessary static	2017-07-17 21:45:01 +01:00
potentiometer	iio: max5481: Add support for Maxim digital potentiometers	2017-01-28 12:13:31 +00:00
potentiostat	iio: lmp91000: Set parent device	2017-02-19 12:01:52 +00:00
pressure	iio: pressure: st_pressure: fix drdy configuration for LPS22HB and LPS25H	2017-08-12 13:46:32 +01:00
proximity	iio: srf08: add support for srf02 in i2c mode	2017-08-18 08:04:17 +01:00
temperature	iio: temperature: tsys01: Add OF match table	2017-07-01 10:16:42 +01:00
trigger	iio: trigger: stm32-timer: add output compare triggers	2017-08-12 13:05:27 +01:00
iio_core_trigger.h
iio_core.h	iio:core: timestamping clock selection support	2016-06-30 19:41:38 +01:00
industrialio-buffer.c	sched/headers: Prepare to move signal wakeup & sigpending methods from <linux/sched.h> into <linux/sched/signal.h>	2017-03-02 08:42:32 +01:00
industrialio-configfs.c
industrialio-core.c	iio: add hardware triggered operating mode	2017-06-11 15:58:41 +01:00
industrialio-event.c	iio: iio_push_event(): Don't crash if the event interface is not registered	2016-09-10 16:40:44 +01:00
industrialio-sw-device.c	iio: Add support for creating IIO devices via configfs	2016-05-04 11:43:54 +01:00
industrialio-sw-trigger.c
industrialio-trigger.c	iio: trigger: fix NULL pointer dereference in iio_trigger_write_current()	2017-05-21 12:36:59 +01:00
industrialio-triggered-event.c
inkern.c	First round of IIO new device support, features and cleanups for the 4.14 cycle.	2017-07-27 21:29:49 -07:00
Kconfig	iio: multiplexer: new iio category and iio-mux driver	2017-06-03 19:29:26 +09:00
Makefile	iio: multiplexer: new iio category and iio-mux driver	2017-06-03 19:29:26 +09:00