leandrof/linux
1
0
Fork 0
forked from Minki/linux
Code Issues Pull Requests Packages Projects Releases Wiki Activity
3ff51ed828
linux/arch/arm/mach-omap2
History
Jon Hunter 3ff51ed828 ARM: OMAP4: Enhance support for DPLLs with 4X multiplier 
On OMAP4 devices, the ABE DPLL has an internal 4X multiplier that can
be enabled or disabled in addition to the standard configurable
multiplier (M) for OMAP DPLLs. When configuring the ABE DPLL the 4X
multiplier is accounted for by checking to see whether it is enabled or
not. However, when calculating a new rate we only check to see if the
rate can be achieved with the current setting for the 4X multiplier.
Enhance the round_rate() function for such DPLLs to see if the rate
can be achieved with the 4X multiplier if it cannot be achieved without
the 4X multiplier.

This change is necessary, because when using the 32kHz clock as the
source clock for the ABE DPLL, the default DPLL frequency for the ABE
DPLL cannot be achieved without enabling the 4X multiplier.

When using the 32kHz clock as the source clock for the ABE DPLL and
attempting to lock the DPLL to 98.304MHz (default frequency), it was
found that the DPLL would fail to lock if the low-power mode for the DPLL
was not enabled. From reviewing boot-loader settings that configure the
ABE DPLL it was found that the low-power mode is enabled when using the
32kHz clock source, however, the documentation for OMAP does not state
that this is a requirement. Therefore, introduce a new function for
OMAP4 devices to see if low-power mode can be enabled when calculating a
new rate to ensure the DPLL will lock.

New variables for the last calculated 4X multiplier and low-power
setting have been added to the dpll data structure as well as variables
defining the bit mask for enabling these features via the DPLL's
control_reg. It is possible that we could eliminate these bit masks from
the dpll data structure as these bit masks are not unique to OMAP4, if
it is preferred.

The function omap3_noncore_program_dpll() has been updated to avoid
passing the calculated values for the multiplier (M) and divider (N) as
these are stored in the clk structure.

Signed-off-by: Jon Hunter <jon-hunter@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
2012-12-15 01:35:46 -07:00
..
include/mach ARM: OMAP: Remove NEED_MACH_GPIO_H 2012-11-02 12:00:36 -07:00
am33xx.h ARM: OMAP2+: common: remove mach-omap2/common.c globals and map_common_io code 2012-11-08 12:33:07 -07:00
am35xx-emac.c ARM: OMAP: Make omap_device local to mach-omap2 2012-10-17 12:08:40 -07:00
am35xx-emac.h
am35xx.h ARM: OMAP2+: Make am35xx.h local 2012-09-20 15:02:23 -07:00
board-2430sdp.c omap prcm changes via Paul Walmsley <paul@pwsan.com>: 2012-11-30 08:40:31 -08:00
board-3430sdp.c ARM: OMAP: Move plat-omap/dma-omap.h to include/linux/omap-dma.h 2012-11-30 08:41:50 -08:00
board-3630sdp.c ARM: OMAP2+: board files: use SoC-specific system restart functions 2012-11-08 12:33:08 -07:00
board-4430sdp.c ARM: arm-soc: Board updates for 3.8 2012-12-12 12:14:06 -08:00
board-am3517crane.c ARM: OMAP2+: board files: use SoC-specific system restart functions 2012-11-08 12:33:08 -07:00
board-am3517evm.c ARM: OMAP2+: board files: use SoC-specific system restart functions 2012-11-08 12:33:08 -07:00
board-apollon.c ARM: OMAP2+: board files: use SoC-specific system restart functions 2012-11-08 12:33:08 -07:00
board-cm-t35.c omap prcm changes via Paul Walmsley <paul@pwsan.com>: 2012-11-30 08:40:31 -08:00
board-cm-t3517.c Timer clean-up to get us closer to moving timer code to drivers, 2012-11-29 22:30:11 -08:00
board-devkit8000.c ARM: OMAP2+: board files: use SoC-specific system restart functions 2012-11-08 12:33:08 -07:00
board-flash.c ARM: OMAP: Split plat/cpu.h into local soc.h for mach-omap1 and mach-omap2 2012-10-18 16:23:46 -07:00
board-flash.h ARM: OMAP2+: gpmc: localize gpmc header 2012-10-15 14:42:15 +05:30
board-generic.c ARM: arm-soc: Board updates for 3.8 2012-12-12 12:14:06 -08:00
board-h4.c ARM: OMAP: Move plat-omap/dma-omap.h to include/linux/omap-dma.h 2012-11-30 08:41:50 -08:00
board-igep0020.c ARM: arm-soc: Header cleanups 2012-12-12 11:45:16 -08:00
board-ldp.c ARM: OMAP2+: board files: use SoC-specific system restart functions 2012-11-08 12:33:08 -07:00
board-n8x0.c ARM: OMAP2+: board files: use SoC-specific system restart functions 2012-11-08 12:33:08 -07:00
board-omap3beagle.c Merge branch 'omap/cleanup-prcm-part2' into next/dt 2012-11-15 17:59:54 +01:00
board-omap3evm.c ARM: OMAP2+: board files: use SoC-specific system restart functions 2012-11-08 12:33:08 -07:00
board-omap3logic.c ARM: OMAP2+: board files: use SoC-specific system restart functions 2012-11-08 12:33:08 -07:00
board-omap3pandora.c ARM: OMAP2+: board files: use SoC-specific system restart functions 2012-11-08 12:33:08 -07:00
board-omap3stalker.c ARM: OMAP2+: board files: use SoC-specific system restart functions 2012-11-08 12:33:08 -07:00
board-omap3touchbook.c ARM: OMAP2+: board files: use SoC-specific system restart functions 2012-11-08 12:33:08 -07:00
board-omap4panda.c ARM: arm-soc: Board updates for 3.8 2012-12-12 12:14:06 -08:00
board-overo.c ARM: arm-soc: Header cleanups 2012-12-12 11:45:16 -08:00
board-rm680.c ARM: arm-soc: Board updates for 3.8 2012-12-12 12:14:06 -08:00
board-rx51-peripherals.c ARM: OMAP: Move plat-omap/dma-omap.h to include/linux/omap-dma.h 2012-11-30 08:41:50 -08:00
board-rx51-video.c ARM: OMAP2+: Make board-rx51.h local 2012-09-20 15:02:27 -07:00
board-rx51.c ARM: arm-soc: power management and clock changes 2012-12-13 10:58:20 -08:00
board-rx51.h ARM: OMAP2+: Make board-rx51.h local 2012-09-20 15:02:27 -07:00
board-ti8168evm.c ARM: OMAP2+: board files: use SoC-specific system restart functions 2012-11-08 12:33:08 -07:00
board-zoom-debugboard.c ARM: OMAP2+: Make board-zoom.h local 2012-10-17 11:36:46 -07:00
board-zoom-display.c ARM: OMAP: Split plat/cpu.h into local soc.h for mach-omap1 and mach-omap2 2012-10-18 16:23:46 -07:00
board-zoom-peripherals.c Merge branch 'omap-for-v3.8/cleanup-headers-usb' into omap-for-v3.8/cleanup-headers 2012-10-24 15:05:45 -07:00
board-zoom.c ARM: OMAP2+: board files: use SoC-specific system restart functions 2012-11-08 12:33:08 -07:00
board-zoom.h ARM: OMAP2+: Make board-zoom.h local 2012-10-17 11:36:46 -07:00
cclock3xxx_data.c ARM: OMAP3: clock: Add 3xxx data using common struct clk 2012-11-12 19:18:49 -07:00
cclock33xx_data.c ARM: AM33XX: clock: add clock data in common clock format 2012-11-12 19:18:49 -07:00
cclock44xx_data.c ARM: OMAP4: Enhance support for DPLLs with 4X multiplier 2012-12-15 01:35:46 -07:00
cclock2420_data.c ARM: OMAP2: clock: Add 24xx data using common struct clk 2012-11-12 19:18:49 -07:00
cclock2430_data.c ARM: OMAP2: clock: Add 24xx data using common struct clk 2012-11-12 19:18:49 -07:00
clkt2xxx_apll.c ARM: OMAP2: clock: Cleanup !CONFIG_COMMON_CLK parts 2012-11-12 19:18:51 -07:00
clkt2xxx_dpll.c ARM: OMAP2: clock: Cleanup !CONFIG_COMMON_CLK parts 2012-11-12 19:18:51 -07:00
clkt2xxx_dpllcore.c omap prcm changes via Paul Walmsley <paul@pwsan.com>: 2012-11-30 08:40:31 -08:00
clkt2xxx_osc.c ARM: OMAP2: clock: Cleanup !CONFIG_COMMON_CLK parts 2012-11-12 19:18:51 -07:00
clkt2xxx_sys.c ARM: OMAP2: clock: Cleanup !CONFIG_COMMON_CLK parts 2012-11-12 19:18:51 -07:00
clkt2xxx_virt_prcm_set.c omap prcm changes via Paul Walmsley <paul@pwsan.com>: 2012-11-30 08:40:31 -08:00
clkt34xx_dpll3m2.c omap prcm changes via Paul Walmsley <paul@pwsan.com>: 2012-11-30 08:40:31 -08:00
clkt_clksel.c ARM: OMAP2+: clock: Cleanup !CONFIG_COMMON_CLK parts 2012-11-12 19:18:51 -07:00
clkt_dpll.c ARM: OMAP2+: clock: Cleanup !CONFIG_COMMON_CLK parts 2012-11-12 19:18:51 -07:00
clkt_iclk.c ARM: OMAP2+: clock: Cleanup !CONFIG_COMMON_CLK parts 2012-11-12 19:18:51 -07:00
clock2xxx.c ARM: OMAP2: clock: Convert to common clk 2012-11-12 19:10:18 -07:00
clock2xxx.h ARM: OMAP2: clock: Cleanup !CONFIG_COMMON_CLK parts 2012-11-12 19:18:51 -07:00
clock3xxx.c ARM: OMAP3: clock: Cleanup !CONFIG_COMMON_CLK parts 2012-11-12 19:18:50 -07:00
clock3xxx.h ARM: OMAP3: clock: Cleanup !CONFIG_COMMON_CLK parts 2012-11-12 19:18:50 -07:00
clock34xx.c ARM: OMAP3: clock: Cleanup !CONFIG_COMMON_CLK parts 2012-11-12 19:18:50 -07:00
clock34xx.h
clock36xx.c ARM: OMAP3: clock: Cleanup !CONFIG_COMMON_CLK parts 2012-11-12 19:18:50 -07:00
clock36xx.h ARM: OMAP3: clock: Cleanup !CONFIG_COMMON_CLK parts 2012-11-12 19:18:50 -07:00
clock44xx.h
clock2430.c ARM: OMAP2: clock: Cleanup !CONFIG_COMMON_CLK parts 2012-11-12 19:18:51 -07:00
clock3517.c ARM: OMAP3: clock: Cleanup !CONFIG_COMMON_CLK parts 2012-11-12 19:18:50 -07:00
clock3517.h
clock_common_data.c ARM: OMAP2+: clock: Cleanup !CONFIG_COMMON_CLK parts 2012-11-12 19:18:51 -07:00
clock.c ARM: OMAP2+: clock: Cleanup !CONFIG_COMMON_CLK parts 2012-11-12 19:18:51 -07:00
clock.h ARM: OMAP4: Enhance support for DPLLs with 4X multiplier 2012-12-15 01:35:46 -07:00
clockdomain.c ARM: OMAP2+: clock: Cleanup !CONFIG_COMMON_CLK parts 2012-11-12 19:18:51 -07:00
clockdomain.h ARM: OMAP: Split plat/cpu.h into local soc.h for mach-omap1 and mach-omap2 2012-10-18 16:23:46 -07:00
clockdomains2xxx_3xxx_data.c ARM: OMAP2+: hwmod code/clockdomain data: fix 32K sync timer 2012-07-05 17:25:38 -07:00
clockdomains3xxx_data.c ARM: OMAP: Split plat/cpu.h into local soc.h for mach-omap1 and mach-omap2 2012-10-18 16:23:46 -07:00
clockdomains33xx_data.c ARM: OMAP AM33xx: clockdomains: Add clockdomain data and respective operations 2012-06-18 12:08:06 -06:00
clockdomains44xx_data.c ARM: OMAP2+: clockdomain: Fix OMAP4 ISS clk domain to support only SWSUP 2012-10-29 22:02:13 -06:00
clockdomains2420_data.c ARM: OMAP: Split plat/cpu.h into local soc.h for mach-omap1 and mach-omap2 2012-10-18 16:23:46 -07:00
clockdomains2430_data.c ARM: OMAP: Split plat/cpu.h into local soc.h for mach-omap1 and mach-omap2 2012-10-18 16:23:46 -07:00
cm1_44xx.h
cm2_44xx.h
cm2xxx_3xxx.h ARM: OMAP3: clock: Add 3xxx data using common struct clk 2012-11-12 19:18:49 -07:00
cm2xxx.c ARM: OMAP2+: CM/clock: convert _omap2_module_wait_ready() to use SoC-independent CM functions 2012-11-08 12:33:08 -07:00
cm2xxx.h ARM: OMAP2+: CM/clock: convert _omap2_module_wait_ready() to use SoC-independent CM functions 2012-11-08 12:33:08 -07:00
cm3xxx.c ARM: OMAP2+: CM/clock: convert _omap2_module_wait_ready() to use SoC-independent CM functions 2012-11-08 12:33:08 -07:00
cm3xxx.h ARM: OMAP2+: CM/clock: convert _omap2_module_wait_ready() to use SoC-independent CM functions 2012-11-08 12:33:08 -07:00
cm33xx.c omap prcm changes via Paul Walmsley <paul@pwsan.com>: 2012-11-30 08:40:31 -08:00
cm33xx.h ARM: OMAP AM33xx: CM: Introduce AM33xx CM APIs and register level details 2012-06-18 12:08:06 -06:00
cm44xx.c
cm44xx.h
cm_common.c ARM: OMAP2: Fix compillation error in cm_common 2012-11-12 13:42:46 -08:00
cm-regbits-24xx.h ARM: OMAP2: clock: Add 24xx data using common struct clk 2012-11-12 19:18:49 -07:00
cm-regbits-33xx.h ARM: AM33XX: cm: Add bit-field width values 2012-09-22 10:53:08 -06:00
cm-regbits-34xx.h ARM: OMAP3: clock: Add 3xxx data using common struct clk 2012-11-12 19:18:49 -07:00
cm-regbits-44xx.h ARM: OMAP4: cm: add bitfield width values 2012-09-22 10:52:59 -06:00
cm.h ARM: OMAP2+: PRCM: split and relocate the PRM/CM globals setup 2012-11-08 15:09:26 -07:00
cminst44xx.c ARM: OMAP2/3: clockdomain/PRM/CM: move the low-level clockdomain functions into PRM/CM 2012-10-21 01:01:11 -06:00
cminst44xx.h ARM: OMAP2+: PRCM: split and relocate the PRM/CM globals setup 2012-11-08 15:09:26 -07:00
common-board-devices.c ARM: arm-soc: Header cleanups 2012-12-12 11:45:16 -08:00
common-board-devices.h ARM: OMAP2+: nand: unify init functions 2012-10-15 12:00:44 +05:30
common.c ARM: OMAP2+: common: remove mach-omap2/common.c globals and map_common_io code 2012-11-08 12:33:07 -07:00
common.h ARM: arm-soc: Cleanups on various subarchitectures 2012-12-12 11:51:39 -08:00
control.c ARM: OMAP2+: common: remove mach-omap2/common.c globals and map_common_io code 2012-11-08 12:33:07 -07:00
control.h Merge branch 'omap-for-v3.8/pm' into omap-for-v3.8/clock 2012-11-13 13:25:38 -08:00
cpuidle34xx.c ARM: OMAP2+: PRCM: remove obsolete prcm.[ch] 2012-11-08 15:09:26 -07:00
cpuidle44xx.c ARM: omap: allow building omap44xx without SMP 2012-08-23 17:16:42 +02:00
ctrl_module_core_44xx.h ARM: OMAP2+: Make ctrl_module_core_44xx.h local 2012-09-20 15:02:29 -07:00
ctrl_module_pad_core_44xx.h ARM: OMAP2+: Make ctrl_module_pad_core_44xx.h local 2012-09-20 15:02:30 -07:00
ctrl_module_pad_wkup_44xx.h ARM: OMAP2+: Make ctrl_module_pad_wkup_44xx.h local 2012-09-20 15:02:32 -07:00
ctrl_module_wkup_44xx.h ARM: OMAP2+: Make ctrl_module_wkup_44xx.h local 2012-09-20 15:02:33 -07:00
devices.c Merge branch 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media 2012-12-13 19:22:22 -08:00
devices.h
display.c ARM: OMAP2+: PRCM: consolidate PRCM-related timeout macros 2012-11-08 15:09:26 -07:00
display.h
dma.c ARM: OMAP: Move plat-omap/dma-omap.h to include/linux/omap-dma.h 2012-11-30 08:41:50 -08:00
dma.h ARM: OMAP2+: DMA: Moving OMAP2+ DMA channel definitions to mach-omap2 2012-10-15 14:03:51 -07:00
dpll3xxx.c ARM: OMAP4: Enhance support for DPLLs with 4X multiplier 2012-12-15 01:35:46 -07:00
dpll44xx.c ARM: OMAP4: Enhance support for DPLLs with 4X multiplier 2012-12-15 01:35:46 -07:00
drm.c ARM: arm-soc: Header cleanups 2012-12-12 11:45:16 -08:00
dsp.c ARM: OMAP: Make plat/omap-pm.h local to mach-omap2 2012-10-18 16:22:08 -07:00
dss-common.c OMAP: omap4sdp: move display init from board file to dss-common.c 2012-11-07 13:26:51 -08:00
dss-common.h OMAP: omap4sdp: move display init from board file to dss-common.c 2012-11-07 13:26:51 -08:00
emu.c ARM: OMAP: Split plat/hardware.h, use local soc.h for omap2+ 2012-09-12 18:06:31 -07:00
gpio.c ARM: OMAP: Make plat/omap-pm.h local to mach-omap2 2012-10-18 16:22:08 -07:00
gpmc-nand.c ARM: OMAP2+: nand: remove redundant rounding 2012-11-09 00:59:16 +05:30
gpmc-nand.h ARM: OMAP2+: gpmc: localize gpmc header 2012-10-15 14:42:15 +05:30
gpmc-onenand.c ARM: OMAP2+: onenand: generic timing calculation 2012-11-09 18:07:12 +05:30
gpmc-onenand.h ARM: OMAP2+: onenand: header cleanup 2012-10-15 14:42:03 +05:30
gpmc-smc91x.c ARM: OMAP2+: smc91x: generic timing calculation 2012-11-09 18:07:22 +05:30
gpmc-smc91x.h ARM: OMAP2+: Make gpmc-smc91x.h local 2012-09-20 15:02:49 -07:00
gpmc-smsc911x.c ARM: OMAP2+: gpmc: localize gpmc header 2012-10-15 14:42:15 +05:30
gpmc-smsc911x.h ARM: OMAP2+: Make gpmc-smsc911x.h local 2012-09-20 15:03:55 -07:00
gpmc.c ARM: OMAP2+: gpmc: generic timing calculation 2012-11-09 18:07:11 +05:30
gpmc.h ARM: OMAP2+: gpmc: generic timing calculation 2012-11-09 18:07:11 +05:30
hdq1w.c ARM: OMAP2+: PRCM: consolidate PRCM-related timeout macros 2012-11-08 15:09:26 -07:00
hdq1w.h ARM: OMAP: Make plat/omap_hwmod.h local to mach-omap2 2012-10-18 16:05:55 -07:00
hsmmc.c ARM: OMAP: Remove unnecessary mach and plat includes 2012-11-02 12:00:36 -07:00
hsmmc.h
hwspinlock.c ARM: OMAP: Make plat/omap_hwmod.h local to mach-omap2 2012-10-18 16:05:55 -07:00
i2c.c omap prcm changes via Paul Walmsley <paul@pwsan.com>: 2012-11-30 08:40:31 -08:00
i2c.h ARM: OMAP: Fix relative includes for shared i2c.h file 2012-10-31 15:37:13 -07:00
id.c omap prcm changes via Paul Walmsley <paul@pwsan.com>: 2012-11-30 08:40:31 -08:00
id.h ARM: OMAP2+: Make id.h local 2012-09-20 15:02:22 -07:00
io.c ARM: OMAP: Move plat-omap/dma-omap.h to include/linux/omap-dma.h 2012-11-30 08:41:50 -08:00
iomap.h ARM: OMAP5: Add minimal support for OMAP5430 SOC 2012-07-09 19:14:39 +05:30
irq.c These fixes are needed to fix non-omap build breakage for 2012-09-23 17:15:44 -06:00
Kconfig ARM: arm-soc: power management and clock changes 2012-12-13 10:58:20 -08:00
l3_2xxx.h ARM: OMAP2+: Make l3_2xxx.h local 2012-09-20 15:03:59 -07:00
l3_3xxx.h ARM: OMAP2+: Make l3_3xxx.h local 2012-09-20 15:04:00 -07:00
l4_2xxx.h ARM: OMAP2+: Make l4_2xxx.h local 2012-09-20 15:04:01 -07:00
l4_3xxx.h ARM: OMAP2+: Make l4_3xxx.h local 2012-09-20 15:04:03 -07:00
mailbox.c ARM: OMAP: Split plat/hardware.h, use local soc.h for omap2+ 2012-09-12 18:06:31 -07:00
Makefile ARM: arm-soc: power management and clock changes 2012-12-13 10:58:20 -08:00
Makefile.boot ARM: dtb: move all dtb targets to common Makefile 2012-09-20 22:58:17 -07:00
mcbsp.c ARM: OMAP: Move plat-omap/dma-omap.h to include/linux/omap-dma.h 2012-11-30 08:41:50 -08:00
mmc.h ARM: OMAP: Split plat/mmc.h into local headers and platform_data 2012-10-15 12:09:43 -07:00
msdi.c ARM: OMAP2+: PRCM: consolidate PRCM-related timeout macros 2012-11-08 15:09:26 -07:00
mux34xx.c ARM: OMAP3: Fix 3430 legacy mux names for ssi1 signals. 2012-10-22 13:37:37 -07:00
mux34xx.h
mux44xx.c
mux44xx.h
mux2420.c
mux2420.h
mux2430.c
mux2430.h
mux.c ARM: OMAP: Split plat/cpu.h into local soc.h for mach-omap1 and mach-omap2 2012-10-18 16:23:46 -07:00
mux.h omap2: mux: remove comment for nonexistent member 2012-08-07 03:58:02 -07:00
omap2-restart.c ARM: OMAP2+: PRCM: create SoC-specific chip restart functions 2012-11-08 12:33:08 -07:00
omap3-restart.c ARM: OMAP2+: PRCM: create SoC-specific chip restart functions 2012-11-08 12:33:08 -07:00
omap4-common.c ARM: arm-soc: Cleanups on various subarchitectures 2012-12-12 11:51:39 -08:00
omap4-keypad.h ARM: OMAP2+: Make omap4-keypad.h local 2012-09-20 15:04:04 -07:00
omap4-sar-layout.h ARM: OMAP5: Add the WakeupGen IP updates 2012-07-09 19:14:39 +05:30
omap24xx.h ARM: OMAP2+ Move SoC specific headers to be local to mach-omap2 2012-09-12 18:06:31 -07:00
omap34xx.h ARM: OMAP2+ Move SoC specific headers to be local to mach-omap2 2012-09-12 18:06:31 -07:00
omap44xx.h ARM: OMAP2+ Move SoC specific headers to be local to mach-omap2 2012-09-12 18:06:31 -07:00
omap54xx.h ARM: OMAP2+ Move SoC specific headers to be local to mach-omap2 2012-09-12 18:06:31 -07:00
omap_device.c ARM: OMAP2+: omap_device: Correct resource handling for DT boot 2012-11-21 16:15:18 -07:00
omap_device.h ARM: OMAP: Make plat/omap_hwmod.h local to mach-omap2 2012-10-18 16:05:55 -07:00
omap_hwmod_2xxx_3xxx_interconnect_data.c ARM: OMAP: Split plat/serial.h for omap1 and omap2+ 2012-10-24 13:34:31 -07:00
omap_hwmod_2xxx_3xxx_ipblock_data.c ARM: OMAP: Move plat-omap/dma-omap.h to include/linux/omap-dma.h 2012-11-30 08:41:50 -08:00
omap_hwmod_2xxx_interconnect_data.c ARM: OMAP: Split plat/serial.h for omap1 and omap2+ 2012-10-24 13:34:31 -07:00
omap_hwmod_2xxx_ipblock_data.c Remaining patches to allow omap2+ to build with multiplatform 2012-11-30 21:47:21 -08:00
omap_hwmod_3xxx_data.c ARM: arm-soc: power management and clock changes 2012-12-13 10:58:20 -08:00
omap_hwmod_33xx_data.c Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next 2012-12-12 18:07:07 -08:00
omap_hwmod_44xx_data.c ARM: arm-soc: power management and clock changes 2012-12-13 10:58:20 -08:00
omap_hwmod_2420_data.c Remaining patches to allow omap2+ to build with multiplatform 2012-11-30 21:47:21 -08:00
omap_hwmod_2430_data.c Remaining patches to allow omap2+ to build with multiplatform 2012-11-30 21:47:21 -08:00
omap_hwmod_common_data.c ARM: OMAP: Make plat/omap_hwmod.h local to mach-omap2 2012-10-18 16:05:55 -07:00
omap_hwmod_common_data.h ARM: OMAP: Make plat/omap_hwmod.h local to mach-omap2 2012-10-18 16:05:55 -07:00
omap_hwmod.c ARM: arm-soc: Merge branch 'next/clk' into next/pm 2012-12-12 16:10:00 -08:00
omap_hwmod.h ARM: arm-soc: Merge branch 'next/clk' into next/pm 2012-12-12 16:10:00 -08:00
omap_opp_data.h Merge branch 'omap-for-v3.8/pm' into omap-for-v3.8/clock 2012-11-13 13:25:38 -08:00
omap_phy_internal.c ARM: arm-soc: Merge branch 'next/clk' into next/pm 2012-12-12 16:10:00 -08:00
omap_twl.c Merge branch 'omap-for-v3.8/pm' into omap-for-v3.8/clock 2012-11-13 13:25:38 -08:00
omap-headsmp.S ARM: OMAP4460: Workaround for ROM bug because of CA9 r2pX GIC control register change. 2012-11-05 14:26:43 -08:00
omap-hotplug.c Merge branch 'multiplatform/smp_ops' into next/multiplatform 2012-09-22 00:16:04 -07:00
omap-iommu.c ARM: OMAP2+: Move iommu/iovmm headers to platform_data 2012-11-20 10:05:01 -08:00
omap-mpuss-lowpower.c ARM: arm-soc: Header cleanups 2012-12-12 11:45:16 -08:00
omap-pm-noop.c ARM: OMAP: Move omap-pm-noop.c local to mach-omap2 2012-10-31 15:37:13 -07:00
omap-pm.h ARM: OMAP: Make plat/omap-pm.h local to mach-omap2 2012-10-18 16:22:08 -07:00
omap-secure.c ARM: OMAP: Move plat/omap-secure.h locally to mach-omap2 2012-10-18 16:22:24 -07:00
omap-secure.h ARM: OMAP: Move plat/omap-secure.h locally to mach-omap2 2012-10-18 16:22:24 -07:00
omap-smc.S
omap-smp.c ARM: OMAP4: PM: fix errata handling when CONFIG_PM=n 2012-11-14 17:06:20 -08:00
omap-wakeupgen.c ARM: soc: general cleanups 2012-10-01 18:19:05 -07:00
omap-wakeupgen.h ARM: OMAP2+: Make omap-wakeupgen.h local 2012-09-20 15:02:37 -07:00
opp2xxx.h
opp3xxx_data.c ARM: OMAP: Split plat/cpu.h into local soc.h for mach-omap1 and mach-omap2 2012-10-18 16:23:46 -07:00
opp4xxx_data.c ARM: OMAP4: OPP: add OMAP4460 definitions 2012-11-05 15:31:49 -08:00
opp2420_data.c ARM: OMAP: Split plat/hardware.h, use local soc.h for omap2+ 2012-09-12 18:06:31 -07:00
opp2430_data.c ARM: OMAP: Split plat/hardware.h, use local soc.h for omap2+ 2012-09-12 18:06:31 -07:00
opp.c ARM: OMAP: Make omap_device local to mach-omap2 2012-10-17 12:08:40 -07:00
pm24xx.c ARM: OMAP: Move plat-omap/dma-omap.h to include/linux/omap-dma.h 2012-11-30 08:41:50 -08:00
pm34xx.c ARM: OMAP: Move plat-omap/dma-omap.h to include/linux/omap-dma.h 2012-11-30 08:41:50 -08:00
pm44xx.c ARM: arm-soc: Merge branch 'next/clk' into next/pm 2012-12-12 16:10:00 -08:00
pm-debug.c ARM: OMAP: Remove unnecessary inclusion of dmtimer.h 2012-11-16 10:35:08 -06:00
pm.c ARM: arm-soc: Merge branch 'next/clk' into next/pm 2012-12-12 16:10:00 -08:00
pm.h ARM: arm-soc: power management and clock changes 2012-12-13 10:58:20 -08:00
pmu.c ARM: arm-soc: Header cleanups 2012-12-12 11:45:16 -08:00
powerdomain-common.c
powerdomain.c ARM: OMAP2+: PRCM: remove obsolete prcm.[ch] 2012-11-08 15:09:26 -07:00
powerdomain.h ARM: OMAP: Split plat/cpu.h into local soc.h for mach-omap1 and mach-omap2 2012-10-18 16:23:46 -07:00
powerdomains2xxx_3xxx_data.c
powerdomains2xxx_3xxx_data.h
powerdomains2xxx_data.c ARM: OMAP: Split plat/cpu.h into local soc.h for mach-omap1 and mach-omap2 2012-10-18 16:23:46 -07:00
powerdomains3xxx_data.c ARM: OMAP: Split plat/hardware.h, use local soc.h for omap2+ 2012-09-12 18:06:31 -07:00
powerdomains33xx_data.c ARM: OMAP AM33xx: powerdomains: add AM335x support 2012-06-18 12:08:06 -06:00
powerdomains44xx_data.c
prcm44xx.h
prcm_mpu44xx.c ARM: OMAP2+: PRCM: split and relocate the PRM/CM globals setup 2012-11-08 15:09:26 -07:00
prcm_mpu44xx.h ARM: OMAP2+: PRCM: split and relocate the PRM/CM globals setup 2012-11-08 15:09:26 -07:00
prcm-common.h ARM: OMAP2+: PRCM: consolidate PRCM-related timeout macros 2012-11-08 15:09:26 -07:00
prm2xxx_3xxx.c ARM: OMAP2/3: clockdomain/PRM/CM: move the low-level clockdomain functions into PRM/CM 2012-10-21 01:01:11 -06:00
prm2xxx_3xxx.h ARM: OMAP3: clock: Add 3xxx data using common struct clk 2012-11-12 19:18:49 -07:00
prm2xxx.c ARM: OMAP2+: PRM: initialize some PRM functions early 2012-11-21 16:15:16 -07:00
prm2xxx.h ARM: OMAP2+: PRM: initialize some PRM functions early 2012-11-21 16:15:16 -07:00
prm3xxx.c ARM: OMAP2+: PRM: initialize some PRM functions early 2012-11-21 16:15:16 -07:00
prm3xxx.h ARM: OMAP2+: PRM: initialize some PRM functions early 2012-11-21 16:15:16 -07:00
prm33xx.c omap prcm changes via Paul Walmsley <paul@pwsan.com>: 2012-11-30 08:40:31 -08:00
prm33xx.h ARM: OMAP AM33xx: PRM: add PRM support 2012-06-18 12:08:06 -06:00
prm44xx.c ARM: OMAP2+: hwmod: Add support for per hwmod/module context lost count 2012-11-21 16:15:17 -07:00
prm44xx.h ARM: OMAP2+: PRM: initialize some PRM functions early 2012-11-21 16:15:16 -07:00
prm_common.c omap prcm changes via Paul Walmsley <paul@pwsan.com>: 2012-11-30 08:40:31 -08:00
prm-regbits-24xx.h ARM: OMAP2: clock: Add 24xx data using common struct clk 2012-11-12 19:18:49 -07:00
prm-regbits-33xx.h ARM: OMAP AM33xx: PRM: add PRM support 2012-06-18 12:08:06 -06:00
prm-regbits-34xx.h ARM: OMAP3: clock: Add 3xxx data using common struct clk 2012-11-12 19:18:49 -07:00
prm-regbits-44xx.h
prm.h ARM: OMAP2+: hwmod: Add support for per hwmod/module context lost count 2012-11-21 16:15:17 -07:00
prminst44xx.c
prminst44xx.h ARM: OMAP2+: PRCM: split and relocate the PRM/CM globals setup 2012-11-08 15:09:26 -07:00
scrm44xx.h ARM: OMAP4: clock: Add 44xx data using common struct clk 2012-11-12 19:10:20 -07:00
sdram-hynix-h8mbx00u0mer-0em.h ARM: OMAP: move plat-omap/include/plat/sdrc.h into mach-omap2/sdrc.h 2012-10-17 10:18:37 -07:00
sdram-micron-mt46h32m32lf-6.h ARM: OMAP: move plat-omap/include/plat/sdrc.h into mach-omap2/sdrc.h 2012-10-17 10:18:37 -07:00
sdram-nokia.c ARM: OMAP: remove plat/clock.h 2012-10-18 16:23:20 -07:00
sdram-nokia.h
sdram-numonyx-m65kxxxxam.h ARM: OMAP: move plat-omap/include/plat/sdrc.h into mach-omap2/sdrc.h 2012-10-17 10:18:37 -07:00
sdram-qimonda-hyb18m512160af-6.h ARM: OMAP: move plat-omap/include/plat/sdrc.h into mach-omap2/sdrc.h 2012-10-17 10:18:37 -07:00
sdrc2xxx.c omap prcm changes via Paul Walmsley <paul@pwsan.com>: 2012-11-30 08:40:31 -08:00
sdrc.c omap prcm changes via Paul Walmsley <paul@pwsan.com>: 2012-11-30 08:40:31 -08:00
sdrc.h ARM: OMAP2+: common: remove mach-omap2/common.c globals and map_common_io code 2012-11-08 12:33:07 -07:00
serial.c ARM: OMAP: Move plat-omap/dma-omap.h to include/linux/omap-dma.h 2012-11-30 08:41:50 -08:00
serial.h ARM: OMAP2+: Fix relative includes for serial.h 2012-10-31 15:37:14 -07:00
sleep24xx.S ARM: OMAP2+ Move SoC specific headers to be local to mach-omap2 2012-09-12 18:06:31 -07:00
sleep34xx.S omap prcm changes via Paul Walmsley <paul@pwsan.com>: 2012-11-30 08:40:31 -08:00
sleep44xx.S ARM: OMAP2+: Make omap-secure.h local 2012-09-20 15:02:35 -07:00
smartreflex-class3.c ARM: OMAP2+: smartreflex: Use the names from hwmod data instead of voltage domains. 2012-05-31 16:03:44 -07:00
soc.h ARM: OMAP4: ID: Improve features detection and check 2012-11-14 12:10:37 -08:00
sr_device.c Merge branch 'omap-for-v3.8/pm' into omap-for-v3.8/clock 2012-11-13 13:25:38 -08:00
sram34xx.S ARM: OMAP2+: CM/hwmod: split CM functions into OMAP2, OMAP3-specific files 2012-10-21 01:01:11 -06:00
sram242x.S ARM: OMAP2+: CM/hwmod: split CM functions into OMAP2, OMAP3-specific files 2012-10-21 01:01:11 -06:00
sram243x.S ARM: OMAP2+: CM/hwmod: split CM functions into OMAP2, OMAP3-specific files 2012-10-21 01:01:11 -06:00
sram.c ARM: OMAP: Move omap2+ specific parts of sram.c to mach-omap2 2012-10-31 10:14:14 -07:00
sram.h ARM: OMAP: Split sram.h to local headers and minimal shared header 2012-10-31 10:14:13 -07:00
ti81xx.h ARM: OMAP2+: common: remove mach-omap2/common.c globals and map_common_io code 2012-11-08 12:33:07 -07:00
timer.c ARM: omap: fix typo on timer cleanup 2012-11-29 23:16:12 -08:00
twl-common.c ARM: arm-soc: Merge branch 'next/clk' into next/pm 2012-12-12 16:10:00 -08:00
twl-common.h Sound updates for 3.7-rc1 2012-10-09 07:07:14 +09:00
usb-host.c Merge branch 'omap-for-v3.8/cleanup-headers-usb' into omap-for-v3.8/cleanup-headers 2012-10-24 15:05:45 -07:00
usb-musb.c Merge branch 'omap-for-v3.8/cleanup-headers-usb' into omap-for-v3.8/cleanup-headers 2012-10-24 15:05:45 -07:00
usb-tusb6010.c ARM: OMAP2+: tusb6010: generic timing calculation 2012-11-09 18:07:23 +05:30
usb.h ARM: OMAP: move OMAP USB platform data to <linux/platform_data/omap-usb.h> 2012-10-24 14:26:55 -07:00
vc3xxx_data.c ARM: OMAP3+: voltage: introduce omap vc / vp params for voltagedomains 2012-11-05 15:08:22 -08:00
vc44xx_data.c ARM: OMAP3+: voltage: introduce omap vc / vp params for voltagedomains 2012-11-05 15:08:22 -08:00
vc.c Merge branch 'next/pm-samsung' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/pm 2012-11-30 09:12:33 -08:00
vc.h ARM: OMAP3: VC: calculate ramp times 2012-11-05 15:08:23 -08:00
voltage.c ARM: OMAP: unwrap strings 2012-09-12 02:57:10 -06:00
voltage.h ARM: OMAP4: VC: setup I2C parameters based on board data 2012-11-05 15:31:12 -08:00
voltagedomains2xxx_data.c
voltagedomains3xxx_data.c ARM: OMAP3+: voltage: introduce omap vc / vp params for voltagedomains 2012-11-05 15:08:22 -08:00
voltagedomains33xx_data.c ARM: OMAP AM33xx: voltagedomain: Add voltage domain data 2012-06-18 00:47:26 -06:00
voltagedomains44xx_data.c Merge branch 'omap-for-v3.8/pm' into omap-for-v3.8/clock 2012-11-13 13:25:38 -08:00
vp3xxx_data.c ARM: OMAP3+: voltage: introduce omap vc / vp params for voltagedomains 2012-11-05 15:08:22 -08:00
vp44xx_data.c ARM: OMAP3+: voltage: introduce omap vc / vp params for voltagedomains 2012-11-05 15:08:22 -08:00
vp.c OMAP voltage layer updates towards supporting auto-retention/auto-off 2012-11-06 17:06:37 -08:00
vp.h ARM: OMAP3+: voltage: introduce omap vc / vp params for voltagedomains 2012-11-05 15:08:22 -08:00
wd_timer.c ARM: OMAP2+: PRCM: consolidate PRCM-related timeout macros 2012-11-08 15:09:26 -07:00
wd_timer.h ARM: OMAP: Make plat/omap_hwmod.h local to mach-omap2 2012-10-18 16:05:55 -07:00