linux/drivers/iio
Javier Martinez Canillas 34591a162f iio: imu: inv_mpu6050: Add OF device ID table
The driver doesn't have a struct of_device_id table but supported devices
are registered via Device Trees. This is working on the assumption that a
I2C device registered via OF will always match a legacy I2C device ID and
that the MODALIAS reported will always be of the form i2c:<device>.

But this could change in the future so the correct approach is to have an
OF device ID table if the devices are registered via OF.

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-03-19 10:54:43 +00:00
..
accel iio: accel: Prefer unsigned int to bare use of unsigned 2017-03-19 10:37:21 +00:00
adc iio: adc: ina2xx: Add OF device ID table 2017-03-19 10:47:53 +00:00
amplifiers spi: Updates for v4.4 2015-11-05 13:15:12 -08:00
buffer iio:buffer.h - split into buffer.h and buffer_impl.h 2017-01-10 19:54:55 +00:00
chemical iio:chemical:atlas-ph-sensor: Fix use of 32 bit int to hold 16 bit big endian value 2016-10-23 22:18:27 +01:00
common iio: hid: Add temperature sensor support 2017-03-04 18:45:26 +00:00
counter iio: pc104: Mask PC/104 drivers via the PC104 Kconfig option 2017-03-15 21:59:08 +00:00
dac iio: dac: mcp4725: Add OF device ID table 2017-03-19 10:51:04 +00:00
dummy iio:dummy: Stop enabling timestamp by default. 2017-01-10 19:54:55 +00:00
frequency iio: frequency: ad9523: use unsigned int rather then bare unsigned 2016-04-17 10:31:03 +01:00
gyro iio: common: ssp_sensors: gyro: use devm_iio_device_register() 2017-01-28 12:16:17 +00:00
health First set of IIO new device support, features and cleanup for the 4.12 cycle. 2017-03-06 13:17:21 +01:00
humidity Merge 4.10-rc7 into staging-next 2017-02-06 09:36:10 +01:00
imu iio: imu: inv_mpu6050: Add OF device ID table 2017-03-19 10:54:43 +00:00
light iio: light: tsl2563: Add OF device ID table 2017-03-19 10:52:56 +00:00
magnetometer iio: magnetometer: bmc150_magn_i2c: Add OF device ID table 2017-03-19 10:50:10 +00:00
orientation iio: orientation: hid-sensor-rotation: Add PM function (fix non working driver) 2016-11-05 17:47:47 +00:00
potentiometer iio: max5481: Add support for Maxim digital potentiometers 2017-01-28 12:13:31 +00:00
potentiostat iio: lmp91000: Set parent device 2017-02-19 12:01:52 +00:00
pressure iio: pressure: hp03: Add OF device ID table 2017-03-19 10:53:39 +00:00
proximity iio: pulsedlight-lidar-lite-v2: Set parent device 2017-02-19 12:02:31 +00:00
temperature iio: mlx96014: Add OF device ID table 2017-03-19 10:49:24 +00:00
trigger Immutable branch between MFD, IIO and PWM due for the v4.11 merge window 2017-01-28 18:21:49 +00:00
iio_core_trigger.h
iio_core.h iio:core: timestamping clock selection support 2016-06-30 19:41:38 +01:00
industrialio-buffer.c sched/headers: Prepare to move signal wakeup & sigpending methods from <linux/sched.h> into <linux/sched/signal.h> 2017-03-02 08:42:32 +01:00
industrialio-configfs.c iio:configfs: Introduce iio/configfs.h to provide a location for the configfs_subsystem 2015-12-05 16:25:30 +00:00
industrialio-core.c iio:buffer.h - split into buffer.h and buffer_impl.h 2017-01-10 19:54:55 +00:00
industrialio-event.c iio: iio_push_event(): Don't crash if the event interface is not registered 2016-09-10 16:40:44 +01:00
industrialio-sw-device.c iio: Add support for creating IIO devices via configfs 2016-05-04 11:43:54 +01:00
industrialio-sw-trigger.c iio: core: fix ptr_ret.cocci warnings 2016-01-20 17:09:18 -08:00
industrialio-trigger.c iio: trigger: clean up viio_trigger_alloc() 2017-01-22 13:37:34 +00:00
industrialio-triggered-event.c iio: Support triggered events 2015-08-27 20:47:09 +01:00
inkern.c iio: inkern: pass through raw values if no scaling 2017-01-14 12:20:18 +00:00
Kconfig iio: 104-quad-8: Add IIO support for the ACCES 104-QUAD-8 2016-10-01 17:06:21 +01:00
Makefile iio: 104-quad-8: Add IIO support for the ACCES 104-QUAD-8 2016-10-01 17:06:21 +01:00