forked from Minki/linux
2bd8040174
Core changes - Return NULL from gpiod_get_optional() when GPIOLIB is disabled. This was a much discussed change. It affects use cases where people write drivers that might or might not be using GPIO resources. I have decided that this is the lesser evil right now. - Make gpiod_count() behave consistently across different hardware descriptions. - Fix the syntax around open drain/open source to not infer active high/low semantics. New drivers - A new single-register fixed-direction framework driver for hardware that have lines controlled by a single register that just work in one direction (out or in), including IRQ support. - Support the Fintek F71889A GPIO SuperIO controller. - Support the National NI 169445 MMIO GPIO. - Support for the X-Gene derivative of the DWC GPIO controller - Support for the Rohm BD9571MWV-M PMIC GPIO controller. - Refactor the Gemini GPIO driver to a generic Faraday FTGPIO driver and replace both the Gemini and the Moxa ART custom drivers with this driver. Driver improvements - A whole slew of drivers have their spinlocks chaned to raw spinlocks as they provide irqchips, and thus we are progressing on realtime compliance. - Use devm_irq_alloc_descs() in a slew of drivers, getting managed resources. - Support for the embedded PWM controller inside the MVEBU driver. - Debounce, open source and open drain support for the Aspeed driver. - Misc smaller fixes like spelling and syntax and whatnot. -----BEGIN PGP SIGNATURE----- iQIcBAABAgAGBQJZCusBAAoJEEEQszewGV1zengP/i3YgmSXJdaf26t/NxG3klU3 qx3akdQ3gEQ6BOlIY7Ew+b6qgMJynYNZa1trZgqTgLxPEKWjidyCgz+LHQ0OY+ir a7x6wr+gBj5WlgV+nBjVs4l6W8pVKCfnap/04OPEQDpxZOHs2LU5pqxxUZ9AxkKS urDFMDX55baFviQ+xAuHgamok87YoGP36A/e/fHIBepZmnochf0mCcPfIh0t8lRh s2x29PN5ZFRkl403RzjZfVCEMr9bMnSqmDquvPO++Kq0bL+3rOhuMErocd1Bg8ao LxBktkryujTaw699xK7Rq5SwcnOAPpaBY4NTmwsIJvAJuCh7qLy9JxQSBsSOT2bx 61NWUt5T/Xsi0ECYZM4YvsNpUP6XrpSTyG3c8T3fY9vXYLNKZBv1ht6OODpLeuke DxULAWP+DdzUS8a3qfKQvIJzSTloU31a1MBG58DWNJ072EQfa2YNaVE75VQk/z5/ 0xZbSHdPY/0Xgx8ltpKu37bSO676JiVQZZ1HEAuti4h21+USYueYD2L8/Bx4k9e/ 4UaOcw3MaCDHP/sf5hg17kQBjhhS0lV9Zv6H9QbHZUocJTJlIU+vXtgkQlrfi3n8 8j5m+ywVarmLtPqg1j2rqcw7LBCPe0qRXH3e5X/YmNMc3rH9bQz4cTo8ZSN9r8zS c17zGbbAqlGsBkpFAbQz =DGPb -----END PGP SIGNATURE----- Merge tag 'gpio-v4.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO updates from Linus Walleij: "This is the bulk of GPIO changes for the v4.12 kernel cycle. Core changes: - Return NULL from gpiod_get_optional() when GPIOLIB is disabled. This was a much discussed change. It affects use cases where people write drivers that might or might not be using GPIO resources. I have decided that this is the lesser evil right now. - Make gpiod_count() behave consistently across different hardware descriptions. - Fix the syntax around open drain/open source to not infer active high/low semantics. New drivers: - A new single-register fixed-direction framework driver for hardware that have lines controlled by a single register that just work in one direction (out or in), including IRQ support. - Support the Fintek F71889A GPIO SuperIO controller. - Support the National NI 169445 MMIO GPIO. - Support for the X-Gene derivative of the DWC GPIO controller - Support for the Rohm BD9571MWV-M PMIC GPIO controller. - Refactor the Gemini GPIO driver to a generic Faraday FTGPIO driver and replace both the Gemini and the Moxa ART custom drivers with this driver. Driver improvements: - A whole slew of drivers have their spinlocks chaned to raw spinlocks as they provide irqchips, and thus we are progressing on realtime compliance. - Use devm_irq_alloc_descs() in a slew of drivers, getting managed resources. - Support for the embedded PWM controller inside the MVEBU driver. - Debounce, open source and open drain support for the Aspeed driver. - Misc smaller fixes like spelling and syntax and whatnot" * tag 'gpio-v4.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (77 commits) gpio: f7188x: Add a missing break gpio: omap: return error if requested debounce time is not possible gpio: Add ROHM BD9571MWV-M PMIC GPIO driver gpio: gpio-wcove: fix GPIO IRQ status mask gpio: DT bindings, move tca9554 from pcf857x to pca953x gpio: move tca9554 from pcf857x to pca953x gpio: arizona: Correct check whether the pin is an input gpio: Add XRA1403 DTS binding documentation dt-bindings: add exar to vendor prefixes list gpio: gpio-wcove: fix irq pending status bit width gpio: dwapb: use dwapb_read instead of readl_relaxed gpio: aspeed: Add open-source and open-drain support gpio: aspeed: Add debounce support gpio: aspeed: dt: Add optional clocks property gpio: aspeed: dt: Fix description alignment in bindings document gpio: mvebu: Add limited PWM support gpio: Use unsigned int for interrupt numbers gpio: f7188x: Add F71889A GPIO support. gpio: core: Decouple open drain/source flag with active low/high gpio: arizona: Correct handling for reading input GPIOs ... |
||
---|---|---|
.. | ||
devres.c | ||
gpio-74x164.c | ||
gpio-74xx-mmio.c | ||
gpio-104-dio-48e.c | ||
gpio-104-idi-48.c | ||
gpio-104-idio-16.c | ||
gpio-adnp.c | ||
gpio-adp5520.c | ||
gpio-adp5588.c | ||
gpio-altera-a10sr.c | ||
gpio-altera.c | ||
gpio-amd8111.c | ||
gpio-amdpt.c | ||
gpio-arizona.c | ||
gpio-aspeed.c | ||
gpio-ath79.c | ||
gpio-axp209.c | ||
gpio-bcm-kona.c | ||
gpio-bd9571mwv.c | ||
gpio-brcmstb.c | ||
gpio-bt8xx.c | ||
gpio-clps711x.c | ||
gpio-crystalcove.c | ||
gpio-cs5535.c | ||
gpio-da9052.c | ||
gpio-da9055.c | ||
gpio-davinci.c | ||
gpio-dln2.c | ||
gpio-dwapb.c | ||
gpio-em.c | ||
gpio-ep93xx.c | ||
gpio-etraxfs.c | ||
gpio-exar.c | ||
gpio-f7188x.c | ||
gpio-ftgpio010.c | ||
gpio-ge.c | ||
gpio-gpio-mm.c | ||
gpio-grgpio.c | ||
gpio-htc-egpio.c | ||
gpio-ich.c | ||
gpio-intel-mid.c | ||
gpio-iop.c | ||
gpio-it87.c | ||
gpio-janz-ttl.c | ||
gpio-kempld.c | ||
gpio-ks8695.c | ||
gpio-loongson1.c | ||
gpio-loongson.c | ||
gpio-lp873x.c | ||
gpio-lp3943.c | ||
gpio-lpc18xx.c | ||
gpio-lpc32xx.c | ||
gpio-lynxpoint.c | ||
gpio-max730x.c | ||
gpio-max732x.c | ||
gpio-max7300.c | ||
gpio-max7301.c | ||
gpio-max77620.c | ||
gpio-mb86s7x.c | ||
gpio-mc9s08dz60.c | ||
gpio-mc33880.c | ||
gpio-mcp23s08.c | ||
gpio-menz127.c | ||
gpio-merrifield.c | ||
gpio-ml-ioh.c | ||
gpio-mm-lantiq.c | ||
gpio-mmio.c | ||
gpio-mockup.c | ||
gpio-mpc8xxx.c | ||
gpio-mpc5200.c | ||
gpio-msic.c | ||
gpio-mvebu.c | ||
gpio-mxc.c | ||
gpio-mxs.c | ||
gpio-octeon.c | ||
gpio-omap.c | ||
gpio-palmas.c | ||
gpio-pca953x.c | ||
gpio-pcf857x.c | ||
gpio-pch.c | ||
gpio-pci-idio-16.c | ||
gpio-pisosr.c | ||
gpio-pl061.c | ||
gpio-pxa.c | ||
gpio-rc5t583.c | ||
gpio-rcar.c | ||
gpio-rdc321x.c | ||
gpio-reg.c | ||
gpio-sa1100.c | ||
gpio-sch311x.c | ||
gpio-sch.c | ||
gpio-sodaville.c | ||
gpio-spear-spics.c | ||
gpio-sta2x11.c | ||
gpio-stmpe.c | ||
gpio-stp-xway.c | ||
gpio-syscon.c | ||
gpio-tb10x.c | ||
gpio-tc3589x.c | ||
gpio-tegra.c | ||
gpio-timberdale.c | ||
gpio-tpic2810.c | ||
gpio-tps6586x.c | ||
gpio-tps65086.c | ||
gpio-tps65218.c | ||
gpio-tps65910.c | ||
gpio-tps65912.c | ||
gpio-ts4800.c | ||
gpio-ts4900.c | ||
gpio-ts5500.c | ||
gpio-twl4030.c | ||
gpio-twl6040.c | ||
gpio-tz1090-pdc.c | ||
gpio-tz1090.c | ||
gpio-ucb1400.c | ||
gpio-vf610.c | ||
gpio-viperboard.c | ||
gpio-vr41xx.c | ||
gpio-vx855.c | ||
gpio-wcove.c | ||
gpio-wm831x.c | ||
gpio-wm8350.c | ||
gpio-wm8994.c | ||
gpio-ws16c48.c | ||
gpio-xgene-sb.c | ||
gpio-xgene.c | ||
gpio-xilinx.c | ||
gpio-xlp.c | ||
gpio-xtensa.c | ||
gpio-zevio.c | ||
gpio-zx.c | ||
gpio-zynq.c | ||
gpiolib-acpi.c | ||
gpiolib-devprop.c | ||
gpiolib-legacy.c | ||
gpiolib-of.c | ||
gpiolib-sysfs.c | ||
gpiolib.c | ||
gpiolib.h | ||
Kconfig | ||
Makefile |