..
accel
iio: common: ssp_sensors: accel: use devm_iio_device_register()
2017-01-28 12:15:22 +00:00
adc
iio: adc: stm32: add trigger polarity extended attribute
2017-01-28 18:24:57 +00:00
amplifiers
spi: Updates for v4.4
2015-11-05 13:15:12 -08:00
buffer
iio:buffer.h - split into buffer.h and buffer_impl.h
2017-01-10 19:54:55 +00:00
chemical
iio:chemical:atlas-ph-sensor: Fix use of 32 bit int to hold 16 bit big endian value
2016-10-23 22:18:27 +01:00
common
First round of new device support, features and cleanups for IIO in the 4.11 cycle.
2017-01-19 10:40:44 +01:00
counter
iio: 104-quad-8: Fix active level mismatch for the preset enable option
2016-12-03 10:08:09 +00:00
dac
iio: dac: ad5593r: Add ACPI support
2016-12-30 17:20:14 +00:00
dummy
iio:dummy: Stop enabling timestamp by default.
2017-01-10 19:54:55 +00:00
frequency
iio: frequency: ad9523: use unsigned int rather then bare unsigned
2016-04-17 10:31:03 +01:00
gyro
iio: common: ssp_sensors: gyro: use devm_iio_device_register()
2017-01-28 12:16:17 +00:00
health
iio: health: max30100: use msleep() for long uncritical delays
2017-01-22 13:21:28 +00:00
humidity
iio: humidity: Support acpi probe for hts211
2016-12-03 08:56:28 +00:00
imu
iio: imu: st_lsm6dsx: add possibility to select drdy pin
2017-01-28 12:41:53 +00:00
light
Second round of IIO new device support, cleanups and features for the 4.11 cycle
2017-01-23 09:23:23 +01:00
magnetometer
iio: magnetometer: mag3110: claim direct mode during raw writes
2017-01-21 12:20:40 +00:00
orientation
iio: orientation: hid-sensor-rotation: Add PM function (fix non working driver)
2016-11-05 17:47:47 +00:00
potentiometer
iio: max5481: Add support for Maxim digital potentiometers
2017-01-28 12:13:31 +00:00
potentiostat
iio: potentiostat: add LMP91000 support
2016-09-27 20:33:03 +01:00
pressure
iio: cros_ec: Add cros_ec barometer driver
2017-01-28 15:07:46 +00:00
proximity
iio: distance: srf08: add IIO driver for us ranger
2017-01-28 16:38:24 +00:00
temperature
iio:temperature: Add support for TI TMP007 sensor
2017-01-14 10:45:05 +00:00
trigger
Immutable branch between MFD, IIO and PWM due for the v4.11 merge window
2017-01-28 18:21:49 +00:00
iio_core_trigger.h
iio_core.h
iio:core: timestamping clock selection support
2016-06-30 19:41:38 +01:00
industrialio-buffer.c
iio:buffer.h - split into buffer.h and buffer_impl.h
2017-01-10 19:54:55 +00:00
industrialio-configfs.c
iio:configfs: Introduce iio/configfs.h to provide a location for the configfs_subsystem
2015-12-05 16:25:30 +00:00
industrialio-core.c
iio:buffer.h - split into buffer.h and buffer_impl.h
2017-01-10 19:54:55 +00:00
industrialio-event.c
iio: iio_push_event(): Don't crash if the event interface is not registered
2016-09-10 16:40:44 +01:00
industrialio-sw-device.c
iio: Add support for creating IIO devices via configfs
2016-05-04 11:43:54 +01:00
industrialio-sw-trigger.c
iio: core: fix ptr_ret.cocci warnings
2016-01-20 17:09:18 -08:00
industrialio-trigger.c
iio: trigger: clean up viio_trigger_alloc()
2017-01-22 13:37:34 +00:00
industrialio-triggered-event.c
inkern.c
iio: inkern: pass through raw values if no scaling
2017-01-14 12:20:18 +00:00
Kconfig
iio: 104-quad-8: Add IIO support for the ACCES 104-QUAD-8
2016-10-01 17:06:21 +01:00
Makefile
iio: 104-quad-8: Add IIO support for the ACCES 104-QUAD-8
2016-10-01 17:06:21 +01:00
732f2dc468