Fix sparse warning:
drivers/gpu/drm/i915/intel_device_info.c:195:31: warning: Variable
length array is used.
In truth the array does have constant length, but sparse is too dumb to
realize. This is a bit ugly, but silence the warning no matter what.
Fixes: 91bedd34ab ("drm/i915/bdw: Check for slice, subslice and EU count for BDW")
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1475574853-4178-1-git-send-email-jani.nikula@intel.com
When decoding the semaphores inside hangcheck, we need to use the hw-id
and not the local array index.
Fixes: de1add3605 ("drm/i915: Decouple execbuf uAPI ...")
Testcase: igt/gem_exec_whisper/hang # gen6-7
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: stable@vger.kernel.org
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161003124516.12388-3-chris@chris-wilson.co.uk
We were previously adding all the planes owned by the CRTC even when
the ddb partitioning didn't change for them. As a consequence, a lot
of functions were being called when we were just moving the cursor
around the screen, such as skylake_update_primary_plane().
This was causing flickering on the primary plane when moving the
cursor. I'm not 100% sure which operation caused the flickering, but
we were writing to a lot of registers, so it could be any of these
writes. With this patch, just moving the mouse won't add the primary
plane to the commit since it won't trigger a change in DDB
partitioning.
v2: Use skl_ddb_entry_equal() (Lyude).
v3: Change Reported-and-bisected-by: to Reported-by: for checkpatch
Fixes: 05a76d3d6a ("drm/i915/skl: Ensure pipes with changed wms get added to the state")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97888
Cc: Mike Lothian <mike@fireburn.co.uk>
Cc: stable@vger.kernel.org
Reported-by: Mike Lothian <mike@fireburn.co.uk>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Lyude <cpaul@redhat.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1475177808-29955-1-git-send-email-paulo.r.zanoni@intel.com
DPLL_SDVO_HIGH_SPEED must be set for SDVO/HDMI/DP, but nowhere is it
forbidden to set it for LVDS/CRT as well. So let's also set it on
CRT to make it possible to share the DPLL between HDMI and CRT.
What that bit apparently does is enable the x5 clock to the port,
which then pumps out the bits on both edges of the clock. The DAC
doesn't need that clock since it's not pumping out bits, but I don't
think it hurts to have the DPLL output that clock anyway.
This is fairly important on IVB since it has only two DPLLs with three
pipes. So trying to drive three or more PCH ports with three pipes
is only possible when at least one of the DPLLs gets shared between
two of the pipes.
SNB doesn't really need to do this since it has only two pipes. It could
be done to avoid enabling the second DPLL at all in certain cases, but
I'm not sure that's such a huge win. So let's not do it for SNB, at
least for now. On ILK it never makes sense as the DPLLs can't be shared.
v2: Just always enable the high speed clock to keep things simple (Daniel)
Beef up the commit message a bit (Daniel)
Cc: Nick Yamane <nick.diego@gmail.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: stable@vger.kernel.org
Tested-by: Nick Yamane <nick.diego@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97204
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1474878646-17711-1-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com>
a277ca7dc0 should've been a no-functional-change commit, but it
removed the initialization of the dpll_hw_state for HDMI outputs,
resulting in state mismatches and a failed modeset with blank
screen. Fix this by reinstating the dpll_hw_state initialization.
v2:
- Make bxt_ddi_hdmi_set_dpll_hw_state() static.
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Cc: Durgadoss R <durgadoss.r@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Fixes: a277ca7dc0 ("drm/i915: Split bxt_ddi_pll_select()")
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1474901671-22719-1-git-send-email-imre.deak@intel.com
We just removed the implementation for all the pre-production
workarounds, so now tell the user that we expect his machine to not
work properly. Also convert this to DRM_ERROR so we can more easily
spot these problems in bug reports and CI/QA runs.
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1474891672-23414-2-git-send-email-jani.nikula@intel.com
When i915_fbc_status is read while fbc is disabled,
it reports compressing to be true, which is confusing.
Report compressing only when fbc is enabled.
v2 (from Paulo): commit message capitalization.
Signed-off-by: vathsala nagaraju <vathsala.nagaraju@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1474534193-9527-1-git-send-email-vathsala.nagaraju@intel.com
Now that this code is part of the compute stage we can return -EINVAL
to prevent the modeset instead of giving a WARN and trying anyway.
v2:
- Fix typo (Paul Menzel).
- Add MISSING_CASE() (Ville, Maarten).
Reported-by: Lyude <cpaul@redhat.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1474578035-424-10-git-send-email-paulo.r.zanoni@intel.com
This should affect linear and X tiled planes on really small htotal
cases. It doesn't seem to be a very feasible case, but let's implement
it since it's on the specification and it's better to have it and
never need than not have it and realize we needed it.
Reviewed-by: Lyude <cpaul@redhat.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1474578035-424-9-git-send-email-paulo.r.zanoni@intel.com
We forgot the "res_blocks += y_tile_minimum" that's described on step
V of our documentation.
Again, this should only affect the Y tiling cases.
It looks like the relevant code was introduced in 0fda65680e, but
there's always the possibility that it matched our specification when
it was introduced, and then the specification changed while the code
stayed the same. So we can't really say this was a regression, but
let's try to add a "Fixes" tag anyway to help backporting.
v2: Try to add a "Fixes" tag (Maarten).
Fixes: 0fda65680e ("drm/i915/skl: Update watermarks for Y tiling")
Cc: stable@vger.kernel.org
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Lyude <cpaul@redhat.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1474578035-424-8-git-send-email-paulo.r.zanoni@intel.com
The confusing thing is that plane_blocks_per_line is listed as part of
the method 2 calculation but is also used for other things. We
calculated it in two different places and different ways: one inside
skl_wm_method2() and the other inside skl_compute_plane_wm(). The
skl_wm_method2() implementation is the one that matches the
specification.
With this patch we fix the skl_compute_plane_wm() calculation and just
pass it as a parameter to skl_wm_method2(). We also take care to not
modify the value of plane_bytes_per_line since we're going to rely on
it having a correct value in later patches.
This should affect the watermarks for Linear and Y-tiled.
From my analysis, it looks like the two plane_blocks_per_line
variables got out of sync on 0fda65680e, but we can't really say
that commit was a regression, it looks like just an incomplete fix.
There's always the possibility that 0fda65680e matched our
specification at that time, and then later the specification changed.
v2: Try to add a "Fixes" tag (Maarten).
Fixes: 0fda65680e ("drm/i915/skl: Update watermarks for Y tiling")
Cc: stable@vger.kernel.org
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Lyude <cpaul@redhat.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1474578035-424-7-git-send-email-paulo.r.zanoni@intel.com
During watermarks calculations, this value is used in 3 different
places. Only one of them was not using a hardcoded 4. Move the code up
so everybody can benefit from the actual value.
This should only help on situations with Y tiling + 90/270 rotation +
1 or 2 bpp or NV12.
Cc: stable@vger.kernel.org
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1474578035-424-6-git-send-email-paulo.r.zanoni@intel.com
Bspec says:
"The mailbox response data may not account for memory read latency.
If the mailbox response data for level 0 is 0us, add 2 microseconds
to the result for each valid level."
This means we should only do the +2 in case wm[0] == 0, not always.
So split the sanitizing implementation from the WA implementation and
fix the WA implementation.
v2: Add Fixes tag (Maarten).
Fixes: 367294be7c ("drm/i915/gen9: Add 2us read latency to WM level")
Cc: stable@vger.kernel.org
Cc: Vandana Kannan <vandana.kannan@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1474578035-424-5-git-send-email-paulo.r.zanoni@intel.com
And use it to move knowledge about the SAGV-supporting platforms from
the callers to the SAGV code.
We'll add more platforms to intel_has_sagv(), so IMHO it makes more
sense to move all this to a single function instead of patching all
the callers every time we add SAGV support to a new platform.
v2: Move I915_SAGV_NOT_CONTROLLED to the new function (Lyude).
Cc: stable@vger.kernel.org
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1474578035-424-3-git-send-email-paulo.r.zanoni@intel.com
The plan is to introduce intel_has_sagv() and then use it to discover
which platforms actually support it.
I thought about keeping the functions with their current skl names,
but found two problems: (i) skl_has_sagv() would become a very
confusing name, and (ii) intel_atomic_commit_tail() doesn't seem to be
calling any functions whose name start with a platform name, so the
"intel_" naming scheme seems make more sense than the "firstplatorm_"
naming scheme here.
Cc: stable@vger.kernel.org
Reviewed-by: Lyude <cpaul@redhat.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1474578035-424-2-git-send-email-paulo.r.zanoni@intel.com
We never remembered to set it (so it was zero), but this was not a
problem in the past due to the way handled the hardware registers.
Unfortunately we changed how we set the hardware and forgot to set
intel_crtc->dspaddr_offset.
This started to reflect on a few kms_frontbuffer_tracking subtests
that relied on page flips with CRTCs that don't point to the x:0,y:0
coordinates of the frontbuffer. After the page flip the CRTC was
showing the x:0,y:0 coordinate of the frontbuffer instead of
x:500,y:500. This problem is present even if we don't enable FBC or
PSR.
While trying to bisect it I realized that the first bad commit
actually just gives me a black screen for the mentioned tests instead
of showing the wrong x:0,y:0 offsets. A few commits later the black
screen problem goes away and we get to the point where the code is
today, but I'll consider the black screen as the first bad commit
since it's the point where the IGT subtests start to fail.
Fixes: 6687c9062c ("drm/i915: Rewrite fb rotation GTT handling")
Testcase: kms_frontbuffer_tracking/fbc-1p-primscrn-shrfb-pgflip-blt
Testcase: kms_frontbuffer_tracking/fbc-1p-primscrn-shrfb-evflip-blt
Testcase: kms_frontbuffer_tracking/fbc-1p-shrfb-fliptrack
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Sivakumar Thulasimani <sivakumar.thulasimani@intel.com>
Cc: drm-intel-fixes@lists.freedesktop.org
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1471644203-23463-1-git-send-email-paulo.r.zanoni@intel.com
Ever since I started working on FBC I was already aware that FBC can
really amplify the FIFO underrun symptoms. On systems where FIFO
underruns were harmless error messages, enabling FBC would cause the
underruns to give black screens.
We recently tried to enable FBC on Haswell and got reports of a system
that would hang after some hours of uptime, and the first bad commit
was the one that enabled FBC. We also observed that this system had
FIFO underrun error messages on its dmesg. Although we don't have any
evidence that fixing the underruns would solve the bug and make FBC
work properly on this machine, IMHO it's better if we minimize the
amount of possible problems by just giving up FBC whenever we detect
an underrun.
v2: New version, different implementation and commit message.
v3: Clarify the fact that we run from an IRQ handler (Chris).
v4: Also add the underrun_detected check at can_choose() to avoid
misleading dmesg messages (DK).
v5: Fix Engrish, use READ_ONCE on the unlocked read (Chris).
Cc: Stefan Richter <stefanr@s5r6.in-berlin.de>
Cc: Lyude <cpaul@redhat.com>
Cc: stevenhoneyman@gmail.com <stevenhoneyman@gmail.com>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1473773937-19758-1-git-send-email-paulo.r.zanoni@intel.com
DP MST provides the capability to send multiple video and audio streams
through a single port. This requires the API's between i915 and audio
drivers to distinguish between multiple audio capable displays that can be
connected to a port. Currently only the port identity is shared in the
APIs. This patch adds support for MST with an additional parameter
'int pipe'. The existing parameter 'port' does not change it's meaning.
pipe =
MST : display pipe that the stream originates from
Non-MST : -1
Affected APIs:
struct i915_audio_component_ops
- int (*sync_audio_rate)(struct device *, int port, int rate);
+ int (*sync_audio_rate)(struct device *, int port, int pipe,
+ int rate);
- int (*get_eld)(struct device *, int port, bool *enabled,
- unsigned char *buf, int max_bytes);
+ int (*get_eld)(struct device *, int port, int pipe,
+ bool *enabled, unsigned char *buf, int max_bytes);
struct i915_audio_component_audio_ops
- void (*pin_eld_notify)(void *audio_ptr, int port);
+ void (*pin_eld_notify)(void *audio_ptr, int port, int pipe);
This patch makes dummy changes in the audio drivers (thanks Libin) for
build to succeed. The audio side drivers will send the right 'pipe' values
for MST in patches that will follow.
v2:
Renamed the new API parameter from 'dev_id' to 'pipe'. (Jim, Ville)
Included Asoc driver API compatibility changes from Jeeja.
Added WARN_ON() for invalid pipe in get_saved_encoder(). (Takashi)
Added comment for av_enc_map[] definition. (Takashi)
v3:
Fixed logic error introduced while renaming 'dev_id' as 'pipe' (Ville)
Renamed get_saved_encoder() to get_saved_enc() to reduce line length
v4:
Rebased.
Parameter check for pipe < -1 values in get_saved_enc() (Ville)
Switched to for_each_pipe() in get_saved_enc() (Ville)
Renamed 'pipe' to 'dev_id' in audio side code (Takashi)
v5:
Included a comment for the dev_id arg. (Libin)
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1474488168-2343-1-git-send-email-dhinakaran.pandiyan@intel.com
Fix sparse warnings:
drivers/gpu/drm/i915/i915_drv.c:1179:5: warning: symbol
'i915_driver_load' was not declared. Should it be static?
drivers/gpu/drm/i915/i915_drv.c:1267:6: warning: symbol
'i915_driver_unload' was not declared. Should it be static?
drivers/gpu/drm/i915/i915_drv.c:2444:25: warning: symbol 'i915_pm_ops'
was not declared. Should it be static?
Fixes: 42f5551d27 ("drm/i915: Split out the PCI driver interface to i915_pci.c")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1473946137-1931-3-git-send-email-jani.nikula@intel.com
(This patch is developed by Dave Airlie <airlied@redhat.com> originally)
This patch adds support for DP MST audio in i915.
Enable audio codec when DP MST is enabled if has_audio flag is set.
Disable audio codec when DP MST is disabled if has_audio flag is set.
Another separated patches to support DP MST audio will be implemented
in audio driver.
v2:
Rebased.
Signed-off-by: Libin Yang <libin.yang@linux.intel.com>
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Lyude <cpaul@redhat.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1474334681-22690-6-git-send-email-dhinakaran.pandiyan@intel.com
With DP MST, a digital_port can carry more than one audio stream. Hence,
more than one audio_connector needs to be attached to intel_digital_port in
such cases. However, each stream is associated with an unique encoder. So,
instead of creating an array of audio_connectors per port, move
audio_connector from struct intel_digital_port to struct intel_encoder.
This also simplifies access to the right audio_connector from codec
functions in intel_audio.c that receive intel_encoder.
v2: Removed locals that are not needed anymore.
v3: No code change except for minor change in context.
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Lyude <cpaul@redhat.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1474334681-22690-5-git-send-email-dhinakaran.pandiyan@intel.com
Now that we have the port enum stored in intel_encoder, use that instead of
dereferencing intel_dig_port. Saves us a few locals.
struct intel_encoder variables have been renamed to be consistent and
convey type information.
v2:
Fix incorrect 'enum port' member names - s/attached_port/port
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Lyude <cpaul@redhat.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1474334681-22690-4-git-send-email-dhinakaran.pandiyan@intel.com
Storing the port enum in intel_encoder makes it convenient to know the
port attached to an encoder. Moving the port information up from
intel_digital_port to intel_encoder avoids unecessary intel_digital_port
access and handles MST encoders cleanly without requiring conditional
checks for them (thanks danvet).
v2:
Renamed the port enum member from 'attached_port' to 'port' (danvet)
Fixed missing initialization of port in intel_sdvo.c (danvet)
v3:
Fixed missing initialization of port in intel_crt.c (Ville)
v4:
Storing port for DVO encoders too.
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Lyude <cpaul@redhat.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1474334681-22690-3-git-send-email-dhinakaran.pandiyan@intel.com
Changing the return type from 'char' to 'enum port' in
intel_dvo_port_name() makes it easier to later move the port information to
intel_encoder. In addition, the port type conforms to what we have
elsewhere.
Removing the last conditional that handles invalid port because dvo_reg is
intialized to valid values for all DVO devices at definition.
v2: Changed return type, for real (Jani)
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Lyude <cpaul@redhat.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1474334681-22690-2-git-send-email-dhinakaran.pandiyan@intel.com
There is a disparity in the context image saved to disk and our own
bookkeeping - that is we presume the RING_HEAD and RING_TAIL match our
stored ce->ring->tail value. However, as we emit WA_TAIL_DWORDS into the
ring but may not tell the GPU about them, the GPU may be lagging behind
our bookkeeping. Upon hibernation we do not save stolen pages, presuming
that their contents are volatile. This means that although we start
writing into the ring at tail, the GPU starts executing from its HEAD
and there may be some garbage in between and so the GPU promptly hangs
upon resume.
Testcase: igt/gem_exec_suspend/basic-S4
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96526
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160921135108.29574-3-chris@chris-wilson.co.uk
Following commit 821ed7df6e ("drm/i915: Update reset path to fix
incomplete requests") we no longer mark the context as lost on reset as
we keep the requests (and contexts) alive. However, RPS remains reset
and we need to restore the current state to match the in-flight
requests.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97824
Fixes: 821ed7df6e ("drm/i915: Update reset path to fix incomplete requests")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Arun Siluvery <arun.siluvery@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160921135108.29574-1-chris@chris-wilson.co.uk
While user space has control over the scheduling priority of its page
flipping thread, the corresponding work the driver schedules for MMIO
flips always runs from the generic system workqueue which has some
scheduling overhead due it being CPU bound. This would hinder an
application that wants more stringent guarantees over flip timing (to
avoid missing a flip at the next frame count).
Fix this by scheduling the work from the unbound system workqueue
which provides for minimal scheduling latency.
v2:
- Use an unbound workqueue instead of a high-prio one. (Tvrtko, Chris)
v3:
- Use the system unbound wq instead of a dedicated one. (Maarten)
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97775
Testcase: igt/kms_cursor_legacy
CC: Chris Wilson <chris@chris-wilson.co.uk>
CC: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
CC: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> (v1)
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1474372699-22841-1-git-send-email-imre.deak@intel.com
v2: (Imre)
- Access only subslices that are known to exist.
- Reset explicitly the MCR selector to slice/sub-slice ID 0 after the
readout.
- Use the subslice INSTDONE bits for the hangcheck/subunits-stuck
detection too.
- Take the uncore lock for the MCR-select/subslice-readout sequence.
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1474379673-28326-2-git-send-email-imre.deak@intel.com
Consolidate the instdone logic so we can get a bit fancier. This patch also
removes the duplicated print of INSTDONE[0].
v2: (Imre)
- Rebased on top of hangcheck INSTDONE changes.
- Move all INSTDONE registers into a single struct, store it within the
engine error struct during error capturing.
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1474379673-28326-1-git-send-email-imre.deak@intel.com
Reapply the PPS register unlock workaround after GPU reset on platforms
where the reset clobbers the display HW state. This at least gets rid of
the related WARN during LVDS encoder enabling on PNV.
Fixes: ed6143b8f7 ("drm/i915/lvds: Restore initial HW state during encoder enabling")
Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1473847453-4771-1-git-send-email-imre.deak@intel.com
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Based on the documentation alone, it's anyone's guess when exactly we
should be running these sequences. Add power on/off sequences where they
feel logical and update assert/deassert reset. The drm panel hooks don't
currently offer us more granularity anyway.
v2: update assert/deassert reset as well (Ville)
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1543320494df953fa073e136248238eaa1eed059.1474286487.git.jani.nikula@intel.com
