When recovery thread has begun GPU reset, there should be not other
threads to access hardware, otherwise system randomly hang.
v2 (chk): rewritten from scratch, use trylock and lockdep instead of
hand wiring the logic.
v3: add in_irq check
v4: change to check in_task
Signed-off-by: Dennis Li <Dennis.Li@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Since we're about to move drm_dp_helper.c over to drm_dbg_*(), we'll want
to make sure that we can also add ratelimited versions of these macros in
order to retain some of the previous debugging output behavior we had.
However, as I was preparing to do this I noticed that the current
rate limited macros we have are kind of bogus. It looks like when I wrote
these, I didn't notice that we'd always be calling __ratelimit() even if
the debugging message we'd be printing would normally be filtered out due
to the relevant DRM debugging category being disabled.
So, let's fix this by making sure to check drm_debug_enabled() in our
ratelimited macros before calling __ratelimit(), and start using
drm_dev_printk() in order to print debugging messages since that will save
us from doing a redundant drm_debug_enabled() check. And while we're at it,
let's move the code for this into another macro that we can reuse for
defining new ratelimited DRM debug macros more easily.
v2:
* Make sure to use tabs where possible in __DRM_DEFINE_DBG_RATELIMITED()
Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210326203807.105754-8-lyude@redhat.com
As pointed out by the documentation for drm_dp_aux_register(),
drm_dp_aux_init() should be used in situations where the AUX channel for a
display driver can potentially be registered before it's respective DRM
driver. This is the case with Tegra, since the DP aux channel exists as a
platform device instead of being a grandchild of the DRM device.
Since we're about to add a backpointer to a DP AUX channel's respective DRM
device, let's fix this so that we don't potentially allow userspace to use
the AUX channel before we've associated it with it's DRM connector.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210326203807.105754-3-lyude@redhat.com
Allocate a new private stub fence in drm_syncobj_assign_null_handle,
instead of using a static stub fence.
When userspace creates a fence with DRM_SYNCOBJ_CREATE_SIGNALED or when
userspace signals a fence via DRM_IOCTL_SYNCOBJ_SIGNAL, the timestamp
obtained when the fence is exported and queried with SYNC_IOC_FILE_INFO
should match when the fence's status was changed from the perspective of
userspace, which is during the respective ioctl.
When a static stub fence started being used in by these ioctls, this
behavior changed. Instead, the timestamp returned by SYNC_IOC_FILE_INFO
became the first time anything used the static stub fence, which has no
meaning to userspace.
Signed-off-by: David Stevens <stevensd@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210408095428.3983055-1-stevensd@google.com
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
If CONFIG_DRM_LONTIUM_LT8912B=m, the following errors will be seen while
compiling lontium-lt8912b.c
drivers/gpu/drm/bridge/lontium-lt8912b.c: In function
‘lt8912_hard_power_on’:
drivers/gpu/drm/bridge/lontium-lt8912b.c:252:2: error: implicit
declaration of function ‘gpiod_set_value_cansleep’; did you mean
‘gpio_set_value_cansleep’? [-Werror=implicit-function-declaration]
gpiod_set_value_cansleep(lt->gp_reset, 0);
^~~~~~~~~~~~~~~~~~~~~~~~
gpio_set_value_cansleep
drivers/gpu/drm/bridge/lontium-lt8912b.c: In function ‘lt8912_parse_dt’:
drivers/gpu/drm/bridge/lontium-lt8912b.c:628:13: error: implicit
declaration of function ‘devm_gpiod_get_optional’; did you mean
‘devm_gpio_request_one’? [-Werror=implicit-function-declaration]
gp_reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH);
^~~~~~~~~~~~~~~~~~~~~~~
devm_gpio_request_one
drivers/gpu/drm/bridge/lontium-lt8912b.c:628:51: error: ‘GPIOD_OUT_HIGH’
undeclared (first use in this function); did you mean ‘GPIOF_INIT_HIGH’?
gp_reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH);
^~~~~~~~~~~~~~
GPIOF_INIT_HIGH
Signed-off-by: Zhang Jianhua <zhangjianhua18@huawei.com>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210408093822.207917-1-zhangjianhua18@huawei.com
Driver Changes:
- Prepare for local/device memory support on DG1 by starting
to use it for kernel internal allocations: context, ring
and engine scratch (Matt A, CQ, Abdiel, Imre)
- Sandybridge fix to avoid hard hang on ring resume (Chris)
- Limit imported dma-buf size to int32 (Matt A)
- Double check heartbeat timeout before resetting (Chris)
- Use new tasklet API for execution list (Emil)
- Fix SPDX checkpats warnings (Chris)
- Fixes for various checkpatch warnings (Chris)
- Selftest improvements (Chris)
- Move the defer_request waiter active assertion to correct spot (Chris)
- Make local-memory probing a GT operation (Matt, Tvrtko)
- Protect against request freeing during cancellation on wedging (Chris)
- Retire unexpected starting state error dumping (Chris)
- Distinction of memory regions in debugging (Zbigniew)
- Always flush the submission queue on checking for idle (Chris)
- Consolidate 2big error check to helper (Matt)
- Decrease number of subplatform bits (Tvrtko)
- Remove unused internal request priority levels (Chris)
- Document the unused internal header bits in buddy allocator (Matt)
- Cleanup the region class/instance encoding (Matt)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/YGxksaZGXHnFxlwg@jlahtine-mobl.ger.corp.intel.com
drm_vblank_restore() exists because certain power saving states
can clobber the hardware frame counter. The way it does this is
by guesstimating how many frames were missed purely based on
the difference between the last stored timestamp vs. a newly
sampled timestamp.
If we should call this function before a full frame has
elapsed since we sampled the last timestamp we would end up
with a possibly slightly different timestamp value for the
same frame. Currently we will happily overwrite the already
stored timestamp for the frame with the new value. This
could cause userspace to observe two different timestamps
for the same frame (and the timestamp could even go
backwards depending on how much error we introduce when
correcting the timestamp based on the scanout position).
To avoid that let's not update the stored timestamp at all,
and instead we just fix up the last recorded hw vblank counter
value such that the already stored timestamp/seq number will
match. Thus the next time a vblank irq happens it will calculate
the correct diff between the current and stored hw vblank counter
values.
Sidenote: Another possible idea that came to mind would be to
do this correction only if the power really was removed since
the last time we sampled the hw frame counter. But to do that
we would need a robust way to detect when it has occurred. Some
possibilities could involve some kind of hardare power well
transition counter, or potentially we could store a magic value
in a scratch register that lives in the same power well. But
I'm not sure either of those exist, so would need an actual
investigation to find out. All of that is very hardware specific
of course, so would have to be done in the driver code.
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210218160305.16711-1-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
If the user specifies zero width/height cmdline mode i915 will
blow up as the fbdev path will bypass the regular fb sanity
check that would otherwise have refused to create a framebuffer
with zero width/height.
The reason I thought to try this is so that I can force a specific
depth for fbdev without actually having to hardcode the mode
on the kernel cmdline. Eg. if I pass video=0x0-8 I will get an
8bpp framebuffer at my monitor's native resolution.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190607162611.23514-2-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
When DRM_TOSHIBA_TC358762 is enabled and DRM_KMS_HELPER is disabled,
Kbuild gives the following warning:
WARNING: unmet direct dependencies detected for DRM_PANEL_BRIDGE
Depends on [n]: HAS_IOMEM [=y] && DRM_BRIDGE [=y] && DRM_KMS_HELPER [=n]
Selected by [y]:
- DRM_TOSHIBA_TC358762 [=y] && HAS_IOMEM [=y] && DRM [=y] && DRM_BRIDGE [=y] && OF [=y]
This is because DRM_TOSHIBA_TC358762 selects DRM_PANEL_BRIDGE,
without depending on or selecting DRM_KMS_HELPER,
despite that config option depending on DRM_KMS_HELPER.
Signed-off-by: Julian Braha <julianbraha@gmail.com>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210222215502.24487-1-julianbraha@gmail.com
commit f011951489 ("drm/mediatek: mtk_dpi: Create connector for bridges")
broke the display support for elm device since mtk_dpi calls
drm_bridge_attach with the flag DRM_BRIDGE_ATTACH_NO_CONNECTOR
while mtk_hdmi does not yet support this flag.
Fix this by accepting DRM_BRIDGE_ATTACH_NO_CONNECTOR in bridge attachment.
Implement the drm_bridge_funcs .detect() and .get_edid() operations, and
call drm_bridge_hpd_notify() to report HPD. This provides the
necessary API to support disabling connector creation.
In addition, the field 'conn' is removed from the mtk_hdmi struct since
mtk_hdmi don't create a connector. It is replaced with a pointer
'curr_conn' that points to the current connector which can be access
through the global state.
This patch is inspired by a similar patch for bridge/synopsys/dw-hdmi.c:
commit ec971aaa67
("drm: bridge: dw-hdmi: Make connector creation optional")
But with the difference that in mtk-hdmi only the option of not creating
a connector is supported.
Fixes: f011951489 ("drm/mediatek: mtk_dpi: Create connector for bridges")
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
The bridge operation '.enable' and the audio cb '.get_eld'
access hdmi->conn. In the future we will want to support
the flag DRM_BRIDGE_ATTACH_NO_CONNECTOR and then we will
not have direct access to the connector.
The atomic version '.atomic_enable' allows accessing the
current connector from the state.
This patch switches the bridge to the atomic version to
prepare access to the connector in later patches.
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
special i915-gem-next pull as requested
- Conversion to dma_resv_locking, obj->mm.lock is gone (Maarten, with
help from Thomas Hellström)
- watchdog (Tvrtko, one patch to cancel individual request from Chris)
- legacy ioctl cleanup (Jason+Ashutosh)
- i915-gem TODO and RFC process doc (me)
- i915_ prefix for vma_lookup (Liam Howlett) just because I spotted it
and put it in here too
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/YF24MHoOSjpKFEXA@phenom.ffwll.local
Iterating DisplayID blocks across sections (in EDID extensions) is
unnecessarily complicated for the caller. Implement DisplayID iterators
to go through all blocks in all sections.
Usage example:
const struct displayid_block *block;
struct displayid_iter iter;
displayid_iter_edid_begin(edid, &iter);
displayid_iter_for_each(block, &iter) {
/* operate on block */
}
displayid_iter_end(&iter);
When DisplayID is stored in EDID extensions, the DisplayID sections map
to extensions as described in VESA DisplayID v1.3 Appendix B: DisplayID
as an EDID Extension. This is implemented here.
When DisplayID is stored in its dedicated DDC device 0xA4, according to
VESA E-DDC v1.3, different rules apply for the structure. This is not
implemented here, as we don't currently use it, but the idea is you'd
have a different call for beginning the iteration, for example simply:
displayid_iter_begin(displayid, &iter);
instead of displayid_iter_edid_begin(), and everything else would be
hidden away in the iterator functions.
v2:
- sizeof(struct displayid_block) -> sizeof(*block) (Ville)
- remove __ prefix from displayid_iter_block
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/da3dead1752ab16c061f7bd248ac1a4268f7fefb.1617024940.git.jani.nikula@intel.com
This patch adds the missing MODULE_DEVICE_TABLE definitions on different
Mediatek drivers which generates correct modalias for automatic loading
when these drivers are compiled as an external module.
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Hsin-Yi Wang <hsinyi@chromium.org>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Currently the FRL training mode (Concurrent, Sequential) and
training type (Normal, Extended) are not defined properly and
are passed as bool values in drm_helpers for pcon
configuration for FRL training.
This patch:
-Add register masks for Sequential and Normal FRL training options.
-Fixes the drm_helpers for FRL Training configuration to use the
appropriate masks.
-Modifies the calls to the above drm_helpers in i915/intel_dp as per
the above change.
v2: Re-used the register masks for these options, instead of enum. (Ville)
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210323112422.1211-2-ankit.k.nautiyal@intel.com
An upcoming platform has a restriction that the FB stride must be
power-of-two aligned. To support framebuffer layouts that are not in
this layout add a logic that pads the tile rows to the POT aligned size.
The HW won't read the padding PTEs, so these don't have to point to an
allocated address, or even have their valid flag set. So use a NULL PTE
instead for instance the scratch page, which is simple and keeps the SG
table compact.
v2:
- Simplify plane_view_dst_stride(). (Ville)
- Pass pitch_tiles as unsigned int.
v3:
- Drop unintentional s/plane_state->rotation/plane_config->rotation/
change.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210325214808.2071517-24-imre.deak@intel.com
