The SBI v0.3 specification defines SRST (System Reset) extension which
provides a standard poweroff and reboot interface. This patch implements
SRST extension for the KVM Guest.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
We rename kvm_sbi_system_shutdown() to kvm_riscv_vcpu_sbi_system_reset()
and move it to vcpu_sbi.c so that it can be shared by SBI v0.1 shutdown
and SBI v0.3 SRST extension.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
We upgrade SBI spec version implemented by KVM RISC-V to v0.3 so
that Guest kernel can probe and use SBI extensions added by the
SBI v0.3 specification.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
Kernel uses __kvm_riscv_switch_to() and __kvm_switch_return() to switch
the context of host kernel and guest kernel. Several CSRs belonging to the
context will be read and written during the context switch. To ensure
atomic read-modify-write control of CSR and ordering of CSR accesses, some
hardware blocks flush the pipeline when writing a CSR. In this
circumstance, grouping CSR executions together as much as possible can
reduce the performance impact of the pipeline. Therefore, this commit
reorders the CSR instructions to enhance the context switch performance..
Signed-off-by: Vincent Chen <vincent.chen@sifive.com>
Suggested-by: Hsinyi Lee <hsinyi.lee@sifive.com>
Suggested-by: Fu-Ching Yang <fu-ching.yang@sifive.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
Eliminate the following coccicheck warning:
./arch/riscv/kvm/vcpu_sbi_v01.c:117:2-3: Unneeded semicolon
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
RISC-V can do PC-relative jumps with a 32bit range using the following
two instructions:
auipc t0, imm20 ; t0 = PC + imm20 * 2^12
jalr ra, t0, imm12 ; ra = PC + 4, PC = t0 + imm12
Crucially both the 20bit immediate imm20 and the 12bit immediate imm12
are treated as two's-complement signed values. For this reason the
immediates are usually calculated like this:
imm20 = (offset + 0x800) >> 12
imm12 = offset & 0xfff
..where offset is the signed offset from the auipc instruction. When
the 11th bit of offset is 0 the addition of 0x800 doesn't change the top
20 bits and imm12 considered positive. When the 11th bit is 1 the carry
of the addition by 0x800 means imm20 is one higher, but since imm12 is
then considered negative the two's complement representation means it
all cancels out nicely.
However, this addition by 0x800 (2^11) means an offset greater than or
equal to 2^31 - 2^11 would overflow so imm20 is considered negative and
result in a backwards jump. Similarly the lower range of offset is also
moved down by 2^11 and hence the true 32bit range is
[-2^31 - 2^11, 2^31 - 2^11)
Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
Fixes: e2c0cdfba7 ("RISC-V: User-facing API")
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Move set_notify_resume and tracehook_notify_resume into resume_user_mode.h.
While doing that rename tracehook_notify_resume to resume_user_mode_work.
Update all of the places that included tracehook.h for these functions to
include resume_user_mode.h instead.
Update all of the callers of tracehook_notify_resume to call
resume_user_mode_work.
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lkml.kernel.org/r/20220309162454.123006-12-ebiederm@xmission.com
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Rename tracehook_report_syscall_{entry,exit} to
ptrace_report_syscall_{entry,exit} and place them in ptrace.h
There is no longer any generic tracehook infractructure so make
these ptrace specific functions ptrace specific.
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lkml.kernel.org/r/20220309162454.123006-3-ebiederm@xmission.com
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Rewrote the RISC-V memmove() assembly implementation. The
previous implementation did not check memory alignment and it
compared 2 pointers with a signed comparison. The misaligned
memory access would cause the kernel to crash on systems that
did not emulate it in firmware and did not support it in hardware.
Firmware emulation is slow and may not exist. The RISC-V spec
does not guarantee that support for misaligned memory accesses
will exist. It should not be depended on.
This patch now checks for XLEN granularity of co-alignment between
the pointers. Failing that, copying is done by loading from the 2
contiguous and naturally aligned XLEN memory locations containing
the overlapping XLEN sized data to be copied. The data is shifted
into the correct place and binary or'ed together on each
iteration. The result is then stored into the corresponding
naturally aligned XLEN sized location in the destination. For
unaligned data at the terminations of the regions to be copied
or for copies less than (2 * XLEN) in size, byte copy is used.
This patch also now uses unsigned comparison for the pointers and
migrates to the newer assembler annotations from the now deprecated
ones.
Signed-off-by: Michael T. Kloos <michael@michaelkloos.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
The alternative mechanism needs runtime code patching, it can't work
on XIP_KERNEL. And the errata workarounds are implemented via the
alternative mechanism. So add !XIP_KERNEL dependency for alternative
and erratas.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Fixes: 44c9225729 ("RISC-V: enable XIP")
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
We enable RISC-V SBI CPU Idle driver for QEMU virt machine to test
SBI HSM Supend on QEMU.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
The hart registers and CSRs are not preserved in non-retentative
suspend state so we provide arch specific helper functions which
will save/restore hart context upon entry/exit to non-retentive
suspend state. These helper functions can be used by cpuidle
drivers for non-retentive suspend entry/exit.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Guo Ren <guoren@kernel.org>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
The low-level relocate() function enables mmu and relocates
execution to link-time addresses. We rename relocate() function
to relocate_enable_mmu() function which is more informative.
Also, the relocate_enable_mmu() function will be used in the
resume path when a CPU wakes-up from a non-retentive suspend
so we make it global symbol.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Guo Ren <guoren@kernel.org>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
We force select CPU_PM and provide asm/cpuidle.h so that we can
use CPU IDLE drivers for Linux RISC-V kernel.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Anup Patel <apatel@vetanamicro.com>
Reviewed-by: Guo Ren <guoren@kernel.org>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
This series updates the Microchip Icicle Kit device tree by adding a
host of peripherals, and some updates to the memory map. In addition,
the device tree has been split into a third part, which contains "soft"
peripherals that are in the fpga fabric.
Several of the entries are for peripherals that have not get had their
drivers upstreamed, so in those cases the dt bindings are included where
appropriate in order to avoid the many "DT compatible string <x> appears
un-documented" errors.
* palmer/riscv-microchip:
MAINTAINERS: update riscv/microchip entry
riscv: dts: microchip: add new peripherals to icicle kit device tree
riscv: dts: microchip: update peripherals in icicle kit device tree
riscv: dts: microchip: refactor icicle kit device tree
riscv: dts: microchip: add fpga fabric section to icicle kit
riscv: dts: microchip: use clk defines for icicle kit
dt-bindings: pwm: add microchip corepwm binding
dt-bindings: gpio: add bindings for microchip mpfs gpio
dt-bindings: rtc: add bindings for microchip mpfs rtc
dt-bindings: soc/microchip: add info about services to mpfs sysctrl
dt-bindings: soc/microchip: update syscontroller compatibles
dt-bindings: clk: microchip: Add Microchip PolarFire host binding
Add new peripherals to the MPFS, and enable them in the Icicle kit
device tree:
2x SPI, QSPI, 3x GPIO, 2x I2C, Real Time Counter, PCIE controller,
USB host & system controller.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Assorted minor changes to the MPFS/Icicle kit device tree:
- enable mmuart4 instead of mmuart0
- remove sifive pdma
- split memory node to match updated fpga design
- move stdout path to serial1 to avoid collision with
bootloader running on the e51
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Split the device tree for the Microchip MPFS into two sections by adding
microchip-mpfs-fabric.dtsi, which contains peripherals contained in the
FPGA fabric.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Update the Microchip Icicle kit device tree by replacing clock
related magic numbers with their defined counterparts.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
* Fixes for a handful of KASAN-related crashes.
* A fix to avoid a crash during boot for SPARSEMEM && !SPARSEMEM_VMEMMAP
configurations.
* A fix to stop reporting some incorrect errors under DEBUG_VIRTUAL.
* A fix for the K210's device tree to properly populate the interrupt
map, so hart1 will get interrupts again.
-----BEGIN PGP SIGNATURE-----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=Ff5J
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-5.17-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- Fixes for a handful of KASAN-related crashes.
- A fix to avoid a crash during boot for SPARSEMEM &&
!SPARSEMEM_VMEMMAP configurations.
- A fix to stop reporting some incorrect errors under DEBUG_VIRTUAL.
- A fix for the K210's device tree to properly populate the interrupt
map, so hart1 will get interrupts again.
* tag 'riscv-for-linus-5.17-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: dts: k210: fix broken IRQs on hart1
riscv: Fix kasan pud population
riscv: Move high_memory initialization to setup_bootmem
riscv: Fix config KASAN && DEBUG_VIRTUAL
riscv: Fix DEBUG_VIRTUAL false warnings
riscv: Fix config KASAN && SPARSEMEM && !SPARSE_VMEMMAP
riscv: Fix is_linear_mapping with recent move of KASAN region
Commit 67d96729a9 ("riscv: Update Canaan Kendryte K210 device tree")
incorrectly removed two entries from the PLIC interrupt-controller node's
interrupts-extended property.
The PLIC driver cannot know the mapping between hart contexts and hart ids,
so this information has to be provided by device tree, as specified by the
PLIC device tree binding.
The PLIC driver uses the interrupts-extended property, and initializes the
hart context registers in the exact same order as provided by the
interrupts-extended property.
In other words, if we don't specify the S-mode interrupts, the PLIC driver
will simply initialize the hart0 S-mode hart context with the hart1 M-mode
configuration. It is therefore essential to specify the S-mode IRQs even
though the system itself will only ever be running in M-mode.
Re-add the S-mode interrupts, so that we get working IRQs on hart1 again.
Cc: <stable@vger.kernel.org>
Fixes: 67d96729a9 ("riscv: Update Canaan Kendryte K210 device tree")
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
In sv48, the kasan inner regions are not aligned on PGDIR_SIZE and then
when we populate the kasan linear mapping region, we clear the kasan
vmalloc region which is in the same PGD.
Fix this by copying the content of the kasan early pud after allocating a
new PGD for the first time.
Fixes: e8a62cc26d ("riscv: Implement sv48 support")
Signed-off-by: Alexandre Ghiti <alexandre.ghiti@canonical.com>
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
high_memory used to be initialized in mem_init, way after setup_bootmem.
But a call to dma_contiguous_reserve in this function gives rise to the
below warning because high_memory is equal to 0 and is used at the very
beginning at cma_declare_contiguous_nid.
It went unnoticed since the move of the kasan region redefined
KERN_VIRT_SIZE so that it does not encompass -1 anymore.
Fix this by initializing high_memory in setup_bootmem.
------------[ cut here ]------------
virt_to_phys used for non-linear address: ffffffffffffffff (0xffffffffffffffff)
WARNING: CPU: 0 PID: 0 at arch/riscv/mm/physaddr.c:14 __virt_to_phys+0xac/0x1b8
Modules linked in:
CPU: 0 PID: 0 Comm: swapper Not tainted 5.17.0-rc1-00007-ga68b89289e26 #27
Hardware name: riscv-virtio,qemu (DT)
epc : __virt_to_phys+0xac/0x1b8
ra : __virt_to_phys+0xac/0x1b8
epc : ffffffff80014922 ra : ffffffff80014922 sp : ffffffff84a03c30
gp : ffffffff85866c80 tp : ffffffff84a3f180 t0 : ffffffff86bce657
t1 : fffffffef09406e8 t2 : 0000000000000000 s0 : ffffffff84a03c70
s1 : ffffffffffffffff a0 : 000000000000004f a1 : 00000000000f0000
a2 : 0000000000000002 a3 : ffffffff8011f408 a4 : 0000000000000000
a5 : 0000000000000000 a6 : 0000000000f00000 a7 : ffffffff84a03747
s2 : ffffffd800000000 s3 : ffffffff86ef4000 s4 : ffffffff8467f828
s5 : fffffff800000000 s6 : 8000000000006800 s7 : 0000000000000000
s8 : 0000000480000000 s9 : 0000000080038ea0 s10: 0000000000000000
s11: ffffffffffffffff t3 : ffffffff84a035c0 t4 : fffffffef09406e8
t5 : fffffffef09406e9 t6 : ffffffff84a03758
status: 0000000000000100 badaddr: 0000000000000000 cause: 0000000000000003
[<ffffffff8322ef4c>] cma_declare_contiguous_nid+0xf2/0x64a
[<ffffffff83212a58>] dma_contiguous_reserve_area+0x46/0xb4
[<ffffffff83212c3a>] dma_contiguous_reserve+0x174/0x18e
[<ffffffff83208fc2>] paging_init+0x12c/0x35e
[<ffffffff83206bd2>] setup_arch+0x120/0x74e
[<ffffffff83201416>] start_kernel+0xce/0x68c
irq event stamp: 0
hardirqs last enabled at (0): [<0000000000000000>] 0x0
hardirqs last disabled at (0): [<0000000000000000>] 0x0
softirqs last enabled at (0): [<0000000000000000>] 0x0
softirqs last disabled at (0): [<0000000000000000>] 0x0
---[ end trace 0000000000000000 ]---
Fixes: f7ae02333d ("riscv: Move KASAN mapping next to the kernel mapping")
Signed-off-by: Alexandre Ghiti <alexandre.ghiti@canonical.com>
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
__virt_to_phys function is called very early in the boot process (ie
kasan_early_init) so it should not be instrumented by KASAN otherwise it
bugs.
Fix this by declaring phys_addr.c as non-kasan instrumentable.
Signed-off-by: Alexandre Ghiti <alexandre.ghiti@canonical.com>
Fixes: 8ad8b72721 (riscv: Add KASAN support)
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
KERN_VIRT_SIZE used to encompass the kernel mapping before it was
redefined when moving the kasan mapping next to the kernel mapping to only
match the maximum amount of physical memory.
Then, kernel mapping addresses that go through __virt_to_phys are now
declared as wrong which is not true, one can use __virt_to_phys on such
addresses.
Fix this by redefining the condition that matches wrong addresses.
Fixes: f7ae02333d ("riscv: Move KASAN mapping next to the kernel mapping")
Signed-off-by: Alexandre Ghiti <alexandre.ghiti@canonical.com>
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
In order to get the pfn of a struct page* when sparsemem is enabled
without vmemmap, the mem_section structures need to be initialized which
happens in sparse_init.
But kasan_early_init calls pfn_to_page way before sparse_init is called,
which then tries to dereference a null mem_section pointer.
Fix this by removing the usage of this function in kasan_early_init.
Fixes: 8ad8b72721 ("riscv: Add KASAN support")
Signed-off-by: Alexandre Ghiti <alexandre.ghiti@canonical.com>
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
The KASAN region was recently moved between the linear mapping and the
kernel mapping, is_linear_mapping used to check the validity of an
address by using the start of the kernel mapping, which is now wrong.
Fix this by using the maximum size of the physical memory.
Fixes: f7ae02333d ("riscv: Move KASAN mapping next to the kernel mapping")
Signed-off-by: Alexandre Ghiti <alexandre.ghiti@canonical.com>
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
* A fix for the K210 sdcard defconfig, to avoid using a fixed delay for
the root FS.
* A fix to make sure there's a proper call frame for
trace_hardirqs_{on,off}().
---
There are a handful of additional fixes in flight, but not for this
week.
-----BEGIN PGP SIGNATURE-----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=1a16
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-5.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- A fix for the K210 sdcard defconfig, to avoid using a
fixed delay for the root FS
- A fix to make sure there's a proper call frame for
trace_hardirqs_{on,off}().
* tag 'riscv-for-linus-5.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: fix oops caused by irqsoff latency tracer
riscv: fix nommu_k210_sdcard_defconfig
There are many different ways that access_ok() is defined across
architectures, but in the end, they all just compare against the
user_addr_max() value or they accept anything.
Provide one definition that works for most architectures, checking
against TASK_SIZE_MAX for user processes or skipping the check inside
of uaccess_kernel() sections.
For architectures without CONFIG_SET_FS(), this should be the fastest
check, as it comes down to a single comparison of a pointer against a
compile-time constant, while the architecture specific versions tend to
do something more complex for historic reasons or get something wrong.
Type checking for __user annotations is handled inconsistently across
architectures, but this is easily simplified as well by using an inline
function that takes a 'const void __user *' argument. A handful of
callers need an extra __user annotation for this.
Some architectures had trick to use 33-bit or 65-bit arithmetic on the
addresses to calculate the overflow, however this simpler version uses
fewer registers, which means it can produce better object code in the
end despite needing a second (statically predicted) branch.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Mark Rutland <mark.rutland@arm.com> [arm64, asm-generic]
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Stafford Horne <shorne@gmail.com>
Acked-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
On some architectures, access_ok() does not do any argument type
checking, so replacing the definition with a generic one causes
a few warnings for harmless issues that were never caught before.
Fix the ones that I found either through my own test builds or
that were reported by the 0-day bot.
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Nine architectures are still missing __{get,put}_kernel_nofault:
alpha, ia64, microblaze, nds32, nios2, openrisc, sh, sparc32, xtensa.
Add a generic version that lets everything use the normal
copy_{from,to}_kernel_nofault() code based on these, removing the last
use of get_fs()/set_fs() from architecture-independent code.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Instead of an arbitrary delay, use the "rootwait" kernel option to wait
for the mmc root device to be ready.
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Fixes: 7e09fd3994 ("riscv: Add Canaan Kendryte K210 SD card defconfig")
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
This implements Sv57 support at runtime. The kernel will try to boot
with 5-level page table firstly , and will fallback to 4-level if the HW
does not support it. And it will finally fallback to 3-level if the HW
alse does not support sv48.
* riscv-sv57:
riscv: mm: Support kasan for sv57
riscv: mm: Set sv57 on defaultly
riscv: mm: Prepare pt_ops helper functions for sv57
riscv: mm: Control p4d's folding by pgtable_l5_enabled
* A set of three fixes, all aimed at fixing some fallout from the recent
sparse hart ID support.
-----BEGIN PGP SIGNATURE-----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=PQE3
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-5.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
"A set of three fixes, all aimed at fixing some fallout from the recent
sparse hart ID support"
* tag 'riscv-for-linus-5.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
RISC-V: Fix IPI/RFENCE hmask on non-monotonic hartid ordering
RISC-V: Fix handling of empty cpu masks
RISC-V: Fix hartid mask handling for hartid 31 and up
This patchset add kasan_populate and kasan_shallow_populate for sv57,
and is tested on both qemu and unmatched with CONFIG_KASAN and
CONFIG_KASAN_VMALLOC on.
Signed-off-by: Qinglin Pan <panqinglin2020@iscas.ac.cn>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
This patch sets sv57 on defaultly if CONFIG_64BIT. And do fallback to try
to set sv48 on boot time if sv57 is not supported in current hardware.
Signed-off-by: Qinglin Pan <panqinglin2020@iscas.ac.cn>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
This patch prepare some pt_ops helper functions which will be used in
creating sv57 mappings during boot time.
Signed-off-by: Qinglin Pan <panqinglin2020@iscas.ac.cn>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
To determine pgtable level at boot time, we can not use helper functions
in include/asm-generic/pgtable-nop4d.h and must implement these
functions. This patch uses pgtable_l5_enabled variable instead of
including pgtable-nop4d.h to controle p4d's folding, and implements
corresponding helper functions.
Signed-off-by: Qinglin Pan <panqinglin2020@iscas.ac.cn>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
satp_mode is never modified after init, so it can be marked as
__ro_after_init.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
If the boot CPU does not have the lowest hartid, "hartid - hbase" can
become negative, leading to an incorrect hmask, causing userspace to
crash with SEGV. This is observed on e.g. Starlight Beta, where cpuid 1
maps to hartid 0, and cpuid 0 maps to hartid 1.
Fix this by detecting this case, and shifting the accumulated mask and
updating hbase, if possible.
Fixes: 26fb751ca3 ("RISC-V: Do not use cpumask data structure for hartid bitmap")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Tested-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
The cpumask rework slightly changed the behavior of the code. Fix this
by treating an empty cpumask as meaning all online CPUs.
Extracted from a patch by Atish Patra <atishp@rivosinc.com>.
Reported-by: Jessica Clarke <jrtc27@jrtc27.com>
Fixes: 26fb751ca3 ("RISC-V: Do not use cpumask data structure for hartid bitmap")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Jessica reports that using "1 << hartid" causes undefined behavior for
hartid 31 and up.
Fix this by using the BIT() helper instead of an explicit shift.
Reported-by: Jessica Clarke <jrtc27@jrtc27.com>
Fixes: 26fb751ca3 ("RISC-V: Do not use cpumask data structure for hartid bitmap")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
* A fix to avoid undefined behavior when stack backtracing, which
manifests in GCC as incorrect stack addresses.
* A few fixes for the XIP kernels.
* A fix to tracking NUMA state on CPU hotplug.
* Support for the recently relesaed binutils-2.38, which changed the
default ISA version to one without CSRs or fence.i in I.
-----BEGIN PGP SIGNATURE-----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=MVlA
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-5.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- A fix to avoid undefined behavior when stack backtracing, which
manifests in GCC as incorrect stack addresses
- A few fixes for the XIP kernels
- A fix to tracking NUMA state on CPU hotplug
- Support for the recently relesaed binutils-2.38, which changed the
default ISA version to one without CSRs or fence.i in 'I' extension
* tag 'riscv-for-linus-5.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: fix build with binutils 2.38
riscv: cpu-hotplug: clear cpu from numa map when teardown
riscv: extable: fix err reg writing in dedicated uaccess handler
riscv/mm: Add XIP_FIXUP for riscv_pfn_base
riscv/mm: Add XIP_FIXUP for phys_ram_base
riscv: Fix XIP_FIXUP_FLASH_OFFSET
riscv: eliminate unreliable __builtin_frame_address(1)
From version 2.38, binutils default to ISA spec version 20191213. This
means that the csr read/write (csrr*/csrw*) instructions and fence.i
instruction has separated from the `I` extension, become two standalone
extensions: Zicsr and Zifencei. As the kernel uses those instruction,
this causes the following build failure:
CC arch/riscv/kernel/vdso/vgettimeofday.o
<<BUILDDIR>>/arch/riscv/include/asm/vdso/gettimeofday.h: Assembler messages:
<<BUILDDIR>>/arch/riscv/include/asm/vdso/gettimeofday.h:71: Error: unrecognized opcode `csrr a5,0xc01'
<<BUILDDIR>>/arch/riscv/include/asm/vdso/gettimeofday.h:71: Error: unrecognized opcode `csrr a5,0xc01'
<<BUILDDIR>>/arch/riscv/include/asm/vdso/gettimeofday.h:71: Error: unrecognized opcode `csrr a5,0xc01'
<<BUILDDIR>>/arch/riscv/include/asm/vdso/gettimeofday.h:71: Error: unrecognized opcode `csrr a5,0xc01'
The fix is to specify those extensions explicitely in -march. However as
older binutils version do not support this, we first need to detect
that.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Tested-by: Alexandre Ghiti <alexandre.ghiti@canonical.com>
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
There is numa_add_cpu() when cpus online, accordingly, there should be
numa_remove_cpu() when cpus offline.
Signed-off-by: Pingfan Liu <kernelfans@gmail.com>
Fixes: 4f0e8eef77 ("riscv: Add numa support for riscv64 platform")
Cc: stable@vger.kernel.org
[Palmer: Add missing NUMA include]
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Mayuresh reported commit 20802d8d47 ("riscv: extable: add a dedicated
uaccess handler") breaks the writev02 test case in LTP. This is due to
the err reg isn't correctly set with the errno(-EFAULT in writev02
case). First of all, the err and zero regs are reg numbers rather than
reg offsets in struct pt_regs; Secondly, regs_set_gpr() should write
the regs when offset isn't zero(zero means epc)
Fix it by correcting regs_set_gpr() logic and passing the correct reg
offset to it.
Reported-by: Mayuresh Chitale <mchitale@ventanamicro.com>
Fixes: 20802d8d47 ("riscv: extable: add a dedicated uaccess handler")
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
- A couple of fixes when handling an exception while a SError has been
delivered
- Workaround for Cortex-A510's single-step[ erratum
-----BEGIN PGP SIGNATURE-----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=Mbx/
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-fixes-5.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 fixes for 5.17, take #2
- A couple of fixes when handling an exception while a SError has been
delivered
- Workaround for Cortex-A510's single-step[ erratum
This manifests as a crash early in boot on VexRiscv.
Signed-off-by: Myrtle Shah <gatecat@ds0.me>
[Palmer: split commit]
Fixes: 44c9225729 ("RISC-V: enable XIP")
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
This manifests as a crash early in boot on VexRiscv.
Signed-off-by: Myrtle Shah <gatecat@ds0.me>
[Palmer: split commit]
Fixes: 6d7f91d914 ("riscv: Get rid of CONFIG_PHYS_RAM_BASE in kernel physical address conversion")
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
There were several problems with the calculation. Not only was an 'and'
being computed into t1 but thrown away; but the 'and' itself would
cause problems if the granularity of the XIP physical address was less
than XIP_OFFSET - in my case I had the kernel image at 2MB in SPI flash.
Fixes: f9ace4ede4 ("riscv: remove .text section size limitation for XIP")
Cc: stable@vger.kernel.org
Signed-off-by: Myrtle Shah <gatecat@ds0.me>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
I tried different pieces of code which uses __builtin_frame_address(1)
(with both gcc version 7.5.0 and 10.3.0) to verify whether it works as
expected on riscv64. The result is negative.
What the compiler had generated is as below:
31 fp = (unsigned long)__builtin_frame_address(1);
0xffffffff80006024 <+200>: ld s1,0(s0)
It takes '0(s0)' as the address of frame 1 (caller), but the actual address
should be '-16(s0)'.
| ... | <-+
+-----------------+ |
| return address | |
| previous fp | |
| saved registers | |
| local variables | |
$fp --> | ... | |
+-----------------+ |
| return address | |
| previous fp --------+
| saved registers |
$sp --> | local variables |
+-----------------+
This leads the kernel can not dump the full stack trace on riscv.
[ 7.222126][ T1] Call Trace:
[ 7.222804][ T1] [<ffffffff80006058>] dump_backtrace+0x2c/0x3a
This problem is not exposed on most riscv builds just because the '0(s0)'
occasionally is the address frame 2 (caller's caller), if only ra and fp
are stored in frame 1 (caller).
| ... | <-+
+-----------------+ |
| return address | |
$fp --> | previous fp | |
+-----------------+ |
| return address | |
| previous fp --------+
| saved registers |
$sp --> | local variables |
+-----------------+
This could be a *bug* of gcc that should be fixed. But as noted in gcc
manual "Calling this function with a nonzero argument can have
unpredictable effects, including crashing the calling program.", let's
remove the '__builtin_frame_address(1)' in backtrace code.
With this fix now it can show full stack trace:
[ 10.444838][ T1] Call Trace:
[ 10.446199][ T1] [<ffffffff8000606c>] dump_backtrace+0x2c/0x3a
[ 10.447711][ T1] [<ffffffff800060ac>] show_stack+0x32/0x3e
[ 10.448710][ T1] [<ffffffff80a005c0>] dump_stack_lvl+0x58/0x7a
[ 10.449941][ T1] [<ffffffff80a005f6>] dump_stack+0x14/0x1c
[ 10.450929][ T1] [<ffffffff804c04ee>] ubsan_epilogue+0x10/0x5a
[ 10.451869][ T1] [<ffffffff804c092e>] __ubsan_handle_load_invalid_value+0x6c/0x78
[ 10.453049][ T1] [<ffffffff8018f834>] __pagevec_release+0x62/0x64
[ 10.455476][ T1] [<ffffffff80190830>] truncate_inode_pages_range+0x132/0x5be
[ 10.456798][ T1] [<ffffffff80190ce0>] truncate_inode_pages+0x24/0x30
[ 10.457853][ T1] [<ffffffff8045bb04>] kill_bdev+0x32/0x3c
...
Signed-off-by: Changbin Du <changbin.du@gmail.com>
Fixes: eac2f3059e ("riscv: stacktrace: fix the riscv stacktrace when CONFIG_FRAME_POINTER enabled")
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
The SBI implementation version returned by KVM RISC-V should be the
Host Linux version code.
Fixes: c62a768597 ("RISC-V: KVM: Add SBI v0.2 base extension")
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
Those applications that run in VU mode and access the time CSR cause
a virtual instruction trap as Guest kernel currently does not
initialize the scounteren CSR.
To fix this, we should make CY, TM, and IR counters accessibile
by default in VU mode (similar to OpenSBI).
Fixes: a33c72faf2 ("RISC-V: KVM: Implement VCPU create, init and
destroy functions")
Cc: stable@vger.kernel.org
Signed-off-by: Mayuresh Chitale <mchitale@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
In kvm_arch_vcpu_ioctl_run() we enter an RCU extended quiescent state
(EQS) by calling guest_enter_irqoff(), and unmask IRQs prior to exiting
the EQS by calling guest_exit(). As the IRQ entry code will not wake RCU
in this case, we may run the core IRQ code and IRQ handler without RCU
watching, leading to various potential problems.
Additionally, we do not inform lockdep or tracing that interrupts will
be enabled during guest execution, which caan lead to misleading traces
and warnings that interrupts have been enabled for overly-long periods.
This patch fixes these issues by using the new timing and context
entry/exit helpers to ensure that interrupts are handled during guest
vtime but with RCU watching, with a sequence:
guest_timing_enter_irqoff();
guest_state_enter_irqoff();
< run the vcpu >
guest_state_exit_irqoff();
< take any pending IRQs >
guest_timing_exit_irqoff();
Since instrumentation may make use of RCU, we must also ensure that no
instrumented code is run during the EQS. I've split out the critical
section into a new kvm_riscv_enter_exit_vcpu() helper which is marked
noinstr.
Fixes: 99cdc6c18c ("RISC-V: Add initial skeletal KVM support")
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Anup Patel <anup@brainfault.org>
Cc: Atish Patra <atishp@atishpatra.org>
Cc: Frederic Weisbecker <frederic@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Tested-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Anup Patel <anup@brainfault.org>
-----BEGIN PGP SIGNATURE-----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=RKW4
-----END PGP SIGNATURE-----
Merge tag 'bitmap-5.17-rc1' of git://github.com/norov/linux
Pull bitmap updates from Yury Norov:
- introduce for_each_set_bitrange()
- use find_first_*_bit() instead of find_next_*_bit() where possible
- unify for_each_bit() macros
* tag 'bitmap-5.17-rc1' of git://github.com/norov/linux:
vsprintf: rework bitmap_list_string
lib: bitmap: add performance test for bitmap_print_to_pagebuf
bitmap: unify find_bit operations
mm/percpu: micro-optimize pcpu_is_populated()
Replace for_each_*_bit_from() with for_each_*_bit() where appropriate
find: micro-optimize for_each_{set,clear}_bit()
include/linux: move for_each_bit() macros from bitops.h to find.h
cpumask: replace cpumask_next_* with cpumask_first_* where appropriate
tools: sync tools/bitmap with mother linux
all: replace find_next{,_zero}_bit with find_first{,_zero}_bit where appropriate
cpumask: use find_first_and_bit()
lib: add find_first_and_bit()
arch: remove GENERIC_FIND_FIRST_BIT entirely
include: move find.h from asm_generic to linux
bitops: move find_bit_*_le functions from le.h to find.h
bitops: protect find_first_{,zero}_bit properly
* Support for sv48 paging.
* Hart ID mappings are now sparse, which enables more CPUs to come up on
systems with sparse hart IDs.
* A handful of cleanups and fixes.
-----BEGIN PGP SIGNATURE-----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=WKqE
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-5.17-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull more RISC-V updates from Palmer Dabbelt:
- Support for sv48 paging
- Hart ID mappings are now sparse, which enables more CPUs to come up
on systems with sparse hart IDs
- A handful of cleanups and fixes
* tag 'riscv-for-linus-5.17-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (27 commits)
RISC-V: nommu_virt: Drop unused SLAB_MERGE_DEFAULT
RISC-V: Remove redundant err variable
riscv: dts: sifive unmatched: Add gpio poweroff
riscv: canaan: remove useless select of non-existing config SYSCON
RISC-V: Do not use cpumask data structure for hartid bitmap
RISC-V: Move spinwait booting method to its own config
RISC-V: Move the entire hart selection via lottery to SMP
RISC-V: Use __cpu_up_stack/task_pointer only for spinwait method
RISC-V: Do not print the SBI version during HSM extension boot print
RISC-V: Avoid using per cpu array for ordered booting
riscv: default to CONFIG_RISCV_SBI_V01=n
riscv: fix boolconv.cocci warnings
riscv: Explicit comment about user virtual address space size
riscv: Use pgtable_l4_enabled to output mmu_type in cpuinfo
riscv: Implement sv48 support
asm-generic: Prepare for riscv use of pud_alloc_one and pud_free
riscv: Allow to dynamically define VA_BITS
riscv: Introduce functions to switch pt_ops
riscv: Split early kasan mapping to prepare sv48 introduction
riscv: Move KASAN mapping next to the kernel mapping
...
Our nommu_virt_defconfig set SLOB=y and SLAB_MERGE_DEFAULT=n. As of
eb52c0fc23 ("mm: Make SLAB_MERGE_DEFAULT depend on SL[AU]B") it's no
longer necessary to set the second, which appears to never have had any
effect for SLOB=y anyway.
This was suggested by savedefconfig.
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Return value from user_regset_copyin() directly instead of taking this
in another redundant variable.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn>
Signed-off-by: CGEL ZTE <cgel.zte@gmail.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Some of the GPIO pins on the Unmatched are wire up to control the power
of the board, indicate that in the device tree.
Signed-off-by: Ron Economos <w6rz@comcast.net>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Currently, SBI APIs accept a hartmask that is generated from struct
cpumask. Cpumask data structure can hold upto NR_CPUs value. Thus, it
is not the correct data structure for hartids as it can be higher
than NR_CPUs for platforms with sparse or discontguous hartids.
Remove all association between hartid mask and struct cpumask.
Reviewed-by: Anup Patel <anup@brainfault.org> (For Linux RISC-V changes)
Acked-by: Anup Patel <anup@brainfault.org> (For KVM RISC-V changes)
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
The spinwait booting method should only be used for platforms with older
firmware without SBI HSM extension or M-mode firmware because spinwait
method can't support cpu hotplug, kexec or sparse hartid. It is better
to move the entire spinwait implementation to its own config which can
be disabled if required. It is enabled by default to maintain backward
compatibility and M-mode Linux.
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
The booting hart selection via lottery is only useful for SMP systems.
Moreover, the lottery selection is only necessary for systems using
spinwait booting method. It is better to keep the entire lottery
selection together so that it can be disabled in future.
Move the lottery selection code to under CONFIG_SMP.
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
The __cpu_up_stack/task_pointer array is only used for spinwait method
now. The per cpu array based lookup is also fragile for platforms with
discontiguous/sparse hartids. The spinwait method is only used for
M-mode Linux or older firmwares without SBI HSM extension. For general
Linux systems, ordered booting method is preferred anyways to support
cpu hotplug and kexec.
Make sure that __cpu_up_stack/task_pointer is only used for spinwait
method. Take this opportunity to rename it to
__cpu_spinwait_stack/task_pointer to emphasize the purpose as well.
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
The HSM extension information log also prints the SBI version v0.2. This
is misleading as the underlying firmware SBI version may be different
from v0.2.
Remove the unncessary printing of SBI version.
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Currently both order booting and spinwait approach uses a per cpu
array to update stack & task pointer. This approach will not work for the
following cases.
1. If NR_CPUs are configured to be less than highest hart id.
2. A platform has sparse hartid.
This issue can be fixed for ordered booting as the booting cpu brings up
one cpu at a time using SBI HSM extension which has opaque parameter
that is unused until now.
Introduce a common secondary boot data structure that can store the stack
and task pointer. Secondary harts will use this data while booting up
to setup the sp & tp.
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
The SBI 0.1 specification is obsolete. The current version is 0.3.
Hence we should not rely by default on SBI 0.1 being implemented.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Merge more updates from Andrew Morton:
"55 patches.
Subsystems affected by this patch series: percpu, procfs, sysctl,
misc, core-kernel, get_maintainer, lib, checkpatch, binfmt, nilfs2,
hfs, fat, adfs, panic, delayacct, kconfig, kcov, and ubsan"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (55 commits)
lib: remove redundant assignment to variable ret
ubsan: remove CONFIG_UBSAN_OBJECT_SIZE
kcov: fix generic Kconfig dependencies if ARCH_WANTS_NO_INSTR
lib/Kconfig.debug: make TEST_KMOD depend on PAGE_SIZE_LESS_THAN_256KB
btrfs: use generic Kconfig option for 256kB page size limit
arch/Kconfig: split PAGE_SIZE_LESS_THAN_256KB from PAGE_SIZE_LESS_THAN_64KB
configs: introduce debug.config for CI-like setup
delayacct: track delays from memory compact
Documentation/accounting/delay-accounting.rst: add thrashing page cache and direct compact
delayacct: cleanup flags in struct task_delay_info and functions use it
delayacct: fix incomplete disable operation when switch enable to disable
delayacct: support swapin delay accounting for swapping without blkio
panic: remove oops_id
panic: use error_report_end tracepoint on warnings
fs/adfs: remove unneeded variable make code cleaner
FAT: use io_schedule_timeout() instead of congestion_wait()
hfsplus: use struct_group_attr() for memcpy() region
nilfs2: remove redundant pointer sbufs
fs/binfmt_elf: use PT_LOAD p_align values for static PIE
const_structs.checkpatch: add frequently used ops structs
...
Patch series "mm: percpu: Cleanup percpu first chunk function".
When supporting page mapping percpu first chunk allocator on arm64, we
found there are lots of duplicated codes in percpu embed/page first chunk
allocator. This patchset is aimed to cleanup them and should no function
change.
The currently supported status about 'embed' and 'page' in Archs shows
below,
embed: NEED_PER_CPU_PAGE_FIRST_CHUNK
page: NEED_PER_CPU_EMBED_FIRST_CHUNK
embed page
------------------------
arm64 Y Y
mips Y N
powerpc Y Y
riscv Y N
sparc Y Y
x86 Y Y
------------------------
There are two interfaces about percpu first chunk allocator,
extern int __init pcpu_embed_first_chunk(size_t reserved_size, size_t dyn_size,
size_t atom_size,
pcpu_fc_cpu_distance_fn_t cpu_distance_fn,
- pcpu_fc_alloc_fn_t alloc_fn,
- pcpu_fc_free_fn_t free_fn);
+ pcpu_fc_cpu_to_node_fn_t cpu_to_nd_fn);
extern int __init pcpu_page_first_chunk(size_t reserved_size,
- pcpu_fc_alloc_fn_t alloc_fn,
- pcpu_fc_free_fn_t free_fn,
- pcpu_fc_populate_pte_fn_t populate_pte_fn);
+ pcpu_fc_cpu_to_node_fn_t cpu_to_nd_fn);
The pcpu_fc_alloc_fn_t/pcpu_fc_free_fn_t is killed, we provide generic
pcpu_fc_alloc() and pcpu_fc_free() function, which are called in the
pcpu_embed/page_first_chunk().
1) For pcpu_embed_first_chunk(), pcpu_fc_cpu_to_node_fn_t is needed to be
provided when archs supported NUMA.
2) For pcpu_page_first_chunk(), the pcpu_fc_populate_pte_fn_t is killed too,
a generic pcpu_populate_pte() which marked '__weak' is provided, if you
need a different function to populate pte on the arch(like x86), please
provide its own implementation.
[1] https://github.com/kevin78/linux.git percpu-cleanup
This patch (of 4):
The HAVE_SETUP_PER_CPU_AREA/NEED_PER_CPU_EMBED_FIRST_CHUNK/
NEED_PER_CPU_PAGE_FIRST_CHUNK/USE_PERCPU_NUMA_NODE_ID configs, which have
duplicate definitions on platforms that subscribe it.
Move them into mm, drop these redundant definitions and instead just
select it on applicable platforms.
Link: https://lkml.kernel.org/r/20211216112359.103822-1-wangkefeng.wang@huawei.com
Link: https://lkml.kernel.org/r/20211216112359.103822-2-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com> [arm64]
Cc: Will Deacon <will@kernel.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
arch/riscv/mm/init.c:48:11-16: WARNING: conversion to bool not needed here
Remove unneeded conversion to bool
Semantic patch information:
Relational and logical operators evaluate to bool,
explicit conversion is overly verbose and unneeded.
Generated by: scripts/coccinelle/misc/boolconv.cocci
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: kernel test robot <lkp@intel.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
This patchset allows to have a single kernel for sv39 and sv48 without
being relocatable.
The idea comes from Arnd Bergmann who suggested to do the same as x86,
that is mapping the kernel to the end of the address space, which allows
the kernel to be linked at the same address for both sv39 and sv48 and
then does not require to be relocated at runtime.
This implements sv48 support at runtime. The kernel will try to boot
with 4-level page table and will fallback to 3-level if the HW does not
support it. Folding the 4th level into a 3-level page table has almost
no cost at runtime.
Note that kasan region had to be moved to the end of the address space
since its location must be known at compile-time and then be valid for
both sv39 and sv48 (and sv57 that is coming).
* riscv-sv48-v3:
riscv: Explicit comment about user virtual address space size
riscv: Use pgtable_l4_enabled to output mmu_type in cpuinfo
riscv: Implement sv48 support
asm-generic: Prepare for riscv use of pud_alloc_one and pud_free
riscv: Allow to dynamically define VA_BITS
riscv: Introduce functions to switch pt_ops
riscv: Split early kasan mapping to prepare sv48 introduction
riscv: Move KASAN mapping next to the kernel mapping
riscv: Get rid of MAXPHYSMEM configs
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Define precisely the size of the user accessible virtual space size
for sv32/39/48 mmu types and explain why the whole virtual address
space is split into 2 equal chunks between kernel and user space.
Signed-off-by: Alexandre Ghiti <alexandre.ghiti@canonical.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Now that the mmu type is determined at runtime using SATP
characteristic, use the global variable pgtable_l4_enabled to output
mmu type of the processor through /proc/cpuinfo instead of relying on
device tree infos.
Signed-off-by: Alexandre Ghiti <alexandre.ghiti@canonical.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
By adding a new 4th level of page table, give the possibility to 64bit
kernel to address 2^48 bytes of virtual address: in practice, that offers
128TB of virtual address space to userspace and allows up to 64TB of
physical memory.
If the underlying hardware does not support sv48, we will automatically
fallback to a standard 3-level page table by folding the new PUD level into
PGDIR level. In order to detect HW capabilities at runtime, we
use SATP feature that ignores writes with an unsupported mode.
Signed-off-by: Alexandre Ghiti <alexandre.ghiti@canonical.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
With 4-level page table folding at runtime, we don't know at compile time
the size of the virtual address space so we must set VA_BITS dynamically
so that sparsemem reserves the right amount of memory for struct pages.
Signed-off-by: Alexandre Ghiti <alexandre.ghiti@canonical.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
This simply gathers the different pt_ops initialization in functions
where a comment was added to explain why the page table operations must
be changed along the boot process.
Signed-off-by: Alexandre Ghiti <alexandre.ghiti@canonical.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Now that kasan shadow region is next to the kernel, for sv48, this
region won't be aligned on PGDIR_SIZE and then when populating this
region, we'll need to get down to lower levels of the page table. So
instead of reimplementing the page table walk for the early population,
take advantage of the existing functions used for the final population.
Note that kasan swapper initialization must also be split since memblock
is not initialized at this point and as the last PGD is shared with the
kernel, we'd need to allocate a PUD so postpone the kasan final
population after the kernel population is done.
Signed-off-by: Alexandre Ghiti <alexandre.ghiti@canonical.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Now that KASAN_SHADOW_OFFSET is defined at compile time as a config,
this value must remain constant whatever the size of the virtual address
space, which is only possible by pushing this region at the end of the
address space next to the kernel mapping.
Signed-off-by: Alexandre Ghiti <alexandre.ghiti@canonical.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
CONFIG_MAXPHYSMEM_* are actually never used, even the nommu defconfigs
selecting the MAXPHYSMEM_2GB had no effects on PAGE_OFFSET since it was
preempted by !MMU case right before.
In addition, the move of the kernel mapping at the end of the address
space broke the use of MAXPHYSMEM_2G with MMU since it defines PAGE_OFFSET
at the same address as the kernel mapping.
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Fixes: 2bfc6cd81b ("riscv: Move kernel mapping outside of linear mapping")
Signed-off-by: Alexandre Ghiti <alexandre.ghiti@canonical.com>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: Conor Dooley <Conor.Dooley@microchip.com>
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Currently, the #ifdef CONFIG_XIP_KERNEL usage can be divided into the
following three types:
The first one is for functions/declarations only used in XIP case.
The second one is for XIP_FIXUP case. Something as below:
|foo_type foo;
|#ifdef CONFIG_XIP_KERNEL
|#define foo (*(foo_type *)XIP_FIXUP(&foo))
|#endif
Usually, it's better to let the foo macro sit with the foo var
together. But if various foos are defined adjacently, we can
save some #ifdef CONFIG_XIP_KERNEL usage by grouping them together.
The third one is for different implementations for XIP, usually, this
is a #ifdef...#else...#endif case.
This patch moves the pt_ops macro to adjacent #ifdef CONFIG_XIP_KERNEL
and group first type usage cases into one.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Reviewed-by: Alexandre Ghiti <alex@ghiti.fr>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Try our best to replace the conditional compilation using
"#ifdef CONFIG_XIP_KERNEL" with "IS_ENABLED(CONFIG_XIP_KERNEL)", to
simplify the code and to increase compile coverage.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Reviewed-by: Alexandre Ghiti <alex@ghiti.fr>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Except "pt_ops", other global vars when CONFIG_XIP_KERNEL=y is defined
as below:
|foo_type foo;
|#ifdef CONFIG_XIP_KERNEL
|#define foo (*(foo_type *)XIP_FIXUP(&foo))
|#endif
Follow the same way for pt_ops to unify the style and to simplify code.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Reviewed-by: Alexandre Ghiti <alex@ghiti.fr>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Try our best to replace the conditional compilation using
"#ifdef CONFIG_64BIT" by a check for "IS_ENABLED(CONFIG_64BIT)", to
simplify the code and to increase compile coverage.
Now we can also remove the __maybe_unused used in max_mapped_addr
declaration.
We also remove the BUG_ON check of mapping the last 4K bytes of the
addressable memory since this is always true for every kernel actually.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Reviewed-by: Alexandre Ghiti <alex@ghiti.fr>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
The is_kdump_kernel() returns false for !CRASH_DUMP case, so we don't
need the #ifdef CONFIG_CRASH_DUMP for is_kdump_kernel() checking.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Reviewed-by: Alexandre Ghiti <alex@ghiti.fr>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
* Support for the DA9063 as used on the HiFive Unmatched.
* Support for relative extables, which puts us in line with other
architectures and save some space in vmlinux.
* A handful of kexec fixes/improvements, including the ability to run
crash kernels from PCI-addressable memory on the HiFive Unmatched.
* Support for the SBI SRST extension, which allows systems that do not
have an explicit driver in Linux to reboot.
* A handful of fixes and cleanups, including to the defconfigs and
device trees.
---
This time I do expect to have a part 2, as there's still some smaller
patches on the list. I was hoping to get through more of that over the
weekend, but I got distracted with the ABI issues. Figured it's better
to send this sooner rather than waiting.
Included are my merge resolutions against a master from this morning, if
that helps any:
diff --cc arch/riscv/include/asm/sbi.h
index 289621da4a2a,9c46dd3ff4a2..000000000000
--- a/arch/riscv/include/asm/sbi.h
+++ b/arch/riscv/include/asm/sbi.h
@@@ -27,7 -27,14 +27,15 @@@ enum sbi_ext_id
SBI_EXT_IPI = 0x735049,
SBI_EXT_RFENCE = 0x52464E43,
SBI_EXT_HSM = 0x48534D,
+ SBI_EXT_SRST = 0x53525354,
+
+ /* Experimentals extensions must lie within this range */
+ SBI_EXT_EXPERIMENTAL_START = 0x08000000,
+ SBI_EXT_EXPERIMENTAL_END = 0x08FFFFFF,
+
+ /* Vendor extensions must lie within this range */
+ SBI_EXT_VENDOR_START = 0x09000000,
+ SBI_EXT_VENDOR_END = 0x09FFFFFF,
};
enum sbi_ext_base_fid {
diff --git a/arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dts b/arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dts
index e03a4c94cf3f..6bfa1f24d3de 100644
--- a/arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dts
+++ b/arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dts
@@ -188,14 +188,6 @@ vdd_ldo11: ldo11 {
regulator-always-on;
};
};
-
- rtc {
- compatible = "dlg,da9063-rtc";
- };
-
- wdt {
- compatible = "dlg,da9063-watchdog";
- };
};
};
-----BEGIN PGP SIGNATURE-----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=uqtf
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-5.17-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:
- Support for the DA9063 as used on the HiFive Unmatched.
- Support for relative extables, which puts us in line with other
architectures and save some space in vmlinux.
- A handful of kexec fixes/improvements, including the ability to run
crash kernels from PCI-addressable memory on the HiFive Unmatched.
- Support for the SBI SRST extension, which allows systems that do not
have an explicit driver in Linux to reboot.
- A handful of fixes and cleanups, including to the defconfigs and
device trees.
* tag 'riscv-for-linus-5.17-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (52 commits)
RISC-V: Use SBI SRST extension when available
riscv: mm: fix wrong phys_ram_base value for RV64
RISC-V: Use common riscv_cpuid_to_hartid_mask() for both SMP=y and SMP=n
riscv: head: remove useless __PAGE_ALIGNED_BSS and .balign
riscv: errata: alternative: mark vendor_patch_func __initdata
riscv: head: make secondary_start_common() static
riscv: remove cpu_stop()
riscv: try to allocate crashkern region from 32bit addressible memory
riscv: use hart id instead of cpu id on machine_kexec
riscv: Don't use va_pa_offset on kdump
riscv: dts: sifive: fu540-c000: Fix PLIC node
riscv: dts: sifive: fu540-c000: Drop bogus soc node compatible values
riscv: dts: sifive: Group tuples in register properties
riscv: dts: sifive: Group tuples in interrupt properties
riscv: dts: microchip: mpfs: Group tuples in interrupt properties
riscv: dts: microchip: mpfs: Fix clock controller node
riscv: dts: microchip: mpfs: Fix reference clock node
riscv: dts: microchip: mpfs: Fix PLIC node
riscv: dts: microchip: mpfs: Drop empty chosen node
riscv: dts: canaan: Group tuples in interrupt properties
...
- Add new kconfig target 'make mod2noconfig', which will be useful to
speed up the build and test iteration.
- Raise the minimum supported version of LLVM to 11.0.0
- Refactor certs/Makefile
- Change the format of include/config/auto.conf to stop double-quoting
string type CONFIG options.
- Fix ARCH=sh builds in dash
- Separate compression macros for general purposes (cmd_bzip2 etc.) and
the ones for decompressors (cmd_bzip2_with_size etc.)
- Misc Makefile cleanups
-----BEGIN PGP SIGNATURE-----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=8BQf
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Add new kconfig target 'make mod2noconfig', which will be useful to
speed up the build and test iteration.
- Raise the minimum supported version of LLVM to 11.0.0
- Refactor certs/Makefile
- Change the format of include/config/auto.conf to stop double-quoting
string type CONFIG options.
- Fix ARCH=sh builds in dash
- Separate compression macros for general purposes (cmd_bzip2 etc.) and
the ones for decompressors (cmd_bzip2_with_size etc.)
- Misc Makefile cleanups
* tag 'kbuild-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (34 commits)
kbuild: add cmd_file_size
arch: decompressor: remove useless vmlinux.bin.all-y
kbuild: rename cmd_{bzip2,lzma,lzo,lz4,xzkern,zstd22}
kbuild: drop $(size_append) from cmd_zstd
sh: rename suffix-y to suffix_y
doc: kbuild: fix default in `imply` table
microblaze: use built-in function to get CPU_{MAJOR,MINOR,REV}
certs: move scripts/extract-cert to certs/
kbuild: do not quote string values in include/config/auto.conf
kbuild: do not include include/config/auto.conf from shell scripts
certs: simplify $(srctree)/ handling and remove config_filename macro
kbuild: stop using config_filename in scripts/Makefile.modsign
certs: remove misleading comments about GCC PR
certs: refactor file cleaning
certs: remove unneeded -I$(srctree) option for system_certificates.o
certs: unify duplicated cmd_extract_certs and improve the log
certs: use $< and $@ to simplify the key generation rule
kbuild: remove headers_check stub
kbuild: move headers_check.pl to usr/include/
certs: use if_changed to re-generate the key when the key type is changed
...
Pull signal/exit/ptrace updates from Eric Biederman:
"This set of changes deletes some dead code, makes a lot of cleanups
which hopefully make the code easier to follow, and fixes bugs found
along the way.
The end-game which I have not yet reached yet is for fatal signals
that generate coredumps to be short-circuit deliverable from
complete_signal, for force_siginfo_to_task not to require changing
userspace configured signal delivery state, and for the ptrace stops
to always happen in locations where we can guarantee on all
architectures that the all of the registers are saved and available on
the stack.
Removal of profile_task_ext, profile_munmap, and profile_handoff_task
are the big successes for dead code removal this round.
A bunch of small bug fixes are included, as most of the issues
reported were small enough that they would not affect bisection so I
simply added the fixes and did not fold the fixes into the changes
they were fixing.
There was a bug that broke coredumps piped to systemd-coredump. I
dropped the change that caused that bug and replaced it entirely with
something much more restrained. Unfortunately that required some
rebasing.
Some successes after this set of changes: There are few enough calls
to do_exit to audit in a reasonable amount of time. The lifetime of
struct kthread now matches the lifetime of struct task, and the
pointer to struct kthread is no longer stored in set_child_tid. The
flag SIGNAL_GROUP_COREDUMP is removed. The field group_exit_task is
removed. Issues where task->exit_code was examined with
signal->group_exit_code should been examined were fixed.
There are several loosely related changes included because I am
cleaning up and if I don't include them they will probably get lost.
The original postings of these changes can be found at:
https://lkml.kernel.org/r/87a6ha4zsd.fsf@email.froward.int.ebiederm.orghttps://lkml.kernel.org/r/87bl1kunjj.fsf@email.froward.int.ebiederm.orghttps://lkml.kernel.org/r/87r19opkx1.fsf_-_@email.froward.int.ebiederm.org
I trimmed back the last set of changes to only the obviously correct
once. Simply because there was less time for review than I had hoped"
* 'signal-for-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (44 commits)
ptrace/m68k: Stop open coding ptrace_report_syscall
ptrace: Remove unused regs argument from ptrace_report_syscall
ptrace: Remove second setting of PT_SEIZED in ptrace_attach
taskstats: Cleanup the use of task->exit_code
exit: Use the correct exit_code in /proc/<pid>/stat
exit: Fix the exit_code for wait_task_zombie
exit: Coredumps reach do_group_exit
exit: Remove profile_handoff_task
exit: Remove profile_task_exit & profile_munmap
signal: clean up kernel-doc comments
signal: Remove the helper signal_group_exit
signal: Rename group_exit_task group_exec_task
coredump: Stop setting signal->group_exit_task
signal: Remove SIGNAL_GROUP_COREDUMP
signal: During coredumps set SIGNAL_GROUP_EXIT in zap_process
signal: Make coredump handling explicit in complete_signal
signal: Have prepare_signal detect coredumps using signal->core_state
signal: Have the oom killer detect coredumps using signal->core_state
exit: Move force_uaccess back into do_exit
exit: Guarantee make_task_dead leaks the tsk when calling do_task_exit
...
- Use common KVM implementation of MMU memory caches
- SBI v0.2 support for Guest
- Initial KVM selftests support
- Fix to avoid spurious virtual interrupts after clearing hideleg CSR
- Update email address for Anup and Atish
ARM:
- Simplification of the 'vcpu first run' by integrating it into
KVM's 'pid change' flow
- Refactoring of the FP and SVE state tracking, also leading to
a simpler state and less shared data between EL1 and EL2 in
the nVHE case
- Tidy up the header file usage for the nvhe hyp object
- New HYP unsharing mechanism, finally allowing pages to be
unmapped from the Stage-1 EL2 page-tables
- Various pKVM cleanups around refcounting and sharing
- A couple of vgic fixes for bugs that would trigger once
the vcpu xarray rework is merged, but not sooner
- Add minimal support for ARMv8.7's PMU extension
- Rework kvm_pgtable initialisation ahead of the NV work
- New selftest for IRQ injection
- Teach selftests about the lack of default IPA space and
page sizes
- Expand sysreg selftest to deal with Pointer Authentication
- The usual bunch of cleanups and doc update
s390:
- fix sigp sense/start/stop/inconsistency
- cleanups
x86:
- Clean up some function prototypes more
- improved gfn_to_pfn_cache with proper invalidation, used by Xen emulation
- add KVM_IRQ_ROUTING_XEN_EVTCHN and event channel delivery
- completely remove potential TOC/TOU races in nested SVM consistency checks
- update some PMCs on emulated instructions
- Intel AMX support (joint work between Thomas and Intel)
- large MMU cleanups
- module parameter to disable PMU virtualization
- cleanup register cache
- first part of halt handling cleanups
- Hyper-V enlightened MSR bitmap support for nested hypervisors
Generic:
- clean up Makefiles
- introduce CONFIG_HAVE_KVM_DIRTY_RING
- optimize memslot lookup using a tree
- optimize vCPU array usage by converting to xarray
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmHhxvsUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroPZkAf+Nz92UL/5nNGcdHtE4m7AToMmitE9
bYkesf9BMQvAe5wjkABLuoHGi6ay4jabo4fiGzbdkiK7lO5YgfsWiMB3/MT5fl4E
jRPzaVQabp3YZLM8UYCBmfUVuRj524S967SfSRe0AvYjDEH8y7klPf4+7sCsFT0/
Px9Vf2KGuOlf0eM78yKg4rGaF0jS22eLgXm6FfNMY8/e29ZAo/jyUmqBY+Z2xxZG
aWhceDtSheW1jwLHLj3nOlQJvHTn8LVGXBE/R8Gda3ZjrBV2rKaDi4Fh+HD+dz86
2zVXwzQ7uck2CMW73GMoXMTWoKSHMyvlBOs1BdvBm4UsnGcXR+q8IFCeuQ==
=s73m
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"RISCV:
- Use common KVM implementation of MMU memory caches
- SBI v0.2 support for Guest
- Initial KVM selftests support
- Fix to avoid spurious virtual interrupts after clearing hideleg CSR
- Update email address for Anup and Atish
ARM:
- Simplification of the 'vcpu first run' by integrating it into KVM's
'pid change' flow
- Refactoring of the FP and SVE state tracking, also leading to a
simpler state and less shared data between EL1 and EL2 in the nVHE
case
- Tidy up the header file usage for the nvhe hyp object
- New HYP unsharing mechanism, finally allowing pages to be unmapped
from the Stage-1 EL2 page-tables
- Various pKVM cleanups around refcounting and sharing
- A couple of vgic fixes for bugs that would trigger once the vcpu
xarray rework is merged, but not sooner
- Add minimal support for ARMv8.7's PMU extension
- Rework kvm_pgtable initialisation ahead of the NV work
- New selftest for IRQ injection
- Teach selftests about the lack of default IPA space and page sizes
- Expand sysreg selftest to deal with Pointer Authentication
- The usual bunch of cleanups and doc update
s390:
- fix sigp sense/start/stop/inconsistency
- cleanups
x86:
- Clean up some function prototypes more
- improved gfn_to_pfn_cache with proper invalidation, used by Xen
emulation
- add KVM_IRQ_ROUTING_XEN_EVTCHN and event channel delivery
- completely remove potential TOC/TOU races in nested SVM consistency
checks
- update some PMCs on emulated instructions
- Intel AMX support (joint work between Thomas and Intel)
- large MMU cleanups
- module parameter to disable PMU virtualization
- cleanup register cache
- first part of halt handling cleanups
- Hyper-V enlightened MSR bitmap support for nested hypervisors
Generic:
- clean up Makefiles
- introduce CONFIG_HAVE_KVM_DIRTY_RING
- optimize memslot lookup using a tree
- optimize vCPU array usage by converting to xarray"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (268 commits)
x86/fpu: Fix inline prefix warnings
selftest: kvm: Add amx selftest
selftest: kvm: Move struct kvm_x86_state to header
selftest: kvm: Reorder vcpu_load_state steps for AMX
kvm: x86: Disable interception for IA32_XFD on demand
x86/fpu: Provide fpu_sync_guest_vmexit_xfd_state()
kvm: selftests: Add support for KVM_CAP_XSAVE2
kvm: x86: Add support for getting/setting expanded xstate buffer
x86/fpu: Add uabi_size to guest_fpu
kvm: x86: Add CPUID support for Intel AMX
kvm: x86: Add XCR0 support for Intel AMX
kvm: x86: Disable RDMSR interception of IA32_XFD_ERR
kvm: x86: Emulate IA32_XFD_ERR for guest
kvm: x86: Intercept #NM for saving IA32_XFD_ERR
x86/fpu: Prepare xfd_err in struct fpu_guest
kvm: x86: Add emulation for IA32_XFD
x86/fpu: Provide fpu_update_guest_xfd() for IA32_XFD emulation
kvm: x86: Enable dynamic xfeatures at KVM_SET_CPUID2
x86/fpu: Provide fpu_enable_guest_xfd_features() for KVM
x86/fpu: Add guest support to xfd_enable_feature()
...
Merge misc updates from Andrew Morton:
"146 patches.
Subsystems affected by this patch series: kthread, ia64, scripts,
ntfs, squashfs, ocfs2, vfs, and mm (slab-generic, slab, kmemleak,
dax, kasan, debug, pagecache, gup, shmem, frontswap, memremap,
memcg, selftests, pagemap, dma, vmalloc, memory-failure, hugetlb,
userfaultfd, vmscan, mempolicy, oom-kill, hugetlbfs, migration, thp,
ksm, page-poison, percpu, rmap, zswap, zram, cleanups, hmm, and
damon)"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (146 commits)
mm/damon: hide kernel pointer from tracepoint event
mm/damon/vaddr: hide kernel pointer from damon_va_three_regions() failure log
mm/damon/vaddr: use pr_debug() for damon_va_three_regions() failure logging
mm/damon/dbgfs: remove an unnecessary variable
mm/damon: move the implementation of damon_insert_region to damon.h
mm/damon: add access checking for hugetlb pages
Docs/admin-guide/mm/damon/usage: update for schemes statistics
mm/damon/dbgfs: support all DAMOS stats
Docs/admin-guide/mm/damon/reclaim: document statistics parameters
mm/damon/reclaim: provide reclamation statistics
mm/damon/schemes: account how many times quota limit has exceeded
mm/damon/schemes: account scheme actions that successfully applied
mm/damon: remove a mistakenly added comment for a future feature
Docs/admin-guide/mm/damon/usage: update for kdamond_pid and (mk|rm)_contexts
Docs/admin-guide/mm/damon/usage: mention tracepoint at the beginning
Docs/admin-guide/mm/damon/usage: remove redundant information
Docs/admin-guide/mm/damon/usage: update for scheme quotas and watermarks
mm/damon: convert macro functions to static inline functions
mm/damon: modify damon_rand() macro to static inline function
mm/damon: move damon_rand() definition into damon.h
...
find_bit API and bitmap API are closely related, but inclusion paths
are different - include/asm-generic and include/linux, correspondingly.
In the past it made a lot of troubles due to circular dependencies
and/or undefined symbols. Fix this by moving find.h under include/linux.
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Since commit 4064b98270 ("mm: allow VM_FAULT_RETRY for multiple
times") allowed VM_FAULT_RETRY for multiple times, the
FAULT_FLAG_ALLOW_RETRY bit of fault_flag will not be changed in the page
fault path, so the following check is no longer needed:
flags & FAULT_FLAG_ALLOW_RETRY
So just remove it.
[akpm@linux-foundation.org: coding style fixes]
Link: https://lkml.kernel.org/r/20211110123358.36511-1-zhengqi.arch@bytedance.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Kirill Shutemov <kirill@shutemov.name>
Cc: Peter Xu <peterx@redhat.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
"Cleanup of the perf/kvm interaction."
-----BEGIN PGP SIGNATURE-----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=tU5G
-----END PGP SIGNATURE-----
Merge tag 'perf_core_for_v5.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf updates from Borislav Petkov:
"Cleanup of the perf/kvm interaction."
* tag 'perf_core_for_v5.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf: Drop guest callback (un)register stubs
KVM: arm64: Drop perf.c and fold its tiny bits of code into arm.c
KVM: arm64: Hide kvm_arm_pmu_available behind CONFIG_HW_PERF_EVENTS=y
KVM: arm64: Convert to the generic perf callbacks
KVM: x86: Move Intel Processor Trace interrupt handler to vmx.c
KVM: Move x86's perf guest info callbacks to generic KVM
KVM: x86: More precisely identify NMI from guest when handling PMI
KVM: x86: Drop current_vcpu for kvm_running_vcpu + kvm_arch_vcpu variable
perf/core: Use static_call to optimize perf_guest_info_callbacks
perf: Force architectures to opt-in to guest callbacks
perf: Add wrappers for invoking guest callbacks
perf/core: Rework guest callbacks to prepare for static_call support
perf: Drop dead and useless guest "support" from arm, csky, nds32 and riscv
perf: Stop pretending that perf can handle multiple guest callbacks
KVM: x86: Register Processor Trace interrupt hook iff PT enabled in guest
KVM: x86: Register perf callbacks after calling vendor's hardware_setup()
perf: Protect perf_guest_cbs with RCU
"Lots of cleanups and preparation; highlights:
- futex: Cleanup and remove runtime futex_cmpxchg detection
- rtmutex: Some fixes for the PREEMPT_RT locking infrastructure
- kcsan: Share owner_on_cpu() between mutex,rtmutex and rwsem and
annotate the racy owner->on_cpu access *once*.
- atomic64: Dead-Code-Elemination"
-----BEGIN PGP SIGNATURE-----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=vrYy
-----END PGP SIGNATURE-----
Merge tag 'locking_core_for_v5.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking updates from Borislav Petkov:
"Lots of cleanups and preparation. Highlights:
- futex: Cleanup and remove runtime futex_cmpxchg detection
- rtmutex: Some fixes for the PREEMPT_RT locking infrastructure
- kcsan: Share owner_on_cpu() between mutex,rtmutex and rwsem and
annotate the racy owner->on_cpu access *once*.
- atomic64: Dead-Code-Elemination"
[ Description above by Peter Zijlstra ]
* tag 'locking_core_for_v5.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/atomic: atomic64: Remove unusable atomic ops
futex: Fix additional regressions
locking: Allow to include asm/spinlock_types.h from linux/spinlock_types_raw.h
x86/mm: Include spinlock_t definition in pgtable.
locking: Mark racy reads of owner->on_cpu
locking: Make owner_on_cpu() into <linux/sched.h>
lockdep/selftests: Adapt ww-tests for PREEMPT_RT
lockdep/selftests: Skip the softirq related tests on PREEMPT_RT
lockdep/selftests: Unbalanced migrate_disable() & rcu_read_lock().
lockdep/selftests: Avoid using local_lock_{acquire|release}().
lockdep: Remove softirq accounting on PREEMPT_RT.
locking/rtmutex: Add rt_mutex_lock_nest_lock() and rt_mutex_lock_killable().
locking/rtmutex: Squash self-deadlock check for ww_rt_mutex.
locking: Remove rt_rwlock_is_contended().
sched: Trigger warning if ->migration_disabled counter underflows.
futex: Fix sparc32/m68k/nds32 build regression
futex: Remove futex_cmpxchg detection
futex: Ensure futex_atomic_cmpxchg_inatomic() is present
kernel/locking: Use a pointer in ww_mutex_trylock().
The SBI SRST extension provides a standard way to poweroff and
reboot the system irrespective to whether Linux RISC-V S-mode
is running natively (HS-mode) or inside Guest/VM (VS-mode).
The SBI SRST extension is available in the SBI v0.3 specification.
(Refer, https://github.com/riscv/riscv-sbi-doc/releases/tag/v0.3.0-rc1)
This patch extends Linux RISC-V SBI implementation to detect
and use SBI SRST extension.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Core
----
- Defer freeing TCP skbs to the BH handler, whenever possible,
or at least perform the freeing outside of the socket lock section
to decrease cross-CPU allocator work and improve latency.
- Add netdevice refcount tracking to locate sources of netdevice
and net namespace refcount leaks.
- Make Tx watchdog less intrusive - avoid pausing Tx and restarting
all queues from a single CPU removing latency spikes.
- Various small optimizations throughout the stack from Eric Dumazet.
- Make netdev->dev_addr[] constant, force modifications to go via
appropriate helpers to allow us to keep addresses in ordered data
structures.
- Replace unix_table_lock with per-hash locks, improving performance
of bind() calls.
- Extend skb drop tracepoint with a drop reason.
- Allow SO_MARK and SO_PRIORITY setsockopt under CAP_NET_RAW.
BPF
---
- New helpers:
- bpf_find_vma(), find and inspect VMAs for profiling use cases
- bpf_loop(), runtime-bounded loop helper trading some execution
time for much faster (if at all converging) verification
- bpf_strncmp(), improve performance, avoid compiler flakiness
- bpf_get_func_arg(), bpf_get_func_ret(), bpf_get_func_arg_cnt()
for tracing programs, all inlined by the verifier
- Support BPF relocations (CO-RE) in the kernel loader.
- Further the support for BTF_TYPE_TAG annotations.
- Allow access to local storage in sleepable helpers.
- Convert verifier argument types to a composable form with different
attributes which can be shared across types (ro, maybe-null).
- Prepare libbpf for upcoming v1.0 release by cleaning up APIs,
creating new, extensible ones where missing and deprecating those
to be removed.
Protocols
---------
- WiFi (mac80211/cfg80211):
- notify user space about long "come back in N" AP responses,
allow it to react to such temporary rejections
- allow non-standard VHT MCS 10/11 rates
- use coarse time in airtime fairness code to save CPU cycles
- Bluetooth:
- rework of HCI command execution serialization to use a common
queue and work struct, and improve handling errors reported
in the middle of a batch of commands
- rework HCI event handling to use skb_pull_data, avoiding packet
parsing pitfalls
- support AOSP Bluetooth Quality Report
- SMC:
- support net namespaces, following the RDMA model
- improve connection establishment latency by pre-clearing buffers
- introduce TCP ULP for automatic redirection to SMC
- Multi-Path TCP:
- support ioctls: SIOCINQ, OUTQ, and OUTQNSD
- support socket options: IP_TOS, IP_FREEBIND, IP_TRANSPARENT,
IPV6_FREEBIND, and IPV6_TRANSPARENT, TCP_CORK and TCP_NODELAY
- support cmsgs: TCP_INQ
- improvements in the data scheduler (assigning data to subflows)
- support fastclose option (quick shutdown of the full MPTCP
connection, similar to TCP RST in regular TCP)
- MCTP (Management Component Transport) over serial, as defined by
DMTF spec DSP0253 - "MCTP Serial Transport Binding".
Driver API
----------
- Support timestamping on bond interfaces in active/passive mode.
- Introduce generic phylink link mode validation for drivers which
don't have any quirks and where MAC capability bits fully express
what's supported. Allow PCS layer to participate in the validation.
Convert a number of drivers.
- Add support to set/get size of buffers on the Rx rings and size of
the tx copybreak buffer via ethtool.
- Support offloading TC actions as first-class citizens rather than
only as attributes of filters, improve sharing and device resource
utilization.
- WiFi (mac80211/cfg80211):
- support forwarding offload (ndo_fill_forward_path)
- support for background radar detection hardware
- SA Query Procedures offload on the AP side
New hardware / drivers
----------------------
- tsnep - FPGA based TSN endpoint Ethernet MAC used in PLCs with
real-time requirements for isochronous communication with protocols
like OPC UA Pub/Sub.
- Qualcomm BAM-DMUX WWAN - driver for data channels of modems
integrated into many older Qualcomm SoCs, e.g. MSM8916 or
MSM8974 (qcom_bam_dmux).
- Microchip LAN966x multi-port Gigabit AVB/TSN Ethernet Switch
driver with support for bridging, VLANs and multicast forwarding
(lan966x).
- iwlmei driver for co-operating between Intel's WiFi driver and
Intel's Active Management Technology (AMT) devices.
- mse102x - Vertexcom MSE102x Homeplug GreenPHY chips
- Bluetooth:
- MediaTek MT7921 SDIO devices
- Foxconn MT7922A
- Realtek RTL8852AE
Drivers
-------
- Significantly improve performance in the datapaths of:
lan78xx, ax88179_178a, lantiq_xrx200, bnxt.
- Intel Ethernet NICs:
- igb: support PTP/time PEROUT and EXTTS SDP functions on
82580/i354/i350 adapters
- ixgbevf: new PF -> VF mailbox API which avoids the risk of
mailbox corruption with ESXi
- iavf: support configuration of VLAN features of finer granularity,
stacked tags and filtering
- ice: PTP support for new E822 devices with sub-ns precision
- ice: support firmware activation without reboot
- Mellanox Ethernet NICs (mlx5):
- expose control over IRQ coalescing mode (CQE vs EQE) via ethtool
- support TC forwarding when tunnel encap and decap happen between
two ports of the same NIC
- dynamically size and allow disabling various features to save
resources for running in embedded / SmartNIC scenarios
- Broadcom Ethernet NICs (bnxt):
- use page frag allocator to improve Rx performance
- expose control over IRQ coalescing mode (CQE vs EQE) via ethtool
- Other Ethernet NICs:
- amd-xgbe: add Ryzen 6000 (Yellow Carp) Ethernet support
- Microsoft cloud/virtual NIC (mana):
- add XDP support (PASS, DROP, TX)
- Mellanox Ethernet switches (mlxsw):
- initial support for Spectrum-4 ASICs
- VxLAN with IPv6 underlay
- Marvell Ethernet switches (prestera):
- support flower flow templates
- add basic IP forwarding support
- NXP embedded Ethernet switches (ocelot & felix):
- support Per-Stream Filtering and Policing (PSFP)
- enable cut-through forwarding between ports by default
- support FDMA to improve packet Rx/Tx to CPU
- Other embedded switches:
- hellcreek: improve trapping management (STP and PTP) packets
- qca8k: support link aggregation and port mirroring
- Qualcomm 802.11ax WiFi (ath11k):
- qca6390, wcn6855: enable 802.11 power save mode in station mode
- BSS color change support
- WCN6855 hw2.1 support
- 11d scan offload support
- scan MAC address randomization support
- full monitor mode, only supported on QCN9074
- qca6390/wcn6855: report signal and tx bitrate
- qca6390: rfkill support
- qca6390/wcn6855: regdb.bin support
- Intel WiFi (iwlwifi):
- support SAR GEO Offset Mapping (SGOM) and Time-Aware-SAR (TAS)
in cooperation with the BIOS
- support for Optimized Connectivity Experience (OCE) scan
- support firmware API version 68
- lots of preparatory work for the upcoming Bz device family
- MediaTek WiFi (mt76):
- Specific Absorption Rate (SAR) support
- mt7921: 160 MHz channel support
- RealTek WiFi (rtw88):
- Specific Absorption Rate (SAR) support
- scan offload
- Other WiFi NICs
- ath10k: support fetching (pre-)calibration data from nvmem
- brcmfmac: configure keep-alive packet on suspend
- wcn36xx: beacon filter support
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=KLm3
-----END PGP SIGNATURE-----
Merge tag '5.17-net-next' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core
----
- Defer freeing TCP skbs to the BH handler, whenever possible, or at
least perform the freeing outside of the socket lock section to
decrease cross-CPU allocator work and improve latency.
- Add netdevice refcount tracking to locate sources of netdevice and
net namespace refcount leaks.
- Make Tx watchdog less intrusive - avoid pausing Tx and restarting
all queues from a single CPU removing latency spikes.
- Various small optimizations throughout the stack from Eric Dumazet.
- Make netdev->dev_addr[] constant, force modifications to go via
appropriate helpers to allow us to keep addresses in ordered data
structures.
- Replace unix_table_lock with per-hash locks, improving performance
of bind() calls.
- Extend skb drop tracepoint with a drop reason.
- Allow SO_MARK and SO_PRIORITY setsockopt under CAP_NET_RAW.
BPF
---
- New helpers:
- bpf_find_vma(), find and inspect VMAs for profiling use cases
- bpf_loop(), runtime-bounded loop helper trading some execution
time for much faster (if at all converging) verification
- bpf_strncmp(), improve performance, avoid compiler flakiness
- bpf_get_func_arg(), bpf_get_func_ret(), bpf_get_func_arg_cnt()
for tracing programs, all inlined by the verifier
- Support BPF relocations (CO-RE) in the kernel loader.
- Further the support for BTF_TYPE_TAG annotations.
- Allow access to local storage in sleepable helpers.
- Convert verifier argument types to a composable form with different
attributes which can be shared across types (ro, maybe-null).
- Prepare libbpf for upcoming v1.0 release by cleaning up APIs,
creating new, extensible ones where missing and deprecating those
to be removed.
Protocols
---------
- WiFi (mac80211/cfg80211):
- notify user space about long "come back in N" AP responses,
allow it to react to such temporary rejections
- allow non-standard VHT MCS 10/11 rates
- use coarse time in airtime fairness code to save CPU cycles
- Bluetooth:
- rework of HCI command execution serialization to use a common
queue and work struct, and improve handling errors reported in
the middle of a batch of commands
- rework HCI event handling to use skb_pull_data, avoiding packet
parsing pitfalls
- support AOSP Bluetooth Quality Report
- SMC:
- support net namespaces, following the RDMA model
- improve connection establishment latency by pre-clearing buffers
- introduce TCP ULP for automatic redirection to SMC
- Multi-Path TCP:
- support ioctls: SIOCINQ, OUTQ, and OUTQNSD
- support socket options: IP_TOS, IP_FREEBIND, IP_TRANSPARENT,
IPV6_FREEBIND, and IPV6_TRANSPARENT, TCP_CORK and TCP_NODELAY
- support cmsgs: TCP_INQ
- improvements in the data scheduler (assigning data to subflows)
- support fastclose option (quick shutdown of the full MPTCP
connection, similar to TCP RST in regular TCP)
- MCTP (Management Component Transport) over serial, as defined by
DMTF spec DSP0253 - "MCTP Serial Transport Binding".
Driver API
----------
- Support timestamping on bond interfaces in active/passive mode.
- Introduce generic phylink link mode validation for drivers which
don't have any quirks and where MAC capability bits fully express
what's supported. Allow PCS layer to participate in the validation.
Convert a number of drivers.
- Add support to set/get size of buffers on the Rx rings and size of
the tx copybreak buffer via ethtool.
- Support offloading TC actions as first-class citizens rather than
only as attributes of filters, improve sharing and device resource
utilization.
- WiFi (mac80211/cfg80211):
- support forwarding offload (ndo_fill_forward_path)
- support for background radar detection hardware
- SA Query Procedures offload on the AP side
New hardware / drivers
----------------------
- tsnep - FPGA based TSN endpoint Ethernet MAC used in PLCs with
real-time requirements for isochronous communication with protocols
like OPC UA Pub/Sub.
- Qualcomm BAM-DMUX WWAN - driver for data channels of modems
integrated into many older Qualcomm SoCs, e.g. MSM8916 or MSM8974
(qcom_bam_dmux).
- Microchip LAN966x multi-port Gigabit AVB/TSN Ethernet Switch driver
with support for bridging, VLANs and multicast forwarding
(lan966x).
- iwlmei driver for co-operating between Intel's WiFi driver and
Intel's Active Management Technology (AMT) devices.
- mse102x - Vertexcom MSE102x Homeplug GreenPHY chips
- Bluetooth:
- MediaTek MT7921 SDIO devices
- Foxconn MT7922A
- Realtek RTL8852AE
Drivers
-------
- Significantly improve performance in the datapaths of: lan78xx,
ax88179_178a, lantiq_xrx200, bnxt.
- Intel Ethernet NICs:
- igb: support PTP/time PEROUT and EXTTS SDP functions on
82580/i354/i350 adapters
- ixgbevf: new PF -> VF mailbox API which avoids the risk of
mailbox corruption with ESXi
- iavf: support configuration of VLAN features of finer
granularity, stacked tags and filtering
- ice: PTP support for new E822 devices with sub-ns precision
- ice: support firmware activation without reboot
- Mellanox Ethernet NICs (mlx5):
- expose control over IRQ coalescing mode (CQE vs EQE) via ethtool
- support TC forwarding when tunnel encap and decap happen between
two ports of the same NIC
- dynamically size and allow disabling various features to save
resources for running in embedded / SmartNIC scenarios
- Broadcom Ethernet NICs (bnxt):
- use page frag allocator to improve Rx performance
- expose control over IRQ coalescing mode (CQE vs EQE) via ethtool
- Other Ethernet NICs:
- amd-xgbe: add Ryzen 6000 (Yellow Carp) Ethernet support
- Microsoft cloud/virtual NIC (mana):
- add XDP support (PASS, DROP, TX)
- Mellanox Ethernet switches (mlxsw):
- initial support for Spectrum-4 ASICs
- VxLAN with IPv6 underlay
- Marvell Ethernet switches (prestera):
- support flower flow templates
- add basic IP forwarding support
- NXP embedded Ethernet switches (ocelot & felix):
- support Per-Stream Filtering and Policing (PSFP)
- enable cut-through forwarding between ports by default
- support FDMA to improve packet Rx/Tx to CPU
- Other embedded switches:
- hellcreek: improve trapping management (STP and PTP) packets
- qca8k: support link aggregation and port mirroring
- Qualcomm 802.11ax WiFi (ath11k):
- qca6390, wcn6855: enable 802.11 power save mode in station mode
- BSS color change support
- WCN6855 hw2.1 support
- 11d scan offload support
- scan MAC address randomization support
- full monitor mode, only supported on QCN9074
- qca6390/wcn6855: report signal and tx bitrate
- qca6390: rfkill support
- qca6390/wcn6855: regdb.bin support
- Intel WiFi (iwlwifi):
- support SAR GEO Offset Mapping (SGOM) and Time-Aware-SAR (TAS)
in cooperation with the BIOS
- support for Optimized Connectivity Experience (OCE) scan
- support firmware API version 68
- lots of preparatory work for the upcoming Bz device family
- MediaTek WiFi (mt76):
- Specific Absorption Rate (SAR) support
- mt7921: 160 MHz channel support
- RealTek WiFi (rtw88):
- Specific Absorption Rate (SAR) support
- scan offload
- Other WiFi NICs
- ath10k: support fetching (pre-)calibration data from nvmem
- brcmfmac: configure keep-alive packet on suspend
- wcn36xx: beacon filter support"
* tag '5.17-net-next' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2048 commits)
tcp: tcp_send_challenge_ack delete useless param `skb`
net/qla3xxx: Remove useless DMA-32 fallback configuration
rocker: Remove useless DMA-32 fallback configuration
hinic: Remove useless DMA-32 fallback configuration
lan743x: Remove useless DMA-32 fallback configuration
net: enetc: Remove useless DMA-32 fallback configuration
cxgb4vf: Remove useless DMA-32 fallback configuration
cxgb4: Remove useless DMA-32 fallback configuration
cxgb3: Remove useless DMA-32 fallback configuration
bnx2x: Remove useless DMA-32 fallback configuration
et131x: Remove useless DMA-32 fallback configuration
be2net: Remove useless DMA-32 fallback configuration
vmxnet3: Remove useless DMA-32 fallback configuration
bna: Simplify DMA setting
net: alteon: Simplify DMA setting
myri10ge: Simplify DMA setting
qlcnic: Simplify DMA setting
net: allwinner: Fix print format
page_pool: remove spinlock in page_pool_refill_alloc_cache()
amt: fix wrong return type of amt_send_membership_update()
...
