Instead of just waiting and hoping, actually poll for the pll lock to be
acquired. As a bonus, this should be significantly faster than the
sleep.
Changes in v3:
- Added to the set
Cc: Sandeep Panda <spanda@codeaurora.org>
Reviewed-by: Sandeep Panda <spanda@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180813213058.184821-6-sean@poorly.run
prepare() is the old-timey way to say pre_enable(). It should be called
before modeset. This fixes an issue where the panel on cheza must have
the regulator always-on/boot-on for it to work.
Changes in v3:
- Added to the set
Cc: Sandeep Panda <spanda@codeaurora.org>
Reviewed-by: Sandeep Panda <spanda@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180813213058.184821-5-sean@poorly.run
This was hand-rolled in the first version, and will surely be useful as
we expand the driver to support more varied use cases.
Changes in v2:
- Change subject prefix s/panel/bridge/
- Downgrade warning in poll function to error message
- Fix DP_EDP_CONFIGURATION_SET write value (Sandeep)
- Mask upper 8 bits of msg->address (Sandeep)
- Check aux cmd status for errors after completing the send (Sandeep)
- Remove length check since it's covered in the aux status
- Flip the READ check in transfer to WRITE check + early exit
Changes in v3:
- Added to the set
- Wrapped (x) in WDATA/RDATA #defines
- Replace readx_poll* with regmap_read_poll*
Cc: Sandeep Panda <spanda@codeaurora.org>
Reviewed-by: Sandeep Panda <spanda@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180813213058.184821-4-sean@poorly.run
Order registers by offset and rename bits & masks to match the
datasheet. This makes the driver a bit easier to grok and
cross-reference with the datasheet.
Changes in v3:
- Added to the set
Cc: Sandeep Panda <spanda@codeaurora.org>
Reviewed-by: Sandeep Panda <spanda@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180813213058.184821-3-sean@poorly.run
This patch implements get_crc_sources callback, which returns list of
all the crc sources supported by driver in current platform.
Changes Since V1:
- move sources list per-crtc
- init sources-list only for gen3
Changes Since V2:
- Adopt to driver style
- Address other review comments from Laurent Pinchart
Changes Since V3/4/5: (Laurent Pinchart review)
- s/rcar_du_crtc_crc_sources_list_init/rcar_du_crtc_crc_init
- s/rcar_du_crtc_crc_sources_list_uninit/rcar_du_crtc_crc_cleanup
- other cleanup
Signed-off-by: Mahesh Kumar <mahesh1.kumar@intel.com>
Cc: dri-devel@lists.freedesktop.org
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180808152630.6563-1-mahesh1.kumar@intel.com
This patch implements get_crc_sources callback, which returns list of
all the valid crc sources supported by driver in current platform.
Changes since V1:
- Return array of crc sources
Signed-off-by: Mahesh Kumar <mahesh1.kumar@intel.com>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180713135942.25061-8-mahesh1.kumar@intel.com
This patch introduce a callback function "get_crc_sources" which
will be called during read of control node. It is an optional
callback function and if driver implements this callback, driver
should return a constant pointer to an array of crc sources list
and update count according to the number of source in the list.
Changes Since V1: (Daniel)
- return const pointer to an array of crc sources list
- do validation of sources in CRC-core
Changes Since V2:
- update commit message
- update callback documentation
- print one source name per line
Signed-off-by: Mahesh Kumar <mahesh1.kumar@intel.com>
Cc: dri-devel@lists.freedesktop.org
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180713135942.25061-3-mahesh1.kumar@intel.com
This patch adds a new callback function "verify_crc_source" which will
be used during setting the crc source in control node. This will help
in avoiding setting of wrong string for source.
Changes since V1:
- do not yet verify_crc_source during open.
Changes since V1:
- improve callback description
Signed-off-by: Mahesh Kumar <mahesh1.kumar@intel.com>
Cc: dri-devel@lists.freedesktop.org
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180713135942.25061-2-mahesh1.kumar@intel.com
This patch unifies the naming of DRM functions for reference counting
of struct drm_device. The resulting code is more aligned with the rest
of the Linux kernel interfaces.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: http://patchwork.freedesktop.org/patch/msgid/20180716074940.8691-1-tzimmermann@suse.de
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
If qxl_alloc_client_monitors_config() fails to allocate
client_monitors_config then NULL pointer dereference occurs
in function qxl_display_copy_rom_client_monitors_config() after
qxl_alloc_client_monitors_config() call.
The patch adds return error from qxl_alloc_client_monitors_config()
and additional status for qxl_display_copy_rom_client_monitors_config
return value.
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Anton Vasilyev <vasilyev@ispras.ru>
Link: http://patchwork.freedesktop.org/patch/msgid/20180727153058.23620-1-vasilyev@ispras.ru
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
If qxl_device_init fails on creating resources and does not report it,
then qxl module will catch null pointer exception on remove, or on
probe's error path.
The patch adds error path with resources release into qxl_device_init.
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Anton Vasilyev <vasilyev@ispras.ru>
Link: http://patchwork.freedesktop.org/patch/msgid/20180727115440.11112-1-vasilyev@ispras.ru
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This patch unifies the naming of DRM functions for reference counting
of struct drm_device. The resulting code is more aligned with the rest
of the Linux kernel interfaces.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: http://patchwork.freedesktop.org/patch/msgid/20180713120318.32195-1-tzimmermann@suse.de
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The problem with 24bpp is that it is a rather unusual depth these days,
cirrus is pretty much the only relevant device still using that, and it
is a endless source of issues. Wayland doesn't support it at all. Bugs
in Xorg keep showing up.
Typically either 32bpp or 16bpp are used. Using 32bpp would limit the
resolution to 800x600 due to hardware constrains. So lets go with 16bpp.
Also use the default depth for the framebuffer console and
mode_info->preferred_depth.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20180808111311.30311-1-kraxel@redhat.com
In the Cirrus driver, the regular clean-up code also performs the clean-up
of a failed initialization. If the fbdev's framebuffer was not initialized,
the clean-up will fail within drm_framebuffer_unregister_private. Booting
with cirrus.bpp=16 triggers this bug.
The framebuffer is currently stored directly within struct cirrus_fbdev. To
fix the bug, we turn it into a pointer that is only set for initialized
framebuffers. The fbdev's clean-up code skips uninitialized framebuffers.
The memory for struct drm_framebuffer is allocated dynamically. This requires
additional error handling within cirrusfb_create. The framebuffer clean-up is
now performed by drm_framebuffer_put, which also frees the data strcuture's
memory.
Link: https://bugzilla.suse.com/show_bug.cgi?id=1101822
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: http://patchwork.freedesktop.org/patch/msgid/20180720112743.27159-1-tzimmermann@suse.de
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Since commit 9ea0dfbf972 ("dma-buf: make map_atomic and map function
pointers optional"), the core provides the no-op functions when map and
map_atomic are not provided, so we no longer need assert that are
supplied by a dma-buf exporter.
Fixes: 09ea0dfbf9 ("dma-buf: make map_atomic and map function pointers optional")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20180807183647.22626-1-chris@chris-wilson.co.uk
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This patch unifies the naming of DRM functions for reference counting
of struct drm_device. The resulting code is more aligned with the rest
of the Linux kernel interfaces.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180716074624.7931-1-tzimmermann@suse.de
A new helper function(__drm_atomic_helper_plane_reset) has been added
for linking a plane with its state and resetting the core
properties(alpha, rotation, etc.) to their default values.
Use that instead of duplicating the logic.
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Reviewed-by: Deepak Rawat <drawat@vmware.com>
Signed-off-by: Alexandru Gheorghe <alexandru-cosmin.gheorghe@arm.com>
Acked-by: Sinclair Yeh <syeh@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180804161530.12275-11-alexandru-cosmin.gheorghe@arm.com
A new helper function(__drm_atomic_helper_plane_reset) has been added
for linking a plane with its state and resetting the core
properties(alpha, rotation, etc.) to their default values.
Use that instead of duplicating the logic.
__drm_atomic_helper_plane_reset initializes the alpha property to its
max value, which is defined by the drm core as DRM_BLEND_ALPHA_OPAQUE,
so nothing changes regarding the alpha value.
Signed-off-by: Alexandru Gheorghe <alexandru-cosmin.gheorghe@arm.com>
Acked-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20180804161530.12275-10-alexandru-cosmin.gheorghe@arm.com
As a driver write it is not entirely obvious that a reference to
the event e mentioned in the doc can be obtained via
drm_crtc_vblank_get(). Clarify how to obtain the reference.
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180807201143.7446-1-stefan@agner.ch
Move vmap_count out of the conditional statement since it needs
to be updated for every successful call to vkms_gem_vmap.
Signed-off-by: Haneen Mohammed <hamohammed.sa@gmail.com>
Fixes: bb112b14af ("drm/vkms: Add functions to map/unmap GEM backing storage")
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180801090807.GA4611@haneenDRM
This patch unifies the naming of DRM functions for reference counting
of struct drm_device. The resulting code is more aligned with the rest
of the Linux kernel interfaces.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180713134601.14391-1-tzimmermann@suse.de
Removing the drm_bridge_remove call should avoid a NULL dereference
during list processing in drm_bridge_remove if the error path is ever
taken.
The more natural approach would perhaps be to add a drm_bridge_add,
but there are several other bridges that never call drm_bridge_add.
Just removing the drm_bridge_remove is the easier fix.
Fixes: 84601dbdea ("drm: sti: rework init sequence")
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180806061910.29914-2-peda@axentia.se
A new helper function(__drm_atomic_helper_plane_reset) has been added
for linking a plane with its state and resetting the core
properties(alpha, rotation, etc.) to their default values.
Use that instead of duplicating the logic.
__drm_atomic_helper_plane_reset initializes the alpha property to its
max value, which is defined by the drm core as DRM_BLEND_ALPHA_OPAQUE,
so nothing changes regarding the alpha value.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Alexandru Gheorghe <alexandru-cosmin.gheorghe@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180804161530.12275-8-alexandru-cosmin.gheorghe@arm.com
A new helper function(__drm_atomic_helper_plane_reset) has been added
for linking a plane with its state and resetting the core
properties(alpha, rotation, etc.) to their default values.
Use that instead of duplicating the logic.
__drm_atomic_helper_plane_reset initializes the alpha property to its
max value, which is defined by the drm core as DRM_BLEND_ALPHA_OPAQUE,
so nothing changes regarding the alpha value.
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Alexandru Gheorghe <alexandru-cosmin.gheorghe@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180804161530.12275-9-alexandru-cosmin.gheorghe@arm.com
A new helper function(__drm_atomic_helper_plane_reset) has been added
for linking a plane with its state and resetting the core
properties(alpha, rotation, etc.) to their default values.
Use that instead of duplicating the logic.
Signed-off-by: Alexandru Gheorghe <alexandru-cosmin.gheorghe@arm.com>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20180804161530.12275-7-alexandru-cosmin.gheorghe@arm.com
A new helper function(__drm_atomic_helper_plane_reset) has been added
for linking a plane with its state and resetting the core
properties(alpha, rotation, etc.) to their default values.
Use that instead of duplicating the logic.
__drm_atomic_helper_plane_reset initializes the alpha property to its
max value, which is defined by the drm core as DRM_BLEND_ALPHA_OPAQUE,
so nothing changes regarding the alpha value.
Acked-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Alexandru Gheorghe <alexandru-cosmin.gheorghe@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180804161530.12275-5-alexandru-cosmin.gheorghe@arm.com
A new helper function(__drm_atomic_helper_plane_reset) has been added
for linking a plane with its state and resetting the core
properties(alpha, rotation, etc.) to their default values.
Use that instead of duplicating the logic.
Reviewed-by: Ayan Kumar halder <ayan.halder@arm.com>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Alexandru Gheorghe <alexandru-cosmin.gheorghe@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180804161530.12275-4-alexandru-cosmin.gheorghe@arm.com
There are a lot of drivers that subclass drm_plane_state, all of them
duplicate the code that links together the plane with plane_state.
On top of that, drivers that enable core properties also have to
duplicate the code for initializing the properties to their default
values, which in all cases are the same as the defaults from core.
Change since v1:
- Make it consistent with the other helpers and require that both
plane and state not be NULL, suggested by Boris Brezillon and
Philipp Zabel.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Alexandru Gheorghe <alexandru-cosmin.gheorghe@arm.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20180804161530.12275-2-alexandru-cosmin.gheorghe@arm.com
This patch implement the necessary functions to compute and add CRCs
entries:
- Implement the set_crc_source() callback.
- Compute CRC using crc32 on the visible part of the framebuffer.
- Use ordered workqueue per output to compute and add CRC at the end
of a vblank.
- Use appropriate synchronization methods since the CRC computation must
be atomic wrt the generated vblank event for a given atomic update, by
using spinlock across atomic_begin/atomic_flush to wrap the event
handling code completely and match the flip event with the CRC.
Since vkms_crc_work_handle() can sleep, spinlock can't be acquired
while accessing vkms_output->primary_crc to compute CRC.
To make sure the data is updated and released without conflict with
the vkms_crc_work_handle(), the work_struct is flushed @crtc_destroy
and the data is updated before scheduling the work handle again, as
follow:
* CRC data update:
1- store vkms_crc_data {fb, src} per plane_state
2- @plane_duplicate_state -> allocate vkms_crc_data
3- during atomic commit (@atomic_update) ->
a) copy {fb, src} to plane_state->crc_data
b) get reference to fb,
3- @plane_destroy_state -> a) if (fb refcount) remove reference to fb
b) deallocate crc_data
* Atomic Commit:
1- vkms_plane_atomic_check
2- vkms_prepare_fb -> vmap vkms_gem_obj->vaddr
3- atomic_begin -> hold crc spinlock
4- atomic_plane_update -> a) update vkms_output->primary_crc
b) get reference to fb
5- atomic_flush -> a) send vblank event while holding event_lock
b) release crc spinlock
* hrtimer regular callback:
1- hold crc spinlock
2- drm_crtc_handle_vblank()
3- queue vkms_crc_work_handle
4- release crc spinlock
* cleanup:
1- @cleanup_fb ->vunmap vkms_gem_obj->vaddr
2- @crtc_destroy -> flush work struct
3- @plane_destroy -> a) if (fb refcount) remove reference to fb
b) deallocate crc_data
Signed-off-by: Haneen Mohammed <hamohammed.sa@gmail.com>
[seanpaul fixed typo in vkms_crtc s/vblamk/vblank/]
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/b948327f48c3e70ab232b4a0848ee6d033b26484.1533171495.git.hamohammed.sa@gmail.com
PX30 have vop big and vop lite, just like rk3036 and rk3126
the max input and output resolution is 1920x1080, the main
difference between the two vop is:
vop big:
win0 support yuv and rgb format;
win1 and win2 support rgb format;
vop lit:
win1 support rgb format;
Signed-off-by: Sandy Huang <hjc@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/1530003215-46593-3-git-send-email-hjc@rock-chips.com
"(an unmatched left parenthesis
creates an unresolved tension
that will stay with you all day."
-- Randall Munroe
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180727203331.27778-1-paulo.r.zanoni@intel.com
convert drm_atomic_helper_suspend/resume() to use
drm_mode_config_helper_suspend/resume().
With this conversion, rockchip_drm_fb_resume() and
rockchip_drm_fb_suspend() will not be used anymore.
Both of these functions can be removed.
Also, in struct rockchip_drm_private state will not be
used anymore. So this can be removed forever.
Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Co-Developed-by: Ajit Negi <ajitn.linux@gmail.com>
[changed to Co-Developed-by, according to process/submitting-patches.rst]
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20180731203430.GA30136@jordon-HP-15-Notebook-PC
This function name was changed to drm_connector_attach_encoder().
Unfortunately this driver was posted on the list before that change, and
applied after
Fixes: a095f15c00 ("drm/bridge: add support for sn65dsi86 bridge
driver")
Cc: Sandeep Panda <spanda@codeaurora.org>
Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Archit Taneja <architt@codeaurora.org>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Reviewed-by: Sandeep Panda <spanda@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180730174225.257255-1-seanpaul@chromium.org
Recently drm_mode_connector_attach_encoder changed it's name. The change
was not noticed by bridge author, as a result gcc reports compile error
on next branch.
Fixes: f38b7cca6d ("drm/bridge: tc358764: Add DSI to LVDS bridge driver")
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180727094859.27727-1-a.hajda@samsung.com
