Switch driver over from wext to cfg80211 interface.
Some Notes:
- This patch moves the driver wholesale from wext to cfg80211. Wext
support is still provided through the cfg80211 provided wext
compatability layer.
- Currently only infrastructure mode is implemented. Ad hoc mode is not
yet implemented, but can be added.
- It does not support connecting to a specified bssid, instead roaming
is handled by the card itself. This matches the behaviour of the
existing driver.
- It has been tested using NetworkManager (via wpa_supplicant)
configured to use the wext compatability layer, and then again with the
native nl80211 layer.
Signed-off-by: Karl Relton <karllinuxtest.relton@ntlworld.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Current linux kernel has GENERIC_HDLC_VERSION equal to 4, no need to
have dead code in-kernel which was there for ancient kernel versions.
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Remove all code which is dead for in-kernel driver due to being
ifdefed by LINUX_VERSION_CODE.
While at it, also remove surrounding code which is commented out,
or '#if 1' nops.
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Remove all code which is dead for in-kernel driver due to being
ifdefed by LINUX_VERSION_CODE.
While at it, also remove surrounding code which is commented out,
or '#if 1' nops.
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The current code creates directories in procfs named after interfaces,
but doesn't handle renaming. This can result in name collisions and
consequent WARNINGs. It also means that the interface name cannot
reliably be used to remove the directory - in fact the current code
doesn't even try, and always uses "wlan0"!
Since the name of a proc_dir_entry is embedded in it, use that when
removing it.
Add a netdev notifier to catch interface renaming, and remove and
re-add the directory at this point.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Currently various resources may be leaked in case of an error.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Use memdup_user when user data is immediately copied into the
allocated region.
The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)
// <smpl>
@@
expression from,to,size,flag;
position p;
identifier l1,l2;
@@
- to = \(kmalloc@p\|kzalloc@p\)(size,flag);
+ to = memdup_user(from,size);
if (
- to==NULL
+ IS_ERR(to)
|| ...) {
<+... when != goto l1;
- -ENOMEM
+ PTR_ERR(to)
...+>
}
- if (copy_from_user(to, from, size) != 0) {
- <+... when != goto l2;
- -EFAULT
- ...+>
- }
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Add a spin_unlock and mutex_unlock missing on the error path.
The semantic match that finds this problem is as follows:
(http://coccinelle.lip6.fr/)
// <smpl>
@@
expression E1;
@@
* spin_lock(E1,...);
<+... when != E1
if (...) {
... when != E1
* return ...;
}
...+>
* spin_unlock(E1,...);
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Martyn Welch <martyn.welch@ge.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
1. move adis16400_spi_read_burst() to adis16400_ring.c since it is only
called there
2. add the lost calling to adis16400_self_test()
3. codes cleanup
Signed-off-by: Barry Song <21cnbao@gmail.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
1. add delay between spi transfers
2. move burst read to ring function
3. clean-up
Signed-off-by: Barry Song <21cnbao@gmail.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The sysfs attribute call backs take a file pointer these days. This was
added in 2c3c8bea60 "sysfs: add struct file* to bin_attr callbacks"
Signed-off-by: Dan Carpenter <error27@gmail.com>
Cc: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
These drivers use kzalloc() but don't include slab.h. They currently
build though because the spi.h header will pull in slab.h for us. But
rather than rely on that behavior forever, include slab.h explicitly.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
A bunch of IIO files contain spurious semicolons after function
definitions and case statements and if statements. Guess people
really like this thing, but kill them anyways so they'll stop
spreading via copy & paste with new drivers.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Standardize the spacing/style across the IIO build files:
- comment block in Kconfigs
- newlines at ends of files
- trailing lines at ends of files
- indent with one tab, not spaces or mixed
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Related changes:
- Included example to show usage as generic
(non-swap) disk with ext4 filesystem.
- Renamed rzscontrol to zramconfig to match
with new device naming.
Signed-off-by: Nitin Gupta <ngupta@vflare.org>
Acked-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Related changes:
- Modify revelant Kconfig and Makefile accordingly.
- Change include filenames in code.
- Remove dependency on CONFIG_SWAP in Kconfig as zram usage
is no longer limited to swap disks.
Signed-off-by: Nitin Gupta <ngupta@vflare.org>
Acked-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Currently, ramzwap devices (/dev/ramzswapX) can only
be used as swap disks since it was hard-coded to consider
only the first request in bio vector.
Now, we iterate over all the segments in an incoming
bio which allows us to handle all kinds of I/O requests.
ramzswap devices can still handle PAGE_SIZE aligned and
multiple of PAGE_SIZE sized I/O requests only. To ensure
that we get always get such requests only, we set following
request_queue attributes to PAGE_SIZE:
- physical_block_size
- logical_block_size
- io_min
- io_opt
Note: physical and logical block sizes were already set
equal to PAGE_SIZE and that seems to be sufficient to get
PAGE_SIZE aligned I/O.
Since we are no longer limited to handling swap requests
only, the next few patches rename ramzswap to zram. So,
the devices will then be called /dev/zram{0, 1, 2, ...}
Usage/Examples:
1) Use as /tmp storage
- mkfs.ext4 /dev/zram0
- mount /dev/zram0 /tmp
2) Use as swap:
- mkswap /dev/zram0
- swapon /dev/zram0 -p 10 # give highest priority to zram0
Performance:
- I/O benchamark done with 'dd' command. Details can be
found here:
http://code.google.com/p/compcache/wiki/zramperf
Summary:
- Maximum read speed (approx):
- ram disk: 1200 MB/sec
- zram disk: 600 MB/sec
- Maximum write speed (approx):
- ram disk: 500 MB/sec
- zram disk: 160 MB/sec
Issues:
- Double caching: We can potentially waste memory by having
two copies of a page -- one in page cache (uncompress) and
second in the device memory (compressed). However, during
reclaim, clean page cache pages are quickly freed, so this
does not seem to be a big problem.
- Stale data: Not all filesystems support issuing 'discard'
requests to underlying block devices. So, if such filesystems
are used over zram devices, we can accumulate lot of stale
data in memory. Even for filesystems to do support discard
(example, ext4), we need to see how effective it is.
- Scalability: There is only one (per-device) de/compression
buffer stats. This can lead to significant contention, especially
when used for generic (non-swap) purposes.
Signed-off-by: Nitin Gupta <ngupta@vflare.org>
Acked-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Older mechanism of counting the number of protocols
registered with ST was slow, in-efficient.
It used to check the protocol data for NULL for each
registration/unregistration.
With this change, counting protocols in maintained by
a single counter protos_registered.
Counting protocols is not just for debug purposes
Signed-off-by: Naveen Jain <naveen_jain@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Add version information to be available under the sysfs group
for kim.
Signed-off-by: Naveen Jain <naveen_jain@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Remove the older way of communicating with user-space
daemon UIM.
The older way involved creating of a new kobj and pid
sysfs file under it, and sending signal using that pid.
Now we communicate via rfkill to user-space UIM.
Background: UIM is the user-space daemon which upon
notification from ldisc driver, opens the tty, sets
default baud and then installs (tiocsetd) the ldisc.
Signed-off-by: Naveen Jain <naveen_jain@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Update the TODO of TI-ST to make sure it reflects current list
of activities that need to be done.
Also point it out to the user-space app code relevant to it.
Signed-off-by: Pavan Savoy <pavan_savoy@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Rename driver struct and callbacks to vt6655_* instead of device_* and add
__devinit/__devexit directives.
Signed-off-by: Charles Clément <caratorn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is a patch to the 80211mgr.c file that fixes up warnings
found by the checkpatch.pl tool
Signed-off-by: Timofey Trofimov <tumoxep@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Fix this build error:
drivers/staging/vt6656/built-in.o: In function `rotr1':
(.text+0x1a878): multiple definition of `rotr1'
drivers/staging/rt2870/built-in.o:(.text+0x106c2): first defined here
drivers/staging/vt6656/built-in.o: In function `tkip_sbox':
(.text+0x1a848): multiple definition of `tkip_sbox'
drivers/staging/rt2870/built-in.o:(.text+0x10697): first defined here
drivers/staging/vt6656/built-in.o: In function `xor_32':
(.text+0x1ec24): multiple definition of `xor_32'
drivers/staging/rt2870/built-in.o:(.text+0x111c4): first defined here
drivers/staging/vt6656/built-in.o: In function `xor_128':
(.text+0x1ec00): multiple definition of `xor_128'
drivers/staging/rt2870/built-in.o:(.text+0x111dd): first defined here
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Resolved whitespace-related checkpatch findings in .h files
Signed-off-by: Andres More <more.andres@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Resolved checkpatch findings, but some long lines warnings.
ERROR: space required before the open parenthesis '('
ERROR: spaces required around that
Signed-off-by: Andres More <more.andres@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Commit 902d241129 converted U32 to u32
which you would think would be just fine. Unfortunatly, it seems that
VIA only builds their code on a 32bit processor (which makes sense if
you think about it), but this doesn't work on x86-64. So fix up the few
places where this really wanted to be an unsigned long width.
Cc: Charles Clément <caratorn@gmail.com>
Cc: Forest Bond <forest@alittletooquiet.net>,
Cc: Andres More <more.andres@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Calcu_LinkQual is already defined a couple lines earlier.
Signed-off-by: Charles Clément <caratorn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Replace custom macro IS_MULTICAST_ADDRESS by is_multicast_ether_addr
from <linux/etherdevice.h>.
Remove linux/if_ether.h include as it is included in
linux/etherdevice.h already.
Signed-off-by: Charles Clément <caratorn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is a patch to the phy_calibration.c that fixes up almost all
warnings and errors (except 80 characters limit and lack of tabs errors)
found by the checkpatch.pl tool
Signed-off-by: Timofey Trofimov <tumoxep@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch fixes line length, brace style and whitespace issues in the
mac_structures.h file found by the checkpatch.pl tool
Signed-off-by: Adam Latham <adam.latham@unisontorbay.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch fixes the use of //C99 comments in the mac_structures.h found by
the checkpatch.pl tool
Signed-off-by: Adam Latham <adam.latham@unisontorbay.org.uk>
Acked-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The C99 specification states in section 6.11.5:
The placement of a storage-class specifier other than at the beginning
of the declaration specifiers in a declaration is an obsolescent
feature.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is a patch to the pcl812.c file that fixes up the following
issues:
ERROR: code indent should use tabs where possible x 27
WARNING: line over 80 characters x 37
WARNING: please, no space before tabs x 13
WARNING: braces {} are not necessary for single statement blocks x 2
WARNING: printk() should include KERN_ facility level x 22
WARNING: braces {} are not necessary for any arm of this statement x 5
Signed-off-by: Gustavo Silva <silvagustavo@users.sourceforge.net>
Acked-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
I fixed indentation in one place and two long lines, a space and a brace
found by checkpatch.pl and fixed some long lines and whitespace around an =.
Signed-off-by: Lars Lindley <lindley@coyote.org>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The dmm32at.c and comedi_bond.c comedi driver files contain an
instructional comment block copied over from skel.c about how to format
a driver comment block. This comment was modified in skel.c by a
previous patch in this series to stop Comedi's 'dump_doc' script
treating it as an actual driver comment block. There isn't any need to
repeat this comment block in the other source files, so rather than
modify it, this patch just removes it from those files.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The Comedi team have a script 'dump_doc' to extract text from the driver
comment block (starting with line 'Driver:') in (most of) the comedi
driver source files. This was recently updated to allow and strip off a
" * " prefix at the start of each line (well actually, it uses the perl
substitution 's/^ ?\* ?//').
The skel.c file contains an instructional comment block about how to
format this driver comment block, but the updated 'dump_doc' script
mistakenly treats this as a valid driver comment block. This patch adds
some extra whitespace to stop the instructional comment block being
treated as a valid driver comment block by Comedi's 'dump_doc' script.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Previous whitespace changes to das08.c removed some whitespace from a
"driver comment block" that the Comedi team would like to keep. "Header
continuation lines" in this comment block should be indented with
whitespace. (This is after the " * " at the start of each line.)
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is a patch to the quatech_daqp_cs.c file that fixes up the following
issues:
ERROR: code indent should use tabs where possible x 1
WARNING: line over 80 characters x 1
WARNING: braces {} are not necessary for single statement blocks x 10
WARNING: printk() should include KERN_ facility level x 6
Signed-off-by: Gustavo Silva <silvagustavo@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is a patch to the pcmda12.c file that fixes up five printk() warning issues
Signed-off-by: Gustavo Silva <silvagustavo@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is a patch to the pcl816.c file that fixes up the following
issues:
ERROR: code indent should use tabs where possible x 2
WARNING: line over 80 characters x 34
WARNING: please, no space before tabs x 1
WARNING: braces {} are not necessary for single statement blocks x 6
WARNING: printk() should include KERN_ facility level x 15
WARNING: braces {} are not necessary for any arm of this statement x 1
Signed-off-by: Gustavo Silva <silvagustavo@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is a patch to the pcl711.c file that fixes up printk()
warning issues.
Signed-off-by: Gustavo Silva <silvagustavo@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is a patch to the me4000.c file that fixes up the following
issues:
ERROR: space required after that close brace '}' x 13
ERROR: spaces required around that ':' (ctx:VxV) x 3
WARNING: line over 80 characters x 96
WARNING: braces {} are not necessary for any arm of this statement x 2
Signed-off-by: Gustavo Silva <silvagustavo@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Remove all remaining typedefs from comedi drivers
Signed-off-by: Arun Thomas <arun.thomas@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Move the PCI devinit/devexit routines to the respective C source files
instead of calling COMEDI_PCI_INITCLEANUP
Signed-off-by: Arun Thomas <arun.thomas@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Move the init/exit routines to the respective C source files
instead of calling COMEDI_INITCLEANUP
Signed-off-by: Arun Thomas <arun.thomas@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Add MODULE_AUTHOR, MODULE_LICENSE, and MODULE_DESCRIPTION calls
to the respective C source files instead of calling COMEDI_MODULES_MACRO
Signed-off-by: Arun Thomas <arun.thomas@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is a patch to the ni_labpc.c file that fixes all, printk() should
include KERN-facility level, warnings found by the checkpatch.pl tool
Signed-off-by: Maurice Dawson <mauricedawson2699@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is a patch to the file am9513.h that fixes missing space warnings
found by the checkpatch.pl tool.
Signed-off-by: Bob Beattie <bob.beattie@ntlworld.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
A patch for s626.c to fix some of the warnings
reported by the checkpatch.pl tool, namely,
printk() should include KERN_ facility level
unnecessary whitespace before a quoted newline
Signed-off-by: John Sheehan <john.d.sheehan@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
A patch for unioxx5.c which fixes "trailing statements
should be on next line" errors raised by the
chechpatch.pl tool
Signed-off-by: John Sheehan <john.d.sheehan@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch fixes some long line lengths in gsc_hpdi.c as found by the
checkpatch.pl tool
Signed-off-by: Mark Rankilor <reodge@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch cleans up some various warnings generated from checkpatch.pl
Signed-off-by: Mark Rankilor <reodge@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
These checks are obviously pointless because kfree() can handle null
dereferences.
But really the main problem is that if the pointers were null that would
cause problems on the ealier lines. The dereferences would cause an
oops and the _release() functions use ->priv to determine which IRQ to
free. I looked into it and quite a few of the detach functions assume
link->priv is non-null. It seems like we can remove these checks.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Reduce stack usage in serial_2002_open() by allocating dig_in_config,
dig_out_config, chan_in_config, and chan_out_config temporary arrays
using kcalloc() and freeing them when done with.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The comedi device 'detach' method for the serial2002 driver has an
off-by-one error in its loop for freeing data belonging to its
subdevices. Fix it.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The comedi device 'open' method for the serial2002 driver frees any old
'maxdata_list' and 'range_table_list' arrays belonging to a subdevice
and allocates them again, but was missing checks for allocation failure.
If an allocation fails, free the 'maxdata_list' and 'range_table_list'
arrays for all subdevices and return an error.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Some comedi drivers should return an error from their 'open' method when
something goes wrong. Change the prototype of the 'open' method in
'struct comedi_device' to allow this, and change the drivers that use it.
Propagate any error to the 'open' file operation.
The corresponding 'close' method won't be called when the 'open' method
fails, so drivers failing the 'open' need to clean up any mess they
created.
The dt9812 and serial2002 drivers can now return an error on 'open'.
The jr3_pci driver also uses the 'open' method but doesn't fail it.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is a patch to the ni_tio.c file that fixes a brace warning found by
the checkpatch.pl tool
Signed-off-by: Samuel Richardson <sam.j.richardson@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6:
wimax/i2400m: fix missing endian correction read in fw loader
net8139: fix a race at the end of NAPI
pktgen: Fix accuracy of inter-packet delay.
pkt_sched: gen_estimator: add a new lock
net: deliver skbs on inactive slaves to exact matches
ipv6: fix ICMP6_MIB_OUTERRORS
r8169: fix mdio_read and update mdio_write according to hw specs
gianfar: Revive the driver for eTSEC devices (disable timestamping)
caif: fix a couple range checks
phylib: Add support for the LXT973 phy.
net: Print num_rx_queues imbalance warning only when there are allocated queues
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6:
PCI: clear bridge resource range if BIOS assigned bad one
PCI: hotplug/cpqphp, fix NULL dereference
Revert "PCI: create function symlinks in /sys/bus/pci/slots/N/"
PCI: change resource collision messages from KERN_ERR to KERN_INFO
There are devices out there which are PCI Hot-plug controllers with
compaq PCI IDs, but are not bridges, hence have pdev->subordinate
NULL. But cpqphp expects the pointer to be non-NULL.
Add a check to the probe function to avoid oopses like:
BUG: unable to handle kernel NULL pointer dereference at 00000050
IP: [<f82e3c41>] cpqhpc_probe+0x951/0x1120 [cpqphp]
*pdpt = 0000000033779001 *pde = 0000000000000000
...
The device here was:
00:0b.0 PCI Hot-plug controller [0804]: Compaq Computer Corporation PCI Hotplug Controller [0e11:a0f7] (rev 11)
Subsystem: Compaq Computer Corporation Device [0e11:a2f8]
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
This reverts commit 75568f8094.
Since they're just a convenience anyway, remove these symlinks since
they're causing duplicate filename errors in the wild.
Acked-by: Alex Chiang <achiang@canonical.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
We can often deal with PCI resource issues by moving devices around. In
that case, there's no point in alarming the user with messages like these.
There are many bug reports where the message itself is the only problem,
e.g., https://bugs.launchpad.net/ubuntu/+source/linux/+bug/413419 .
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
i2400m_fw_hdr_check() was accessing hardware field
bcf_hdr->module_type (little endian 32) without converting to host
byte sex.
Reported-by: Данилин Михаил <mdanilin@nsg.net.ru>
Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com>
* 'urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6:
pcmcia: avoid validate_cis failure on CIS override
pcmcia: dev_node removal bugfix
pcmcia: yenta_socket.c Remove extra #ifdef CONFIG_YENTA_TI
pcmcia: only keep saved I365_CSCINT flag if there is no PCI irq
