PUCHAR was unsigned char *, use that instead
Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Cc: Arnaud Patard <apatard@mandriva.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The port related macros in osdef.h are replaced with calls to out?()
and in?(). This removes the last macros defined in osdef.h, so this
file is no longer needed.
Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Cc: Arnaud Patard <apatard@mandriva.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
These were just macros for memset and memcpy, so use those instead.
Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Cc: Arnaud Patard <apatard@mandriva.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Remove ifdefs that check LINUX_VERSION_CODE as this is
not needed in the staging tree.
Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Cc: Arnaud Patard <apatard@mandriva.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This fixes compiler warning format '%x' expects type 'unsigned int',
but argument 2 has type 'long unsigned int'
Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Cc: Arnaud Patard <apatard@mandriva.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The standard layer 3 ping utility can use the record route (RR) option
of IP to collect route data for sent ping messages (ping -R). This
patch introduces comparable functionality for batman-adv ICMP messages.
The patch adds a second batman ICMP packet format (icmp_packet_rr) such
that up to 17 MAC addresses can be recorded (sufficient for up to 8
hops per direction). When no RR is wanted, the old icmp_packet without
the RR overhead can be sent.
Signed-off-by: Daniel Seither <post@tiwoc.de>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
[sven.eckelmann@gmx.de: Rework on top of current version]
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch adds interface alternating to the new bonding feature. By
default, we now try to avoid forwarding packets on the receiving
interface, instead choosing alternative interfaces. This feature
works only on nodes which have multiple interfaces connected to the
mesh. This approach should reduce problems of the half-duplex nature
of WiFi Hardware and thus increase performance.
Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Acked-by: Marek Lindner <lindner_marek@yahoo.de>
[sven.eckelmann@gmx.de: Rework on top of current version]
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch introduces bonding functionality to batman-advanced, targeted
for the 0.3 release. As we are able to route the payload traffic as we
want, we may use multiple interfaces on multihomed hosts to transfer data
to achieve higher bandwidth. This can be considered as "light Multi Path
Routing" for single hop connections.
To detect which interfaces of a peer node belong to the same host, a
new flag PRIMARIES_FIRST_HOP is introduced. This flag is set on the first hop
of OGMs of the primary (first) interface, which is broadcasted on all
interfaces. When receiving such an OGM, we can learn which interfaces
belong to the same host (by assigning them to the primary originator).
Bonding works by sending packets in a round-robin fashion to the available
interfaces of a neighbor host, if multiple interfaces are available. The
neighbor interfaces should be almost equally good to reach.
To avoid interferences (i.e. sending on the same channel), only neighbor
interfaces with different mac addresses and different outgoing interfaces
are considered as candidates.
Bonding is deactivated by default, and can be activated by
echo 1 > /sys/class/net/bat0/mesh/bonding
for each individual node.
Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
[sven.eckelmann@gmx.de: Rework on top of current version]
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch changes the sequence number range from 8 or 16 bit to 32 bit.
This should avoid problems with the sequence number sliding window algorithm
which we had seen in the past for broadcast floods or malicious packet
injections. We can not assure 100% security with this patch, but it is quite
an improvement over the old 16 bit sequence numbers:
* expected window size can be increased (4096 -> 65536)
* 64k packets in the right order would now be needed to cause a loop,
which seems practically impossible.
Furthermore, a TTL field has been added to the broadcast packet type, just to
make sure.
These changes required to increase the compatibility level once again.
Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
[sven.eckelmann@gmx.de: Change atomic64_* back to atomic_*, Rework on
top of current version]
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
When trying to set the originator interval to 40ms, we are asked to set
it to a minimum value of 40ms. This patch permits setting an
originator interval of JITTER*2 (40ms by default) now.
Signed-off-by: Linus Lüssing <linus.luessing@web.de>
Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
All code for debugfs is ignored when the creation of the batman-adv root
directory in debugfs fails. It must also be ignored when the
debugfs_create_dir tells us that debugfs is not implemented to prevent
possible crashes in the future.
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Functions and variables which are used only inside one object file can
be declared as static. This helped to find unused functions/variables
* mainIfAddr_default
* main_if_was_up
and functions with declarations but missing definitions
* hash_debug
* orig_find
* send_own_packet_work
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Remove the last uses of MAC_FMT
Signed-off-by: Joe Perches <joe@perches.com>
[sven.eckelmann@gmx.de: Adapted for current batman-adv version]
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
[sven.eckelmann@gmx.de: Rework on top of current version]
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch removes the extra usage output which came when
the sysfs files were read.
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Files which represent more than a single attribute aren't allowed in
sysfs. As we have some files which aren't essential and are lists or
tables aggregated from data from different places inside batman-adv, we
must place them in a filesystem without such a restriction.
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
batctl uses /dev/batman-adv to send special batman-adv icmp packets to
other nodes in the mesh. To get it working with multiple batX devices we
must ensure that every mesh device can have their own socket which is
used to inject those packets in exactly one mesh.
The current implementation still doesn't allow to use complete separated
meshes as we rely on structures which are not part of the private data
of a batman device.
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
In today linux-next I got a compile warning in staging/batman-adv.
This is due a struct bin_attribute read function prototype change and the driver was not updated.
This patch solves the issue
Signed-off-by: Javier Martinez Canillas <martinez.javier@gmail.com>
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
copy_to_user() returns the number of bites remaining but we want to
return a negative error code here.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
vis_interval does not neccesarily needs to be a variable, as there is
no way to change it anyway (and probably no need to). We can therefore
remove yet another global variable.
Thanks Marek for pointing this out.
Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
[sven.eckelmann@gmx.de: Rework on top of current version]
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Add documents about new sysfs entries in
* /sys/class/net/<iface>/batman-adv/mesh_iface
* /sys/class/net/<mesh_iface>/mesh/vis_mode
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
batman-adv is receiving and sending the packets of its own ether type
on a very early/low level. Therefore we need to add explicit hooks to
give netfilter/ebtables a chance to filter them.
Reported-by: Antonio Quartulli <ordex@ritirata.org>
Signed-off-by: Linus Lüssing <linus.luessing@web.de>
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The hardif_attr and the bat_attr struct share the same attributes,
hence it is not necessary to specify 2 different structs.
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
A really trivial patch to solve a warning when compiling staging/pohmelfs
Signed-off-by: Javier Martinez Canillas <martinez.javier@gmail.com>
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Remove the DT_3155_{SUCCESS/FAILURE} errno defines and use the
kernel provided ones.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Scott Smedley <ss@aao.gov.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This fixes the different address spaces noise when copying data to/from
user space to kernel space.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The third argument of dma_alloc_coherent() is of type dma_addr_t and is defined
as u64 for x86_64, while the member 'device_base' of struct dma_coherent_mem is
defined as u32.
While at it, clean up the code. Now if dev->dma_mem != NULL all the fields/members
are already properly initialized.
Signed-off-by: Marin Mitov <mitov@issp.bas.bg>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Fixed most problems pointed out by checkpatch.pl in file r8192U_core.c
up to line 500
Signed-off-by: Mike Gilks <mike.kernel@gilksonline.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Removed kfree(NULL checks) that were not necessary
Signed-off-by: Scott Kidder <scott.kidder11@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Fixed issues found by checkpatch.pl including adding KERN_
facility levels to printk() calls and C99 comments.
Signed-off-by: Scott Kidder <scott.kidder11@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
wrq->name is only 16 characters long but "IEEE 802.11-MIMO" is 16
characters + a NULL character, so it's too long. This patch changes it
to "IEEE 802.11abgn".
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
On Mon, 2010-06-07 at 12:02 -0700, Luis R. Rodriguez wrote:
> this driver is unmaintained and its only purpose is as a
> source of documentation for developers working on ar9170 and carl9170.
> Once carl9170 gets 11n support and merged upstream then this driver
> can be removed.
Then the TODO file should be updated.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is a patch to zdusb.c that fixes whitespace,
C99 comment, and other style issues found by the
checkpatch.pl tool
Signed-off-by: Scott Kidder <scott.kidder11@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This doesn't change the behavior. It just silences a sparse warning.
drivers/staging/wlan-ng/hfa384x_usb.c:2810:62: warning: dubious: !x | !y
The point of the bitwise OR is so that a logical OR could short circuit
the second call to test_and_set_bit().
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Some errors crept in due to a previous patch that I missed.
This fixes them up so the driver continues to build, sorry about that.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
