When a new voice is selected, we set volume and pitch appropriate for
the voice. We need to use the numeric index corresponding to the
voice when indexing into the volume and pitch tables, rather than
the raw user input that was used to select the voice.
Note that using the raw input can also lead to an invalid memory read
in the case of invalid or malicious user input.
Signed-off-by: Christopher Brannon <chris@the-brannons.com>
Acked-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Well, there is no need to use strcmp since we can make a test of similar semantic by using the var_id field of param.
I moved the test into the VAR_NUM:VAR_TIME case since VAR_STRING will never be "voice".
spk_xlate isn't used anymore (in line 628), then there is no difference between using cp and buf in VAR_STRING case.
Besides, buf is a const char and those changes remove one uneeded line.
I created the function spk_reset_default_value because it clarifies the code and allows code reusing.
Signed-off-by: Raphael S.Carvalho <raphael.scarv@gmail.com>
Acked-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Several speakup drivers are for ISA cards and are useless on systems
without ISA slots. Make them depend on ISA || COMPILE_TEST.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Smatch reports the following:
CHECK drivers/staging/rtl8188eu/core/rtw_xmit.c
drivers/staging/rtl8188eu/core/rtw_xmit.c:1570 dequeue_one_xmitframe() info: ignoring unreachable code.
This code uses a while construction that has an unconditional break. This part
of the code was restructured to use an if statement and the dead code was
removed.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Smatch reports the following:
drivers/staging/rtl8188eu/core/rtw_recv.c:211 rtw_free_recvframe() warn: variable dereferenced before check 'precvframe' (see line 207)
drivers/staging/rtl8188eu/core/rtw_recv.c:1803 amsdu_to_msdu() warn: variable dereferenced before check 'sub_skb' (see line 1784)
The code was rearranged to eliminate the dereference before the check.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Smatch reported the following warning:
drivers/staging/rtl8188eu/hal/HalPhyRf_8188e.c:1876 PHY_APCalibrate_8188E() info: ignoring unreachable code.
Once the unreachable code was removed, the entire routine was removed, which
led to the warning that phy_APCalibrate_8188E() was not used. It was also deleted
along with some unused defines.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A misplaced _func_exit_ macro leads to the following smatch warning:
drivers/staging/rtl8188eu/core/rtw_wlan_util.c:1105 rtw_check_bcn_info() info: ignoring unreachable code.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Smatch reports the following warnings:
drivers/staging/rtl8188eu/hal/odm_HWConfig.c:302 odm_RxPhyStatus92CSeries_Parsing() error: buffer overflow 'pPhyInfo->RxPwr' 2 <= 2
drivers/staging/rtl8188eu/hal/odm_HWConfig.c:319 odm_RxPhyStatus92CSeries_Parsing() error: buffer overflow 'pPhyInfo->RxMIMOSignalStrength' 2 <= 2
drivers/staging/rtl8188eu/hal/odm_HWConfig.c:322 odm_RxPhyStatus92CSeries_Parsing() error: buffer overflow 'pPhyStaRpt->path_rxsnr' 2 <= 2
drivers/staging/rtl8188eu/hal/odm_HWConfig.c:322 odm_RxPhyStatus92CSeries_Parsing() error: buffer overflow 'pPhyInfo->RxSNR' 2 <= 2
drivers/staging/rtl8188eu/hal/odm_HWConfig.c:323 odm_RxPhyStatus92CSeries_Parsing() error: buffer overflow 'pPhyStaRpt->path_rxsnr' 2 <= 2
drivers/staging/rtl8188eu/hal/odm_HWConfig.c:323 odm_RxPhyStatus92CSeries_Parsing() error: buffer overflow 'dm_odm->PhyDbgInfo.RxSNRdB' 2 <= 2
These warnings are again due to the number of radio patchs being increased
to 3 without adjustments to the array sizes.
A duplicate and redundant definition was also removed.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Smatch reports the following:
drivers/staging/rtl8188eu/hal/rtl8188e_hal_init.c:1500 hal_EfusePgPacketWriteData() info: ignoring unreachable code.
drivers/staging/rtl8188eu/hal/rtl8188e_hal_init.c:2188 Hal_ReadTxPowerInfo88E() error: buffer overflow 'pHalData->Index24G_CCK_Base[rfPath]' 14 <= 14
drivers/staging/rtl8188eu/hal/rtl8188e_hal_init.c:2190 Hal_ReadTxPowerInfo88E() error: buffer overflow 'pHalData->Index24G_BW40_Base[rfPath]' 14 <= 14
drivers/staging/rtl8188eu/hal/rtl8188e_hal_init.c:2196 Hal_ReadTxPowerInfo88E() error: buffer overflow 'pHalData->Index24G_CCK_Base[rfPath]' 14 <= 14
drivers/staging/rtl8188eu/hal/rtl8188e_hal_init.c:2197 Hal_ReadTxPowerInfo88E() error: buffer overflow 'pHalData->Index24G_BW40_Base[rfPath]' 14 <= 14
The first of these is trivial. The rest are due to an off-by-one error
in a loop over the channels.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Smatch reports the following:
drivers/staging/rtl8188eu/hal/rtl8188e_phycfg.c:857 getTxPowerIndex88E() error: buffer overflow 'pHalData->BW20_24G_Diff' 2 <= 2
drivers/staging/rtl8188eu/hal/rtl8188e_phycfg.c:864 getTxPowerIndex88E() error: buffer overflow 'pHalData->BW20_24G_Diff' 2 <= 2
The array in question is large enough to handle RADIO_PATH_X, where X is A or B.
The lines in question refer to RADIO_PATH_C, which is defined as 2.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Smatch reports the following:
drivers/staging/rtl8188eu/os_dep/ioctl_linux.c:4891 set_group_key() warn: missing break? reassigning 'keylen'
As it suggests, there is a missing break statement.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Smatch reports the following:
drivers/staging/rtl8188eu/os_dep/ioctl_linux.c:941 rtw_wx_set_pmkid() warn: add some parenthesis here?
drivers/staging/rtl8188eu/os_dep/ioctl_linux.c:1042 rtw_wx_get_range() warn: assigning (-78) to unsigned variable 'range->avg_qual.level'
drivers/staging/rtl8188eu/os_dep/ioctl_linux.c:2629 rtw_get_ap_info() warn: add some parenthesis here?
drivers/staging/rtl8188eu/os_dep/ioctl_linux.c:4043 rtw_rereg_nd_name() warn: add some parenthesis here?
drivers/staging/rtl8188eu/os_dep/ioctl_linux.c:4052 rtw_rereg_nd_name() warn: add some parenthesis here?
The warnings calling for adding parentheses all have "if (!memcmp() == true)" and
are fixed by removing the "==true" part.
The warning where a negative number is stored in an unsigned variable is fixed
by biasing the result by 256.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Smatch reports the following warning:
drivers/staging/rtl8188eu/hal/usb_ops_linux.c:614 usb_read_port() warn: variable dereferenced before check 'precvbuf' (see line 611)
Fixing this particular warning required some refactoring of the code.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Smatch reports the following warning:
drivers/staging/rtl8188eu/os_dep/osdep_service.c:634 rtw_change_ifname() warn: variable dereferenced before check 'padapter' (see line 630)
The dereference in question is deferred until the validity of 'padapter' is verified.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Smatch reports the following:
drivers/staging/rtl8188eu/os_dep/recv_linux.c:227 rtw_recv_indicatepkt() warn: variable dereferenced before check 'precv_frame' (see line 139)
The test in this location is removed and added in the free routine.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Smatch reports the following situations:
drivers/staging/rtl8188eu/core/rtw_efuse.c:589 rtw_efuse_map_write() error: buffer overflow 'newdata' 8 <= 8
drivers/staging/rtl8188eu/core/rtw_efuse.c:598 rtw_efuse_map_write() error: buffer overflow 'newdata' 8 <= 8
drivers/staging/rtl8188eu/core/rtw_efuse.c:681 rtw_BT_efuse_map_write() error: buffer overflow 'newdata' 8 <= 8
drivers/staging/rtl8188eu/core/rtw_efuse.c:690 rtw_BT_efuse_map_write() error: buffer overflow 'newdata' 8 <= 8
In these cases, it is possible to write beyond the end of an array.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In this file, a "return -1" immediately follows a "return 0". Remove the
second line.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Smatch shows the following warning:
drivers/staging/rtl8188eu/core/rtw_ieee80211.c:161 rtw_set_ie() info: ignoring unreachable code.
The cause is a module exit tracing statement after a return.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Smatch reports the following warning:
"drivers/staging/rtl8188eu/core/rtw_mlme_ext.c:8328 mlme_evt_hdl()
error: buffer overflow 'wlanevents' 24 <= 24"
8321 /* checking if event code is valid */
8322 if (evt_code >= MAX_C2HEVT) {
^^^^^^^^^^^^^^^^^^^^^^
8323 RT_TRACE(_module_rtl871x_cmd_c_, _drv_err_, ("\nEvent Code(%d) mismatch!\n", evt_code));
8324 goto _abort_event_;
8325 }
8326
8327 /* checking if event size match the event parm size */
8328 if ((wlanevents[evt_code].parmsize != 0) &&
^^^^^^^^^^^^^^^^^^^^
8329 (wlanevents[evt_code].parmsize != evt_sz)) {
8330 RT_TRACE(_module_rtl871x_cmd_c_, _drv_err_,
8331 ("\nEvent(%d) Parm Size mismatch (%d vs %d)!\n",
8332 evt_code, wlanevents[evt_code].parmsize, evt_sz));
8333 goto _abort_event_;
8334 }
This warning results because the number of items in "enum rtw_c2h_event",
which determines the value of MAX_C2HEVT, is one more than in "struct wlanevents".
Adding an extra dummy event to the latter fixes the problem.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Smatch reports the following warning:
"drivers/staging/rtl8188eu/hal/rtl8188e_hal_init.c:2008
Hal_ReadPowerValueFromPROM_8188E()
error: buffer overflow 'pwrInfo24G->IndexBW40_Base[rfPath]' 5 <= 5"
drivers/staging/rtl8188eu/hal/rtl8188e_hal_init.c
2005 /* 2.4G default value */
2006 for (group = 0; group < MAX_CHNL_GROUP_24G; group++) {
2007 pwrInfo24G->IndexCCK_Base[rfPath][group] = EEPROM_DEFAULT_24G_INDEX;
2008 pwrInfo24G->IndexBW40_Base[rfPath][group] = EEPROM_DEFAULT_24G_INDEX;
The reason is that IndexCCK_Base[] has MAX_CHNL_GROUP_24G elements, but
IndexBW40_Base is smaller by 1. Make them both have MAX_CHNL_GROUP_24G
elements.
Reported by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
compare_ether_addr is being removed so remove
even the commented out code referring to it.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Preliminary to removing compare_ether_addr altogether:
Use the new bool function ether_addr_equal to add
some clarity and reduce the likelihood for misuse
of compare_ether_addr for sorting.
Additionally:
Used is_zero_ether_addr, removed now unused variable
Converted uses of &foo[0] to foo
Done via cocci script: (and a little typing)
$ cat compare_ether_addr.cocci
@@
expression a,b;
@@
- !compare_ether_addr(a, b)
+ ether_addr_equal(a, b)
@@
expression a,b;
@@
- compare_ether_addr(a, b)
+ !ether_addr_equal(a, b)
@@
expression a,b;
@@
- !ether_addr_equal(a, b) == 0
+ ether_addr_equal(a, b)
@@
expression a,b;
@@
- !ether_addr_equal(a, b) != 0
+ !ether_addr_equal(a, b)
@@
expression a,b;
@@
- ether_addr_equal(a, b) == 0
+ !ether_addr_equal(a, b)
@@
expression a,b;
@@
- ether_addr_equal(a, b) != 0
+ ether_addr_equal(a, b)
@@
expression a,b;
@@
- !!ether_addr_equal(a, b)
+ ether_addr_equal(a, b)
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This is a patch to fwserial.c that wraps a line which previously exceeded the 80
character limit warning found by checkpatch.pl. This driver is now warning and
error free, according to checkpatch.pl
Signed-off-by: Jon Bernard <jbernard@tuxion.com>
Reviewed-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixed space prohibition before semicolon, particularly:
nvm.c:106: WARNING: space prohibited before semicolon
nvm.c:1098: WARNING: space prohibited before semicolon
nvm.c:1279: WARNING: space prohibited before semicolon
nvm.c:2834: WARNING: space prohibited before semicolon
nvm.c:3361: WARNING: space prohibited before semicolon
nvm.c:4453: WARNING: space prohibited before semicolon
Signed-off-by: Aldo Iljazi <neonsync1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixed a few of the coding style issues reported by checkpatch.pl
Signed-off-by: Faris de Haan <farisdehaan@gmail.com>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Casting the return value which is a void pointer is redundant.
The conversion from void pointer to any other pointer type is
guaranteed by the C programming language.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixed some of the coding style issues reported by checkpatch.pl
Signed-off-by: Faris de Haan <farisdehaan@gmail.com>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Adding some trivial formatting suggestions made by Dan Carpenter to
the TODO.
Signed-off-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove braces from a few single line if statements.
Signed-off-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The rcv_pend_lock spinlock isn't used anymore. remove it.
Signed-off-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
phy_lock is no longer used in any useful code, it's all been moved into
a phy_device. Remove the lock definition and init.
Signed-off-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch renames the struct board_t to dgnc_board. board_t
wasn't a good name for it since the _t suffix is for typedefs.
Signed-off-by: Lidza Louina <lidza.louina@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Casting the return value which is a void pointer is redundant.
The conversion from void pointer to any other pointer type is
guaranteed by the C programming language.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Code should be for the kernel version it is merged in.
Version check is not necessary.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Code should be for the kernel version it is merged in.
Version check is not necessary.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Change the MODULE_DESCRIPTION to something useful instead of the
generic "Comedi low-level driver".
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use the dev->read_subdev to get the comedi_subdevice instead of accessing
the dev->subdevices array directly.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For aesthetic reasons, rename this function.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For aesthetic reasons, reorder the #include list.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tidy up the multi-line comments to follow the CodingStyle.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add some whitespace to tidy up the subdevice init.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Interrupt support in this driver is optional. Don't fail the attach of the
board if the request_irq() fails.
Only allocate and setup the subdevice for the interrupt if the request_irq()
was successful.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The enabled state of the interrupt can be checked by reading the control
register.
Remove 'enabled_irq' from the private data.
Since the private data is now empty, remove it completely and remove the
allocation of it in parport_attach().
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The control register for the parallel port is readable so there is no need
to cache the current value in the private data.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rename this function to better describe it's use.
Use comedi_dio_update_state() to handle the boilerplate code to update
the subdevice s->state.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
