These data will be kmemdup()'ed on
platform_device_add_resources() and platform_device_add_data()
This patch removed "const" to avoid section type conflict
with r8a7790_boards_compat_dt
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
SH-PFC:
* Entries for INTC external IRQs
* Remove dependency on GPIOLIB
* PFC support for r8a7790 SoC
* Pinmux support for r8a7778 SoC
* Increase pin group and function coverage for sh7372, r8a7740,
r8a7778, r8a7779 and r8a7790 SoCs
* Use pinctrl mapping on mackerel, ap4evb, armadillo800eva,
bonito, bockw, lager boards
* Use RCAR_GP_PIN macro in marzen board
* Remove unused GPIOs for sh7372, sh73a0, r8a7740 and r8a7790 SoCs
* Add bias (pull-up/down) pinconf support for r8a7740 SoC
* Add VCCQ support for sh73a0
GPIO car:
* Add RCAR_GP_PIN macro
* Add support for IRQ_TYPE_EDGE_BOTH
* Make the platform data gpio_base field signed
The GPIO changes have been included as the RCAR_GP_PIN and
IRQ_TYPE_EDGE_BOTH changes are depended on by SH-PFC changes.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)
iQIcBAABAgAGBQJRrvTrAAoJENfPZGlqN0++OGkP/0ZqhzLRSqojR4YgoWlsL2UE
lKS41m8/eW2mPbyW2U+rpSWzPghJic9b9AgyKZXcpV5kzp2GQLzyLqRT3gqOoDP/
/4mxstqoCpvHq0+UsGSlv2yk9zMzYjL7dDbGslPhVXZD5SmGN/NM0W80le37ZDEd
UqIzg6O/dB+vZl343nXrZKvGc73HlDY9EiWhpgB6tbLiUvmbT+hATTg+ExY8cwEF
742klazJoqN+DVF6ihx7BQwDWs/beUyqp+ii0rfzcU5yI+fWe0cyHa+v64rZFQhI
F2rWLQu6rkDRCpcwvfu21azDKPFG8cMiV0xxgxF5bvg6STUfiAEpaCmjw1v+F30g
S+TdoeUlXkH1x761CDJ0qo0N4SQ2ueJ8/UPMOaA4cRU9mGCSp4o+S8PlUCd1HSVH
vKQzfxnyaqt0LPi23KAkXbAiwxwrq4ru06XvsuC9KbAdAK9n+FpnJKFZ7fv8c1uw
8a7FDSFdVnQ6E6DKvxl33JfDMsPEpFmikw+Nr/1Jnxms9THpCMphhZVc4mUDmdQT
BLxSXa2Y5ihiQoaHjJnrENUGRI4o4oZwVDCU5i0eUQBeqbx00UEW85iUNiVPecW1
aKphnrhoxqQZMHRrU2MqCe2mY5SPSnbKdc2YVcTW9/yxS7Q16txmAsiDyfiVB+bd
ZHw324BCBEvSk4NM2syW
=zNOH
-----END PGP SIGNATURE-----
mergetag object 413bfd0e67
type commit
tag renesas-soc-for-v3.11
tagger Simon Horman <horms@verge.net.au> 1370590998 +0900
Renesas ARM-based SoC updates for v3.11
* Increased clock coverage for r8a7740, r8a73a4, r8a7778 and r8a7790
* Use fixed clock ratio for r8a7778
* Always use shmobile_setup_delay for sh73a0
* Add add CPUFreq support for sh73a0
* Check kick bit before changing rate on sh73a0
* Do not overwrite all div4 clock operations on sh73a0
* Cleanup SH_FIXED_RATIO_CLK and SH_FIXED_RATIO_CLK macros
* sh73a0: Use DEFINE_RES_MEM*() everywhere
* r8a7740: Make private clock arrays static
* r8a7778: Correct model number
The last four changes listed above are cleanups. I have included them
in this series as all bar the last one are dependencies of non-cleanup
patches.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=9UCz
-----END PGP SIGNATURE-----
Merge tags 'renesas-pinmux-for-v3.11' and 'renesas-soc-for-v3.11' into cleanup
This merge has been performed in order to provide the pre-requisites for
a cleanup patch for the lager board to annotate various structures
with __initdata.
Conflicts:
arch/arm/mach-shmobile/Kconfig
arch/arm/mach-shmobile/include/mach/r8a7778.h
arch/arm/mach-shmobile/setup-r8a7778.c
According to the datasheet, it is not allowed to change div4 clock rates
if an earlier rate change operation is still in progress, as indicated by
a set kick bit.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
An earlier commit "ARM: shmobile: sh73a0: add support for adjusting CPU
frequency" intended to replace some clock operations only for the Z-clock,
instead it replaced them for all div4 clocks, since all div4 clocks share
the same copy of clock operations. Fix this by using a separate clock
operations structure for Z-clock.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Break out the function sh73a0_init_delay() that now
gets called both for the C version of the code and
the DT -reference boards. This way we handle both
cases in the same way.
Allows us to boot with TWD only in the kernel configuration
for C board code. TWD is not yet enabled in the case of
DT -reference - this due to a dependency on CCF.
Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
This patch enables the use of the generic cpufreq-cpu0 driver on sh73a0.
Providing a regulator, a list of OPPs in DT, combined with a virtual
cpufreq-cpu0 platform device and a clock, attached to it is everything,
the cpufreq-cpu0 driver needs. The first sh73a0 platform, implementing
such CPUFreq support is kzm9g-reference.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
On SH73A0 the output of PLL0 is supplied to two dividers, feeding clock to
the CPU core and SGX. Lower CPU frequencies allow the use of lower supply
voltages and thus reduce power consumption.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Both clock-r8a7740.c and clock-r8a7790.c define a div4_clks array as
non-static. Compiling support for both SoCs thus result in a symbol
redefinition. Fix it by defining the arrays as static.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Almost all clock needs main clock which is basis clock on r8a7790.
This patch adds it, and, set its parent/ratio via MD pin.
It is based on v0.05 datasheet
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
This patch adds SDHI register function which needs id number (= 0/1/2)
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
R-Car M1 has many clocks, and it is possible to
read/use clock ratio of these clocks from FRQMRx.
But, these ratio are fixed value and
these are decided by MD pin status.
This patch reads MD pin status,
and used fixed ratio clock for other clocks.
It was tesed on bock-w board.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
DIV6 clocks control each core clocks.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
DIV4 clocks control each core clocks.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
PLL clocks are basis clock for other clock.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Almost all clock needs main clock which is basis clock on r8a73a4.
This patch adds it, and, set parent clock via CKSCR register.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Add clock association for i2c0 and i2c1 for the new DT names.
Signed-off-by: Bastian Hecht <hechtb+renesas@gmail.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
When we use the ethernet device via DT setup, we need to add it
to a lookup list until this is properly handled later in a DT-only
fashion.
Signed-off-by: Bastian Hecht <hechtb+renesas@gmail.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Ether setup code position was scattering.
This patch fixes it up
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
SH_CLK_SET_RATIO() will be trouble without this patch
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Convert code to use DEFINE_RES_MEM*() macros.
These macros were already used in this file,
this change makes their usage consistent throughout the file.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
The correct model name is R-Car M1A or R8A77781; R8A77780 corresponds to R-Car
M1S which is a SH based SoC.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
[horms+renesas@verge.net.au: manually applied]
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Both clock-r8a7740.c and clock-r8a7790.c define a div4_clks array as
non-static. Compiling support for both SoCs thus result in a symbol
redefinition. Fix it by defining the arrays as static.
To avoid further similar issues, also define the main_clks as static.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Replace hardcoded pin numbers with the RCAR_GP_PIN macro to make the
code match the documentation.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Initialize r8a7790 pinmuxing and register mappings for the two debug
serial ports.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Use DEFINE_RES_MEM() and platform_device_register_simple()
to save a couple of lines of code.
Signed-off-by: Magnus Damm <damm@opensource.se>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
"gpio-rcar: Support IRQ_TYPE_EDGE_BOTH" adds support to the R-Car GPIO
driver for IRQ_TYPE_EDGE_BOTH. As hardware support for this feature is
not universal for all SoCs a flag, has_both_edge_trigger, has been
added to the platform data of the driver to allow this feature to be
enabled.
As the r8a7790 SoC hardware supports this feature enable it.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
The list of functions selected by the MOD_SEL2 register was missing
an entry. This caused all entries after this to modify the MOD_SEL2
register incorrectly.
This bug showed up when selecting i2c2_c pins on the Renesas Hurricane board.
This bug has been present since pinmux support was added for the
r8a7779 SoC by 881023d28b ("sh-pfc: Add
r8a7779 pinmux support") in v3.8-rc4.
Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
GPIOLIB dependency handling was added to the PINCTRL core by
commit 2afe822968
Author: Haojian Zhuang <haojian.zhuang@linaro.org>
Date: Thu Mar 28 07:34:19 2013 +0800
pinctrl: core: add dependence of GPIOLIB
There is not need to handle that dependency at the SH Mobile level
anymore. Revert
commit 6722f6cb76
Author: Magnus Damm <damm@opensource.se>
Date: Mon Mar 18 22:58:18 2013 +0900
ARM: shmobile: Disallow PINCTRL without GPIOLIB
Modify mach-shmobile to only select PINCTRL in case of
ARCH_WANT_OPTIONAL_GPIOLIB is set.
This fixes a build error triggered when adding a new SoC
lacking GPIO software support (ARCH_WANT_OPTIONAL_GPIOLIB=n):
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
This patch adds pinmux groups and functions for the two MMCIF and four
SDHI interfaces on r8a73a4 (APE6).
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Fix several errors in Peripheral Function Select register tables for
r8a7790, which prevent various function pins from being correctly
configured.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
IP2[31] func2 is IRQ1A, not IRQ3A
Reported-by: Yusuke Goda <yusuke.goda.sx@renesas.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Add VIN DATA[0:8]/CLK/HSYNC/VSYNC pin groups to R8A7778 PFC driver.
While at it, add SH_PFC_MUX8() macro for 8-bit data busses.
Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
[Sergei: updated the copyrights, added SH_PFC_MUX8() macro for 8-bit data bus,
made use of SH_PFC_*() macros to define the pin groups.]
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
No sh73a0 platform use the function GPIOs API. Remove it.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
