Make sure the machine supports RDRAND, otherwise there is no trusted
source of randomness in the system.
To also check this in the pre-decompression stage, make has_cpuflag()
not depend on CONFIG_RANDOMIZE_BASE anymore.
Signed-off-by: Martin Radev <martin.b.radev@gmail.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lkml.kernel.org/r/20200907131613.12703-73-joro@8bytes.org
Calling down to EFI runtime services can result in the firmware
performing VMGEXIT calls. The firmware is likely to use the GHCB of the
OS (e.g., for setting EFI variables), so each GHCB in the system needs
to be identity-mapped in the EFI page tables, as unencrypted, to avoid
page faults.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
[ jroedel@suse.de: Moved GHCB mapping loop to sev-es.c ]
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lkml.kernel.org/r/20200907131613.12703-72-joro@8bytes.org
When running under SEV-ES, the kernel has to tell the hypervisor when to
open the NMI window again after an NMI was injected. This is done with
an NMI-complete message to the hypervisor.
Add code to the kernel's NMI handler to send this message right at the
beginning of do_nmi(). This always allows nesting NMIs.
[ bp: Mark __sev_es_nmi_complete() noinstr:
vmlinux.o: warning: objtool: exc_nmi()+0x17: call to __sev_es_nmi_complete()
leaves .noinstr.text section
While at it, use __pa_nodebug() for the same reason due to
CONFIG_DEBUG_VIRTUAL=y:
vmlinux.o: warning: objtool: __sev_es_nmi_complete()+0xd9: call to __phys_addr()
leaves .noinstr.text section ]
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200907131613.12703-71-joro@8bytes.org
Add a play_dead handler when running under SEV-ES. This is needed
because the hypervisor can't deliver an SIPI request to restart the AP.
Instead, the kernel has to issue a VMGEXIT to halt the VCPU until the
hypervisor wakes it up again.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200907131613.12703-70-joro@8bytes.org
The APs are not ready to handle exceptions when verify_cpu() is called
in secondary_startup_64().
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lkml.kernel.org/r/20200907131613.12703-69-joro@8bytes.org
The IDT on 64-bit contains vectors which use paranoid_entry() and/or IST
stacks. To make these vectors work, the TSS and the getcpu GDT entry need
to be set up before the IDT is loaded.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200907131613.12703-68-joro@8bytes.org
As part of the GHCB specification, the booting of APs under SEV-ES
requires an AP jump table when transitioning from one layer of code to
another (e.g. when going from UEFI to the OS). As a result, each layer
that parks an AP must provide the physical address of an AP jump table
to the next layer via the hypervisor.
Upon booting of the kernel, read the AP jump table address from the
hypervisor. Under SEV-ES, APs are started using the INIT-SIPI-SIPI
sequence. Before issuing the first SIPI request for an AP, the start
CS and IP is programmed into the AP jump table. Upon issuing the SIPI
request, the AP will awaken and jump to that start CS:IP address.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
[ jroedel@suse.de: - Adapted to different code base
- Moved AP table setup from SIPI sending path to
real-mode setup code
- Fix sparse warnings ]
Co-developed-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200907131613.12703-67-joro@8bytes.org
The code at the trampoline entry point is executed in real-mode. In
real-mode, #VC exceptions can't be handled so anything that might cause
such an exception must be avoided.
In the standard trampoline entry code this is the WBINVD instruction and
the call to verify_cpu(), which are both not needed anyway when running
as an SEV-ES guest.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200907131613.12703-66-joro@8bytes.org
Implement the callbacks to copy the processor state required by KVM to
the GHCB.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
[ jroedel@suse.de: - Split out of a larger patch
- Adapt to different callback functions ]
Co-developed-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200907131613.12703-64-joro@8bytes.org
Add two new paravirt callbacks to provide hypervisor-specific processor
state in the GHCB and to copy state from the hypervisor back to the
processor.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200907131613.12703-63-joro@8bytes.org
Handle #VC exceptions caused by #DB exceptions in the guest. Those
must be handled outside of instrumentation_begin()/end() so that the
handler will not be raised recursively.
Handle them by calling the kernel's debug exception handler.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200907131613.12703-62-joro@8bytes.org
Implement a handler for #VC exceptions caused by #AC exceptions. The
#AC exception is just forwarded to do_alignment_check() and not pushed
down to the hypervisor, as requested by the SEV-ES GHCB Standardization
Specification.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200907131613.12703-61-joro@8bytes.org
Implement a handler for #VC exceptions caused by VMMCALL instructions.
This is only a starting point, VMMCALL emulation under SEV-ES needs
further hypervisor-specific changes to provide additional state.
[ bp: Drop "this patch". ]
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
[ jroedel@suse.de: Adapt to #VC handling infrastructure ]
Co-developed-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200907131613.12703-60-joro@8bytes.org
Implement a handler for #VC exceptions caused by INVD instructions.
Since Linux should never use INVD, just mark it as unsupported.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
[ jroedel@suse.de: Adapt to #VC handling infrastructure ]
Co-developed-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200907131613.12703-57-joro@8bytes.org
Implement a handler for #VC exceptions caused by RDTSC and RDTSCP
instructions. Also make it available in the pre-decompression stage
because the KASLR code uses RDTSC/RDTSCP to gather entropy and some
hypervisors intercept these instructions.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
[ jroedel@suse.de: - Adapt to #VC handling infrastructure
- Make it available early ]
Co-developed-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200907131613.12703-55-joro@8bytes.org
Add code to handle #VC exceptions on DR7 register reads and writes.
This is needed early because show_regs() reads DR7 to print it out.
Under SEV-ES, there is currently no support for saving/restoring the
DRx registers but software expects to be able to write to the DR7
register. For now, cache the value written to DR7 and return it on
read attempts, but do not touch the real hardware DR7.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
[ jroedel@suse.de: - Adapt to #VC handling framework
- Support early usage ]
Co-developed-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200907131613.12703-53-joro@8bytes.org
Add handling for emulation of the MOVS instruction on MMIO regions, as
done by the memcpy_toio() and memcpy_fromio() functions.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200907131613.12703-51-joro@8bytes.org
Add a handler for #VC exceptions caused by MMIO intercepts. These
intercepts come along as nested page faults on pages with reserved
bits set.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
[ jroedel@suse.de: Adapt to VC handling framework ]
Co-developed-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200907131613.12703-50-joro@8bytes.org
When a #VC exception is triggered by user-space, the instruction decoder
needs to read the instruction bytes from user addresses. Enhance
vc_decode_insn() to safely fetch kernel and user instructions.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200907131613.12703-49-joro@8bytes.org
The #VC handler needs special entry code because:
1. It runs on an IST stack
2. It needs to be able to handle nested #VC exceptions
To make this work, the entry code is implemented to pretend it doesn't
use an IST stack. When entered from user-mode or early SYSCALL entry
path it switches to the task stack. If entered from kernel-mode it tries
to switch back to the previous stack in the IRET frame.
The stack found in the IRET frame is validated first, and if it is not
safe to use it for the #VC handler, the code will switch to a
fall-back stack (the #VC2 IST stack). From there, it can cause nested
exceptions again.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200907131613.12703-46-joro@8bytes.org
The get_stack_info() functionality is needed in the entry code for the
#VC exception handler. Provide a version of it in the .text.noinstr
section which can be called safely from there.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200907131613.12703-45-joro@8bytes.org
When an NMI hits in the #VC handler entry code before it has switched to
another stack, any subsequent #VC exception in the NMI code-path will
overwrite the interrupted #VC handler's stack.
Make sure this doesn't happen by explicitly adjusting the #VC IST entry
in the NMI handler for the time it can cause #VC exceptions.
[ bp: Touchups, spelling fixes. ]
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200907131613.12703-44-joro@8bytes.org
Allocate and map an IST stack and an additional fall-back stack for
the #VC handler. The memory for the stacks is allocated only when
SEV-ES is active.
The #VC handler needs to use an IST stack because a #VC exception can be
raised from kernel space with unsafe stack, e.g. in the SYSCALL entry
path.
Since the #VC exception can be nested, the #VC handler switches back to
the interrupted stack when entered from kernel space. If switching back
is not possible, the fall-back stack is used.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200907131613.12703-43-joro@8bytes.org
The runtime handler needs one GHCB per-CPU. Set them up and map them
unencrypted.
[ bp: Touchups and simplification. ]
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200907131613.12703-42-joro@8bytes.org
Add the infrastructure to handle #VC exceptions when the kernel runs on
virtual addresses and has mapped a GHCB. This handler will be used until
the runtime #VC handler takes over.
Since the handler runs very early, disable instrumentation for sev-es.c.
[ bp: Make vc_ghcb_invalidate() __always_inline so that it can be
inlined in noinstr functions like __sev_es_nmi_complete(). ]
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200908123816.GB3764@8bytes.org
Setup an early handler for #VC exceptions. There is no GHCB mapped
yet, so just re-use the vc_no_ghcb_handler(). It can only handle
CPUID exit-codes, but that should be enough to get the kernel through
verify_cpu() and __startup_64() until it runs on virtual addresses.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
[ boot failure Error: kernel_ident_mapping_init() failed. ]
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lkml.kernel.org/r/20200908123517.GA3764@8bytes.org
Setup sev-es.c and include the code from the pre-decompression stage
to also build it into the image of the running kernel. Temporarily add
__maybe_unused annotations to avoid build warnings until the functions
get used.
[ bp: Use the non-tracing rd/wrmsr variants because:
vmlinux.o: warning: objtool: __sev_es_nmi_complete()+0x11f: \
call to do_trace_write_msr() leaves .noinstr.text section
as __sev_es_nmi_complete() is noinstr due to being called from the
NMI handler exc_nmi(). ]
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200907131613.12703-39-joro@8bytes.org
Refactor the message printed to the kernel log which indicates whether
SEV or SME, etc is active. This will scale better in the future when
more memory encryption features might be added. Also add SEV-ES to the
list of features.
[ bp: Massage. ]
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lkml.kernel.org/r/20200907131613.12703-38-joro@8bytes.org
Add a sev_es_active() function for checking whether SEV-ES is enabled.
Also cache the value of MSR_AMD64_SEV at boot to speed up the feature
checking in the running code.
[ bp: Remove "!!" in sev_active() too. ]
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lkml.kernel.org/r/20200907131613.12703-37-joro@8bytes.org
Move the assembly coded dispatch between page-faults and all other
exceptions to C code to make it easier to maintain and extend.
Also change the return-type of early_make_pgtable() to bool and make it
static.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200907131613.12703-36-joro@8bytes.org
Move these two functions from kernel/idt.c to include/asm/desc.h:
* init_idt_data()
* idt_init_desc()
These functions are needed to setup IDT entries very early and need to
be called from head64.c. To be usable this early, these functions need
to be compiled without instrumentation and the stack-protector feature.
These features need to be kept enabled for kernel/idt.c, so head64.c
must use its own versions.
[ bp: Take Kees' suggested patch title and add his Rev-by. ]
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lkml.kernel.org/r/20200907131613.12703-35-joro@8bytes.org
Add a separate bringup IDT for the CPU bringup code that will be used
until the kernel switches to the idt_table. There are two reasons for a
separate IDT:
1) When the idt_table is set up and the secondary CPUs are
booted, it contains entries (e.g. IST entries) which
require certain CPU state to be set up. This includes a
working TSS (for IST), MSR_GS_BASE (for stack protector) or
CR4.FSGSBASE (for paranoid_entry) path. By using a
dedicated IDT for early boot this state need not to be set
up early.
2) The idt_table is static to idt.c, so any function
using/modifying must be in idt.c too. That means that all
compiler driven instrumentation like tracing or KASAN is
also active in this code. But during early CPU bringup the
environment is not set up for this instrumentation to work
correctly.
To avoid all of these hassles and make early exception handling robust,
use a dedicated bringup IDT.
The IDT is loaded two times, first on the boot CPU while the kernel is
still running on direct mapped addresses, and again later after the
switch to kernel addresses has happened. The second IDT load happens on
the boot and secondary CPUs.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200907131613.12703-34-joro@8bytes.org
Make sure there is a stack once the kernel runs from virtual addresses.
At this stage any secondary CPU which boots will have lost its stack
because the kernel switched to a new page-table which does not map the
real-mode stack anymore.
This is needed for handling early #VC exceptions caused by instructions
like CPUID.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lkml.kernel.org/r/20200907131613.12703-33-joro@8bytes.org
Make sure segments are properly set up before setting up an IDT and
doing anything that might cause a #VC exception. This is later needed
for early exception handling.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lkml.kernel.org/r/20200907131613.12703-32-joro@8bytes.org
Load the GDT right after switching to virtual addresses to make sure
there is a defined GDT for exception handling.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lkml.kernel.org/r/20200907131613.12703-31-joro@8bytes.org
Handling exceptions during boot requires a working GDT. The kernel GDT
can't be used on the direct mapping, so load a startup GDT and setup
segments.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200907131613.12703-30-joro@8bytes.org
The code to setup idt_data is needed for early exception handling, but
set_intr_gate() can't be used that early because it has pv-ops in its
code path which don't work that early.
Split out the idt_data initialization part from set_intr_gate() so
that it can be used separately.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lkml.kernel.org/r/20200907131613.12703-29-joro@8bytes.org
The xgetbv() function is needed in the pre-decompression boot code,
but asm/fpu/internal.h can't be included there directly. Doing so
opens the door to include-hell due to various include-magic in
boot/compressed/misc.h.
Avoid that by moving xgetbv()/xsetbv() to a separate header file and
include it instead.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200907131613.12703-27-joro@8bytes.org
Force a page-fault on any further accesses to the GHCB page when they
shouldn't happen anymore. This will catch any bugs where a #VC exception
is raised even though none is expected anymore.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200907131613.12703-25-joro@8bytes.org
Install an exception handler for #VC exception that uses a GHCB. Also
add the infrastructure for handling different exit-codes by decoding
the instruction that caused the exception and error handling.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200907131613.12703-24-joro@8bytes.org
