binder_poll() passes the thread->wait waitqueue that
can be slept on for work. When a thread that uses
epoll explicitly exits using BINDER_THREAD_EXIT,
the waitqueue is freed, but it is never removed
from the corresponding epoll data structure. When
the process subsequently exits, the epoll cleanup
code tries to access the waitlist, which results in
a use-after-free.
Prevent this by using POLLFREE when the thread exits.
Signed-off-by: Martijn Coenen <maco@android.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Cc: stable <stable@vger.kernel.org> # 4.14
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
->dev_state can't be both MEI_DEV_RESETTING and MEI_DEV_POWER_DOWN at
the same time. && was clearing intended here.
Fixes: 8d52af6795 ("mei: speed up the power down flow")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The Elapsed Time Counter (ETC) registers are not buffered for reading.
If a 250ms tick occurs while data is being read out, the result can be
a combination of old and new values. This can occur at the byte level
(giving a time in the future) or the individual bit level (giving a
time in the past). We catch both these cases by reading until we get
two equal or consecutive values. After five unsuccessful attempts we
give up.
Signed-off-by: Thomas VanSelus <tvanselus@xes-inc.com>
Signed-off-by: Aaron Sierra <asierra@xes-inc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch leverages the fact that all DS1682 registers are unsigned to
merge two return paths into one. It also introduces val_le as used in
ds1682_store() to merge two endianness conversions into one.
Signed-off-by: Aaron Sierra <asierra@xes-inc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Resolved missing a blank line after declarations checkpatch
warnings. Issue found by checkpatch.
Signed-off-by: Tejas Upadhyay <tejas.upadhyay@softnautics.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
SoundWire bus needs to select the regmap support. So, add it
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pierre was MIPI chair for SoundWire spec and we could use his help in
code reviews, so add him as a reviewer.
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Below build failure was reported on UML,
ERROR: "devm_ioremap_resource" [drivers/slimbus/slim-qcom-ctrl.ko] undefined!
ERROR: "__ioread32_copy" [drivers/slimbus/slim-qcom-ctrl.ko] undefined!
ERROR: "__iowrite32_copy" [drivers/slimbus/slim-qcom-ctrl.ko] undefined!
ERROR: "devm_ioremap" [drivers/slimbus/slim-qcom-ctrl.ko] undefined!
This patch fixes it by making qcom slimbus depend on HAS_IOMEM, as
these are only defined when HAS_IOMEM is selected.
Reported-by: Thomas Meyer <thomas@m3y3r.de>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In case of error, the function devm_ioremap_resource() returns ERR_PTR()
and never returns NULL. The NULL test in the return value check should
be replaced with IS_ERR().
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add the missing unlock before return from function slim_msg_response()
in the error handling case.
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A spin lock is taken here so we should use GFP_ATOMIC.
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The functions slim_ack_txn and slim_alloc_txbuf are local to the
source and do not need to be in global scope, so make them static.
Cleans up sparse warnings:
symbol 'slim_ack_txn' was not declared. Should it be static?
symbol 'slim_alloc_txbuf' was not declared. Should it be static?
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently the check for too many retries fails because retries is actually
-1 when the retry loop terminates if no pbuf can be allocated because of
the post decrement on retries. Fix this by not comparing retries with zero
but instead check if it is negative.
Detected by CoverityScan, CID#1463143 ("Logically dead code") and
CID#1463144 ("Dereference after null check")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The pointer msg is checked to see if it is null at the start of
the function and jumps to the error exit label reterr that then
dereferences msg when it prints a dev_err error message. Avoid
this potential null pointer dereference by only printing the
error message if msg is not null.
Detected by CoverityScan, CID#1463141 ("Dereference after null check")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove all free-text license texts.
This is done on a quest to remove the 700+ different ways that files in
the kernel describe the GPL license text.
No copyright headers or other non-license-description text was removed.
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently the return status ret is being checked but it has not been
updated since the previous check on ret. It appears that assignment of
ret from return status of the call to sdw_cdns_enable_interrupt was
accidentally ommited. Fix this.
Detected by CoverityScan, CID#1463148 ("Logically dead code")
Fixes: 71bb8a1b05 ("soundwire: intel: Add Intel Master driver")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The buf[2] left shift by 24 bits is promoted to int (32 bit signed)
and then signed-extended to unsigned long long. Hence if the upper
bit to buf[2] is set then all the upper bits of addr end up as 1.
Fix this by casting it to u64 before shifting it. Also replace the
unsigned long long casts to u64 casts to match the same type of
addr.
Detected by CoverityScan, CID#1463147 ("Unintended sign extension")
Fixes: d52d7a1be0 ("soundwire: Add Slave status handling helpers")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Detailed description for this pull request:
1. Add support to notify USB connector for "ChromeOS Embedded Controller".
- extcon-usbc-cros-ec driver detects the EXTCON_USB and EXTCON_USB_HOST
connector type and then notify the state/properties to the consumer device.
2. Update the detection on probe time and clean-up code for "X-Power AXP288".
- Detect the state of connector after a couple of seconds after probe()
becasue extcon-axp288.c driver depends on other device driver like mux.
In order to guarantee the correct state, the extcon-axp288.c uses the
delayed_work.
- Set EXTCON_CHG_USB_SDP type as the safe default type if unknown connector
is attached because the data sheet of axp288 doesn't handle
the all exception cases.
- Remove unused code
3. Fix the minor issue of extcon driver
- Fix platform get_irq's error checking for extcon-adc-jack.
- Delete unneeded initialization for extcon-max8997/max77693.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=bVYG
-----END PGP SIGNATURE-----
Merge tag 'extcon-next-for-4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/extcon into char-misc-next
Chanwoo writes:
Update extcon for 4.16
Detailed description for this pull request:
1. Add support to notify USB connector for "ChromeOS Embedded Controller".
- extcon-usbc-cros-ec driver detects the EXTCON_USB and EXTCON_USB_HOST
connector type and then notify the state/properties to the consumer device.
2. Update the detection on probe time and clean-up code for "X-Power AXP288".
- Detect the state of connector after a couple of seconds after probe()
becasue extcon-axp288.c driver depends on other device driver like mux.
In order to guarantee the correct state, the extcon-axp288.c uses the
delayed_work.
- Set EXTCON_CHG_USB_SDP type as the safe default type if unknown connector
is attached because the data sheet of axp288 doesn't handle
the all exception cases.
- Remove unused code
3. Fix the minor issue of extcon driver
- Fix platform get_irq's error checking for extcon-adc-jack.
- Delete unneeded initialization for extcon-max8997/max77693.
According to the data sheets all the values not handled in the
switch-case are "reserved". Update the dev_warn message to reflect
this and set the cable-type to EXTCON_CHG_USB_SDP (so max 500mA
current draw) as safe default.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
The axp288 extcon code depends on other drivers to do things like mux the
data lines, enable/disable vbus based on the id-pin, etc.
Sometimes the BIOS has not set these things up correctly resulting in the
initial charger cable type detection giving a wrong result and we end up
not charging or charging at only 0.5A.
This commit starts a second charger-detection cycle a couple of seconds
after the first one finishes, giving the other drivers time to load and
do their thing.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
This is not used / set anywhere in the tree.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
platform_get_irq() can fail here and we must check its return value.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
i7300_idle.h is not being called by any source file and contains calls to
pci_get_bus_and_slot() that we are trying to deprecate. Remove unused file.
Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The current expression using the || operator is always true because
dev->dev_state cannot be equal to two different values at the same time.
Fix this by replacing the || with &&.
Detected by CoverityScan, CID#1463042 ("Constant expression result")
Fixes: 8d52af6795 ("mei: speed up the power down flow")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
>From the pci power documentation:
"The driver itself should not call pm_runtime_allow(), though. Instead,
it should let user space or some platform-specific code do that (user space
can do it via sysfs as stated above)..."
However, the S0ix residency cannot be reached without MEI device getting
into low power state. Hence, for mei devices that support D0i3, it's better
to make runtime power management mandatory and not rely on the system
integration such as udev rules.
This policy cannot be applied globally as some older platforms
were found to have broken power management.
Cc: <stable@vger.kernel.org> v4.13+
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Reviewed-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The previous patch addressed a warning but not the cause:
drivers/slimbus/qcom-ctrl.c: In function 'qcom_slim_probe':
drivers/slimbus/qcom-ctrl.c:584:9: error: passing argument 3 of 'dmam_alloc_coherent' from incompatible pointer type [-Werror=incompatible-pointer-types]
There are two things wrong here:
- The naming is very confusing, we now have a member named 'phys'
that doesn't refer to a phys_addr_t but a dma_addr_t. If we needed
a dma address, it should be named 'dma' to avoid confusion, and
to make it less likely that someone passes it into a function that
expects a physical address.
- The dma address is not used at all at this point. It may have been
designed to support DMA in the future, but today it doesn't, so
the only effect right now is to make transfers artificially slower
by using uncached memory instead of cached memory for a temporary
buffer.
This removes the unused structure member and instead changes the code
to call devm_kcalloc(), which matches the usage of the 'base' pointer
as an array of temporary buffers.
Fixes: db809859c8 ("slimbus: qcom: fix incompatible pointer warning")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull x86 fixes from Thomas Gleixner:
"A couple of fixlets for x86:
- Fix the ESPFIX double fault handling for 5-level pagetables
- Fix the commandline parsing for 'apic=' on 32bit systems and update
documentation
- Make zombie stack traces reliable
- Fix kexec with stack canary
- Fix the delivery mode for APICs which was missed when the x86
vector management was converted to single target delivery. Caused a
regression due to the broken hardware which ignores affinity
settings in lowest prio delivery mode.
- Unbreak modules when AMD memory encryption is enabled
- Remove an unused parameter of prepare_switch_to"
* 'x86/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/apic: Switch all APICs to Fixed delivery mode
x86/apic: Update the 'apic=' description of setting APIC driver
x86/apic: Avoid wrong warning when parsing 'apic=' in X86-32 case
x86-32: Fix kexec with stack canary (CONFIG_CC_STACKPROTECTOR)
x86: Remove unused parameter of prepare_switch_to
x86/stacktrace: Make zombie stack traces reliable
x86/mm: Unbreak modules that use the DMA API
x86/build: Make isoimage work on Debian
x86/espfix/64: Fix espfix double-fault handling on 5-level systems
Pull x86 page table isolation fixes from Thomas Gleixner:
"Four patches addressing the PTI fallout as discussed and debugged
yesterday:
- Remove stale and pointless TLB flush invocations from the hotplug
code
- Remove stale preempt_disable/enable from __native_flush_tlb()
- Plug the memory leak in the write_ldt() error path"
* 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/ldt: Make LDT pgtable free conditional
x86/ldt: Plug memory leak in error path
x86/mm: Remove preempt_disable/enable() from __native_flush_tlb()
x86/smpboot: Remove stale TLB flush invocations
Pull timer fixes from Thomas Gleixner:
"A pile of fixes for long standing issues with the timer wheel and the
NOHZ code:
- Prevent timer base confusion accross the nohz switch, which can
cause unlocked access and data corruption
- Reinitialize the stale base clock on cpu hotplug to prevent subtle
side effects including rollovers on 32bit
- Prevent an interrupt storm when the timer softirq is already
pending caused by tick_nohz_stop_sched_tick()
- Move the timer start tracepoint to a place where it actually makes
sense
- Add documentation to timerqueue functions as they caused confusion
several times now"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
timerqueue: Document return values of timerqueue_add/del()
timers: Invoke timer_start_debug() where it makes sense
nohz: Prevent a timer interrupt storm in tick_nohz_stop_sched_tick()
timers: Reinitialize per cpu bases on hotplug
timers: Use deferrable base independent of base::nohz_active
Pull smp fixlet from Thomas Gleixner:
"A trivial build warning fix for newer compilers"
* 'smp-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
cpu/hotplug: Move inline keyword at the beginning of declaration
Pull scheduler fixes from Thomas Gleixner:
"Three patches addressing the fallout of the CPU_ISOLATION changes
especially with NO_HZ_FULL plus documentation of boot parameter
dependency"
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/isolation: Document boot parameters dependency on CONFIG_CPU_ISOLATION=y
sched/isolation: Enable CONFIG_CPU_ISOLATION=y by default
sched/isolation: Make CONFIG_NO_HZ_FULL select CONFIG_CPU_ISOLATION
Pull perf fixes from Thomas Gleixner:
- plug a memory leak in the intel pmu init code
- clang fixes
- tooling fix to avoid including kernel headers
- a fix for jvmti to generate correct debug information for inlined
code
- replace backtick with a regular shell function
- fix the build in hardened environments
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel: Plug memory leak in intel_pmu_init()
x86/asm: Allow again using asm.h when building for the 'bpf' clang target
tools arch s390: Do not include header files from the kernel sources
perf jvmti: Generate correct debug information for inlined code
perf tools: Fix up build in hardened environments
perf tools: Use shell function for perl cflags retrieval
Pull irq fixes from Thomas Gleixner:
"A rather large update after the kaisered maintainer finally found time
to handle regression reports.
- The larger part addresses a regression caused by the x86 vector
management rework.
The reservation based model does not work reliably for MSI
interrupts, if they cannot be masked (yes, yet another hw
engineering trainwreck). The reason is that the reservation mode
assigns a dummy vector when the interrupt is allocated and switches
to a real vector when the interrupt is requested.
If the MSI entry cannot be masked then the initialization might
raise an interrupt before the interrupt is requested, which ends up
as spurious interrupt and causes device malfunction and worse. The
fix is to exclude MSI interrupts which do not support masking from
reservation mode and assign a real vector right away.
- Extend the extra lockdep class setup for nested interrupts with a
class for the recently added irq_desc::request_mutex so lockdep can
differeniate and does not emit false positive warnings.
- A ratelimit guard for the bad irq printout so in case a bad irq
comes back immediately the system does not drown in dmesg spam"
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
genirq/msi, x86/vector: Prevent reservation mode for non maskable MSI
genirq/irqdomain: Rename early argument of irq_domain_activate_irq()
x86/vector: Use IRQD_CAN_RESERVE flag
genirq: Introduce IRQD_CAN_RESERVE flag
genirq/msi: Handle reactivation only on success
gpio: brcmstb: Make really use of the new lockdep class
genirq: Guard handle_bad_irq log messages
kernel/irq: Extend lockdep class for request mutex
Pull objtool fixes from Thomas Gleixner:
"Three fixlets for objtool:
- Address two segfaults related to missing parameter and clang
objects
- Make it compile clean with clang"
* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool: Fix seg fault with clang-compiled objects
objtool: Fix seg fault caused by missing parameter
objtool: Fix Clang enum conversion warning
Here are six small fixes of some of the char/misc drivers that have been
sent in to resolve reported issues.
Nothing major, a binder use-after-free fix, some thunderbolt bugfixes, a
hyper-v bugfix, and an nvmem driver fix. All of these have been in
linux-next with no reported issues for a while.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWkjKDw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymkNACgmepGEvd9OJKji+rDj8ADo8lJ7BwAoLiCO22P
wwwpJ7gWnt8N2Red6xcO
=Jmx1
-----END PGP SIGNATURE-----
Merge tag 'char-misc-4.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc fixes from Greg KH:
"Here are six small fixes of some of the char/misc drivers that have
been sent in to resolve reported issues.
Nothing major, a binder use-after-free fix, some thunderbolt bugfixes,
a hyper-v bugfix, and an nvmem driver fix. All of these have been in
linux-next with no reported issues for a while"
* tag 'char-misc-4.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
nvmem: meson-mx-efuse: fix reading from an offset other than 0
binder: fix proc->files use-after-free
vmbus: unregister device_obj->channels_kset
thunderbolt: Mask ring interrupt properly when polling starts
MAINTAINERS: Add thunderbolt.rst to the Thunderbolt driver entry
thunderbolt: Make pathname to force_power shorter
Here are 2 driver core fixes for 4.15-rc6, resolving some reported
issues.
The first is a cacheinfo fix for DT based systems to resolve a reported
issue that has been around for a while, and the other is to resolve a
regression in the kobject uevent code that showed up in 4.15-rc1.
Both have been in linux-next for a while with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWkjLCA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yk6GACbBZ/EqSrd5w6//4okaHJLPAi8ligAoNfcBqrH
TPQycbostUcOBHUvvoUB
=MaZG
-----END PGP SIGNATURE-----
Merge tag 'driver-core-4.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core fixes from Greg KH:
"Here are two driver core fixes for 4.15-rc6, resolving some reported
issues.
The first is a cacheinfo fix for DT based systems to resolve a
reported issue that has been around for a while, and the other is to
resolve a regression in the kobject uevent code that showed up in
4.15-rc1.
Both have been in linux-next for a while with no reported issues"
* tag 'driver-core-4.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
kobject: fix suppressing modalias in uevents delivered over netlink
drivers: base: cacheinfo: fix cache type for non-architected system cache
Here are 3 staging driver fixes for 4.15-rc6
The first resolves a bug in the lustre driver that came about due to a
broken cleanup patch, due to crazy list usage in that codebase. The
remaining two are ion driver fixes, finally getting the CMA interaction
to work properly, resolving two regressions in that area of the code.
All have been in linux-next with no reported issues for a while.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWkjMBA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykc6QCcCbSrA4YMyeAZ+pI2ffpMkxhRaYoAoLRC/6co
j+OHv4J4qpH7uf6rRb5Z
=TNOV
-----END PGP SIGNATURE-----
Merge tag 'staging-4.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging fixes from Greg KH:
"Here are three staging driver fixes for 4.15-rc6
The first resolves a bug in the lustre driver that came about due to a
broken cleanup patch, due to crazy list usage in that codebase.
The remaining two are ion driver fixes, finally getting the CMA
interaction to work properly, resolving two regressions in that area
of the code.
All have been in linux-next with no reported issues for a while"
* tag 'staging-4.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: android: ion: Fix dma direction for dma_sync_sg_for_cpu/device
staging: ion: Fix ion_cma_heap allocations
staging: lustre: lnet: Fix recent breakage from list_for_each conversion
Here is a single tty fix for a reported issue that you wrote the patch
for :)
It's been in linux-next for a week or so with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWkjMww8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymoDwCgjdn/W0mM1TvfsHaHpKXxTaIeAt0AoKs2uvG2
ys1xuUzwOS8ZPzVtuuqm
=pnhR
-----END PGP SIGNATURE-----
Merge tag 'tty-4.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull TTY fix from Greg KH:
"Here is a single tty fix for a reported issue that you wrote the patch
for :)
It's been in linux-next for a week or so with no reported issues"
* tag 'tty-4.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
n_tty: fix EXTPROC vs ICANON interaction with TIOCINQ (aka FIONREAD)
Here are a number of small USB and PHY driver fixes for 4.15-rc6.
Nothing major, but there are a number of regression fixes in here that
resolve issues that have been reported a bunch. There are also the
usual xhci fixes as well as a number of new usb serial device ids.
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWkjNXg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykePwCgmTX2oVnGPIagWmm3dsRqr9Fk/uoAoJxGIS00
o/9JAe9k7KvbaurQLjl2
=wAfU
-----END PGP SIGNATURE-----
Merge tag 'usb-4.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB/PHY fixes from Greg KH:
"Here are a number of small USB and PHY driver fixes for 4.15-rc6.
Nothing major, but there are a number of regression fixes in here that
resolve issues that have been reported a bunch. There are also the
usual xhci fixes as well as a number of new usb serial device ids.
All of these have been in linux-next for a while with no reported
issues"
* tag 'usb-4.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: xhci: Add XHCI_TRUST_TX_LENGTH for Renesas uPD720201
xhci: Fix use-after-free in xhci debugfs
xhci: Fix xhci debugfs NULL pointer dereference in resume from hibernate
USB: serial: ftdi_sio: add id for Airbus DS P8GR
usb: Add device quirk for Logitech HD Pro Webcam C925e
usb: add RESET_RESUME for ELSA MicroLink 56K
usbip: fix usbip bind writing random string after command in match_busid
usbip: stub_rx: fix static checker warning on unnecessary checks
usbip: prevent leaking socket pointer address in messages
usbip: stub: stop printing kernel pointer addresses in messages
usbip: vhci: stop printing kernel pointer addresses in messages
USB: Fix off by one in type-specific length check of BOS SSP capability
USB: serial: option: adding support for YUGA CLM920-NC5
phy: rcar-gen3-usb2: select USB_COMMON
phy: rockchip-typec: add pm_runtime_disable in err case
phy: cpcap-usb: Fix platform_get_irq_byname's error checking.
phy: tegra: fix device-tree node lookups
USB: serial: qcserial: add Sierra Wireless EM7565
USB: serial: option: add support for Telit ME910 PID 0x1101
USB: chipidea: msm: fix ulpi-node lookup
The blackfin architecture has seen no maintainer action of any kind since
April 2015. No new code, no pull requests, no acks to patches, no response
to mails, nothing.
The web site has an expired certificate (expiration Sep 2017, issued in
2013), the mailing list sees no answers either, with one exception:
https://sourceforge.net/p/adi-buildroot/mailman/adi-buildroot-devel/
>
> Steven is no longer working on this for ADI. Acked by me if this works. Thanks.
>
> Best regards,
> Aaron Wu
> Analog Devices Inc.
But, Aaron doesn't seem to respond to queries either.
Signed-off-by: Adam Borowski <kilobyte@angband.pl>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull sparc bugfix from David Miller.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
sparc64: repair calling incorrect hweight function from stubs
One of the pointer passed to dmam_alloc_coherent seems to be
phys_addr_t * instead of dma_addr_t *. This address will be
used by dma apis, so change this to proper type.
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andy prefers to be paranoid about the pagetable free in the error path of
write_ldt(). Make it conditional and warn whenever the installment of a
secondary LDT fails.
Requested-by: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
