Convert the Samsung S3C24xx/S3C64xx/S5PV210/Exynos SoC I2C Controller
bindings to DT schema format.
The conversion includes also changes/fixes to the bindings, matching the
real hardware and existing Linux driver:
1. Do not require interrupts on samsung,exynos5-sata-phy-i2c, because
there is no such.
2. Do not allow gpios on samsung,exynos5-sata-phy-i2c, because they are
hard-wired just like for HDMI phy.
3. Do not require samsung,i2c-sda-delay and use default of 0.
4. Require clock, which was always required but missing in bindings.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220131172713.208976-1-krzysztof.kozlowski@canonical.com
Running with POSIXLY_CORRECT=1 in the environment the scripts/dtc build
fails, because pkg-config doesn't output anything when the flags come
after the arguments.
Fixes: 067c650c45 ("dtc: Use pkg-config to locate libyaml")
Signed-off-by: Thomas Bracht Laumann Jespersen <t@laumann.xyz>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220131112028.7907-1-t@laumann.xyz
In order to make the 'mboxes' property in the TI remoteproc examples
parseable, mailbox provider nodes are needed. Normally, the examples
have a __fixup__ node which can be used for determining each
phandle+arg entry. However, for this binding the arg cells contain a
phandle, and the __fixups__ information can't be used.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220119181053.3846613-1-robh@kernel.org
It is preferred to define all properties in the main schema and leave
if/then/else schemas to just be further constraints on properties.
Rework the schema to use be more specific for each cell. Previously,
multiple entries of 3 cells each was allowed.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220119174407.3810088-1-robh@kernel.org
In order to determine the number of interrupt cells in examples, the
examples will require all 'interrupts' properties to use the same number
of cells or have explicit interrupt provider node(s). As the former is
simpler, update the Ingenic example to use 2 interrupt cells everywhere.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220119174349.3809513-1-robh@kernel.org
The 'phandle-array' type is a bit ambiguous. It can be either just an
array of phandles or an array of phandles plus args. Many schemas for
phandle-array properties aren't clear in the schema which case applies
though the description usually describes it.
The array of phandles case boils down to needing:
items:
maxItems: 1
The phandle plus args cases should typically take this form:
items:
- items:
- description: A phandle
- description: 1st arg cell
- description: 2nd arg cell
With this change, some examples need updating so that the bracketing of
property values matches the schema.
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Vinod Koul <vkoul@kernel.org>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Georgi Djakov <djakov@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de>
Link: https://lore.kernel.org/r/20220119015038.2433585-1-robh@kernel.org
Pull more perf tools updates from Arnaldo Carvalho de Melo:
- Fix printing 'phys_addr' in 'perf script'.
- Fix failure to add events with 'perf probe' in ppc64 due to not
removing leading dot (ppc64 ABIv1).
- Fix cpu_map__item() python binding building.
- Support event alias in form foo-bar-baz, add pmu-events and
parse-event tests for it.
- No need to setup affinities when starting a workload or attaching to
a pid.
- Use path__join() to compose a path instead of ad-hoc snprintf()
equivalent.
- Override attr->sample_period for non-libpfm4 events.
- Use libperf cpumap APIs instead of accessing the internal state
directly.
- Sync x86 arch prctl headers and files changed by the new
set_mempolicy_home_node syscall with the kernel sources.
- Remove duplicate include in cpumap.h.
- Remove redundant err variable.
* tag 'perf-tools-for-v5.17-2022-01-22' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
perf tools: Remove redundant err variable
perf test: Add parse-events test for aliases with hyphens
perf test: Add pmu-events test for aliases with hyphens
perf parse-events: Support event alias in form foo-bar-baz
perf evsel: Override attr->sample_period for non-libpfm4 events
perf cpumap: Remove duplicate include in cpumap.h
perf cpumap: Migrate to libperf cpumap api
perf python: Fix cpu_map__item() building
perf script: Fix printing 'phys_addr' failure issue
tools headers UAPI: Sync files changed by new set_mempolicy_home_node syscall
tools headers UAPI: Sync x86 arch prctl headers with the kernel sources
perf machine: Use path__join() to compose a path instead of snprintf(dir, '/', filename)
perf evlist: No need to setup affinities when disabling events for pid targets
perf evlist: No need to setup affinities when enabling events for pid targets
perf stat: No need to setup affinities when starting a workload
perf affinity: Allow passing a NULL arg to affinity__cleanup()
perf probe: Fix ppc64 'perf probe add events failed' case
Pull ftrace fix from Steven Rostedt:
"Fix s390 breakage from sorting mcount tables.
The latest merge of the tracing tree sorts the mcount table at build
time. But s390 appears to do things differently (like always) and
replaces the sorted table back to the original unsorted one. As the
ftrace algorithm depends on it being sorted, bad things happen when it
is not, and s390 experienced those bad things.
Add a new config to tell the boot if the mcount table is sorted or
not, and allow s390 to opt out of it"
* tag 'trace-v5.17-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
ftrace: Fix assuming build time sort works for s390
To speed up the boot process, as mcount_loc needs to be sorted for ftrace
to work properly, sorting it at build time is more efficient than boot up
and can save milliseconds of time. Unfortunately, this change broke s390
as it will modify the mcount_loc location after the sorting takes place
and will put back the unsorted locations. Since the sorting is skipped at
boot up if it is believed that it was sorted at run time, ftrace can crash
as its algorithms are dependent on the list being sorted.
Add a new config BUILDTIME_MCOUNT_SORT that is set when
BUILDTIME_TABLE_SORT but not if S390 is set. Use this config to determine
if sorting should take place at boot up.
Link: https://lore.kernel.org/all/yt9dee51ctfn.fsf@linux.ibm.com/
Fixes: 72b3942a17 ("scripts: ftrace - move the sort-processing in ftrace_init")
Reported-by: Sven Schnelle <svens@linux.ibm.com>
Tested-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Pull Kbuild fixes from Masahiro Yamada:
- Bring include/uapi/linux/nfc.h into the UAPI compile-test coverage
- Revert the workaround of CONFIG_CC_IMPLICIT_FALLTHROUGH
- Fix build errors in certs/Makefile
* tag 'kbuild-fixes-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
certs: Fix build error when CONFIG_MODULE_SIG_KEY is empty
certs: Fix build error when CONFIG_MODULE_SIG_KEY is PKCS#11 URI
Revert "Makefile: Do not quote value for CONFIG_CC_IMPLICIT_FALLTHROUGH"
usr/include/Makefile: add linux/nfc.h to the compile-test coverage
Pull bitmap updates from Yury Norov:
- introduce for_each_set_bitrange()
- use find_first_*_bit() instead of find_next_*_bit() where possible
- unify for_each_bit() macros
* tag 'bitmap-5.17-rc1' of git://github.com/norov/linux:
vsprintf: rework bitmap_list_string
lib: bitmap: add performance test for bitmap_print_to_pagebuf
bitmap: unify find_bit operations
mm/percpu: micro-optimize pcpu_is_populated()
Replace for_each_*_bit_from() with for_each_*_bit() where appropriate
find: micro-optimize for_each_{set,clear}_bit()
include/linux: move for_each_bit() macros from bitops.h to find.h
cpumask: replace cpumask_next_* with cpumask_first_* where appropriate
tools: sync tools/bitmap with mother linux
all: replace find_next{,_zero}_bit with find_first{,_zero}_bit where appropriate
cpumask: use find_first_and_bit()
lib: add find_first_and_bit()
arch: remove GENERIC_FIND_FIRST_BIT entirely
include: move find.h from asm_generic to linux
bitops: move find_bit_*_le functions from le.h to find.h
bitops: protect find_first_{,zero}_bit properly
Perf script was failed to print the phys_addr for SPE profiling.
One 'dummy' event is added by SPE profiling but it doesn't have PHYS_ADDR
attribute set, perf script then exits with error.
Now referring to 'addr', use evsel__do_check_stype() to check the type.
Before:
# perf record -e arm_spe_0/branch_filter=0,ts_enable=1,pa_enable=1,load_filter=1,jitter=0,\
store_filter=0,min_latency=0,event_filter=2/ -p 4064384 -- sleep 3
# perf script -F pid,tid,addr,phys_addr
Samples for 'dummy:u' event do not have PHYS_ADDR attribute set. Cannot print 'phys_addr' field.
After:
# perf record -e arm_spe_0/branch_filter=0,ts_enable=1,pa_enable=1,load_filter=1,jitter=0,\
store_filter=0,min_latency=0,event_filter=2/ -p 4064384 -- sleep 3
# perf script -F pid,tid,addr,phys_addr
4064384/4064384 ffff802f921be0d0 2f921be0d0
4064384/4064384 ffff802f921be0d0 2f921be0d0
Reviewed-by: German Gomez <german.gomez@arm.com>
Signed-off-by: Yao Jin <jinyao5@huawei.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Hanjun Guo <guohanjun@huawei.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20220121065954.2121900-1-liwei391@huawei.com
Signed-off-by: Wei Li <liwei391@huawei.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When CONFIG_MODULE_SIG_KEY is PKCS#11 URL (pkcs11:*), signing_key.x509
fails to build:
certs/Makefile:77: *** target pattern contains no '%'. Stop.
Due to the typo, $(X509_DEP) contains a colon.
Fix it.
Fixes: b8c96a6b46 ("certs: simplify $(srctree)/ handling and remove config_filename macro")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
This reverts commit cd8c917a56.
Commit 129ab0d2d9 ("kbuild: do not quote string values in
include/config/auto.conf") provided the final solution.
Now reverting the temporary workaround.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
As linux/nfc.h userspace compilation was finally fixed by commits
79b69a8370 ("nfc: uapi: use kernel size_t to fix user-space builds")
and 7175f02c4e ("uapi: fix linux/nfc.h userspace compilation errors"),
there is no need to keep the compile-test exception for it in
usr/include/Makefile.
Signed-off-by: Dmitry V. Levin <ldv@altlinux.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Merge yet more updates from Andrew Morton:
"This is the post-linux-next queue. Material which was based on or
dependent upon material which was in -next.
69 patches.
Subsystems affected by this patch series: mm (migration and zsmalloc),
sysctl, proc, and lib"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (69 commits)
mm: hide the FRONTSWAP Kconfig symbol
frontswap: remove support for multiple ops
mm: mark swap_lock and swap_active_head static
frontswap: simplify frontswap_register_ops
frontswap: remove frontswap_test
mm: simplify try_to_unuse
frontswap: remove the frontswap exports
frontswap: simplify frontswap_init
frontswap: remove frontswap_curr_pages
frontswap: remove frontswap_shrink
frontswap: remove frontswap_tmem_exclusive_gets
frontswap: remove frontswap_writethrough
mm: remove cleancache
lib/stackdepot: always do filter_irq_stacks() in stack_depot_save()
lib/stackdepot: allow optional init and stack_table allocation by kvmalloc()
proc: remove PDE_DATA() completely
fs: proc: store PDE()->data into inode->i_private
zsmalloc: replace get_cpu_var with local_lock
zsmalloc: replace per zpage lock with pool->migrate_lock
locking/rwlocks: introduce write_lock_nested
...
Pull cifs fixes from Steve French:
- multichannel fixes, addressing additional reconnect and DFS scenarios
- reenabling fscache support (indexing rewrite, metadata caching e.g.)
- send additional version information during NTLMSSP negotiate to
improve debugging
- fix for a mount race
- DFS fixes
- fix for a memory leak for stable
* tag '5.17-rc-part2-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: update internal module number
smb3: send NTLMSSP version information
cifs: Support fscache indexing rewrite
cifs: cifs_ses_mark_for_reconnect should also update reconnect bits
cifs: update tcpStatus during negotiate and sess setup
cifs: make status checks in version independent callers
cifs: remove repeated state change in dfs tree connect
cifs: fix the cifs_reconnect path for DFS
cifs: remove unused variable ses_selected
cifs: protect all accesses to chan_* with chan_lock
cifs: fix the connection state transitions with multichannel
cifs: check reconnects for channels of active tcons too
smb3: add new defines from protocol specification
cifs: serialize all mount attempts
cifs: quirk for STATUS_OBJECT_NAME_INVALID returned for non-ASCII dfs refs
cifs: alloc_path_with_tree_prefix: do not append sep. if the path is empty
cifs: clean up an inconsistent indenting
cifs: free ntlmsspblob allocated in negotiate
Pull xfs fixes from Darrick Wong:
"One of the patches removes some dead code from xfs_ioctl32.h and the
other fixes broken workqueue flushing in the inode garbage collector.
- Minor cleanup of ioctl32 cruft
- Clean up open coded inodegc workqueue function calls"
* tag 'xfs-5.17-merge-7' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: flush inodegc workqueue tasks before cancel
xfs: remove unused xfs_ioctl32.h declarations
Pull more fscache updates from David Howells:
"A set of fixes and minor updates for the fscache rewrite:
- Fix mishandling of volume collisions (the wait condition is
inverted and so it was only waiting if the volume collision was
already resolved).
- Fix miscalculation of whether there's space available in
cachefiles.
- Make sure a default cache name is set on a cache if the user hasn't
set one by the time they bind the cache.
- Adjust the way the backing inode is presented in tracepoints, add a
tracepoint for mkdir and trace directory lookup.
- Add a tracepoint for failure to set the active file mark.
- Add an explanation of the checks made on the backing filesystem.
- Check that the backing filesystem supports tmpfile.
- Document how the page-release cancellation of the read-skip
optimisation works.
And I've included a change for netfslib:
- Make ops->init_rreq() optional"
* tag 'fscache-fixes-20220121' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
netfs: Make ops->init_rreq() optional
fscache: Add a comment explaining how page-release optimisation works
cachefiles: Check that the backing filesystem supports tmpfiles
cachefiles: Explain checks in a comment
cachefiles: Trace active-mark failure
cachefiles: Make some tracepoint adjustments
cachefiles: set default tag name if it's unspecified
cachefiles: Calculate the blockshift in terms of bytes, not pages
fscache: Fix the volume collision wait condition
Pull more folio updates from Matthew Wilcox:
"Three small folio patches.
One bug fix, one patch pulled forward from the patches destined for
5.18 and then a patch to make use of that functionality"
* tag 'folio-5.17a' of git://git.infradead.org/users/willy/pagecache:
filemap: Use folio_put_refs() in filemap_free_folio()
mm: Add folio_put_refs()
pagevec: Initialise folio_batch->percpu_pvec_drained
Pull more SCSI updates from James Bottomley:
"This series is all the stragglers that didn't quite make the first
merge window pull. It's mostly minor updates and bug fixes of merge
window code"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: nsp_cs: Check of ioremap return value
scsi: ufs: ufs-mediatek: Fix error checking in ufs_mtk_init_va09_pwr_ctrl()
scsi: ufs: Modify Tactive time setting conditions
scsi: efct: Remove useless DMA-32 fallback configuration
scsi: message: fusion: mptctl: Use dma_alloc_coherent()
scsi: message: fusion: mptsas: Use dma_alloc_coherent()
scsi: message: fusion: Use dma_alloc_coherent() in mptsas_exp_repmanufacture_info()
scsi: message: fusion: mptbase: Use dma_alloc_coherent()
scsi: message: fusion: Use dma_alloc_coherent() in mpt_alloc_fw_memory()
scsi: message: fusion: Remove usage of the deprecated "pci-dma-compat.h" API
scsi: megaraid: Avoid mismatched storage type sizes
scsi: hisi_sas: Remove unused variable and check in hisi_sas_send_ata_reset_each_phy()
scsi: aic79xx: Remove redundant error variable
scsi: pm80xx: Port reset timeout error handling correction
scsi: mpi3mr: Fix formatting problems in some kernel-doc comments
scsi: mpi3mr: Fix some spelling mistakes
scsi: mpt3sas: Update persistent trigger pages from sysfs interface
scsi: core: Fix scsi_mode_select() interface
scsi: aacraid: Fix spelling of "its"
scsi: qedf: Fix potential dereference of NULL pointer
Pull ATA fix from Damien Le Moal:
"A single patch to fix a compilation error in the pata_octeon_cf driver
(mips architecture), from me"
* tag 'ata-5.17-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
ata: pata_octeon_cf: fix call to trace_ata_bmdma_stop()
Pull more thermal control updates from Rafael Wysocki:
"Add device IDs for Raptor Lake to the int340x thermal control driver
(Srinivas Pandruvada)"
* tag 'thermal-5.17-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal: int340x: Add Raptor Lake PCI device id
thermal: int340x: Support Raptor Lake
Pull extra ACPI updates from Rafael Wysocki:
"These fix and clean up the ACPI CPPC driver on top of the recent
changes in it merged previously and add some new device IDs to the
ACPI DPTF driver.
Specifics:
- Fix a recently introduced endianness-related issue in the ACPI CPPC
library and clean it up on top of that (Rafael Wysocki)
- Add new device IDs for the Raptor Lake SoC to the ACPI DPTF driver
(Srinivas Pandruvada)"
* tag 'acpi-5.17-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: DPTF: Support Raptor Lake
ACPI: CPPC: Drop redundant local variable from cpc_read()
ACPI: CPPC: Fix up I/O port access in cpc_read()
Pull devicetree fixes and cleanups from Rob Herring:
- Fix a regression when probing a child device reusing the parent
device's DT node pointer
- Refactor of_parse_phandle*() variants to static inlines
- Drop Enric Balletbo i Serra as a maintainer
- Fix DT schemas with arrays incorrectly encoded as a matrix
- Drop unneeded pinctrl properties from schemas
- Add SPI peripheral schema to SPI based displays
- Clean-up several schema examples
- Clean-up trivial-devices.yaml comments
- Add missing, in use vendor prefixes: Wingtech, Thundercomm, Huawei,
F(x)tec, 8devices
* tag 'devicetree-fixes-for-5.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
dt-bindings: google,cros-ec: drop Enric Balletbo i Serra from maintainers
dt-bindings: display: bridge: drop Enric Balletbo i Serra from maintainers
of: Check 'of_node_reused' flag on of_match_device()
of: property: define of_property_read_u{8,16,32,64}_array() unconditionally
of: base: make small of_parse_phandle() variants static inline
dt-bindings: mfd: cirrus,madera: Fix 'interrupts' in example
dt-bindings: Fix array schemas encoded as matrices
dt-bindings: Drop unnecessary pinctrl properties
dt-bindings: rtc: st,stm32-rtc: Make each example a separate entry
dt-bindings: mmc: arm,pl18x: Make each example a separate entry
dt-bindings: display: Add SPI peripheral schema to SPI based displays
scripts/dtc: dtx_diff: remove broken example from help text
dt-bindings: trivial-devices: fix double spaces in comments
dt-bindings: trivial-devices: fix swapped comments
dt-bindings: vendor-prefixes: add Wingtech
dt-bindings: vendor-prefixes: add Thundercomm
dt-bindings: vendor-prefixes: add Huawei
dt-bindings: vendor-prefixes: add F(x)tec
dt-bindings: vendor-prefixes: add 8devices
dt-bindings: power: reset: gpio-restart: Correct default priority
Pull more kvm updates from Paolo Bonzini:
"Generic:
- selftest compilation fix for non-x86
- KVM: avoid warning on s390 in mark_page_dirty
x86:
- fix page write-protection bug and improve comments
- use binary search to lookup the PMU event filter, add test
- enable_pmu module parameter support for Intel CPUs
- switch blocked_vcpu_on_cpu_lock to raw spinlock
- cleanups of blocked vCPU logic
- partially allow KVM_SET_CPUID{,2} after KVM_RUN (5.16 regression)
- various small fixes"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (46 commits)
docs: kvm: fix WARNINGs from api.rst
selftests: kvm/x86: Fix the warning in lib/x86_64/processor.c
selftests: kvm/x86: Fix the warning in pmu_event_filter_test.c
kvm: selftests: Do not indent with spaces
kvm: selftests: sync uapi/linux/kvm.h with Linux header
selftests: kvm: add amx_test to .gitignore
KVM: SVM: Nullify vcpu_(un)blocking() hooks if AVIC is disabled
KVM: SVM: Move svm_hardware_setup() and its helpers below svm_x86_ops
KVM: SVM: Drop AVIC's intermediate avic_set_running() helper
KVM: VMX: Don't do full kick when handling posted interrupt wakeup
KVM: VMX: Fold fallback path into triggering posted IRQ helper
KVM: VMX: Pass desired vector instead of bool for triggering posted IRQ
KVM: VMX: Don't do full kick when triggering posted interrupt "fails"
KVM: SVM: Skip AVIC and IRTE updates when loading blocking vCPU
KVM: SVM: Use kvm_vcpu_is_blocking() in AVIC load to handle preemption
KVM: SVM: Remove unnecessary APICv/AVIC update in vCPU unblocking path
KVM: SVM: Don't bother checking for "running" AVIC when kicking for IPIs
KVM: SVM: Signal AVIC doorbell iff vCPU is in guest mode
KVM: x86: Remove defunct pre_block/post_block kvm_x86_ops hooks
KVM: x86: Unexport LAPIC's switch_to_{hv,sw}_timer() helpers
...
