Rename CamelCase function name and local variables.
Remove unnecessary debugging messages.
Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rename CamelCase function name and local variables.
Remove unnecessary debugging messages and local variables.
Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch removes redundant goto or break statements in hfa384x_usb.c as found by checkpatch.pl
Signed-off-by: Ilja Sidoroff <ilja.sidoroff@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
remove a typedef that is not even really used.
Signed-off-by: Martin Kepplinger <martink@posteo.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Follow the checkpatch.pl "LINE_SPACING" indication:
1. Insert a blank line after function declaration.
2. Remove multiple blank lines.
Signed-off-by: SeeChen Ng <seechen81@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
rate control algorithm pid was removed from wireless tree
The device defaults to algorithm 'minstrel_ht'
There has been no problems using this algorithm.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
pDevice is never NULL when this function is called remove the check.
This fixes smatch warning
drivers/staging/vt6655/device_main.c:1023 device_free_info() warn: variable dereferenced
before check 'pDevice' (see line 1021)
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: kbuild@01.org
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There are two checks for CONFIG_B4860G100 in this driver. But there's no
Kconfig symbol B4860G100. These checks will always evaluate to false.
Remove them and the code they hide.
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Blank lines between a function call and its return status check were
removed.
* Double blank lines were removed.
* Blank lines were added and removed as to silence checkpatch.pl --strict
Suggested-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Eli Billauer <eli.billauer@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Trivial comments removed, and one comment clarified
Suggested-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Eli Billauer <eli.billauer@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rather than checking the wait condition, the return value of
wait_event_interruptible() and wait_event_interruptible_timeout() is
used.
Suggested-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Eli Billauer <eli.billauer@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
"rc" is often used to hold the return value of a function call. This patch
removes unnecessary assignments to this variable, and makes a few related
execution flow improvements.
Suggested-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Eli Billauer <eli.billauer@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The -EAGAIN status is passed through an "rc" variable instead of a less
common flow.
Suggested-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Eli Billauer <eli.billauer@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
xilly_scan_idt() now returns an error status code, rather than being a void
function and hint the status through an entry in a data structure.
Suggested-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Eli Billauer <eli.billauer@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Responding to an interrupt while handling the "release" method can't end
well anyhow. In practical cases, this can force the user to wait up to
one second while flushing remaining data is attempted (a timeout on the flush
mechanism limits the time for flushing).
Suggested-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Eli Billauer <eli.billauer@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Replace devm_kzalloc where it applies.
Suggested-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Eli Billauer <eli.billauer@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For aesthetics, move the analog input (*insn_read) function so it
is not located in the middle of the async command support functions.
Also, rename it for consistency.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The analog input FIFO is reset at the start of every (*insn_read) and (*do_cmd)
operation. It's also reset for the analog input (*cancel).
There's no reason to reset the FIFO if an (*insn_read) times out or after
all the samples have been acquired.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Introduce a helper function to program the AMCC master write address and
transfer count registers to setup a DMA transaction.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Introduce a helper function to program the AMCC master control/status
register to enable/disable dma.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Introduce a helper function to program the AMCC interrupt control/
status register to enable/disable interrupts.
Fix the analog input (*cancel). The analog input async command support
is the only interrupt generator. The (*cancel) should always disable
interrupts.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rename this CamelCase member of the private data.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rename this CamelCase member of the private data.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rename this CamelCase member of the private data.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently the analog input range and aref are set in setup_channel_list().
This works for the (*insn_read) but the (*do_cmd) has a problem.
In (*do_cmd) the ai control register is reset to 0 before the function works
out the bits needed to control the acquisition. This happens after the
setup_channel_list() call so the range is reset to bipolar and the aref to
single-ended.
Introduce a helper function, pci9118_ai_set_range_aref(), to handle the
programming of the range and aref bits. This function first clears the
cached value of the ai control register in the private data then sets the
appropriate bits. The (*insn_read) and (*do_cmd) can then set the other
bits needed to control the acquisition.
Then setup_channel_list() just needs to program the chanlist scan data.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The analog input (*insn_read) in this driver is done as a software-triggered,
polled operation. The PCI9118_AI_CTRL_INT bit in the control register, which
is actually set in setup_channel_list(), should not be set.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
