f15d635842
15460 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Linus Torvalds
|
a13f950ef1 |
Merge branch 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull clocksource updates from Ingo Molnar: "Misc clocksource/clockevent driver updates that came in a bit late but are ready for v5.2" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: misc: atmel_tclib: Do not probe already used TCBs clocksource/drivers/timer-atmel-tcb: Convert tc_clksrc_suspend|resume() to static clocksource/drivers/tcb_clksrc: Rename the file for consistency clocksource/drivers/timer-atmel-pit: Rework Kconfig option clocksource/drivers/tcb_clksrc: Move Kconfig option ARM: at91: Implement clocksource selection clocksource/drivers/tcb_clksrc: Use tcb as sched_clock clocksource/drivers/tcb_clksrc: Stop depending on atmel_tclib ARM: at91: move SoC specific definitions to SoC folder clocksource/drivers/timer-milbeaut: Cleanup common register accesses clocksource/drivers/timer-milbeaut: Add shutdown function clocksource/drivers/timer-milbeaut: Fix to enable one-shot timer clocksource/drivers/tegra: Rework for compensation of suspend time clocksource/drivers/sp804: Add COMPILE_TEST to CONFIG_ARM_TIMER_SP804 clocksource/drivers/sun4i: Add a compatible for suniv dt-bindings: timer: Add Allwinner suniv timer |
||
|
Linus Torvalds
|
d9351ea14d |
Merge branch 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull IRQ chip updates from Ingo Molnar:
"A late irqchips update:
- New TI INTR/INTA set of drivers
- Rewrite of the stm32mp1-exti driver as a platform driver
- Update the IOMMU MSI mapping API to be RT friendly
- A number of cleanups and other low impact fixes"
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (34 commits)
iommu/dma-iommu: Remove iommu_dma_map_msi_msg()
irqchip/gic-v3-mbi: Don't map the MSI page in mbi_compose_m{b, s}i_msg()
irqchip/ls-scfg-msi: Don't map the MSI page in ls_scfg_msi_compose_msg()
irqchip/gic-v3-its: Don't map the MSI page in its_irq_compose_msi_msg()
irqchip/gicv2m: Don't map the MSI page in gicv2m_compose_msi_msg()
iommu/dma-iommu: Split iommu_dma_map_msi_msg() in two parts
genirq/msi: Add a new field in msi_desc to store an IOMMU cookie
arm64: arch_k3: Enable interrupt controller drivers
irqchip/ti-sci-inta: Add msi domain support
soc: ti: Add MSI domain bus support for Interrupt Aggregator
irqchip/ti-sci-inta: Add support for Interrupt Aggregator driver
dt-bindings: irqchip: Introduce TISCI Interrupt Aggregator bindings
irqchip/ti-sci-intr: Add support for Interrupt Router driver
dt-bindings: irqchip: Introduce TISCI Interrupt router bindings
gpio: thunderx: Use the default parent apis for {request,release}_resources
genirq: Introduce irq_chip_{request,release}_resource_parent() apis
firmware: ti_sci: Add helper apis to manage resources
firmware: ti_sci: Add RM mapping table for am654
firmware: ti_sci: Add support for IRQ management
firmware: ti_sci: Add support for RM core ops
...
|
||
|
Linus Torvalds
|
4c4a5c99af |
ARM: SoC: late updates
This is some material that we picked up into our tree late. Most of it are smaller fixes and additions, some defconfig updates due to recent development, etc. Code-wise the largest portion is a series of PM updates for the at91 platform, and those have been in linux-next a while through the at91 tree before we picked them up. -----BEGIN PGP SIGNATURE----- iQJDBAABCAAtFiEElf+HevZ4QCAJmMQ+jBrnPN6EHHcFAlzgimIPHG9sb2ZAbGl4 b20ubmV0AAoJEIwa5zzehBx3ExIP/R6c8wZtvvpf7tuyJudQbTbN/C4P4ZJqGNOc aJ1jzax5PGQdaA60wHR9SoO3GURRRvg4FcqUsbn7m13Lo6qjbVEOHJSRou9gTUSf Fl/6b/WqsF8AoGCM108GhiZyq2HGW1iG6ypFhZdb5UGLLnMZIxPkE0aJ31uR0NQi AbYF4YB033PIWqsaCIe+uIyYwaw2Q4LJuxvBvr11BRrp4WfPqyfkJWqAS+5KmMNN EuEoEA5GfJaBOE0HyIlbs9O9vLdAatroTHC8x1IuyN9+tWzx/tnbNovcFu7S1cl3 rV5inGF6uUxMGLtptWjQ3Z5rZFG1XcmQKDNF5UgVgdVutHCU/igYSsrEP3QVMwEf OFWRT/fwPUMSreMQ49li0ruFaR3q6kWl7SWGzBGUhBQZ29oK8BmNdsZA9tjPLYBW 5L7MCOSAyH6J2Nk0XsqtOfZJHnevBS2NVSzLSN1LtK+qsMy9Hrnr43tfnYq6/c8h tYONs9I7HyXVi6e+0NILaoSan49Mxi3Trp5YySdl41xmtswhx8OVrjQVySBrH4pA OYY3jyExERvOgtvnXjqdOOfoB8iS05gbuwS/UukvWdygekBjyCNQ+kz8hEKajPED WiSMUjS68KGINx1YPTS+AwLljaASlY8BSzrjrnoOvwOirX/QelpTm7qpvbFERV0M hEbtbQyt =XCCp -----END PGP SIGNATURE----- Merge tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC late updates from Olof Johansson: "This is some material that we picked up into our tree late. Most of it are smaller fixes and additions, some defconfig updates due to recent development, etc. Code-wise the largest portion is a series of PM updates for the at91 platform, and those have been in linux-next a while through the at91 tree before we picked them up" * tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (29 commits) arm64: dts: sprd: Add clock properties for serial devices Opt out of scripts/get_maintainer.pl ARM: ixp4xx: Remove duplicated include from common.c soc: ixp4xx: qmgr: Fix an NULL vs IS_ERR() check in probe arm64: tegra: Disable XUSB support on Jetson TX2 arm64: tegra: Enable SMMU translation for PCI on Tegra186 arm64: tegra: Fix insecure SMMU users for Tegra186 arm64: tegra: Select ARM_GIC_PM amba: tegra-ahb: Mark PM functions as __maybe_unused ARM: dts: logicpd-som-lv: Fix MMC1 card detect ARM: mvebu: drop return from void function ARM: mvebu: prefix coprocessor operand with p ARM: mvebu: drop unnecessary label ARM: mvebu: fix a leaked reference by adding missing of_node_put ARM: socfpga_defconfig: enable LTC2497 ARM: mvebu: kirkwood: remove error message when retrieving mac address ARM: at91: sama5: make ov2640 as a module ARM: OMAP1: ams-delta: fix early boot crash when LED support is disabled ARM: at91: remove HAVE_FB_ATMEL for sama5 SoC as they use DRM soc/fsl/qe: Fix an error code in qe_pin_request() ... |
||
|
Linus Torvalds
|
b0bb1269b9 |
RISC-V Patches for the 5.2 Merge Window, Part 1 v3
This patch set contains an assortment of RISC-V related patches that I'd
like to target for the 5.2 merge window. Most of the patches are
cleanups, but there are a handful of user-visible changes:
* The nosmp and nr_cpus command-line arguments are now supported, which
work like normal.
* The SBI console no longer installs itself as a preferred console, we
rely on standard mechanisms (/chosen, command-line, hueristics)
instead.
* sfence_remove_sfence_vma{,_asid} now pass their arguments along to the
SBI call.
* Modules now support BUG().
* A missing sfence.vma during boot has been added. This bug only
manifests during boot.
* The arch/riscv support for SiFive's L2 cache controller has been
merged, which should un-block the EDAC framework work.
I've only tested this on QEMU again, as I didn't have time to get things
running on the Unleashed. The latest master from this morning merges in
cleanly and passes the tests as well.
This patch set rebased my "5.2 MW, Part 1" patch set which includes an
erronous empty file. It's also a rebase of my "5.2 MW, Part 2" patch
set, in which I managed to create another file while attempting to
remove the empty file.
Sorry for all the noise!
-----BEGIN PGP SIGNATURE-----
iQJHBAABCAAxFiEEAM520YNJYN/OiG3470yhUCzLq0EFAlzeLhUTHHBhbG1lckBk
YWJiZWx0LmNvbQAKCRDvTKFQLMurQXV/D/9nz8KYxNKOVIXft27mw93Qnx5joblg
fibA7nGDuxCszSC3tfyaROJZuGKe1G24vP4RG7aVs+iwRmmFhtVdPwm7ZvIr+DfU
a5mzwWkxhMZP8lgxMAIn7iM/NWrBm7rWdGTU0BYjHlGkQ5z3WA67rU/r/vrowhUN
zK1U/ATLvFWDJv5rdDj8/T2rDJzWtAsuy2qlmQN30CCJoOXXgIdAj+fVG4IYoxO9
2+NFJU4Y0a+YczWW3qaGFjTaYYt/sNr/uA8AoBNqV1NvsopK1UO3txbcfJwvZZC3
JFU9WBjC7xuF2ihMWecIZ7XljZeqhlsP7lZDizatQ/mdL9k7+6elk1sdcNLC23dN
VWJakudE42dISCwSh49fAbeNSl/3R5VWSlZmVO18gsmslkGa4FwuoKjklnxx7hYx
fQfvaqMIEXy3YmKtmFneUXLdcGoWOjV0FfDh5Ye582tAmB2TzvgEJHPJI7suUA/a
RkZHcmVJTSRBMe2fS0qkYxy/wdIDtRW2yjypssl9G6zQPPCVW+maD70m/9oVdsgm
IL8MpoDxW0uAYsV8Ctt1/+Ux+BObMADIml/1HPQyBRA0qhorQQWk0TcbjEXeIShs
OOG8byAQUJx98z62zrKQ53+Pxdevcja6uKxu3f0yEHxl19dBJdT2BM6rjs3sO1hi
c3tX/U8o39H0Kg==
=mZwx
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-5.2-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux
Pull RISC-V updates from Palmer Dabbelt:
"This contains an assortment of RISC-V related patches that I'd like to
target for the 5.2 merge window. Most of the patches are cleanups, but
there are a handful of user-visible changes:
- The nosmp and nr_cpus command-line arguments are now supported,
which work like normal.
- The SBI console no longer installs itself as a preferred console,
we rely on standard mechanisms (/chosen, command-line, hueristics)
instead.
- sfence_remove_sfence_vma{,_asid} now pass their arguments along to
the SBI call.
- Modules now support BUG().
- A missing sfence.vma during boot has been added. This bug only
manifests during boot.
- The arch/riscv support for SiFive's L2 cache controller has been
merged, which should un-block the EDAC framework work.
I've only tested this on QEMU again, as I didn't have time to get
things running on the Unleashed. The latest master from this morning
merges in cleanly and passes the tests as well"
* tag 'riscv-for-linus-5.2-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux: (31 commits)
riscv: fix locking violation in page fault handler
RISC-V: sifive_l2_cache: Add L2 cache controller driver for SiFive SoCs
RISC-V: Add DT documentation for SiFive L2 Cache Controller
RISC-V: Avoid using invalid intermediate translations
riscv: Support BUG() in kernel module
riscv: Add the support for c.ebreak check in is_valid_bugaddr()
riscv: support trap-based WARN()
riscv: fix sbi_remote_sfence_vma{,_asid}.
riscv: move switch_mm to its own file
riscv: move flush_icache_{all,mm} to cacheflush.c
tty: Don't force RISCV SBI console as preferred console
RISC-V: Access CSRs using CSR numbers
RISC-V: Add interrupt related SCAUSE defines in asm/csr.h
RISC-V: Use tabs to align macro values in asm/csr.h
RISC-V: Fix minor checkpatch issues.
RISC-V: Support nr_cpus command line option.
RISC-V: Implement nosmp commandline option.
RISC-V: Add RISC-V specific arch_match_cpu_phys_id
riscv: vdso: drop unnecessary cc-ldoption
riscv: call pm_power_off from machine_halt / machine_power_off
...
|
||
Yash Shah
|
5545b6d1ba
|
RISC-V: Add DT documentation for SiFive L2 Cache Controller
Add device tree bindings for SiFive FU540 L2 cache controller driver Signed-off-by: Yash Shah <yash.shah@sifive.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Palmer Dabbelt <palmer@sifive.com> |
||
Rob Herring
|
8122de5460 |
dt-bindings: Convert vendor prefixes to json-schema
Convert the vendor prefix registry to a schema. This will enable checking that new vendor prefixes are added (in addition to the less than perfect checkpatch.pl check) and will also check against adding other prefixes which are not vendors. Converted vendor-prefixes.txt using the following sed script: sed -e 's/\([a-zA-Z0-9\-]*\)[[:space:]]*\([a-zA-Z0-9].*\)/ "^\1,\.\*\":\n description: \2/' Signed-off-by: Rob Herring <robh@kernel.org> |
||
Olof Johansson
|
faff3fcf01 |
AT91 SoC for 5.2
- PM changes for SAM9X60 -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEADBLyYlprFuNbTVNPjnmE/d7ZC0FAly+oWgACgkQPjnmE/d7 ZC1aZQ/+OXJh+v+38Gp+9aDkfDM8OHVR6h76gMzb38UWPqVxbR5bgclKT3mEg1j2 blng9+3Jhy49zoOzgBmlF6NUgSGbUN5w7F7+gxvh3dt3NE0wLVUNmobUUkhk3mWO pSKX21TZS5AG/PmsACn2NYQ4+p2EnMOIocqlCInNvozzfoF6N/e8ImWnGGC6+rr/ wrauPh69zFg4Djz06s1JGCcRI2kW3irtDlhxF8gEH7bovelmXRhgeRptHXQA7set kAmzm8xmCrlet3CCxx7xnnQ6gp//AXoTG6SAGJcDFbuDJinvtmo36o+8gGNt5fUN RHEbSFGthVaFFfvR9c8/XGcA9q1PvYylv+b21UklYVqRB01YMWyjUGJcb+38tbj2 8j5tjpqzJqg8p/nIxTPlRoS+xZF7cG5TORjolzF4y0eEyouibOYn+8tqXmO0F36Q 6rgdcHfajgks2j7AUtH8IV2d37ZF1i879qCQ5V45IVkAFKBUG8Iaa2v0DNAGWtpe y8pcfXpI5xIurDBKlctBxf/c6egPFKRTe4SxLJzimQaQblO4RF+cMfpmGmOe138j /u6h3yTaoF/2VkrR4DYCq5mZHBOON6BuBJqXWao8SK2eNZIt8LNKlN15w62qcj69 rtDXT7FiOM4nqOlTpFqisFYCPnQS4yBga+IMMyAuMvT5FTtMi7E= =/W4W -----END PGP SIGNATURE----- Merge tag 'at91-5.2-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/late AT91 SoC for 5.2 - PM changes for SAM9X60 * tag 'at91-5.2-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux: ARM: at91: pm: do not disable/enable PLLA for ULP modes ARM: at91: pm: disable RC oscillator in ULP0 ARM: at91: pm: add ULP1 support for SAM9X60 ARM: at91: pm: add support for per SoC wakeup source configuration ARM: at91: pm: keep at91_pm_backup_init() only for SAMA5D2 SoCs ARM: at91: pm: initial PM support for SAM9X60 dt-bindings: arm: atmel: add binding for SAM9X60 SoC ARM: at91: pm: introduce at91_soc_pm structure Signed-off-by: Olof Johansson <olof@lixom.net> |
||
|
Linus Torvalds
|
dc413a90ed |
ARM: SoC-related driver updates
Various driver updates for platforms and a couple of the small driver
subsystems we merge through our tree:
Among the larger pieces:
- Power management improvements for TI am335x and am437x (RTC suspend/wake)
- Misc new additions for Amlogic (socinfo updates)
- ZynqMP FPGA manager
- Nvidia improvements for reset/powergate handling
- PMIC wrapper for Mediatek MT8516
- Misc fixes/improvements for ARM SCMI, TEE, NXP i.MX SCU drivers
-----BEGIN PGP SIGNATURE-----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=YSfu
-----END PGP SIGNATURE-----
Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC-related driver updates from Olof Johansson:
"Various driver updates for platforms and a couple of the small driver
subsystems we merge through our tree:
Among the larger pieces:
- Power management improvements for TI am335x and am437x (RTC
suspend/wake)
- Misc new additions for Amlogic (socinfo updates)
- ZynqMP FPGA manager
- Nvidia improvements for reset/powergate handling
- PMIC wrapper for Mediatek MT8516
- Misc fixes/improvements for ARM SCMI, TEE, NXP i.MX SCU drivers"
* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (57 commits)
soc: aspeed: fix Kconfig
soc: add aspeed folder and misc drivers
spi: zynqmp: Fix build break
soc: imx: Add generic i.MX8 SoC driver
MAINTAINERS: Update email for Qualcomm SoC maintainer
memory: tegra: Fix a typos for "fdcdwr2" mc client
Revert "ARM: tegra: Restore memory arbitration on resume from LP1 on Tegra30+"
memory: tegra: Replace readl-writel with mc_readl-mc_writel
memory: tegra: Fix integer overflow on tick value calculation
memory: tegra: Fix missed registers values latching
ARM: tegra: cpuidle: Handle tick broadcasting within cpuidle core on Tegra20/30
optee: allow to work without static shared memory
soc/tegra: pmc: Move powergate initialisation to probe
soc/tegra: pmc: Remove reset sysfs entries on error
soc/tegra: pmc: Fix reset sources and levels
soc: amlogic: meson-gx-pwrc-vpu: Add support for G12A
soc: amlogic: meson-gx-pwrc-vpu: Fix power on/off register bitmask
fpga manager: Adding FPGA Manager support for Xilinx zynqmp
dt-bindings: fpga: Add bindings for ZynqMP fpga driver
firmware: xilinx: Add fpga API's
...
|
||
|
Linus Torvalds
|
e8a1d70117 |
ARM: Device-tree updates
Besides new bindings and additional descriptions of hardware blocks for
various SoCs and boards, the main new contents here is:
SoCs:
- Intel Agilex (SoCFPGA)
- NXP i.MX8MM (Quad Cortex-A53 with media/graphics focus)
New boards:
- Allwinner:
+ RerVision H3-DVK (H3)
+ Oceanic 5205 5inMFD (H6)
+ Beelink GS2 (H6)
+ Orange Pi 3 (H6)
- Rockchip:
+ Orange Pi RK3399
+ Nanopi NEO4
+ Veyron-Mighty Chromebook variant
- Amlogic:
+ SEI Robotics SEI510
- ST Micro:
+ stm32mp157a discovery1
+ stm32mp157c discovery2
- NXP:
+ Eckelmann ci4x10 (i.MX6DL)
+ i.MX8MM EVK (i.MX8MM)
+ ZII i.MX7 RPU2 (i.MX7)
+ ZII SPB4 (VF610)
+ Zii Ultra (i.MX8M)
+ TQ TQMa7S (i.MX7Solo)
+ TQ TQMa7D (i.MX7Dual)
+ Kobo Aura (i.MX50)
+ Menlosystems M53 (i.MX53)j
- Nvidia:
+ Jetson Nano (Tegra T210)
-----BEGIN PGP SIGNATURE-----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=lMVy
-----END PGP SIGNATURE-----
Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM Device-tree updates from Olof Johansson:
"Besides new bindings and additional descriptions of hardware blocks
for various SoCs and boards, the main new contents here is:
SoCs:
- Intel Agilex (SoCFPGA)
- NXP i.MX8MM (Quad Cortex-A53 with media/graphics focus)
New boards:
- Allwinner:
+ RerVision H3-DVK (H3)
+ Oceanic 5205 5inMFD (H6)
+ Beelink GS2 (H6)
+ Orange Pi 3 (H6)
- Rockchip:
+ Orange Pi RK3399
+ Nanopi NEO4
+ Veyron-Mighty Chromebook variant
- Amlogic:
+ SEI Robotics SEI510
- ST Micro:
+ stm32mp157a discovery1
+ stm32mp157c discovery2
- NXP:
+ Eckelmann ci4x10 (i.MX6DL)
+ i.MX8MM EVK (i.MX8MM)
+ ZII i.MX7 RPU2 (i.MX7)
+ ZII SPB4 (VF610)
+ Zii Ultra (i.MX8M)
+ TQ TQMa7S (i.MX7Solo)
+ TQ TQMa7D (i.MX7Dual)
+ Kobo Aura (i.MX50)
+ Menlosystems M53 (i.MX53)j
- Nvidia:
+ Jetson Nano (Tegra T210)"
* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (593 commits)
arm64: dts: bitmain: Add UART pinctrl support for Sophon Edge
arm64: dts: bitmain: Add pinctrl support for BM1880 SoC
arm64: dts: bitmain: Add GPIO Line names for Sophon Edge board
arm64: dts: bitmain: Add GPIO support for BM1880 SoC
ARM: dts: gemini: Indent DIR-685 partition table
dt-bindings: hwmon (pwm-fan) Remove dead "cooling-*-state" properties
ARM: dts: qcom-apq8064: Set 'cxo_board' as ref clock of the DSI PHY
arm64: dts: msm8998: thermal: Restrict thermal zone name length to under 20
arm64: dts: msm8998: thermal: Fix number of supported sensors
arm64: dts: msm8998-mtp: thermal: Remove skin and battery thermal zones
arm64: dts: exynos: Move fixed-clocks out of soc
arm64: dts: exynos: Move pmu and timer nodes out of soc
ARM: dts: s5pv210: Fix camera clock provider on Goni board
ARM: dts: exynos: Properly override node to use MDMA0 on Universal C210
ARM: dts: exynos: Move fixed-clocks out of soc on Exynos3250
ARM: dts: exynos: Remove unneeded address/size cells from fixed-clock on Exynos3250
ARM: dts: exynos: Move pmu and timer nodes out of soc
arm64: dts: rockchip: fix IO domain voltage setting of APIO5 on rockpro64
arm64: dts: db820c: Add sound card support
arm64: dts: apq8096-db820c: Add HDMI display support
...
|
||
|
Linus Torvalds
|
22c58fd70c |
ARM: SoC platform updates
SoC updates, mostly refactorings and cleanups of old legacy platforms.
Major themes this release:
- Conversion of ixp4xx to a modern platform (drivers, DT, bindings)
- Moving some of the ep93xx headers around to get it closer to multiplatform enabled.
- Cleanups of Davinci
This tag also contains a few patches that were queued up as fixes before
5.1 but I didn't get sent in before release.
-----BEGIN PGP SIGNATURE-----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=pUeO
-----END PGP SIGNATURE-----
Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC platform updates from Olof Johansson:
"SoC updates, mostly refactorings and cleanups of old legacy platforms.
Major themes this release:
- Conversion of ixp4xx to a modern platform (drivers, DT, bindings)
- Moving some of the ep93xx headers around to get it closer to
multiplatform enabled.
- Cleanups of Davinci
This also contains a few patches that were queued up as fixes before
5.1 but I didn't get sent in before release"
* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (123 commits)
ARM: debug-ll: add default address for digicolor
ARM: u300: regulator: add MODULE_LICENSE()
ARM: ep93xx: move private headers out of mach/*
ARM: ep93xx: move pinctrl interfaces into include/linux/soc
ARM: ep93xx: keypad: stop using mach/platform.h
ARM: ep93xx: move network platform data to separate header
ARM: stm32: add AMBA support for stm32 family
MAINTAINERS: update arch/arm/mach-davinci
ARM: rockchip: add missing of_node_put in rockchip_smp_prepare_pmu
ARM: dts: Add queue manager and NPE to the IXP4xx DTSI
soc: ixp4xx: qmgr: Add DT probe code
soc: ixp4xx: qmgr: Add DT bindings for IXP4xx qmgr
soc: ixp4xx: npe: Add DT probe code
soc: ixp4xx: Add DT bindings for IXP4xx NPE
soc: ixp4xx: qmgr: Pass resources
soc: ixp4xx: Remove unused functions
soc: ixp4xx: Uninline several functions
soc: ixp4xx: npe: Pass addresses as resources
ARM: ixp4xx: Turn the QMGR into a platform device
ARM: ixp4xx: Turn the NPE into a platform device
...
|
||
|
Linus Torvalds
|
a455eda33f |
Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal
Pull thermal soc updates from Eduardo Valentin: - thermal core has a new devm_* API for registering cooling devices. I took the entire series, that is why you see changes on drivers/hwmon in this pull (Guenter Roeck) - rockchip thermal driver gains support to PX30 SoC (Elaine Zhang) - the generic-adc thermal driver now considers the lookup table DT property as optional (Jean-Francois Dagenais) - Refactoring of tsens thermal driver (Amit Kucheria) - Cleanups on cpu cooling driver (Daniel Lezcano) - broadcom thermal driver dropped support to ACPI (Srinath Mannam) - tegra thermal driver gains support to OC hw throttle and GPU throtle (Wei Ni) - Fixes in several thermal drivers. * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal: (59 commits) hwmon: (pwm-fan) Use devm_thermal_of_cooling_device_register hwmon: (npcm750-pwm-fan) Use devm_thermal_of_cooling_device_register hwmon: (mlxreg-fan) Use devm_thermal_of_cooling_device_register hwmon: (gpio-fan) Use devm_thermal_of_cooling_device_register hwmon: (aspeed-pwm-tacho) Use devm_thermal_of_cooling_device_register thermal: rcar_gen3_thermal: Fix to show correct trip points number thermal: rcar_thermal: update calculation formula for R-Car Gen3 SoCs thermal: cpu_cooling: Actually trace CPU load in thermal_power_cpu_get_power thermal: rockchip: Support the PX30 SoC in thermal driver dt-bindings: rockchip-thermal: Support the PX30 SoC compatible thermal: rockchip: fix up the tsadc pinctrl setting error thermal: broadcom: Remove ACPI support thermal: Fix build error of missing devm_ioremap_resource on UM thermal/drivers/cpu_cooling: Remove pointless field thermal/drivers/cpu_cooling: Add Software Package Data Exchange (SPDX) thermal/drivers/cpu_cooling: Fixup the header and copyright thermal/drivers/cpu_cooling: Remove pointless test in power2state() thermal: rcar_gen3_thermal: disable interrupt in .remove thermal: rcar_gen3_thermal: fix interrupt type thermal: Introduce devm_thermal_of_cooling_device_register ... |
||
|
Olof Johansson
|
7a0c4c1708 |
Merge branch 'fixes' into arm/soc
Merge in a few pending fixes from pre-5.1 that didn't get sent in: MAINTAINERS: update arch/arm/mach-davinci ARM: dts: ls1021: Fix SGMII PCS link remaining down after PHY disconnect ARM: dts: imx6q-logicpd: Reduce inrush current on USBH1 ARM: dts: imx6q-logicpd: Reduce inrush current on start ARM: dts: imx: Fix the AR803X phy-mode ARM: dts: sun8i: a33: Reintroduce default pinctrl muxing arm64: dts: allwinner: a64: Rename hpvcc-supply to cpvdd-supply ARM: sunxi: fix a leaked reference by adding missing of_node_put ARM: sunxi: fix a leaked reference by adding missing of_node_put Signed-off-by: Olof Johansson <olof@lixom.net> |
||
|
Linus Torvalds
|
8649efb2f8 |
power supply and reset changes for the v5.2 series
Core:
* Add over-current health state
* Add standard, adaptive and custom charge types
* Add new properties for start/end charge threshold
New Drivers / Hardware:
* UCS1002 Programmable USB Port Power Controller
* Ingenic JZ47xx Battery Fuel Gauge
* AXP20x USB Power: Add AXP813 support
* AT91 poweroff: Add SAM9X60 support
* OLPC battery: Add XO-1.5 and XO-1.75 support
Misc. Changes:
* syscon-reboot: support mask property
* AXP288 fuel gauge: Blacklist ACEPC T8/T11
- Looks like some vendor thought it's a good idea to
build a desktop system with a fuel gauge, that slowly
"discharges"...
* cpcap-battery: Fix calculation errors
* misc. fixes
-----BEGIN PGP SIGNATURE-----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=qicd
-----END PGP SIGNATURE-----
Merge tag 'for-v5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply
Pull power supply and reset updates from Sebastian Reichel:
"Core:
- Add over-current health state
- Add standard, adaptive and custom charge types
- Add new properties for start/end charge threshold
New Drivers / Hardware:
- UCS1002 Programmable USB Port Power Controller
- Ingenic JZ47xx Battery Fuel Gauge
- AXP20x USB Power: Add AXP813 support
- AT91 poweroff: Add SAM9X60 support
- OLPC battery: Add XO-1.5 and XO-1.75 support
Misc Changes:
- syscon-reboot: support mask property
- AXP288 fuel gauge: Blacklist ACEPC T8/T11. Looks like some vendor
thought it's a good idea to build a desktop system with a fuel
gauge, that slowly "discharges"...
- cpcap-battery: Fix calculation errors
- misc fixes"
* tag 'for-v5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (54 commits)
power: supply: olpc_battery: force the le/be casts
power: supply: ucs1002: Fix build error without CONFIG_REGULATOR
power: supply: ucs1002: Fix wrong return value checking
power: supply: Add driver for Microchip UCS1002
dt-bindings: power: supply: Add bindings for Microchip UCS1002
power: supply: core: Add POWER_SUPPLY_HEALTH_OVERCURRENT constant
power: supply: core: fix clang -Wunsequenced
power: supply: core: Add missing documentation for CHARGE_CONTROL_* properties
power: supply: core: Add CHARGE_CONTROL_{START_THRESHOLD,END_THRESHOLD} properties
power: supply: core: Add Standard, Adaptive, and Custom charge types
power: supply: axp288_fuel_gauge: Add ACEPC T8 and T11 mini PCs to the blacklist
power: supply: bq27xxx_battery: Notify also about status changes
power: supply: olpc_battery: Have the framework register sysfs files for us
power: supply: olpc_battery: Add OLPC XO 1.75 support
power: supply: olpc_battery: Avoid using platform_info
power: supply: olpc_battery: Use devm_power_supply_register()
power: supply: olpc_battery: Move priv data to a struct
power: supply: olpc_battery: Use DT to get battery version
x86/platform/olpc: Use a correct version when making up a battery node
x86/platform/olpc: Trivial code move in DT fixup
...
|
||
Tom Burkart
|
652e22185a |
dt-bindings: pps: pps-gpio PPS ECHO implementation
This patch implements the device tree binding changes required for the PPS ECHO functionality for pps-gpio, that sysfs claims is available already. It adds two DT properties for configuring the PPS ECHO functionality. This patch is provided separated from the rest of the patch per Documentation/devicetree/bindings/submitting-patches.txt. This patch was originally written by Lukas Senger as part of a masters thesis project and modified for inclusion into the linux kernel by Tom Burkart. Link: http://lkml.kernel.org/r/20190324043305.6627-3-tom@aussec.com Signed-off-by: Tom Burkart <tom@aussec.com> Signed-off-by: Lukas Senger <lukas@fridolin.com> Acked-by: Rodolfo Giometti <giometti@enneenne.com> Reviewed-by: Rob Herring <robh@kernel.org> Cc: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Linus Torvalds
|
e0654264c4 |
- Fix-ups
- Remove unused BACKLIGHT_LCD_SUPPORT symbol; Kconfig
- Remove unused BACKLIGHT_CLASS_DEVICE dependencies; Kconfig
- Add DT support; lm3630a_bl
- Bug Fixes
- Fix error path issues; lm3630a_bl
-----BEGIN PGP SIGNATURE-----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=QRgB
-----END PGP SIGNATURE-----
Merge tag 'backlight-next-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight
Pull backlight updates from Lee Jones:
"Fix-ups:
- Remove unused BACKLIGHT_LCD_SUPPORT symbol
- Remove unused BACKLIGHT_CLASS_DEVICE dependencies
- Add DT support to lm3630a_bl
Bug Fixes:
- Fix error path issues in lm3630a_bl"
* tag 'backlight-next-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight:
backlight: lm3630a: Add firmware node support
dt-bindings: backlight: Add lm3630a bindings
backlight: lm3630a: Return 0 on success in update_status functions
video: lcd: Remove useless BACKLIGHT_CLASS_DEVICE dependencies
video: backlight: Remove useless BACKLIGHT_LCD_SUPPORT kernel symbol
|
||
|
Linus Torvalds
|
ebcf5bb282 |
- Core Frameworks
- Document (kerneldoc) core mfd_add_devices() API
- New Drivers
- Add support for Altera SOCFPGA System Manager
- Add support for Maxim MAX77650/77651 PMIC
- Add support for Maxim MAX77663 PMIC
- Add support for ST Multi-Function eXpander (STMFX)
- New Device Support
- Add support for LEDs to Intel Cherry Trail Whiskey Cove PMIC
- Add support for RTC to SAMSUNG Electronics S2MPA01 PMIC
- Add support for SAM9X60 to Atmel HLCDC (High-end LCD Controller)
- Add support for USB X-Powers AXP 8xx PMICs
- Add support for Integrated Sensor Hub (ISH) to ChromeOS EC
- Add support for USB PD Logger to ChromeOS EC
- Add support for AXP223 to X-Powers AXP series PMICs
- Add support for Power Supply to X-Powers AXP 803 PMICs
- Add support for Comet Lake to Intel Low Power Subsystem
- Add support for Fingerprint MCU to ChromeOS EC
- Add support for Touchpad MCU to ChromeOS EC
- Move TI LM3532 support to LED
- New Functionality
- Add/extend DT support; max77650, max77620
- Add support for power-off; max77620
- Add support for clocking; syscon
- Add support for host sleep event; cros_ec
- Fix-ups
- Trivial; Formatting, spelling, etc; Kconfig, sec-core, ab8500-debugfs
- Remove unused functionality; rk808, da9063-*
- SPDX conversion; da9063-*, atmel-*,
- Adapt/add new register definitions; cs47l35-tables, cs47l90-tables, imx6q-iomuxc-gpr
- Fix-up DT bindings; ti-lmu, cirrus,lochnagar
- Simply obtaining driver data; ssbi, t7l66xb, tc6387xb, tc6393xb
- Bug Fixes
- Fix incorrect defined values; max77620, da9063
- Fix device initialisation; twl6040
- Reset device on init; intel-lpss
- Fix build warnings when !OF; sun6i-prcm
- Register OF match tables; tps65912-spi
- Fix DMI matching; intel_quark_i2c_gpio
-----BEGIN PGP SIGNATURE-----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=dTSD
-----END PGP SIGNATURE-----
Merge tag 'mfd-next-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"Core Framework:
- Document (kerneldoc) core mfd_add_devices() API
New Drivers:
- Altera SOCFPGA System Manager
- Maxim MAX77650/77651 PMIC
- Maxim MAX77663 PMIC
- ST Multi-Function eXpander (STMFX)
New Device Support:
- LEDs support in Intel Cherry Trail Whiskey Cove PMIC
- RTC support in SAMSUNG Electronics S2MPA01 PMIC
- SAM9X60 support in Atmel HLCDC (High-end LCD Controller)
- USB X-Powers AXP 8xx PMICs
- Integrated Sensor Hub (ISH) in ChromeOS EC
- USB PD Logger in ChromeOS EC
- AXP223 in X-Powers AXP series PMICs
- Power Supply in X-Powers AXP 803 PMICs
- Comet Lake in Intel Low Power Subsystem
- Fingerprint MCU in ChromeOS EC
- Touchpad MCU in ChromeOS EC
- Move TI LM3532 support to LED
New Functionality:
- max77650, max77620: Add/extend DT support
- max77620 power-off
- syscon clocking
- croc_ec host sleep event
Fix-ups:
- Trivial; Formatting, spelling, etc; Kconfig, sec-core, ab8500-debugfs
- Remove unused functionality; rk808, da9063-*
- SPDX conversion; da9063-*, atmel-*,
- Adapt/add new register definitions; cs47l35-tables, cs47l90-tables, imx6q-iomuxc-gpr
- Fix-up DT bindings; ti-lmu, cirrus,lochnagar
- Simply obtaining driver data; ssbi, t7l66xb, tc6387xb, tc6393xb
Bug Fixes:
- Fix incorrect defined values; max77620, da9063
- Fix device initialisation; twl6040
- Reset device on init; intel-lpss
- Fix build warnings when !OF; sun6i-prcm
- Register OF match tables; tps65912-spi
- Fix DMI matching; intel_quark_i2c_gpio"
* tag 'mfd-next-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (65 commits)
mfd: Use dev_get_drvdata() directly
mfd: cros_ec: Instantiate properly CrOS Touchpad MCU device
mfd: cros_ec: Instantiate properly CrOS FP MCU device
mfd: cros_ec: Update the EC feature codes
mfd: intel-lpss: Add Intel Comet Lake PCI IDs
mfd: lochnagar: Add links to binding docs for sound and hwmon
mfd: ab8500-debugfs: Fix a typo ("deubgfs")
mfd: imx6sx: Add MQS register definition for iomuxc gpr
dt-bindings: mfd: LMU: Fix lm3632 dt binding example
mfd: intel_quark_i2c_gpio: Adjust IOT2000 matching
mfd: da9063: Fix OTP control register names to match datasheets for DA9063/63L
mfd: tps65912-spi: Add missing of table registration
mfd: axp20x: Add USB power supply mfd cell to AXP803
mfd: sun6i-prcm: Fix build warning for non-OF configurations
mfd: intel-lpss: Set the device in reset state when init
platform/chrome: Add support for v1 of host sleep event
mfd: cros_ec: Add host_sleep_event_v1 command
mfd: cros_ec: Instantiate the CrOS USB PD logger driver
mfd: cs47l90: Make DAC_AEC_CONTROL_2 readable
mfd: cs47l35: Make DAC_AEC_CONTROL_2 readable
...
|
||
|
Linus Torvalds
|
414147d99b |
pci-v5.2-changes
-----BEGIN PGP SIGNATURE-----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=4Vc+
-----END PGP SIGNATURE-----
Merge tag 'pci-v5.2-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI updates from Bjorn Helgaas:
"Enumeration changes:
- Add _HPX Type 3 settings support, which gives firmware more
influence over device configuration (Alexandru Gagniuc)
- Support fixed bus numbers from bridge Enhanced Allocation
capabilities (Subbaraya Sundeep)
- Add "external-facing" DT property to identify cases where we
require IOMMU protection against untrusted devices (Jean-Philippe
Brucker)
- Enable PCIe services for host controller drivers that use managed
host bridge alloc (Jean-Philippe Brucker)
- Log PCIe port service messages with pci_dev, not the pcie_device
(Frederick Lawler)
- Convert pciehp from pciehp_debug module parameter to generic
dynamic debug (Frederick Lawler)
Peer-to-peer DMA:
- Add whitelist of Root Complexes that support peer-to-peer DMA
between Root Ports (Christian König)
Native controller drivers:
- Add PCI host bridge DMA ranges for bridges that can't DMA
everywhere, e.g., iProc (Srinath Mannam)
- Add Amazon Annapurna Labs PCIe host controller driver (Jonathan
Chocron)
- Fix Tegra MSI target allocation so DMA doesn't generate unwanted
MSIs (Vidya Sagar)
- Fix of_node reference leaks (Wen Yang)
- Fix Hyper-V module unload & device removal issues (Dexuan Cui)
- Cleanup R-Car driver (Marek Vasut)
- Cleanup Keystone driver (Kishon Vijay Abraham I)
- Cleanup i.MX6 driver (Andrey Smirnov)
Significant bug fixes:
- Reset Lenovo ThinkPad P50 GPU so nouveau works after reboot (Lyude
Paul)
- Fix Switchtec firmware update performance issue (Wesley Sheng)
- Work around Pericom switch link retraining erratum (Stefan Mätje)"
* tag 'pci-v5.2-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (141 commits)
MAINTAINERS: Add Karthikeyan Mitran and Hou Zhiqiang for Mobiveil PCI
PCI: pciehp: Remove pointless MY_NAME definition
PCI: pciehp: Remove pointless PCIE_MODULE_NAME definition
PCI: pciehp: Remove unused dbg/err/info/warn() wrappers
PCI: pciehp: Log messages with pci_dev, not pcie_device
PCI: pciehp: Replace pciehp_debug module param with dyndbg
PCI: pciehp: Remove pciehp_debug uses
PCI/AER: Log messages with pci_dev, not pcie_device
PCI/DPC: Log messages with pci_dev, not pcie_device
PCI/PME: Replace dev_printk(KERN_DEBUG) with dev_info()
PCI/AER: Replace dev_printk(KERN_DEBUG) with dev_info()
PCI: Replace dev_printk(KERN_DEBUG) with dev_info(), etc
PCI: Replace printk(KERN_INFO) with pr_info(), etc
PCI: Use dev_printk() when possible
PCI: Cleanup setup-bus.c comments and whitespace
PCI: imx6: Allow asynchronous probing
PCI: dwc: Save root bus for driver remove hooks
PCI: dwc: Use devm_pci_alloc_host_bridge() to simplify code
PCI: dwc: Free MSI in dw_pcie_host_init() error path
PCI: dwc: Free MSI IRQ page in dw_pcie_free_msi()
...
|
||
Elaine Zhang
|
4b984e7bfb |
dt-bindings: rockchip-thermal: Support the PX30 SoC compatible
Add a new compatible for thermal founding on PX30 SoCs. Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com> |
||
Jean-Francois Dagenais
|
80d95930dc |
dt-bindings: thermal: generic-adc: make lookup-table optional
Update binding description making lookup-table optional. Signed-off-by: Jean-Francois Dagenais <jeff.dagenais@gmail.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com> |
||
Talel Shenhar
|
c8044b918b |
dt-bindings: thermal: al-thermal: Add binding documentation
Add thermal binding documentation for Amazon's Annapurna Labs Thermal Sensor. Signed-off-by: Talel Shenhar <talel@amazon.com> Reviewed-by: David Woodhouse <dwmw@amazon.co.uk> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com> |
||
Amit Kucheria
|
a9604f2808 |
dt: thermal: tsens: Add bindings for qcs404
qcs404 uses v1 of the TSENS IP block. Create a fallback DT property "qcom,tsens-v1" to gather common code Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com> |
||
Brian Masney
|
32fcb75c66 |
dt-bindings: backlight: Add lm3630a bindings
Add new backlight bindings for the TI LM3630A dual-string white LED. Signed-off-by: Brian Masney <masneyb@onstation.org> Reviewed-by: Rob Herring <robh@kernel.org> Acked-by: Pavel Machek <pavel@ucw.cz> Acked-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> |
||
Charles Keepax
|
c273e63129 |
mfd: lochnagar: Add links to binding docs for sound and hwmon
Lochnagar is an evaluation and development board for Cirrus Logic Smart CODEC and Amp devices. It allows the connection of most Cirrus Logic devices on mini-cards, as well as allowing connection of various application processor systems to provide a full evaluation platform. This driver supports the board controller chip on the Lochnagar board. Add links to the binding documents for the new sound and hardware monitor parts of the driver. Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> |
||
Dan Murphy
|
a2a0c4ef4e |
dt-bindings: mfd: LMU: Fix lm3632 dt binding example
Fix the lm3632 dt binding examples as the LCM enable GPIOs are defined as enable GPIOs per the regulator/lm363x-regulator.txt bindings document. Signed-off-by: Dan Murphy <dmurphy@ti.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> |
||
Claudiu Beznea
|
730080a758 |
dt-bindings: mfd: Add bindings for SAM9X60 HLCD controller
Add new compatible string for the HLCD controller on SAM9X60 SoC. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> |
||
Fabrice Gasnier
|
c6ba08819b |
dt-bindings: stm32: syscon: Add clock support
STM32 system configuration controller registers needs to be clocked. Document clock support on stm32-syscon. Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> |
||
Lee Jones
|
60a7a9a249 |
Immutable branch between MFD, ARM and Net due for the 5.2 merge window
-----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEdrbJNaO+IJqU8IdIUa+KL4f8d2EFAlyjBD8ACgkQUa+KL4f8 d2EpUw/+KZuPkcazjIvRTqWkzk3UcoEfZF79vP2qJbHSXMTcBJTdCM1Ahm7thwii 2mhtXlBFk8PPtwlVhhggfkY5a3+InozsiAL7qn7GyYyaxk7KHHInG0YQTStHW8Zl IOmuo+WFmpAEXJ1vPSJN0xCwiK8BtEpbSenBN6v7OXA+PgRTKIuvTN4ZB3pP9c2Q bTT3uB9uCibSP+H+NvMJR1TRtnQUcBevle8qUqK9Y/HTiq2T+KKDMBqs+J4DyGuZ pJ2bNziJDGY9AXXO3ndPW7WYoXmRjZMOFZXYegP8uKOD1dRm/OebBZI6raLSreq2 OcFDLFsdeU5GTc/OcoIITz8GpTbvGQoh0j5F7a1BKflj7GRcvvu8key3onh3V85m G6vTdrZhN9Bw2G80KTkCOPGcztCWKxIlU+Xn9er7Q1u1qacx/IYUBf1PjjvP+ZCO FY/jJfVf6PiTVkiStdHzras3PYjj+RHUWM83NKw9F9T8ZdLJOd3myd5Zcfa2dJf2 I/BqsH3JYWLIHOjdcpMLe+FwG2gMKiM0WDpqPYUzjokM6tRfShO/n9SSj/mNcv7J 64szoH53c841nUAWTE2v/E0n+UB2LGCFkyZlA1NgEMwV3a2wLuNJYYDe4Fj0Y/Fp ydiYOa3H3PtFFIRmp+kZu5YWpTNazmf3Obteu/F6l644Yik5d+Q= =55X1 -----END PGP SIGNATURE----- Merge branches 'ib-mfd-arm-leds-5.2', 'ib-mfd-gpio-input-leds-power-5.2', 'ib-mfd-pinctrl-5.2-2' and 'ib-mfd-regulator-5.2', tag 'ib-mfd-arm-net-5.2' into ibs-for-mfd-merged Immutable branch between MFD, ARM and Net due for the 5.2 merge window |
||
Wei Ni
|
8d3d462b68 |
of: Add bindings of OC hw throttle for Tegra soctherm
Add OC HW throttle configuration for soctherm in DT. It is used to describe the OCx throttle events. Signed-off-by: Wei Ni <wni@nvidia.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com> |
||
|
Wei Ni
|
7d8ac6b282 |
of: Add bindings of gpu hw throttle for Tegra soctherm
Add "nvidia,gpu-throt-level" property to set gpu hw throttle level. Signed-off-by: Wei Ni <wni@nvidia.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com> |
||
|
Wei Ni
|
9967a1bc81 |
of: Add bindings of thermtrip for Tegra soctherm
Add optional property "nvidia,thermtrips". If present, these trips will be used as HW shutdown trips, and critical trips will be used as SW shutdown trips. Signed-off-by: Wei Ni <wni@nvidia.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com> |
||
Bjorn Helgaas
|
0b8439d374 |
Merge branch 'remotes/lorenzo/pci/keystone'
- Move IRQ register address computation inside macros (Kishon Vijay
Abraham I)
- Separate legacy IRQ and MSI configuration (Kishon Vijay Abraham I)
- Use hwirq, not virq, to get MSI IRQ number offset (Kishon Vijay Abraham
I)
- Squash ks_pcie_handle_msi_irq() into ks_pcie_msi_irq_handler() (Kishon
Vijay Abraham I)
- Add dwc support for platforms with custom MSI controllers (Kishon Vijay
Abraham I)
- Add keystone-specific MSI controller (Kishon Vijay Abraham I)
- Remove dwc host_ops previously used for keystone-specific MSI (Kishon
Vijay Abraham I)
- Skip dwc default MSI init if platform has custom MSI controller (Kishon
Vijay Abraham I)
- Implement .start_link() and .stop_link() for keystone endpoint support
(Kishon Vijay Abraham I)
- Add keystone "reg-names" DT binding (Kishon Vijay Abraham I)
- Squash ks_pcie_dw_host_init() into ks_pcie_add_pcie_port() (Kishon
Vijay Abraham I)
- Get keystone register resources from DT by name, not index (Kishon
Vijay Abraham I)
- Get DT resources in .probe() to prepare for endpoint support (Kishon
Vijay Abraham I)
- Add "ti,syscon-pcie-mode" DT property for PCIe mode configuration
(Kishon Vijay Abraham I)
- Explicitly set keystone to host mode (Kishon Vijay Abraham I)
- Document DT "atu" reg-names requirement for DesignWare core >= 4.80
(Kishon Vijay Abraham I)
- Enable dwc iATU unroll for endpoint mode as well as host mode (Kishon
Vijay Abraham I)
- Add dwc "version" to identify core >= 4.80 for ATU programming (Kishon
Vijay Abraham I)
- Don't build ARM32-specific keystone code on ARM64 (Kishon Vijay Abraham
I)
- Add DT binding for keystone PCIe RC in AM654 SoC (Kishon Vijay Abraham
I)
- Add keystone support for AM654 SoC PCIe RC (Kishon Vijay Abraham I)
- Reset keystone PHYs before enabling them (Kishon Vijay Abraham I)
- Make of_pci_get_max_link_speed() available to endpoint drivers as well
as host drivers (Kishon Vijay Abraham I)
- Add keystone support for DT "max-link-speed" property (Kishon Vijay
Abraham I)
- Add endpoint library support for BAR buffer alignment (Kishon Vijay
Abraham I)
- Make all dw_pcie_ep_ops structs const (Kishon Vijay Abraham I)
- Fix fencepost error in dw_pcie_ep_find_capability() (Kishon Vijay
Abraham I)
- Add dwc hooks for dbi/dbi2 that share the same address space (Kishon
Vijay Abraham I)
- Add keystone support for TI AM654x in endpoint mode (Kishon Vijay
Abraham I)
- Configure designware endpoints to advertise smallest resizable BAR
(1MB) (Kishon Vijay Abraham I)
- Align designware endpoint ATU windows for raising MSIs (Kishon Vijay
Abraham I)
- Add endpoint test support for TI AM654x (Kishon Vijay Abraham I)
- Fix endpoint test test_reg_bar issue (Kishon Vijay Abraham I)
* remotes/lorenzo/pci/keystone:
misc: pci_endpoint_test: Fix test_reg_bar to be updated in pci_endpoint_test
misc: pci_endpoint_test: Add support to test PCI EP in AM654x
PCI: designware-ep: Use aligned ATU window for raising MSI interrupts
PCI: designware-ep: Configure Resizable BAR cap to advertise the smallest size
PCI: keystone: Add support for PCIe EP in AM654x Platforms
dt-bindings: PCI: Add PCI EP DT binding documentation for AM654
PCI: dwc: Add callbacks for accessing dbi2 address space
PCI: dwc: Fix dw_pcie_ep_find_capability() to return correct capability offset
PCI: dwc: Add const qualifier to struct dw_pcie_ep_ops
PCI: endpoint: Add support to specify alignment for buffers allocated to BARs
PCI: keystone: Add support to set the max link speed from DT
PCI: OF: Allow of_pci_get_max_link_speed() to be used by PCI Endpoint drivers
PCI: keystone: Invoke phy_reset() API before enabling PHY
PCI: keystone: Add support for PCIe RC in AM654x Platforms
dt-bindings: PCI: Add PCI RC DT binding documentation for AM654
PCI: keystone: Prevent ARM32 specific code to be compiled for ARM64
PCI: dwc: Fix ATU identification for designware version >= 4.80
PCI: dwc: Enable iATU unroll for endpoint too
dt-bindings: PCI: Document "atu" reg-names
PCI: keystone: Explicitly set the PCIe mode
dt-bindings: PCI: Add dt-binding to configure PCIe mode
PCI: keystone: Move resources initialization to prepare for EP support
PCI: keystone: Use platform_get_resource_byname() to get memory resources
PCI: keystone: Perform host initialization in a single function
dt-bindings: PCI: keystone: Add "reg-names" binding information
PCI: keystone: Cleanup error_irq configuration
PCI: keystone: Add start_link()/stop_link() dw_pcie_ops
PCI: dwc: Remove default MSI initialization for platform specific MSI chips
PCI: dwc: Remove Keystone specific dw_pcie_host_ops
PCI: keystone: Use Keystone specific msi_irq_chip
PCI: dwc: Add support to use non default msi_irq_chip
PCI: keystone: Cleanup ks_pcie_msi_irq_handler()
PCI: keystone: Use hwirq to get the MSI IRQ number offset
PCI: keystone: Add separate functions for configuring MSI and legacy interrupt
PCI: keystone: Cleanup interrupt related macros
# Conflicts:
# drivers/pci/controller/dwc/pcie-designware.h
|
||
|
Linus Torvalds
|
0aed4b2818 |
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov: "A few new drivers: - driver for Azoteq IQS550/572/525 touch controllers - driver for Microchip AT42QT1050 keys - driver for GPIO controllable vibrators - support for GT5663 in Goodix driver ... along with miscellaneous driver fixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: libps2 - mark expected switch fall-through Input: qt1050 - add Microchip AT42QT1050 support Input: add support for Azoteq IQS550/572/525 Input: add a driver for GPIO controllable vibrators Input: synaptics-rmi4 - fix enum_fmt Input: synaptics-rmi4 - fill initial format HID: input: add mapping for KEY_KBD_LAYOUT_NEXT Input: add KEY_KBD_LAYOUT_NEXT Input: hyperv-keyboard - add module description Input: olpc_apsp - depend on ARCH_MMP Input: sun4i-a10-lradc-keys - add support for A83T Input: snvs_pwrkey - use dev_pm_set_wake_irq() to simplify code Input: lpc32xx-key - add clocks property and fix DT binding example Input: i8042 - signal wakeup from atkbd/psmouse Input: goodix - add GT5663 CTP support Input: goodix - add regulators suppot Input: evdev - use struct_size() in kzalloc() and vzalloc() Input: edt-ft5x06 - convert to use SPDX identifier Input: edt-ft5x06 - enable ACPI enumeration |
||
|
Linus Torvalds
|
a3958f5e13 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Pull networking fixes from David Miller:
"Fixes all over:
1) Netdev refcnt leak in nf_flow_table, from Taehee Yoo.
2) Fix RCU usage in nf_tables, from Florian Westphal.
3) Fix DSA build when NET_DSA_TAG_BRCM_PREPEND is not set, from Yue
Haibing.
4) Add missing page read/write ops to realtek driver, from Heiner
Kallweit.
5) Endianness fix in qrtr code, from Nicholas Mc Guire.
6) Fix various bugs in DSA_SKB_* macros, from Vladimir Oltean.
7) Several BPF documentation cures, from Quentin Monnet.
8) Fix undefined behavior in narrow load handling of BPF verifier,
from Krzesimir Nowak.
9) DMA ops crash in SGI Seeq driver due to not set netdev parent
device pointer, from Thomas Bogendoerfer.
10) Flow dissector has to disable preemption when invoking BPF
program, from Eric Dumazet"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (48 commits)
net: ethernet: stmmac: dwmac-sun8i: enable support of unicast filtering
net: ethernet: ti: netcp_ethss: fix build
flow_dissector: disable preemption around BPF calls
bonding: fix arp_validate toggling in active-backup mode
net: meson: fixup g12a glue ephy id
net: phy: realtek: Replace phy functions with non-locked version in rtl8211e_config_init()
net: seeq: fix crash caused by not set dev.parent
of_net: Fix missing of_find_device_by_node ref count drop
net: mvpp2: cls: Add missing NETIF_F_NTUPLE flag
bpf: fix undefined behavior in narrow load handling
libbpf: detect supported kernel BTF features and sanitize BTF
selftests: bpf: Add files generated after build to .gitignore
tools: bpf: synchronise BPF UAPI header with tools
bpf: fix minor issues in documentation for BPF helpers.
bpf: fix recurring typo in documentation for BPF helpers
bpf: fix script for generating man page on BPF helpers
bpf: add various test cases for backward jumps
net: dccp : proto: remove Unneeded variable "err"
net: dsa: Remove the now unused DSA_SKB_CB_COPY() macro
net: dsa: Remove dangerous DSA_SKB_CLONE() macro
...
|
||
|
Linus Torvalds
|
55472bae53 |
linux-watchdog 5.2-rc1 tag
-----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.14 (GNU/Linux) iEYEABECAAYFAlzZRp0ACgkQ+iyteGJfRsq1WQCfaR8jQjujN1bGWghnSWbTr01X O3cAn3RmJWiEtI0zmmMcRQBna8nj4cHJ =PuHw -----END PGP SIGNATURE----- Merge tag 'linux-watchdog-5.2-rc1' of git://www.linux-watchdog.org/linux-watchdog Pull watchdog updates from Wim Van Sebroeck: - a new watchdog driver for the ROHM BD70528 watchdog block - a new watchdog driver for the i.MX system controller watchdog - conversions to use device managed functions and other improvements - refactor watchdog_init_timeout - make watchdog core configurable as module - pretimeout governors improvements - a lot of other fixes * tag 'linux-watchdog-5.2-rc1' of git://www.linux-watchdog.org/linux-watchdog: (114 commits) watchdog: Enforce that at least one pretimeout governor is enabled watchdog: stm32: add dynamic prescaler support watchdog: Improve Kconfig entry ordering and dependencies watchdog: npcm: Enable modular builds watchdog: Make watchdog core configurable as module watchdog: Move pretimeout governor configuration up watchdog: Use depends instead of select for pretimeout governors watchdog: rtd119x: drop unused module.h include watchdog: intel_scu: make it explicitly non-modular watchdog: coh901327: make it explicitly non-modular watchdog: ziirave_wdt: drop warning after calling watchdog_init_timeout watchdog: xen_wdt: drop warning after calling watchdog_init_timeout watchdog: stm32_iwdg: drop warning after calling watchdog_init_timeout watchdog: st_lpc_wdt: drop warning after calling watchdog_init_timeout watchdog: sp5100_tco: drop warning after calling watchdog_init_timeout watchdog: renesas_wdt: drop warning after calling watchdog_init_timeout watchdog: nic7018_wdt: drop warning after calling watchdog_init_timeout watchdog: ni903x_wdt: drop warning after calling watchdog_init_timeout watchdog: imx_sc_wdt: drop warning after calling watchdog_init_timeout watchdog: i6300esb: drop warning after calling watchdog_init_timeout ... |
||
|
Linus Torvalds
|
4dbf09fea6 |
This pull request contains the following changes for MTD:
MTD core changes:
- New AFS partition parser
- Update MAINTAINERS entry
- Use of fall-throughs markers
NAND core changes:
- Support having the bad block markers in either the first, second or
last page of a block. The combination of all three location is now
possible.
- Constification of NAND_OP_PARSER(_PATTERN) elements.
- Generic NAND DT bindings changed to yaml format (can be used to
check the proposed bindings. First platform to be fully supported:
sunxi.
- Stopped using several legacy hooks.
- Preparation to use the generic NAND layer with the addition of
several helpers and the removal of the struct nand_chip from generic
functions.
- Kconfig cleanup to prepare the introduction of external ECC engines
support.
- Fallthrough comments.
- Introduction of the SPI-mem dirmap API for SPI-NAND devices.
Raw NAND controller drivers changes:
- nandsim:
* Switch to ->exec-op().
- meson:
* Misc cleanups and fixes.
* New OOB layout.
- Sunxi:
* A23/A33 NAND DMA support.
- Ingenic:
* Full reorganization and cleanup.
* Clear separation between NAND controller and ECC engine.
* Support JZ4740 an JZ4725B.
- Denali:
* Clear controller/chip separation.
* ->exec_op() migration.
* Various cleanups.
- fsl_elbc:
* Enable software ECC support.
- Atmel:
* Sam9x60 support.
- GPMI:
* Introduce the GPMI_IS_MXS() macro.
- Various trivial/spelling/coding style fixes.
SPI NOR core changes:
- Print all JEDEC ID bytes on error
- Fix comment of spi_nor_find_best_erase_type()
- Add region locking flags for s25fl512s
SPI NOR controller drivers changes:
- intel-spi:
* Avoid crossing 4K address boundary on read/write
* Add support for Intel Comet Lake SPI serial flash
-----BEGIN PGP SIGNATURE-----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=HXap
-----END PGP SIGNATURE-----
Merge tag 'mtd/for-5.2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull MTD updates from Richard Weinberger:
"MTD core changes:
- New AFS partition parser
- Update MAINTAINERS entry
- Use of fall-throughs markers
NAND core changes:
- Support having the bad block markers in either the first, second or
last page of a block. The combination of all three location is now
possible.
- Constification of NAND_OP_PARSER(_PATTERN) elements.
- Generic NAND DT bindings changed to yaml format (can be used to
check the proposed bindings. First platform to be fully supported:
sunxi.
- Stopped using several legacy hooks.
- Preparation to use the generic NAND layer with the addition of
several helpers and the removal of the struct nand_chip from
generic functions.
- Kconfig cleanup to prepare the introduction of external ECC engines
support.
- Fallthrough comments.
- Introduction of the SPI-mem dirmap API for SPI-NAND devices.
Raw NAND controller drivers changes:
- nandsim:
- Switch to ->exec-op().
- meson:
- Misc cleanups and fixes.
- New OOB layout.
- Sunxi:
- A23/A33 NAND DMA support.
- Ingenic:
- Full reorganization and cleanup.
- Clear separation between NAND controller and ECC engine.
- Support JZ4740 an JZ4725B.
- Denali:
- Clear controller/chip separation.
- ->exec_op() migration.
- Various cleanups.
- fsl_elbc:
- Enable software ECC support.
- Atmel:
- Sam9x60 support.
- GPMI:
- Introduce the GPMI_IS_MXS() macro.
- Various trivial/spelling/coding style fixes.
SPI NOR core changes:
- Print all JEDEC ID bytes on error
- Fix comment of spi_nor_find_best_erase_type()
- Add region locking flags for s25fl512s
SPI NOR controller drivers changes:
- intel-spi:
- Avoid crossing 4K address boundary on read/write
- Add support for Intel Comet Lake SPI serial flash"
* tag 'mtd/for-5.2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (120 commits)
mtd: part: fix incorrect format specifier for an unsigned long long
mtd: lpddr_cmds: Mark expected switch fall-through
mtd: phram: Mark expected switch fall-throughs
mtd: cfi_cmdset_0002: Mark expected switch fall-throughs
mtd: cfi_util: mark expected switch fall-throughs
MAINTAINERS: MTD Git repository is hosted on kernel.org
MAINTAINERS: Update jffs2 entry
mtd: afs: add v2 partition parsing
mtd: afs: factor the IIS read into partition parser
mtd: afs: factor footer parsing into the v1 part parsing
mtd: factor out v1 partition parsing
mtd: afs: simplify partition detection
mtd: afs: simplify partition parsing
mtd: partitions: Add OF support to AFS partitions
mtd: partitions: Add AFS partitions DT bindings
mtd: afs: Move AFS partition parser to parsers subdir
mtd: maps: Make uclinux_ram_map static
mtd: maps: Allow MTD_PHYSMAP with MTD_RAM
MAINTAINERS: Add myself as MTD maintainer
MAINTAINERS: Remove my name from the MTD and NAND entries
...
|
||
|
Linus Torvalds
|
8148c17b17 |
This is the bulk of the GPIO changes for the v5.2 kernel cycle:
Core changes:
- The gpiolib MMIO driver has been enhanced to handle two direction
registers, i.e. one register to set lines as input and one register
to set lines as output. It turns out some silicon engineer thinks
the ability to configure a line as input and output at the same
time makes sense, this can be debated but includes a lot of analog
electronics reasoning, and the registers are there and need to
be handled consistently. Unsurprisingly, we enforce the lines to
be either inputs or outputs in such schemes.
- Send in the proper argument value to .set_config() dispatched to
the pin control subsystem. Nobody used it before, now someone
does, so fix it to work as expected.
- The ACPI gpiolib portions can now handle pin bias setting (pull up
or pull down). This has been in the ACPI spec for years and we
finally have it properly integrated with Linux GPIOs. It was based
on an observation from Andy Schevchenko that Thomas Petazzoni's
changes to the core for biasing the PCA950x GPIO expander actually
happen to fit hand-in-glove with what the ACPI core needed.
Such nice synergies happen sometimes.
New drivers:
- A new driver for the Mellanox BlueField GPIO controller. This is
using 64bit MMIO registers and can configure lines as inputs
and outputs at the same time and after improving the MMIO library
we handle it just fine. Interesting.
- A new IXP4xx proper gpiochip driver with hierarchical interrupts
should be coming in from the ARM SoC tree as well.
Driver enhancements:
- The PCA053x driver handles the CAT9554 GPIO expander.
- The PCA053x driver handles the NXP PCAL6416 GPIO expander.
- Wake-up support on PCA053x GPIO lines.
- OMAP now does a nice asynchronous IRQ handling on wake-ups by
letting everything wake up on edges, and this makes runtime PM
work as expected too.
Misc:
- Several cleanups such as devres fixes.
- Get rid of some languager comstructs that cause problems when
compiling with LLVMs clang.
- Documentation review and update.
-----BEGIN PGP SIGNATURE-----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=rhto
-----END PGP SIGNATURE-----
Merge tag 'gpio-v5.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull gpio updates from Linus Walleij:
"This is the bulk of the GPIO changes for the v5.2 kernel cycle. A bit
later than usual because I was ironing out my own mistakes. I'm
holding some stuff back for the next kernel as a result, and this
should be a healthy and well tested batch.
Core changes:
- The gpiolib MMIO driver has been enhanced to handle two direction
registers, i.e. one register to set lines as input and one register
to set lines as output. It turns out some silicon engineer thinks
the ability to configure a line as input and output at the same
time makes sense, this can be debated but includes a lot of analog
electronics reasoning, and the registers are there and need to be
handled consistently. Unsurprisingly, we enforce the lines to be
either inputs or outputs in such schemes.
- Send in the proper argument value to .set_config() dispatched to
the pin control subsystem. Nobody used it before, now someone does,
so fix it to work as expected.
- The ACPI gpiolib portions can now handle pin bias setting (pull up
or pull down). This has been in the ACPI spec for years and we
finally have it properly integrated with Linux GPIOs. It was based
on an observation from Andy Schevchenko that Thomas Petazzoni's
changes to the core for biasing the PCA950x GPIO expander actually
happen to fit hand-in-glove with what the ACPI core needed. Such
nice synergies happen sometimes.
New drivers:
- A new driver for the Mellanox BlueField GPIO controller. This is
using 64bit MMIO registers and can configure lines as inputs and
outputs at the same time and after improving the MMIO library we
handle it just fine. Interesting.
- A new IXP4xx proper gpiochip driver with hierarchical interrupts
should be coming in from the ARM SoC tree as well.
Driver enhancements:
- The PCA053x driver handles the CAT9554 GPIO expander.
- The PCA053x driver handles the NXP PCAL6416 GPIO expander.
- Wake-up support on PCA053x GPIO lines.
- OMAP now does a nice asynchronous IRQ handling on wake-ups by
letting everything wake up on edges, and this makes runtime PM work
as expected too.
Misc:
- Several cleanups such as devres fixes.
- Get rid of some languager comstructs that cause problems when
compiling with LLVMs clang.
- Documentation review and update"
* tag 'gpio-v5.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (85 commits)
gpio: Update documentation
docs: gpio: convert docs to ReST and rename to *.rst
gpio: sch: Remove write-only core_base
gpio: pxa: Make two symbols static
gpiolib: acpi: Respect pin bias setting
gpiolib: acpi: Add acpi_gpio_update_gpiod_lookup_flags() helper
gpiolib: acpi: Set pin value, based on bias, more accurately
gpiolib: acpi: Change type of dflags
gpiolib: Introduce GPIO_LOOKUP_FLAGS_DEFAULT
gpiolib: Make use of enum gpio_lookup_flags consistent
gpiolib: Indent entry values of enum gpio_lookup_flags
gpio: pca953x: add support for pca6416
dt-bindings: gpio: pca953x: document the nxp,pca6416
gpio: pca953x: add pcal6416 to the of_device_id table
gpio: gpio-omap: Remove conditional pm_runtime handling for GPIO interrupts
gpio: gpio-omap: configure edge detection for level IRQs for idle wakeup
tracing: stop making gpio tracing configurable
gpio: pca953x: Configure wake-up path when wake-up is enabled
gpio: of: Optimize quirk checks
gpio: mmio: Drop bgpio_dir_inverted
...
|
||
Petr Štetiar
|
5182895027 |
dt-bindings: doc: net: remove Linux API references
In commit |
||
|
Linus Torvalds
|
cece6460c2 |
pwm: Changes for v5.2-rc1
Nothing out of the ordinary this cycle. The bulk of this is a collection of fixes for existing drivers and some cleanups. There's one new driver for i.MX SoCs and addition of support for some new variants to existing drivers. -----BEGIN PGP SIGNATURE----- iQJNBAABCAA3FiEEiOrDCAFJzPfAjcif3SOs138+s6EFAlzVW/MZHHRoaWVycnku cmVkaW5nQGdtYWlsLmNvbQAKCRDdI6zXfz6zoVgJEACIqcHeP5SrGv+Bh5xoAsNL HNLu72QOTVFYICBPSTqsS9QgGvkeZErv86dheYp6MSJHuRCGu/d4Vlp6iY8YmiS0 i3Vi9Ib8sGsbC2kKJSsLnAO7d1JrDkyxYS8sSGSR0G2xKZA1dgXVqtAEdOubUU0x /HrzpP8uSoSiKflEfGtU3OykAdY8b1UBtWuC+KxVP2z5A2IAJchYQcXQ3v+kVbvT Jp+mYbYfViwb40JKFkg67hm7y494LFAMZhInzv5ImQXl1ji+C2VPGfqBdlxwgW8g +OyP0Conh6oHlEB4Wc7xfWec0PYJee9hNlXR30L+a1OCTisnOq7aHHjf6+ej7NDq KeQPEt9r8URgRMbfPvL70TRk46QeToeC07BO7aEGK3gd2C2c6ZoFmyhhauM6j2z0 eL8xK7WnynKCUrQ0tgQhv8AZkZE/Hp2ddgicyu0ARECugRiqd/uVNeip3M3TkPmV Zv0nRZzhFUk+t0DNX6krEVzvkaFznzWGDK6PGeHHbNdR58GaRnYzM0WXytYqUNGa +kryN/sj0vgzVj+ATxvDfVYqAtZMYcXvZMJQhfjNAPP89F3lHrsONf6pvD++azOM 8HugNF01zR0uZ2Z/JXPL5mZxybYlCBQdmK6QxEB+YcmJizCcnOCsWoEi1XVOGyCC /alcvvLa2DceO1lJIo0o7g== =3p6h -----END PGP SIGNATURE----- Merge tag 'pwm/for-5.2-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm Pull pwm updates from Thierry Reding: "Nothing out of the ordinary this cycle. The bulk of this is a collection of fixes for existing drivers and some cleanups. There's one new driver for i.MX SoCs and addition of support for some new variants to existing drivers" * tag 'pwm/for-5.2-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: pwm: meson: Add clock source configuration for Meson G12A dt-bindings: pwm: Update bindings for the Meson G12A Family pwm: samsung: Don't uses devm_*() functions in ->request() pwm: Clear chip_data in pwm_put() pwm: Add i.MX TPM PWM driver support dt-bindings: pwm: Add i.MX TPM PWM binding pwm: imx27: Use devm_platform_ioremap_resource() to simplify code pwm: meson: Use the spin-lock only to protect register modifications pwm: meson: Don't disable PWM when setting duty repeatedly pwm: meson: Consider 128 a valid pre-divider pwm: sysfs: fix typo "its" -> "it's" pwm: tiehrpwm: Enable compilation for ARCH_K3 dt-bindings: pwm: tiehrpwm: Add TI AM654 SoC specific compatible pwm: tiehrpwm: Update shadow register for disabling PWMs pwm: img: Turn final 'else if' into 'else' in img_pwm_config pwm: Fix deadlock warning when removing PWM device |
||
|
Linus Torvalds
|
15500c0a50 |
- New driver: Armada 37xx mailbox controller
- Misc: Use devm_ api for imx and platform_get_irq for stm32 -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEE6EwehDt/SOnwFyTyf9lkf8eYP5UFAlzTv38ACgkQf9lkf8eY P5VOQQ//d2rKhGB1GjVZQlezRa+AOLWr69cbN4mcxUvXp+PJmrcnqn1Ld7QzPXCl /Xc/2+KxtZ5WX7vtmGu45eSFiCqf2apXfDaQf89ZrtCbUKT1GBJRUvvBeCmFv4pZ bnA0PTCsHkpdvttmM2W++ZHFmgVxKOTQmtTZFsmwohJNfALkoQaw9NgKUuBKzPdI DutmXNBLXm+EkEjuIjvsKdgE63g49BTio9BRzX85+PKYmRohOa5xb05pW4KLOvOW WJ4KeUDHdWinIoedBg+FGlgWjACP3at6h3sKVqDsv76NmsCZHWjh3OV2pqQSp1ta n7HD/xPoGKNRDb+8r1CL3YLgwY4Hdvkq73koX8BGJ1jkB7LmikofGz0tnigcjrY/ D4QIPu+nIsi7hZs4S2nSMvvLWcdhUkDFa1F0hf3shYV+tPqUAFMYeG5MwMEQ4zqW KMUieCPRA4n5jiwQ3CBZgfcB+tCNJnsEkDtLoJydKNvgawpTanff7IJO2vALN64K PnIcPkHzFlbQj8lOLffCTFqqnOabkwaxeyV5r9oiT0OAg0paRBXrAo3VyVONzwqK vMAhNSygqeKudQ8EQcQS+0ymyjfSCJXa1M93lVG679VKcyVVrs0uEhjvub1abv3v Co08qKk18lsqYc55E8BzZ4T+F/mifzmEIPblM6EA9DnooSSrE/o= =rUxA -----END PGP SIGNATURE----- Merge tag 'mailbox-v5.2' of git://git.linaro.org/landing-teams/working/fujitsu/integration Pull mailbox updates from Jassi Brar: - New driver: Armada 37xx mailbox controller - Misc: Use devm_ api for imx and platform_get_irq for stm32 * tag 'mailbox-v5.2' of git://git.linaro.org/landing-teams/working/fujitsu/integration: mailbox: Add support for Armada 37xx rWTM mailbox dt-bindings: mailbox: Document armada-3700-rwtm-mailbox binding mailbox: stm32-ipcc: check invalid irq mailbox: imx: use devm_platform_ioremap_resource() to simplify code |
||
Amelie Delaunay
|
2e0b80ce45 |
dt-bindings: pinctrl: document the STMFX pinctrl bindings
This patch adds documentation of device tree bindings for the STMicroelectronics Multi-Function eXpander (STMFX) GPIO expander. Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> |
||
|
Amelie Delaunay
|
fb8c869110 |
dt-bindings: mfd: Add ST Multi-Function eXpander (STMFX) core bindings
This patch adds documentation of device tree bindings for the STMicroelectronics Multi-Function eXpander (STMFX) MFD core. Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> |
||
|
Linus Torvalds
|
ea5aee6d97 |
We have a couple new features and changes in the core clk framework this time
around because we've finally gotten around to fixing some long standing issues.
There's still work to do though, so this PR is largely laying down the
foundation for all the driver changes to come in the next merge window.
The first problem we're alleviating is how parents of clks are specified. With
the new method, we should see lots of drivers migrate away from the current
design of string comparisons on the entire clk tree to a more direct method
where they can use clk_hw pointers or more localized names specified in DT or
via clkdev. This should reduce our reliance on string comparisons for all the
topology description logic that we've been using for years and hopefully speed
some things up while avoiding problems we have with generating clk names.
Beyond that we also got rid of the CLK_IS_BASIC flag because it wasn't really
helping anyone and we introduced big-endian versions of the basic clk types so
that we can get rid of clk_{readl,writel}(). Both of these are things that
driver developers have tried to use over the years that I typically bat away
during code reviews because they're not useful. It's great to see these two
things go away so maintainers can save time not worrying about these things.
On the driver side we got the usual collection of new SoC support and
non-critical fixes and updates to existing code. The big topics that stand out
are the new driver support for Mediatek MT8183 and MT8516 SoCs, Amlogic Meson8b
and G12a SoCs, and the SiFive FU540 SoC. The other patches in the driver pile
are mostly fixes for things that are being used for the first time or additions
for clks that couldn't be tested before because there wasn't a consumer driver
that exercised them. Details are below and also in the sub-maintainer tags.
Core:
- Remove clk_readl() and introduce BE versions of basic clk types
- Rewrite how clk parents can be specified to allow DT/clkdev lookups
- Removal of the CLK_IS_BASIC clk flag
- Framework documentation updates and fixes
New Drivers:
- Support for STM32F769
- AT91 sam9x60 PMC support
- SiFive FU540 PRCI and PLL support
- Qualcomm QCS404 CDSP clk support
- Qualcomm QCS404 Turing clk support
- Mediatek MT8183 clock support
- Mediatek MT8516 clock support
- Milbeaut M10V clk controller support
- Support for Cirrus Logic Lochnagar clks
Updates:
- Rework AT91 sckc DT bindings
- Fix slow RC oscillator issue on sama5d3
- Mark UFS clk as critical on Hi-Silicon hi3660 SoCs
- Various static analysis fixes/finds and const markings
- Video Engine (ECLK) support on Aspeed SoCs
- Xilinx ZynqMP Versal platform support
- Convert Xilinx ZynqMP driver to be struct oriented
- Fixes for Rockchip rk3328 and rk3288 SoCs
- Sub-type for Rockchip SoCs where mux and divider aren't a single register
- Remove SNVS clock from i.MX7UPL clock driver and bindings
- Improve i.MX5 clock driver for i.MX50 support
- Addition of ADC clock definition for Exynos 5410 SoC (Odroid XU)
- Export a new clock for the MBUS controller on the A13
- Allwinner H6 fixes to support a finer clocking of the video and VPU engines
- Add g12a support in the Amlogic axg audio clock controller
- Add missing PCI USB clock on Rensas RZ/N1
- Add Z2 (Cortex-A53) clocks on Rensas R-Car E3 and RZ/G2E
- A new helper DIV64_U64_ROUND_CLOSEST() in <linux/math64.h>
- VPU and Video Decoder clocks on Amlogic Meson8b
- Finally remove the wrong ABP Meson8b clock id
- Add Video Decoder, PCIe PLL, and CPU Clocks on Amlogic G12A
- Re-expose SAR_ADC_SEL and CTS_OSCIN on Amlogic G12A AO clock controller
- Un-expose some Amlogic AXG-Audio input clocks IDs
-----BEGIN PGP SIGNATURE-----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=/uso
-----END PGP SIGNATURE-----
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk framework updates from Stephen Boyd:
"We have a couple new features and changes in the core clk framework
this time around because we've finally gotten around to fixing some
long standing issues. There's still work to do though, so this pull
request is largely laying down the foundation for all the driver
changes to come in the next merge window.
The first problem we're alleviating is how parents of clks are
specified. With the new method, we should see lots of drivers migrate
away from the current design of string comparisons on the entire clk
tree to a more direct method where they can use clk_hw pointers or
more localized names specified in DT or via clkdev. This should reduce
our reliance on string comparisons for all the topology description
logic that we've been using for years and hopefully speed some things
up while avoiding problems we have with generating clk names.
Beyond that we also got rid of the CLK_IS_BASIC flag because it wasn't
really helping anyone and we introduced big-endian versions of the
basic clk types so that we can get rid of clk_{readl,writel}(). Both
of these are things that driver developers have tried to use over the
years that I typically bat away during code reviews because they're
not useful. It's great to see these two things go away so maintainers
can save time not worrying about these things.
On the driver side we got the usual collection of new SoC support and
non-critical fixes and updates to existing code. The big topics that
stand out are the new driver support for Mediatek MT8183 and MT8516
SoCs, Amlogic Meson8b and G12a SoCs, and the SiFive FU540 SoC. The
other patches in the driver pile are mostly fixes for things that are
being used for the first time or additions for clks that couldn't be
tested before because there wasn't a consumer driver that exercised
them. Details are below and also in the sub-maintainer tags.
Core:
- Remove clk_readl() and introduce BE versions of basic clk types
- Rewrite how clk parents can be specified to allow DT/clkdev lookups
- Removal of the CLK_IS_BASIC clk flag
- Framework documentation updates and fixes
New Drivers:
- Support for STM32F769
- AT91 sam9x60 PMC support
- SiFive FU540 PRCI and PLL support
- Qualcomm QCS404 CDSP clk support
- Qualcomm QCS404 Turing clk support
- Mediatek MT8183 clock support
- Mediatek MT8516 clock support
- Milbeaut M10V clk controller support
- Support for Cirrus Logic Lochnagar clks
Updates:
- Rework AT91 sckc DT bindings
- Fix slow RC oscillator issue on sama5d3
- Mark UFS clk as critical on Hi-Silicon hi3660 SoCs
- Various static analysis fixes/finds and const markings
- Video Engine (ECLK) support on Aspeed SoCs
- Xilinx ZynqMP Versal platform support
- Convert Xilinx ZynqMP driver to be struct oriented
- Fixes for Rockchip rk3328 and rk3288 SoCs
- Sub-type for Rockchip SoCs where mux and divider aren't a single register
- Remove SNVS clock from i.MX7UPL clock driver and bindings
- Improve i.MX5 clock driver for i.MX50 support
- Addition of ADC clock definition for Exynos 5410 SoC (Odroid XU)
- Export a new clock for the MBUS controller on the A13
- Allwinner H6 fixes to support a finer clocking of the video and VPU engines
- Add g12a support in the Amlogic axg audio clock controller
- Add missing PCI USB clock on Rensas RZ/N1
- Add Z2 (Cortex-A53) clocks on Rensas R-Car E3 and RZ/G2E
- A new helper DIV64_U64_ROUND_CLOSEST() in <linux/math64.h>
- VPU and Video Decoder clocks on Amlogic Meson8b
- Finally remove the wrong ABP Meson8b clock id
- Add Video Decoder, PCIe PLL, and CPU Clocks on Amlogic G12A
- Re-expose SAR_ADC_SEL and CTS_OSCIN on Amlogic G12A AO clock controller
- Un-expose some Amlogic AXG-Audio input clocks IDs"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (172 commits)
clk: Cache core in clk_fetch_parent_index() without names
clk: imx: correct pfdv2 gate_bit/vld_bit operations
clk: sifive: add a driver for the SiFive FU540 PRCI IP block
clk: analogbits: add Wide-Range PLL library
clk: imx: clk-pllv3: mark expected switch fall-throughs
clk: imx8mq: Add dsi_ipg_div
clk: imx: pllv4: add fractional-N pll support
clk: sunxi-ng: Use the correct style for SPDX License Identifier
clk: sprd: Use the correct style for SPDX License Identifier
clk: renesas: Use the correct style for SPDX License Identifier
clk: qcom: Use the correct style for SPDX License Identifier
clk: davinci: Use the correct style for SPDX License Identifier
clk: actions: Use the correct style for SPDX License Identifier
clk: imx: keep uart clock on during system boot
clk: imx: correct i.MX7D AV PLL num/denom offset
dt-bindings: clk: add documentation for the SiFive PRCI driver
clk: stm32mp1: Add ddrperfm clock
clk: Remove CLK_IS_BASIC clk flag
clock: milbeaut: Add Milbeaut M10V clock controller
dt-bindings: clock: milbeaut: add Milbeaut clock description
...
|
||
|
Linus Torvalds
|
8e4ff713ce |
RTC for 5.2
Subsystem:
- set_mmss and set_mmss64 rtc_ops removal
- Fix timestamp value for RTC_TIMESTAMP_BEGIN_1900
- Use SPDX identifier for the core
- validate upper bound of tm->tm_year
New driver:
- Aspeed BMC SoC RTC
Drivers:
- abx80x: use rtc_add_group
- ds3232: nvram support
- pcf85063: add alarm, nvram, offset correction and microcrystal rv8263 support
- x1205: add of_match_table
- Use set_time instead of set_mms/set_mmss64 for: ab3100, coh901331, digicolor,
ds1672, ds2404, ep93xx, imxdi, jz4740, lpc32xx, mc13xxx, mxc, pcap, stmp3xxx,
test, wm831x, xgene.
- Set RTC range for: ab3100, at91sam9, coh901331, da9063, digicolor, dm355evm,
ds1672, ds2404, ep39xx, goldfish, imxdi, jz4740, lpc32xx, mc13xxx, mv, mxc,
omap, pcap, pcf85063, pcf85363, ps3, sh, stmp3xxx, sun4v, tegra, wm831x,
xgene.
- Switch to rtc_time64_to_tm/rtc_tm_to_time64 for the driver that properly set
the RTC range.
- Use dev_get_drvdata instead of multiple indirections.
-----BEGIN PGP SIGNATURE-----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=NyAx
-----END PGP SIGNATURE-----
Merge tag 'rtc-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
Pull RTC updates from Alexandre Belloni:
"A huge series from me this cycle. I went through many drivers to set
the date and time range supported by the RTC which helps solving HW
limitation when the time comes (as early as next year for some). This
time, I focused on drivers using .set_mms and .set_mmss64, allowing me
to remove those callbacks. About a third of the patches got reviews, I
actually own the RTCs and I tested another third and the remaining one
are unlikely to cause any issues.
Other than that, a single new driver and the usual fixes here and there.
Summary:
Subsystem:
- set_mmss and set_mmss64 rtc_ops removal
- Fix timestamp value for RTC_TIMESTAMP_BEGIN_1900
- Use SPDX identifier for the core
- validate upper bound of tm->tm_year
New driver:
- Aspeed BMC SoC RTC
Drivers:
- abx80x: use rtc_add_group
- ds3232: nvram support
- pcf85063: add alarm, nvram, offset correction and microcrystal
rv8263 support
- x1205: add of_match_table
- Use set_time instead of set_mms/set_mmss64 for: ab3100, coh901331,
digicolor, ds1672, ds2404, ep93xx, imxdi, jz4740, lpc32xx, mc13xxx,
mxc, pcap, stmp3xxx, test, wm831x, xgene.
- Set RTC range for: ab3100, at91sam9, coh901331, da9063, digicolor,
dm355evm, ds1672, ds2404, ep39xx, goldfish, imxdi, jz4740, lpc32xx,
mc13xxx, mv, mxc, omap, pcap, pcf85063, pcf85363, ps3, sh,
stmp3xxx, sun4v, tegra, wm831x, xgene.
- Switch to rtc_time64_to_tm/rtc_tm_to_time64 for the driver that
properly set the RTC range.
- Use dev_get_drvdata instead of multiple indirections"
* tag 'rtc-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (177 commits)
rtc: snvs: Use __maybe_unused instead of #if CONFIG_PM_SLEEP
rtc: imxdi: remove unused variable
rtc: drop set_mms and set_mmss64
rtc: pcap: convert to SPDX identifier
rtc: pcap: use .set_time
rtc: pcap: switch to rtc_time64_to_tm/rtc_tm_to_time64
rtc: pcap: set range
rtc: digicolor: convert to SPDX identifier
rtc: digicolor: use .set_time
rtc: digicolor: set range
rtc: digicolor: fix possible race condition
rtc: jz4740: convert to SPDX identifier
rtc: jz4740: rework invalid time detection
rtc: jz4740: use dev_pm_set_wake_irq() to simplify code
rtc: jz4740: use .set_time
rtc: jz4740: remove useless check
rtc: jz4740: switch to rtc_time64_to_tm/rtc_tm_to_time64
rtc: jz4740: set range
rtc: 88pm860x: prevent use-after-free on device remove
rtc: Use dev_get_drvdata()
...
|
||
|
Linus Torvalds
|
45182e4e1f |
Merge branch 'i2c/for-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang: - API for late atomic transfers (e.g. to shut down via PMIC). We have a seperate callback now which is called under clearly defined conditions. In-kernel users are converted, too. - new driver for the AMD PCIe MP2 I2C controller - large refactoring for at91 and bcm-iproc (both gain slave support due to this) - and a good share of various driver improvements anf fixes * 'i2c/for-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (57 commits) dt-bindings: i2c: riic: document r7s9210 support i2c: imx-lpi2c: Use __maybe_unused instead of #if CONFIG_PM_SLEEP i2c-piix4: Add Hygon Dhyana SMBus support i2c: core: apply 'is_suspended' check for SMBus, too i2c: core: ratelimit 'transfer when suspended' errors i2c: iproc: Change driver to use 'BIT' macro i2c: riic: Add Runtime PM support i2c: mux: demux-pinctrl: use struct_size() in devm_kzalloc() i2c: mux: pca954x: allow management of device idle state via sysfs i2c: mux: pca9541: remove support for unused platform data i2c: mux: pca954x: remove support for unused platform data dt-bindings: i2c: i2c-mtk: add support for MT8516 i2c: axxia: use auto cmd for last message i2c: gpio: flag atomic capability if possible i2c: algo: bit: add flag to whitelist atomic transfers i2c: stu300: use xfer_atomic callback to bail out early i2c: ocores: enable atomic xfers i2c: ocores: refactor setup for polling i2c: tegra-bpmp: convert to use new atomic callbacks i2c: omap: Add the master_xfer_atomic hook ... |
||
|
Linus Torvalds
|
055128ee00 |
dmaengine updates for v5.2-rc1
- Updates to stm32 dma residue calculations
- Interleave dma capability to axi-dmac and
support for ZynqMP arch
- Rework of channel assignment for rcar dma
- Debugfs for pl330 driver
- Support for Tegra186/Tegra194, refactoring for new chips
and support for pause/resume
- Updates to axi-dmac, bcm2835, fsl-edma, idma64, imx-sdma,
rcar-dmac, stm32-dma etc
- dev_get_drvdata() updates on few drivers
-----BEGIN PGP SIGNATURE-----
iQIcBAABAgAGBQJc08p1AAoJEHwUBw8lI4NHD14QAJGU7MOc9dpr+qtm2k3sNO3o
EXZtb3GjTs4MUt6EfMA47KXsxeq4UhubQqM7CmPngDyjXaPd4JBE8bwAd+OzS9sq
eAPMa+M1g8MehuQcdUzB/y6APoSFhGvFoGLY8e7FeI6fwYNm3Yy2gTSiZfpMb3MW
hclJQe+UWfppUHOig13tr0tbQ31DOa7qb2+roVJqDEb9sQ5bDkhRWXjElfoeSXsS
n8nNh4GZr5RkIxfzslVRZNfqb1lja2e03SXBsN9faQI7BfIYBM+9hWSYd4Nq8uYo
xvhYf9gJnKVKtFrwdXtyeBJ80DijWBoodhLrLOfhEYYOrCl9WwJT9AepIOdvij32
11FwjCbkC9ASQ1cSLyRUBbdmfykSlBvdbAMwJc1y9qK7k9BMba3rXRJfimlRy29A
Cpsu4tZKoPlZRGinoGnEGreg1YZI1YHwa+hlkW/8V9Zkb2hvIUbbXr7xHedJf7n4
gIb5DnCF5pC1umB/o7pj2YXrYBc9GETp3sDQ88aw1owKh1T2pZcc5HOpi4p7/7n+
b2HM0cWOCM3aKwdOcONk0jd87FcYQm3g1isQF5SCOtOys8Uy6wNqo9aRrfE/94aw
4SiGRq9/nSOHDh72mD3Ux7v47/cFjWGzZZJVy5+NC+Mq79KxgpXOjsIr7YVbcn9m
GuUdiDZmUvZ4y+qq/uCI
=JDU6
-----END PGP SIGNATURE-----
Merge tag 'dmaengine-5.2-rc1' of git://git.infradead.org/users/vkoul/slave-dma
Pull dmaengine updates from Vinod Koul:
- Updates to stm32 dma residue calculations
- Interleave dma capability to axi-dmac and support for ZynqMP arch
- Rework of channel assignment for rcar dma
- Debugfs for pl330 driver
- Support for Tegra186/Tegra194, refactoring for new chips and support
for pause/resume
- Updates to axi-dmac, bcm2835, fsl-edma, idma64, imx-sdma, rcar-dmac,
stm32-dma etc
- dev_get_drvdata() updates on few drivers
* tag 'dmaengine-5.2-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (34 commits)
dmaengine: tegra210-adma: restore channel status
dmaengine: tegra210-dma: free dma controller in remove()
dmaengine: tegra210-adma: add pause/resume support
dmaengine: tegra210-adma: add support for Tegra186/Tegra194
Documentation: DT: Add compatibility binding for Tegra186
dmaengine: tegra210-adma: prepare for supporting newer Tegra chips
dmaengine: at_xdmac: remove a stray bottom half unlock
dmaengine: fsl-edma: Adjust indentation
dmaengine: fsl-edma: Fix typo in Vybrid name
dmaengine: stm32-dma: fix residue calculation in stm32-dma
dmaengine: nbpfaxi: Use dev_get_drvdata()
dmaengine: bcm-sba-raid: Use dev_get_drvdata()
dmaengine: stm32-dma: Fix unsigned variable compared with zero
dmaengine: stm32-dma: use platform_get_irq()
dmaengine: rcar-dmac: Update copyright information
dmaengine: imx-sdma: Only check ratio on parts that support 1:1
dmaengine: xgene-dma: fix spelling mistake "descripto" -> "descriptor"
dmaengine: idma64: Move driver name to the header
dmaengine: bcm2835: Drop duplicate capability setting.
dmaengine: pl330: _stop: clear interrupt status
...
|
||
Neil Armstrong
|
ad36cb9186 |
dt-bindings: pwm: Update bindings for the Meson G12A Family
Update the doc to explicitly support Meson G12A Family. The 2 first (A & B) AO PWM uses different clock source than the last 2 (C & D) AO PWM modules, thus we need to differentiate them. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Thierry Reding <thierry.reding@gmail.com> |
||
|
Linus Torvalds
|
e57ccca1ba |
sound updates for 5.2-rc1
The most significant changes at this cycle are the Sound Open Firmware
support from Intel for the common DSP framework along with its support
for Intel platforms. It's a door opened to a real "free" firmware (in
the sense of FOSS), and other parties show interests in it.
In addition to SOF, we've got a bunch of updates and fixes as usual.
Some highlights are below.
ALSA core:
- Cleanups and fixes in ALSA timer code to cover some races spotted
by syzkaller
- Cleanups and fixes in ALSA sequencer code to cover some races,
again unsurprisingly, spotted by syzkaller
- Optimize the common page allocation helper with alloc_pages_exact()
ASoC:
- Add SOF core support, as well as Intel SOF platform support
- Generic card driver improvements: support for MCLK/sample rate
ratio and pin switches
- A big set of improvements to TLV320AIC32x4 drivers
- New drivers for Freescale audio mixers, several Intel machines,
several Mediatek machines, Meson G12A, Spreadtrum compressed audio
and DMA devices
HD-audio:
- A few Realtek codec fixes for reducing pop noises
- Quirks for Chromebooks
- Workaround for faulty connection report on AMD/Nvidia HDMI
Others:
- A quirk for Focusrite Scarlett Solo USB-audio
- Add support for MOTU 8pre FireWire
- 24bit sample format support in aloop
- GUS patch format support (finally, over a decade) in native
emux synth code
-----BEGIN PGP SIGNATURE-----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=0tyg
-----END PGP SIGNATURE-----
Merge tag 'sound-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"The most significant changes at this cycle are the Sound Open Firmware
support from Intel for the common DSP framework along with its support
for Intel platforms. It's a door opened to a real "free" firmware (in
the sense of FOSS), and other parties show interests in it.
In addition to SOF, we've got a bunch of updates and fixes as usual.
Some highlights are below.
ALSA core:
- Cleanups and fixes in ALSA timer code to cover some races spotted
by syzkaller
- Cleanups and fixes in ALSA sequencer code to cover some races,
again unsurprisingly, spotted by syzkaller
- Optimize the common page allocation helper with alloc_pages_exact()
ASoC:
- Add SOF core support, as well as Intel SOF platform support
- Generic card driver improvements: support for MCLK/sample rate
ratio and pin switches
- A big set of improvements to TLV320AIC32x4 drivers
- New drivers for Freescale audio mixers, several Intel machines,
several Mediatek machines, Meson G12A, Spreadtrum compressed audio
and DMA devices
HD-audio:
- A few Realtek codec fixes for reducing pop noises
- Quirks for Chromebooks
- Workaround for faulty connection report on AMD/Nvidia HDMI
Others:
- A quirk for Focusrite Scarlett Solo USB-audio
- Add support for MOTU 8pre FireWire
- 24bit sample format support in aloop
- GUS patch format support (finally, over a decade) in native emux
synth code"
* tag 'sound-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (375 commits)
ASoC: SOF: Fix unused variable warnings
ALSA: line6: toneport: Fix broken usage of timer for delayed execution
ALSA: aica: Fix a long-time build breakage
ALSA: hda/realtek - Support low power consumption for ALC256
ASoC: stm32: i2s: update pcm hardware constraints
ASoC: codec: hdac_hdmi: no checking monitor in hw_params
ASoC: mediatek: mt6358: save PGA for mixer control
ASoC: mediatek: mt6358: save output volume for mixer controls
ASoC: mediatek: mt6358: initialize setting when ramping volume
ASoC: SOF: core: fix undefined nocodec reference
ASoC: SOF: xtensa: fix undefined references
ASoC: SOF: Propagate sof_get_ctrl_copy_params() error properly
ALSA: hdea/realtek - Headset fixup for System76 Gazelle (gaze14)
ALSA: hda/intel: add CometLake PCI IDs
ALSA: hda/realtek - Support low power consumption for ALC295
ASoC: rockchip: Fix an uninitialized variable compile warning
ASoC: SOF: Fix a compile warning with CONFIG_PCI=n
ASoC: da7219: Fix a compile warning at CONFIG_COMMON_CLK=n
ASoC: sound/soc/sof/: fix kconfig dependency warning
ASoC: stm32: spdifrx: change trace level on iec control
...
|
||
Anson Huang
|
2caf038436 |
dt-bindings: pwm: Add i.MX TPM PWM binding
Add i.MX TPM(Low Power Timer/Pulse Width Modulation Module) PWM binding. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Thierry Reding <thierry.reding@gmail.com> |
||
Marek Behun
|
004c35cd8e |
dt-bindings: mailbox: Document armada-3700-rwtm-mailbox binding
This adds device tree binding documentation for the rWTM BIU mailbox driver on the Armada 37xx SOC (EspressoBin, Turris Mox). Signed-off-by: Marek Behun <marek.behun@nic.cz> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org> |
||
|
Linus Torvalds
|
a2d635decb |
drm pull request for 5.2
-----BEGIN PGP SIGNATURE----- iQIcBAABAgAGBQJc04M6AAoJEAx081l5xIa+SJgP/0uIgIOM53vPpydgmr+2IEHF jbDqrd+mipgNriRVHjDsWdUHCUNtyhB7YEBCMrj3mY0rRFI7FlQQf4lOwYGoHiKP 4JZg4kwC37997lFXl1uabGj3DmJLtxKL2/D15zCH/uLe+2EDzWznP6NVdFT3WK0P YKZQCWT19PWSsLoBRPutWxkmop4AYvkqE0a6vXUlJlFYZK3Bbytx6/179uWKfiX5 ZkKEEtx1XiDAvcp5gBb6PISurycrBY0e/bkPBnK3ES5vawMbTU5IrmWOrQ4D8yOd z9qOVZawZ6+b2XBDgBWjQ9bM7I5R7Il1q/LglYEaFI9+wHUnlUdDSm6ft5/5BiCZ fqgkh5Bj2iEsajbSsacoljMOpxpYPqj63mqc+7fAGXF34V+B+9U1bpt8kCbMKowf 7Abb7IuiCR6vLDapjP6VqTMvdQ4O466OEAN83ULGFTdmMqYYH4AxaIwc+xcAk/aP RNq7/RHhh4FRynRAj9fCkGlF3ArnM88gLINwWuEQq4SClWGcvdw7eaHpwWo77c4g iccCnTLqSIg5pDVu07AQzzBlW6KulWxh5o72x+Xx+EXWdYUDHQ1SlNs11bSNUBV1 5MkrzY2GuD+NFEjsXJEDIPOr40mQOyJCXnxq8nXPsz/hD9kHeJPvWn3J3eVKyb5B Z6/knNqM0BDn3SaYR/rD =YFiQ -----END PGP SIGNATURE----- Merge tag 'drm-next-2019-05-09' of git://anongit.freedesktop.org/drm/drm Pull drm updates from Dave Airlie: "This has two exciting community drivers for ARM Mali accelerators. Since ARM has never been open source friendly on the GPU side of the house, the community has had to create open source drivers for the Mali GPUs. Lima covers the older t4xx and panfrost the newer 6xx/7xx series. Well done to all involved and hopefully this will help ARM head in the right direction. There is also now the ability if you don't have any of the legacy drivers enabled (pre-KMS) to remove all the pre-KMS support code from the core drm, this saves 10% or so in codesize on my machine. i915 also enable Icelake/Elkhart Lake Gen11 GPUs by default, vboxvideo moves out of staging. There are also some rcar-du patches which crossover with media tree but all should be acked by Mauro. Summary: uapi changes: - Colorspace connector property - fourcc - new YUV formts - timeline sync objects initially merged - expose FB_DAMAGE_CLIPS to atomic userspace new drivers: - vboxvideo: moved out of staging - aspeed: ASPEED SoC BMC chip display support - lima: ARM Mali4xx GPU acceleration driver support - panfrost: ARM Mali6xx/7xx Midgard/Bitfrost acceleration driver support core: - component helper docs - unplugging fixes - devm device init - MIPI/DSI rate control - shmem backed gem objects - connector, display_info, edid_quirks cleanups - dma_buf fence chain support - 64-bit dma-fence seqno comparison fixes - move initial fb config code to core - gem fence array helpers for Lima - ability to remove legacy support code if no drivers requires it (removes 10% of drm.ko size) - lease fixes ttm: - unified DRM_FILE_PAGE_OFFSET handling - Account for kernel allocations in kernel zone only panel: - OSD070T1718-19TS panel support - panel-tpo-td028ttec1 backlight support - Ronbo RB070D30 MIPI/DSI - Feiyang FY07024DI26A30-D MIPI-DSI panel - Rocktech jh057n00900 MIPI-DSI panel i915: - Comet Lake (Gen9) PCI IDs - Updated Icelake PCI IDs - Elkhartlake (Gen11) support - DP MST property addtions - plane and watermark fixes - Icelake port sync and VEBOX disable fixes - struct_mutex usage reduction - Icelake gamma fix - GuC reset fixes - make mmap more asynchronous - sound display power well race fixes - DDI/MIPI-DSI clocks for Icelake - Icelake RPS frequency changing support - Icelake workarounds amdgpu: - Use HMM for userptr - vega20 experimental smu11 support - RAS support for vega20 - BACO support for vega12 + fixes for vega20 - reworked IH interrupt handling - amdkfd RAS support - Freesync improvements - initial timeline sync object support - DC Z ordering fixes - NV12 planes support - colorspace properties for planes= - eDP opts if eDP already initialized nouveau: - misc fixes etnaviv: - misc fixes msm: - GPU zap shader support expansion - robustness ABI addition exynos: - Logging cleanups tegra: - Shared reset fix - CPU cache maintenance fix cirrus: - driver rewritten using simple helpers meson: - G12A support vmwgfx: - Resource dirtying management improvements - Userspace logging improvements virtio: - PRIME fixes rockchip: - rk3066 hdmi support sun4i: - DSI burst mode support vc4: - load tracker to detect underflow v3d: - v3d v4.2 support malidp: - initial Mali D71 support in komeda driver tfp410: - omap related improvement omapdrm: - drm bridge/panel support - drop some omap specific panels rcar-du: - Display writeback support" * tag 'drm-next-2019-05-09' of git://anongit.freedesktop.org/drm/drm: (1507 commits) drm/msm/a6xx: No zap shader is not an error drm/cma-helper: Fix drm_gem_cma_free_object() drm: Fix timestamp docs for variable refresh properties. drm/komeda: Mark the local functions as static drm/komeda: Fixed warning: Function parameter or member not described drm/komeda: Expose bus_width to Komeda-CORE drm/komeda: Add sysfs attribute: core_id and config_id drm: add non-desktop quirk for Valve HMDs drm/panfrost: Show stored feature registers drm/panfrost: Don't scream about deferred probe drm/panfrost: Disable PM on probe failure drm/panfrost: Set DMA masks earlier drm/panfrost: Add sanity checks to submit IOCTL drm/etnaviv: initialize idle mask before querying the HW db drm: introduce a capability flag for syncobj timeline support drm: report consistent errors when checking syncobj capibility drm/nouveau/nouveau: forward error generated while resuming objects tree drm/nouveau/fb/ramgk104: fix spelling mistake "sucessfully" -> "successfully" drm/nouveau/i2c: Disable i2c bus access after ->fini() drm/nouveau: Remove duplicate ACPI_VIDEO_NOTIFY_PROBE definition ... |
||
|
Linus Torvalds
|
e7a1414f9d |
media updates for v5.1-rc1
-----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEE+QmuaPwR3wnBdVwACF8+vY7k4RUFAlzTElIACgkQCF8+vY7k 4RV9DA//cnvJqEHWFRrRdM1YpyVeo8CWk4nNFu174f2VFFS3O32WuSMLGVtXI8Sq Kx9/hZtb20TN9D90V6TtGqH9x5k7qpdlYkGD4ZQFbokRYhzk1eJ7ZRkPfxNDPo7P hcRqN1njXWjQN61ekEbOsMXavbcB52D+ubtDaE+8stcn00HGQ8cIjNzzmi5VYlrs DSJNB6udrePhWgQGhmzdhN1x12+xeu6OSNx6xsUZ2paHHzbTNnrnFs2gc6vqXFAk HEkows3DKHk8y7vK85Fgwjm3L3PQbvWmrDvbbOLjNVegzCop65oK42UlaHJHLlgs BVE9SI9/5wHJMVKDf0IIVSA7GsWTqcA+nBC3rohWse2UZp+8691gGynQOvr7Z4wx T3ZKUIG3swX1yN8gUl8EVHv4jogD4xlog5SFanx1DJfkvwTnT5VfJZqryXBPP2lG knMxc6z7qmP8F2BLTXd2UxEujMA75RoSg2UKoJZHv3cu+zPSFjGVfCwahPdnNoeb FMaVDDayzk6eD8/joO0EM89bg1wj4vPEr/74SyNbHHOzIYfIs3fvHD2+p/KYsAeu /wQXGlK2ARTKSDgyCKq8OGY+mtuJTI5kkV/EVLnEa9kNEeFDdsRM1h8Y4y8UX0Ds 7PlAyQXPTixOW+1C2pxfzbJi4Bv6hjX2ijgjmE2CSn4zPJZ9qK4= =zjhI -----END PGP SIGNATURE----- Merge tag 'media/v5.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - remove the deprecated Zoran driver from staging - new I2C driver: ST MIPID02 CSI-2 camera bridge - new platform driver: Amlogic Meson AO CEC G12A Controller - add support for USB audio via the media controller - au0828 driver is now supported via the media controller on both on media and on usbaudio - new kernel test for the media device allocator - add support for stateless decoder at vicodec driver - lots of other driver improvements fixes and cleanups * tag 'media/v5.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (218 commits) media: dt-bindings: aspeed-video: Add missing memory-region property media: platform: Aspeed: Make reserved memory optional media: platform: Aspeed: Remove use of reset line media: stm32-dcmi: return appropriate error codes during probe media: vsp1: Add support for missing 16-bit RGB555 formats media: vsp1: Add support for missing 16-bit RGB444 formats media: vsp1: Add support for missing 32-bit RGB formats media: v4l: Add definitions for missing 16-bit RGB555 formats media: v4l: Add definitions for missing 16-bit RGB4444 formats media: v4l: Add definitions for missing 32-bit RGB formats media: zoran: remove deprecated driver media: MAINTAINERS: Update AO CEC with ao-cec-g12a driver media: platform: meson: Add Amlogic Meson G12A AO CEC Controller driver media: dt-bindings: media: meson-ao-cec: Add G12A AO-CEC-B Compatible media: cros-ec-cec: decrement HDMI device refcount media: seco-cec: decrement HDMI device refcount media: tegra_cec: use new cec_notifier_parse_hdmi_phandle helper media: stih_cec: use new cec_notifier_parse_hdmi_phandle helper media: s5p_cec: use new cec_notifier_parse_hdmi_phandle helper media: meson: ao-cec: use new cec_notifier_parse_hdmi_phandle helper ... |
||
|
Linus Torvalds
|
fe460a6df6 |
Pin control changes for v5.2:
Nex drivers:
- New driver for Bitmain BM1880 pin controller
- New driver for Mediatek MT8516
- New driver for Cirrus Logich Lochnagar PMIC pins
Updates:
- Incremental development on Renesas SH-PFC
- Incremental development on Intel pin controller and some
particular updates for Cedarfork.
- Pin configuration support in Allwinner SunXi drivers
- Suspend/resume support in the NXP/Freescale i.MX8MQ driver
- Support for more packaging of the ST Micro STM32
-----BEGIN PGP SIGNATURE-----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=ovk5
-----END PGP SIGNATURE-----
Merge tag 'pinctrl-v5.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"It is pretty calm and chill in pin control for the moment. Just
incremental development.
There is an odd patch to the Super-H architecture, it's coming from
the maintainers so should be fine.
Summary:
New drivers:
- Bitmain BM1880 pin controller
- Mediatek MT8516
- Cirrus Logich Lochnagar PMIC pins
Updates:
- Incremental development on Renesas SH-PFC
- Incremental development on Intel pin controller and some particular
updates for Cedarfork.
- Pin configuration support in Allwinner SunXi drivers
- Suspend/resume support in the NXP/Freescale i.MX8MQ driver
- Support for more packaging of the ST Micro STM32"
* tag 'pinctrl-v5.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (72 commits)
pinctrl: mcp23s08: Do not complain about unsupported params
pinctrl: Rework Kconfig dependency for BM1880 pinctrl driver
MAINTAINERS: Add entry for BM1880 pinctrl
pinctrl: Add pinctrl support for BM1880 SoC
dt-bindings: pinctrl: Add BM1880 pinctrl binding
pinctrl: stm32: check irq controller availability at probe
pinctrl: mediatek: Add MT8516 Pinctrl driver
pinctrl: zte: fix leaked of_node references
pinctrl: intel: Increase readability of intel_gpio_update_pad_mode()
pinctrl: intel: Retain HOSTSW_OWN for requested gpio pin
pinctrl: pistachio: fix leaked of_node references
pinctrl: sunxi: Support I/O bias voltage setting on H6
pinctrl: sunxi: Prepare for alternative bias voltage setting methods
pinctrl: st: fix leaked of_node references
pinctrl: samsung: fix leaked of_node references
pinctrl: stm32: align stm32mp157 pin names
pinctrl: stm32: add package information for stm32mp157c
pinctrl: stm32: introduce package support
dt-bindings: pinctrl: stm32: add new entry for package information
pinctrl: imx8mq: Add suspend/resume ops
...
|
||
|
Linus Torvalds
|
d1cd7c85f9 |
SCSI misc on 20190507
This is mostly update of the usual drivers: qla2xxx, qedf, smartpqi, hpsa, lpfc, ufs, mpt3sas, ibmvfc and hisi_sas. Plus number of minor changes, spelling fixes and other trivia. Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com> -----BEGIN PGP SIGNATURE----- iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCXNIK0yYcamFtZXMuYm90 dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishbeFAP4wsOm6 BNqDvLbF7gHAH+oSVAeENd9tepXG2xKbUHmLRgEA1wPaUxon8L8v/SSsqwewqMXP y6CnU6aO2iaViTNBsPs= =RX74 -----END PGP SIGNATURE----- Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI updates from James Bottomley: "This is mostly update of the usual drivers: qla2xxx, qedf, smartpqi, hpsa, lpfc, ufs, mpt3sas, ibmvfc and hisi_sas. Plus number of minor changes, spelling fixes and other trivia" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (298 commits) scsi: qla2xxx: Avoid that lockdep complains about unsafe locking in tcm_qla2xxx_close_session() scsi: qla2xxx: Avoid that qlt_send_resp_ctio() corrupts memory scsi: qla2xxx: Fix hardirq-unsafe locking scsi: qla2xxx: Complain loudly about reference count underflow scsi: qla2xxx: Use __le64 instead of uint32_t[2] for sending DMA addresses to firmware scsi: qla2xxx: Introduce the dsd32 and dsd64 data structures scsi: qla2xxx: Check the size of firmware data structures at compile time scsi: qla2xxx: Pass little-endian values to the firmware scsi: qla2xxx: Fix race conditions in the code for aborting SCSI commands scsi: qla2xxx: Use an on-stack completion in qla24xx_control_vp() scsi: qla2xxx: Make qla24xx_async_abort_cmd() static scsi: qla2xxx: Remove unnecessary locking from the target code scsi: qla2xxx: Remove qla_tgt_cmd.released scsi: qla2xxx: Complain if a command is released that is owned by the firmware scsi: qla2xxx: target: Fix offline port handling and host reset handling scsi: qla2xxx: Fix abort handling in tcm_qla2xxx_write_pending() scsi: qla2xxx: Fix error handling in qlt_alloc_qfull_cmd() scsi: qla2xxx: Simplify qlt_send_term_imm_notif() scsi: qla2xxx: Fix use-after-free issues in qla2xxx_qpair_sp_free_dma() scsi: qla2xxx: Fix a qla24xx_enable_msix() error path ... |
||
|
Linus Torvalds
|
b3a5e648f5 |
TTY/Serial patches for 5.2-rc1
Here is the "big" set of tty/serial driver patches for 5.2-rc1. It's really pretty small, not much happening in this portion of the kernel at the moment. When the "highlight" is the movement of the documentation from .txt to .rst files, it's a good merge window. There's a number of small fixes and updates over the various serial drivers, and a new "tty null" driver for those embedded systems that like to make things even smaller and not break things. All of these have been in linux-next for a while with no reported issues. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXNKvrw8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+ynR2wCfTrWM9Qm7oA1hgWeYZiLTrnYnOtsAoK4a629W o7AAyVf8RJ4jdWaSgOqx =9Dy/ -----END PGP SIGNATURE----- Merge tag 'tty-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial updates from Greg KH: "Here is the "big" set of tty/serial driver patches for 5.2-rc1. It's really pretty small, not much happening in this portion of the kernel at the moment. When the "highlight" is the movement of the documentation from .txt to .rst files, it's a good merge window. There's a number of small fixes and updates over the various serial drivers, and a new "tty null" driver for those embedded systems that like to make things even smaller and not break things. All of these have been in linux-next for a while with no reported issues" * tag 'tty-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (45 commits) tty: serial: add driver for the SiFive UART dt-bindings: serial: add documentation for the SiFive UART driver serial: uartps: Add support for cts-override dt-bindings: xilinx-uartps: Add support for cts-override serial: milbeaut_usio: Fix error handling in probe and remove tty: rocket: deprecate the rp_ioctl tty: rocket: Remove RCPK_GET_STRUCT ioctl tty: update obsolete termios comment tty: serial_core: fix error code returned by uart_register_driver() serial: 8250-mtk: modify baudrate setting serial: 8250-mtk: add follow control docs: serial: convert docs to ReST and rename to *.rst serial: 8250_exar: Adjust IOT2000 matching TTY: serial_core, add ->install serial: Fix using plain integer instead of Null pointer tty:serial_core: Spelling mistake tty: Add NULL TTY driver tty: vt: keyboard: Allow Unicode compose base char Revert "tty: fix NULL pointer issue when tty_port ops is not set" serial: Add Milbeaut serial control ... |
||
|
Linus Torvalds
|
132d68d37d |
USB/PHY patches for 5.2-rc1
Here is the big set of USB and PHY driver patches for 5.2-rc1 There is the usual set of: - USB gadget updates - PHY driver updates and additions - USB serial driver updates and fixes - typec updates and new chips supported - mtu3 driver updates - xhci driver updates - other tiny driver updates Nothing really interesting, just constant forward progress. All of these have been in linux-next for a while with no reported issues. The usb-gadget and usb-serial trees were merged a bit "late", but both of them had been in linux-next before they got merged here last Friday. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXNKuwg8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+ymRUgCfa8Ri7KrCaBR5NHQcLhbdrX90ToQAmgNw7vpo fqt0XpNM0CSa9O/gOr79 =8HFh -----END PGP SIGNATURE----- Merge tag 'usb-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB/PHY updates from Greg KH: "Here is the big set of USB and PHY driver patches for 5.2-rc1 There is the usual set of: - USB gadget updates - PHY driver updates and additions - USB serial driver updates and fixes - typec updates and new chips supported - mtu3 driver updates - xhci driver updates - other tiny driver updates Nothing really interesting, just constant forward progress. All of these have been in linux-next for a while with no reported issues. The usb-gadget and usb-serial trees were merged a bit "late", but both of them had been in linux-next before they got merged here last Friday" * tag 'usb-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (206 commits) USB: serial: f81232: implement break control USB: serial: f81232: add high baud rate support USB: serial: f81232: clear overrun flag USB: serial: f81232: fix interrupt worker not stop usb: dwc3: Rename DWC3_DCTL_LPM_ERRATA usb: dwc3: Fix default lpm_nyet_threshold value usb: dwc3: debug: Print GET_STATUS(device) tracepoint usb: dwc3: Do core validation early on probe usb: dwc3: gadget: Set lpm_capable usb: gadget: atmel: tie wake lock to running clock usb: gadget: atmel: support USB suspend usb: gadget: atmel_usba_udc: simplify setting of interrupt-enabled mask dwc2: gadget: Fix completed transfer size calculation in DDMA usb: dwc2: Set lpm mode parameters depend on HW configuration usb: dwc2: Fix channel disable flow usb: dwc2: Set actual frame number for completed ISOC transfer usb: gadget: do not use __constant_cpu_to_le16 usb: dwc2: gadget: Increase descriptors count for ISOC's usb: introduce usb_ep_type_string() function usb: dwc3: move synchronize_irq() out of the spinlock protected block ... |
||
Dmitry Osipenko
|
c63217a462 |
dt-bindings: mfd: max77620: Add system-power-controller property
Document new generic property that designates the PMIC as the system's power controller. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> |
||
|
Dmitry Osipenko
|
56076a5385 |
dt-bindings: mfd: max77620: Add compatible for Maxim 77663
Maxim 77663 has a few minor differences in regards to hardware interface and available capabilities by comparing it with 77620 and 20024 models, hence re-use 77620 device-tree binding for the 77663. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> |
||
Bartosz Golaszewski
|
93fb61e2c3 |
dt-bindings: input: Add DT bindings for max77650
Add the DT binding document for the onkey module of max77650. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> |
||
|
Bartosz Golaszewski
|
5a032b0697 |
dt-bindings: leds: Add DT bindings for max77650
Add the DT binding document for the LEDs module of max77650. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Reviewed-by: Rob Herring <robh@kernel.org> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Lee Jones <lee.jones@linaro.org> |
||
|
Bartosz Golaszewski
|
424ece627c |
dt-bindings: power: supply: Add DT bindings for max77650
Add the DT binding document for the battery charger module of max77650. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> |
||
|
Bartosz Golaszewski
|
13a22f7331 |
dt-bindings: mfd: Add DT bindings for max77650
Add a DT binding document for max77650 ultra-low power PMIC. This describes the core mfd device and the GPIO module. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Reviewed-by: Rob Herring <robh@kernel.org> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Lee Jones <lee.jones@linaro.org> |
||
|
Linus Torvalds
|
80f232121b |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking updates from David Miller:
"Highlights:
1) Support AES128-CCM ciphers in kTLS, from Vakul Garg.
2) Add fib_sync_mem to control the amount of dirty memory we allow to
queue up between synchronize RCU calls, from David Ahern.
3) Make flow classifier more lockless, from Vlad Buslov.
4) Add PHY downshift support to aquantia driver, from Heiner
Kallweit.
5) Add SKB cache for TCP rx and tx, from Eric Dumazet. This reduces
contention on SLAB spinlocks in heavy RPC workloads.
6) Partial GSO offload support in XFRM, from Boris Pismenny.
7) Add fast link down support to ethtool, from Heiner Kallweit.
8) Use siphash for IP ID generator, from Eric Dumazet.
9) Pull nexthops even further out from ipv4/ipv6 routes and FIB
entries, from David Ahern.
10) Move skb->xmit_more into a per-cpu variable, from Florian
Westphal.
11) Improve eBPF verifier speed and increase maximum program size,
from Alexei Starovoitov.
12) Eliminate per-bucket spinlocks in rhashtable, and instead use bit
spinlocks. From Neil Brown.
13) Allow tunneling with GUE encap in ipvs, from Jacky Hu.
14) Improve link partner cap detection in generic PHY code, from
Heiner Kallweit.
15) Add layer 2 encap support to bpf_skb_adjust_room(), from Alan
Maguire.
16) Remove SKB list implementation assumptions in SCTP, your's truly.
17) Various cleanups, optimizations, and simplifications in r8169
driver. From Heiner Kallweit.
18) Add memory accounting on TX and RX path of SCTP, from Xin Long.
19) Switch PHY drivers over to use dynamic featue detection, from
Heiner Kallweit.
20) Support flow steering without masking in dpaa2-eth, from Ioana
Ciocoi.
21) Implement ndo_get_devlink_port in netdevsim driver, from Jiri
Pirko.
22) Increase the strict parsing of current and future netlink
attributes, also export such policies to userspace. From Johannes
Berg.
23) Allow DSA tag drivers to be modular, from Andrew Lunn.
24) Remove legacy DSA probing support, also from Andrew Lunn.
25) Allow ll_temac driver to be used on non-x86 platforms, from Esben
Haabendal.
26) Add a generic tracepoint for TX queue timeouts to ease debugging,
from Cong Wang.
27) More indirect call optimizations, from Paolo Abeni"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1763 commits)
cxgb4: Fix error path in cxgb4_init_module
net: phy: improve pause mode reporting in phy_print_status
dt-bindings: net: Fix a typo in the phy-mode list for ethernet bindings
net: macb: Change interrupt and napi enable order in open
net: ll_temac: Improve error message on error IRQ
net/sched: remove block pointer from common offload structure
net: ethernet: support of_get_mac_address new ERR_PTR error
net: usb: smsc: fix warning reported by kbuild test robot
staging: octeon-ethernet: Fix of_get_mac_address ERR_PTR check
net: dsa: support of_get_mac_address new ERR_PTR error
net: dsa: sja1105: Fix status initialization in sja1105_get_ethtool_stats
vrf: sit mtu should not be updated when vrf netdev is the link
net: dsa: Fix error cleanup path in dsa_init_module
l2tp: Fix possible NULL pointer dereference
taprio: add null check on sched_nest to avoid potential null pointer dereference
net: mvpp2: cls: fix less than zero check on a u32 variable
net_sched: sch_fq: handle non connected flows
net_sched: sch_fq: do not assume EDT packets are ordered
net: hns3: use devm_kcalloc when allocating desc_cb
net: hns3: some cleanup for struct hns3_enet_ring
...
|
||
|
Linus Torvalds
|
82efe43959 |
Devicetree for 5.2:
- Fix possible memory leak in reserved-memory failure case - Support for DMA parent bus which are not a parent node - Clang -Wunsequenced fix - Remove some unnecessary prints on memory alloc failures - Various printk msg and comment fixes - Update DT schema tools repository location - Convert simple-framebuffer binding to DT schema - Bindings for isl68137 and ir38064 trivial devices - New documentation on binding do's and don't's for binding writers to ignore -----BEGIN PGP SIGNATURE----- iQJEBAABCgAuFiEEktVUI4SxYhzZyEuo+vtdtY28YcMFAlzR2jQQHHJvYmhAa2Vy bmVsLm9yZwAKCRD6+121jbxhw1+uD/92gu3NHyncELMu7TRHubuM1P5PCAC//BEH ZOG8lopp1v27cPA3aGiSoQu/Uy+JgCjLZWiF9ZiiCvKYaKEdYPB1r7vKWtQ/G2Mk iHJPAgm7uzq0jWTh3J9h6kZkQos1zx9Qh4R81RUdoCY9cGq613Q309Vtj+zluV4Q UVq7fGUL7kDN5LDQh+gTYkX/XBk7I5F5L50RnVcgTIVGCU2DLnRmaXdyrc71N55P w0S2d9eeUIO1N4p4aVnnL1NiY5TjVoh5T6FMWaRzRXr97/YFQVZRBFHKf5AdmUw6 oBbF2wglfWohs5kz30EpuMiqB87vHHy+VbVcybIbZxHHt5wZ7JFNQhGFV74WSt+I +YvmjtKmJZ78ZHjA8wbCno+/DUMkK8Hi5Ft6k7AICDYC6MmAbkBlSIpp10rb6Jfh c4N8Aj7uWv5MRw6dcXkUalE6FBdFq98diFrxSKOlRHwOgDFhoaDBHykAmQmKWvUl hgTjLIcl8FJbsEIyrG5mqlumo6I6/GImpmKqaZ7nD3pzfTKiWi/oVsF4vz5vulY3 Q2dAHLm+UIysI3owbOstnC6tCM+r870FQ8VOPu8Kz0NKoot4ZkUajPr9uVlu5TEM KZLWZ0j4/YnBg9DoPugjkT4YywOGl9VyqFK090pqzseYJ0Lgz7dAl6/QOWkH7C1C yvX2czRWSg== =zBKC -----END PGP SIGNATURE----- Merge tag 'devicetree-for-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull Devicetree updates from Rob Herring: - Fix possible memory leak in reserved-memory failure case - Support for DMA parent bus which are not a parent node - Clang -Wunsequenced fix - Remove some unnecessary prints on memory alloc failures - Various printk msg and comment fixes - Update DT schema tools repository location - Convert simple-framebuffer binding to DT schema - Bindings for isl68137 and ir38064 trivial devices - New documentation on binding do's and don't's for binding writers to ignore * tag 'devicetree-for-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (22 commits) of: unittest: Remove error printing on OOM of: irq: Remove WARN_ON() for kzalloc() failure dt-bindings: pinctrl: fix bias-pull,up typo dt-bindings: Update schema project location to devicetree.org github group of: fix clang -Wunsequenced for be32_to_cpu() of/device.c: fix the wrong comments dt-bindings: Add isl68137 as a trivial device dt-bindings: Add ir38064 as a trivial device of: del redundant type conversion dt-bindings: mfd: axp20x: Add fallback for axp805 of: Improve of_phandle_iterator_next() error message dt-bindings: connector: Spelling mistake dt-bindings: Add schemas for simple-framebuffer of: address: Add support for the parent DMA bus of: address: Retrieve a parent through a callback in __of_translate_address dt-bindings: bus: Add binding for the Allwinner MBUS controller dt-bindings: interconnect: Add a dma interconnect name of: use correct function prototype for of_overlay_fdt_apply() of: reserved_mem: fix reserve memory leak of: property: Document that of_graph_get_endpoint_by_regs needs of_node_put ... |
||
|
Linus Torvalds
|
8b35ad6232 |
LED updates for 5.2-rc1.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQUwxxKyE5l/npt8ARiEGxRG/Sl2wUCXNHNRQAKCRBiEGxRG/Sl
26r7AP0QapMWbN0YFvn5/TzIrkMBxz4ZXpWmCWtzpIkJRldAOAEAuhw8HgXPXZOQ
cn4VO+1zq5VBvJW+QqjqRXr0G6DaYAw=
=UVPc
-----END PGP SIGNATURE-----
Merge tag 'leds-for-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds
Pull LED updates from Jacek Anaszewski:
"LED core fixes and improvements:
- avoid races with workqueue
- Kconfig: pedantic cleanup
- small fixes for Flash class description
leds-lt3593:
- remove unneeded assignment in lt3593_led_probe
- drop pdata handling code
leds-blinkm:
- clean up double assignment to data->i2c_addr
leds-pca955x, leds-pca963x:
- revert ACPI support, as it turned out that there is no evidence
of officially registered ACPI IDs for these devices.
- make use of device property API
leds-as3645a:
- switch to fwnode property API
LED related addition to ACPI documentation:
- document how to refer to LEDs from remote nodes
LED related fix to ALSA line6/toneport driver:
- avoid polluting led_* namespace
And lm3532 driver relocation from MFD to LED subsystem, accompanied by
various improvements and optimizations; it entails also a change in
omap4-droid4-xt894.dts:
- leds: lm3532: Introduce the lm3532 LED driver
- mfd: ti-lmu: Remove LM3532 backlight driver references
- ARM: dts: omap4-droid4: Update backlight dt properties
- dt: lm3532: Add lm3532 dt doc and update ti_lmu doc"
* tag 'leds-for-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds:
leds: avoid races with workqueue
ALSA: line6: Avoid polluting led_* namespace
leds: lm3532: Introduce the lm3532 LED driver
mfd: ti-lmu: Remove LM3532 backlight driver references
ARM: dts: omap4-droid4: Update backlight dt properties
dt: lm3532: Add lm3532 dt doc and update ti_lmu doc
leds: Small fixes for Flash class description
leds: blinkm: clean up double assignment to data->i2c_addr
leds: pca963x: Make use of device property API
leds: pca955x: Make use of device property API
leds: lt3593: Remove unneeded assignment in lt3593_led_probe
leds: lt3593: drop pdata handling code
leds: pca955x: Revert "Add ACPI support"
leds: pca963x: Revert "Add ACPI support"
drivers: leds: Kconfig: pedantic cleanups
ACPI: Document how to refer to LEDs from remote nodes
leds: as3645a: Switch to fwnode property API
|
||
David S. Miller
|
a9e41a5296 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Minor conflict with the DSA legacy code removal. Signed-off-by: David S. Miller <davem@davemloft.net> |
||
Marco Felsch
|
cbebf5adde |
Input: qt1050 - add Microchip AT42QT1050 support
Add initial support for the AT42QT1050 (QT1050) device. The device supports up to five input keys, dependent on the mode. Since it adds only the initial support, the "1 to 4 keys plus Guard Channel" mode isn't supported. Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> |
||
|
Linus Torvalds
|
f678d6da74 |
Char/Misc patches for 5.2-rc1 - part 2
Here is the "real" big set of char/misc driver patches for 5.2-rc1
Loads of different driver subsystem stuff in here, all over the places:
- thunderbolt driver updates
- habanalabs driver updates
- nvmem driver updates
- extcon driver updates
- intel_th driver updates
- mei driver updates
- coresight driver updates
- soundwire driver cleanups and updates
- fastrpc driver updates
- other minor driver updates
- chardev minor fixups
Feels like this tree is getting to be a dumping ground of "small driver
subsystems" these days. Which is fine with me, if it makes things
easier for those subsystem maintainers.
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iGwEABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXNHE2w8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykvyQCYj5vSHQ88yEU+bzwGzQQLOBWYIwCgm5Iku0Y3
f6V3MvRffg4qUp3cGbU=
=R37j
-----END PGP SIGNATURE-----
Merge tag 'char-misc-5.2-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc update part 2 from Greg KH:
"Here is the "real" big set of char/misc driver patches for 5.2-rc1
Loads of different driver subsystem stuff in here, all over the places:
- thunderbolt driver updates
- habanalabs driver updates
- nvmem driver updates
- extcon driver updates
- intel_th driver updates
- mei driver updates
- coresight driver updates
- soundwire driver cleanups and updates
- fastrpc driver updates
- other minor driver updates
- chardev minor fixups
Feels like this tree is getting to be a dumping ground of "small
driver subsystems" these days. Which is fine with me, if it makes
things easier for those subsystem maintainers.
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-5.2-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (255 commits)
intel_th: msu: Add current window tracking
intel_th: msu: Add a sysfs attribute to trigger window switch
intel_th: msu: Correct the block wrap detection
intel_th: Add switch triggering support
intel_th: gth: Factor out trace start/stop
intel_th: msu: Factor out pipeline draining
intel_th: msu: Switch over to scatterlist
intel_th: msu: Replace open-coded list_{first,last,next}_entry variants
intel_th: Only report useful IRQs to subdevices
intel_th: msu: Start handling IRQs
intel_th: pci: Use MSI interrupt signalling
intel_th: Communicate IRQ via resource
intel_th: Add "rtit" source device
intel_th: Skip subdevices if their MMIO is missing
intel_th: Rework resource passing between glue layers and core
intel_th: SPDX-ify the documentation
intel_th: msu: Fix single mode with IOMMU
coresight: funnel: Support static funnel
dt-bindings: arm: coresight: Unify funnel DT binding
coresight: replicator: Add new device id for static replicator
...
|
||
|
Linus Torvalds
|
e0dccbdf5a |
Staging / IIO driver patches for 5.2-rc1
Here is the big staging and iio driver update for 5.2-rc1.
Lots of tiny fixes all over the staging and IIO driver trees here, along
with some new IIO drivers.
Also we ended up deleting two drivers, making this pull request remove a
few hundred thousand lines of code, always a nice thing to see. Both of
the drivers removed have been replaced with "real" drivers in their
various subsystem directories, and they will be coming to you from those
locations during this merge window.
There are some core vt/selection changes in here, that was due to some
cleanups needed for the speakup fixes. Those have all been acked by the
various subsystem maintainers (i.e. me), so those are ok.
We also added a few new drivers, for some odd hardware, giving new
developers plenty to work on with basic coding style cleanups to come in
the near future.
Other than that, nothing unusual here.
All of these have been in linux-next for a while with no reported
issues, other than an odd gcc warning for one of the new drivers that
should be fixed up soon.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXNHGMQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynQRACgwtlC6DFsEFwCplYxQXP5uzuIVTMAoJ61xzC0
Qim7K31f5ulaa3GJuhzo
=zEY5
-----END PGP SIGNATURE-----
Merge tag 'staging-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging / IIO driver updates from Greg KH:
"Here is the big staging and iio driver update for 5.2-rc1.
Lots of tiny fixes all over the staging and IIO driver trees here,
along with some new IIO drivers.
The "counter" subsystem was added in here as well, as it is needed by
the IIO drivers and subsystem.
Also we ended up deleting two drivers, making this pull request remove
a few hundred thousand lines of code, always a nice thing to see. Both
of the drivers removed have been replaced with "real" drivers in their
various subsystem directories, and they will be coming to you from
those locations during this merge window.
There are some core vt/selection changes in here, that was due to some
cleanups needed for the speakup fixes. Those have all been acked by
the various subsystem maintainers (i.e. me), so those are ok.
We also added a few new drivers, for some odd hardware, giving new
developers plenty to work on with basic coding style cleanups to come
in the near future.
Other than that, nothing unusual here.
All of these have been in linux-next for a while with no reported
issues, other than an odd gcc warning for one of the new drivers that
should be fixed up soon"
[ I fixed up the warning myself - Linus ]
* tag 'staging-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (663 commits)
staging: kpc2000: kpc_spi: Fix build error for {read,write}q
Staging: rtl8192e: Remove extra space before break statement
Staging: rtl8192u: ieee80211: Fix if-else indentation warning
Staging: rtl8192u: ieee80211: Fix indentation errors by removing extra spaces
staging: most: cdev: fix chrdev_region leak in mod_exit
staging: wlan-ng: Fix improper SPDX comment style
staging: rtl8192u: ieee80211: Resolve ERROR reported by checkpatch
staging: vc04_services: bcm2835-camera: Compress two lines into one line
staging: rtl8723bs: core: Use !x in place of NULL comparison.
staging: rtl8723bs: core: Prefer using the BIT Macro.
staging: fieldbus: anybus-s: fix wait_for_completion_timeout return handling
staging: kpc2000: fix up build problems with readq()
staging: rtlwifi: move remaining phydm .h files
staging: rtlwifi: strip down phydm .h files
staging: rtlwifi: delete the staging driver
staging: fieldbus: anybus-s: rename bus id field to avoid confusion
staging: fieldbus: anybus-s: keep device bus id in bus endianness
Staging: sm750fb: Change *array into *const array
staging: rtl8192u: ieee80211: Fix spelling mistake
staging: rtl8192u: ieee80211: Replace bit shifting with BIT macro
...
|
||
|
Linus Torvalds
|
01e5d1830c |
MMC core:
- Fix a few memoryleaks
- Minor improvements to the card initialization sequence
- Partially support sleepy GPIO controllers for pwrseq eMMC
MMC host:
- alcor: Work with multiple-entry sglists
- alcor: Enable DMA for writes
- meson-gx: Improve tuning support
- meson-gx: Avoid clock glitch when switching to DDR modes
- meson-gx: Disable unreliable HS400 mode
- mmci: Minor updates for support of HW busy detection
- mmci: Support data transfers for the stm32_sdmmc variant
- mmci: Restructure code to better support different variants
- mtk-sd: Add support for version found on MT7620 family SOCs
- mtk-sd: Add support for the MT8516 version
- mtk-sd: Add Chaotian Jing as the maintainer
- sdhci: Reorganize request-code to convert from tasklet to workqueue
- sdhci_am654: Stabilize support for lower speed modes
- sdhci-esdhc-imx: Add HS400 support for iMX7ULP
- sdhci-esdhc-imx: Add support for iMX7ULP version
- sdhci-of-arasan: Allow to disable DCMDs via DT for CQE
- sdhci-of-esdhc: Add support for the ls1028a version
- sdhci-of-esdhc: Several fixups for errata
- sdhci-pci: Fix BYT OCP setting
- sdhci-pci: Add support for Intel CML
- sdhci-tegra: Add support for system suspend/resume
- sdhci-tegra: Add CQE support for Tegra186 WAR
- sdhci-tegra: Add support for Tegra194
- sdhci-tegra: Update HW tuning process
MEMSTICK:
- I volunteered to help as a maintainer for the memstick subsystem, which is
reflected by an update to the MAINTAINERS file. Changes are funneled through
my MMC git and we will use the linux-mmc mailing list.
MEMSTICK host:
- A few minor cleanups
-----BEGIN PGP SIGNATURE-----
iQJLBAABCgA1FiEEugLDXPmKSktSkQsV/iaEJXNYjCkFAlzRJJsXHHVsZi5oYW5z
c29uQGxpbmFyby5vcmcACgkQ/iaEJXNYjCmhixAArz1QWF0LlpiHTqop0pPgzbKj
Z3LwQ/iyawPWpmU4SckcuBpSNTQ47I22Mzx7VPXeRyJt84T8MDlHfgA5Kc/VbRHf
G+hSUYpcw63xNnzuWy54QxsW03PgjcSKe40bOsbGsKLhm3DAY9uuWiJnqCX7hIrY
ALn3uQgeWEfJkUGwctvqe6883PBRNeu6Rwgb0IFN+rdIGBIVf6zAkTceK6m5MDoQ
iJIj5tq+z4excDQryeEpFM3kcI8lm7Eoyb35DhWVeji0sTVXgQINbkJMmFV+O2bl
hJMkpv5Zn2tqT6485McQuSdvLlTBi9FD7QJQQOgekgRUaq/FPS0N5dnhD2vK5kLs
cLOcb9LAXeHu/Xzos2aQ2Km7y2ezXH5bLda1QLeoizKwf0b7p+qtQN32cGHEKkEN
hZPTsiJiu5wgkHdkoAFp7yxf9H0TZW3rYgL0zmj31VXNChZ4oyEAYPUoUGuJbm6h
7WdXvAw19MkDl4eCHkUYqr8nwRgoBDEUYjjcc8ObsoGM1zgF3JR38Ke4dqAQZAI1
8xGI46tboQ3bKVC0uai7tO4DscJ1X/Mu5tUdk2So1F38vZ/fJFky/gnzZRoQURgY
JLB/CTbRjfpaCm3ny5MtsAGvz0AkEWbOVqOArzAMpVUZhd+pRhdOtTWjrTCUKfrf
WRPjbDiIDN8EFLrKVXU=
=Ompt
-----END PGP SIGNATURE-----
Merge tag 'mmc-v5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC updates from Ulf Hansson:
"MMC core:
- Fix a few memoryleaks
- Minor improvements to the card initialization sequence
- Partially support sleepy GPIO controllers for pwrseq eMMC
MMC host:
- alcor: Work with multiple-entry sglists
- alcor: Enable DMA for writes
- meson-gx: Improve tuning support
- meson-gx: Avoid clock glitch when switching to DDR modes
- meson-gx: Disable unreliable HS400 mode
- mmci: Minor updates for support of HW busy detection
- mmci: Support data transfers for the stm32_sdmmc variant
- mmci: Restructure code to better support different variants
- mtk-sd: Add support for version found on MT7620 family SOCs
- mtk-sd: Add support for the MT8516 version
- mtk-sd: Add Chaotian Jing as the maintainer
- sdhci: Reorganize request-code to convert from tasklet to workqueue
- sdhci_am654: Stabilize support for lower speed modes
- sdhci-esdhc-imx: Add HS400 support for iMX7ULP
- sdhci-esdhc-imx: Add support for iMX7ULP version
- sdhci-of-arasan: Allow to disable DCMDs via DT for CQE
- sdhci-of-esdhc: Add support for the ls1028a version
- sdhci-of-esdhc: Several fixups for errata
- sdhci-pci: Fix BYT OCP setting
- sdhci-pci: Add support for Intel CML
- sdhci-tegra: Add support for system suspend/resume
- sdhci-tegra: Add CQE support for Tegra186 WAR
- sdhci-tegra: Add support for Tegra194
- sdhci-tegra: Update HW tuning process
MEMSTICK:
- I volunteered to help as a maintainer for the memstick subsystem,
which is reflected by an update to the MAINTAINERS file. Changes
are funneled through my MMC git and we will use the linux-mmc
mailing list.
MEMSTICK host:
- A few minor cleanups"
* tag 'mmc-v5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (87 commits)
mmc: sdhci-pci: Fix BYT OCP setting
dt-bindings: mmc: add DT bindings for ls1028a eSDHC host controller
mmc: alcor: Drop pointer to mmc_host from alcor_sdmmc_host
mmc: mtk-sd: select REGULATOR
mmc: mtk-sd: enable internal card-detect logic.
mmc: mtk-sd: add support for config found in mt7620 family SOCs.
mmc: mtk-sd: don't hard-code interrupt trigger type
mmc: core: Fix tag set memory leak
dt-bindings: mmc: Add support for MT8516 to mtk-sd
mmc: mmci: Prevent polling for busy detection in IRQ context
mmc: mmci: Cleanup mmci_cmd_irq() for busy detect
mmc: usdhi6rol0: mark expected switch fall-throughs
mmc: core: Verify SD bus width
mmc: sdhci-esdhc-imx: Add HS400 support for iMX7ULP
mmc: sdhci-esdhc-imx: add pm_qos to interact with cpuidle
dt-bindings: mmc: fsl-imx-esdhc: add imx7ulp compatible string
mmc: meson-gx: add signal resampling tuning
mmc: meson-gx: remove Rx phase tuning
mmc: meson-gx: avoid clock glitch when switching to DDR modes
mmc: meson-gx: disable HS400
...
|
||
Maxime Chevallier
|
822dd046d7 |
dt-bindings: net: Fix a typo in the phy-mode list for ethernet bindings
The phy_mode "2000base-x" is actually supposed to be "1000base-x", even
though the commit title of the original patch says otherwise.
Fixes:
|
||
Stephen Boyd
|
ff060019f4 |
Merge branches 'clk-stm32f4', 'clk-tegra', 'clk-at91', 'clk-sifive-fu540' and 'clk-spdx' into clk-next
- Support for STM32F769 - Rework AT91 sckc DT bindings - Fix slow RC oscillator issue on sama5d3 - AT91 sam9x60 PMC support - SiFive FU540 PRCI and PLL support * clk-stm32f4: clk: stm32mp1: Add ddrperfm clock clk: stm32: Introduce clocks of STM32F769 board * clk-tegra: clk: tegra: divider: Mark Memory Controller clock as read-only clk: tegra: emc: Replace BUG() with WARN_ONCE() clk: tegra: emc: Fix EMC max-rate clamping clk: tegra: emc: Support multiple RAM codes clk: tegra: emc: Don't enable EMC clock manually clk: tegra124: Remove lock-enable bit from PLLM clk: tegra: Fix PLLM programming on Tegra124+ when PMC overrides divider clk: tegra: Don't enable already enabled PLLs * clk-at91: clk: at91: Mark struct clk_range as const clk: at91: add sam9x60 pmc driver dt-bindings: clk: at91: add bindings for SAM9X60 pmc clk: at91: add sam9x60 PLL driver clk: at91: master: Add sam9x60 support clk: at91: usb: Add sam9x60 support clk: at91: allow configuring generated PCR layout clk: at91: allow configuring peripheral PCR layout clk: at91: sckc: handle different RC startup time clk: at91: modernize sckc binding dt-bindings: clock: at91: new sckc bindings * clk-sifive-fu540: clk: sifive: add a driver for the SiFive FU540 PRCI IP block clk: analogbits: add Wide-Range PLL library dt-bindings: clk: add documentation for the SiFive PRCI driver * clk-spdx: clk: sunxi-ng: Use the correct style for SPDX License Identifier clk: sprd: Use the correct style for SPDX License Identifier clk: renesas: Use the correct style for SPDX License Identifier clk: qcom: Use the correct style for SPDX License Identifier clk: davinci: Use the correct style for SPDX License Identifier clk: actions: Use the correct style for SPDX License Identifier |
||
|
Stephen Boyd
|
5816b74581 |
Merge branches 'clk-hisi', 'clk-lochnagar', 'clk-allwinner', 'clk-rockchip' and 'clk-qoriq' into clk-next
- Mark UFS clk as critical on Hi-Silicon hi3660 SoCs - Support for Cirrus Logic Lochnagar clks * clk-hisi: clk: hi3660: Mark clk_gate_ufs_subsys as critical * clk-lochnagar: clk: lochnagar: Add support for the Cirrus Logic Lochnagar clk: lochnagar: Add initial binding documentation * clk-allwinner: clk: sunxi-ng: sun5i: Export the MBUS clock clk: sunxi-ng: a83t: Add pll-video0 as parent of csi-mclk clk: sunxi-ng: h6: Allow video & vpu clocks to change parent rate clk: sunxi-ng: h6: Preset hdmi-cec clock parent clk: sunxi: Add Kconfig options clk: sunxi-ng: f1c100s: fix USB PHY gate bit offset clk: sunxi-ng: Allow DE clock to set parent rate * clk-rockchip: clk: rockchip: undo several noc and special clocks as critical on rk3288 clk: rockchip: add a COMPOSITE_DIV_OFFSET clock-type clk: rockchip: Turn on "aclk_dmac1" for suspend on rk3288 clk: rockchip: Limit use of USB PHY clock to USB on rk3288 clk: rockchip: Fix video codec clocks on rk3288 clk: rockchip: Make rkpwm a critical clock on rk3288 clk: rockchip: fix wrong clock definitions for rk3328 * clk-qoriq: clk: qoriq: increase array size of cmux_to_group dt-bindings: qoriq-clock: Add ls1028a chip compatible string clk: qoriq: Add ls1028a clock configuration clk: qoriq: add more PLL divider clocks support dt-bindings: qoriq-clock: add more PLL divider clocks support |
||
|
Stephen Boyd
|
f6111b9d79 |
Merge branches 'clk-doc', 'clk-more-critical', 'clk-meson' and 'clk-basic-be' into clk-next
- Remove clk_readl() and introduce BE versions of basic clk types
* clk-doc:
clk: Drop duplicate clk_register() documentation
clk: Document and simplify clk_core_get_rate_nolock()
clk: Remove 'flags' member of struct clk_fixed_rate
clk: nxp: Drop 'flags' on fixed_rate clk macro
clk: Document __clk_mux_determine_rate()
clk: Document CLK_MUX_READ_ONLY mux flag
clk: Document deprecated things
clk: Collapse gpio clk kerneldoc
* clk-more-critical:
clk: highbank: Convert to CLK_IS_CRITICAL
* clk-meson: (21 commits)
clk: meson: axg-audio: add g12a support
clk: meson: axg-audio: don't register inputs in the onecell data
clk: meson: axg_audio: replace prefix axg by aud
dt-bindings: clk: axg-audio: add g12a support
clk: meson: meson8b: add the video decoder clock trees
clk: meson: meson8b: add the VPU clock trees
clk: meson: meson8b: add support for the GP_PLL clock on Meson8m2
clk: meson: meson8b: use a separate clock table for Meson8m2
dt-bindings: clock: meson8b: export the video decoder clocks
clk: meson-g12a: add video decoder clocks
dt-bindings: clock: meson8b: export the VPU clock
clk: meson-g12a: add PCIE PLL clocks
dt-bindings: clock: g12a-aoclk: expose CLKID_AO_CTS_OSCIN
clk: meson-pll: add reduced specific clk_ops for G12A PCIe PLL
dt-bindings: clock: meson8b: drop the "ABP" clock definition
clk: meson: g12a: add cpu clocks
dt-bindings: clk: g12a-clkc: add VDEC clock IDs
dt-bindings: clock: axg-audio: unexpose controller inputs
dt-bindings: clk: g12a-clkc: add PCIE PLL clock ID
clk: g12a-aoclk: re-export CLKID_AO_SAR_ADC_SEL clock id
...
* clk-basic-be:
clk: core: replace clk_{readl,writel} with {readl,writel}
clk: core: remove powerpc special handling
powerpc/512x: mark clocks as big endian
clk: mux: add explicit big endian support
clk: multiplier: add explicit big endian support
clk: gate: add explicit big endian support
clk: fractional-divider: add explicit big endian support
clk: divider: add explicit big endian support
|
||
|
Stephen Boyd
|
2ed3b9103a |
Merge branches 'clk-renesas', 'clk-qcom', 'clk-mtk', 'clk-milbeaut' and 'clk-imx' into clk-next
- Qualcomm QCS404 CDSP clk support - Qualcomm QCS404 Turing clk support - Mediatek MT8183 clock support - Mediatek MT8516 clock support - Milbeaut M10V clk controller support * clk-renesas: clk: renesas: rcar-gen3: Remove unused variable clk: renesas: rcar-gen3: Fix cpg_sd_clock_round_rate() return value clk: renesas: r8a77980: Fix RPC-IF module clock's parent clk: renesas: rcar-gen3: Rename DRIF clocks clk: renesas: rcar-gen3: Correct parent clock of Audio-DMAC clk: renesas: rcar-gen3: Correct parent clock of SYS-DMAC clk: renesas: rcar-gen3: Correct parent clock of HS-USB clk: renesas: rcar-gen3: Correct parent clock of EHCI/OHCI clk: renesas: r8a774c0: Add Z2 clock clk: renesas: r8a77990: Add Z2 clock clk: renesas: rcar-gen3: Support Z and Z2 clocks with high frequency parents math64: New DIV64_U64_ROUND_CLOSEST helper clk: renesas: rcar-gen3: Remove CLK_TYPE_GEN3_Z2 clk: renesas: rcar-gen3: Parameterise Z and Z2 clock offset clk: renesas: rcar-gen3: Parameterise Z and Z2 clock fixed divisor clk: renesas: r9a06g032: Add missing PCI USB clock clk: renesas: r7s9210: Always use readl() clk: renesas: rcar-gen3: Pass name/offset to cpg_sd_clk_register() * clk-qcom: clk: qcom: Skip halt checks on gcc_pcie_0_pipe_clk for 8998 clk: qcom: Add QCS404 TuringCC clk: qcom: branch: Add AON clock ops dt-bindings: clock: Introduce Qualcomm Turing Clock controller clk: qcom: gcc-qcs404: Add CDSP related clocks and resets * clk-mtk: clk: mediatek: add clock driver for MT8516 dt-bindings: mediatek: apmixedsys: add support for MT8516 dt-bindings: mediatek: infracfg: add support for MT8516 dt-bindings: mediatek: topckgen: add support for MT8516 clk: mediatek: Allow changing PLL rate when it is off clk: mediatek: Add MT8183 clock support clk: mediatek: Add configurable pcw_chg_reg to mtk_pll_data clk: mediatek: Add dt-bindings for MT8183 clocks dt-bindings: ARM: Mediatek: Document bindings for MT8183 clk: mediatek: Add configurable pcwibits and fmin to mtk_pll_data clk: mediatek: Add new clkmux register API clk: mediatek: Disable tuner_en before change PLL rate * clk-milbeaut: clock: milbeaut: Add Milbeaut M10V clock controller dt-bindings: clock: milbeaut: add Milbeaut clock description * clk-imx: clk: imx: correct pfdv2 gate_bit/vld_bit operations clk: imx: clk-pllv3: mark expected switch fall-throughs clk: imx8mq: Add dsi_ipg_div clk: imx: pllv4: add fractional-N pll support clk: imx: keep uart clock on during system boot clk: imx: correct i.MX7D AV PLL num/denom offset clk: imx6sll: Fix mispelling uart4_serial as serail clk: imx: pll14xx: drop unused variable clk: imx: rename clk-imx51-imx53.c to clk-imx5.c clk: imx5: Fix i.MX50 ESDHC clock registers clk: imx5: Fix i.MX50 mainbus clock registers clk: imx: Remove unused imx_get_clk_hw_fixed dt-bindings: clock: imx7ulp: remove SNVS clock clk: imx7ulp: remove snvs clock |
||
|
Linus Torvalds
|
9bff9dfc51 |
spi: Updates for v5.2
One small feature was added this release but the bulk of the diffstat
and the changelog comes from the fact that several older drivers got
some fairly hefty reworks and a couple of new drivers were added:
- Support for detailed control of timing around chip selects from
Sowjanya Komatineni.
- A big set of fixes and imrovements for the Tegra114 driver from
Sowjanya Komatineni.
- A big simplification of the GPIO driver from Andrey Smirnov.
- DMA support and fixes for the Freescale LPSPI driver from Clark Wang.
- Fixes and optimizations for the bcm2835aux from Martin Sparl.
- New drivers for Mediatek MT7621 (graduated from staging) and Zynq QSPI.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAlzQRTQTHGJyb29uaWVA
a2VybmVsLm9yZwAKCRAk1otyXVSH0GgAB/96xMofBtfeSNdZgXiF5a8LSDDmzJAF
VMy66Q0VN5JgF8bH11KIZKho/T4PgNaGdbOtBZN/bt+vKhO7ZdaGp4bdtKXLogr/
bKJ102mdFBHTNtOuY3wXJtHcYRj1TPx528weOu/VbUo/Yt+e3yRybMiVjOvuQGn8
KrSQvQRlqaZcxYBVEMg3AQB3dkTFo5/hN9ipWjrabApFhcSbybA6Ccd/2VB2JD2H
lJ04atW+hP9zQOhQJUolI5QGkRtHwV2t+iohMrqjW7bacGdbILfORgoKqpxTMaCl
vT7+2CV3OtGC0OZWdlzGrLPOMG94/nbXjzmfGuJ4KX9WiTEJcadt7OR1
=1Dfk
-----END PGP SIGNATURE-----
Merge tag 'spi-v5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi updates from Mark Brown:
"One small feature was added this release but the bulk of the diffstat
and the changelog comes from the fact that several older drivers got
some fairly hefty reworks and a couple of new drivers were added:
- Support for detailed control of timing around chip selects from
Sowjanya Komatineni.
- A big set of fixes and imrovements for the Tegra114 driver from
Sowjanya Komatineni.
- A big simplification of the GPIO driver from Andrey Smirnov.
- DMA support and fixes for the Freescale LPSPI driver from Clark
Wang.
- Fixes and optimizations for the bcm2835aux from Martin Sparl.
- New drivers for Mediatek MT7621 (graduated from staging) and Zynq
QSPI"
[ This is a so-called "evil merge" that additionally removes a warning
due to an unused variable 'i' introduced by commit
|
||
|
Linus Torvalds
|
61be53f9ef |
regulator: Updates for v5.2
In terms of big picture changes this has been an extremely quiet release
however there's a lot of changes and a fairly big diffstat thanks to a
bunch of small fixes, mainly coming from Axel Lin. Thanks to his work
this release removes code overall even though we've added a new (albiet
fairly small) driver.
Notable things:
- A fix for a long standing issue with locking on error interrupts from
Steve Twiss.
- A new driver for ST Microelectonics STM32 PWR.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAlzQQwITHGJyb29uaWVA
a2VybmVsLm9yZwAKCRAk1otyXVSH0MUbB/4pB0EgsQbDYNX97W/20+PPRu4PJGeM
XCceiaERCEmlLSk2JHQ+Vu0Hx0Dzl1Pr2bRSp8MP4reBX3Ut2tD60R5K+xPxRf8o
+H004G+Uc9uf72mMCHUvrZqrVs656XeVjus8R4V6z8ExSumEXvsc7GZXJSREPJHm
cdmI/rKs93WOmOsN3pp31w9WHD9Q0eobzKniGP4XCOahlkNMESFbclxoqJW/6iiQ
hhKuYQ2U0rmivn/xlR41+4O/NFA6e/LW70BLe/bQr09oR5oAxgMt3wO1c1ghZHU/
mMEFqMDPnRk5MrxobKbWg6SjqsX2LBc1ss04Mic12e1czODGJ4we697T
=NH6Z
-----END PGP SIGNATURE-----
Merge tag 'regulator-v5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator updates from Mark Brown:
"In terms of big picture changes this has been an extremely quiet
release however there's a lot of changes and a fairly big diffstat
thanks to a bunch of small fixes, mainly coming from Axel Lin. Thanks
to his work this release removes code overall even though we've added
a new (albiet fairly small) driver.
Notable things:
- A fix for a long standing issue with locking on error interrupts
from Steve Twiss.
- A new driver for ST Microelectonics STM32 PWR"
* tag 'regulator-v5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (134 commits)
regulator: core: simplify return value on suported_voltage
regulator: da9xxx: Switch to SPDX identifier
regulator: stm32-pwr: Remove unneeded .min_uV and .list_volage
regulator: stm32-pwr: Remove unneeded *desc from struct stm32_pwr_reg
regulator: ab3100: Set fixed_uV instead of min_uV for fixed regulators
regulator: ab3100: Constify regulator_ops and ab3100_regulator_desc
regulator: pv880x0: Switch to SPDX identifier
regulator: hi6xxx: Switch to SPDX identifier
regulator: vexpress: Switch to SPDX identifier
regulator: vexpress: Get rid of struct vexpress_regulator
regulator: sky81452: Switch to SPDX identifier
regulator: sky81452: Constify sky81452_reg_ops
regulator: sy8106a: Get rid of struct sy8106a
regulator: core: do not report EPROBE_DEFER as error but as debug
regulator: mt63xx: Switch to SPDX identifier
regulator: fan53555: Switch to SPDX identifier
regulator: fan53555: Clean up unneeded fields from struct fan53555_device_info
regulator: ltc3589: Switch to SPDX identifier
regulator: ltc3589: Get rid of struct ltc3589_regulator
regulator: ltc3589: Convert to use simplified DT parsing
...
|
||
|
Linus Torvalds
|
7aefd944f0 |
hwmon updates for v5.2
- Add driver for Intersil ISL68137 PWM Controller
- Add driver for Lochnagar 2
- Add driver for Infineon IR38064 Voltage Regulator
- Add support for TMP75B to lm75 driver
- Convert documentation to ReST format
- Use request_muxed_region for Super-IO accesses in several drivers
- Add 'samples' attribute to ABI, and start using it
- Add support for custom sysfs attributes to pmbus drivers
(used in ISL68137 driver)
- Introduce HWMON_CHANNEL_INFO macro
- Automated changes:
- Use permission specific [SENSOR_][DEVICE_]ATTR variants
- Fix build warnings due to unused of_device_id structures
- Use HWMON_CHANNEL_INFO macro
- Various minor improvements and fixes
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJc0DPYAAoJEMsfJm/On5mBptsQAI4v81dXY+/nAETcvf8e3rX9
Q8NafLYedHzLP3OX1YUhPI9HLnTxe6bumhKEkQhYNrc0u5tgr05mxe/LL3L3IgNo
sB/Fz2ySWzgYRArsAPSbiyaj5BdW2dZapik8tdKRH8/6oAq9hvpcydmU468KaEH8
/oTOlgdSN2JQFPMF0XebtJxPjzmqITJ1LLR0XgNhdtIloU1NlmMGmTsEoKyQJlSJ
L5QImEeemGuEH+vO1Gct2Jb8RYO57DVFrs2W5pbJOdGQs+JfGzs2TrzS1AZc1UMt
YhGxFTjOmjZ5JQRWsg5yTE3RuhAQlDk4Y4BAlNg6TNYCXMDYSXbRjw8oNg8ou2ZD
tvY6DkjSTJVRZ5Xe4jkUaI/13kjCS+5Vacfxva/IvVbKz4RIr8bnMM4pJiAq8tQR
6Suv6ryzYXHHhj9PLRSM5kxbDmTvUtYVLJ1ObR4Uf5R8lCA+2zsBDzpT7bOaQ1t2
q7CTfRwBv9a06j1X1MGv0J8xocGymZUN/9sNoyKa8Bp16udx1+xpkAU4PjsnLcg3
Bra9O1lcOmzwm/Mifnd8Ahyf2pijlMoYFu5xNfoNxxd/m5IK5BiiP5fJ0uW8I+sQ
msKEOi8Xc4LhzrkN9+4nvayv8sSzDvrrVF5BQuVqzOyaZMef+Z/LcaR0qHtlwxhS
Emo4fYZm3KdzSH1cjAD6
=snUV
-----END PGP SIGNATURE-----
Merge tag 'hwmon-for-v5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon updates from Guenter Roeck:
- Add driver for Intersil ISL68137 PWM Controller
- Add driver for Lochnagar 2
- Add driver for Infineon IR38064 Voltage Regulator
- Add support for TMP75B to lm75 driver
- Convert documentation to ReST format
- Use request_muxed_region for Super-IO accesses in several drivers
- Add 'samples' attribute to ABI, and start using it
- Add support for custom sysfs attributes to pmbus drivers (used in
ISL68137 driver)
- Introduce HWMON_CHANNEL_INFO macro
- Automated changes:
- Use permission specific [SENSOR_][DEVICE_]ATTR variants
- Fix build warnings due to unused of_device_id structures
- Use HWMON_CHANNEL_INFO macro
- Various minor improvements and fixes
* tag 'hwmon-for-v5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (125 commits)
hwmon: (lm75) Add support for TMP75B
dt-bindings: hwmon: Add tmp75b to lm75.txt
hwmon: (s3c) Use dev_get_drvdata()
hwmon: (max6650) Drop call to thermal_cdev_update
docs: hwmon: remove the extension from .rst files
docs: hwmon: convert three docs to ReST format
hwmon: (max6650) add thermal cooling device capability
hwmon: (ina3221) Add voltage conversion time settings
hwmon: (ina3221) Do not read-back to cache reg_config
docs: hwmon: Add an index file and rename docs to *.rst
docs: hwmon: convert remaining files to ReST format
docs: hwmon: misc files: convert to ReST format
docs: hwmon: pmbus files: convert to ReST format
docs: hwmon: k8temp, w83793: convert to ReST format
docs: hwmon: da9052, da9055: convert to ReST format
docs: hwmon: wm831x, wm8350: convert to ReST format
docs: hwmon: dme1737, vt1211: convert to ReST format
docs: hwmon: ads1015: convert to ReST format
docs: hwmon: asc7621: convert to ReST format
docs: hwmon: ibmpowernv: convert to ReST format
...
|
||
|
Linus Torvalds
|
275b103a26 |
* amd64_edac: Family 0x17, models 0x30-.. enablement (Yazen Ghannam)
* skx_*: Librarize it so that it can be shared between drivers (Qiuxu Zhuo) * altera: Stratix10 improvements (Thor Thayer) * The usual round of fixes, fixlets and cleanups -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAlzP7hkACgkQEsHwGGHe VUr1EA//R5XbYk3yucZ0w6IItELeLPO+bT2HWmTpxhIzKDMGBqefycLxYJd9P3AA oNZufW91R4+idoZ8lmv0YA/NQuqncHnsk3MZGHCeX6hE20hRM5GuCIdx5X/UHxo0 pmpdN9vvIE3aUDy0vJbUk1wWlAJ0k6uCw4NFs0sHzJdTVHZPXluZtCejHC0RbdZ+ IS0AkscNf4Ksz6TWg/WJl6d5hSloRPReMSehRo1DfZfc4arIHpg/BerQN+jh2GOm evWIxGlQifw+Q+922cWV1hl/S8PgXluLcV/FneCyMzIiE/kuglq2AROXli3jPwyI VRuNZB+qeoWe3lSjCBcUNS6XzNhyRcZx5JJ5ghIC2zUBM7LHKxkIT0wu9gHpwKpT gi6sZO98pwg+PwnNnIyC5aDmDzc3wjf1+JILlrWks8EtHwJ8pP0V972GFdMw1Ta9 l4KVLpEL8+7JO9jXerw/U5DKTXrB74sPlrLrvivsH2uYortSHV807aE5eb7xqNKy eKRKfK95NSxnnv63PV4gIFc4ap6FH0Fy9y1qvncbHUeAoWeqxb/f4wcQsYMmw0xa /Tpz+2oPUt2uPc9TryHkFtXUGfnFEyJdH8SFFThmje1QVwatzinmtUDnojj99Ewh g6C362HZBXQymuzkRF637eYpDVrt+Cj1Z1c4Jxlgxfjc6/lSimg= =GTck -----END PGP SIGNATURE----- Merge tag 'edac_for_5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp Pull EDAC updates from Borislav Petkov: - amd64_edac: Family 0x17, models 0x30-.. enablement (Yazen Ghannam) - skx_*: Librarize it so that it can be shared between drivers (Qiuxu Zhuo) - altera: Stratix10 improvements (Thor Thayer) - The usual round of fixes, fixlets and cleanups * tag 'edac_for_5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp: Revert "EDAC/amd64: Support more than two controllers for chip select handling" arm64: dts: stratix10: Use new Stratix10 EDAC bindings Documentation: dt: edac: Add Stratix10 Peripheral bindings Documentation: dt: edac: Fix Stratix10 IRQ bindings EDAC/altera, firmware/intel: Add Stratix10 ECC DBE SMC call EDAC/altera: Initialize peripheral FIFOs in probe() EDAC/altera: Do less intrusive error injection EDAC/amd64: Adjust printed chip select sizes when interleaved EDAC/amd64: Support more than two controllers for chip select handling EDAC/amd64: Recognize x16 symbol size EDAC/amd64: Set maximum channel layer size depending on family EDAC/amd64: Support more than two Unified Memory Controllers EDAC/amd64: Use a macro for iterating over Unified Memory Controllers EDAC/amd64: Add Family 17h Model 30h PCI IDs MAINTAINERS: Add entry for EDAC-I10NM MAINTAINERS: Update entry for EDAC-SKYLAKE EDAC, altera: Fix S10 Double Bit Error Notification EDAC, skx, i10nm: Make skx_common.c a pure library |
||
Linus Walleij
|
2485fa5323 |
mtd: partitions: Add AFS partitions DT bindings
This adds device tree bindings for ARM Firmware Suite flash partitioning used in NOR flashes on ARM reference designs. Cc: devicetree@vger.kernel.org Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Richard Weinberger <richard@nod.at> |
||
Chris Packham
|
6e9314dc05 |
dt-binding: mtd: physmap: Add example using addr-gpios property
Add an example showing how to use the addr-gpios property to deal with a system with limited IO space. Cc: devicetree@vger.kernel.org Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Richard Weinberger <richard@nod.at> |
||
Jonas Gorski
|
6744ebb0c7 |
dt-bindings: mtd: describe BCM963XX ImageTag format and usage
Describe how to use the BCM963XX ImageTag format in a mixed flash layout environment. Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Richard Weinberger <richard@nod.at> |
||
|
Jonas Gorski
|
daa82b93f5 |
dt-bindings: mtd: describe the simple BCM963XX NOR flash layout
Add binding documentation for the standard CFE based BCM963XX flash layout, found in most devices using a BCM63XX SoC with NOR flash. Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Richard Weinberger <richard@nod.at> |
||
Mark Brown
|
e2a23affe6
|
Merge branch 'regulator-5.2' into regulator-next | ||
|
Mark Brown
|
378d590c49
|
Merge branch 'asoc-5.2' into asoc-next | ||
Yinbo Zhu
|
3436821738 |
dt-bindings: mmc: add DT bindings for ls1028a eSDHC host controller
Add "fsl,ls1028a-esdhc" bindings for ls1028a eSDHC host controller Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> |
||
NeilBrown
|
afb7c7910b |
mmc: mtk-sd: add support for config found in mt7620 family SOCs.
mt7620 family MIPS SOCs contain the mtk-sd silicon. Add support for this. Signed-off-by: NeilBrown <neil@brown.name> Reviewed-by: Chaotian Jing <chaotian.jing@mediatek.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> |
||
Fabien Parent
|
e57112e35c |
dt-bindings: mmc: Add support for MT8516 to mtk-sd
Add binding documentation of mtk-sd for MT8516 SoCs. Signed-off-by: Fabien Parent <fparent@baylibre.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> |
||
BOUGH CHEN
|
d3db80ca57 |
dt-bindings: mmc: fsl-imx-esdhc: add imx7ulp compatible string
Add imx7ulp compatible string. Signed-off-by: Haibo Chen <haibo.chen@nxp.com> Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> |
||
|
Petr Štetiar
|
687e3d5550 |
dt-bindings: doc: reflect new NVMEM of_get_mac_address behaviour
As of_get_mac_address now supports NVMEM under the hood, we need to update the bindings documentation with the new nvmem-cell* properties, which would mean copy&pasting a lot of redundant information to every binding documentation currently referencing some of the MAC address properties. So I've just removed all the references to the optional MAC address properties and replaced them with the small note referencing net/ethernet.txt file. Signed-off-by: Petr Štetiar <ynezz@true.cz> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
David S. Miller
|
19ab5f4023 |
Merge branch 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next
Johan Hedberg says: ==================== pull request: bluetooth-next 2019-05-05 Here's one more bluetooth-next pull request for 5.2: - Fixed Command Complete event handling check for matching opcode - Added support for Qualcomm WCN3998 controller, along with DT bindings - Added default address for Broadcom BCM2076B1 controllers Please let me know if there are any issues pulling. Thanks. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
Anson Huang
|
bb83520d26 |
dt-bindings: watchdog: add i.MX system controller watchdog
Add i.MX system controller watchdog binding doc. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> |
||
Matteo Croce
|
f6cc8b355c |
watchdog: i6300esb: stop printing kernel addresses
Since commit |
||
Richard Weinberger
|
1c7cbd6347 |
NAND core changes:
- Support having the bad block markers in either the first, second or last page of a block. The combination of all three location is now possible. - Constification of NAND_OP_PARSER(_PATTERN) elements. - Generic NAND DT bindings changed to yaml format (can be used to check the proposed bindings. First platform to be fully supported: sunxi. - Stopped using several legacy hooks. - Preparation to use the generic NAND layer with the addition of several helpers and the removal of the struct nand_chip from generic functions. - Kconfig cleanup to prepare the introduction of external ECC engines support. - Fallthrough comments. - Introduction of the SPI-mem dirmap API for SPI-NAND devices. Raw NAND controller drivers changes: - nandsim: * Switch to ->exec-op(). - meson: * Misc cleanups and fixes. * New OOB layout. - Sunxi: * A23/A33 NAND DMA support. - Ingenic: * Full reorganization and cleanup. * Clear separation between NAND controller and ECC engine. * Support JZ4740 an JZ4725B. - Denali: * Clear controller/chip separation. * ->exec_op() migration. * Various cleanups. - fsl_elbc: * Enable software ECC support. - Atmel: * Sam9x60 support. - GPMI: * Introduce the GPMI_IS_MXS() macro. - Various trivial/spelling/coding style fixes. -----BEGIN PGP SIGNATURE----- iQEzBAABCgAdFiEE9HuaYnbmDhq/XIDIJWrqGEe9VoQFAly4rnMACgkQJWrqGEe9 VoSBzAgAmSx1rDxiX2033dhVvufCcqMQnkY1fguKo69lYkhgGI1EYwvq2NbGLCf4 rb7n+D1peYhzH/9GKz4/LPQPccoVIQnx9+Z+JMZRzyQ+Z73cuomX/DtQO0AsRZgE bx88vsbQFtjWv0mVluIEs51e3B/4ya6KPotxUDcaAyp2s/VKPaEI1rpiteUx8lZC QsPsYQG/ryYiBW0cmopRL6c7ZdXyWi5A0kEdypGyO8ybTxo8xBquFqhbraDlM4U2 2H3Ii3iV9HoVTyjG2nGIA094Ak0U029oWW+P9xAPf1L4z6WIVXD68sazpZng+t8s HgWP7BYDpcdRj+/Dm1b+uoaJH1fvOQ== =B7w9 -----END PGP SIGNATURE----- Merge tag 'nand/for-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux into mtd/next NAND core changes: - Support having the bad block markers in either the first, second or last page of a block. The combination of all three location is now possible. - Constification of NAND_OP_PARSER(_PATTERN) elements. - Generic NAND DT bindings changed to yaml format (can be used to check the proposed bindings. First platform to be fully supported: sunxi. - Stopped using several legacy hooks. - Preparation to use the generic NAND layer with the addition of several helpers and the removal of the struct nand_chip from generic functions. - Kconfig cleanup to prepare the introduction of external ECC engines support. - Fallthrough comments. - Introduction of the SPI-mem dirmap API for SPI-NAND devices. Raw NAND controller drivers changes: - nandsim: * Switch to ->exec-op(). - meson: * Misc cleanups and fixes. * New OOB layout. - Sunxi: * A23/A33 NAND DMA support. - Ingenic: * Full reorganization and cleanup. * Clear separation between NAND controller and ECC engine. * Support JZ4740 an JZ4725B. - Denali: * Clear controller/chip separation. * ->exec_op() migration. * Various cleanups. - fsl_elbc: * Enable software ECC support. - Atmel: * Sam9x60 support. - GPMI: * Introduce the GPMI_IS_MXS() macro. - Various trivial/spelling/coding style fixes. |
||
Sameer Pujar
|
c0e74dd254 |
Documentation: DT: Add compatibility binding for Tegra186
Tegra186 Audio DMA controller has new updates from Tegra210 version. Thus add new compatibility binding string and the same can be used by Tegra194 as well. Signed-off-by: Sameer Pujar <spujar@nvidia.com> Reviewed-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Vinod Koul <vkoul@kernel.org> |
||
Andrey Smirnov
|
7df8f2d00d |
dt-bindings: power: supply: Add bindings for Microchip UCS1002
Add bindings for Microchip UCS1002 Programmable USB Port Power Controller with Charger Emulation. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Reviewed-by: Rob Herring <robh+dt@kernel.org> Cc: Enric Balletbo Serra <enric.balletbo@collabora.com> Cc: Chris Healy <cphealy@gmail.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: linux-kernel@vger.kernel.org Cc: linux-pm@vger.kernel.org Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> |
||
Iker Perez del Palomar Sustatxa
|
be889be778 |
dt-bindings: hwmon: Add tmp75b to lm75.txt
Update the LM75's devicetree definition to allow Texas Instruments TMP75B be probed. Signed-off-by: Iker Perez del Palomar Sustatxa <iker.perez@codethink.co.uk> Signed-off-by: Guenter Roeck <linux@roeck-us.net> |
||
Greg Kroah-Hartman
|
9a552e271e |
GNSS updates for 5.2-rc1
Here are the GNSS updates for 5.2-rc1; only a new u-blox compatible. All have been in linux-next with no reported issues. Signed-off-by: Johan Hovold <johan@kernel.org> -----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQQHbPq+cpGvN/peuzMLxc3C7H1lCAUCXMxkmAAKCRALxc3C7H1l CEKsAP9U1BtmlNxN0wXh1XgDjDd2p+m5DbSNf0CMbAy0eAtPWQD/RUH/K9zO4GsN V3Csn5pBUF9osH6fOy9/TKDPNqX+HQc= =Iat7 -----END PGP SIGNATURE----- Merge tag 'gnss-5.2-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/gnss into char-misc-next Johan writes: GNSS updates for 5.2-rc1 Here are the GNSS updates for 5.2-rc1; only a new u-blox compatible. All have been in linux-next with no reported issues. Signed-off-by: Johan Hovold <johan@kernel.org> * tag 'gnss-5.2-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/gnss: gnss: ubx: add u-blox,neo-6m compatible dt-bindings: gnss: add u-blox,neo-6m compatible |
||
|
Greg Kroah-Hartman
|
3515468a87 |
USB: changes for v5.2 merge window
With a total of 50 non-merge commits, this is not a large pull request. Most of the changes are, again, in dwc2 (37%) and dwc3 (32%) with the rest of it scattered among other UDCs, function drivers and device-tree bindings. No really big feature this time around apart from support to Amlogic being added to both dwc3 and dwc2 drivers. -----BEGIN PGP SIGNATURE----- iQJRBAABCAA7FiEElLzh7wn96CXwjh2IzL64meEamQYFAlzMBPsdHGZlbGlwZS5i YWxiaUBsaW51eC5pbnRlbC5jb20ACgkQzL64meEamQZZ5RAAtYw++SU5+K8n9M5m IH+dooCgKc1ZGTmqEI7PRLQBllSMqTjOIByGd9sdsqzSp+rCToYNF0St6t2e+5oU oh+El2HNYJU6OSApiQaUya9lgDFWw0O0hXrWQ131LArVfrPNSrk7TQXxL5s7wGPG M33fa48YQ+xkPQ8w2/FQWddJgBmB9qScXrCNueheI9JZuU//Wvjpfrq+lzxI50wA 7qpqVFw/fJwLXltwEogeuzHwVd+Y/nTL4EpG5iluRqzoH72VwKlCqAwRPvyi0bnY i8gZQo2K8DBQeJqr6VMfDfWowMbINs9rL1un0mR1ci1O2PSoraluZcvzrY7s7gG3 F4rf3K/6dsnsE3PIYvAfzjug8g4luuVya0V4j1X2U7lGshLY0xHe+RSbG5QPWm/p TlXHN16Cs3t/C/dc1TxyuoKzysABBPC1rQT/0GhHpKz308UFW3z8UVAK54WiaFV7 X0bpC2AI7nc7igi4YMho4PoOAUqPgvX7G7ODxQbPLSvhWi3+K4Ih1684gHr0Gopv cHj1TLh17RaQ8o35AADHEC7iDyU+tmeIVzMm+VWzrgwE3NM1ebjd7hEUoS+iUAUt MwOaCHAaCQWRUTrIjQr75OO/j+WaJwkISJODLmJGZ1Jrj7o15WUUVOEqkqLOqE1c upNsdzzva5W19t/m56Qb1AowvIw= =k1p8 -----END PGP SIGNATURE----- Merge tag 'usb-for-v5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next Felipe writes: USB: changes for v5.2 merge window With a total of 50 non-merge commits, this is not a large pull request. Most of the changes are, again, in dwc2 (37%) and dwc3 (32%) with the rest of it scattered among other UDCs, function drivers and device-tree bindings. No really big feature this time around apart from support to Amlogic being added to both dwc3 and dwc2 drivers. * tag 'usb-for-v5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb: (50 commits) usb: dwc3: Rename DWC3_DCTL_LPM_ERRATA usb: dwc3: Fix default lpm_nyet_threshold value usb: dwc3: debug: Print GET_STATUS(device) tracepoint usb: dwc3: Do core validation early on probe usb: dwc3: gadget: Set lpm_capable usb: gadget: atmel: tie wake lock to running clock usb: gadget: atmel: support USB suspend usb: gadget: atmel_usba_udc: simplify setting of interrupt-enabled mask dwc2: gadget: Fix completed transfer size calculation in DDMA usb: dwc2: Set lpm mode parameters depend on HW configuration usb: dwc2: Fix channel disable flow usb: dwc2: Set actual frame number for completed ISOC transfer usb: gadget: do not use __constant_cpu_to_le16 usb: dwc2: gadget: Increase descriptors count for ISOC's usb: introduce usb_ep_type_string() function usb: dwc3: move synchronize_irq() out of the spinlock protected block usb: dwc3: Free resource immediately after use usb: dwc3: of-simple: Convert to bulk clk API usb: dwc2: Delayed status support usb: gadget: udc: lpc32xx: rework interrupt handling ... |
||
|
Greg Kroah-Hartman
|
12456e509b |
Merge 5.1-rc7 into usb-next
We need this to make the usb-gadget branch merge cleaner. And for testing to keep from hitting the same issues already fixed. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
Chris Brandt
|
e6ae3ca274 |
dt-bindings: i2c: riic: document r7s9210 support
Document support for the R7S9210 (RZ/A2) SoC. Also explicitly document bindings for the R7S72100 (RZ/A1) SoC. Signed-off-by: Chris Brandt <chris.brandt@renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> |