leandrof/linux
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

ARM: SoC platform updates

Browse Source 
SoC updates, mostly refactorings and cleanups of old legacy platforms.
 Major themes this release:
 
  - Conversion of ixp4xx to a modern platform (drivers, DT, bindings)
  - Moving some of the ep93xx headers around to get it closer to multiplatform enabled.
  - Cleanups of Davinci
 
 This tag also contains a few patches that were queued up as fixes before
 5.1 but I didn't get sent in before release.
 -----BEGIN PGP SIGNATURE-----
 
 iQJDBAABCAAtFiEElf+HevZ4QCAJmMQ+jBrnPN6EHHcFAlzc+sMPHG9sb2ZAbGl4
 b20ubmV0AAoJEIwa5zzehBx3ygQP/3mxLFGJxgHk6m/41V4Tepv9F2ZZ3BW4Lcp7
 vZtr6xiyhZXzIHOGzqQ4VGllfWhMWnjzZZe3iruSBY1gpJU7D4x054T3xVsIDs9F
 EIcbBm5fE0O0bdijfk7V8vBu7LOIP/KYdaD1n9WDhW0Hy4wTXN8NNLSKEU5Lq15p
 oz/A3QP5GcwhGAqaHyxx445La9yEKKWAsc2cOCRCdvfw6+n1GpoE6TI1YGjDvqbw
 xd73mIwXb0l0f7jhCV7OPyZ3t/aQgTD3ddr4gHUGNa8sSWmD5nupSVxj23FkbGby
 ejqJMxOfHpJJGIL/sxmR3+cFBYxyE+JNmrEq/kDW5ncWs/LY91juJxR1dkQKs6Mj
 4Y9CWruftDz34DlFs/J33hF/rdZ73O91ldk7zqND41Fi5aLrIKvZBJlTuqyZ0tGV
 YNRxsjWF953h8TXimDV0KvBgO4+E8d5ype/kIYtEGYO9DVmXQGMxFx2Gt2I/NfoH
 5tCtVFwDPpMxJShpXHLMzUT8sQL3mytg5L/MIPTGx+zAtDwx/qTLEEAElffG29oI
 vdzgJR0lrG/zzqQh25/M80UZYMdOrwtjAB42C+jAvlfQ0C4DtvSH+8OdcROOgj0b
 GbAJbTdHYTD6OpoxhSuRii7zzNxw+i7pQj+uLSt8s8ZReGkUk5a2wpRpoVoV2WxK
 RJHkMK95
 =pUeO
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC platform updates from Olof Johansson:
 "SoC updates, mostly refactorings and cleanups of old legacy platforms.

  Major themes this release:

   - Conversion of ixp4xx to a modern platform (drivers, DT, bindings)

   - Moving some of the ep93xx headers around to get it closer to
     multiplatform enabled.

   - Cleanups of Davinci

  This also contains a few patches that were queued up as fixes before
  5.1 but I didn't get sent in before release"

* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (123 commits)
  ARM: debug-ll: add default address for digicolor
  ARM: u300: regulator: add MODULE_LICENSE()
  ARM: ep93xx: move private headers out of mach/*
  ARM: ep93xx: move pinctrl interfaces into include/linux/soc
  ARM: ep93xx: keypad: stop using mach/platform.h
  ARM: ep93xx: move network platform data to separate header
  ARM: stm32: add AMBA support for stm32 family
  MAINTAINERS: update arch/arm/mach-davinci
  ARM: rockchip: add missing of_node_put in rockchip_smp_prepare_pmu
  ARM: dts: Add queue manager and NPE to the IXP4xx DTSI
  soc: ixp4xx: qmgr: Add DT probe code
  soc: ixp4xx: qmgr: Add DT bindings for IXP4xx qmgr
  soc: ixp4xx: npe: Add DT probe code
  soc: ixp4xx: Add DT bindings for IXP4xx NPE
  soc: ixp4xx: qmgr: Pass resources
  soc: ixp4xx: Remove unused functions
  soc: ixp4xx: Uninline several functions
  soc: ixp4xx: npe: Pass addresses as resources
  ARM: ixp4xx: Turn the QMGR into a platform device
  ARM: ixp4xx: Turn the NPE into a platform device
  ...
This commit is contained in:
Linus Torvalds 2019-05-16 08:31:32 -07:00
commit 22c58fd70c
188 changed files with 3798 additions and 4251 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

22
Documentation/devicetree/bindings/arm/intel-ixp4xx.yaml Normal file
View File

@ -0,0 +1,22 @@
# SPDX-License-Identifier: GPL-2.0
%YAML 1.2
---
$id: http://devicetree.org/schemas/arm/intel-ixp4xx.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Intel IXP4xx Device Tree Bindings
maintainers:
- Linus Walleij <linus.walleij@linaro.org>
properties:
compatible:
oneOf:
- items:
- enum:
- linksys,nslu2
- const: intel,ixp42x
- items:
- enum:
- gateworks,gw2358
- const: intel,ixp43x

6
Documentation/devicetree/bindings/bus/ti-sysc.txt
View File

@ -94,6 +94,8 @@ Optional properties:
- ti,no-idle-on-init interconnect target module should not be idled at init
- ti,no-idle interconnect target module should not be idled
Example: Single instance of MUSB controller on omap4 using interconnect ranges
using offsets from l4_cfg second segment (0x4a000000 + 0x80000 = 0x4a0ab000):
@ -131,6 +133,6 @@ using offsets from l4_cfg second segment (0x4a000000 + 0x80000 = 0x4a0ab000):
};
};
Note that other SoCs, such as am335x can have multipe child devices. On am335x
Note that other SoCs, such as am335x can have multiple child devices. On am335x
there are two MUSB instances, two USB PHY instances, and a single CPPI41 DMA
instance as children of a single interconnet target module.
instance as children of a single interconnect target module.

44
Documentation/devicetree/bindings/firmware/intel,ixp4xx-network-processing-engine.yaml Normal file
View File

@ -0,0 +1,44 @@
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
# Copyright 2019 Linaro Ltd.
%YAML 1.2
---
$id: "http://devicetree.org/schemas/firmware/intel-ixp4xx-network-processing-engine.yaml#"
$schema: "http://devicetree.org/meta-schemas/core.yaml#"
title: Intel IXP4xx Network Processing Engine
maintainers:
- Linus Walleij <linus.walleij@linaro.org>
description: |
On the IXP4xx SoCs, the Network Processing Engine (NPE) is a small
processor that can load a firmware to perform offloading of networking
and crypto tasks. It also manages the MDIO bus to the ethernet PHYs
on the IXP4xx platform. All IXP4xx platforms have three NPEs at
consecutive memory locations. They are all included in the same
device node since they are not independent of each other.
properties:
compatible:
oneOf:
- items:
- const: intel,ixp4xx-network-processing-engine
reg:
minItems: 3
maxItems: 3
items:
- description: NPE0 register range
- description: NPE1 register range
- description: NPE2 register range
required:
- compatible
- reg
examples:
- |
npe@c8006000 {
compatible = "intel,ixp4xx-network-processing-engine";
reg = <0xc8006000 0x1000>, <0xc8007000 0x1000>, <0xc8008000 0x1000>;
};

54
Documentation/devicetree/bindings/interrupt-controller/intel,ixp4xx-interrupt.yaml Normal file
View File

@ -0,0 +1,54 @@
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
# Copyright 2018 Linaro Ltd.
%YAML 1.2
---
$id: "http://devicetree.org/schemas/interrupt/intel-ixp4xx-interrupt.yaml#"
$schema: "http://devicetree.org/meta-schemas/core.yaml#"
title: Intel IXP4xx XScale Networking Processors Interrupt Controller
maintainers:
- Linus Walleij <linus.walleij@linaro.org>
description: |
This interrupt controller is found in the Intel IXP4xx processors.
Some processors have 32 interrupts, some have up to 64 interrupts.
The exact number of interrupts is determined from the compatible
string.
The distinct IXP4xx families with different interrupt controller
variations are IXP42x, IXP43x, IXP45x and IXP46x. Those four
families were the only ones to reach the developer and consumer
market.
properties:
compatible:
items:
- enum:
- intel,ixp42x-interrupt
- intel,ixp43x-interrupt
- intel,ixp45x-interrupt
- intel,ixp46x-interrupt
reg:
maxItems: 1
interrupt-controller: true
'#interrupt-cells':
const: 2
required:
- compatible
- reg
- interrupt-controller
- '#interrupt-cells'
examples:
- |
intcon: interrupt-controller@c8003000 {
compatible = "intel,ixp43x-interrupt";
reg = <0xc8003000 0x100>;
interrupt-controller;
#interrupt-cells = <2>;
};

49
Documentation/devicetree/bindings/misc/intel,ixp4xx-queue-manager.yaml Normal file
View File

@ -0,0 +1,49 @@
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
# Copyright 2019 Linaro Ltd.
%YAML 1.2
---
$id: "http://devicetree.org/schemas/misc/intel-ixp4xx-ahb-queue-manager.yaml#"
$schema: "http://devicetree.org/meta-schemas/core.yaml#"
title: Intel IXP4xx AHB Queue Manager
maintainers:
- Linus Walleij <linus.walleij@linaro.org>
description: |
The IXP4xx AHB Queue Manager maintains queues as circular buffers in
an 8KB embedded SRAM along with hardware pointers. It is used by both
the XScale processor and the NPEs (Network Processing Units) in the
IXP4xx for accelerating queues, especially for networking. Clients pick
queues from the queue manager with foo-queue = <&qmgr N> where the
&qmgr is a phandle to the queue manager and N is the queue resource
number. The queue resources available and their specific purpose
on a certain IXP4xx system will vary.
properties:
compatible:
items:
- const: intel,ixp4xx-ahb-queue-manager
reg:
maxItems: 1
interrupts:
items:
- description: Interrupt for queues 0-31
- description: Interrupt for queues 32-63
required:
- compatible
- reg
- interrupts
examples:
- |
#include <dt-bindings/interrupt-controller/irq.h>
qmgr: queue-manager@60000000 {
compatible = "intel,ixp4xx-ahb-queue-manager";
reg = <0x60000000 0x4000>;
interrupts = <3 IRQ_TYPE_LEVEL_HIGH>, <4 IRQ_TYPE_LEVEL_HIGH>;
};

42
Documentation/devicetree/bindings/timer/intel,ixp4xx-timer.yaml Normal file
View File

@ -0,0 +1,42 @@
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
# Copyright 2018 Linaro Ltd.
%YAML 1.2
---
$id: "http://devicetree.org/schemas/timer/intel-ixp4xx-timer.yaml#"
$schema: "http://devicetree.org/meta-schemas/core.yaml#"
title: Intel IXP4xx XScale Networking Processors Timers
maintainers:
- Linus Walleij <linus.walleij@linaro.org>
description: This timer is found in the Intel IXP4xx processors.
properties:
compatible:
items:
- const: intel,ixp4xx-timer
reg:
description: Should contain registers location and length
interrupts:
minItems: 1
maxItems: 2
items:
- description: Timer 1 interrupt
- description: Timer 2 interrupt
required:
- compatible
- reg
- interrupts
examples:
- |
#include <dt-bindings/interrupt-controller/irq.h>
timer@c8005000 {
compatible = "intel,ixp4xx-timer";
reg = <0xc8005000 0x100>;
interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
};

21
MAINTAINERS
View File

@ -1733,11 +1733,21 @@ L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
ARM/INTEL IXP4XX ARM ARCHITECTURE
M: Linus Walleij <linusw@kernel.org>
M: Imre Kaloz <kaloz@openwrt.org>
M: Krzysztof Halasa <khalasa@piap.pl>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
F: Documentation/devicetree/bindings/arm/intel-ixp4xx.yaml
F: Documentation/devicetree/bindings/gpio/intel,ixp4xx-gpio.txt
F: Documentation/devicetree/bindings/interrupt-controller/intel,ixp4xx-interrupt.yaml
F: Documentation/devicetree/bindings/timer/intel,ixp4xx-timer.yaml
F: arch/arm/mach-ixp4xx/
F: drivers/clocksource/timer-ixp4xx.c
F: drivers/gpio/gpio-ixp4xx.c
F: drivers/irqchip/irq-ixp4xx.c
F: include/linux/irqchip/irq-ixp4xx.h
F: include/linux/platform_data/timer-ixp4xx.h
ARM/INTEL RESEARCH IMOTE/STARGATE 2 MACHINE SUPPORT
M: Jonathan Cameron <jic23@cam.ac.uk>
@ -2238,6 +2248,7 @@ F: arch/arm/mach-socfpga/
F: arch/arm/boot/dts/socfpga*
F: arch/arm/configs/socfpga_defconfig
F: arch/arm64/boot/dts/altera/
F: arch/arm64/boot/dts/intel/
W: http://www.rocketboards.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux.git
@ -7990,10 +8001,10 @@ F: Documentation/media/v4l-drivers/ipu3.rst
INTEL IXP4XX QMGR, NPE, ETHERNET and HSS SUPPORT
M: Krzysztof Halasa <khalasa@piap.pl>
S: Maintained
F: arch/arm/mach-ixp4xx/include/mach/qmgr.h
F: arch/arm/mach-ixp4xx/include/mach/npe.h
F: arch/arm/mach-ixp4xx/ixp4xx_qmgr.c
F: arch/arm/mach-ixp4xx/ixp4xx_npe.c
F: include/linux/soc/ixp4xx/qmgr.h
F: include/linux/soc/ixp4xx/npe.h
F: drivers/soc/ixp4xx/ixp4xx-qmgr.c
F: drivers/soc/ixp4xx/ixp4xx-npe.c
F: drivers/net/ethernet/xscale/ixp4xx_eth.c
F: drivers/net/wan/ixp4xx_hss.c
@ -15654,7 +15665,7 @@ F: include/linux/clk/ti.h
TI DAVINCI MACHINE SUPPORT
M: Sekhar Nori <nsekhar@ti.com>
M: Kevin Hilman <khilman@kernel.org>
R: Bartosz Golaszewski <bgolaszewski@baylibre.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
T: git git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci.git
S: Supported

7
arch/arm/Kconfig
View File

@ -426,12 +426,15 @@ config ARCH_IXP4XX
depends on MMU
select ARCH_HAS_DMA_SET_COHERENT_MASK
select ARCH_SUPPORTS_BIG_ENDIAN
select CLKSRC_MMIO
select CPU_XSCALE
select DMABOUNCE if PCI
select GENERIC_CLOCKEVENTS
select GENERIC_IRQ_MULTI_HANDLER
select GPIO_IXP4XX
select GPIOLIB
select HAVE_PCI
select IXP4XX_IRQ
select IXP4XX_TIMER
select NEED_MACH_IO_H
select USB_EHCI_BIG_ENDIAN_DESC
select USB_EHCI_BIG_ENDIAN_MMIO
@ -897,8 +900,6 @@ config PLAT_PXA
config PLAT_VERSATILE
bool
source "arch/arm/firmware/Kconfig"
source "arch/arm/mm/Kconfig"
config IWMMXT

2
arch/arm/Kconfig.debug
View File

@ -1676,6 +1676,7 @@ config DEBUG_UART_PHYS
default 0xe6e68000 if DEBUG_RCAR_GEN2_SCIF1
default 0xe6ee0000 if DEBUG_RCAR_GEN2_SCIF4
default 0xe8008000 if DEBUG_R7S72100_SCIF2
default 0xf0000000 if DEBUG_DIGICOLOR_UA0
default 0xf0000be0 if ARCH_EBSA110
default 0xf1012000 if DEBUG_MVEBU_UART0_ALTERNATE
default 0xf1012100 if DEBUG_MVEBU_UART1_ALTERNATE
@ -1727,6 +1728,7 @@ config DEBUG_UART_VIRT
default 0xe0010fe0 if ARCH_RPC
default 0xf0000be0 if ARCH_EBSA110
default 0xf0010000 if DEBUG_ASM9260_UART
default 0xf0100000 if DEBUG_DIGICOLOR_UA0
default 0xf01fb000 if DEBUG_NOMADIK_UART
default 0xf0201000 if DEBUG_BCM2835 || DEBUG_BCM2836
default 0xf1000300 if DEBUG_BCM_5301X

1
arch/arm/Makefile
View File

@ -290,7 +290,6 @@ core-y += arch/arm/kernel/ arch/arm/mm/ arch/arm/common/
core-y += arch/arm/probes/
core-y += arch/arm/net/
core-y += arch/arm/crypto/
core-y += arch/arm/firmware/
core-y += $(machdirs) $(platdirs)
drivers-$(CONFIG_OPROFILE) += arch/arm/oprofile/

3
arch/arm/boot/dts/Makefile
View File

@ -229,6 +229,9 @@ dtb-$(CONFIG_ARCH_HIX5HD2) += \
dtb-$(CONFIG_ARCH_INTEGRATOR) += \
integratorap.dtb \
integratorcp.dtb
dtb-$(CONFIG_ARCH_IXP4XX) += \
intel-ixp42x-linksys-nslu2.dtb \
intel-ixp43x-gateworks-gw2358.dtb
dtb-$(CONFIG_ARCH_KEYSTONE) += \
keystone-k2hk-evm.dtb \
keystone-k2l-evm.dtb \

4
arch/arm/boot/dts/imx6-logicpd-baseboard.dtsi
View File

@ -88,6 +88,7 @@
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>;
startup-delay-us = <70000>;
enable-active-high;
};
@ -99,6 +100,7 @@
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio1 26 GPIO_ACTIVE_HIGH>;
startup-delay-us = <70000>;
enable-active-high;
regulator-always-on;
};
@ -216,7 +218,7 @@
&fec {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet>;
phy-mode = "rgmii";
phy-mode = "rgmii-id";
phy-reset-duration = <10>;
phy-reset-gpios = <&gpio1 24 GPIO_ACTIVE_LOW>;
phy-supply = <&reg_enet>;

2
arch/arm/boot/dts/imx6dl-riotboard.dts
View File

@ -92,7 +92,7 @@
&fec {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet>;
phy-mode = "rgmii";
phy-mode = "rgmii-id";
phy-reset-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>;
interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
<&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;

2
arch/arm/boot/dts/imx6q-ba16.dtsi
View File

@ -171,7 +171,7 @@
&fec {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet>;
phy-mode = "rgmii";
phy-mode = "rgmii-id";
status = "okay";
};

2
arch/arm/boot/dts/imx6q-marsboard.dts
View File

@ -110,7 +110,7 @@
&fec {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet>;
phy-mode = "rgmii";
phy-mode = "rgmii-id";
phy-reset-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>;
status = "okay";
};

2
arch/arm/boot/dts/imx6q-tbs2910.dts
View File

@ -98,7 +98,7 @@
&fec {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet>;
phy-mode = "rgmii";
phy-mode = "rgmii-id";
phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
status = "okay";
};

2
arch/arm/boot/dts/imx6qdl-apf6.dtsi
View File

@ -51,7 +51,7 @@
&fec {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet>;
phy-mode = "rgmii";
phy-mode = "rgmii-id";
phy-reset-duration = <10>;
phy-reset-gpios = <&gpio1 24 GPIO_ACTIVE_LOW>;
status = "okay";

2
arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
View File

@ -292,7 +292,7 @@
&fec {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet>;
phy-mode = "rgmii";
phy-mode = "rgmii-id";
interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
<&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
fsl,err006687-workaround-present;

2
arch/arm/boot/dts/imx6qdl-sabresd.dtsi
View File

@ -202,7 +202,7 @@
&fec {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet>;
phy-mode = "rgmii";
phy-mode = "rgmii-id";
phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
status = "okay";
};

2
arch/arm/boot/dts/imx6qdl-sr-som.dtsi
View File

@ -53,7 +53,7 @@
&fec {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_microsom_enet_ar8035>;
phy-mode = "rgmii";
phy-mode = "rgmii-id";
phy-reset-duration = <2>;
phy-reset-gpios = <&gpio4 15 GPIO_ACTIVE_LOW>;
status = "okay";

2
arch/arm/boot/dts/imx6qdl-wandboard.dtsi
View File

@ -224,7 +224,7 @@
&fec {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet>;
phy-mode = "rgmii";
phy-mode = "rgmii-id";
phy-reset-gpios = <&gpio3 29 GPIO_ACTIVE_LOW>;
interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
<&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;

2
arch/arm/boot/dts/imx6sx-sabreauto.dts
View File

@ -75,7 +75,7 @@
&fec1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet1>;
phy-mode = "rgmii";
phy-mode = "rgmii-id";
phy-handle = <&ethphy1>;
fsl,magic-packet;
status = "okay";

2
arch/arm/boot/dts/imx6sx-sdb.dtsi
View File

@ -191,7 +191,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet1>;
phy-supply = <&reg_enet_3v3>;
phy-mode = "rgmii";
phy-mode = "rgmii-id";
phy-handle = <&ethphy1>;
phy-reset-gpios = <&gpio2 7 GPIO_ACTIVE_LOW>;
status = "okay";

2
arch/arm/boot/dts/imx7d-pico.dtsi
View File

@ -92,7 +92,7 @@
<&clks IMX7D_ENET1_TIME_ROOT_CLK>;
assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>;
assigned-clock-rates = <0>, <100000000>;
phy-mode = "rgmii";
phy-mode = "rgmii-id";
phy-handle = <&ethphy0>;
fsl,magic-packet;
phy-reset-gpios = <&gpio6 11 GPIO_ACTIVE_LOW>;

109
arch/arm/boot/dts/intel-ixp42x-linksys-nslu2.dts Normal file
View File

@ -0,0 +1,109 @@
// SPDX-License-Identifier: ISC
/*
* Device Tree file for Linksys NSLU2
*/
/dts-v1/;
#include "intel-ixp42x.dtsi"
#include <dt-bindings/input/input.h>
/ {
model = "Linksys NSLU2 (Network Storage Link for USB 2.0 Disk Drives)";
compatible = "linksys,nslu2", "intel,ixp42x";
#address-cells = <1>;
#size-cells = <1>;
memory@0 {
/* 32 MB SDRAM */
device_type = "memory";
reg = <0x00000000 0x2000000>;
};
chosen {
bootargs = "console=ttyS0,115200n8 root=/dev/mtdblock2 rw rootfstype=squashfs,jffs2 rootwait";
stdout-path = "uart0:115200n8";
};
aliases {
serial0 = &uart0;
};
leds {
compatible = "gpio-leds";
led-status {
label = "nslu2:red:status";
gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>;
default-state = "on";
linux,default-trigger = "heartbeat";
};
led-ready {
label = "nslu2:green:ready";
gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
default-state = "on";
};
led-disk-1 {
label = "nslu2:green:disk-1";
gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
default-state = "off";
};
led-disk-2 {
label = "nslu2:green:disk-2";
gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
default-state = "off";
};
};
gpio_keys {
compatible = "gpio-keys";
button-power {
wakeup-source;
linux,code = <KEY_POWER>;
label = "power";
gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>;
};
button-reset {
wakeup-source;
linux,code = <KEY_ESC>;
label = "reset";
gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
};
};
i2c {
compatible = "i2c-gpio";
sda-gpios = <&gpio0 7 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
scl-gpios = <&gpio0 6 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
#address-cells = <1>;
#size-cells = <0>;
rtc@6f {
compatible = "xicor,x1205";
reg = <0x6f>;
};
};
gpio-poweroff {
compatible = "gpio-poweroff";
gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
timeout-ms = <5000>;
};
/* The first 16MB region on the expansion bus */
flash@50000000 {
compatible = "intel,ixp4xx-flash", "cfi-flash";
bank-width = <2>;
/*
* 8 MB of Flash in 0x20000 byte blocks
* mapped in at 0x50000000
*/
reg = <0x50000000 0x800000>;
partitions {
compatible = "redboot-fis";
/* Eraseblock at 0x7e0000 */
fis-index-block = <0x3f>;
};
};
};

25
arch/arm/boot/dts/intel-ixp42x.dtsi Normal file
View File

@ -0,0 +1,25 @@
// SPDX-License-Identifier: ISC
/*
* Device Tree file for Intel XScale Network Processors
* in the IXP 42x series. This series has 32 interrupts.
*/
#include "intel-ixp4xx.dtsi"
/ {
soc {
interrupt-controller@c8003000 {
compatible = "intel,ixp42x-interrupt";
};
/*
* This is the USB Device Mode (UDC) controller, which is used
* to present the IXP4xx as a device on a USB bus.
*/
usb@c800b000 {
compatible = "intel,ixp4xx-udc";
reg = <0xc800b000 0x1000>;
interrupts = <12 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
};
};

94
arch/arm/boot/dts/intel-ixp43x-gateworks-gw2358.dts Normal file
View File

@ -0,0 +1,94 @@
// SPDX-License-Identifier: ISC
/*
* Device Tree file for Gateworks IXP43x-based Cambria GW2358
*/
/dts-v1/;
#include "intel-ixp43x.dtsi"
/ {
model = "Gateworks Cambria GW2358";
compatible = "gateworks,gw2358", "intel,ixp43x";
#address-cells = <1>;
#size-cells = <1>;
memory@0 {
/* 128 MB SDRAM */
device_type = "memory";
reg = <0x00000000 0x8000000>;
};
chosen {
bootargs = "console=ttyS0,115200n8 root=/dev/mtdblock2 rw rootfstype=squashfs,jffs2 rootwait";
stdout-path = "uart0:115200n8";
};
aliases {
serial0 = &uart0;
};
leds {
compatible = "gpio-leds";
led-user {
label = "gw2358:green:LED";
gpios = <&pld1 0 GPIO_ACTIVE_LOW>;
default-state = "on";
linux,default-trigger = "heartbeat";
};
};
i2c {
compatible = "i2c-gpio";
sda-gpios = <&gpio0 7 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
scl-gpios = <&gpio0 6 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
#address-cells = <1>;
#size-cells = <0>;
hwmon@28 {
compatible = "adi,ad7418";
reg = <0x28>;
};
rtc: ds1672@68 {
compatible = "dallas,ds1672";
reg = <0x68>;
};
eeprom@51 {
compatible = "atmel,24c08";
reg = <0x51>;
pagesize = <16>;
size = <1024>;
read-only;
};
pld0: pld@56 {
compatible = "gateworks,pld-gpio";
reg = <0x56>;
gpio-controller;
#gpio-cells = <2>;
};
/* This PLD just handles the LED and user button */
pld1: pld@57 {
compatible = "gateworks,pld-gpio";
reg = <0x57>;
gpio-controller;
#gpio-cells = <2>;
};
};
flash@50000000 {
compatible = "intel,ixp4xx-flash", "cfi-flash";
bank-width = <2>;
/*
* 32 MB of Flash in 0x20000 byte blocks
* mapped in at 0x50000000
*/
reg = <0x50000000 0x2000000>;
partitions {
compatible = "redboot-fis";
/* Eraseblock at 0x1fe0000 */
fis-index-block = <0xff>;
};
};
};

15
arch/arm/boot/dts/intel-ixp43x.dtsi Normal file
View File

@ -0,0 +1,15 @@
// SPDX-License-Identifier: ISC
/*
* Device Tree file for Intel XScale Network Processors
* in the IXP 43x series. This series has 64 interrupts and adds a few more
* peripherals over the 42x series.
*/
#include "intel-ixp4xx.dtsi"
/ {
soc {
interrupt-controller@c8003000 {
compatible = "intel,ixp43x-interrupt";
};
};
};

34
arch/arm/boot/dts/intel-ixp45x-ixp46x.dtsi Normal file
View File

@ -0,0 +1,34 @@
// SPDX-License-Identifier: ISC
/*
* Device Tree file for Intel XScale Network Processors
* in the IXP45x and IXP46x series. This series has 64 interrupts and adds a
* few more peripherals over the 42x and 43x series so this extends the
* basic IXP4xx DTSI.
*/
#include "intel-ixp4xx.dtsi"
/ {
soc {
interrupt-controller@c8003000 {
compatible = "intel,ixp43x-interrupt";
};
/*
* This is the USB Device Mode (UDC) controller, which is used
* to present the IXP4xx as a device on a USB bus.
*/
usb@c800b000 {
compatible = "intel,ixp4xx-udc";
reg = <0xc800b000 0x1000>;
interrupts = <12 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
i2c@c8011000 {
compatible = "intel,ixp4xx-i2c";
reg = <0xc8011000 0x18>;
interrupts = <33 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
};
};

69
arch/arm/boot/dts/intel-ixp4xx.dtsi Normal file
View File

@ -0,0 +1,69 @@
// SPDX-License-Identifier: ISC
/*
* Device Tree file for Intel XScale Network Processors
* in the IXP 4xx series.
*/
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/gpio/gpio.h>
/ {
soc {
#address-cells = <1>;
#size-cells = <1>;
ranges;
compatible = "simple-bus";
interrupt-parent = <&intcon>;
qmgr: queue-manager@60000000 {
compatible = "intel,ixp4xx-ahb-queue-manager";
reg = <0x60000000 0x4000>;
interrupts = <3 IRQ_TYPE_LEVEL_HIGH>, <4 IRQ_TYPE_LEVEL_HIGH>;
};
uart0: serial@c8000000 {
compatible = "intel,xscale-uart";
reg = <0xc8000000 0x1000>;
/*
* The reg-offset and reg-shift is a side effect
* of running the platform in big endian mode.
*/
reg-offset = <3>;
reg-shift = <2>;
interrupts = <15 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <14745600>;
no-loopback-test;
};
gpio0: gpio@c8004000 {
compatible = "intel,ixp4xx-gpio";
reg = <0xc8004000 0x1000>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
intcon: interrupt-controller@c8003000 {
/*
* Note: no compatible string. The subvariant of the
* chip needs to define what version it is. The
* location of the interrupt controller is fixed in
* memory across all variants.
*/
reg = <0xc8003000 0x100>;
interrupt-controller;
#interrupt-cells = <2>;
};
timer@c8005000 {
compatible = "intel,ixp4xx-timer";
reg = <0xc8005000 0x100>;
interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
};
npe@c8006000 {
compatible = "intel,ixp4xx-network-processing-engine";
reg = <0xc8006000 0x1000>, <0xc8007000 0x1000>, <0xc8008000 0x1000>;
};
};
};

9
arch/arm/boot/dts/ls1021a-twr.dts
View File

@ -145,7 +145,7 @@
};
&enet0 {
tbi-handle = <&tbi1>;
tbi-handle = <&tbi0>;
phy-handle = <&sgmii_phy2>;
phy-connection-type = "sgmii";
status = "okay";
@ -225,6 +225,13 @@
sgmii_phy2: ethernet-phy@2 {
reg = <0x2>;
};
tbi0: tbi-phy@1f {
reg = <0x1f>;
device_type = "tbi-phy";
};
};
&mdio1 {
tbi1: tbi-phy@1f {
reg = <0x1f>;
device_type = "tbi-phy";

11
arch/arm/boot/dts/ls1021a.dtsi
View File

@ -729,7 +729,7 @@
};
mdio0: mdio@2d24000 {
compatible = "gianfar";
compatible = "fsl,etsec2-mdio";
device_type = "mdio";
#address-cells = <1>;
#size-cells = <0>;
@ -737,6 +737,15 @@
<0x0 0x2d10030 0x0 0x4>;
};
mdio1: mdio@2d64000 {
compatible = "fsl,etsec2-mdio";
device_type = "mdio";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x0 0x2d64000 0x0 0x4000>,
<0x0 0x2d50030 0x0 0x4>;
};
ptp_clock@2d10e00 {
compatible = "fsl,etsec-ptp";
reg = <0x0 0x2d10e00 0x0 0xb0>;

2
arch/arm/boot/dts/sun8i-a23-a33.dtsi
View File

@ -169,6 +169,8 @@
clock-names = "ahb", "mod";
resets = <&ccu RST_BUS_NAND>;
reset-names = "ahb";
pinctrl-names = "default";
pinctrl-0 = <&nand_pins &nand_pins_cs0 &nand_pins_rb0>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;

1
arch/arm/configs/exynos_defconfig
View File

@ -9,7 +9,6 @@ CONFIG_MODULE_UNLOAD=y
CONFIG_PARTITION_ADVANCED=y
CONFIG_ARCH_EXYNOS=y
CONFIG_ARCH_EXYNOS3=y
CONFIG_EXYNOS5420_MCPM=y
CONFIG_SMP=y
CONFIG_BIG_LITTLE=y
CONFIG_NR_CPUS=8

1
arch/arm/configs/multi_v7_defconfig
View File

@ -33,7 +33,6 @@ CONFIG_MACH_BERLIN_BG2CD=y
CONFIG_MACH_BERLIN_BG2Q=y
CONFIG_ARCH_DIGICOLOR=y
CONFIG_ARCH_EXYNOS=y
CONFIG_EXYNOS5420_MCPM=y
CONFIG_ARCH_HIGHBANK=y
CONFIG_ARCH_HISI=y
CONFIG_ARCH_HI3xxx=y

29
arch/arm/firmware/Kconfig
View File

@ -1,29 +0,0 @@
config ARCH_SUPPORTS_FIRMWARE
bool
config ARCH_SUPPORTS_TRUSTED_FOUNDATIONS
bool
select ARCH_SUPPORTS_FIRMWARE
menu "Firmware options"
depends on ARCH_SUPPORTS_FIRMWARE
config TRUSTED_FOUNDATIONS
bool "Trusted Foundations secure monitor support"
depends on ARCH_SUPPORTS_TRUSTED_FOUNDATIONS
default y
help
Some devices (including most Tegra-based consumer devices on the
market) are booted with the Trusted Foundations secure monitor
active, requiring some core operations to be performed by the secure
monitor instead of the kernel.
This option allows the kernel to invoke the secure monitor whenever
required on devices using Trusted Foundations. See
arch/arm/include/asm/trusted_foundations.h or the
tlm,trusted-foundations device tree binding documentation for details
on how to use it.
Say n if you don't know what this is about.
endmenu

4
arch/arm/firmware/Makefile
View File

@ -1,4 +0,0 @@
obj-$(CONFIG_TRUSTED_FOUNDATIONS) += trusted_foundations.o
# tf_generic_smc() fails to build with -fsanitize-coverage=trace-pc
KCOV_INSTRUMENT := n

2
arch/arm/include/asm/firmware.h
View File

@ -24,7 +24,7 @@ struct firmware_ops {
/*
* Inform the firmware we intend to enter CPU idle mode
*/
int (*prepare_idle)(void);
int (*prepare_idle)(unsigned long mode);
/*
* Enters CPU idle mode
*/

51
arch/arm/mach-davinci/board-da830-evm.c
View File

@ -29,6 +29,7 @@
#include <linux/platform_data/spi-davinci.h>
#include <linux/platform_data/usb-davinci.h>
#include <linux/platform_data/ti-aemif.h>
#include <linux/regulator/fixed.h>
#include <linux/regulator/machine.h>
#include <linux/nvmem-provider.h>
@ -53,14 +54,50 @@ static const short da830_evm_usb11_pins[] = {
-1
};
static struct gpiod_lookup_table da830_evm_usb_gpio_lookup = {
static struct regulator_consumer_supply da830_evm_usb_supplies[] = {
REGULATOR_SUPPLY("vbus", NULL),
};
static struct regulator_init_data da830_evm_usb_vbus_data = {
.consumer_supplies = da830_evm_usb_supplies,
.num_consumer_supplies = ARRAY_SIZE(da830_evm_usb_supplies),
};
static struct fixed_voltage_config da830_evm_usb_vbus = {
.supply_name = "vbus",
.microvolts = 33000000,
.init_data = &da830_evm_usb_vbus_data,
};
static struct platform_device da830_evm_usb_vbus_device = {
.name = "reg-fixed-voltage",
.id = 0,
.dev = {
.platform_data = &da830_evm_usb_vbus,
},
};
static struct gpiod_lookup_table da830_evm_usb_oc_gpio_lookup = {
.dev_id = "ohci-da8xx",
.table = {
GPIO_LOOKUP("davinci_gpio", ON_BD_USB_DRV, "vbus", 0),
GPIO_LOOKUP("davinci_gpio", ON_BD_USB_OVC, "oc", 0),
{ }
},
};
static struct gpiod_lookup_table da830_evm_usb_vbus_gpio_lookup = {
.dev_id = "reg-fixed-voltage.0",
.table = {
GPIO_LOOKUP("davinci_gpio", ON_BD_USB_DRV, "vbus", 0),
{ }
},
};
static struct gpiod_lookup_table *da830_evm_usb_gpio_lookups[] = {
&da830_evm_usb_oc_gpio_lookup,
&da830_evm_usb_vbus_gpio_lookup,
};
static struct da8xx_ohci_root_hub da830_evm_usb11_pdata = {
/* TPS2065 switch @ 5V */
.potpgt = (3 + 1) / 2, /* 3 ms max */
@ -75,6 +112,9 @@ static __init void da830_evm_usb_init(void)
pr_warn("%s: USB PHY CLK registration failed: %d\n",
__func__, ret);
gpiod_add_lookup_tables(da830_evm_usb_gpio_lookups,
ARRAY_SIZE(da830_evm_usb_gpio_lookups));
ret = da8xx_register_usb_phy();
if (ret)
pr_warn("%s: USB PHY registration failed: %d\n",
@ -100,7 +140,11 @@ static __init void da830_evm_usb_init(void)
return;
}
gpiod_add_lookup_table(&da830_evm_usb_gpio_lookup);
ret = platform_device_register(&da830_evm_usb_vbus_device);
if (ret) {
pr_warn("%s: Unable to register the vbus supply\n", __func__);
return;
}
ret = da8xx_register_usb11(&da830_evm_usb11_pdata);
if (ret)
@ -156,6 +200,7 @@ static struct gpiod_lookup_table mmc_gpios_table = {
GPIO_ACTIVE_LOW),
GPIO_LOOKUP("davinci_gpio", DA830_MMCSD_WP_PIN, "wp",
GPIO_ACTIVE_LOW),
{ }
},
};

1
arch/arm/mach-davinci/board-da850-evm.c
View File

@ -784,6 +784,7 @@ static struct gpiod_lookup_table mmc_gpios_table = {
GPIO_ACTIVE_LOW),
GPIO_LOOKUP("davinci_gpio", DA850_MMCSD_WP_PIN, "wp",
GPIO_ACTIVE_HIGH),
{ }
},
};

1
arch/arm/mach-davinci/board-dm355-evm.c
View File

@ -121,6 +121,7 @@ static struct gpiod_lookup_table i2c_recovery_gpiod_table = {
GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
GPIO_LOOKUP("davinci_gpio", DM355_I2C_SCL_PIN, "scl",
GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
{ }
},
};

1
arch/arm/mach-davinci/board-dm644x-evm.c
View File

@ -663,6 +663,7 @@ static struct gpiod_lookup_table i2c_recovery_gpiod_table = {
GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
GPIO_LOOKUP("davinci_gpio", DM644X_I2C_SCL_PIN, "scl",
GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
{ }
},
};

50
arch/arm/mach-davinci/board-omapl138-hawk.c
View File

@ -21,6 +21,7 @@
#include <linux/platform_data/mtd-davinci.h>
#include <linux/platform_data/mtd-davinci-aemif.h>
#include <linux/platform_data/ti-aemif.h>
#include <linux/regulator/fixed.h>
#include <linux/regulator/machine.h>
#include <asm/mach-types.h>
@ -298,14 +299,50 @@ static const short da850_hawk_usb11_pins[] = {
-1
};
static struct gpiod_lookup_table hawk_usb_gpio_lookup = {
static struct regulator_consumer_supply hawk_usb_supplies[] = {
REGULATOR_SUPPLY("vbus", NULL),
};
static struct regulator_init_data hawk_usb_vbus_data = {
.consumer_supplies = hawk_usb_supplies,
.num_consumer_supplies = ARRAY_SIZE(hawk_usb_supplies),
};
static struct fixed_voltage_config hawk_usb_vbus = {
.supply_name = "vbus",
.microvolts = 3300000,
.init_data = &hawk_usb_vbus_data,
};
static struct platform_device hawk_usb_vbus_device = {
.name = "reg-fixed-voltage",
.id = 0,
.dev = {
.platform_data = &hawk_usb_vbus,
},
};
static struct gpiod_lookup_table hawk_usb_oc_gpio_lookup = {
.dev_id = "ohci-da8xx",
.table = {
GPIO_LOOKUP("davinci_gpio", DA850_USB1_VBUS_PIN, "vbus", 0),
GPIO_LOOKUP("davinci_gpio", DA850_USB1_OC_PIN, "oc", 0),
{ }
},
};
static struct gpiod_lookup_table hawk_usb_vbus_gpio_lookup = {
.dev_id = "reg-fixed-voltage.0",
.table = {
GPIO_LOOKUP("davinci_gpio", DA850_USB1_VBUS_PIN, NULL, 0),
{ }
},
};
static struct gpiod_lookup_table *hawk_usb_gpio_lookups[] = {
&hawk_usb_oc_gpio_lookup,
&hawk_usb_vbus_gpio_lookup,
};
static struct da8xx_ohci_root_hub omapl138_hawk_usb11_pdata = {
/* TPS2087 switch @ 5V */
.potpgt = (3 + 1) / 2, /* 3 ms max */
@ -326,12 +363,19 @@ static __init void omapl138_hawk_usb_init(void)
pr_warn("%s: USB PHY CLK registration failed: %d\n",
__func__, ret);
gpiod_add_lookup_tables(hawk_usb_gpio_lookups,
ARRAY_SIZE(hawk_usb_gpio_lookups));
ret = da8xx_register_usb_phy();
if (ret)
pr_warn("%s: USB PHY registration failed: %d\n",
__func__, ret);
gpiod_add_lookup_table(&hawk_usb_gpio_lookup);
ret = platform_device_register(&hawk_usb_vbus_device);
if (ret) {
pr_warn("%s: Unable to register the vbus supply\n", __func__);
return;
}
ret = da8xx_register_usb11(&omapl138_hawk_usb11_pdata);
if (ret)

2
arch/arm/mach-ep93xx/adssphere.c
View File

@ -15,7 +15,7 @@
#include <linux/platform_device.h>
#include <linux/sizes.h>
#include <mach/hardware.h>
#include "hardware.h"
#include <asm/mach-types.h>
#include <asm/mach/arch.h>

3
arch/arm/mach-ep93xx/clock.c
View File

@ -20,8 +20,9 @@
#include <linux/io.h>
#include <linux/spinlock.h>
#include <linux/clkdev.h>
#include <linux/soc/cirrus/ep93xx.h>
#include <mach/hardware.h>
#include "hardware.h"
#include <asm/div64.h>

8
arch/arm/mach-ep93xx/core.c
View File

@ -39,11 +39,13 @@
#include <linux/usb/ohci_pdriver.h>
#include <linux/random.h>
#include <mach/hardware.h>
#include "hardware.h"
#include <linux/platform_data/video-ep93xx.h>
#include <linux/platform_data/keypad-ep93xx.h>
#include <linux/platform_data/spi-ep93xx.h>
#include <mach/gpio-ep93xx.h>
#include <linux/soc/cirrus/ep93xx.h>
#include "gpio-ep93xx.h"
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
@ -123,7 +125,7 @@ void ep93xx_devcfg_set_clear(unsigned int set_bits, unsigned int clear_bits)
/**
* ep93xx_chip_revision() - returns the EP93xx chip revision
*
* See <mach/platform.h> for more information.
* See "platform.h" for more information.
*/
unsigned int ep93xx_chip_revision(void)
{

2
arch/arm/mach-ep93xx/dma.c
View File

@ -26,7 +26,7 @@
#include <linux/platform_device.h>
#include <linux/platform_data/dma-ep93xx.h>
#include <mach/hardware.h>
#include "hardware.h"
#include "soc.h"

4
arch/arm/mach-ep93xx/edb93xx.c
View File

@ -33,10 +33,10 @@
#include <sound/cs4271.h>
#include <mach/hardware.h>
#include "hardware.h"
#include <linux/platform_data/video-ep93xx.h>
#include <linux/platform_data/spi-ep93xx.h>
#include <mach/gpio-ep93xx.h>
#include "gpio-ep93xx.h"
#include <asm/mach-types.h>
#include <asm/mach/arch.h>

2
arch/arm/mach-ep93xx/gesbc9312.c
View File

@ -15,7 +15,7 @@
#include <linux/platform_device.h>
#include <linux/sizes.h>
#include <mach/hardware.h>
#include "hardware.h"
#include <asm/mach-types.h>
#include <asm/mach/arch.h>

0
arch/arm/mach-ep93xx/include/mach/gpio-ep93xx.h → arch/arm/mach-ep93xx/gpio-ep93xx.h
View File

2
arch/arm/mach-ep93xx/include/mach/hardware.h → arch/arm/mach-ep93xx/hardware.h
View File

@ -6,7 +6,7 @@
#ifndef __ASM_ARCH_HARDWARE_H
#define __ASM_ARCH_HARDWARE_H
#include <mach/platform.h>
#include "platform.h"
/*
* The EP93xx has two external crystal oscillators. To generate the

2
arch/arm/mach-ep93xx/micro9.c
View File

@ -16,7 +16,7 @@
#include <linux/platform_device.h>
#include <linux/io.h>
#include <mach/hardware.h>
#include "hardware.h"
#include <asm/mach-types.h>
#include <asm/mach/arch.h>

23
arch/arm/mach-ep93xx/include/mach/platform.h → arch/arm/mach-ep93xx/platform.h
View File

@ -5,6 +5,7 @@
#ifndef __ASSEMBLY__
#include <linux/platform_data/eth-ep93xx.h>
#include <linux/reboot.h>
struct device;
@ -15,23 +16,9 @@ struct ep93xxfb_mach_info;
struct ep93xx_keypad_platform_data;
struct ep93xx_spi_info;
struct ep93xx_eth_data
{
unsigned char dev_addr[6];
unsigned char phy_id;
};
void ep93xx_map_io(void);
void ep93xx_init_irq(void);
#define EP93XX_CHIP_REV_D0 3
#define EP93XX_CHIP_REV_D1 4
#define EP93XX_CHIP_REV_E0 5
#define EP93XX_CHIP_REV_E1 6
#define EP93XX_CHIP_REV_E2 7
unsigned int ep93xx_chip_revision(void);
void ep93xx_register_flash(unsigned int width,
resource_size_t start, resource_size_t size);
@ -41,19 +28,11 @@ void ep93xx_register_spi(struct ep93xx_spi_info *info,
struct spi_board_info *devices, int num);
void ep93xx_register_fb(struct ep93xxfb_mach_info *data);
void ep93xx_register_pwm(int pwm0, int pwm1);
int ep93xx_pwm_acquire_gpio(struct platform_device *pdev);
void ep93xx_pwm_release_gpio(struct platform_device *pdev);
void ep93xx_register_keypad(struct ep93xx_keypad_platform_data *data);
int ep93xx_keypad_acquire_gpio(struct platform_device *pdev);
void ep93xx_keypad_release_gpio(struct platform_device *pdev);
void ep93xx_register_i2s(void);
int ep93xx_i2s_acquire(void);
void ep93xx_i2s_release(void);
void ep93xx_register_ac97(void);
void ep93xx_register_ide(void);
void ep93xx_register_adc(void);
int ep93xx_ide_acquire_gpio(struct platform_device *pdev);
void ep93xx_ide_release_gpio(struct platform_device *pdev);
struct device *ep93xx_init_devices(void);
extern void ep93xx_timer_init(void);

4
arch/arm/mach-ep93xx/simone.c
View File

@ -27,8 +27,8 @@
#include <linux/gpio.h>
#include <linux/gpio/machine.h>
#include <mach/hardware.h>
#include <mach/gpio-ep93xx.h>
#include "hardware.h"
#include "gpio-ep93xx.h"
#include <asm/mach-types.h>
#include <asm/mach/arch.h>

4
arch/arm/mach-ep93xx/snappercl15.c
View File

@ -25,9 +25,9 @@
#include <linux/mtd/platnand.h>
#include <mach/hardware.h>
#include "hardware.h"
#include <linux/platform_data/video-ep93xx.h>
#include <mach/gpio-ep93xx.h>
#include "gpio-ep93xx.h"
#include <asm/mach-types.h>
#include <asm/mach/arch.h>

4
arch/arm/mach-ep93xx/ts72xx.c
View File

@ -24,8 +24,8 @@
#include <linux/platform_data/spi-ep93xx.h>
#include <linux/gpio/machine.h>
#include <mach/gpio-ep93xx.h>
#include <mach/hardware.h>
#include "gpio-ep93xx.h"
#include "hardware.h"
#include <mach/irqs.h>
#include <asm/mach-types.h>

4
arch/arm/mach-ep93xx/vision_ep9307.c
View File

@ -31,10 +31,10 @@
#include <sound/cs4271.h>
#include <mach/hardware.h>
#include "hardware.h"
#include <linux/platform_data/video-ep93xx.h>
#include <linux/platform_data/spi-ep93xx.h>
#include <mach/gpio-ep93xx.h>
#include "gpio-ep93xx.h"
#include <asm/mach-types.h>
#include <asm/mach/map.h>

12
arch/arm/mach-exynos/Kconfig
View File

@ -106,21 +106,15 @@ config SOC_EXYNOS5420
bool "SAMSUNG EXYNOS5420"
default y
depends on ARCH_EXYNOS5
select MCPM if SMP
select ARM_CCI400_PORT_CTRL
select ARM_CPU_SUSPEND
config SOC_EXYNOS5800
bool "SAMSUNG EXYNOS5800"
default y
depends on SOC_EXYNOS5420
config EXYNOS5420_MCPM
bool "Exynos5420 Multi-Cluster PM support"
depends on MCPM && SOC_EXYNOS5420
select ARM_CCI400_PORT_CTRL
select ARM_CPU_SUSPEND
help
This is needed to provide CPU and cluster power management
on Exynos5420 implementing big.LITTLE.
config EXYNOS_CPU_SUSPEND
bool
select ARM_CPU_SUSPEND

2
arch/arm/mach-exynos/Makefile
View File

@ -18,5 +18,5 @@ plus_sec := $(call as-instr,.arch_extension sec,+sec)
AFLAGS_exynos-smc.o :=-Wa,-march=armv7-a$(plus_sec)
AFLAGS_sleep.o :=-Wa,-march=armv7-a$(plus_sec)
obj-$(CONFIG_EXYNOS5420_MCPM) += mcpm-exynos.o
obj-$(CONFIG_MCPM) += mcpm-exynos.o
CFLAGS_mcpm-exynos.o += -march=armv7-a

1
arch/arm/mach-exynos/common.h
View File

@ -91,6 +91,7 @@ extern u32 cp15_save_power;
extern void __iomem *sysram_ns_base_addr;
extern void __iomem *sysram_base_addr;
extern phys_addr_t sysram_base_phys;
extern void __iomem *pmu_base_addr;
void exynos_sysram_init(void);

3
arch/arm/mach-exynos/exynos.c
View File

@ -33,6 +33,7 @@ static struct platform_device exynos_cpuidle = {
};
void __iomem *sysram_base_addr __ro_after_init;
phys_addr_t sysram_base_phys __ro_after_init;
void __iomem *sysram_ns_base_addr __ro_after_init;
void __init exynos_sysram_init(void)
@ -43,6 +44,8 @@ void __init exynos_sysram_init(void)
if (!of_device_is_available(node))
continue;
sysram_base_addr = of_iomap(node, 0);
sysram_base_phys = of_translate_address(node,
of_get_address(node, 0, NULL, NULL));
break;
}

1
arch/arm/mach-exynos/firmware.c
View File

@ -196,6 +196,7 @@ bool __init exynos_secure_firmware_available(void)
return false;
addr = of_get_address(nd, 0, NULL, NULL);
of_node_put(nd);
if (!addr) {
pr_err("%s: No address specified.\n", __func__);
return false;

13
arch/arm/mach-exynos/mcpm-exynos.c
View File

@ -75,14 +75,25 @@ static int exynos_cpu_powerup(unsigned int cpu, unsigned int cluster)
*/
if (cluster &&
cluster == MPIDR_AFFINITY_LEVEL(cpu_logical_map(0), 1)) {
unsigned int timeout = 16;
/*
* Before we reset the Little cores, we should wait
* the SPARE2 register is set to 1 because the init
* codes of the iROM will set the register after
* initialization.
*/
while (!pmu_raw_readl(S5P_PMU_SPARE2))
while (timeout && !pmu_raw_readl(S5P_PMU_SPARE2)) {
timeout--;
udelay(10);
}
if (timeout == 0) {
pr_err("cpu %u cluster %u powerup failed\n",
cpu, cluster);
exynos_cpu_power_down(cpunr);
return -ETIMEDOUT;
}
pmu_raw_writel(EXYNOS5420_KFC_CORE_RESET(cpu),
EXYNOS_SWRESET);

9
arch/arm/mach-exynos/platsmp.c
View File

@ -214,13 +214,20 @@ static inline void __iomem *cpu_boot_reg(int cpu)
*/
void exynos_core_restart(u32 core_id)
{
unsigned int timeout = 16;
u32 val;
if (!of_machine_is_compatible("samsung,exynos3250"))
return;
while (!pmu_raw_readl(S5P_PMU_SPARE2))
while (timeout && !pmu_raw_readl(S5P_PMU_SPARE2)) {
timeout--;
udelay(10);
}
if (timeout == 0) {
pr_err("cpu core %u restart failed\n", core_id);
return;
}
udelay(10);
val = pmu_raw_readl(EXYNOS_ARM_CORE_STATUS(core_id));

7
arch/arm/mach-exynos/smc.h
View File

@ -25,6 +25,13 @@
#define SMC_CMD_L2X0INVALL (-24)
#define SMC_CMD_L2X0DEBUG (-25)
/* For Accessing CP15/SFR (General) */
#define SMC_CMD_REG (-101)
/* defines for SMC_CMD_REG */
#define SMC_REG_CLASS_SFR_W (0x1 << 30)
#define SMC_REG_ID_SFR_W(addr) (SMC_REG_CLASS_SFR_W | ((addr) >> 2))
#ifndef __ASSEMBLY__
extern void exynos_smc(u32 cmd, u32 arg1, u32 arg2, u32 arg3);

49
arch/arm/mach-exynos/suspend.c
View File

@ -31,6 +31,7 @@
#include <asm/suspend.h>
#include "common.h"
#include "smc.h"
#define REG_TABLE_END (-1U)
@ -62,6 +63,8 @@ struct exynos_pm_state {
int cpu_state;
unsigned int pmu_spare3;
void __iomem *sysram_base;
phys_addr_t sysram_phys;
bool secure_firmware;
};
static const struct exynos_pm_data *pm_data __ro_after_init;
@ -265,9 +268,7 @@ static int exynos5420_cpu_suspend(unsigned long arg)
unsigned int cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1);
unsigned int cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0);
writel_relaxed(0x0, pm_state.sysram_base + EXYNOS5420_CPU_STATE);
if (IS_ENABLED(CONFIG_EXYNOS5420_MCPM)) {
if (IS_ENABLED(CONFIG_MCPM)) {
mcpm_set_entry_vector(cpu, cluster, exynos_cpu_resume);
mcpm_cpu_suspend();
}
@ -341,11 +342,16 @@ static void exynos5420_pm_prepare(void)
*/
pm_state.cpu_state = readl_relaxed(pm_state.sysram_base +
EXYNOS5420_CPU_STATE);
writel_relaxed(0x0, pm_state.sysram_base + EXYNOS5420_CPU_STATE);
if (pm_state.secure_firmware)
exynos_smc(SMC_CMD_REG, SMC_REG_ID_SFR_W(pm_state.sysram_phys +
EXYNOS5420_CPU_STATE),
0, 0);
exynos_pm_enter_sleep_mode();
/* ensure at least INFORM0 has the resume address */
if (IS_ENABLED(CONFIG_EXYNOS5420_MCPM))
if (IS_ENABLED(CONFIG_MCPM))
pmu_raw_writel(__pa_symbol(mcpm_entry_point), S5P_INFORM0);
tmp = pmu_raw_readl(EXYNOS_L2_OPTION(0));
@ -444,8 +450,27 @@ early_wakeup:
static void exynos5420_prepare_pm_resume(void)
{
if (IS_ENABLED(CONFIG_EXYNOS5420_MCPM))
unsigned int mpidr, cluster;
mpidr = read_cpuid_mpidr();
cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1);
if (IS_ENABLED(CONFIG_MCPM))
WARN_ON(mcpm_cpu_powered_up());
if (IS_ENABLED(CONFIG_HW_PERF_EVENTS) && cluster != 0) {
/*
* When system is resumed on the LITTLE/KFC core (cluster 1),
* the DSCR is not properly updated until the power is turned
* on also for the cluster 0. Enable it for a while to
* propagate the SPNIDEN and SPIDEN signals from Secure JTAG
* block and avoid undefined instruction issue on CP14 reset.
*/
pmu_raw_writel(S5P_CORE_LOCAL_PWR_EN,
EXYNOS_COMMON_CONFIGURATION(0));
pmu_raw_writel(0,
EXYNOS_COMMON_CONFIGURATION(0));
}
}
static void exynos5420_pm_resume(void)
@ -460,6 +485,11 @@ static void exynos5420_pm_resume(void)
/* Restore the sysram cpu state register */
writel_relaxed(pm_state.cpu_state,
pm_state.sysram_base + EXYNOS5420_CPU_STATE);
if (pm_state.secure_firmware)
exynos_smc(SMC_CMD_REG,
SMC_REG_ID_SFR_W(pm_state.sysram_phys +
EXYNOS5420_CPU_STATE),
EXYNOS_AFTR_MAGIC, 0);
pmu_raw_writel(EXYNOS5420_USE_STANDBY_WFI_ALL,
S5P_CENTRAL_SEQ_OPTION);
@ -639,8 +669,10 @@ void __init exynos_pm_init(void)
if (WARN_ON(!of_find_property(np, "interrupt-controller", NULL))) {
pr_warn("Outdated DT detected, suspend/resume will NOT work\n");
of_node_put(np);
return;
}
of_node_put(np);
pm_data = (const struct exynos_pm_data *) match->data;
@ -659,8 +691,11 @@ void __init exynos_pm_init(void)
* Applicable as of now only to Exynos542x. If booted under secure
* firmware, the non-secure region of sysram should be used.
*/
if (exynos_secure_firmware_available())
if (exynos_secure_firmware_available()) {
pm_state.sysram_phys = sysram_base_phys;
pm_state.sysram_base = sysram_ns_base_addr;
else
pm_state.secure_firmware = true;
} else {
pm_state.sysram_base = sysram_base_addr;
}
}

6
arch/arm/mach-imx/pm-imx6.c
View File

@ -354,9 +354,11 @@ int imx6_set_lpm(enum mxc_cpu_pwr_mode mode)
*
* Note that IRQ #32 is GIC SPI #0.
*/
imx_gpc_hwirq_unmask(0);
if (mode != WAIT_CLOCKED)
imx_gpc_hwirq_unmask(0);
writel_relaxed(val, ccm_base + CLPCR);
imx_gpc_hwirq_mask(0);
if (mode != WAIT_CLOCKED)
imx_gpc_hwirq_mask(0);
return 0;
}

27
arch/arm/mach-ixp4xx/Kconfig
View File

@ -4,6 +4,20 @@ menu "Intel IXP4xx Implementation Options"
comment "IXP4xx Platforms"
config MACH_IXP4XX_OF
bool
prompt "Devce Tree IXP4xx boards"
default y
select ARM_APPENDED_DTB # Old Redboot bootloaders deployed
select I2C
select I2C_IOP3XX
select PCI
select SERIAL_OF_PLATFORM
select TIMER_OF
select USE_OF
help
Say 'Y' here to support Device Tree-based IXP4xx platforms.
config MACH_NSLU2
bool
prompt "Linksys NSLU2"
@ -222,19 +236,6 @@ config IXP4XX_INDIRECT_PCI
need to use the indirect method instead. If you don't know
what you need, leave this option unselected.
config IXP4XX_QMGR
tristate "IXP4xx Queue Manager support"
help
This driver supports IXP4xx built-in hardware queue manager
and is automatically selected by Ethernet and HSS drivers.
config IXP4XX_NPE
tristate "IXP4xx Network Processor Engine support"
select FW_LOADER
help
This driver supports IXP4xx built-in network coprocessors
and is automatically selected by Ethernet and HSS drivers.
endmenu
endif

5
arch/arm/mach-ixp4xx/Makefile
View File

@ -6,6 +6,9 @@
obj-pci-y :=
obj-pci-n :=
# Device tree platform
obj-pci-$(CONFIG_MACH_IXP4XX_OF) += ixp4xx-of.o
obj-pci-$(CONFIG_ARCH_IXDP4XX) += ixdp425-pci.o
obj-pci-$(CONFIG_MACH_AVILA) += avila-pci.o
obj-pci-$(CONFIG_MACH_IXDPG425) += ixdpg425-pci.o
@ -40,5 +43,3 @@ obj-$(CONFIG_MACH_GORAMO_MLR) += goramo_mlr.o
obj-$(CONFIG_MACH_ARCOM_VULCAN) += vulcan-setup.o
obj-$(CONFIG_PCI) += $(obj-pci-$(CONFIG_PCI)) common-pci.o
obj-$(CONFIG_IXP4XX_QMGR) += ixp4xx_qmgr.o
obj-$(CONFIG_IXP4XX_NPE) += ixp4xx_npe.o

2
arch/arm/mach-ixp4xx/avila-pci.c
View File

@ -27,6 +27,8 @@
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include "irqs.h"
#define AVILA_MAX_DEV 4
#define LOFT_MAX_DEV 6
#define IRQ_LINES 4

2
arch/arm/mach-ixp4xx/avila-setup.c
View File

@ -28,6 +28,8 @@
#include <asm/mach/arch.h>
#include <asm/mach/flash.h>
#include "irqs.h"
#define AVILA_SDA_PIN 7
#define AVILA_SCL_PIN 6

484
arch/arm/mach-ixp4xx/common.c
View File

@ -22,42 +22,31 @@
#include <linux/serial_core.h>
#include <linux/interrupt.h>
#include <linux/bitops.h>
#include <linux/time.h>
#include <linux/clocksource.h>
#include <linux/clockchips.h>
#include <linux/io.h>
#include <linux/export.h>
#include <linux/gpio/driver.h>
#include <linux/cpu.h>
#include <linux/pci.h>
#include <linux/sched_clock.h>
#include <linux/bitops.h>
#include <linux/irqchip/irq-ixp4xx.h>
#include <linux/platform_data/timer-ixp4xx.h>
#include <mach/udc.h>
#include <mach/hardware.h>
#include <mach/io.h>
#include <linux/uaccess.h>
#include <asm/pgtable.h>
#include <asm/page.h>
#include <asm/exception.h>
#include <asm/irq.h>
#include <asm/system_misc.h>
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
#include <asm/mach/time.h>
#include "irqs.h"
#define IXP4XX_TIMER_FREQ 66666000
/*
* The timer register doesn't allow to specify the two least significant bits of
* the timeout value and assumes them being zero. So make sure IXP4XX_LATCH is
* the best value with the two least significant bits unset.
*/
#define IXP4XX_LATCH DIV_ROUND_CLOSEST(IXP4XX_TIMER_FREQ, \
(IXP4XX_OST_RELOAD_MASK + 1) * HZ) * \
(IXP4XX_OST_RELOAD_MASK + 1)
static void __init ixp4xx_clocksource_init(void);
static void __init ixp4xx_clockevent_init(void);
static struct clock_event_device clockevent_ixp4xx;
/*************************************************************************
* IXP4xx chipset I/O mapping
*************************************************************************/
@ -77,11 +66,6 @@ static struct map_desc ixp4xx_io_desc[] __initdata = {
.pfn = __phys_to_pfn(IXP4XX_PCI_CFG_BASE_PHYS),
.length = IXP4XX_PCI_CFG_REGION_SIZE,
.type = MT_DEVICE
}, { /* Queue Manager */
.virtual = (unsigned long)IXP4XX_QMGR_BASE_VIRT,
.pfn = __phys_to_pfn(IXP4XX_QMGR_BASE_PHYS),
.length = IXP4XX_QMGR_REGION_SIZE,
.type = MT_DEVICE
},
};
@ -90,258 +74,23 @@ void __init ixp4xx_map_io(void)
iotable_init(ixp4xx_io_desc, ARRAY_SIZE(ixp4xx_io_desc));
}
/*
* GPIO-functions
*/
/*
* The following converted to the real HW bits the gpio_line_config
*/
/* GPIO pin types */
#define IXP4XX_GPIO_OUT 0x1
#define IXP4XX_GPIO_IN 0x2
/* GPIO signal types */
#define IXP4XX_GPIO_LOW 0
#define IXP4XX_GPIO_HIGH 1
/* GPIO Clocks */
#define IXP4XX_GPIO_CLK_0 14
#define IXP4XX_GPIO_CLK_1 15
static void gpio_line_config(u8 line, u32 direction)
{
if (direction == IXP4XX_GPIO_IN)
*IXP4XX_GPIO_GPOER |= (1 << line);
else
*IXP4XX_GPIO_GPOER &= ~(1 << line);
}
static void gpio_line_get(u8 line, int *value)
{
*value = (*IXP4XX_GPIO_GPINR >> line) & 0x1;
}
static void gpio_line_set(u8 line, int value)
{
if (value == IXP4XX_GPIO_HIGH)
*IXP4XX_GPIO_GPOUTR |= (1 << line);
else if (value == IXP4XX_GPIO_LOW)
*IXP4XX_GPIO_GPOUTR &= ~(1 << line);
}
/*************************************************************************
* IXP4xx chipset IRQ handling
*
* TODO: GPIO IRQs should be marked invalid until the user of the IRQ
* (be it PCI or something else) configures that GPIO line
* as an IRQ.
**************************************************************************/
enum ixp4xx_irq_type {
IXP4XX_IRQ_LEVEL, IXP4XX_IRQ_EDGE
};
/* Each bit represents an IRQ: 1: edge-triggered, 0: level triggered */
static unsigned long long ixp4xx_irq_edge = 0;
/*
* IRQ -> GPIO mapping table
*/
static signed char irq2gpio[32] = {
-1, -1, -1, -1, -1, -1, 0, 1,
-1, -1, -1, -1, -1, -1, -1, -1,
-1, -1, -1, 2, 3, 4, 5, 6,
7, 8, 9, 10, 11, 12, -1, -1,
};
static int ixp4xx_gpio_to_irq(struct gpio_chip *chip, unsigned gpio)
{
int irq;
for (irq = 0; irq < 32; irq++) {
if (irq2gpio[irq] == gpio)
return irq;
}
return -EINVAL;
}
static int ixp4xx_set_irq_type(struct irq_data *d, unsigned int type)
{
int line = irq2gpio[d->irq];
u32 int_style;
enum ixp4xx_irq_type irq_type;
volatile u32 *int_reg;
/*
* Only for GPIO IRQs
*/
if (line < 0)
return -EINVAL;
switch (type){
case IRQ_TYPE_EDGE_BOTH:
int_style = IXP4XX_GPIO_STYLE_TRANSITIONAL;
irq_type = IXP4XX_IRQ_EDGE;
break;
case IRQ_TYPE_EDGE_RISING:
int_style = IXP4XX_GPIO_STYLE_RISING_EDGE;
irq_type = IXP4XX_IRQ_EDGE;
break;
case IRQ_TYPE_EDGE_FALLING:
int_style = IXP4XX_GPIO_STYLE_FALLING_EDGE;
irq_type = IXP4XX_IRQ_EDGE;
break;
case IRQ_TYPE_LEVEL_HIGH:
int_style = IXP4XX_GPIO_STYLE_ACTIVE_HIGH;
irq_type = IXP4XX_IRQ_LEVEL;
break;
case IRQ_TYPE_LEVEL_LOW:
int_style = IXP4XX_GPIO_STYLE_ACTIVE_LOW;
irq_type = IXP4XX_IRQ_LEVEL;
break;
default:
return -EINVAL;
}
if (irq_type == IXP4XX_IRQ_EDGE)
ixp4xx_irq_edge |= (1 << d->irq);
else
ixp4xx_irq_edge &= ~(1 << d->irq);
if (line >= 8) { /* pins 8-15 */
line -= 8;
int_reg = IXP4XX_GPIO_GPIT2R;
} else { /* pins 0-7 */
int_reg = IXP4XX_GPIO_GPIT1R;
}
/* Clear the style for the appropriate pin */
*int_reg &= ~(IXP4XX_GPIO_STYLE_CLEAR <<
(line * IXP4XX_GPIO_STYLE_SIZE));
*IXP4XX_GPIO_GPISR = (1 << line);
/* Set the new style */
*int_reg |= (int_style << (line * IXP4XX_GPIO_STYLE_SIZE));
/* Configure the line as an input */
gpio_line_config(irq2gpio[d->irq], IXP4XX_GPIO_IN);
return 0;
}
static void ixp4xx_irq_mask(struct irq_data *d)
{
if ((cpu_is_ixp46x() || cpu_is_ixp43x()) && d->irq >= 32)
*IXP4XX_ICMR2 &= ~(1 << (d->irq - 32));
else
*IXP4XX_ICMR &= ~(1 << d->irq);
}
static void ixp4xx_irq_ack(struct irq_data *d)
{
int line = (d->irq < 32) ? irq2gpio[d->irq] : -1;
if (line >= 0)
*IXP4XX_GPIO_GPISR = (1 << line);
}
/*
* Level triggered interrupts on GPIO lines can only be cleared when the
* interrupt condition disappears.
*/
static void ixp4xx_irq_unmask(struct irq_data *d)
{
if (!(ixp4xx_irq_edge & (1 << d->irq)))
ixp4xx_irq_ack(d);
if ((cpu_is_ixp46x() || cpu_is_ixp43x()) && d->irq >= 32)
*IXP4XX_ICMR2 |= (1 << (d->irq - 32));
else
*IXP4XX_ICMR |= (1 << d->irq);
}
static struct irq_chip ixp4xx_irq_chip = {
.name = "IXP4xx",
.irq_ack = ixp4xx_irq_ack,
.irq_mask = ixp4xx_irq_mask,
.irq_unmask = ixp4xx_irq_unmask,
.irq_set_type = ixp4xx_set_irq_type,
};
void __init ixp4xx_init_irq(void)
{
int i = 0;
/*
* ixp4xx does not implement the XScale PWRMODE register
* so it must not call cpu_do_idle().
*/
cpu_idle_poll_ctrl(true);
/* Route all sources to IRQ instead of FIQ */
*IXP4XX_ICLR = 0x0;
/* Disable all interrupt */
*IXP4XX_ICMR = 0x0;
if (cpu_is_ixp46x() || cpu_is_ixp43x()) {
/* Route upper 32 sources to IRQ instead of FIQ */
*IXP4XX_ICLR2 = 0x00;
/* Disable upper 32 interrupts */
*IXP4XX_ICMR2 = 0x00;
}
/* Default to all level triggered */
for(i = 0; i < NR_IRQS; i++) {
irq_set_chip_and_handler(i, &ixp4xx_irq_chip,
handle_level_irq);
irq_clear_status_flags(i, IRQ_NOREQUEST);
}
ixp4xx_irq_init(IXP4XX_INTC_BASE_PHYS,
(cpu_is_ixp46x() || cpu_is_ixp43x()));
}
/*************************************************************************
* IXP4xx timer tick
* We use OS timer1 on the CPU for the timer tick and the timestamp
* counter as a source of real clock ticks to account for missed jiffies.
*************************************************************************/
static irqreturn_t ixp4xx_timer_interrupt(int irq, void *dev_id)
{
struct clock_event_device *evt = dev_id;
/* Clear Pending Interrupt by writing '1' to it */
*IXP4XX_OSST = IXP4XX_OSST_TIMER_1_PEND;
evt->event_handler(evt);
return IRQ_HANDLED;
}
static struct irqaction ixp4xx_timer_irq = {
.name = "timer1",
.flags = IRQF_TIMER | IRQF_IRQPOLL,
.handler = ixp4xx_timer_interrupt,
.dev_id = &clockevent_ixp4xx,
};
void __init ixp4xx_timer_init(void)
{
/* Reset/disable counter */
*IXP4XX_OSRT1 = 0;
/* Clear Pending Interrupt by writing '1' to it */
*IXP4XX_OSST = IXP4XX_OSST_TIMER_1_PEND;
/* Reset time-stamp counter */
*IXP4XX_OSTS = 0;
/* Connect the interrupt handler and enable the interrupt */
setup_irq(IRQ_IXP4XX_TIMER1, &ixp4xx_timer_irq);
ixp4xx_clocksource_init();
ixp4xx_clockevent_init();
return ixp4xx_timer_setup(IXP4XX_TIMER_BASE_PHYS,
IRQ_IXP4XX_TIMER1,
IXP4XX_TIMER_FREQ);
}
static struct pxa2xx_udc_mach_info ixp4xx_udc_info;
@ -364,6 +113,24 @@ static struct resource ixp4xx_udc_resources[] = {
},
};
static struct resource ixp4xx_gpio_resource[] = {
{
.start = IXP4XX_GPIO_BASE_PHYS,
.end = IXP4XX_GPIO_BASE_PHYS + 0xfff,
.flags = IORESOURCE_MEM,
},
};
static struct platform_device ixp4xx_gpio_device = {
.name = "ixp4xx-gpio",
.id = -1,
.dev = {
.coherent_dma_mask = DMA_BIT_MASK(32),
},
.resource = ixp4xx_gpio_resource,
.num_resources = ARRAY_SIZE(ixp4xx_gpio_resource),
};
/*
* USB device controller. The IXP4xx uses the same controller as PXA25X,
* so we just use the same device.
@ -378,7 +145,61 @@ static struct platform_device ixp4xx_udc_device = {
},
};
static struct resource ixp4xx_npe_resources[] = {
{
.start = IXP4XX_NPEA_BASE_PHYS,
.end = IXP4XX_NPEA_BASE_PHYS + 0xfff,
.flags = IORESOURCE_MEM,
},
{
.start = IXP4XX_NPEB_BASE_PHYS,
.end = IXP4XX_NPEB_BASE_PHYS + 0xfff,
.flags = IORESOURCE_MEM,
},
{
.start = IXP4XX_NPEC_BASE_PHYS,
.end = IXP4XX_NPEC_BASE_PHYS + 0xfff,
.flags = IORESOURCE_MEM,
},
};
static struct platform_device ixp4xx_npe_device = {
.name = "ixp4xx-npe",
.id = -1,
.num_resources = ARRAY_SIZE(ixp4xx_npe_resources),
.resource = ixp4xx_npe_resources,
};
static struct resource ixp4xx_qmgr_resources[] = {
{
.start = IXP4XX_QMGR_BASE_PHYS,
.end = IXP4XX_QMGR_BASE_PHYS + 0x3fff,
.flags = IORESOURCE_MEM,
},
{
.start = IRQ_IXP4XX_QM1,
.end = IRQ_IXP4XX_QM1,
.flags = IORESOURCE_IRQ,
},
{
.start = IRQ_IXP4XX_QM2,
.end = IRQ_IXP4XX_QM2,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device ixp4xx_qmgr_device = {
.name = "ixp4xx-qmgr",
.id = -1,
.num_resources = ARRAY_SIZE(ixp4xx_qmgr_resources),
.resource = ixp4xx_qmgr_resources,
};
static struct platform_device *ixp4xx_devices[] __initdata = {
&ixp4xx_npe_device,
&ixp4xx_qmgr_device,
&ixp4xx_gpio_device,
&ixp4xx_udc_device,
};
@ -413,56 +234,12 @@ static struct platform_device *ixp46x_devices[] __initdata = {
unsigned long ixp4xx_exp_bus_size;
EXPORT_SYMBOL(ixp4xx_exp_bus_size);
static int ixp4xx_gpio_direction_input(struct gpio_chip *chip, unsigned gpio)
{
gpio_line_config(gpio, IXP4XX_GPIO_IN);
return 0;
}
static int ixp4xx_gpio_direction_output(struct gpio_chip *chip, unsigned gpio,
int level)
{
gpio_line_set(gpio, level);
gpio_line_config(gpio, IXP4XX_GPIO_OUT);
return 0;
}
static int ixp4xx_gpio_get_value(struct gpio_chip *chip, unsigned gpio)
{
int value;
gpio_line_get(gpio, &value);
return value;
}
static void ixp4xx_gpio_set_value(struct gpio_chip *chip, unsigned gpio,
int value)
{
gpio_line_set(gpio, value);
}
static struct gpio_chip ixp4xx_gpio_chip = {
.label = "IXP4XX_GPIO_CHIP",
.direction_input = ixp4xx_gpio_direction_input,
.direction_output = ixp4xx_gpio_direction_output,
.get = ixp4xx_gpio_get_value,
.set = ixp4xx_gpio_set_value,
.to_irq = ixp4xx_gpio_to_irq,
.base = 0,
.ngpio = 16,
};
void __init ixp4xx_sys_init(void)
{
ixp4xx_exp_bus_size = SZ_16M;
platform_add_devices(ixp4xx_devices, ARRAY_SIZE(ixp4xx_devices));
gpiochip_add_data(&ixp4xx_gpio_chip, NULL);
if (cpu_is_ixp46x()) {
int region;
@ -481,103 +258,8 @@ void __init ixp4xx_sys_init(void)
ixp4xx_exp_bus_size >> 20);
}
/*
* sched_clock()
*/
static u64 notrace ixp4xx_read_sched_clock(void)
{
return *IXP4XX_OSTS;
}
/*
* clocksource
*/
static u64 ixp4xx_clocksource_read(struct clocksource *c)
{
return *IXP4XX_OSTS;
}
unsigned long ixp4xx_timer_freq = IXP4XX_TIMER_FREQ;
EXPORT_SYMBOL(ixp4xx_timer_freq);
static void __init ixp4xx_clocksource_init(void)
{
sched_clock_register(ixp4xx_read_sched_clock, 32, ixp4xx_timer_freq);
clocksource_mmio_init(NULL, "OSTS", ixp4xx_timer_freq, 200, 32,
ixp4xx_clocksource_read);
}
/*
* clockevents
*/
static int ixp4xx_set_next_event(unsigned long evt,
struct clock_event_device *unused)
{
unsigned long opts = *IXP4XX_OSRT1 & IXP4XX_OST_RELOAD_MASK;
*IXP4XX_OSRT1 = (evt & ~IXP4XX_OST_RELOAD_MASK) | opts;
return 0;
}
static int ixp4xx_shutdown(struct clock_event_device *evt)
{
unsigned long opts = *IXP4XX_OSRT1 & IXP4XX_OST_RELOAD_MASK;
unsigned long osrt = *IXP4XX_OSRT1 & ~IXP4XX_OST_RELOAD_MASK;
opts &= ~IXP4XX_OST_ENABLE;
*IXP4XX_OSRT1 = osrt | opts;
return 0;
}
static int ixp4xx_set_oneshot(struct clock_event_device *evt)
{
unsigned long opts = IXP4XX_OST_ENABLE | IXP4XX_OST_ONE_SHOT;
unsigned long osrt = 0;
/* period set by 'set next_event' */
*IXP4XX_OSRT1 = osrt | opts;
return 0;
}
static int ixp4xx_set_periodic(struct clock_event_device *evt)
{
unsigned long opts = IXP4XX_OST_ENABLE;
unsigned long osrt = IXP4XX_LATCH & ~IXP4XX_OST_RELOAD_MASK;
*IXP4XX_OSRT1 = osrt | opts;
return 0;
}
static int ixp4xx_resume(struct clock_event_device *evt)
{
unsigned long opts = *IXP4XX_OSRT1 & IXP4XX_OST_RELOAD_MASK;
unsigned long osrt = *IXP4XX_OSRT1 & ~IXP4XX_OST_RELOAD_MASK;
opts |= IXP4XX_OST_ENABLE;
*IXP4XX_OSRT1 = osrt | opts;
return 0;
}
static struct clock_event_device clockevent_ixp4xx = {
.name = "ixp4xx timer1",
.features = CLOCK_EVT_FEAT_PERIODIC |
CLOCK_EVT_FEAT_ONESHOT,
.rating = 200,
.set_state_shutdown = ixp4xx_shutdown,
.set_state_periodic = ixp4xx_set_periodic,
.set_state_oneshot = ixp4xx_set_oneshot,
.tick_resume = ixp4xx_resume,
.set_next_event = ixp4xx_set_next_event,
};
static void __init ixp4xx_clockevent_init(void)
{
clockevent_ixp4xx.cpumask = cpumask_of(0);
clockevents_config_and_register(&clockevent_ixp4xx, IXP4XX_TIMER_FREQ,
0xf, 0xfffffffe);
}
void ixp4xx_restart(enum reboot_mode mode, const char *cmd)
{

2
arch/arm/mach-ixp4xx/coyote-pci.c
View File

@ -23,6 +23,8 @@
#include <asm/irq.h>
#include <asm/mach/pci.h>
#include "irqs.h"
#define SLOT0_DEVID 14
#define SLOT1_DEVID 15

2
arch/arm/mach-ixp4xx/coyote-setup.c
View File

@ -25,6 +25,8 @@
#include <asm/mach/arch.h>
#include <asm/mach/flash.h>
#include "irqs.h"
#define COYOTE_IDE_BASE_PHYS IXP4XX_EXP_BUS_BASE(3)
#define COYOTE_IDE_BASE_VIRT 0xFFFE1000
#define COYOTE_IDE_REGION_SIZE 0x1000

2
arch/arm/mach-ixp4xx/dsmg600-pci.c
View File

@ -22,6 +22,8 @@
#include <asm/mach/pci.h>
#include <asm/mach-types.h>
#include "irqs.h"
#define MAX_DEV 4
#define IRQ_LINES 3

5
arch/arm/mach-ixp4xx/dsmg600-setup.c
View File

@ -35,6 +35,8 @@
#include <asm/mach/flash.h>
#include <asm/mach/time.h>
#include "irqs.h"
#define DSMG600_SDA_PIN 5
#define DSMG600_SCL_PIN 4
@ -268,9 +270,6 @@ static void __init dsmg600_init(void)
{
ixp4xx_sys_init();
/* Make sure that GPIO14 and GPIO15 are not used as clocks */
*IXP4XX_GPIO_GPCLKR = 0;
dsmg600_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
dsmg600_flash_resource.end =
IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1;

2
arch/arm/mach-ixp4xx/fsg-pci.c
View File

@ -22,6 +22,8 @@
#include <asm/mach/pci.h>
#include <asm/mach-types.h>
#include "irqs.h"
#define MAX_DEV 3
#define IRQ_LINES 3

2
arch/arm/mach-ixp4xx/fsg-setup.c
View File

@ -29,6 +29,8 @@
#include <asm/mach/arch.h>
#include <asm/mach/flash.h>
#include "irqs.h"
#define FSG_SDA_PIN 12
#define FSG_SCL_PIN 13

2
arch/arm/mach-ixp4xx/gateway7001-pci.c
View File

@ -27,6 +27,8 @@
#include <asm/mach/pci.h>
#include "irqs.h"
void __init gateway7001_pci_preinit(void)
{
irq_set_irq_type(IRQ_IXP4XX_GPIO10, IRQ_TYPE_LEVEL_LOW);

2
arch/arm/mach-ixp4xx/gateway7001-setup.c
View File

@ -28,6 +28,8 @@
#include <asm/mach/arch.h>
#include <asm/mach/flash.h>
#include "irqs.h"
static struct flash_platform_data gateway7001_flash_data = {
.map_name = "cfi_probe",
.width = 2,

2
arch/arm/mach-ixp4xx/gtwx5715-pci.c
View File

@ -30,6 +30,8 @@
#include <mach/hardware.h>
#include <asm/mach/pci.h>
#include "irqs.h"
#define SLOT0_DEVID 0
#define SLOT1_DEVID 1
#define INTA 10 /* slot 1 has INTA and INTB crossed */

2
arch/arm/mach-ixp4xx/gtwx5715-setup.c
View File

@ -36,6 +36,8 @@
#include <asm/mach/arch.h>
#include <asm/mach/flash.h>
#include "irqs.h"
/* GPIO 5,6,7 and 12 are hard wired to the Kendin KS8995M Switch
and operate as an SPI type interface. The details of the interface
are available on Kendin/Micrel's web site. */

41
arch/arm/mach-ixp4xx/include/mach/entry-macro.S
View File

@ -1,41 +0,0 @@
/*
* arch/arm/mach-ixp4xx/include/mach/entry-macro.S
*
* Low-level IRQ helper macros for IXP4xx-based platforms
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#include <mach/hardware.h>
.macro get_irqnr_preamble, base, tmp
.endm
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
ldr \irqstat, =(IXP4XX_INTC_BASE_VIRT+IXP4XX_ICIP_OFFSET)
ldr \irqstat, [\irqstat] @ get interrupts
cmp \irqstat, #0
beq 1001f @ upper IRQ?
clz \irqnr, \irqstat
mov \base, #31
sub \irqnr, \base, \irqnr
b 1002f @ lower IRQ being
@ handled
1001:
/*
* IXP465/IXP435 has an upper IRQ status register
*/
#if defined(CONFIG_CPU_IXP46X) || defined(CONFIG_CPU_IXP43X)
ldr \irqstat, =(IXP4XX_INTC_BASE_VIRT+IXP4XX_ICIP2_OFFSET)
ldr \irqstat, [\irqstat] @ get upper interrupts
mov \irqnr, #63
clz \irqstat, \irqstat
cmp \irqstat, #32
subne \irqnr, \irqnr, \irqstat
#endif
1002:
.endm

75
arch/arm/mach-ixp4xx/include/mach/irqs.h
View File

@ -1,75 +0,0 @@
/*
* arch/arm/mach-ixp4xx/include/mach/irqs.h
*
* IRQ definitions for IXP4XX based systems
*
* Copyright (C) 2002 Intel Corporation.
* Copyright (C) 2003 MontaVista Software, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
#ifndef _ARCH_IXP4XX_IRQS_H_
#define _ARCH_IXP4XX_IRQS_H_
#define IRQ_IXP4XX_NPEA 0
#define IRQ_IXP4XX_NPEB 1
#define IRQ_IXP4XX_NPEC 2
#define IRQ_IXP4XX_QM1 3
#define IRQ_IXP4XX_QM2 4
#define IRQ_IXP4XX_TIMER1 5
#define IRQ_IXP4XX_GPIO0 6
#define IRQ_IXP4XX_GPIO1 7
#define IRQ_IXP4XX_PCI_INT 8
#define IRQ_IXP4XX_PCI_DMA1 9
#define IRQ_IXP4XX_PCI_DMA2 10
#define IRQ_IXP4XX_TIMER2 11
#define IRQ_IXP4XX_USB 12
#define IRQ_IXP4XX_UART2 13
#define IRQ_IXP4XX_TIMESTAMP 14
#define IRQ_IXP4XX_UART1 15
#define IRQ_IXP4XX_WDOG 16
#define IRQ_IXP4XX_AHB_PMU 17
#define IRQ_IXP4XX_XSCALE_PMU 18
#define IRQ_IXP4XX_GPIO2 19
#define IRQ_IXP4XX_GPIO3 20
#define IRQ_IXP4XX_GPIO4 21
#define IRQ_IXP4XX_GPIO5 22
#define IRQ_IXP4XX_GPIO6 23
#define IRQ_IXP4XX_GPIO7 24
#define IRQ_IXP4XX_GPIO8 25
#define IRQ_IXP4XX_GPIO9 26
#define IRQ_IXP4XX_GPIO10 27
#define IRQ_IXP4XX_GPIO11 28
#define IRQ_IXP4XX_GPIO12 29
#define IRQ_IXP4XX_SW_INT1 30
#define IRQ_IXP4XX_SW_INT2 31
#define IRQ_IXP4XX_USB_HOST 32
#define IRQ_IXP4XX_I2C 33
#define IRQ_IXP4XX_SSP 34
#define IRQ_IXP4XX_TSYNC 35
#define IRQ_IXP4XX_EAU_DONE 36
#define IRQ_IXP4XX_SHA_DONE 37
#define IRQ_IXP4XX_SWCP_PE 58
#define IRQ_IXP4XX_QM_PE 60
#define IRQ_IXP4XX_MCU_ECC 61
#define IRQ_IXP4XX_EXP_PE 62
#define _IXP4XX_GPIO_IRQ(n) (IRQ_IXP4XX_GPIO ## n)
#define IXP4XX_GPIO_IRQ(n) _IXP4XX_GPIO_IRQ(n)
/*
* Only first 32 sources are valid if running on IXP42x systems
*/
#if defined(CONFIG_CPU_IXP46X) || defined(CONFIG_CPU_IXP43X)
#define NR_IRQS 64
#else
#define NR_IRQS 32
#endif
#define XSCALE_PMU_IRQ (IRQ_IXP4XX_XSCALE_PMU)
#endif

94
arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h
View File

@ -43,8 +43,6 @@
* Queue Manager
*/
#define IXP4XX_QMGR_BASE_PHYS 0x60000000
#define IXP4XX_QMGR_BASE_VIRT IOMEM(0xFEF15000)
#define IXP4XX_QMGR_REGION_SIZE 0x00004000
/*
* Peripheral space, including debug UART. Must be section-aligned so that
@ -132,9 +130,6 @@
#define IXP4XX_INTC_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0x3000)
#define IXP4XX_GPIO_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0x4000)
#define IXP4XX_TIMER_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0x5000)
#define IXP4XX_NPEA_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0x6000)
#define IXP4XX_NPEB_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0x7000)
#define IXP4XX_NPEC_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0x8000)
#define IXP4XX_EthB_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0x9000)
#define IXP4XX_EthC_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0xA000)
#define IXP4XX_USB_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0xB000)
@ -147,95 +142,6 @@
#define IXP4XX_I2C_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0x11000)
#define IXP4XX_SSP_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0x12000)
/*
* Constants to make it easy to access Interrupt Controller registers
*/
#define IXP4XX_ICPR_OFFSET 0x00 /* Interrupt Status */
#define IXP4XX_ICMR_OFFSET 0x04 /* Interrupt Enable */
#define IXP4XX_ICLR_OFFSET 0x08 /* Interrupt IRQ/FIQ Select */
#define IXP4XX_ICIP_OFFSET 0x0C /* IRQ Status */
#define IXP4XX_ICFP_OFFSET 0x10 /* FIQ Status */
#define IXP4XX_ICHR_OFFSET 0x14 /* Interrupt Priority */
#define IXP4XX_ICIH_OFFSET 0x18 /* IRQ Highest Pri Int */
#define IXP4XX_ICFH_OFFSET 0x1C /* FIQ Highest Pri Int */
/*
* IXP465-only
*/
#define IXP4XX_ICPR2_OFFSET 0x20 /* Interrupt Status 2 */
#define IXP4XX_ICMR2_OFFSET 0x24 /* Interrupt Enable 2 */
#define IXP4XX_ICLR2_OFFSET 0x28 /* Interrupt IRQ/FIQ Select 2 */
#define IXP4XX_ICIP2_OFFSET 0x2C /* IRQ Status */
#define IXP4XX_ICFP2_OFFSET 0x30 /* FIQ Status */
#define IXP4XX_ICEEN_OFFSET 0x34 /* Error High Pri Enable */
/*
* Interrupt Controller Register Definitions.
*/
#define IXP4XX_INTC_REG(x) ((volatile u32 *)(IXP4XX_INTC_BASE_VIRT+(x)))
#define IXP4XX_ICPR IXP4XX_INTC_REG(IXP4XX_ICPR_OFFSET)
#define IXP4XX_ICMR IXP4XX_INTC_REG(IXP4XX_ICMR_OFFSET)
#define IXP4XX_ICLR IXP4XX_INTC_REG(IXP4XX_ICLR_OFFSET)
#define IXP4XX_ICIP IXP4XX_INTC_REG(IXP4XX_ICIP_OFFSET)
#define IXP4XX_ICFP IXP4XX_INTC_REG(IXP4XX_ICFP_OFFSET)
#define IXP4XX_ICHR IXP4XX_INTC_REG(IXP4XX_ICHR_OFFSET)
#define IXP4XX_ICIH IXP4XX_INTC_REG(IXP4XX_ICIH_OFFSET)
#define IXP4XX_ICFH IXP4XX_INTC_REG(IXP4XX_ICFH_OFFSET)
#define IXP4XX_ICPR2 IXP4XX_INTC_REG(IXP4XX_ICPR2_OFFSET)
#define IXP4XX_ICMR2 IXP4XX_INTC_REG(IXP4XX_ICMR2_OFFSET)
#define IXP4XX_ICLR2 IXP4XX_INTC_REG(IXP4XX_ICLR2_OFFSET)
#define IXP4XX_ICIP2 IXP4XX_INTC_REG(IXP4XX_ICIP2_OFFSET)
#define IXP4XX_ICFP2 IXP4XX_INTC_REG(IXP4XX_ICFP2_OFFSET)
#define IXP4XX_ICEEN IXP4XX_INTC_REG(IXP4XX_ICEEN_OFFSET)
/*
* Constants to make it easy to access GPIO registers
*/
#define IXP4XX_GPIO_GPOUTR_OFFSET 0x00
#define IXP4XX_GPIO_GPOER_OFFSET 0x04
#define IXP4XX_GPIO_GPINR_OFFSET 0x08
#define IXP4XX_GPIO_GPISR_OFFSET 0x0C
#define IXP4XX_GPIO_GPIT1R_OFFSET 0x10
#define IXP4XX_GPIO_GPIT2R_OFFSET 0x14
#define IXP4XX_GPIO_GPCLKR_OFFSET 0x18
#define IXP4XX_GPIO_GPDBSELR_OFFSET 0x1C
/*
* GPIO Register Definitions.
* [Only perform 32bit reads/writes]
*/
#define IXP4XX_GPIO_REG(x) ((volatile u32 *)(IXP4XX_GPIO_BASE_VIRT+(x)))
#define IXP4XX_GPIO_GPOUTR IXP4XX_GPIO_REG(IXP4XX_GPIO_GPOUTR_OFFSET)
#define IXP4XX_GPIO_GPOER IXP4XX_GPIO_REG(IXP4XX_GPIO_GPOER_OFFSET)
#define IXP4XX_GPIO_GPINR IXP4XX_GPIO_REG(IXP4XX_GPIO_GPINR_OFFSET)
#define IXP4XX_GPIO_GPISR IXP4XX_GPIO_REG(IXP4XX_GPIO_GPISR_OFFSET)
#define IXP4XX_GPIO_GPIT1R IXP4XX_GPIO_REG(IXP4XX_GPIO_GPIT1R_OFFSET)
#define IXP4XX_GPIO_GPIT2R IXP4XX_GPIO_REG(IXP4XX_GPIO_GPIT2R_OFFSET)
#define IXP4XX_GPIO_GPCLKR IXP4XX_GPIO_REG(IXP4XX_GPIO_GPCLKR_OFFSET)
#define IXP4XX_GPIO_GPDBSELR IXP4XX_GPIO_REG(IXP4XX_GPIO_GPDBSELR_OFFSET)
/*
* GPIO register bit definitions
*/
/* Interrupt styles
*/
#define IXP4XX_GPIO_STYLE_ACTIVE_HIGH 0x0
#define IXP4XX_GPIO_STYLE_ACTIVE_LOW 0x1
#define IXP4XX_GPIO_STYLE_RISING_EDGE 0x2
#define IXP4XX_GPIO_STYLE_FALLING_EDGE 0x3
#define IXP4XX_GPIO_STYLE_TRANSITIONAL 0x4
/*
* Mask used to clear interrupt styles
*/
#define IXP4XX_GPIO_STYLE_CLEAR 0x7
#define IXP4XX_GPIO_STYLE_SIZE 3
/*
* Constants to make it easy to access Timer Control/Status registers
*/

204
arch/arm/mach-ixp4xx/include/mach/qmgr.h
View File

@ -1,204 +0,0 @@
/*
* Copyright (C) 2007 Krzysztof Halasa <khc@pm.waw.pl>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of version 2 of the GNU General Public License
* as published by the Free Software Foundation.
*/
#ifndef IXP4XX_QMGR_H
#define IXP4XX_QMGR_H
#include <linux/io.h>
#include <linux/kernel.h>
#define DEBUG_QMGR 0
#define HALF_QUEUES 32
#define QUEUES 64
#define MAX_QUEUE_LENGTH 4 /* in dwords */
#define QUEUE_STAT1_EMPTY 1 /* queue status bits */
#define QUEUE_STAT1_NEARLY_EMPTY 2
#define QUEUE_STAT1_NEARLY_FULL 4
#define QUEUE_STAT1_FULL 8
#define QUEUE_STAT2_UNDERFLOW 1
#define QUEUE_STAT2_OVERFLOW 2
#define QUEUE_WATERMARK_0_ENTRIES 0
#define QUEUE_WATERMARK_1_ENTRY 1
#define QUEUE_WATERMARK_2_ENTRIES 2
#define QUEUE_WATERMARK_4_ENTRIES 3
#define QUEUE_WATERMARK_8_ENTRIES 4
#define QUEUE_WATERMARK_16_ENTRIES 5
#define QUEUE_WATERMARK_32_ENTRIES 6
#define QUEUE_WATERMARK_64_ENTRIES 7
/* queue interrupt request conditions */
#define QUEUE_IRQ_SRC_EMPTY 0
#define QUEUE_IRQ_SRC_NEARLY_EMPTY 1
#define QUEUE_IRQ_SRC_NEARLY_FULL 2
#define QUEUE_IRQ_SRC_FULL 3
#define QUEUE_IRQ_SRC_NOT_EMPTY 4
#define QUEUE_IRQ_SRC_NOT_NEARLY_EMPTY 5
#define QUEUE_IRQ_SRC_NOT_NEARLY_FULL 6
#define QUEUE_IRQ_SRC_NOT_FULL 7
struct qmgr_regs {
u32 acc[QUEUES][MAX_QUEUE_LENGTH]; /* 0x000 - 0x3FF */
u32 stat1[4]; /* 0x400 - 0x40F */
u32 stat2[2]; /* 0x410 - 0x417 */
u32 statne_h; /* 0x418 - queue nearly empty */
u32 statf_h; /* 0x41C - queue full */
u32 irqsrc[4]; /* 0x420 - 0x42F IRC source */
u32 irqen[2]; /* 0x430 - 0x437 IRQ enabled */
u32 irqstat[2]; /* 0x438 - 0x43F - IRQ access only */
u32 reserved[1776];
u32 sram[2048]; /* 0x2000 - 0x3FFF - config and buffer */
};
void qmgr_set_irq(unsigned int queue, int src,
void (*handler)(void *pdev), void *pdev);
void qmgr_enable_irq(unsigned int queue);
void qmgr_disable_irq(unsigned int queue);
/* request_ and release_queue() must be called from non-IRQ context */
#if DEBUG_QMGR
extern char qmgr_queue_descs[QUEUES][32];
int qmgr_request_queue(unsigned int queue, unsigned int len /* dwords */,
unsigned int nearly_empty_watermark,
unsigned int nearly_full_watermark,
const char *desc_format, const char* name);
#else
int __qmgr_request_queue(unsigned int queue, unsigned int len /* dwords */,
unsigned int nearly_empty_watermark,
unsigned int nearly_full_watermark);
#define qmgr_request_queue(queue, len, nearly_empty_watermark, \
nearly_full_watermark, desc_format, name) \
__qmgr_request_queue(queue, len, nearly_empty_watermark, \
nearly_full_watermark)
#endif
void qmgr_release_queue(unsigned int queue);
static inline void qmgr_put_entry(unsigned int queue, u32 val)
{
struct qmgr_regs __iomem *qmgr_regs = IXP4XX_QMGR_BASE_VIRT;
#if DEBUG_QMGR
BUG_ON(!qmgr_queue_descs[queue]); /* not yet requested */
printk(KERN_DEBUG "Queue %s(%i) put %X\n",
qmgr_queue_descs[queue], queue, val);
#endif
__raw_writel(val, &qmgr_regs->acc[queue][0]);
}
static inline u32 qmgr_get_entry(unsigned int queue)
{
u32 val;
const struct qmgr_regs __iomem *qmgr_regs = IXP4XX_QMGR_BASE_VIRT;
val = __raw_readl(&qmgr_regs->acc[queue][0]);
#if DEBUG_QMGR
BUG_ON(!qmgr_queue_descs[queue]); /* not yet requested */
printk(KERN_DEBUG "Queue %s(%i) get %X\n",
qmgr_queue_descs[queue], queue, val);
#endif
return val;
}
static inline int __qmgr_get_stat1(unsigned int queue)
{
const struct qmgr_regs __iomem *qmgr_regs = IXP4XX_QMGR_BASE_VIRT;
return (__raw_readl(&qmgr_regs->stat1[queue >> 3])
>> ((queue & 7) << 2)) & 0xF;
}
static inline int __qmgr_get_stat2(unsigned int queue)
{
const struct qmgr_regs __iomem *qmgr_regs = IXP4XX_QMGR_BASE_VIRT;
BUG_ON(queue >= HALF_QUEUES);
return (__raw_readl(&qmgr_regs->stat2[queue >> 4])
>> ((queue & 0xF) << 1)) & 0x3;
}
/**
* qmgr_stat_empty() - checks if a hardware queue is empty
* @queue: queue number
*
* Returns non-zero value if the queue is empty.
*/
static inline int qmgr_stat_empty(unsigned int queue)
{
BUG_ON(queue >= HALF_QUEUES);
return __qmgr_get_stat1(queue) & QUEUE_STAT1_EMPTY;
}
/**
* qmgr_stat_below_low_watermark() - checks if a queue is below low watermark
* @queue: queue number
*
* Returns non-zero value if the queue is below low watermark.
*/
static inline int qmgr_stat_below_low_watermark(unsigned int queue)
{
const struct qmgr_regs __iomem *qmgr_regs = IXP4XX_QMGR_BASE_VIRT;
if (queue >= HALF_QUEUES)
return (__raw_readl(&qmgr_regs->statne_h) >>
(queue - HALF_QUEUES)) & 0x01;
return __qmgr_get_stat1(queue) & QUEUE_STAT1_NEARLY_EMPTY;
}
/**
* qmgr_stat_above_high_watermark() - checks if a queue is above high watermark
* @queue: queue number
*
* Returns non-zero value if the queue is above high watermark
*/
static inline int qmgr_stat_above_high_watermark(unsigned int queue)
{
BUG_ON(queue >= HALF_QUEUES);
return __qmgr_get_stat1(queue) & QUEUE_STAT1_NEARLY_FULL;
}
/**
* qmgr_stat_full() - checks if a hardware queue is full
* @queue: queue number
*
* Returns non-zero value if the queue is full.
*/
static inline int qmgr_stat_full(unsigned int queue)
{
const struct qmgr_regs __iomem *qmgr_regs = IXP4XX_QMGR_BASE_VIRT;
if (queue >= HALF_QUEUES)
return (__raw_readl(&qmgr_regs->statf_h) >>
(queue - HALF_QUEUES)) & 0x01;
return __qmgr_get_stat1(queue) & QUEUE_STAT1_FULL;
}
/**
* qmgr_stat_underflow() - checks if a hardware queue experienced underflow
* @queue: queue number
*
* Returns non-zero value if the queue experienced underflow.
*/
static inline int qmgr_stat_underflow(unsigned int queue)
{
return __qmgr_get_stat2(queue) & QUEUE_STAT2_UNDERFLOW;
}
/**
* qmgr_stat_overflow() - checks if a hardware queue experienced overflow
* @queue: queue number
*
* Returns non-zero value if the queue experienced overflow.
*/
static inline int qmgr_stat_overflow(unsigned int queue)
{
return __qmgr_get_stat2(queue) & QUEUE_STAT2_OVERFLOW;
}
#endif

68
arch/arm/mach-ixp4xx/irqs.h Normal file
View File

@ -0,0 +1,68 @@
/*
* arch/arm/mach-ixp4xx/include/mach/irqs.h
*
* IRQ definitions for IXP4XX based systems
*
* Copyright (C) 2002 Intel Corporation.
* Copyright (C) 2003 MontaVista Software, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
#ifndef _ARCH_IXP4XX_IRQS_H_
#define _ARCH_IXP4XX_IRQS_H_
#define IRQ_IXP4XX_BASE 16
#define IRQ_IXP4XX_NPEA (IRQ_IXP4XX_BASE + 0)
#define IRQ_IXP4XX_NPEB (IRQ_IXP4XX_BASE + 1)
#define IRQ_IXP4XX_NPEC (IRQ_IXP4XX_BASE + 2)
#define IRQ_IXP4XX_QM1 (IRQ_IXP4XX_BASE + 3)
#define IRQ_IXP4XX_QM2 (IRQ_IXP4XX_BASE + 4)
#define IRQ_IXP4XX_TIMER1 (IRQ_IXP4XX_BASE + 5)
#define IRQ_IXP4XX_GPIO0 (IRQ_IXP4XX_BASE + 6)
#define IRQ_IXP4XX_GPIO1 (IRQ_IXP4XX_BASE + 7)
#define IRQ_IXP4XX_PCI_INT (IRQ_IXP4XX_BASE + 8)
#define IRQ_IXP4XX_PCI_DMA1 (IRQ_IXP4XX_BASE + 9)
#define IRQ_IXP4XX_PCI_DMA2 (IRQ_IXP4XX_BASE + 10)
#define IRQ_IXP4XX_TIMER2 (IRQ_IXP4XX_BASE + 11)
#define IRQ_IXP4XX_USB (IRQ_IXP4XX_BASE + 12)
#define IRQ_IXP4XX_UART2 (IRQ_IXP4XX_BASE + 13)
#define IRQ_IXP4XX_TIMESTAMP (IRQ_IXP4XX_BASE + 14)
#define IRQ_IXP4XX_UART1 (IRQ_IXP4XX_BASE + 15)
#define IRQ_IXP4XX_WDOG (IRQ_IXP4XX_BASE + 16)
#define IRQ_IXP4XX_AHB_PMU (IRQ_IXP4XX_BASE + 17)
#define IRQ_IXP4XX_XSCALE_PMU (IRQ_IXP4XX_BASE + 18)
#define IRQ_IXP4XX_GPIO2 (IRQ_IXP4XX_BASE + 19)
#define IRQ_IXP4XX_GPIO3 (IRQ_IXP4XX_BASE + 20)
#define IRQ_IXP4XX_GPIO4 (IRQ_IXP4XX_BASE + 21)
#define IRQ_IXP4XX_GPIO5 (IRQ_IXP4XX_BASE + 22)
#define IRQ_IXP4XX_GPIO6 (IRQ_IXP4XX_BASE + 23)
#define IRQ_IXP4XX_GPIO7 (IRQ_IXP4XX_BASE + 24)
#define IRQ_IXP4XX_GPIO8 (IRQ_IXP4XX_BASE + 25)
#define IRQ_IXP4XX_GPIO9 (IRQ_IXP4XX_BASE + 26)
#define IRQ_IXP4XX_GPIO10 (IRQ_IXP4XX_BASE + 27)
#define IRQ_IXP4XX_GPIO11 (IRQ_IXP4XX_BASE + 28)
#define IRQ_IXP4XX_GPIO12 (IRQ_IXP4XX_BASE + 29)
#define IRQ_IXP4XX_SW_INT1 (IRQ_IXP4XX_BASE + 30)
#define IRQ_IXP4XX_SW_INT2 (IRQ_IXP4XX_BASE + 31)
#define IRQ_IXP4XX_USB_HOST (IRQ_IXP4XX_BASE + 32)
#define IRQ_IXP4XX_I2C (IRQ_IXP4XX_BASE + 33)
#define IRQ_IXP4XX_SSP (IRQ_IXP4XX_BASE + 34)
#define IRQ_IXP4XX_TSYNC (IRQ_IXP4XX_BASE + 35)
#define IRQ_IXP4XX_EAU_DONE (IRQ_IXP4XX_BASE + 36)
#define IRQ_IXP4XX_SHA_DONE (IRQ_IXP4XX_BASE + 37)
#define IRQ_IXP4XX_SWCP_PE (IRQ_IXP4XX_BASE + 58)
#define IRQ_IXP4XX_QM_PE (IRQ_IXP4XX_BASE + 60)
#define IRQ_IXP4XX_MCU_ECC (IRQ_IXP4XX_BASE + 61)
#define IRQ_IXP4XX_EXP_PE (IRQ_IXP4XX_BASE + 62)
#define _IXP4XX_GPIO_IRQ(n) (IRQ_IXP4XX_GPIO ## n)
#define IXP4XX_GPIO_IRQ(n) _IXP4XX_GPIO_IRQ(n)
#define XSCALE_PMU_IRQ (IRQ_IXP4XX_XSCALE_PMU)
#endif

2
arch/arm/mach-ixp4xx/ixdp425-pci.c
View File

@ -24,6 +24,8 @@
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include "irqs.h"
#define MAX_DEV 4
#define IRQ_LINES 4

2
arch/arm/mach-ixp4xx/ixdp425-setup.c
View File

@ -32,6 +32,8 @@
#include <asm/mach/arch.h>
#include <asm/mach/flash.h>
#include "irqs.h"
#define IXDP425_SDA_PIN 7
#define IXDP425_SCL_PIN 6

2
arch/arm/mach-ixp4xx/ixdpg425-pci.c
View File

@ -23,6 +23,8 @@
#include <asm/mach/pci.h>
#include "irqs.h"
void __init ixdpg425_pci_preinit(void)
{
irq_set_irq_type(IRQ_IXP4XX_GPIO6, IRQ_TYPE_LEVEL_LOW);

60
arch/arm/mach-ixp4xx/ixp4xx-of.c Normal file
View File

@ -0,0 +1,60 @@
// SPDX-License-Identifier: GPL-2.0
/*
* IXP4xx Device Tree boot support
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/io.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <mach/hardware.h>
#include <mach/ixp4xx-regs.h>
static struct map_desc ixp4xx_of_io_desc[] __initdata = {
/*
* This is needed for runtime system configuration checks,
* such as reading if hardware so-and-so is present. This
* could eventually be converted into a syscon once all boards
* are converted to device tree.
*/
{
.virtual = IXP4XX_EXP_CFG_BASE_VIRT,
.pfn = __phys_to_pfn(IXP4XX_EXP_CFG_BASE_PHYS),
.length = SZ_4K,
.type = MT_DEVICE,
},
#ifdef CONFIG_DEBUG_UART_8250
/* This is needed for LL-debug/earlyprintk/debug-macro.S */
{
.virtual = CONFIG_DEBUG_UART_VIRT,
.pfn = __phys_to_pfn(CONFIG_DEBUG_UART_PHYS),
.length = SZ_4K,
.type = MT_DEVICE,
},
#endif
};
static void __init ixp4xx_of_map_io(void)
{
iotable_init(ixp4xx_of_io_desc, ARRAY_SIZE(ixp4xx_of_io_desc));
}
/*
* We handle 4 differen SoC families. These compatible strings are enough
* to provide the core so that different boards can add their more detailed
* specifics.
*/
static const char *ixp4xx_of_board_compat[] = {
"intel,ixp42x",
"intel,ixp43x",
"intel,ixp45x",
"intel,ixp46x",
NULL,
};
DT_MACHINE_START(IXP4XX_DT, "IXP4xx (Device Tree)")
.map_io = ixp4xx_of_map_io,
.dt_compat = ixp4xx_of_board_compat,
MACHINE_END

2
arch/arm/mach-ixp4xx/nas100d-pci.c
View File

@ -21,6 +21,8 @@
#include <asm/mach/pci.h>
#include <asm/mach-types.h>
#include "irqs.h"
#define MAX_DEV 3
#define IRQ_LINES 3

5
arch/arm/mach-ixp4xx/nas100d-setup.c
View File

@ -34,6 +34,8 @@
#include <asm/mach/arch.h>
#include <asm/mach/flash.h>
#include "irqs.h"
#define NAS100D_SDA_PIN 5
#define NAS100D_SCL_PIN 6
@ -279,9 +281,6 @@ static void __init nas100d_init(void)
ixp4xx_sys_init();
/* gpio 14 and 15 are _not_ clocks */
*IXP4XX_GPIO_GPCLKR = 0;
nas100d_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
nas100d_flash_resource.end =
IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1;

2
arch/arm/mach-ixp4xx/nslu2-pci.c
View File

@ -21,6 +21,8 @@
#include <asm/mach/pci.h>
#include <asm/mach-types.h>
#include "irqs.h"
#define MAX_DEV 3
#define IRQ_LINES 3

12
arch/arm/mach-ixp4xx/nslu2-setup.c
View File

@ -32,6 +32,8 @@
#include <asm/mach/flash.h>
#include <asm/mach/time.h>
#include "irqs.h"
#define NSLU2_SDA_PIN 7
#define NSLU2_SCL_PIN 6
@ -125,10 +127,18 @@ static struct platform_device nslu2_i2c_gpio = {
},
};
static struct resource nslu2_beeper_resources[] = {
{
.start = IRQ_IXP4XX_TIMER2,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device nslu2_beeper = {
.name = "ixp4xx-beeper",
.id = NSLU2_GPIO_BUZZ,
.num_resources = 0,
.resource = nslu2_beeper_resources,
.num_resources = ARRAY_SIZE(nslu2_beeper_resources),
};
static struct resource nslu2_uart_resources[] = {

2
arch/arm/mach-ixp4xx/wg302v2-pci.c
View File

@ -27,6 +27,8 @@
#include <asm/mach/pci.h>
#include "irqs.h"
void __init wg302v2_pci_preinit(void)
{
irq_set_irq_type(IRQ_IXP4XX_GPIO8, IRQ_TYPE_LEVEL_LOW);

2
arch/arm/mach-ixp4xx/wg302v2-setup.c
View File

@ -29,6 +29,8 @@
#include <asm/mach/arch.h>
#include <asm/mach/flash.h>
#include "irqs.h"
static struct flash_platform_data wg302v2_flash_data = {
.map_name = "cfi_probe",
.width = 2,

42
arch/arm/mach-lpc32xx/phy3250.c
View File

@ -1,3 +1,4 @@
// SPDX-License-Identifier: GPL-2.0+
/*
* Platform support for LPC32xx SoC
*
@ -5,44 +6,14 @@
*
* Copyright (C) 2012 Roland Stigge <stigge@antcom.de>
* Copyright (C) 2010 NXP Semiconductors
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/device.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/dma-mapping.h>
#include <linux/gpio.h>
#include <linux/amba/bus.h>
#include <linux/amba/clcd.h>
#include <linux/amba/pl08x.h>
#include <linux/amba/mmci.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_irq.h>
#include <linux/of_platform.h>
#include <linux/clk.h>
#include <linux/mtd/lpc32xx_slc.h>
#include <linux/mtd/lpc32xx_mlc.h>
#include <linux/mtd/lpc32xx_slc.h>
#include <linux/of_platform.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <mach/hardware.h>
#include <mach/platform.h>
#include <mach/board.h>
#include "common.h"
static struct pl08x_channel_data pl08x_slave_channels[] = {
@ -90,8 +61,6 @@ static struct lpc32xx_mlc_platform_data lpc32xx_mlc_data = {
};
static const struct of_dev_auxdata lpc32xx_auxdata_lookup[] __initconst = {
OF_DEV_AUXDATA("arm,pl022", 0x20084000, "dev:ssp0", NULL),
OF_DEV_AUXDATA("arm,pl022", 0x2008C000, "dev:ssp1", NULL),
OF_DEV_AUXDATA("arm,pl080", 0x31000000, "pl08xdmac", &pl08x_pd),
OF_DEV_AUXDATA("nxp,lpc3220-slc", 0x20020000, "20020000.flash",
&lpc32xx_slc_data),
@ -104,11 +73,6 @@ static void __init lpc3250_machine_init(void)
{
lpc32xx_serial_init();
/* Test clock needed for UDA1380 initial init */
__raw_writel(LPC32XX_CLKPWR_TESTCLK2_SEL_MOSC |
LPC32XX_CLKPWR_TESTCLK_TESTCLK2_EN,
LPC32XX_CLKPWR_TEST_CLK_SEL);
of_platform_default_populate(NULL, lpc32xx_auxdata_lookup, NULL);
}

9
arch/arm/mach-omap2/common.h
View File

@ -336,6 +336,15 @@ static inline void omap5_secondary_hyp_startup(void)
}
#endif
#ifdef CONFIG_SOC_DRA7XX
extern int dra7xx_pciess_reset(struct omap_hwmod *oh);
#else
static inline int dra7xx_pciess_reset(struct omap_hwmod *oh)
{
return 0;
}
#endif
void pdata_quirks_init(const struct of_device_id *);
void omap_auxdata_legacy_init(struct device *dev);
void omap_pcs_legacy_init(int irq, void (*rearm)(void));

11
arch/arm/mach-omap2/i2c.c
View File

@ -53,15 +53,10 @@ int omap_i2c_reset(struct omap_hwmod *oh)
u16 i2c_con;
int c = 0;
if (oh->class->rev == OMAP_I2C_IP_VERSION_2) {
i2c_con = OMAP4_I2C_CON_OFFSET;
} else if (oh->class->rev == OMAP_I2C_IP_VERSION_1) {
if (soc_is_omap24xx() || soc_is_omap34xx() || soc_is_am35xx())
i2c_con = OMAP2_I2C_CON_OFFSET;
} else {
WARN(1, "Cannot reset I2C block %s: unsupported revision\n",
oh->name);
return -EINVAL;
}
else
i2c_con = OMAP4_I2C_CON_OFFSET;
/* Disable I2C */
v = omap_hwmod_read(oh, i2c_con);

Some files were not shown because too many files have changed in this diff Show More