This binding is for LPASS has internal codec RX macro which is
for connecting with SoundWire RX codecs like WCD938x.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210211122735.5691-2-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
SoundWire machine drivers make a heavy use of component prefixes to
uniquify control names. This however results in errors when looking
for widgets or pins. This patchset suggests two solutions but feedback
or suggestions on how to take the prefix into account would be
welcome.
Bard Liao (1):
ASoC: Intel: boards: max98373: get dapm from cpu_dai
Shuming Fan (1):
ASoC: dapm: use component prefix when checking widget names
sound/soc/intel/boards/sof_maxim_common.c | 5 +++--
sound/soc/soc-dapm.c | 13 ++++++++++++-
2 files changed, 15 insertions(+), 3 deletions(-)
--
2.25.1
HP Spectre x360 convertible devices rely on a mixed SoundWire+DMIC
configuration which wasn't well supported. This lead to the discovery
that we missed the TGL_HDMI quirk on a number of Dell devices, the
addition of DMIC autodetection (based on NHLT tables), the addition of
new component strings needed by UCM, and work-arounds due to
problematic DSDT tables.
Changes since v1:
Rebase to remove first three patches already merged.
Fix allmodconfig issues (undeclared kernel parameter)
Bard Liao (1):
ASoC: intel: sof_sdw: add trace for dai links
Guennadi Liakhovetski (1):
ASoC: SOF: Intel: HDA: don't keep a temporary variable
Pierre-Louis Bossart (8):
ASoC: Intel: sof_sdw: reorganize quirks by generation
ASoC: Intel: sof-sdw: indent and add quirks consistently
ASoC: Intel: sof_sdw: add quirk for HP Spectre x360 convertible
ASoC: Intel: sof_sdw: add mic:dmic and cfg-mics component strings
ASoC: Intel: soc-acpi: add ACPI matching table for HP Spectre x360
ASoC: SOF: Intel: SoundWire: refine ACPI match
ASoC: SOF: Intel: detect DMIC number in SoundWire mixed config
ASoC: SOF: Intel: hda: add dev_dbg() when DMIC number is overridden
Rander Wang (1):
ASoC: Intel: sof_sdw: detect DMIC number based on mach params
sound/soc/intel/boards/sof_sdw.c | 134 ++++++-----
.../intel/common/soc-acpi-intel-tgl-match.c | 20 ++
sound/soc/sof/intel/hda.c | 212 ++++++++++++------
3 files changed, 244 insertions(+), 122 deletions(-)
--
2.25.1
With current delayed probe implementation, sof_probe_complete is not
called in case of errors. And as this function is responsible for
decrementing runtime pm usage counter, this will result in following
problem:
- probe driver in conditions where probe will fail (to force
the condition on Intel SOF systems, set
"snd_sof_intel_hda_common.codec_mask=0")
- unload driver (runtime-pm usage_count is leaked)
- fix the issue by installing missing fw, modifying module parameters,
etc actions
- try to load driver again -> success, probe ok
-> device never enters runtime suspend
Fix the issue by storing result of delayed probe to a state variable and
providing new snd_sof_device_probe_completed() to be queried from SOF
PCI/ACPI/OF drivers.
If probe never completed successfully, runtime PM was not set up and
thus at remove(), we should not increment usage count anymore.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@intel.com>
Link: https://lore.kernel.org/r/20210210105237.2179273-1-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This log message should be a debug message, because it
doesn't return directly but continue next loop.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/1612771965-5776-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
It's useful for debug and system integration to show cases where we
ignore the number of microphones reported by NHLT.
Suggested-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20210208233336.59449-12-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
fixup_tplg_name() doesn't need to keep the string, allocated for
filename - it's temporary.
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@intel.com>
Link: https://lore.kernel.org/r/20210208233336.59449-11-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The pinmux allows for 2 SoundWire links to be enabled along with
DMICs. This was the default configuration on the TGL-RVP.
One issue with this configuration is that we don't have a means to
automatically detect how many DMICs are used, which in turn requires
the user to manually rename the topology file required on a platform.
This was borderline acceptable for Intel RVPs, but now that this
configuration is present in HP devices we need to automate the
process.
This patch makes use of the NHLT information and will pass the DMIC
number to the machine driver as a parameter. A follow-up patch will
expose the DMIC number to userspace/UCM with the configuration strings.
The Google devices do make use of DMICs instead of SoundWire link 2
and 3, but their topology is unique enough that they do not need any
NHTL support or topology renaming.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20210208233336.59449-10-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We have existing platforms where the wrong machine is selected. We
need to make sure the number of devices reported on a link matches
what we expect for a link descriptor. This helps avoid using the
TGL-RVP configuration for an HP platform or vice-versa, depending on
the order in which they are inserted in the table.
Co-developed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Bard Liao <bard.liao@intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@intel.com>
Link: https://lore.kernel.org/r/20210208233336.59449-9-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This device only has a single amplifier on link1, so we need a
dedicated entry to find a match.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Bard Liao <bard.liao@intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@intel.com>
Link: https://lore.kernel.org/r/20210208233336.59449-8-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We create dai links dynamically, so it is not easy to know what dai
links are created. So adding trace for dai link name and id.
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@intel.com>
Link: https://lore.kernel.org/r/20210208233336.59449-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Current driver create DMIC dai based on quirk for each platforms,
so we need to add quirk for new platforms. Now driver reports DMIC
number to machine driver and machine driver can create DMIC dai based
on this information. The old check is reserved for some platforms
may be failed to set the DMIC number in BIOS.
Reviewed-by: Bard Liao <bard.liao@intel.com>
Signed-off-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210208233336.59449-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
UCM needs to know which microphone is used (dmic or RT715-based),
let's add the information in the component string.
Note the slight change from HDAudio platforms where 'cfg-dmics' was
used. 'cfg-mics' is used here with the intent that this component
string describes either the number of PCH-attached microphones or the
number of RT715-attached ones (the assumption is that the two
configurations are mutually exclusive).
Suggested-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20210208233336.59449-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the same style for all quirks to avoid misses and errors
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20210208233336.59449-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The quirk table is a mess, let's reorganize it by generation before
making sure that the quirks are consistent for each generation.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20210208233336.59449-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use explicit number to define elem_type enum instead of using
SOF_IPC_EXT_*.
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Karol Trzciński <karolx.trzcinski@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Fred Oh <fred.oh@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210208232149.58899-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Simplify hda_dsp_d0i3_work() by returning immediately from it
if D0i3 cannot be set.
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Libin Yang <libin.yang@intel.com>
Reviewed-by: Keyon Jie <yang.jie@intel.com>
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210208232149.58899-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
hda_dsp_dump_skl() is never used and hda_dsp_get_status_skl() is
only called from that function. Remove both functions.
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Keyon Jie <yang.jie@intel.com>
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210208232149.58899-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
These are negative error return values, printing them as hex is annoying
and not beneficial. Switch back to signed type to make error lookup
simpler.
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@gmail.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Curtis Malainey <cujomalainey@chromium.org>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210208232149.58899-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Type is not part of debugging parse code. Add it so unknown types don't
show up while debugging
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Curtis Malainey <cujomalainey@chromium.org>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210208232149.58899-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There is a prefix on max98373 codec, and the prefix will be added to
the pin name However, there is no prefix on the "Right Spk" and "Left
Spk" widgets.
To avoid getting a redundant prefix, we should get dapm from cpu_dai
component.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210208234043.59750-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
On a TigerLake SoundWire platform, we see these warnings:
[ 27.360086] rt5682 sdw:0:25d:5682:0: ASoC: DAPM unknown pin MICBIAS
[ 27.360092] rt5682 sdw:0:25d:5682:0: ASoC: DAPM unknown pin Vref2
This is root-caused to the addition of a component prefix in the
machine driver. The tests in soc-dapm should account for a prefix
instead of reporting an invalid issue.
Reported-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@linux.intel.com>
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210208234043.59750-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Hi All,
Here is v4 of my series to add support for Intel Bay Trail based devices
which use a WM5102 codec for audio output/input.
This was developed and tested on a Lenovo Yoga Tablet 1051L.
The MFD and ASoC parts do not have any build-time dependencies
on each other. But the follow-up jack-detect series does have
patches depending on each-other and on this series. So IMHO it
would be best if this entire series would be merged through the
MFD tree to make merging the follow-up series easier.
Mark, if that is ok with you (and you are happy with the ASoC
changes) can you please Ack this ?
Changes in v4:
- Add a comment to the irq-flags override explaining that theoretically
DSDTs using IRQF_TRIGGER_FALLING could be correct on boards where the
IRQ controller does not support active low level interrupts
Changes in v3:
- Fix compilation error when CONFIG_ACPI is not set
Changes in v2:
- Split my WM5102 work into 2 series, one series adding basic support
for Bay Trail boards with a WM5102 codec and a second series with
the jack-detect work
- Various other minor code tweaks
Hans de Goede (4):
mfd: arizona: Add MODULE_SOFTDEP("pre: arizona_ldo1")
mfd: arizona: Replace arizona_of_get_type() with
device_get_match_data()
mfd: arizona: Add support for ACPI enumeration of WM5102 connected
over SPI
ASoC: Intel: Add DMI quirk table to soc_intel_is_byt_cr()
Pierre-Louis Bossart (1):
ASoC: Intel: bytcr_wm5102: Add machine driver for BYT/WM5102
drivers/mfd/arizona-core.c | 11 -
drivers/mfd/arizona-i2c.c | 11 +-
drivers/mfd/arizona-spi.c | 138 +++++-
drivers/mfd/arizona.h | 9 -
sound/soc/intel/boards/Kconfig | 12 +
sound/soc/intel/boards/Makefile | 2 +
sound/soc/intel/boards/bytcr_wm5102.c | 465 ++++++++++++++++++
.../intel/common/soc-acpi-intel-byt-match.c | 16 +
sound/soc/intel/common/soc-intel-quirks.h | 25 +
9 files changed, 661 insertions(+), 28 deletions(-)
create mode 100644 sound/soc/intel/boards/bytcr_wm5102.c
Regards,
Hans
Add a new ASoc Machine driver for Intel Baytrail platforms with a
Wolfson Microelectronics WM5102 codec.
This is based on a past contributions [1] from Paulo Sergio Travaglia
<pstglia@gmail.com> based on the Levono kernel [2] combined with
insights in things like the speaker GPIO from the android-x86 android
port for the Lenovo Yoga Tablet 2 1051F/L [3].
[1] https://patchwork.kernel.org/project/alsa-devel/patch/593313f5.3636c80a.50e05.47e9@mx.google.com/
[2] https://github.com/lenovo-yt2-dev/android_kernel_lenovo_baytrail/blob/cm-12.1/sound/soc/intel/board/byt_bl_wm5102.c
[3] https://github.com/Kitsune2222/Android_Yoga_Tablet_2-1051F_Kernel
The original machine driver from the Android ports was a crude modified
copy of bytcr_rt5640.c adjusted to work with the WM5102 codec.
This version has been extensively reworked to:
1. Remove all rt5640 related quirk handling. to the best of my knowledge
this setup is only used on the Lenovo Yoga Tablet 2 series (8, 10 and 13
inch models) which all use the same setup. So there is no need to deal
with all the variations with which we need to deal on rt5640 boards.
2. Rework clock handling, properly turn off the FLL and the platform-clock
when they are no longer necessary and don't reconfigure the FLL
unnecessarily when it is already running. This fixes a number of:
"Timed out waiting for lock" warnings being logged.
3. Add the GPIO controlled Speaker-VDD regulator as a DAPM_SUPPLY
This only adds the machine driver and ACPI hooks, the BYT-CR detection
quirk which these devices need will be added in a separate patch.
BugLink: https://github.com/thesofproject/linux/issues/2485
Co-authored-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210120214957.140232-6-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Some Bay Trail systems:
1. Use a non CR version of the Bay Trail SoC
2. Contain at least 6 interrupt resources so that the
platform_get_resource(pdev, IORESOURCE_IRQ, 5) check to workaround
non CR systems which list their IPC IRQ at index 0 despite being
non CR does not work
3. Despite 1. and 2. still have their IPC IRQ at index 0 rather then 5
Add a DMI quirk table to check for the few known models with this issue,
so that the right IPC IRQ index is used on these systems.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210120214957.140232-5-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add the ingenic,jz4760b-codec and ingenic,jz4760-codec compatible
strings.
In the process, convert the previous compatible strings to use an enum
instead.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20210123140958.12895-1-paul@crapouillou.net
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support for the internal codec found in the JZ4760 SoC from Ingenic.
Signed-off-by: Christophe Branchereau <cbranchereau@gmail.com>
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20210123140958.12895-3-paul@crapouillou.net
Signed-off-by: Mark Brown <broonie@kernel.org>
No need to show the options to build Ingenic-specific drivers on all
MIPS kernel configurations if Ingenic SoCs support is not enabled.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20210123140958.12895-2-paul@crapouillou.net
Signed-off-by: Mark Brown <broonie@kernel.org>
The below patch series are to support Audio over HDMI.
The modification in this patch series shall allow I2S driver
to playback standard PCM format and IEC958 encoded format to
the ADV7511 HDMI chip.
ALSA IEC958 plugin will be used to compose the IEC958 format.
Existing hdmi-codec driver only support standard pcm format.
Support of IEC958 encoded format passdown from ALSA IEC958 plugin
is needed so that the IEC958 encoded data can be streamed to the
HDMI chip.
Sia Jee Heng (4):
ASoC: codec: hdmi-codec: Support IEC958 encoded PCM format
drm: bridge: adv7511: Support I2S IEC958 encoded PCM format
dt-bindings: sound: Intel, Keembay-i2s: Add hdmi-i2s compatible string
ASoC: Intel: KMB: Support IEC958 encoded PCM format
.../bindings/sound/intel,keembay-i2s.yaml | 1 +
drivers/gpu/drm/bridge/adv7511/adv7511.h | 1 +
.../gpu/drm/bridge/adv7511/adv7511_audio.c | 6 ++
include/sound/hdmi-codec.h | 5 ++
sound/soc/codecs/hdmi-codec.c | 4 +-
sound/soc/intel/keembay/kmb_platform.c | 73 ++++++++++++++++++-
sound/soc/intel/keembay/kmb_platform.h | 1 +
7 files changed, 89 insertions(+), 2 deletions(-)
base-commit: 2557c711b87cd42bb22be9ca6ff3fce038624f30
--
2.18.0
The 'imx' field is not used anywhere, so get rid of it.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Link: https://lore.kernel.org/r/20210206142753.536459-1-festevam@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The only usage of these is to assign their address to the 'ops' field in
the snd_soc_dai_driver struct, which is a pointer to const. Make them
const to allow the compiler to put them in read-only memory.
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Link: https://lore.kernel.org/r/20210206225849.51071-1-rikard.falkeborn@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Support ALSA IEC958 plugin for KeemBay I2S driver.
Bit manipulation needed as IEC958 format supported by ADV7511 HDMI chip
is not compatible with the ALSA IEC958 plugin format.
Signed-off-by: Sia Jee Heng <jee.heng.sia@intel.com>
Link: https://lore.kernel.org/r/20210204014258.10197-5-jee.heng.sia@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Existing hdmi-codec driver only support standard pcm format.
Support of IEC958 encoded format pass from ALSA IEC958 plugin is needed
so that the IEC958 encoded data can be streamed to the HDMI chip.
Signed-off-by: Sia Jee Heng <jee.heng.sia@intel.com>
Link: https://lore.kernel.org/r/20210204014258.10197-2-jee.heng.sia@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There is cleanup required, related to release of phandles, during driver
removal and hence point remove callback to audio_graph_remove().
Fixes: 202e2f7745 ("ASoC: tegra: Add audio graph based card driver")
Depends-on: "ASoC: audio-graph: Rename functions needed for export"
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/1612719418-5858-3-git-send-email-spujar@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Following functions are renamed for a better global visibility.
graph_card_probe() --> audio_graph_card_probe()
graph_parse_of() --> audio_graph_parse_of()
graph_remove() --> audio_graph_remove() [exported as well]
The references of these are updated in audio graph and Tegra audio
graph card drivers.
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/1612719418-5858-2-git-send-email-spujar@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
To improve human readability and enable automatic validation, the tuples
in "playback" and "capture" properties in sound device nodes should be
grouped using angle brackets.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20210204130022.1646427-1-geert+renesas@glider.be
Signed-off-by: Mark Brown <broonie@kernel.org>
The commit e7bbb7acab ("dmaengine: add peripheral configuration")
adds peripheral configuration for dma_slave_config.
This configuration is useful for some audio peripherals, for
example, the peripheral supports multi fifos, we can
let the DMA know which fifos are selected. So also add
this configuration for snd_dmaengine_dai_dma_data.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1612509985-11063-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add master clock generation support in STM32 I2S driver.
The master clock provided by I2S can be used to feed a codec.
Signed-off-by: Olivier Moysan <olivier.moysan@foss.st.com>
Link: https://lore.kernel.org/r/20210205104404.18786-3-olivier.moysan@foss.st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
HP Spectre x360 convertible devices rely on a mixed SoundWire+DMIC
configuration which wasn't well supported. This lead to the discovery
that we missed the TGL_HDMI quirk on a number of Dell devices, the
addition of DMIC autodetection (based on NHLT tables), the addition of
new component strings needed by UCM, and work-arounds due to
problematic DSDT tables.
Bard Liao (1):
ASoC: Intel: sof_sdw: add trace for dai links
Guennadi Liakhovetski (1):
ASoC: SOF: Intel: HDA: don't keep a temporary variable
Pierre-Louis Bossart (11):
ASoC: Intel: sof_sdw: add missing TGL_HDMI quirk for Dell SKU 0A3E
ASoC: Intel: sof_sdw: add missing TGL_HDMI quirk for Dell SKU 0A5E
ASoC: Intel: sof_sdw: add missing TGL_HDMI quirk for Dell SKU 0A32
ASoC: Intel: sof_sdw: reorganize quirks by generation
ASoC: Intel: sof-sdw: indent and add quirks consistently
ASoC: Intel: sof_sdw: add quirk for HP Spectre x360 convertible
ASoC: Intel: sof_sdw: add mic:dmic and cfg-mics component strings
ASoC: Intel: soc-acpi: add ACPI matching table for HP Spectre x360
ASoC: SOF: Intel: SoundWire: refine ACPI match
ASoC: SOF: Intel: detect DMIC number in SoundWire mixed config
ASoC: SOF: Intel: hda: add dev_dbg() when DMIC number is overridden
Rander Wang (1):
ASoC: Intel: sof_sdw: detect DMIC number based on mach params
sound/soc/intel/boards/sof_sdw.c | 131 ++++++-----
.../intel/common/soc-acpi-intel-tgl-match.c | 20 ++
sound/soc/sof/intel/hda.c | 208 ++++++++++++------
3 files changed, 241 insertions(+), 118 deletions(-)
--
2.25.1
regcache sync will be done in sdw device suspend/resume functions.
And we have different jack detection mechanism for SoundWire.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210204201739.25206-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Follow pattern from other drivers and use cancel_work_sync() for both
.remove() and .suspend().
Fixes: 03f6fc6de9 ('ASoC: rt5682: Add the soundwire support')
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@linux.intel.com>
Link: https://lore.kernel.org/r/20210204201739.25206-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
