Replace all calls to the enum_mbus_fmt video op by the pad
enum_mbus_code op and remove the duplicate video op.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: Scott Jiang <scott.jiang.linux@gmail.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kamil Debski <k.debski@samsung.com>
Acked-by: Prabhakar Lad <prabhakar.csengg@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
There are a few lines longer than 80 cols for no good reason.
Fix them sooner than latter, making checkpatch.pl happy.
Cc: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Ensure that buffers are allocated from the DMA32 zone since this
device only handles 32 bit DMA addresses.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
The dt3155 code is now in good shape, so move it out of staging into
drivers/media/pci. Mark in MAINTAINERS that I'll do Odd Fixes for this
driver.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
The dt3155 together with the J1 breakout cable supports 4 inputs. Add
support for all inputs VID0 - VID3. Note that input VID0 is shared with
input J2.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Fix various v4l2-compliance issues regarding format handling.
Main problem was a missing colorspace value and incorrect format
checks. This driver supports a single format only.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
There is no need for CONFIG_DT3155_CCIR to select between 50/60 Hz,
that's why we have s_std.
Since this is a simple framegrabber there is no need for g/s_parm.
The frame period can be obtained via ENUMSTD instead.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Don't start streaming when a buffer is queued, instead implement the
start_streaming op and do it there, leaving it up to the vb2 framework
to call start_streaming when enough buffers have been queued.
And don't stop streaming from within the interrupt routine, instead do
that in stop_streaming.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
No need to do this as a config option. Just support both MMAP and read()
methods like any other driver.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Instead of initializing the vb2_queue in open (and freeing in release)
do this in probe/remove instead. And as a bonus use the vb2 helper
functions to greatly simplify the driver.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
For some weird reason an attempt is made in init_board to capture a
single frame. No clue why, and everything works fine without that
code.
I suspect this was test code that was never removed.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
No idea what the purpose is of these functions. I suspect this was used
once upon a time to pre-allocate buffer memory. But the allocated memory
isn't used anywhere anymore, so just remove this code.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Add struct v4l2_device and register it. Also move the request_irq to
probe instead of doing that in open().
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
- Fix various spelling mistakes
- Whitespace cleanups
- Remove _ioc_ from ioctl names to shorten those names
- Remove bogus ifdef __KERNEL__
- Remove commented out code
No actual code is changed in this patch.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
If i2c_add_adapter() fails, adap is not deallocated.
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
The REG_CTRL0 register was never written if this format was selected,
instead an error was logged and whatever was last set in that register
was used.
Surprisingly, that seems to work if YUYV was selected, but we should
program this register explicitly.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
I cannot get this format to work, the colors keep coming out wrong.
Since this has never worked I just drop support for this.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
These were calculated incorrectly for the planar formats.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Even though the format is Y'CbCr, the colorspace used by the sensor
is almost certainly SRGB. The sensor is also not generating JPEG data,
so it makes no sense to use V4L2_COLORSPACE_JPEG here.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
This driver appeared to support the JPEG format when in reality
that was just dead code. Remove it.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
The dma-vmalloc implementation didn't support planar formats, but with
a little bit of refactoring that is easy to fix.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
If start_streaming fails or stop_streaming is called, then all queued
buffers need to be given back to vb2.
This prevents vb2 from calling WARN_ON when it detects that this is not
done correctly.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
- fill in timestamp
- fill in field
- start the sequence counter at 0, not 1
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Add VB2_DMABUF and VIDIOC_EXPBUF support. Also add VB2_USERPTR support
for the vmalloc DMA mode which was missing for no good reason.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
This fixes the final v4l2-compliance warning.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Use the V4L2 core locking system instead of rolling your own. Switch to
the vb2 fop and ioctl helpers to get rid of a lot of code. This also made
it easy to add VB2_READ to the DMA modes, since you get read() for free
with vb2 and these helpers.
Finally remove the users field: this information is also available from
the core framework, no need to keep track of it in the driver.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Now that this driver uses v4l2_fh, it is trivial to add support for
control events. Again, this fixes a v4l2-compliance failure.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Use struct v4l2_fh to represent a filehandle. This fixes the missing
g/s_priority handling of this driver that v4l2-compliance complained
about.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
No controls were reported, even though the ov7670 does have controls.
Two reasons for this: the v4l2_ctrl_handler_init() call must come
before the ov7670 is loaded (otherwise the ov7670 won't know that
its controls should be added to the bridge driver), and the
v4l2_ctrl_handler_free() call at the end should only be called if
the ret value is non-zero (otherwise you would just free all the
controls that were just added).
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
The colorspace field wasn't filled in properly. This fixes a v4l2-compliance
failure.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
The width and height should be checked in the enum_frame_interval
op. This fixes a v4l2-compliance failure.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
TV standards make no sense for webcam drivers, so drop these dummy
functions. This stops v4l2-compliance from complaining about this.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
The bus_info field of struct v4l2_querycap wasn't filled in and
v4l2-compliance complained about that. Fix this.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
We must set timestamp_flags in vb2_queue otherwise vb2 will complain
loudly about it.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Running v4l2-compliance on my usbtv stick revealed two failures:
1) Correct handling of CREATE_BUFS in usbtv_queue_setup was missing. Added this.
2) The sequence counter wasn't reset to 0 when starting streaming.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
The patches that added support for HVR2255 and HVR2205 added
some CodingStyle issues.
Better to fix it sooner than latter.
Cc: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Fix the VIDIOC_QUERYCAP warning due to the missing device_caps. Don't fill
in the version field, the V4L2 core will do that for you.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Cc: <stable@vger.kernel.org> # for v3.19 and up
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
QAM mode in the LGDT3306 auto detects inversion. VSB does not.
Forgot to include tis fact in the original patch set.
Tested with QAM and VSB after this patch, working fine.
Signed-off-by: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Updates the copyright notes at the saa7164 driver.
Signed-off-by: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Adding support for the Hauppauge HVR2255 and Hauppauge HVR2205
PCIe cards. Digital TV for DVB-T and ATSC/US-Cable is known to
work. Support for analog RF tuners does not work due to
a lack of analog support in the upstream SI2157 driver.
Signed-off-by: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
SI2168/SI2157 issue single byte address reads. Add support
for these.
Signed-off-by: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
This needs to be signed or there is a risk of hitting a forever loop.
Fixes: c4c0283ab3 ('[media] media: i2c: add support for omnivision's ov2659 sensor')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Acked-by: Benoit Parrot <bparrot@ti.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Currently vb2 core acquires mmap_sem just around call to
__qbuf_userptr(). However since commit f035eb4e97 (videobuf2: fix
lockdep warning) it isn't necessary to acquire it so early as we no
longer have to drop queue mutex before acquiring mmap_sem. So push
acquisition of mmap_sem down into .get_userptr and .put_userptr memops
so that the semaphore is acquired for a shorter time and it is clearer
what it is needed for.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
This change will not change timing calculation. In CVT generator
spreadsheet the nominal value of hsync (as a percentage of line)
is 8 percent.
Cc: Martin Bugge <marbugge@cisco.com>
Signed-off-by: Prashant Laddha <prladdha@cisco.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Wrong values of hfreq and image height can lead to strange timings.
Avoid timing calculations for such values.
Suggested By: Martin Bugge <marbugge@cisco.com>
Cc: Martin Bugge <marbugge@cisco.com>
Signed-off-by: Prashant Laddha <prladdha@cisco.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Changed the rounding calculation for hblank and hsync to match it
to equations in cvt and gtf standards.
In cvt calculation, hsync needs to be rounded down.
In gtf calculations, hblank needs to be rounded to nearest multiple
of twice the cell granularity and hsync needs to be rounded to the
nearest multiple of cell granularity.
Cc: Martin Bugge <marbugge@cisco.com>
Signed-off-by: Prashant Laddha <prladdha@cisco.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
