In-kernel notifications are already sent when the multipath hash policy
itself changes, but not when the multipath hash fields change.
Add these notifications, so that interested listeners (e.g., switch ASIC
drivers) could perform the necessary configuration.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
S3FWRN5 depends on a clock input ("XI" pin) to function properly.
Depending on the hardware configuration this could be an always-on
oscillator or some external clock that must be explicitly enabled.
So far we assumed that the clock is always-on.
Make the driver request an (optional) clock from the device tree
and make sure the clock is running before starting S3FWRN5.
Note: S3FWRN5 asserts "GPIO2" whenever it needs the clock input to
function correctly. On some hardware configurations, GPIO2 is
connected directly to an input pin of the external clock provider
(e.g. the main PMIC of the SoC). In that case, it can automatically
AND the clock enable bit and clock request from S3FWRN5 so that
the clock is actually only enabled when needed.
It is also conceivable that on some other hardware configuration
S3FWRN5's GPIO2 might be connected as a regular GPIO input
of the SoC. In that case, follow-up patches could extend the
driver to request the GPIO, set up an interrupt and only enable
the clock when requested by S3FWRN5.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
On some systems, S3FWRN5 depends on having an external clock enabled
to function correctly. Allow declaring that clock in the device tree.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
loginuid/sessionid/secid have been read from 'current' instead of struct
netlink_skb_parms, the parameter 'skb' seems no longer needed.
Fixes: c53fa1ed92 ("netlink: kill loginuid/sessionid/sid members from struct netlink_skb_parms")
Signed-off-by: Zheng Yejian <zhengyejian1@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Guangbin Huang says:
====================
net: intel: some cleanups
This patchset adds some cleanups for intel e1000/e1000e ethernet driver.
====================
Reviewed-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There is a misspell word "retreived" in comment, so fix it to "retrieved".
Signed-off-by: Hao Chen <chenhao288@hisilicon.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There are double "slot" in comment, so remove the redundant one.
Signed-off-by: Hao Chen <chenhao288@hisilicon.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There are double "the" in comment, so remove the redundant one.
Signed-off-by: Hao Chen <chenhao288@hisilicon.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There are double "in" and "to" in comments, so remove the redundant one.
Signed-off-by: Hao Chen <chenhao288@hisilicon.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There are double "slot" in comment, so remove the redundant one.
Signed-off-by: Hao Chen <chenhao288@hisilicon.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Hui Tang says:
====================
net: ethernet: remove leading spaces before tabs
There are a few leading spaces before tabs and remove it by running the
following commard:
$ find . -name '*.c' | xargs sed -r -i 's/^[ ]+\t/\t/'
$ find . -name '*.h' | xargs sed -r -i 's/^[ ]+\t/\t/'
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
There are a few leading spaces before tabs and remove it by running the
following commard:
$ find . -name '*.c' | xargs sed -r -i 's/^[ ]+\t/\t/'
$ find . -name '*.h' | xargs sed -r -i 's/^[ ]+\t/\t/'
Cc: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There are a few leading spaces before tabs and remove it by running the
following commard:
$ find . -name '*.c' | xargs sed -r -i 's/^[ ]+\t/\t/'
$ find . -name '*.h' | xargs sed -r -i 's/^[ ]+\t/\t/'
Cc: Armin Wolf <W_Armin@gmx.de>
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There are a few leading spaces before tabs and remove it by running the
following commard:
$ find . -name '*.c' | xargs sed -r -i 's/^[ ]+\t/\t/'
$ find . -name '*.h' | xargs sed -r -i 's/^[ ]+\t/\t/'
Cc: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There are a few leading spaces before tabs and remove it by running the
following commard:
$ find . -name '*.c' | xargs sed -r -i 's/^[ ]+\t/\t/'
$ find . -name '*.h' | xargs sed -r -i 's/^[ ]+\t/\t/'
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There are a few leading spaces before tabs and remove it by running the
following commard:
$ find . -name '*.c' | xargs sed -r -i 's/^[ ]+\t/\t/'
$ find . -name '*.h' | xargs sed -r -i 's/^[ ]+\t/\t/'
Cc: Vaibhav Gupta <vaibhavgupta40@gmail.com>
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There are a few leading spaces before tabs and remove it by running the
following commard:
$ find . -name '*.c' | xargs sed -r -i 's/^[ ]+\t/\t/'
$ find . -name '*.h' | xargs sed -r -i 's/^[ ]+\t/\t/'
Cc: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There are a few leading spaces before tabs and remove it by running the
following commard:
$ find . -name '*.c' | xargs sed -r -i 's/^[ ]+\t/\t/'
$ find . -name '*.h' | xargs sed -r -i 's/^[ ]+\t/\t/'
Cc: "Gustavo A. R. Silva" <gustavoars@kernel.org>
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There are a few leading spaces before tabs and remove it by running the
following commard:
$ find . -name '*.c' | xargs sed -r -i 's/^[ ]+\t/\t/'
$ find . -name '*.h' | xargs sed -r -i 's/^[ ]+\t/\t/'
Cc: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There are a few leading spaces before tabs and remove it by running the
following commard:
$ find . -name '*.c' | xargs sed -r -i 's/^[ ]+\t/\t/'
$ find . -name '*.h' | xargs sed -r -i 's/^[ ]+\t/\t/'
Cc: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There are a few leading spaces before tabs and remove it by running the
following commard:
$ find . -name '*.c' | xargs sed -r -i 's/^[ ]+\t/\t/'
$ find . -name '*.h' | xargs sed -r -i 's/^[ ]+\t/\t/'
Cc: Zheng Yongjun <zhengyongjun3@huawei.com>
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There are a few leading spaces before tabs and remove it by running the
following commard:
$ find . -name '*.c' | xargs sed -r -i 's/^[ ]+\t/\t/'
$ find . -name '*.h' | xargs sed -r -i 's/^[ ]+\t/\t/'
Cc: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There are a few leading spaces before tabs and remove it by running the
following commard:
$ find . -name '*.c' | xargs sed -r -i 's/^[ ]+\t/\t/'
$ find . -name '*.h' | xargs sed -r -i 's/^[ ]+\t/\t/'
Cc: Sukadev Bhattiprolu <sukadev@linux.ibm.com>
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Acked-by: Lijun Pan <lijunp213@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There are a few leading spaces before tabs and remove it by running the
following commard:
$ find . -name '*.c' | xargs sed -r -i 's/^[ ]+\t/\t/'
$ find . -name '*.h' | xargs sed -r -i 's/^[ ]+\t/\t/'
Cc: "Alexander A. Klimov" <grandmaster@al2klimov.de>
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There are a few leading spaces before tabs and remove it by running the
following commard:
$ find . -name '*.c' | xargs sed -r -i 's/^[ ]+\t/\t/'
$ find . -name '*.h' | xargs sed -r -i 's/^[ ]+\t/\t/'
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There are a few leading spaces before tabs and remove it by running the
following commard:
$ find . -name '*.c' | xargs sed -r -i 's/^[ ]+\t/\t/'
$ find . -name '*.h' | xargs sed -r -i 's/^[ ]+\t/\t/'
Cc: Rohit Maheshwari <rohitm@chelsio.com>
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There are a few leading spaces before tabs and remove it by running the
following commard:
$ find . -name '*.c' | xargs sed -r -i 's/^[ ]+\t/\t/'
$ find . -name '*.h' | xargs sed -r -i 's/^[ ]+\t/\t/'
Cc: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There are a few leading spaces before tabs and remove it by running the
following commard:
$ find . -name '*.c' | xargs sed -r -i 's/^[ ]+\t/\t/'
$ find . -name '*.h' | xargs sed -r -i 's/^[ ]+\t/\t/'
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There are a few leading spaces before tabs and remove it by running the
following commard:
$ find . -name '*.c' | xargs sed -r -i 's/^[ ]+\t/\t/'
$ find . -name '*.h' | xargs sed -r -i 's/^[ ]+\t/\t/'
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There are a few leading spaces before tabs and remove it by running the
following commard:
$ find . -name '*.c' | xargs sed -r -i 's/^[ ]+\t/\t/'
$ find . -name '*.h' | xargs sed -r -i 's/^[ ]+\t/\t/'
Cc: Jes Sorensen <jes@trained-monkey.org>
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There are a few leading space before tabs and remove it by running the
following commard:
$ find . -name '*.c' | xargs sed -r -i 's/^[ ]+\t/\t/'
$ find . -name '*.h' | xargs sed -r -i 's/^[ ]+\t/\t/'
Cc: Steffen Klassert <klassert@kernel.org>
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use DEVICE_ATTR_RO helper instead of plain DEVICE_ATTR,
which makes the code a bit shorter and easier to read.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use kobj_to_dev() instead of container_of()
Generated by: scripts/coccinelle/api/kobj_to_dev.cocci
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Lijun Pan <lijunp213@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Similar to the way in which of_mdiobus_register() has a fallback to the
non-DT based mdiobus_register() when CONFIG_OF is not set, we can create
a shim for the device-managed devm_of_mdiobus_register() which calls
devm_mdiobus_register() and discards the struct device_node *.
In particular, this solves a build issue with the qca8k DSA driver which
uses devm_of_mdiobus_register and can be compiled without CONFIG_OF.
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The list_head dcb_app_list is initialized statically.
It is unnecessary to initialize by INIT_LIST_HEAD().
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Using list_del_init() instead of list_del() + INIT_LIST_HEAD()
to simpify the code.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Guangbin Huang says:
====================
net: wan: clean up some code style issues
This patchset clean up some code style issues.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix the checkpatch error: "foo* bar" should be "foo *bar".
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Space prohibited before that close parenthesis ')',
so removes the redundant space.
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Braces {} are not necessary for single statement blocks,
this patch removes redundant braces {}.
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add space required before the open parenthesis '(',
and add spaces required around that '<', '>' and '!='.
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch removes some redundant blank lines.
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add the missing unlock before return from function qca8k_vlan_add()
and qca8k_vlan_del() in the error handling case.
Fixes: 028f5f8ef4 ("net: dsa: qca8k: handle error with qca8k_read operation")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since cipso_v4_cache_invalidate() has no return value, so drop
related descriptions in its comments.
Fixes: 446fda4f26 ("[NetLabel]: CIPSOv4 engine")
Signed-off-by: Zheng Yejian <zhengyejian1@huawei.com>
Acked-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel says:
====================
Add support for custom multipath hash
This patchset adds support for custom multipath hash policy for both
IPv4 and IPv6 traffic. The new policy allows user space to control the
outer and inner packet fields used for the hash computation.
Motivation
==========
Linux currently supports different multipath hash policies for IPv4 and
IPv6 traffic:
* Layer 3
* Layer 4
* Layer 3 or inner layer 3, if present
These policies hash on a fixed set of fields, which is inflexible and
against operators' requirements to control the hash input: "The ability
to control the inputs to the hash function should be a consideration in
any load-balancing RFP" [1].
An example of this inflexibility can be seen by the fact that none of
the current policies allows operators to use the standard 5-tuple and
the flow label for multipath hash computation. Such a policy is useful
in the following real-world example of a data center with the following
types of traffic:
* Anycast IPv6 TCP traffic towards layer 4 load balancers. Flow label is
constant (zero) to avoid breaking established connections
* Non-encapsulated IPv6 traffic. Flow label is used to re-route flows
around problematic (congested / failed) paths [2]
* IPv6 encapsulated traffic (IPv4-in-IPv6 or IPv6-in-IPv6). Outer flow
label is generated from encapsulated packet
* UDP encapsulated traffic. Outer source port is generated from
encapsulated packet
In the above example, using the inner flow information for hash
computation in addition to the outer flow information is useful during
failures of the BPF agent that selectively generates the flow label
based on the traffic type. In such cases, the self-healing properties of
the flow label are lost, but encapsulated flows are still load balanced.
Control over the inner fields is even more critical when encapsulation
is performed by hardware routers. For example, the Spectrum ASIC can
only encode 8 bits of entropy in the outer flow label / outer UDP source
port when performing IP / UDP encapsulation. In the case of IPv4 GRE
encapsulation there is no outer field to encode the inner hash in.
User interface
==============
In accordance with existing multipath hash configuration, the new custom
policy is added as a new option (3) to the
net.ipv{4,6}.fib_multipath_hash_policy sysctls. When the new policy is
used, the packet fields used for hash computation are determined by the
net.ipv{4,6}.fib_multipath_hash_fields sysctls. These sysctls accept a
bitmask according to the following table (from ip-sysctl.rst):
====== ============================
0x0001 Source IP address
0x0002 Destination IP address
0x0004 IP protocol
0x0008 Flow Label
0x0010 Source port
0x0020 Destination port
0x0040 Inner source IP address
0x0080 Inner destination IP address
0x0100 Inner IP protocol
0x0200 Inner Flow Label
0x0400 Inner source port
0x0800 Inner destination port
====== ============================
For example, to allow IPv6 traffic to be hashed based on standard
5-tuple and flow label:
# sysctl -wq net.ipv6.fib_multipath_hash_fields=0x0037
# sysctl -wq net.ipv6.fib_multipath_hash_policy=3
Implementation
==============
As with existing policies, the new policy relies on the flow dissector
to extract the packet fields for the hash computation. However, unlike
existing policies that either use the outer or inner flow, the new
policy might require both flows to be dissected.
To avoid unnecessary invocations of the flow dissector, the data path
skips dissection of the outer or inner flows if none of the outer or
inner fields are required.
In addition, inner flow dissection is not performed when no
encapsulation was encountered (i.e., 'FLOW_DIS_ENCAPSULATION' not set by
flow dissector) during dissection of the outer flow.
Testing
=======
Three new selftests are added with three different topologies that allow
testing of following traffic combinations:
* Non-encapsulated IPv4 / IPv6 traffic
* IPv4 / IPv6 overlay over IPv4 underlay
* IPv4 / IPv6 overlay over IPv6 underlay
All three tests follow the same pattern. Each time a different packet
field is used for hash computation. When the field changes in the packet
stream, traffic is expected to be balanced across the two paths. When
the field does not change, traffic is expected to be unbalanced across
the two paths.
Patchset overview
=================
Patches #1-#3 add custom multipath hash support for IPv4 traffic
Patches #4-#7 do the same for IPv6
Patches #8-#10 add selftests
Future work
===========
mlxsw support can be found here [3].
Changes since RFC v2 [4]:
* Patch #2: Document that 0x0008 is used for Flow Label
* Patch #2: Do not allow the bitmask to be zero
* Patch #6: Do not allow the bitmask to be zero
Changes since RFC v1 [5]:
* Use a bitmask instead of a bitmap
[1] https://blog.apnic.net/2018/01/11/ipv6-flow-label-misuse-hashing/
[2] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=3acf3ec3f4b0fd4263989f2e4227bbd1c42b5fe1
[3] https://github.com/idosch/linux/tree/submit/custom_hash_mlxsw_v2
[4] https://lore.kernel.org/netdev/20210509151615.200608-1-idosch@idosch.org/
[5] https://lore.kernel.org/netdev/20210502162257.3472453-1-idosch@idosch.org/
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Test that when the hash policy is set to custom, traffic is distributed
only according to the inner fields set in the fib_multipath_hash_fields
sysctl.
Each time set a different field and make sure traffic is only
distributed when the field is changed in the packet stream.
The test only verifies the behavior of IPv4/IPv6 overlays on top of an
IPv6 underlay network. The previous patch verified the same with an IPv4
underlay network.
Example output:
# ./ip6gre_custom_multipath_hash.sh
TEST: ping [ OK ]
TEST: ping6 [ OK ]
INFO: Running IPv4 overlay custom multipath hash tests
TEST: Multipath hash field: Inner source IP (balanced) [ OK ]
INFO: Packets sent on path1 / path2: 6602 / 6002
TEST: Multipath hash field: Inner source IP (unbalanced) [ OK ]
INFO: Packets sent on path1 / path2: 1 / 12601
TEST: Multipath hash field: Inner destination IP (balanced) [ OK ]
INFO: Packets sent on path1 / path2: 6802 / 5801
TEST: Multipath hash field: Inner destination IP (unbalanced) [ OK ]
INFO: Packets sent on path1 / path2: 12602 / 3
TEST: Multipath hash field: Inner source port (balanced) [ OK ]
INFO: Packets sent on path1 / path2: 16431 / 16344
TEST: Multipath hash field: Inner source port (unbalanced) [ OK ]
INFO: Packets sent on path1 / path2: 0 / 32773
TEST: Multipath hash field: Inner destination port (balanced) [ OK ]
INFO: Packets sent on path1 / path2: 16431 / 16344
TEST: Multipath hash field: Inner destination port (unbalanced) [ OK ]
INFO: Packets sent on path1 / path2: 2 / 32772
INFO: Running IPv6 overlay custom multipath hash tests
TEST: Multipath hash field: Inner source IP (balanced) [ OK ]
INFO: Packets sent on path1 / path2: 6704 / 5902
TEST: Multipath hash field: Inner source IP (unbalanced) [ OK ]
INFO: Packets sent on path1 / path2: 1 / 12600
TEST: Multipath hash field: Inner destination IP (balanced) [ OK ]
INFO: Packets sent on path1 / path2: 5751 / 6852
TEST: Multipath hash field: Inner destination IP (unbalanced) [ OK ]
INFO: Packets sent on path1 / path2: 12602 / 0
TEST: Multipath hash field: Inner flowlabel (balanced) [ OK ]
INFO: Packets sent on path1 / path2: 8272 / 8181
TEST: Multipath hash field: Inner flowlabel (unbalanced) [ OK ]
INFO: Packets sent on path1 / path2: 3 / 12602
TEST: Multipath hash field: Inner source port (balanced) [ OK ]
INFO: Packets sent on path1 / path2: 16424 / 16351
TEST: Multipath hash field: Inner source port (unbalanced) [ OK ]
INFO: Packets sent on path1 / path2: 3 / 32774
TEST: Multipath hash field: Inner destination port (balanced) [ OK ]
INFO: Packets sent on path1 / path2: 16425 / 16350
TEST: Multipath hash field: Inner destination port (unbalanced) [ OK ]
INFO: Packets sent on path1 / path2: 2 / 32773
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Test that when the hash policy is set to custom, traffic is distributed
only according to the inner fields set in the fib_multipath_hash_fields
sysctl.
Each time set a different field and make sure traffic is only
distributed when the field is changed in the packet stream.
The test only verifies the behavior of IPv4/IPv6 overlays on top of an
IPv4 underlay network. A subsequent patch will do the same with an IPv6
underlay network.
Example output:
# ./gre_custom_multipath_hash.sh
TEST: ping [ OK ]
TEST: ping6 [ OK ]
INFO: Running IPv4 overlay custom multipath hash tests
TEST: Multipath hash field: Inner source IP (balanced) [ OK ]
INFO: Packets sent on path1 / path2: 6601 / 6001
TEST: Multipath hash field: Inner source IP (unbalanced) [ OK ]
INFO: Packets sent on path1 / path2: 0 / 12600
TEST: Multipath hash field: Inner destination IP (balanced) [ OK ]
INFO: Packets sent on path1 / path2: 6802 / 5802
TEST: Multipath hash field: Inner destination IP (unbalanced) [ OK ]
INFO: Packets sent on path1 / path2: 12601 / 1
TEST: Multipath hash field: Inner source port (balanced) [ OK ]
INFO: Packets sent on path1 / path2: 16430 / 16344
TEST: Multipath hash field: Inner source port (unbalanced) [ OK ]
INFO: Packets sent on path1 / path2: 0 / 32772
TEST: Multipath hash field: Inner destination port (balanced) [ OK ]
INFO: Packets sent on path1 / path2: 16430 / 16343
TEST: Multipath hash field: Inner destination port (unbalanced) [ OK ]
INFO: Packets sent on path1 / path2: 0 / 32772
INFO: Running IPv6 overlay custom multipath hash tests
TEST: Multipath hash field: Inner source IP (balanced) [ OK ]
INFO: Packets sent on path1 / path2: 6702 / 5900
TEST: Multipath hash field: Inner source IP (unbalanced) [ OK ]
INFO: Packets sent on path1 / path2: 0 / 12601
TEST: Multipath hash field: Inner destination IP (balanced) [ OK ]
INFO: Packets sent on path1 / path2: 5751 / 6851
TEST: Multipath hash field: Inner destination IP (unbalanced) [ OK ]
INFO: Packets sent on path1 / path2: 12602 / 1
TEST: Multipath hash field: Inner flowlabel (balanced) [ OK ]
INFO: Packets sent on path1 / path2: 8364 / 8065
TEST: Multipath hash field: Inner flowlabel (unbalanced) [ OK ]
INFO: Packets sent on path1 / path2: 12601 / 0
TEST: Multipath hash field: Inner source port (balanced) [ OK ]
INFO: Packets sent on path1 / path2: 16425 / 16349
TEST: Multipath hash field: Inner source port (unbalanced) [ OK ]
INFO: Packets sent on path1 / path2: 1 / 32770
TEST: Multipath hash field: Inner destination port (balanced) [ OK ]
INFO: Packets sent on path1 / path2: 16425 / 16349
TEST: Multipath hash field: Inner destination port (unbalanced) [ OK ]
INFO: Packets sent on path1 / path2: 2 / 32770
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Test that when the hash policy is set to custom, traffic is distributed
only according to the outer fields set in the fib_multipath_hash_fields
sysctl.
Each time set a different field and make sure traffic is only
distributed when the field is changed in the packet stream.
The test only verifies the behavior with non-encapsulated IPv4 and IPv6
packets. Subsequent patches will add tests for IPv4/IPv6 overlays on top
of IPv4/IPv6 underlay networks.
Example output:
# ./custom_multipath_hash.sh
TEST: ping [ OK ]
TEST: ping6 [ OK ]
INFO: Running IPv4 custom multipath hash tests
TEST: Multipath hash field: Source IP (balanced) [ OK ]
INFO: Packets sent on path1 / path2: 6353 / 6254
TEST: Multipath hash field: Source IP (unbalanced) [ OK ]
INFO: Packets sent on path1 / path2: 0 / 12600
TEST: Multipath hash field: Destination IP (balanced) [ OK ]
INFO: Packets sent on path1 / path2: 6102 / 6502
TEST: Multipath hash field: Destination IP (unbalanced) [ OK ]
INFO: Packets sent on path1 / path2: 1 / 12601
TEST: Multipath hash field: Source port (balanced) [ OK ]
INFO: Packets sent on path1 / path2: 16428 / 16345
TEST: Multipath hash field: Source port (unbalanced) [ OK ]
INFO: Packets sent on path1 / path2: 32770 / 2
TEST: Multipath hash field: Destination port (balanced) [ OK ]
INFO: Packets sent on path1 / path2: 16428 / 16345
TEST: Multipath hash field: Destination port (unbalanced) [ OK ]
INFO: Packets sent on path1 / path2: 32770 / 2
INFO: Running IPv6 custom multipath hash tests
TEST: Multipath hash field: Source IP (balanced) [ OK ]
INFO: Packets sent on path1 / path2: 6704 / 5903
TEST: Multipath hash field: Source IP (unbalanced) [ OK ]
INFO: Packets sent on path1 / path2: 12600 / 0
TEST: Multipath hash field: Destination IP (balanced) [ OK ]
INFO: Packets sent on path1 / path2: 5551 / 7052
TEST: Multipath hash field: Destination IP (unbalanced) [ OK ]
INFO: Packets sent on path1 / path2: 12603 / 0
TEST: Multipath hash field: Flowlabel (balanced) [ OK ]
INFO: Packets sent on path1 / path2: 8378 / 8080
TEST: Multipath hash field: Flowlabel (unbalanced) [ OK ]
INFO: Packets sent on path1 / path2: 2 / 12603
TEST: Multipath hash field: Source port (balanced) [ OK ]
INFO: Packets sent on path1 / path2: 16385 / 16388
TEST: Multipath hash field: Source port (unbalanced) [ OK ]
INFO: Packets sent on path1 / path2: 0 / 32774
TEST: Multipath hash field: Destination port (balanced) [ OK ]
INFO: Packets sent on path1 / path2: 16386 / 16390
TEST: Multipath hash field: Destination port (unbalanced) [ OK ]
INFO: Packets sent on path1 / path2: 32771 / 2
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a new multipath hash policy where the packet fields used for hash
calculation are determined by user space via the
fib_multipath_hash_fields sysctl that was introduced in the previous
patch.
The current set of available packet fields includes both outer and inner
fields, which requires two invocations of the flow dissector. Avoid
unnecessary dissection of the outer or inner flows by skipping
dissection if none of the outer or inner fields are required.
In accordance with the existing policies, when an skb is not available,
packet fields are extracted from the provided flow key. In which case,
only outer fields are considered.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
A subsequent patch will add a new multipath hash policy where the packet
fields used for multipath hash calculation are determined by user space.
This patch adds a sysctl that allows user space to set these fields.
The packet fields are represented using a bitmask and are common between
IPv4 and IPv6 to allow user space to use the same numbering across both
protocols. For example, to hash based on standard 5-tuple:
# sysctl -w net.ipv6.fib_multipath_hash_fields=0x0037
net.ipv6.fib_multipath_hash_fields = 0x0037
To avoid introducing holes in 'struct netns_sysctl_ipv6', move the
'bindv6only' field after the multipath hash fields.
The kernel rejects unknown fields, for example:
# sysctl -w net.ipv6.fib_multipath_hash_fields=0x1000
sysctl: setting key "net.ipv6.fib_multipath_hash_fields": Invalid argument
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
