Commit Graph

440812 Commits

Author SHA1 Message Date
Lars Ellenberg
e829987433 drbd: don't let application IO pre-empt resync too often
Before, application IO could pre-empt resync activity
for up to hardcoded 20 seconds per resync request.
A very busy server could throttle the effective resync bandwidth
down to one request per 20 seconds.

Now, we only let application IO pre-empt resync traffic
while the current resync rate estimate is above c-min-rate.

If you disable the c-min-rate throttle feature (set c-min-rate = 0),
application IO will no longer pre-empt resync traffic at all.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2014-04-30 13:46:54 -06:00
Lars Ellenberg
0e49d7b014 drbd: fix potential distributed deadlock during verify or resync
If max-buffers and socket buffer sizes are "too small" for the chosen
resync rate, this could lead potentially lead to a distributed deadlock,
which may or may not resolve itself via the "ko-count" and request
timeout mechanism, or could be resolved by forced disconnect.

One option to deal with this is proper configuration:
use larger max-buffer and socket buffers settings,
or reduce the resync rate.

But even with bad configuration we should not deadlock,
but "gracefully" recover.

The issue is avoided by using only up to max-buffers/2 for resync
requests, and by using max-buffers not as a hard limit for data buffer
allocations, but as a throttle threshold only.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2014-04-30 13:46:54 -06:00
Lars Ellenberg
6377b92350 drbd: resync: fix too large bursts for very slow rates
While merging adjacent dirty blocks into resync requests,
the resync rate throttle was disregarded.
For very low resync rates, the effective rate may have exceeded
the intended rate by a larger margin.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2014-04-30 13:46:54 -06:00
Lars Ellenberg
9ae472605a drbd: fix stalled resync detection in /proc/drbd
If we don't make resync or verify progress for "too long",
we want to flag it as "stalled".

Since 2010, "use rolling marks for resync speed calculation"
this "too long" was wrong by a factor of HZ.
With HZ 250, it would have been flagged as stalled
after 100 minutes.

Hardcode 3 minutes instead.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2014-04-30 13:46:54 -06:00
Philipp Reisner
cdc6af8df4 drbd: Allow online layout change of AL while peer is not connected
If a user forces the operation he takes the blame in case
the peer does not have enough space. No reason to dey this...

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2014-04-30 13:46:54 -06:00
Philipp Reisner
d40e567149 drbd: Remove drbd_wrappers.h
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2014-04-30 13:46:54 -06:00
Philipp Reisner
d7fe69c6a1 drbd: Leave IO suspended if the fence handler find the peer primary
Actually we are clearing the susp_fen flag if we are not going
to call a fencing handler.

For setting the susp_fen flag needs to be edge-triggerd, and not
level triggered.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2014-04-30 13:46:54 -06:00
Philipp Reisner
31007745a5 drbd: Break a deadlock while concurrent fencing and establishing a connection
When we need to outdate the peer while being promoted to primary,
and the connection gets established at the same time, we deadlock
in drbd_try_outdate_peer() when trying to clear the susp_fen
bit.

Fix this by setting the STATE_SENT bit while holding the mutex.

Using drbd_change_state(.. , CS_HARD, ..) which does not block
until STATE_SENT is cleared, is only for clearness. It does
not contribute anything to the fix.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2014-04-30 13:46:53 -06:00
Asai Thambi S P
d1e714db81 mtip32xx: Fix ERO and NoSnoop values in PCIe upstream on AMD systems
A hardware quirk in P320h/P420m interfere with PCIe transactions on some
AMD chipsets, making P320h/P420m unusable. This workaround is to disable
ERO and NoSnoop bits in the parent and root complex for normal
functioning of these devices

NOTE: This workaround is specific to AMD chipset with a PCIe upstream
device with device id 0x5aXX

Signed-off-by: Asai Thambi S P <asamymuthupa@micron.com>
Signed-off-by: Sam Bradshaw <sbradshaw@micron.com>
Cc: stable@kernel.org
Signed-off-by: Jens Axboe <axboe@fb.com>
2014-04-22 19:48:52 -06:00
Asai Thambi S P
af5ded8ccf mtip32xx: Remove dfs_parent after pci unregister
In module exit, dfs_parent and it's subtree were removed before
unregistering with pci. When debugfs entry for each device is attempted
to remove in pci_remove() context, they don't exist, as dfs_parent and
its children were already ripped apart.

Modified to first unregister with pci and then remove dfs_parent.

Signed-off-by: Asai Thambi S P <asamymuthupa@micron.com>
Cc: stable@kernel.org
Signed-off-by: Jens Axboe <axboe@fb.com>
2014-04-22 19:48:51 -06:00
Asai Thambi S P
670a641420 mtip32xx: Increase timeout for STANDBY IMMEDIATE command
Increased timeout for STANDBY IMMEDIATE command to 2 minutes.

Signed-off-by: Selvan Mani <smani@micron.com>
Signed-off-by: Asai Thambi S P <asamymuthupa@micron.com>
Cc: stable@kernel.org
Signed-off-by: Jens Axboe <axboe@fb.com>
2014-04-22 19:46:21 -06:00
Alexander Gordeev
24cddb83b4 cciss: Use pci_enable_msix_exact() instead of pci_enable_msix()
As result of deprecation of MSI-X/MSI enablement functions
pci_enable_msix() and pci_enable_msi_block() all drivers
using these two interfaces need to be updated to use the
new pci_enable_msi_range()  or pci_enable_msi_exact()
and pci_enable_msix_range() or pci_enable_msix_exact()
interfaces.

Signed-off-by: Alexander Gordeev <agordeev@redhat.com>
Cc: Mike Miller <mike.miller@hp.com>
Cc: iss_storagedev@hp.com
Cc: Jens Axboe <axboe@kernel.dk>
Cc: linux-pci@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@fb.com>
2014-04-21 19:02:08 -06:00
Alexander Gordeev
01aad3f0de skd: Use pci_enable_msix_exact() instead of pci_enable_msix_range()
Function pci_enable_msix_exact() is a variation of
pci_enable_msix_range() that allows a device driver
to request a particular number of MSI-X interrupts,
rather than any number within a specified range.

Signed-off-by: Alexander Gordeev <agordeev@redhat.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: linux-pci@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@fb.com>
2014-04-21 19:02:05 -06:00
Jens Axboe
49fd524f95 bsg: update check for rq based driver for blk-mq
bsg currently checks ->request_fn to check whether a queue can
handle struct request. But with blk-mq, we don't have a request_fn
yet are request based. Add a queue_is_rq_based() helper and use
that in bsg, I'm guessing this is not the last place we need to
update for this. Besides, it better explains what is being
checked.

Signed-off-by: Jens Axboe <axboe@fb.com>
2014-04-16 14:15:46 -06:00
Jens Axboe
fb1be43301 jsflash: missed conversion from rq->buffer to bio_data(rq->bio)
Signed-off-by: Jens Axboe <axboe@fb.com>
2014-04-16 14:15:25 -06:00
Jens Axboe
f793aa5378 block: relax when to modify the timeout timer
Since we are now, by default, applying timer slack to expiry times,
the logic for when to modify a timer in the block code is suboptimal.
The block layer keeps a forward rolling timer per queue for all
requests, and modifies this timer if a request has a shorter timeout
than what the current expiry time is. However, this breaks down
when our rounded timer values get applied slack. Then each new
request ends up modifying the timer, since we're still a little
in front of the timer + slack.

Fix this by allowing a tolerance of HZ / 2, the timeout handling
doesn't need to be very precise. This drastically cuts down
the number of timer modifications we have to make.

Signed-off-by: Jens Axboe <axboe@fb.com>
2014-04-16 14:15:25 -06:00
Christoph Hellwig
12120077b2 block: export blk_finish_request
This allows to mirror the blk-mq code flow for more a more readable I/O
completion handler in SCSI.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2014-04-16 14:15:25 -06:00
Christoph Hellwig
f88a164b72 blk-mq: rename mq_flush_work struct request member
We will use this work_struct to requeue scsi commands from the
completion handler as well, so give it a more generic name.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2014-04-16 14:15:25 -06:00
Christoph Hellwig
ed0791b2f8 blk-mq: add blk_mq_requeue_request
This allows to requeue a request that has been accepted by ->queue_rq
earlier.  This is needed by the SCSI layer in various error conditions.

The existing internal blk_mq_requeue_request is renamed to
__blk_mq_requeue_request as it is a lower level building block for this
funtionality.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2014-04-16 14:15:25 -06:00
Christoph Hellwig
2f26855656 blk-mq: add blk_mq_start_hw_queues
Add a helper to unconditionally kick contexts of a queue.  This will
be needed by the SCSI layer to provide fair queueing between multiple
devices on a single host.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2014-04-16 14:15:25 -06:00
Christoph Hellwig
70f4db639c blk-mq: add blk_mq_delay_queue
Add a blk-mq equivalent to blk_delay_queue so that the scsi layer can ask
to be kicked again after a delay.

Signed-off-by: Christoph Hellwig <hch@lst.de>

Modified by me to kill the unnecessary preempt disable/enable
in the delayed workqueue handler.

Signed-off-by: Jens Axboe <axboe@fb.com>
2014-04-16 14:15:25 -06:00
Christoph Hellwig
1b4a325858 blk-mq: add async parameter to blk_mq_start_stopped_hw_queues
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2014-04-16 14:15:25 -06:00
Christoph Hellwig
91b63639c7 blk-mq: bidi support
Add two unlinkely branches to make sure the resid is initialized correctly
for bidi request pairs, and the second request gets properly freed.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2014-04-16 14:15:25 -06:00
Christoph Hellwig
63151a449e blk-mq: allow drivers to hook into I/O completion
Split out the bottom half of blk_mq_end_io so that drivers can perform
work when they know a request has been completed, but before it has been
freed.  This also obsoletes blk_mq_end_io_partial as drivers can now
pass any value to blk_update_request directly.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2014-04-16 14:15:25 -06:00
Jens Axboe
6700a678c0 blk-mq: kill preempt disable/enable in blk_mq_work_fn()
blk_mq_work_fn() is always invoked off the bounded workqueues,
so it can happily preempt among the queues in that set without
causing any issues for blk-mq.

Signed-off-by: Jens Axboe <axboe@fb.com>
2014-04-16 14:15:24 -06:00
Jens Axboe
fd1270d5df blk-mq: don't use preempt_count() to check for right CPU
UP or CONFIG_PREEMPT_NONE will return 0, and what we really
want to check is whether or not we are on the right CPU.
So don't make PREEMPT part of this, just test the CPU in
the mask directly.

Signed-off-by: Jens Axboe <axboe@fb.com>
2014-04-16 14:15:24 -06:00
Jens Axboe
8e1a6287d9 gdrom: missed conversion from req->buffer
The friendly Intel kbuild test robot reported:

drivers/cdrom/gdrom.c: In function 'gdrom_readdisk_dma':
drivers/cdrom/gdrom.c:605:3: error: 'struct request' has no member named 'buffer'

Convert that from req->buffer to bio_data(rq->bio). Apparently
my grep missed this one, and I don't build for Sega Dreamcast
enough.

Signed-off-by: Jens Axboe <axboe@fb.com>
2014-04-16 14:15:24 -06:00
Christoph Hellwig
fb3ccb5da7 block: all blk-mq requests are tagged
Instead of setting the REQ_QUEUED flag on each of them just take it into
account in the only macro checking it.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2014-04-15 14:18:02 -06:00
Christoph Hellwig
24d2f90309 blk-mq: split out tag initialization, support shared tags
Add a new blk_mq_tag_set structure that gets set up before we initialize
the queue.  A single blk_mq_tag_set structure can be shared by multiple
queues.

Signed-off-by: Christoph Hellwig <hch@lst.de>

Modular export of blk_mq_{alloc,free}_tagset added by me.

Signed-off-by: Jens Axboe <axboe@fb.com>
2014-04-15 14:18:02 -06:00
Christoph Hellwig
ed44832dea blk-mq: initialize request on allocation
If we want to share tag and request allocation between queues we cannot
initialize the request at init/free time, but need to initialize it
at allocation time as it might get used for different queues over its
lifetime.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2014-04-15 14:03:03 -06:00
Christoph Hellwig
e9b267d91f blk-mq: add ->init_request and ->exit_request methods
The current blk_mq_init_commands/blk_mq_free_commands interface has a
two problems:

 1) Because only the constructor is passed to blk_mq_init_commands there
    is no easy way to clean up when a comman initialization failed.  The
    current code simply leaks the allocations done in the constructor.

 2) There is no good place to call blk_mq_free_commands: before
    blk_cleanup_queue there is no guarantee that all outstanding
    commands have completed, so we can't free them yet.  After
    blk_cleanup_queue the queue has usually been freed.  This can be
    worked around by grabbing an unconditional reference before calling
    blk_cleanup_queue and dropping it after blk_mq_free_commands is
    done, although that's not exatly pretty and driver writers are
    guaranteed to get it wrong sooner or later.

Both issues are easily fixed by making the request constructor and
destructor normal blk_mq_ops methods.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2014-04-15 14:03:03 -06:00
Christoph Hellwig
8727af4b9d blk-mq: make ->flush_rq fully transparent to drivers
Drivers shouldn't have to care about the block layer setting aside a
request to implement the flush state machine.  We already override the
mq context and tag to make it more transparent, but so far haven't deal
with the driver private data in the request.  Make sure to override this
as well, and while we're at it add a proper helper sitting in blk-mq.c
that implements the full impersonation.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2014-04-15 14:03:02 -06:00
Christoph Hellwig
9d74e25737 blk-mq: do not initialize req->special
Drivers can reach their private data easily using the blk_mq_rq_to_pdu
helper and don't need req->special.  By not initializing it code can
be simplified nicely, and we also shave off a few more instructions from
the I/O path.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2014-04-15 14:03:02 -06:00
Christoph Hellwig
742ee69b92 blk-mq: initialize resid_len
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2014-04-15 14:03:02 -06:00
Jens Axboe
b4f42e2831 block: remove struct request buffer member
This was used in the olden days, back when onions were proper
yellow. Basically it mapped to the current buffer to be
transferred. With highmem being added more than a decade ago,
most drivers map pages out of a bio, and rq->buffer isn't
pointing at anything valid.

Convert old style drivers to just use bio_data().

For the discard payload use case, just reference the page
in the bio.

Signed-off-by: Jens Axboe <axboe@fb.com>
2014-04-15 14:03:02 -06:00
Jens Axboe
f89e0dd9d1 Linux 3.15-rc1
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJTSv89AAoJEHm+PkMAQRiGd7AIAKL45dFRhX96W53uzGlpXtv7
 Ecs9CMY5mtsB/rqtV/NSQaUELlNb4Ilb4lITh7NaLWAZxDJ12GwVsIbFoaBj7Ypx
 tfBNNxffGGnTTn2C1PpPQmLytLBvqXIVHMaPpDvnHYJl6g9BihshLzyMrsrizqnA
 DPJ0xMdgGp6BLC4qm0ZH1mS2q+TyXLN2ZCjJ1lp6NNYwBnwOe/ABjnUa0Ztu7aii
 837N8h6nEuKHTr6DgrYHEgYVc3DPHPHaly/UJ8v4U30myzRv83YkD5DsBSUjSLj8
 CzxJEnECa1XljLJK7SjRHy5pSP9tcUlmjx3Fk7IpQixmT+A15cov6fQ967jNlDw=
 =Hxnc
 -----END PGP SIGNATURE-----

Merge tag 'v3.15-rc1' into for-3.16/core

We don't like this, but things have diverged with the blk-mq fixes
in 3.15-rc1. So merge it in.
2014-04-15 14:02:24 -06:00
Linus Torvalds
c9eaa447e7 Linux 3.15-rc1 2014-04-13 14:18:35 -07:00
Geert Uytterhoeven
f7c1d07420 mm: Initialize error in shmem_file_aio_read()
Some versions of gcc even warn about it:

  mm/shmem.c: In function ‘shmem_file_aio_read’:
  mm/shmem.c:1414: warning: ‘error’ may be used uninitialized in this function

If the loop is aborted during the first iteration by one of the two
first break statements, error will be uninitialized.

Introduced by commit 6e58e79db8 ("introduce copy_page_to_iter, kill
loop over iovec in generic_file_aio_read()").

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-13 14:10:26 -07:00
Geert Uytterhoeven
e686bd8dc5 cifs: Use min_t() when comparing "size_t" and "unsigned long"
On 32 bit, size_t is "unsigned int", not "unsigned long", causing the
following warning when comparing with PAGE_SIZE, which is always "unsigned
long":

  fs/cifs/file.c: In function ‘cifs_readdata_to_iov’:
  fs/cifs/file.c:2757: warning: comparison of distinct pointer types lacks a cast

Introduced by commit 7f25bba819 ("cifs_iovec_read: keep iov_iter
between the calls of cifs_readdata_to_iov()"), which changed the
signedness of "remaining" and the code from min_t() to min().

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-13 14:10:26 -07:00
Linus Torvalds
bf3a340738 Merge branch 'slab/next' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/linux
Pull slab changes from Pekka Enberg:
 "The biggest change is byte-sized freelist indices which reduces slab
  freelist memory usage:

    https://lkml.org/lkml/2013/12/2/64"

* 'slab/next' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/linux:
  mm: slab/slub: use page->list consistently instead of page->lru
  mm/slab.c: cleanup outdated comments and unify variables naming
  slab: fix wrongly used macro
  slub: fix high order page allocation problem with __GFP_NOFAIL
  slab: Make allocations with GFP_ZERO slightly more efficient
  slab: make more slab management structure off the slab
  slab: introduce byte sized index for the freelist of a slab
  slab: restrict the number of objects in a slab
  slab: introduce helper functions to get/set free object
  slab: factor out calculate nr objects in cache_estimate
2014-04-13 13:28:13 -07:00
Linus Torvalds
321d03c867 Merge branch 'misc' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild
Pull misc kbuild changes from Michal Marek:
 "Here is the non-critical part of kbuild:
   - One bogus coccinelle check removed, one check fixed not to suggest
     the obsolete PTR_RET macro
   - scripts/tags.sh does not index the generated *.mod.c files
   - new objdiff tool to list differences between two versions of an
     object file
   - A fix for scripts/bootgraph.pl"

* 'misc' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
  scripts/coccinelle: Use PTR_ERR_OR_ZERO
  scripts/bootgraph.pl: Add graphic header
  scripts: objdiff: detect object code changes between two commits
  Coccicheck: Remove memcpy to struct assignment test
  scripts/tags.sh: Ignore *.mod.c
2014-04-12 18:22:27 -07:00
Mikulas Patocka
fd1232b214 sym53c8xx_2: Set DID_REQUEUE return code when aborting squeue
This patch fixes I/O errors with the sym53c8xx_2 driver when the disk
returns QUEUE FULL status.

When the controller encounters an error (including QUEUE FULL or BUSY
status), it aborts all not yet submitted requests in the function
sym_dequeue_from_squeue.

This function aborts them with DID_SOFT_ERROR.

If the disk has full tag queue, the request that caused the overflow is
aborted with QUEUE FULL status (and the scsi midlayer properly retries
it until it is accepted by the disk), but the sym53c8xx_2 driver aborts
the following requests with DID_SOFT_ERROR --- for them, the midlayer
does just a few retries and then signals the error up to sd.

The result is that disk returning QUEUE FULL causes request failures.

The error was reproduced on 53c895 with COMPAQ BD03685A24 disk
(rebranded ST336607LC) with command queue 48 or 64 tags.  The disk has
64 tags, but under some access patterns it return QUEUE FULL when there
are less than 64 pending tags.  The SCSI specification allows returning
QUEUE FULL anytime and it is up to the host to retry.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: Matthew Wilcox <matthew@wil.cx>
Cc: James Bottomley <JBottomley@Parallels.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-12 18:02:16 -07:00
Paul Mackerras
18aa0da33e powerpc: Don't try to set LPCR unless we're in hypervisor mode
Commit 8f619b5429 ("powerpc/ppc64: Do not turn AIL (reloc-on
interrupts) too early") added code to set the AIL bit in the LPCR
without checking whether the kernel is running in hypervisor mode.  The
result is that when the kernel is running as a guest (i.e., under
PowerKVM or PowerVM), the processor takes a privileged instruction
interrupt at that point, causing a panic.  The visible result is that
the kernel hangs after printing "returning from prom_init".

This fixes it by checking for hypervisor mode being available before
setting LPCR.  If we are not in hypervisor mode, we enable relocation-on
interrupts later in pSeries_setup_arch using the H_SET_MODE hcall.

Signed-off-by: Paul Mackerras <paulus@samba.org>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-12 17:58:48 -07:00
Davidlohr Bueso
d7e8af1afe futex: update documentation for ordering guarantees
Commits 11d4616bd0 ("futex: revert back to the explicit waiter
counting code") and 69cd9eba38 ("futex: avoid race between requeue and
wake") changed some of the finer details of how we think about futexes.
One was a late fix and the other a consequence of overlooking the whole
requeuing logic.

The first change caused our documentation to be incorrect, and the
second made us aware that we need to explicitly add more details to it.

Signed-off-by: Davidlohr Bueso <davidlohr@hp.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-12 17:57:51 -07:00
Linus Torvalds
454fd351f2 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Pull yet more networking updates from David Miller:

 1) Various fixes to the new Redpine Signals wireless driver, from
    Fariya Fatima.

 2) L2TP PPP connect code takes PMTU from the wrong socket, fix from
    Dmitry Petukhov.

 3) UFO and TSO packets differ in whether they include the protocol
    header in gso_size, account for that in skb_gso_transport_seglen().
   From Florian Westphal.

 4) If VLAN untagging fails, we double free the SKB in the bridging
    output path.  From Toshiaki Makita.

 5) Several call sites of sk->sk_data_ready() were referencing an SKB
    just added to the socket receive queue in order to calculate the
    second argument via skb->len.  This is dangerous because the moment
    the skb is added to the receive queue it can be consumed in another
    context and freed up.

    It turns out also that none of the sk->sk_data_ready()
    implementations even care about this second argument.

    So just kill it off and thus fix all these use-after-free bugs as a
    side effect.

 6) Fix inverted test in tcp_v6_send_response(), from Lorenzo Colitti.

 7) pktgen needs to do locking properly for LLTX devices, from Daniel
    Borkmann.

 8) xen-netfront driver initializes TX array entries in RX loop :-) From
    Vincenzo Maffione.

 9) After refactoring, some tunnel drivers allow a tunnel to be
    configured on top itself.  Fix from Nicolas Dichtel.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (46 commits)
  vti: don't allow to add the same tunnel twice
  gre: don't allow to add the same tunnel twice
  drivers: net: xen-netfront: fix array initialization bug
  pktgen: be friendly to LLTX devices
  r8152: check RTL8152_UNPLUG
  net: sun4i-emac: add promiscuous support
  net/apne: replace IS_ERR and PTR_ERR with PTR_ERR_OR_ZERO
  net: ipv6: Fix oif in TCP SYN+ACK route lookup.
  drivers: net: cpsw: enable interrupts after napi enable and clearing previous interrupts
  drivers: net: cpsw: discard all packets received when interface is down
  net: Fix use after free by removing length arg from sk_data_ready callbacks.
  Drivers: net: hyperv: Address UDP checksum issues
  Drivers: net: hyperv: Negotiate suitable ndis version for offload support
  Drivers: net: hyperv: Allocate memory for all possible per-pecket information
  bridge: Fix double free and memory leak around br_allowed_ingress
  bonding: Remove debug_fs files when module init fails
  i40evf: program RSS LUT correctly
  i40evf: remove open-coded skb_cow_head
  ixgb: remove open-coded skb_cow_head
  igbvf: remove open-coded skb_cow_head
  ...
2014-04-12 17:31:22 -07:00
Linus Torvalds
fd18f00dd9 blackfin updates for Linux 3.15
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJTSI28AAoJEJommM3PjknH4aEP/iw75wO2c9L0tY4GxKiHBEwq
 koyXb9alWR1wlHRx6ja5v1V4I6zXk2Ft8MfxoGbze0XNY3Ih4ErUqZMFgt2oiJen
 lfilY2F0oNrcAxHn/Q5VQnKLa8P3qrPgzzIu9zkPMYmfyMHn2bGXesmQ/JITod8J
 ljcciWH4PvYU27aHZJRCUhcsRfBVa5XaWNd5sjRyBGmkuRrgbxy5spJ8ORukElrR
 yzRrd4qPSRNY7jHt39FYJDk3mAU5TZZZKGk++l0dpTUuwkS65TqsoqWtbb88MNR+
 JAaZ5AEAxC0NWDYDDOP/UPi89K56OphqwwgK9sgLXcVX1iGhl/VKT5isfli3pqA8
 aSNDOrYsdOx2a1te6H1sU6aoTq7X9Eb0NHlBYGkwIYnCF20m5rLy6TuFmupLPtD0
 sdYF3YIUWgqyomcBJWV0+kqr9jqB85w2QQvHBFHkirAoZ3tgtWiXF75bh6zOuquB
 ADQ0ZRYcDDIJ0IA3unKIi0JyEWKySYzuWQgc8rfMbKvYKQHHkiEBsALjvwusJ3Zj
 tEmctpVBb1mxyRi90m+IJjx63PyJpUYDRaV1f7/E4Q3kyNQ2k6sD22nT512Sl6lA
 y3OzfO72hr59DhuG8FcPrAb7nYr7BO8CWgotPfnzt+EaK/0mNa2AZPIkJ9vGXRSF
 26X31FJxjN/xbsELC+TP
 =xfcQ
 -----END PGP SIGNATURE-----

Merge tag 'blackfin-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/realmz6/blackfin-linux

Pull blackfin updates from Steven Miao:
 "Code cleanup, some previously ignored patches, and bug fixes"

* tag 'blackfin-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/realmz6/blackfin-linux:
  blackfin: cleanup board files
  bf609: clock: drop unused clock bit set/clear functions
  Blackfin: bf537: rename "CONFIG_ADT75"
  Blackfin: bf537: rename "CONFIG_AD7314"
  Blackfin: bf537: rename ad2s120x ->ad2s1200
  blackfin: bf537: fix typo "CONFIG_SND_SOC_ADV80X_MODULE"
  blackfin: dma: current count mmr is read only
  bfin_crc: Move architecture independant crc header file out of the blackfin folder.
  bf54x: drop unuesd HOST status,control,timeout registers bit define macros
  blackfin: portmux: cleanup head file
  Blackfin: remove "config IP_CHECKSUM_L1"
  blackfin: Remove GENERIC_GPIO config option again
  blackfin:Use generic /proc/interrupts implementation
  blackfin: bf60x: fix typo "CONFIG_PM_BFIN_WAKE_PA15_POL"
2014-04-12 17:26:45 -07:00
Linus Torvalds
de0c9cf96a Several remoteproc cleanup patches coming from Jingoo Han, Julia Lawall and Uwe Kleine-König.
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.14 (GNU/Linux)
 
 iQIcBAABAgAGBQJTR+rtAAoJELLolMlTRIoMIccQAMPvi0aYD/BvqGFm/7540Iqx
 A8RfG93V223V6qs79eqmSg+OjmowK/m9GNLblvNupzG1a5lOyPaMWyhCLP+3BbpT
 wHuFZJVb35jSn+pHoRDKPsu2a0hf1VTFpGToJKEsWKDW12zQfUlNrDpWxiEoqilO
 JBCyE/2/WwYvdceWhUnfbWJlABI6Y4t8yc99UlH77fjApu6B4jg6YVLEydgIKgoG
 rZJkae67WK6xHp4ORSB4VCwEs4sV3Ze7OED4a5VA/2Vr+IeGnzjmzADLJFiOjQOA
 4Wh/dI7wayDTJC7O2b8pOtmG+fIk0Cn3JEybMi3eDx/SenuCUs2gSQBaB0qh+pNw
 1Vc/2xjD/ro9HgLBpTk2+ioUZb6N5ZQuhGMZsLrJNM/ebNcuyznCct0cuhUKDFyW
 DcSZ7TIrl49lhXxyGhhKhLjDrqJ4Wq93/Tp9NGG2EIeePqix9A1oukDOgSTRRe7s
 +Gd12CQw0bF/z7jrvPYK1/TG+Per8AfnAf9xmB5KidkGFB+dx+wFAPKNyZAsPITX
 XuANJ0KVsO1XN/jJTa2Qo3XDcKTTb4setZZQZv08LHWk3ArzS+g6jVOfNhWf3tZ0
 I/c6UrymgfVIzjGe3UPJfA8CqZB0p4qdKe1Qt0pu17HpUmv5x1iy/XuUACfGzA/S
 PtnTN3jbuuy+vLRWBn5S
 =2+pm
 -----END PGP SIGNATURE-----

Merge tag 'remoteproc-3.15-cleanups' of git://git.kernel.org/pub/scm/linux/kernel/git/ohad/remoteproc

Pull remoteproc cleanups from Ohad Ben-Cohen:
 "Several remoteproc cleanup patches coming from Jingoo Han, Julia
  Lawall and Uwe Kleine-König"

* tag 'remoteproc-3.15-cleanups' of git://git.kernel.org/pub/scm/linux/kernel/git/ohad/remoteproc:
  remoteproc/ste_modem: staticize local symbols
  remoteproc/davinci: simplify use of devm_ioremap_resource
  remoteproc/davinci: drop needless devm_clk_put
2014-04-12 17:23:12 -07:00
Linus Torvalds
09c9b61d5d LLVMLinux Patches for v3.15
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.14 (GNU/Linux)
 
 iEYEABECAAYFAlNFtEkACgkQuseO5dulBZVcPwCdFWY81hKqQaKHaSPFh9m+n1lt
 yY0An2VZZGrFSkj162POFy1P2sPpGw5p
 =LRFZ
 -----END PGP SIGNATURE-----

Merge tag 'llvmlinux-for-v3.15' of git://git.linuxfoundation.org/llvmlinux/kernel

Pull llvm patches from Behan Webster:
 "These are some initial updates to support compiling the kernel with
  clang.

  These patches have been through the proper reviews to the best of my
  ability, and have been soaking in linux-next for a few weeks.  These
  patches by themselves still do not completely allow clang to be used
  with the kernel code, but lay the foundation for other patches which
  are still under review.

  Several other of the LLVMLinux patches have been already added via
  maintainer trees"

* tag 'llvmlinux-for-v3.15' of git://git.linuxfoundation.org/llvmlinux/kernel:
  x86: LLVMLinux: Fix "incomplete type const struct x86cpu_device_id"
  x86 kbuild: LLVMLinux: More cc-options added for clang
  x86, acpi: LLVMLinux: Remove nested functions from Thinkpad ACPI
  LLVMLinux: Add support for clang to compiler.h and new compiler-clang.h
  LLVMLinux: Remove warning about returning an uninitialized variable
  kbuild: LLVMLinux: Fix LINUX_COMPILER definition script for compilation with clang
  Documentation: LLVMLinux: Update Documentation/dontdiff
  kbuild: LLVMLinux: Adapt warnings for compilation with clang
  kbuild: LLVMLinux: Add Kbuild support for building kernel with Clang
2014-04-12 17:00:40 -07:00
Linus Torvalds
141eaccd01 Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending
Pull SCSI target updates from Nicholas Bellinger:
 "Here are the target pending updates for v3.15-rc1.  Apologies in
  advance for waiting until the second to last day of the merge window
  to send these out.

  The highlights this round include:

   - iser-target support for T10 PI (DIF) offloads (Sagi + Or)
   - Fix Task Aborted Status (TAS) handling in target-core (Alex Leung)
   - Pass in transport supported PI at session initialization (Sagi + MKP + nab)
   - Add WRITE_INSERT + READ_STRIP T10 PI support in target-core (nab + Sagi)
   - Fix iscsi-target ERL=2 ASYNC_EVENT connection pointer bug (nab)
   - Fix tcm_fc use-after-free of ft_tpg (Andy Grover)
   - Use correct ib_sg_dma primitives in ib_isert (Mike Marciniszyn)

  Also, note the virtio-scsi + vhost-scsi changes to expose T10 PI
  metadata into KVM guest have been left-out for now, as there where a
  few comments from MST + Paolo that where not able to be addressed in
  time for v3.15.  Please expect this feature for v3.16-rc1"

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (43 commits)
  ib_srpt: Use correct ib_sg_dma primitives
  target/tcm_fc: Rename ft_tport_create to ft_tport_get
  target/tcm_fc: Rename ft_{add,del}_lport to {add,del}_wwn
  target/tcm_fc: Rename structs and list members for clarity
  target/tcm_fc: Limit to 1 TPG per wwn
  target/tcm_fc: Don't export ft_lport_list
  target/tcm_fc: Fix use-after-free of ft_tpg
  target: Add check to prevent Abort Task from aborting itself
  target: Enable READ_STRIP emulation in target_complete_ok_work
  target/sbc: Add sbc_dif_read_strip software emulation
  target: Enable WRITE_INSERT emulation in target_execute_cmd
  target/sbc: Add sbc_dif_generate software emulation
  target/sbc: Only expose PI read_cap16 bits when supported by fabric
  target/spc: Only expose PI mode page bits when supported by fabric
  target/spc: Only expose PI inquiry bits when supported by fabric
  target: Pass in transport supported PI at session initialization
  target/iblock: Fix double bioset_integrity_free bug
  Target/sbc: Initialize COMPARE_AND_WRITE write_sg scatterlist
  target/rd: T10-Dif: RAM disk is allocating more space than required.
  iscsi-target: Fix ERL=2 ASYNC_EVENT connection pointer bug
  ...
2014-04-12 16:51:08 -07:00
Linus Torvalds
9309444906 Merge branch 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media fixes from Mauro Carvalho Chehab:
 "A series of bug fix patches for v3.15-rc1.  Most are just driver
  fixes.  There are some changes at remote controller core level, fixing
  some definitions on a new API added for Kernel v3.15.

  It also adds the missing include at include/uapi/linux/v4l2-common.h,
  to allow its compilation on userspace, as pointed by you"

* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (24 commits)
  [media] gpsca: remove the risk of a division by zero
  [media] stk1160: warrant a NUL terminated string
  [media] v4l: ti-vpe: retain v4l2_buffer flags for captured buffers
  [media] v4l: ti-vpe: Set correct field parameter for output and capture buffers
  [media] v4l: ti-vpe: zero out reserved fields in try_fmt
  [media] v4l: ti-vpe: Fix initial configuration queue data
  [media] v4l: ti-vpe: Use correct bus_info name for the device in querycap
  [media] v4l: ti-vpe: report correct capabilities in querycap
  [media] v4l: ti-vpe: Allow usage of smaller images
  [media] v4l: ti-vpe: Use video_device_release_empty
  [media] v4l: ti-vpe: Make sure in job_ready that we have the needed number of dst_bufs
  [media] lgdt3305: include sleep functionality in lgdt3304_ops
  [media] drx-j: use customise option correctly
  [media] m88rs2000: fix sparse static warnings
  [media] r820t: fix size and init values
  [media] rc-core: remove generic scancode filter
  [media] rc-core: split dev->s_filter
  [media] rc-core: do not change 32bit NEC scancode format for now
  [media] rtl28xxu: remove duplicate ID 0458:707f Genius TVGo DVB-T03
  [media] xc2028: add missing break to switch
  ...
2014-04-12 16:18:17 -07:00