The wireless core made a number of api changes that caused
the winbond driver to break. This patch fixes those errors by
making the needed changes to the driver.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The id_table field of the struct usb_device_id is constant in <linux/usb.h>
so it is worth to make the initialization data also constant.
The semantic match that finds this kind of pattern is as follows:
(http://coccinelle.lip6.fr/)
// <smpl>
@r@
disable decl_init,const_decl_init;
identifier I1, I2, x;
@@
struct I1 {
...
const struct I2 *x;
...
};
@s@
identifier r.I1, y;
identifier r.x, E;
@@
struct I1 y = {
.x = E,
};
@c@
identifier r.I2;
identifier s.E;
@@
const struct I2 E[] = ... ;
@depends on !c@
identifier r.I2;
identifier s.E;
@@
+ const
struct I2 E[] = ...;
// </smpl>
Signed-off-by: Németh Márton <nm127@freemail.hu>
Cc: Julia Lawall <julia@diku.dk>
Cc: cocci@diku.dk
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Change the wireless drivers to depend on CONFIG_WLAN instead of
CONFIG_WLAN_80211 which is going away soon.
Cc: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch adds a prepare_multicast callback for the winbond driver
to properly receive mc_count in ->configure_filter.
This also fixes incompatible pointer assignment build errors because
->configure_filter had changed.
This is build tested only, but that's more than the original code received.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
There's no point in keeping around struct members that are only written
to but never read.
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch removes the unused MLMEProcThread and MLMEReturnPacket
declarations and indents the header file.
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Within mac80211, we often need to copy the rx status into
skb->cb. This is wasteful, as drivers could be building it
in there to start with. This patch changes the API so that
drivers are expected to pass the RX status in skb->cb, now
accessible as IEEE80211_SKB_RXCB(skb). It also updates all
drivers to pass the rx status in there, but only by making
them memcpy() it into place before the call to the receive
function (ieee80211_rx(_irqsafe)). Each driver can now be
optimised on its own schedule.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
The commit 'mac80211: unify config_interface and bss_info_changed' from
Johannes Berg <johannes@sipsolutions.net> removed the config_interface structure
tag from struct ieee80211_ops. The BSSID detection functionality migrated to
ieee80211_ops.bss_info_changed.
Since wbsoft_config_interface() was largely empty, there wasn't much to do
other then to remove the function itself. There is currently no support
for BSSID change detection.
Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Impact: cleanup
The remaining functions are local to phy_calibration.c so move them
there and remove wbhal.c.
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Impact: cleanup
It's a trivial wrapper that is used in only one place, so lets inline it.
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Impact: cleanup
This patch moves all the functions in wbhal.c that are used only in
wbusb.c to the latter file.
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Impact: cleanup
In preparation for merging wbhal.c with wbusb.c, use Lindet to reformat
the file.
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Impact: cleanup
No need to keep read-only data on the stack.
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Impact: cleanup
The contact details in MODULE_AUTHOR do not reflect current state of
affairs so remove it.
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Impact: cleanup
Use scripts/Lindent on the file and clean up the rest by hand.
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Impact: cleanup
The hal_set_phy_type() is called in wb35_hw_init() only so inline the
function there. Also remove a redundant assignment of ->phy_type to
RF_WB_242_1.
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Impact: cleanup
Remove some useless comments and clean up others.
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Impact: cleanup
Now that hal_halt() is called from wb35_hw_halt() only where
->InitialResource is always set to 4, we can simplify
hal_init_hardware() and hal_halt().
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Impact: fix, cleanup
If initialization in hal_init_hardware() fails, we call hal_halt() to
clean up and release resource. However, hal_halt() will attempt to
call del_timer_sync() on ->LEDTimer on "stage 3" although it's not
initialized at that point. Fix that up by simplifying error handling
logic in hal_init_hardware() with gotos.
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Impact: cleanup
Use gotos to simplify the deep if-statement nesting in
hal_init_hardware().
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Impact: cleanup
Change hal_init_hardware() to return an error code rather than a boolean
to simplify error handling in wb35_hw_init().
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Impact: cleanup
The hal_init_hardware() and hal_halt() functions are only used in
wbusb.c so move them there.
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Impact: cleanup
This patch replaces the switch-based error handling in wb35_hw_init()
with regular gotos.
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
We don't initialize hardware multicast filter in the driver nor do we know how
to do that. Therefore, remove some code that isn't actually used from
wbsoft_configure_filter().
Cc: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The semantic patch that makes this change is:
(http://www.emn.fr/x-info/coccinelle/)
@@ expression E; constant C; @@
(
- !E == C
+ E != C
)
Signed-off-by: Diego Liziero <diegoliz@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Impact: fix module removal
This patch fixes an oops when the w35und module is removed from the
kernel and added back.
Reported-by: luoyi <luoyi.ly@gmail.com>
Tested-by: Sandro Bonazzola <sandro.bonazzola@gmail.com>
Cc: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The gl_80211.h header file contains only two definitions that are actually
used. Move them to mds_s.h and remove the otherwise unused file.
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The ds_tkip.h header file contains declarations of a function that is not
actually defined anywhere.
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Acked-by: Pavel Machek <pavel@ucw.cz>
The bssdscpt.h header file contains definitions that are not actually used for
anything.
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
As this typedef is used everywhere in the driver, remove it in a separate
patch.
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Acked-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch removes some typedefs from the driver code. I also removed some
unused structs I spotted while removing the typedefs.
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Acked-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The only remaining thing in common.h header file is the WBDEBUG() macro which
is unconditionally defined as printk(). Kill the macro and remove the header
file.
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Acked-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The DebugUsbdStatusInformation macro doesn't do anything useful so remove the
definition and the two users of it from driver code.
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Acked-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
As suggested by Harvey Harrison, convert driver to use ETH_ALEN and kill a
private macro from common.h that is used for the same thing.
Acked-by: Harvey Harrison <harvey.harrison@gmail.com>
Acked-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
No need to keep function definitions separate from the rest so unify mto.h and
mto_f.h header files.
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Acked-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>