If there is no interrupt defined in the dts 'irq_of_parse_and_map'
returns 0 and we should't set up interrupts for each gpio chip in
that case.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Function 'to_mediatek_gpio' cannot return NULL, so this NULL
checkings are pointless.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There was two remaining defines which weren't properly
aligned with the rest. Align them improving readability.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Update kernel doc for mtk_data and also remove no needed
documentation for mtk_gc which is clear enough to don't
need it.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
PIN_MASK macro was being used because of the fact we were only
using one interrupt controller for all of the gpio chips. This
has been changed to use one per gpio chip and each has 32 irqs.
Because of this this macro is not needed anymore. Use BIT macro
instead.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Instead of create a custom irq_domain for this chip, use
'gpiochip_set_chained_irqchip' from GPIOLIB_IRQCHIP. It
is ok to call this function several times. We have to
manually mark the line with 'IRQF_SHARED' and then loop
over the three banks until you find a hit. There were
some problems with removing an irqchip like that but this
driver is a bool so it might work just fine. After this
changes the functions 'mediatek_gpio_to_irq' is not needed
anymore and also the 'gpio_irq_domain' field from the state
container. Instead of use the custom irq domain in the irq
handler use the associated domain from the gpio_chip in
'irq_find_mapping' function. Function 'mediatek_gpio_bank_probe'
has been moved a it to the botton to have all the irq related
functions together and avoid some forward declarations to resolve
some symbols along the code.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This chip support high level and low level interrupts. Those
have to be implemented also to get a complete and clean driver.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit adds kerneldoc for the two data containers in
order to better understanding of its existence.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This driver is actually platform-agnostic. Add COMPILE_TEST for
the compilation test coverage.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When implementing custom irqchips it is important to also
implement .irq_request_resources() and .irq_release_resources()
and make sure these call gpiochip_[un]lock_as_irq().
Add those two for this driver. Also store struct device pointer
in global state structure to be able to use 'dev_err' with the
device from 'mediatek_request_resources' function.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This driver was being registered using 'module_platform_driver'
but it is not a module at all. Instead of this use
'builtin_platform_driver' which seems to be the correct one.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Including file '<linux/gpio.h>' should be avoided in
new drivers code, so just remove it because it is
no necessary at all.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Gpio complexity is just masking the fact that offset is always
0..n and writes to bits 0..n of some memory address. Because
of this whole thing can just me converted to use GPIO_GENERIC
and avoid duplications of a lot of driver custom functions.
So use bgpio_init instead of custom code adding GPIO_GENERIC
dependency to the Kconfig file. Also to make easier using
bgpio_init function offset for each gpio bank, enumeration
where register were defined has been replaced in favour of
some macros which handle each gpio offset taking into account
the bank where are located. Because of this change write and
read functions which are being used for remaining irq handling
stuff have been updated also as well as its dependencies along
the code.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use eth_hw_addr_random() to set a random dev_addr and update
addr_assign_type.
Fixes: e3cbf478f8 ('staging: mt7621-eth: add the drivers core files')
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix memory leak in error path of mtk_add_mac() by make sure to free
the allocated netdev.
Fixes: e3cbf478f8 ('staging: mt7621-eth: add the drivers core files')
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This currently fixes the remaining dtb warnings:
Node /pcie@1e140000/pcie0 has a reg or ranges property, but no unit name
Node /pcie@1e140000/pcie1 has a reg or ranges property, but no unit name
Node /pcie@1e140000/pcie2 has a reg or ranges property, but no unit name
Node /pcie@1e140000/pcie0 node name is not "pci" or "pcie"
Node /pcie@1e140000/pcie0 missing ranges for PCI bridge (or not a bridge)
Node /pcie@1e140000/pcie0 missing bus-range for PCI bridge
Node /pcie@1e140000/pcie1 node name is not "pci" or "pcie"
Node /pcie@1e140000/pcie1 missing ranges for PCI bridge (or not a bridge)
Node /pcie@1e140000/pcie1 missing bus-range for PCI bridge
Node /pcie@1e140000/pcie2 node name is not "pci" or "pcie"
Node /pcie@1e140000/pcie2 missing ranges for PCI bridge (or not a bridge)
Node /pcie@1e140000/pcie2 missing bus-range for PCI bridge
Warning (unit_address_format): Failed prerequisite 'pci_bridge'
Warning (pci_device_reg): Failed prerequisite 'pci_bridge'
Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge'
device_type was removed since according to documentation, it's deprecated
for pci(e) devices.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The response type of the SD_APP_OP_COND command is correctly
determined using the mmc_resp_type macro, because the only use of that
opcode, mmc_send_app_op_cond, correctly places MMC_RSP_R3 in cmd.flags.
So there is no need to treat that opcode separately.
Signed-off-by: Christian Lütke-Stetzkamp <christian@lkamp.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The response type of the MMC_SEND_OP_COND command is correctly
determined using the mmc_resp_type macro, because the only use of that
opcode, mmc_send_op_cond, correctly places MMC_RSP_R3 in cmd.flags.
So there is no need to treat that opcode separately.
Signed-off-by: Christian Lütke-Stetzkamp <christian@lkamp.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently msdc_command_start does multiple things and is hard to read,
so factor out the finding of the response type.
Signed-off-by: Christian Lütke-Stetzkamp <christian@lkamp.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The argument tune of msdc_do_command is never used, so remove it.
Signed-off-by: Christian Lütke-Stetzkamp <christian@lkamp.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The macro is_card_present is unused and also a duplicate of a macro in
mmc, so remove it.
Signed-off-by: Christian Lütke-Stetzkamp <christian@lkamp.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The define MAX_PHY_SGMTS is never used, so remove it.
Signed-off-by: Christian Lütke-Stetzkamp <christian@lkamp.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The enum msdc_mode is never used, so remove it.
Signed-off-by: Christian Lütke-Stetzkamp <christian@lkamp.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The define IRQ_SDC is never used, so remove it.
Signed-off-by: Christian Lütke-Stetzkamp <christian@lkamp.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The define RALINK_MSDC_BASE is never used, so remove it.
Signed-off-by: Christian Lütke-Stetzkamp <christian@lkamp.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently the base address for all io operations is hidden behind a
macro, REG_ADD. This macro uses the symbol "base" as the base address
and all functions set base = host->base. This is hard to read, so the
whole wrapping is removed and host->base is directly inserted in the
io access.
Signed-off-by: Christian Lütke-Stetzkamp <christian@lkamp.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The MSDC_MODE_* defines are all never used and do not contain any
information about the device, so remove them.
Signed-off-by: Christian Lütke-Stetzkamp <christian@lkamp.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The variable cmd in the function msdc_tune_request is set but never
used, so remove it.
Signed-off-by: Christian Lütke-Stetzkamp <christian@lkamp.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The macro MAX_BD_PER_GPD is never used, so remove it.
Signed-off-by: Christian Lütke-Stetzkamp <christian@lkamp.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The macro msdc_retry is never used, so remove it.
Signed-off-by: Christian Lütke-Stetzkamp <christian@lkamp.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In the current code, msdc_clr_fifo is a macro and just busy waits for
a limited amount of time for the fifo clear to finish. That is not
correct, the programming manual hits, that the user should wait until
the bit is cleared by hardware and not a limited amount of time.
So the code is changed to a function, that also relaxes the cpu while
busy waiting.
Signed-off-by: Christian Lütke-Stetzkamp <christian@lkamp.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The BUG_ON() removed by this patch is just a duplicate of a prior
BUG_ON() statement. There the condition is just clearer, it checks
weather sglen > MAX_BD_NUM and MAX_BD_NUM is equal MAX_BD_PER_GPD. So
this statement can be safely removed.
Signed-off-by: Christian Lütke-Stetzkamp <christian@lkamp.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The variable num in msdc_dma_setup is only used for a BUG_ON
statement, so it can be removed by inlining the condition.
Signed-off-by: Christian Lütke-Stetzkamp <christian@lkamp.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The field sglen from struct msdc_dma is once set and never read, so
remove it.
Signed-off-by: Christian Lütke-Stetzkamp <christian@lkamp.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The field sg from struct msdc_dma is once set and never read, so
remove it.
Signed-off-by: Christian Lütke-Stetzkamp <christian@lkamp.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Current code uses two functions for dma setup, msdc_dma_config and
msdc_dma_setup. By now msdc_dma_setup is nearly empty and mainly calls
msdc_dma_config, so the later one can be inline into the first
one. While doing this there is also some refactoring done.
Signed-off-by: Christian Lütke-Stetzkamp <christian@lkamp.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The field mode of struct msdc_dma has no remaining use, so remove it.
Signed-off-by: Christian Lütke-Stetzkamp <christian@lkamp.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The driver currently only uses DMA linked mode and the upstream
driver does the same, so remove the basic mode code.
Signed-off-by: Christian Lütke-Stetzkamp <christian@lkamp.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Current code has structures for all the registers of the device, but
these are never used and there are also masks for all of them, so
these structures do not contain any useful information.
Signed-off-by: Christian Lütke-Stetzkamp <christian@lkamp.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The macro sdr_write8 is never used, so remove it.
Signed-off-by: Christian Lütke-Stetzkamp <christian@lkamp.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The macro sdr_read8 is never used, so remove it.
Signed-off-by: Christian Lütke-Stetzkamp <christian@lkamp.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The current code uses a macro (sdr_read32) for reading from hardware,
but it is only a readl, so replace it to get nearer to upstream code.
Signed-off-by: Christian Lütke-Stetzkamp <christian@lkamp.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The current code uses a macro (sdr_write32) for writing to hardware,
but it is only a writel with switched arguments, so replace it to get
nearer to upstream code.
Signed-off-by: Christian Lütke-Stetzkamp <christian@lkamp.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The macro msdc_rxfifocnt is never used, so remove it.
Signed-off-by: Christian Lütke-Stetzkamp <christian@lkamp.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The macro msdc_txfifocnt is never used, so remove it.
Signed-off-by: Christian Lütke-Stetzkamp <christian@lkamp.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The macro msdc_fifo_read32 is never used, so remove it.
Signed-off-by: Christian Lütke-Stetzkamp <christian@lkamp.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The macro msdc_fifo_write32 is never used, so remove it.
Signed-off-by: Christian Lütke-Stetzkamp <christian@lkamp.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The macro msdc_fifo_read8 is never used, so remove it.
Signed-off-by: Christian Lütke-Stetzkamp <christian@lkamp.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The macro msdc_fifo_write8 is never used, so remove it.
Signed-off-by: Christian Lütke-Stetzkamp <christian@lkamp.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The variable resp in msdc_command_resp is once set and never read,
delete it.
Signed-off-by: Christian Lütke-Stetzkamp <christian@lkamp.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
