Just use bio_for_each_segment_all to iterate over all segments.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Pass the full bio to the decompression routines and use bio iterators
to iterate over the data in the bio.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David Sterba <dsterba@suse.com>
This fixes the WARN_ON on BTRFS_I(inode)->reserved_extents in
btrfs_destroy_inode and the WARN_ON on nonzero delalloc bytes on umount
with qgroups enabled.
I was able to reproduce this by setting up a small (~500kb) quota limit
and writing a file one byte at a time until I hit the limit. The warnings
would all hit on umount.
The root cause is that we would reserve a block-sized range in both
the reservation and the quota in btrfs_check_data_free_space, but if we
encountered a problem (like e.g. EDQUOT), we would only release the single
byte in the qgroup reservation. That caused an iotree state split, which
increased the number of outstanding extents, in turn disallowing releasing
the metadata reservation.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Reviewed-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
At this point we will have dropped extent entries from the file, so if we fail
to insert the new hole entries then we are leaving the fs in a corrupt state
(albeit an easily fixed one). Abort the transaciton if this happens so we can
avoid corrupting the fs. Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In order to do hole punching we have a block reserve to hold the reservation we
need to drop the extents in our range. Since we could end up dropping a lot of
extents we set rsv->failfast so we can just loop around again and drop the
remaining of the range. Unfortunately we unconditionally fill the hole extents
in and start from the last extent we encountered, which we may or may not have
dropped. So this can result in overlapping file extent entries, which can be
tripped over in a variety of ways, either by hitting BUG_ON(!ret) in
fill_holes() after the search, or in btrfs_set_item_key_safe() in
btrfs_drop_extent() at a later time by an unrelated task. Fix this by only
setting drop_end to the last extent we did actually drop. This way our holes
are filled in properly for the range that we did drop, and the rest of the range
that remains to be dropped is actually dropped. Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
If we process the last item in the leaf and hit an I/O error while
reading the next leaf, we return -EIO without having adjusted the
position. Since we have emitted dirents, getdents() will return
the byte count to the user instead of the error. Subsequent callers
will emit the last successful dirent again, and return -EIO again,
with the same result. Callers loop forever.
Instead, if we always increment ctx->pos after emitting or skipping
the dirent, we'll be sure that we won't hit the same one again. When
we go to process the next leaf, we won't have emitted any dirents
and the -EIO will be returned to the user properly. We also don't
need to track if we've emitted a dirent already or if we've changed
the position yet.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Commit 3de4586c52 (Btrfs: Allow subvolumes and snapshots anywhere
in the directory tree) introduced the current system of placing
snapshots in the directory tree. It also introduced the behavior of
creating the snapshot and then creating the directory entries for it.
We've kept this code around for compatibility reasons, but it turns
out that no file systems with the old tree_root based snapshots can
be mounted on newer (>= 2009) kernels anyway. About a month after the
above commit, commit 2a7108ad89 (Btrfs: rev the disk format for the
inode compat and csum selection changes) landed, changing the superblock
magic number.
As a result, we know that we'll never encounter tree_root-based dirents
or have to deal with skipping our own snapshot dirents. Since that
also means that we're now only iterating over DIR_INDEX items, which only
contain one directory entry per leaf item, we don't need to loop over
the leaf item contents anymore either.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
If zlib_inflateInit2 fails, the input page is never unmapped.
Add a call to kunmap when it fails.
Signed-off-by: Nick Terrell <nickrterrell@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The balance status item contains currently known filter values, but the
stripes filter was unintentionally not among them. This would mean, that
interrupted and automatically restarted balance does not apply the
stripe filters.
Fixes: dee32d0ac3
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: David Sterba <dsterba@suse.com>
'btrfs_iget()' can not return NULL, so this test can be removed.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
csum member of struct btrfs_super_block has array type of u8. It makes
sense that function btrfs_csum_final should be also declared to accept
u8 *. I changed the declaration of method void btrfs_csum_final(u32 crc,
char *result); to void btrfs_csum_final(u32 crc, u8 *result);
Signed-off-by: Domagoj Tršan <domagoj.trsan@gmail.com>
[ changed cast to u8 at several call sites ]
Signed-off-by: David Sterba <dsterba@suse.com>
If we have
|0--hole--4095||4096--preallocate--12287|
instead of using preallocated space, a 8K direct write will just
create a new 8K extent and it'll end up with
|0--new extent--8191||8192--preallocate--12287|
It's because we find a hole em and then go to create a new 8K
extent directly without adjusting @len.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: Chris Mason <clm@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There is no need to call kfree() if memdup_user() fails, as no memory
was allocated and the error in the error-valued pointer should be returned.
Signed-off-by: Shailendra Verma <shailendra.v@samsung.com>
[ edit subject ]
Signed-off-by: David Sterba <dsterba@suse.com>
Using copy_extent_buffer is suitable for copying betwenn buffers from an
arbitrary offset and deals with page boundaries. This is not necessary
when doing a full extent_buffer-to-extent_buffer copy. We can utilize
the copy_page helper as well.
Signed-off-by: David Sterba <dsterba@suse.com>
The only memset we do is to 0, so sink the parameter to the function and
simplify all calls. Rename the function to reflect the behaviour.
Signed-off-by: David Sterba <dsterba@suse.com>
The fsid and chunk tree uuid are always located in the first page,
we don't need the to use write_extent_buffer.
Signed-off-by: David Sterba <dsterba@suse.com>
During the time, the function has been shrunk to the point that it just
calls find_extent_buffer, just passing the parameters.
Signed-off-by: David Sterba <dsterba@suse.com>
We dereference fs_info several times, besides that post-mount functions
should never see a NULL fs_info.
Signed-off-by: David Sterba <dsterba@suse.com>
The lock is held, we make the same lookup that previously failed with
EEXIST and we don't insert NULL pointers.
Signed-off-by: David Sterba <dsterba@suse.com>
Originally, the eb and start were passed separately in case eb is NULL.
Since the readahead has been refactored in 4.6, this is not true anymore
and we can get rid of the parameter.
Signed-off-by: David Sterba <dsterba@suse.com>
'start' is not used since "btrfs: reada: Pass reada_extent into
__readahead_hook directly" (6e39dbe8b9).
Signed-off-by: David Sterba <dsterba@suse.com>
We can't touch the eb directly in case the function is called with a
non-zero error, so we can read the eb level when needed.
Signed-off-by: David Sterba <dsterba@suse.com>
The helpers are not meant to be generic, the name is misleading. Convert
them to static inlines for type checking.
Signed-off-by: David Sterba <dsterba@suse.com>
They're not even documented anywhere, letting users with no recourse but
to RTFS. It's no big burden to output the bitfield as words.
Also, display unknown flags as hex.
Signed-off-by: Adam Borowski <kilobyte@angband.pl>
Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Signed-off-by: David Sterba <dsterba@suse.com>
My QEMU VM was seeing inexplicable I/O errors that I tracked down to
errors coming from the qcow2 virtual drive in the host system. The qcow2
file is a nocow file on my Btrfs drive, which QEMU opens with O_DIRECT.
Every once in awhile, pread() or pwrite() would return EEXIST, which
makes no sense. This turned out to be a bug in btrfs_get_extent().
Commit 8dff9c8534 ("Btrfs: deal with duplciates during extent_map
insertion in btrfs_get_extent") fixed a case in btrfs_get_extent() where
two threads race on adding the same extent map to an inode's extent map
tree. However, if the added em is merged with an adjacent em in the
extent tree, then we'll end up with an existing extent that is not
identical to but instead encompasses the extent we tried to add. When we
call merge_extent_mapping() to find the nonoverlapping part of the new
em, the arithmetic overflows because there is no such thing. We then end
up trying to add a bogus em to the em_tree, which results in a EEXIST
that can bubble all the way up to userspace.
Fix it by extending the identical extent map special case.
Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Tickets_id's name may result in some misunderstandings, it just indicates
the next ticket will be handled and is not stored per ticket.
Fixes: ce12965 ("btrfs: introduce tickets_id to determine whether
asynchronous metadata reclaim work makes progress")
Signed-off-by: Wang Xiaoguang <wangxg.fnst@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_map_block supports different types of mappings, which to a large
extent resemble block layer operations. But they don't always do, and
currently btrfs dangerously overlays it's own flag over the block layer
flags. This is just asking for a conflict, so introduce a different
map flags enum inside of btrfs instead.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We were setting the qgroup_rescan_running flag to true only after the
rescan worker started (which is a task run by a queue). So if a user
space task starts a rescan and immediately after asks to wait for the
rescan worker to finish, this second call might happen before the rescan
worker task starts running, in which case the rescan wait ioctl returns
immediatley, not waiting for the rescan worker to finish.
This was making the fstest btrfs/022 fail very often.
Fixes: d2c609b834 (btrfs: properly track when rescan worker is running)
Cc: stable@vger.kernel.org # 4.4+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
This can only happen with CONFIG_BTRFS_FS_CHECK_INTEGRITY=y.
Commit 1ba98d0 ("Btrfs: detect corruption when non-root leaf has zero item")
assumes that a leaf is its root when leaf->bytenr == btrfs_root_bytenr(root),
however, we should not use btrfs_root_bytenr(root) since it's mainly got
updated during committing transaction. So the check can fail when doing
COW on this leaf while it is a root.
This changes to use "if (leaf == btrfs_root_node(root))" instead, just like
how we check whether leaf is a root in __btrfs_cow_block().
Fixes: 1ba98d086f (Btrfs: detect corruption when non-root leaf has zero item)
Cc: stable@vger.kernel.org # 4.8+
Reported-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
After the last big change in the delayed references code that was needed
for the last qgroups rework, the red black tree node field of struct
btrfs_delayed_ref_node is no longer used, so just remove it, this helps
us save some memory (since struct rb_node is 24 bytes on x86_64) for
these structures.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
In commit 5bc7247ac4 (Btrfs: fix broken nocow after balance) we started
abusing the rtransid and otransid fields of root items from relocation
trees to fix some issues with nodatacow mode. However later in commit
ba8b028933 (Btrfs: do not reset last_snapshot after relocation) we
dropped the code that made use of those fields but did not remove
the code that sets those fields.
So just remove them to avoid confusion.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
During relocation of a data block group we create a relocation tree
for each fs/subvol tree by making a snapshot of each tree using
btrfs_copy_root() and the tree's commit root, and then setting the last
snapshot field for the fs/subvol tree's root to the value of the current
transaction id minus 1. However this can lead to relocation later
dropping references that it did not create if we have qgroups enabled,
leaving the filesystem in an inconsistent state that keeps aborting
transactions.
Lets consider the following example to explain the problem, which requires
qgroups to be enabled.
We are relocating data block group Y, we have a subvolume with id 258 that
has a root at level 1, that subvolume is used to store directory entries
for snapshots and we are currently at transaction 3404.
When committing transaction 3404, we have a pending snapshot and therefore
we call btrfs_run_delayed_items() at transaction.c:create_pending_snapshot()
in order to create its dentry at subvolume 258. This results in COWing
leaf A from root 258 in order to add the dentry. Note that leaf A
also contains file extent items referring to extents from some other
block group X (we are currently relocating block group Y). Later on, still
at create_pending_snapshot() we call qgroup_account_snapshot(), which
switches the commit root for root 258 when it calls switch_commit_roots(),
so now the COWed version of leaf A, lets call it leaf A', is accessible
from the commit root of tree 258. At the end of qgroup_account_snapshot(),
we call record_root_in_trans() with 258 as its argument, which results
in btrfs_init_reloc_root() being called, which in turn calls
relocation.c:create_reloc_root() in order to create a relocation tree
associated to root 258, which results in assigning the value of 3403
(which is the current transaction id minus 1 = 3404 - 1) to the
last_snapshot field of root 258. When creating the relocation tree root
at ctree.c:btrfs_copy_root() we add a shared reference for leaf A',
corresponding to the relocation tree's root, when we call btrfs_inc_ref()
against the COWed root (a copy of the commit root from tree 258), which
is at level 1. So at this point leaf A' has 2 references, one normal
reference corresponding to root 258 and one shared reference corresponding
to the root of the relocation tree.
Transaction 3404 finishes its commit and transaction 3405 is started by
relocation when calling merge_reloc_root() for the relocation tree
associated to root 258. In the meanwhile leaf A' is COWed again, in
response to some filesystem operation, when we are still at transaction
3405. However when we COW leaf A', at ctree.c:update_ref_for_cow(), we
call btrfs_block_can_be_shared() in order to figure out if other trees
refer to the leaf and if any such trees exists, add a full back reference
to leaf A' - but btrfs_block_can_be_shared() incorrectly returns false
because the following condition is false:
btrfs_header_generation(buf) <= btrfs_root_last_snapshot(&root->root_item)
which evaluates to 3404 <= 3403. So after leaf A' is COWed, it stays with
only one reference, corresponding to the shared reference we created when
we called btrfs_copy_root() to create the relocation tree's root and
btrfs_inc_ref() ends up not being called for leaf A' nor we end up setting
the flag BTRFS_BLOCK_FLAG_FULL_BACKREF in leaf A'. This results in not
adding shared references for the extents from block group X that leaf A'
refers to with its file extent items.
Later, after merging the relocation root we do a call to to
btrfs_drop_snapshot() in order to delete the relocation tree. This ends
up calling do_walk_down() when path->slots[1] points to leaf A', which
results in calling btrfs_lookup_extent_info() to get the number of
references for leaf A', which is 1 at this time (only the shared reference
exists) and this value is stored at wc->refs[0]. After this walk_up_proc()
is called when wc->level is 0 and path->nodes[0] corresponds to leaf A'.
Because the current level is 0 and wc->refs[0] is 1, it does call
btrfs_dec_ref() against leaf A', which results in removing the single
references that the extents from block group X have which are associated
to root 258 - the expectation was to have each of these extents with 2
references - one reference for root 258 and one shared reference related
to the root of the relocation tree, and so we would drop only the shared
reference (because leaf A' was supposed to have the flag
BTRFS_BLOCK_FLAG_FULL_BACKREF set).
This leaves the filesystem in an inconsistent state as we now have file
extent items in a subvolume tree that point to extents from block group X
without references in the extent tree. So later on when we try to decrement
the references for these extents, for example due to a file unlink operation,
truncate operation or overwriting ranges of a file, we fail because the
expected references do not exist in the extent tree.
This leads to warnings and transaction aborts like the following:
[ 588.965795] ------------[ cut here ]------------
[ 588.965815] WARNING: CPU: 2 PID: 2479 at fs/btrfs/extent-tree.c:1625 lookup_inline_extent_backref+0x432/0x5b0 [btrfs]
[ 588.965816] Modules linked in: af_packet iscsi_ibft iscsi_boot_sysfs xfs libcrc32c ppdev acpi_cpufreq button tpm_tis e1000 i2c_piix4 pcspkr parport_pc
parport tpm qemu_fw_cfg joydev btrfs xor raid6_pq sr_mod cdrom ata_generic virtio_scsi ata_piix virtio_pci bochs_drm virtio_ring drm_kms_helper syscopyarea
sysfillrect sysimgblt fb_sys_fops virtio ttm serio_raw drm floppy sg
[ 588.965831] CPU: 2 PID: 2479 Comm: kworker/u8:7 Not tainted 4.7.3-3-default-fdm+ #1
[ 588.965832] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.1-0-gb3ef39f-prebuilt.qemu-project.org 04/01/2014
[ 588.965844] Workqueue: btrfs-extent-refs btrfs_extent_refs_helper [btrfs]
[ 588.965845] 0000000000000000 ffff8802263bfa28 ffffffff813af542 0000000000000000
[ 588.965847] 0000000000000000 ffff8802263bfa68 ffffffff81081e8b 0000065900000000
[ 588.965848] ffff8801db2af000 000000012bbe2000 0000000000000000 ffff880215703b48
[ 588.965849] Call Trace:
[ 588.965852] [<ffffffff813af542>] dump_stack+0x63/0x81
[ 588.965854] [<ffffffff81081e8b>] __warn+0xcb/0xf0
[ 588.965855] [<ffffffff81081f7d>] warn_slowpath_null+0x1d/0x20
[ 588.965863] [<ffffffffa0175042>] lookup_inline_extent_backref+0x432/0x5b0 [btrfs]
[ 588.965865] [<ffffffff81143220>] ? trace_clock_local+0x10/0x30
[ 588.965867] [<ffffffff8114c5df>] ? rb_reserve_next_event+0x6f/0x460
[ 588.965875] [<ffffffffa0175215>] insert_inline_extent_backref+0x55/0xd0 [btrfs]
[ 588.965882] [<ffffffffa017531f>] __btrfs_inc_extent_ref.isra.55+0x8f/0x240 [btrfs]
[ 588.965890] [<ffffffffa017acea>] __btrfs_run_delayed_refs+0x74a/0x1260 [btrfs]
[ 588.965892] [<ffffffff810cb046>] ? cpuacct_charge+0x86/0xa0
[ 588.965900] [<ffffffffa017e74f>] btrfs_run_delayed_refs+0x9f/0x2c0 [btrfs]
[ 588.965908] [<ffffffffa017ea04>] delayed_ref_async_start+0x94/0xb0 [btrfs]
[ 588.965918] [<ffffffffa01c799a>] btrfs_scrubparity_helper+0xca/0x350 [btrfs]
[ 588.965928] [<ffffffffa01c7c5e>] btrfs_extent_refs_helper+0xe/0x10 [btrfs]
[ 588.965930] [<ffffffff8109b323>] process_one_work+0x1f3/0x4e0
[ 588.965931] [<ffffffff8109b658>] worker_thread+0x48/0x4e0
[ 588.965932] [<ffffffff8109b610>] ? process_one_work+0x4e0/0x4e0
[ 588.965934] [<ffffffff810a1659>] kthread+0xc9/0xe0
[ 588.965936] [<ffffffff816f2f1f>] ret_from_fork+0x1f/0x40
[ 588.965937] [<ffffffff810a1590>] ? kthread_worker_fn+0x170/0x170
[ 588.965938] ---[ end trace 34e5232c933a1749 ]---
[ 588.966187] ------------[ cut here ]------------
[ 588.966196] WARNING: CPU: 2 PID: 2479 at fs/btrfs/extent-tree.c:2966 btrfs_run_delayed_refs+0x28c/0x2c0 [btrfs]
[ 588.966196] BTRFS: Transaction aborted (error -5)
[ 588.966197] Modules linked in: af_packet iscsi_ibft iscsi_boot_sysfs xfs libcrc32c ppdev acpi_cpufreq button tpm_tis e1000 i2c_piix4 pcspkr parport_pc
parport tpm qemu_fw_cfg joydev btrfs xor raid6_pq sr_mod cdrom ata_generic virtio_scsi ata_piix virtio_pci bochs_drm virtio_ring drm_kms_helper syscopyarea
sysfillrect sysimgblt fb_sys_fops virtio ttm serio_raw drm floppy sg
[ 588.966206] CPU: 2 PID: 2479 Comm: kworker/u8:7 Tainted: G W 4.7.3-3-default-fdm+ #1
[ 588.966207] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.1-0-gb3ef39f-prebuilt.qemu-project.org 04/01/2014
[ 588.966217] Workqueue: btrfs-extent-refs btrfs_extent_refs_helper [btrfs]
[ 588.966217] 0000000000000000 ffff8802263bfc98 ffffffff813af542 ffff8802263bfce8
[ 588.966219] 0000000000000000 ffff8802263bfcd8 ffffffff81081e8b 00000b96345ee000
[ 588.966220] ffffffffa021ae1c ffff880215703b48 00000000000005fe ffff8802345ee000
[ 588.966221] Call Trace:
[ 588.966223] [<ffffffff813af542>] dump_stack+0x63/0x81
[ 588.966224] [<ffffffff81081e8b>] __warn+0xcb/0xf0
[ 588.966225] [<ffffffff81081eff>] warn_slowpath_fmt+0x4f/0x60
[ 588.966233] [<ffffffffa017e93c>] btrfs_run_delayed_refs+0x28c/0x2c0 [btrfs]
[ 588.966241] [<ffffffffa017ea04>] delayed_ref_async_start+0x94/0xb0 [btrfs]
[ 588.966250] [<ffffffffa01c799a>] btrfs_scrubparity_helper+0xca/0x350 [btrfs]
[ 588.966259] [<ffffffffa01c7c5e>] btrfs_extent_refs_helper+0xe/0x10 [btrfs]
[ 588.966260] [<ffffffff8109b323>] process_one_work+0x1f3/0x4e0
[ 588.966261] [<ffffffff8109b658>] worker_thread+0x48/0x4e0
[ 588.966263] [<ffffffff8109b610>] ? process_one_work+0x4e0/0x4e0
[ 588.966264] [<ffffffff810a1659>] kthread+0xc9/0xe0
[ 588.966265] [<ffffffff816f2f1f>] ret_from_fork+0x1f/0x40
[ 588.966267] [<ffffffff810a1590>] ? kthread_worker_fn+0x170/0x170
[ 588.966268] ---[ end trace 34e5232c933a174a ]---
[ 588.966269] BTRFS: error (device sda2) in btrfs_run_delayed_refs:2966: errno=-5 IO failure
[ 588.966270] BTRFS info (device sda2): forced readonly
This was happening often on openSUSE and SLE systems using btrfs as the
root filesystem (with its default layout where multiple subvolumes are
used) where balance happens in the background triggered by a cron job and
snapshots are automatically created before/after package installations,
upgrades and removals. The issue could be triggered simply by running the
following loop on the first system boot post installation:
while true; do
zypper -n in nfs-kernel-server
zypper -n rm nfs-kernel-server
done
(If we were fast enough and made that loop before the cron job triggered
a balance operation and the balance finished)
So fix by setting the last_snapshot field of the root to the value of the
generation of its commit root. Like this btrfs_block_can_be_shared()
behaves correctly for the case where the relocation root is created during
a transaction commit and for the case where it's created before a
transaction commit.
Fixes: 6426c7ad69 (btrfs: qgroup: Fix qgroup accounting when creating snapshot)
Cc: stable@vger.kernel.org # 4.7+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Pull btrfs fixes from Chris Mason:
"Some fixes that Dave Sterba collected. We held off on these last week
because I was focused on the memory corruption testing"
* 'for-4.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix WARNING in btrfs_select_ref_head()
Btrfs: remove some no-op casts
btrfs: pass correct args to btrfs_async_run_delayed_refs()
btrfs: make file clone aware of fatal signals
btrfs: qgroup: Prevent qgroup->reserved from going subzero
Btrfs: kill BUG_ON in do_relocation
Remove the WRITE_* and READ_SYNC wrappers, and just use the flags
directly. Where applicable this also drops usage of the
bio_set_op_attrs wrapper.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
Pull btrfs fixes from Chris Mason:
"My patch fixes the btrfs list_head abuse that we tracked down during
Dave Jones' memory corruption investigation. With both Jens and my
patches in place, I'm no longer able to trigger problems.
Filipe is fixing a difficult old bug between snapshots, balance and
send. Dave is cooking a few more for the next rc, but these are tested
and ready"
* 'for-linus-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
btrfs: fix races on root_log_ctx lists
btrfs: fix incremental send failure caused by balance
Now that we don't need the common flags to overflow outside the range
of a 32-bit type we can encode them the same way for both the bio and
request fields. This in addition allows us to place the operation
first (and make some room for more ops while we're at it) and to
stop having to shift around the operation values.
In addition this allows passing around only one value in the block layer
instead of two (and eventuall also in the file systems, but we can do
that later) and thus clean up a lot of code.
Last but not least this allows decreasing the size of the cmd_flags
field in struct request to 32-bits. Various functions passing this
value could also be updated, but I'd like to avoid the churn for now.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
btrfs_remove_all_log_ctxs takes a shortcut where it avoids walking the
list because it knows all of the waiters are patiently waiting for the
commit to finish.
But, there's a small race where btrfs_sync_log can remove itself from
the list if it finds a log commit is already done. Also, it uses
list_del_init() to remove itself from the list, but there's no way to
know if btrfs_remove_all_log_ctxs has already run, so we don't know for
sure if it is safe to call list_del_init().
This gets rid of all the shortcuts for btrfs_remove_all_log_ctxs(), and
just calls it with the proper locking.
This is part two of the corruption fixed by cbd60aa7cd. I should have
done this in the first place, but convinced myself the optimizations were
safe. A 12 hour run of dbench 2048 will eventually trigger a list debug
WARN_ON for the list_del_init() in btrfs_sync_log().
Fixes: d1433debe7
Reported-by: Dave Jones <davej@codemonkey.org.uk>
cc: stable@vger.kernel.org # 3.15+
Signed-off-by: Chris Mason <clm@fb.com>
This issue was found when testing in-band dedupe enospc behaviour,
sometimes run_one_delayed_ref() may fail for enospc reason, then
__btrfs_run_delayed_refs（）will return, but forget to add num_heads_read
back, which will trigger "WARN_ON(delayed_refs->num_heads_ready == 0)" in
btrfs_select_ref_head().
Signed-off-by: Wang Xiaoguang <wangxg.fnst@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We cast 0 to a u8 but then because of type promotion, it's immediately
cast to int back to int before we do a bitwise negate. The cast doesn't
matter in this case, the code works as intended. It causes a static
checker warning though so let's remove it.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In btrfs_truncate_inode_items()->btrfs_async_run_delayed_refs(), we
swap the arg2 and arg3 wrongly, fix this.
This bug just impacts asynchronous delayed refs handle when we truncate inodes.
In delayed_ref_async_start(), there is such codes:
trans = btrfs_join_transaction(async->root);
if (trans->transid > async->transid)
goto end;
ret = btrfs_run_delayed_refs(trans, async->root, async->count);
From this codes, we can see that this just influence whether can we handle
delayed refs or the number of delayed refs to handle, this may impact
performance, but will not result in missing delayed refs, all delayed refs will
be handled in btrfs_commit_transaction().
Signed-off-by: Wang Xiaoguang <wangxg.fnst@cn.fujitsu.com>
Reviewed-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Indeed this just make the behavior similar to xfs when process has
fatal signals pending, and it'll make fstests/generic/298 happy.
Signed-off-by: Wang Xiaoguang <wangxg.fnst@cn.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
While free'ing qgroup->reserved resources, we much check if
the page has not been invalidated by a truncate operation
by checking if the page is still dirty before reducing the
qgroup resources. Resources in such a case are free'd when
the entire extent is released by delayed_ref.
This fixes a double accounting while releasing resources
in case of truncating a file, reproduced by the following testcase.
SCRATCH_DEV=/dev/vdb
SCRATCH_MNT=/mnt
mkfs.btrfs -f $SCRATCH_DEV
mount -t btrfs $SCRATCH_DEV $SCRATCH_MNT
cd $SCRATCH_MNT
btrfs quota enable $SCRATCH_MNT
btrfs subvolume create a
btrfs qgroup limit 500m a $SCRATCH_MNT
sync
for c in {1..15}; do
dd if=/dev/zero bs=1M count=40 of=$SCRATCH_MNT/a/file;
done
sleep 10
sync
sleep 5
touch $SCRATCH_MNT/a/newfile
echo "Removing file"
rm $SCRATCH_MNT/a/file
Fixes: b9d0b38928 ("btrfs: Add handler for invalidate page")
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Reviewed-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
While updating btree, we try to push items between sibling
nodes/leaves in order to keep height as low as possible.
But we don't memset the original places with zero when
pushing items so that we could end up leaving stale content
in nodes/leaves. One may read the above stale content by
increasing btree blocks' @nritems.
One case I've come across is that in fs tree, a leaf has two
parent nodes, hence running balance ends up with processing
this leaf with two parent nodes, but it can only reach the
valid parent node through btrfs_search_slot, so it'd be like,
do_relocation
for P in all parent nodes of block A:
if !P->eb:
btrfs_search_slot(key); --> get path from P to A.
if lowest:
BUG_ON(A->bytenr != bytenr of A recorded in P);
btrfs_cow_block(P, A); --> change A's bytenr in P.
After btrfs_cow_block, P has the new bytenr of A, but with the
same @key, we get the same path again, and get panic by BUG_ON.
Note that this is only happening in a corrupted fs, for a
regular fs in which we have correct @nritems so that we won't
read stale content in any case.
Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Pull btrfs fixes from Chris Mason:
"Some fixes from Omar and Dave Sterba for our new free space tree.
This isn't heavily used yet, but as we move toward making it the new
default we wanted to nail down an endian bug"
* 'for-linus-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
btrfs: tests: uninline member definitions in free_space_extent
btrfs: tests: constify free space extent specs
Btrfs: expand free space tree sanity tests to catch endianness bug
Btrfs: fix extent buffer bitmap tests on big-endian systems
Btrfs: catch invalid free space trees
Btrfs: fix mount -o clear_cache,space_cache=v2
Btrfs: fix free space tree bitmaps on big-endian systems
Pull btrfs updates from Chris Mason:
"This is a big variety of fixes and cleanups.
Liu Bo continues to fixup fuzzer related problems, and some of Josef's
cleanups are prep for his bigger extent buffer changes (slated for
v4.10)"
* 'for-linus-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: (39 commits)
Revert "btrfs: let btrfs_delete_unused_bgs() to clean relocated bgs"
Btrfs: remove unnecessary btrfs_mark_buffer_dirty in split_leaf
Btrfs: don't BUG() during drop snapshot
btrfs: fix btrfs_no_printk stub helper
Btrfs: memset to avoid stale content in btree leaf
btrfs: parent_start initialization cleanup
btrfs: Remove already completed TODO comment
btrfs: Do not reassign count in btrfs_run_delayed_refs
btrfs: fix a possible umount deadlock
Btrfs: fix memory leak in do_walk_down
btrfs: btrfs_debug should consume fs_info when DEBUG is not defined
btrfs: convert send's verbose_printk to btrfs_debug
btrfs: convert pr_* to btrfs_* where possible
btrfs: convert printk(KERN_* to use pr_* calls
btrfs: unsplit printed strings
btrfs: clean the old superblocks before freeing the device
Btrfs: kill BUG_ON in run_delayed_tree_ref
Btrfs: don't leak reloc root nodes on error
btrfs: squash lines for simple wrapper functions
Btrfs: improve check_node to avoid reading corrupted nodes
...
Pull more vfs updates from Al Viro:
">rename2() work from Miklos + current_time() from Deepa"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fs: Replace current_fs_time() with current_time()
fs: Replace CURRENT_TIME_SEC with current_time() for inode timestamps
fs: Replace CURRENT_TIME with current_time() for inode timestamps
fs: proc: Delete inode time initializations in proc_alloc_inode()
vfs: Add current_time() api
vfs: add note about i_op->rename changes to porting
fs: rename "rename2" i_op to "rename"
vfs: remove unused i_op->rename
fs: make remaining filesystems use .rename2
libfs: support RENAME_NOREPLACE in simple_rename()
fs: support RENAME_NOREPLACE for local filesystems
ncpfs: fix unused variable warning
Pull vfs xattr updates from Al Viro:
"xattr stuff from Andreas
This completes the switch to xattr_handler ->get()/->set() from
->getxattr/->setxattr/->removexattr"
* 'work.xattr' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
vfs: Remove {get,set,remove}xattr inode operations
xattr: Stop calling {get,set,remove}xattr inode operations
vfs: Check for the IOP_XATTR flag in listxattr
xattr: Add __vfs_{get,set,remove}xattr helpers
libfs: Use IOP_XATTR flag for empty directory handling
vfs: Use IOP_XATTR flag for bad-inode handling
vfs: Add IOP_XATTR inode operations flag
vfs: Move xattr_resolve_name to the front of fs/xattr.c
ecryptfs: Switch to generic xattr handlers
sockfs: Get rid of getxattr iop
sockfs: getxattr: Fail with -EOPNOTSUPP for invalid attribute names
kernfs: Switch to generic xattr handlers
hfs: Switch to generic xattr handlers
jffs2: Remove jffs2_{get,set,remove}xattr macros
xattr: Remove unnecessary NULL attribute name check
This reverts commit 5d8eb6fe51.
When we remove devices, we free the device structures. Delaying
btfs_remove_chunk() ends up hitting a use-after-free on them.
Signed-off-by: Chris Mason <clm@fb.com>
Pull splice fixups from Al Viro:
"A couple of fixups for interaction of pipe-backed iov_iter with
O_DIRECT reads + constification of a couple of primitives in uio.h
missed by previous rounds.
Kudos to davej - his fuzzing has caught those bugs"
* 'work.splice_read' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
[btrfs] fix check_direct_IO() for non-iovec iterators
constify iov_iter_count() and iter_is_iovec()
fix ITER_PIPE interaction with direct_IO
Pull misc vfs updates from Al Viro:
"Assorted misc bits and pieces.
There are several single-topic branches left after this (rename2
series from Miklos, current_time series from Deepa Dinamani, xattr
series from Andreas, uaccess stuff from from me) and I'd prefer to
send those separately"
* 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (39 commits)
proc: switch auxv to use of __mem_open()
hpfs: support FIEMAP
cifs: get rid of unused arguments of CIFSSMBWrite()
posix_acl: uapi header split
posix_acl: xattr representation cleanups
fs/aio.c: eliminate redundant loads in put_aio_ring_file
fs/internal.h: add const to ns_dentry_operations declaration
compat: remove compat_printk()
fs/buffer.c: make __getblk_slow() static
proc: unsigned file descriptors
fs/file: more unsigned file descriptors
fs: compat: remove redundant check of nr_segs
cachefiles: Fix attempt to read i_blocks after deleting file [ver #2]
cifs: don't use memcpy() to copy struct iov_iter
get rid of separate multipage fault-in primitives
fs: Avoid premature clearing of capabilities
fs: Give dentry to inode_change_ok() instead of inode
fuse: Propagate dentry down to inode_change_ok()
ceph: Propagate dentry down to inode_change_ok()
xfs: Propagate dentry down to inode_change_ok()
...
looking for duplicate ->iov_base makes sense only for
iovec-backed iterators; for kvec-backed ones it's pointless,
for bvec-backed ones it's pointless and broken on 32bit (we
walk through an array of struct bio_vec accessing them as if
they were struct iovec; works by accident on 64bit, but on
32bit it'll blow up) and for pipe-backed ones it's pointless
and ends up oopsing.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
These inode operations are no longer used; remove them.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Pull block layer updates from Jens Axboe:
"This is the main pull request for block layer changes in 4.9.
As mentioned at the last merge window, I've changed things up and now
do just one branch for core block layer changes, and driver changes.
This avoids dependencies between the two branches. Outside of this
main pull request, there are two topical branches coming as well.
This pull request contains:
- A set of fixes, and a conversion to blk-mq, of nbd. From Josef.
- Set of fixes and updates for lightnvm from Matias, Simon, and Arnd.
Followup dependency fix from Geert.
- General fixes from Bart, Baoyou, Guoqing, and Linus W.
- CFQ async write starvation fix from Glauber.
- Add supprot for delayed kick of the requeue list, from Mike.
- Pull out the scalable bitmap code from blk-mq-tag.c and make it
generally available under the name of sbitmap. Only blk-mq-tag uses
it for now, but the blk-mq scheduling bits will use it as well.
From Omar.
- bdev thaw error progagation from Pierre.
- Improve the blk polling statistics, and allow the user to clear
them. From Stephen.
- Set of minor cleanups from Christoph in block/blk-mq.
- Set of cleanups and optimizations from me for block/blk-mq.
- Various nvme/nvmet/nvmeof fixes from the various folks"
* 'for-4.9/block' of git://git.kernel.dk/linux-block: (54 commits)
fs/block_dev.c: return the right error in thaw_bdev()
nvme: Pass pointers, not dma addresses, to nvme_get/set_features()
nvme/scsi: Remove power management support
nvmet: Make dsm number of ranges zero based
nvmet: Use direct IO for writes
admin-cmd: Added smart-log command support.
nvme-fabrics: Add host_traddr options field to host infrastructure
nvme-fabrics: revise host transport option descriptions
nvme-fabrics: rework nvmf_get_address() for variable options
nbd: use BLK_MQ_F_BLOCKING
blkcg: Annotate blkg_hint correctly
cfq: fix starvation of asynchronous writes
blk-mq: add flag for drivers wanting blocking ->queue_rq()
blk-mq: remove non-blocking pass in blk_mq_map_request
blk-mq: get rid of manual run of queue with __blk_mq_run_hw_queue()
block: export bio_free_pages to other modules
lightnvm: propagate device_add() error code
lightnvm: expose device geometry through sysfs
lightnvm: control life of nvm_dev in driver
blk-mq: register device instead of disk
...
The free space tree format conversion functions were broken on
big-endian systems, but the sanity tests didn't catch it because all of
the operations were aligned to multiple words. This was meant to catch
any bugs in the extent buffer code's handling of high memory, but it
ended up hiding the endianness bug. Expand the tests to do both
sector-aligned and page-aligned operations.
Tested-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The in-memory bitmap code manipulates words and is therefore sensitive
to endianness, while the extent buffer bitmap code addresses bytes and
is byte-order agnostic. Because the byte addressing of the extent buffer
bitmaps is equivalent to a little-endian in-memory bitmap, the extent
buffer bitmap tests fail on big-endian systems.
34b3e6c92a ("Btrfs: self-tests: Fix extent buffer bitmap test fail on
BE system") worked around another endianness bug in the tests but missed
this one because ed9e4afdb0 ("Btrfs: self-tests: Execute page
straddling test only when nodesize < PAGE_SIZE") disables this part of
the test on ppc64. That change lost the original meaning of the test,
however. We really want to test that an equivalent series of operations
using the in-memory bitmap API and the extent buffer bitmap API produces
equivalent results.
To fix this, don't use memcmp_extent_buffer() or write_extent_buffer();
do everything bit-by-bit.
Reported-by: Anatoly Pugachev <matorola@gmail.com>
Tested-by: Anatoly Pugachev <matorola@gmail.com>
Tested-by: Feifei Xu <xufeifei@linux.vnet.ibm.com>
Tested-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There are two separate issues that can lead to corrupted free space
trees.
1. The free space tree bitmaps had an endianness issue on big-endian
systems which is fixed by an earlier patch in this series.
2. btrfs-progs before v4.7.3 modified filesystems without updating the
free space tree.
To catch both of these issues at once, we need to force the free space
tree to be rebuilt. To do so, add a FREE_SPACE_TREE_VALID compat_ro bit.
If the bit isn't set, we know that it was either produced by a broken
big-endian kernel or may have been corrupted by btrfs-progs.
This also provides us with a way to add rudimentary read-write support
for the free space tree to btrfs-progs: it can just clear this bit and
have the kernel rebuild the free space tree.
Cc: stable@vger.kernel.org # 4.5+
Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Tested-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We moved the code for creating the free space tree the first time that
it's enabled, but didn't move the clearing code along with it. This
breaks my (undocumented) intention that `mount -o
clear_cache,space_cache=v2` would clear the free space tree and then
recreate it.
Fixes: 511711af91 ("btrfs: don't run delayed references while we are creating the free space tree")
Cc: stable@vger.kernel.org # 4.5+
Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Tested-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In convert_free_space_to_{bitmaps,extents}(), we buffer the free space
bitmaps in memory and copy them directly to/from the extent buffers with
{read,write}_extent_buffer(). The extent buffer bitmap helpers use byte
granularity, which is equivalent to a little-endian bitmap. This means
that on big-endian systems, the in-memory bitmaps will be written to
disk byte-swapped. To fix this, use byte-granularity for the bitmaps in
memory.
Fixes: a5ed918285 ("Btrfs: implement the free space B-tree")
Cc: stable@vger.kernel.org # 4.5+
Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Tested-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Remove the unnecessary typedefs and the zero-length a_entries array in
struct posix_acl_xattr_header.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
current_fs_time() uses struct super_block* as an argument.
As per Linus's suggestion, this is changed to take struct
inode* as a parameter instead. This is because the function
is primarily meant for vfs inode timestamps.
Also the function was renamed as per Arnd's suggestion.
Change all calls to current_fs_time() to use the new
current_time() function instead. current_fs_time() will be
deleted.
Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
When we're not able to get enough space through splitting leaf,
we'd create a new sibling leaf instead, and it's possible that we return
a zero-nritem sibling leaf and mark it dirty before it's in a consistent
state. With CONFIG_BTRFS_FS_CHECK_INTEGRITY=y, the integrity check of
check_leaf will report panic due to this zero-nritem non-root leaf.
This removes the unnecessary btrfs_mark_buffer_dirty.
Reported-by: Filipe Manana <fdmanana@gmail.com>
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Really there's lots of things that can go wrong here, kill all the
BUG_ON()'s and replace the logic ones with ASSERT()'s and return EIO
instead.
Signed-off-by: Josef Bacik <jbacik@fb.com>
[ switched to btrfs_err, errors go to common label ]
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The addition of btrfs_no_printk() caused a build failure when
CONFIG_PRINTK is disabled:
fs/btrfs/send.c: In function 'send_rename':
fs/btrfs/ctree.h:3367:2: error: implicit declaration of function 'btrfs_no_printk' [-Werror=implicit-function-declaration]
This moves the helper outside of that #ifdef so it is always
defined, and changes the existing #ifdef to refer to that
helper as well for consistency.
Fixes: 47c57058ff2c ("btrfs: btrfs_debug should consume fs_info when DEBUG is not defined")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This is an additional patch to
"Btrfs: memset to avoid stale content in btree node block".
This uses memset to initialize the unused space in a leaf to avoid
potential stale content, which may be incurred by pushing items
between sibling leaves.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Code cleanup. parent_start is initialized multiple times when it is
not necessary to do so.
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Code cleanup. count is already (unsgined long)-1. That is the reason
run_all was set. Do not reassign it (unsigned long)-1.
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The extent buffer 'next' needs to be free'd conditionally.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We can hit unused variable warnings when btrfs_debug and friends are
just aliases for no_printk. This is due to the fs_info not getting
consumed by the function call, which can happen if convenenience
variables are used. This patch adds a new btrfs_no_printk static inline
that consumes the convenience variable and does nothing else. It
silences the unused variable warning and has no impact on the generated
code:
$ size fs/btrfs/extent_io.o*
text data bss dec hex filename
44072 152 32 44256 ace0 fs/btrfs/extent_io.o.btrfs_no_printk
44072 152 32 44256 ace0 fs/btrfs/extent_io.o.no_printk
Fixes: 27a0dd61a5 (Btrfs: make btrfs_debug match pr_debug handling related to DEBUG)
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This was basically an open-coded, less flexible dynamic printk. We can
just use btrfs_debug instead.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
For many printks, we want to know which file system issued the message.
This patch converts most pr_* calls to use the btrfs_* versions instead.
In some cases, this means adding plumbing to allow call sites access to
an fs_info pointer.
fs/btrfs/check-integrity.c is left alone for another day.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This patch converts printk(KERN_* style messages to use the pr_* versions.
One side effect is that anything that was KERN_DEBUG is now automatically
a dynamic debug message.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
CodingStyle chapter 2:
"[...] never break user-visible strings such as printk messages,
because that breaks the ability to grep for them."
This patch unsplits user-visible strings.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_rm_device frees the block device but then re-opens it using
the saved device name. A race exists between the close and the
re-open that allows the block size to be changed. The result
is getting stuck forever in the reclaim loop in __getblk_slow.
This patch moves the superblock cleanup before closing the block
device, which is also consistent with other callers. We also don't
need a private copy of dev_name as the whole routine operates under
the uuid_mutex.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In a corrupted btrfs image, we can come across this BUG_ON and
get an unreponsive system, but if we return errors instead,
its caller can handle everything gracefully by aborting the current
transaction.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We don't track the reloc roots in any sort of normal way, so the only way the
root/commit_root nodes get free'd is if the relocation finishes successfully and
the reloc root is deleted. Fix this by free'ing them in free_reloc_roots.
Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We need to check items in a node to make sure that we're reading
a valid one, otherwise we could get various crashes while processing
delayed_refs.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Somehow we missed btrfs_print_tree when last time we
updated error handling for read_extent_block().
This keeps us from getting a NULL pointer panic when
btrfs_print_tree's read_extent_block() fails.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
