This patch unifies the error messages:
- have a "." and the end of each message
- write controller with a small "c", if not the first word of an error
message.
Link: https://lore.kernel.org/r/20210128104644.2982125-6-mkl@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
The published errata specify the maximum allowed SPI frequency to be
max 85% of (FSYSCLK/2). So there's no need to track known bad clock
settings in the driver. As the setup of known good values is a bit
tricky, keep them.
Link: https://lore.kernel.org/r/20210128104644.2982125-4-mkl@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
This patch fixes the reference to the errata for both the mcp2517fd
and the mcp2518fd.
Fixes: f5b84dedf7 ("can: mcp25xxfd: mcp25xxfd_probe(): add SPI clk limit related errata information")
Link: https://lore.kernel.org/r/20210128104644.2982125-2-mkl@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Petr Machata says:
====================
nexthop: Preparations for resilient next-hop groups
At this moment, there is only one type of next-hop group: an mpath group.
Mpath groups implement the hash-threshold algorithm, described in RFC
2992[1].
To select a next hop, hash-threshold algorithm first assigns a range of
hashes to each next hop in the group, and then selects the next hop by
comparing the SKB hash with the individual ranges. When a next hop is
removed from the group, the ranges are recomputed, which leads to
reassignment of parts of hash space from one next hop to another. RFC 2992
illustrates it thus:
+-------+-------+-------+-------+-------+
| 1 | 2 | 3 | 4 | 5 |
+-------+-+-----+---+---+-----+-+-------+
| 1 | 2 | 4 | 5 |
+---------+---------+---------+---------+
Before and after deletion of next hop 3
under the hash-threshold algorithm.
Note how next hop 2 gave up part of the hash space in favor of next hop 1,
and 4 in favor of 5. While there will usually be some overlap between the
previous and the new distribution, some traffic flows change the next hop
that they resolve to.
If a multipath group is used for load-balancing between multiple servers,
this hash space reassignment causes an issue that packets from a single
flow suddenly end up arriving at a server that does not expect them, which
may lead to TCP reset.
If a multipath group is used for load-balancing among available paths to
the same server, the issue is that different latencies and reordering along
the way causes the packets to arrive in wrong order.
Resilient hashing is a technique to address the above problem. Resilient
next-hop group has another layer of indirection between the group itself
and its constituent next hops: a hash table. The selection algorithm uses a
straightforward modulo operation to choose a hash bucket, and then reads
the next hop that this bucket contains, and forwards traffic there.
This indirection brings an important feature. In the hash-threshold
algorithm, the range of hashes associated with a next hop must be
continuous. With a hash table, mapping between the hash table buckets and
the individual next hops is arbitrary. Therefore when a next hop is deleted
the buckets that held it are simply reassigned to other next hops:
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
|1|1|1|1|2|2|2|2|3|3|3|3|4|4|4|4|5|5|5|5|
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
v v v v
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
|1|1|1|1|2|2|2|2|1|2|4|5|4|4|4|4|5|5|5|5|
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
Before and after deletion of next hop 3
under the resilient hashing algorithm.
When weights of next hops in a group are altered, it may be possible to
choose a subset of buckets that are currently not used for forwarding
traffic, and use those to satisfy the new next-hop distribution demands,
keeping the "busy" buckets intact. This way, established flows are ideally
kept being forwarded to the same endpoints through the same paths as before
the next-hop group change.
This patchset prepares the next-hop code for eventual introduction of
resilient hashing groups.
- Patches #1-#4 carry otherwise disjoint changes that just remove certain
assumptions in the next-hop code.
- Patches #5-#6 extend the in-kernel next-hop notifiers to support more
next-hop group types.
- Patches #7-#12 refactor RTNL message handlers. Resilient next-hop groups
will introduce a new logical object, a hash table bucket. It turns out
that handling bucket-related messages is similar to how next-hop messages
are handled. These patches extract the commonalities into reusable
components.
The plan is to contribute approximately the following patchsets:
1) Nexthop policy refactoring (already pushed)
2) Preparations for resilient next hop groups (this patchset)
3) Implementation of resilient next hop group
4) Netdevsim offload plus a suite of selftests
5) Preparations for mlxsw offload of resilient next-hop groups
6) mlxsw offload including selftests
Interested parties can look at the current state of the code at [2] and
[3].
[1] https://tools.ietf.org/html/rfc2992
[2] https://github.com/idosch/linux/commits/submit/res_integ_v1
[3] https://github.com/idosch/iproute2/commits/submit/res_v1
====================
Link: https://lore.kernel.org/r/cover.1611836479.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Validation of messages for get / del of a next hop is the same as will be
validation of messages for get of a resilient next hop group bucket. The
difference is that policy for resilient next hop group buckets is a
superset of that used for next-hop get.
It is therefore possible to reuse the code that validates the nhmsg fields,
extracts the next-hop ID, and validates that. To that end, extract from
nh_valid_get_del_req() a helper __nh_valid_get_del_req() that does just
that.
Make the nlh argument const so that the function can be called from the
dump context, which only has a const nlh. Propagate the constness to
nh_valid_get_del_req().
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In order to allow different handling for next-hop tree dumper and for
bucket dumper, parameterize the next-hop tree walker with a callback. Add
rtm_dump_nexthop_cb() with just the bits relevant for next-hop tree
dumping.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Extract from rtm_dump_nexthop() a helper to walk the next hop tree. A
separate function for this will be reusable from the bucket dumper.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The dump operations need to keep state from one invocation to another. A
scratch area is dedicated for this purpose in the passed-in argument, cb,
namely via two aliased arrays, struct netlink_callback.args and .ctx.
Dumping of buckets will end up having to iterate over next hops as well,
and it would be nice to be able to reuse the iteration logic with the NH
dumper. The fact that the logic currently relies on fixed index to the
.args array, and the indices would have to be coordinated between the two
dumpers, makes this somewhat awkward.
To make the access patters clearer, introduce a helper struct with a NH
index, and instead of using the .args array directly, use it through this
structure.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Requests to dump nexthops have many attributes in common with those that
requests to dump buckets of resilient NH groups will have. However, they
have different policies. To allow reuse of this code, extract a
policy-agnostic wrapper out of nh_valid_dump_req(), and convert this
function into a thin wrapper around it.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Requests to dump nexthops have many attributes in common with those that
requests to dump buckets of resilient NH groups will have. In order to make
reuse of this code simpler, convert the code to use a single structure with
filtering configuration instead of passing around the parameters one by
one.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
After there are several next-hop group types, initialization and
finalization of notifier type needs to reflect the actual type. Transform
nh_notifier_grp_info_init() and _fini() to make extending them easier.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently there are only two types of in-kernel nexthop notification.
The two are distinguished by the 'is_grp' boolean field in 'struct
nh_notifier_info'.
As more notification types are introduced for more next-hop group types, a
boolean is not an easily extensible interface. Instead, convert it to an
enum.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Most of the code that deals with nexthop groups relies on the fact that the
group is of exactly one well-known type. Currently there is only one type,
"mpath", but as more next-hop group types come, it becomes desirable to
have a central place where the setting is validated. Introduce such place
into nexthop_create_group(), such that the check is done before the code
that relies on that invariant is invoked.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The values that a next-hop group needs to keep track of depend on the group
type. Introduce a union to separate fields specific to the mpath groups
from fields specific to other group types.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The logic for selecting path depends on the next-hop group type. Adapt the
nexthop_select_path() to dispatch according to the group type.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
nexthop_free_mpath really should be nexthop_free_group. Rename it.
Signed-off-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Julian Wiedmann says:
====================
net/iucv: updates 2021-01-28
This reworks & simplifies the TX notification path in af_iucv, so that we
can send out SG skbs over TRANS_HIPER sockets. Also remove a noisy
WARN_ONCE() in the RX path.
====================
Link: https://lore.kernel.org/r/20210128114108.39409-1-jwi@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The TX path no longer falls apart when some of its SG skbs are later
linearized by lower layers of the stack. So enable the use of SG skbs
in iucv_sock_sendmsg() again.
This effectively reverts
commit dc5367bcc5 ("net/af_iucv: don't use paged skbs for TX on HiperSockets").
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stop maintaining the skb_send_q list for TRANS_HIPER sockets.
Not only is it extra overhead, but keeping around a list of skb clones
means that we later also have to match the ->sk_txnotify() calls
against these clones and free them accordingly.
The current matching logic (comparing the skbs' shinfo location) is
frustratingly fragile, and breaks if the skb's head is mangled in any
sort of way while passing from dev_queue_xmit() to the device's
HW queue.
Also adjust the interface for ->sk_txnotify(), to make clear that we
don't actually care about any skb internals.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The TX code keeps track of all skbs that are in-flight but haven't
actually been sent out yet. For native IUCV sockets that's not a huge
deal, but with TRANS_HIPER sockets it would be much better if we
didn't need to maintain a list of skb clones.
Note that we actually only care about the _count_ of skbs in this stage
of the TX pipeline. So as prep work for removing the skb tracking on
TRANS_HIPER sockets, keep track of the skb count in a separate variable
and pair any list {enqueue, unlink} with a count {increment, decrement}.
Then replace all occurences where we currently look at the skb list's
fill level.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Whoever called iucv_sk(sk)->sk_txnotify() must already know that they're
dealing with an af_iucv socket.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When do_qdio() returns with an unexpected error, qeth_flush_buffers()
kicks off a recovery action.
In such a case there's no point in starting TX completion processing,
the device gets torn down anyway. So take a closer look at do_qdio()'s
return value, and skip the TX completion processing accordingly.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As part of the TX queue selection for af_iucv skbs,
qeth_l3_get_cast_type_rcu() ends up calling qeth_get_ether_cast_type().
Which is rather fragile, since such skbs don't have a proper ETH header
and we rely on it being zeroed out in the right places. Add a separate
case for ETH_P_AF_IUCV instead that does the right thing.
When later building the HW header for such skbs, don't hard-code the
cast type but follow the same path as for other protocol types. Here
the cast type should naturally come from the skb's queue mapping.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
qeth_l3_hard_start_xmit() already determined the skb's proto. Avoid
doing so a second time when it calls qeth_l3_get_cast_type().
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Replace our home-grown helper with the more robust vlan_get_protocol().
This is pretty much a 1:1 replacement, we just need to pass around a
proper ETH_P_* everyhwere and convert the old value range.
For readability also convert the protocol checks in
qeth_l3_hard_start_xmit() to a switch statement.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We have two usage patterns:
1. get & ->setup() a new discipline, or
2. ->remove() & put the currently loaded one.
Add corresponding helpers that hide the internals & error handling.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Alex Elder says:
====================
net: ipa: hardware pipeline cleanup fixes
There is a procedure currently referred to as a "tag process" that
is performed to clear the IPA hardware pipeline--either at the time
of a modem crash, or when suspending modem GSI channels.
One thing done in this procedure is issuing a command that sends a
data packet originating from the AP->command TX endpoint, destined
for the AP<-LAN RX (default) endpoint. And although we currently
wait for the send to complete, we do *not* wait for the packet to be
received. But the pipeline can't be assumed clear until we have
actually received this packet.
This series addresses this by detecting when the pipeline-clearing
packet has been received, and using a completion to allow a waiter
to know when that has happened. This uses the IPA status capability
(which sends an extra status buffer for certain packets). It also
uses the ability to supply a "tag" with a packet, which will be
delivered with the packet's status buffer. We tag the data packet
that's sent to clear the pipeline, and use the receipt of a status
buffer associated with a tagged packet to determine when that packet
has arrived.
"Tag status" just desribes one aspect of this procedure, so some
symbols are renamed to be more like "pipeline clear" so they better
describe the larger purpose. Finally, two functions used in this
code don't use their arguments, so those arguments are removed.
====================
Link: https://lore.kernel.org/r/20210126185703.29087-1-elder@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The only time we transfer data (rather than issuing a command) out
of the AP->command TX endpoint is when we're clearing the hardware
pipeline. All that's needed is a "small" data buffer, and its
contents aren't even important.
For convenience, we just transfer a command structure in this case
(it's already mapped for DMA). The TRE is added to a transaction
using ipa_cmd_ip_tag_status_add(), but we ignore the size value
provided to that function. So just get rid of the size argument.
Signed-off-by: Alex Elder <elder@linaro.org>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We only send a tagged packet from the AP->command TX endpoint when
we're clearing the hardware pipeline. And when we receive the
tagged packet we don't care what the actual tag value is.
Stop passing a tag value to ipa_cmd_ip_tag_status_add(), and just
encode 0 as the tag sent. Fix the function that encodes the tag so
it uses the proper byte ordering.
Signed-off-by: Alex Elder <elder@linaro.org>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There are times, such as when the modem crashes, when we issue
commands to clear the IPA hardware pipeline. These commands include
a data transfer command that delivers a small packet directly to the
default (AP<-LAN RX) endpoint.
The places that do this wait for the transactions that contain these
commands to complete, but the pipeline can't be assumed clear until
the sent packet has been *received*.
The small transfer will be delivered with a status structure, and
that status will indicate its tag is valid. This is the only place
we send a tagged packet, so we use the tag to determine when the
pipeline clear packet has arrived.
Add a completion to the IPA structure to to be used to signal
the receipt of a pipeline clear packet. Create a new function
ipa_cmd_pipeline_clear_wait() that will wait for that completion.
Reinitialize the completion whenever pipeline clear commands are
added to a transaction. Extend ipa_endpoint_status_tag() to check
whether a packet whose status contains a valid tag was sent from the
AP->command TX endpoint, and if so, signal the new IPA completion.
Have all callers of ipa_cmd_pipeline_clear_add() wait for the
pipeline clear indication after the transaction that clears the
pipeline has completed.
Signed-off-by: Alex Elder <elder@linaro.org>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Introduce ipa_endpoint_status_tag(), which returns true if received
status indicates its tag field is valid. The endpoint parameter is
not yet used.
Call this from ipa_status_drop_packet(), and drop the packet if the
status indicates the tag was valid. Pass the endpoint pointer to
ipa_status_drop_packet(), and rename it ipa_endpoint_status_drop().
The endpoint will be used in the next patch.
Signed-off-by: Alex Elder <elder@linaro.org>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Rearrange some comments and assignments made when handling a packet
that is received with status, aiming to improve understandability.
Use DIV_ROUND_CLOSEST() to get a better per-packet true size estimate.
Signed-off-by: Alex Elder <elder@linaro.org>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There is a set of functions and symbols related to performing
"tag_process" immediate commands to clear the IPA pipeline. The
name is related to one of the commands issued when doing this, but
it doesn't really convey the overall purpose of taking this action.
The purpose is to take some steps to "clear out" the hardware
pipeline, and to wait until that process completes, to ensure the
IPA hardware is in a well-defined state.
Rename these symbols to use "pipeline_clear" in their names instead.
Add some comments to explain a bit more about what's going on.
Signed-off-by: Alex Elder <elder@linaro.org>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The current layout of net_device is not optimal for cacheline usage.
The member adj_list.lower linked list is split between cacheline 2 and 3.
The ifindex is placed together with stats (struct net_device_stats),
although most modern drivers don't update this stats member.
The members netdev_ops, mtu and hard_header_len are placed on three
different cachelines. These members are accessed for XDP redirect into
devmap, which were noticeably with perf tool. When not using the map
redirect variant (like TC-BPF does), then ifindex is also used, which is
placed on a separate fourth cacheline. These members are also accessed
during forwarding with regular network stack. The members priv_flags and
flags are on fast-path for network stack transmit path in __dev_queue_xmit
(currently located together with mtu cacheline).
This patch creates a read mostly cacheline, with the purpose of keeping the
above mentioned members on the same cacheline.
Some netdev_features_t members also becomes part of this cacheline, which is
on purpose, as function netif_skb_features() is on fast-path via
validate_xmit_skb().
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Link: https://lore.kernel.org/r/161168277983.410784.12401225493601624417.stgit@firesoul
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
TX/RX descriptor ring fields are always little-endian, but conversion
wasn't performed for big-endian CPUs, so the driver failed to work.
This patch makes the driver work on big-endian CPUs. It was tested and
confirmed to work on NXP P1010 processor (PowerPC).
Signed-off-by: Alexey Denisov <rtgbnm@gmail.com>
Link: https://lore.kernel.org/r/20210128044859.280219-1-rtgbnm@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pass through mode is to allow packets in MAP format to be passed
on to the stack. rmnet driver can be used to process and demultiplex
these packets.
Pass through mode can be enabled when the device is in raw ip mode only.
Conversely, raw ip mode cannot be disabled when pass through mode is
enabled.
Userspace can use pass through mode in conjunction with rmnet driver
through the following steps-
1. Enable raw ip mode on qmi_wwan device
2. Enable pass through mode on qmi_wwan device
3. Create a rmnet device with qmi_wwan device as real device using netlink
Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Acked-by: Bjørn Mork <bjorn@mork.no>
Link: https://lore.kernel.org/r/1611560015-20034-1-git-send-email-subashab@codeaurora.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Daniele Palmas says:
====================
net: usb: qmi_wwan: new mux_id sysfs file
this patch series add a sysfs file to let userspace know which mux
id has been used to create a qmimux network interface.
I'm aware that adding new sysfs files is not usually the right path,
but my understanding is that this piece of information can't be
retrieved in any other way and its absence restricts how
userspace application (e.g. like libqmi) can take advantage of the
qmimux implementation in qmi_wwan.
====================
Link: https://lore.kernel.org/r/20210127153433.12237-1-dnlplm@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add qmimux interface sysfs file qmap/mux_id to show qmap id set
during the interface creation, in order to provide a method for
userspace to associate QMI control channels to network interfaces.
Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
Acked-by: Bjørn Mork <bjorn@mork.no>
Acked-by: Aleksander Morgado <aleksander@aleksander.es>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This change fixes the checkpatch warning described in this commit
commit cbacb5ab0a ("docs: printk-formats: Stop encouraging use of
unnecessary %h[xudi] and %hh[xudi]")
Standard integer promotion is already done and %hx and %hhx is useless
so do not encourage the use of %hh[xudi] or %h[xudi].
Cleanup output to use __func__ over explicit function strings.
Signed-off-by: Tom Rix <trix@redhat.com>
Link: https://lore.kernel.org/r/20210124190804.1964580-1-trix@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
drivers/net/can/dev.c
b552766c87 ("can: dev: prevent potential information leak in can_fill_info()")
3e77f70e73 ("can: dev: move driver related infrastructure into separate subdir")
0a042c6ec9 ("can: dev: move netlink related code into seperate file")
Code move.
drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c
57ac4a31c4 ("net/mlx5e: Correctly handle changing the number of queues when the interface is down")
214baf2287 ("net/mlx5e: Support HTB offload")
Adjacent code changes
net/switchdev/switchdev.c
20776b465c ("net: switchdev: don't set port_obj_info->handled true when -EOPNOTSUPP")
ffb68fc58e ("net: switchdev: remove the transaction structure from port object notifiers")
bae33f2b5a ("net: switchdev: remove the transaction structure from port attributes")
Transaction parameter gets dropped otherwise keep the fix.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
