SoC related changes for omaps including hwmod clean-up for
DSS, and hwmod data for more UARTs and ADC. Also few defconfig
changes to enable devices found on am335x and am437x.
[arnd: I removed the defconfig changes from the branch in order
to cherry-pick them onto the next/defconfig branch, but I did
not change the other commits]
* commit '29c4ce17bcad':
ARM: dts: cm-t3x30: add keypad support
ARM: OMAP2+: hwmod: AM43x: add hwmod support for ADC on AM43xx
ARM: DRA7: hwmod data: Add missing UART hwmod data
ARM: dts: omap4.dtsi: remove dss_fck
ARM: OMAP4: fix RFBI iclk
ARM: OMAP4: hwmod: use MODULEMODE properly
ARM: OMAP4: hwmod: set DSS submodule parent hwmods
ARM: OMAP5: hwmod: set DSS submodule parent hwmods
ARM: OMAP2+: hwmod: add parent_hwmod support
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- exynos3250
: add PMU support
- PMU refactoring
: move restart code into PMU driver
: move restart code for exynos440 into clk driver
- use u8 for val[] in struct exynos_pmu_conf
Note that this branch is based on tags/samsung-exynos-v3.19
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=bi8c
-----END PGP SIGNATURE-----
Merge tag 'samsung-pm-3' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/soc
Pull "Samsung PM 3rd updates for v3.19" from Kukjin Kim:
- exynos3250
: add PMU support
- PMU refactoring
: move restart code into PMU driver
: move restart code for exynos440 into clk driver
- use u8 for val[] in struct exynos_pmu_conf
Note that this branch is based on tags/samsung-exynos-v3.19
* tag 'samsung-pm-3' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
ARM: EXYNOS: use u8 for val[] in struct exynos_pmu_conf
ARM: EXYNOS: move restart code into pmu driver
clk: exynos5440: move restart code into clock driver
ARM: EXYNOS: add exynos3250 PMU support
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- add SOC_EXYNOS4415 config to be used in audio driver
- add support platform driver for exynos PMU
- move PMU specific definitions from common.h to exynos-pmu.h
- for exynos5420, add support PMU and Suspend-to-RAM
use MCPM call backs and call regulator core suspend prepare
and finish functions
NOTE:
including v3.19-next/non-critical-fixes, v3.19-next/cleanup-samsung
and v3.19-next/pm-samsung-2 branches
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=FzS8
-----END PGP SIGNATURE-----
Merge tag 'samsung-exynos-v3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/soc
Pull "Samsung exynos updates in arch/arm/mach-exynos/ for v3.19" from Kukjin Kim:
- add SOC_EXYNOS4415 config to be used in audio driver
- add support platform driver for exynos PMU
- move PMU specific definitions from common.h to exynos-pmu.h
- for exynos5420, add support PMU and Suspend-to-RAM
use MCPM call backs and call regulator core suspend prepare
and finish functions
NOTE:
including v3.19-next/non-critical-fixes, v3.19-next/cleanup-samsung
and v3.19-next/pm-samsung-2 branches
* tag 'samsung-exynos-v3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
ARM: EXYNOS: Call regulator core suspend prepare and finish functions
ARM: EXYNOS: Use MCPM call-backs to support S2R on exynos5420
ARM: EXYNOS: Add Suspend-to-RAM support for exynos5420
ARM: EXYNOS: Add PMU support for exynos5420
ARM: EXYNOS: Move PMU specific definitions from common.h
ARM: EXYNOS: Add platform driver support for Exynos PMU
ARM: EXYNOS: Add support for exynos4415 SoC
ARM: EXYNOS: fix typo in static struct name "exynos5_list_diable_wfi_wfe"
ARM: EXYNOS: Fix CPU idle clock down after CPU off
ARM: EXYNOS: Remove unneeded __ref annotation for cpu_die function
ARM: EXYNOS: Move code from hotplug.c to platsmp.c
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Values stored in val[] are never bigger than a byte.
text data bss dec hex filename
7716 3692 8 11416 2c98 arch/arm/mach-exynos/pmu.o.before
5436 1908 8 7352 1cb8 arch/arm/mach-exynos/pmu.o.after
Cc: Pankaj Dubey <pankaj.dubey@samsung.com>
Cc: Amit Daniel Kachhap <amit.daniel@samsung.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Let's register restart handler from PMU driver for restart
functionality. So that we can remove restart hooks from
machine specific file, and thus moving ahead when PMU moved
to driver folder, this functionality can be reused for ARM64
based Exynos SoC's.
Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Vivek Gautam <gautam.vivek@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Let's register restart handler for Exynos5440 from it's clock driver
for restart functionality. So that we can cleanup restart hooks from
machine specific file.
CC: Sylwester Nawrocki <s.nawrocki@samsung.com>
CC: Tomasz Figa <tomasz.figa@gmail.com>
Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
- OMAP4/5: DSS hwmod cleanup patches from Tomi Valkeinen.
- DRA7xx: hwmod data support for UARTs 7 through 10.
- AM43xx: hwmod data support for the onboard ADC.
Basic build, boot, and PM test reports are here:
http://www.pwsan.com/omap/testlogs/omap-b-for-v3.19/20141121110550/
Note that I cannot test the DRA7xx or AM43xx patches, since I do not have
these boards.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=zeC6
-----END PGP SIGNATURE-----
Merge tag 'for-v3.19/omap-b2' of git://git.kernel.org/pub/scm/linux/kernel/git/pjw/omap-pending into omap-for-v3.19/soc
Several more OMAP patches targeted for v3.19. They include:
- OMAP4/5: DSS hwmod cleanup patches from Tomi Valkeinen.
- DRA7xx: hwmod data support for UARTs 7 through 10.
- AM43xx: hwmod data support for the onboard ADC.
Basic build, boot, and PM test reports are here:
http://www.pwsan.com/omap/testlogs/omap-b-for-v3.19/20141121110550/
Note that I cannot test the DRA7xx or AM43xx patches, since I do not have
these boards.
This patch adds hwmod support for ADC on AM43xx. Since clockdomain
and offsets of adc_tsc are different from AM33xx, ADC data has been
directly added to AM43xx hwmod file.
Signed-off-by: Vignesh R <vigneshr@ti.com>
[paul@pwsan.com: fixed spelling of "Anolog"; converted spaces to tabs]
Signed-off-by: Paul Walmsley <paul@pwsan.com>
The regulator framework has a set of helpers functions to be used when
the system is entering and leaving from suspend but these are not called
on Exynos platforms. This means that the .set_suspend_* function handlers
defined by regulator drivers are not called when the system is suspended.
Suggested-by: Doug Anderson <dianders@chromium.org>
Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Reviewed-by: Doug Anderson <dianders@chromium.org>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Use the MCPM layer to handle core suspend/resume on Exynos5420.
Also, restore the entry address setup code post-resume.
Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com>
Acked-by: Nicolas Pitre <nico@linaro.org>
Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Tested-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Adds initial PMU settings for exynos5420. This is required for
future S2R and Switching support.
Signed-off-by: Thomas Abraham <thomas.ab@samsung.com>
Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com>
Signed-off-by: Vikas Sajjan <vikas.sajjan@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
This patch moves PMU specific definitions into a new file
as exynos-pmu.h.
This will help in reducing dependency of common.h in pmu.c.
Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Tested-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
This patch modifies Exynos Power Management Unit (PMU) initialization
implementation in following way:
- Added platform driver support for Exynos PMU IP.
- Added platform struct exynos_pmu_data to hold platform specific data.
- For each SoC's PMU support now we can add platform data and statically
bind PMU configuration and SoC specific initialization function.
- Separate each SoC's PMU initialization function and make it as part of
platform data.
- It also removes uses of soc_is_exynosXYZ().
Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Tested-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
This patch adds support for Exynos4415 SoC. Exynos4415 is based on
the 32-bit RISC processor for Smartphone. Exynos4415 has Cortex A9
quad-cores and has a target speed of 1.6GHz and provides 8.5GB/s
memory bandwidth.
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
* Add early debugging support using SCIF(A)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=O/9v
-----END PGP SIGNATURE-----
Merge tag 'renesas-soc4-for-v3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/soc
Pull "Fourth Round of Renesas ARM Based SoC Updates for v3.19" from Simon Horman:
* Add early debugging support using SCIF(A)
* tag 'renesas-soc4-for-v3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
ARM: shmobile: Add early debugging support using SCIF(A)
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Do not select RESET_CONTROLLER as it is user selectable
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=M/Sw
-----END PGP SIGNATURE-----
Merge tag 'berlin-soc-3.19-2' of git://git.infradead.org/users/hesselba/linux-berlin into next/soc
Pull "Berlin SoC changes for v3.19 (round 2)" from Sebastian Hesselbarth:
- Do not select RESET_CONTROLLER as it is user selectable
* tag 'berlin-soc-3.19-2' of git://git.infradead.org/users/hesselba/linux-berlin:
ARM: berlin: do not select RESET_CONTROLLER
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This device actually has a 8250 serial with a shift of 0.
Tested this on a BCM4708.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This has mostly been about introducing A80 support
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=cJ5x
-----END PGP SIGNATURE-----
Merge tag 'sunxi-core-for-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into next/soc
Pull "Allwinner Core Additions for 3.19" from Maxime Ripard:
This has mostly been about introducing A80 support
* tag 'sunxi-core-for-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux:
ARM: sunxi: make sun6i SMP ops static
ARM: sunxi: Select ARCH_HAS_RESET_CONTROLLER and RESET_CONTROLLER for sun9i
Documentation: sunxi: Add A80 datasheet link
devicetree: bindings: Document supported Allwinner sunxi SoCs
ARM: sunxi: Introduce Allwinner A80 support
devicetree: bindings: Add vendor prefix for Merrii Technology Co., Ltd.
ARM: sunxi: Add debug uart used by sun9i (Allwinner A80)
Documentation: sunxi: Update Allwinner SoC documentation (A31/A31s/A23)
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Pull "ARM: meson: SOC related changes" from Carlo Caione:
This is the pull request for the SoC related changes for the 3.19.
The support for Meson8 is added together with L2 cache management.
* tag 'v3.19-meson-soc' of https://github.com/carlocaione/linux-meson:
clocksource: meson6: Select CLKSRC_MMIO
ARM: meson: enable L2 cache
ARM: meson: document meson8 compatible properties
ARM: meson: add meson8 support
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABCAAGBQJUa1NRAAoJEPOmecmc0R2BhycH/RSVMLZ8o5AWEwXEhDaf0Y/8
YnH0uW1wZazAsDtkOHvxBwIHX16E7tNoODZ5eT/OqMK55SSWuxaayOOx7uRx44va
qf3pV8S/Wh+gjUIwhAkvLd9kgoVHuJRS++WzG9YrcT89qUaLcmekXKukxA32eKwM
xjwZJsyYWVseL3UupTY+lMT4dtuaIfaxN6m2WtMWViKwQR8zHNC6fwySQbqGBwAe
X5eoWA6Tv0c1NXrHghjxL1uVj4htqPZhgRUne5BTgGay2D7uJFxNWvQ92ppK5DdD
4c6sH1y2/IXSZYnrCEYg0ARRyhZreZtVWW5ZvPTWHBr6WXOZe33fw6+MvO5hPGk=
=KyXS
-----END PGP SIGNATURE-----
Merge tag 'v3.19-rockchip-soc2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/soc
Pull "code part of the rk3288 smp support" from Heiko Stübner:
here is the second batch of soc related changes, consisting only
of the smp support for rk3288.
Due to the slight misheap of the v3.18 cpuclk pull being merge, it is based
on exactly this merge commit from Olof to next/soc.
* tag 'v3.19-rockchip-soc2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
ARM: rockchip: add basic smp support for rk3288
ARM: rockchip: add option to access the pmu via a phandle in smp_operations
ARM: rockchip: convert to regmap and use pmu syscon if available
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
top of the multiplatform patches, this moves out
some drivers and reduced the amount of code carried
in arch/arm/mach-integrator.
- Move the Integrator/AP timer to drivers/clocksource
- Move the restart functionality to the device tree,
patches to enable restart for the Integrator have
been merged to the reset tree (orthogonal)
- Move debug LEDs to device tree (using the syscon
LED driver merged for v3.18)
- Move core module LEDs to device tree (using the
syscon LED driver merged for v3.18)
- Move the SoC driver (chip ID etc) to
drivers/soc/versatile/soc-integrator.c
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=rplU
-----END PGP SIGNATURE-----
Merge tag 'integrator-v3.19-arm-soc-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator into next/soc
Pull "ARM SoC Integrator updates for v3.19" from Linus Walleij:
Integrator updates for the v3.19 merge cycle on
top of the multiplatform patches, this moves out
some drivers and reduced the amount of code carried
in arch/arm/mach-integrator.
- Move the Integrator/AP timer to drivers/clocksource
- Move the restart functionality to the device tree,
patches to enable restart for the Integrator have
been merged to the reset tree (orthogonal)
- Move debug LEDs to device tree (using the syscon
LED driver merged for v3.18)
- Move core module LEDs to device tree (using the
syscon LED driver merged for v3.18)
- Move the SoC driver (chip ID etc) to
drivers/soc/versatile/soc-integrator.c
* tag 'integrator-v3.19-arm-soc-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator:
soc: move SoC driver for the ARM Integrator
ARM: integrator: move core module LED to device tree
ARM: integrator: move debug LEDs to syscon LED driver
ARM: integrator: move restart to the device tree
ARM: integrator: move AP timer to clocksource
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Use WFI when putting CPU1 to sleep. Don't hold CPU1 in reset
since that results in increased power consumption.
Reset CPU1 briefly during CPU1 bootup.
This has been tested for hotplug and suspend/resume and results
in no increased power consumption.
Signed-off-by: Alan Tull <atull@opensource.altera.com>
Acked-by: Pavel Machek <pavel@denx.de>
Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=KhoS
-----END PGP SIGNATURE-----
Merge tag 'v3.19-next-soc' of https://github.com/mbgg/linux-mediatek into next/soc
Pull "Add earlyprintk to mt8127 and mt8135 and update Kconfig entry for
Mediatek SoCs" from Matthias Brugger:
Here comes the pull request which add earlyprintk support for mt8127 and mt8135.
Apart from that the Kconfig entry for the Mediatek architecture was fixed.
* tag 'v3.19-next-soc' of https://github.com/mbgg/linux-mediatek:
ARM: mediatek: Fix description for mediatek SoCs
ARM: mediatek: Add earlyprintk support for mt8127 & mt8135
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Pull "Broadcom Cygnus SoC defconfig" from Florian Fainelli:
This pull requests removes one level in menuconfig for the BCM SoCs for the
bcm_defconfig file.
* tag 'arm-soc/for-3.19/cygnus-defconfig-v2' of http://github.com/brcm/linux:
ARM: bcm_defconfig: remove one level of menu from Kconfig
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Pull "Broadcom Cygnus SoC platform support" from Florian Fainelli:
This pull request contains the platform code to support the Broadcom Cygnus SoC
using the iProc architecture:
- add support for the Broadcom Cygnus SoC
- consolidate the BCM5301X Kconfig options under the iProc menuconfig entry
- remove one level of menu in menuconfig
* tag 'arm-soc/for-3.19/cygnus-platform-v2' of http://github.com/brcm/linux:
ARM: mach-bcm: ARCH_BCM_MOBILE: remove one level of menu from Kconfig
ARM: mach-bcm: Consolidate currently supported IPROC SoCs
ARM: cygnus: Initial support for Broadcom Cygnus SoC
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
StrongARM debug-macro.S is quite standalone thing, depending only on
register mappings. Move it to proper place and add Kconfig entry.
Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Tero Kristo to move things a bit closer to becoming a proper
device driver.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=r4xr
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v3.19/prcm-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/soc
Pull "omap prcm clean-up for v3.19" from Tony Lindgren:
Clean-up series for omap PRCM (Power Reset Clock Module) from
Tero Kristo to move things a bit closer to becoming a proper
device driver.
* tag 'omap-for-v3.19/prcm-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (26 commits)
ARM: OMAP2+: PRM: provide generic API for system reset
ARM: OMAP3+: PRM: add generic API for reconfiguring I/O chain
ARM: OMAP4: PRM: make PRCM interrupt handler related functions static
ARM: OMAP3: PRM: make PRCM interrupt handler related functions static
ARM: OMAP4: PRM: make omap4_prm_read/write_inst_reg calls static
ARM: AM33xx: PRM: make direct register access functions static
ARM: AM33xx: PRM: move global warm reset implementation to driver
ARM: OMAP4+: CM: remove omap4_cm1/cm2_* functions
ARM: OMAP4: CM: make cminst direct register access functions static
ARM: OMAP4: CM: move public definitions from cminst44xx.h to cm44xx.h
ARM: OMAP2+: PRM: add generic API for checking hardreset status
ARM: OMAP2+: PRM: add generic API for deasserting hardware reset
ARM: OMAP2+: PRM: add generic API for asserting hardware reset
ARM: AM33xx: PRM: add support for prm_init
ARM: AM43xx: hwmod: use OMAP4 hardreset ops instead of the AM33xx version
ARM: AM33xx: hwmod: remove am33xx specific module SoC opts
ARM: OMAP2/3: CM: make cm_split_idlest_reg SoC calls static
ARM: OMAP2+: CM: add common APIs for cm_module_enable/disable
ARM: OMAP2+: CM: make clkdm_hwsup operations static
ARM: OMAP4+/AM33xx: CM: add common API for cm_wait_module_idle
...
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
omap4 and later, and to fix clock DPLL fixes by adding determine_rate
and set_rate_and_parent.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=R6s9
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v3.19/clocks-and-pm' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/soc
Pull "omap soc changes for v3.19" from Tony Lindgren:
SoC related changes for omaps. Mostly to make PM easier to use for
omap4 and later, and to fix clock DPLL fixes by adding determine_rate
and set_rate_and_parent.
* tag 'omap-for-v3.19/clocks-and-pm' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: OMAP2+: hwmod: drop unnecessary list initialization
ARM: OMAP3+: DPLL: use determine_rate() and set_rate_and_parent()
ARM: OMAP3: clock: add support for dpll4_set_rate_and_parent
ARM: OMAP4: clock: add support for determine_rate for omap4 regm4xen DPLL
ARM: OMAP3: clock: add new rate changing logic support for noncore DPLLs
ARM: OMAP3: clock: use clk_features flags for omap3 DPLL4 checks
ARM: OMAP4+: PM: Program CPU logic power state
ARM: OMAP4+: PM: Centralize static dependency mapping table
ARM: OMAP4: PM: Only do static dependency configuration in omap4_init_static_deps
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Hello Arnd, Kevin, Olof,
This is a very quiet release, featuring a small cleanup, a tosa change
on its charger driver, and support for pxa device-tree based pxa27x
boards.
The device-tree part will only be fully activated once clocks support
is fully operation in the common clock framework.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=Kpce
-----END PGP SIGNATURE-----
Merge tag 'pxa-for-3.19' of https://github.com/rjarzmik/linux into next/soc
Pull "arm: pxa: pxa for v3.19" from Robert Jarzmik:
This is a very quiet release, featuring a small cleanup, a tosa change
on its charger driver, and support for pxa device-tree based pxa27x
boards.
The device-tree part will only be fully activated once clocks support
is fully operation in the common clock framework.
* tag 'pxa-for-3.19' of https://github.com/rjarzmik/linux:
arm: pxa: add pxa27x device-tree support
arm: pxa: remove unnecessary includes from pxa-dt
arm: pxa: move init functions into generic.h
arm: pxa: add device-tree irq init for pxa27x
ARM: pxa: tosa: switch to gpio-charger
arm: mach-pxa: Convert pr_warning to pr_warn
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
"dss_fck" is a hacky clock, used to work around problems with MODULEMODE
bit handling in DSS hwmods.
These problems have now been solved, so we can remove the dss_fck clock.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Archit Taneja <archit.taneja@gmail.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
RFBI iclk was set to point to hacky "dss_fck", which will be removed.
Instead use "l3_div_ck", which is the proper clock for this. "l3_div_ck"
is the parent of "dss_fck", so the clock rate is the same as previously.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Archit Taneja <archit.taneja@gmail.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Instead of using a hacky "dss_fck" clock (which toggles the MODULEMODE
bit) as DSS L3 interface clock, set the .modulemode field in the
omap44xx_dss_hwmod. This works now that the DSS core hwmod is enabled
during DSS submodule resets.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Archit Taneja <archit.taneja@gmail.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Set DSS core hwmod as the parent for all the DSS submodules.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Archit Taneja <archit.taneja@gmail.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Set DSS core hwmod as the parent for all the DSS submodules.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Archit Taneja <archit.taneja@gmail.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Add a device-tree machine entry (DT_MACHINE_START) for pxa27x based
platforms.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Acked-by: Arnd Bergmann <arnd@arndb.de>
As the init functions necessary for machine init have moved to
generic.h, remove the unnecessary includes and prototypes definitions
from pxa-dt.c.
This removes the include of mach/pxaXXX-regs.h, and make pxa-dt generic
enough to accept other pxa variants.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Acked-by: Arnd Bergmann <arnd@arndb.de>
In order to have a unique .c file for all pxa variants device-tree
definitions, all the initialization functions for MACHINE_START and
DT_MACHINE_START have been put together into generic.h.
The alternative would have been one pxaXXX-dt.c file per variant.
The move is necessary because each include/mach/pxaXXX.h includes the
variant register descriptions which intersects and conflicts one with
each other.
The change is a preparation for pxa-dt.c to support multiple pxa,
ie. pxa3xx and pxa27x.
The machine files including mach/pxaXXX.h all include generic.h, which
guarantees no regression should be introduced.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Add the initializer for irqs in a device-tree machine on a pxa27x.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Switch to simpler gpio-charger module. PDA power requires additional
setup in platform file and is more suited for boards with separate AC
and USB charging inputs. Tosa has a unified input, so it's better suited
for gpio-charger.
Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Use the more common pr_warn.
Other miscellanea:
o Coalesce formats
o Realign arguments
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Add parent_hwmod pointer to omap_hwmod. This can be set to point to a
"parent" hwmod that needs to be enabled for the "child" hwmod to work.
This is used at hwmod setup time: when doing the initial setup and
reset, first enable the parent hwmod, and after setup and reset is done,
restore the parent hwmod to postsetup_state.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Archit Taneja <archit.taneja@gmail.com>
[paul@pwsan.com: add kerneldoc documentation for parent_hwmod; note that it
is a temporary workaround]
Signed-off-by: Paul Walmsley <paul@pwsan.com>
