Convert array bcast_addr from unsigned char to u8.
Clears a line over 80 characters checkpatch warning.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20191026121135.181897-2-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cleanup comments in rtw_sta_mgt.c to use kernel block comment style
and not exceed 80 characters line length.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20191026121135.181897-1-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
: Fix warnings of alignment should match open parenthesis.
Issue detected by checkpatch tool.
Signed-off-by: Jules Irenge <jbi.octave@gmail.com>
Link: https://lore.kernel.org/r/20191019140719.2542-6-jbi.octave@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix check warnings of logical continuations
should be on the previous line.
Issue detected by checkpatch tool.
Signed-off-by: Jules Irenge <jbi.octave@gmail.com>
Link: https://lore.kernel.org/r/20191019140719.2542-4-jbi.octave@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix warnings of no space is necessary after a cast.
Issue detected by checkpatch tool.
Signed-off-by: Jules Irenge <jbi.octave@gmail.com>
Link: https://lore.kernel.org/r/20191019140719.2542-2-jbi.octave@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Original API declares 16 tx_policies. But in fact, the 16th is used
internally by the firmware. So, only 15 tx_policies are available for
driver.
Reported-by: Alban Jeantheau <alban.jeantheau@silabs.com>
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20191017093954.657-6-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
MAC address read from chip is unconditionally used even if a MAC
address is configured in device tree.
Reported-by: Marc Dorval <marc.dorval@silabs.com>
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20191017093954.657-5-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In most case, of_get_mac_address() return NULL in case of error.
However, if CONFIG_OF_NET is not set, it return -ENODEV.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20191017093954.657-4-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If CONFIG_MMC=m and CONFIG_WFX=y, compilation complains with undefined
references:
drivers/staging/wfx/main.o: In function `wfx_core_init': /linux/drivers/staging/wfx/main.c:488: undefined reference to `sdio_register_driver'
drivers/staging/wfx/main.o: In function `wfx_core_exit': /linux/drivers/staging/wfx/main.c:496: undefined reference to `sdio_unregister_driver'
drivers/staging/wfx/main.o:(.debug_addr+0x1a8): undefined reference to `sdio_register_driver'
drivers/staging/wfx/main.o:(.debug_addr+0x6f0): undefined reference to `sdio_unregister_driver'
Indeed, symbols sdio_* are not present in kernel image.
This patch disallows CONFIG_WFX=y if CONFIG_MMC=m.
This solution impacts users who want to use SPI bus with configuration:
CONFIG_WFX=y + CONFIG_SPI=y + CONFIG_MMC=m. However, I think this is a
twisted case. So, I think it won't be missed.
Reported-by: zhong jiang <zhongjiang@huawei.com>
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20191017093954.657-3-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
"Secure link" feature is not available in in-tree driver (because it
depends on mbedtls). Thus, secure_link.h only empty functions.
Module parameter "slk_key" and associated function wfx_fill_sl_key() had
an unjustifiable place in main.c. This patch relocate them to
secure_link.h.
BTW, content of wfx_fill_sl_key() is now useless. Just keep a warning if
user try to use "slk_key" attribute (unsupported by this driver).
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20191017093954.657-2-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
During concurrent mode(AP/STA + P2P), pass the mgmt frames received from
firmware to appropriate interface. Iterate the complete interface list
to pass frames on the interface which has registered to receive mgmt
frame. Added extra time for 'remain_on_ch' timer to ensure that timeout
for uncanceled remain_on_channel is not triggered & 'p2p_listen_state'
is not cleared before passing the mgmt frames to p2p interface.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Link: https://lore.kernel.org/r/20191018124511.22751-1-ajay.kathat@microchip.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The "rates_len" value needs to be capped so that the memcpy() doesn't
copy beyond the end of the array.
Fixes: c5c77ba18e ("staging: wilc1000: Add SDIO/SPI 802.11 driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Adham Abozaeid <adham.abozaeid@microchip.com>
Link: https://lore.kernel.org/r/20191017091832.GB31278@mwanda
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In a fast disconnect/connect sequence, cfg80211_connect_result() can
fail to find the bss object which the driver is connecting to. Detailed
sequence of events:
* Driver is connected in STA mode
* Disconnect request arrives from user space. Driver disconnects and
calls cfg80211_disconnected() which adds new event to the
cfg80211_wq worker thread
* Connect request arrives from user space. cfg80211_connect() stores
ssid/ssid_len and calls rdev_connect()
* __cfg80211_disconnected() runs in worker thread and zero
wdev->ssid_len
* Connect succeeds. Driver calls cfg80211_connect_result() which fails
to find the bss because wdev->ssid_len is zero
To overcome this, upon connect request, store the bss object in the
driver and upon connect completion pass it to kernel using
cfg80211_connect_bss().
Ref: bcdd49b074 ("store bss object and use cfg80211_connect_bss()")
Signed-off-by: Adham Abozaeid <adham.abozaeid@microchip.com>
Link: https://lore.kernel.org/r/20191017165105.27429-1-adham.abozaeid@microchip.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove code valid only for 5 GHz, according to the TODO.
- find and remove remaining code valid only for 5 GHz. Most of the obvious
ones have been removed, but things like channel > 14 still exist.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20191024155918.13399-1-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix warnings of space required between operator and variables.
Issue detected by checkpatch tool
Signed-off-by: Jules Irenge <jbi.octave@gmail.com>
Link: https://lore.kernel.org/r/20191017163126.23992-1-jbi.octave@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Change "in to" in "Changing comments in to linux standred format" on
line 3 to "into"
Signed-off-by: Evan Chime <chime.evan.dri.devel@gmail.com>
Link: https://lore.kernel.org/r/20191018175725.GA8274@ik-ubuntu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bool initializations should use true and false. Bool tests don't need
comparisons. Based on contributions from Joe Perches, Rusty Russell
and Bruce W Allan.
The semantic patch that makes this report is available
in scripts/coccinelle/misc/boolinit.cocci.
More information about semantic patching is available at
http://coccinelle.lip6.fr/
Signed-off-by: Jamal Shareef <jamal.k.shareef@gmail.com>
Link: https://lore.kernel.org/r/20191024223937.2800-1-jamal.k.shareef@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drivers/staging/comedi/drivers/ni_routes.c:52:21: warning:
route_table_size defined but not used [-Wunused-const-variable=]
It is never used since introduction.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20191023075206.33088-1-yuehaibing@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The build of xtensa allmodconfig gives warning of:
In function 'cfg80211_rtw_scan':
warning: the frame size of 1040 bytes is larger than 1024 bytes
Allocate memory for ssid dynamically to reduce the stack usage, as an
added benifit we can remove the memset by using kzalloc while allocating
memory.
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Link: https://lore.kernel.org/r/20191018101854.31876-1-sudipm.mukherjee@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The build of xtensa allmodconfig gives warning of:
In function 'rtw_cfg80211_unlink_bss':
warning: the frame size of 1136 bytes is larger than 1024 bytes
Instead of having 'select_network' structure as a variable use it as a
pointer.
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20191018104837.23246-1-sudipm.mukherjee@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
