Set up error handling in mgag200_fbdev_init and mgag200fb_create such that
they release the things they allocate, rather than relying on someone
calling mga_fbdev_destroy.
Based on a patch by Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Link: http://lkml.kernel.org/r/55F6E68D.8070800@codeaurora.org
Reported-by: Ingo Molnar <mingo@kernel.org>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dave Airlie <airlied@gmail.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: dri-devel <dri-devel@lists.freedesktop.org>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
If the server isn't new enough to give us state, report the first
monitor as always connected, otherwise believe the server side.
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
Just adds the quirk for MSI R7 370 Armor 2X
Bug:
https://bugs.freedesktop.org/show_bug.cgi?id=91294
Signed-off-by: Maxim Sheviakov <mrader3940@yandex.ru>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In
commit 7a3f3d6667
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Thu Jul 9 23:44:28 2015 +0200
drm: Check locking in drm_for_each_connector
I added locking checks to drm_for_each_connector but failed that
through drm_helper_connector_dpms -> drm_helper_choose_encoder_dpms
it's used in a few more places in the amdgpu resume/suspend code.
Fix them up.
Note that we could use the connector iterator macros in there too, but
that's for the future.
Port of radeon commit:
drm/radeon: Sprinkle drm_modeset_lock_all to appease locking checks
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In
commit 7a3f3d6667
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Thu Jul 9 23:44:28 2015 +0200
drm: Check locking in drm_for_each_connector
I added locking checks to drm_for_each_connector but failed that
through drm_helper_connector_dpms -> drm_helper_choose_encoder_dpms
it's used in a few more places in the radeon resume/suspend code.
Fix them up.
Note that we could use the connector iterator macros in there too, but
that's for the future.
Reported-and-tested-by: Borislav Petkov <bp@alien8.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
we used to adopt wait_reg_mem to let CE wait before DE finish page
updating, but from Tonga+, CE doesn't support wait_reg_mem package so
this logic no longer works.
so here is another approach to do same thing:
Insert two of SWITCH_BUFFER at both front and end of vm_flush can
guarantee that CE not go further to process IB_const before vm_flush
done.
Insert two of SWITCH_BUFFER also works on CI, so remove legency method
to sync CE and ME
v2:
Insert double SWITCH_BUFFER at front of vm flush as well.
Signed-off-by: monk.liu <monk.liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
args->size is a u64. arg->pitch and args->height are u32. The
multiplication will overflow instead of using the high 32 bits as
intended.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There is no limit on args->data.data_size_bytes so we could read beyond
the end of the args->data.data[] array.
Reviewed-by: Christian König <christian.koenig@amd.com>
Reported-by: Ilja Van Sprundel <ivansprundel@ioactive.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The "alloc_size" calculation can overflow leading to memory corruption.
Reviewed-by: Christian König <christian.koenig@amd.com>
Reported-by: Ilja Van Sprundel <ivansprundel@ioactive.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The amdgpu_cs_parser_init() function doesn't clean up after itself but
instead the caller uses a free everything function amdgpu_cs_parser_fini()
on failure. This style of error handling is often buggy. In this
example, we call "drm_free_large(parser->chunks[i].kdata);" when it is
an unintialized pointer or when "parser->chunks" is NULL.
I fixed this bug by adding unwind code so that it frees everything that
it allocates.
I also mode some other very minor changes:
1) Renamed "r" to "ret".
2) Moved the chunk_array allocation to the start of the function.
3) Removed some initializers which are no longer needed.
Reviewed-by: Christian König <christian.koenig@amd.com>
Reported-by: Ilja Van Sprundel <ivansprundel@ioactive.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The value was much too low, which could cause the userspace visible
vblank counter to move backwards when the hardware counter wrapped
around.
Ported from radeon commit:
b0b9bb4dd5
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Jammy Zhou <Jammy.Zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
The patch was generated using fixed coccinelle semantic patch
scripts/coccinelle/api/memdup.cocci [1].
[1]: http://permalink.gmane.org/gmane.linux.kernel/2014320
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
User space passed the same handle before suspend and after resume,
so we have remove the session and handle destroy, and keep the
firmware untouched.
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Cc: stable@vger.kernel.org
Fixes suspend issues with UVD.
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Cc: stable@vger.kernel.org
Invalid messages can crash the hw otherwise
Ported from radeon commit a1b403da70
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Cc: stable@vger.kernel.org
This causes problems with multiple suspend/resume cycles.
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Cc: stable@vger.kernel.org
Embed the scheduler into the ring structure instead of allocating it.
Use the ring name directly instead of the id.
v2: rebased, whitespace cleanup
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: Chunming Zhou<david1.zhou@amd.com>
Move the fence related stuff into amdgpu_fence.c
v2: rework commit message, cause this is actually not a bug
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou<david1.zhou@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Just to be consistent with the other members.
v2: rename the ring member as well.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com> (v1)
Reviewed-by: Chunming Zhou<david1.zhou@amd.com>
Reorder the fields and properly return the kfifo_alloc error code.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: Chunming Zhou<david1.zhou@amd.com>
Use container_of rather than casting.
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: David Zhou <david1.zhou@amd.com>
Signed-off-by: Junwei Zhang <Jerry.Zhang@amd.com>
Use consistent naming across functions.
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: David Zhou <david1.zhou@amd.com>
Signed-off-by: Junwei Zhang <Jerry.Zhang@amd.com>
Reduces the locking and fencing overhead.
v2: add comment why we need the duplicates list in the GEM op.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Jammy Zhou <Jammy.Zhou@amd.com>
This allows for multiple BOs to have the same reservation object.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Jammy Zhou <Jammy.Zhou@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Adds an extra argument to amdgpu_bo_create, which is only used in amdgpu_prime.c.
Port of radeon commit 831b6966a6.
v2: fix up kfd.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Jammy Zhou <Jammy.Zhou@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
mem->start is a long, so this can overflow on 32bit systems.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Jammy Zhou <Jammy.Zhou@amd.com>
Cc: stable@vger.kernel.org
Just free the resources immediately after submitting the job.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: Jammy Zhou <Jammy.Zhou@amd.com>
And call the processed callback directly after submitting the job.
v2: split adding error handling into separate patch.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: Jammy Zhou <Jammy.Zhou@amd.com>
Otherwise the resource blocked by it will never be reclaimed.
v2: add DRM_ERROR.
v3: fix typo in commit message
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: Chunming Zhou<david1.zhou@amd.com>
Reviewed-by: Jammy Zhou <Jammy.Zhou@amd.com>
track sched job status like the length of job queue and hw job queue.
v2: fix build after rebase
Signed-off-by: Chunming Zhou <david1.zhou@amd.com>
Reviewed-by: Jammy Zhou <Jammy.Zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Make sure the CP waits for the write to be confirmed before
invalidating.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Insert wait for reg mem after EOP to fix potential issue with vm context switch
v2: move wait to vm_flush() use equal instead of greater than.
Signed-off-by: Anatoli Antonovitch <anatoli.antonovitch@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Provide module parameter to enable/disable them. Still
enabled by default.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
The VBT MIPI Sequence Block version 3 has forward incompatible changes:
First, the block size in the header has been specified reserved, and the
actual size is a separate 32-bit value within the block. The current
find_section() function to will only look at the size in the block
header, and, depending on what's in that now reserved size field,
continue looking for other sections in the wrong place.
Fix this by taking the new block size field into account. This will
ensure that the lookups for other sections will work properly, as long
as the new 32-bit size does not go beyond the opregion VBT mailbox size.
Second, the contents of the block have been completely
changed. Gracefully refuse parsing the yet unknown data version.
Cc: Deepak M <m.deepak@intel.com>
Cc: stable@vger.kernel.org
Reviewed-by: Deepak M <m.deepak@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
This fixes the warnings like
"plane A assertion failure, should be disabled but not"
that on the initial modeset during boot. This can happen if
the primary plane is enabled by the firmware, but inheriting
it fails because the DMAR is active or for other reasons.
Most likely caused by
commit 36750f284b
Author: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Date: Mon Jun 1 12:49:54 2015 +0200
drm/i915: update plane state during init
Reported-by: Andreas Reis <andreas.reis@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=91429
Reported-and-tested-by: Emil Renner Berthing <kernel@esmil.dk>
Tested-by: Andreas Reis <andreas.reis@gmail.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
On HSW at least (still testing other platforms, but should be harmless
elsewhere), the DSL reg reads back as 0 when read around vblank start
time. This ends up confusing the atomic start/end checking code, since
it causes the update to appear as if it crossed a frame count boundary.
Avoid the problem by making sure we don't return scanline_offset from
the get_crtc_scanline function. In moving the code there, I add to add
an additional delay since it could be called and have a legitimate 0
result for some time (depending on the pixel clock).
v2: move hsw dsl read hack to get_crtc_scanline (Ville)
v3: use break instead of goto (Ville)
update comment with workaround details (Ville)
References: https://bugs.freedesktop.org/show_bug.cgi?id=91579
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Fix the following 'make htmldocs' warnings:
.//drivers/gpu/drm/i915/intel_audio.c:439: warning: No description found for parameter 'intel_encoder'
.//drivers/gpu/drm/i915/intel_audio.c:439: warning: Excess function parameter 'encoder' description in 'intel_audio_codec_disable'
.//drivers/gpu/drm/i915/intel_audio.c:439: warning: No description found for parameter 'intel_encoder'
.//drivers/gpu/drm/i915/intel_audio.c:439: warning: Excess function parameter 'encoder' description in 'intel_audio_codec_disable'
Signed-off-by: Geliang Tang <geliangtang@163.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
ioremap_cache() is currently not available on some architectures.
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
i915 supports enough atomic to have atomic fb-helper paths, even though
it does not yet advertise DRIVER_ATOMIC.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Add support for using atomic code-paths for restore_fbdev_mode().
Signed-off-by: Rob Clark <robdclark@gmail.com>
[danvet: Bikeshed comments slightly.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
set_irq_flags is ARM specific with custom flags which have genirq
equivalents. Convert drivers to use the genirq interfaces directly, so we
can kill off set_irq_flags. The translation of flags is as follows:
IRQF_VALID -> !IRQ_NOREQUEST
IRQF_PROBE -> !IRQ_NOPROBE
IRQF_NOAUTOEN -> IRQ_NOAUTOEN
For IRQs managed by an irqdomain, the irqdomain core code handles clearing
and setting IRQ_NOREQUEST already, so there is no need to do this in
.map() functions and we can simply remove the set_irq_flags calls. Some
users also modify IRQ_NOPROBE and this has been maintained although it
is not clear that is really needed. There appears to be a great deal of
blind copy and paste of this code.
Signed-off-by: Rob Herring <robh@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Russell King <linux@arm.linux.org.uk>
Cc: David Airlie <airlied@linux.ie>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
In the event that TTM doesn't find a compatible memory type for the
driver's first placement choice (placement without eviction), TTM
returns -EINVAL without trying the driver's second choice.
This causes problems on vmwgfx when VRAM is disabled before first modeset
and during VT switches when fbdev is not enabled.
Fix this by also trying the driver's second choice before returning
-EINVAL.
v2: Also check that man->use_type is true for the driver's second choice.
Fixes a bug where disallowed memory types could be used.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
On the guest kernel side, previously the FIFO has been mapped write-
combined. This has worked since VMs up to now has not honored the mapping
type and mapped the FIFO cached anyway. Since the FIFO is accessed cached
by the CPU on the virtual device side, this leads to inconsistent
mappings once the guest starts to honor the mapping types.
So ask for cached mappings when we map the FIFO. We do this by
using ioremap_cache() instead of ioremap_wc(), and remove the MTRR setup.
On the TTM side, MOBs, GMRs and VRAM buffers are already requesting
cached mappings for kernel- and user-space.
Cc: <stable@vger.kernel.org>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
If user space calls unreference on a user_dmabuf it will typically
kill the struct ttm_base_object member which is responsible for the
user-space visibility. However the dmabuf part may still be alive and
refcounted. In some situations, like for shared guest-backed surface
referencing/opening, the driver may try to reference the
struct ttm_base_object member again, causing an immediate kernel warning
and a later kernel NULL pointer dereference.
Fix this by always maintaining a reference on the struct
ttm_base_object member, in situations where it might subsequently be
referenced.
Cc: <stable@vger.kernel.org>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Since commit "drm/atomic-helper: Add option to update planes only on
active crtc" the drm_atomic_helper_commit_planes() function accepts an
active_only argument to skip updating planes when the associated CRTC is
inactive. Planes being disabled on an active CRTC are incorrectly
considered as associated with an inactive CRTC and are thus skipped,
preventing any plane disabling update from reaching drivers.
Fix it by checking the state of the CRTC stored in the old plane state
for planes being disabled.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=TEFw
-----END PGP SIGNATURE-----
Merge tag 'media/v4.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
"A series of patches that move part of the code used to allocate memory
from the media subsystem to the mm subsystem"
[ The mm parts have been acked by VM people, and the series was
apparently in -mm for a while - Linus ]
* tag 'media/v4.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
[media] drm/exynos: Convert g2d_userptr_get_dma_addr() to use get_vaddr_frames()
[media] media: vb2: Remove unused functions
[media] media: vb2: Convert vb2_dc_get_userptr() to use frame vector
[media] media: vb2: Convert vb2_vmalloc_get_userptr() to use frame vector
[media] media: vb2: Convert vb2_dma_sg_get_userptr() to use frame vector
[media] vb2: Provide helpers for mapping virtual addresses
[media] media: omap_vout: Convert omap_vout_uservirt_to_phys() to use get_vaddr_pfns()
[media] mm: Provide new get_vaddr_frames() helper
[media] vb2: Push mmap_sem down to memops
Pull drm fixes from Dave Airlie:
"Just a bunch of fixes to squeeze in before -rc1:
- three nouveau regression fixes
- one qxl regression fix
- a bunch of i915 fixes
... and some core displayport/atomic fixes"
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
drm/nouveau/device: enable c800 quirk for tecra w50
drm/nouveau/clk/gt215: Unbreak engine pausing for GT21x/MCP7x
drm/nouveau/gr/nv04: fix big endian setting on gr context
drm/qxl: validate monitors config modes
drm/i915: Allow DSI dual link to be configured on any pipe
drm/i915: Don't try to use DDR DVFS on CHV when disabled in the BIOS
drm/i915: Fix CSR MMIO address check
drm/i915: Limit the number of loops for reading a split 64bit register
drm/i915: Fix broken mst get_hw_state.
drm/i915: Pass hpd_status_i915[] to intel_get_hpd_pins() in pre-g4x
uapi/drm/i915_drm.h: fix userspace compilation.
drm/i915: Always mark the object as dirty when used by the GPU
drm/dp: Add dp_aux_i2c_speed_khz module param to set the assume i2c bus speed
drm/dp: Adjust i2c-over-aux retry count based on message size and i2c bus speed
drm/dp: Define AUX_RETRY_INTERVAL as 500 us
drm/atomic: Fix bookkeeping with TEST_ONLY, v3.
three nouveau regression fixes.
* 'linux-4.3' of git://anongit.freedesktop.org/git/nouveau/linux-2.6:
drm/nouveau/device: enable c800 quirk for tecra w50
drm/nouveau/clk/gt215: Unbreak engine pausing for GT21x/MCP7x
drm/nouveau/gr/nv04: fix big endian setting on gr context
Typo that snuck in with commit 6979c6303a
Signed-off-by: Roy Spliet <rspliet@eclipso.eu>
Reported-by: Pierre Moreau <pierre.morrow@free.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Broken since "gr: convert user classes to new-style nvkm_object"
Tested on a PPC64 G5 + NV34
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
bunch of drm fixes.
* tag 'topic/drm-fixes-2015-09-09' of git://anongit.freedesktop.org/drm-intel:
drm/dp: Add dp_aux_i2c_speed_khz module param to set the assume i2c bus speed
drm/dp: Adjust i2c-over-aux retry count based on message size and i2c bus speed
drm/dp: Define AUX_RETRY_INTERVAL as 500 us
drm/atomic: Fix bookkeeping with TEST_ONLY, v3.
Fixes headed for v4.3-rc1, including Maarten's DP MST state checker fix
you requested.
* tag 'drm-intel-next-fixes-2015-09-10' of git://anongit.freedesktop.org/drm-intel:
drm/i915: Allow DSI dual link to be configured on any pipe
drm/i915: Don't try to use DDR DVFS on CHV when disabled in the BIOS
drm/i915: Fix CSR MMIO address check
drm/i915: Limit the number of loops for reading a split 64bit register
drm/i915: Fix broken mst get_hw_state.
drm/i915: Pass hpd_status_i915[] to intel_get_hpd_pins() in pre-g4x
uapi/drm/i915_drm.h: fix userspace compilation.
drm/i915: Always mark the object as dirty when used by the GPU
Due to some recent changes in
drm_helper_probe_single_connector_modes_merge_bits(), old custom modes
were not being pruned properly. In current kernels,
drm_mode_validate_basic() is called to sanity-check each mode in the
list. If the sanity-check passes, the mode's status gets set to to
MODE_OK. In older kernels this check was not done, so old custom modes
would still have a status of MODE_UNVERIFIED at this point, and would
therefore be pruned later in the function.
As a result of this new behavior, the list of modes for a device always
includes every custom mode ever configured for the device, with the
largest one listed first. Since desktop environments usually choose the
first preferred mode when a hotplug event is emitted, this had the
result of making it very difficult for the user to reduce the size of
the display.
The qxl driver did implement the mode_valid connector function, but it
was empty. In order to restore the old behavior where old custom modes
are pruned, we implement a proper mode_valid function for the qxl
driver. This function now checks each mode against the last configured
custom mode and the list of standard modes. If the mode doesn't match
any of these, its status is set to MODE_BAD so that it will be pruned as
expected.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
With two exceptions (drm/qxl and drm/radeon) all vm_operations_struct
structs should be constant.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Comment disagrees with the code which has changed a lot since
it was documented.
Note that the logic to remove -EIO handling was dropped in
commit 1488fc08c1
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date: Tue Apr 24 15:47:31 2012 +0100
drm/i915: Remove the deferred-free list
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
In async mode crtc->config can be updated after the locks are released,
resulting in the wrong state being duplicated.
Note that this also removes a spurious assignment of crtc_state->crtc
introduced in
commit f0c60574eb
Author: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Date: Tue Apr 21 17:12:58 2015 +0300
drm/i915: Call drm helpers when duplicating crtc and plane states
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
With the conversion to atomic this cannot happen any more.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Unfortunately fbc still depends on legacy primary state, so
it can't be killed off completely yet.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This function was still using the legacy state, convert it to atomic.
While we're at it, fix the FIXME too and disable the primary plane.
v2 (Daniel):
- Add FIXME explaining that update_primary_planes should soon get
removed anyway.
- Don't call ->disable_plane since we can't disable the primary plane
with a CS flip (noticed by Ville).
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> (v1)
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Legacy state might not be updated any more.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This patch adds the intel_connector initialized to intel_hdmi
display, during the init phase, just like the other encoders do.
This attachment is very useful when we need to extract the connector
pointer during the hotplug handler function
Signed-off-by: Shashank Sharma <shashank.sharma@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Just like single link MIPI panels, similarly for dual link panels, pipe
to be configured is based on the DVO port from VBT Block 2. In hardware,
Port A is mapped with Pipe A and Port C is mapped with Pipe B.
This issue got introduced in -
commit 7e9804fdcf
Author: Jani Nikula <jani.nikula@intel.com>
Date: Fri Jan 16 14:27:23 2015 +0200
drm/i915/dsi: add drm mipi dsi host support
Cc: stable@vger.kernel.org # v4.0
Signed-off-by: Gaurav K Singh <gaurav.k.singh@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
If one disables DDR DVFS in the BIOS, Punit will apparently ignores
all DDR DVFS request. Currently we assume that DDR DVFS is always
operational, which leads to errors in dmesg when the DDR DVFS requests
time out.
Fix the problem by gently prodding Punit during driver load to find out
whether it will respond to DDR DVFS requests. If the request times out,
we assume that DDR DVFS has been permanenly disabled in the BIOS and
no longer perster the Punit about it.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=91629
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Clint Taylor <Clinton.A.Taylor@intel.com>
Tested-by: Clint Taylor <Clinton.A.Taylor@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Fix a wrong logical AND (&&) used for the range check of CSR MMIO.
Spotted nicely by gcc -Wlogical-op flag:
drivers/gpu/drm/i915/intel_csr.c: In function ‘finish_csr_load’:
drivers/gpu/drm/i915/intel_csr.c:353:41: warning: logical ‘and’ of mutually exclusive tests is always false [-Wlogical-op]
Fixes: eb805623d8 ('drm/i915/skl: Add support to load SKL CSR firmware.')
Cc: <stable@vger.kernel.org> # v4.2
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
This may cause issues because encoders are already destroyed so removing
active primaries may use freed memory. Instead free the fb directly,
ignoring refcount.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Right now, drm_sysfs_create() returns the newly allocated "struct class"
to the caller (which is drm_core_init()), which then has to set the
global variable 'drm_class'. During cleanup, though, we call
drm_sysfs_destroy() which implicitly uses the global 'drm_class'. This is
confusing, as ownership of the global 'drm_class' is non-obvious.
This patch changes drm_sysfs_create() to drm_sysfs_init() and makes it
initialize the 'drm_class' object directly, rather than returning it.
This way, both drm_sysfs_init() and drm_sysfs_destroy() work in a similar
fashion and manage the global drm class.
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Simplify `foo == NULL || IS_ERR(foo)` via IS_ERR_OR_NULL(). This is
pretty commonly used all over the kernel, especially for debugfs/sysfs
cleanup paths.
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
drm_av_sync_delay() doesn't change the passed in mode, so make it const.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
drm_select_eld() doesn't look at the passed in mode, so don't pass it
in.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
valid_inferred_mode() don't change the modes over which it iterates,
so make the iterator const.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
In I915_READ64_2x32 we attempt to read a 64bit register using 2 32bit
reads. Due to the nature of the registers we try to read in this manner,
they may increment between the two instruction (e.g. a timestamp
counter). To keep the result accurate, we repeat the read if we detect
an overflow (i.e. the upper value varies). However, some hardware is just
plain flaky and may endless loop as the the upper 32bits are not stable.
Just give up after a couple of tries and report whatever we read last.
v2: Use the most recent values when erring out on an unstable register.
Reported-by: russianneuromancer@ya.ru
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=91906
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: stable@vger.kernel.org
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
When an i2c WRITE gets an i2c defer or short i2c ack reply, we are
supposed to switch the request from I2C_WRITE to I2C_WRITE_STATUS_UPDATE
when we continue to poll for the completion of the request.
v2: Don't assume DP_AUX_I2C_WRITE is 0 even though it is, to make the
code more obvious to the casual reader (Jani)
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
[danvet: Resolve conflict due to changed context.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
A address-only I2C_WRITE can't be replied with a short i2c ack, but I
suppose it could be replied with an i2c defer. So the code should be
prepared for an address-only I2C_WRITE_STATUS_UPDATE.
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: "Terje Bergström" <tbergstrom@nvidia.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
When we get an i2c defer or short ack for i2c-over-aux write we need
to switch to WRITE_STATUS_UPDATE to poll for the completion of the
original request.
Looks like radeon doesn't do anything special with the request type,
so hopefully just treating it the same as a i2c write is enough.
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
When we get an i2c defer or short ack for i2c-over-aux write we need
to switch to WRITE_STATUS_UPDATE to poll for the completion of the
original request.
i915 doesn't try to interpret wht request type apart from separating
reads from writes, and so we should be able to treat this the same as
a normal i2c write.
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Rename the I2C_STATUS request to I2C_WRITE_STATUS_UPDATE to match the
spec.
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
This function can be used to duplicate an atomic state object. This is
useful for example to implement suspend/resume, where the state before
suspend can be saved and restored upon resume.
v2: move locking to caller, be more explicit about prerequisites
v3: explicitly pass lock acquisition context, improve kerneldoc
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Requested by Laurent.
Note that this uses the new markdown support which will only land in
kernel 4.4 (for the code snippet).
v2: A few spelling fixes I spotted myself.
v3: Big reword for commit_planes() kerneldoc based on a text from
Laurent.
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Thierry Reding <treding@nvidia.com> (v1 on irc)
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
connector->encoder is initialized as NULL. Fix this by setting it in
during pre enable. MST connectors are not read out during initial hw
readout, and have no fixed encoder mappings. So it's harmless to
return false when the connector has never been assigned to an encoder.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
With drivers supporting runtime pm it's generally not a good idea to
touch the hardware when it's off. Add an option to the commit_planes
helper to support this case.
Note that the helpers already add all planes on a crtc when a modeset
happens, hence plane updates will not be lost if drivers set this to
true.
v2: Check for NULL state->crtc before chasing the pointer. Also check
both old and new crtc if there's a switch. Finally just outright
disallow switching crtcs for a plane if the plane is in active use, on
most hardware that doesn't make sense.
v3: Since commit_planes(active_only = true) is for enabling things
only after all the crtc are on we should only look at the new crtc to
decide whether to call the plane hooks - if the current CRTC isn't on
then skip. If the old crtc (when moving a plane) went down then the
plane should have been disabled as part of the pipe shutdown work
already. For which there's currently no helper really unfortunately.
Also move the check for wether a plane gets a new CRTC assigned while
still in active use out of this patch.
v4: Rebase over exynos changes.
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Thierry Reding <treding@nvidia.com>
Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Tested-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
This removes the need to separately track fb changes i915.
That will be done as a separate commit, however.
Changes since v1:
- Add dri-devel to cc.
- Fix a check in intel's prepare and cleanup fb to take rotation
into account.
Changes since v2:
- Split out i915 changes to a separate commit.
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
[danvet: Squash in msm fixup from Maarten.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This will make sure we get a lockdep spat in all cases
even if the context is a complete garbage pointer.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Make generic_edid_names[] const since it's supposed to be immutable.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Allow comma separated filenames in the edid_firmware parameter.
For example:
edid_firmware=eDP-1:edid/1280x480.bin,DP-2:edid/1920x1080.bin
v2: Use strsep() to simplify parsing of comma seperated string. (Matt)
Move initial bail before strdup. (Matt)
v3: Changed conditionals after while loop to make more readable (Jani)
Updated kernel-parameters.txt to reflect changes (Jani)
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Bob Paauwe <bob.j.paauwe@intel.com>
[danvet: Flatten else control flow and appease checkpatch.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Very strictly speaking this is possible if you have special hw and
genlocked CRTCs. In general switching a plane between two active CRTC
just won't work so well and is probably not tested at all. Just forbid
it.
I've put this into the core since right now no helper or driver copes
with it, no userspace has code for it and no one asks for it. Yes
there's piles of corner-cases where this would be possible to do this
like:
- switch from inactive crtc to active crtc
- switch from active crtc to inactive crtc
- genlocked display
- invisible plane (to do whatever)
- idle plane hw due to dsi cmd mode/psr
- whatever
but looking at details it's not that easy to implement this correctly.
Hence just put it into the core and add a comment, since the only
userspace we have right now for atomic (weston) doesn't want to use
direct plane switching either.
v2: don't bother with complexity and just outright disallow plane
switching without the intermediate OFF state. Simplifies drivers, we
don't have any hw that could do it anyway and current atomic userspace
(weston) works like this already anyway.
v3: Bikeshed function name (Ville) and add comment (Rob).
v4: Also bikeshed commit message (Rob).
v5: Fix compile warnings reported by 0-day.
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Daniel Stone <daniels@collabora.com>
Acked-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Faster than recompiling.
Note that restore_fbdev_mode_unlocked is a bit special and the only
one which returns an error code when fbdev isn't there - i915 needs
that one to not fall over with some additional fbcon related restore
code. Everyone else just ignores the return value or only prints a
DRM_DEBUG level message.
Reviewed-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
These functions are used by drivers to release fbdev emulation
buffers. We need to make them resilient to NULL pointers to
make the fbdev compile/runtime knobs not cause Oopses on module
unload.
Cc: Archit Taneja <architt@codeaurora.org>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Using bool and returning true upon error is very uncommon. Also an int
return value is actually what all the callers which did check it seem
to have expected.
v2: Restore hunk misplaced in a rebase, spotted by Rob.
Cc: Rob Clark <robdclark@gmail.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Without the () the markup and more important hyperlinking wont happen.
v2: Also fix nearby type Laurent spotted.
v3: Actually git add. Argh!
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
The adj_start calculation for DRM_MM_CREATE_TOP should happen after
mm->color_adjust. There was an inconsistency between
drm_mm_insert_helper_range
and drm_mm_insert_helper, as the later was already updating after
color_adjust.
Didn't spot it before, as color_adjust is only done in systems without
LLC. But I'm not aware of anybody using this test case yet.
Signed-off-by: Michel Thierry <michel.thierry@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Legacy s/r hooks are only used for shadow-attaching drivers, warn
when a KMS driver tries to use them.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Fall back to VBT based backlight modulation frequency if it's not
set. Do not hard code.
This could be a problem if there is no VBT.
Cc: Clint Taylor <clinton.a.taylor@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Tested-by: Clint Taylor <Clinton.A.Taylor@intel.com>
Reviewed-by: Clint Taylor <Clinton.A.Taylor@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Normally we determine the backlight PWM modulation frequency (which we
also use as backlight max value) from the backlight registers at module
load time, expecting the registers have been initialized by the BIOS. If
this is not the case, we fail.
The VBT contains the backlight modulation frequency in Hz. Add platform
specific functions to convert the frequency in Hz to backlight PWM
modulation frequency, and use them to initialize the backlight when the
registers are not initialized by the BIOS.
v2: Fix SPT and VLV. Thanks to Clint for the VLV code.
Cc: Clint Taylor <clinton.a.taylor@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Clint Taylor <Clinton.A.Taylor@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
