drop VPFE_CMD_S_CCDC_RAW_PARAMS ioctl from dm355/dm644x following reasons:
- This ioctl was never in public api and was only defined in kernel header.
- The function set_params constantly mixes up pointers and phys_addr_t
numbers.
- This is part of a 'VPFE_CMD_S_CCDC_RAW_PARAMS' ioctl command that is
described as an 'experimental ioctl that will change in future kernels'.
- The code to allocate the table never gets called after we copy_from_user
the user input over the kernel settings, and then compare them
for inequality.
- We then go on to use an address provided by user space as both the
__user pointer for input and pass it through phys_to_virt to come up
with a kernel pointer to copy the data to. This looks like a trivially
exploitable root hole.
Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
this patch makes sure VPFE_CMD_S_CCDC_RAW_PARAMS ioctl no longer works
for vpfe_capture driver with a minimal patch suitable for backporting.
- This ioctl was never in public api and was only defined in kernel header.
- The function set_params constantly mixes up pointers and phys_addr_t
numbers.
- This is part of a 'VPFE_CMD_S_CCDC_RAW_PARAMS' ioctl command that is
described as an 'experimental ioctl that will change in future kernels'.
- The code to allocate the table never gets called after we copy_from_user
the user input over the kernel settings, and then compare them
for inequality.
- We then go on to use an address provided by user space as both the
__user pointer for input and pass it through phys_to_virt to come up
with a kernel pointer to copy the data to. This looks like a trivially
exploitable root hole.
Due to these reasons we make sure this ioctl now returns -EINVAL and backport
this patch as far as possible.
Fixes: 5f15fbb68f ("V4L/DVB (12251): v4l: dm644x ccdc module for vpfe capture driver")
Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Cc: <stable@vger.kernel.org> # for v3.7 and up
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
In venus_boot(), we pass a pointer to a phys_addr_t
into dmam_alloc_coherent, which the compiler warns about:
platform/qcom/venus/firmware.c: In function 'venus_boot':
platform/qcom/venus/firmware.c:63:49: error: passing argument 3 of 'dmam_alloc_coherent' from incompatible pointer type [-Werror=incompatible-pointer-types]
To avoid the error refactor venus_boot function by discard
dma_alloc_coherent invocation because we don't want to map the
memory for the device. Something more, the usage of
DMA mapping API is actually wrong and the current
implementation relies on several bugs in DMA mapping code.
When these bugs are fixed that will break firmware loading,
so fix this now to avoid future troubles.
The meaning of venus_boot is to copy the content of the
firmware buffer into reserved (and memblock removed)
block of memory and pass that physical address to the
trusted zone for authentication and mapping through iommu
form the secure world. After iommu mapping is done the iova
is passed as ane entry point to the remote processor.
After this change memory-region property is parsed manually
and the physical address is memremap to CPU, call mdt_load to
load firmware segments into proper places and unmap
reserved memory.
Fixes: af2c3834c8 ("[media] media: venus: adding core part and helper functions")
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Not entirely sure what triggers it, but with venus build as kernel
module and in initrd, we hit this crash:
Unable to handle kernel paging request at virtual address ffff80003c039000
pgd = ffff00000a14f000
[ffff80003c039000] *pgd=00000000bd9f7003, *pud=00000000bd9f6003, *pmd=00000000bd9f0003, *pte=0000000000000000
Internal error: Oops: 96000007 [#1] SMP
Modules linked in: qcom_wcnss_pil(E+) crc32_ce(E) qcom_common(E) venus_core(E+) remoteproc(E) snd_soc_msm8916_digital(E) virtio_ring(E) cdc_ether(E) snd_soc_lpass_apq8016(E) snd_soc_lpass_cpu(E) snd_soc_apq8016_sbc(E) snd_soc_lpass_platform(E) v4l2_mem2mem(E) virtio(E) snd_soc_core(E) ac97_bus(E) snd_pcm_dmaengine(E) snd_seq(E) leds_gpio(E) videobuf2_v4l2(E) videobuf2_core(E) snd_seq_device(E) snd_pcm(E) videodev(E) media(E) nvmem_qfprom(E) msm(E) snd_timer(E) snd(E) soundcore(E) spi_qup(E) mdt_loader(E) qcom_tsens(E) qcom_spmi_temp_alarm(E) nvmem_core(E) msm_rng(E) uas(E) usb_storage(E) dm9601(E) usbnet(E) mii(E) mmc_block(E) adv7511(E) drm_kms_helper(E) syscopyarea(E) sysfillrect(E) sysimgblt(E) fb_sys_fops(E) qcom_spmi_vadc(E) qcom_vadc_common(PE) industrialio(E) pinctrl_spmi_mpp(E)
pinctrl_spmi_gpio(E) rtc_pm8xxx(E) clk_smd_rpm(E) sdhci_msm(E) sdhci_pltfm(E) qcom_smd_regulator(E) drm(E) smd_rpm(E) qcom_spmi_pmic(E) regmap_spmi(E) ci_hdrc_msm(E) ci_hdrc(E) usb3503(E) extcon_usb_gpio(E) phy_msm_usb(E) udc_core(E) qcom_hwspinlock(E) extcon_core(E) ehci_msm(E) i2c_qup(E) sdhci(E) mmc_core(E) spmi_pmic_arb(E) spmi(E) qcom_smd(E) smsm(E) rpmsg_core(E) smp2p(E) smem(E) hwspinlock_core(E) gpio_keys(E)
CPU: 2 PID: 551 Comm: irq/150-venus Tainted: P E 4.12.0+ #1625
Hardware name: qualcomm dragonboard410c/dragonboard410c, BIOS 2017.07-rc2-00144-ga97bdbdf72-dirty 07/08/2017
task: ffff800037338000 task.stack: ffff800038e00000
PC is at hfi_sys_init_done+0x64/0x140 [venus_core]
LR is at hfi_process_msg_packet+0xcc/0x1e8 [venus_core]
pc : [<ffff00000118b384>] lr : [<ffff00000118c11c>] pstate: 20400145
sp : ffff800038e03c60
x29: ffff800038e03c60 x28: 0000000000000000
x27: 00000000000df018 x26: ffff00000118f4d0
x25: 0000000000020003 x24: ffff80003a8d3010
x23: ffff00000118f760 x22: ffff800037b40028
x21: ffff8000382981f0 x20: ffff800037b40028
x19: ffff80003c039000 x18: 0000000000000020
x17: 0000000000000000 x16: ffff800037338000
x15: ffffffffffffffff x14: 0000001000000014
x13: 0000000100001007 x12: 0000000100000020
x11: 0000100e00000000 x10: 0000000000000001
x9 : 0000000200000000 x8 : 0000001400000001
x7 : 0000000000001010 x6 : 0000000000000148
x5 : 0000000000001009 x4 : ffff80003c039000
x3 : 00000000cd770abb x2 : 0000000000000042
x1 : 0000000000000788 x0 : 0000000000000002
Process irq/150-venus (pid: 551, stack limit = 0xffff800038e00000)
Call trace:
[<ffff00000118b384>] hfi_sys_init_done+0x64/0x140 [venus_core]
[<ffff00000118c11c>] hfi_process_msg_packet+0xcc/0x1e8 [venus_core]
[<ffff00000118a2b4>] venus_isr_thread+0x1b4/0x208 [venus_core]
[<ffff00000118e750>] hfi_isr_thread+0x28/0x38 [venus_core]
[<ffff000008161550>] irq_thread_fn+0x30/0x70
[<ffff0000081617fc>] irq_thread+0x14c/0x1c8
[<ffff000008105e68>] kthread+0x138/0x140
[<ffff000008083590>] ret_from_fork+0x10/0x40
Code: 52820125 52820207 7a431820 54000249 (b9400263)
---[ end trace c963460f20a984b6 ]---
The problem is that in the error case, we've incremented the data ptr
but not decremented rem_bytes, and keep reading (presumably garbage)
until eventually we go beyond the end of the buffer.
Instead, on first error, we should probably just bail out. Other
option is to increment read_bytes by sizeof(u32) before the switch,
rather than only accounting for the ptype header in the non-error
case. Note that in this case it is HFI_ERR_SYS_INVALID_PARAMETER,
ie. an unrecognized/unsupported parameter, so interpreting the next
word as a property type would be bogus. The other error cases are
due to truncated buffer, so there isn't likely to be anything valid
to interpret in the remainder of the buffer. So just bailing seems
like a reasonable solution.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
If QCOM_MDT_LOADER is enabled, but ARCH_QCOM is not, we run into
a build error:
ERROR: "qcom_mdt_load" [drivers/media/platform/qcom/venus/venus-core.ko] undefined!
ERROR: "qcom_mdt_get_size" [drivers/media/platform/qcom/venus/venus-core.ko] undefined!
This changes the 'select' statement again, so we only try to enable
those symbols when the drivers will actually get built, and explicitly
test for QCOM_MDT_LOADER to be enabled before calling into it.
Fixes: 76724b30f2 ("[media] media: venus: enable building with COMPILE_TEST")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Without PM support, gcc warns about two unused functions:
platform/qcom/venus/core.c:146:13: error: 'venus_clks_disable' defined but not used [-Werror=unused-function]
platform/qcom/venus/core.c:126:12: error: 'venus_clks_enable' defined but not used [-Werror=unused-function]
The problem as usual are incorrect #ifdefs, so the easiest fix
is to do away with the #ifdef completely and mark the suspend/resume
handlers as __maybe_unused, which they are.
Fixes: af2c3834c8 ("[media] media: venus: adding core part and helper functions")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
As we're already touching on dvb_ca_en50221 to cleanup
checkpatch issues, do that also for its header file, with:
$ ./scripts/checkpatch.pl --strict --fix-inplace -f drivers/media/dvb-core/dvb_ca_en50221.h
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
- Running "checkpatch.pl -strict -f ..." gave more checks to fix.
* Blank lines aren't necessary after an open brace '{'
* Comparison to NULL written as "!<var>"
* CHECK: Blank lines aren't necessary before a close brace '}'
Signed-off-by: Jasmin Jessich <jasmin@anw.at>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Some EXPORT_SYMBOL() on this file don't match the name of functions
that precedes them.
Signed-off-by: Jasmin Jessich <jasmin@anw.at>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Fixed most of:
WARNING: line over 80 characters
The remaining lines are printk strings, which should not be split and
lines where I thing they should stay as they are.
Signed-off-by: Jasmin Jessich <jasmin@anw.at>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
- The STATUSREG_TXERR definition is not used and it has style
problems, too. Removing it seems to solve both issues.
Signed-off-by: Jasmin Jessich <jasmin@anw.at>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Used a helper variable "struct dvb_ca_slot *sl" instead of
"ca->slot_info[slot]". This reduces the line length and simplifies
code reading.
Fixed also "-strict" checks in this patch:
- Comparison to NULL written as "!<var>".
Signed-off-by: Jasmin Jessich <jasmin@anw.at>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Fixed all:
ERROR: do not use assignment in if condition
Fixed also "-strict" checks in this patch:
- Changed "if (ret != 0)" to "if (ret)".
- Camel case variables have been converted to kernel_case.
- Comparison to NULL written as "!<var>".
- No space is necessary after a cast.
Signed-off-by: Jasmin Jessich <jasmin@anw.at>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Fixed all:
WARNING: msleep < 20ms can sleep for up to 20ms
by using usleep_range.
Signed-off-by: Jasmin Jessich <jasmin@anw.at>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The CAM poll code for the budget-av is exactly the same on several
places. Extracting the code to a new function improves maintainability.
Signed-off-by: Jasmin Jessich <jasmin@anw.at>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Refactored "dvb_ca_en50221_thread" by moving the state machine into the
new function "dvb_ca_en50221_thread_state_machine". This reduces the
thread function size and reduces the structural complexity and of course
gives us more space to meet the line length goal in the new function.
Signed-off-by: Jasmin Jessich <jasmin@anw.at>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
While cab_state->state gives a quite accurate indication of the demod
signal status, it might be incorrect if cab_algo() wasn't able to
determine the exact status, with cab_algo() being the only place where
this status was updated from, and it is only called upon tuning to new
parameters passed to set_frontend(). Thus, the status will be wrong
until the demod is retuned. With the cab_signal_type parsing in
read_status(), this results in unusual fe_states like FE_HAS_SIGNAL |
FE_HAS_CARRIER | FE_HAS_LOCK, which, while userspace applications check
for FE_HAS_LOCK and work fine, leads to missing CNR or UCB stats.
Fix this by re-reading CAB_FSM_STATUS and updating cab_state->state() in
read_status(). While at it, refactor the fsm/qamfeclock and the
fsm->signaltype parsing into separate functions to make things cleaner
and deduplicate code. Also, assume full QAM FEC lock equals full
FE_STATUS.
Signed-off-by: Daniel Scheller <d.scheller@gmx.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Historically, mdev argument name was being used on both struct
media_device and struct media_devnode. Recently most occurrences of mdev
referring to struct media_devnode were replaced by devnode, which makes
more sense. Fix the last remaining occurrence.
Fixes: 163f1e93e9 ("[media] media-devnode: fix namespace mess")
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Simplify the code to satisfy Linux coding style.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Don't populate array dib0090_tuning_table_cband_7090e_aci on the stack but
instead make it static. Makes the object code smaller by over 180 bytes:
Before:
text data bss dec hex filename
40052 7320 192 47564 b9cc dib0090.o
After:
text data bss dec hex filename
39780 7408 192 47380 b914 dib0090.o
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Don't populate const arrays on the stack but instead make them static.
Makes the object code smaller by over 1800 bytes:
Before:
text data bss dec hex filename
94100 9160 0 103260 1935c drxj.o
After:
text data bss dec hex filename
91044 10400 0 101444 18c44 drxj.o
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Don't populate arrays slowIncrDecLUT and fastIncrDecLUT on the stack but
instead make them static. Makes the object code smaller by over 100 bytes:
text data bss dec hex filename
27776 832 64 28672 7000 drxd_hard.o
text data bss dec hex filename
27530 976 64 28570 6f9a drxd_hard.o
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Discovered using w_scan when scanning DVB-T/T2: When w_scan goes from -T
to -T2, it does so without stopping the frontend using .sleep. Due to
this, the demod operation mode isn't re-setup, but as it still is in
STATE_ACTIVE_TC, PLP and T2 Profile are set up, but only retune_active()
is called, leaving the demod in T mode, thus not operable on any T2
frequency.
Fix this by putting the demod to sleep if priv->system isn't equal to
p->delsys. To properly accomplish this, sleep_tc() is split into
sleep_tc() and shutdown_tc(), where sleep_tc() will only perform the
sleep operation, while shutdown_tc() additionally performs the full
demod shutdown (to keep the behaviour when the .sleep FE_OP is called).
Signed-off-by: Daniel Scheller <d.scheller@gmx.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Don't populate array gamma_par_mask on the stack but instead make it
static. Makes the object code smaller by 148 bytes:
Before:
text data bss dec hex filename
2993 1104 0 4097 1001 drivers/staging/fbtft/fb_st7789v.o
After:
text data bss dec hex filename
2757 1192 0 3949 f6d drivers/staging/fbtft/fb_st7789v.o
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Don't populate arrays on the stack but make them static. Makes
the object code smaller:
Before:
text data bss dec hex filename
89299 21704 64 111067 1b1db cxd2841er.o
After:
text data bss dec hex filename
85823 23432 64 109319 1ab07 cxd2841er.o
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
When a user starts and stops filtering at a demux device too quickly
in a very short interval, the user process hangs in uninterruptible sleep,
due to an inconsistency of kthread status in the driver.
The kthread can be stopped before it starts running its thread function,
but the invocation status was partly managed in the kthread function,
which resulted in a double kthread_stop() of one kthread.
Signed-off-by: Akihiro Tsukada <tskd08@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Check for i2c_algorithm structures that are only stored in
the algo field of an i2c_adapter structure. This field is
declared const, so i2c_algorithm structures that have this
property can be declared as const also.
This issue was identified using Coccinelle and the following
semantic patch:
@r disable optional_qualifier@
identifier i;
position p;
@@
static struct i2c_algorithm i@p = { ... };
@ok@
identifier r.i;
struct i2c_adapter e;
position p;
@@
e.algo = &i@p;
@bad@
position p != {r.p,ok.p};
identifier r.i;
@@
i@p
@depends on !bad disable optional_qualifier@
identifier r.i;
@@
static
+const
struct i2c_algorithm i = { ... };
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Check for i2c_algorithm structures that are only stored in
the algo field of an i2c_adapter structure. This field is
declared const, so i2c_algorithm structures that have this
property can be declared as const also.
This issue was identified using Coccinelle and the following
semantic patch:
@r disable optional_qualifier@
identifier i;
position p;
@@
static struct i2c_algorithm i@p = { ... };
@ok@
identifier r.i;
struct i2c_adapter e;
position p;
@@
e.algo = &i@p;
@bad@
position p != {r.p,ok.p};
identifier r.i;
@@
i@p
@depends on !bad disable optional_qualifier@
identifier r.i;
@@
static
+const
struct i2c_algorithm i = { ... };
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Check for i2c_algorithm structures that are only stored in
the algo field of an i2c_adapter structure. This field is
declared const, so i2c_algorithm structures that have this
property can be declared as const also.
This issue was identified using Coccinelle and the following
semantic patch:
@r disable optional_qualifier@
identifier i;
position p;
@@
static struct i2c_algorithm i@p = { ... };
@ok@
identifier r.i;
struct i2c_adapter e;
position p;
@@
e.algo = &i@p;
@bad@
position p != {r.p,ok.p};
identifier r.i;
@@
i@p
@depends on !bad disable optional_qualifier@
identifier r.i;
@@
static
+const
struct i2c_algorithm i = { ... };
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Check for i2c_algorithm structures that are only stored in
the algo field of an i2c_adapter structure. This field is
declared const, so i2c_algorithm structures that have this
property can be declared as const also.
This issue was identified using Coccinelle and the following
semantic patch:
@r disable optional_qualifier@
identifier i;
position p;
@@
static struct i2c_algorithm i@p = { ... };
@ok@
identifier r.i;
struct i2c_adapter e;
position p;
@@
e.algo = &i@p;
@bad@
position p != {r.p,ok.p};
identifier r.i;
@@
i@p
@depends on !bad disable optional_qualifier@
identifier r.i;
@@
static
+const
struct i2c_algorithm i = { ... };
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Check for i2c_algorithm structures that are only stored in
the algo field of an i2c_adapter structure. This field is
declared const, so i2c_algorithm structures that have this
property can be declared as const also.
This issue was identified using Coccinelle and the following
semantic patch:
@r disable optional_qualifier@
identifier i;
position p;
@@
static struct i2c_algorithm i@p = { ... };
@ok@
identifier r.i;
struct i2c_adapter e;
position p;
@@
e.algo = &i@p;
@bad@
position p != {r.p,ok.p};
identifier r.i;
@@
i@p
@depends on !bad disable optional_qualifier@
identifier r.i;
@@
static
+const
struct i2c_algorithm i = { ... };
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Check for i2c_algorithm structures that are only stored in
the algo field of an i2c_adapter structure. This field is
declared const, so i2c_algorithm structures that have this
property can be declared as const also.
This issue was identified using Coccinelle and the following
semantic patch:
@r disable optional_qualifier@
identifier i;
position p;
@@
static struct i2c_algorithm i@p = { ... };
@ok@
identifier r.i;
struct i2c_adapter e;
position p;
@@
e.algo = &i@p;
@bad@
position p != {r.p,ok.p};
identifier r.i;
@@
i@p
@depends on !bad disable optional_qualifier@
identifier r.i;
@@
static
+const
struct i2c_algorithm i = { ... };
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Check for i2c_algorithm structures that are only stored in
the algo field of an i2c_adapter structure. This field is
declared const, so i2c_algorithm structures that have this
property can be declared as const also.
This issue was identified using Coccinelle and the following
semantic patch:
@r disable optional_qualifier@
identifier i;
position p;
@@
static struct i2c_algorithm i@p = { ... };
@ok@
identifier r.i;
struct i2c_adapter e;
position p;
@@
e.algo = &i@p;
@bad@
position p != {r.p,ok.p};
identifier r.i;
@@
i@p
@depends on !bad disable optional_qualifier@
identifier r.i;
@@
static
+const
struct i2c_algorithm i = { ... };
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Check for i2c_algorithm structures that are only stored in
the algo field of an i2c_adapter structure. This field is
declared const, so i2c_algorithm structures that have this
property can be declared as const also.
This issue was identified using Coccinelle and the following
semantic patch:
@r disable optional_qualifier@
identifier i;
position p;
@@
static struct i2c_algorithm i@p = { ... };
@ok@
identifier r.i;
struct i2c_adapter e;
position p;
@@
e.algo = &i@p;
@bad@
position p != {r.p,ok.p};
identifier r.i;
@@
i@p
@depends on !bad disable optional_qualifier@
identifier r.i;
@@
static
+const
struct i2c_algorithm i = { ... };
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Check for i2c_algorithm structures that are only stored in
the algo field of an i2c_adapter structure. This field is
declared const, so i2c_algorithm structures that have this
property can be declared as const also.
This issue was identified using Coccinelle and the following
semantic patch:
@r disable optional_qualifier@
identifier i;
position p;
@@
static struct i2c_algorithm i@p = { ... };
@ok@
identifier r.i;
struct i2c_adapter e;
position p;
@@
e.algo = &i@p;
@bad@
position p != {r.p,ok.p};
identifier r.i;
@@
i@p
@depends on !bad disable optional_qualifier@
identifier r.i;
@@
static
+const
struct i2c_algorithm i = { ... };
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Check for i2c_algorithm structures that are only stored in
the algo field of an i2c_adapter structure. This field is
declared const, so i2c_algorithm structures that have this
property can be declared as const also.
This issue was identified using Coccinelle and the following
semantic patch:
@r disable optional_qualifier@
identifier i;
position p;
@@
static struct i2c_algorithm i@p = { ... };
@ok@
identifier r.i;
struct i2c_adapter e;
position p;
@@
e.algo = &i@p;
@bad@
position p != {r.p,ok.p};
identifier r.i;
@@
i@p
@depends on !bad disable optional_qualifier@
identifier r.i;
@@
static
+const
struct i2c_algorithm i = { ... };
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Check for i2c_algorithm structures that are only stored in
the algo field of an i2c_adapter structure. This field is
declared const, so i2c_algorithm structures that have this
property can be declared as const also.
This issue was identified using Coccinelle and the following
semantic patch:
@r disable optional_qualifier@
identifier i;
position p;
@@
static struct i2c_algorithm i@p = { ... };
@ok@
identifier r.i;
struct i2c_adapter e;
position p;
@@
e.algo = &i@p;
@bad@
position p != {r.p,ok.p};
identifier r.i;
@@
i@p
@depends on !bad disable optional_qualifier@
identifier r.i;
@@
static
+const
struct i2c_algorithm i = { ... };
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Check for i2c_algorithm structures that are only stored in
the algo field of an i2c_adapter structure. This field is
declared const, so i2c_algorithm structures that have this
property can be declared as const also.
This issue was identified using Coccinelle and the following
semantic patch:
@r disable optional_qualifier@
identifier i;
position p;
@@
static struct i2c_algorithm i@p = { ... };
@ok@
identifier r.i;
struct i2c_adapter e;
position p;
@@
e.algo = &i@p;
@bad@
position p != {r.p,ok.p};
identifier r.i;
@@
i@p
@depends on !bad disable optional_qualifier@
identifier r.i;
@@
static
+const
struct i2c_algorithm i = { ... };
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Check for i2c_algorithm structures that are only stored in
the algo field of an i2c_adapter structure. This field is
declared const, so i2c_algorithm structures that have this
property can be declared as const also.
This issue was identified using Coccinelle and the following
semantic patch:
@r disable optional_qualifier@
identifier i;
position p;
@@
static struct i2c_algorithm i@p = { ... };
@ok@
identifier r.i;
struct i2c_adapter e;
position p;
@@
e.algo = &i@p;
@bad@
position p != {r.p,ok.p};
identifier r.i;
@@
i@p
@depends on !bad disable optional_qualifier@
identifier r.i;
@@
static
+const
struct i2c_algorithm i = { ... };
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Check for i2c_algorithm structures that are only stored in
the algo field of an i2c_adapter structure. This field is
declared const, so i2c_algorithm structures that have this
property can be declared as const also.
This issue was identified using Coccinelle and the following
semantic patch:
@r disable optional_qualifier@
identifier i;
position p;
@@
static struct i2c_algorithm i@p = { ... };
@ok@
identifier r.i;
struct i2c_adapter e;
position p;
@@
e.algo = &i@p;
@bad@
position p != {r.p,ok.p};
identifier r.i;
@@
i@p
@depends on !bad disable optional_qualifier@
identifier r.i;
@@
static
+const
struct i2c_algorithm i = { ... };
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Return 0 instead of -EINVAL in get_frontend if no demod mode is active.
This fixes ie. dvb-fe-tool getting confused and assuming a DVBv3 FE on idle
frontends when the FE has been put to sleep using sleep().
Also, in read_status(), don't immediately return when no demod is active,
so the remaining code has a chance to clear the signal statistics.
Signed-off-by: Daniel Scheller <d.scheller@gmx.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Adds a stv0910_single modparm which, when set, configures the stv0910 to
run in single demodulator mode, currently intended for high bit rate
testing.
Signed-off-by: Daniel Scheller <d.scheller@gmx.net>
Tested-by: Richard Scobie <r.scobie@clear.net.nz>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
