This way the struct will use less memory, with better packing and no waste
due to unsigned long.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Differentiate between CSI-2 D-PHY and C-PHY. This does not yet include
support for C-PHY.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The parallel bus PLL calculation has no users. Remove it.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The VT divisor search can be ended if we've already found the value that
corresponds exactly the total divisor, as there are no better (lower)
values available.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Use the correct video timing divisor to calculate the SYS divisor. Instead
of the current value, the minimum was used. This could have resulted in a
too low SYS divisor.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The CCS spec supports a lot of variation in the PLL. Split the PLL in
front and back parts to better prepare for supporting it.
Also use CCS compliant naming for IP and OP PLL frequencies (i.e. include
"clk" in the name).
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
pll->pll_op_clk_freq is a 32-bit number. It does not need div_u64 to
divide it.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Fix a few new indentation warnings found with yamllint (now integrated
into the checks).
Cc: Ricardo Ribalda <ribalda@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> # For adv7604
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The 'disconnect' error injection functionality suffered from bit rot.
New device nodes were added without updating vivid_user_gen_s_ctrl(), so
that function had to be updated for the new device nodes.
Also, vivid didn't check if specific device nodes were actually ever
created, so the vivid_is_last_user() would fail on that (it would return
true instead of false in that case).
Finally, selecting Disconnect, then unbind the vivid driver would fail
since the remove() would think that the device nodes were already
unregistered. Keep track of whether disconnect was pressed and re-register
the device nodes in remove() before doing the real unregister.
[hverkuil: unsigned uses -> unsigned int uses]
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The VNCSI_IFMD register controls the data expansion mode and the
channel routing between the CSI-2 receivers and VIN instances.
According to the chip manual revision 2.20 not all fields are available
for all the SoCs:
- V3M, V3H and E3 do not support the DES1 field has they do not feature
a CSI20 receiver.
- D3 only supports parallel input, and the whole register shall always
be written as 0.
Inspect the per-SoC channel routing table where the available CSI-2
instances are reported and configure VNCSI_IFMD accordingly.
This patch supports this BSP change commit:
https://github.com/renesas-rcar/linux-bsp/commit/f54697394457
("media: rcar-vin: Fix VnCSI_IFMD register access for r8a77990")
[hverkuil: replace BSP commit ID with BSP URL]
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Suggested-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The GE2D is a 2D accelerator with various features like configurable
blitter with alpha blending, frame rotation, scaling, format conversion
and colorspace conversion.
The driver implements a Memory2Memory VB2 V4L2 streaming device permitting:
- 0, 90, 180, 270deg rotation
- horizontal/vertical flipping
- source cropping
- destination compositing
- 32bit/24bit/16bit format conversion
This adds the support for the GE2D version found in the AXG SoCs Family.
The missing features are:
- Source scaling
- Colorspace conversion
- Advanced alpha blending & blitting options
Is passes v4l2-compliance:
SHA: ea16a7ef13a902793a5c2626b0cefc4d956147f3, 64 bits, 64-bit time_t
[hverkuil: add missing linux/bitfield.h include]
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The GE2D is a 2D accelerator with various features like configurable blitter
with alpha blending, frame rotation, scaling, format conversion and colorspace
conversion.
This adds the bindings for the GE2D version found in the AXG SoCs Family.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Commit 31d9b9ef8564 ("media: cedrus: Register all codecs as capability")
makes separate capability flags for each codec. However, VP8 codec was
merged at the same time as mentioned patch, so there is no capability
flag for it.
This patch adds capability flag for VP8 and enables it for all variants
except for V3s.
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The gspca driver leaks memory when a probe fails. gspca_dev_probe2()
calls v4l2_device_register(), which takes a reference to the
underlying device node (in this case, a USB interface). But the
failure pathway neglects to call v4l2_device_unregister(), the routine
responsible for dropping this reference. Consequently the memory for
the USB interface and its device never gets released.
This patch adds the missing function call.
Reported-and-tested-by: syzbot+44e64397bd81d5e84cba@syzkaller.appspotmail.com
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
CC: <stable@vger.kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Planar pixel formats are documented in separate files. This duplicates
information, as those formats share comon traits. Consolidate them in a
single file and summarize their descriptions in a single table.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Semi-planar pixel formats are documented in separate files. This
duplicates information, as those formats share comon traits. Consolidate
them in a single file and summarize their descriptions in a single
table.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Luma-only pixel formats are documented in separate files. This
duplicates information, as those formats share comon traits. Consolidate
them in a single file and describe them in a single table.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Document the naming scheme for the existing packed YUV 4:4:4 formats, as
previously done for the RGB formats.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The 4:4:4 packed YUV formats are documented with a bit-level
representation, which creates a wide table. Switch to a byte-oriented
representation to make it more compact. This prepares for the addition
of formats with more than 8 bits per component, that would make the
table way too wide.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The padding bits are left blank, which look weird in the XYUV format,
and, worse, may lead to the VUYX format to be understand as consuming 3
bytes per pixel. Add 'X' for padding bits as we do for RGB formats.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The pixfmt-packed-yuv.rst file documents packed YUV 4:4:4 formats, but
is titled generically as "Packed YUV formats". 4:2:2 and 4:1:1 packed
YUV formats are documented in separate files, which can be confusing.
Group all packed YUV formats in pixfmt-packed-yuv.rst, which allows
documenting the 4:2:2 formats in a more concise way.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Document YUV subsampling, including chroma spatial siting, and replace
the siting examples in individual formats by references to the common
documentation.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Using '-' to represent padding bits and bytes make text and tables more
difficult to read. Use 'x' and 'X' instead.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
All formats using 8 bits per component can be described with a byte
granularity instead of a bit granularity without loss of precision. This
makes the corresponding table more compact and easier to read.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The naming scheme for the RGB pixel formats has been developed
organically, and isn't consistent between formats using less than 8 bits
per pixels (mostly stored in 1 or 2 bytes per pixel, except for RGB666
that uses 4 bytes per pixel) and formats with 8 bits per pixel (stored
in 3 or 4 bytes). For the latter category, the names use a components
order convention that is the opposite of the first category, and the
opposite of DRM pixel formats. This has led to lots of confusion in the
past, and would really benefit from being explained more precisely. Do
so, which also prepares for the addition of additional RGB pixels
formats.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Improve readability of the documentation by adding a section title for
the deprecated formats.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The packed RGB formats documentation includes a layout table without any
context. This doesn't bring much useful information, and is confusing at
best. Remove it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
V4L2_PIX_FMT_HM12 is a YUV semi-planar macro-block format. Move it from
the packed YUV formats section where it was misplaced to the YUV
semi-planar formats section.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
V4L2_PIX_FMT_HI240 is a 8-bit dithered RGB format specific to BTTV. Move
it from the packed YUV formats section where it was misplaced to the
vendor-specific formats section.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The V4L2_PIX_FMT_BGRA444 format has a comment that explains why its 4CC
value is GA12. This explains the development history and isn't of much
interest to readers, it should have been part of a commit message
instead. Drop the comment, anyone interested in history can turn to git.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
rval wasn't set, resulting in probe returning zero instead of an error.
Fixes: de10c1619c ("[media] smiapp: Get clock rate if it's not available through DT")
Reported-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
There is no intialization for the 'reg' variable, so printing
it produces undefined behavior as well as a compile-time warning:
drivers/media/i2c/ccs/ccs-core.c:314:49: error: variable 'reg' is uninitialized when used here [-Werror,-Wuninitialized]
"0x%8.8x %s pixels: %d %s (pixelcode %u)\n", reg,
Remove the variable and stop printing it.
Fixes: fd9065812c ("media: smiapp: Obtain frame descriptor from CCS limits")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Clang points out that the error handling in ov02a10_s_stream() is
broken, and just returns a random error code:
drivers/media/i2c/ov02a10.c:537:6: warning: variable 'ret' is used uninitialized whenever 'if' condition is true [-Wsometimes-uninitialized]
if (ov02a10->streaming == on)
^~~~~~~~~~~~~~~~~~~~~~~~
drivers/media/i2c/ov02a10.c:568:9: note: uninitialized use occurs here
return ret;
^~~
drivers/media/i2c/ov02a10.c:537:2: note: remove the 'if' if its condition is always false
if (ov02a10->streaming == on)
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
If streaming is already on, leave it that way and return success.
Suggested-by: Dongchun Zhu <dongchun.zhu@mediatek.com>
Fixes: 91807efbe8 ("media: i2c: add OV02A10 image sensor driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
This reverts commit f61eb7bc92.
While aligning with the OF graph schema will be done for the media DT
bindings, this patch got merged a little too hastily. Revert it for now.
Suggested-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Add a keymap for the pine64 IR remote [0]. The mouse key has been mapped to
KEY_EPG to provide a more useful remote.
[0] http://files.pine64.org/doc/Pine%20A64%20Schematic/remote-wit-logo.jpg
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
With Sphinx 2.x: those two warnings are produced:
/devel/v4l/docs/sphinx2/Documentation/output/videodev2.h.rst:6: WARNING: undefined label: v4l2-meta-fmt-rk-isp1-params (if the link has no caption the label must precede a section header)
/devel/v4l/docs/sphinx2/Documentation/output/videodev2.h.rst:6: WARNING: undefined label: v4l2-meta-fmt-rk-isp1-stat-3a (if the link has no caption the label must precede a section header)
The reason is that there's no blank line between the two
identifiers.
Fixes: 3f46cac678 ("media: admin-guide/pixfmt-meta-rkisp1.rst: pixfmt reference conforming with macro")
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Document V4L2_CTRL_TYPE_FWHT_PARAMS and p_fwht_params. Also
improve the V4L2_PIX_FMT_FWHT_STATELESS description.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Add 'struct' to clarify that these are pointers to structs.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Drop the 'bullets' for the HEVC stateless codec documentation.
It doesn't work, and they just show up as asterisks.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Move the documentation for the stateless FWHT codec to
ext-ctrls-codec-stateless.rst since that is the proper place
for the stable stateless API documentation.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The FWHT stateless 'uAPI' was staging and marked explicitly in the
V4L2 specification that it will change and is unstable.
Note that these control IDs were never exported as a public API,
they were only defined in kernel-local headers (fwht-ctrls.h).
Now, the FWHT stateless controls is ready to be part
of the stable uAPI.
While not too late:
- Rename V4L2_CID_MPEG_VIDEO_FWHT_PARAMS to V4L2_CID_STATELESS_FWHT_PARAMS.
- Move the contents of fwht-ctrls.h to v4l2-controls.h.
- Move the public parts of drivers/media/test-drivers/vicodec/codec-fwht.h
to v4l2-controls.h.
- Add V4L2_CTRL_TYPE_FWHT_PARAMS control initialization and validation.
- Add p_fwht_params to struct v4l2_ext_control.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The FWHT stateless 'uAPI' was staging and marked explicitly in the
V4L2 specification that it will change and is unstable.
Note that these control IDs were never exported as a public API,
they were only defined at the driver's code.
While not too late, let's rename them is preparation for promoting
the stateless FWHT codec API as a public API.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The v4l2_area struct was not documented in the media documentation,
which meant that references to that struct elsewhere in the documentation
never linked to anything.
[mchehab: remove .. cssclass:: longtable]
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Fix warnings from make htmlddocs:
Documentation/output/videodev2.h.rst:6: WARNING: undefined label: v4l2-meta-fmt-rk-isp1-params (if the link has no caption the label must precede a section header)
Documentation/output/videodev2.h.rst:6: WARNING: undefined label: v4l2-meta-fmt-rk-isp1-stat-3a (if the link has no caption the label must precede a section header)
Fixes: df22026aeb ("media: videodev2.h, v4l2-ioctl: add rkisp1 meta buffer format")
Signed-off-by: Helen Koike <helen.koike@collabora.com>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Now that we've destaged the H264 stateless codec controls,
and with all the pieces in place, update the documentation
and move it to its own section.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The H.264 stateless 'uAPI' was staging and marked explicitly in the
V4L2 specification that it will change and is unstable.
Note that these control IDs were never exported as a public API,
they were only defined in kernel-local headers (h264-ctrls.h).
Now, the H264 stateless controls is ready to be part
of the stable uAPI.
While not too late, let's rename them and re-number their
control IDs, moving them to the newly created stateless
control class, and updating all the drivers accordingly.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Tested-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
For now, only print the type of the control. In the future,
we might want to be able to print the values of all
the stateless codec controls currently set in the control handler,
which should be useful for debugging reasons.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Move the H264 stateless control types out of staging,
and re-number them to avoid any confusion.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Tested-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
When V4L2_CTRL_TYPE_H264_PRED_WEIGHTS was added, adding a replace
symbol directive in videodev2.h.rst.exceptions was missed.
Now that the control type is destaged, it's important to fix this.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
