Commit Graph

5238 Commits

Author SHA1 Message Date
Devin Heitmueller
cdf7bfa892 V4L/DVB (12100): em28xx: make sure the analog GPIOs are set if we used a card hint
In cases where the board had a default USB ID, we would not indentify the
board until after the call to em28xx_set_mode().  As a result, for those
boards the analog GPIOs were not being set before probing the i2c bus for
devices (the probe would occur with the GPIOs being all high).

Make a call to em28xx_set_mode() so that the GPIOs are set properly before
probing the i2c bus for devices.

This problem was detected with the EVGA inDtube, where the tvp5150 is not
powered on unless GPIO1 is pulled low.

Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-23 03:14:16 -03:00
Igor M. Liplianin
f867c3f4ea V4L/DVB (12098): Create table for customize stv0900 ts registers.
Signed-off-by: Igor M. Liplianin <liplianin@netup.ru>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-23 03:14:12 -03:00
Igor M. Liplianin
0cde9b2533 V4L/DVB (12095): Change lnbh24 configure bits for NetUP card.
Signed-off-by: Igor M. Liplianin <liplianin@netup.ru>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-23 03:13:59 -03:00
Hans de Goede
3fb4a57b49 V4L/DVB (12093): gspca_sonixj: Name saturation control saturation, not color
Name saturation control saturation, not color and make the default
less saturated (the old default was overdoing it).

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-23 03:13:57 -03:00
Hans de Goede
f800952c21 V4L/DVB (12092): gspca_sonixj + ov7630: invert vflip control instead of changing default
gspca_sonixj + ov7630 had the default value for flip enabled, as otherwise
the picture is upside down. It is better to instead invert the meaning
of the control in the set function, and have the default be no vflip,
as one would expect vflip enabled to be upside down.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-23 03:13:54 -03:00
Hans de Goede
37c6dbe290 V4L/DVB (12091): gspca_sonixj: Add light frequency control
gspca_sonixj: Add light frequency control

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-23 03:13:49 -03:00
Hans de Goede
1fec747cd3 V4L/DVB (12090): gspca_sonixj: enable autogain control for the ov7620
gspca_sonixj: enable autogain control for the ov7620, and not only
make it enable autogain but also auto exposure (and do the
same for the ov7648).

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-23 03:13:45 -03:00
Hans de Goede
a5d1cc39fe V4L/DVB (12089): gspca_sonixj: increase 640x480 frame-buffersize
gspca_sonixj: increase 640x480 frame-buffersize, as I was getting buffer
overflows during my testing of a "Premier" 0c45:613e cam

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-23 03:13:38 -03:00
Hans de Goede
119893b2df V4L/DVB (12088): Mark the v4l1 uvcvideo quickcam messenger driver as deprecated
Mark the v4l1 uvcvideo quickcam messenger driver as deprecated, the one
cam it supports, is now also supported by the v4l2 gspca stv06xx driver.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-23 03:13:33 -03:00
Hans de Goede
cc7b5b573f V4L/DVB (12087): gspca_sonixj: enable support for 0c45:613e camera
gspca_sonixj: enable support for 0c45:613e camera, and slightly tweak
the ov7630 register init values for a much better picture.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-23 03:13:29 -03:00
Hans de Goede
9764398bde V4L/DVB (12086): gspca_sonixj: Fix control index numbering
The control index defines for the gspca_sonixj driver were numbered
wrong, causing us to disable the wrong controls on various sensors

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-23 03:13:26 -03:00
Hans de Goede
e080fcd929 V4L/DVB (12085): gspca_ov519: constify ov518 inititial register value tables
gspca_ov519: constify ov518 inititial register value tables

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-23 03:13:22 -03:00
Hans de Goede
0220f8870e V4L/DVB (12084): ov511: mark as deprecated
Mark the v4l1 ov511 as deprecated as we now have ov511 support in
the gspca ov519 driver. Note we should really also keep track of this
in Documentation/feature-removal-schedule.txt, but that is not
part of the v4l-dvb tree.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-23 03:13:18 -03:00
Hans de Goede
98b1e9be88 V4L/DVB (12083): ov511: remove ov518 usb id's from the driver
ov511: remove ov518 usb id's from the driver, as they have not been working
ever since the decompression code got removed from the kernel, and they
are no supported by the gspca_ov519 module.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-23 03:13:16 -03:00
Hans de Goede
8668d504d7 V4L/DVB (12082): gspca_stv06xx: Add support for st6422 bridge and sensor
Add support for st6422 bridge and sensor to the stv06xx gspca sub driver,
tested with:
Logitech QuickCam Messenger     046d:08f0       ST6422  integrated
Logitech QuickCam Mess. Plus    046d:08f6       ST6422  integrated

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-23 03:13:11 -03:00
Hans de Goede
ae49c40461 V4L/DVB (12081): gspca_ov519: Cleanup some sensor special cases
gspca_ov519: Cleanup some sensor special cases

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-23 03:12:50 -03:00
Hans de Goede
b282d87332 V4L/DVB (12080): gspca_ov519: Fix ov518+ with OV7620AE (Trust spacecam 320)
gspca_ov519: Fix ov518+ with OV7620AE (Trust spacecam 320)

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-23 03:12:47 -03:00
Hans de Goede
1876bb923c V4L/DVB (12079): gspca_ov519: add support for the ov511 bridge
gspca_ov519: add support for the ov511 bridge

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-23 03:12:37 -03:00
Hans de Goede
f5cee95c2e V4L/DVB (12078): gspca_ov519: Better default contrast for ov6630
Hmm, another one with an extra if (life sucks) the
default contrast really is no good for the ov6630, it
isn't even high enough in full daylight, this gives
the ov6630 a different initial value for a better out
of the box experience.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-23 03:12:32 -03:00
Hans de Goede
80142efa71 V4L/DVB (12077): gspca_ov519: Fix 320x240 with ov7660 sensor
As reported on the ov51x-jpeg list, and as I can confirm with my own cam
the ov7670 in 320x240 has a number of broken columns of pixels
at the left of the picture. This was not present in the old
driver as it always used 640x480 and did software
downscaling (took me a while to figure that one out).
The fix adds a sensor specific if in so far sensor
neutral code :( But this is the only way to fix this,
this cannot be fixed by only changing sensor registers.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-23 03:12:08 -03:00
Hans de Goede
9e4d825881 V4L/DVB (12076): gspca_ov519: Fix led inversion with some cams
My ov519 cam has it led inverted, the same has been
reported on the ov51x-jpeg list for another
creative cam. This patch fixes this without changing
the behaviour for other cams.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-23 03:11:49 -03:00
Hans de Goede
92918a53ee V4L/DVB (12075): gspca_ov519: check ov518 packet numbers
Check ov518 packet numbers to detect dropped packets.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-23 03:11:40 -03:00
Hans de Goede
124cc9c0c8 V4L/DVB (12074): gspca_ov519: Add 320x240 and 160x120 support for cif sensor cams
gspca_ov519: Add 320x240 and 160x120 support for cif sensor cams

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-23 03:11:24 -03:00
Hans de Goede
7d9713735d V4L/DVB (12073): gspca_ov519: limit ov6630 qvif uv swap fix to ov66308AF
The fix for the UV swapping in qcif mode with the ov6630, which I did
to fix this issue on a ov518 cam with an ov66308AF, causes UV swapping in
qcif with another cam of mine with the ov518 and an ov66308AE, so this
patch changes the code to differentiate between the ov66308AF and other
ov6630 versions, and restricts the UV swap fix to the ov66308AF.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-23 03:11:20 -03:00
Hans de Goede
02ab18b0f4 V4L/DVB (12072): gspca-ov519: add extra controls
This patch adds autobrightness (so that it can
be turned off to make the already present brightness
control work) and light frequency filtering controls.

The lightfreq control needed 2 different entries
in the ctrls array, as the number of options differs
depending on the sensor. Always one of the 2 entires is
disabled ofcourse.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-23 03:11:16 -03:00
Hans de Goede
b8bfb5fb34 V4L/DVB (12071): gspca: fix NULL pointer deref in query_ctrl
gspca: fix NULL pointer deref in query_ctrl

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-23 03:11:07 -03:00
Mauro Carvalho Chehab
14422f9dd8 V4L/DVB (12010): cx88: Properly support Leadtek TV2000 XP Global
Fix Leadtek TV2000 XP Global entries and add missing PCI ID's.

Thanks to Terry Wu <terrywu2009@gmail.com> for pointing us for the proper settings.

Cc: Terry Wu <terrywu2009@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-23 03:10:05 -03:00
Guennadi Liakhovetski
0a861e9eb7 soc-camera: unify i2c camera device platform data
Unify i2c camera device platform data to point to struct soc_camera_link
for a smooth transition to soc-camera as a platform driver.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-17 16:22:34 +09:00
Linus Torvalds
0dd5198672 Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (425 commits)
  V4L/DVB (11870): gspca - main: VIDIOC_ENUM_FRAMESIZES ioctl added.
  V4L/DVB (12004): poll method lose race condition
  V4L/DVB (11894): flexcop-pci: dmesg visible names broken
  V4L/DVB (11892): Siano: smsendian - declare function as extern
  V4L/DVB (11891): Siano: smscore - bind the GPIO SMS protocol
  V4L/DVB (11890): Siano: smscore - remove redundant code
  V4L/DVB (11889): Siano: smsdvb - add DVB v3 events
  V4L/DVB (11888): Siano: smsusb - remove redundant ifdef
  V4L/DVB (11887): Siano: smscards - add board (target) events
  V4L/DVB (11886): Siano: smscore - fix some new GPIO definitions names
  V4L/DVB (11885): Siano: Add new GPIO management interface
  V4L/DVB (11884): Siano: smssdio - revert to stand alone module
  V4L/DVB (11883): Siano: cards - add two additional (USB) devices
  V4L/DVB (11824): Siano: smsusb - change exit func debug msg
  V4L/DVB (11823): Siano: smsusb - fix typo in module description
  V4L/DVB (11822): Siano: smscore - bug fix at get_device_mode
  V4L/DVB (11821): Siano: smscore - fix isdb-t firmware name
  V4L/DVB (11820): Siano: smscore - fix byte ordering bug
  V4L/DVB (11819): Siano: smscore - fix get_common_buffer bug
  V4L/DVB (11818): Siano: smscards - assign gpio to HPG targets
  ...
2009-06-16 21:15:42 -07:00
Linus Torvalds
517d08699b Merge branch 'akpm'
* akpm: (182 commits)
  fbdev: bf54x-lq043fb: use kzalloc over kmalloc/memset
  fbdev: *bfin*: fix __dev{init,exit} markings
  fbdev: *bfin*: drop unnecessary calls to memset
  fbdev: bfin-t350mcqb-fb: drop unused local variables
  fbdev: blackfin has __raw I/O accessors, so use them in fb.h
  fbdev: s1d13xxxfb: add accelerated bitblt functions
  tcx: use standard fields for framebuffer physical address and length
  fbdev: add support for handoff from firmware to hw framebuffers
  intelfb: fix a bug when changing video timing
  fbdev: use framebuffer_release() for freeing fb_info structures
  radeon: P2G2CLK_ALWAYS_ONb tested twice, should 2nd be P2G2CLK_DAC_ALWAYS_ONb?
  s3c-fb: CPUFREQ frequency scaling support
  s3c-fb: fix resource releasing on error during probing
  carminefb: fix possible access beyond end of carmine_modedb[]
  acornfb: remove fb_mmap function
  mb862xxfb: use CONFIG_OF instead of CONFIG_PPC_OF
  mb862xxfb: restrict compliation of platform driver to PPC
  Samsung SoC Framebuffer driver: add Alpha Channel support
  atmel-lcdc: fix pixclock upper bound detection
  offb: use framebuffer_alloc() to allocate fb_info struct
  ...

Manually fix up conflicts due to kmemcheck in mm/slab.c
2009-06-16 19:50:13 -07:00
Magnus Damm
720b17e759 videobuf-dma-contig: zero copy USERPTR support
Since videobuf-dma-contig is designed to handle physically contiguous
memory, this patch modifies the videobuf-dma-contig code to only accept a
user space pointer to physically contiguous memory.  For now only
VM_PFNMAP vmas are supported, so forget hotplug.

On SuperH Mobile we use this with our sh_mobile_ceu_camera driver together
with various multimedia accelerator blocks that are exported to user space
using UIO.  The UIO kernel code exports physically contiguous memory to
user space and lets the user space application mmap() this memory and pass
a pointer using the USERPTR interface for V4L2 zero copy operation.

With this approach we support zero copy capture, hardware scaling and
various forms of hardware encoding and decoding.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Magnus Damm <damm@igel.co.jp>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Paul Mundt <lethal@linux-sh.org>
Acked-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Cc: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-16 19:47:40 -07:00
Hans de Goede
11c635a25b V4L/DVB (11870): gspca - main: VIDIOC_ENUM_FRAMESIZES ioctl added.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 19:14:44 -03:00
Figo.zhang
9fd6418a6a V4L/DVB (12004): poll method lose race condition
bttv-driver.c,cx23885-video.c,cx88-video.c: poll method lose race condition for capture video.

Signed-off-by: Figo.zhang <figo1802@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 19:14:44 -03:00
Miroslav Sustek
7561300a7c V4L/DVB (11441): cx88-dsp: fixing 64bit math
cx88-dsp: fixing 64bit math on 32bit kernels

Some gcc versions report the missing of __divdi3

[mchehab.redhat.com: CodingStyle fixes]

Signed-off-by: Miroslav Sustek <sustmidown@centrum.cz>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 19:14:19 -03:00
Marton Balint
2325a6b986 V4L/DVB (11396): cx88: avoid reprogramming every audio register on A2 stereo/mono change
This patch changes cx88_set_stereo to avoid resetting all of the audio
registers on stereo/mono change if the audio standard is A2, and set
only the AUD_CTL register. The benefit of this method is that it
eliminates the annoying clicking noise on setting the audio mode to
stereo or mono.

The driver had used the same method 1.5 years ago (and for FM radio it
still does), but a pretty big cleanup commit changed it to the
"complete audio reset" method, although the reason for this move was
not clear. (If somebody knows why it was necessary, please let me
know!)

The original commit: http://linuxtv.org/hg/v4l-dvb/rev/ffe313541d7d

Signed-off-by: Marton Balint <cus@fazekas.hu>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 19:14:18 -03:00
Marton Balint
083d6f8c81 V4L/DVB (11395): cx88: audio thread: if stereo detection is hw supported don't do it manually
The sole purpose of the audio thread is to detect if stereo transmission is
available, and if it is, then switch to stereo mode (and switch back, if it's
no longer available). This manual autodetection is useful for some audio
standards (e.g. A2) where cx88_get_stereo CAN detect stereo sound, but the
cx2388x chip CANNOT auto-detect stereo sound.

However, for other audio standards, the cx2388x chip CAN auto-detect the stereo
sound, so the manual autodetection in the audio thread is not needed. In fact,
it can cause serious problems because for some of these audio standards,
cx88_get_stereo CANNOT detect the presence of stereo sound.  Besides that, if
the hardware automatically detects stereo/mono sound, you cannot set
core->audiomode_current to the real current audio mode on channel change.

With this patch, the manual autodetection is only used if audiomode_current is
known after a channel change (because of the initial mono mode), and
hardware-based stereo autodetecion is not applicable for the current audio
standard.

Signed-off-by: Marton Balint <cus@fazekas.hu>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 19:14:18 -03:00
Marton Balint
e878cf3a47 V4L/DVB (11394): cx88: Add support for stereo and sap detection for A2
The patch implements reliable stereo and sap detection for the A2 sound
standard.  This is achieved by processing the samples of the audio RDS fifo of
the cx2388x chip. A2M, EIAJ and BTSC stereo/sap detection is also possible with
this new approach, but it's not implemented yet. Stereo detection when alsa
handles the sound also does not work yet.

Signed-off-by: Marton Balint <cus@fazekas.hu>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 19:14:17 -03:00
Devin Heitmueller
06f837cadb V4L/DVB (11784): cx88: Fix race condition between cx8800 startup and hald
A power management fix to properly put the xc5000 into low power mode
revealed a race condition where hald could detect the creation of the device
file and connect to the device while the initial device configuration is
still in progress.

Lock the core structure so that video_release cannot be called and put the
tuner to sleep in the middle of the initial call to cx88_set_tvnorm() in
cx8800_initdev()

Thanks to Michael Krufky for discovering the issue and providing an
environment to test in.

Cc: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 19:14:13 -03:00
Dean Anderson
b02064caeb V4L/DVB (11738): patch: s2255drv: urb completion routine fixes
Error count in read pipe completion corrected.
URB not resubmitted if shutting down.
URB not freed in completion routine if new urb_submit_fails.
(URB is freed on shutdown).

Signed-off-by: Dean Anderson <dean@sensoray.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 19:14:12 -03:00
Robert Krakora
1fcbcc47d3 V4L/DVB (12002): uvc: Fix for no return value check of uvc_ctrl_set() which calls mutex_lock_interruptible()
Fix for no return value check of uvc_ctrl_set() which calls
mutex_lock_interruptible().

Signed-off-by: Robert Krakora <rob.krakora@messagenetsystems.com>
Acked-by: Laurent Pinchart <laurent.pinchart@skynet.be>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 19:07:57 -03:00
Alan Cox
aae40fd219 V4L/DVB (11998): se401: Fix coding style
Having fixed the sprintfs I decided a quick clean wouldn't do any harm so
it was actually easy to read in future.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 19:07:54 -03:00
Alexey Klimov
226a040e6a V4L/DVB (11997): gspca - stv06xx: remove needless if check and goto
Patch removes needless if check and goto.

Signed-off-by: Alexey Klimov <klimov.linux@gmail.com>
Reviewed-by: Erik Andrén <erik.andren@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 19:07:54 -03:00
Barry Kitson
27049dc301 V4L/DVB (11996): saa7134: add support for AVerMedia M103 (f736)
Add 1461:f736 to the list of identifiers corresponding to the
SAA7134_BOARD_AVERMEDIA_M103 board.  This patch adds support for
a variant of the AVerMedia M103 MiniPCI DVB-T Hybrid card.

Signed-off-by: Barry Kitson <b.kitson@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 19:07:53 -03:00
Figo.zhang
de99d76aa1 V4L/DVB (11995): zr364xx.c: vfree does its own NULL check
vfree() does it's own NULL checking, no need for explicit check before
calling it.

Signed-off-by: Figo.zhang <figo1802@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 19:07:53 -03:00
Lennart Poettering
52a85e1709 V4L/DVB (11993): V4L/pwc - use usb_interface as parent, not usb_device
The current code creates a sysfs device path where the video4linux
device is child of the usb device itself instead of the interface it
belongs to. That is evil and confuses udev.

This patch does basically the same thing as Kay's similar patch for the
ov511 driver:

at git commit ce96d0a44a

Signed-off-by: Lennart Poettering <mzxreary@0pointer.de>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 19:07:52 -03:00
Jean Delvare
e36bc31f82 V4L/DVB (11992): Add missing __devexit_p()
Add missing __devexit_p() to several drivers. Also add a few missing
__init, __devinit and __exit markers. These errors could result in
build failures depending on the kernel configuration.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 19:07:51 -03:00
Figo.zhang
96ceea2734 V4L/DVB (11991): buf-core.c: add pointer check
add poiter check for videobuf_queue_core_init().

any guys who write a v4l driver, pass a NULL pointer or a non-inintial
pointer to the first parameter such as videobuf_queue_sg_init() , it
would be crashed.

Signed-off-by: Figo.zhang <figo1802@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 19:07:51 -03:00
figo.zhang
d5709a0e3d V4L/DVB (11990): saa7134-video.c: fix the block bug
when re-open or re-start (video_streamon), the q->curr would not be NULL in saa7134_buffer_queue(),
and all the qbuf will add to q->queue list,no one to do activate to start DMA,and then no interrupt
would happened,so it will be block.

In VIDEOBUF_NEEDS_INIT state, initialize the curr pointer to be NULL in the buffer_prepare().

Signed-off-by: Figo.zhang <figo.zhang@kolorific.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 19:07:50 -03:00
Devin Heitmueller
1cdc6392b7 V4L/DVB (11979): em28xx: don't create audio device if not supported
In cases where the device does not actually provide a USB audio class *or*
vendor audio, do not load the driver that provides vendor audio support (such
as the KWorld 2800d).  Otherwise, the /dev/audio1 device file gets created and
users get confused.

Also, reworks the logic a bit so that we don't try to inspect the register
content if the register read failed entirely.

Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 19:07:46 -03:00
Franklin Meng
d7de5d8ff7 V4L/DVB (11977): em28xx: Add Kworld 315 entry
Added an entry for Kworld 315 (for while, dvb only)

Signed-off-by: Franklin Meng <fmeng2002@yahoo.com>
Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 19:07:45 -03:00