We no longer need code that was introduced to differentiate
between two early versions of 8260.
We can remove this convoluted way to get the hardware version
that was needed because of a bug in the register's
configuration.
Moreover, since we no longer need to access the PRPH
registers, we no longer need to wake up the device,
request ownership, etc...
Remove all that.
This allows us to get the rid of the obsolete comment
about the AUX bus MISC address space which should have
been moved when this code was moved away from here.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20201209231352.4a5665ccd8a6.Iff3879405c15758ba661c430e77dc2160ddada1c@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
ofdm_index[] is used to indicate how many power compensation is needed to
current thermal value. For internal PA module or 2.4G band, the min_index
is different from other cases.
This issue originally is reported by Dan. He found the size of ofdm_index[]
is 2, but access index 'i' may be equal to 2 if 'rf' is 2 in case of
'is2t'.
In fact, the chunk of code is added to wrong place, so move it back to
proper place, and then power compensation and buffer overflow are fixed.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20201207031903.7599-1-pkshih@realtek.com
mt76 patches for 5.11
* mt7915 fixes
* mt7615 fixes
* support for more sta interfaces on mt7615/mt7915
* mt7915 encap offload
* performance improvements
* channel noise report on mt7915
* usb/sdio support improvements
* mt7915 testmode support
* mt7915 DBDC support
* warning fixes
When 8822CE is associating with AP, driver will poll status bit of
IQ calibration to confirm the IQ calibration is done, and then move on
the association process. Current polling time for IQ calibration is 6
seconds.
But occasionally driver fails in polling the status bit because the status
bit is not set after IQ calibration is done. When it happends, association
process will be serieously delayed up to 6 seconds. To avoid it, we reduce
polling time to 300ms, in which the IQ calibration can be done.
Signed-off-by: Chin-Yen Lee <timlee@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20201208014503.12118-1-pkshih@realtek.com
'const struct dev_pm_ops rtw_pm_ops' is declared by pci.c, and it should be
declare as 'extern' in pci.h. Without 'extern' causes every file including
pci.h has an individual instance of rtw_pm_ops but not reference to the one
declared in pci.c
If kernel config, like test robot, doesn't build driver as module, it leads
multiple definition.
Reported-by: kernel test robot <lkp@intel.com>
Fixes: 2e86ef413a ("rtw88: pci: Add prototypes for .probe, .remove and .shutdown")
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20201208013746.11065-1-pkshih@realtek.com
When driver was developed, FCC regulation didn't enable channel 144
and there was no demand for channel 144 at that time. Although HW
actually supports channel 144, driver didn't announce channel 144.
Therefore, channel 144 (20 MHz), channel 142 (40 MHz) and channel
138 (80 MHz) couldn't be used.
Today, channel 144 has been enabled by regulations and
is gradually being supported. With test requirements,
we declare hw supports channel 144.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20201204013823.3729-1-pkshih@realtek.com
Also strip out other duplicates from driver specific headers.
Ensure 'main.h' is explicitly included in 'pci.h' since the latter
uses some defines from the former. It avoids issues like:
from drivers/net/wireless/realtek/rtw88/rtw8822be.c:5:
drivers/net/wireless/realtek/rtw88/pci.h:209:28: error: ‘RTK_MAX_TX_QUEUE_NUM’ undeclared here (not in a function); did you mean ‘RTK_MAX_RX_DESC_NUM’?
209 | DECLARE_BITMAP(tx_queued, RTK_MAX_TX_QUEUE_NUM);
| ^~~~~~~~~~~~~~~~~~~~
Fixes the following W=1 kernel build warning(s):
drivers/net/wireless/realtek/rtw88/pci.c:1488:5: warning: no previous prototype for ‘rtw_pci_probe’ [-Wmissing-prototypes]
1488 | int rtw_pci_probe(struct pci_dev *pdev,
| ^~~~~~~~~~~~~
drivers/net/wireless/realtek/rtw88/pci.c:1568:6: warning: no previous prototype for ‘rtw_pci_remove’ [-Wmissing-prototypes]
1568 | void rtw_pci_remove(struct pci_dev *pdev)
| ^~~~~~~~~~~~~~
drivers/net/wireless/realtek/rtw88/pci.c:1590:6: warning: no previous prototype for ‘rtw_pci_shutdown’ [-Wmissing-prototypes]
1590 | void rtw_pci_shutdown(struct pci_dev *pdev)
| ^~~~~~~~~~~~~~~~
Cc: Yan-Hsuan Chuang <yhchuang@realtek.com>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20201126133152.3211309-18-lee.jones@linaro.org
Ido Schimmel says:
====================
mlxsw: Misc updates
This patchset contains miscellaneous patches we gathered in our queue.
Some of them are dependencies of larger patchsets that I will submit
later this cycle.
Patches #1-#3 perform small non-functional changes in mlxsw.
Patch #4 adds more extended ack messages in mlxsw.
Patch #5 adds devlink parameters documentation for mlxsw. To be extended
with more parameters this cycle.
Patches #6-#7 perform small changes in forwarding selftests
infrastructure.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Turned out that mlxsw_sp_ipip_fib_entry_op_gre4() does not need to
figure out the IP address and virtual router id. Those are exactly
the same as in the fib_entry it is called for. So just use that and
reduce mlxsw_sp_ipip_fib_entry_op_gre4() function to only call
mlxsw_sp_ipip_fib_entry_op_gre4_rtdp() make the ipip decap op
code similar to nve.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The indicated version fixes an issue whereby the MOMTE register would by
default enable mirroring of ECN-marked traffic from all traffic classes,
once the ECN mirroring was configured. This fix is necessary for offload
of RED "ecn_mark" qevent.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Suppresses the following coccinelle warning:
drivers/net/ethernet/mellanox/mlxsw/core_acl_flex_keys.c:139:3-7:
WARNING use flexible-array member instead
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Suppresses the following coccinelle warning:
drivers/net/ethernet/mellanox/mlxsw/spectrum_mr.c:18:15-19: WARNING use flexible-array member instead
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, mlxsw triggers the 'devlink:devlink_hwmsg' tracepoint
whenever a request is sent to the device and whenever a response is
received from it. However, the tracepoint is not triggered when an event
(e.g., port up / down) is received from the device.
Also trace EMAD events in order to log a more complete picture of all
the exchanged hardware messages.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Test that the reference count of a router interface (RIF) configured for
a LAG is incremented / decremented when ports join / leave the LAG. Use
the offload indication on routes configured on the RIF to understand if
it was created / destroyed.
The test fails without the previous patch.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In case a router interface (RIF) is configured for a LAG, make sure its
configuration is applied on the new LAG member.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Heiner Kallweit says:
====================
r8169: improve rtl_rx and NUM_RX_DESC handling
This series improves rtl_rx() and the handling of NUM_RX_DESC.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
After recent changes there's no need any longer to define NUM_RX_DESC
as an unsigned value.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There's no need to check min(budget, NUM_RX_DESC). At first budget
(NAPI_POLL_WEIGHT = 64) is less then NUM_RX_DESC (256).
And more important: Even in case of budget > NUM_RX_DESC we could
safely continue processing descriptors as long as they are owned by
the CPU. In addition replace rx_left with a normal counter variable,
this allows to simplify the code. Last but not least there's no need
any longer to pass the budget as an u32.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Simon Wunderlich says:
====================
This cleanup patchset includes the following patches:
- bump version strings, by Simon Wunderlich
- update include for min/max helpers, by Sven Eckelmann
- add infrastructure and netlink functions for routing algo selection,
by Sven Eckelmann (2 patches)
- drop deprecated debugfs and sysfs support and obsoleted
functionality, by Sven Eckelmann (3 patches)
- drop unused include in fragmentation.c, by Simon Wunderlich
* tag 'batadv-next-pullrequest-20201204' of git://git.open-mesh.org/linux-merge:
batman-adv: Drop unused soft-interface.h include in fragmentation.c
batman-adv: Drop legacy code for auto deleting mesh interfaces
batman-adv: Drop deprecated debugfs support
batman-adv: Drop deprecated sysfs support
batman-adv: Allow selection of routing algorithm over rtnetlink
batman-adv: Prepare infrastructure for newlink settings
batman-adv: Add new include for min/max helpers
batman-adv: Start new development cycle
====================
Link: https://lore.kernel.org/r/20201204154631.21063-1-sw@simonwunderlich.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When CONFIG_OF is disabled, there is a harmless warning about
an unused variable:
enetc_pf.c: In function 'enetc_phylink_create':
enetc_pf.c:981:17: error: unused variable 'dev' [-Werror=unused-variable]
Slightly rearrange the code to pass around the of_node as a
function argument, which avoids the problem without hurting
readability.
Fixes: 71b77a7a27 ("enetc: Migrate to PHYLINK and PCS_LYNX")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Link: https://lore.kernel.org/r/20201204120800.17193-1-claudiu.manoil@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
implement the NCI 2.x initial sequence to support NCI 2.x NFCC.
Since NCI 2.0, CORE_RESET and CORE_INIT sequence have been changed.
If NFCEE supports NCI 2.x, then NCI 2.x initial sequence will work.
In NCI 1.0, Initial sequence and payloads are as below:
(DH) (NFCC)
| -- CORE_RESET_CMD --> |
| <-- CORE_RESET_RSP -- |
| -- CORE_INIT_CMD --> |
| <-- CORE_INIT_RSP -- |
CORE_RESET_RSP payloads are Status, NCI version, Configuration Status.
CORE_INIT_CMD payloads are empty.
CORE_INIT_RSP payloads are Status, NFCC Features,
Number of Supported RF Interfaces, Supported RF Interface,
Max Logical Connections, Max Routing table Size,
Max Control Packet Payload Size, Max Size for Large Parameters,
Manufacturer ID, Manufacturer Specific Information.
In NCI 2.0, Initial Sequence and Parameters are as below:
(DH) (NFCC)
| -- CORE_RESET_CMD --> |
| <-- CORE_RESET_RSP -- |
| <-- CORE_RESET_NTF -- |
| -- CORE_INIT_CMD --> |
| <-- CORE_INIT_RSP -- |
CORE_RESET_RSP payloads are Status.
CORE_RESET_NTF payloads are Reset Trigger,
Configuration Status, NCI Version, Manufacturer ID,
Manufacturer Specific Information Length,
Manufacturer Specific Information.
CORE_INIT_CMD payloads are Feature1, Feature2.
CORE_INIT_RSP payloads are Status, NFCC Features,
Max Logical Connections, Max Routing Table Size,
Max Control Packet Payload Size,
Max Data Packet Payload Size of the Static HCI Connection,
Number of Credits of the Static HCI Connection,
Max NFC-V RF Frame Size, Number of Supported RF Interfaces,
Supported RF Interfaces.
Signed-off-by: Bongsu Jeon <bongsu.jeon@samsung.com>
Link: https://lore.kernel.org/r/20201202223147.3472-1-bongsu.jeon@samsung.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
