This is a patch to the phy_calibration.c that fixes up almost all
warnings and errors (except 80 characters limit and lack of tabs errors)
found by the checkpatch.pl tool
Signed-off-by: Timofey Trofimov <tumoxep@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch fixes line length, brace style and whitespace issues in the
mac_structures.h file found by the checkpatch.pl tool
Signed-off-by: Adam Latham <adam.latham@unisontorbay.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch fixes the use of //C99 comments in the mac_structures.h found by
the checkpatch.pl tool
Signed-off-by: Adam Latham <adam.latham@unisontorbay.org.uk>
Acked-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The C99 specification states in section 6.11.5:
The placement of a storage-class specifier other than at the beginning
of the declaration specifiers in a declaration is an obsolescent
feature.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is a patch to the pcl812.c file that fixes up the following
issues:
ERROR: code indent should use tabs where possible x 27
WARNING: line over 80 characters x 37
WARNING: please, no space before tabs x 13
WARNING: braces {} are not necessary for single statement blocks x 2
WARNING: printk() should include KERN_ facility level x 22
WARNING: braces {} are not necessary for any arm of this statement x 5
Signed-off-by: Gustavo Silva <silvagustavo@users.sourceforge.net>
Acked-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
I fixed indentation in one place and two long lines, a space and a brace
found by checkpatch.pl and fixed some long lines and whitespace around an =.
Signed-off-by: Lars Lindley <lindley@coyote.org>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The dmm32at.c and comedi_bond.c comedi driver files contain an
instructional comment block copied over from skel.c about how to format
a driver comment block. This comment was modified in skel.c by a
previous patch in this series to stop Comedi's 'dump_doc' script
treating it as an actual driver comment block. There isn't any need to
repeat this comment block in the other source files, so rather than
modify it, this patch just removes it from those files.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The Comedi team have a script 'dump_doc' to extract text from the driver
comment block (starting with line 'Driver:') in (most of) the comedi
driver source files. This was recently updated to allow and strip off a
" * " prefix at the start of each line (well actually, it uses the perl
substitution 's/^ ?\* ?//').
The skel.c file contains an instructional comment block about how to
format this driver comment block, but the updated 'dump_doc' script
mistakenly treats this as a valid driver comment block. This patch adds
some extra whitespace to stop the instructional comment block being
treated as a valid driver comment block by Comedi's 'dump_doc' script.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Previous whitespace changes to das08.c removed some whitespace from a
"driver comment block" that the Comedi team would like to keep. "Header
continuation lines" in this comment block should be indented with
whitespace. (This is after the " * " at the start of each line.)
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is a patch to the quatech_daqp_cs.c file that fixes up the following
issues:
ERROR: code indent should use tabs where possible x 1
WARNING: line over 80 characters x 1
WARNING: braces {} are not necessary for single statement blocks x 10
WARNING: printk() should include KERN_ facility level x 6
Signed-off-by: Gustavo Silva <silvagustavo@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is a patch to the pcmda12.c file that fixes up five printk() warning issues
Signed-off-by: Gustavo Silva <silvagustavo@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is a patch to the pcl816.c file that fixes up the following
issues:
ERROR: code indent should use tabs where possible x 2
WARNING: line over 80 characters x 34
WARNING: please, no space before tabs x 1
WARNING: braces {} are not necessary for single statement blocks x 6
WARNING: printk() should include KERN_ facility level x 15
WARNING: braces {} are not necessary for any arm of this statement x 1
Signed-off-by: Gustavo Silva <silvagustavo@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is a patch to the pcl711.c file that fixes up printk()
warning issues.
Signed-off-by: Gustavo Silva <silvagustavo@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is a patch to the me4000.c file that fixes up the following
issues:
ERROR: space required after that close brace '}' x 13
ERROR: spaces required around that ':' (ctx:VxV) x 3
WARNING: line over 80 characters x 96
WARNING: braces {} are not necessary for any arm of this statement x 2
Signed-off-by: Gustavo Silva <silvagustavo@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Remove all remaining typedefs from comedi drivers
Signed-off-by: Arun Thomas <arun.thomas@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Move the PCI devinit/devexit routines to the respective C source files
instead of calling COMEDI_PCI_INITCLEANUP
Signed-off-by: Arun Thomas <arun.thomas@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Move the init/exit routines to the respective C source files
instead of calling COMEDI_INITCLEANUP
Signed-off-by: Arun Thomas <arun.thomas@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Add MODULE_AUTHOR, MODULE_LICENSE, and MODULE_DESCRIPTION calls
to the respective C source files instead of calling COMEDI_MODULES_MACRO
Signed-off-by: Arun Thomas <arun.thomas@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is a patch to the ni_labpc.c file that fixes all, printk() should
include KERN-facility level, warnings found by the checkpatch.pl tool
Signed-off-by: Maurice Dawson <mauricedawson2699@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is a patch to the file am9513.h that fixes missing space warnings
found by the checkpatch.pl tool.
Signed-off-by: Bob Beattie <bob.beattie@ntlworld.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
A patch for s626.c to fix some of the warnings
reported by the checkpatch.pl tool, namely,
printk() should include KERN_ facility level
unnecessary whitespace before a quoted newline
Signed-off-by: John Sheehan <john.d.sheehan@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
A patch for unioxx5.c which fixes "trailing statements
should be on next line" errors raised by the
chechpatch.pl tool
Signed-off-by: John Sheehan <john.d.sheehan@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch fixes some long line lengths in gsc_hpdi.c as found by the
checkpatch.pl tool
Signed-off-by: Mark Rankilor <reodge@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch cleans up some various warnings generated from checkpatch.pl
Signed-off-by: Mark Rankilor <reodge@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
These checks are obviously pointless because kfree() can handle null
dereferences.
But really the main problem is that if the pointers were null that would
cause problems on the ealier lines. The dereferences would cause an
oops and the _release() functions use ->priv to determine which IRQ to
free. I looked into it and quite a few of the detach functions assume
link->priv is non-null. It seems like we can remove these checks.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Reduce stack usage in serial_2002_open() by allocating dig_in_config,
dig_out_config, chan_in_config, and chan_out_config temporary arrays
using kcalloc() and freeing them when done with.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The comedi device 'detach' method for the serial2002 driver has an
off-by-one error in its loop for freeing data belonging to its
subdevices. Fix it.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The comedi device 'open' method for the serial2002 driver frees any old
'maxdata_list' and 'range_table_list' arrays belonging to a subdevice
and allocates them again, but was missing checks for allocation failure.
If an allocation fails, free the 'maxdata_list' and 'range_table_list'
arrays for all subdevices and return an error.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Some comedi drivers should return an error from their 'open' method when
something goes wrong. Change the prototype of the 'open' method in
'struct comedi_device' to allow this, and change the drivers that use it.
Propagate any error to the 'open' file operation.
The corresponding 'close' method won't be called when the 'open' method
fails, so drivers failing the 'open' need to clean up any mess they
created.
The dt9812 and serial2002 drivers can now return an error on 'open'.
The jr3_pci driver also uses the 'open' method but doesn't fail it.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is a patch to the ni_tio.c file that fixes a brace warning found by
the checkpatch.pl tool
Signed-off-by: Samuel Richardson <sam.j.richardson@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6:
wimax/i2400m: fix missing endian correction read in fw loader
net8139: fix a race at the end of NAPI
pktgen: Fix accuracy of inter-packet delay.
pkt_sched: gen_estimator: add a new lock
net: deliver skbs on inactive slaves to exact matches
ipv6: fix ICMP6_MIB_OUTERRORS
r8169: fix mdio_read and update mdio_write according to hw specs
gianfar: Revive the driver for eTSEC devices (disable timestamping)
caif: fix a couple range checks
phylib: Add support for the LXT973 phy.
net: Print num_rx_queues imbalance warning only when there are allocated queues
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable:
Btrfs: The file argument for fsync() is never null
Btrfs: handle ERR_PTR from posix_acl_from_xattr()
Btrfs: avoid BUG when dropping root and reference in same transaction
Btrfs: prohibit a operation of changing acl's mask when noacl mount option used
Btrfs: should add a permission check for setfacl
Btrfs: btrfs_lookup_dir_item() can return ERR_PTR
Btrfs: btrfs_read_fs_root_no_name() returns ERR_PTRs
Btrfs: unwind after btrfs_start_transaction() errors
Btrfs: btrfs_iget() returns ERR_PTR
Btrfs: handle kzalloc() failure in open_ctree()
Btrfs: handle error returns from btrfs_lookup_dir_item()
Btrfs: Fix BUG_ON for fs converted from extN
Btrfs: Fix null dereference in relocation.c
Btrfs: fix remap_file_pages error
Btrfs: uninitialized data is check_path_shared()
Btrfs: fix fallocate regression
Btrfs: fix loop device on top of btrfs
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6:
PCI: clear bridge resource range if BIOS assigned bad one
PCI: hotplug/cpqphp, fix NULL dereference
Revert "PCI: create function symlinks in /sys/bus/pci/slots/N/"
PCI: change resource collision messages from KERN_ERR to KERN_INFO
Yannick found that video does not work with 2.6.34. The cause of this
bug was that the BIOS had assigned the wrong range to the PCI bridge
above the video device. Before 2.6.34 the kernel would have shrunk
the size of the bridge window, but since
d65245c PCI: don't shrink bridge resources
the kernel will avoid shrinking BIOS ranges.
So zero out the old range if we fail to claim it at boot time; this will
cause us to allocate a new range at startup, restoring the 2.6.34
behavior.
Fixes regression https://bugzilla.kernel.org/show_bug.cgi?id=16009.
Reported-by: Yannick <yannick.roehlly@free.fr>
Acked-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
There are devices out there which are PCI Hot-plug controllers with
compaq PCI IDs, but are not bridges, hence have pdev->subordinate
NULL. But cpqphp expects the pointer to be non-NULL.
Add a check to the probe function to avoid oopses like:
BUG: unable to handle kernel NULL pointer dereference at 00000050
IP: [<f82e3c41>] cpqhpc_probe+0x951/0x1120 [cpqphp]
*pdpt = 0000000033779001 *pde = 0000000000000000
...
The device here was:
00:0b.0 PCI Hot-plug controller [0804]: Compaq Computer Corporation PCI Hotplug Controller [0e11:a0f7] (rev 11)
Subsystem: Compaq Computer Corporation Device [0e11:a2f8]
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
This reverts commit 75568f8094.
Since they're just a convenience anyway, remove these symlinks since
they're causing duplicate filename errors in the wild.
Acked-by: Alex Chiang <achiang@canonical.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
We can often deal with PCI resource issues by moving devices around. In
that case, there's no point in alarming the user with messages like these.
There are many bug reports where the message itself is the only problem,
e.g., https://bugs.launchpad.net/ubuntu/+source/linux/+bug/413419 .
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
The "file" argument for fsync is never null so we can remove this check.
What drew my attention here is that 7ea8085910: "drop unused dentry
argument to ->fsync" introduced an unconditional dereference at the
start of the function and that generated a smatch warning.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
posix_acl_from_xattr() returns both ERR_PTRs and null, but it's OK to
pass null values to set_cached_acl()
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
If btrfs_ioctl_snap_destroy() deletes a snapshot but finishes
with end_transaction(), the cleaner kthread may come in and
drop the root in the same transaction. If that's the case, the
root's refs still == 1 in the tree when btrfs_del_root() deletes
the item, because commit_fs_roots() hasn't updated it yet (that
happens during the commit).
This wasn't a problem before only because
btrfs_ioctl_snap_destroy() would commit the transaction before dropping
the dentry reference, so the dead root wouldn't get queued up until
after the fs root item was updated in the btree.
Since it is not an error to drop the root reference and the root in the
same transaction, just drop the BUG_ON() in btrfs_del_root().
Signed-off-by: Sage Weil <sage@newdream.net>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
when used Posix File System Test Suite(pjd-fstest) to test btrfs,
some cases about setfacl failed when noacl mount option used.
I simplified used commands in pjd-fstest, and the following steps
can reproduce it.
------------------------
# cd btrfs-part/
# mkdir aaa
# setfacl -m m::rw aaa <- successed, but not expected by pjd-fstest.
------------------------
I checked ext3, a warning message occured, like as:
setfacl: aaa/: Operation not supported
Certainly, it's expected by pjd-fstest.
So, i compared acl.c of btrfs and ext3. Based on that, a patch created.
Fortunately, it works.
Signed-off-by: Shi Weihua <shiwh@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
On btrfs, do the following
------------------
# su user1
# cd btrfs-part/
# touch aaa
# getfacl aaa
# file: aaa
# owner: user1
# group: user1
user::rw-
group::rw-
other::r--
# su user2
# cd btrfs-part/
# setfacl -m u::rwx aaa
# getfacl aaa
# file: aaa
# owner: user1
# group: user1
user::rwx <- successed to setfacl
group::rw-
other::r--
------------------
but we should prohibit it that user2 changing user1's acl.
In fact, on ext3 and other fs, a message occurs:
setfacl: aaa: Operation not permitted
This patch fixed it.
Signed-off-by: Shi Weihua <shiwh@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
btrfs_lookup_dir_item() can return either ERR_PTRs or null.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
btrfs_read_fs_root_no_name() returns ERR_PTRs on error so I added a
check for that. It's not clear to me if it can also return NULL
pointers or not so I left the original NULL pointer check as is.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
This was added by a22285a6a3: "Btrfs: Integrate metadata reservation
with start_transaction". If we goto out here then we skip all the
unwinding and there are locks still held etc.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
