ACPI Firmware Performance Data Table (FPDT) provides information about
firmware performance during system boot, S3 suspend and S3 resume.
Have the kernel parse the FPDT table, and expose the firmware
performance data to userspace as sysfs attributes under
/sys/firmware/acpi/fpdt/.
Tested-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
After a rmmod thinkpad_acpi, lockdep pointed out this possible deadlock:
Our _show and _store sysfs attr functions get called with the kn->active
lock held for the sysfs attr and then take the profile_lock.
sysfs_remove_group() also takes the kn->active lock for the sysfs attr,
so if we call it with the profile_lock held, then we get an ABBA deadlock.
platform_profile_remove() must only be called by drivers which have
first *successfully* called platform_profile_register(). Anything else
is a driver bug. So the check for cur_profile being set before calling
sysfs_remove_group() is not necessary and it can be dropped.
It is safe to call sysfs_remove_group() without holding the profile_lock
since the attr-group group cannot be re-added until after we clear
cur_profile.
Change platform_profile_remove() to only hold the profile_lock while
clearing the cur_profile, fixing the deadlock.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This message:
acpi PNP0A08:02: _OSC failed (AE_NOT_FOUND); disabling ASPM
is alarming and slightly misleading. Per the PCI Firmware Spec, r3.2, sec
4.5.1, _OSC is required for PCIe hierarchies. If _OSC is absent or fails,
the OS must not attempt to use any of the features defined for _OSC. That
includes native hotplug, native PME, AER, and other things as well as ASPM.
Rephrase the message to:
acpi PNP0A08:02: _OSC: platform retains control of PCIe features (AE_NOT_FOUND)
Previous discussion at https://lore.kernel.org/r/20200602223618.GA845676@bjorn-Precision-5520/
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Sinan Kaya <okaya@kernel.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Yicong Yang <yangyicong@hisilicon.com>
9778c14b4c ("ACPI/PCI: Fix possible race condition on _OSC evaluation")
added locking around _OSC calls to protect the acpi_osc_data_list that
stored the results.
63f10f0f6d ("PCI/ACPI: move _OSC code to pci_root.c") moved the results
from acpi_osc_data_list to the struct acpi_pci_root, where it no longer
needs locking, but did not remove the lock.
Remove the unnecessary locking around _OSC calls.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
acpi_pci_osc_control_set() is only called from pci_root.c, so stop
exporting it and make it static.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Address issue observed on real world system with suboptimal IORT table
where DMA masks of PCI devices would get set to 0 as result.
iort_dma_setup() would query the root complex'/named component IORT
entry for a DMA mask, and use that over the one the device has been
configured with earlier.
Ideally we want to use the minimum mask of what the IORT contains for
the root complex and what the device was configured with.
Fixes: 5ac65e8c89 ("ACPI/IORT: Support address size limit for root complexes")
Signed-off-by: Moritz Fischer <mdf@kernel.org>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Link: https://lore.kernel.org/r/20210122012419.95010-1-mdf@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
To ensure we handle situations in which multiple sensors of the same
model (and therefore _HID) are present in a system, we need to be able
to iterate over devices matching a known _HID but unknown _UID and _HRV
- add acpi_dev_get_next_match_dev() to accommodate that possibility and
change acpi_dev_get_first_match_dev() to simply call the new function
with a NULL starting point. Add an iterator macro for convenience.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Daniel Scally <djrscally@gmail.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
There are two callers of acpi_get_device_data(), acpi_bus_get_device()
and acpi_bus_get_acpi_device(), but only one of them takes the int
return value into account. Moreover, the latter knows that it passes
a valid return pointer to acpi_get_device_data() and it properly
clears that pointer upfront, so it doesn't need acpi_get_device_data()
to do that.
For this reason, rearrange acpi_get_device_data() to return a strct
acpi_device pointer instead of an int and adapt its callers to that.
While at it, rename acpi_get_device_data() to handle_to_device(),
because the old name does not really reflect the functionality
provided by that function.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Add empty lines in some places in acpi_device_add() to help
readability and drop leading spaces before the labels in there.
No functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
The upfront allocation of new_bus_id is done to avoid allocating
memory under acpi_device_lock, but it doesn't really help,
because (1) it leads to many unnecessary memory allocations for
_ADR devices, (2) kstrdup_const() is run under that lock anyway and
(3) it complicates the code.
Rearrange acpi_device_add() to allocate memory for a new struct
acpi_device_bus_id instance only when necessary, eliminate a redundant
local variable from it and reduce the number of labels in there.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Drop the const qualifier from the static global cur_profile
pointer declaration.
This is a preparation patch for passing the cur_profile pointer as
parameter to the profile_get() and profile_set() callbacks so that
drivers dynamically allocating their driver-data struct, with their
platform_profile_handler struct embedded, can use this pointer to
get to their driver-data.
Note this also requires dropping the const from the pprof
platform_profile_register() function argument. Dropping this
const is not a problem, non of the queued up consumers of
platform_profile_register() actually pass in a const pointer.
Link: https://lore.kernel.org/linux-acpi/5e7a4d87-52ef-e487-9cc2-8e7094beaa08@redhat.com/
Link: https://lore.kernel.org/r/20210114073429.176462-2-jiaxun.yang@flygoat.com
Suggested-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
[ hdegoede@redhat.com: Also remove const from platform_profile_register() ]
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Calling acpi_thermal_check() from acpi_thermal_notify() directly
is problematic if _TMP triggers Notify () on the thermal zone for
which it has been evaluated (which happens on some systems), because
it causes a new acpi_thermal_notify() invocation to be queued up
every time and if that takes place too often, an indefinite number of
pending work items may accumulate in kacpi_notify_wq over time.
Besides, it is not really useful to queue up a new invocation of
acpi_thermal_check() if one of them is pending already.
For these reasons, rework acpi_thermal_notify() to queue up a thermal
check instead of calling acpi_thermal_check() directly and only allow
one thermal check to be pending at a time. Moreover, only allow one
acpi_thermal_check_fn() instance at a time to run
thermal_zone_device_update() for one thermal zone and make it return
early if it sees other instances running for the same thermal zone.
While at it, fold acpi_thermal_check() into acpi_thermal_check_fn(),
as it is only called from there after the other changes made here.
[This issue appears to have been exposed by commit 6d25be5782
("sched/core, workqueues: Distangle worker accounting from rq
lock"), but it is unclear why it was not visible earlier.]
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=208877
Reported-by: Stephen Berman <stephen.berman@gmx.net>
Diagnosed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Tested-by: Stephen Berman <stephen.berman@gmx.net>
Cc: All applicable <stable@vger.kernel.org>
Commit 8765c5ba19 ("ACPI / scan: Rework modalias creation when
"compatible" is present") may create two "MODALIAS=" in one uevent
file if specific conditions are met.
This breaks systemd-udevd, which assumes each "key" in one uevent file
to be unique. The internal implementation of systemd-udevd overwrites
the first MODALIAS with the second one, so its kmod rule doesn't load
the driver for the first MODALIAS.
So if both the ACPI modalias and the OF modalias are present, use the
latter to ensure that there will be only one MODALIAS.
Link: https://github.com/systemd/systemd/pull/18163
Suggested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Fixes: 8765c5ba19 ("ACPI / scan: Rework modalias creation when "compatible" is present")
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: 4.1+ <stable@vger.kernel.org> # 4.1+
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
A list_add corruption is reported by Hulk Robot like this:
==============
list_add corruption.
Call Trace:
link_obj+0xc0/0x1c0
link_group+0x21/0x140
configfs_register_subsystem+0xdb/0x380
acpi_configfs_init+0x25/0x1000 [acpi_configfs]
do_one_initcall+0x149/0x820
do_init_module+0x1ef/0x720
load_module+0x35c8/0x4380
__do_sys_finit_module+0x10d/0x1a0
do_syscall_64+0x34/0x80
It's because of the missing check after configfs_register_default_group,
where configfs_unregister_subsystem should be called once failure.
Fixes: 612bd01fc6 ("ACPI: add support for loading SSDTs via configfs")
Reported-by: Hulk Robot <hulkci@huawei.com>
Suggested-by: Hanjun Guo <guohanjun@huawei.com>
Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com>
Cc: 4.10+ <stable@vger.kernel.org> # 4.10+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Properly initialise vaddr pointers in cpc_read() and cpc_write() to
NULL instead of 0.
This fixes the following sparse warnings:
drivers/acpi/cppc_acpi.c:937:31: warning: Using plain integer as NULL pointer
drivers/acpi/cppc_acpi.c:982:31: warning: Using plain integer as NULL pointer
Signed-off-by: Ionela Voinescu <ionela.voinescu@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ppc_comm_addr is a virtual address to the PCC space and it's annotated
with __iomem. Therefore, generic_comm_base which gets assigned the value of
pcc_comm_address should be annotated as well.
This already happens in check_pcc_chan(), but not in send_pcc_cmd(), which
results in the following sparse warnings:
drivers/acpi/cppc_acpi.c:237:18: warning: cast removes address space '__iomem' of expression
drivers/acpi/cppc_acpi.c:299:9: warning: incorrect type in argument 2 (different address spaces)
drivers/acpi/cppc_acpi.c:299:9: expected void volatile [noderef] __iomem *addr
drivers/acpi/cppc_acpi.c:299:9: got unsigned short *
drivers/acpi/cppc_acpi.c:302:9: warning: incorrect type in argument 2 (different address spaces)
drivers/acpi/cppc_acpi.c:302:9: expected void volatile [noderef] __iomem *addr
drivers/acpi/cppc_acpi.c:302:9: got unsigned short *
Signed-off-by: Ionela Voinescu <ionela.voinescu@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Instead of open coding DEVICE_ATTR(), use the
DEVICE_ATTR_RW(), DEVICE_ATTR_RO() and DEVICE_ATTR_WO()
macros wherever possible.
This required a few functions to be renamed but the
functionality itself is unchanged.
Signed-off-by: Dwaipayan Ray <dwaipayanray1@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This affects all ACPICA source code modules.
ACPICA commit c570953c914437e621dd5f160f26ddf352e0d2f4
Link: https://github.com/acpica/acpica/commit/c570953c
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Detected by gcc 10.2.0.
ACPICA commit 608559800e1ad48b819744aeb1866d94335e2655
Link: https://github.com/acpica/acpica/commit/60855980
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 4b9135f5774caa796ddf826448811e8e7f08ef2f
GCC 7.1 gained -Wimplicit-fallthrough to warn on implicit fallthrough,
as well as __attribute__((__fallthrough__)) and comments to explicitly
denote that cases of fallthrough were intentional. Clang also supports
this warning and statement attribute, but not the comment form.
Robert Moore provides additional context about the lint comments being
removed. They were for "an old version of PC-Lint, which we don't use
anymore." Drop those.
This will help us enable -Wimplicit-fallthrough throughout the Linux
kernel.
Suggested-by: Robert Moore <robert.moore@intel.com>
Reported-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://github.com/acpica/acpica/commit/4b9135f5
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Set the acpi_device pointer which acpi_bus_get_device() returns-by-
reference to NULL on errors.
We've recently had 2 cases where callers of acpi_bus_get_device()
did not properly error check the return value, so set the returned-
by-reference acpi_device pointer to NULL, because at least some
callers of acpi_bus_get_device() expect that to be done on errors.
[ rjw: This issue was exposed by commit 71da201f38 ("ACPI: scan:
Defer enumeration of devices with _DEP lists") which caused it to
be much more likely to occur on some systems, but the real defect
had been introduced by an earlier commit. ]
Fixes: 40e7fcb192 ("ACPI: Add _DEP support to fix battery issue on Asus T100TA")
Fixes: bcfcd409d4 ("usb: split code locating ACPI companion into port and device")
Reported-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Diagnosed-by: Rafael J. Wysocki <rafael@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Cc: All applicable <stable@vger.kernel.org>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The loop is here to create default cooling device binding on the
THERMAL_TRIPS_NONE number which is used to be the 'forced_passive'
feature. However, we removed all code dealing with that in the thermal
core, thus this binding does no longer make sense.
Remove it.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Thara Gopinath <thara.gopinath@linaro.org>
Link: https://lore.kernel.org/r/20201214233811.485669-4-daniel.lezcano@linaro.org
ACPICA commit 5a8390fbd4c5c60da0b6d4ba53b5ee34fda9a0cb
With the exception code class check macros fixed in the previous
commit, let us now use those to simplify exception class checks
across ACPICA.
Link: https://github.com/acpica/acpica/commit/5a8390fb
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Julia and 0day report:
Zero-length and one-element arrays are deprecated, see
Documentation/process/deprecated.rst
Flexible-array members should be used instead.
However, a straight conversion to flexible arrays yields:
drivers/acpi/nfit/core.c:2276:4: error: flexible array member in a struct with no named members
drivers/acpi/nfit/core.c:2287:4: error: flexible array member in a struct with no named members
Instead, just use plain arrays not embedded flexible arrays.
Cc: Denis Efremov <efremov@linux.com>
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Julia Lawall <julia.lawall@inria.fr>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Linux VM on Hyper-V crashes with the latest mainline:
[ 4.069624] detected buffer overflow in strcpy
[ 4.077733] kernel BUG at lib/string.c:1149!
..
[ 4.085819] RIP: 0010:fortify_panic+0xf/0x11
...
[ 4.085819] Call Trace:
[ 4.085819] acpi_device_add.cold.15+0xf2/0xfb
[ 4.085819] acpi_add_single_object+0x2a6/0x690
[ 4.085819] acpi_bus_check_add+0xc6/0x280
[ 4.085819] acpi_ns_walk_namespace+0xda/0x1aa
[ 4.085819] acpi_walk_namespace+0x9a/0xc2
[ 4.085819] acpi_bus_scan+0x78/0x90
[ 4.085819] acpi_scan_init+0xfa/0x248
[ 4.085819] acpi_init+0x2c1/0x321
[ 4.085819] do_one_initcall+0x44/0x1d0
[ 4.085819] kernel_init_freeable+0x1ab/0x1f4
This is because of the recent buffer overflow detection in the
commit 6a39e62abb ("lib: string.h: detect intra-object overflow in
fortified string functions")
Here acpi_device_bus_id->bus_id can only hold 14 characters, while the
the acpi_device_hid(device) returns a 22-char string
"HYPER_V_GEN_COUNTER_V1".
Per ACPI Spec v6.2, Section 6.1.5 _HID (Hardware ID), if the ID is a
string, it must be of the form AAA#### or NNNN####, i.e. 7 chars or 8
chars.
The field bus_id in struct acpi_device_bus_id was originally defined as
char bus_id[9], and later was enlarged to char bus_id[15] in 2007 in the
commit bb0958544f ("ACPI: use more understandable bus_id for ACPI
devices")
Fix the issue by changing the field bus_id to const char *, and use
kstrdup_const() to initialize it.
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Tested-By: Jethro Beekman <jethro@fortanix.com>
[ rjw: Subject change, whitespace adjustment ]
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* acpi-scan:
ACPI: scan: add stub acpi_create_platform_device() for !CONFIG_ACPI
* acpi-misc:
ACPI: Update Kconfig help text for items that are no longer modular
The acpi driver wants to do a netlink notification in case of a hot or
critical trip point. Implement the corresponding ops to be used for
the thermal zone and use them instead of the notify ops.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://lore.kernel.org/r/20201210121514.25760-3-daniel.lezcano@linaro.org
The CONTAINER and HOTPLUG_MEMORY options mention modules but are bool
only, so if selected are always built in.
Drop the help text about modules.
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Two local variables in drivers/acpi/x86/s2idle.c are never read, so
drop them along with the code updating their values (in vain).
Fixes: fef9867119 ("ACPI: PM: s2idle: Move x86-specific code to the x86 directory")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This is the initial implementation of the platform-profile feature.
It provides the details discussed and outlined in the
sysfs-platform_profile document.
Many modern systems have the ability to modify the operating profile to
control aspects like fan speed, temperature and power levels. This
module provides a common sysfs interface that platform modules can register
against to control their individual profile options.
Signed-off-by: Mark Pearson <markpearson@lenovo.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
[ rjw: Use full words in enum values names ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
- Fix a long standing block-window-namespace issue surfaced by the ndctl
change to attempt to preserve the kernel device name over a
'reconfigure'
- Fix a few error path memory leaks in nfit and device-dax
- Silence a smatch warning in the ioctl path
- Miscellaneous cleanups
-----BEGIN PGP SIGNATURE-----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=/fha
-----END PGP SIGNATURE-----
Merge tag 'libnvdimm-for-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm updates from Dan Williams:
"Twas the day before Christmas and the only thing stirring in libnvdimm
/ device-dax land is a pile of miscellaneous fixups and cleanups.
The bulk of it has appeared in -next save the last two patches to
device-dax that have passed my build and unit tests.
- Fix a long standing block-window-namespace issue surfaced by the
ndctl change to attempt to preserve the kernel device name over
a 'reconfigure'
- Fix a few error path memory leaks in nfit and device-dax
- Silence a smatch warning in the ioctl path
- Miscellaneous cleanups"
* tag 'libnvdimm-for-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
device-dax: Avoid an unnecessary check in alloc_dev_dax_range()
device-dax: Fix range release
device-dax: delete a redundancy check in dev_dax_validate_align()
libnvdimm/label: Return -ENXIO for no slot in __blk_label_update
device-dax/core: Fix memory leak when rmmod dax.ko
device-dax/pmem: Convert comma to semicolon
libnvdimm: Cleanup include of badblocks.h
ACPI: NFIT: Fix input validation of bus-family
libnvdimm/namespace: Fix reaping of invalidated block-window-namespace labels
ACPI/nfit: avoid accessing uninitialized memory in acpi_nfit_ctl()
- Modify the ACPI device enumeration code to defer the enumeration
of devices with an _HID whose lists of operation region
dependencies returned by _DEP are not empty after eliminating the
entries representing known-benign dependencies from them (Rafael
Wysocki, Hans de Goede).
- Make the ACPI PNP code mathing device IDs also take the length of
the given ID string into account (Hui Wang).
- Add AMD systems support to the ACPI code handling suspend-to-idle
via the PNP0D80 (System Power Management Controller) device _DSM
interface (Shyam Sundar).
- Move the suspend-to-idle handling code related to the PNP0D80
device _DSM interface, which is x86-specific, to a separate file
in the x86/ subdirectory (Rafael Wysocki).
-----BEGIN PGP SIGNATURE-----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=wL0y
-----END PGP SIGNATURE-----
Merge tag 'acpi-5.11-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more ACPI updates from Rafael Wysocki:
"These make the ACPI enumeration of devices take _DEP information into
account more aggressively, fix device IDs matching in the ACPI part of
the PNP devices framework and update the ACPI code related to
suspend-to-idle to take systems based on AMD hardware into account
properly.
Specifics:
- Modify the ACPI device enumeration code to defer the enumeration of
devices with an _HID whose lists of operation region dependencies
returned by _DEP are not empty after eliminating the entries
representing known-benign dependencies from them (Rafael Wysocki,
Hans de Goede).
- Make the ACPI PNP code mathing device IDs also take the length of
the given ID string into account (Hui Wang).
- Add AMD systems support to the ACPI code handling suspend-to-idle
via the PNP0D80 (System Power Management Controller) device _DSM
interface (Shyam Sundar).
- Move the suspend-to-idle handling code related to the PNP0D80
device _DSM interface, which is x86-specific, to a separate file in
the x86/ subdirectory (Rafael Wysocki)"
* tag 'acpi-5.11-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: PM: s2idle: Move x86-specific code to the x86 directory
ACPI: scan: Add Intel Baytrail Mailbox Device to acpi_ignore_dep_ids
ACPI: scan: Avoid unnecessary second pass in acpi_bus_scan()
ACPI: scan: Defer enumeration of devices with _DEP lists
ACPI: scan: Evaluate _DEP before adding the device
ACPI: PM: s2idle: Add AMD support to handle _DSM
ACPI: PNP: compare the string length in the matching_id()
- Rework the passive-mode "fast switch" path in the intel_pstate
driver to allow it receive the minimum (required) and target
(desired) performance information from the schedutil governor so
as to avoid running some workloads too fast (Rafael Wysocki).
- Make the intel_pstate driver allow the policy max limit to be
increased after the guaranteed performance value for the given
CPU has increased (Rafael Wysocki).
- Clean up the handling of CPU coordination types in the CPPC
cpufreq driver and make it export frequency domains information
to user space via sysfs (Ionela Voinescu).
- Fix the ACPI code handling processor objects to use a correct
coordination type when it fails to map frequency domains and drop
a redundant CPU map initialization from it (Ionela Voinescu, Punit
Agrawal).
-----BEGIN PGP SIGNATURE-----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=AcdB
-----END PGP SIGNATURE-----
Merge tag 'pm-5.11-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more power management updates from Rafael Wysocki:
"These update the CPPC cpufreq driver and intel_pstate (which involves
updating the cpufreq core and the schedutil governor) and make
janitorial changes in the ACPI code handling processor objects.
Specifics:
- Rework the passive-mode "fast switch" path in the intel_pstate
driver to allow it receive the minimum (required) and target
(desired) performance information from the schedutil governor so as
to avoid running some workloads too fast (Rafael Wysocki).
- Make the intel_pstate driver allow the policy max limit to be
increased after the guaranteed performance value for the given CPU
has increased (Rafael Wysocki).
- Clean up the handling of CPU coordination types in the CPPC cpufreq
driver and make it export frequency domains information to user
space via sysfs (Ionela Voinescu).
- Fix the ACPI code handling processor objects to use a correct
coordination type when it fails to map frequency domains and drop a
redundant CPU map initialization from it (Ionela Voinescu, Punit
Agrawal)"
* tag 'pm-5.11-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: intel_pstate: Use most recent guaranteed performance values
cpufreq: intel_pstate: Implement the ->adjust_perf() callback
cpufreq: Add special-purpose fast-switching callback for drivers
cpufreq: schedutil: Add util to struct sg_cpu
cppc_cpufreq: replace per-cpu data array with a list
cppc_cpufreq: expose information on frequency domains
cppc_cpufreq: clarify support for coordination types
cppc_cpufreq: use policy->cpu as driver of frequency setting
ACPI: processor: fix NONE coordination for domain mapping failure
* pm-cpufreq:
cpufreq: intel_pstate: Use most recent guaranteed performance values
cpufreq: intel_pstate: Implement the ->adjust_perf() callback
cpufreq: Add special-purpose fast-switching callback for drivers
cpufreq: schedutil: Add util to struct sg_cpu
cppc_cpufreq: replace per-cpu data array with a list
cppc_cpufreq: expose information on frequency domains
cppc_cpufreq: clarify support for coordination types
cppc_cpufreq: use policy->cpu as driver of frequency setting
ACPI: processor: fix NONE coordination for domain mapping failure
ACPI: processor: Drop duplicate setting of shared_cpu_map
* acpi-scan:
ACPI: scan: Add Intel Baytrail Mailbox Device to acpi_ignore_dep_ids
ACPI: scan: Avoid unnecessary second pass in acpi_bus_scan()
ACPI: scan: Defer enumeration of devices with _DEP lists
ACPI: scan: Evaluate _DEP before adding the device
* acpi-pnp:
ACPI: PNP: compare the string length in the matching_id()
* acpi-sleep:
ACPI: PM: s2idle: Move x86-specific code to the x86 directory
ACPI: PM: s2idle: Add AMD support to handle _DSM
Some code in drivers/acpi/sleep.c (which is regarded as a generic
file) related to suspend-to-idle support has grown direct dependencies
on x86, but in fact it has been specific to x86 (which is the only
user of it) anyway for a long time.
For this reason, move that code to a separate file under acpi/x86/
and make it build and run as before under the right conditions.
While at it, rename a vendor checking function in that code and
consistently use acpi_handle_debug() for printing debug-related
information in it.
No expected functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Linux does not have a driver for / does not use the "Intel Baytrail
Mailbox Device" (ACIP HID INT33BD). Add it to the acpi_ignore_dep_ids
list, so that we do not defer probing ACPI devices which depend on
another ACPI device with this HID.
Specifically this makes us not defer the probing of the GPO1 ACPI
device / GPIO controller on the Acer Switch 10E SW3-016. On this
tablet model the _HID method of the ACPI node for the UART attached
Bluetooth, reads GPIOs to detect the installed wifi chip and updates
the reported _HID for the Bluetooth's ACPI node accordingly.
For the Bluetooth's ACPI node to report the correct _HID the GPO1 device
must be probed and attached during the first scan pass. Adding the
"INT33BD" HID to the acpi_ignore_dep_ids list makes this all work.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
If there are no devices whose enumeration has been deferred after
the first pass in acpi_bus_scan(), the second pass is not necssary,
so avoid it with the help of a new static variable.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
In some cases ACPI control methods used during device enumeration
(such as _HID or _STA) may rely on Operation Region handlers
supplied by the drivers of other devices [1]:
An example of this is the Acer Switch 10E SW3-016 model. The _HID
method of the ACPI node for the UART attached Bluetooth, reads
GPIOs to detect the installed wifi chip and update the _HID for the
Bluetooth's ACPI node accordingly. The current ACPI scan code calls
_HID before the GPIO controller's OpRegions are available, leading
to the wrong _HID being used and Bluetooth not working.
In principle, in those cases there should be a _DEP control method
under the device object with OpRegion enumeration dependencies, so
deferring the enumeration of devices with _DEP returning a non-empty
list of suppliers of OpRegions depended on by the given device
(modulo some known exceptions that don't really supply any OpRegions
and are listed by _DEP for other reasons irrelevant for Linux) should
at least address the first-order dependencies by allowing the OpRegion
suppliers to be enumerated before their consumers.
Implement the above idea by modifying acpi_bus_scan() to enumerate
devices in the given scope of the ACPI namespace in two passes,
where the first pass covers the devices without "significant" lists
of dependencies coming from _DEP only and the second pass covers
all of the devices that were not enumerated in the first pass.
Take _DEP into account only for device objects with _HID, mostly in
order to avoid deferring the creation of ACPI device objects that
represent PCI devices and must be present during the enumeration
of the PCI bus (which takes place during the processing of the ACPI
device object that represents the host bridge), so that they can
be properly associated with the corresponding PCI devices.
Link: https://lore.kernel.org/linux-acpi/20201121203040.146252-1-hdegoede@redhat.com/ # [1]
Reported-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Evaluate _DEP before calling acpi_add_single_object() from
acpi_bus_check_add() and do that only for ACPI_BUS_TYPE_DEVICE
objects.
While at it, rename acpi_device_dep_initialize() to
acpi_scan_check_dep(), fix up a memory allocation statement in
that function, consistently treat memory allocation failures in
there as intermittent errors and make some related janitorial
changes in it.
This change will help to avoid calling acpi_add_single_object() if
there are unmet _DEP dependencies in the future, as that may cause
some control methods, potentially depending on the presence of
operation regions supplied by other devices, to be evaluated
prematurely.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Initial support for S2Idle based on the Intel implementation [1] does not
work for AMD as the BIOS implementation for ACPI methods like the _DSM
are not standardized.
So, the way in which the UUID's were parsed and the ACPI packages were
retrieved out of the ACPI objects are not the same between Intel and AMD.
Add AMD support for S2Idle to parse the UUID, evaluate the
_DSM methods, prepare the Idle constraint list etc.
Link: https://uefi.org/sites/default/files/resources/Intel_ACPI_Low_Power_S0_Idle.pdf # [1]
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
- Update ACPICA code in the kernel to upstream revision 20201113
with changes as follows:
* Add 5 new UUIDs to the known UUID table (Bob Moore).
* Remove extreaneous "the" in comments (Colin Ian King).
* Add function trace macros to improve debugging (Erik Kaneda).
* Fix interpreter memory leak (Erik Kaneda).
* Handle "orphan" _REG for GPIO OpRegions (Hans de Goede).
- Introduce resource_union() and resource_intersection() helpers
and clean up some resource-manipulation code with the help of
them (Andy Shevchenko).
- Revert problematic commit related to the handling of resources
in the ACPI core (Daniel Scally).
- Extend the ACPI device enumeration documentation and the
gpio-line-names _DSD property documentation, clean up the
latter (Flavio Suligoi).
- Clean up _DEP handling during device enumeration, modify the list
of _DEP exceptions and the handling of it and fix up terminology
related to _DEP (Hans de Goede, Rafael Wysocki).
- Eliminate in_interrupt() usage from the ACPI EC driver (Sebastian
Andrzej Siewior).
- Clean up the advance_transaction() routine and related code in
the ACPI EC driver (Rafael Wysocki).
- Add new backlight quirk for GIGABYTE GB-BXBT-2807 (Jasper
St. Pierre).
- Make assorted janitorial changes in several ACPI-related pieces
of code (Hanjun Guo, Jason Yan, Punit Agrawal).
-----BEGIN PGP SIGNATURE-----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=5LZe
-----END PGP SIGNATURE-----
Merge tag 'acpi-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
"These update the ACPICA code in the kernel to upstream revision
20201113, fix and clean up some resources manipulation code, extend
the enumeration and gpio-line-names property documentation, clean up
the handling of _DEP during device enumeration, add a new backlight
DMI quirk, clean up transaction handling in the EC driver and make
some assorted janitorial changes.
Specifics:
- Update ACPICA code in the kernel to upstream revision 20201113 with
changes as follows:
* Add 5 new UUIDs to the known UUID table (Bob Moore)
* Remove extreaneous "the" in comments (Colin Ian King)
* Add function trace macros to improve debugging (Erik Kaneda)
* Fix interpreter memory leak (Erik Kaneda)
* Handle "orphan" _REG for GPIO OpRegions (Hans de Goede)
- Introduce resource_union() and resource_intersection() helpers and
clean up some resource-manipulation code with the help of them
(Andy Shevchenko)
- Revert problematic commit related to the handling of resources in
the ACPI core (Daniel Scally)
- Extend the ACPI device enumeration documentation and the
gpio-line-names _DSD property documentation, clean up the latter
(Flavio Suligoi)
- Clean up _DEP handling during device enumeration, modify the list
of _DEP exceptions and the handling of it and fix up terminology
related to _DEP (Hans de Goede, Rafael Wysocki)
- Eliminate in_interrupt() usage from the ACPI EC driver (Sebastian
Andrzej Siewior)
- Clean up the advance_transaction() routine and related code in the
ACPI EC driver (Rafael Wysocki)
- Add new backlight quirk for GIGABYTE GB-BXBT-2807 (Jasper St
Pierre)
- Make assorted janitorial changes in several ACPI-related pieces of
code (Hanjun Guo, Jason Yan, Punit Agrawal)"
* tag 'acpi-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (40 commits)
ACPI: scan: Fix up _DEP-related terminology with supplier/consumer
ACPI: scan: Drop INT3396 from acpi_ignore_dep_ids[]
ACPI: video: Add DMI quirk for GIGABYTE GB-BXBT-2807
Revert "ACPI / resources: Use AE_CTRL_TERMINATE to terminate resources walks"
ACPI: scan: Add PNP0D80 to the _DEP exceptions list
ACPI: scan: Call acpi_get_object_info() from acpi_add_single_object()
ACPI: scan: Add acpi_info_matches_hids() helper
ACPICA: Update version to 20201113
ACPICA: Interpreter: fix memory leak by using existing buffer
ACPICA: Add function trace macros to improve debugging
ACPICA: Also handle "orphan" _REG methods for GPIO OpRegions
ACPICA: Remove extreaneous "the" in comments
ACPICA: Add 5 new UUIDs to the known UUID table
resource: provide meaningful MODULE_LICENSE() in test suite
ASoC: Intel: catpt: Replace open coded variant of resource_intersection()
ACPI: processor: Drop duplicate setting of shared_cpu_map
ACPI: EC: Clean up status flags checks in advance_transaction()
ACPI: EC: Untangle error handling in advance_transaction()
ACPI: EC: Simplify error handling in advance_transaction()
ACPI: EC: Rename acpi_ec_is_gpe_raised()
...
- Use local_clock() instead of jiffies in the cpufreq statistics to
improve accuracy (Viresh Kumar).
- Fix up OPP usage in the cpufreq-dt and qcom-cpufreq-nvmem cpufreq
drivers (Viresh Kumar).
- Clean up the cpufreq core, the intel_pstate driver and the
schedutil cpufreq governor (Rafael Wysocki).
- Fix up error code paths in the sti-cpufreq and mediatek cpufreq
drivers (Yangtao Li, Qinglang Miao).
- Fix cpufreq_online() to return error codes instead of success (0)
in all cases when it fails (Wang ShaoBo).
- Add mt8167 support to the mediatek cpufreq driver and blacklist
mt8516 in the cpufreq-dt-platdev driver (Fabien Parent).
- Modify the tegra194 cpufreq driver to always return values from
the frequency table as the current frequency and clean up that
driver (Sumit Gupta, Jon Hunter).
- Modify the arm_scmi cpufreq driver to allow it to discover the
power scale present in the performance protocol and provide this
information to the Energy Model (Lukasz Luba).
- Add missing MODULE_DEVICE_TABLE to several cpufreq drivers (Pali
Rohár).
- Clean up the CPPC cpufreq driver (Ionela Voinescu).
- Fix NVMEM_IMX_OCOTP dependency in the imx cpufreq driver (Arnd
Bergmann).
- Rework the poling interval selection for the polling state in
cpuidle (Mel Gorman).
- Enable suspend-to-idle for PSCI OSI mode in the PSCI cpuidle
driver (Ulf Hansson).
- Modify the OPP framework to support empty (node-less) OPP tables
in DT for passing dependency information (Nicola Mazzucato).
- Fix potential lockdep issue in the OPP core and clean up the OPP
core (Viresh Kumar).
- Modify dev_pm_opp_put_regulators() to accept a NULL argument and
update its users accordingly (Viresh Kumar).
- Add frequency changes tracepoint to devfreq (Matthias Kaehlcke).
- Add support for governor feature flags to devfreq, make devfreq
sysfs file permissions depend on the governor and clean up the
devfreq core (Chanwoo Choi).
- Clean up the tegra20 devfreq driver and deprecate it to allow
another driver based on EMC_STAT to be used instead of it (Dmitry
Osipenko).
- Add interconnect support to the tegra30 devfreq driver, allow it
to take the interconnect and OPP information from DT and clean it
up ((Dmitry Osipenko).
- Add interconnect support to the exynos-bus devfreq driver along
with interconnect properties documentation (Sylwester Nawrocki).
- Add suport for AMD Fam17h and Fam19h processors to the RAPL power
capping driver (Victor Ding, Kim Phillips).
- Fix handling of overly long constraint names in the powercap
framework (Lukasz Luba).
- Fix the wakeup configuration handling for bridges in the ACPI
device power management core (Rafael Wysocki).
- Add support for using an abstract scale for power units in the
Energy Model (EM) and document it (Lukasz Luba).
- Add em_cpu_energy() micro-optimization to the EM (Pavankumar
Kondeti).
- Modify the generic power domains (genpd) framwework to support
suspend-to-idle (Ulf Hansson).
- Fix creation of debugfs nodes in genpd (Thierry Strudel).
- Clean up genpd (Lina Iyer).
- Clean up the core system-wide suspend code and make it print
driver flags for devices with debug enabled (Alex Shi, Patrice
Chotard, Chen Yu).
- Modify the ACPI system reboot code to make it prepare for system
power off to avoid confusing the platform firmware (Kai-Heng Feng).
- Update the pm-graph (multiple changes, mostly usability-related)
and cpupower (online and offline CPU information support) PM
utilities (Todd Brandt, Brahadambal Srinivasan).
-----BEGIN PGP SIGNATURE-----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=BVdX
-----END PGP SIGNATURE-----
Merge tag 'pm-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These update cpufreq (core and drivers), cpuidle (polling state
implementation and the PSCI driver), the OPP (operating performance
points) framework, devfreq (core and drivers), the power capping RAPL
(Running Average Power Limit) driver, the Energy Model support, the
generic power domains (genpd) framework, the ACPI device power
management, the core system-wide suspend code and power management
utilities.
Specifics:
- Use local_clock() instead of jiffies in the cpufreq statistics to
improve accuracy (Viresh Kumar).
- Fix up OPP usage in the cpufreq-dt and qcom-cpufreq-nvmem cpufreq
drivers (Viresh Kumar).
- Clean up the cpufreq core, the intel_pstate driver and the
schedutil cpufreq governor (Rafael Wysocki).
- Fix up error code paths in the sti-cpufreq and mediatek cpufreq
drivers (Yangtao Li, Qinglang Miao).
- Fix cpufreq_online() to return error codes instead of success (0)
in all cases when it fails (Wang ShaoBo).
- Add mt8167 support to the mediatek cpufreq driver and blacklist
mt8516 in the cpufreq-dt-platdev driver (Fabien Parent).
- Modify the tegra194 cpufreq driver to always return values from the
frequency table as the current frequency and clean up that driver
(Sumit Gupta, Jon Hunter).
- Modify the arm_scmi cpufreq driver to allow it to discover the
power scale present in the performance protocol and provide this
information to the Energy Model (Lukasz Luba).
- Add missing MODULE_DEVICE_TABLE to several cpufreq drivers (Pali
Rohár).
- Clean up the CPPC cpufreq driver (Ionela Voinescu).
- Fix NVMEM_IMX_OCOTP dependency in the imx cpufreq driver (Arnd
Bergmann).
- Rework the poling interval selection for the polling state in
cpuidle (Mel Gorman).
- Enable suspend-to-idle for PSCI OSI mode in the PSCI cpuidle driver
(Ulf Hansson).
- Modify the OPP framework to support empty (node-less) OPP tables in
DT for passing dependency information (Nicola Mazzucato).
- Fix potential lockdep issue in the OPP core and clean up the OPP
core (Viresh Kumar).
- Modify dev_pm_opp_put_regulators() to accept a NULL argument and
update its users accordingly (Viresh Kumar).
- Add frequency changes tracepoint to devfreq (Matthias Kaehlcke).
- Add support for governor feature flags to devfreq, make devfreq
sysfs file permissions depend on the governor and clean up the
devfreq core (Chanwoo Choi).
- Clean up the tegra20 devfreq driver and deprecate it to allow
another driver based on EMC_STAT to be used instead of it (Dmitry
Osipenko).
- Add interconnect support to the tegra30 devfreq driver, allow it to
take the interconnect and OPP information from DT and clean it up
(Dmitry Osipenko).
- Add interconnect support to the exynos-bus devfreq driver along
with interconnect properties documentation (Sylwester Nawrocki).
- Add suport for AMD Fam17h and Fam19h processors to the RAPL power
capping driver (Victor Ding, Kim Phillips).
- Fix handling of overly long constraint names in the powercap
framework (Lukasz Luba).
- Fix the wakeup configuration handling for bridges in the ACPI
device power management core (Rafael Wysocki).
- Add support for using an abstract scale for power units in the
Energy Model (EM) and document it (Lukasz Luba).
- Add em_cpu_energy() micro-optimization to the EM (Pavankumar
Kondeti).
- Modify the generic power domains (genpd) framwework to support
suspend-to-idle (Ulf Hansson).
- Fix creation of debugfs nodes in genpd (Thierry Strudel).
- Clean up genpd (Lina Iyer).
- Clean up the core system-wide suspend code and make it print driver
flags for devices with debug enabled (Alex Shi, Patrice Chotard,
Chen Yu).
- Modify the ACPI system reboot code to make it prepare for system
power off to avoid confusing the platform firmware (Kai-Heng Feng).
- Update the pm-graph (multiple changes, mostly usability-related)
and cpupower (online and offline CPU information support) PM
utilities (Todd Brandt, Brahadambal Srinivasan)"
* tag 'pm-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (86 commits)
cpufreq: Fix cpufreq_online() return value on errors
cpufreq: Fix up several kerneldoc comments
cpufreq: stats: Use local_clock() instead of jiffies
cpufreq: schedutil: Simplify sugov_update_next_freq()
cpufreq: intel_pstate: Simplify intel_cpufreq_update_pstate()
PM: domains: create debugfs nodes when adding power domains
opp: of: Allow empty opp-table with opp-shared
dt-bindings: opp: Allow empty OPP tables
media: venus: dev_pm_opp_put_*() accepts NULL argument
drm/panfrost: dev_pm_opp_put_*() accepts NULL argument
drm/lima: dev_pm_opp_put_*() accepts NULL argument
PM / devfreq: exynos: dev_pm_opp_put_*() accepts NULL argument
cpufreq: qcom-cpufreq-nvmem: dev_pm_opp_put_*() accepts NULL argument
cpufreq: dt: dev_pm_opp_put_regulators() accepts NULL argument
opp: Allow dev_pm_opp_put_*() APIs to accept NULL opp_table
opp: Don't create an OPP table from dev_pm_opp_get_opp_table()
cpufreq: dt: Don't (ab)use dev_pm_opp_get_opp_table() to create OPP table
opp: Reduce the size of critical section in _opp_kref_release()
PM / EM: Micro optimization in em_cpu_energy
cpufreq: arm_scmi: Discover the power scale in performance protocol
...
Core:
- Consolidation and robustness changes for irq time accounting
- Cleanup and consolidation of irq stats
- Remove the fasteoi IPI flow which has been proved useless
- Provide an interface for converting legacy interrupt mechanism into
irqdomains
Drivers:
The rare event of not having completely new chip driver code, just new
DT bindings and extensions of existing drivers to accomodate new
variants!
- Preliminary support for managed interrupts on platform devices
- Correctly identify allocation of MSIs proxyied by another device
- Generalise the Ocelot support to new SoCs
- Improve GICv4.1 vcpu entry, matching the corresponding KVM optimisation
- Work around spurious interrupts on Qualcomm PDC
- Random fixes and cleanups
Thanks,
tglx
-----BEGIN PGP SIGNATURE-----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=iytv
-----END PGP SIGNATURE-----
Merge tag 'irq-core-2020-12-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq updates from Thomas Gleixner:
"Generic interrupt and irqchips subsystem updates. Unusually, there is
not a single completely new irq chip driver, just new DT bindings and
extensions of existing drivers to accomodate new variants!
Core:
- Consolidation and robustness changes for irq time accounting
- Cleanup and consolidation of irq stats
- Remove the fasteoi IPI flow which has been proved useless
- Provide an interface for converting legacy interrupt mechanism into
irqdomains
Drivers:
- Preliminary support for managed interrupts on platform devices
- Correctly identify allocation of MSIs proxyied by another device
- Generalise the Ocelot support to new SoCs
- Improve GICv4.1 vcpu entry, matching the corresponding KVM
optimisation
- Work around spurious interrupts on Qualcomm PDC
- Random fixes and cleanups"
* tag 'irq-core-2020-12-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (54 commits)
irqchip/qcom-pdc: Fix phantom irq when changing between rising/falling
driver core: platform: Add devm_platform_get_irqs_affinity()
ACPI: Drop acpi_dev_irqresource_disabled()
resource: Add irqresource_disabled()
genirq/affinity: Add irq_update_affinity_desc()
irqchip/gic-v3-its: Flag device allocation as proxied if behind a PCI bridge
irqchip/gic-v3-its: Tag ITS device as shared if allocating for a proxy device
platform-msi: Track shared domain allocation
irqchip/ti-sci-intr: Fix freeing of irqs
irqchip/ti-sci-inta: Fix printing of inta id on probe success
drivers/irqchip: Remove EZChip NPS interrupt controller
Revert "genirq: Add fasteoi IPI flow"
irqchip/hip04: Make IPIs use handle_percpu_devid_irq()
irqchip/bcm2836: Make IPIs use handle_percpu_devid_irq()
irqchip/armada-370-xp: Make IPIs use handle_percpu_devid_irq()
irqchip/gic, gic-v3: Make SGIs use handle_percpu_devid_irq()
irqchip/ocelot: Add support for Jaguar2 platforms
irqchip/ocelot: Add support for Serval platforms
irqchip/ocelot: Add support for Luton platforms
irqchip/ocelot: prepare to support more SoC
...
Here is the big driver core updates for 5.11-rc1
This time there was a lot of different work happening here for some
reason:
- redo of the fwnode link logic, speeding it up greatly
- auxiliary bus added (this was a tag that will be pulled in
from other trees/maintainers this merge window as well, as
driver subsystems started to rely on it)
- platform driver core cleanups on the way to fixing some
long-time api updates in future releases
- minor fixes and tweaks.
All have been in linux-next with no (finally) reported issues. Testing
there did helped in shaking issues out a lot :)
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCX9iEUQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynBJwCgjBAtVWXquZz4m/pyjn0HoTC7tdYAnAlQIj9s
vRbPjOgH9R+YRJzFs1Kx
=X6UP
-----END PGP SIGNATURE-----
Merge tag 'driver-core-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the big driver core updates for 5.11-rc1
This time there was a lot of different work happening here for some
reason:
- redo of the fwnode link logic, speeding it up greatly
- auxiliary bus added (this was a tag that will be pulled in from
other trees/maintainers this merge window as well, as driver
subsystems started to rely on it)
- platform driver core cleanups on the way to fixing some long-time
api updates in future releases
- minor fixes and tweaks.
All have been in linux-next with no (finally) reported issues. Testing
there did helped in shaking issues out a lot :)"
* tag 'driver-core-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (39 commits)
driver core: platform: don't oops in platform_shutdown() on unbound devices
ACPI: Use fwnode_init() to set up fwnode
misc: pvpanic: Replace OF headers by mod_devicetable.h
misc: pvpanic: Combine ACPI and platform drivers
usb: host: sl811: Switch to use platform_get_mem_or_io()
vfio: platform: Switch to use platform_get_mem_or_io()
driver core: platform: Introduce platform_get_mem_or_io()
dyndbg: fix use before null check
soc: fix comment for freeing soc_dev_attr
driver core: platform: use bus_type functions
driver core: platform: change logic implementing platform_driver_probe
driver core: platform: reorder functions
driver core: make driver_probe_device() static
driver core: Fix a couple of typos
driver core: Reorder devices on successful probe
driver core: Delete pointless parameter in fwnode_operations.add_links
driver core: Refactor fw_devlink feature
efi: Update implementation of add_links() to create fwnode links
of: property: Update implementation of add_links() to create fwnode links
driver core: Use device's fwnode to check if it is waiting for suppliers
...
Recently we met a touchscreen problem on some Thinkpad machines, the
touchscreen driver (i2c-hid) is not loaded and the touchscreen can't
work.
An i2c ACPI device with the name WACF2200 is defined in the BIOS, with
the current rule in matching_id(), this device will be regarded as
a PNP device since there is WACFXXX in the acpi_pnp_device_ids[] and
this PNP device is attached to the acpi device as the 1st
physical_node, this will make the i2c bus match fail when i2c bus
calls acpi_companion_match() to match the acpi_id_table in the i2c-hid
driver.
WACF2200 is an i2c device instead of a PNP device, after adding the
string length comparing, the matching_id() will return false when
matching WACF2200 and WACFXXX, and it is reasonable to compare the
string length when matching two IDs.
Suggested-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The cppc_cpudata per-cpu storage was inefficient (1) additional to causing
functional issues (2) when CPUs are hotplugged out, due to per-cpu data
being improperly initialised.
(1) The amount of information needed for CPPC performance control in its
cpufreq driver depends on the domain (PSD) coordination type:
ANY: One set of CPPC control and capability data (e.g desired
performance, highest/lowest performance, etc) applies to all
CPUs in the domain.
ALL: Same as ANY. To be noted that this type is not currently
supported. When supported, information about which CPUs
belong to a domain is needed in order for frequency change
requests to be sent to each of them.
HW: It's necessary to store CPPC control and capability
information for all the CPUs. HW will then coordinate the
performance state based on their limitations and requests.
NONE: Same as HW. No HW coordination is expected.
Despite this, the previous initialisation code would indiscriminately
allocate memory for all CPUs (all_cpu_data) and unnecessarily
duplicate performance capabilities and the domain sharing mask and type
for each possible CPU.
(2) With the current per-cpu structure, when having ANY coordination,
the cppc_cpudata cpu information is not initialised (will remain 0)
for all CPUs in a policy, other than policy->cpu. When policy->cpu is
hotplugged out, the driver will incorrectly use the uninitialised (0)
value of the other CPUs when making frequency changes. Additionally,
the previous values stored in the perf_ctrls.desired_perf will be
lost when policy->cpu changes.
Therefore replace the array of per cpu data with a list. The memory for
each structure is allocated at policy init, where a single structure
can be allocated per policy, not per cpu. In order to accommodate the
struct list_head node in the cppc_cpudata structure, the now unused cpu
and cur_policy variables are removed.
For example, on a arm64 Juno platform with 6 CPUs: (0, 1, 2, 3) in PSD1,
(4, 5) in PSD2 - ANY coordination, the memory allocation comparison shows:
Before patch:
- ANY coordination:
total slack req alloc/free caller
0 0 0 0/1 _kernel_size_le_hi32+0x0xffff800008ff7810
0 0 0 0/6 _kernel_size_le_hi32+0x0xffff800008ff7808
128 80 48 1/0 _kernel_size_le_hi32+0x0xffff800008ffc070
768 0 768 6/0 _kernel_size_le_hi32+0x0xffff800008ffc0e4
After patch:
- ANY coordination:
total slack req alloc/free caller
256 0 256 2/0 _kernel_size_le_hi32+0x0xffff800008fed410
0 0 0 0/2 _kernel_size_le_hi32+0x0xffff800008fed274
Additional notes:
- A pointer to the policy's cppc_cpudata is stored in policy->driver_data
- Driver registration is skipped if _CPC entries are not present.
Signed-off-by: Ionela Voinescu <ionela.voinescu@arm.com>
Tested-by: Mian Yousaf Kaukab <ykaukab@suse.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
For errors parsing the _PSD domains, a separate domain is returned for
each CPU in the failed _PSD domain with no coordination (as per previous
comment). But contrary to the intention, the code was setting
CPUFREQ_SHARED_TYPE_ALL as coordination type.
Change shared_type to CPUFREQ_SHARED_TYPE_NONE in case of errors parsing
the domain information. The function still returns the error and the caller
is free to bail out the domain initialisation altogether in that case.
Given that both functions return domains with a single CPU, this change
does not affect the functionality, but clarifies the intention.
Signed-off-by: Ionela Voinescu <ionela.voinescu@arm.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
[ rjw: Subject edit ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* acpi-apei:
ACPI, APEI: make apei_resources_all static
* acpi-misc:
ACPI: acpi_drivers.h: Update the kernel doc
ACPI: acpi_drivers.h: Remove the leftover dead code
ACPI: tiny-power-button: Simplify the code using module_acpi_driver()
ACPI: SBS: Simplify the code using module_acpi_driver()
ACPI: SBS: Simplify the driver init code
ACPI: debug: Remove the not used function
ACPI: processor: Remove the duplicated ACPI_PROCESSOR_CLASS macro
* acpi-processor:
ACPI: processor: Drop duplicate setting of shared_cpu_map
* acpi-resources:
Revert "ACPI / resources: Use AE_CTRL_TERMINATE to terminate resources walks"
resource: provide meaningful MODULE_LICENSE() in test suite
ASoC: Intel: catpt: Replace open coded variant of resource_intersection()
ACPI: watchdog: Replace open coded variant of resource_union()
PCI/ACPI: Replace open coded variant of resource_union()
resource: Add test cases for new resource API
resource: Introduce resource_intersection() for overlapping resources
resource: Introduce resource_union() for overlapping resources
resource: Group resource_overlaps() with other inline helpers
resource: Simplify region_intersects() by reducing conditionals
* acpi-docs:
Documentation: ACPI: enumeration: add PCI hierarchy representation
Documentation: ACPI: _DSD: enable hyperlink in final references
Documentation: ACPI: explain how to use gpio-line-names
* acpica:
ACPICA: Update version to 20201113
ACPICA: Interpreter: fix memory leak by using existing buffer
ACPICA: Add function trace macros to improve debugging
ACPICA: Also handle "orphan" _REG methods for GPIO OpRegions
ACPICA: Remove extreaneous "the" in comments
ACPICA: Add 5 new UUIDs to the known UUID table
* acpi-scan:
ACPI: scan: Fix up _DEP-related terminology with supplier/consumer
ACPI: scan: Drop INT3396 from acpi_ignore_dep_ids[]
ACPI: scan: Add PNP0D80 to the _DEP exceptions list
ACPI: scan: Call acpi_get_object_info() from acpi_add_single_object()
ACPI: scan: Add acpi_info_matches_hids() helper
* pm-sleep:
PM: sleep: Add dev_wakeup_path() helper
PM / suspend: fix kernel-doc markup
PM: sleep: Print driver flags for all devices during suspend/resume
* pm-acpi:
PM: ACPI: Refresh wakeup device power configuration every time
PM: ACPI: PCI: Drop acpi_pm_set_bridge_wakeup()
PM: ACPI: reboot: Use S5 for reboot
* pm-domains:
PM: domains: create debugfs nodes when adding power domains
PM: domains: replace -ENOTSUPP with -EOPNOTSUPP
* powercap:
powercap: Adjust printing the constraint name with new line
powercap: RAPL: Add AMD Fam19h RAPL support
powercap: Add AMD Fam17h RAPL support
powercap/intel_rapl_msr: Convert rapl_msr_priv into pointer
x86/msr-index: sort AMD RAPL MSRs by address
- migrate_disable/enable() support which originates from the RT tree and
is now a prerequisite for the new preemptible kmap_local() API which aims
to replace kmap_atomic().
- A fair amount of topology and NUMA related improvements
- Improvements for the frequency invariant calculations
- Enhanced robustness for the global CPU priority tracking and decision
making
- The usual small fixes and enhancements all over the place
-----BEGIN PGP SIGNATURE-----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=Oz1V
-----END PGP SIGNATURE-----
Merge tag 'sched-core-2020-12-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Thomas Gleixner:
- migrate_disable/enable() support which originates from the RT tree
and is now a prerequisite for the new preemptible kmap_local() API
which aims to replace kmap_atomic().
- A fair amount of topology and NUMA related improvements
- Improvements for the frequency invariant calculations
- Enhanced robustness for the global CPU priority tracking and decision
making
- The usual small fixes and enhancements all over the place
* tag 'sched-core-2020-12-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (61 commits)
sched/fair: Trivial correction of the newidle_balance() comment
sched/fair: Clear SMT siblings after determining the core is not idle
sched: Fix kernel-doc markup
x86: Print ratio freq_max/freq_base used in frequency invariance calculations
x86, sched: Use midpoint of max_boost and max_P for frequency invariance on AMD EPYC
x86, sched: Calculate frequency invariance for AMD systems
irq_work: Optimize irq_work_single()
smp: Cleanup smp_call_function*()
irq_work: Cleanup
sched: Limit the amount of NUMA imbalance that can exist at fork time
sched/numa: Allow a floating imbalance between NUMA nodes
sched: Avoid unnecessary calculation of load imbalance at clone time
sched/numa: Rename nr_running and break out the magic number
sched: Make migrate_disable/enable() independent of RT
sched/topology: Condition EAS enablement on FIE support
arm64: Rebuild sched domains on invariance status changes
sched/topology,schedutil: Wrap sched domains rebuild
sched/uclamp: Allow to reset a task uclamp constraint value
sched/core: Fix typos in comments
Documentation: scheduler: fix information on arch SD flags, sched_domain and sched_debug
...
- Expose tag address bits in siginfo. The original arm64 ABI did not
expose any of the bits 63:56 of a tagged address in siginfo. In the
presence of user ASAN or MTE, this information may be useful. The
implementation is generic to other architectures supporting tags (like
SPARC ADI, subject to wiring up the arch code). The user will have to
opt in via sigaction(SA_EXPOSE_TAGBITS) so that the extra bits, if
available, become visible in si_addr.
- Default to 32-bit wide ZONE_DMA. Previously, ZONE_DMA was set to the
lowest 1GB to cope with the Raspberry Pi 4 limitations, to the
detriment of other platforms. With these changes, the kernel scans the
Device Tree dma-ranges and the ACPI IORT information before deciding
on a smaller ZONE_DMA.
- Strengthen READ_ONCE() to acquire when CONFIG_LTO=y. When building
with LTO, there is an increased risk of the compiler converting an
address dependency headed by a READ_ONCE() invocation into a control
dependency and consequently allowing for harmful reordering by the
CPU.
- Add CPPC FFH support using arm64 AMU counters.
- set_fs() removal on arm64. This renders the User Access Override (UAO)
ARMv8 feature unnecessary.
- Perf updates: PMU driver for the ARM DMC-620 memory controller, sysfs
identifier file for SMMUv3, stop event counters support for i.MX8MP,
enable the perf events-based hard lockup detector.
- Reorganise the kernel VA space slightly so that 52-bit VA
configurations can use more virtual address space.
- Improve the robustness of the arm64 memory offline event notifier.
- Pad the Image header to 64K following the EFI header definition
updated recently to increase the section alignment to 64K.
- Support CONFIG_CMDLINE_EXTEND on arm64.
- Do not use tagged PC in the kernel (TCR_EL1.TBID1==1), freeing up 8
bits for PtrAuth.
- Switch to vmapped shadow call stacks.
- Miscellaneous clean-ups.
-----BEGIN PGP SIGNATURE-----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=zXFk
-----END PGP SIGNATURE-----
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Catalin Marinas:
- Expose tag address bits in siginfo. The original arm64 ABI did not
expose any of the bits 63:56 of a tagged address in siginfo. In the
presence of user ASAN or MTE, this information may be useful. The
implementation is generic to other architectures supporting tags
(like SPARC ADI, subject to wiring up the arch code). The user will
have to opt in via sigaction(SA_EXPOSE_TAGBITS) so that the extra
bits, if available, become visible in si_addr.
- Default to 32-bit wide ZONE_DMA. Previously, ZONE_DMA was set to the
lowest 1GB to cope with the Raspberry Pi 4 limitations, to the
detriment of other platforms. With these changes, the kernel scans
the Device Tree dma-ranges and the ACPI IORT information before
deciding on a smaller ZONE_DMA.
- Strengthen READ_ONCE() to acquire when CONFIG_LTO=y. When building
with LTO, there is an increased risk of the compiler converting an
address dependency headed by a READ_ONCE() invocation into a control
dependency and consequently allowing for harmful reordering by the
CPU.
- Add CPPC FFH support using arm64 AMU counters.
- set_fs() removal on arm64. This renders the User Access Override
(UAO) ARMv8 feature unnecessary.
- Perf updates: PMU driver for the ARM DMC-620 memory controller, sysfs
identifier file for SMMUv3, stop event counters support for i.MX8MP,
enable the perf events-based hard lockup detector.
- Reorganise the kernel VA space slightly so that 52-bit VA
configurations can use more virtual address space.
- Improve the robustness of the arm64 memory offline event notifier.
- Pad the Image header to 64K following the EFI header definition
updated recently to increase the section alignment to 64K.
- Support CONFIG_CMDLINE_EXTEND on arm64.
- Do not use tagged PC in the kernel (TCR_EL1.TBID1==1), freeing up 8
bits for PtrAuth.
- Switch to vmapped shadow call stacks.
- Miscellaneous clean-ups.
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (78 commits)
perf/imx_ddr: Add system PMU identifier for userspace
bindings: perf: imx-ddr: add compatible string
arm64: Fix build failure when HARDLOCKUP_DETECTOR_PERF is enabled
arm64: mte: fix prctl(PR_GET_TAGGED_ADDR_CTRL) if TCF0=NONE
arm64: mark __system_matches_cap as __maybe_unused
arm64: uaccess: remove vestigal UAO support
arm64: uaccess: remove redundant PAN toggling
arm64: uaccess: remove addr_limit_user_check()
arm64: uaccess: remove set_fs()
arm64: uaccess cleanup macro naming
arm64: uaccess: split user/kernel routines
arm64: uaccess: refactor __{get,put}_user
arm64: uaccess: simplify __copy_user_flushcache()
arm64: uaccess: rename privileged uaccess routines
arm64: sdei: explicitly simulate PAN/UAO entry
arm64: sdei: move uaccess logic to arch/arm64/
arm64: head.S: always initialize PSTATE
arm64: head.S: cleanup SCTLR_ELx initialization
arm64: head.S: rename el2_setup -> init_kernel_el
arm64: add C wrappers for SET_PSTATE_*()
...
The functionality of acpi_dev_irqresource_disabled() is same as in common
irqresource_disabled(), so drop acpi_dev_irqresource_disabled() in favour
of that function.
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/1606905417-183214-4-git-send-email-john.garry@huawei.com
This is the first pass in creating the ability to calculate the
frequency invariance on AMD systems. This approach uses the CPPC
highest performance and nominal performance values that range from
0 - 255 instead of a high and base frquency. This is because we do
not have the ability on AMD to get a highest frequency value.
On AMD systems the highest performance and nominal performance
vaues do correspond to the highest and base frequencies for the system
so using them should produce an appropriate ratio but some tweaking
is likely necessary.
Due to CPPC being initialized later in boot than when the frequency
invariant calculation is currently made, I had to create a callback
from the CPPC init code to do the calculation after we have CPPC
data.
Special thanks to "kernel test robot <lkp@intel.com>" for reporting that
compilation of drivers/acpi/cppc_acpi.c is conditional to
CONFIG_ACPI_CPPC_LIB, not just CONFIG_ACPI.
[ ggherdovich@suse.cz: made safe under CPU hotplug, edited changelog. ]
Signed-off-by: Nathan Fontenot <nathan.fontenot@amd.com>
Signed-off-by: Giovanni Gherdovich <ggherdovich@suse.cz>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lkml.kernel.org/r/20201112182614.10700-2-ggherdovich@suse.cz
There are multiple locations in the kernel where a struct fwnode_handle
is initialized. Add fwnode_init() so that we have one way of
initializing a fwnode_handle.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Saravana Kannan <saravanak@google.com>
Link: https://lore.kernel.org/r/20201121020232.908850-8-saravanak@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The ACPI namespace scanning code uses the terms master/slave when
populating the list of _DEP dependencies, but that use has no
external exposures and is not mandated by nor associated with any
external specifications.
Change the language used through-out to supplier/consumer.
No functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
According to Hans, all device objects where the _HID returns
"INT3396" also have a _CID returning "PNP0D80", so the former
need not be present in acpi_ignore_dep_ids[] any more.
Link: https://lore.kernel.org/linux-acpi/52a2b98c-6bf3-760b-eca9-93cf05fb4877@redhat.com/
Suggested-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
The GIGABYTE GB-BXBT-2807 is a mini-PC which uses off the shelf
components, like an Intel GPU which is meant for mobile systems.
As such, it, by default, has a backlight controller exposed.
Unfortunately, the backlight controller only confuses userspace, which
sees the existence of a backlight device node and has the unrealistic
belief that there is actually a backlight there!
Add a DMI quirk to force the backlight off on this system.
Signed-off-by: Jasper St. Pierre <jstpierre@mecheye.net>
Reviewed-by: Chris Chiu <chiu@endlessos.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This reverts commit 8a66790b78.
Switching this function to AE_CTRL_TERMINATE broke the documented
behaviour of acpi_dev_get_resources() - AE_CTRL_TERMINATE does not, in
fact, terminate the resource walk because acpi_walk_resource_buffer()
ignores it (specifically converting it to AE_OK), referring to that
value as "an OK termination by the user function". This means that
acpi_dev_get_resources() does not abort processing when the preproc
function returns a negative value.
Signed-off-by: Daniel Scally <djrscally@gmail.com>
Cc: 3.10+ <stable@vger.kernel.org> # 3.10+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The PNP0D80 ("Windows-compatible System Power Management Controller")
device ID is used for identifying the special device object providing
the LPI (Low-power S0 Idle) _DSM interface [1]. That device object
does not supply any operation regions, but it appears in _DEP lists
for other devices in the ACPI tables on some systems to enforce
specific enumeration ordering that does not matter for Linux.
For this reason, _DEP list entries pointing to the device object whose
_CID returns PNP0D80 need not be taken into account as real operation
region dependencies, so add that device ID to the list of device IDs
for which the matching _DEP list entries should be ignored.
Accordingly, update the function used for matching device IDs in that
list to allow it to check _CID as well as _HID and rename it to
acpi_info_matches_ids().
Link: https://www.uefi.org/sites/default/files/resources/Intel_ACPI_Low_Power_S0_Idle.pdf # [1]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
When wakeup signaling is enabled for a bridge for the second (or every
next) time in a row, its existing device wakeup power configuration
may not match the new conditions. For example, some devices below
it may have been put into low-power states and that changes the
device wakeup power conditions or similar. This causes functional
problems to appear on some systems (for example, because of it the
Thunderbolt port on Dell Precision 5550 cannot detect devices plugged
in after it has been suspended).
For this reason, modify __acpi_device_wakeup_enable() to refresh the
device wakeup power configuration of the target device on every
invocation, not just when it is called for that device first time
in a row.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reported-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
The idea behind acpi_pm_set_bridge_wakeup() was to allow bridges to
be reference counted for wakeup enabling, because they may be enabled
to signal wakeup on behalf of their subordinate devices and that
may happen for multiple times in a row, whereas for the other devices
it only makes sense to enable wakeup signaling once.
However, this becomes problematic if the bridge itself is suspended,
because it is treated as a "regular" device in that case and the
reference counting doesn't work.
For instance, suppose that there are two devices below a bridge and
they both can signal wakeup. Every time one of them is suspended,
wakeup signaling is enabled for the bridge, so when they both have
been suspended, the bridge's wakeup reference counter value is 2.
Say that the bridge is suspended subsequently and acpi_pci_wakeup()
is called for it. Because the bridge can signal wakeup, that
function will invoke acpi_pm_set_device_wakeup() to configure it
and __acpi_pm_set_device_wakeup() will be called with the last
argument equal to 1. This causes __acpi_device_wakeup_enable()
invoked by it to omit the reference counting, because the reference
counter of the target device (the bridge) is 2 at that time.
Now say that the bridge resumes and one of the device below it
resumes too, so the bridge's reference counter becomes 0 and
wakeup signaling is disabled for it, but there is still the other
suspended device which may need the bridge to signal wakeup on its
behalf and that is not going to work.
To address this scenario, use wakeup enable reference counting for
all devices, not just for bridges, so drop the last argument from
__acpi_device_wakeup_enable() and __acpi_pm_set_device_wakeup(),
which causes acpi_pm_set_device_wakeup() and
acpi_pm_set_bridge_wakeup() to become identical, so drop the latter
and use the former instead of it everywhere.
Fixes: 1ba51a7c14 ("ACPI / PCI / PM: Rework acpi_pci_propagate_wakeup()")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: 4.14+ <stable@vger.kernel.org> # 4.14+
Call acpi_get_object_info() from acpi_add_single_object() instead of
calling it from acpi_set_pnp_ids() and pass the result down to the
latter so as to allow acpi_add_single_object() to use that data for
other purposes.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
[ rjw: Changelog rewrite ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
acpi_device_dep_initialize() disergards _DEP "suppliers" with a _HID
of "INT3396" and checks this using an acpi_device_info struct.
Because in general there are other device IDs that need to be treated
in the same way, add acpi_info_matches_hids() which checks a list of
_HIDs for this purpose and switch acpi_device_dep_initialize() over
to using it.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
[ rjw: Changelog rewrite ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 52d1da5dcbd79a722b70f02a1a83f04088f51ff6
There was a memory leak that ocurred when a _CID object is defined as
a package containing string objects. When _CID is checked for any
possible repairs, it calls a helper function to repair _HID (because
_CID basically contains multiple _HID entries).
The _HID repair function assumes that string objects are standalone
objects that are not contained inside of any packages. The _HID
repair function replaces the string object with a brand new object
and attempts to delete the old object by decrementing the reference
count of the old object. Strings inside of packages have a reference
count of 2 so the _HID repair function leaves this object in a
dangling state and causes a memory leak.
Instead of allocating a brand new object and removing the old object,
use the existing object when repairing the _HID object.
Link: https://github.com/acpica/acpica/commit/52d1da5d
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 87b8dba05b4cf8c111948327023c710e2b6b5a05
The namespace repair mechanism does not have function tracing macros.
Add several trace macros to improve debuggability.
Link: https://github.com/acpica/acpica/commit/87b8dba0
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit b9dc31e2fc67cf196fab5253a9a673bee68b2ef5
Before this commit acpi_ev_execute_reg_methods() had special handling
to handle "orphan" (no matching op_region declared) _REG methods for EC
nodes.
On Intel Cherry Trail devices there are 2 possible ACPI op_regions for
accessing GPIOs. The standard general_purpose_io op_region and the Cherry
Trail specific user_defined 0x9X op_regions.
Having 2 different types of op_regions leads to potential issues with
checks for op_region availability, or in other words checks if _REG has
been called for the op_region which the ACPI code wants to use.
Except for the "orphan" EC handling, ACPICA core does not call _REG on
an ACPI node which does not define an op_region matching the type being
registered; and the reference design DSDT, from which most Cherry Trail
DSDTs are derived, does not define general_purpose_io, nor user_defined(0x93)
op_regions for the GPO2 (UID 3) device, because no pins were assigned ACPI
controlled functions in the reference design.
Together this leads to the perfect storm, at least on the Cherry Trail
based Medion Akayo E1239T. This design does use a GPO2 pin from its ACPI
code and has added the Cherry Trail specific user_defined(0x93) opregion
to its GPO2 ACPI node to access this pin.
But it uses a has _REG been called availability check for the standard
general_purpose_io op_region. This clearly is a bug in the DSDT, but this
does work under Windows. This issue leads to the intel_vbtn driver
reporting the device always being in tablet-mode at boot, even if it
is in laptop mode. Which in turn causes userspace to ignore touchpad
events. So iow this issues causes the touchpad to not work at boot.
This commit fixes this by extending the "orphan" _REG method handling
to also apply to GPIO address-space handlers.
Note it seems that Windows always calls "orphan" _REG methods so me
may want to consider dropping the space-id check and always do
"orphan" _REG method handling.
Link: https://github.com/acpica/acpica/commit/b9dc31e2
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit f6eae3961bf39ad8beda70c001d1815780600e39
There are several ocurrances of "the the", remove the extraneous
"the".
Link: https://github.com/acpica/acpica/commit/f6eae396
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
- Fix kerneldoc warnings generated by ACPI IORT code
- Fix pte_accessible() so that access flag is ignored
- Fix missing header #include
- Fix loss of software dirty bit across pte_wrprotect() when HW DBM is enabled
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAl/A4moQHHdpbGxAa2Vy
bmVsLm9yZwAKCRC3rHDchMFjNKhtB/4kdY/Do6h8ivkVNy1oId9mWSHrk9HwoEmS
wFvyTIuyhaS2NlNW2/9V662e+wWhzv0ULkDu6aSVsnuw88b1yz1X2ytuh/t8beMJ
PZGWO9UUuVuf+YjcaI7ygppXHILQWdau8eyOVMTciMOYYZRdIqex8WPApxpATRO4
7TphGUuo0IH0GGwq4u6JhPrT0Ihr9txWnvqnM8+fP/y3IbFncH+GKjxZq0k0BwcK
1fkIINwRFHmvkPouPyRPzE6DBudIlHPMGS68CXJV5/T4+JQ5bjc/bmAm8AYVVgip
xSUeKg/x7AMF/8vho0pnvxAqh0FF6c370EjiKBk6AIGNJhjdROxt
=e2/i
-----END PGP SIGNATURE-----
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"The main changes are relating to our handling of access/dirty bits,
where our low-level page-table helpers could lead to stale young
mappings and loss of the dirty bit in some cases (the latter has not
been observed in practice, but could happen when clearing "soft-dirty"
if we enabled that). These were posted as part of a larger series, but
the rest of that is less urgent and needs a v2 which I'll get to
shortly.
In other news, we've now got a set of fixes to resolve the
lockdep/tracing problems that have been plaguing us for a while, but
they're still a bit "fresh" and I plan to send them to you next week
after we've got some more confidence in them (although initial CI
results look good).
Summary:
- Fix kerneldoc warnings generated by ACPI IORT code
- Fix pte_accessible() so that access flag is ignored
- Fix missing header #include
- Fix loss of software dirty bit across pte_wrprotect() when HW DBM
is enabled"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: pgtable: Ensure dirty bit is preserved across pte_wrprotect()
arm64: pgtable: Fix pte_accessible()
ACPI/IORT: Fix doc warnings in iort.c
arm64/fpsimd: add <asm/insn.h> to <asm/kprobes.h> to fix fpsimd build
'shared_cpu_map', stored as part of the per-processor
acpi_processor_performance structre, is used to store CPUs that share
a performance domain. By definition it contains the owning CPU.
While building the 'shared_cpu_map' it is being set twice - once while
initialising the performance domains and again when matching CPUs
belonging to the same domain.
Drop the unnecessary initialisation.
Signed-off-by: Punit Agrawal <punitagrawal@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Dan reports that smatch thinks userspace can craft an out-of-bound bus
family number. However, nd_cmd_clear_to_send() blocks all non-zero
values of bus-family since only the kernel can initiate these commands.
However, in the speculation path, family is a user controlled array
index value so mask it for speculation safety. Also, since the
nd_cmd_clear_to_send() safety is non-obvious and possibly may change in
the future include input validation as if userspace could get past the
nd_cmd_clear_to_send() gatekeeper.
Link: http://lore.kernel.org/r/20201111113000.GA1237157@mwanda
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: 6450ddbd5d ("ACPI: NFIT: Define runtime firmware activation commands")
Cc: <stable@vger.kernel.org>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Eliminate comparisons from the status flags checks in
advance_transaction() (especially from the one that is only correct,
because the value of the flag checked in there is 1) and rearrange
the code for more clarity while at it.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Introduce acpi_ec_spurious_interrupt() for recording spurious
interrupts and use it for error handling in advance_transaction(),
drop the (now redundant) original error handling block from there
along with a frew goto statements that are not necessary any more.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Notice that the value of t in advance_transaction() does not change
after its initialization and:
- Initialize t upfront (and rearrange the definitions of local
variables while at it).
- Check it against NULL in a block executed when it is NULL.
- Skip error handling for t == NULL, because a valid pointer value
of t is required for the error handling.
- Drop the (now redundant) check of t against NULL from the error
handling block and reduce the indentation level in there.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Rename acpi_ec_is_gpe_raised() into acpi_ec_gpe_status_set(),
update its callers accordingly and drop the ternary operator
(which isn't really necessary in there) from it.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Fold acpi_ec_clear_gpe() which is only used in one place into its
caller and clean up comments related to that function while at it.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
advance_transaction() is using in_interrupt() to distinguish between
an invocation from the interrupt handler and an invocation from
another part of the stack.
This looks misleading because chains like
acpi_update_all_gpes() -> acpi_ev_gpe_detect() ->
acpi_ev_detect_gpe() -> acpi_ec_gpe_handler()
should probably also behave as if they were called from an interrupt
handler.
Replace in_interrupt() usage with a function parameter.
Set this parameter to `true' if invoked from an interrupt handler
(acpi_ec_gpe_handler() and acpi_ec_irq_handler()) and `false'
otherwise.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
[ rjw: Subject edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Fix following warnings caused by mismatch between
function parameters and function comments.
drivers/acpi/arm64/iort.c:55: warning: Function parameter or member 'iort_node' not described in 'iort_set_fwnode'
drivers/acpi/arm64/iort.c:55: warning: Excess function parameter 'node' description in 'iort_set_fwnode'
drivers/acpi/arm64/iort.c:682: warning: Function parameter or member 'id' not described in 'iort_get_device_domain'
drivers/acpi/arm64/iort.c:682: warning: Function parameter or member 'bus_token' not described in 'iort_get_device_domain'
drivers/acpi/arm64/iort.c:682: warning: Excess function parameter 'req_id' description in 'iort_get_device_domain'
drivers/acpi/arm64/iort.c:1142: warning: Function parameter or member 'dma_size' not described in 'iort_dma_setup'
drivers/acpi/arm64/iort.c:1142: warning: Excess function parameter 'size' description in 'iort_dma_setup'
drivers/acpi/arm64/iort.c:1534: warning: Function parameter or member 'ops' not described in 'iort_add_platform_device'
Signed-off-by: Shiju Jose <shiju.jose@huawei.com>
Acked-by: Hanjun Guo <guohanjun@huawei.com>
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Link: https://lore.kernel.org/r/20201014093139.1580-1-shiju.jose@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
We recently introduced a 1 GB sized ZONE_DMA to cater for platforms
incorporating masters that can address less than 32 bits of DMA, in
particular the Raspberry Pi 4, which has 4 or 8 GB of DRAM, but has
peripherals that can only address up to 1 GB (and its PCIe host
bridge can only access the bottom 3 GB)
Instructing the DMA layer about these limitations is straight-forward,
even though we had to fix some issues regarding memory limits set in
the IORT for named components, and regarding the handling of ACPI _DMA
methods. However, the DMA layer also needs to be able to allocate
memory that is guaranteed to meet those DMA constraints, for bounce
buffering as well as allocating the backing for consistent mappings.
This is why the 1 GB ZONE_DMA was introduced recently. Unfortunately,
it turns out the having a 1 GB ZONE_DMA as well as a ZONE_DMA32 causes
problems with kdump, and potentially in other places where allocations
cannot cross zone boundaries. Therefore, we should avoid having two
separate DMA zones when possible.
So let's do an early scan of the IORT, and only create the ZONE_DMA
if we encounter any devices that need it. This puts the burden on
the firmware to describe such limitations in the IORT, which may be
redundant (and less precise) if _DMA methods are also being provided.
However, it should be noted that this situation is highly unusual for
arm64 ACPI machines. Also, the DMA subsystem still gives precedence to
the _DMA method if implemented, and so we will not lose the ability to
perform streaming DMA outside the ZONE_DMA if the _DMA method permits
it.
[nsaenz: unified implementation with DT's counterpart]
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Tested-by: Jeremy Linton <jeremy.linton@arm.com>
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Hanjun Guo <guohanjun@huawei.com>
Cc: Jeremy Linton <jeremy.linton@arm.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Hanjun Guo <guohanjun@huawei.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/r/20201119175400.9995-7-nsaenzjulienne@suse.de
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The ACPI_ALLOCATE() does not zero the "buf", so when the condition
"integer->type != ACPI_TYPE_INTEGER" in int_to_buf() is met, the result
is unpredictable in acpi_nfit_ctl().
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Link: https://lore.kernel.org/r/20201118073517.1884-1-thunder.leizhen@huawei.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Using module_acpi_driver() to simplify the code.
Signed-off-by: Hanjun Guo <guohanjun@huawei.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Using the module_acpi_driver() to simplify the code.
Signed-off-by: Hanjun Guo <guohanjun@huawei.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
acpi_bus_register_driver() will check acpi_disable and return
-ENODEV, so the acpi_disable check outside the
acpi_bus_register_driver() is duplicated, can be removed.
Also we can just return from acpi_bus_register_driver() then
we can simplify the code further.
Signed-off-by: Hanjun Guo <guohanjun@huawei.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The inline function __acpi_aml_opened() is not used anywhere,
remove it.
Signed-off-by: Hanjun Guo <guohanjun@huawei.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The ACPI_PROCESSOR_CLASS macro is defined in <acpi/processor.h>,
and ACPI drivers for processor already included <acpi/processor.h>,
so we can remove those duplicated ACPI_PROCESSOR_CLASS macros.
Signed-off-by: Hanjun Guo <guohanjun@huawei.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Since we have resource_union() helper, let's utilize it here.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Hanjun Guo <guohanjun@huawei.com>
Tested-by: Hanjun Guo <guohanjun@huawei.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Since we have resource_union() helper, let's utilize it here.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Reviewed-by: Hanjun Guo <guohanjun@huawei.com>
Tested-by: Hanjun Guo <guohanjun@huawei.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
From commit 6915564dc5 ("ACPI: OSL: Change the type of
acpi_os_map_generic_address() return value"),
acpi_os_map_generic_address() will return logical address or NULL
for error, but for ACPI_ADR_SPACE_SYSTEM_IO case, it should be also
return 0 as it's a normal case, but now it will return -ENXIO.
So check it out for such case to avoid einj module initialization
fail.
Fixes: 6915564dc5 ("ACPI: OSL: Change the type of acpi_os_map_generic_address() return value")
Cc: <stable@vger.kernel.org>
Reviewed-by: James Morse <james.morse@arm.com>
Tested-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Aili Yao <yaoaili@kingsoft.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The following warning is reported if lock debugging is enabled.
DEBUG_LOCKS_WARN_ON(1)
WARNING: CPU: 1 PID: 1 at kernel/locking/lockdep.c:4617 lockdep_init_map_waits+0x141/0x222
...
Call Trace:
__kernfs_create_file+0x7a/0xd8
sysfs_add_file_mode_ns+0x135/0x189
sysfs_create_file_ns+0x70/0xa0
acpi_fan_probe+0x547/0x621
platform_drv_probe+0x67/0x8b
...
Dynamically allocated sysfs attributes need to be initialized to avoid
the warning.
Fixes: d19e470b66 ("ACPI: fan: Expose fan performance state information")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Cc: 5.6+ <stable@vger.kernel.org> # 5.6+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Add Alder Lake ACPI IDs for DPTF devices.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
