Track the plane fifo sizes under intel_crtc instead of under each
intel_plane. Avoids looping over the planes in a bunch of places,
and later we'll move this tracking into the crtc state properly.
v2: Nuke intel_plane_wm_parameters (Maarten)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170302171508.1666-3-ville.syrjala@linux.intel.com
In a lot of place we wish to know which planes on the crtc are actually
visible, or how many of them there are. Let's start tracking that in a
bitmask in the crtc state.
We already track enabled planes (ie. ones with an fb and crtc specified by
the user) but that's not quite the same thing as enabled planes may
still end up being invisible due to clipping and whatnot.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170302171508.1666-2-ville.syrjala@linux.intel.com
If we manage to tangle errorpaths and get call to callbacks,
it is better to defensively keep them as null until object init is
finished so that we get clean null deref on callsite,
instead of more cryptic wreckage with partly initialized vm objects.
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1488295691-9404-5-git-send-email-mika.kuoppala@intel.com
If we setup the vm size early, we can use the newly introduced
i915_vm_is_48bit() in majority of callsites wanting to know the vm size.
As we operate either with 3lvl or 4lvl page table structure,
wrap the vm size query inside a function which tells us if
4lvl setup is needed for particular vm, as the following
code uses the function names where level is noted.
v2: use_4lvl (Chris)
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1488295691-9404-3-git-send-email-mika.kuoppala@intel.com
The macro takes a vm pointer at some sites, and dev_priv on others
We were saved as the internal macro never deferences the pointer
given.
As the number of pdpes depend on vm configuration, make it
as a inline function that accepts vm pointer.
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wsilon.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1488295691-9404-1-git-send-email-mika.kuoppala@intel.com
During reset_all_global_seqno() on seqno rollover, we have to update the
HWS. This causes all in flight requests to be completed, so first we
wait. However, we were only waiting for the requests themselves to be
completed and clearing out the waiter rbtrees - what I had missed was
the extra reference in execlists->port[]. Since commit fe9ae7a3bf
("drm/i915/execlists: Detect an out-of-order context switch") we can
detect when the request is retired before the context switch interrupt
is completed. The impact should be neglible outside of debugging.
Testcase: igt/gem_exec_whisper
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170303121947.20482-1-chris@chris-wilson.co.uk
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
The logic to enable a DDI in intel_mst_pre_enable_dp() is essentially
the same as in intel_ddi_pre_enable_dp(). So reuse the latter function
by calling the post_disable hook on the intel_dig_port instead of
duplicating that code.
v2: Don't oops because of a NULL encoder->crtc. (Ville)
v3: Warn for MST + PORT_E too. (Ville)
Cc: Imre Deak <imre.deak@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170302125857.14665-8-ander.conselvan.de.oliveira@intel.com
Remove direct usages of intel_crtc->config from the DDI code. Functions
that didn't yet take a pipe_config as an argument were coverted to do
so.
v2: s/pipe_config/const crtc_state/ (Ville)
- take crtc from crtc_state. (Ville)
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170302125857.14665-7-ander.conselvan.de.oliveira@intel.com
Pass intel_crtc to functions intel_ddi_enable_transcoder_func(),
intel_ddi_set_pipe_settings() and intel_ddi_set_vc_payload_alloc(),
instead of the generic crtc type. By changing the functions
intel_ddi_get_crtc_encoder() so that it receives an intel_crtc
parameter, there is no need for the drm_crtc in the callers.
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170302125857.14665-6-ander.conselvan.de.oliveira@intel.com
It is preferred to pass pipe_config to functions instead of accessing
crtc->config directly. Follow suit and pass pipe_config to the fdi link
train functions.
v2: Add const; s/pipe_config/crtc_state/ (Ville)
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170302125857.14665-5-ander.conselvan.de.oliveira@intel.com
Using crtc->config directly is being removed in favor of passing a
pipe_config. Follow the trend and pass pipe_config to pch_enable()
functions.
v2: s/pipe_config/crtc_state/ (Ville)
- constify crtc_state. (Ville)
- take crtc from crtc_state. (Ville)
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170302125857.14665-4-ander.conselvan.de.oliveira@intel.com
Check timer_pending() as well as work_pending() to see if the timer for
the hangcheck has already expired and the work is pending execution on
some list somewhere.
v2: Use a more compact if-chain
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170303090056.19973-1-chris@chris-wilson.co.uk
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Pull vfs pile two from Al Viro:
- orangefs fix
- series of fs/namei.c cleanups from me
- VFS stuff coming from overlayfs tree
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
orangefs: Use RCU for destroy_inode
vfs: use helper for calling f_op->fsync()
mm: use helper for calling f_op->mmap()
vfs: use helpers for calling f_op->{read,write}_iter()
vfs: pass type instead of fn to do_{loop,iter}_readv_writev()
vfs: extract common parts of {compat_,}do_readv_writev()
vfs: wrap write f_ops with file_{start,end}_write()
vfs: deny copy_file_range() for non regular files
vfs: deny fallocate() on directory
vfs: create vfs helper vfs_tmpfile()
namei.c: split unlazy_walk()
namei.c: fold the check for DCACHE_OP_REVALIDATE into d_revalidate()
lookup_fast(): clean up the logics around the fallback to non-rcu mode
namei: fold unlazy_link() into its sole caller
Adding to the tail of the client request list as the only other user is
in the throttle ioctl that iterates forwards over the list. It only
needs protection against deletion of a request as it reads it, it simply
won't see a new request added to the end of the list, or it would be too
early and rejected. We can further reduce the number of spinlocks
required when throttling by removing stale requests from the client_list
as we throttle.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170302122525.19675-1-chris@chris-wilson.co.uk
Currently ILK-BDW explicitly disable LP1+ watermarks from their
.init_clock_gating() hooks. Unfortunately that hook gets called way too
late since by that time we've already initialized all the watermark
state tracking which then gets out of sync with the hardware state.
We may eventually want to consider killing off the explicit LP1+
disable from .init_clock_gating(). In the meantime however, we can
avoid the problem by reordering the init sequence such that
intel_modeset_init_hw()->intel_init_clock_gating() gets called
prior to the hardware state takeover.
I suppose prior to the two stage watermark programming we were
magically saved by something that forced the watermarks to be
reprogrammed fully after .init_clock_gating() got called. But
now that no longer happens.
Note that the diff might look a bit odd as it kills off one
call of intel_update_cdclk(), but that's fine because
intel_modeset_init_hw() does the exact same thing. Previously
we just did it twice.
Actually even this new init sequence is pretty bogus as
.init_clock_gating() really should be called before any gem
hardware init since it can configure various clock gating
workarounds and whatnot that affect the GT side as well. Also
intel_modeset_init() really should get split up into better
defined init stages. Another "fun" detail is that
intel_modeset_gem_init() is where RPS/RC6 gets configured.
Why that is done from the display code is beyond me. I've
decided to leave all this be for now, and just try to fix
the init sequence enough for watermarks to work.
Cc: stable@vger.kernel.org
Cc: Gabriele Mazzotta <gabriele.mzt@gmail.com>
Cc: David Purton <dcpurton@marshwiggle.net>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reported-by: Gabriele Mazzotta <gabriele.mzt@gmail.com>
Reported-by: David Purton <dcpurton@marshwiggle.net>
Tested-by: Gabriele Mazzotta <gabriele.mzt@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96645
Fixes: ed4a6a7ca8 ("drm/i915: Add two-stage ILK-style watermark programming (v11)")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170220140443.30891-1-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Useful for double checking that the device is powered up when it hung,
include both the status of the power management and our rpm wakelock.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170302151544.16915-1-chris@chris-wilson.co.uk
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Whilst investigating some mysterious failures with hangcheck not running
during gem_busy/basic-hang-default, the question is why did we decide to
cancel the retire_work (which queues the hangcheck)? That decision is
based around GT activity, so include that information in the debug
report.
v2: Include the GT awake status in the error state
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170302150356.9713-1-chris@chris-wilson.co.uk
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
assert_spin_locked() becomes an unconditionally compiled BUG_ON(),
adding debug code right into the heart of critical routines like
interrupt handlers.
text data bss dec hex
1296480 19944 2272 1318696 141f28 before (lockdep disabled)
1295984 19944 2272 1318200 141d38 after
1336261 21139 3208 1360608 14c2e0 before (lockdep enabled)
1339920 21139 3208 1364267 14d12b after
Small saving for release; hopefully more instructive in debug.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170302132801.599-1-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Everytime we take the fence->lock (aka request->lock), we must do so
with irqs disabled since it may be used from within an hardirq context.
As sometimes we are taking the lock in a nested manner, assert that the
caller did disable the irqs for us.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170302115130.28434-1-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Listen for PMIC bus access notifications and get FORCEWAKE_ALL while
the bus is accessed to avoid needing to do any forcewakes, which need
PMIC bus access, while the PMIC bus is busy:
This fixes errors like these showing up in dmesg, usually followed
by a gfx or system freeze:
[drm:fw_domains_get [i915]] *ERROR* render: timed out waiting for forcewake ack request.
[drm:fw_domains_get [i915]] *MEDIA* render: timed out waiting for forcewake ack request.
i2c_designware 808622C1:06: punit semaphore timed out, resetting
i2c_designware 808622C1:06: PUNIT SEM: 2
i2c_designware 808622C1:06: couldn't acquire bus ownership
Downside of this approach is that it causes wakeups whenever the PMIC
bus is accessed. Unfortunately we cannot simply wait for the PMIC bus
to go idle when we hit a race, as forcewakes may be done from interrupt
handlers where we cannot sleep to wait for the i2c PMIC bus access to
finish.
Note that the notifications and thus the wakeups will only happen on
baytrail / cherrytrail devices using PMICs with a shared i2c bus for
P-Unit and host PMIC access (i2c busses with a _SEM method in their
APCI node), e.g. an axp288 PMIC.
I plan to write some patches for drivers accessing the PMIC bus to
limit their bus accesses to a bare minimum (e.g. cache registers, do not
update battery level more often then 4 times a minute), to limit the
amount of wakeups.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=155241
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: tagorereddy <tagore.chandan@gmail.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
[danvet: Wiggle in conflicts.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Rename intel_uncore_early_sanitize to intel_uncore_resume, dropping the
(always true) restore_forcewake argument and add a new intel_uncore_resume
function to replace the intel_uncore_forcewake_reset(dev_priv, false)
calls done from the suspend / runtime_suspend functions and make
intel_uncore_forcewake_reset private.
This is a preparation patch for adding PMIC bus access notifier support.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=155241
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: tagorereddy <tagore.chandan@gmail.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170210102802.20898-12-hdegoede@redhat.com
In order to make cursor updates actually safe wrt. watermark programming
we have to clear the legacy_cursor_update flag in the atomic state. That
will cause the regular atomic update path to do the necessary vblank
wait after the plane update if needed, otherwise the vblank wait would
be skipped and we'd feed the optimal watermarks to the hardware before
the plane update has actually happened.
To make the slow vs. fast path determination in
intel_legacy_cursor_update() a little simpler we can ignore the actual
visibility of the plane (which can only get computed once we've already
chosen out path) and instead we simply check whether the fb is being
set or cleared by the user. This means a fully clipped but logically
visible cursor will be considered visible as far as watermark
programming is concerned. We can do that for the cursor since it's a
fixed size plane and the clipped size doesn't play a role in the
watermark computation.
This should fix underruns that can occur when the cursor gets
enable/disabled or the size gets changed. Hopefully it's good enough
that only pure cursor movement and flips go through unthrottled.
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Uwe Kleine-König <uwe@kleine-koenig.org>
Reported-by: Uwe Kleine-König <uwe@kleine-koenig.org>
Fixes: f79f26921e ("drm/i915: Add a cursor hack to allow converting legacy page flip to atomic, v3.")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170217150159.11683-1-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Tested-by: Rafael Ristovski <rafael.ristovski@gmail.com>
One of the if statement covers the next line in enable I/O sequence.
This patch correct the same by adding error message.
Fixes: 4644848369 ("drm/i915/glk: Add MIPIIO Enable/disable sequence")
Reported-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Madhav Chauhan <madhav.chauhan@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1488393082-30660-1-git-send-email-madhav.chauhan@intel.com
Return silently without producing much noise on platforms
that have a HuC but the firmware is absent.
Cc: Ander Conselvan De Oliveira <ander.conselvan.de.oliveira@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@itel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com>
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1488398335-13121-1-git-send-email-anusha.srivatsa@intel.com
A long time ago we turned off the warning as it was too painful, we had
too much broken code. Turn it back on now as we are mostly clean and
need to prevent returning to such orangeness.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Imre Deak <imre.deak@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170302074157.21631-2-chris@chris-wilson.co.uk
Reviewed-by: Imre Deak <imre.deak@intel.com>
Commit 62b695662a ("drm/i915: Only enable DDI IO power domains after
enabling DPLL") changed how the DDI IO power domains get enabled, but
neglected the need to enable those domains when enabling a DP connector
with MST enabled, leading to
Kernel panic - not syncing: Timeout: Not all CPUs entered broadcast exception handler
Fixes: 62b695662a ("drm/i915: Only enable DDI IO power domains after enabling DPLL")
Cc: Imre Deak <imre.deak@intel.com>
Cc: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Cc: David Weinehall <david.weinehall@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: intel-gfx@lists.freedesktop.org
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170301141318.3607-2-ander.conselvan.de.oliveira@intel.com
This reverts commit 233ce881dd.
I assumed it's ok, but really should have double-checked - CI caught
tons of fail :(
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Acked-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170301171749.13053-1-daniel.vetter@ffwll.ch
Instead of including the full <linux/signal.h>, we are going to include the
types-only <linux/signal_types.h> header in <linux/sched.h>, to further
decouple the scheduler header from the signal headers.
This means that various files which relied on the full <linux/signal.h> need
to be updated to gain an explicit dependency on it.
Update the code that relies on sched.h's inclusion of the <linux/signal.h> header.
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
We are going to split <linux/sched/mm.h> out of <linux/sched.h>, which
will have to be picked up from other headers and a couple of .c files.
Create a trivial placeholder <linux/sched/mm.h> file that just
maps to <linux/sched.h> to make this patch obviously correct and
bisectable.
The APIs that are going to be moved first are:
mm_alloc()
__mmdrop()
mmdrop()
mmdrop_async_fn()
mmdrop_async()
mmget_not_zero()
mmput()
mmput_async()
get_task_mm()
mm_access()
mm_release()
Include the new header in the files that are going to need it.
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
We are going to move scheduler ABI details to <uapi/linux/sched/types.h>,
which will be used from a number of .c files.
Create empty placeholder header that maps to <linux/types.h>.
Include the new header in the files that are going to need it.
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
We are going to split <linux/sched/clock.h> out of <linux/sched.h>, which
will have to be picked up from other headers and .c files.
Create a trivial placeholder <linux/sched/clock.h> file that just
maps to <linux/sched.h> to make this patch obviously correct and
bisectable.
Include the new header in the files that are going to need it.
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
the ro_mask is not stored into each mmio entry
Fixes: 12d14cc43b ("drm/i915/gvt: Introduce a framework for tracking HW registers.")
Signed-off-by: Zhao Yan <yan.y.zhao@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
The spam of every context initialisation saying the same thing is annoying
me! Move the information to the setup of the engine.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170301121131.11588-1-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reintroduce a lock around tiling vs framebuffer creation to prevent
modification of the obj->tiling_and_stride whilst the framebuffer is
being created. Rather than use struct_mutex once again, use the
per-object lock - this will also be required in future to prevent
changing the tiling whilst submitting rendering.
Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Fixes: 24dbf51a55 ("drm/i915: struct_mutex is not required for allocating the framebuffer")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170301154128.2841-2-chris@chris-wilson.co.uk
No more direct return -EINVAL as we have to unwind the
obj->framebuffer_references.
Fixes: 24dbf51a55 ("drm/i915: struct_mutex is not required for allocating the framebuffer")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170301154128.2841-1-chris@chris-wilson.co.uk
If link training at a link rate optimal for a particular
mode fails during modeset's atomic commit phase, then we
let the modeset complete and then retry. We save the link rate
value at which link training failed, update the link status property
to "BAD" and use a lower link rate to prune the modes. It will redo
the modeset on the current mode at lower link rate or if the current
mode gets pruned due to lower link constraints then, it will send a
hotplug uevent for userspace to handle it.
This is also required to pass DP CTS tests 4.3.1.3, 4.3.1.4,
4.3.1.6.
v9:
* Use the trimmed max values of link rate/lane count based on
link train fallback (Daniel Vetter)
v8:
* Set link_status to BAD first and then call mode_valid (Jani Nikula)
v7:
Remove the redundant variable in previous patch itself
v6:
* Obtain link rate index from fallback_link_rate using
the helper intel_dp_link_rate_index (Jani Nikula)
* Include fallback within intel_dp_start_link_train (Jani Nikula)
v5:
* Move set link status to drm core (Daniel Vetter, Jani Nikula)
v4:
* Add fallback support for non DDI platforms too
* Set connector->link status inside set_link_status function
(Jani Nikula)
v3:
* Set link status property to BAd unconditionally (Jani Nikula)
* Dont use two separate variables link_train_failed and link_status
to indicate same thing (Jani Nikula)
v2:
* Squashed a few patches (Jani Nikula)
Acked-by: Tony Cheng <tony.cheng@amd.com>
Acked-by: Harry Wentland <Harry.wentland@amd.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/d796cc0c2814d668a47ef43c464f9a4089d46d64.1481883920.git.jani.nikula@intel.com
According to the spec we should call MIPI_SEQ_TEAR_ON and DISPLAY_ON
on enable for cmd-mode, just like we already call their counterparts
on disable. Note: untested, my panel is a vid-mode panel.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Bob Paauwe <bob.j.paauwe@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1488374106-4949-10-git-send-email-jani.nikula@intel.com
According to the spec for v2 VBTs we should call MIPI_SEQ_DISPLAY_OFF
before sending SHUTDOWN, where as for v3 VBTs we should send SHUTDOWN
first.
Since the v2 order has known issues, we use the v3 order everywhere,
add a comment documenting this.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Bob Paauwe <bob.j.paauwe@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1488374106-4949-8-git-send-email-jani.nikula@intel.com
Execute the MIPI_SEQ_BACKLIGHT_ON/OFF VBT sequences at the same time as
we call intel_panel_enable_backlight() / intel_panel_disable_backlight().
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Bob Paauwe <bob.j.paauwe@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1488374106-4949-7-git-send-email-jani.nikula@intel.com
Execute MIPI_SEQ_DEASSERT_RESET before putting the device in ready
state (LP-11), this is the sequence in which things should be done
according to the spec.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Bob Paauwe <bob.j.paauwe@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1488374106-4949-6-git-send-email-jani.nikula@intel.com
Move the DPOunit clock gate workaround to directly after the PLL enable.
The exact location of the workaround does not matter and there are 2
reasons to group it with the PLL enable:
1) This moves it out of the middle of the init sequence from the spec,
making it easier to follow the init sequence / compare it to the spec
2) It is grouped with the pll disable call in intel_dsi_post_disable,
so for consistency it should be grouped with the pll enable in
intel_dsi_pre_enable
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Bob Paauwe <bob.j.paauwe@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1488374106-4949-5-git-send-email-jani.nikula@intel.com
intel_dsi_post_disable(), which does the MIPI_SEQ_ASSERT_RESET,
will always be called at some point before intel_dsi_pre_enable()
making the MIPI_SEQ_ASSERT_RESET in intel_dsi_pre_enable() redundant.
In addition, calling MIPI_SEQ_ASSERT_RESET in the enable path goes
against the VBT spec.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Bob Paauwe <bob.j.paauwe@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1488374106-4949-3-git-send-email-jani.nikula@intel.com
Document the DSI panel enable / disable sequences from the spec,
for easy comparison between the code and the spec.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Bob Paauwe <bob.j.paauwe@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1488374106-4949-2-git-send-email-jani.nikula@intel.com
After
commit 2c7d0602c8
Author: Imre Deak <imre.deak@intel.com>
Date: Mon Dec 5 18:27:37 2016 +0200
drm/i915/gen9: Fix PCODE polling during CDCLK change notification
there is still one report of the CDCLK-change request timing out on a
KBL machine, see the Reference link. On that machine the maximum time
the request took to succeed was 34ms, so increase the timeout to 50ms.
v2:
- Change timeout from 100 to 50 ms to maintain the current 50 ms limit
for atomic waits in the driver. (Chris, Tvrtko)
Reference: https://bugs.freedesktop.org/show_bug.cgi?id=99345
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1487946730-17162-1-git-send-email-imre.deak@intel.com
v2: Addressed Jani's Review comments(renamed bit field macros)
v3: Jani's Review comment for aligning code to platforms and added
wrapper functions.
v4: Corrected enable/disable seuqence as per BSPEC
v5: Corrected waiting twice for same bit (Review comments: Jani)
v6: Rebased to Han's patches(dsi restructuring code)
Signed-off-by: Deepak M <m.deepak@intel.com>
Signed-off-by: Madhav Chauhan <madhav.chauhan@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1488352893-29916-2-git-send-email-madhav.chauhan@intel.com
drivers/gpu/drm/i915/intel_dsi.c: In function ‘intel_dsi_prepare’:
drivers/gpu/drm/i915/intel_dsi.c:1308:1: error: the frame size of 2488 bytes is larger than 2048 bytes [-Werror=frame-larger-than=]
which is caused by the compiling expanding every _MIPI_PORT into an
on-stack array of u32[3] at every callsite. Not sure why only one
machine/compiler appears susceptible, but with a minor tweak to _MIPI_PORT
we can defer the error until later.
This is a partial revert of commit ce64645d86 ("drm/i915: use variadic
macros and arrays to choose port/pipe based registers") for a particular
bad offender.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170228145519.18012-1-chris@chris-wilson.co.uk
Acked-by: Jani Nikula <jani.nikula@intel.com>
Use a more common logging style.
Miscellanea:
o Coalesce formats and realign arguments
o Neaten a few macros now using pr_<level>
Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Rob Clark <robdclark@gmail.com>
Acked-by: Sinclair Yeh <syeh@vmware.com>
Acked-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Acked-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/76355db47b31668bb64d996865ceee53bd66b11f.1488285953.git.joe@perches.com
Before get the page from pfn, use pfn_valid to check if pfn
is able to translate to page structure.
Signed-off-by: Chuanxiao Dong <chuanxiao.dong@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
update the correct virtual montior connection status to vreg
v2: address yulei's comment on commit message
Signed-off-by: Bing Niu <bing.niu@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
register 0x20e0 should be mode register
v2: rebased to latest code base
Signed-off-by: Zhao Yan <yan.y.zhao@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
those registers are render registers with F_CMD_ACCESS flag set
Signed-off-by: Zhao Yan <yan.y.zhao@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
those registers are render registers, should have F_CMD_ACCESS flag set
v4:
rebase to lastest code base
v3:
per zhenyu's comments, move newly added registers to a separate patch
v2:
per Kevin's comments, move newly added registers to the tails of lists.
Signed-off-by: Zhao Yan <yan.y.zhao@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
A couple of operations, the flushes and the tracepoint, do not require
serialisation by client->wq_lock, so move them before we take it.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170228112803.11646-3-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Following the use of dma_fence_signal() from within our interrupt
handler, we need to make guc->wq_lock also irq-safe. This was done
previously as part of the guc scheduler patch (which also started
mixing our fences with the interrupt handler), but is now required to
fix the current guc submission backend.
v4: Document that __i915_guc_submit is always under an irq disabled
section
v5: Move wq_rsvd adjustment to its own function
Fixes: 67b807a892 ("drm/i915: Delay disabling the user interrupt for breadcrumbs")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170228112803.11646-2-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
On some devices only MIPI PORT C is used, in this case checking the
MIPI PORT A CTRL AFE_LATCHOUT bit (there is no such bit for PORT C
on VLV/CHT) will result in false positive "DSI LP not going Low" errors
as this checks the PORT A clk status.
In case both ports are used we have already checked the AFE_LATCHOUT
bit when going through the for_each_dsi_port() loop for PORT A and
checking the same bit again for PORT C is a no-op.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97061
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Bob Paauwe <bob.j.paauwe@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/242e4438bf29ebffc66eaa182f22b9d60d304bc2.1488273823.git.jani.nikula@intel.com
The drm_panel_enable/disable and drm_panel_prepare/unprepare calls are
not fine grained enough to abstract all the different steps we need to
take (and VBT sequences we need to exec) properly. So simply remove the
panel _enable/disable and prepare/unprepare callbacks and instead
export intel_dsi_exec_vbt_sequence() from intel_dsi_panel_vbt.c
and call that from intel_dsi_enable/disable().
No functional changes.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Bob Paauwe <bob.j.paauwe@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/b4ca5185d4788d92df2ed60837a24b8962a8e8ba.1488273823.git.jani.nikula@intel.com
Move the intel_dsi_clear_device_ready() function to higher up in
intel_dsi.c this pairs it with intel_dsi_device_ready(); and pairs
intel_dsi_*enable* with intel_dsi_*disable without
intel_dsi_clear_device_ready() sitting in the middle of them.
This commit purely moves code around, it does not make any
changes what-so-ever.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Bob Paauwe <bob.j.paauwe@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/f971d18ea6d350890447860aeb541dba072a6e47.1488273823.git.jani.nikula@intel.com
The enable path has an intel_dsi_prepare() helper which prepares various
registers for the mode-set. Move the code undoing this to a new
intel_dsi_unprepare() helper function for better symmetry between the
enable and disable paths. No functional changes.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Bob Paauwe <bob.j.paauwe@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/cc0baaf04ea74a20031b4b5bb128591dcfa78406.1488273823.git.jani.nikula@intel.com
intel_dsi_disable/enable only have one caller, merge them into their
respective callers.
Change msleep(2) into usleep_range(2000, 5000) to make checkpatch happy,
otherwise no functional changes.
The main advantage of this change is that it makes it easier to
follow all the steps of the panel enable / disable sequence when
reading the code.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Bob Paauwe <bob.j.paauwe@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/d7249612e6d2e9639ecd1d8d106ca37d5794f2a4.1488273823.git.jani.nikula@intel.com
Instead of calling wait_for_dsi_fifo_empty on all dsi ports after calling
a drm_panel_foo helper which calls VBT sequences, move it to the VBT
mipi_exec_send_packet helper, which is the one VBT instruction which
actually puts data in the fifo.
This results in a nice cleanup making it clearer what all the steps on
intel_dsi_enable / disable are and this also makes the VBT code properly
wait till a command has actually been send before executing the next
steps (typically a delay) in the VBT sequence.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Bob Paauwe <bob.j.paauwe@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/289977b5699e252fea5c211d1d1645f9e79cca79.1488273823.git.jani.nikula@intel.com
Move the setting of gpu_error->missed_irq_ring bit to a common function
so that we can get the debug logging for either path.
v2: Add %pF caller
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170228085018.3225-1-chris@chris-wilson.co.uk
v2: Addressed Jani's Review comments(renamed bit field macros)
Txesc clock divider is calculated and programmed
for geminilake platform.
Signed-off-by: Deepak M <m.deepak@intel.com>
Signed-off-by: Madhav Chauhan <madhav.chauhan@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1487335415-14766-7-git-send-email-madhav.chauhan@intel.com
Register MIPI_CLOCK_CTRL is applicable only
for BXT platform. Future platform have other
registers to program the escape clock dividers.
Signed-off-by: Deepak M <m.deepak@intel.com>
Signed-off-by: Madhav Chauhan <madhav.chauhan@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1487335415-14766-6-git-send-email-madhav.chauhan@intel.com
PLL divider range for GLK is different than that of
BXT, hence adding the GLK range check in this patch.
v2: Code restructure using min and max ratio variables (Ander)
v3: Code changes to avoid "maybe-uninitialized" warning (Jani)
Signed-off-by: Deepak M <m.deepak@intel.com>
Signed-off-by: Madhav Chauhan <madhav.chauhan@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1487335415-14766-5-git-send-email-madhav.chauhan@intel.com
Program the clk lane and tlpx time count registers
to configure DSI PHY.
v2: Addressed Jani's Review comments(renamed bit field macros)
v3: Program clk lane timing reg same as dphy param reg.
v4: Removed "line over 80 character" warning
Signed-off-by: Deepak M <m.deepak@intel.com>
Signed-off-by: Madhav Chauhan <madhav.chauhan@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1487335415-14766-3-git-send-email-madhav.chauhan@intel.com
For GEMINILAKE, dphy param reg values are programmed in terms
of HS byte clock count while for older platforms in terms of
HS ddr clk count.
v2: Added comments to clarify ddr clock count calculation
v3: Use multiplier variable instead of IS_GEMINILAKE()
check everywhere (Jani)
Signed-off-by: Deepak M <m.deepak@intel.com>
Signed-off-by: Madhav Chauhan <madhav.chauhan@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1487335415-14766-2-git-send-email-madhav.chauhan@intel.com
We already have the helper, we can convert the rest of the kernel
mechanically using:
git grep -l 'atomic_inc_not_zero.*mm_users' | xargs sed -i 's/atomic_inc_not_zero(&\(.*\)->mm_users)/mmget_not_zero\(\1\)/'
This is needed for a later patch that hooks into the helper, but might
be a worthwhile cleanup on its own.
Link: http://lkml.kernel.org/r/20161218123229.22952-3-vegard.nossum@oracle.com
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Apart from adding the helper function itself, the rest of the kernel is
converted mechanically using:
git grep -l 'atomic_inc.*mm_count' | xargs sed -i 's/atomic_inc(&\(.*\)->mm_count);/mmgrab\(\1\);/'
git grep -l 'atomic_inc.*mm_count' | xargs sed -i 's/atomic_inc(&\(.*\)\.mm_count);/mmgrab\(\&\1\);/'
This is needed for a later patch that hooks into the helper, but might
be a worthwhile cleanup on its own.
(Michal Hocko provided most of the kerneldoc comment.)
Link: http://lkml.kernel.org/r/20161218123229.22952-1-vegard.nossum@oracle.com
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix typos and add the following to the scripts/spelling.txt:
aligment||alignment
I did not touch the "N_BYTE_ALIGMENT" macro in
drivers/net/wireless/realtek/rtlwifi/wifi.h to avoid unpredictable
impact.
I fixed "_aligment_handler" in arch/openrisc/kernel/entry.S because
it is surrounded by #if 0 ... #endif. It is surely safe and I
confirmed "_alignment_handler" is correct.
I also fixed the "controler" I found in the same hunk in
arch/openrisc/kernel/head.S.
Link: http://lkml.kernel.org/r/1481573103-11329-8-git-send-email-yamada.masahiro@socionext.com
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
A significant cost in setting up a wait is the overhead of enabling the
interrupt. As we disable the interrupt whenever the queue of waiters is
empty, if we are frequently waiting on alternating batches, we end up
re-enabling the interrupt on a frequent basis. We do want to disable the
interrupt during normal operations as under high load it may add several
thousand interrupts/s - we have been known in the past to occupy whole
cores with our interrupt handler after accidentally leaving user
interrupts enabled. As a compromise, leave the interrupt enabled until
the next IRQ, or the system is idle. This gives a small window for a
waiter to keep the interrupt active and not be delayed by having to
re-enable the interrupt.
v2: Restore hangcheck/missed-irq detection for continuations
v3: Be more careful restoring the hangcheck timer after reset
v4: Be more careful restoring the fake irq after reset (if required!)
v5: Redo changes to intel_engine_wakeup()
v6: Factor out __intel_engine_wakeup()
v7: Improve commentary for declaring a missed wakeup
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170227205850.2828-4-chris@chris-wilson.co.uk
By deferring hangcheck to the fake breadcrumb interrupt, we can simply
the enabling procedure slightly - as by enabling the fake, we then
enable the hangcheck. By always enabling the hangcheck from each fake
interrupt (it will be a no-op for an already queued hangcheck), it will
make restoring the breadcrumbs after a reset simpler in the next patch.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170227205850.2828-3-chris@chris-wilson.co.uk
As execlists and other non-semaphore multi-engine devices coordinate
between engines using interrupts, we can shave off a few 10s of
microsecond of scheduling latency by doing the fence signaling from the
interrupt as opposed to a RT kthread. (Realistically the delay adds
about 1% to an individual cross-engine workload.) We only signal the
first fence in order to limit the amount of work we move into the
interrupt handler. We also have to remember that our breadcrumbs may be
unordered with respect to the interrupt and so we still require the
waiter process to perform some heavyweight coherency fixups, as well as
traversing the tree of waiters.
v2: No need for early exit in irq handler - it breaks the flow between
patches and prevents the tracepoint
v3: Restore rcu hold across irq signaling of request
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170227205850.2828-2-chris@chris-wilson.co.uk
The two users of the return value from intel_engine_wakeup() are
expecting different results. In the breadcrumbs hangcheck, we are using
it to determine whether wake_up_process() detected the waiter was
currently running (and if so we presume that it hasn't yet missed the
interrupt). However, in the fake_irq path, we are using the return value
as a check as to whether there are any waiters, and so we may
incorrectly stop the fake-irq if that waiter was currently running.
To handle the two different needs, return both bits of information! We
uninline it from the irq path in preparation for the next patch which
makes the irq hotpath special and relegates intel_engine_wakeup() to the
slow fixup paths.
v2: s/ret/result/
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170227205850.2828-1-chris@chris-wilson.co.uk
After initiating a sideband transaction, we only want to wait for the
transaction to become idle. If, as we are, we wait for both the busy
and error flag to clear, if an error is raised we just spin until the
timeout. Once the hw is idle, we can then check to see if the hw flagged
an error, and report it distinctly.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170223141020.13250-1-chris@chris-wilson.co.uk
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
No hardware was ever shipped that needed more than 4096 byte alignment
and future hardware will not use this legacy path. So reduce the
alignment to make it easier and quicker to launch workloads.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170227135913.8056-3-chris@chris-wilson.co.uk
We are required to reload the TLBs around ppgtt switches. However, we
already do an unconditional TLB invalidate before every batch and a flush
afterwards, so this condition is already satisfied without extra flushes
around the LRI instructions.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170227135913.8056-2-chris@chris-wilson.co.uk
We are required to reload the TLBs around context switches
(MI_SET_CONTEXT specifically) and the recommendation is do that before
the MI_SET_CONTEXT so that it is serialised with the switch and not
forgotten:
[DevSNB] If Flush TLB invalidation Mode is enabled it’s the driver’s
responsibility to invalidate the TLBs at least once after the previous
context switch after any GTT mappings changed (including new GTT entries).
This can be done by a pipeline PIPE_CONTROL with TLB inv bit set
immediately before MI_SET_CONTEXT.
However, we already do an unconditional TLB invalidate before every
batch so this condition is satifisfied.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170227135913.8056-1-chris@chris-wilson.co.uk
Certain Baytrails, namely the 4 cpu core variants, have been
plaqued by spurious system hangs, mostly occurring with light loads.
Multiple bisects by various people point to a commit which changes the
reclocking strategy for Baytrail to follow its bigger brethen:
commit 8fb55197e6 ("drm/i915: Agressive downclocking on Baytrail")
There is also a review comment attached to this commit from Deepak S
on avoiding punit access on Cherryview and thus it was excluded on
common reclocking path. By taking the same approach and omitting
the punit access by not tweaking the thresholds when the hardware
has been asked to move into different frequency, considerable gains
in stability have been observed.
With J1900 box, light render/video load would end up in system hang
in usually less than 12 hours. With this patch applied, the cumulative
uptime has now been 34 days without issues. To provoke system hang,
light loads on both render and bsd engines in parallel have been used:
glxgears >/dev/null 2>/dev/null &
mpv --vo=vaapi --hwdec=vaapi --loop=inf vid.mp4
So far, author has not witnessed system hang with above load
and this patch applied. Reports from the tenacious people at
kernel bugzilla are also promising.
Considering that the punit access frequency with this patch is
considerably less, there is a possibility that this will push
the, still unknown, root cause past the triggering point on most loads.
But as we now can reliably reproduce the hang independently,
we can reduce the pain that users are having and use a
static thresholds until a root cause is found.
v3: don't break debugfs and simplification (Chris Wilson)
References: https://bugzilla.kernel.org/show_bug.cgi?id=109051
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: fritsch@xbmc.org
Cc: miku@iki.fi
Cc: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
CC: Michal Feix <michal@feix.cz>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Deepak S <deepak.s@linux.intel.com>
Cc: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Cc: <stable@vger.kernel.org> # v4.2+
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1487166779-26945-1-git-send-email-mika.kuoppala@intel.com
As we track whether a vma has been inserted into the drm_mm using the
vma->flags, if we fail to bind the vma into the GTT we do not update
those bits and will attempt to reinsert the vma into the drm_mm on
future passes. To prevent that, we want to unwind i915_vma_insert() if
we fail in our attempt to bind.
Fixes: 59bfa1248e ("drm/i915: Start passing around i915_vma from execbuffer")
Testcase: igt/drv_selftest/live_gtt
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.william.auld@gmail.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: <stable@vger.kernel.org> # v4.9+
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170227122654.27651-3-chris@chris-wilson.co.uk
If we fail to allocate the ppgtt range after allocating the pages for
the vma, we should unwind the local allocation before reporting back the
failure.
Fixes: ff685975d9 ("drm/i915: Move allocate_va_range to GTT")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170227122654.27651-2-chris@chris-wilson.co.uk
Only if we allocated the layer and the lower level failed should we
remove this layer when unwinding. Otherwise we ignore the overlapping
entries by overwriting the old layer with scratch.
Fixes: c5d092a429 ("drm/i915: Remove bitmap tracking for used-pml4")
Fixes: e2b763caa6 ("drm/i915: Remove bitmap tracking for used-pdpes")
Reported-by: Matthew Auld <matthew.william.auld@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99947
Testcase: igt/drv_selftest/live_gtt
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.william.auld@gmail.com>
Tested-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170227122654.27651-1-chris@chris-wilson.co.uk
The replay bit of the ring mode register is not a valid bit for Gen8+.
Do not write to this bit.
Signed-off-by: Kelvin Gardiner <kelvin.gardiner@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Ceraolo Spurio, Daniele <daniele.ceraolospurio@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
[Joonas: Fixed commit message line to be under 72 chars]
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1487963724-4824-1-git-send-email-kelvin.gardiner@intel.com
Backmerge the main pull request to sync up with all the newly landed
drivers. Otherwise we'll have chaos even before 4.12 started in
earnest.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
According to bspec, the DDI IO power domains should be enabled after
enabling the DPLL and mapping it to the DDI. The current order doesn't
seem to create problems with Skylake and Kabylake, but causes enable
timeouts in Geminilake.
v2: Rebase.
- Take power domain references before sanitizing encoders. (Imre)
- Add comment to get_encoder_power_domains() defition. (Ander)
v3: Don't put the domain if called with HSW/BDW's analog encoder. (CI)
v4: Put IO power domain before unmapping DPLL. (Imre)
- Change return type of intel_ddi_get_power_domains() to u64. (Imre)
Cc: David Weinehall <david.weinehall@linux.intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: David Weinehall <david.weinehall@linux.intel.com> # v1
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170224141959.5955-1-ander.conselvan.de.oliveira@intel.com
In Geminilake, the DDI IO power domains can't be enabled before a DPLL
is running and mapped to the appropriate DDI. At least on Geminilake,
attempting to enable those during init will lead to a timeout.
The failure to enable the power domain also causes issues with the state
verifier during resume from suspend. After all the init power domains
are enabled, the call to intel_power_domains_sync_hw() from the resume
path will cause the hw_enabled field on the respective power wells to be
false while the usage count remains above zero. Further attempts to
enable the power domain caused by a modeset will simply update the usage
count without doing anything else. When the state verifier attempts to
read the state of a DDI encoder, intel_display_power_get_if_enabled()
returns false, leading to the following WARN:
WARNING: CPU: 3 PID: 1743 at drivers/gpu/drm/i915/intel_display.c:7001 verify_connector_state.isra.80+0x26c/0x2b0 [i915]
attached crtc is active, but connector isn't
Modules linked in: i915(E) tun ip6t_rpfilter ip6t_REJECT nf_reject_ipv6 xt_conntrack ebtable_broute bridge stp llc ebtable_nat ip6table_mangle ip6table_security ip6table_nat nf_conntrack_ipv6 nf_defrag_ipv6 nf_nat_ipv6 ip6table_raw iptable_mangle iptable_security iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack iptable_raw ebtable_filter ebtables ip6table_filter ip6_tables x86_pkg_temp_thermal coretemp kvm_intel kvm i2c_algo_bit drm_kms_helper irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel drm shpchp tpm_tis tpm_tis_core tpm nfsd auth_rpcgss nfs_acl lockd grace sunrpc crc32c_intel serio_raw [last unloaded: i915]
CPU: 3 PID: 1743 Comm: kworker/u8:22 Tainted: G W E 4.10.0-rc3ander+ #300
Hardware name: Intel Corp. Geminilake/GLK RVP1 DDR4 (05), BIOS GELKRVPA.X64.0023.B40.1611302145 11/30/2016
Workqueue: events_unbound async_run_entry_fn
Call Trace:
dump_stack+0x86/0xc3
__warn+0xcb/0xf0
warn_slowpath_fmt+0x5f/0x80
verify_connector_state.isra.80+0x26c/0x2b0 [i915]
intel_atomic_commit_tail+0x520/0x1000 [i915]
? remove_wait_queue+0x70/0x70
intel_atomic_commit+0x3f8/0x520 [i915]
? intel_runtime_pm_put+0x6e/0xa0 [i915]
drm_atomic_commit+0x4b/0x50 [drm]
__intel_display_resume+0x72/0xc0 [i915]
intel_display_resume+0x107/0x150 [i915]
i915_drm_resume+0xe0/0x180 [i915]
i915_pm_restore+0x1e/0x30 [i915]
i915_pm_resume+0xe/0x10 [i915]
pci_pm_resume+0x64/0xa0
dpm_run_callback+0xa1/0x2a0
? pci_pm_thaw+0x90/0x90
device_resume+0xe3/0x200
async_resume+0x1d/0x50
async_run_entry_fn+0x39/0x170
process_one_work+0x212/0x670
? process_one_work+0x197/0x670
worker_thread+0x4e/0x490
kthread+0x101/0x140
? process_one_work+0x670/0x670
? kthread_create_on_node+0x60/0x60
ret_from_fork+0x2a/0x40
Cc: David Weinehall <david.weinehall@linux.intel.com>
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: David Weinehall <david.weinehall@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170222063431.10060-6-ander.conselvan.de.oliveira@intel.com
Don't allow conversion from arbitraty encoder types to a digital port.
Calling enc_to_dig_port() with the wrong encoder may seem far fetched,
but certain paths of the ddi code may be called with hasell's analog
encoder and the conversion is wrong for DP mst encoders too, so safe
guard against it.
v2: Warn if encoder type is unknown and device is not DDI. (Imre)
v3: Remove stray hunk from rebase error. (Ander)
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170224141845.5836-1-ander.conselvan.de.oliveira@intel.com
Backmerge the main pull request to sync up with all the newly landed
drivers. Otherwise we'll have chaos even before 4.12 started in
earnest.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
When advancing onto the next 4th level page table entry, we need to
reset our indices to 0. Currently we restart from the original address
which means we start with an offset into the next PML table.
Fixes: 894ccebee2 ("drm/i915: Micro-optimise gen8_ppgtt_insert_entries()")
Reported-by: Matthew Auld <matthew.william.auld@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99948
Testcase: igt/drv_selftest/live_gtt
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.william.auld@gmail.com>
Tested-by: Matthew Auld <matthew.william.auld@gmail.com>
Reviewed-by: Matthew Auld <matthew.william.auld@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170225181122.4788-4-chris@chris-wilson.co.uk
We rely on the VMA being allocated inside the drm_mm and for its allotted
node being large enough to accommodate all the vma->pages.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.william.auld@gmail.com>
Reviewed-by: Matthew Auld <matthew.william.auld@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170225181122.4788-3-chris@chris-wilson.co.uk
->fault(), ->page_mkwrite(), and ->pfn_mkwrite() calls do not need to
take a vma and vmf parameter when the vma already resides in vmf.
Remove the vma parameter to simplify things.
[arnd@arndb.de: fix ARM build]
Link: http://lkml.kernel.org/r/20170125223558.1451224-1-arnd@arndb.de
Link: http://lkml.kernel.org/r/148521301778.19116.10840599906674778980.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Darrick J. Wong <darrick.wong@oracle.com>
Cc: Matthew Wilcox <mawilcox@microsoft.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Jan Kara <jack@suse.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch makes the I915_PARAM_HAS_EXEC_CONSTANTS getparam return 0
(indicating the optional feature is not supported), and makes execbuf
always return -EINVAL if the flags are used.
Apparently, no userspace ever shipped which used this optional feature:
I checked the git history of Mesa, xf86-video-intel, libva, and Beignet,
and there were zero commits showing a use of these flags. Kernel commit
72bfa19c8d apparently introduced the feature prematurely. According
to Chris, the intention was to use this in cairo-drm, but "the use was
broken for gen6", so I don't think it ever happened.
'relative_constants_mode' has always been tracked per-device, but this
has actually been wrong ever since hardware contexts were introduced, as
the INSTPM register is saved (and automatically restored) as part of the
render ring context. The software per-device value could therefore get
out of sync with the hardware per-context value. This meant that using
them is actually unsafe: a client which tried to use them could damage
the state of other clients, causing the GPU to interpret their BO
offsets as absolute pointers, leading to bogus memory reads.
These flags were also never ported to execlist mode, making them no-ops
on Gen9+ (which requires execlists), and Gen8 in the default mode.
On Gen8+, userspace can write these registers directly, achieving the
same effect. On Gen6-7.5, it likely makes sense to extend the command
parser to support them. I don't think anyone wants this on Gen4-5.
Based on a patch by Dave Gordon.
v3: Return -ENODEV for the getparam, as this is what we do for other
obsolete features. Suggested by Chris Wilson.
Cc: stable@vger.kernel.org
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=92448
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170215093446.21291-1-kenneth@whitecape.org
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
At least a ParadTech PS175 LSPCON chip/firmware uses long instead of
short pulses to signal output unplug/plug events. This is contrary to
how branch devices normally work which use short HPD signaling. This
chip will also switch to LS mode after an unplug event, which could be
the consequence of the long HPD signaling semantics and an effort to
save power automatically. Because of this we'll fail to do AUX and
detect the output after a replug event.
To fix this make sure we are in PCON mode during connector detection.
v2:
- Switch the mode in the proper spot.
Cc: raptorteak@gmail.com
Cc: Shashank Sharma <shashank.sharma@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98912
Reported-and-tested-by: raptorteak@gmail.com
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1487776252-6288-1-git-send-email-imre.deak@intel.com
Rather than sprinkling ideas of how big the DDI buf translation tables
are somewhere in intel_dp.c, let's concentrate it all in intel_ddi.c
where the actual tables are defined. To that end we introduce
intel_ddi_dp_voltage_max() which will actually look at the proper
translation table to determine what is the maximum voltage swing level
supported.
v2: Mask out the preemphasis bits from the return value of
intel_ddi_dp_voltage_max()
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: David Weinehall <david.weinehall@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170223174901.26749-1-ville.syrjala@linux.intel.com
Convert the big switch statement in translate_signal_level() into a neat
table. The table also serves as documentation for the translation
tables. We'll also have other uses for this table later on.
v2: Remove superfluous space (David)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170223173507.17600-2-ville.syrjala@linux.intel.com
Reviewed-by: David Weinehall <david.weinehall@linux.intel.com>
Split the code to select the correct translation table into DP,
eDP and FDI specific helpers. This reduces the clutter in
intel_prepare_dp_ddi_buffers(), and we'll have other uses for some
of these new helper functions later on.
v2: Fix typo in commit message (David)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170223173507.17600-1-ville.syrjala@linux.intel.com
Reviewed-by: David Weinehall <david.weinehall@linux.intel.com>
If we cease making progress in finding matching outputs for a tiled
configuration, stop looping over the remaining unconfigured outputs.
v2: Use conn_seq (instead of pass) to only apply tile configuration on
first pass.
Fixes: b0ee9e7fa5 ("drm/fb: add support for tiled monitor configurations. (v2)")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tomasz Lis <tomasz.lis@intel.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: <stable@vger.kernel.org> # v3.19+
Reviewed-by: Tomasz Lis <tomasz.lis@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170224114306.4400-1-chris@chris-wilson.co.uk
Guest is now acces some MMIOs (0x215c, RING_INSTPM) through command which
is not originally in gvt's white list. This cause huge error log printed in
gvt.
This patch addes these MMIOs to the white list.
V2. change the commit message content.
V3. remove duplicate defination of 0x20c0.
V4. refine code style.
Signed-off-by: Pei Zhang <pei.zhang@intel.com>
Signed-off-by: Weinan Li <weinan.z.li@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Add pcode mailbox write emulation in gvt for BDW, reuse emulation code of
Skylake.
V2: refine comments, remove duplication defination of 0x138124, add
IS_SKYLAKE() check for Skylake only pcode commands.
Signed-off-by: Weinan Li <weinan.z.li@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
This assigns resolution definition for each vGPU type. For smaller
resource type we should limit max resolution, so e.g limit to 1024x768
for 64M type, others are still default to 1920x1200.
v2: Fix for actual 1920x1200 resolution
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
We'll need to apply different resolution for vgpu types, so this
adds more EDID types definition.
v2: fix typo for actual 1920x1200 resolution
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
-----BEGIN PGP SIGNATURE-----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=Yjfg
-----END PGP SIGNATURE-----
Merge tag 'drm-for-v4.11-less-shouty' of git://people.freedesktop.org/~airlied/linux
Pull drm updates from Dave Airlie:
"This is the main drm pull request for v4.11.
Nothing too major, the tinydrm and mmu-less support should make
writing smaller drivers easier for some of the simpler platforms, and
there are a bunch of documentation updates.
Intel grew displayport MST audio support which is hopefully useful to
people, and FBC is on by default for GEN9+ (so people know where to
look for regressions). AMDGPU has a lot of fixes that would like new
firmware files installed for some GPUs.
Other than that it's pretty scattered all over.
I may have a follow up pull request as I know BenH has a bunch of AST
rework and fixes and I'd like to get those in once they've been tested
by AST, and I've got at least one pull request I'm just trying to get
the author to fix up.
Core:
- drm_mm reworked
- Connector list locking and iterators
- Documentation updates
- Format handling rework
- MMU-less support for fbdev helpers
- drm_crtc_from_index helper
- Core CRC API
- Remove drm_framebuffer_unregister_private
- Debugfs cleanup
- EDID/Infoframe fixes
- Release callback
- Tinydrm support (smaller drivers for simple hw)
panel:
- Add support for some new simple panels
i915:
- FBC by default for gen9+
- Shared dpll cleanups and docs
- GEN8 powerdomain cleanup
- DMC support on GLK
- DP MST audio support
- HuC loading support
- GVT init ordering fixes
- GVT IOMMU workaround fix
amdgpu/radeon:
- Power/clockgating improvements
- Preliminary SR-IOV support
- TTM buffer priority and eviction fixes
- SI DPM quirks removed due to firmware fixes
- Powerplay improvements
- VCE/UVD powergating fixes
- Cleanup SI GFX code to match CI/VI
- Support for > 2 displays on 3/5 crtc asics
- SI headless fixes
nouveau:
- Rework securre boot code in prep for GP10x secure boot
- Channel recovery improvements
- Initial power budget code
- MMU rework preperation
vmwgfx:
- Bunch of fixes and cleanups
exynos:
- Runtime PM support for MIC driver
- Cleanups to use atomic helpers
- UHD Support for TM2/TM2E boards
- Trigger mode fix for Rinato board
etnaviv:
- Shader performance fix
- Command stream validator fixes
- Command buffer suballocator
rockchip:
- CDN DisplayPort support
- IOMMU support for arm64 platform
imx-drm:
- Fix i.MX5 TV encoder probing
- Remove lower fb size limits
msm:
- Support for HW cursor on MDP5 devices
- DSI encoder cleanup
- GPU DT bindings cleanup
sti:
- stih410 cleanups
- Create fbdev at binding
- HQVDP fixes
- Remove stih416 chip functionality
- DVI/HDMI mode selection fixes
- FPS statistic reporting
omapdrm:
- IRQ code cleanup
dwi-hdmi bridge:
- Cleanups and fixes
adv-bridge:
- Updates for nexus
sii8520 bridge:
- Add interlace mode support
- Rework HDMI and lots of fixes
qxl:
- probing/teardown cleanups
ZTE drm:
- HDMI audio via SPDIF interface
- Video Layer overlay plane support
- Add TV encoder output device
atmel-hlcdc:
- Rework fbdev creation logic
tegra:
- OF node fix
fsl-dcu:
- Minor fixes
mali-dp:
- Assorted fixes
sunxi:
- Minor fix"
[ This was the "fixed" pull, that still had build warnings due to people
not even having build tested the result. I'm not a happy camper
I've fixed the things I noticed up in this merge. - Linus ]
* tag 'drm-for-v4.11-less-shouty' of git://people.freedesktop.org/~airlied/linux: (1177 commits)
lib/Kconfig: make PRIME_NUMBERS not user selectable
drm/tinydrm: helpers: Properly fix backlight dependency
drm/tinydrm: mipi-dbi: Fix field width specifier warning
drm/tinydrm: mipi-dbi: Silence: ‘cmd’ may be used uninitialized
drm/sti: fix build warnings in sti_drv.c and sti_vtg.c files
drm/amd/powerplay: fix PSI feature on Polars12
drm/amdgpu: refuse to reserve io mem for split VRAM buffers
drm/ttm: fix use-after-free races in vm fault handling
drm/tinydrm: Add support for Multi-Inno MI0283QT display
dt-bindings: Add Multi-Inno MI0283QT binding
dt-bindings: display/panel: Add common rotation property
of: Add vendor prefix for Multi-Inno
drm/tinydrm: Add MIPI DBI support
drm/tinydrm: Add helper functions
drm: Add DRM support for tiny LCD displays
drm/amd/amdgpu: post card if there is real hw resetting performed
drm/nouveau/tmr: provide backtrace when a timeout is hit
drm/nouveau/pci/g92: Fix rearm
drm/nouveau/drm/therm/fan: add a fallback if no fan control is specified in the vbios
drm/nouveau/hwmon: expose power_max and power_crit
..
If the reserved region of memory has not been setup (most probably
because it has been limited by hardware or virtualisation), don't tell
the user to try and increase the amount of memory reserved for graphics.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170223122037.16174-1-chris@chris-wilson.co.uk
eviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
here is the update of sound bits for 4.11: again at this time, no big
changes in ALSA and ASoC core but only cosmetic changes like
consitifaction. Meanwhile, quite a lot of developments are seen in
a few driver side.
ALSA Core:
- Clean up, consitification of some ops
HD-audio:
- A slight behavior change of single_cmd option
- Quirks for AmigaOne X1000, Samsung Ativ Book 8, Dell AiO, ALC221 HP,
and fixes for Lewisburg controller
- Realtek ALC299, ALC1220 codecs
Others:
- USB-audio: Tascam US-16x08 DSP mixer quirk
- Intel HDMI LPE audio support for Baytrail / Cherrytrail; this
contains some updates in drm/i915 for the new platform binding
ASoC:
- Lots of updates in Intel drivers, mostly for DisplayPort and HDMI
on Skylake and onwards, as well as more Baytrail / Cherrytrail
boards support
- Channel mapping support for HDMI
- Support for AllWinner A31 and A33, Everest Semiconductor ES8328,
Nuvoton NAU8540.
-----BEGIN PGP SIGNATURE-----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=1cdN
-----END PGP SIGNATURE-----
Merge tag 'sound-4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"Here is the update of sound bits for 4.11: again at this time, no big
changes in ALSA and ASoC core but only cosmetic changes like
consitifaction.
Meanwhile, quite a lot of developments are seen in a few driver side.
ALSA Core:
- Clean up, consitification of some ops
HD-audio:
- A slight behavior change of single_cmd option
- Quirks for AmigaOne X1000, Samsung Ativ Book 8, Dell AiO, ALC221
HP, and fixes for Lewisburg controller
- Realtek ALC299, ALC1220 codecs
Others:
- USB-audio: Tascam US-16x08 DSP mixer quirk
- Intel HDMI LPE audio support for Baytrail / Cherrytrail; this
contains some updates in drm/i915 for the new platform binding
ASoC:
- Lots of updates in Intel drivers, mostly for DisplayPort and HDMI
on Skylake and onwards, as well as more Baytrail / Cherrytrail
boards support
- Channel mapping support for HDMI
- Support for AllWinner A31 and A33, Everest Semiconductor ES8328,
Nuvoton NAU8540.
* tag 'sound-4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (323 commits)
ALSA: usb-audio: Tidy up mixer_us16x08.c
ALSA: usb-audio: Fix memory leak and corruption in mixer_us16x08.c
ALSA: usb-audio: purge needless variable length array
ALSA: x86: hdmi: select CONFIG_SND_PCM
ALSA: x86: Don't enable runtime PM as default
ALSA: x86: Use runtime PM autosuspend
ALSA: usb-audio: localize function without external linkage
ALSA: usb-audio: localize one-referrer variable
ALSA: usb-audio: Tascam US-16x08 DSP mixer quirk
ALSA: emu10k1: constify snd_emux_operators structure
ASoC: sun4i-spdif: drop unnessary snd_soc_unregister_component()
ASoC: Intel: bxt: Add jack port initialize in bxt_rt298 machine
ASoC: nau8825: automatic BCLK and LRC divde in master mode
ASoC: hdac_hdmi: Add device id for Geminilake
ASoC: Intel: Skylake: Add Geminlake IDs
ASoC: rt298: Add DMI match for Geminilake reference platform
ASoC: Intel: Skylake: Check device type to get endpoint configuration
ASoC: Intel: bxt: Add jack port initialize in da7219_max98357a machine
ASoC: Intel: Skylake: Add jack port initialize in nau88l25_ssm4567 machine
ASoC: Intel: Skylake: Add jack port initialize in nau88l25_max98357a machine
...
As we handoff the GPU reset to the waiter, we need to check we don't
miss a wakeup if it has already been sent prior to us starting the wait.
v2: Tweak checking for reset to be clear to the need before sleeping
after changing the task state.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170223074422.4125-16-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
If we change the wait_queue_t from using the autoremove_wake_function to
the default_wake_function, we no longer have to restore the wait_queue_t
entry on the wait_queue_head_t list after being woken up by it, as we
are unusual in sleeping multiple times on the same wait_queue_t.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170223074422.4125-14-chris@chris-wilson.co.uk
After the request is cancelled, we then need to remove it from the
global execution timeline and return it to the context timeline, the
inverse of submit_request().
v2: Move manipulation of struct intel_wait to helpers
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170223074422.4125-12-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
The plan in the near-future is to allow requests to be removed from the
signaler. We can no longer then rely on holding a reference to the
request for the duration it is in the signaling tree, and instead must
obtain a reference to the request for the current operation using RCU.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170223074422.4125-10-chris@chris-wilson.co.uk
A request is assigned a global seqno only when it is on the hardware
execution queue. The global seqno can be used to maintain a list of
requests on the same engine in retirement order, for example for
constructing a priority queue for waiting. Prior to its execution, or
if it is subsequently removed in the event of preemption, its global
seqno is zero. As both insertion and removal from the execution queue
may operate in IRQ context, it is not guarded by the usual struct_mutex
BKL. Instead those relying on the global seqno must be prepared for its
value to change between reads. Only when the request is complete can
the global seqno be stable (due to the memory barriers on submitting
the commands to the hardware to write the breadcrumb, if the HWS shows
that it has passed the global seqno and the global seqno is unchanged
after the read, it is indeed complete).
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170223074422.4125-9-chris@chris-wilson.co.uk
On reflection, we are only using the execute fence as a waitqueue on the
global_seqno and not using it for dependency tracking between fences
(unlike the submit and dma fences). By only treating it as a waitqueue,
we can then treat it similar to the other waitqueues during submit,
making the code simpler.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170223074422.4125-8-chris@chris-wilson.co.uk
It had only one callsite and existed to keep the code clearer. Now
having shared the wait-on-error between phases and with plans to change
the wait-for-execute in the next few patches, remove the out of line
wait loop and move it into the main body of i915_wait_request.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170223074422.4125-7-chris@chris-wilson.co.uk
Add ourselves to the gpu error waitqueue earlier on, even before we
determine we have to wait on the seqno. This is so that we can then
share the waitqueue between stages in subsequent patches.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170223074422.4125-6-chris@chris-wilson.co.uk
Replace the global device seqno with one for each engine, and account
for in-flight seqno on each separately. This is consistent with
dma-fence as each timeline has separate fence-contexts for each engine
and a seqno is only ordered within a fence-context (i.e. seqno do not
need to be ordered wrt to other engines, just ordered within a single
engine). This is required to enable request rewinding for preemption on
individual engines (we have to rewind the global seqno to avoid
overflow, and we do not have to rewind all engines just to preempt one.)
v2: Rename active_seqno to inflight_seqnos to more clearly indicate that
it is a counter and not equivalent to the existing seqno. Update
functions that operated on active_seqno similarly.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170223074422.4125-3-chris@chris-wilson.co.uk
When dma_fence_signal() is called, it sets a flag to indicate the fence
is complete. Before the dma_fence is signaled, the seqno check will
first be passed. During an unlocked check (such as inside a waiter), it
is possible for the fence to be signaled even though the seqno has been
reset (by engine wraparound). In this case the waiter will be kicked,
but for an extra layer of protection we can check the persistent
signaled bit from the fence.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170223074422.4125-2-chris@chris-wilson.co.uk
This reverts commit 7ee686034b "drm/i915/dp: Ratelimit DP aux timeout
messages" as although it successfully squelches the debug messages, when
it does so it generates a warning instead. CI lights up orange with all
the warnings!
In its current incarnation DRM_DEBUG_RATELIMITED is not usable for us,
and we need to first teach lib/ratelimit.c not to warn when used for
debug messages.
Fixes: 7ee686034b ("drm/i915/dp: Ratelimit DP aux timeout messages")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Lyude <lyude@redhat.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: intel-gfx@lists.freedesktop.org
Link: http://patchwork.freedesktop.org/patch/msgid/20170223115102.7059-1-chris@chris-wilson.co.uk
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Geminilake scalers can do 7x7 filtering for all supported input sizes,
so it doesn't need the "high quality" mode programming, which was
actually removed from that platform.
v2: Split dev_priv parameter change out. (Ville)
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>,
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170223071600.14356-5-ander.conselvan.de.oliveira@intel.com
Geminilake has a third sprite plane (or fourth universal plane) that is
independent from the cursor. Make sure that for_each_plane_id_on_crtc()
is aware of that extra plane so that the watermark code takes it into
account.
Fixes: e9c9882556 ("drm/i915/glk: Configure number of sprite planes properly")
Cc: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: intel-gfx@lists.freedesktop.org
Cc: <drm-intel-fixes@lists.freedesktop.org>
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170223071600.14356-2-ander.conselvan.de.oliveira@intel.com
Previous vGPU type create tried to determine vGPU type name e.g _1, _2
based on the number of mdev devices can be created, but different type
might have very different resource size depending on physical device.
We need to split type name vs. actual mdev resource and create fixed
vGPU type with determined size for consistence.
With this we'd like to fix vGPU types for _1, _2, _4 and _8 now, each
type has fixed defined resource size. Available mdev instances that could
be created is determined by physical resource, and user should query
for that before creating.
Cc: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
The guest VM may initialize the whole GTT table during boot up,
so the warning msg in emulate_gtt_mmio_write is not necessary, it is
the expected behavior and it may confuse the user if error msg is
printed out, so remove the msg from emulate_gtt_mmio_write(),
Signed-off-by: Zhao, Xinda <xinda.zhao@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
In GVT-g we always emulate as pcode read/write success and ready for access
anytime, since we don't touch real physical registers here.
Add 'SKL_PCODE_CDCLK_CONTROL' write emulation, without it will cause
skl_set_cdclk fail in guest.
Signed-off-by: Weinan Li <weinan.z.li@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Releasing shadow PPGTT pages is not enough when vGPU reset, the
guest page table tracking data should has same life-cycle with
all the shadow PPGTT pages; Otherwise there is no chance to
re-shadow the PPGTT pages without free the guest page table
tracking data.
This patch clear the PPGTT reset logic and make the vGPU reset in
working order.
v2: refactor some logic to avoid code duplicated.
v3: remove useless macro and add comments from Christophe.
v4: keep reset logic in reset function.
Signed-off-by: Ping Gao <ping.a.gao@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
When untracked mmio is visited, too many log info will be printed out,
it may confuse the user, but most of the time, it is not the urgent case,
so use gvt_dbg_mmio() instead.
Signed-off-by: Zhao, Xinda <xinda.zhao@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
for a handled mmio reg, its default value is read from hardware, while
for an unhandled mmio regs, its default value would be random if not
explicitly set to 0
Signed-off-by: Zhao Yan <yan.y.zhao@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Linux guest is using this MMIO in lri command. Add cmd_access flag
for this mmio in gvt to avoid error log.
v2: change the mmio address to its macro name
Signed-off-by: Pei Zhang <pei.zhang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
add a whitelist to check the content of force-nonpriv registers
v3:
per He Min's comment, modify in_whitelist()'s return type to bool, and use
negative value as the return value for failure for force_nonpriv_write().
v2:
1. split a big patch into two smaller ones per zhenyu's comment.
this patch is the mmio handling part for force-nopriv registers
2. per zhenyu's comment, combine all non-priv registers into a single
MMIO_DFH entry
Signed-off-by: Zhao Yan <yan.y.zhao@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
the value of those registers should be applied to hardware on
context restoring
Signed-off-by: Zhao Yan <yan.y.zhao@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
send_display_send_uevent() sends two environment variable, and the
first one GVT_DISPLAY_READY is set including a new line at the end of
the string; that is obviously superfluous and wrong -- at least, it
*looks* so when you only read the code.
However, it doesn't appear in the actual output by a (supposedly
unexpected) trick. The code uses snprintf() and truncates the string
in size 20 bytes. This makes the string as GVT_DISPLAY_READY=0 or
...=1 including the trailing NUL-letter. That is, the '\n' found in
the format string is always cut off as a result.
Although the code gives the correct result, it is confusing. This
patch addresses it, just removing the superfluous '\n' from the format
string for avoiding further confusion. If the argument "ready" were
not a bool, the size 20 should be corrected as well. But it's a
bool, so we can leave the magic number 20 as is for now.
FWIW, the bug was spotted by a new GCC7 warning:
drivers/gpu/drm/i915/gvt/handlers.c: In function 'pvinfo_mmio_write':
drivers/gpu/drm/i915/gvt/handlers.c:1042:34: error: 'snprintf' output truncated before the last format character [-Werror=format-truncation=]
snprintf(display_ready_str, 20, "GVT_DISPLAY_READY=%d\n", ready);
^~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/i915/gvt/handlers.c:1042:2: note: 'snprintf' output 21 bytes into a destination of size 20
snprintf(display_ready_str, 20, "GVT_DISPLAY_READY=%d\n", ready);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Fixes: 04d348ae3f ("drm/i915/gvt: vGPU display virtualization")
Bugzilla: https://bugzilla.suse.com/show_bug.cgi?id=1025903
Reported-by: Richard Biener <rguenther@suse.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
some registers were missing or treated as BDW only. This patch is to fix it
avoid unhandled mmio wanrings
v2: update commit message according to zhenyu's comment
Signed-off-by: Zhao Yan <yan.y.zhao@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Due to the request replay, context switch interrupt may come after
gvt free the workload thus can cause a kernel NULL pointer kernel
panic. This patch will add a simple check to avoid this for a short
term.
From long term, gvt workload lifecycle doesn't match with i915 request
and need to find a proper way to manage this.
v4: simplify the NULL pointer check.
v5: add unlikely to optimize.
Signed-off-by: Chuanxiao Dong <chuanxiao.dong@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Windows guest will notitfy GVT-g to request more resources through g2v
interface, when its resources are not enough.
This patch is to handle this case and let vgpu enter failsafe mode to
avoid too many error messages.
Signed-off-by: Min He <min.he@intel.com>
Signed-off-by: Pei Zhang <pei.zhang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Testing with concurrent GGTT accesses no longer show the coherency
problems from yonder, commit 5bab6f60cb ("drm/i915: Serialise updates
to GGTT with access through GGTT on Braswell"). My presumption is that
the root cause was more likely fixed by commit 3b5724d702 ("drm/i915:
Wait for writes through the GTT to land before reading back"), along
with the use of WC updates to the global gTT in commit 8448661d65
("drm/i915: Convert clflushed pagetables over to WC maps". Given
that the original symptoms can no longer be reproduced, time to remove
the workaround.
Testcase: igt/gem_concurrent_blit
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170220124718.14796-1-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Right now this is just leaving a lot of spam in dmesg that makes real
issues more difficult to debug. As well (as noted by the comment right
above the DRM_DEBUG_KMS() call) this is normal behavior when there's
nothing connected to the DisplayPort connector.
Signed-off-by: Lyude <lyude@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJYoM2fAAoJEHm+PkMAQRiGr9MH/izEAMri7rJ0QMc3ejt+WmD0
8pkZw3+MVn71z6cIEgpzk4QkEWJd5rfhkETCeCp7qQ9V6cDW1FDE9+0OmPjiphDt
nnzKs7t7skEBwH5Mq5xygmIfkv+Z0QGHZ20gfQWY3F56Uxo+ARF88OBHBLKhqx3v
98C7YbMFLKBslKClA78NUEIdx0UfBaRqerlERx0Lfl9aoOrbBS6WI3iuREiylpih
9o7HTrwaGKkU4Kd6NdgJP2EyWPsd1LGalxBBjeDSpm5uokX6ALTdNXDZqcQscHjE
RmTqJTGRdhSThXOpNnvUJvk9L442yuNRrVme/IqLpxMdHPyjaXR3FGSIDb2SfjY=
=VMy8
-----END PGP SIGNATURE-----
Merge tag 'v4.10-rc8' into drm-next
Linux 4.10-rc8
Backmerge Linus rc8 to fix some conflicts, but also
to avoid pulling it in via a fixes pull from someone.
Setting retire=true is identical to using origin=ORIGIN_CS, so make the
same simplification to intel_fb_obj_flush() as already employed for
intel_fb_obj_invalidate().
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170222114049.28456-6-chris@chris-wilson.co.uk
Flushing the cachelines for an object is slow, can be as much as 100ms
for a large framebuffer. We currently do this under the struct_mutex BKL
on execution or on pageflip. But now with the ability to add fences to
obj->resv for both flips and execbuf (and we naturally wait on the fence
before CPU access), we can move the clflush operation to a workqueue and
signal a fence for completion, thereby doing the work asynchronously and
not blocking the driver or its clients.
v2: Introduce i915_gem_clflush.h and use a new name, split out some
extras into separate patches.
Suggested-by: Akash Goel <akash.goel@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170222114049.28456-5-chris@chris-wilson.co.uk
We have three different paths by which userspace wants to flush the
display plane (i.e. objects with obj->pin_display). Use a common helper
to identify those paths and to simplify a later change.
v2: Include the conditional in the name, i915_gem_object_flush_if_display
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170222114049.28456-3-chris@chris-wilson.co.uk
The change_domain tracepoint has been inaccurate for a few years - it
doesn't fully capture the domains, especially with userspace bypassing
them. It is defunct, misleading and time to be removed.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170222114049.28456-1-chris@chris-wilson.co.uk
Handling the dynamic charp module parameter requires us to copy it for
the error state, or remember to lock it when reading (in case it used
with 0600).
v2: Use __always_inline and __builtin_strcmp
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170221162619.15954-1-chris@chris-wilson.co.uk
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
When not using GuC submission, the ring buffer size for GVT context is
512KB which is the max size. When switching to GuC submission, the ring
buffer size is required to be less than 16KB. So use the GVT context
default ring buffer size if GuC submission is enabled.
Signed-off-by: Chuanxiao Dong <chuanxiao.dong@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170216063639.GA17107@intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Two new tracepoints placed at the call sites where requests are
actually passed to the GPU enable userspace to track engine
utilisation.
These tracepoints are only enabled when the
DRM_I915_LOW_LEVEL_TRACEPOINTS Kconfig option is enabled.
v2: Fix compilation with !CONFIG_DRM_I915_LOW_LEVEL_TRACEPOINTS.
v3: Name global seqno consistently across tracepoints.
v4: Remove port info from request out tracepoint. (Chris Wilson)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
i915_gem_ring_notify is more appropriate since we do not have
the request information at this point, but it is simply a
signal from the engine that some request has been completed.
v2:
* Always trace and log if there were any waiters.
* Rename to intel_engine_notify. (Chris Wilson)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
These new tracepoints are emitted once the request is ready to
be submitted to the GPU and once the request is about to
be submitted to the GPU, respectively.
Former condition triggers as soon as all the fences and
dependencies have been resolved, and the latter once the
backend is about to submit it to the GPU.
New tracepoint are enabled via the new
DRM_I915_LOW_LEVEL_TRACEPOINTS Kconfig option which is disabled
by default to alleviate the performance impact concerns.
v2: Move execute tracepoint to __i915_gem_request_submit.
(Chris Wilson)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Tracepoint is not used and won't be suitable for its replacement.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Provide the same information as the other request event classes.
v2: Pass in flags so we can properly report the blocking status.
(Chris Wilson)
v3: Log hex with 0x prefix for clarity.
v4: Derive blocking status from flags. (Chris Wilson)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Rename it to i915_gem_request_queue and fix the logged info
equivalent to the i915_gem_request even class. Also moved it
a bit further apart from the i915_gem_request_add tracepoint
since they otherwise provide similar information too close in
time.
v2: Remove sw fence singalling. We will rely on the soon to
come GuC scheduling backend to enable that. (Chris Wilson)
v3: Log hex with 0x prefix for clarity.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
At the moment only the global seqno is logged which is not set
until the request is ready for submission.
Add the per-contex seqno and the context hardware id which are
both interesting data points.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Compact the name of the macro and reg_state variable, and cache
some data in local variables to make the function more compact
and more readable.
v2: Fixup some checkpatch warnings.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170221095839.30525-1-tvrtko.ursulin@linux.intel.com
Pull locking updates from Ingo Molnar:
"The main changes in this cycle were:
- Implement wraparound-safe refcount_t and kref_t types based on
generic atomic primitives (Peter Zijlstra)
- Improve and fix the ww_mutex code (Nicolai Hähnle)
- Add self-tests to the ww_mutex code (Chris Wilson)
- Optimize percpu-rwsems with the 'rcuwait' mechanism (Davidlohr
Bueso)
- Micro-optimize the current-task logic all around the core kernel
(Davidlohr Bueso)
- Tidy up after recent optimizations: remove stale code and APIs,
clean up the code (Waiman Long)
- ... plus misc fixes, updates and cleanups"
* 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (50 commits)
fork: Fix task_struct alignment
locking/spinlock/debug: Remove spinlock lockup detection code
lockdep: Fix incorrect condition to print bug msgs for MAX_LOCKDEP_CHAIN_HLOCKS
lkdtm: Convert to refcount_t testing
kref: Implement 'struct kref' using refcount_t
refcount_t: Introduce a special purpose refcount type
sched/wake_q: Clarify queue reinit comment
sched/wait, rcuwait: Fix typo in comment
locking/mutex: Fix lockdep_assert_held() fail
locking/rtmutex: Flip unlikely() branch to likely() in __rt_mutex_slowlock()
locking/rwsem: Reinit wake_q after use
locking/rwsem: Remove unnecessary atomic_long_t casts
jump_labels: Move header guard #endif down where it belongs
locking/atomic, kref: Implement kref_put_lock()
locking/ww_mutex: Turn off __must_check for now
locking/atomic, kref: Avoid more abuse
locking/atomic, kref: Use kref_get_unless_zero() more
locking/atomic, kref: Kill kref_sub()
locking/atomic, kref: Add kref_read()
locking/atomic, kref: Add KREF_INIT()
...
The hardware requires that the tail pointer only advance in qword units,
so assert that the value we write is aligned to qwords, and similarly
enforce this restriction onto the request->tail.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170217163833.731-1-chris@chris-wilson.co.uk
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
Verify that the refcount of all power wells match their HW enabled
state at the end of modeset HW state readout.
Also add documentation on how the reference count for each power well is
supposed to be acquired during initialization and HW state readout.
Suggested by Ander.
Cc: Ander Conselvan de Oliveira <conselvan2@gmail.com>
Cc: David Weinehall <david.weinehall@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1487345986-26511-6-git-send-email-imre.deak@intel.com
Atm, power wells that BIOS has enabled, but which we don't explicitly
enable during power domain initialization would get disabled as we clear
the BIOS request bit in the given power well sync_hw hook. To prevent
this copy over any set request bits in the BIOS request register to the
driver request register and clear the BIOS request bit only afterwards.
This doesn't make a difference now, since we enable all power wells
during power domain initialization. A follow-up patchset will add power
wells for which this isn't true, so fix up the inconsistency.
Cc: Ander Conselvan de Oliveira <conselvan2@gmail.com>
Cc: David Weinehall <david.weinehall@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1487345986-26511-5-git-send-email-imre.deak@intel.com
Atm, in the power well sync_hw hook we are clearing all BIOS request
bits, not just the one corresponding to the given power well. This could
turn off an unrelated power well inadvertently if it didn't have a
request bit set in the driver request register.
This didn't cause a problem so far, since we enabled all power wells
explicitly before clearing the BIOS request register. A follow-up
patchset will add power wells that won't get enabled this way, so fix up
the inconsistency.
Note that this patch only makes the clearing of the BIOS req register
more logical. Power wells without a reference would still get disabled
by the end of power domain initialization, that is fixed by the next
patch.
v2:
- Clarify in the commit log that this patch doesn't address the case of
power wells without a reference. (Ander)
Cc: Ander Conselvan de Oliveira <conselvan2@gmail.com>
Cc: David Weinehall <david.weinehall@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1487345986-26511-4-git-send-email-imre.deak@intel.com
So far the sync_hw hook wasn't called for power wells not belonging to
any power domain, that is the GEN9 PW1 and MISC_IO power wells. This
wasn't a problem so far since the goal of the sync_hw hook - to clear
the corresponding BIOS request bit - was guaranteed by clearing the
whole BIOS request register elsewhere. This will change with the next
patch, so fix up the inconsistency.
While at it clean up the power well iterator helpers and move them to
the rest of iterators.
v2:
- Clean up the power well iterator helpers. (Ander)
- Move the helpers to i915_drv.h.
Cc: Ander Conselvan de Oliveira <conselvan2@gmail.com>
Cc: David Weinehall <david.weinehall@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1487345986-26511-3-git-send-email-imre.deak@intel.com
Doing an explicit enable/disable in the power well sync_hw hook based on
the power well's reference count is redundant, since by the time these
hooks are called all the power wells are enabled and have a reference.
So remove the redundant toggling.
This is needed by a follow-up patchset that adds power wells which we
can't enable/disable during power domain initialization and so want to
preserve their state until modeset init time.
Cc: Ander Conselvan de Oliveira <conselvan2@gmail.com>
Cc: David Weinehall <david.weinehall@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1487345986-26511-2-git-send-email-imre.deak@intel.com
The uncached mmio is sufficient to queue the mmio writes without raising
forcewake. The forced flush along with acquiring forcewake from the
posting read is not required for adjusting the RPS frequency.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170220094713.22874-3-chris@chris-wilson.co.uk
Reviewed-by: Radoslaw Szwichtenberg <radoslaw.szwichtenberg@intel.com>
If intel_set_rps() is called whilst the hw is disabled, just store the
requested frequency (from the user) for application when we wake the hw
up.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170220094713.22874-2-chris@chris-wilson.co.uk
Reviewed-by: Radoslaw Szwichtenberg <radoslaw.szwichtenberg@intel.com>
Instead of having each back-end provide identical guards, just have a
singular set in intel_set_rps() to verify that the caller is obeying the
rules.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Radoslaw Szwichtenberg <radoslaw.szwichtenberg@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170220094713.22874-1-chris@chris-wilson.co.uk
We don't need struct_mutex for acquiring an rpm wakeref, and do not need
to serialise those register read (it's the wrong mutex for those
registers in any case). Begone!
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170218150050.10414-1-chris@chris-wilson.co.uk
Reviewed-by: Radoslaw Szwichtenberg <radoslaw.szwichtenberg@intel.com>
Prevent the overflow check from firing on machines with the full 4lvl
page tables, that are not restricted to GEN8_LEGACY_PDES.
v2: Also fix the off-by-one in the compare
Fixes: 894ccebee2 ("drm/i915: Micro-optimise gen8_ppgtt_insert_entries()")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170217141455.19877-1-chris@chris-wilson.co.uk
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
There is a new version of DMC available for Geminilake.
It's release notes only mention:
- Enhancement in the FW to restore the PG2 state
v2: Fixed the platform name on commit message.
Noticed by Jani S.
v3: cook on top of drm-tip without depending on kbl
one so CI can check.
v4: make v3 on top of v2.
Cc: David Weinehall <tao@kernel.org>
Cc: Jani Saarinen <jani.saarinen@intel.com>
Cc: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com>
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1487295515-15396-1-git-send-email-rodrigo.vivi@intel.com
If we wait upon the full (i.e. all shared fences, or upon an exclusive
fence) reservation object successfully, we know that all fences beneath
it have been signaled, so long as no new fences were added whilst we
slept. If the reservation_object remains the same, as detected by its
seqcount, we can then reap all the fences upon completion.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170217151304.16665-6-chris@chris-wilson.co.uk
As a backup to waiting on a user-interrupt from the GPU, we use a heavy
and frequent timer to wake up the waiting process should we detect an
inconsistency whilst waiting. After seeing a "missed interrupt", the
next time we wait, we restart the heavy timer. This patch is more
reluctant to restart the timer and will only do so if we have not see any
interrupts since when we started the fake irq timer. If we are seeing
interrupts, then the waiters are being woken normally and we had an
incoherency that caused to miss last time - that is unlikely to reoccur
and so taking the risk of stalling again seems pragmatic.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170217151304.16665-5-chris@chris-wilson.co.uk
If the waiter was currently running, assume it hasn't had a chance
to process the pending interrupt (e.g, low priority task on a loaded
system) and wait until it sleeps before declaring a missed interrupt.
References: https://bugs.freedesktop.org/show_bug.cgi?id=99816
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170217151304.16665-4-chris@chris-wilson.co.uk
If an interrupt has been posted, and we were spinning on the active
seqno waiting for it to advance but it did not, then we can expect that
it will not see its advance in the immediate future and should call into
the irq-seqno barrier. We can stop spinning at this point, and leave the
difficulty of handling the coherency to the caller.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170217151304.16665-3-chris@chris-wilson.co.uk
When the timer expires for checking on interrupt processing, check to
see if any interrupts arrived within the last time period. If real
interrupts are still being delivered, we can be reassured that we
haven't missed the final interrupt as the waiter will still be woken.
Only once all activity ceases, do we have to worry about the waiter
never being woken and so need to install a timer to kick the waiter for
a slow arrival of a seqno.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170217151304.16665-2-chris@chris-wilson.co.uk
In Geminilake, the degamma table is enabled or disabled by the pipe CSC
enable bit, so its active even when running in the legacy gamma mode.
So always set sane values for that table, since the default value is all
zeroes.
This fixes blank screens after a suspend/resume cycle while legacy gamma
is in use.
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170217120630.6143-2-ander.conselvan.de.oliveira@intel.com
We have a few open coded instances in the execlists code and an
almost suitable helper in intel_ringbuf.c
We can consolidate to a single helper if we change the existing
helper to emit directly to ring buffer memory and move the space
reservation outside it.
v2: Drop memcpy for memset. (Chris Wilson)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170216122325.31391-2-tvrtko.ursulin@linux.intel.com
Use the "*batch++ = " style as in the ring emission for better
readability and also simplify the logic a bit by consolidating
the offset and size calculations and overflow checking. The
latter is a programming error so it is not required to check
for it after each write to the object, but rather do it once the
whole state has been written and fail the driver if something
went wrong.
v2: Rebase.
v3: Keep track of offsets and sizes in bytes for simplicity
and rename function pointer variable to _fn suffix.
(Chris Wilson)
v4: Fix size calc broken in v3 and add alignment warning. (Chris Wilson)
v5: Fix return code.
v6: I added an exit from loop in v5 but forgot to put back
the object teardown.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> (v5)
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
We can call the engine cleanup vfunc instead of duplicating the
decision making here.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
It is only used within intel_ringbuffer.c
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.oc.uk>
Lots of reduntant log info will be printed out during GPU reset,
including accessing untracked mmio register and fence register,
variable disable_warn_untrack is added previously to handle the
situation, but the accessing of fence register is ignored in the
previously patch, so add it back.
Besides, set the variable disable_warn_untrack to the defalut value
after GPU reset is finished.
Signed-off-by: Zhao, Xinda <xinda.zhao@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
New failsafe mode is introduced, when we detect guest not supporting
GVT-g.
In failsafe mode, we will ignore all the MMIO and cfg space read/write
from guest.
This patch can fix the issue that when guest kernel or graphics driver
version is too low, there will be a lot of kernel traces in host.
V5: rebased onto latest gvt-staging
V4: changed coding style by Zhenyu and Ping's advice
V3: modified coding style and error messages according to Zhenyu's comment
V2: 1) implemented MMIO/GTT/WP pages read/write logic; 2) used a unified
function to enter failsafe mode
Signed-off-by: Min He <min.he@intel.com>
Signed-off-by: Pei Zhang <pei.zhang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
As we switched to memremap for opregion, shouldn't use any __iomem
for that, and move to use memcpy instead.
This fixed static check errors for:
CHECK drivers/gpu/drm/i915//gvt/opregion.c
drivers/gpu/drm/i915//gvt/opregion.c:142:31: warning: incorrect type in argument 1 (different address spaces)
drivers/gpu/drm/i915//gvt/opregion.c:142:31: expected void *addr
drivers/gpu/drm/i915//gvt/opregion.c:142:31: got void [noderef] <asn:2>*opregion_va
drivers/gpu/drm/i915//gvt/opregion.c:160:35: warning: incorrect type in assignment (different address spaces)
drivers/gpu/drm/i915//gvt/opregion.c:160:35: expected void [noderef] <asn:2>*opregion_va
drivers/gpu/drm/i915//gvt/opregion.c:160:35: got void *
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
We do not need the BKL struct_mutex in order to allocate a GEM object,
nor to create the framebuffer, so resist the temptation to take the BKL
willy nilly. As this changes the locking contract around internal API
calls, the patch is a little larger than a plain removal of a pair of
mutex_lock/unlock.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170215105919.7347-2-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
We do not need to hold struct_mutex for destroying drm_i915_gem_objects
any longer, and with a little care taken over tracking
obj->framebuffer_references, we can relinquish BKL locking around the
destroy of intel_framebuffer.
v2: Use atomic check for WARN_ON framebuffer miscounting
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170216094621.3426-1-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
The physical object is treated as permanently pinned. If we fail to take
this initial pin during i915_gem_object_attach_phys() we need to revert
it back to an ordinary shmemfs object before reporting the failure.
v2: git-add
Reported-by: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170215163900.11606-1-chris@chris-wilson.co.uk
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
We wait upon jiffies, but report the time elapsed using a
high-resolution timer. This discrepancy can lead to us timing out the
wait prior to us reporting the elapsed time as complete.
This restores the squelching lost in commit e95433c73a ("drm/i915:
Rearrange i915_wait_request() accounting with callers").
Fixes: e95433c73a ("drm/i915: Rearrange i915_wait_request() accounting with callers")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.william.auld@gmail.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: <drm-intel-fixes@lists.freedesktop.org> # v4.10-rc1+
Cc: stable@vger.kernel.org
Link: http://patchwork.freedesktop.org/patch/msgid/20170216125441.30923-1-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Disable device ready before MIPI port shutdown command.
This helps to avoid mipi split screen issues.
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Vidya Srinivas <vidya.srinivas@intel.com>
Reviewed-by: Bob Paauwe <bob.j.paauwe@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1486551058-22596-8-git-send-email-vidya.srinivas@intel.com
If there is no OPREGION_ASLE_EXT then a VBT stored in mailbox #4 may
use the ASLE_EXT parts of the opregion. Adjust the vbt_size calculation
for a vbt in mailbox #4 for this.
This fixes the driver not finding the VBT on a jumper ezpad mini3
cherrytrail tablet and on a ACER SW5_017 machine.
Cc: stable@vger.kernel.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1487088758-30050-1-git-send-email-jani.nikula@intel.com
(cherry picked from commit dfb65e71ea)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
The i915_gem_object_wait_fence() uses an incoming timeout=0 to query
whether the current fence is busy or idle, without waiting. This can be
used by the wait-ioctl to implement a busy query.
Fixes: e95433c73a ("drm/i915: Rearrange i915_wait_request() accounting with callers")
Testcase: igt/gem_wait/basic-busy-write-all
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.william.auld@gmail.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: <drm-intel-fixes@lists.freedesktop.org> # v4.10-rc1+
Cc: stable@vger.kernel.org
Link: http://patchwork.freedesktop.org/patch/msgid/20170212215344.16600-1-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
(cherry picked from commit d892e9398e)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Explicitly disable stolen memory when running as a guest in a virtual
machine, since the memory is not mediated between clients and reserved
entirely for the host. The actual size should be reported as zero, but
like every other quirk we want to tell the user what is happening.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99028
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161109103905.17860-1-chris@chris-wilson.co.uk
Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Cc: stable@vger.kernel.org
(cherry picked from commit 04a68a35ce)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Until recently vlv_steal_power_sequencer() wasn't being called for
normal DP ports, and hence it could assert that it should only be
called for pipe A and B (since pipe C doesn't support eDP). However
that changed when we started to consider normal DP ports as well when
choosing a PPS. So we will now get spurious warnings when
vlv_steal_power_sequencer() does get called for pipe C. Avoid this by
moving the WARN down into vlv_detach_power_sequencer() where this
assertion should still hold.
Cc: Imre Deak <imre.deak@intel.com>
Cc: stable@vger.kernel.org
Fixes: 9f2bdb006a ("drm/i915: Prevent PPS stealing from a normal DP port on VLV/CHV")
References: https://bugs.freedesktop.org/show_bug.cgi?id=95287
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170208175254.10958-1-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
(cherry picked from commit d158694f45)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
We first wait for a request to be submitted to hw and assigned a seqno,
before we can wait for the hw to signal completion (otherwise we don't
know the hw id we need to wait upon). Whilst waiting for the request to
be submitted, we may exceed the user's timeout and need to propagate the
error back.
v2: Make ETIME into an error from wait_for_execute for consistent exit
handling.
Reported-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Fixes: 4680816be3 ("drm/i915: Wait first for submission, before waiting for request completion")
Testcase: igt/gem_wait/basic-await
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: <drm-intel-fixes@lists.freedesktop.org> # v4.10-rc1+
Cc: stable@vger.kernel.org
Link: http://patchwork.freedesktop.org/patch/msgid/20170208181238.7232-1-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
(cherry picked from commit 969bb72cbf)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
This patch makes PPGTT page table non-shrinkable when using aliasing PPGTT
mode. It's just a temporary solution for making GVT-g work.
Fixes: 2ce5179fe8 ("drm/i915/gtt: Free unused lower-level page tables")
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Michal Winiarski <michal.winiarski@intel.com>
Cc: Michel Thierry <michel.thierry@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Cc: Zhiyuan Lv <zhiyuan.lv@intel.com>
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1486559013-25251-2-git-send-email-zhi.a.wang@intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: <stable@vger.kernel.org> # v4.10
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
(cherry picked from commit e81ecb5e31)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Following a reset, the context and page directory registers are lost.
However, the queue of requests that we resubmit after the reset may
depend upon them - the registers are restored from a context image, but
that restore may be inhibited and may simply be absent from the request
if it was in the middle of a sequence using the same context. If we
prime the CCID/PD registers with the first request in the queue (even
for the hung request), we prevent invalid memory access for the
following requests (and continually hung engines).
v2: Magic BIT(8), reserved for future use but still appears unused.
v3: Some commentary on handling innocent vs guilty requests
v4: Add a wait for PD_BASE fetch. The reload appears to be instant on my
Ivybridge, but this bit probably exists for a reason.
Fixes: 821ed7df6e ("drm/i915: Update reset path to fix incomplete requests")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170207152437.4252-1-chris@chris-wilson.co.uk
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
(cherry picked from commit c0dcb203fb)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
execlist_update_context() will try to update PDPs in a context before a
ELSP submission only for full PPGTT mode, while PDPs was populated during
context initialization. Now the latter code path is removed. Let
execlist_update_context() also cover !FULL_PPGTT mode.
Fixes: 34869776c7 ("drm/i915: check ppgtt validity when init reg state")
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Michal Winiarski <michal.winiarski@intel.com>
Cc: Michel Thierry <michel.thierry@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Cc: Zhiyuan Lv <zhiyuan.lv@intel.com>
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1486377436-15380-1-git-send-email-zhi.a.wang@intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
(cherry picked from commit 04da811b3d)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
During system resume time initialization the HPD level on LSPCON ports
can stay low for an extended amount of time, leading to failed AUX
transfers and LSPCON initialization. Fix this by waiting for HPD to get
asserted.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99178
Cc: Shashank Sharma <shashank.sharma@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: <stable@vger.kernel.org> # v4.9+
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Shashank Sharma <shashank.sharma@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1485509961-9010-3-git-send-email-imre.deak@intel.com
(cherry picked from commit 390b4e0024)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
For LSPCON resume time initialization we need to sample the
corresponding pin's HPD level, but this is only available when HPD
detection is enabled. Currently we enable detection only when enabling
HPD interrupts which is too late, so bring the enabling of detection
earlier.
This is needed by the next patch.
Cc: Shashank Sharma <shashank.sharma@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: <stable@vger.kernel.org> # v4.9+
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Shashank Sharma <shashank.sharma@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1485509961-9010-2-git-send-email-imre.deak@intel.com
(cherry picked from commit 7fff8126d9)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
In commit 957870f934 ("drm/i915: Split out i915_gem_object_set_tiling()"),
I swapped an alignment check for IS_ALIGNED and in the process removed
the less-than check. That check turns out to be important as it was the
only rejection for stride == 0. Tvrtko did spot it, but I was
overconfident in the IS_ALIGNED() conversion.
Fixes: 957870f934 ("drm/i915: Split out i915_gem_object_set_tiling()")
Testcase: igt/gem_tiling_max_stride
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170203105652.27819-1-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
(cherry picked from commit 52da22e7ab)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
If we fail to dma-map the object, the most common cause is lack of space
inside the SW-IOTLB due to fragmentation. If we recreate the_sg_table
using segments of PAGE_SIZE (and single page allocations), we may succeed
in remapping the scatterlist.
First became a significant problem for the mock selftests after commit
5584f1b1d7 ("drm/i915: fix i915 running as dom0 under Xen") increased
the max_order.
Fixes: 920cf41949 ("drm/i915: Introduce an internal allocator for disposable private objects")
Fixes: 5584f1b1d7 ("drm/i915: fix i915 running as dom0 under Xen")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170202132721.12711-1-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: <stable@vger.kernel.org> # v4.10
(cherry picked from commit bb96dcf583)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
gvt-next-2017-02-15
- Chuanxiao's IOMMU workaround fix
- debug message cleanup from Changbin
- oops fix in fail path of workload submission when GPU reset from Changbin
- other misc fixes
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
From Zhenyu, "These are GVT-g changes for 4.11 merge window, mostly for
gvt init order fix that impacted resource handling for device model, the
one i915 change has been reviewed and acked."
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Panel GPIO control should be done based on platform. Add a check
to restrict VLV and CHT specific GPIO confirguration, so that
they dont apply to other platforms.
The VBT spec fails to mention the PMIC backlight control option is valid
only for VLV/CHT, and the field may be set to "PMIC" for BXT even if
PMIC is not desired or possible.
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Vidya Srinivas <vidya.srinivas@intel.com>
[Jani: amended commit message a bit and fixed indentation.]
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1486551058-22596-2-git-send-email-vidya.srinivas@intel.com
The max link parameters should be set/reset only on HPD or
connected boot case or on system resume.
Add a flag reset_link_params to intel_dp to decide when
to reset the max link parameters. This prevents the parameters
from getting reset/overwritten through all other
connector->funcs->detect() calls. This is important when link
training fails and the max link params are modified to the
lower fallback values.
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1486515251-23469-1-git-send-email-manasi.d.navare@intel.com
As the aliasing GTT is only accessed via the global GTT, we will never
use more of it than we expose via the Global GTT and so we only need to
preallocate sufficient space within the ppgtt for the full GTT. Equally,
if the aliasing GTT is smaller than the global GTT, we have a serious
issue and must bail.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170215084357.19977-21-chris@chris-wilson.co.uk
Once upon a time, back in the UMS days, we supported userspace
initialising the GTT and sharing portions of the GTT with other users.
Now, we own the GTT (both global and per-process) and the tables always
start at 0 - so we can remove i915_address_space.start and forget about
this old complication.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170215084357.19977-20-chris@chris-wilson.co.uk
We only operate on known extents (both for alloc/clear) and so we can use
both the knowledge of the bind/unbind range along with the knowledge of
the existing pagetable to avoid having to allocate temporary and
auxiliary bitmaps.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170215084357.19977-15-chris@chris-wilson.co.uk
We only operate on known extents (both for alloc/clear) and so we can use
both the knowledge of the bind/unbind range along with the knowledge of
the existing pagetable to avoid having to allocate temporary and
auxiliary bitmaps.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170215084357.19977-14-chris@chris-wilson.co.uk
