Bspec says we should skip the initialization of combo PHYs that are
already initialized. We'll need to reinit the PHYs more frequently
when exiting from DC6 (after the next patch), so let's make sure the
uninit sequence complies with the spec. For safety skip the init only if
all the PHY register fields have their expected values.
v2:
- Print 'Port X' as we do elsewhere instead of 'Port-X'. (Jose)
Bspec: 21257
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181106160621.23057-5-imre.deak@intel.com
Verify on CNL, ICL that the combo PHY HW state stayed intact after PHY
initialization.
v2:
- Print 'Port X' as we do elsewhere instead of 'Port-X'. (Jose)
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181106160621.23057-4-imre.deak@intel.com
Similarly to the GEN9_LP DPIO PHY code keep the CNL+ combo PHY code in a
separate file.
No functional change.
v2:
- Use SPDX license tag instead of boilerplate. (Rodrigo)
v3:
- Use MIT instead of GPL-2.0 license. (Ville)
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181106160621.23057-3-imre.deak@intel.com
BSpec says to clear the comp init HW flag too during combo PHY uninit,
so do that. The lack of this could badly interact with the PHY reinit
after a DC6/9 transition at least, where (after a follow-up patch fixing
the init code) we'd skip the initialization incorrectly due to this flag
being set.
BSpec: 21257
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181106160621.23057-2-imre.deak@intel.com
To enable DC5/6 power well 2 has to be disabled as for previous
platforms, so fix things up.
Bspec: 4234
Fixes: 67ca07e7ac ("drm/i915/icl: Add power well support")
Cc: Animesh Manna <animesh.manna@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181102182200.17219-1-imre.deak@intel.com
Unfortunately, it seems that the HPD IRQ storm problem from the early
days of Intel GPUs was never entirely solved, only mostly. Within the
last couple of days, I got a bug report from one of our customers who
had been having issues with their machine suddenly booting up very
slowly after having updated. The amount of time it took to boot went
from around 30 seconds, to over 6 minutes consistently.
After some investigation, I discovered that i915 was reporting massive
amounts of short HPD IRQ spam on this system from the DisplayPort port,
despite there not being anything actually connected. The symptoms would
start with one "long" HPD IRQ being detected at boot:
[ 1.891398] [drm:intel_get_hpd_pins [i915]] hotplug event received, stat 0x00440000, dig 0x00440000, pins 0x000000a0
[ 1.891436] [drm:intel_hpd_irq_handler [i915]] digital hpd port B - long
[ 1.891472] [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 5 - cnt: 0
[ 1.891508] [drm:intel_hpd_irq_handler [i915]] digital hpd port D - long
[ 1.891544] [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 7 - cnt: 0
[ 1.891592] [drm:intel_dp_hpd_pulse [i915]] got hpd irq on port B - long
[ 1.891628] [drm:intel_dp_hpd_pulse [i915]] got hpd irq on port D - long
…
followed by constant short IRQs afterwards:
[ 1.895091] [drm:intel_encoder_hotplug [i915]] [CONNECTOR:66:DP-1] status updated from unknown to disconnected
[ 1.895129] [drm:i915_hotplug_work_func [i915]] Connector DP-3 (pin 7) received hotplug event.
[ 1.895165] [drm:intel_dp_detect [i915]] [CONNECTOR:72:DP-3]
[ 1.895275] [drm:intel_get_hpd_pins [i915]] hotplug event received, stat 0x00200000, dig 0x00200000, pins 0x00000080
[ 1.895312] [drm:intel_hpd_irq_handler [i915]] digital hpd port D - short
[ 1.895762] [drm:intel_get_hpd_pins [i915]] hotplug event received, stat 0x00200000, dig 0x00200000, pins 0x00000080
[ 1.895799] [drm:intel_hpd_irq_handler [i915]] digital hpd port D - short
[ 1.896239] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x71450085
[ 1.896293] [drm:intel_get_hpd_pins [i915]] hotplug event received, stat 0x00200000, dig 0x00200000, pins 0x00000080
[ 1.896330] [drm:intel_hpd_irq_handler [i915]] digital hpd port D - short
[ 1.896781] [drm:intel_get_hpd_pins [i915]] hotplug event received, stat 0x00200000, dig 0x00200000, pins 0x00000080
[ 1.896817] [drm:intel_hpd_irq_handler [i915]] digital hpd port D - short
[ 1.897275] [drm:intel_get_hpd_pins [i915]] hotplug event received, stat 0x00200000, dig 0x00200000, pins 0x00000080
The customer's system in question has a GM45 GPU, which is apparently
well known for hotplugging storms.
So, workaround this impressively broken hardware by changing the default
HPD storm threshold from 5 to 50. Then, make long IRQs count for 10, and
short IRQs count for 1. This makes it so that 5 long IRQs will trigger
an HPD storm, and on systems with short HPD storm detection 50 short
IRQs will trigger an HPD storm. 50 short IRQs amounts to 100ms of
constant pulsing, which seems like a good middleground between being too
sensitive and not being sensitive enough (which would cause visible
stutters in userspace every time a storm occurs).
And just to be extra safe: we don't enable this by default on systems
with MST support. There's too high of a chance of MST support triggering
storm detection, and systems that are new enough to support MST are a
lot less likely to have issues with IRQ storms anyway.
As a note: this patch was tested using a ThinkPad T450s and a Chamelium
to simulate the short IRQ storms.
Changes since v1:
- Don't use two separate thresholds, just make long IRQs count for 10
each and short IRQs count for 1. This simplifies the code a bit
- Ville Syrjälä
Changes since v2:
- Document @long_hpd in intel_hpd_irq_storm_detect, no functional
changes
Changes since v4:
- Remove !! in long_hpd assignment - Ville Syrjälä
- queue_hp = true - Ville Syrjälä
Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181106213017.14563-6-lyude@redhat.com
This is rather confusing to look at as-is:
dev_priv->display.hpd_irq_setup(dev_priv); in intel_hpd_irq_handler()
handles disabling the actual HPD IRQ, while
intel_hpd_irq_storm_disable() handles moving the HPD pin state over from
MARK_DISABLED to DISABLED along with enabling polling for it.
Changes since v3:
- Rename i915_hpd_irq_storm_disable() to
i915_hpd_irq_storm_switch_to_polling() - Rodrigo Vivi
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181106213017.14563-5-lyude@redhat.com
Currently in intel_hpd_irq_storm_detect() when we detect that the last
recorded hotplug wasn't within the period defined by
HPD_STORM_DETECT_DELAY, we make the mistake of resetting the HPD count
to 0 without incrementing it. This results in us only enabling storm
detection when we go +2 above the threshold, e.g. an HPD threshold of 5
would not trigger a storm until we reach a total of 7 hotplugs.
So: rework the code a bit so we reset the HPD count when
HPD_STORM_DETECT_DELAY has passed, then increment the count afterwards.
Also, clean things up a bit to make it easier to undertand.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181106213017.14563-4-lyude@redhat.com
This hasn't caused any issues yet that I'm aware of, but as Ville
Syrjälä pointed out - we need to make sure that
intel_connector->mst_port is set before initializing MST connectors,
since in theory we could potentially check intel_connector->mst_port in
i915_hpd_poll_init_work() after registering the connector but before
having written it's value.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: stable@vger.kernel.org
Link: https://patchwork.freedesktop.org/patch/msgid/20181106213017.14563-2-lyude@redhat.com
No need for the posting reads in the plane update/disable hooks.
If we need a posting read for something then a single one at the
very end would be sufficient. We have that anyway in the form
of eg. scanline/frame counter reads.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181101150605.18235-2-ville.syrjala@linux.intel.com
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Exercising the gpu reloc path strenuously revealed an issue where the
updated relocations (from MI_STORE_DWORD_IMM) were not being observed
upon execution. After some experiments with adding pipecontrols (a lot
of pipecontrols (32) as gen4/5 do not have a bit to wait on earlier pipe
controls or even the current on), it was discovered that we merely
needed to delay the EMIT_INVALIDATE by several flushes. It is important
to note that it is the EMIT_INVALIDATE as opposed to the EMIT_FLUSH that
needs the delay as opposed to what one might first expect -- that the
delay is required for the TLB invalidation to take effect (one presumes
to purge any CS buffers) as opposed to a delay after flushing to ensure
the writes have landed before triggering invalidation.
Testcase: igt/gem_tiled_fence_blits
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: stable@vger.kernel.org
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181105094305.5767-1-chris@chris-wilson.co.uk
The i915 driver uses shmemfs to allocate backing storage for gem
objects. These shmemfs pages can be pinned (increased ref count) by
shmem_read_mapping_page_gfp(). When a lot of pages are pinned, vmscan
wastes a lot of time scanning these pinned pages. In some extreme case,
all pages in the inactive anon lru are pinned, and only the inactive
anon lru is scanned due to inactive_ratio, the system cannot swap and
invokes the oom-killer. Mark these pinned pages as unevictable to speed
up vmscan.
Export pagevec API check_move_unevictable_pages().
This patch was inspired by Chris Wilson's change [1].
[1]: https://patchwork.kernel.org/patch/9768741/
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dave Hansen <dave.hansen@intel.com>
Signed-off-by: Kuo-Hsin Yang <vovoy@chromium.org>
Acked-by: Michal Hocko <mhocko@suse.com> # mm part
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Dave Hansen <dave.hansen@intel.com>
Acked-by: Andrew Morton <akpm@linux-foundation.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20181106132324.17390-1-chris@chris-wilson.co.uk
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
gvt-fixes-2018-11-07
- Fix invalidate of old ggtt entry (Hang)
- Fix partial ggtt entry update in any order (Hang)
- Fix one mask setting for chicken reg (Xinyun)
- Fix eDP warning in guest (Longhe)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
From: Zhenyu Wang <zhenyuw@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181107023137.GO25194@zhen-hp.sh.intel.com
We're no longer programming any watermarks when we're disabling
a pipe. That means ilk_wm_merge() & co. will keep considering
the any pipe that is getting disabled as still enabled. Thus we
either get no LP1+ watermakrs (ilk-ivb), or we get suboptimal
ones (hsw-bdw).
This seems to have been broken by commit b6b178a772 ("drm/i915:
Calculate ironlake intermediate watermarks correctly, v2."). Before
that we apparently had some difference between the intermediate
and optimal watermarks and so we would program the optiomal ones.
Now intermediate and optimal are identical for disabled pipes
and so we don't program either.
Fix this by programming the intermediate watermarks even for
disabled pipes. We were already doing that for skl+. We'll
leave out gmch platforms for now since those do the merging
in a different manner and should work as is. We'll want to
unify this eventually, but play it safe for now and just put
in a FIXME.
Cc: stable@vger.kernel.org
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Fixes: b6b178a772 ("drm/i915: Calculate ironlake intermediate watermarks correctly, v2.")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181025130536.29024-1-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> #irc
(cherry picked from commit a748faea3b)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
We deinit the lpe audio device before we call
drm_atomic_helper_shutdown(), which means the platform device
may already be gone when it comes time to shut down the crtc.
As we don't know when the last reference to the platform
device gets dropped by the audio driver we can't assume that
the device and its data are still around when turning off the
crtc. Mark the platform device as gone as soon as we do the
audio deinit.
Cc: stable@vger.kernel.org
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181105194604.6994-1-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
(cherry picked from commit f45a7977d1)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Since the flags are being used to operate on a u64 variable, they too
need to be marked as such so that the inverses are full width (and not
zero extended on 32b kernels and bdw+).
Reported-by: Sergii Romantsov <sergii.romantsov@globallogic.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: stable@vger.kernel.org
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181102161232.17742-2-chris@chris-wilson.co.uk
(cherry picked from commit 83b466b1dc)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
This patch fixes the macros used for defining the DFLEXDPMLE
register bit fields. This accounts for changes in the spec.
Fixes: a2bc69a1a9 ("drm/i915/icl: Add register definition for DFLEXDPMLE")
Cc: Animesh Manna <animesh.manna@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Jose Roberto de Souza <jose.souza@intel.com>
Cc: <stable@vger.kernel.org> # v4.19+
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181023191248.26418-1-manasi.d.navare@intel.com
(cherry picked from commit b4335ec0a3)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Let's not leak obj->framebuffer_references when we decide that
the framebuffer domensions are not suitable for NV12.
Cc: stable@vger.kernel.org
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Vidya Srinivas <vidya.srinivas@intel.com>
Fixes: e44134f267 ("drm/i915: Add NV12 support to intel_framebuffer_init")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181029140031.11765-1-ville.syrjala@linux.intel.com
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
(cherry picked from commit 3b90946fcb)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
While checking the opportunity to add a display_gen
check to allow glk and cnl to be on same bucket I noticed
these FIXME cases here.
So I got the confirmation from HW architect that we actually
never needed this workaround.
"GLK supports 2 pixel per clock, so pixel clock can be up to 2 * cdclk."
So, this reverts commit 97f55ca5b6 ("drm/i915/glk: limit pixel
clock to 99% of cdclk workaround")
Fixes: 97f55ca5b6 ("drm/i915/glk: limit pixel clock to 99% of cdclk workaround")
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Madhav Chauhan <madhav.chauhan@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Clinton Taylor <clinton.a.taylor@intel.com>
Cc: Arthur J Runyan <arthur.j.runyan@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181026005636.22274-1-rodrigo.vivi@intel.com
(cherry picked from commit 42882336e6)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Since we use a 64b virtual GTT irrespective of the system, we want to
ensure that the GTT computations remains 64b even on 32b systems,
including treatment of huge virtual pages.
No code generation changes on 64b:
Reported-by: Sergii Romantsov <sergii.romantsov@globallogic.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108282
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: stable@vger.kernel.org
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181025091823.20571-1-chris@chris-wilson.co.uk
(cherry picked from commit 9125963a94)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
The 16Gb DIMM w/a is not applicable to BXT or GLK. Limit it to
the appropriate platforms.
This was especially harsh on GLK since we don't even try to read
the DIMM information on that platforms, hence valid_dimm was
always false and thus we always tried to apply the w/a.
Furthermore the w/a pushed the level 0 latency above the
level 1 latency, which doesn't really make sense.
v2: Do the check when populating is_16gb_dimm (Mahesh)
Cc: Mahesh Kumar <mahesh1.kumar@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Fixes: 86b592876c ("drm/i915: Implement 16GB dimm wa for latency level-0")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181023182102.31549-1-ville.syrjala@linux.intel.com
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Mahesh Kumar <mahesh1.sh.kumar@gmail.com>
(cherry picked from commit 5d6f36b27d)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
We deinit the lpe audio device before we call
drm_atomic_helper_shutdown(), which means the platform device
may already be gone when it comes time to shut down the crtc.
As we don't know when the last reference to the platform
device gets dropped by the audio driver we can't assume that
the device and its data are still around when turning off the
crtc. Mark the platform device as gone as soon as we do the
audio deinit.
Cc: stable@vger.kernel.org
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181105194604.6994-1-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
As we may have to iterate a few thousand elements to acquire and release
the shmemfs backing storage for a GPU object, we need to break up the
long loop with cond_resched() to retain a modicum of low latency for
other processes.
Testcase: igt/benchmarks/gem_syslatency
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Kuo-Hsin Yang <vovoy@chromium.org>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181105170640.26905-1-chris@chris-wilson.co.uk
Plane input CSC needs to be enabled to convert frambuffers from
YUV to RGB. This is needed for bottom 3 planes on ICL, rest of
the planes have hardcoded conversion and taken care by the legacy
code.
This patch defines the co-efficient values for YUV to RGB conversion
in BT709 and BT601 formats. It programs the coefficients and enables
the plane input csc unit in hardware.
This has been verified and tested by Maarten and the change is working
as expecpted.
v2: Addressed Maarten's and Ville's review comments and added the
coefficients in a 2D array instead of independent Macros.
v3: Added individual coefficient matrix (9 values) instead of 6
register values as per Maarten's comment. Also addresed a shift
issue with B channel coefficient.
v4: Added support for Limited Range Color Handling
v5: Fixed Matt and Maarten's review comments.
v6: Added human readable matrix values for YUV to RGB Conversion along
with just the bspec register values, as per Matt's suggestion.
v7: Refactored the code, move csc coefficient programming function to
intel_sprite.c and made it static as per Ville's review comment.
v8: Addressed Ville's review comment. Called the coefficient programming
from within the skl_program_plane and used I915_WRITE_FW instead of
I915_WRITE.
v9: Fixed Ville's review comments.
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1541099420-12419-3-git-send-email-uma.shankar@intel.com
Defined the plane input csc coefficient registers and macros.
6 registers are used to program a total of 9 coefficients,
added macros to define each of them for all the planes
supporting the feature on pipes. On ICL, bottom 3 planes
have this capability.
v2: Segregated the register macro definition as separate patch
as per Maarten's suggestion.
v3: Removed a redundant 3rd Pipe register definition and
simplified the equally spaced register definition by adding an
offset as per Matt's comment.
v4: No Change
v5: Renamed the register Macro as per Matt's suggestion.
v6: No Change
v7: No Change
v8: No Change
v9: No Change
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1541099420-12419-2-git-send-email-uma.shankar@intel.com
We're no longer programming any watermarks when we're disabling
a pipe. That means ilk_wm_merge() & co. will keep considering
the any pipe that is getting disabled as still enabled. Thus we
either get no LP1+ watermakrs (ilk-ivb), or we get suboptimal
ones (hsw-bdw).
This seems to have been broken by commit b6b178a772 ("drm/i915:
Calculate ironlake intermediate watermarks correctly, v2."). Before
that we apparently had some difference between the intermediate
and optimal watermarks and so we would program the optiomal ones.
Now intermediate and optimal are identical for disabled pipes
and so we don't program either.
Fix this by programming the intermediate watermarks even for
disabled pipes. We were already doing that for skl+. We'll
leave out gmch platforms for now since those do the merging
in a different manner and should work as is. We'll want to
unify this eventually, but play it safe for now and just put
in a FIXME.
Cc: stable@vger.kernel.org
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Fixes: b6b178a772 ("drm/i915: Calculate ironlake intermediate watermarks correctly, v2.")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181025130536.29024-1-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> #irc
On GEN9 LP (BXT/GLK) DC6 is not supported, so don't print the counter
on those platforms. So far we did this on GLK too.
While at it warn if we forgot to adjust the printout properly for a
new platform. (Rodrigo)
Testcase: igt/pm_dc/dc6-dpms
Cc: Jyoti Yadav <jyoti.r.yadav@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181031200220.11608-1-imre.deak@intel.com
The MG DP mode needs to be configured for Type C static/fixed/legacy
HDMI ports too, the same way as it's configured for Type C
static/fixed/legacy, fix this.
Bspec: 4232, 21735
Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Tested-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181102192656.4472-3-imre.deak@intel.com
The MG PHY clock gating needs to be configured for Type C
static/fixed/legacy HDMI ports the same way it's configured for Type C
static/fixed/legacy and aternate mode DP ports, fix this.
Bspec: 4232, 21735
Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Tested-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181102192656.4472-2-imre.deak@intel.com
Similar to DSC DPCD registers, let us cache
FEC_CAPABLE register to avoid using stale
values. With this we can avoid aux reads
everytime and instead read the cached values.
v2: Avoid using memset and array for a single
field. (Manasi,Jani)
v3: Print FEC CAPABILITY value. (Manasi)
Suggested-by: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181102041455.15818-1-anusha.srivatsa@intel.com
Since the flags are being used to operate on a u64 variable, they too
need to be marked as such so that the inverses are full width (and not
zero extended on 32b kernels and bdw+).
Reported-by: Sergii Romantsov <sergii.romantsov@globallogic.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: stable@vger.kernel.org
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181102161232.17742-2-chris@chris-wilson.co.uk
-----BEGIN PGP SIGNATURE-----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=5lmL
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2018-11-02' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"Pretty much a normal fixes pull pre-rc1, mostly amdgpu fixes, one i915
link training regression fix, and a couple of minor panel/bridge fixes
and a panel quirk"
* tag 'drm-next-2018-11-02' of git://anongit.freedesktop.org/drm/drm: (37 commits)
drm/amdgpu: revert "enable gfxoff in non-sriov and stutter mode by default"
drm/amd/pp: Print warning if od_sclk/mclk out of range
drm/amd/pp: Fix pp_sclk/mclk_od not work on Vega10
drm/amd/pp: Fix pp_sclk/mclk_od not work on smu7
drm/amd/powerplay: no MGPU fan boost enablement on DPM disabled
drm/amdgpu: Fix skipping hangged job reset during gpu recover.
drm/amd/powerplay: revise Vega20 pptable version check
drm/amd/display: set backlight level limit to 1
drm/panel: simple: Innolux TV123WAM is actually P120ZDG-BF1
dt-bindings: drm/panel: simple: Innolux TV123WAM is actually P120ZDG-BF1
drm/bridge: ti-sn65dsi86: Remove the mystery delay
drm/panel: simple: Add "no-hpd" delay for Innolux TV123WAM
drm/panel: simple: Support panels with HPD where HPD isn't connected
dt-bindings: drm/panel: simple: Add no-hpd property
drm/edid: Add 6 bpc quirk for BOE panel.
drm/amdgpu: fix reporting of failed msg sent to SMU (v2)
drm/amdgpu: Fix compute ring 1.0.0 failure after reset
drm/amdgpu: fix VM leaf walking
drm/amdgpu: fix amdgpu_vm_fini
drm/amd/powerplay: commonize the API for retrieving current clocks
...
The registers DPCSSS,DPSP,DPMLE1 and DPPMS are all at an offset
from the base - which is the FLexi IO Adaptor. Lets follow the
offset calculation while accessing these registers.
v2:
- Follow spec for numbering - s/0/1(Lucas)
- s/FIA_1/FIA1_BASE (Anusha)
v3:
- Remove register offset defines. (Jani)
- Update comment. (Anusha)
v4: rebase. Remove comment.(Lucas)
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181101185557.29585-1-anusha.srivatsa@intel.com
Use the newly added "max bpc" connector property to limit pipe bpp.
V3: Use drm_connector_state to access the "max bpc" property
V4: Initialize the drm property, add suuport to DP(Ville)
V5: Use the property in the connector and fix CI failure(Ville)
V6: Use the core function to attach max_bpc property, remove the redundant
clamping of pipe bpp based on connector info
V7: Fix Checkpatch warnings
V9: Cleanup connected_sink_max_bpp and fix initial value in DP(Ville)
V12: Fix debug message(Ville)
V13: Remove the redundant check and simplify the check logic(Stan)
V14: Fix the check in connected_sink_max_bpp(Stan)
v15 (From Manasi): Add missing break (Stan)
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Kishore Kadiyala <kishore.kadiyala@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181023014400.16055-1-manasi.d.navare@intel.com
Although there's nothing crucial missing, it's been a long time since
the last backmerge. Catch up with drm-next.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
This patch fixes the naming of the registers:
s/PIPE_DSS_CTL/ICL_PIPE_DSS_CTL
And also fix the hex values to lower case, to match
rest of the definitions.
Manasi noticed this with the patch that was merged.
v2: fix "Fixes" tag.
Fixes: 8b1b558d69 ("drm/i915/icl: Add DSS_CTL Registers")
Suggested-by: Manasi Navare <manasi.d.navare@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181101214216.8958-1-anusha.srivatsa@intel.com
BIOS can leave the PLL to port mapping enabled, even if the
corresponding encoder is disabled. Disable the port mapping in this
case.
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181101140427.31026-9-imre.deak@intel.com
Most of the AUX_CH_CTL flags are concerned with DP AUX transfer
parameters. As opposed to this the flag specifying the thunderbolt vs.
non-thunderbolt mode of the port is not related to AUX transfers at all
(rather it's repurposed to enable either TBT or non-TBT PHY HW blocks).
The programming has to be done before enabling the corresponding AUX
power well, so make it part of the power well code.
v3:
- Use existing enable/disable helpers instead of opencoding. (Jose)
- Fix type of is_tc_tbt to remain a bitfield. (Lucas)
- Add comment describing the is_tc_tbt power well flag. (Lucas)
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108548
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181101140427.31026-8-imre.deak@intel.com
DDI/TypeC ports need the AUX power domain for main link functionality
even when they operate in HDMI static mode, so enable the power domain
for these ports too.
v4:
- Rebase on the upstream ICL pre_pll_enable change.
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181101140427.31026-7-imre.deak@intel.com
For DDI/TypeC ports the AUX power domain needs to be enabled before the
port's PLL is enabled, so move the enabling earlier accordingly.
v2:
- Preserve the pre_pll hook for GEN9_LP. (Ville)
v3:
- Add related BSpec entries to commit log. (Jose)
v4:
- Rebase on the upstream ICL pre_pll_enable change.
BSpec: 21750, 22243
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181101140427.31026-6-imre.deak@intel.com
From ICL onwards the AUX power domain may change dynamically based on
whether a DDI/TypeC port is in thunderbolt or non-thunderbolt mode, so
use a helper function instead of a static field to get the current
domain.
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181101140427.31026-5-imre.deak@intel.com
From ICL onwards DDI/TypeC ports - even in HDMI static mode - need to know
which AUX CH belongs to them, so initialize aux_ch for those ports too.
For consistency do this for all HDMI ports, not only for DDI/TypeC ones.
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181101140427.31026-4-imre.deak@intel.com
From ICL onwards all DDI/TypeC ports - even working in HDMI mode - need
to know their corresponding AUX CH, so move the field to a common
struct.
No functional change.
v3:
- Add code comment about which ports aux_ch is used for. (Jose)
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181101140427.31026-3-imre.deak@intel.com
From ICL onwards all the DDI/TypeC ports - even working in HDMI mode -
need to know their corresponding AUX channel, so move the corresponding
helper to a common place.
No functional change.
v4:
- Fix 'no space is necessary after a cast' checkpatch warn.
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181101140427.31026-2-imre.deak@intel.com
Gen11 Display suports 32 planes in total. Enable the new format in context
status to be used and expanded to 32 planes.
V2: Move the WA to display WA's(Chris)
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michel Thierry <michel.thierry@intel.com>
Cc: James Ausmus <james.ausmus@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181030084504.21537-1-radhakrishna.sripada@intel.com
CNL A stepping was the only affected there.
But also it is time to clean old pre-production
CNL Workarounds, so let's just remove and clean
this W/A.
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Clint Taylor <Clinton.A.Taylor@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181031162845.12419-4-rodrigo.vivi@intel.com
Let's introduce the WA number that is the
cause of having NV12 disabled on both SLK and BXT.
According to Spec:
WA 0870: "Display flickers with NV12 video playback in
Y tiling mode.
WA: Use YUV422 surface format instead of NV12."
v2: remove the useless dead code and consequently
avoiding device info flag. (Ville)
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181031162845.12419-3-rodrigo.vivi@intel.com
According to BSpec this is not needed anymore:
"This workaround is no longer needed since NV12
support is dropped for the affected projects.
"
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181031162845.12419-2-rodrigo.vivi@intel.com
First of all I believe this WA as written here was wrong.
Because it is listed on BSpec only for SKL and BXT, exactly
the only 2 platforms skipped here.
But also it is written there that we don't need this WA
anymore:
"This workaround is no longer needed since NV12 support is
dropped for the affected projects in #0870."
SO, let's kill it.
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Vidya Srinivas <vidya.srinivas@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181031162845.12419-1-rodrigo.vivi@intel.com
Add missing block that takes care of inline intel_suspend_complete
for DC9 on ICL.
Daniele noticed this was part of original patch but missed on
on merged commit ("drm/i915/icl: Enable DC9 as lowest possible
state during screen-off").
Fixes: 3e68928b7d ("drm/i915/icl: Enable DC9 as lowest possible state during screen-off")
Cc: Imre Deak <imre.deak@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Animesh Manna <animesh.manna@intel.com>
Cc: James Ausmus <james.ausmus@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
[Rodrigo added a commit message while merging]
Link: https://patchwork.freedesktop.org/patch/msgid/20181031202726.4021-1-anusha.srivatsa@intel.com
This patch detects DSI presence for ICL platform
by reading VBT. DSI detection is done while initializing
DSI using newly added function intel_gen11_dsi_init.
v2 by Jani:
- Preserve old behavour of intel_bios_is_dsi_present()
- s/intel_gen11_dsi_init/icl_dsi_init/g
Signed-off-by: Madhav Chauhan <madhav.chauhan@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/2324cdfc8918bda3165354e5e0d15053b1074f14.1540900289.git.jani.nikula@intel.com
In case of Legacy DP connector on TypeC port, the
flex IO DPMLE register is set to number of lanes configured
by the display driver which will be programmed into DDI_BUF_CTL
PORT_WIDTH_SELECTION.
This needs to be programmed before enabling the shared PLLs hence
add a pre_pll_enable hook for ICL and add this programming in that hook.
v2:
* Remove the check for combophy port (Jose)
* Simplify the port reversal check logic (Jose)
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Jose Roberto de Souza <jose.souza@intel.com>
Cc: Animesh Manna <animesh.manna@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Acked-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181023191248.26418-2-manasi.d.navare@intel.com
This patch fixes the macros used for defining the DFLEXDPMLE
register bit fields. This accounts for changes in the spec.
Fixes: a2bc69a1a9 ("drm/i915/icl: Add register definition for DFLEXDPMLE")
Cc: Animesh Manna <animesh.manna@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Jose Roberto de Souza <jose.souza@intel.com>
Cc: <stable@vger.kernel.org> # v4.19+
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181023191248.26418-1-manasi.d.navare@intel.com
Otherwise it would be in a inconsistent state as port is disconnected
but with a valid tc type.
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181030215750.28213-3-jose.souza@intel.com
Otherwise it would be in a inconsistent state as port is disconnected
but with a valid tc type.
Also setting it to unknown will earlier return
icl_tc_phy_disconnect() for any future calls to
intel_digital_port_connected(), this way we don't need to check if
port is marked as safe everytime.
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181030215750.28213-2-jose.souza@intel.com
Besides of give the expected output of i915_display_info it will also
avoid some aux ch transactions that would timeout by obvious reasons.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181030215750.28213-1-jose.souza@intel.com
Let's not leak obj->framebuffer_references when we decide that
the framebuffer domensions are not suitable for NV12.
Cc: stable@vger.kernel.org
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Vidya Srinivas <vidya.srinivas@intel.com>
Fixes: e44134f267 ("drm/i915: Add NV12 support to intel_framebuffer_init")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181029140031.11765-1-ville.syrjala@linux.intel.com
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Use intel_panel_actually_set_backlight() instead of a direct
call to pwm_config() in pwm_disable_backlight().
The main benefit is consistent debug logging when we turn off the
backlight. Currently we see nothing in dmesg which made me wonder
whether the backlight was even getting turned off properly.
The second benefit is consistency; This is what we do for all
the other backlight implementations.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181024155208.18987-1-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Jani Nikula <jani.nikula@intel.com>
When DSC is supported we need to validate the modes based on the
maximum supported compressed BPP and maximum supported slice count.
This allows us to allow the modes with pixel clock greater than the
available link BW as long as it meets the compressed BPP
and slice count requirements.
v3:
* Use the macro for dsc sink support (Jani N)
v2:
* Properly comment why we are right shifting the bpp value (Anusha)
Cc: Gaurav K Singh <gaurav.k.singh@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: Gaurav K Singh <gaurav.k.singh@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181031001923.31442-6-manasi.d.navare@intel.com
This patch adds helpers for calculating the maximum compressed BPP
supported with small joiner.
This also adds a helper for calculating the slice count in case
of small joiner.
These are inside intel_dp since they take into account hardware
limitations.
v6:
* Take mode_clock and mode_hdisplay as input arguments
so that this can be called in intel_dp_mode_valid (Manasi)
v5:
* Get the max slice width from DPCD
* Check against Min_Slice_width of 2560 (Anusha)
v4:
* #defines for PPR in slice count helper (Gaurav)
v3:
* Simply logic for bpp (DK)
* Limit the valid slice count by max supported by Sink (Manasi)
v2:
* Change the small joiner RAM buffer constant as bspec changed (Manasi)
* rename it as SMALL_JOINER since we are not enabling
big joiner yet (Anusha)
Cc: Gaurav K Singh <gaurav.k.singh@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: Gaurav K Singh <gaurav.k.singh@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181031001923.31442-5-manasi.d.navare@intel.com
DSC is supported on eDP starting GEN 10 display (on GLK) and on DP starting
GEN 11.
This patch implements the discovery phase of DSC. On hotplug,
source reads the DSC DPCD register set (0x00060 - 0x0006F) to
read the decompression capabilities of the sink device.
This entire block of registers is cached in intel_dp so that
capability information can be used during DSC configuration
phase during compute_config phase of the modeset.
For eDP, this caching happens during the eDP initialization.
This caching is done only for eDP and DP rev >= 1.4
v5:
* Fix the block comment (Gaurav)
* Fix the commit message DSC DPCD addresses (Gaurav)
* Use DRM_ERROR for dpcd_read fail (Gaurav,Anusha)
v4:
* Cache these only for Gen >= 11
v3:
* Remove the dsc_sink_support field in intel_dp (Jani N)
v2:
* Clear the cached registers on hotplug always (Jani N)
* Combine the eDP and DP caching in same function (Jani N)
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Cc: Gaurav K Singh <gaurav.k.singh@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: Gaurav K Singh <gaurav.k.singh@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181031001923.31442-3-manasi.d.navare@intel.com
Add the newly added slice_row_per_frame parameter
in the Picture Parameter Set registers.
This defines the number of vertically stacked slices
in a frame.
Credits to Manasi for noticing bSpec change.
Suggested-by: Manasi Navare <manasi.d.navare@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181031001923.31442-1-manasi.d.navare@intel.com
Program the timeout values (in escape clock) for HS TX, LP RX and TA
timeout.
HX TX: Ensure that host does not continuously transmit in the HS
state. If this timer expires, then host will gracefully end its HS
transmission and allow the link to enter into LP state.
LP RX: Monitor the length of LP receptions from Peripheral. If timeout
happens then host will drive the stop state onto all data lanes (only
Data Lane 0 should be receiving anything from the Peripheral). This
effectively takes back ownership of the bus transmit in the HS state.
TA timeout: Timeout valuefor monitoring Bus Turn-Around (BTA) sequence.
BTA sequence should complete within a bounded amount of time, with
peripheral acknowledging BTA by driving the stop state.
v2 by Jani:
- Rebase
- Use intel_dsi_bitrate() and intel_dsi_tlpx_ns(intel_dsi)
- Squash HX TX, LP RX and TA timeout into one patch
- Fix bspec mode set sequence reference
- Add FIXME about two timeouts
Signed-off-by: Madhav Chauhan <madhav.chauhan@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/60e610ccffe5f8c09dee1c65828f28f25227efce.1540900289.git.jani.nikula@intel.com
This patch sends command and executes display off,
assert reset, power off VBT seqeuences to power
down DSI panel. Patch also adds high level function
to wrap all the panel sepcific programming during
DSI disabling.
Signed-off-by: Madhav Chauhan <madhav.chauhan@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/efdafbf6b4d31123738b87b2d8264a9b5553eb32.1540900289.git.jani.nikula@intel.com
Driver needs payload/header credits for sending any command
and data over DSI link. These credits are released once command
or data sent to link. This patch adds functions to wait for releasing
of payload and header credits.
As per BSPEC, driver needs to ensure that all of commands/data
has been dispatched to panel before the transcoder is enabled.
This patch implement those steps i.e. sending NOP DCS command,
wait for header/payload credit to be released etc.
v2 by Jani:
- squash the credit wait helpers patch with the first user
- pass dev_priv to the credit wait helpers
- bikeshed credit helper names
- wait for *at least* the current maximum number of credits
- indentation fix
- add helpers for credits available
Signed-off-by: Madhav Chauhan <madhav.chauhan@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/84bc509beabf2a2d1324a9f2a67ab4ebe05b10a6.1540900289.git.jani.nikula@intel.com
Commit b24413180f ("License cleanup: add SPDX GPL-2.0 license
identifier to files with no license") added "SPDX-License-Identifier:
GPL-2.0" to files which previously had no license, change this to MIT
for intel_ringbuffer.h matching the license text of intel_ringbuffer.c.
Signed-off-by: Jonathan Gray <jsg@jsg.id.au>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181031005331.20775-1-jsg@jsg.id.au
GVT-g only simulates DP port for guest and leaves EDP_PSR_IMR
and EDP_PSR_IIR registers as default MMIO read/write.
So guest won't get expected initial values of these registers when
initializing the gpu driver, which results in following warning and logs.
--------
Interrupt register 0x64838 is not zero: 0xffffffff
WARNING: CPU: 1 PID: 157 at drivers/gpu/drm/i915/i915_irq.c:177
gen3_assert_iir_is_zero+0x38/0xa0
Call Trace:
gen8_de_irq_postinstall+0xa7/0x400
gen8_irq_postinstall+0x27/0x80
drm_irq_install+0xbc/0x140
i915_driver_load+0xa9d/0xd50
--------
Because GVT-g does not handle EDP(embedded DP) simulation for guests,
always set EDP_PSR_IMR and EDP_PSR_IIR to value 0.
Signed-off-by: Longhe Zheng <longhe.zheng@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
CSFE_CHICKEN1(0x20d4) needs access with mask. This is caught in AcrnGT
conformance check test:
[drm:intel_gvt_vgpu_conformance_check]
*ERROR* gvt: vgpu1 unconformance mmio 0x20d4:0x40004,0x4
Signed-off-by: Xinyun Liu <xinyun.liu@intel.com>
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Previously we assumed two 4-byte writes to the same PTE coming in sequence.
But recently we observed inconsecutive partial write happening as well. So
this patch enhances the previous solution. It now uses a list to save more
partial writes. If one partial write can be combined with another one in
the list to construct a full PTE, update its shadow entry. Otherwise, save
the partial write in the list.
v2: invalidate old entry and flush ggtt (Zhenyu)
v3: split old ggtt page unmap to another patch (Zhenyu)
v4: refine codes (Zhenyu)
Signed-off-by: Hang Yuan <hang.yuan@linux.intel.com>
Cc: Yan Zhao <yan.y.zhao@intel.com>
Cc: Xiaolin Zhang <xiaolin.zhang@intel.com>
Cc: Zhenyu Wang <zhenyu.z.wang@intel.com>
Reviewed-by: Xiaolin Zhang <xiaolin.zhang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
When using softpin it's not enough to just pad the vma size, we also
need to ensure the vma offset is at the start of the pt boundary, if we
plan to utilize 64K pages. Therefore to improve test coverage we should
use both aligned and unaligned gtt offsets in igt_write_huge.
Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20181029203734.21936-1-matthew.auld@intel.com
This reverts commit c9e666880d.
Checked GVT codes that guest PPGTT PTE flag bits are propagated
to shadow PTE. Read/write bit is not changed. Further tested by
i915 self-test case "igt_ctx_readonly". No error or GPU hang was
detected. So enable read-only support under GVT.
Signed-off-by: Hang Yuan <hang.yuan@linux.intel.com>
Acked-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1540883281-11359-1-git-send-email-hang.yuan@linux.intel.com
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
ICL supports DC5, DC6, and DC9. Enable DC9 during screen-off, and enable
DC5/6 when appropriate.
v2: (James Ausmus)
- Also handle ICL as GEN9_LP in i915_drm_suspend_late and
i915_drm_suspend_early
- Add DC9 to gen9_dc_mask for ICL
- Re-order GEN checks for newest platform first
- Use INTEL_GEN instead of INTEL_INFO->gen
- Use INTEL_GEN >= 11 instead of IS_ICELAKE
- Consolidate GEN checks
v3: (James Ausmus)
- Also allow DC6 for ICL (Imre, Art)
- Simplify !(GEN >= 11) to GEN < 11 (Imre)
v4: (James Ausmus)
- Don't call intel_power_sequencer_reset after DC9 for Gen11+, as the
PPS regs are Always On
- Rebase against upstream changes
v5: (Anusha Srivatsa)
- rebased against the latest upstream changes.
v6: (Anusha Srivatsa)
- rebased.Use INTEL_GEN consistently.
- Simplify the code (Rodrigo)
v7: rebased. Change order according to platforms(Jyoti)
v8: rebased. Change the check from platform specific to
HAS_PCH_SPLIT(). Add comment in code to be more clear.(Rodrigo)
Cc: Imre Deak <imre.deak@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Signed-off-by: James Ausmus <james.ausmus@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Tested-by: Jyoti Yadav <jyoti.r.yadav@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181029221410.4423-1-anusha.srivatsa@intel.com
If we reduce the suspend function for intel_opregion to do the minimum
required, the resume function can also do the simple task of notifier
the ACPI bios that we are back. This avoid some nasty restrictions on
the likes of register_acpi_notifier() that are not allowed during the
early phase of resume.
v2: Keep the order of acpi notify vs turning off ardy/drdy the same.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181030110554.4111-1-chris@chris-wilson.co.uk
If we can prevent stray writes from landing in the scratch page, we can
reuse the same page and same scratch PT for all contexts without fear of
information leaks and side-channels.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181029182721.29568-2-chris@chris-wilson.co.uk
Record the scratch PTE encoding upon creation rather than recomputing
the bits everytime. This is important for the next patch where we forgo
having a valid scratch page with which we may compute the bits and so
require keeping the PTE value instead.
v2: Fix up scrub_64K to use scratch_pte as well.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181029182721.29568-1-chris@chris-wilson.co.uk
intel_fb_pitch_limit() has the parameters pixel_format and fb_modifier
switched in their positions. The parameters are however used correctly,
but change the order for consistency.
Also use kernel data types for both parameters.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181026195342.16828-1-dhinakaran.pandiyan@intel.com
The PLANE_AUX_OFFSET mmio does not exist on ICL, do not program it. We'll
still calculate the aux offset as it is required for adjusing x-y offsets.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181026193805.11077-2-dhinakaran.pandiyan@intel.com
A framebuffer can comprise surfaces with distinct tiling formats,
making checks against modifier alone insufficient. Make use of a
function to identify a linear surface based on both modifier and color
plane.
v2: Typo fix
v3: remove 'inline' from function definition (Ville)
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181026193805.11077-1-dhinakaran.pandiyan@intel.com
The specially case for SKL for not controlled sagv
is already taken care inside intel_enable_sagv, so there's
no need to duplicate the check here.
v2: Go one step further and remove skl special case. (Jani)
v3: Separate runtime status handle from has_sagv flag.
v4: Go back and accept simple Jani proposed solution.
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181026200317.21726-1-rodrigo.vivi@intel.com
The vm of two contexts are supposed to be independent, such that a stray
write by one cannot be detected by another. Normally the GTT is filled
explicitly by userspace, but the space in between objects is filled with
a scratch page -- and that scratch page should not be able to form an
inter-context backchannel.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181029172925.10159-1-chris@chris-wilson.co.uk
While checking the opportunity to add a display_gen
check to allow glk and cnl to be on same bucket I noticed
these FIXME cases here.
So I got the confirmation from HW architect that we actually
never needed this workaround.
"GLK supports 2 pixel per clock, so pixel clock can be up to 2 * cdclk."
So, this reverts commit 97f55ca5b6 ("drm/i915/glk: limit pixel
clock to 99% of cdclk workaround")
Fixes: 97f55ca5b6 ("drm/i915/glk: limit pixel clock to 99% of cdclk workaround")
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Madhav Chauhan <madhav.chauhan@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Clinton Taylor <clinton.a.taylor@intel.com>
Cc: Arthur J Runyan <arthur.j.runyan@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181026005636.22274-1-rodrigo.vivi@intel.com
commit ac657f6461 ("drm/i915: Introduce IS_GEN macro") introduced
GEN_FOREVER that was never used.
My first attempt was to rename it to FOREVER since GEN is
already part of the macro. Then I used coccinelle to change all
-INTEL_GEN(e1) >= e2
+INTEL_GEN_RANGE(e1, e2, FOREVER)
-INTEL_GEN(e1) <= e2
+INTEL_GEN_RANGE(e1, 0, e2)
and I liked it.
However I didn't like very much the remaining
INTEL_GEN(dev_priv) < n
and:
INTEL_GEN(e1) < n
INTEL_GEN_RANGE(e1, 0, n - 1)
didn't make much sense either.
So INTEL_GEN use for > or < seems a better unified way for unlimited
bounds. So, no reason to keep GEN_FOREVER here.
Let's kill before someone start using it.
v2: Remove remaining GEN_FOREVER forgotten in a comment. (Daniel)
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20181026195143.20353-2-rodrigo.vivi@intel.com
Intel HDCP2.2 registers are defined with addr offsets and bit details.
v2:
Replaced the arith calc with _PICK [Sean Paul]
v3:
No changes.
v4:
%s/HDCP2_CTR_DDI/HDCP2_CTL_DDI [Uma]
v5:
Added parentheses for the parameters of macro.
v6:
No changes
v7:
No changes
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1540806351-7137-7-git-send-email-ramalingam.c@intel.com
Considering significant number of HDCP specific variables, it will
be clean to have separate struct for HDCP.
New structure called intel_hdcp is added within intel_connector.
v2:
struct hdcp statically allocated. [Sean Paul]
enable and disable function parameters are retained.[Sean Paul]
v3:
No Changes.
v4:
Commit msg is rephrased [Uma]
v5:
Comment for mutex definition.
v6:
hdcp_ prefix from all intel_hdcp members are removed [Sean Paul]
inline function intel_hdcp_to_connector is defined [Sean Paul]
v7:
%s/uint64_t/u64
v8:
Rebased
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1540806351-7137-2-git-send-email-ramalingam.c@intel.com
-----BEGIN PGP SIGNATURE-----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=3yxi
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2018-10-24' of git://anongit.freedesktop.org/drm/drm
Pull drm updates from Dave Airlie:
"This is going to rebuild more than drm as it adds a new helper to
list.h for doing bulk updates. Seemed like a reasonable addition to
me.
Otherwise the usual merge window stuff lots of i915 and amdgpu, not so
much nouveau, and piles of everything else.
Core:
- Adds a new list.h helper for doing bulk list updates for TTM.
- Don't leak fb address in smem_start to userspace (comes with EXPORT
workaround for people using mali out of tree hacks)
- udmabuf device to turn memfd regions into dma-buf
- Per-plane blend mode property
- ref/unref replacements with get/put
- fbdev conflicting framebuffers code cleaned up
- host-endian format variants
- panel orientation quirk for Acer One 10
bridge:
- TI SN65DSI86 chip support
vkms:
- GEM support.
- Cursor support
amdgpu:
- Merge amdkfd and amdgpu into one module
- CEC over DP AUX support
- Picasso APU support + VCN dynamic powergating
- Raven2 APU support
- Vega20 enablement + kfd support
- ACP powergating improvements
- ABGR/XBGR display support
- VCN jpeg support
- xGMI support
- DC i2c/aux cleanup
- Ycbcr 4:2:0 support
- GPUVM improvements
- Powerplay and powerplay endian fixes
- Display underflow fixes
vmwgfx:
- Move vmwgfx specific TTM code to vmwgfx
- Split out vmwgfx buffer/resource validation code
- Atomic operation rework
bochs:
- use more helpers
- format/byteorder improvements
qxl:
- use more helpers
i915:
- GGTT coherency getparam
- Turn off resource streamer API
- More Icelake enablement + DMC firmware
- Full PPGTT for Ivybridge, Haswell and Valleyview
- DDB distribution based on resolution
- Limited range DP display support
nouveau:
- CEC over DP AUX support
- Initial HDMI 2.0 support
virtio-gpu:
- vmap support for PRIME objects
tegra:
- Initial Tegra194 support
- DMA/IOMMU integration fixes
msm:
- a6xx perf improvements + clock prefix
- GPU preemption optimisations
- a6xx devfreq support
- cursor support
rockchip:
- PX30 support
- rgb output interface support
mediatek:
- HDMI output support on mt2701 and mt7623
rcar-du:
- Interlaced modes on Gen3
- LVDS on R8A77980
- D3 and E3 SoC support
hisilicon:
- misc fixes
mxsfb:
- runtime pm support
sun4i:
- R40 TCON support
- Allwinner A64 support
- R40 HDMI support
omapdrm:
- Driver rework changing display pipeline ordering to use common code
- DMM memory barrier and irq fixes
- Errata workarounds
exynos:
- out-bridge support for LVDS bridge driver
- Samsung 16x16 tiled format support
- Plane alpha and pixel blend mode support
tilcdc:
- suspend/resume update
mali-dp:
- misc updates"
* tag 'drm-next-2018-10-24' of git://anongit.freedesktop.org/drm/drm: (1382 commits)
firmware/dmc/icl: Add missing MODULE_FIRMWARE() for Icelake.
drm/i915/icl: Fix signal_levels
drm/i915/icl: Fix DDI/TC port clk_off bits
drm/i915/icl: create function to identify combophy port
drm/i915/gen9+: Fix initial readout for Y tiled framebuffers
drm/i915: Large page offsets for pread/pwrite
drm/i915/selftests: Disable shrinker across mmap-exhaustion
drm/i915/dp: Link train Fallback on eDP only if fallback link BW can fit panel's native mode
drm/i915: Fix intel_dp_mst_best_encoder()
drm/i915: Skip vcpi allocation for MSTB ports that are gone
drm/i915: Don't unset intel_connector->mst_port
drm/i915: Only reset seqno if actually idle
drm/i915: Use the correct crtc when sanitizing plane mapping
drm/i915: Restore vblank interrupts earlier
drm/i915: Check fb stride against plane max stride
drm/amdgpu/vcn:Fix uninitialized symbol error
drm: panel-orientation-quirks: Add quirk for Acer One 10 (S1003)
drm/amd/amdgpu: Fix debugfs error handling
drm/amdgpu: Update gc_9_0 golden settings.
drm/amd/powerplay: update PPtable with DC BTC and Tvr SocLimit fields
...
- Remove unused fallback for BUILD_BUG_ON (which technically contains a VLA)
- Lift -Wvla to the top-level Makefile
-----BEGIN PGP SIGNATURE-----
Comment: Kees Cook <kees@outflux.net>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=Vnw8
-----END PGP SIGNATURE-----
Merge tag 'vla-v4.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull VLA removal from Kees Cook:
"Globally warn on VLA use.
This turns on "-Wvla" globally now that the last few trees with their
VLA removals have landed (crypto, block, net, and powerpc).
Arnd mentioned that there may be a couple more VLAs hiding in
hard-to-find randconfigs, but nothing big has shaken out in the last
month or so in linux-next.
We should be basically VLA-free now! Wheee. :)
Summary:
- Remove unused fallback for BUILD_BUG_ON (which technically contains
a VLA)
- Lift -Wvla to the top-level Makefile"
* tag 'vla-v4.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
Makefile: Globally enable VLA warning
compiler.h: give up __compiletime_assert_fallback()
Pull XArray conversion from Matthew Wilcox:
"The XArray provides an improved interface to the radix tree data
structure, providing locking as part of the API, specifying GFP flags
at allocation time, eliminating preloading, less re-walking the tree,
more efficient iterations and not exposing RCU-protected pointers to
its users.
This patch set
1. Introduces the XArray implementation
2. Converts the pagecache to use it
3. Converts memremap to use it
The page cache is the most complex and important user of the radix
tree, so converting it was most important. Converting the memremap
code removes the only other user of the multiorder code, which allows
us to remove the radix tree code that supported it.
I have 40+ followup patches to convert many other users of the radix
tree over to the XArray, but I'd like to get this part in first. The
other conversions haven't been in linux-next and aren't suitable for
applying yet, but you can see them in the xarray-conv branch if you're
interested"
* 'xarray' of git://git.infradead.org/users/willy/linux-dax: (90 commits)
radix tree: Remove multiorder support
radix tree test: Convert multiorder tests to XArray
radix tree tests: Convert item_delete_rcu to XArray
radix tree tests: Convert item_kill_tree to XArray
radix tree tests: Move item_insert_order
radix tree test suite: Remove multiorder benchmarking
radix tree test suite: Remove __item_insert
memremap: Convert to XArray
xarray: Add range store functionality
xarray: Move multiorder_check to in-kernel tests
xarray: Move multiorder_shrink to kernel tests
xarray: Move multiorder account test in-kernel
radix tree test suite: Convert iteration test to XArray
radix tree test suite: Convert tag_tagged_items to XArray
radix tree: Remove radix_tree_clear_tags
radix tree: Remove radix_tree_maybe_preload_order
radix tree: Remove split/join code
radix tree: Remove radix_tree_update_node_t
page cache: Finish XArray conversion
dax: Convert page fault handlers to XArray
...
HDMI 2.0 monitors may not support SCDC and still be able to accept VICs
above 63. Use multiple EDID capbilities to determine if the SINK is
actually an HDMI 2.0 device. The QD980B HDMI 2.0 Analyzer generates unique
EDIDs during CTS tests that don't contain a HDMI Forum VSDB if the block is
not used during the test. The current HDMI AVI infoframe code only uses the
SCDC supported information in the HDMI Forum VSDB to determine if the sink
is HDMI 2.0. This patch adds a check for YCbCr420 present in the EDID
supported formats as well as the existing SCDC supported check.
HDMI 2.0 CTS HF1-51 test fails on the QD980B.
V2: Make check for display_info->color formats == YCbCR420 and SCDC
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107894
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: Clint Taylor <clinton.a.taylor@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1540415073-5102-1-git-send-email-clinton.a.taylor@intel.com
Use the live_test struct to record the reset count before and compare it
at the end of the test to assert that no mystery hang occurred during the
test.
v2: Check per-engine resets as well
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181012122404.10874-1-chris@chris-wilson.co.uk
Upcoming GuC code will need to read the fused off engine masks as well,
and will also want to have them as enabled instead of disabled masks.
To consolidate the read-out place we can store them in this fashion inside
INTEL_INFO so they can be easily referenced in the future.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181018104106.30147-1-tvrtko.ursulin@linux.intel.com
In order to ensure that our system suspend and resume callbacks are
called in the correct order wrt. those of the HDA driver add a device
link to the HDA driver during audio component binding time. With i915 as
the supplier and HDA as the consumer the PM framework will guarantee
the HDA->i915 suspend (and shutdown) and i915->HDA resume order.
Atm, the lack of this ordering is not a problem, since all the i915
suspend/resume steps that need to be ordered wrt. the HDA driver's
suspend/resume steps are separated out to the i915
suspend_late/resume_early hooks. That will change in a follow-up
patchset where we'll need this ordering guarantee for steps that are in
the i915 suspend/resume hooks (and which can't be moved to
suspend_late/resume_early for other reasons). So this patch is a
preparation for that follow-up patchset.
The change also allows us to move towards removing the i915
suspend_late/resume_early hooks alltogether.
Since we only need to ensure the ordering during suspend/resume and not
during driver probing create the link with DL_FLAG_STATELESS. Since the
probe time ordering has to be optional we use the component framework
for that.
Similarly for runtime PM we depend on the audio driver getting/putting
an i915 runtime PM reference whenever it needs it (along with the proper
i915 display power domain) via the audio component ops get_power /
put_power hooks. So we create the device link without
DL_FLAG_PM_RUNTIME.
v2: (Ville)
- Add a note to the commit message about not using the device link
runtime PM ordering.
- Handle the error return from device_link_add().
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181023144310.8272-1-imre.deak@intel.com
Let's support simultaneous submissions to multiple engines.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Link: https://patchwork.kernel.org/patch/10626149/
4.19 is out, Lyude asked for a backmerge, and it's been a while. All
very good reasons on their own :-)
Signed-off-by: Sean Paul <seanpaul@chromium.org>
make W=1 caught the implicit prototypes (as would sparse):
drivers/gpu/drm/i915/intel_sprite.c:462:1: error: no previous prototype for ‘skl_update_plane’ [-Werror=missing-prototypes]
skl_update_plane(struct intel_plane *plane,
^~~~~~~~~~~~~~~~
drivers/gpu/drm/i915/intel_sprite.c:487:1: error: no previous prototype for ‘skl_disable_plane’ [-Werror=missing-prototypes]
skl_disable_plane(struct intel_plane *plane, struct intel_crtc *crtc)
^~~~~~~~~~~~~~~~~
Fixes: 1e364f9008 ("drm/i915/gen11: Program the Y and UV plane for planar mode correctly, v3.")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181024105402.18915-1-chris@chris-wilson.co.uk
Forgot to add the description of this option in a previous commit.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Fixes: cd956bfcd0 ("drm/i915/perf: add a parameter to control the size of OA buffer")
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20181024105158.4732-1-lionel.g.landwerlin@intel.com
The 16Gb DIMM w/a is not applicable to BXT or GLK. Limit it to
the appropriate platforms.
This was especially harsh on GLK since we don't even try to read
the DIMM information on that platforms, hence valid_dimm was
always false and thus we always tried to apply the w/a.
Furthermore the w/a pushed the level 0 latency above the
level 1 latency, which doesn't really make sense.
v2: Do the check when populating is_16gb_dimm (Mahesh)
Cc: Mahesh Kumar <mahesh1.kumar@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Fixes: 86b592876c ("drm/i915: Implement 16GB dimm wa for latency level-0")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181023182102.31549-1-ville.syrjala@linux.intel.com
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Mahesh Kumar <mahesh1.sh.kumar@gmail.com>
Commit '3cf71bc9904d ("drm/i915: Re-apply "Perform link quality check,
unconditionally during long pulse"")' applies a work around for sinks
that don't signal link loss. The work around does not need to have to be
that broad as the issue was seen with only one particular monitor; limit
this only for external displays as eDP features like PSR turn off the link
and the driver ends up retraining the link seeeing that link is not
synchronized.
Cc: Lyude Paul <lyude@redhat.com>
Cc: Jan-Marek Glogowski <glogow@fbihome.de>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
References: 3cf71bc990 ("drm/i915: Re-apply "Perform link quality check, unconditionally during long pulse"")
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180927205735.16651-2-dhinakaran.pandiyan@intel.com
(cherry picked from commit f24f6eb958)
Fixes: 399334708b ("drm/i915: Re-apply "Perform link quality check, unconditionally during long pulse"")
Cc: stable@vger.kernel.org
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Comment claims link needs to be retrained because the connected sink raised
a long pulse to indicate link loss. If the sink did so,
intel_dp_hotplug() would have handled link retraining. Looking at the
logs in Bugzilla referenced in commit '3cf71bc9904d ("drm/i915: Re-apply
Perform link quality check, unconditionally during long pulse"")', the
issue is that the sink does not trigger an interrupt. What we want is
->detect() from user space to check link status and retrain. Ville's
review for the original patch also indicates the same root cause. So,
rewrite the comment.
v2: Patch split and rewrote comment.
Cc: Lyude Paul <lyude@redhat.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Jan-Marek Glogowski <glogow@fbihome.de>
References: 3cf71bc990 ("drm/i915: Re-apply "Perform link quality check, unconditionally during long pulse"")
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180927205735.16651-1-dhinakaran.pandiyan@intel.com
(cherry picked from commit 9ebd820239)
Fixes: 399334708b ("drm/i915: Re-apply "Perform link quality check, unconditionally during long pulse"")
Cc: stable@vger.kernel.org
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Now that we implemented support for planar formats on gen11, we can
finally advertise it.
Changes since v1:
- Re-add change to skl_plane_has_planar(), was lost in rebase noise.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181022134514.14756-1-maarten.lankhorst@linux.intel.com
The UV plane is the master plane that does all color correction etc.
It needs to be programmed with the dimensions for color plane 1 (UV).
The Y plane just feeds the Y pixels to it. Program the scaler from the
master only, and set PLANE_CTL_YUV420_Y_PLANE on the slave plane.
Changes since v1:
- Make a common skl_program_plane, and use it for both plane updates.
Changes since v2:
- Make color_plane explicit, to clarify skl_update_plane(). (Ville)
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181018115134.9061-8-maarten.lankhorst@linux.intel.com
We configure the chroma upsampler with the same chroma siting as
used by the scaler for consistency, the chroma upsampler is used
instead of the scaler for YUV 4:2:0 on ICL's HDR planes.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181018115134.9061-7-maarten.lankhorst@linux.intel.com
The first 3 planes (primary, sprite 0 and 1) have a dedicated chroma
upsampler to upscale YUV420 to YUV444 and the scaler should only be
used for upscaling. Because of this we shouldn't program the scalers
in planar mode if NV12 and the chroma upsampler are used. Instead
program the scalers like on normal planes.
Sprite 2 and 3 have no dedicated scaler, and need to program the
selected Y plane in the scaler mode.
Changes since v1:
- Make the comment less confusing.
Changes since v2:
- Fix checkpatch warning (Matt)
- gen10- -> Pre-gen11 (Ville)
- PS_SCALER_MODE_PACKED -> PS_SCALER_MODE_NORMAL. (Matt)
- Add comment about scaler mode in intel_atomic_setup_scaler(). (Matt)
- Rename need_scaling to need_scaler. (Matt)
- Move the crtc need_scaling check to skl_update_scaler_crtc().
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181018115134.9061-6-maarten.lankhorst@linux.intel.com
Skylake style watermarks program the UV parameters into wm->uv_wm,
and have a separate DDB allocation for UV blocks into the same plane.
Gen11 watermarks have a separate plane for Y and UV, with separate
mechanisms. The simplest way to make it work is to keep the current
way of programming watermarks and calculate the Y and UV plane
watermarks from the master plane.
Changes since v1:
- Constify crtc_state where possible.
- Make separate paths for planar formats in skl_build_pipe_wm() (Matt)
- Make separate paths for calculating total data rate. (Matt)
- Make sure UV watermarks are unused on gen11+ by adding a WARN. (Matt)
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181018115134.9061-5-maarten.lankhorst@linux.intel.com
To make NV12 working on icl, we need to update 2 planes simultaneously.
I've chosen to do this in the CRTC step after plane validation is done,
so we know what planes are (in)visible. The linked Y plane will get
updated in intel_plane_update_planes_on_crtc(), by the call to
update_slave, which gets the master's plane_state as argument.
The link requires both planes for atomic_update to work,
so make sure skl_ddb_add_affected_planes() adds both states.
Changes since v1:
- Introduce icl_is_nv12_y_plane(), instead of hardcoding sprite numbers.
- Put all the state updating login in intel_plane_atomic_check_with_state().
- Clean up changes in intel_plane_atomic_check().
Changes since v2:
- Fix intel_atomic_get_old_plane_state() to actually return old state.
- Move visibility changes to preparation patch.
- Only try to find a Y plane on gen11, earlier platforms only require
a single plane.
Changes since v3:
- Fix checkpatch warning about to_intel_crtc() usage.
- Add affected planes from icl_add_linked_planes() before check_planes(),
it's a cleaner way to do this. (Ville)
Changes since v4:
- Clear plane links in icl_check_nv12_planes() for clarity.
- Only pass crtc_state to icl_check_nv12_planes().
- Use for_each_new_intel_plane_in_state() in icl_check_nv12_planes.
- Rename aux to linked. (Ville)
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181022135152.15324-1-maarten.lankhorst@linux.intel.com
[mlankhorst: Change bool slave to u32, to satisfy checkpatch]
[mlankhorst: Add WARN_ON's based on Ville's suggestion]
When a HDCP authentication is in progress, if the display sink is
hot unplugged, all DDC/AUX transaction related to the HDCP
authentication will fail.
This patch moves those kind of HDCP DDC/AUX failures into the debug
logs instead of errors.
v2:
Bksv invalid state is provided as debug msg
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1540291288-22185-1-git-send-email-ramalingam.c@intel.com
Add a debugfs entry for providing the hdcp capabilities of the sink
connected to the HDCP capable connectors.
v2:
Squashed the sink's hdcp capability into this patch. [Daniel]
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1540286550-20399-4-git-send-email-ramalingam.c@intel.com
HDCP check link is invoked only on CP_IRQ detection, instead of all
short pulses.
v3:
No Changes.
v4:
Added sean in cc and collected the reviewed-by received.
v5:
No Change.
v6:
No Change.
v7:
No Change.
v8:
Rebased.
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
cc: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1540286550-20399-3-git-send-email-ramalingam.c@intel.com
For reusability purpose, this patch implements the hdcp1.4 bksv's
read and validation as a functions.
For detecting the HDMI panel's HDCP capability this fucntions will be
used.
v2:
Rebased.
v3:
No Changes.
v4:
inline tag is removed with modified error msg.
v5:
No Changes.
v6:
No Changes.
v7:
Realigned the code.
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1540286550-20399-2-git-send-email-ramalingam.c@intel.com
Propagate the timeout on transferring the fw back to the caller where it
may act upon it, usually by restarting the xfer before failing.
v2: Simplify the wait to only wait upon the guc signaling completion,
with an assertion that the fw xfer must have completed for it to be
ready!
Testcase: igt/drv_selftest/live_hangcheck
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181018195536.11522-1-chris@chris-wilson.co.uk
Let's run through the entire plane check even when the plane
is invisible due to zero constant alpha. This makes for more
consistent behaviour since we check the src/dst coordinates,
stride etc. against the hardware limits.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181018195921.9898-2-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
The SKL+ NV12 src width alignment w/a is still living in an odd place.
Everything else was already relocated closer to the main plane check
function. Move this workaround as well.
As a bonus we avoid the funky rotated vs. not mess with the src
coordinates as this now gets checked before we rotate the coordinates.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181018195921.9898-1-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
The way our hardware is designed doesn't seem to let us use the
MI_RECORD_PERF_COUNT command without setting up a circular buffer.
In the case where the user didn't request OA reports to be available
through the i915 perf stream, we can set the OA buffer to the minimum
size to avoid consuming memory which won't be used by the driver.
v2: Simplify oa buffer size exponent selection (Chris)
Reuse vma size field (Lionel)
v3: Restrict size opening parameter to values supported by HW (Chris)
v4: Drop out of date comment (Matt)
Add debug message when buffer size is rejected (Matt)
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181023100707.31738-5-lionel.g.landwerlin@intel.com
We initialize the OA buffer everytime we enable the OA unit (first call in
gen[78]_oa_enable), so we don't need to initialize when preparing the metric
set.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181023100707.31738-3-lionel.g.landwerlin@intel.com
commit e346a991f4 ("drm/i915/guc: drop negative doorbell alloc
selftest") removed the negative case from the selftest and left no
code between the goto from the positive case of the test and the label
itself, so we can get rid of it.
Reported-by: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20181022230427.5616-5-daniele.ceraolospurio@intel.com
We stopped supporting fallback to execlists in commit 121981fafe
(drm/i915/guc: Combine enable_guc_loading|submission modparams). We
do instead reset and retry in some cases, depending on the workarounds
required by the platform.
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20181022230427.5616-4-daniele.ceraolospurio@intel.com
A collection of very small cleanups/improvements around doorbell checking
that do not deserve their own patch:
- Move doorbell-related HW defs to intel_guc_reg.h
- use GUC_NUM_DOORBELLS instead of GUC_DOORBELL_INVALID where
appropriate
- do not stop on error in guc_verify_doorbells
- do not print drbreg on error: the only content of the register
apart from the valid bit is the lower part of the physical memory
address, which we can't use even if valid because we don't know
which descriptor it came from (since the doorbell is in an unexpected
state)
- Move the checking of doorbell valid bit to a common helper.
v2: add more cleanups (move defs, use GUC_NUM_DOORBELLS, don't stop in
guc_verify_doorbells) (Michal)
v3: move more things to intel_guc_reg, redefine
GUC_DOORBELL_INVALID (Michal), drop guc_doorbell_qw since it just
duplicates guc_doorbell_info
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20181022230427.5616-3-daniele.ceraolospurio@intel.com
Cacheline selection is only needed if we actually manage to reserve a
doorbell.
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20181022230427.5616-2-daniele.ceraolospurio@intel.com
The 2 functions don't create or destroy anything, they just update the
doorbell state in memory. Use init and fini instead for clarity.
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20181022230427.5616-1-daniele.ceraolospurio@intel.com
Just sorting this "if" block from newer to older platform.
The main difference here is the addition of a
missing case with return false that should never occur.
And if it occurs it is better than to raise a warn
than use the icl one.
The gen >= 11 was already present in the previous logic,
although hidden.
So, in summary no real functional change.
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181022171526.15641-3-rodrigo.vivi@intel.com
No functional change.
Just sorting this "if" block from newer to older platform.
v2: Invert gen9_bc and gen9_lp (Ville)
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181022171526.15641-1-rodrigo.vivi@intel.com
This patch defines TRANS_CONF registers for DSI ports
0 and 1. Bitfields of these registers used for enabling
and reading the current state of transcoder.
v2: Add blank line before comment
v3 by Jani:
- Move DSI specific .pipe_offsets to GEN11_FEATURES
- Macro placement and comment juggling
Signed-off-by: Madhav Chauhan <madhav.chauhan@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/3aa11e41ea0d4eb434423cc5ddf0a63b19d54deb.1539613303.git.jani.nikula@intel.com
As part of DSI enable sequence, transcoder timings
(horizontal & vertical) need to be set so that transcoder
will generate the stream output as per those timings.
This patch set required transcoder timings as per BSPEC.
v2: Remove TRANS_TIMING_SHIFT usage
v3 by Jani:
- Rebase
- Reduce temp variable use
- Checkpatch fix
Signed-off-by: Madhav Chauhan <madhav.chauhan@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/525949ae4e919a4f2b807d606234322534656048.1539613303.git.jani.nikula@intel.com
This patch defines TRANS_DDI_FUNC_CTL and TRANS_DDI_FUNC_CTL2
registers and their bitfields for DSI. These registers are used
for enabling port sync mode, input pipe select, data lane width
configuration etc.
v2: Changes:
- Remove redundant extra line
- Correct some of bitfield definition
v3 by Jani:
- Move DSI transcoder offsets to GEN11_FEATURES
Signed-off-by: Madhav Chauhan <madhav.chauhan@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/6b2d87db82660320be10e423742cbf5a31e18037.1539613303.git.jani.nikula@intel.com
We wrongly assumed that GuC is only using last scratch register
for G2H messages, but in fact it is also using register [14] to
report sleep state status. Remove that register from our H2G
send registers pool.
v2: No message from host to GuC uses more than 8 registers and
the GuC FW itself uses an 8-element array to store the H2G message,
so we may reduce our send array to just 8 registers (Daniele)
v3: use explicit define (Daniele)
v4: and explicit comment (Daniele)
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20181019101725.14024-1-michal.wajdeczko@intel.com
This patch programs DSI operation mode, pixel format,
BGR info, link calibration etc for the DSI transcoder.
This patch also extract BGR info of the DSI panel from
VBT and save it inside struct intel_dsi which used for
configuring DSI transcoder.
v2: Rebase
v3: Use newly defined bitfields.
v4 by Jani:
- Use intel_dsi_bitrate()
- Make bgr_enabled bool
- Use 0 instead of 0x0
- Replace DRM_ERROR() with MISSING_CASE() on pixel format and video mode
- Use is_vid_mode()
Signed-off-by: Madhav Chauhan <madhav.chauhan@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/7de4e39a4b2a18e53a2b9d9cea5b5b4c9d6eeb34.1539613303.git.jani.nikula@intel.com
This patch defines transcoder function configuration
registers and its bitfields for both DSI ports.
Used while programming/enabling DSI transcoder.
v2: Changes (Jani N)
- Define _SHIFT and _MASK for bitfields
- Define values for fields already shifted in place
v3 by Jani:
- Fix _SHIFT fields copy-pasted from _MASK
- Indentation fixes
- Reduce S3D orientation to single macro
- Wrap a macro parameter in parens
Signed-off-by: Madhav Chauhan <madhav.chauhan@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/f188d3e59f27cbcac87d331af3d0222249db7fe4.1539613303.git.jani.nikula@intel.com
This patch programs D-PHY timing parameters for the
bus turn around flow(in escape clocks) only if dsi link
frequency <=800 MHz using DPHY_TA_TIMING_PARAM and its
identical register DSI_TA_TIMING_PARAM (inside DSI
Controller within the Display Core).
v2: Changes
- Don't use KHz() macro (Ville/Jani N)
- Use newly defined bitfields
v3 by Jani:
- Use intel_dsi_bitrate() in favor of a new field
- Remove redundant parens
Signed-off-by: Madhav Chauhan <madhav.chauhan@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/2c777092a748dfc973714399d8c19ed7a8c31a10.1539613303.git.jani.nikula@intel.com
This patch programs D-PHY timing parameters for the
clock and data lane (in escape clocks) of DSI
controller (DSI port 0 and 1).
These programmed timings would be used by DSI Controller
to calculate link transition latencies of the data and
clock lanes.
v2: Use newly defined bitfields for data and clock lane
v3 by Jani:
- Rebase on dphy abstraction
- Reduce local variables
- Remove unrelated comment changes (Ville)
- Use the same style for range checks as VLV (Ville)
- Assign, don't OR dphy_reg contents
Signed-off-by: Madhav Chauhan <madhav.chauhan@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/70d491e2357f328a63b67ea3c43cb57a1d469c15.1539613303.git.jani.nikula@intel.com
Currently the guest couldn't boot up under GVT-g environment as the
following call trace exists:
[ 272.504762] BUG: unable to handle kernel NULL pointer dereference at 0000000000000100
[ 272.504834] Call Trace:
[ 272.504852] execlists_context_pin+0x2b2/0x520 [i915]
[ 272.504869] intel_gvt_scan_and_shadow_workload+0x50/0x4d0 [i915]
[ 272.504887] intel_vgpu_create_workload+0x3e2/0x570 [i915]
[ 272.504901] intel_vgpu_submit_execlist+0xc0/0x2a0 [i915]
[ 272.504916] elsp_mmio_write+0xc7/0x130 [i915]
[ 272.504930] intel_vgpu_mmio_reg_rw+0x24a/0x4c0 [i915]
[ 272.504944] intel_vgpu_emulate_mmio_write+0xac/0x240 [i915]
[ 272.504947] intel_vgpu_rw+0x22d/0x270 [kvmgt]
[ 272.504949] intel_vgpu_write+0x164/0x1f0 [kvmgt]
GVT GEM context is created by i915_gem_context_create_gvt() which
doesn't allocate ppgtt. So GVT GEM context structure doesn't have
a valid i915_hw_ppgtt.
This patch create ppgtt table at GVT GEM context creation, then assign
shadow ppgtt's root table address to this ppgtt when shadow ppgtt will
be used on GPU. So GVT GEM context has valid ppgtt address. But note
that this ppgtt only contain valid ppgtt root table address, the table
entry in this ppgtt structure are invalid.
Fixes:4a3d3f6785be("drm/i915: Match code to comment and enforce ppgtt for execlists")
Signed-off-by: Xiong Zhang <xiong.y.zhang@intel.com>
Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/1539841231-3157-1-git-send-email-xiong.y.zhang@intel.com
Unfortunately, it appears our fix in:
commit b5d29843d8 ("drm/atomic_helper: Allow DPMS On<->Off changes
for unregistered connectors")
Which attempted to work around the problems introduced by:
commit 4d80273976 ("drm/atomic_helper: Disallow new modesets on
unregistered connectors")
Is still not the right solution, as modesets can still be triggered
outside of drm_atomic_set_crtc_for_connector().
So in order to fix this, while still being careful that we don't break
modesets that a driver may perform before being registered with
userspace, we replace connector->registered with a tristate member,
connector->registration_state. This allows us to keep track of whether
or not a connector is still initializing and hasn't been exposed to
userspace, is currently registered and exposed to userspace, or has been
legitimately removed from the system after having once been present.
Using this info, we can prevent userspace from performing new modesets
on unregistered connectors while still allowing the driver to perform
modesets on unregistered connectors before the driver has finished being
registered.
Changes since v1:
- Fix WARN_ON() in drm_connector_cleanup() that CI caught with this
patchset in igt@drv_module_reload@basic-reload-inject and
igt@drv_module_reload@basic-reload by checking if the connector is
registered instead of unregistered, as calling drm_connector_cleanup()
on a connector that hasn't been registered with userspace yet should
stay valid.
- Remove unregistered_connector_check(), and just go back to what we
were doing before in commit 4d80273976 ("drm/atomic_helper: Disallow
new modesets on unregistered connectors") except replacing
READ_ONCE(connector->registered) with drm_connector_is_unregistered().
This gets rid of the behavior of allowing DPMS On<->Off, but that should
be fine as it's more consistent with the UAPI we had before - danvet
- s/drm_connector_unregistered/drm_connector_is_unregistered/ - danvet
- Update documentation, fix some typos.
Fixes: b5d29843d8 ("drm/atomic_helper: Allow DPMS On<->Off changes for unregistered connectors")
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: stable@vger.kernel.org
Cc: David Airlie <airlied@linux.ie>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20181016203946.9601-1-lyude@redhat.com
(cherry picked from commit 39b50c6038)
Fixes: e96550956f ("drm/atomic_helper: Disallow new modesets on unregistered connectors")
Fixes: 34ca26a98a ("drm/atomic_helper: Allow DPMS On<->Off changes for unregistered connectors")
Cc: stable@vger.kernel.org
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Replace the kvmalloc_array() with i915_gem_object_get_dma_address() when
populating rotated vmas. One random access mechanism ought to be enough
for everyone?
To calculate the size of the radix tree I think we can do
something like this (assuming 64bit pointers):
num_pages = obj_size / 4096
tree_height = ceil(log64(num_pages))
num_nodes = sum(64^n, n, 0, tree_height-1)
tree_size = num_nodes * 576
If we compare that with the object size we should get a relative
overhead of around .2% to 1% for reasonable sized objects,
which framebuffers tend to be.
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181016150413.11577-1-ville.syrjala@linux.intel.com
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Use single exit point to drop rpm wakeref in case of an error.
Fixes: 9d3eb2c33f ("drm/i915: Hold rpm wakeref for debugfs/i915_drop_caches_set")
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20181018092025.24076-1-joonas.lahtinen@linux.intel.com
The test requires driver tweaks to avoid causing error messages
on intentionally-triggered errors and to stop accessing non
existing register. However, this is a pure GuC FW interface test
and should be covered by FW validation, so it isn't really worth
tweaking the driver for it and we're better off dropping it instead.
Testing the driver running out of doorbells is already covered by
igt_guc_doorbells
Suggested-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20181018004610.22895-1-daniele.ceraolospurio@intel.com
intel_dsi_vbt_init() has grown too unwieldy, and it's about to be
modified due to ICL DSI. Abstract out the VLV specific dphy param
init. No functional changes. Intentionally no stylistic changes during
code movement.
Cc: Madhav Chauhan <madhav.chauhan@intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Reviewed-by: Madhav Chauhan <madhav.chauhan@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/96d15760db027a137f298ec330520ef8ec6474b0.1539613303.git.jani.nikula@intel.com
Encoders are not alike, make enable and disable hooks optional like
other hooks. Utilize this in DSI code, and remove the silly nop hook.
v2: Add the check also to intel_sanitize_encoder() (Madhav)
Reviewed-by: Madhav Chauhan <madhav.chauhan@intel.com>
Acked-by: Ville Syrjala <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181016124134.10257-1-jani.nikula@intel.com
This patch is for VK_KHR_timeline_semaphore extension, semaphore is called syncobj in kernel side:
This extension introduces a new type of syncobj that has an integer payload
identifying a point in a timeline. Such timeline syncobjs support the
following operations:
* CPU query - A host operation that allows querying the payload of the
timeline syncobj.
* CPU wait - A host operation that allows a blocking wait for a
timeline syncobj to reach a specified value.
* Device wait - A device operation that allows waiting for a
timeline syncobj to reach a specified value.
* Device signal - A device operation that allows advancing the
timeline syncobj to a specified value.
v1:
Since it's a timeline, that means the front time point(PT) always is signaled before the late PT.
a. signal PT design:
Signal PT fence N depends on PT[N-1] fence and signal opertion fence, when PT[N] fence is signaled,
the timeline will increase to value of PT[N].
b. wait PT design:
Wait PT fence is signaled by reaching timeline point value, when timeline is increasing, will compare
wait PTs value with new timeline value, if PT value is lower than timeline value, then wait PT will be
signaled, otherwise keep in list. syncobj wait operation can wait on any point of timeline,
so need a RB tree to order them. And wait PT could ahead of signal PT, we need a sumission fence to
perform that.
v2:
1. remove unused DRM_SYNCOBJ_CREATE_TYPE_NORMAL. (Christian)
2. move unexposed denitions to .c file. (Daniel Vetter)
3. split up the change to drm_syncobj_find_fence() in a separate patch. (Christian)
4. split up the change to drm_syncobj_replace_fence() in a separate patch.
5. drop the submission_fence implementation and instead use wait_event() for that. (Christian)
6. WARN_ON(point != 0) for NORMAL type syncobj case. (Daniel Vetter)
v3:
1. replace normal syncobj with timeline implemenation. (Vetter and Christian)
a. normal syncobj signal op will create a signal PT to tail of signal pt list.
b. normal syncobj wait op will create a wait pt with last signal point, and this wait PT is only signaled by related signal point PT.
2. many bug fix and clean up
3. stub fence moving is moved to other patch.
v4：
1. fix RB tree loop with while(node=rb_first(...)). (Christian)
2. fix syncobj lifecycle. (Christian)
3. only enable_signaling when there is wait_pt. (Christian)
4. fix timeline path issues.
5. write a timeline test in libdrm
v5: (Christian)
1. semaphore is called syncobj in kernel side.
2. don't need 'timeline' characters in some function name.
3. keep syncobj cb.
v6: (Christian)
1. merge syncobj_timeline to syncobj structure.
2. simplify some check sentences.
3. some misc change.
4. fix CTS failed issue.
v7: (Christian)
1. error handling when creating signal pt.
2. remove timeline naming in func.
3. export flags in find_fence.
4. allow reset timeline.
v8:
1. use wait_event_interruptible without timeout
2. rename _TYPE_INDIVIDUAL to _TYPE_BINARY
v9:
1. rename signal_pt->base to signal_pt->fence_array to avoid misleading
2. improve kerneldoc
individual syncobj is tested by ./deqp-vk -n dEQP-VK*semaphore*
timeline syncobj is tested by ./amdgpu_test -s 9
Signed-off-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Cc: Christian Konig <christian.koenig@amd.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Daniel Rakos <Daniel.Rakos@amd.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Christian König <christian.koenig@amd.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/257258/
In response for I915_PARAM_HAS_HUC we are returning value that
indicates if HuC firmware was loaded and verified. However, our
previously used positive value was based on specific register bit
which is about to change on future platform. Let's normalize our
return values to 0 and 1 before clients will start to use Gen9 value.
v2: use bool for implicit conversion (Chris)
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Michal Winiarski <michal.winiarski@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Haihao Xiang <haihao.xiang@intel.com>
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com> #1
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20181017195245.39644-1-michal.wajdeczko@intel.com
GEM_WARN_ON currently has dangerous semantics where it is completely
compiled out on !GEM_DEBUG builds. This can leave users who expect it to
be more like a WARN_ON, just without a warning in non-debug builds, in
complete ignorance.
Another gotcha with it is that it cannot be used as a statement. Which is
again different from a standard kernel WARN_ON.
This patch fixes both problems by making it behave as one would expect.
It can now be used both as an expression and as statement, and also the
condition evaluates properly in all builds - code under the conditional
will therefore not unexpectedly disappear.
To satisfy call sites which really want the code under the conditional to
completely disappear, we add GEM_DEBUG_WARN_ON and convert some of the
callers to it. This one can also be used as both expression and statement.
>From the above it follows GEM_DEBUG_WARN_ON should be used in situations
where we are certain the condition will be hit during development, but at
a place in code where error can be handled to the benefit of not crashing
the machine.
GEM_WARN_ON on the other hand should be used where condition may happen in
production and we just want to distinguish the level of debugging output
emitted between the production and debug build.
v2:
* Dropped BUG_ON hunk.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Tomasz Lis <tomasz.lis@intel.com>
Reviewed-by: Tomasz Lis <tomasz.lis@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181012063142.16080-1-tvrtko.ursulin@linux.intel.com
Since when it was introduced we forgot to add
this case so ICL was using a wrong signal_levels
as reference.
Fixes: fb5c8e9d43 ("drm/i915/icl: Implement voltage swing programming sequence for Combo PHY DDI")
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181017215652.26841-1-rodrigo.vivi@intel.com
(cherry picked from commit 61cdfb9e19)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
DDI/TC clock-off bits are not equally distanced. TC1-3 bits are
from offset 12 & TC4 is at offset 21.
Create a function to choose correct clk-off bit.
v2: Add fixes tag (Lucas)
Fixes: c27e917e2b ("drm/i915/icl: add basic support for the ICL clocks")
Signed-off-by: Mahesh Kumar <mahesh1.kumar@intel.com>
Signed-off-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181016023752.9285-1-lucas.demarchi@intel.com
(cherry picked from commit bb1c7edc6d)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
This patch creates a function/wrapper to check if port is combophy port
instead of explicitly comparing ports.
Changes since V1:
- keep all intel_port_is_* helper together (Lucas)
Signed-off-by: Mahesh Kumar <mahesh1.kumar@intel.com>
Cc: Madhav Chauhan <madhav.chauhan@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181004085043.10154-1-mahesh1.kumar@intel.com
(cherry picked from commit 176597a12d)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
If BIOS configured a Y tiled FB we failed to set up the backing object
tiling accordingly, leading to a lack of GT fence installed and a
garbled console.
The problem was bisected to
commit 011f22eb54 ("drm/i915: Do NOT skip the first 4k of stolen memory for pre-allocated buffers v2")
but it just revealed a pre-existing issue.
Kudos to Ville who suspected a missing fence looking at the corruption
on the screen.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: <ronald@innovation.ch>
Cc: <stable@vger.kernel.org>
Reported-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reported-by: <ronald@innovation.ch>
Tested-by: <ronald@innovation.ch>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108264
Fixes: bc8d7dffac ("drm/i915/skl: Provide a Skylake version of get_plane_config()")
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181016160011.28347-1-imre.deak@intel.com
(cherry picked from commit 914a4fd8cd)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
For mmap-exhaustion, we deliberately put the system under a large amount
of pressure to ensure that we are able to reap mmap-offsets from dead
objects. If background activity does that reaping for us, that defeats
the purpose of the test and in some cases will fail our sanity checks
(because of the fake activity we use to prevent the idle worker).
Fixes: 932cac10c8 ("drm/i915/selftests: Prevent background reaping of acti
ve objects")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181011103748.18387-1-chris@chris-wilson.co.uk
(cherry picked from commit 0b4bf7ca9b)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
This patch fixes the original commit c0cfb10d9e ("drm/i915/edp:
Do not do link training fallback or prune modes on EDP") that causes
a blank screen in case of certain eDP panels (Eg: seen on Dell XPS13 9350)
where first link training fails and a retraining is required by falling
back to lower link rate/lane count.
In case of some panels they advertise higher link rate/lane count
than whats required for supporting the panel's native mode.
But we always link train at highest link rate/lane count for eDP
and if that fails we can still fallback to lower link rate/lane count
as long as the fallback link BW still fits the native mode to avoid
pruning the panel's native mode yet retraining at fallback values
to recover from a blank screen.
v3:
* Add const for fixed_mode (Ville)
v2:
* Send uevent if link failure on eDP unconditionally
Fixes: c0cfb10d9e ("drm/i915/edp: Do not do link training fallback or prune modes on EDP")
Cc: Clinton Taylor <clinton.a.taylor@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: <stable@vger.kernel.org> # v4.17+
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107489
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105338
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Tested-by: Alexander Wilson <alexander.wilson@ncf.edu>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181009212804.702-1-manasi.d.navare@intel.com
(cherry picked from commit 1e712535c5)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Currently, i915 appears to rely on blocking modesets on
no-longer-present MSTB ports by simply returning NULL for
->best_encoder(), which in turn causes any new atomic commits that don't
disable the CRTC to fail. This is wrong however, since we still want to
allow userspace to disable CRTCs on no-longer-present MSTB ports by
changing the DPMS state to off and this still requires that we retrieve
an encoder.
So, fix this by always returning a valid encoder regardless of the state
of the MST port.
Changes since v1:
- Remove mst atomic helper, since this got replaced with a much simpler
solution
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: stable@vger.kernel.org
Link: https://patchwork.freedesktop.org/patch/msgid/20181008232437.5571-6-lyude@redhat.com
(cherry picked from commit a9f9ca33d1)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Since we need to be able to allow DPMS on->off prop changes after an MST
port has disappeared from the system, we need to be able to make sure we
can compute a config for the resulting atomic commit. Currently this is
impossible when the port has disappeared, since the VCPI slot searching
we try to do in intel_dp_mst_compute_config() will fail with -EINVAL.
Since the only commits we want to allow on no-longer-present MST ports
are ones that shut off display hardware, we already know that no VCPI
allocations are needed. So, hardcode the VCPI slot count to 0 when
intel_dp_mst_compute_config() is called on an MST port that's gone.
Changes since V4:
- Don't use mst_port_gone at all, just check whether or not the drm
connector is registered - Daniel Vetter
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: stable@vger.kernel.org
Link: https://patchwork.freedesktop.org/patch/msgid/20181008232437.5571-5-lyude@redhat.com
(cherry picked from commit f67207d78c)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Currently we set intel_connector->mst_port to NULL to signify that the
MST port has been removed from the system so that we can prevent further
action on the port such as connector probes, mode probing, etc.
However, we're going to need access to intel_connector->mst_port in
order to fixup ->best_encoder() so that it can always return the correct
encoder for an MST port to prevent legacy DPMS prop changes from
failing. This should be safe, so instead keep intel_connector->mst_port
always set and instead just check the status of
drm_connector->regustered to signify whether or not the connector has
disappeared from the system.
Changes since v2:
- Add a comment to mst_port_gone (Jani Nikula)
- Change mst_port_gone to a u8 instead of a bool, per the kernel bot.
Apparently bool is discouraged in structs these days
Changes since v4:
- Don't use mst_port_gone at all! Just check if the connector is
registered or not - Daniel Vetter
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: stable@vger.kernel.org
Link: https://patchwork.freedesktop.org/patch/msgid/20181008232437.5571-4-lyude@redhat.com
(cherry picked from commit 6ed5bb1fba)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Before we can reset the seqno, we have to be sure the engines are idle.
In debugfs/i915_drop_caches_set, we do wait_for_idle but allow ourselves
to be interrupted. We should only proceed to reset the seqno then if we
were not interrupted, and so also avoid overwriting the error status.
References: https://bugs.freedesktop.org/show_bug.cgi?id=108133
Fixes: 6b048706f4 ("drm/i915: Forcibly flush unwanted requests in drop-caches")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181004082119.24970-1-chris@chris-wilson.co.uk
(cherry picked from commit 88a83f3c2d)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
When we decide that a plane is attached to the wrong pipe we try
to turn off said plane. However we are passing around the crtc we
think that the plane is supposed to be using rather than the crtc
it is currently using. That doesn't work all that well because
we may have to do vblank waits etc. and the other pipe might
not even be enabled here. So let's pass the plane's current crtc to
intel_plane_disable_noatomic() so that it can its job correctly.
To do that semi-cleanly we also have to change the plane readout
to record the plane's visibility into the bitmasks of the crtc
where the plane is currently enabled rather than to the crtc
we want to use for the plane.
One caveat here is that our active_planes bitmask will get confused
if both planes are enabled on the same pipe. Fortunately we can use
plane_mask to reconstruct active_planes sufficiently since
plane_mask still has the same meaning (is the plane visible?)
during readout. We also have to do the same during the initial
plane readout as the second plane could clear the active_planes
bit the first plane had already set.
v2: Rely on fixup_active_planes() to populate active_planes fully (Daniel)
Add Daniel's proposed comment to better document why we do this
Drop the redundant intel_set_plane_visible() call
Cc: stable@vger.kernel.org # fcba862e8428 drm/i915: Have plane->get_hw_state() return the current pipe
Cc: stable@vger.kernel.org
Cc: Dennis <dennis.nezic@utoronto.ca>
Cc: Daniel Vetter <daniel@ffwll.ch>
Tested-by: Dennis <dennis.nezic@utoronto.ca>
Tested-by: Peter Nowee <peter.nowee@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105637
Fixes: b1e01595a6 ("drm/i915: Redo plane sanitation during readout")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181003145017.4527-1-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
(cherry picked from commit 62358aa4ee)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Plane sanitation needs vblank interrupts (on account of CxSR disable).
So let's restore vblank interrupts earlier.
v2: Make it actually build
v3: Add comment to explain why we need this (Daniel)
Cc: stable@vger.kernel.org
Cc: Dennis <dennis.nezic@utoronto.ca>
Tested-by: Dennis <dennis.nezic@utoronto.ca>
Tested-by: Peter Nowee <peter.nowee@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105637
Fixes: b1e01595a6 ("drm/i915: Redo plane sanitation during readout")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20181003144951.4397-1-ville.syrjala@linux.intel.com
(cherry picked from commit 68bc30deac)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
commit 4e0b83a567 ("drm/i915: Extract per-platform plane->check()
functions") removed the plane max stride check for sprite planes.
I was going to add it back when introducing GTT remapping for the
display, but after further thought it seems better to re-introduce
it separately.
So let's add the max stride check back. And let's do it in a nicer
form than what we had before and do it for all plane types (easy
now that we have the ->max_stride() plane vfunc).
Only sprite planes really need this for now since primary planes
are capable of scanning out the current max fb size we allow, and
cursors have more stringent stride checks elsewhere.
Cc: José Roberto de Souza <jose.souza@intel.com>
Fixes: 4e0b83a567 ("drm/i915: Extract per-platform plane->check() functions")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180918140243.12207-1-ville.syrjala@linux.intel.com
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
(cherry picked from commit fc3fed5d29)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Since when it was introduced we forgot to add
this case so ICL was using a wrong signal_levels
as reference.
Fixes: fb5c8e9d43 ("drm/i915/icl: Implement voltage swing programming sequence for Combo PHY DDI")
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181017215652.26841-1-rodrigo.vivi@intel.com
Unfortunately, it appears our fix in:
commit b5d29843d8 ("drm/atomic_helper: Allow DPMS On<->Off changes
for unregistered connectors")
Which attempted to work around the problems introduced by:
commit 4d80273976 ("drm/atomic_helper: Disallow new modesets on
unregistered connectors")
Is still not the right solution, as modesets can still be triggered
outside of drm_atomic_set_crtc_for_connector().
So in order to fix this, while still being careful that we don't break
modesets that a driver may perform before being registered with
userspace, we replace connector->registered with a tristate member,
connector->registration_state. This allows us to keep track of whether
or not a connector is still initializing and hasn't been exposed to
userspace, is currently registered and exposed to userspace, or has been
legitimately removed from the system after having once been present.
Using this info, we can prevent userspace from performing new modesets
on unregistered connectors while still allowing the driver to perform
modesets on unregistered connectors before the driver has finished being
registered.
Changes since v1:
- Fix WARN_ON() in drm_connector_cleanup() that CI caught with this
patchset in igt@drv_module_reload@basic-reload-inject and
igt@drv_module_reload@basic-reload by checking if the connector is
registered instead of unregistered, as calling drm_connector_cleanup()
on a connector that hasn't been registered with userspace yet should
stay valid.
- Remove unregistered_connector_check(), and just go back to what we
were doing before in commit 4d80273976 ("drm/atomic_helper: Disallow
new modesets on unregistered connectors") except replacing
READ_ONCE(connector->registered) with drm_connector_is_unregistered().
This gets rid of the behavior of allowing DPMS On<->Off, but that should
be fine as it's more consistent with the UAPI we had before - danvet
- s/drm_connector_unregistered/drm_connector_is_unregistered/ - danvet
- Update documentation, fix some typos.
Fixes: b5d29843d8 ("drm/atomic_helper: Allow DPMS On<->Off changes for unregistered connectors")
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: stable@vger.kernel.org
Cc: David Airlie <airlied@linux.ie>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20181016203946.9601-1-lyude@redhat.com
The ENTER/EXIT_S_STATE actions queue the save/restore operation in GuC
FW and then return, so waiting on the H2G is not enough to guarantee
GuC is done.
When all the processing is done, GuC writes 0 to scratch register 14,
so we can poll on that. Note that GuC does not ensure that the value
in the register is different from 0 while the action is in progress
so we need to take care of that ourselves as well.
v2: improve comment, return early on GuC error and improve error
message (Michal)
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20181016224648.2326-1-daniele.ceraolospurio@intel.com
If BIOS configured a Y tiled FB we failed to set up the backing object
tiling accordingly, leading to a lack of GT fence installed and a
garbled console.
The problem was bisected to
commit 011f22eb54 ("drm/i915: Do NOT skip the first 4k of stolen memory for pre-allocated buffers v2")
but it just revealed a pre-existing issue.
Kudos to Ville who suspected a missing fence looking at the corruption
on the screen.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: <ronald@innovation.ch>
Cc: <stable@vger.kernel.org>
Reported-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reported-by: <ronald@innovation.ch>
Tested-by: <ronald@innovation.ch>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108264
Fixes: bc8d7dffac ("drm/i915/skl: Provide a Skylake version of get_plane_config()")
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181016160011.28347-1-imre.deak@intel.com
In commit 4502e9ec82 ("drm/i915/uc: Unify firmware loading") we
stopped converting errors detected during firmware transfer into
-EAGAIN and this indirectly killed our workarounds for Gen9 GuC.
Reactivate those workarounds by looking for actual -ETIMEDOUT error.
Testcase: igt@drv_selftest@live_hangcheck
Reported-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
References: commit 4502e9ec82 ("drm/i915/uc: Unify firmware loading")
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20181016085931.23532-1-michal.wajdeczko@intel.com
Clang build with UBSAN enabled leads to the following build error:
drivers/gpu/drm/i915/intel_engine_cs.o: In function `intel_engine_init_execlist':
drivers/gpu/drm/i915/intel_engine_cs.c:411: undefined reference to `__compiletime_assert_411'
Again, for this to work the code would first need to be inlined and then
constant folded, which doesn't work for Clang because semantic analysis
happens before optimization/inlining.
Use GEM_BUG_ON() instead of BUILD_BUG_ON().
v2: Use is_power_of_2() from log2.h (Chris)
References: http://mid.mail-archive.com/20181015203410.155997-1-swboyd@chromium.org
Reported-by: Stephen Boyd <swboyd@chromium.org>
Cc: Stephen Boyd <swboyd@chromium.org>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Tested-by: Nathan Chancellor <natechancellor@gmail.com>
Tested-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181016122938.18757-2-jani.nikula@intel.com
When building the kernel with Clang with defconfig and CONFIG_64BIT
disabled, vmlinux fails to link because of the BUILD_BUG in
_print_param.
ld: drivers/gpu/drm/i915/i915_params.o: in function `i915_params_dump':
i915_params.c:(.text+0x56): undefined reference to
`__compiletime_assert_191'
This function is semantically invalid unless the code is first inlined
then constant folded, which doesn't work for Clang because semantic
analysis happens before optimization/inlining.
[The above written by Nathan Chancellor <natechancellor@gmail.com>]
Use WARN_ONCE() instead of BUILD_BUG() to avoid the problem. The
WARN_ONCE() should get optimized away unless there's a type that's not
handled by _print_param().
References: https://github.com/ClangBuiltLinux/linux/issues/191
References: http://mid.mail-archive.com/20181009171401.14980-1-natechancellor@gmail.com
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Nathan Chancellor <natechancellor@gmail.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reported-by: Nick Desaulniers <ndesaulniers@google.com>
Reported-by: Nathan Chancellor <natechancellor@gmail.com>
Tested-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181016122938.18757-1-jani.nikula@intel.com
Rename intel_get_pipe_from_connector() to intel_connector_get_pipe() and
move it near its connector function friends in intel_connector.c. No
functional changes.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181016145044.3924-1-jani.nikula@intel.com
DDI/TC clock-off bits are not equally distanced. TC1-3 bits are
from offset 12 & TC4 is at offset 21.
Create a function to choose correct clk-off bit.
v2: Add fixes tag (Lucas)
Fixes: c27e917e2b ("drm/i915/icl: add basic support for the ICL clocks")
Signed-off-by: Mahesh Kumar <mahesh1.kumar@intel.com>
Signed-off-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181016023752.9285-1-lucas.demarchi@intel.com
combo-phy register instances are at same offset from base for each
combo-phy port, i.e.
Port A base offset: 0x16200
Port B base offset: 0x6C000
All the other addresses for both ports can be derived by calculating
offset to these base addresses.
PORT_CL_DW_OFFSET 0x0
PORT_CL_DW<x> 0 + x * 4
PORT_COMP_OFFSET 0x100
PORT_COMP_DW<x> 0x100 + x * 4
PORT_PCS_AUX_OFFSET 0x300
PORT_PCS_GRP_OFFSET 0x600
PORT_PCS_LN<y>_OFFSET 0x800 + y * 0x100
PORT_TX_AUX_OFFSET 0x380
PORT_TX_GRP_OFFSET 0x680
PORT_TX_LN<y>_OFFSET 0x880 + y * 0x100
And inside each PORT_TX_[AUX|GRP|LN] we add `dw * 4`.
Based on original patch by Mahesh Kumar <mahesh1.kumar@intel.com>.
v2: make port, dw and ln arguments follow the order in
register's name
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Mahesh Kumar <mahesh1.kumar@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181016023517.8576-1-lucas.demarchi@intel.com
This patch combines CNL/ICL specific port/combophy macros together
at one location. This is prework for patches later in series where
new macros to find port/combophy register will be introduced.
v2: remove wrong empty line
Signed-off-by: Mahesh Kumar <mahesh1.kumar@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181012234717.8284-1-lucas.demarchi@intel.com
This patch adds helper function for identifying
whether the given PLL is combo PHY PLL or not.
This helper function is used inside various ICL
functions to make them scalable.
Signed-off-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Mahesh Kumar <mahesh1.kumar@intel.com>
Cc: Madhav Chauhan <madhav.chauhan@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181003072203.12848-6-mahesh1.kumar@intel.com
Use intel_port_is_tc and intel_port_is_combophy
functions to replace the individual port checks
from port C to F and port A to B respectively.
Signed-off-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Mahesh Kumar <mahesh1.kumar@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Madhav Chauhan <madhav.chauhan@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181003072203.12848-5-mahesh1.kumar@intel.com
Use the existing port-to-id helper function, to refactor
hence making it scalable.
Signed-off-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Mahesh Kumar <mahesh1.kumar@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Madhav Chauhan <madhav.chauhan@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181003072203.12848-4-mahesh1.kumar@intel.com
This patch creates a function/wrapper to check if port is combophy port
instead of explicitly comparing ports.
Changes since V1:
- keep all intel_port_is_* helper together (Lucas)
Signed-off-by: Mahesh Kumar <mahesh1.kumar@intel.com>
Cc: Madhav Chauhan <madhav.chauhan@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181004085043.10154-1-mahesh1.kumar@intel.com
Display WA #1178 is meant to fix Aux channel voltage swing too low with
some type C dongles. It applies to external ports on combo phy. On
Icelake this is port A and B when those are not eDP.
v2: follow the spec to the letter: include Aux A and just check if it's
not eDP instead of checking only for Aux B.
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181012215758.25342-1-lucas.demarchi@intel.com
has_drrs is a flag we can't read out. We set it when seamless DRRS is
enabled in pipe_config, so intel_dump_pipe_config() and
intel_pipe_config_compare() will continue to do the right thing when
has_drrs is set on the real state.
This removes one more dereference of crtc->config.
While at it, fixup the comment and also read out M2_N2 for CHV, since
we program it in the set_m_n function.
Changes since v1:
- Only read out M2/N2 on platforms that support DRRS.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181015094023.6211-1-maarten.lankhorst@linux.intel.com
Another user of crtc->config gone. The functions it calls also
needed crtc->config, so convert those as well.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
[mlankhorst: Still pass m_n struct to intel_pch_transcoder_set_m_n (Ville)]
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181011100457.8776-3-maarten.lankhorst@linux.intel.com
Disable master interrupt before reading level indications.
This will close a race where we get a level indication between
reading and disabling, generating an extra interrupt where we
could have avoided one.
Further, as the reading acts also as a post, replace the
write/post on the irq reset with the helper. On enabling side,
posting doesn't serve any purpose so it can also be replaced
with helper.
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181015141440.21845-3-mika.kuoppala@linux.intel.com
All other master control register bits, except the enable,
are read only and they are level indications of the second
level interrupt status. Only touch enable bit and rectify
the comment.
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181015141440.21845-2-mika.kuoppala@linux.intel.com
Disable master interrupt before reading level indications.
This will close a race where we get a level indication between
reading and disabling, generating an extra interrupt where we
could have avoided one.
Further, as the reading acts also as a post, replace the
write/post on the irq reset with the helper. On enabling side,
posting doesn't serve any purpose so it can also be replaced
with helper.
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20181015141440.21845-1-mika.kuoppala@linux.intel.com
LSPCON chips can generate YCBCR outputs, if asked nicely :).
In order to generate YCBCR 4:2:0 outputs, a source must:
- send YCBCR 4:4:4 signals to LSPCON
- program color space as 4:2:0 in AVI infoframes
Whereas for YCBCR 4:4:4 outputs, the source must:
- send YCBCR 4:4:4 signals to LSPCON
- program color space as 4:4:4 in AVI infoframes
So for both 4:2:0 as well as 4:4:4 outputs, we are driving the
pipe for YCBCR 4:4:4 output, but AVI infoframe's color space
information indicates LSPCON FW to start scaling down from YCBCR
4:4:4 and generate YCBCR 4:2:0 output. As the scaling is done by
LSPCON device, we need not to reserve a scaler for 4:2:0 outputs.
V2: rebase
V3: Addressed review comments from Ville
- add enum crtc_output_format instead of bool ycbcr420
- use crtc_output_format=4:4:4 for modeset of LSPCON 4:2:0 output
cases in this way we will have YCBCR 4:4:4 framework ready (except
the ABI part)
V4: Added r-b from Maarten (for v3)
Addressed review comments from Ville:
- Do not add a non-atomic state variable to determine lspcon output.
Instead add bool in CRTC state to indicate lspcon based scaling.
V5: Addressed review comments from Ville:
- Change the state bool name from external scaling to something more
relavent.
- Keep the info and adjusted_mode structures const.
- use crtc_state instead of pipe_config.
- Push all the config change into lspcon_ycbcr420_config function.
V6: Rebase, small changes to accommodate changes in patch 2.
V7: Fixed checkpatch warnings for alignment
V8: Rebase
PS: Ignored following warnings to match the current formatting:
drm/i915: Add YCBCR 4:2:0/4:4:4 support for LSPCON
-:53: CHECK:SPACING: spaces preferred around that '<<' (ctx:VxV)
#53: FILE: drivers/gpu/drm/i915/i915_reg.h:8721:
+#define TRANS_MSA_SAMPLING_444 (2<<1)
^
-:54: CHECK:SPACING: spaces preferred around that '<<' (ctx:VxV)
#54: FILE: drivers/gpu/drm/i915/i915_reg.h:8722:
+#define TRANS_MSA_CLRSP_YCBCR (2<<3)
V9: Rebase
V10: Rebase
V11: Rebase
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1539325394-20788-8-git-send-email-shashank.sharma@intel.com
Different LSPCON vendors specify their custom methods to pass
AVI infoframes to the LSPCON chip, so does Parade tech.
This patch adds functions to arrange and write AVI infoframes
into Parade LSPCON chips.
V2: rebase
V3: Added r-b from Maarten
V4: rebase
V5: rebase
V6: rebase
V7: Fixed checkpatch warnings for alignment
V8: Rebase
V9: Rebase
V10: Rebase
Cc: Imre Deak <imre.deak@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1539325394-20788-7-git-send-email-shashank.sharma@intel.com
LSPCON is a DP branch device, so LSPCON vendors define
specific methods to pass AVI infoframes to the the chip.
This patch adds:
- a generic wrapper function for writing AVI infoframes for
all LSPCON devices.
- a vendor specific function to wrire AVI infoframes into
MCA LSPCON devices.
V2: Rebase
V3: Added r-b from Maarten
V4: Rebase
V5: Rebase
V6: Rebase
V7: Fixed checkpatch warnings for alignment
V8: Rebase
V9: Added the retry logic, with 50ms incremental delays while
writing AVI IF
V10: Changed the return value check
V11: Fixed checkpatch warning
V12: Rebase
Cc: Imre Deak <imre.deak@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1539325394-20788-6-git-send-email-shashank.sharma@intel.com
In order to pass AVI infoframes to LSPCON devices, a source has to
write them in a vendor recommended method and location.
This patch series:
- adds generic LSPCON infoframe setup functions.
- registers these functions into existing AVI infoframe framework.
- triggers these functions from modeset sequence.
Next patches in the series will add vendor specific code.
V2: Added new parameter to align with new definition of
drm_hdmi_avi_infoframe_quant_range
V3: Added r-b from Maarten (for V2)
Added new parameter output_format in struct lspcon to accommodate
Ville's review comments on last patch of the series
V4: Addressed Ville's review comment
- Do not add output_format in LSPCON state, as its non-atomic. Add
this into CRTC state (added in a later patch).
V5: Rebase
V6: Rebase
V7: Rebase
V8: Rebase
V9: Rebase
V10: Rebase
V11: Accommodated rebasing changes in intel_git_port fptrs (set_infoframes and infoframe_enabled)
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Imre Deak <imre.deak@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1539325394-20788-5-git-send-email-shashank.sharma@intel.com
Intel LSPCON chip is provided by 2 vendors:
- Megachips America (MCA)
- Parade technologies (Parade tech)
Its important to know the vendor of this chip, as the address to
write AVI infoframes is different for those two.
This patch reads the vendor OUI signature, and marks into LSPCON
encoder structure for future usages.
This patch also does a small re-arrangement of the code, by moving
lspcon mode change into probe function.
V2: Use dp->desc for OUI detection, dont add a helper for this
(Ville)
V3: Rebase, Added r-b from Maarten
V4: Rebase
V5: Rebase
V6: Rebase
V7: Rebase
V8: Rebase
V9: Rebase
V10: Rebase
Cc: Imre Deak <imre.deak@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1539325394-20788-4-git-send-email-shashank.sharma@intel.com
This patch adds support for YCBCR 4:4:4 CRTC output format.
To do this, this patch extends the existing YCBCR 4:2:0
framework by:
- Adding new parameter in for YCBCR 4:4:4 enum crtc_iutput_format.
- Adding case for YCBCR 4:4:4 in while setting AVI infoframes.
- Adding necessary checks in modeset sequence.
V3: Added this patch in the series
V4: Added r-b from Maarten (for v3)
Addressed review comment from Ville:
Do not use (config->output_format > CRTC_OUTPUT_RGB)
V5: Rebase
V6: Rebase and small change, to accommodate changes in patch 2
V7: Fixed checkpatch alignment warnings
V8: Rebase
V9: Rebase
V10: Rebase
V11: Addressed review comment from Ville
Missing output_format_str[INTEL_OUTPUT_FORMAT_YCBCR444]
Added Ville's R-B.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1539325394-20788-3-git-send-email-shashank.sharma@intel.com
Currently, we are using a bool in CRTC state (state->ycbcr420),
to indicate modeset, that the output format is YCBCR 4:2:0. Now in
order to support other YCBCR formats, we will need more such flags.
This patch adds a new enum parameter for YCBCR 4:2:0 outputs, in the
CRTC output formats and then plugs it during the modeset.
V3: Added this patch in the series, to address review comments from
second patchset.
V4: Added r-b from Maarten (on v3)
Addressed review comments from Ville:
- Change the enum name to intel_output_format.
- Start the enum value (INVALID) from 0 instaed of 1.
- Set the crtc's output_format to RGB in encoder's compute_config.
V5: Broke previous patch 1 into two parts,
- first patch to add CRTC output format in general
- second patch (this one) to add YCBCR 4:2:0 output
format specifically.
- Use ARRAY_SIZE(format_str) for output format validity check (Ville)
V6: Added a separate function to calculate crtc_state->output_format, and
calling it from various get_config function (Fix CI build warning)
V7: Fixed checkpatch warnings for alignment
V8: Rebase
V9: Rebase
V10: Rebase
V11: Addressed review comments from Ville:
- Change check for CRTC output format from > ARRAY_SIZE to >= ARRAY_SIZE.
- Check for values < INTEL_OUTPUT_FORMAT_RGB is unnecessary.
- No need to get CRTC YCBCR config, for pre-BDW functions.
Added Ville's r-b.
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Shashank Sharma <shashank.sharma@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1539325394-20788-2-git-send-email-shashank.sharma@intel.com
This patch adds an enum "intel_output_format" to represent
the output format of a particular CRTC. This enum will be
used to produce a RGB/YCBCR4:4:4/YCBCR4:2:0 output format
during the atomic modeset calculations.
V5:
- Created this separate patch to introduce and init output_format.
- Initialize parameters of output_format_str respectively (Jani N).
- Call it intel_output_format than crtc_output_format(Ville).
- Set output format in pipe_config for every encoder (Ville).
- Get rid of extra DRM_DEBUG_KMS during get_pipe_config (Ville)
V6: Rebase
V7: Fixed alignment warnings (checkpatch)
V8: Another check[atch warning for alignment
V9: Rebase
V10: Rebase on top of DSI restructure
V11: Addressed review comment from Ville
- Set CRTC format for pre-HSW get_pipe_config() function too.
Added Ville's R-B
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1539325394-20788-1-git-send-email-shashank.sharma@intel.com
This message is currently marked as DRM_DEBUG_ATOMIC. I would like it
to be DRM_DEBUG_KMS since it is more KMS than atomic, and this will
also make the message appear in the CI logs, which may or may not help
us with some FIFO underrun bugs.
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181004231600.14101-7-paulo.r.zanoni@intel.com
We were writing to PLANE_BUF_CFG(pipe, plane_id) twice for every
platform, and we were even using different values on the gen10- planar
case. The first write is useless since it just gets replaced with the
next one, so kill it.
There's a lot to improve in the DDB code, but let's start by avoiding
the double write.
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181004231600.14101-6-paulo.r.zanoni@intel.com
The transition watermarks ask for Selected Result Blocks (the real
value), not Result Blocks (the integer value). Given how ceilings are
applied in both the non-transition and the transition watermarks
calculations, we can get away with assuming that Selected Result
Blocks is actually Result Blocks minus 1 without any rounding errors.
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181004231600.14101-5-paulo.r.zanoni@intel.com
The transition minimum is 14 blocks for gens 9 and 10, and 4 blocks
for gen 11. This minimum value is supposed to be added to the
configurable trans_amount. This matches both BSpec and additional
information provided by our HW engineers.
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181004231600.14101-3-paulo.r.zanoni@intel.com
Function intel_framebuffer_init() checks for the possibilities during
framebuffer creation (addfb ioctl time). It is missing the fact that
the indexed format is not supported with Yf tiling.
It is worth noticing that skl_plane_format_mod_supported() correctly
handles for the C8/Yf combination, but this function runs during
modeset time, so we only reject the combination later.
Ville recently proposed a new IGT test that only uses addfb to assert
supported formats, so that IGT was failing. Add the check so we get
green squares right from the start after Ville merges his test.
Also drive-by fix the missing /* fall through */ in the chunk we
modified by just turning it into a "break;" since IMHO breaks are
easier to read than fall-throughs.
BSpec: 18565
Testcase: igt/kms_addfb_basic/expected-formats (not merged yet)
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180925001913.29460-1-paulo.r.zanoni@intel.com
We need extra load failure point to better test error path in
i915_driver_init_mmio.
Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20181011130008.24640-2-michal.wajdeczko@intel.com
In case of the error we missed to call i915_mmio_cleanup
that matches earlier call to i915_mmio_setup.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20181011130008.24640-1-michal.wajdeczko@intel.com
This new AML PCI ID uses the same gen graphics as Coffe Lake not a
Kaby Lake one like the other AMLs.
So to make it more explicit renaming INTEL_AML_GT2_IDS to
INTEL_AML_KBL_GT2_IDS and naming this id as INTEL_AML_CFL_GT2_IDS.
v2:
- missed add new AML macro to INTEL_CFL_IDS()
- added derivated platform initials to AML macros
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180927010650.22731-1-jose.souza@intel.com
For mmap-exhaustion, we deliberately put the system under a large amount
of pressure to ensure that we are able to reap mmap-offsets from dead
objects. If background activity does that reaping for us, that defeats
the purpose of the test and in some cases will fail our sanity checks
(because of the fake activity we use to prevent the idle worker).
Fixes: 932cac10c8 ("drm/i915/selftests: Prevent background reaping of acti
ve objects")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181011103748.18387-1-chris@chris-wilson.co.uk
Check we can handle a late display load failure where the final act of
registering the connector fails.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Acked-by: Jani Nikula <jani.nikula@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181010123833.16797-1-chris@chris-wilson.co.uk
Now that we have intel_connector.c, move the connector specific
functions from intel_display.c there. Fix a few checkpatch complaints
while at it. No functional changes.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181010075205.7713-2-jani.nikula@intel.com
The common denominator here seems to be connector more than
modes. Prepare for moving more connector functions to the same place. No
functional changes.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181010075205.7713-1-jani.nikula@intel.com
For a while we carried lvds connector specific data in the lvds
connector, but since commit 05c72e77cc ("drm/i915: Nuke the LVDS lid
notifier") we haven't needed it. Revert back to plain intel_connector.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181009210916.19578-1-jani.nikula@intel.com
This patch fixes the original commit c0cfb10d9e ("drm/i915/edp:
Do not do link training fallback or prune modes on EDP") that causes
a blank screen in case of certain eDP panels (Eg: seen on Dell XPS13 9350)
where first link training fails and a retraining is required by falling
back to lower link rate/lane count.
In case of some panels they advertise higher link rate/lane count
than whats required for supporting the panel's native mode.
But we always link train at highest link rate/lane count for eDP
and if that fails we can still fallback to lower link rate/lane count
as long as the fallback link BW still fits the native mode to avoid
pruning the panel's native mode yet retraining at fallback values
to recover from a blank screen.
v3:
* Add const for fixed_mode (Ville)
v2:
* Send uevent if link failure on eDP unconditionally
Fixes: c0cfb10d9e ("drm/i915/edp: Do not do link training fallback or prune modes on EDP")
Cc: Clinton Taylor <clinton.a.taylor@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: <stable@vger.kernel.org> # v4.17+
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107489
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105338
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Tested-by: Alexander Wilson <alexander.wilson@ncf.edu>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181009212804.702-1-manasi.d.navare@intel.com
Almost all of the connector destroy functions do the same thing. The
differences are in the edid, detect_edid and panel cleanups, but those
are safely NULL when not initialized. Roll out a common connector
destroy hook.
Inspired by commit bc3213c444 ("drm/i915: Drop the eDP check from
intel_dp_connector_destroy()").
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181009141103.20387-1-jani.nikula@intel.com
Currently, i915 appears to rely on blocking modesets on
no-longer-present MSTB ports by simply returning NULL for
->best_encoder(), which in turn causes any new atomic commits that don't
disable the CRTC to fail. This is wrong however, since we still want to
allow userspace to disable CRTCs on no-longer-present MSTB ports by
changing the DPMS state to off and this still requires that we retrieve
an encoder.
So, fix this by always returning a valid encoder regardless of the state
of the MST port.
Changes since v1:
- Remove mst atomic helper, since this got replaced with a much simpler
solution
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: stable@vger.kernel.org
Link: https://patchwork.freedesktop.org/patch/msgid/20181008232437.5571-6-lyude@redhat.com
Since we need to be able to allow DPMS on->off prop changes after an MST
port has disappeared from the system, we need to be able to make sure we
can compute a config for the resulting atomic commit. Currently this is
impossible when the port has disappeared, since the VCPI slot searching
we try to do in intel_dp_mst_compute_config() will fail with -EINVAL.
Since the only commits we want to allow on no-longer-present MST ports
are ones that shut off display hardware, we already know that no VCPI
allocations are needed. So, hardcode the VCPI slot count to 0 when
intel_dp_mst_compute_config() is called on an MST port that's gone.
Changes since V4:
- Don't use mst_port_gone at all, just check whether or not the drm
connector is registered - Daniel Vetter
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: stable@vger.kernel.org
Link: https://patchwork.freedesktop.org/patch/msgid/20181008232437.5571-5-lyude@redhat.com
Currently we set intel_connector->mst_port to NULL to signify that the
MST port has been removed from the system so that we can prevent further
action on the port such as connector probes, mode probing, etc.
However, we're going to need access to intel_connector->mst_port in
order to fixup ->best_encoder() so that it can always return the correct
encoder for an MST port to prevent legacy DPMS prop changes from
failing. This should be safe, so instead keep intel_connector->mst_port
always set and instead just check the status of
drm_connector->regustered to signify whether or not the connector has
disappeared from the system.
Changes since v2:
- Add a comment to mst_port_gone (Jani Nikula)
- Change mst_port_gone to a u8 instead of a bool, per the kernel bot.
Apparently bool is discouraged in structs these days
Changes since v4:
- Don't use mst_port_gone at all! Just check if the connector is
registered or not - Daniel Vetter
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: stable@vger.kernel.org
Link: https://patchwork.freedesktop.org/patch/msgid/20181008232437.5571-4-lyude@redhat.com
As long as the connector was zeroed during allocation calling
intel_panel_fini() is safe even if we haven't initialized
the panel struct explicitly. So let's drop the useless eDP
check from dp connector destruction.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181008134641.24868-2-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Currently we destroy the backlight during connector unregistration.
That means the final modeset performed by drm_atomic_helper_shutdown()
will leave the backlight on. We don't want that so let's just move
intel_panel_destroy_backlight() into intel_panel_fini() which gets
called during connector destuction.
We still unregister the user visible backlight device during connector
unregistration.
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181008134641.24868-1-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=106386
Incorrect TDL's SSP address shift in SARB for 16:6 & 18:8 modes.
Disable the Sampler state prefetch functionality in the SARB by
programming 0xB000[30] to '1'. This is to be done at boot time
and the feature must remain disabled permanently.
Fixes flaky tex-mip-level-selection* piglit tests with Mesa i965
driver.
Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181004182939.7668-6-radhakrishna.sripada@intel.com
Shader feature to prefetch binding tables does not support 16:6 18:8 BTP
formats. Enabling fault handling could result in hangs with faults.
Disabling demand prefetch would disable binding table prefetch.
V2: Fix the stepping rivision to B0(Mika)
References: HSDES#1406609255, HSDES#1406573985
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181004182939.7668-5-radhakrishna.sripada@intel.com
s/crtc/crtc_state/ for the kernel doc as well as the params.
Fixes: 65c307fd08 ("drm/i915: Make shared dpll functions take crtc_state, v3.")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181008104808.17457-1-chris@chris-wilson.co.uk
Use a more familiar naming pattern for our variables in the sprite plane
init function.
v2: Drop the redundant 'plane' from plane_formats and num_planes_formats
too
v3: Rebase due to ->max_stride() and ->check_plane() changes
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> #v2
Link: https://patchwork.freedesktop.org/patch/msgid/20181005125817.22576-11-ville.syrjala@linux.intel.com
There's not much point in following the primary vs. sprite split
for the SKL+ universal plane init code. The only difference is
of our own doing in the form of the .check_plane(). Let's make
a small exception for that little detail and otherwise share
the same code to initialize all the universal planes.
Eventually we should eliminate the mess around .check_plane()
as well, but for now let's be happy with some code reduction.
v2: Remember to set up plane->has_fbc
Make skl_plane_has_ccs() static
v3: Rebase due to NV12, rename some variables
v4: Don't leave the color_encoding/range props behind
v5: Rebase dur to blend properties, skl_plane_max_stride() and
skl_plane_check()
v6: Make skl_update_plane() static
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> #v4
Link: https://patchwork.freedesktop.org/patch/msgid/20181005125817.22576-10-ville.syrjala@linux.intel.com
Pull the common plane+plane_state allocation into a small helper.
Reduces the amount of boilerplate in the plane initialization
functions.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181005125817.22576-9-ville.syrjala@linux.intel.com
No point in having each caller of intel_create_plane_state() initialize
the scaler_id to -1. Instead just do it in intel_create_plane_state().
Previously we left scaler_id at 0 for pre-SKL platforms, but I can't
see how initializing it to -1 always would cause any harm.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181005125817.22576-8-ville.syrjala@linux.intel.com
All SKL+ universal planes support the same set of formats (with the
exception of NV12 which we don't expose yet). Make the format lists
for primary and sprites the same.
And make the format list const while at it.
v2: Deal with the "planar" format list as well
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181005125817.22576-7-ville.syrjala@linux.intel.com
Plane scaling is not supported with specific pixel formats. Disallow
plane scaling when such a format is used. Currently the only such
pixel format we expose is C8, but in case we add more in the future
let's make it easy to deal with them.
v2: Redo due to plane_check() refactoring
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> #v1
Link: https://patchwork.freedesktop.org/patch/msgid/20181005125817.22576-6-ville.syrjala@linux.intel.com
All CNL universal planes support horizontal mirroring. Currently
we expose the capability only for the primary plane. Expose it
for the overlay planes as well.
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181005125817.22576-5-ville.syrjala@linux.intel.com
We're currently not providing the possible_crtcs mask to
drm_universal_plane_init() for primary/cursor planes. While that does
work on account of drm_crtc_init_with_planes() filling those up
for us, it's inconsisten with what we're doing for sprite planes.
Let's just always pass the possible_crtcs bitmask to
drm_universal_plane_init(). This does assume that crtc->index
== pipe. But we're already making that assumption elsewhere so
it doesn't seem like a very big sin here.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181005125817.22576-3-ville.syrjala@linux.intel.com
Previously only cancelled dma map of a ggtt page when the ggtt entry was
cleared. This patch will cancel dma map of an old ggtt page as well when
the ggtt entry is updated with new page address.
Fixes: 7598e8700e9a(drm/i915/gvt: Missed to cancel dma map for ggtt entries)
Signed-off-by: Hang Yuan <hang.yuan@linux.intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
ALPM is a requirement and we don't need to keep it's cached, what
were done in commit 97c9de66ca
("drm/i915/psr: Fix ALPM cap check for PSR2") but the alpm was not
removed from i915_psr.
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181003205031.32474-7-jose.souza@intel.com
This WA also works fine for PSR2, triggering a selective update when
possible.
Acked-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181003205031.32474-4-jose.souza@intel.com
ICL spec states that this bit is now reserved.
Bspec: 7722
v2(Dhinakaran and Jani):
- instead of remove bit in gen11 now only setting if if gen < 11
- changed commit title
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181003205031.32474-2-jose.souza@intel.com
Now both PSR and PSR2 have the same exit mask, so let's share then
instead of have the same code 2 times.
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181003205031.32474-1-jose.souza@intel.com
No functional change. But just a minor change to keep
up with Spec, since it has changed since commit c3cc39c539
("drm/i915/icl: program mbus during pipe enable")
The instructions previously said to program pipe's
B credit = 24 / number of pipes, which is 8 for ICL.
Now the spec gives us direct values independent of number
of pipes. Let's keep in sync.
Also just a reorder on fields to make easier to compare
against spec's sequence: A -> BW -> B.
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Mahesh Kumar <mahesh1.kumar@intel.com>
Cc: Arthur J Runyan <arthur.j.runyan@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Mahesh Kumar <mahesh1.kumar@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181004151814.6054-1-rodrigo.vivi@intel.com
Amber Lake used the same gen graphics as Kaby Lake. Kernel driver
should configure KBL's DDI buffer setting for AML ULX as well.
So far, driver would load DDI translation table that used for
KBL H/S platform and apply it on AML devices. But AML is belong to
ULX series. This change will lead driver to apply KBL-Y's DDI table
for AML devices to avoid unexpected eDP/DP signal quality issue.
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Jose Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Lee, Shawn C <shawn.c.lee@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1538034499-31256-2-git-send-email-shawn.c.lee@intel.com
