commit 4246a0b63b ("block: add a bi_error field to struct bio")
changed the logic of how dio read endio reports errors.
For single stripe dio read, %bio->bi_status reflects the error before
verifying checksum, and now we're updating it when data block matches
with its checksum, while in the mismatching case, %bio->bi_status is
not updated to relfect that.
When some blocks in a file have been corrupted on disk, reading such a
file ends up with
1) checksum errors are reported in kernel log
2) read(2) returns successfully with some content being 0x01.
In order to fix it, we need to report its checksum mismatch error to
the upper layer (dio layer in this case) as well.
Fixes: 4246a0b63b ("block: add a bi_error field to struct bio")
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reported-by: Goffredo Baroncelli <kreijack@inwind.it>
Tested-by: Goffredo Baroncelli <kreijack@inwind.it>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Previously, we were calling del_qgroup_item, and ignoring the return code
resulting in a potential to have divergent in-memory state without an
error. Perhaps, it makes sense to handle this error code, and put the
filesystem into a read only, or similar state.
This patch only adds reporting of the error if the error is fatal,
(any error other than qgroup not found).
Signed-off-by: Sargun Dhillon <sargun@sargun.me>
Reviewed-by: Qu Wenruo <quwenruo.btrfs@gmx.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently even if the underlying disk reports failure on IO,
compressed read endio still gets to verify checksum and reports it as
a checksum error.
In fact, if some IO have failed during reading a compressed data
extent , there's no way the checksum could match, therefore, we can
skip that in order to return error quickly to the upper layer.
Please note that we need to do this after recording the failed mirror
index so that read-repair in the upper layer's endio can work
properly.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Tested-by: Paul Jones <paul@pauljones.id.au>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The kernel oops happens at
kernel BUG at fs/btrfs/extent_io.c:2104!
...
RIP: clean_io_failure+0x263/0x2a0 [btrfs]
It's showing that read-repair code is using an improper mirror index.
This is due to the fact that compression read's endio hasn't recorded
the failed mirror index in %cb->orig_bio.
With this, btrfs's read-repair can work properly on reading compressed
data.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reported-by: Paul Jones <paul@pauljones.id.au>
Tested-by: Paul Jones <paul@pauljones.id.au>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This seems to be a leftover of commit cf8cddd38b ("btrfs: don't
abuse REQ_OP_* flags for btrfs_map_block").
It should use btrfs_op() helper to provide one of 'enum btrfs_map_op'
types.
Fixes: cf8cddd38b ("btrfs: don't abuse REQ_OP_* flags for btrfs_map_block")
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: Satoru Takeuchi <satoru.takeuchi@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
It doesn't make sense to backup tree roots when doing fsync, since
during fsync those tree roots have not been consistent on disk.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: Qu Wenruo <quwenruo.btrfs@gmx.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently, "btrfs quota enable" would fail after "btrfs quota disable" on
the first time with syslog output "qgroup_rescan_init failed with -22", but
it would succeed on the second time.
When "quota disable" is called, BTRFS_FS_QUOTA_DISABLING flag bit will be
set in fs_info->flags in btrfs_quota_disable(), but it will not be droppd
in btrfs_run_qgroups() (which is called in btrfs_commit_transaction())
because quota_root has already been freed. If "quota enable" is called
after that, both BTRFS_FS_QUOTA_DISABLING and BTRFS_FS_QUOTA_ENABLED flag
would be dropped in the btrfs_run_qgroups() since quota_root is not NULL.
This leads to the failure of "quota enable" on the first time.
BTRFS_FS_QUOTA_DISABLING flag is not used outside of "quota disable"
context and is equivalent to whether quota_root is NULL or not.
btrfs_run_qgroups() checks whether quota_root is NULL or not in the first
place.
So, let's remove BTRFS_FS_QUOTA_DISABLING flag.
Signed-off-by: Tomohiro Misono <misono.tomohiro@jp.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_cmp_data_prepare() (almost) always returns 0 i.e. ignoring errors
from gather_extent_pages(). While the pages are freed by
btrfs_cmp_data_free(), cmp->num_pages still has > 0. Then,
btrfs_extent_same() try to access the already freed pages causing faults
(or violates PageLocked assertion).
This patch just return the error as is so that the caller stop the process.
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Fixes: f441460202 ("btrfs: fix deadlock with extent-same and readpage")
Cc: <stable@vger.kernel.org> # 4.2
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
`btrfs sub set-default` succeeds to set an ID which isn't corresponding to any
fs/file tree. If such the bad ID is set to a filesystem, we can't mount this
filesystem without specifying `subvol` or `subvolid` mount options.
Fixes: 6ef5ed0d38 ("Btrfs: add ioctl and incompat flag to set the default mount subvol")
Cc: <stable@vger.kernel.org>
Signed-off-by: Satoru Takeuchi <satoru.takeuchi@gmail.com>
Reviewed-by: Qu Wenruo <quwenruo.btrfs@gmx.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
ENOTSUPP should not be returned to the user program.
(cf. include/linux/errno.h)
Therefore, EOPNOTSUPP is used instead of ENOTSUPP.
Signed-off-by: Tsutomu Itoh <t-itoh@jp.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
__del_reloc_root should be called before freeing up reloc_root->node.
If not, calling __del_reloc_root() dereference reloc_root->node, causing
the system BUG.
Fixes: 6bdf131fac ("Btrfs: don't leak reloc root nodes on error")
Cc: <stable@vger.kernel.org> # 4.9
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
__endio_write_update_ordered() repeats the search until it reaches the end
of the specified range. This works well with direct IO path, because before
the function is called, it's ensured that there are ordered extents filling
whole the range. It's not the case, however, when it's called from
run_delalloc_range(): it is possible to have error in the midle of the loop
in e.g. run_delalloc_nocow(), so that there exisits the range not covered
by any ordered extents. By cleaning such "uncomplete" range,
__endio_write_update_ordered() stucks at offset where there're no ordered
extents.
Since the ordered extents are created from head to tail, we can stop the
search if there are no offset progress.
Fixes: 524272607e ("btrfs: Handle delalloc error correctly to avoid ordered extent hang")
Cc: <stable@vger.kernel.org> # 4.12
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: Qu Wenruo <quwenruo.btrfs@gmx.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Commit 524272607e ("btrfs: Handle delalloc error correctly to avoid
ordered extent hang") introduced btrfs_cleanup_ordered_extents() to cleanup
submitted ordered extents. However, it does not clear the ordered bit
(Private2) of corresponding pages. Thus, the following BUG occurs from
free_pages_check_bad() (on btrfs/125 with nospace_cache).
BUG: Bad page state in process btrfs pfn:3fa787
page:ffffdf2acfe9e1c0 count:0 mapcount:0 mapping: (null) index:0xd
flags: 0x8000000000002008(uptodate|private_2)
raw: 8000000000002008 0000000000000000 000000000000000d 00000000ffffffff
raw: ffffdf2acf5c1b20 ffffb443802238b0 0000000000000000 0000000000000000
page dumped because: PAGE_FLAGS_CHECK_AT_FREE flag(s) set
bad because of flags: 0x2000(private_2)
This patch clears the flag same as other places calling
btrfs_dec_test_ordered_pending() for every page in the specified range.
Fixes: 524272607e ("btrfs: Handle delalloc error correctly to avoid ordered extent hang")
Cc: <stable@vger.kernel.org> # 4.12
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: Qu Wenruo <quwenruo.btrfs@gmx.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
fs_info->super_copy->{node,sector}size are little-endian, but the ioctl
should return the values in native endianness. Use the cached values in
btrfs_fs_info instead. Found with sparse.
Fixes: 80a773fbfc ("btrfs: retrieve more info from FS_INFO ioctl")
Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
flush_epd_write_bio() sets bio->bi_opf by itself to honor REQ_SYNC,
but it's not needed at all since bio->bi_opf has set up properly in
both __extent_writepage() and write_one_eb(), and in the case of
write_one_eb(), it also sets REQ_META, which we will lose in
flush_epd_write_bio().
This remove this unnecessary bio->bi_opf setting.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This updates btrfs to use the helper wbc_to_write_flags which has been
applied in ext4/xfs/f2fs/block.
Please note that, with this, btrfs's dirty pages written by a
writeback job will carry the flag REQ_BACKGROUND, which is currently
used by writeback-throttle to determine whether it should go to get a
request or wait.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Pull nowait read support from Al Viro:
"Support IOCB_NOWAIT for buffered reads and block devices"
* 'work.read_write' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
block_dev: support RFW_NOWAIT on block device nodes
fs: support RWF_NOWAIT for buffered reads
fs: support IOCB_NOWAIT in generic_file_buffered_read
fs: pass iocb to do_generic_file_read
Pull mount flag updates from Al Viro:
"Another chunk of fmount preparations from dhowells; only trivial
conflicts for that part. It separates MS_... bits (very grotty
mount(2) ABI) from the struct super_block ->s_flags (kernel-internal,
only a small subset of MS_... stuff).
This does *not* convert the filesystems to new constants; only the
infrastructure is done here. The next step in that series is where the
conflicts would be; that's the conversion of filesystems. It's purely
mechanical and it's better done after the merge, so if you could run
something like
list=$(for i in MS_RDONLY MS_NOSUID MS_NODEV MS_NOEXEC MS_SYNCHRONOUS MS_MANDLOCK MS_DIRSYNC MS_NOATIME MS_NODIRATIME MS_SILENT MS_POSIXACL MS_KERNMOUNT MS_I_VERSION MS_LAZYTIME; do git grep -l $i fs drivers/staging/lustre drivers/mtd ipc mm include/linux; done|sort|uniq|grep -v '^fs/namespace.c$')
sed -i -e 's/\<MS_RDONLY\>/SB_RDONLY/g' \
-e 's/\<MS_NOSUID\>/SB_NOSUID/g' \
-e 's/\<MS_NODEV\>/SB_NODEV/g' \
-e 's/\<MS_NOEXEC\>/SB_NOEXEC/g' \
-e 's/\<MS_SYNCHRONOUS\>/SB_SYNCHRONOUS/g' \
-e 's/\<MS_MANDLOCK\>/SB_MANDLOCK/g' \
-e 's/\<MS_DIRSYNC\>/SB_DIRSYNC/g' \
-e 's/\<MS_NOATIME\>/SB_NOATIME/g' \
-e 's/\<MS_NODIRATIME\>/SB_NODIRATIME/g' \
-e 's/\<MS_SILENT\>/SB_SILENT/g' \
-e 's/\<MS_POSIXACL\>/SB_POSIXACL/g' \
-e 's/\<MS_KERNMOUNT\>/SB_KERNMOUNT/g' \
-e 's/\<MS_I_VERSION\>/SB_I_VERSION/g' \
-e 's/\<MS_LAZYTIME\>/SB_LAZYTIME/g' \
$list
and commit it with something along the lines of 'convert filesystems
away from use of MS_... constants' as commit message, it would save a
quite a bit of headache next cycle"
* 'work.mount' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
VFS: Differentiate mount flags (MS_*) from internal superblock flags
VFS: Convert sb->s_flags & MS_RDONLY to sb_rdonly(sb)
vfs: Add sb_rdonly(sb) to query the MS_RDONLY flag on s_flags
Pull more set_fs removal from Al Viro:
"Christoph's 'use kernel_read and friends rather than open-coding
set_fs()' series"
* 'work.set_fs' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fs: unexport vfs_readv and vfs_writev
fs: unexport vfs_read and vfs_write
fs: unexport __vfs_read/__vfs_write
lustre: switch to kernel_write
gadget/f_mass_storage: stop messing with the address limit
mconsole: switch to kernel_read
btrfs: switch write_buf to kernel_write
net/9p: switch p9_fd_read to kernel_write
mm/nommu: switch do_mmap_private to kernel_read
serial2002: switch serial2002_tty_write to kernel_{read/write}
fs: make the buf argument to __kernel_write a void pointer
fs: fix kernel_write prototype
fs: fix kernel_read prototype
fs: move kernel_read to fs/read_write.c
fs: move kernel_write to fs/read_write.c
autofs4: switch autofs4_write to __kernel_write
ashmem: switch to ->read_iter
Pull zstd support from Chris Mason:
"Nick Terrell's patch series to add zstd support to the kernel has been
floating around for a while. After talking with Dave Sterba, Herbert
and Phillip, we decided to send the whole thing in as one pull
request.
zstd is a big win in speed over zlib and in compression ratio over
lzo, and the compression team here at FB has gotten great results
using it in production. Nick will continue to update the kernel side
with new improvements from the open source zstd userland code.
Nick has a number of benchmarks for the main zstd code in his lib/zstd
commit:
I ran the benchmarks on a Ubuntu 14.04 VM with 2 cores and 4 GiB
of RAM. The VM is running on a MacBook Pro with a 3.1 GHz Intel
Core i7 processor, 16 GB of RAM, and a SSD. I benchmarked using
`silesia.tar` [3], which is 211,988,480 B large. Run the following
commands for the benchmark:
sudo modprobe zstd_compress_test
sudo mknod zstd_compress_test c 245 0
sudo cp silesia.tar zstd_compress_test
The time is reported by the time of the userland `cp`.
The MB/s is computed with
1,536,217,008 B / time(buffer size, hash)
which includes the time to copy from userland.
The Adjusted MB/s is computed with
1,536,217,088 B / (time(buffer size, hash) - time(buffer size, none)).
The memory reported is the amount of memory the compressor
requests.
| Method | Size (B) | Time (s) | Ratio | MB/s | Adj MB/s | Mem (MB) |
|----------|----------|----------|-------|---------|----------|----------|
| none | 11988480 | 0.100 | 1 | 2119.88 | - | - |
| zstd -1 | 73645762 | 1.044 | 2.878 | 203.05 | 224.56 | 1.23 |
| zstd -3 | 66988878 | 1.761 | 3.165 | 120.38 | 127.63 | 2.47 |
| zstd -5 | 65001259 | 2.563 | 3.261 | 82.71 | 86.07 | 2.86 |
| zstd -10 | 60165346 | 13.242 | 3.523 | 16.01 | 16.13 | 13.22 |
| zstd -15 | 58009756 | 47.601 | 3.654 | 4.45 | 4.46 | 21.61 |
| zstd -19 | 54014593 | 102.835 | 3.925 | 2.06 | 2.06 | 60.15 |
| zlib -1 | 77260026 | 2.895 | 2.744 | 73.23 | 75.85 | 0.27 |
| zlib -3 | 72972206 | 4.116 | 2.905 | 51.50 | 52.79 | 0.27 |
| zlib -6 | 68190360 | 9.633 | 3.109 | 22.01 | 22.24 | 0.27 |
| zlib -9 | 67613382 | 22.554 | 3.135 | 9.40 | 9.44 | 0.27 |
I benchmarked zstd decompression using the same method on the same
machine. The benchmark file is located in the upstream zstd repo
under `contrib/linux-kernel/zstd_decompress_test.c` [4]. The
memory reported is the amount of memory required to decompress
data compressed with the given compression level. If you know the
maximum size of your input, you can reduce the memory usage of
decompression irrespective of the compression level.
| Method | Time (s) | MB/s | Adjusted MB/s | Memory (MB) |
|----------|----------|---------|---------------|-------------|
| none | 0.025 | 8479.54 | - | - |
| zstd -1 | 0.358 | 592.15 | 636.60 | 0.84 |
| zstd -3 | 0.396 | 535.32 | 571.40 | 1.46 |
| zstd -5 | 0.396 | 535.32 | 571.40 | 1.46 |
| zstd -10 | 0.374 | 566.81 | 607.42 | 2.51 |
| zstd -15 | 0.379 | 559.34 | 598.84 | 4.61 |
| zstd -19 | 0.412 | 514.54 | 547.77 | 8.80 |
| zlib -1 | 0.940 | 225.52 | 231.68 | 0.04 |
| zlib -3 | 0.883 | 240.08 | 247.07 | 0.04 |
| zlib -6 | 0.844 | 251.17 | 258.84 | 0.04 |
| zlib -9 | 0.837 | 253.27 | 287.64 | 0.04 |
I ran a long series of tests and benchmarks on the btrfs side and the
gains are very similar to the core benchmarks Nick ran"
* 'zstd-minimal' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
squashfs: Add zstd support
btrfs: Add zstd support
lib: Add zstd modules
lib: Add xxhash module
Pull btrfs updates from David Sterba:
"The changes range through all types: cleanups, core chagnes, sanity
checks, fixes, other user visible changes, detailed list below:
- deprecated: user transaction ioctl
- mount option ssd does not change allocation alignments
- degraded read-write mount is allowed if all the raid profile
constraints are met, now based on more accurate check
- defrag: do not reset compression afterwards; the NOCOMPRESS flag
can be now overriden by defrag
- prep work for better extent reference tracking (related to the
qgroup slowness with balance)
- prep work for compression heuristics
- memory allocation reductions (may help latencies on a loaded
system)
- better accounting for io waiting states
- error handling improvements (removed BUGs)
- added more sanity checks for shared refs
- fix readdir vs pagefault deadlock under some circumstances
- fix for 'no-hole' mode, certain combination of compressed and
inline extents
- send: fix emission of invalid clone operations
- fixup file mode if setting acls fail
- more fixes from fuzzing
- oher cleanups"
* 'for-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (104 commits)
btrfs: submit superblock io with REQ_META and REQ_PRIO
btrfs: remove unnecessary memory barrier in btrfs_direct_IO
btrfs: remove superfluous chunk_tree argument from btrfs_alloc_dev_extent
btrfs: Remove chunk_objectid parameter of btrfs_alloc_dev_extent
btrfs: pass fs_info to btrfs_del_root instead of tree_root
Btrfs: add one more sanity check for shared ref type
Btrfs: remove BUG_ON in __add_tree_block
Btrfs: remove BUG() in add_data_reference
Btrfs: remove BUG() in print_extent_item
Btrfs: remove BUG() in btrfs_extent_inline_ref_size
Btrfs: convert to use btrfs_get_extent_inline_ref_type
Btrfs: add a helper to retrive extent inline ref type
btrfs: scrub: simplify scrub worker initialization
btrfs: scrub: clean up division in scrub_find_csum
btrfs: scrub: clean up division in __scrub_mark_bitmap
btrfs: scrub: use bool for flush_all_writes
btrfs: preserve i_mode if __btrfs_set_acl() fails
btrfs: Remove extraneous chunk_objectid variable
btrfs: Remove chunk_objectid argument from btrfs_make_block_group
btrfs: Remove extra parentheses from condition in copy_items()
...
Pull block layer updates from Jens Axboe:
"This is the first pull request for 4.14, containing most of the code
changes. It's a quiet series this round, which I think we needed after
the churn of the last few series. This contains:
- Fix for a registration race in loop, from Anton Volkov.
- Overflow complaint fix from Arnd for DAC960.
- Series of drbd changes from the usual suspects.
- Conversion of the stec/skd driver to blk-mq. From Bart.
- A few BFQ improvements/fixes from Paolo.
- CFQ improvement from Ritesh, allowing idling for group idle.
- A few fixes found by Dan's smatch, courtesy of Dan.
- A warning fixup for a race between changing the IO scheduler and
device remova. From David Jeffery.
- A few nbd fixes from Josef.
- Support for cgroup info in blktrace, from Shaohua.
- Also from Shaohua, new features in the null_blk driver to allow it
to actually hold data, among other things.
- Various corner cases and error handling fixes from Weiping Zhang.
- Improvements to the IO stats tracking for blk-mq from me. Can
drastically improve performance for fast devices and/or big
machines.
- Series from Christoph removing bi_bdev as being needed for IO
submission, in preparation for nvme multipathing code.
- Series from Bart, including various cleanups and fixes for switch
fall through case complaints"
* 'for-4.14/block' of git://git.kernel.dk/linux-block: (162 commits)
kernfs: checking for IS_ERR() instead of NULL
drbd: remove BIOSET_NEED_RESCUER flag from drbd_{md_,}io_bio_set
drbd: Fix allyesconfig build, fix recent commit
drbd: switch from kmalloc() to kmalloc_array()
drbd: abort drbd_start_resync if there is no connection
drbd: move global variables to drbd namespace and make some static
drbd: rename "usermode_helper" to "drbd_usermode_helper"
drbd: fix race between handshake and admin disconnect/down
drbd: fix potential deadlock when trying to detach during handshake
drbd: A single dot should be put into a sequence.
drbd: fix rmmod cleanup, remove _all_ debugfs entries
drbd: Use setup_timer() instead of init_timer() to simplify the code.
drbd: fix potential get_ldev/put_ldev refcount imbalance during attach
drbd: new disk-option disable-write-same
drbd: Fix resource role for newly created resources in events2
drbd: mark symbols static where possible
drbd: Send P_NEG_ACK upon write error in protocol != C
drbd: add explicit plugging when submitting batches
drbd: change list_for_each_safe to while(list_first_entry_or_null)
drbd: introduce drbd_recv_header_maybe_unplug
...
Instead of playing with the addressing limits.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
This is based on the old idea and code from Milosz Tanski. With the aio
nowait code it becomes mostly trivial now. Buffered writes continue to
return -EOPNOTSUPP if RWF_NOWAIT is passed.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
This fixes several instances of blk_status_t and bare errno ints being
mixed up, some of which are real bugs.
In the normal case, 0 matches BLK_STS_OK, so we don't observe any
effects of the missing conversion, but in case of errors or passes
through the repair/retry paths, the errors get mixed up.
The changes were identified using 'sparse', we don't have reports of the
buggy behaviour.
Fixes: 4e4cbee93d ("block: switch bios to blk_status_t")
Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This way we don't need a block_device structure to submit I/O. The
block_device has different life time rules from the gendisk and
request_queue and is usually only available when the block device node
is open. Other callers need to explicitly create one (e.g. the lightnvm
passthrough code, or the new nvme multipathing code).
For the actual I/O path all that we need is the gendisk, which exists
once per block device. But given that the block layer also does
partition remapping we additionally need a partition index, which is
used for said remapping in generic_make_request.
Note that all the block drivers generally want request_queue or
sometimes the gendisk, so this removes a layer of indirection all
over the stack.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We won't have the struct block_device available in the bio soon, so switch
to the numerical dev_t instead of the block_device pointer for looking up
the check-integrity state.
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The superblock is also metadata of the filesystem so the relevant IO
should be tagged as such. We also tag it as high priority, as it's the
last block committed for metadata from a given transaction. Any delays
would effectively block the whole transaction, also blocking any other
operation holding the device_list_mutex.
Reviewed-by: Josef Bacik <jbacik@fb.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Commit 38851cc19a ("Btrfs: implement unlocked dio write") implemented
unlocked dio write, allowing multiple dio writers to write to
non-overlapping, and non-eof-extending regions. In doing so it also
introduced a broken memory barrier. It is broken due to 2 things:
1. Memory barriers _MUST_ always be paired, this is clearly not the case
here
2. Checkpatch actually produces a warning if a memory barrier is
introduced that doesn't have a comment explaining how it's being
paired.
Specifically for inode::i_dio_count that's wrapped inside
inode_dio_begin, there is no explicit barrier semantics attached, so
removing is fine as the atomic is used in common the waiter/wakeup
pattern.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ enhance changelog ]
Signed-off-by: David Sterba <dsterba@suse.com>
Currently this function is always called with the object id of the root
key of the chunk_tree, which is always BTRFS_CHUNK_TREE_OBJECTID. So
let's subsume it straight into the function itself. No functional
change.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
THe function is always called with chunk_objectid set to
BTRFS_FIRST_CHUNK_TREE_OBJECTID. Let's collapse the parameter in the
function itself. No functional changes.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Every shared ref has a parent tree block, which can be get from
btrfs_extent_inline_ref_offset(). And the tree block must be aligned
to the nodesize, so we'd know this inline ref is not valid if this
block's bytenr is not aligned to the nodesize, in which case, most
likely the ref type has been misused.
This adds the above mentioned check and also updates
print_extent_item() called by btrfs_print_leaf() to point out the
invalid ref while printing the tree structure.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The BUG_ON() can be triggered when the caller is processing an invalid
extent inline ref, e.g.
a shared data ref is offered instead of an extent data ref, such that
it tries to find a non-existent tree block and then btrfs_search_slot
returns 1 for no such item.
This replaces the BUG_ON() with a WARN() followed by calling
btrfs_print_leaf() to show more details about what's going on and
returning -EINVAL to upper callers.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Now that we have a helper to report invalid value of extent inline ref
type, we need to quit gracefully instead of throwing out a kernel panic.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_print_leaf() is used in btrfs_get_extent_inline_ref_type, so
here we really want to print the invalid value of ref type instead of
causing a kernel panic.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Now that btrfs_get_extent_inline_ref_type() can report if type is a
valid one and all callers can gracefully deal with that, we don't need
to crash here.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Since we have a helper which can do sanity check, this converts all
btrfs_extent_inline_ref_type to it.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
An invalid value of extent inline ref type may be read from a
malicious image which may force btrfs to crash.
This adds a helper which does sanity check for the ref type, so we can
know if it's sane, return he type, otherwise return an error.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ minimal tweak const types, causing warnings due to other cleanup patches ]
Signed-off-by: David Sterba <dsterba@suse.com>
flush_all_writes is an atomic but does not use the semantics at all,
it's just on/off indicator, we can use bool.
Signed-off-by: David Sterba <dsterba@suse.com>
When changing a file's acl mask, btrfs_set_acl() will first set the
group bits of i_mode to the value of the mask, and only then set the
actual extended attribute representing the new acl.
If the second part fails (due to lack of space, for example) and the
file had no acl attribute to begin with, the system will from now on
assume that the mask permission bits are actual group permission bits,
potentially granting access to the wrong users.
Prevent this by restoring the original mode bits if __btrfs_set_acl
fails.
Signed-off-by: Ernesto A. Fernández <ernesto.mnd.fernandez@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
BTRFS_FIRST_CHUNK_TREE_OBJECTIS id the only objectid being used in the
chunk_tree. So remove a variable which is always set to that value and collapse
its usage in callees which are passed this variable. No functional changes
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_make_block_group is always called with chunk_objectid set to
BTRFS_FIRST_CHUNK_TREE_OBJECTID. There's no reason why this behavior will
change anytime soon, so let's remove the argument and decrease the cognitive
load when reading the code path. No functional change
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There is no need for the extra pair of parentheses, remove it. This
fixes the following warning when building with clang:
fs/btrfs/tree-log.c:3694:10: warning: equality comparison with extraneous
parentheses [-Wparentheses-equality]
if ((i == (nr - 1)))
~~^~~~~~~~~~~
Also remove the unnecessary parentheses around the substraction.
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_alloc_dev_extent currently unconditionally sets the uuid in the
leaf block header the function is working with. This is unnecessary
since this operation is peformed by the core btree handling code
(splitting a node, allocating a new btree block etc). So let's remove
it.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This patch provides a band aid to improve the 'out of the box'
behaviour of btrfs for disks that are detected as being an ssd. In a
general purpose mixed workload scenario, the current ssd mode causes
overallocation of available raw disk space for data, while leaving
behind increasing amounts of unused fragmented free space. This
situation leads to early ENOSPC problems which are harming user
experience and adoption of btrfs as a general purpose filesystem.
This patch modifies the data extent allocation behaviour of the ssd mode
to make it behave identical to nossd mode. The metadata behaviour and
additional ssd_spread option stay untouched so far.
Recommendations for future development are to reconsider the current
oversimplified nossd / ssd distinction and the broken detection
mechanism based on the rotational attribute in sysfs and provide
experienced users with a more flexible way to choose allocator behaviour
for data and metadata, optimized for certain use cases, while keeping
sane 'out of the box' default settings. The internals of the current
btrfs code have more potential than what currently gets exposed to the
user to choose from.
The SSD story...
In the first year of btrfs development, around early 2008, btrfs
gained a mount option which enables specific functionality for
filesystems on solid state devices. The first occurance of this
functionality is in commit e18e4809, labeled "Add mount -o ssd, which
includes optimizations for seek free storage".
The effect on allocating free space for doing (data) writes is to
'cluster' writes together, writing them out in contiguous space, as
opposed to a 'tetris' way of putting all separate writes into any free
space fragment that fits (which is what the -o nossd behaviour does).
A somewhat simplified explanation of what happens is that, when for
example, the 'cluster' size is set to 2MiB, when we do some writes, the
data allocator will search for a free space block that is 2MiB big, and
put the writes in there. The ssd mode itself might allow a 2MiB cluster
to be composed of multiple free space extents with some existing data in
between, while the additional ssd_spread mount option kills off this
option and requires fully free space.
The idea behind this is (commit 536ac8ae): "The [...] clusters make it
more likely a given IO will completely overwrite the ssd block, so it
doesn't have to do an internal rwm cycle."; ssd block meaning nand erase
block. So, effectively this means applying a "locality based algorithm"
and trying to outsmart the actual ssd.
Since then, various changes have been made to the involved code, but the
basic idea is still present, and gets activated whenever the ssd mount
option is active. This also happens by default, when the rotational flag
as seen at /sys/block/<device>/queue/rotational is set to 0.
However, there's a number of problems with this approach.
First, what the optimization is trying to do is outsmart the ssd by
assuming there is a relation between the physical address space of the
block device as seen by btrfs and the actual physical storage of the
ssd, and then adjusting data placement. However, since the introduction
of the Flash Translation Layer (FTL) which is a part of the internal
controller of an ssd, these attempts are futile. The use of good quality
FTL in consumer ssd products might have been limited in 2008, but this
situation has changed drastically soon after that time. Today, even the
flash memory in your automatic cat feeding machine or your grandma's
wheelchair has a full featured one.
Second, the behaviour as described above results in the filesystem being
filled up with badly fragmented free space extents because of relatively
small pieces of space that are freed up by deletes, but not selected
again as part of a 'cluster'. Since the algorithm prefers allocating a
new chunk over going back to tetris mode, the end result is a filesystem
in which all raw space is allocated, but which is composed of
underutilized chunks with a 'shotgun blast' pattern of fragmented free
space. Usually, the next problematic thing that happens is the
filesystem wanting to allocate new space for metadata, which causes the
filesystem to fail in spectacular ways.
Third, the default mount options you get for an ssd ('ssd' mode enabled,
'discard' not enabled), in combination with spreading out writes over
the full address space and ignoring freed up space leads to worst case
behaviour in providing information to the ssd itself, since it will
never learn that all the free space left behind is actually free. There
are two ways to let an ssd know previously written data does not have to
be preserved, which are sending explicit signals using discard or
fstrim, or by simply overwriting the space with new data. The worst
case behaviour is the btrfs ssd_spread mount option in combination with
not having discard enabled. It has a side effect of minimizing the reuse
of free space previously written in.
Fourth, the rotational flag in /sys/ does not reliably indicate if the
device is a locally attached ssd. For example, iSCSI or NBD displays as
non-rotational, while a loop device on an ssd shows up as rotational.
The combination of the second and third problem effectively means that
despite all the good intentions, the btrfs ssd mode reliably causes the
ssd hardware and the filesystem structures and performance to be choked
to death. The clickbait version of the title of this story would have
been "Btrfs ssd optimizations considered harmful for ssds".
The current nossd 'tetris' mode (even still without discard) allows a
pattern of overwriting much more previously used space, causing many
more implicit discards to happen because of the overwrite information
the ssd gets. The actual location in the physical address space, as seen
from the point of view of btrfs is irrelevant, because the actual writes
to the low level flash are reordered anyway thanks to the FTL.
Changes made in the code
1. Make ssd mode data allocation identical to tetris mode, like nossd.
2. Adjust and clean up filesystem mount messages so that we can easily
identify if a kernel has this patch applied or not, when providing
support to end users. Also, make better use of the *_and_info helpers to
only trigger messages on actual state changes.
Backporting notes
Notes for whoever wants to backport this patch to their 4.9 LTS kernel:
* First apply commit 951e7966 "btrfs: drop the nossd flag when
remounting with -o ssd", or fixup the differences manually.
* The rest of the conflicts are because of the fs_info refactoring. So,
for example, instead of using fs_info, it's root->fs_info in
extent-tree.c
Signed-off-by: Hans van Kranenburg <hans.van.kranenburg@mendix.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Although this bio has no data attached, it will reach this condition
(bio->bi_opf & REQ_PREFLUSH) and then update the flush_gen of dev_state
in __btrfsic_submit_bio. So we should still submit it through integrity
checker. Otherwise, the integrity checker will throw the following warning
when I mount a newly created btrfs filesystem.
[10264.755497] btrfs: attempt to write superblock which references block M @29523968 (sdb1/1111654400/0) which is not flushed out of disk's write cache (block flush_gen=1, dev->flush_gen=0)!
[10264.755498] btrfs: attempt to write superblock which references block M @29523968 (sdb1/37912576/0) which is not flushed out of disk's write cache (block flush_gen=1, dev->flush_gen=0)!
Signed-off-by: Lu Fengqi <lufq.fnst@cn.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When doing an incremental send it's possible that the computed send stream
contains clone operations that will fail on the receiver if the receiver
has compression enabled and the clone operations target a sector sized
extent that starts at a zero file offset, is not compressed on the source
filesystem but ends up being compressed and inlined at the destination
filesystem.
Example scenario:
$ mkfs.btrfs -f /dev/sdb
$ mount -o compress /dev/sdb /mnt
# By doing a direct IO write, the data is not compressed.
$ xfs_io -f -d -c "pwrite -S 0xab 0 4K" /mnt/foobar
$ btrfs subvolume snapshot -r /mnt /mnt/mysnap1
$ xfs_io -c "reflink /mnt/foobar 0 8K 4K" /mnt/foobar
$ btrfs subvolume snapshot -r /mnt /mnt/mysnap2
$ btrfs send -f /tmp/1.snap /mnt/mysnap1
$ btrfs send -f /tmp/2.snap -p /mnt/mysnap1 /mnt/mysnap2
$ umount /mnt
$ mkfs.btrfs -f /dev/sdc
$ mount -o compress /dev/sdc /mnt
$ btrfs receive -f /tmp/1.snap /mnt
$ btrfs receive -f /tmp/2.snap /mnt
ERROR: failed to clone extents to foobar
Operation not supported
The same could be achieved by mounting the source filesystem without
compression and doing a buffered IO write instead of a direct IO one,
and mounting the destination filesystem with compression enabled.
So fix this by issuing regular write operations in the send stream
instead of clone operations when the source offset is zero and the
range has a length matching the sector size.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Chris Mason <clm@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There is a corner case that slips through the checkers in functions
reading extent buffer, ie.
if (start < eb->len) and (start + len > eb->len),
then
a) map_private_extent_buffer() returns immediately because
it's thinking the range spans across two pages,
b) and the checkers in read_extent_buffer(), WARN_ON(start > eb->len)
and WARN_ON(start + len > eb->start + eb->len), both are OK in this
corner case, but it'd actually try to access the eb->pages out of
bounds because of (start + len > eb->len).
The case is found by switching extent inline ref type from shared data
ref to non-shared data ref, which is a kind of metadata corruption.
It'd use the wrong helper to access the eb,
eg. btrfs_extent_data_ref_root(eb, ref) is used but the %ref passing
here is "struct btrfs_shared_data_ref". And if the extent item
happens to be the first item in the eb, then offset/length will get
over eb->len which ends up an invalid memory access.
This is adding proper checks in order to avoid invalid memory access,
ie. 'general protection fault', before it's too late.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Chris Mason <clm@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The buffer passed to btrfs_ioctl_tree_search* functions have to be at least
sizeof(struct btrfs_ioctl_search_header). If this is not the case then the
ioctl should return -EOVERFLOW and set the uarg->buf_size to the minimum
required size. Currently btrfs_ioctl_tree_search_v2 would return an -EOVERFLOW
error with ->buf_size being set to the value passed by user space. Fix this by
removing the size check and relying on search_ioctl, which already includes it
and correctly sets buf_size.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently the code checks whether we should do data checksumming in
btrfs_submit_direct and the boolean result of this check is passed to
btrfs_submit_direct_hook, in turn passing it to __btrfs_submit_dio_bio which
actually consumes it. The last function actually has all the necessary context
to figure out whether to skip the check or not, so let's move the check closer
to where it's being consumed. No functional changes.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Chris Mason <clm@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
If the range being cleared was not marked for defrag and we are not
about to clear the range from the defrag status, we don't need to
lock and unlock the inode.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Chris Mason <clm@fb.com>
Reviewed-by: Wang Shilong <wangshilong1991@gmail.com>
Signed-off-by: Chris Mason <clm@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The error return variable ret is initialized to zero and then is
checked to see if it is non-zero in the if-block that follows it.
It is therefore impossible for ret to be non-zero after the if-block
hence the check is redundant and can be removed.
Detected by CoverityScan, CID#1021040 ("Logically dead code")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The internal free space tree management routines are always exposed for
testing purposes. Make them dependent on SANITY_TESTS being on so that
they are exposed only when they really have to.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This variable was added in 1abe9b8a13 ("Btrfs: add initial tracepointi
support for btrfs"), yet it never really got used, only assigned to. So
let's remove it.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We have a WARN_ON(!var) inside an if branch which is executed (among
others) only when var is true.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We aren't using this define, so removing it.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Though BTRFS_FSID_SIZE and BTRFS_UUID_SIZE are of the same size, we
should use the matching constant for the fsid buffer.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Our dir_context->pos is supposed to hold the next position we're
supposed to look. If we successfully insert a delayed dir index we
could end up with a duplicate entry because we don't increase ctx->pos
after doing the dir_emit.
Signed-off-by: Josef Bacik <jbacik@fb.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Readdir does dir_emit while under the btree lock. dir_emit can trigger
the page fault which means we can deadlock. Fix this by allocating a
buffer on opening a directory and copying the readdir into this buffer
and doing dir_emit from outside of the tree lock.
Thread A
readdir <holding tree lock>
dir_emit
<page fault>
down_read(mmap_sem)
Thread B
mmap write
down_write(mmap_sem)
page_mkwrite
wait_ordered_extents
Process C
finish_ordered_extent
insert_reserved_file_extent
try to lock leaf <hang>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ copy the deadlock scenario to changelog ]
Signed-off-by: David Sterba <dsterba@suse.com>
Currently should_alloc_chunk uses ->total_bytes - ->bytes_readonly to
signify the total amount of bytes in this space info. However, given
Jeff's patch which adds bytes_pinned and bytes_may_use to the calculation
of num_allocated it becomes a lot more clear to just eliminate num_bytes
altogether and add the bytes_readonly to the amount of used space. That
way we don't change the results of the following statements. In the
process also start using btrfs_space_info_used.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In a heavy write scenario, we can end up with a large number of pinned bytes.
This can translate into (very) premature ENOSPC because pinned bytes
must be accounted for when allowing a reservation but aren't accounted for
when deciding whether to create a new chunk.
This patch adds the accounting to should_alloc_chunk so that we can
create the chunk.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This is a minimal patch intended to be backported to older kernels.
We're going to extend the string specifying the compression method and
this would fail on kernels before that change (the string is compared
exactly).
Relax the string matching only to the prefix, ie. ignoring anything that
goes after "zlib" or "lzo", regardless of th format extension we decide
to use. This applies to the mount options and properties.
That way, patched old kernels could be booted on systems already
utilizing the new compression spec.
Applicable since commit 63541927c8, v3.14.
Signed-off-by: David Sterba <dsterba@suse.com>
Currently, the BTRFS_INODE_NOCOMPRESS will prevent any compression on a
given file, except when the mount is force-compress. As users have
reported on IRC, this will also prevent compression when requested by
defrag (btrfs fi defrag -c file).
The nocompress flag is set automatically by filesystem when the ratios
are bad and the user would have to manually drop the bit in order to
make defrag -c work. This is not good from the usability perspective.
This patch will raise priority for the defrag -c over nocompress, ie.
any file with NOCOMPRESS bit set will get defragmented. The bit will
remain untouched.
Alternate option was to also drop the nocompress bit and keep the
decision logic as is, but I think this is not the right solution.
Signed-off-by: David Sterba <dsterba@suse.com>
Add new value for compression to distinguish between defrag and
property. Previously, a single variable was used and this caused clashes
when the per-file 'compression' was set and a defrag -c was called.
The property-compression is loaded when the file is open, defrag will
overwrite the same variable and reset to 0 (ie. NONE) at when the file
defragmentaion is finished. That's considered a usability bug.
Now we won't touch the property value, use the defrag-compression. The
precedence of defrag is higher than for property (and whole-filesystem).
Signed-off-by: David Sterba <dsterba@suse.com>
This is preparatory for separating inode compression requested by defrag
and set via properties. This will fix a usability bug when defrag will
reset compression type to NONE. If the file has compression set via
property, it will not apply anymore (until next mount or reset through
command line).
We're going to fix that by adding another variable just for the defrag
call and won't touch the property. The defrag will have higher priority
when deciding whether to compress the data.
Signed-off-by: David Sterba <dsterba@suse.com>
Add skeleton code for compresison heuristics. Now it iterates over all
the pages, but in the end always says "yes, compress please", ie it does
not change the current behaviour.
In the future we're going to add various heuristics to analyze the data.
This patch can be used as a baseline for measuring if the effectivness
and performance.
Signed-off-by: Timofey Titovets <nefelim4ag@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ enhanced changelog, modified comments ]
Signed-off-by: David Sterba <dsterba@suse.com>
Correctly account for IO when waiting for a submitted bio in scrub. This
only for the accounting purposes and should not change other behaviour.
Signed-off-by: David Sterba <dsterba@suse.com>
Correctly account for IO when waiting for a submitted DIO read, the case
when we're retrying. This only for the accounting purposes and should
not change other behaviour.
Signed-off-by: David Sterba <dsterba@suse.com>
The pinned chunks might be left over so we clean them but at this point
of close_ctree, there's noone to race with, the locking can be removed.
Signed-off-by: David Sterba <dsterba@suse.com>
The return value of flush_space was used to have significance in the
early days when the code was first introduced and before the ticketed
enospc rework. Since the latter got introduced the return value lost any
significance whatsoever to its callers. So let's remove it. While at it
also remove the unused ticket variable in
btrfs_async_reclaim_metadata_space. It was used in the initial version
of the ticketed ENOSPC work, however Wang Xiaoguang detected a problem
with this and fixed it in ce129655c9 ("btrfs: introduce tickets_id to
determine whether asynchronous metadata reclaim work makes progress").
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ add comment ]
Signed-off-by: David Sterba <dsterba@suse.com>
Userspace transactions were introduced in commit 6bf13c0cc8 ("Btrfs:
transaction ioctls") to provide semantics that Ceph's object store
required. However, things have changed significantly since then, to the
point where btrfs is no longer suitable as a backend for ceph and in
fact it's actively advised against such usages. Considering this, there
doesn't seem to be a widespread, legit use case of userspace
transaction. They also clutter the file->private pointer.
So to end the agony let's nuke the userspace transaction ioctls. As a
first step let's give time for people to voice their objection by just
WARN()ining when the userspace transaction is used.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ move the warning past perm checks, keep the has-been-printed state;
we're ok with just one warning over all filesystems ]
Signed-off-by: David Sterba <dsterba@suse.com>
Superblock is read and written using buffer heads, we need to set the
bdev blocksize. The magic constant has been hardcoded in several places,
so replace it with a named constant.
Signed-off-by: David Sterba <dsterba@suse.com>
There are two independent parts, one that writes the superblocks and
another that waits for completion. No functional changes, but cleanups,
reformatting and comment updates.
Signed-off-by: David Sterba <dsterba@suse.com>
Polish the helper:
* drop underscores, no special meaning here
* pass fs_devices, as this is what the API implements
* drop noinline, no apparent reason for such simple helper
* constify uuid
* add comment
Signed-off-by: David Sterba <dsterba@suse.com>
There are two helpers called in chain from one location, we can merge the
functionaliy.
Originally, alloc_fs_devices could fill the device uuid randomly if we
we didn't give the uuid buffer. This happens for seed devices but the
fsid is generated in btrfs_prepare_sprout, so we can remove it.
Signed-off-by: David Sterba <dsterba@suse.com>
The function submit_extent_page has 15(!) parameters right now, op and
op_flags are effectively one value stored to bio::bi_opf, no need to
pass them separately. So it's 14 parameters now.
Signed-off-by: David Sterba <dsterba@suse.com>
This function prints an informative message and then continues
dev-replace. The message contains a progress percentage which is read
from the status. The status is allocated dynamically, about 2600 bytes,
just to read the single value. That's an overkill. We'll use the new
helper and drop the allocation.
Signed-off-by: David Sterba <dsterba@suse.com>
We'll want to read the percentage value from dev_replace elsewhere, move
the logic to a separate helper.
Signed-off-by: David Sterba <dsterba@suse.com>
All sorts of readahead errors are not considered fatal. We can continue
defragmentation without it, with some potential slow down, which will
last only for the current inode.
Signed-off-by: David Sterba <dsterba@suse.com>
We can safely use GFP_KERNEL, the function is called from two contexts:
- ioctl handler, called directly, no locks taken
- cleaner thread, running all queued defrag work, outside of any locks
Signed-off-by: David Sterba <dsterba@suse.com>
We don't need to restrict the allocation flags in btrfs_mount or
_remount. No big filesystem locks are held (possibly s_umount but that
does no count here).
Signed-off-by: David Sterba <dsterba@suse.com>
One of the error handling paths in __add_reloc_root contains btrfs_panic()
followed by some other code. As the name implies what it does is print
some error message and call BUG, naturally what follow afterwards is not
invoked. So remove this extra code.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This also adjusts the respective callers in other files. Those were
found with -Wunused-parameter.
btrfs_full_stripe_len's mapping_tree - introduced by 53b381b3ab
("Btrfs: RAID5 and RAID6") but it was never really used even in that
commit
btrfs_is_parity_mirror's mirror_num - same as above
chunk_drange_filter's chunk_offset - introduced by 94e60d5a5c ("Btrfs:
devid subset filter") and never used.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
clear_super - usage was removed in commit cea67ab92d ("btrfs: clean
the old superblocks before freeing the device") but that change forgot
to remove the actual variable.
max_key - commit 6174d3cb43 ("Btrfs: remove unused max_key arg from
btrfs_search_forward") removed the max_key parameter but it forgot to
remove references from callers.
stripe_len - this one was added by e06cd3dd7c ("Btrfs: add validadtion
checks for chunk loading") but even then it wasn't used.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
find_raid56_stripe_len statically returns SZ_64K which equals BTRFS_STRIPE_LEN.
It's sole caller is __btrfs_alloc_chunk and it assigns the return value to ai
variable which is already set to BTRFS_STRIPE_LEN. So remove the function
invocation altogether and remove the function itself. Also remove the variable
since it's only aliasing BTRFS_STRIPE_LEN and use the define directly. Use
the occassion to simplify the rounding down of stripe_size now that the value
we want it to align is a power of 2.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Qu Wenruo <quwenruo.btrfs@gmx.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
No functional changes, just make the code more self-explanatory.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_new_inode() is the only consumer move it to inode.c,
from ioctl.c.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
find_workspace() allocates up to num_online_cpus() + 1 workspaces.
free_workspace() will only keep num_online_cpus() workspaces. When
(de)compressing we will allocate num_online_cpus() + 1 workspaces, then
free one, and repeat. Instead, we can just keep num_online_cpus() + 1
workspaces around, and never have to allocate/free another workspace in the
common case.
I tested on a Ubuntu 14.04 VM with 2 cores and 4 GiB of RAM. I mounted a
BtrFS partition with -o compress-force={lzo,zlib,zstd} and logged whenever
a workspace was allocated of freed. Then I copied vmlinux (527 MB) to the
partition. Before the patch, during the copy it would allocate and free 5-6
workspaces. After, it only allocated the initial 3. This held true for lzo,
zlib, and zstd. The time it took to execute cp vmlinux /mnt/btrfs && sync
dropped from 1.70s to 1.44s with lzo compression, and from 2.04s to 1.80s
for zstd compression.
Signed-off-by: Nick Terrell <terrelln@fb.com>
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The helpers append "\n" so we can keep the actual strings shorter. The
extra newline will print an empty line. Some messages have been
slightly modified to be more consistent with the rest (lowercase first
letter).
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The current code was erroneously checking for
root_level > BTRFS_MAX_LEVEL. If we had a root_level of 8 then the check
won't trigger and we could potentially hit a buffer overflow. The
correct check should be root_level >= BTRFS_MAX_LEVEL .
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Qu Wenruo <quwenruo.btrfs@gmx.com>
Signed-off-by: David Sterba <dsterba@suse.com>
For a missing device, btrfs will just refuse to mount with almost
meaningless kernel message like:
BTRFS info (device vdb6): disk space caching is enabled
BTRFS info (device vdb6): has skinny extents
BTRFS error (device vdb6): failed to read the system array: -5
BTRFS error (device vdb6): open_ctree failed
This patch will print a new message about the missing device:
BTRFS info (device vdb6): disk space caching is enabled
BTRFS info (device vdb6): has skinny extents
BTRFS warning (device vdb6): devid 2 uuid 80470722-cad2-4b90-b7c3-fee294552f1b is missing
BTRFS error (device vdb6): failed to read the system array: -5
BTRFS error (device vdb6): open_ctree failed
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
As we use per-chunk degradable check, the global
num_tolerated_disk_barrier_failures is of no use.
We can now remove it.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The last user of num_tolerated_disk_barrier_failures is
barrier_all_devices().
But it can be easily changed to the new per-chunk degradable check
framework.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Just the same for mount time check, use btrfs_check_rw_degradable() to
check if we are OK to be remounted rw.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Now use the btrfs_check_rw_degradable() to check if we can mount in the
degraded mode.
With this patch, we can mount in the following case:
# mkfs.btrfs -f -m raid1 -d single /dev/sdb /dev/sdc
# wipefs -a /dev/sdc
# mount /dev/sdb /mnt/btrfs -o degraded
As the single data chunk is only on sdb, so it's OK to mount as
degraded, as missing one device is OK for RAID1.
But still fail in the following case as expected:
# mkfs.btrfs -f -m raid1 -d single /dev/sdb /dev/sdc
# wipefs -a /dev/sdb
# mount /dev/sdc /mnt/btrfs -o degraded
As the data chunk is only in sdb, so it's not OK to mount it as
degraded.
Reported-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Reported-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Introduce a new function, btrfs_check_rw_degradable(), to check if all
chunks in btrfs is OK for degraded rw mount.
It provides the new basis for accurate btrfs mount/remount and even
runtime degraded mount check other than old one-size-fit-all method.
Btrfs currently uses num_tolerated_disk_barrier_failures to do global
check for tolerated missing device.
Although the one-size-fit-all solution is quite safe, it's too strict
if data and metadata has different duplication level.
For example, if one use Single data and RAID1 metadata for 2 disks, it
means any missing device will make the fs unable to be degraded
mounted.
But in fact, some times all single chunks may be in the existing
device and in that case, we should allow it to be rw degraded mounted.
Such case can be easily reproduced using the following script:
# mkfs.btrfs -f -m raid1 -d sing /dev/sdb /dev/sdc
# wipefs -f /dev/sdc
# mount /dev/sdb -o degraded,rw
If using btrfs-debug-tree to check /dev/sdb, one should find that the
data chunk is only in sdb, so in fact it should allow degraded mount.
This patchset will introduce a new per-chunk degradable check for
btrfs, allow above case to succeed, and it's quite small anyway.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ copied text from cover letter with more details about the problem being
solved ]
Signed-off-by: David Sterba <dsterba@suse.com>
When btrfs fails the checksum check, it'll fill the whole page with
"1".
However, if %csum_expected is 0 (which means there is no checksum), then
for some unknown reason, we just pretend that the read is correct, so
userspace would be confused about the dilemma that read is successful but
getting a page with all content being "1".
This can happen due to a bug in btrfs-convert.
This fixes it by always returning errors if checksum doesn't match.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In btrfs_full_stripe_len/btrfs_is_parity_mirror we have similar code which
gets the chunk map for a particular range via get_chunk_map. However,
get_chunk_map can return an ERR_PTR value and while the 2 callers do catch
this with a WARN_ON they then proceed to indiscriminately dereference the
extent map. This of course leads to a crash. Fix the offenders by making the
dereference conditional on IS_ERR.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Many commits ago the data space_info in alloc_data_chunk_ondemand used to be
acquired from the inode. At that point commit
33b4d47f5e ("Btrfs: deal with NULL space info") got introduced to deal with
spurios cases where the space info could be null, following a rebalance.
Nowadays, however, the space info is referenced directly from the btrfs_fs_info
struct which is initialised at filesystem mount time. This makes the null
checks redundant, so remove them.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
All callers of flush_space pass the same number for orig/num_bytes
arguments. Let's remove one of the numbers and also modify the trace
point to show only a single number - bytes requested.
Seems that last point where the two parameters were treated differently
is before the ticketed enospc rework.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Several distributions mount the "proper root" as ro during initrd and
then remount it as rw before pivot_root(2). Thus, if a rescan had been
aborted by a previous shutdown, the rescan would never be resumed.
This issue would manifest itself as several btrfs ioctl(2)s causing the
entire machine to hang when btrfs_qgroup_wait_for_completion was hit
(due to the fs_info->qgroup_rescan_running flag being set but the rescan
itself not being resumed). Notably, Docker's btrfs storage driver makes
regular use of BTRFS_QUOTA_CTL_DISABLE and BTRFS_IOC_QUOTA_RESCAN_WAIT
(causing this problem to be manifested on boot for some machines).
Cc: <stable@vger.kernel.org> # v3.11+
Cc: Jeff Mahoney <jeffm@suse.com>
Fixes: b382a324b6 ("Btrfs: fix qgroup rescan resume on mount")
Signed-off-by: Aleksa Sarai <asarai@suse.de>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Tested-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Repeating the same computation in multiple places is not
necessary.
Signed-off-by: Edmund Nadolski <enadolski@suse.com>
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When called with a struct share_check, find_parent_nodes()
will detect a shared extent and immediately return with
BACKREF_SHARED_FOUND.
Signed-off-by: Edmund Nadolski <enadolski@suse.com>
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Since backref resolution is CPU-intensive, the cond_resched calls
should help alleviate soft lockup occurences.
Signed-off-by: Edmund Nadolski <enadolski@suse.com>
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This patch adds a tracepoint event for prelim_ref insertion and
merging. For each, the ref being inserted or merged and the count
of tree nodes is issued.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This patch adds counters to each of the rbtrees so that we can tell
how large they are growing for a given workload. These counters
will be exported by tracepoints in the next patch.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
It's been known for a while that the use of multiple lists
that are periodically merged was an algorithmic problem within
btrfs. There are several workloads that don't complete in any
reasonable amount of time (e.g. btrfs/130) and others that cause
soft lockups.
The solution is to use a set of rbtrees that do insertion merging
for both indirect and direct refs, with the former converting
refs into the latter. The result is a btrfs/130 workload that
used to take several hours now takes about half of that. This
runtime still isn't acceptable and a future patch will address that
by moving the rbtrees higher in the stack so the lookups can be
shared across multiple calls to find_parent_nodes.
Signed-off-by: Edmund Nadolski <enadolski@suse.com>
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Commit afce772e87 ("btrfs: fix check_shared for fiemap ioctl") added
the ref_tree code in backref.c to reduce backref searching for
shared extents under the FIEMAP ioctl. This code will not be
compatible with the upcoming rbtree changes for improved backref
searching, so this patch removes the ref_tree code. The rbtree
changes will provide the equivalent functionality for FIEMAP.
The above commit also introduced transaction semantics around calls to
btrfs_check_shared() in order to accurately account for delayed refs.
This functionality needs to be retained, so a complete revert of the
above commit is not desirable. This patch therefore removes the
ref_tree portion of the commit as above, however it does not remove
the transaction portion.
Signed-off-by: Edmund Nadolski <enadolski@suse.com>
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Commit afce772e87 ("btrfs: fix check_shared for fiemap ioctl") added
transaction semantics around calls to btrfs_check_shared() in order to
provide accurate accounting of delayed refs. The transaction management
should be done inside btrfs_check_shared(), so that callers do not need
to manage transactions individually.
Signed-off-by: Edmund Nadolski <enadolski@suse.com>
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We typically use __ to indicate a helper routine that shouldn't be
called directly without understanding the proper context required
to do so. We use static functions to indicate that a function is
private to a particular C file. The backref code uses static
function and __ prefixes on nearly everything, which makes the code
difficult to read and establishes a pattern for future code that
shouldn't be followed. This patch drops all the unnecessary prefixes.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Replacing the double cast and ternary conditional with a helper makes
the code easier on the eyes.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Tracepoint arguments are all read-only. If we mark the arguments
as const, we're able to keep or convert those arguments to const
where appropriate.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We have reader helpers for most of the on-disk structures that use
an extent_buffer and pointer as offset into the buffer that are
read-only. We should mark them as const and, in turn, allow consumers
of these interfaces to mark the buffers const as well.
No impact on code, but serves as documentation that a buffer is intended
not to be modified.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The sectorsize member of btrfs_block_group_cache is unused. So remove it, this
reduces the number of holes in the struct.
With patch:
/* size: 856, cachelines: 14, members: 40 */
/* sum members: 837, holes: 4, sum holes: 19 */
/* bit holes: 1, sum bit holes: 29 bits */
/* last cacheline: 24 bytes */
Without patch:
/* size: 864, cachelines: 14, members: 41 */
/* sum members: 841, holes: 5, sum holes: 23 */
/* bit holes: 1, sum bit holes: 29 bits */
/* last cacheline: 32 bytes */
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
__btrfs_alloc_chunk contains code which boils down to:
ndevs = min(ndevs, devs_max)
It's conditional upon devs_max not being 0. However, it cannot really be 0
since it's always set to either BTRFS_MAX_DEVS_SYS_CHUNK or
BTRFS_MAX_DEVS(fs_info->chunk_root). So eliminate the condition check and use
min explicitly. This has no functional changes.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
No functional changes.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
No functional changes, just make the loop a bit more readable
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Add zstd compression and decompression support to BtrFS. zstd at its
fastest level compresses almost as well as zlib, while offering much
faster compression and decompression, approaching lzo speeds.
I benchmarked btrfs with zstd compression against no compression, lzo
compression, and zlib compression. I benchmarked two scenarios. Copying
a set of files to btrfs, and then reading the files. Copying a tarball
to btrfs, extracting it to btrfs, and then reading the extracted files.
After every operation, I call `sync` and include the sync time.
Between every pair of operations I unmount and remount the filesystem
to avoid caching. The benchmark files can be found in the upstream
zstd source repository under
`contrib/linux-kernel/{btrfs-benchmark.sh,btrfs-extract-benchmark.sh}`
[1] [2].
I ran the benchmarks on a Ubuntu 14.04 VM with 2 cores and 4 GiB of RAM.
The VM is running on a MacBook Pro with a 3.1 GHz Intel Core i7 processor,
16 GB of RAM, and a SSD.
The first compression benchmark is copying 10 copies of the unzipped
Silesia corpus [3] into a BtrFS filesystem mounted with
`-o compress-force=Method`. The decompression benchmark times how long
it takes to `tar` all 10 copies into `/dev/null`. The compression ratio is
measured by comparing the output of `df` and `du`. See the benchmark file
[1] for details. I benchmarked multiple zstd compression levels, although
the patch uses zstd level 1.
| Method | Ratio | Compression MB/s | Decompression speed |
|---------|-------|------------------|---------------------|
| None | 0.99 | 504 | 686 |
| lzo | 1.66 | 398 | 442 |
| zlib | 2.58 | 65 | 241 |
| zstd 1 | 2.57 | 260 | 383 |
| zstd 3 | 2.71 | 174 | 408 |
| zstd 6 | 2.87 | 70 | 398 |
| zstd 9 | 2.92 | 43 | 406 |
| zstd 12 | 2.93 | 21 | 408 |
| zstd 15 | 3.01 | 11 | 354 |
The next benchmark first copies `linux-4.11.6.tar` [4] to btrfs. Then it
measures the compression ratio, extracts the tar, and deletes the tar.
Then it measures the compression ratio again, and `tar`s the extracted
files into `/dev/null`. See the benchmark file [2] for details.
| Method | Tar Ratio | Extract Ratio | Copy (s) | Extract (s)| Read (s) |
|--------|-----------|---------------|----------|------------|----------|
| None | 0.97 | 0.78 | 0.981 | 5.501 | 8.807 |
| lzo | 2.06 | 1.38 | 1.631 | 8.458 | 8.585 |
| zlib | 3.40 | 1.86 | 7.750 | 21.544 | 11.744 |
| zstd 1 | 3.57 | 1.85 | 2.579 | 11.479 | 9.389 |
[1] https://github.com/facebook/zstd/blob/dev/contrib/linux-kernel/btrfs-benchmark.sh
[2] https://github.com/facebook/zstd/blob/dev/contrib/linux-kernel/btrfs-extract-benchmark.sh
[3] http://sun.aei.polsl.pl/~sdeor/index.php?page=silesia
[4] https://cdn.kernel.org/pub/linux/kernel/v4.x/linux-4.11.6.tar.xz
zstd source repository: https://github.com/facebook/zstd
Signed-off-by: Nick Terrell <terrelln@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
Pull btrfs fixes from David Sterba:
"Fixes addressing problems reported by users, and there's one more
regression fix"
* 'for-4.13-part3' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: round down size diff when shrinking/growing device
Btrfs: fix early ENOSPC due to delalloc
btrfs: fix lockup in find_free_extent with read-only block groups
Btrfs: fix dir item validation when replaying xattr deletes
Further testing showed that the fix introduced in 7dfb8be11b ("btrfs:
Round down values which are written for total_bytes_size") was
insufficient and it could still lead to discrepancies between the
total_bytes in the super block and the device total bytes. So this patch
also ensures that the difference between old/new sizes when
shrinking/growing is also rounded down. This ensure that we won't be
subtracting/adding a non-sectorsize multiples to the superblock/device
total sizees.
Fixes: 7dfb8be11b ("btrfs: Round down values which are written for total_bytes_size")
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
If a lot of metadata is reserved for outstanding delayed allocations, we
rely on shrink_delalloc() to reclaim metadata space in order to fulfill
reservation tickets. However, shrink_delalloc() has a shortcut where if
it determines that space can be overcommitted, it will stop early. This
made sense before the ticketed enospc system, but now it means that
shrink_delalloc() will often not reclaim enough space to fulfill any
tickets, leading to an early ENOSPC. (Reservation tickets don't care
about being able to overcommit, they need every byte accounted for.)
Fix it by getting rid of the shortcut so that shrink_delalloc() reclaims
all of the metadata it is supposed to. This fixes early ENOSPCs we were
seeing when doing a btrfs receive to populate a new filesystem, as well
as early ENOSPCs Christoph saw when doing a big cp -r onto Btrfs.
Fixes: 957780eb27 ("Btrfs: introduce ticketed enospc infrastructure")
Tested-by: Christoph Anton Mitterer <mail@christoph.anton.mitterer.name>
Cc: stable@vger.kernel.org
Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
If we have a block group that is all of the following:
1) uncached in memory
2) is read-only
3) has a disk cache state that indicates we need to recreate the cache
AND the file system has enough free space fragmentation such that the
request for an extent of a given size can't be honored;
AND have a single CPU core;
AND it's the block group with the highest starting offset such that
there are no opportunities (like reading from disk) for the loop to
yield the CPU;
We can end up with a lockup.
The root cause is simple. Once we're in the position that we've read in
all of the other block groups directly and none of those block groups
can honor the request, there are no more opportunities to sleep. We end
up trying to start a caching thread which never gets run if we only have
one core. This *should* present as a hung task waiting on the caching
thread to make some progress, but it doesn't. Instead, it degrades into
a busy loop because of the placement of the read-only check.
During the first pass through the loop, block_group->cached will be set
to BTRFS_CACHE_STARTED and have_caching_bg will be set. Then we hit the
read-only check and short circuit the loop. We're not yet in
LOOP_CACHING_WAIT, so we skip that loop back before going through the
loop again for other raid groups.
Then we move to LOOP_CACHING_WAIT state.
During the this pass through the loop, ->cached will still be
BTRFS_CACHE_STARTED, which means it's not cached, so we'll enter
cache_block_group, do a lot of nothing, and return, and also set
have_caching_bg again. Then we hit the read-only check and short circuit
the loop. The same thing happens as before except now we DO trigger
the LOOP_CACHING_WAIT && have_caching_bg check and loop back up to the
top. We do this forever.
There are two fixes in this patch since they address the same underlying
bug.
The first is to add a cond_resched to the end of the loop to ensure
that the caching thread always has an opportunity to run. This will
fix the soft lockup issue, but find_free_extent will still loop doing
nothing until the thread has completed.
The second is to move the read-only check to the top of the loop. We're
never going to return an allocation within a read-only block group so
we may as well skip it early. The check for ->cached == BTRFS_CACHE_ERROR
would cause the same problem except that BTRFS_CACHE_ERROR is considered
a "done" state and we won't re-set have_caching_bg again.
Many thanks to Stephan Kulow <coolo@suse.de> for his excellent help in
the testing process.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We were passing an incorrect slot number to the function that validates
directory items when we are replaying xattr deletes from a log tree. The
correct slot is stored at variable 'i' and not at 'path->slots[0]', so
the call to the validation function was only correct for the first
iteration of the loop, when 'i == path->slots[0]'.
After this fix, the fstest generic/066 passes again.
Fixes: 8ee8c2d62d ("btrfs: Verify dir_item in replay_xattr_deletes")
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Firstly by applying the following with coccinelle's spatch:
@@ expression SB; @@
-SB->s_flags & MS_RDONLY
+sb_rdonly(SB)
to effect the conversion to sb_rdonly(sb), then by applying:
@@ expression A, SB; @@
(
-(!sb_rdonly(SB)) && A
+!sb_rdonly(SB) && A
|
-A != (sb_rdonly(SB))
+A != sb_rdonly(SB)
|
-A == (sb_rdonly(SB))
+A == sb_rdonly(SB)
|
-!(sb_rdonly(SB))
+!sb_rdonly(SB)
|
-A && (sb_rdonly(SB))
+A && sb_rdonly(SB)
|
-A || (sb_rdonly(SB))
+A || sb_rdonly(SB)
|
-(sb_rdonly(SB)) != A
+sb_rdonly(SB) != A
|
-(sb_rdonly(SB)) == A
+sb_rdonly(SB) == A
|
-(sb_rdonly(SB)) && A
+sb_rdonly(SB) && A
|
-(sb_rdonly(SB)) || A
+sb_rdonly(SB) || A
)
@@ expression A, B, SB; @@
(
-(sb_rdonly(SB)) ? 1 : 0
+sb_rdonly(SB)
|
-(sb_rdonly(SB)) ? A : B
+sb_rdonly(SB) ? A : B
)
to remove left over excess bracketage and finally by applying:
@@ expression A, SB; @@
(
-(A & MS_RDONLY) != sb_rdonly(SB)
+(bool)(A & MS_RDONLY) != sb_rdonly(SB)
|
-(A & MS_RDONLY) == sb_rdonly(SB)
+(bool)(A & MS_RDONLY) == sb_rdonly(SB)
)
to make comparisons against the result of sb_rdonly() (which is a bool)
work correctly.
Signed-off-by: David Howells <dhowells@redhat.com>
Pull ->s_options removal from Al Viro:
"Preparations for fsmount/fsopen stuff (coming next cycle). Everything
gets moved to explicit ->show_options(), killing ->s_options off +
some cosmetic bits around fs/namespace.c and friends. Basically, the
stuff needed to work with fsmount series with minimum of conflicts
with other work.
It's not strictly required for this merge window, but it would reduce
the PITA during the coming cycle, so it would be nice to have those
bits and pieces out of the way"
* 'work.mount' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
isofs: Fix isofs_show_options()
VFS: Kill off s_options and helpers
orangefs: Implement show_options
9p: Implement show_options
isofs: Implement show_options
afs: Implement show_options
affs: Implement show_options
befs: Implement show_options
spufs: Implement show_options
bpf: Implement show_options
ramfs: Implement show_options
pstore: Implement show_options
omfs: Implement show_options
hugetlbfs: Implement show_options
VFS: Don't use save/replace_mount_options if not using generic_show_options
VFS: Provide empty name qstr
VFS: Make get_filesystem() return the affected filesystem
VFS: Clean up whitespace in fs/namespace.c and fs/super.c
Provide a function to create a NUL-terminated string from unterminated data
Pull btrfs fixes from David Sterba:
"We've identified and fixed a silent corruption (introduced by code in
the first pull), a fixup after the blk_status_t merge and two fixes to
incremental send that Filipe has been hunting for some time"
* 'for-4.13-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
Btrfs: fix unexpected return value of bio_readpage_error
btrfs: btrfs_create_repair_bio never fails, skip error handling
btrfs: cloned bios must not be iterated by bio_for_each_segment_all
Btrfs: fix write corruption due to bio cloning on raid5/6
Btrfs: incremental send, fix invalid memory access
Btrfs: incremental send, fix invalid path for link commands
With blk_status_t conversion (that are now present in master),
bio_readpage_error() may return 1 as now ->submit_bio_hook() may not set
%ret if it runs without problems.
This fixes that unexpected return value by changing
btrfs_check_repairable() to return a bool instead of updating %ret, and
patch is applicable to both codebases with and without blk_status_t.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
As the function uses the non-failing bio allocation, we can remove error
handling from the callers as well.
Signed-off-by: David Sterba <dsterba@suse.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We've started using cloned bios more in 4.13, there are some specifics
regarding the iteration. Filipe found [1] that the raid56 iterated a
cloned bio using bio_for_each_segment_all, which is incorrect. The
cloned bios have wrong bi_vcnt and this could lead to silent
corruptions. This patch adds assertions to all remaining
bio_for_each_segment_all cases.
[1] https://patchwork.kernel.org/patch/9838535/
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Pull btrfs fix from David Sterba:
"This fixes a user-visible bug introduced by the nowait-aio patches
merged in this cycle"
* 'nowait-aio-btrfs-fixup' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: nowait aio: Correct assignment of pos
Assigning pos for usage early messes up in append mode, where the pos is
re-assigned in generic_write_checks(). Assign pos later to get the
correct position to write from iocb->ki_pos.
Since check_can_nocow also uses the value of pos, we shift
generic_write_checks() before check_can_nocow(). Checks with IOCB_DIRECT
are present in generic_write_checks(), so checking for IOCB_NOWAIT is
enough.
Also, put locking sequence in the fast path.
This fixes a user visible bug, as reported:
"apparently breaks several shell related features on my system.
In zsh history stopped working, because no new entries are added
anymore.
I fist noticed the issue when I tried to build mplayer. It uses a shell
script to generate a help_mp.h file:
[...]
Here is a simple testcase:
% echo "foo" >> test
% echo "foo" >> test
% cat test
foo
%
"
Fixes: edf064e7c6 ("btrfs: nowait aio support")
CC: Jens Axboe <axboe@kernel.dk>
Reported-by: Markus Trippelsdorf <markus@trippelsdorf.de>
Link: https://lkml.kernel.org/r/20170704042306.GA274@x4
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
-----BEGIN PGP SIGNATURE-----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=3Z93
-----END PGP SIGNATURE-----
Merge tag 'for-linus-v4.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux
Pull Writeback error handling updates from Jeff Layton:
"This pile represents the bulk of the writeback error handling fixes
that I have for this cycle. Some of the earlier patches in this pile
may look trivial but they are prerequisites for later patches in the
series.
The aim of this set is to improve how we track and report writeback
errors to userland. Most applications that care about data integrity
will periodically call fsync/fdatasync/msync to ensure that their
writes have made it to the backing store.
For a very long time, we have tracked writeback errors using two flags
in the address_space: AS_EIO and AS_ENOSPC. Those flags are set when a
writeback error occurs (via mapping_set_error) and are cleared as a
side-effect of filemap_check_errors (as you noted yesterday). This
model really sucks for userland.
Only the first task to call fsync (or msync or fdatasync) will see the
error. Any subsequent task calling fsync on a file will get back 0
(unless another writeback error occurs in the interim). If I have
several tasks writing to a file and calling fsync to ensure that their
writes got stored, then I need to have them coordinate with one
another. That's difficult enough, but in a world of containerized
setups that coordination may even not be possible.
But wait...it gets worse!
The calls to filemap_check_errors can be buried pretty far down in the
call stack, and there are internal callers of filemap_write_and_wait
and the like that also end up clearing those errors. Many of those
callers ignore the error return from that function or return it to
userland at nonsensical times (e.g. truncate() or stat()). If I get
back -EIO on a truncate, there is no reason to think that it was
because some previous writeback failed, and a subsequent fsync() will
(incorrectly) return 0.
This pile aims to do three things:
1) ensure that when a writeback error occurs that that error will be
reported to userland on a subsequent fsync/fdatasync/msync call,
regardless of what internal callers are doing
2) report writeback errors on all file descriptions that were open at
the time that the error occurred. This is a user-visible change,
but I think most applications are written to assume this behavior
anyway. Those that aren't are unlikely to be hurt by it.
3) document what filesystems should do when there is a writeback
error. Today, there is very little consistency between them, and a
lot of cargo-cult copying. We need to make it very clear what
filesystems should do in this situation.
To achieve this, the set adds a new data type (errseq_t) and then
builds new writeback error tracking infrastructure around that. Once
all of that is in place, we change the filesystems to use the new
infrastructure for reporting wb errors to userland.
Note that this is just the initial foray into cleaning up this mess.
There is a lot of work remaining here:
1) convert the rest of the filesystems in a similar fashion. Once the
initial set is in, then I think most other fs' will be fairly
simple to convert. Hopefully most of those can in via individual
filesystem trees.
2) convert internal waiters on writeback to use errseq_t for
detecting errors instead of relying on the AS_* flags. I have some
draft patches for this for ext4, but they are not quite ready for
prime time yet.
This was a discussion topic this year at LSF/MM too. If you're
interested in the gory details, LWN has some good articles about this:
https://lwn.net/Articles/718734/https://lwn.net/Articles/724307/"
* tag 'for-linus-v4.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux:
btrfs: minimal conversion to errseq_t writeback error reporting on fsync
xfs: minimal conversion to errseq_t writeback error reporting
ext4: use errseq_t based error handling for reporting data writeback errors
fs: convert __generic_file_fsync to use errseq_t based reporting
block: convert to errseq_t based writeback error tracking
dax: set errors in mapping when writeback fails
Documentation: flesh out the section in vfs.txt on storing and reporting writeback errors
mm: set both AS_EIO/AS_ENOSPC and errseq_t in mapping_set_error
fs: new infrastructure for writeback error handling and reporting
lib: add errseq_t type and infrastructure for handling it
mm: don't TestClearPageError in __filemap_fdatawait_range
mm: clear AS_EIO/AS_ENOSPC when writeback initiation fails
jbd2: don't clear and reset errors after waiting on writeback
buffer: set errors in mapping at the time that the error occurs
fs: check for writeback errors after syncing out buffers in generic_file_fsync
buffer: use mapping_set_error instead of setting the flag
mm: fix mapping_set_error call in me_pagecache_dirty
When doing an incremental send, while processing an extent that changed
between the parent and send snapshots and that extent was an inline extent
in the parent snapshot, it's possible to access a memory region beyond
the end of leaf if the inline extent is very small and it is the first
item in a leaf.
An example scenario is described below.
The send snapshot has the following leaf:
leaf 33865728 items 33 free space 773 generation 46 owner 5
fs uuid ab7090d8-dafd-4fb9-9246-723b6d2e2fb7
chunk uuid 2d16478c-c704-4ab9-b574-68bff2281b1f
(...)
item 14 key (335 EXTENT_DATA 0) itemoff 3052 itemsize 53
generation 36 type 1 (regular)
extent data disk byte 12791808 nr 4096
extent data offset 0 nr 4096 ram 4096
extent compression 0 (none)
item 15 key (335 EXTENT_DATA 8192) itemoff 2999 itemsize 53
generation 36 type 1 (regular)
extent data disk byte 138170368 nr 225280
extent data offset 0 nr 225280 ram 225280
extent compression 0 (none)
(...)
And the parent snapshot has the following leaf:
leaf 31272960 items 17 free space 17 generation 31 owner 5
fs uuid ab7090d8-dafd-4fb9-9246-723b6d2e2fb7
chunk uuid 2d16478c-c704-4ab9-b574-68bff2281b1f
item 0 key (335 EXTENT_DATA 0) itemoff 3951 itemsize 44
generation 31 type 0 (inline)
inline extent data size 23 ram_bytes 613 compression 1 (zlib)
(...)
When computing the send stream, it is detected that the extent of inode
335, at file offset 0, and at fs/btrfs/send.c:is_extent_unchanged() we
grab the leaf from the parent snapshot and access the inline extent item.
However, before jumping to the 'out' label, we access the 'offset' and
'disk_bytenr' fields of the extent item, which should not be done for
inline extents since the inlined data starts at the offset of the
'disk_bytenr' field and can be very small. For example accessing the
'offset' field of the file extent item results in the following trace:
[ 599.705368] general protection fault: 0000 [#1] PREEMPT SMP
[ 599.706296] Modules linked in: btrfs psmouse i2c_piix4 ppdev acpi_cpufreq serio_raw parport_pc i2c_core evdev tpm_tis tpm_tis_core sg pcspkr parport tpm button su$
[ 599.709340] CPU: 7 PID: 5283 Comm: btrfs Not tainted 4.10.0-rc8-btrfs-next-46+ #1
[ 599.709340] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.1-0-gb3ef39f-prebuilt.qemu-project.org 04/01/2014
[ 599.709340] task: ffff88023eedd040 task.stack: ffffc90006658000
[ 599.709340] RIP: 0010:read_extent_buffer+0xdb/0xf4 [btrfs]
[ 599.709340] RSP: 0018:ffffc9000665ba00 EFLAGS: 00010286
[ 599.709340] RAX: db73880000000000 RBX: 0000000000000000 RCX: 0000000000000001
[ 599.709340] RDX: ffffc9000665ba60 RSI: db73880000000000 RDI: ffffc9000665ba5f
[ 599.709340] RBP: ffffc9000665ba30 R08: 0000000000000001 R09: ffff88020dc5e098
[ 599.709340] R10: 0000000000001000 R11: 0000160000000000 R12: 6db6db6db6db6db7
[ 599.709340] R13: ffff880000000000 R14: 0000000000000000 R15: ffff88020dc5e088
[ 599.709340] FS: 00007f519555a8c0(0000) GS:ffff88023f3c0000(0000) knlGS:0000000000000000
[ 599.709340] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 599.709340] CR2: 00007f1411afd000 CR3: 0000000235f8e000 CR4: 00000000000006e0
[ 599.709340] Call Trace:
[ 599.709340] btrfs_get_token_64+0x93/0xce [btrfs]
[ 599.709340] ? printk+0x48/0x50
[ 599.709340] btrfs_get_64+0xb/0xd [btrfs]
[ 599.709340] process_extent+0x3a1/0x1106 [btrfs]
[ 599.709340] ? btree_read_extent_buffer_pages+0x5/0xef [btrfs]
[ 599.709340] changed_cb+0xb03/0xb3d [btrfs]
[ 599.709340] ? btrfs_get_token_32+0x7a/0xcc [btrfs]
[ 599.709340] btrfs_compare_trees+0x432/0x53d [btrfs]
[ 599.709340] ? process_extent+0x1106/0x1106 [btrfs]
[ 599.709340] btrfs_ioctl_send+0x960/0xe26 [btrfs]
[ 599.709340] btrfs_ioctl+0x181b/0x1fed [btrfs]
[ 599.709340] ? trace_hardirqs_on_caller+0x150/0x1ac
[ 599.709340] vfs_ioctl+0x21/0x38
[ 599.709340] ? vfs_ioctl+0x21/0x38
[ 599.709340] do_vfs_ioctl+0x611/0x645
[ 599.709340] ? rcu_read_unlock+0x5b/0x5d
[ 599.709340] ? __fget+0x6d/0x79
[ 599.709340] SyS_ioctl+0x57/0x7b
[ 599.709340] entry_SYSCALL_64_fastpath+0x18/0xad
[ 599.709340] RIP: 0033:0x7f51945eec47
[ 599.709340] RSP: 002b:00007ffc21c13e98 EFLAGS: 00000202 ORIG_RAX: 0000000000000010
[ 599.709340] RAX: ffffffffffffffda RBX: ffffffff81096459 RCX: 00007f51945eec47
[ 599.709340] RDX: 00007ffc21c13f20 RSI: 0000000040489426 RDI: 0000000000000004
[ 599.709340] RBP: ffffc9000665bf98 R08: 00007f519450d700 R09: 00007f519450d700
[ 599.709340] R10: 00007f519450d9d0 R11: 0000000000000202 R12: 0000000000000046
[ 599.709340] R13: ffffc9000665bf78 R14: 0000000000000000 R15: 00007f5195574040
[ 599.709340] ? trace_hardirqs_off_caller+0x43/0xb1
[ 599.709340] Code: 29 f0 49 39 d8 4c 0f 47 c3 49 03 81 58 01 00 00 44 89 c1 4c 01 c2 4c 29 c3 48 c1 f8 03 49 0f af c4 48 c1 e0 0c 4c 01 e8 48 01 c6 <f3> a4 31 f6 4$
[ 599.709340] RIP: read_extent_buffer+0xdb/0xf4 [btrfs] RSP: ffffc9000665ba00
[ 599.762057] ---[ end trace fe00d7af61b9f49e ]---
This is because the 'offset' field starts at an offset of 37 bytes
(offsetof(struct btrfs_file_extent_item, offset)), has a length of 8
bytes and therefore attemping to read it causes a 1 byte access beyond
the end of the leaf, as the first item's content in a leaf is located
at the tail of the leaf, the item size is 44 bytes and the offset of
that field plus its length (37 + 8 = 45) goes beyond the item's size
by 1 byte.
So fix this by accessing the 'offset' and 'disk_bytenr' fields after
jumping to the 'out' label if we are processing an inline extent. We
move the reading operation of the 'disk_bytenr' field too because we
have the same problem as for the 'offset' field explained above when
the inline data is less then 8 bytes. The access to the 'generation'
field is also moved but just for the sake of grouping access to all
the fields.
Fixes: e1cbfd7bf6 ("Btrfs: send, fix file hole not being preserved due to inline extent")
Cc: <stable@vger.kernel.org> # v4.12+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
In some scenarios an incremental send stream can contain link commands
with an invalid target path. Such scenarios happen after moving some
directory inode A, renaming a regular file inode B into the old name of
inode A and finally creating a new hard link for inode B at directory
inode A.
Consider the following example scenario where this issue happens.
Parent snapshot:
. (ino 256)
|
|--- dir1/ (ino 257)
| |--- dir2/ (ino 258)
| |--- dir3/ (ino 259)
| |--- file1 (ino 261)
| |--- dir4/ (ino 262)
|
|--- dir5/ (ino 260)
Send snapshot:
. (ino 256)
|
|--- dir1/ (ino 257)
|--- dir2/ (ino 258)
| |--- dir3/ (ino 259)
| |--- dir4 (ino 261)
|
|--- dir6/ (ino 263)
|--- dir44/ (ino 262)
|--- file11 (ino 261)
|--- dir55/ (ino 260)
When attempting to apply the corresponding incremental send stream, a
link command contains an invalid target path which makes the receiver
fail. The following is the verbose output of the btrfs receive command:
receiving snapshot mysnap2 uuid=90076fe6-5ba6-e64a-9321-9279670ed16b (...)
utimes
utimes dir1
utimes dir1/dir2/dir3
utimes
rename dir1/dir2/dir3/dir4 -> o262-7-0
link dir1/dir2/dir3/dir4 -> dir1/dir2/dir3/file1
link dir1/dir2/dir3/dir4/file11 -> dir1/dir2/dir3/file1
ERROR: link dir1/dir2/dir3/dir4/file11 -> dir1/dir2/dir3/file1 failed: Not a directory
The following steps happen during the computation of the incremental send
stream the lead to this issue:
1) When processing inode 261, we orphanize inode 262 due to a name/location
collision with one of the new hard links for inode 261 (created in the
second step below).
2) We create one of the 2 new hard links for inode 261, the one whose
location is at "dir1/dir2/dir3/dir4".
3) We then attempt to create the other new hard link for inode 261, which
has inode 262 as its parent directory. Because the path for this new
hard link was computed before we started processing the new references
(hard links), it reflects the old name/location of inode 262, that is,
it does not account for the orphanization step that happened when
we started processing the new references for inode 261, whence it is
no longer valid, causing the receiver to fail.
So fix this issue by recomputing the full path of new references if we
ended up orphanizing other inodes which are directories.
A test case for fstests follows soon.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Pull percpu updates from Tejun Heo:
"These are the percpu changes for the v4.13-rc1 merge window. There are
a couple visibility related changes - tracepoints and allocator stats
through debugfs, along with __ro_after_init markings and a cosmetic
rename in percpu_counter.
Please note that the simple O(#elements_in_the_chunk) area allocator
used by percpu allocator is again showing scalability issues,
primarily with bpf allocating and freeing large number of counters.
Dennis is working on the replacement allocator and the percpu
allocator will be seeing increased churns in the coming cycles"
* 'for-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu:
percpu: fix static checker warnings in pcpu_destroy_chunk
percpu: fix early calls for spinlock in pcpu_stats
percpu: resolve err may not be initialized in pcpu_alloc
percpu_counter: Rename __percpu_counter_add to percpu_counter_add_batch
percpu: add tracepoint support for percpu memory
percpu: expose statistics about percpu memory via debugfs
percpu: migrate percpu data structures to internal header
percpu: add missing lockdep_assert_held to func pcpu_free_area
mark most percpu globals as __ro_after_init
Just check and advance the errseq_t in the file before returning, and
use an errseq_t based check for writeback errors.
Other internal callers of filemap_* functions are left as-is.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
btrfs, debugfs, reiserfs and tracefs call save_mount_options() and reiserfs
calls replace_mount_options(), but they then implement their own
->show_options() methods and don't touch s_options, rendering the saved
options unnecessary. I'm trying to eliminate s_options to make it easier
to implement a context-based mount where the mount options can be passed
individually over a file descriptor.
Remove the calls to save/replace_mount_options() call in these cases.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Chris Mason <clm@fb.com>
cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
cc: Steven Rostedt <rostedt@goodmis.org>
cc: linux-btrfs@vger.kernel.org
cc: reiserfs-devel@vger.kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Pull btrfs updates from David Sterba:
"The core updates improve error handling (mostly related to bios), with
the usual incremental work on the GFP_NOFS (mis)use removal,
refactoring or cleanups. Except the two top patches, all have been in
for-next for an extensive amount of time.
User visible changes:
- statx support
- quota override tunable
- improved compression thresholds
- obsoleted mount option alloc_start
Core updates:
- bio-related updates:
- faster bio cloning
- no allocation failures
- preallocated flush bios
- more kvzalloc use, memalloc_nofs protections, GFP_NOFS updates
- prep work for btree_inode removal
- dir-item validation
- qgoup fixes and updates
- cleanups:
- removed unused struct members, unused code, refactoring
- argument refactoring (fs_info/root, caller -> callee sink)
- SEARCH_TREE ioctl docs"
* 'for-4.13-part1' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (115 commits)
btrfs: Remove false alert when fiemap range is smaller than on-disk extent
btrfs: Don't clear SGID when inheriting ACLs
btrfs: fix integer overflow in calc_reclaim_items_nr
btrfs: scrub: fix target device intialization while setting up scrub context
btrfs: qgroup: Fix qgroup reserved space underflow by only freeing reserved ranges
btrfs: qgroup: Introduce extent changeset for qgroup reserve functions
btrfs: qgroup: Fix qgroup reserved space underflow caused by buffered write and quotas being enabled
btrfs: qgroup: Return actually freed bytes for qgroup release or free data
btrfs: qgroup: Cleanup btrfs_qgroup_prepare_account_extents function
btrfs: qgroup: Add quick exit for non-fs extents
Btrfs: rework delayed ref total_bytes_pinned accounting
Btrfs: return old and new total ref mods when adding delayed refs
Btrfs: always account pinned bytes when dropping a tree block ref
Btrfs: update total_bytes_pinned when pinning down extents
Btrfs: make BUG_ON() in add_pinned_bytes() an ASSERT()
Btrfs: make add_pinned_bytes() take an s64 num_bytes instead of u64
btrfs: fix validation of XATTR_ITEM dir items
btrfs: Verify dir_item in iterate_object_props
btrfs: Check name_len before in btrfs_del_root_ref
btrfs: Check name_len before reading btrfs_get_name
...
Pull core block/IO updates from Jens Axboe:
"This is the main pull request for the block layer for 4.13. Not a huge
round in terms of features, but there's a lot of churn related to some
core cleanups.
Note this depends on the UUID tree pull request, that Christoph
already sent out.
This pull request contains:
- A series from Christoph, unifying the error/stats codes in the
block layer. We now use blk_status_t everywhere, instead of using
different schemes for different places.
- Also from Christoph, some cleanups around request allocation and IO
scheduler interactions in blk-mq.
- And yet another series from Christoph, cleaning up how we handle
and do bounce buffering in the block layer.
- A blk-mq debugfs series from Bart, further improving on the support
we have for exporting internal information to aid debugging IO
hangs or stalls.
- Also from Bart, a series that cleans up the request initialization
differences across types of devices.
- A series from Goldwyn Rodrigues, allowing the block layer to return
failure if we will block and the user asked for non-blocking.
- Patch from Hannes for supporting setting loop devices block size to
that of the underlying device.
- Two series of patches from Javier, fixing various issues with
lightnvm, particular around pblk.
- A series from me, adding support for write hints. This comes with
NVMe support as well, so applications can help guide data placement
on flash to improve performance, latencies, and write
amplification.
- A series from Ming, improving and hardening blk-mq support for
stopping/starting and quiescing hardware queues.
- Two pull requests for NVMe updates. Nothing major on the feature
side, but lots of cleanups and bug fixes. From the usual crew.
- A series from Neil Brown, greatly improving the bio rescue set
support. Most notably, this kills the bio rescue work queues, if we
don't really need them.
- Lots of other little bug fixes that are all over the place"
* 'for-4.13/block' of git://git.kernel.dk/linux-block: (217 commits)
lightnvm: pblk: set line bitmap check under debug
lightnvm: pblk: verify that cache read is still valid
lightnvm: pblk: add initialization check
lightnvm: pblk: remove target using async. I/Os
lightnvm: pblk: use vmalloc for GC data buffer
lightnvm: pblk: use right metadata buffer for recovery
lightnvm: pblk: schedule if data is not ready
lightnvm: pblk: remove unused return variable
lightnvm: pblk: fix double-free on pblk init
lightnvm: pblk: fix bad le64 assignations
nvme: Makefile: remove dead build rule
blk-mq: map all HWQ also in hyperthreaded system
nvmet-rdma: register ib_client to not deadlock in device removal
nvme_fc: fix error recovery on link down.
nvmet_fc: fix crashes on bad opcodes
nvme_fc: Fix crash when nvme controller connection fails.
nvme_fc: replace ioabort msleep loop with completion
nvme_fc: fix double calls to nvme_cleanup_cmd()
nvme-fabrics: verify that a controller returns the correct NQN
nvme: simplify nvme_dev_attrs_are_visible
...
Commit 4751832da9 ("btrfs: fiemap: Cache and merge fiemap extent before
submit it to user") introduced a warning to catch unemitted cached
fiemap extent.
However such warning doesn't take the following case into consideration:
0 4K 8K
|<---- fiemap range --->|
|<----------- On-disk extent ------------------>|
In this case, the whole 0~8K is cached, and since it's larger than
fiemap range, it break the fiemap extent emit loop.
This leaves the fiemap extent cached but not emitted, and caught by the
final fiemap extent sanity check, causing kernel warning.
This patch removes the kernel warning and renames the sanity check to
emit_last_fiemap_cache() since it's possible and valid to have cached
fiemap extent.
Reported-by: David Sterba <dsterba@suse.cz>
Reported-by: Adam Borowski <kilobyte@angband.pl>
Fixes: 4751832da9 ("btrfs: fiemap: Cache and merge fiemap extent ...")
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When new directory 'DIR1' is created in a directory 'DIR0' with SGID bit
set, DIR1 is expected to have SGID bit set (and owning group equal to
the owning group of 'DIR0'). However when 'DIR0' also has some default
ACLs that 'DIR1' inherits, setting these ACLs will result in SGID bit on
'DIR1' to get cleared if user is not member of the owning group.
Fix the problem by moving posix_acl_update_mode() out of
__btrfs_set_acl() into btrfs_set_acl(). That way the function will not be
called when inheriting ACLs which is what we want as it prevents SGID
bit clearing and the mode has been properly set by posix_acl_create()
anyway.
Fixes: 073931017b
CC: stable@vger.kernel.org
CC: linux-btrfs@vger.kernel.org
CC: David Sterba <dsterba@suse.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: David Sterba <dsterba@suse.com>
Dave Jones hit a WARN_ON(nr < 0) in btrfs_wait_ordered_roots() with
v4.12-rc6. This was because commit 70e7af244 made it possible for
calc_reclaim_items_nr() to return a negative number. It's not really a
bug in that commit, it just didn't go far enough down the stack to find
all the possible 64->32 bit overflows.
This switches calc_reclaim_items_nr() to return a u64 and changes everyone
that uses the results of that math to u64 as well.
Reported-by: Dave Jones <davej@codemonkey.org.uk>
Fixes: 70e7af2 ("Btrfs: fix delalloc accounting leak caused by u32 overflow")
Signed-off-by: Chris Mason <clm@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The commit "btrfs: scrub: inline helper scrub_setup_wr_ctx" inlined a
helper but wrongly sets up the target device. Incidentally there's a
local variable with the same name as a parameter in the previous
function, so this got caught during runtime as crash in test btrfs/027.
Reported-by: Chris Mason <clm@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[BUG]
For the following case, btrfs can underflow qgroup reserved space
at an error path:
(Page size 4K, function name without "btrfs_" prefix)
Task A | Task B
----------------------------------------------------------------------
Buffered_write [0, 2K) |
|- check_data_free_space() |
| |- qgroup_reserve_data() |
| Range aligned to page |
| range [0, 4K) <<< |
| 4K bytes reserved <<< |
|- copy pages to page cache |
| Buffered_write [2K, 4K)
| |- check_data_free_space()
| | |- qgroup_reserved_data()
| | Range alinged to page
| | range [0, 4K)
| | Already reserved by A <<<
| | 0 bytes reserved <<<
| |- delalloc_reserve_metadata()
| | And it *FAILED* (Maybe EQUOTA)
| |- free_reserved_data_space()
|- qgroup_free_data()
Range aligned to page range
[0, 4K)
Freeing 4K
(Special thanks to Chandan for the detailed report and analyse)
[CAUSE]
Above Task B is freeing reserved data range [0, 4K) which is actually
reserved by Task A.
And at writeback time, page dirty by Task A will go through writeback
routine, which will free 4K reserved data space at file extent insert
time, causing the qgroup underflow.
[FIX]
For btrfs_qgroup_free_data(), add @reserved parameter to only free
data ranges reserved by previous btrfs_qgroup_reserve_data().
So in above case, Task B will try to free 0 byte, so no underflow.
Reported-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Reviewed-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Tested-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Introduce a new parameter, struct extent_changeset for
btrfs_qgroup_reserved_data() and its callers.
Such extent_changeset was used in btrfs_qgroup_reserve_data() to record
which range it reserved in current reserve, so it can free it in error
paths.
The reason we need to export it to callers is, at buffered write error
path, without knowing what exactly which range we reserved in current
allocation, we can free space which is not reserved by us.
This will lead to qgroup reserved space underflow.
Reviewed-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[BUG]
Under the following case, we can underflow qgroup reserved space.
Task A | Task B
---------------------------------------------------------------
Quota disabled |
Buffered write |
|- btrfs_check_data_free_space() |
| *NO* qgroup space is reserved |
| since quota is *DISABLED* |
|- All pages are copied to page |
cache |
| Enable quota
| Quota scan finished
|
| Sync_fs
| |- run_delalloc_range
| |- Write pages
| |- btrfs_finish_ordered_io
| |- insert_reserved_file_extent
| |- btrfs_qgroup_release_data()
| Since no qgroup space is
reserved in Task A, we
underflow qgroup reserved
space
This can be detected by fstest btrfs/104.
[CAUSE]
In insert_reserved_file_extent() we tell qgroup to release the @ram_bytes
size of qgroup reserved_space in all cases.
And btrfs_qgroup_release_data() will check if quotas are enabled.
However in the above case, the buffered write happens before quota is
enabled, so we don't have the reserved space for that range.
[FIX]
In insert_reserved_file_extent(), we tell qgroup to release the acctual
byte number it released.
In the above case, since we don't have the reserved space, we tell
qgroups to release 0 byte, so the problem can be fixed.
And thanks to the @reserved parameter introduced by the qgroup rework,
and previous patch to return released bytes, the fix can be as small as
10 lines.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
[ changelog updates ]
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_qgroup_release/free_data() only returns 0 or a negative error
number (ENOMEM is the only possible error).
This is normally good enough, but sometimes we need the exact byte
count it freed/released.
Change it to return actually released/freed bytenr number instead of 0
for success.
And slightly modify related extent_changeset structure, since in btrfs
one no-hole data extent won't be larger than 128M, so "unsigned int"
is large enough for the use case.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Quite a lot of qgroup corruption happens due to wrong time of calling
btrfs_qgroup_prepare_account_extents().
Since the safest time is to call it just before
btrfs_qgroup_account_extents(), there is no need to separate these 2
functions.
Merging them will make code cleaner and less bug prone.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
[ changelog and comment adjustments ]
Signed-off-by: David Sterba <dsterba@suse.com>
Modify btrfs_qgroup_account_extent() to exit quicker for non-fs extents.
The quick exit condition is:
1) The extent belongs to a non-fs tree
Only fs-tree extents can affect qgroup numbers and is the only case
where extent can be shared between different trees.
Although strictly speaking extent in data-reloc or tree-reloc tree
can be shared, data/tree-reloc root won't appear in the result of
btrfs_find_all_roots(), so we can ignore such case.
So we can check the first root in old_roots/new_roots ulist.
- if we find the 1st root is a not a fs/subvol root, then we can skip
the extent
- if we find the 1st root is a fs/subvol root, then we must continue
calculation
OR
2) both 'nr_old_roots' and 'nr_new_roots' are 0
This means either such extent got allocated then freed in current
transaction or it's a new reloc tree extent, whose nr_new_roots is 0.
Either way it won't affect qgroup accounting and can be skipped
safely.
Such quick exit can make trace output more quite and less confusing:
(example with fs uuid and time stamp removed)
Before:
------
add_delayed_tree_ref: bytenr=29556736 num_bytes=16384 action=ADD_DELAYED_REF parent=0(-) ref_root=2(EXTENT_TREE) level=0 type=TREE_BLOCK_REF seq=0
btrfs_qgroup_account_extent: bytenr=29556736 num_bytes=16384 nr_old_roots=0 nr_new_roots=1
------
Extent tree block will trigger btrfs_qgroup_account_extent() trace point
while no qgroup number is changed, as extent tree won't affect qgroup
accounting.
After:
------
add_delayed_tree_ref: bytenr=29556736 num_bytes=16384 action=ADD_DELAYED_REF parent=0(-) ref_root=2(EXTENT_TREE) level=0 type=TREE_BLOCK_REF seq=0
------
Now such unrelated extent won't trigger btrfs_qgroup_account_extent()
trace point, making the trace less noisy.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
[ changelog and comment adjustments ]
Signed-off-by: David Sterba <dsterba@suse.com>
The total_bytes_pinned counter is completely broken when accounting
delayed refs:
- If two drops for the same extent are merged, we will decrement
total_bytes_pinned twice but only increment it once.
- If an add is merged into a drop or vice versa, we will decrement the
total_bytes_pinned counter but never increment it.
- If multiple references to an extent are dropped, we will account it
multiple times, potentially vastly over-estimating the number of bytes
that will be freed by a commit and doing unnecessary work when we're
close to ENOSPC.
The last issue is relatively minor, but the first two make the
total_bytes_pinned counter leak or underflow very often. These
accounting issues were introduced in b150a4f10d ("Btrfs: use a percpu
to keep track of possibly pinned bytes"), but they were papered over by
zeroing out the counter on every commit until d288db5dc0 ("Btrfs: fix
race of using total_bytes_pinned").
We need to make sure that an extent is accounted as pinned exactly once
if and only if we will drop references to it when when the transaction
is committed. Ideally we would only add to total_bytes_pinned when the
*last* reference is dropped, but this information isn't readily
available for data extents. Again, this over-estimation can lead to
extra commits when we're close to ENOSPC, but it's not as bad as before.
The fix implemented here is to increment total_bytes_pinned when the
total refmod count for an extent goes negative and decrement it if the
refmod count goes back to non-negative or after we've run all of the
delayed refs for that extent.
Signed-off-by: Omar Sandoval <osandov@fb.com>
Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We need this to decide when to account pinned bytes.
Signed-off-by: Omar Sandoval <osandov@fb.com>
Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently, we only increment total_bytes_pinned in
btrfs_free_tree_block() when dropping the last reference on the block.
However, when the delayed ref is run later, we will decrement
total_bytes_pinned regardless of whether it was the last reference or
not. This causes the counter to underflow when the reference we dropped
was not the last reference. Fix it by incrementing the counter
unconditionally, which is what btrfs_free_extent() does. This makes
total_bytes_pinned an overestimate when references to shared extents are
dropped, but in the worst case this will just make us try to commit the
transaction to try to free up space and find we didn't free enough.
Signed-off-by: Omar Sandoval <osandov@fb.com>
Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The extents marked in pin_down_extent() will be unpinned later in
unpin_extent_range(), which decrements total_bytes_pinned.
pin_down_extent() must increment the counter to avoid underflowing it.
Also adjust btrfs_free_tree_block() to avoid accounting for the same
extent twice.
Signed-off-by: Omar Sandoval <osandov@fb.com>
Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The value of flags is one of DATA/METADATA/SYSTEM, they must exist at
when add_pinned_bytes is called.
Signed-off-by: Omar Sandoval <osandov@fb.com>
Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ added changelog ]
Signed-off-by: David Sterba <dsterba@suse.com>
There are a few places where we pass in a negative num_bytes, so make it
signed for clarity. Also move it up in the file since later patches will
need it there.
Signed-off-by: Omar Sandoval <osandov@fb.com>
Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The XATTR_ITEM is a type of a directory item so we use the common
validator helper. Unlike other dir items, it can have data. The way the
name len validation is currently implemented does not reflect that. We'd
have to adjust by the data_len when comparing the read and item limits.
However, this will not work for multi-item xattr dir items.
Example from tree dump of generic/337:
item 7 key (257 XATTR_ITEM 751495445) itemoff 15667 itemsize 147
location key (0 UNKNOWN.0 0) type XATTR
transid 8 data_len 3 name_len 11
name: user.foobar
data 123
location key (0 UNKNOWN.0 0) type XATTR
transid 8 data_len 6 name_len 13
name: user.WvG1c1Td
data qwerty
location key (0 UNKNOWN.0 0) type XATTR
transid 8 data_len 5 name_len 19
name: user.J3__T_Km3dVsW_
data hello
At the point of btrfs_is_name_len_valid call we don't have access to the
data_len value of the 2nd and 3rd sub-item. So simple btrfs_dir_data_len(leaf,
di) would always return 3, although we'd need to get 6 and 5 respectively to
get the claculations right. (read_end + name_len + data_len vs item_end)
We'd have to also pass data_len externally, which is not point of the
name validation. The last check is supposed to test if there's at least
one dir item space after the one we're processing. I don't think this is
particularly useful, validation of the next item would catch that too.
So the check is removed and we don't weaken the validation. Now tests
btrfs/048, btrfs/053, generic/273 and generic/337 pass.
Signed-off-by: David Sterba <dsterba@suse.com>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Signed-off-by: Chris Mason <clm@fb.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Call verify_dir_item before memcmp_extent_buffer reading name from
dir_item.
Signed-off-by: Su Yue <suy.fnst@cn.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_del_root_ref calls btrfs_search_slot and reads name from root_ref.
Call btrfs_is_name_len_valid before memcmp.
Signed-off-by: Su Yue <suy.fnst@cn.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In btrfs_get_name, there's btrfs_search_slot and reads name from
inode_ref/root_ref.
Call btrfs_is_name_len_valid in btrfs_get_name.
Signed-off-by: Su Yue <suy.fnst@cn.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Since iterate_dir_item checks name_len in its own way,
so use btrfs_is_name_len_valid not 'verify_dir_item' to make more strict
name_len check.
Signed-off-by: Su Yue <suy.fnst@cn.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ switched ENAMETOOLONG to EIO ]
Signed-off-by: David Sterba <dsterba@suse.com>
In btrfs_log_inode, btrfs_search_forward gets the buffer and then
btrfs_check_ref_name_override will read name from ref/extref for the
first time.
Call btrfs_is_name_len_valid before reading name.
Signed-off-by: Su Yue <suy.fnst@cn.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
replay_xattr_deletes calls btrfs_search_slot to get buffer and reads
name.
Call verify_dir_item to check name_len in replay_xattr_deletes to avoid
reading out of boundary.
Signed-off-by: Su Yue <suy.fnst@cn.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
replay_one_buffer first reads buffers and dispatches items accroding to
the item type.
In this patch, add_inode_ref handles inode_ref and inode_extref.
Then add_inode_ref calls ref_get_fields and extref_get_fields to read
ref/extref name for the first time.
So checking name_len before reading those two is fine.
add_inode_ref also calls inode_in_dir to match ref/extref in parent_dir.
The call graph includes btrfs_match_dir_item_name to read dir_item name
in the parent dir.
Checking first dir_item is not enough. Change it to verify every
dir_item while doing matches.
Signed-off-by: Su Yue <suy.fnst@cn.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Introduce function btrfs_is_name_len_valid.
The function compares parameter @name_len with item boundary then
returns true if name_len is valid.
Signed-off-by: Su Yue <suy.fnst@cn.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ s/btrfs_leaf_data/BTRFS_LEAF_DATA_OFFSET/ ]
Signed-off-by: David Sterba <dsterba@suse.com>
We should really just wait in wait_dev_flush and let the caller decide
what to do with the error value.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Similar to what submit_bio_wait does, we should account for IO while
waiting for a bio completion. This has marginal visible effects, flush
bio is short-lived.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
For devices that support flushing, we allocate a bio, submit, wait for
it and then free it. The bio allocation does not fail so ENOMEM is not a
problem but we still may unnecessarily stress the allocation subsystem.
Instead, we can allocate the bio at the same time we allocate the device
and reuse it each time we need to flush the barriers. The bio is reset
before each use. Reference counting is simplified to just device
allocation (get) and freeing (put).
The bio used to be submitted through the integrity checker which will
find out that bio has no data attached and call submit_bio.
Status of the bio in flight needs to be tracked separately in case the
device caches get switched off between write and wait.
Signed-off-by: David Sterba <dsterba@suse.com>
An incremental send can contain unlink operations with an invalid target
path when we rename some directory inode A, then rename some file inode B
to the old name of inode A and directory inode A is an ancestor of inode B
in the parent snapshot (but not anymore in the send snapshot).
Consider the following example scenario where this issue happens.
Parent snapshot:
. (ino 256)
|
|--- dir1/ (ino 257)
|--- dir2/ (ino 258)
| |--- file1 (ino 259)
| |--- file3 (ino 261)
|
|--- dir3/ (ino 262)
|--- file22 (ino 260)
|--- dir4/ (ino 263)
Send snapshot:
. (ino 256)
|
|--- dir1/ (ino 257)
|--- dir2/ (ino 258)
|--- dir3 (ino 260)
|--- file3/ (ino 262)
|--- dir4/ (ino 263)
|--- file11 (ino 269)
|--- file33 (ino 261)
When attempting to apply the corresponding incremental send stream, an
unlink operation contains an invalid path which makes the receiver fail.
The following is verbose output of the btrfs receive command:
receiving snapshot snap2 uuid=7d5450da-a573-e043-a451-ec85f4879f0f (...)
utimes
utimes dir1
utimes dir1/dir2
link dir1/dir3/dir4/file11 -> dir1/dir2/file1
unlink dir1/dir2/file1
utimes dir1/dir2
truncate dir1/dir3/dir4/file11 size=0
utimes dir1/dir3/dir4/file11
rename dir1/dir3 -> o262-7-0
link dir1/dir3 -> o262-7-0/file22
unlink dir1/dir3/file22
ERROR: unlink dir1/dir3/file22 failed. Not a directory
The following steps happen during the computation of the incremental send
stream the lead to this issue:
1) Before we start processing the new and deleted references for inode
260, we compute the full path of the deleted reference
("dir1/dir3/file22") and cache it in the list of deleted references
for our inode.
2) We then start processing the new references for inode 260, for which
there is only one new, located at "dir1/dir3". When processing this
new reference, we check that inode 262, which was not yet processed,
collides with the new reference and because of that we orphanize
inode 262 so its new full path becomes "o262-7-0".
3) After the orphanization of inode 262, we create the new reference for
inode 260 by issuing a link command with a target path of "dir1/dir3"
and a source path of "o262-7-0/file22".
4) We then start processing the deleted references for inode 260, for
which there is only one with the base name of "file22", and issue
an unlink operation containing the target path computed at step 1,
which is wrong because that path no longer exists and should be
replaced with "o262-7-0/file22".
So fix this issue by recomputing the full path of deleted references if
when we processed the new references for an inode we ended up orphanizing
any other inode that is an ancestor of our inode in the parent snapshot.
A test case for fstests follows soon.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
[ adjusted after prev patch removed fs_path::dir_path and dir_path_len ]
Signed-off-by: David Sterba <dsterba@suse.com>
Currently an incremental snapshot can generate link operations which
contain an invalid target path. Such case happens when in the send
snapshot a file was renamed, a new hard link added for it and some
other inode (with a lower number) got renamed to the former name of
that file. Example:
Parent snapshot
. (ino 256)
|
|--- f1 (ino 257)
|--- f2 (ino 258)
|--- f3 (ino 259)
Send snapshot
. (ino 256)
|
|--- f2 (ino 257)
|--- f3 (ino 258)
|--- f4 (ino 259)
|--- f5 (ino 258)
The following steps happen when computing the incremental send stream:
1) When processing inode 257, inode 258 is orphanized (renamed to
"o258-7-0"), because its current reference has the same name as the
new reference for inode 257;
2) When processing inode 258, we iterate over all its new references,
which have the names "f3" and "f5". The first iteration sees name
"f5" and renames the inode from its orphan name ("o258-7-0") to
"f5", while the second iteration sees the name "f3" and, incorrectly,
issues a link operation with a target name matching the orphan name,
which no longer exists. The first iteration had reset the current
valid path of the inode to "f5", but in the second iteration we lost
it because we found another inode, with a higher number of 259, which
has a reference named "f3" as well, so we orphanized inode 259 and
recomputed the current valid path of inode 258 to its old orphan
name because inode 259 could be an ancestor of inode 258 and therefore
the current valid path could contain the pre-orphanization name of
inode 259. However in this case inode 259 is not an ancestor of inode
258 so the current valid path should not be recomputed.
This makes the receiver fail with the following error:
ERROR: link f3 -> o258-7-0 failed: No such file or directory
So fix this by not recomputing the current valid path for an inode
whenever we find a colliding reference from some not yet processed inode
(inode number higher then the one currently being processed), unless
that other inode is an ancestor of the one we are currently processing.
A test case for fstests will follow soon.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
While punching a hole in a range that is not aligned with the sector size
(currently the same as the page size) we can end up leaving an extent map
in memory with a length that is smaller then the sector size or with a
start offset that is not aligned to the sector size. Both cases are not
expected and can lead to problems. This issue is easily detected
after the patch from commit a7e3b975a0 ("Btrfs: fix reported number of
inode blocks"), introduced in kernel 4.12-rc1, in a scenario like the
following for example:
$ mkfs.btrfs -f /dev/sdb
$ mount /dev/sdb /mnt
$ xfs_io -c "pwrite -S 0xaa -b 100K 0 100K" /mnt/foo
$ xfs_io -c "fpunch 60K 90K" /mnt/foo
$ xfs_io -c "pwrite -S 0xbb -b 100K 50K 100K" /mnt/foo
$ xfs_io -c "pwrite -S 0xcc -b 50K 100K 50K" /mnt/foo
$ umount /mnt
After the unmount operation we can see several warnings emmitted due to
underflows related to space reservation counters:
[ 2837.443299] ------------[ cut here ]------------
[ 2837.447395] WARNING: CPU: 8 PID: 2474 at fs/btrfs/inode.c:9444 btrfs_destroy_inode+0xe8/0x27e [btrfs]
[ 2837.452108] Modules linked in: dm_flakey dm_mod ppdev parport_pc psmouse parport sg pcspkr acpi_cpufreq tpm_tis tpm_tis_core i2c_piix4 i2c_core evdev tpm button se
rio_raw sunrpc loop autofs4 ext4 crc16 jbd2 mbcache btrfs raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor raid6_pq libcrc32c crc32c_gene
ric raid1 raid0 multipath linear md_mod sr_mod cdrom sd_mod ata_generic virtio_scsi ata_piix libata virtio_pci virtio_ring virtio e1000 scsi_mod floppy
[ 2837.458389] CPU: 8 PID: 2474 Comm: umount Tainted: G W 4.10.0-rc8-btrfs-next-43+ #1
[ 2837.459754] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.1-0-gb3ef39f-prebuilt.qemu-project.org 04/01/2014
[ 2837.462379] Call Trace:
[ 2837.462379] dump_stack+0x68/0x92
[ 2837.462379] __warn+0xc2/0xdd
[ 2837.462379] warn_slowpath_null+0x1d/0x1f
[ 2837.462379] btrfs_destroy_inode+0xe8/0x27e [btrfs]
[ 2837.462379] destroy_inode+0x3d/0x55
[ 2837.462379] evict+0x177/0x17e
[ 2837.462379] dispose_list+0x50/0x71
[ 2837.462379] evict_inodes+0x132/0x141
[ 2837.462379] generic_shutdown_super+0x3f/0xeb
[ 2837.462379] kill_anon_super+0x12/0x1c
[ 2837.462379] btrfs_kill_super+0x16/0x21 [btrfs]
[ 2837.462379] deactivate_locked_super+0x30/0x68
[ 2837.462379] deactivate_super+0x36/0x39
[ 2837.462379] cleanup_mnt+0x58/0x76
[ 2837.462379] __cleanup_mnt+0x12/0x14
[ 2837.462379] task_work_run+0x77/0x9b
[ 2837.462379] prepare_exit_to_usermode+0x9d/0xc5
[ 2837.462379] syscall_return_slowpath+0x196/0x1b9
[ 2837.462379] entry_SYSCALL_64_fastpath+0xab/0xad
[ 2837.462379] RIP: 0033:0x7f3ef3e6b9a7
[ 2837.462379] RSP: 002b:00007ffdd0d8de58 EFLAGS: 00000246 ORIG_RAX: 00000000000000a6
[ 2837.462379] RAX: 0000000000000000 RBX: 0000556f76a39060 RCX: 00007f3ef3e6b9a7
[ 2837.462379] RDX: 0000000000000001 RSI: 0000000000000000 RDI: 0000556f76a3f910
[ 2837.462379] RBP: 0000556f76a3f910 R08: 0000556f76a3e670 R09: 0000000000000015
[ 2837.462379] R10: 00000000000006b4 R11: 0000000000000246 R12: 00007f3ef436ce64
[ 2837.462379] R13: 0000000000000000 R14: 0000556f76a39240 R15: 00007ffdd0d8e0e0
[ 2837.519355] ---[ end trace e79345fe24b30b8d ]---
[ 2837.596256] ------------[ cut here ]------------
[ 2837.597625] WARNING: CPU: 8 PID: 2474 at fs/btrfs/extent-tree.c:5699 btrfs_free_block_groups+0x246/0x3eb [btrfs]
[ 2837.603547] Modules linked in: dm_flakey dm_mod ppdev parport_pc psmouse parport sg pcspkr acpi_cpufreq tpm_tis tpm_tis_core i2c_piix4 i2c_core evdev tpm button serio_raw sunrpc loop autofs4 ext4 crc16 jbd2 mbcache btrfs raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor raid6_pq libcrc32c crc32c_generic raid1 raid0 multipath linear md_mod sr_mod cdrom sd_mod ata_generic virtio_scsi ata_piix libata virtio_pci virtio_ring virtio e1000 scsi_mod floppy
[ 2837.659372] CPU: 8 PID: 2474 Comm: umount Tainted: G W 4.10.0-rc8-btrfs-next-43+ #1
[ 2837.663359] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.1-0-gb3ef39f-prebuilt.qemu-project.org 04/01/2014
[ 2837.663359] Call Trace:
[ 2837.663359] dump_stack+0x68/0x92
[ 2837.663359] __warn+0xc2/0xdd
[ 2837.663359] warn_slowpath_null+0x1d/0x1f
[ 2837.663359] btrfs_free_block_groups+0x246/0x3eb [btrfs]
[ 2837.663359] close_ctree+0x1dd/0x2e1 [btrfs]
[ 2837.663359] ? evict_inodes+0x132/0x141
[ 2837.663359] btrfs_put_super+0x15/0x17 [btrfs]
[ 2837.663359] generic_shutdown_super+0x6a/0xeb
[ 2837.663359] kill_anon_super+0x12/0x1c
[ 2837.663359] btrfs_kill_super+0x16/0x21 [btrfs]
[ 2837.663359] deactivate_locked_super+0x30/0x68
[ 2837.663359] deactivate_super+0x36/0x39
[ 2837.663359] cleanup_mnt+0x58/0x76
[ 2837.663359] __cleanup_mnt+0x12/0x14
[ 2837.663359] task_work_run+0x77/0x9b
[ 2837.663359] prepare_exit_to_usermode+0x9d/0xc5
[ 2837.663359] syscall_return_slowpath+0x196/0x1b9
[ 2837.663359] entry_SYSCALL_64_fastpath+0xab/0xad
[ 2837.663359] RIP: 0033:0x7f3ef3e6b9a7
[ 2837.663359] RSP: 002b:00007ffdd0d8de58 EFLAGS: 00000246 ORIG_RAX: 00000000000000a6
[ 2837.663359] RAX: 0000000000000000 RBX: 0000556f76a39060 RCX: 00007f3ef3e6b9a7
[ 2837.663359] RDX: 0000000000000001 RSI: 0000000000000000 RDI: 0000556f76a3f910
[ 2837.663359] RBP: 0000556f76a3f910 R08: 0000556f76a3e670 R09: 0000000000000015
[ 2837.663359] R10: 00000000000006b4 R11: 0000000000000246 R12: 00007f3ef436ce64
[ 2837.663359] R13: 0000000000000000 R14: 0000556f76a39240 R15: 00007ffdd0d8e0e0
[ 2837.739445] ---[ end trace e79345fe24b30b8e ]---
[ 2837.745595] ------------[ cut here ]------------
[ 2837.746412] WARNING: CPU: 8 PID: 2474 at fs/btrfs/extent-tree.c:5700 btrfs_free_block_groups+0x261/0x3eb [btrfs]
[ 2837.747955] Modules linked in: dm_flakey dm_mod ppdev parport_pc psmouse parport sg pcspkr acpi_cpufreq tpm_tis tpm_tis_core i2c_piix4 i2c_core evdev tpm button serio_raw sunrpc loop autofs4 ext4 crc16 jbd2 mbcache btrfs raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor raid6_pq libcrc32c crc32c_generic raid1 raid0 multipath linear md_mod sr_mod cdrom sd_mod ata_generic virtio_scsi ata_piix libata virtio_pci virtio_ring virtio e1000 scsi_mod floppy
[ 2837.755395] CPU: 8 PID: 2474 Comm: umount Tainted: G W 4.10.0-rc8-btrfs-next-43+ #1
[ 2837.756769] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.1-0-gb3ef39f-prebuilt.qemu-project.org 04/01/2014
[ 2837.758526] Call Trace:
[ 2837.758925] dump_stack+0x68/0x92
[ 2837.759383] __warn+0xc2/0xdd
[ 2837.759383] warn_slowpath_null+0x1d/0x1f
[ 2837.759383] btrfs_free_block_groups+0x261/0x3eb [btrfs]
[ 2837.759383] close_ctree+0x1dd/0x2e1 [btrfs]
[ 2837.759383] ? evict_inodes+0x132/0x141
[ 2837.759383] btrfs_put_super+0x15/0x17 [btrfs]
[ 2837.759383] generic_shutdown_super+0x6a/0xeb
[ 2837.759383] kill_anon_super+0x12/0x1c
[ 2837.759383] btrfs_kill_super+0x16/0x21 [btrfs]
[ 2837.759383] deactivate_locked_super+0x30/0x68
[ 2837.759383] deactivate_super+0x36/0x39
[ 2837.759383] cleanup_mnt+0x58/0x76
[ 2837.759383] __cleanup_mnt+0x12/0x14
[ 2837.759383] task_work_run+0x77/0x9b
[ 2837.759383] prepare_exit_to_usermode+0x9d/0xc5
[ 2837.759383] syscall_return_slowpath+0x196/0x1b9
[ 2837.759383] entry_SYSCALL_64_fastpath+0xab/0xad
[ 2837.759383] RIP: 0033:0x7f3ef3e6b9a7
[ 2837.759383] RSP: 002b:00007ffdd0d8de58 EFLAGS: 00000246 ORIG_RAX: 00000000000000a6
[ 2837.759383] RAX: 0000000000000000 RBX: 0000556f76a39060 RCX: 00007f3ef3e6b9a7
[ 2837.759383] RDX: 0000000000000001 RSI: 0000000000000000 RDI: 0000556f76a3f910
[ 2837.759383] RBP: 0000556f76a3f910 R08: 0000556f76a3e670 R09: 0000000000000015
[ 2837.759383] R10: 00000000000006b4 R11: 0000000000000246 R12: 00007f3ef436ce64
[ 2837.759383] R13: 0000000000000000 R14: 0000556f76a39240 R15: 00007ffdd0d8e0e0
[ 2837.777063] ---[ end trace e79345fe24b30b8f ]---
[ 2837.778235] ------------[ cut here ]------------
[ 2837.778856] WARNING: CPU: 8 PID: 2474 at fs/btrfs/extent-tree.c:9825 btrfs_free_block_groups+0x348/0x3eb [btrfs]
[ 2837.791385] Modules linked in: dm_flakey dm_mod ppdev parport_pc psmouse parport sg pcspkr acpi_cpufreq tpm_tis tpm_tis_core i2c_piix4 i2c_core evdev tpm button serio_raw sunrpc loop autofs4 ext4 crc16 jbd2 mbcache btrfs raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor raid6_pq libcrc32c crc32c_generic raid1 raid0 multipath linear md_mod sr_mod cdrom sd_mod ata_generic virtio_scsi ata_piix libata virtio_pci virtio_ring virtio e1000 scsi_mod floppy
[ 2837.797711] CPU: 8 PID: 2474 Comm: umount Tainted: G W 4.10.0-rc8-btrfs-next-43+ #1
[ 2837.798594] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.1-0-gb3ef39f-prebuilt.qemu-project.org 04/01/2014
[ 2837.800118] Call Trace:
[ 2837.800515] dump_stack+0x68/0x92
[ 2837.801015] __warn+0xc2/0xdd
[ 2837.801471] warn_slowpath_null+0x1d/0x1f
[ 2837.801698] btrfs_free_block_groups+0x348/0x3eb [btrfs]
[ 2837.801698] close_ctree+0x1dd/0x2e1 [btrfs]
[ 2837.801698] ? evict_inodes+0x132/0x141
[ 2837.801698] btrfs_put_super+0x15/0x17 [btrfs]
[ 2837.801698] generic_shutdown_super+0x6a/0xeb
[ 2837.801698] kill_anon_super+0x12/0x1c
[ 2837.801698] btrfs_kill_super+0x16/0x21 [btrfs]
[ 2837.801698] deactivate_locked_super+0x30/0x68
[ 2837.801698] deactivate_super+0x36/0x39
[ 2837.801698] cleanup_mnt+0x58/0x76
[ 2837.801698] __cleanup_mnt+0x12/0x14
[ 2837.801698] task_work_run+0x77/0x9b
[ 2837.801698] prepare_exit_to_usermode+0x9d/0xc5
[ 2837.801698] syscall_return_slowpath+0x196/0x1b9
[ 2837.801698] entry_SYSCALL_64_fastpath+0xab/0xad
[ 2837.801698] RIP: 0033:0x7f3ef3e6b9a7
[ 2837.801698] RSP: 002b:00007ffdd0d8de58 EFLAGS: 00000246 ORIG_RAX: 00000000000000a6
[ 2837.801698] RAX: 0000000000000000 RBX: 0000556f76a39060 RCX: 00007f3ef3e6b9a7
[ 2837.801698] RDX: 0000000000000001 RSI: 0000000000000000 RDI: 0000556f76a3f910
[ 2837.801698] RBP: 0000556f76a3f910 R08: 0000556f76a3e670 R09: 0000000000000015
[ 2837.801698] R10: 00000000000006b4 R11: 0000000000000246 R12: 00007f3ef436ce64
[ 2837.801698] R13: 0000000000000000 R14: 0000556f76a39240 R15: 00007ffdd0d8e0e0
[ 2837.818441] ---[ end trace e79345fe24b30b90 ]---
[ 2837.818991] BTRFS info (device sdc): space_info 1 has 7974912 free, is not full
[ 2837.819830] BTRFS info (device sdc): space_info total=8388608, used=417792, pinned=0, reserved=0, may_use=18446744073709547520, readonly=0
What happens in the above example is the following:
1) When punching the hole, at btrfs_punch_hole(), the variable tail_len
is set to 2048 (as tail_start is 148Kb + 1 and offset + len is 150Kb).
This results in the creation of an extent map with a length of 2Kb
starting at file offset 148Kb, through find_first_non_hole() ->
btrfs_get_extent().
2) The second write (first write after the hole punch operation), sets
the range [50Kb, 152Kb[ to delalloc.
3) The third write, at btrfs_find_new_delalloc_bytes(), sees the extent
map covering the range [148Kb, 150Kb[ and ends up calling
set_extent_bit() for the same range, which results in splitting an
existing extent state record, covering the range [148Kb, 152Kb[ into
two 2Kb extent state records, covering the ranges [148Kb, 150Kb[ and
[150Kb, 152Kb[.
4) Finally at lock_and_cleanup_extent_if_need(), immediately after calling
btrfs_find_new_delalloc_bytes() we clear the delalloc bit from the
range [100Kb, 152Kb[ which results in the btrfs_clear_bit_hook()
callback being invoked against the two 2Kb extent state records that
cover the ranges [148Kb, 150Kb[ and [150Kb, 152Kb[. When called against
the first 2Kb extent state, it calls btrfs_delalloc_release_metadata()
with a length argument of 2048 bytes. That function rounds up the length
to a sector size aligned length, so it ends up considering a length of
4096 bytes, and then calls calc_csum_metadata_size() which results in
decrementing the inode's csum_bytes counter by 4096 bytes, so after
it stays a value of 0 bytes. Then the same happens when
btrfs_clear_bit_hook() is called against the second extent state that
has a length of 2Kb, covering the range [150Kb, 152Kb[, the length is
rounded up to 4096 and calc_csum_metadata_size() ends up being called
to decrement 4096 bytes from the inode's csum_bytes counter, which
at that time has a value of 0, leading to an underflow, which is
exactly what triggers the first warning, at btrfs_destroy_inode().
All the other warnings relate to several space accounting counters
that underflow as well due to similar reasons.
A similar case but where the hole punching operation creates an extent map
with a start offset not aligned to the sector size is the following:
$ mkfs.btrfs -f /dev/sdb
$ mount /dev/sdb /mnt
$ xfs_io -f -c "fpunch 695K 820K" $SCRATCH_MNT/bar
$ xfs_io -c "pwrite -S 0xaa 1008K 307K" $SCRATCH_MNT/bar
$ xfs_io -c "pwrite -S 0xbb -b 630K 1073K 630K" $SCRATCH_MNT/bar
$ xfs_io -c "pwrite -S 0xcc -b 459K 1068K 459K" $SCRATCH_MNT/bar
$ umount /mnt
During the unmount operation we get similar traces for the same reasons as
in the first example.
So fix the hole punching operation to make sure it never creates extent
maps with a length that is not aligned to the sector size nor with a start
offset that is not aligned to the sector size, as this breaks all
assumptions and it's a land mine.
Fixes: d77815461f ("btrfs: Avoid trucating page or punching hole in a already existed hole.")
Cc: <stable@vger.kernel.org>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
On an uncontended system, we can end up hitting soft lockups while
doing replace_path. At the core, and frequently called is
btrfs_qgroup_trace_leaf_items, so it makes sense to add a cond_resched
there.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This function is supposed to return blk_status_t error codes now but
there was a stray -ENOMEM left behind.
Fixes: 4e4cbee93d ("block: switch bios to blk_status_t")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Christoph Hellwig <hch@lst.de>
Acked-by: David Sterba <dsterba@suse.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently, percpu_counter_add is a wrapper around __percpu_counter_add
which is preempt safe due to explicit calls to preempt_disable. Given
how __ prefix is used in percpu related interfaces, the naming
unfortunately creates the false sense that __percpu_counter_add is
less safe than percpu_counter_add. In terms of context-safety,
they're equivalent. The only difference is that the __ version takes
a batch parameter.
Make this a bit more explicit by just renaming __percpu_counter_add to
percpu_counter_add_batch.
This patch doesn't cause any functional changes.
tj: Minor updates to patch description for clarity. Cosmetic
indentation updates.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Chris Mason <clm@fb.com>
Cc: Josef Bacik <jbacik@fb.com>
Cc: David Sterba <dsterba@suse.com>
Cc: Darrick J. Wong <darrick.wong@oracle.com>
Cc: Jan Kara <jack@suse.com>
Cc: Jens Axboe <axboe@fb.com>
Cc: linux-mm@kvack.org
Cc: "David S. Miller" <davem@davemloft.net>
Return EAGAIN if any of the following checks fail
+ i_rwsem is not lockable
+ NODATACOW or PREALLOC is not set
+ Cannot nocow at the desired location
+ Writing beyond end of file which is not allocated
Acked-by: David Sterba <dsterba@suse.com>
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We got an internal report about a file system not wanting to mount
following 99e3ecfcb9 ("Btrfs: add more validation checks for
superblock").
BTRFS error (device sdb1): super_total_bytes 1000203816960 mismatch with
fs_devices total_rw_bytes 1000203820544
Subtracting the numbers we get a difference of less than a 4kb. Upon
closer inspection it became apparent that mkfs actually rounds down the
size of the device to a multiple of sector size. However, the same
cannot be said for various functions which modify the total size and are
called from btrfs_balance as well as when adding a new device. So this
patch ensures that values being saved into on-disk data structures are
always rounded down to a multiple of sectorsize.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The device->total_bytes member needs to always be rounded down to sectorsize
so that it corresponds to the value of super->total_bytes. However, there are
multiple places where the setter is fed a value which is not rounded which
can cause a fs to be unmountable due to the check introduced in
99e3ecfcb9 ("Btrfs: add more validation checks for superblock"). This patch
implements the getter/setter manually so that in a later patch I can add
necessary code to catch offenders.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The mount option alloc_start was used in the past for debugging and
stressing the chunk allocator. Not meant to be used by users, so we're
not breaking anybody's setup.
There was some added complexity handling changes of the value and when
it was not same as default. Such code has likely been untested and I
think it's better to remove it.
This patch kills all use of alloc_start, and by doing that also fixes
a bug when alloc_size is set, potentially called from statfs:
in btrfs_calc_avail_data_space, traversing the list in RCU, the RCU
protection is temporarily dropped so btrfs_account_dev_extents_size can
be called and then RCU is locked again! Doing that inside
list_for_each_entry_rcu is just asking for trouble, but unlikely to be
observed in practice.
Signed-off-by: David Sterba <dsterba@suse.com>
We can keep the state among the other fs_info flags, there's no reason
why fs_frozen would need to be separate.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The pattern when err is used for function exit and ret is used for
return values of callees is not used here.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The function is called from ioctl context and we don't hold any locks
that take part in writeback. Right now it's only fs_info::volume_mutex.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We don't hold any locks here. Inidirectly called from statfs.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Submit and wait parts of write_dev_flush() can be split into two
separate functions for better readability.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There is no extra benefit to count null bdev during the submit loop,
as these null devices will be anyway checked during command
completion device loop just after the submit loop. We are holding the
device_list_mutex, the device->bdev status won't change in between.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Since commit "btrfs: btrfs_io_bio_alloc never fails, skip error handling"
write_dev_flush will not return ENOMEM in the sending part. We do not
need to check for it in the callers.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ updated changelog ]
Signed-off-by: David Sterba <dsterba@suse.com>
We already skip storing data where compression does not make the result
at least one byte less. Let's make the logic better and check
that compression frees at least one sector size of bytes, otherwise it's
not that useful.
Signed-off-by: Timofey Titovets <nefelim4ag@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ changelog updated ]
Signed-off-by: David Sterba <dsterba@suse.com>
We can hardcode GFP_NOFS to btrfs_io_bio_alloc, although it means we
change it back from GFP_KERNEL in scrub. I'd rather save a few stack
bytes from not passing the gfp flags in the remaining, more imporatant,
contexts and the bio allocating API now looks more consistent.
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We use btrfs_bioset for bios and ask to allocate the entire size of
btrfs_io_bio from btrfs bio_alloc_bioset. The member 'bio' is
initialized but the bytes from 0 to offset of 'bio' are left
uninitialized. Although we initialize some of the members in our
helpers, we should initialize the whole structures.
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently dio read also goes to verify checksum if -EIO has been returned,
although it usually fails on checksum, it's not necessary at all, we could
directly check if there is another copy to read.
And with this, the behavior of dio read is now consistent with that of
buffered read.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ use bool for uptodate ]
Signed-off-by: David Sterba <dsterba@suse.com>
With raid1 profile, dio read isn't tolerating IO errors if read length is
less than the stripe length (64K).
Our bio didn't get split in btrfs_submit_direct_hook() if (dip->flags &
BTRFS_DIO_ORIG_BIO_SUBMITTED) is true and that happens when the read
length is less than 64k. In this case, if the underlying device returns
error somehow, bio->bi_error has recorded that error.
If we could recover the correct data from another copy in profile raid1/10/5/6,
with btrfs_subio_endio_read() returning 0, bio would have the correct data in
its vector, but bio->bi_error is not updated accordingly so that the following
dio_end_io(dio_bio, bio->bi_error) makes directIO think this read has failed.
This fixes the problem by setting bio's error to 0 if a good copy has been
found.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Most callers of btrfs_bio_alloc convert from bytes to sectors. Hide that
in the helper and simplify the logic in the callsers.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
compressed_bio_alloc is now a trivial wrapper around btrfs_bio_alloc, no
point keeping it. The error handling can be simplified, as we know
btrfs_bio_alloc will never fail.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
All callers pass gfp_flags=GFP_NOFS and nr_vecs=BIO_MAX_PAGES.
submit_extent_page adds __GFP_HIGH that does not make a difference in
our case as it allows access to memory reserves but otherwise does not
change the constraints.
Signed-off-by: David Sterba <dsterba@suse.com>
Update direct callers of btrfs_io_bio_alloc that do error handling, that
we can now remove.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Update direct callers of btrfs_bio_clone that do error handling, that we
can now remove.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Update direct callers of btrfs_bio_alloc that do error handling, that we
can now remove.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Christoph pointed out that bio allocations backed by a bioset will never
fail. As we always use a bioset for all bio allocations, we can skip
the error handling. This patch adjusts our low-level helpers, the
cascaded changes to all callers will come next.
CC: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The compression workspace buffers are larger than a page so we use
vmalloc, unconditionally. This is not always necessary as there might be
contiguous memory available.
Let's use the kvmalloc helpers that will try kmalloc first and fallback
to vmalloc. For that they require GFP_KERNEL flags. As we now have the
alloc_workspace calls protected by memalloc_nofs in the critical
contexts, we can safely use GFP_KERNEL.
Signed-off-by: David Sterba <dsterba@suse.com>
As alloc_workspace is now protected by memalloc_nofs where needed,
we can switch the kmalloc to use GFP_KERNEL.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The workspaces are preallocated at the beginning where we can safely use
GFP_KERNEL, but in some cases the find_workspace might reach the
allocation again, now in a more restricted context when the bios or
pages are being compressed.
To avoid potential lockup when alloc_workspace -> vmalloc would silently
use the GFP_KERNEL, add the memalloc_nofs helpers around the critical
call site.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
As we don't use vmalloc/vzalloc/vfree directly in ctree.c, we can now
use the proper header that defines kvmalloc.
Signed-off-by: David Sterba <dsterba@suse.com>
Now that init_ipath is called either from a safe context or with
memalloc_nofs protection, we can switch to GFP_KERNEL allocations in
init_path and init_data_container.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
init_ipath is called from a safe ioctl context and from scrub when
printing an error. The protection is added for three reasons:
* init_data_container calls vmalloc and this does not work as expected
in the GFP_NOFS context, so this silently does GFP_KERNEL and might
deadlock in some cases
* keep the context constraint of GFP_NOFS, used by scrub
* we want to use GFP_KERNEL unconditionally inside init_ipath or its
callees
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We use a growing buffer for xattrs larger than a page size, at some
point vmalloc is unconditionally used for larger buffers. We can still
try to avoid it using the kvmalloc helper.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The logic of kmalloc and vmalloc fallback is opencoded in
several places, we can now use the existing helper.
Signed-off-by: David Sterba <dsterba@suse.com>
Logic already skips if compression makes data bigger, let's sync lzo
with zlib and also return error if compressed size is equal to
input size.
Signed-off-by: Timofey Titovets <nefelim4ag@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ update changelog ]
Signed-off-by: David Sterba <dsterba@suse.com>
bio_io_error was introduced in the commit 4246a0b63b
("block: add a bi_error field to struct bio"), so use it to simplify
code.
Signed-off-by: Guoqing Jiang <gqjiang@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
First, instead of open-coding the vmalloc() fallback, use the new
kvzalloc() helper. Second, use memalloc_nofs_{save,restore}() instead of
GFP_NOFS, as vmalloc() uses some GFP_KERNEL allocations internally which
could lead to deadlocks.
Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Observing the number of slab objects of btrfs_transaction, there's just
one active on an almost quiescent filesystem, and the number of objects
goes to about ten when sync is in progress. Then the nubmer goes down to
1. This matches the expectations of the transaction lifetime.
For such use the separate slab cache is not justified, as we do not
reuse objects frequently. For the shortlived transaction, the generic
slab (size 512) should be ok. We can optimistically expect that the 512
slabs are not all used (fragmentation) and there are free slots to take
when we do the allocation, compared to potentially allocating a whole new
page for the separate slab.
We'll lose the stats about the object use, which could be added later if
we really need them.
Signed-off-by: David Sterba <dsterba@suse.com>
The structure scrub_wr_ctx is not used anywhere just the scrub context,
we can move the members there. The tgtdev is renamed so it's more clear
that it belongs to the "wr" part.
Signed-off-by: David Sterba <dsterba@suse.com>
As we now have the node/block sizes in fs_info, we can use them and can
drop the local copies.
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Fix copy paste typo in debug message for lzo.c, lzo is not deflate.
Signed-off-by: Timofey Titovets <nefelim4ag@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Nothing checks its return value.
Is it safe to skip checking return value of btrfs_wait_tree_block_writeback?
Liu Bo: I think yes, it's used in walk_log_tree which is called in two
places, free_log_tree and log replay. For free_log_tree, it waits for
any running writeback of the extent buffer under freeing to finish in
case we need to access the eb pointer from page->private, and it's OK to
not check the return value, while for log replay, it's doesn't wait
because wc->wait is not set. So neither cares about the writeback error.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
[ added more explanation to changelog, from Liu Bo ]
Signed-off-by: David Sterba <dsterba@suse.com>
__BTRFS_LAF_DATA_SIZE is used only by BTRFS_LEAF_DATA_SIZE. Make the
latter subsume the former.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Commit 5f39d397df ("Btrfs: Create extent_buffer interface
for large blocksizes") refactored btrfs_leaf_data function to take
extent_buffer rather than struct btrfs_leaf. However, as it turns out the
parameter being passed is never used. Furthermore this function no longer
returns the leaf data but rather the offset to it. So rename the function
to BTRFS_LEAF_DATA_OFFSET to make it consistent with other BTRFS_LEAF_*
helpers and turn it into a macro.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
[ removed () from the macro ]
Signed-off-by: David Sterba <dsterba@suse.com>
struct compressed_bio pointer can be used instead.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Instead of sending each argument of struct compressed_bio, send
the compressed_bio itself.
Also by having struct compressed_bio in btrfs_decompress_bio()
it would help tracing.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Following the factoring out of the creation code udpate_space_info can
only be called for already-existing space_info structs. As such it
cannot fail. Remove superfluous error handling and make the function
return void.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Jeff Mahoney <jeffm@suse.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently the struct space_info creation code is intermixed in the
udpate_space_info function. There are well-defined points at which the
we actually want to create brand-new space_info structs (e.g. during
mount of the filesystem as well as sometimes when adding/initialising
new chunks). In such cases update_space_info is called with 0 as the
bytes parameter. All of this makes for spaghetti code.
Fix it by factoring out the creation code in a separate
create_space_info structure. This also allows to simplify the internals.
Also remove BUG_ON from do_alloc_chunk since the callers handle errors.
Furthermore it will make the update_space_info function not fail,
allowing us to remove error handling in callers. This will come in a
follow up patch.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Jeff Mahoney <jeffm@suse.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This adds chunk_objectid and flags, with flags we can recognize whether
the block group is about data or metadata.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We commit transaction in order to reclaim space from pinned bytes because
it could process delayed refs, and in may_commit_transaction(), we check
first if pinned bytes are enough for the required space, we then check if
that plus bytes reserved for delayed insert are enough for the required
space.
This changes the code to the above logic.
Fixes: b150a4f10d ("Btrfs: use a percpu to keep track of possibly pinned bytes")
Tested-by: Nikolay Borisov <nborisov@suse.com>
Reported-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We don't need to take the mutex and zero out wr_cur_bio, as this is
called after the scrub finished.
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The helper scrub_free_wr_ctx is used only once and fits into
scrub_free_ctx as it continues sctx shutdown, no need to keep it
separate.
Signed-off-by: David Sterba <dsterba@suse.com>
The helper scrub_setup_wr_ctx is used only once and fits into
scrub_setup_ctx as it continues intialization, no need to keep it
separate.
Signed-off-by: David Sterba <dsterba@suse.com>
can_overcommit using the root to determine the allocation profile
is the only use of a root in the call graph below reserve_metadata_bytes.
It turns out that we only need to know whether the allocation is for
the chunk root or not -- and we can pass that around as a bool instead.
This allows us to pull root usage out of the reservation path all the
way up to reserve_metadata_bytes itself, which uses it only to compare
against fs_info->chunk_root to set the bool. In turn, this eliminates
a bunch of races where we use a particular root too early in the mount
process.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There are two places where we don't already know what kind of alloc
profile we need before calling btrfs_get_alloc_profile, but we need
access to a root everywhere we call it.
This patch adds helpers for btrfs_{data,metadata,system}_alloc_profile()
and relegates btrfs_system_alloc_profile to a static for use in those
two cases. The next patch will eliminate one of those.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The end io work queue items have been tracked by the work queues since
"Btrfs: Add async worker threads for pre and post IO checksumming"
(8b71284292) (2008).
Signed-off-by: David Sterba <dsterba@suse.com>
The list used to track checksums in the early version (2.6.29), but I
was able not pinpoint the commit that stopped using it. Everything
apparently works without it for a long time.
Signed-off-by: David Sterba <dsterba@suse.com>
Seems to be unused since the initial commit, we ignore readahead errors
anyway, the full read will handle that if necessary.
Signed-off-by: David Sterba <dsterba@suse.com>
Both btrfs_create_free_space_tree and btrfs_clear_free_space_tree
contain:
if (ret)
return ret;
return 0;
The if statement is only false when ret equals zero, and since we return
zero in such cases, we can safely remove the branching.
Signed-off-by: Sahil Kang <sahil.kang@asilaycomputing.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We only pass GFP_NOFS to btrfs_bio_clone_partial, so lets hardcode it.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
A rewrite of btrfs_submit_direct_hook appears to have introduced a warning:
fs/btrfs/inode.c: In function 'btrfs_submit_direct_hook':
fs/btrfs/inode.c:8467:14: error: 'bio' may be used uninitialized in this function [-Werror=maybe-uninitialized]
Where the 'bio' variable was previously initialized unconditionally, it
is now set in the "while (submit_len > 0)" loop that would never execute
if submit_len is zero.
Assuming this cannot happen in practice, we can avoid the warning
by simply replacing the while{} loop with a do{}while() loop so
the compiler knows that it will always be entered at least once.
Fixes changes introduced in "Btrfs: use bio_clone_bioset_partial to
simplify DIO submit".
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David Sterba <dsterba@suse.com>
All dio endio functions are using io_bio for struct btrfs_io_bio, this
makes btrfs_submit_direct to follow this convention.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Some check-integrity code depends on bio->bi_vcnt, this changes it to use
bio segments because some bios passing here may not have a reliable
bi_vcnt.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In the nocsum case of dio read endio, it returns immediately if an error
gets returned when repairing, which leaves the rest blocks unrepaired. The
behavior is different from how buffered read endio works in the same case.
This changes it to record error only and go on repairing the rest blocks.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Since dio submit has used bio_clone_fast, the submitted bio may not have a
reliable bi_vcnt, for the bio vector iterations in checksum related
functions, bio->bi_iter is not modified yet and it's safe to use
bio_for_each_segment, while for those bio vector iterations in dio read's
endio, we now save a copy of bvec_iter in struct btrfs_io_bio when cloning
bios and use the helper __bio_for_each_segment with the saved bvec_iter to
access each bvec.
Also for dio reads which don't get split, we also need to save a copy of
bio iterator in btrfs_bio_clone to let __bio_for_each_segments to access
each bvec in dio read's endio. Note that it doesn't affect other calls of
btrfs_bio_clone() because they don't need to use this iterator.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently when mapping bio to limit bio to a single stripe length, we
split bio by adding page to bio one by one, but later we don't modify
the vector of bio at all, thus we can use bio_clone_fast to use the
original bio vector directly.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This adds a new helper btrfs_bio_clone_partial, it'll allocate a cloned
bio that only owns a part of the original bio's data.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
For raid1 and raid10, we clone the original bio to the bios which are then
sent to different disks.
Right now we use bio_clone_bioset to create a clone bio with iterating
bi_io_vec to initialize it. This changes it to use bio_clone_fast()
which creates a clone bio but only copies the bi_io_vec pointer
instead of iterating bi_io_vec.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Instead pass around the failure tree and the io tree.
Signed-off-by: Josef Bacik <jbacik@fb.com>
Reviewed-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Once we remove the btree_inode we won't have an inode to pass anymore,
just pass the fs_info directly and the inum since we use that to print
out the repair message.
Signed-off-by: Josef Bacik <jbacik@fb.com>
Reviewed-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
For extent_io tree's we have carried the address_mapping of the inode
around in the io tree in order to pull the inode back out for calling
into various tree ops hooks. This works fine when everything that has
an extent_io_tree has an inode. But we are going to remove the
btree_inode, so we need to change this. Instead just have a generic
void * for private data that we can initialize with, and have all the
tree ops use that instead. This had a lot of cascading changes but
should be relatively straightforward.
Signed-off-by: Josef Bacik <jbacik@fb.com>
Reviewed-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ minor reordering of the callback prototypes ]
Signed-off-by: David Sterba <dsterba@suse.com>
This patch adds the read-write attribute quota_override into sysfs.
Any process which has CAP_SYS_RESOURCE can set this flag to on, and
once it is set to true, processes with CAP_SYS_RESOURCE can exceed
the quota.
Signed-off-by: Sargun Dhillon <sargun@sargun.me>
Reviewed-by: David Sterba <dsterba@suse.com>
[ minor changelog edits ]
Signed-off-by: David Sterba <dsterba@suse.com>
This patch introduces the quota override flag to btrfs_fs_info, and a
change to quota limit checking code to temporarily allow for quota to be
overridden for processes with CAP_SYS_RESOURCE.
It's useful for administrative programs, such as log rotation, that may
need to temporarily use more disk space in order to free up a greater
amount of overall disk space without yielding more disk space to the
rest of userland.
Eventually, we may want to add the idea of an operator-specific quota,
operator reserved space, or something else to allow for administrative
override, but this is perhaps the simplest solution.
Signed-off-by: Sargun Dhillon <sargun@sargun.me>
Reviewed-by: David Sterba <dsterba@suse.com>
[ minor changelog edits ]
Signed-off-by: David Sterba <dsterba@suse.com>
The ->free_chunk_space variable is used to track the unallocated space
and access to it is protected by a spinlock, which is not used for
anything else. Make the code a bit self-explanatory by switching the
variable to an atomic64_t type and kill the spinlock.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
[ not a performance critical code, use of atomic type is ok ]
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This adds comments to the flush error handling part of the code, and
hopes to maintain the same logic with a framework which can be used to
handle the errors at the volume level.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
These FIXMEs were already addressed in 2013. All functions check for
qgroup existence:
* btrfs_add_qgroup_relation
* btrfs_ioctl_qgroup_create
* btrfs_limit_qgroup
* btrfs_del_qgroup_relation
Signed-off-by: Daichou <tommy0705c@gmail.com>
[ enhance and reformat changelog ]
Signed-off-by: David Sterba <dsterba@suse.com>
Remove NULL test on kmap() as it will always return a valid pointer.
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
"flags" arguments are often seen as good API design as they allow
easy extensibility.
bioset_create_nobvec() is implemented internally as a variation in
flags passed to __bioset_create().
To support future extension, make the internal structure part of the
API.
i.e. add a 'flags' argument to bioset_create() and discard
bioset_create_nobvec().
Note that the bio_split allocations in drivers/md/raid* do not need
the bvec mempool - they should have used bioset_create_nobvec().
Suggested-by: Christoph Hellwig <hch@infradead.org>
Reviewed-by: Christoph Hellwig <hch@infradead.org>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pull crypto fix from Herbert Xu:
"This fixes a bug on sparc where we may dereference freed stack memory"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: Work around deallocated stack frame reference gcc bug on sparc.
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJZPdbLAAoJEHm+PkMAQRiGx4wH/1nCjfnl6fE8oJ24/1gEAOUh
biFdqJkYZmlLYHVtYfLm4Ueg4adJdg0wx6qM/4RaAzmQVvLfDV34bc1qBf1+P95G
kVF+osWyXrZo5cTwkwapHW/KNu4VJwAx2D1wrlxKDVG5AOrULH1pYOYGOpApEkZU
4N+q5+M0ce0GJpqtUZX+UnI33ygjdDbBxXoFKsr24B7eA0ouGbAJ7dC88WcaETL+
2/7tT01SvDMo0jBSV0WIqlgXwZ5gp3yPGnklC3F4159Yze6VFrzHMKS/UpPF8o8E
W9EbuzwxsKyXUifX2GY348L1f+47glen/1sedbuKnFhP6E9aqUQQJXvEO7ueQl4=
=m2Gx
-----END PGP SIGNATURE-----
Merge tag 'v4.12-rc5' into for-4.13/block
We've already got a few conflicts and upcoming work depends on some of the
changes that have gone into mainline as regression fixes for this series.
Pull in 4.12-rc5 to resolve these conflicts and make it easier on down stream
trees to continue working on 4.13 changes.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pull btrfs fixes from Chris Mason:
"Some fixes that Dave Sterba collected.
We've been hitting an early enospc problem on production machines that
Omar tracked down to an old int->u64 mistake. I waited a bit on this
pull to make sure it was really the problem from production, but it's
on ~2100 hosts now and I think we're good.
Omar also noticed a commit in the queue would make new early ENOSPC
problems. I pulled that out for now, which is why the top three
commits are younger than the rest.
Otherwise these are all fixes, some explaining very old bugs that
we've been poking at for a while"
* 'for-linus-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
Btrfs: fix delalloc accounting leak caused by u32 overflow
Btrfs: clear EXTENT_DEFRAG bits in finish_ordered_io
btrfs: tree-log.c: Wrong printk information about namelen
btrfs: fix race with relocation recovery and fs_root setup
btrfs: fix memory leak in update_space_info failure path
btrfs: use correct types for page indices in btrfs_page_exists_in_range
btrfs: fix incorrect error return ret being passed to mapping_set_error
btrfs: Make flush bios explicitely sync
btrfs: fiemap: Cache and merge fiemap extent before submit it to user
btrfs_calc_trans_metadata_size() does an unsigned 32-bit multiplication,
which can overflow if num_items >= 4 GB / (nodesize * BTRFS_MAX_LEVEL * 2).
For a nodesize of 16kB, this overflow happens at 16k items. Usually,
num_items is a small constant passed to btrfs_start_transaction(), but
we also use btrfs_calc_trans_metadata_size() for metadata reservations
for extent items in btrfs_delalloc_{reserve,release}_metadata().
In drop_outstanding_extents(), num_items is calculated as
inode->reserved_extents - inode->outstanding_extents. The difference
between these two counters is usually small, but if many delalloc
extents are reserved and then the outstanding extents are merged in
btrfs_merge_extent_hook(), the difference can become large enough to
overflow in btrfs_calc_trans_metadata_size().
The overflow manifests itself as a leak of a multiple of 4 GB in
delalloc_block_rsv and the metadata bytes_may_use counter. This in turn
can cause early ENOSPC errors. Additionally, these WARN_ONs in
extent-tree.c will be hit when unmounting:
WARN_ON(fs_info->delalloc_block_rsv.size > 0);
WARN_ON(fs_info->delalloc_block_rsv.reserved > 0);
WARN_ON(space_info->bytes_pinned > 0 ||
space_info->bytes_reserved > 0 ||
space_info->bytes_may_use > 0);
Fix it by casting nodesize to a u64 so that
btrfs_calc_trans_metadata_size() does a full 64-bit multiplication.
While we're here, do the same in btrfs_calc_trunc_metadata_size(); this
can't overflow with any existing uses, but it's better to be safe here
than have another hard-to-debug problem later on.
Cc: stable@vger.kernel.org
Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
Before this, we use 'filled' mode here, ie. if all range has been
filled with EXTENT_DEFRAG bits, get to clear it, but if the defrag
range joins the adjacent delalloc range, then we'll have EXTENT_DEFRAG
bits in extent_state until releasing this inode's pages, and that
prevents extent_data from being freed.
This clears the bit if any was found within the ordered extent.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
In verify_dir_item, it wants to printk name_len of dir_item but
printk data_len acutally.
Fix it by calling btrfs_dir_name_len instead of btrfs_dir_data_len.
Signed-off-by: Su Yue <suy.fnst@cn.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
Replace bi_error with a new bi_status to allow for a clear conversion.
Note that device mapper overloaded bi_error with a private value, which
we'll have to keep arround at least for now and thus propagate to a
proper blk_status_t value.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
On sparc, if we have an alloca() like situation, as is the case with
SHASH_DESC_ON_STACK(), we can end up referencing deallocated stack
memory. The result can be that the value is clobbered if a trap
or interrupt arrives at just the right instruction.
It only occurs if the function ends returning a value from that
alloca() area and that value can be placed into the return value
register using a single instruction.
For example, in lib/libcrc32c.c:crc32c() we end up with a return
sequence like:
return %i7+8
lduw [%o5+16], %o0 ! MEM[(u32 *)__shash_desc.1_10 + 16B],
%o5 holds the base of the on-stack area allocated for the shash
descriptor. But the return released the stack frame and the
register window.
So if an intererupt arrives between 'return' and 'lduw', then
the value read at %o5+16 can be corrupted.
Add a data compiler barrier to work around this problem. This is
exactly what the gcc fix will end up doing as well, and it absolutely
should not change the code generated for other cpus (unless gcc
on them has the same bug :-)
With crucial insight from Eric Sandeen.
Cc: <stable@vger.kernel.org>
Reported-by: Anatoly Pugachev <matorola@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
If we have to recover relocation during mount, we'll ultimately have to
evict the orphan inode. That goes through the reservation dance, where
priority_reclaim_metadata_space and flush_space expect fs_info->fs_root
to be valid. That's the next thing to be set up during mount, so we
crash, almost always in flush_space trying to join the transaction
but priority_reclaim_metadata_space is possible as well. This call
path has been problematic in the past WRT whether ->fs_root is valid
yet. Commit 957780eb27 (Btrfs: introduce ticketed enospc
infrastructure) added new users that are called in the direct path
instead of the async path that had already been worked around.
The thing is that we don't actually need the fs_root, specifically, for
anything. We either use it to determine whether the root is the
chunk_root for use in choosing an allocation profile or as a root to pass
btrfs_join_transaction before immediately committing it. Anything that
isn't the chunk root works in the former case and any root works in
the latter.
A simple fix is to use a root we know will always be there: the
extent_root.
Cc: <stable@vger.kernel.org> # v4.8+
Fixes: 957780eb27 (Btrfs: introduce ticketed enospc infrastructure)
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
If we fail to add the space_info kobject, we'll leak the memory
for the percpu counter.
Fixes: 6ab0a2029c (btrfs: publish allocation data in sysfs)
Cc: <stable@vger.kernel.org> # v3.14+
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Variables start_idx and end_idx are supposed to hold a page index
derived from the file offsets. The int type is not the right one though,
offsets larger than 1 << 44 will get silently trimmed off the high bits.
(1 << 44 is 16TiB)
What can go wrong, if start is below the boundary and end gets trimmed:
- if there's a page after start, we'll find it (radix_tree_gang_lookup_slot)
- the final check "if (page->index <= end_idx)" will unexpectedly fail
The function will return false, ie. "there's no page in the range",
although there is at least one.
btrfs_page_exists_in_range is used to prevent races in:
* in hole punching, where we make sure there are not pages in the
truncated range, otherwise we'll wait for them to finish and redo
truncation, but we're going to replace the pages with holes anyway so
the only problem is the intermediate state
* lock_extent_direct: we want to make sure there are no pages before we
lock and start DIO, to prevent stale data reads
For practical occurence of the bug, there are several constaints. The
file must be quite large, the affected range must cross the 16TiB
boundary and the internal state of the file pages and pending operations
must match. Also, we must not have started any ordered data in the
range, otherwise we don't even reach the buggy function check.
DIO locking tries hard in several places to avoid deadlocks with
buffered IO and avoids waiting for ranges. The worst consequence seems
to be stale data read.
CC: Liu Bo <bo.li.liu@oracle.com>
CC: stable@vger.kernel.org # 3.16+
Fixes: fc4adbff82 ("btrfs: Drop EXTENT_UPTODATE check in hole punching and direct locking")
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The setting of return code ret should be based on the error code
passed into function end_extent_writepage and not on ret. Thanks
to Liu Bo for spotting this mistake in the original fix I submitted.
Detected by CoverityScan, CID#1414312 ("Logically dead code")
Fixes: 5dca6eea91 ("Btrfs: mark mapping with error flag to report errors to userspace")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Commit b685d3d65a "block: treat REQ_FUA and REQ_PREFLUSH as
synchronous" removed REQ_SYNC flag from WRITE_{FUA|PREFLUSH|...}
definitions. generic_make_request_checks() however strips REQ_FUA and
REQ_PREFLUSH flags from a bio when the storage doesn't report volatile
write cache and thus write effectively becomes asynchronous which can
lead to performance regressions
Fix the problem by making sure all bios which are synchronous are
properly marked with REQ_SYNC.
CC: David Sterba <dsterba@suse.com>
CC: linux-btrfs@vger.kernel.org
Fixes: b685d3d65a
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[BUG]
Cycle mount btrfs can cause fiemap to return different result.
Like:
# mount /dev/vdb5 /mnt/btrfs
# dd if=/dev/zero bs=16K count=4 oflag=dsync of=/mnt/btrfs/file
# xfs_io -c "fiemap -v" /mnt/btrfs/file
/mnt/test/file:
EXT: FILE-OFFSET BLOCK-RANGE TOTAL FLAGS
0: [0..127]: 25088..25215 128 0x1
# umount /mnt/btrfs
# mount /dev/vdb5 /mnt/btrfs
# xfs_io -c "fiemap -v" /mnt/btrfs/file
/mnt/test/file:
EXT: FILE-OFFSET BLOCK-RANGE TOTAL FLAGS
0: [0..31]: 25088..25119 32 0x0
1: [32..63]: 25120..25151 32 0x0
2: [64..95]: 25152..25183 32 0x0
3: [96..127]: 25184..25215 32 0x1
But after above fiemap, we get correct merged result if we call fiemap
again.
# xfs_io -c "fiemap -v" /mnt/btrfs/file
/mnt/test/file:
EXT: FILE-OFFSET BLOCK-RANGE TOTAL FLAGS
0: [0..127]: 25088..25215 128 0x1
[REASON]
Btrfs will try to merge extent map when inserting new extent map.
btrfs_fiemap(start=0 len=(u64)-1)
|- extent_fiemap(start=0 len=(u64)-1)
|- get_extent_skip_holes(start=0 len=64k)
| |- btrfs_get_extent_fiemap(start=0 len=64k)
| |- btrfs_get_extent(start=0 len=64k)
| | Found on-disk (ino, EXTENT_DATA, 0)
| |- add_extent_mapping()
| |- Return (em->start=0, len=16k)
|
|- fiemap_fill_next_extent(logic=0 phys=X len=16k)
|
|- get_extent_skip_holes(start=0 len=64k)
| |- btrfs_get_extent_fiemap(start=0 len=64k)
| |- btrfs_get_extent(start=16k len=48k)
| | Found on-disk (ino, EXTENT_DATA, 16k)
| |- add_extent_mapping()
| | |- try_merge_map()
| | Merge with previous em start=0 len=16k
| | resulting em start=0 len=32k
| |- Return (em->start=0, len=32K) << Merged result
|- Stripe off the unrelated range (0~16K) of return em
|- fiemap_fill_next_extent(logic=16K phys=X+16K len=16K)
^^^ Causing split fiemap extent.
And since in add_extent_mapping(), em is already merged, in next
fiemap() call, we will get merged result.
[FIX]
Here we introduce a new structure, fiemap_cache, which records previous
fiemap extent.
And will always try to merge current fiemap_cache result before calling
fiemap_fill_next_extent().
Only when we failed to merge current fiemap extent with cached one, we
will call fiemap_fill_next_extent() to submit cached one.
So by this method, we can merge all fiemap extents.
It can also be done in fs/ioctl.c, however the problem is if
fieinfo->fi_extents_max == 0, we have no space to cache previous fiemap
extent.
So I choose to merge it in btrfs.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Pull btrfs updates from Chris Mason:
"This has fixes and cleanups Dave Sterba collected for the merge
window.
The biggest functional fixes are between btrfs raid5/6 and scrub, and
raid5/6 and device replacement. Some of our pending qgroup fixes are
included as well while I bash on the rest in testing.
We also have the usual set of cleanups, including one that makes
__btrfs_map_block() much more maintainable, and conversions from
atomic_t to refcount_t"
* 'for-linus-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: (71 commits)
btrfs: fix the gfp_mask for the reada_zones radix tree
Btrfs: fix reported number of inode blocks
Btrfs: send, fix file hole not being preserved due to inline extent
Btrfs: fix extent map leak during fallocate error path
Btrfs: fix incorrect space accounting after failure to insert inline extent
Btrfs: fix invalid attempt to free reserved space on failure to cow range
btrfs: Handle delalloc error correctly to avoid ordered extent hang
btrfs: Fix metadata underflow caused by btrfs_reloc_clone_csum error
btrfs: check if the device is flush capable
btrfs: delete unused member nobarriers
btrfs: scrub: Fix RAID56 recovery race condition
btrfs: scrub: Introduce full stripe lock for RAID56
btrfs: Use ktime_get_real_ts for root ctime
Btrfs: handle only applicable errors returned by btrfs_get_extent
btrfs: qgroup: Fix qgroup corruption caused by inode_cache mount option
btrfs: use q which is already obtained from bdev_get_queue
Btrfs: switch to div64_u64 if with a u64 divisor
Btrfs: update scrub_parity to use u64 stripe_len
Btrfs: enable repair during read for raid56 profile
btrfs: use clear_page where appropriate
...
__vmalloc* allows users to provide gfp flags for the underlying
allocation. This API is quite popular
$ git grep "=[[:space:]]__vmalloc\|return[[:space:]]*__vmalloc" | wc -l
77
The only problem is that many people are not aware that they really want
to give __GFP_HIGHMEM along with other flags because there is really no
reason to consume precious lowmemory on CONFIG_HIGHMEM systems for pages
which are mapped to the kernel vmalloc space. About half of users don't
use this flag, though. This signals that we make the API unnecessarily
too complex.
This patch simply uses __GFP_HIGHMEM implicitly when allocating pages to
be mapped to the vmalloc space. Current users which add __GFP_HIGHMEM
are simplified and drop the flag.
Link: http://lkml.kernel.org/r/20170307141020.29107-1-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Matthew Wilcox <mawilcox@microsoft.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: David Rientjes <rientjes@google.com>
Cc: Cristopher Lameter <cl@linux.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There are many code paths opencoding kvmalloc. Let's use the helper
instead. The main difference to kvmalloc is that those users are
usually not considering all the aspects of the memory allocator. E.g.
allocation requests <= 32kB (with 4kB pages) are basically never failing
and invoke OOM killer to satisfy the allocation. This sounds too
disruptive for something that has a reasonable fallback - the vmalloc.
On the other hand those requests might fallback to vmalloc even when the
memory allocator would succeed after several more reclaim/compaction
attempts previously. There is no guarantee something like that happens
though.
This patch converts many of those places to kv[mz]alloc* helpers because
they are more conservative.
Link: http://lkml.kernel.org/r/20170306103327.2766-2-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> # Xen bits
Acked-by: Kees Cook <keescook@chromium.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Andreas Dilger <andreas.dilger@intel.com> # Lustre
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> # KVM/s390
Acked-by: Dan Williams <dan.j.williams@intel.com> # nvdim
Acked-by: David Sterba <dsterba@suse.com> # btrfs
Acked-by: Ilya Dryomov <idryomov@gmail.com> # Ceph
Acked-by: Tariq Toukan <tariqt@mellanox.com> # mlx4
Acked-by: Leon Romanovsky <leonro@mellanox.com> # mlx5
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Anton Vorontsov <anton@enomsg.org>
Cc: Colin Cross <ccross@android.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Cc: Santosh Raspatur <santosh@chelsio.com>
Cc: Hariprasad S <hariprasad@chelsio.com>
Cc: Yishai Hadas <yishaih@mellanox.com>
Cc: Oleg Drokin <oleg.drokin@intel.com>
Cc: "Yan, Zheng" <zyan@redhat.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: David Miller <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commits cc8385b59e and 7ef70b4d99 added preallocation for the
reada radix trees and also switched them over to GFP_KERNEL for the
default gfp mask.
Since we're doing radix tree insertions under spinlocks, we need
to make sure the mask doesn't allow sleeping. This fix keeps
the radix preallocation but switches back to the original gfp_mask.
Reported-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
Pull block layer updates from Jens Axboe:
- Add BFQ IO scheduler under the new blk-mq scheduling framework. BFQ
was initially a fork of CFQ, but subsequently changed to implement
fairness based on B-WF2Q+, a modified variant of WF2Q. BFQ is meant
to be used on desktop type single drives, providing good fairness.
From Paolo.
- Add Kyber IO scheduler. This is a full multiqueue aware scheduler,
using a scalable token based algorithm that throttles IO based on
live completion IO stats, similary to blk-wbt. From Omar.
- A series from Jan, moving users to separately allocated backing
devices. This continues the work of separating backing device life
times, solving various problems with hot removal.
- A series of updates for lightnvm, mostly from Javier. Includes a
'pblk' target that exposes an open channel SSD as a physical block
device.
- A series of fixes and improvements for nbd from Josef.
- A series from Omar, removing queue sharing between devices on mostly
legacy drivers. This helps us clean up other bits, if we know that a
queue only has a single device backing. This has been overdue for
more than a decade.
- Fixes for the blk-stats, and improvements to unify the stats and user
windows. This both improves blk-wbt, and enables other users to
register a need to receive IO stats for a device. From Omar.
- blk-throttle improvements from Shaohua. This provides a scalable
framework for implementing scalable priotization - particularly for
blk-mq, but applicable to any type of block device. The interface is
marked experimental for now.
- Bucketized IO stats for IO polling from Stephen Bates. This improves
efficiency of polled workloads in the presence of mixed block size
IO.
- A few fixes for opal, from Scott.
- A few pulls for NVMe, including a lot of fixes for NVMe-over-fabrics.
From a variety of folks, mostly Sagi and James Smart.
- A series from Bart, improving our exposed info and capabilities from
the blk-mq debugfs support.
- A series from Christoph, cleaning up how handle WRITE_ZEROES.
- A series from Christoph, cleaning up the block layer handling of how
we track errors in a request. On top of being a nice cleanup, it also
shrinks the size of struct request a bit.
- Removal of mg_disk and hd (sorry Linus) by Christoph. The former was
never used by platforms, and the latter has outlived it's usefulness.
- Various little bug fixes and cleanups from a wide variety of folks.
* 'for-4.12/block' of git://git.kernel.dk/linux-block: (329 commits)
block: hide badblocks attribute by default
blk-mq: unify hctx delay_work and run_work
block: add kblock_mod_delayed_work_on()
blk-mq: unify hctx delayed_run_work and run_work
nbd: fix use after free on module unload
MAINTAINERS: bfq: Add Paolo as maintainer for the BFQ I/O scheduler
blk-mq-sched: alloate reserved tags out of normal pool
mtip32xx: use runtime tag to initialize command header
scsi: Implement blk_mq_ops.show_rq()
blk-mq: Add blk_mq_ops.show_rq()
blk-mq: Show operation, cmd_flags and rq_flags names
blk-mq: Make blk_flags_show() callers append a newline character
blk-mq: Move the "state" debugfs attribute one level down
blk-mq: Unregister debugfs attributes earlier
blk-mq: Only unregister hctxs for which registration succeeded
blk-mq-debugfs: Rename functions for registering and unregistering the mq directory
blk-mq: Let blk_mq_debugfs_register() look up the queue name
blk-mq: Register <dev>/queue/mq after having registered <dev>/queue
ide-pm: always pass 0 error to ide_complete_rq in ide_do_devset
ide-pm: always pass 0 error to __blk_end_request_all
..
Pull btrfs fix from Chris Mason:
"We have one more fix for btrfs.
This gets rid of a new WARN_ON from rc1 that ended up making more
noise than we really want. The larger fix for the underflow got
delayed a bit and it's better for now to put it under
CONFIG_BTRFS_DEBUG"
* 'for-linus-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
btrfs: qgroup: move noisy underflow warning to debugging build
Currently when there are buffered writes that were not yet flushed and
they fall within allocated ranges of the file (that is, not in holes or
beyond eof assuming there are no prealloc extents beyond eof), btrfs
simply reports an incorrect number of used blocks through the stat(2)
system call (or any of its variants), regardless of mount options or
inode flags (compress, compress-force, nodatacow). This is because the
number of blocks used that is reported is based on the current number
of bytes in the vfs inode plus the number of dealloc bytes in the btrfs
inode. The later covers bytes that both fall within allocated regions
of the file and holes.
Example scenarios where the number of reported blocks is wrong while the
buffered writes are not flushed:
$ mkfs.btrfs -f /dev/sdc
$ mount /dev/sdc /mnt/sdc
$ xfs_io -f -c "pwrite -S 0xaa 0 64K" /mnt/sdc/foo1
wrote 65536/65536 bytes at offset 0
64 KiB, 16 ops; 0.0000 sec (259.336 MiB/sec and 66390.0415 ops/sec)
$ sync
$ xfs_io -c "pwrite -S 0xbb 0 64K" /mnt/sdc/foo1
wrote 65536/65536 bytes at offset 0
64 KiB, 16 ops; 0.0000 sec (192.308 MiB/sec and 49230.7692 ops/sec)
# The following should have reported 64K...
$ du -h /mnt/sdc/foo1
128K /mnt/sdc/foo1
$ sync
# After flushing the buffered write, it now reports the correct value.
$ du -h /mnt/sdc/foo1
64K /mnt/sdc/foo1
$ xfs_io -f -c "falloc -k 0 128K" -c "pwrite -S 0xaa 0 64K" /mnt/sdc/foo2
wrote 65536/65536 bytes at offset 0
64 KiB, 16 ops; 0.0000 sec (520.833 MiB/sec and 133333.3333 ops/sec)
$ sync
$ xfs_io -c "pwrite -S 0xbb 64K 64K" /mnt/sdc/foo2
wrote 65536/65536 bytes at offset 65536
64 KiB, 16 ops; 0.0000 sec (260.417 MiB/sec and 66666.6667 ops/sec)
# The following should have reported 128K...
$ du -h /mnt/sdc/foo2
192K /mnt/sdc/foo2
$ sync
# After flushing the buffered write, it now reports the correct value.
$ du -h /mnt/sdc/foo2
128K /mnt/sdc/foo2
So the number of used file blocks is simply incorrect, unlike in other
filesystems such as ext4 and xfs for example, but only while the buffered
writes are not flushed.
Fix this by tracking the number of delalloc bytes that fall within holes
and beyond eof of a file, and use instead this new counter when reporting
the number of used blocks for an inode.
Another different problem that exists is that the delalloc bytes counter
is reset when writeback starts (by clearing the EXTENT_DEALLOC flag from
the respective range in the inode's iotree) and the vfs inode's bytes
counter is only incremented when writeback finishes (through
insert_reserved_file_extent()). Therefore while writeback is ongoing we
simply report a wrong number of blocks used by an inode if the write
operation covers a range previously unallocated. While this change does
not fix this problem, it does minimizes it a lot by shortening that time
window, as the new dealloc bytes counter (new_delalloc_bytes) is only
decremented when writeback finishes right before updating the vfs inode's
bytes counter. Fully fixing this second problem is not trivial and will
be addressed later by a different patch.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Normally we don't have inline extents followed by regular extents, but
there's currently at least one harmless case where this happens. For
example, when the page size is 4Kb and compression is enabled:
$ mkfs.btrfs -f /dev/sdb
$ mount -o compress /dev/sdb /mnt
$ xfs_io -f -c "pwrite -S 0xaa 0 4K" -c "fsync" /mnt/foobar
$ xfs_io -c "pwrite -S 0xbb 8K 4K" -c "fsync" /mnt/foobar
In this case we get a compressed inline extent, representing 4Kb of
data, followed by a hole extent and then a regular data extent. The
inline extent was not expanded/converted to a regular extent exactly
because it represents 4Kb of data. This does not cause any apparent
problem (such as the issue solved by commit e1699d2d7b
("btrfs: add missing memset while reading compressed inline extents"))
except trigger an unexpected case in the incremental send code path
that makes us issue an operation to write a hole when it's not needed,
resulting in more writes at the receiver and wasting space at the
receiver.
So teach the incremental send code to deal with this particular case.
The issue can be currently triggered by running fstests btrfs/137 with
compression enabled (MOUNT_OPTIONS="-o compress" ./check btrfs/137).
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
If the call to btrfs_qgroup_reserve_data() failed, we were leaking an
extent map structure. The failure can happen either due to an -ENOMEM
condition or, when quotas are enabled, due to -EDQUOT for example.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[BUG]
If run_delalloc_range() returns error and there is already some ordered
extents created, btrfs will be hanged with the following backtrace:
Call Trace:
__schedule+0x2d4/0xae0
schedule+0x3d/0x90
btrfs_start_ordered_extent+0x160/0x200 [btrfs]
? wake_atomic_t_function+0x60/0x60
btrfs_run_ordered_extent_work+0x25/0x40 [btrfs]
btrfs_scrubparity_helper+0x1c1/0x620 [btrfs]
btrfs_flush_delalloc_helper+0xe/0x10 [btrfs]
process_one_work+0x2af/0x720
? process_one_work+0x22b/0x720
worker_thread+0x4b/0x4f0
kthread+0x10f/0x150
? process_one_work+0x720/0x720
? kthread_create_on_node+0x40/0x40
ret_from_fork+0x2e/0x40
[CAUSE]
|<------------------ delalloc range --------------------------->|
| OE 1 | OE 2 | ... | OE n |
|<>| |<---------- cleanup range --------->|
||
\_=> First page handled by end_extent_writepage() in __extent_writepage()
The problem is caused by error handler of run_delalloc_range(), which
doesn't handle any created ordered extents, leaving them waiting on
btrfs_finish_ordered_io() to finish.
However after run_delalloc_range() returns error, __extent_writepage()
won't submit bio, so btrfs_writepage_end_io_hook() won't be triggered
except the first page, and btrfs_finish_ordered_io() won't be triggered
for created ordered extents either.
So OE 2~n will hang forever, and if OE 1 is larger than one page, it
will also hang.
[FIX]
Introduce btrfs_cleanup_ordered_extents() function to cleanup created
ordered extents and finish them manually.
The function is based on existing
btrfs_endio_direct_write_update_ordered() function, and modify it to
act just like btrfs_writepage_endio_hook() but handles specified range
other than one page.
After fix, delalloc error will be handled like:
|<------------------ delalloc range --------------------------->|
| OE 1 | OE 2 | ... | OE n |
|<>|<-------- ----------->|<------ old error handler --------->|
|| ||
|| \_=> Cleaned up by cleanup_ordered_extents()
\_=> First page handled by end_extent_writepage() in __extent_writepage()
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
[BUG]
When btrfs_reloc_clone_csum() reports error, it can underflow metadata
and leads to kernel assertion on outstanding extents in
run_delalloc_nocow() and cow_file_range().
BTRFS info (device vdb5): relocating block group 12582912 flags data
BTRFS info (device vdb5): found 1 extents
assertion failed: inode->outstanding_extents >= num_extents, file: fs/btrfs//extent-tree.c, line: 5858
Currently, due to another bug blocking ordered extents, the bug is only
reproducible under certain block group layout and using error injection.
a) Create one data block group with one 4K extent in it.
To avoid the bug that hangs btrfs due to ordered extent which never
finishes
b) Make btrfs_reloc_clone_csum() always fail
c) Relocate that block group
[CAUSE]
run_delalloc_nocow() and cow_file_range() handles error from
btrfs_reloc_clone_csum() wrongly:
(The ascii chart shows a more generic case of this bug other than the
bug mentioned above)
|<------------------ delalloc range --------------------------->|
| OE 1 | OE 2 | ... | OE n |
|<----------- cleanup range --------------->|
|<----------- ----------->|
\/
btrfs_finish_ordered_io() range
So error handler, which calls extent_clear_unlock_delalloc() with
EXTENT_DELALLOC and EXTENT_DO_ACCOUNT bits, and btrfs_finish_ordered_io()
will both cover OE n, and free its metadata, causing metadata under flow.
[Fix]
The fix is to ensure after calling btrfs_add_ordered_extent(), we only
call error handler after increasing the iteration offset, so that
cleanup range won't cover any created ordered extent.
|<------------------ delalloc range --------------------------->|
| OE 1 | OE 2 | ... | OE n |
|<----------- ----------->|<---------- cleanup range --------->|
\/
btrfs_finish_ordered_io() range
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Allocate struct backing_dev_info separately instead of embedding it
inside superblock. This unifies handling of bdi among users.
CC: Chris Mason <clm@fb.com>
CC: Josef Bacik <jbacik@fb.com>
CC: David Sterba <dsterba@suse.com>
CC: linux-btrfs@vger.kernel.org
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@fb.com>
The WARN_ON and warning from report_reserved_underflow can become very
noisy and is visible unconditionally although this is namely for
debugging. The patch "btrfs: Add WARN_ON for qgroup reserved underflow"
(18dc22c19b) went to 4.11-rc1 and the plan
was to get the fix as well, but this hasn't happened.
CC: Qu Wenruo <quwenruo@cn.fujitsu.com>
Reviewed-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The block layer call chain from submit_bio will check if the write cache
is enabled for the given queue before submitting the flush. This will
add a code to fail fast if its not.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ updated changelog to reflect current code stat, blkdev_issue_flush is
not used yet ]
Signed-off-by: David Sterba <dsterba@suse.com>
The last consumer of nobarriers is removed by the commit [1] and sync
won't fail with EOPNOTSUPP anymore. Thus, now when write cache is write
through it just return success without actually transpiring such a
request to the block device/lun.
[1]
commit b25de9d6da
block: remove BIO_EOPNOTSUPP
And, as the device/lun write cache state may change dynamically saving
such as state won't help either. So deleting the member nobarriers.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When scrubbing a RAID5 which has recoverable data corruption (only one
data stripe is corrupted), sometimes scrub will report more csum errors
than expected. Sometimes even unrecoverable error will be reported.
The problem can be easily reproduced by the following steps:
1) Create a btrfs with RAID5 data profile with 3 devs
2) Mount it with nospace_cache or space_cache=v2
To avoid extra data space usage.
3) Create a 128K file and sync the fs, unmount it
Now the 128K file lies at the beginning of the data chunk
4) Locate the physical bytenr of data chunk on dev3
Dev3 is the 1st data stripe.
5) Corrupt the first 64K of the data chunk stripe on dev3
6) Mount the fs and scrub it
The correct csum error number should be 16 (assuming using x86_64).
Larger csum error number can be reported in a 1/3 chance.
And unrecoverable error can also be reported in a 1/10 chance.
The root cause of the problem is RAID5/6 recover code has race
condition, due to the fact that full scrub is initiated per device.
While for other mirror based profiles, each mirror is independent with
each other, so race won't cause any big problem.
For example:
Corrupted | Correct | Correct |
| Scrub dev3 (D1) | Scrub dev2 (D2) | Scrub dev1(P) |
------------------------------------------------------------------------
Read out D1 |Read out D2 |Read full stripe |
Check csum |Check csum |Check parity |
Csum mismatch |Csum match, continue |Parity mismatch |
handle_errored_block | |handle_errored_block |
Read out full stripe | | Read out full stripe|
D1 csum error(err++) | | D1 csum error(err++)|
Recover D1 | | Recover D1 |
So D1's csum error is accounted twice, just because
handle_errored_block() doesn't have enough protection, and race can happen.
On even worse case, for example D1's recovery code is re-writing
D1/D2/P, and P's recovery code is just reading out full stripe, then we
can cause unrecoverable error.
This patch will use previously introduced lock_full_stripe() and
unlock_full_stripe() to protect the whole scrub_handle_errored_block()
function for RAID56 recovery.
So no extra csum error nor unrecoverable error.
Reported-by: Goffredo Baroncelli <kreijack@libero.it>
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Unlike mirror based profiles, RAID5/6 recovery needs to read out the
whole full stripe.
And if we don't do proper protection, it can easily cause race condition.
Introduce 2 new functions: lock_full_stripe() and unlock_full_stripe()
for RAID5/6.
Which store a rb_tree of mutexes for full stripes, so scrub callers can
use them to lock a full stripe to avoid race.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ minor comment adjustments ]
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_root_item maintains the ctime for root updates. This is not part
of vfs_inode.
Since current_time() uses struct inode* as an argument as Linus
suggested, this cannot be used to update root times unless, we modify
the signature to use inode.
Since btrfs uses nanosecond time granularity, it can also use
ktime_get_real_ts directly to obtain timestamp for the root. It is
necessary to use the timespec time api here because the same
btrfs_set_stack_timespec_*() apis are used for vfs inode times as well.
These can be transitioned to using timespec64 when btrfs internally
changes to use timespec64 as well.
Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Acked-by: David Sterba <dsterba@suse.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_get_extent() never returns NULL pointers, so this code introduces
a static checker warning.
The btrfs_get_extent() is a bit complex, but trust me that it doesn't
return NULLs and also if it did we would trigger the BUG_ON(!em) before
the last return statement.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
[ updated subject ]
Signed-off-by: David Sterba <dsterba@suse.com>
[BUG]
The easist way to reproduce the bug is:
------
# mkfs.btrfs -f $dev -n 16K
# mount $dev $mnt -o inode_cache
# btrfs quota enable $mnt
# btrfs quota rescan -w $mnt
# btrfs qgroup show $mnt
qgroupid rfer excl
-------- ---- ----
0/5 32.00KiB 32.00KiB
^^ Twice the correct value
------
And fstests/btrfs qgroup test group can easily detect them with
inode_cache mount option.
Although some of them are false alerts since old test cases are using
fixed golden output.
While new test cases will use "btrfs check" to detect qgroup mismatch.
[CAUSE]
Inode_cache mount option will make commit_fs_roots() to call
btrfs_save_ino_cache() to update fs/subvol trees, and generate new
delayed refs.
However we call btrfs_qgroup_prepare_account_extents() too early, before
commit_fs_roots().
This makes the "old_roots" for newly generated extents are always NULL.
For freeing extent case, this makes both new_roots and old_roots to be
empty, while correct old_roots should not be empty.
This causing qgroup numbers not decreased correctly.
[FIX]
Modify the timing of calling btrfs_qgroup_prepare_account_extents() to
just before btrfs_qgroup_account_extents(), and add needed delayed_refs
handler.
So qgroup can handle inode_map mount options correctly.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We have already assigned q from bdev_get_queue() so use it.
And rearrange the code for better view.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This is fixing code pieces where we use div_u64 when passing a u64 divisor.
Cc: David Sterba <dsterba@suse.cz>
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Commit 3d8da67817 ("Btrfs: fix divide error upon chunk's stripe_len")
changed stripe_len in struct map_lookup to u64, but didn't update
stripe_len in struct scrub_parity.
This updates the type and switches to div64_u64_rem to match u64 divisor.
Cc: David Sterba <dsterba@suse.cz>
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Now that scrub can fix data errors with the help of parity for raid56
profile, repair during read is able to as well.
Although the mirror num in raid56 scenario has different meanings, i.e.
0 or 1: read data directly
> 1: do recover with parity,
it could be fit into how we repair bad block during read.
The trick is to use BTRFS_MAP_READ instead of BTRFS_MAP_WRITE to get the
device and position on it.
Cc: David Sterba <dsterba@suse.cz>
Tested-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There's a helper to clear whole page, with a arch-specific optimized
code. The replaced cases do not seem to be in performace critical code,
but we still might get some percent gain.
Signed-off-by: David Sterba <dsterba@suse.com>
scrub_setup_recheck_block() calls btrfs_map_sblock() and then accesses
bbio without protection of bio_counter.
This can lead to use-after-free if racing with dev replace cancel.
Fix it by increasing bio_counter before calling btrfs_map_sblock() and
decreasing the bio_counter when corresponding recover is finished.
Cc: Liu Bo <bo.li.liu@oracle.com>
Reported-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When raid56 dev-replace is cancelled by running scrub, we will free
target device without waiting for in-flight bios, causing the following
NULL pointer deference or general protection failure.
BUG: unable to handle kernel NULL pointer dereference at 00000000000005e0
IP: generic_make_request_checks+0x4d/0x610
CPU: 1 PID: 11676 Comm: kworker/u4:14 Tainted: G O 4.11.0-rc2 #72
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.10.2-20170228_101828-anatol 04/01/2014
Workqueue: btrfs-endio-raid56 btrfs_endio_raid56_helper [btrfs]
task: ffff88002875b4c0 task.stack: ffffc90001334000
RIP: 0010:generic_make_request_checks+0x4d/0x610
Call Trace:
? generic_make_request+0xc7/0x360
generic_make_request+0x24/0x360
? generic_make_request+0xc7/0x360
submit_bio+0x64/0x120
? page_in_rbio+0x4d/0x80 [btrfs]
? rbio_orig_end_io+0x80/0x80 [btrfs]
finish_rmw+0x3f4/0x540 [btrfs]
validate_rbio_for_rmw+0x36/0x40 [btrfs]
raid_rmw_end_io+0x7a/0x90 [btrfs]
bio_endio+0x56/0x60
end_workqueue_fn+0x3c/0x40 [btrfs]
btrfs_scrubparity_helper+0xef/0x620 [btrfs]
btrfs_endio_raid56_helper+0xe/0x10 [btrfs]
process_one_work+0x2af/0x720
? process_one_work+0x22b/0x720
worker_thread+0x4b/0x4f0
kthread+0x10f/0x150
? process_one_work+0x720/0x720
? kthread_create_on_node+0x40/0x40
ret_from_fork+0x2e/0x40
RIP: generic_make_request_checks+0x4d/0x610 RSP: ffffc90001337bb8
In btrfs_dev_replace_finishing(), we will call
btrfs_rm_dev_replace_blocked() to wait bios before destroying the target
device when scrub is finished normally.
However when dev-replace is aborted, either due to error or cancelled by
scrub, we didn't wait for bios, this can lead to use-after-free if there
are bios holding the target device.
Furthermore, for raid56 scrub, at least 2 places are calling
btrfs_map_sblock() without protection of bio_counter, leading to the
problem.
This patch fixes the problem:
1) Wait for bio_counter before freeing target device when canceling
replace
2) When calling btrfs_map_sblock() for raid56, use bio_counter to
protect the call.
Cc: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In the following situation, scrub will calculate wrong parity to
overwrite the correct one:
RAID5 full stripe:
Before
| Dev 1 | Dev 2 | Dev 3 |
| Data stripe 1 | Data stripe 2 | Parity Stripe |
--------------------------------------------------- 0
| 0x0000 (Bad) | 0xcdcd | 0x0000 |
--------------------------------------------------- 4K
| 0xcdcd | 0xcdcd | 0x0000 |
...
| 0xcdcd | 0xcdcd | 0x0000 |
--------------------------------------------------- 64K
After scrubbing dev3 only:
| Dev 1 | Dev 2 | Dev 3 |
| Data stripe 1 | Data stripe 2 | Parity Stripe |
--------------------------------------------------- 0
| 0xcdcd (Good) | 0xcdcd | 0xcdcd (Bad) |
--------------------------------------------------- 4K
| 0xcdcd | 0xcdcd | 0x0000 |
...
| 0xcdcd | 0xcdcd | 0x0000 |
--------------------------------------------------- 64K
The reason is that after raid56 read rebuild rbio->stripe_pages are all
correctly recovered (0xcd for data stripes).
However when we check and repair parity in
scrub_parity_check_and_repair(), we will append pages in sparity->spages
list to rbio->bio_pages[], which contains old on-disk data.
And when we submit parity data to disk, we calculate parity using
rbio->bio_pages[] first, if rbio->bio_pages[] not found, then fallback
to rbio->stripe_pages[].
The patch fix it by not appending pages from sparity->spages.
So finish_parity_scrub() will use rbio->stripe_pages[] which is correct.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Newly introduced qgroup reserved space trace points are normally nested
into several common qgroup operations.
While some other trace points are not well placed to co-operate with
them, causing confusing output.
This patch re-arrange trace_btrfs_qgroup_release_data() and
trace_btrfs_qgroup_free_delayed_ref() trace points so they are triggered
before reserved space ones.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Reviewed-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Introduce the following trace points:
qgroup_update_reserve
qgroup_meta_reserve
These trace points are handy to trace qgroup reserve space related
problems.
Also export btrfs_qgroup structure, as now we directly pass btrfs_qgroup
structure to trace points, so that structure needs to be exported.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In raid56 scenario, after trying parity recovery, we didn't set
mirror_num for btrfs_bio with failed mirror_num, hence
end_bio_extent_readpage() will report a random mirror_num in dmesg
log.
Cc: David Sterba <dsterba@suse.cz>
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Scrub repairs data by the unit called scrub_block, which may contain
several pages. Scrub always tries to look up a good copy of a whole
block, but if there's no such copy, it tries to do repair page by page.
If we don't set page's io_error when checking this bad copy, in the last
step, we may skip this page when repairing bad copy from good copy.
Cc: David Sterba <dsterba@suse.cz>
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There are several operations, usually started from ioctls, that cannot
run concurrently. The status is tracked in
mutually_exclusive_operation_running as an atomic_t. We can easily track
the status as one of the per-filesystem flag bits with same
synchronization guarantees.
The conversion replaces:
* atomic_xchg(..., 1) -> test_and_set_bit(FLAG, ...)
* atomic_set(..., 0) -> clear_bit(FLAG, ...)
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We are facing the same problem with EDQUOT which was experienced with
ENOSPC. Not sure if we require a full ticketing system such as ENOSPC, but
here is a quick fix, which may be too big a hammer.
Quotas are reserved during the start of an operation, incrementing
qg->reserved. However, it is written to disk in a commit_transaction
which could take as long as commit_interval. In the meantime there
could be deletions which are not accounted for because deletions are
accounted for only while committed (free_refroot). So, when we get
a EDQUOT flush the data to disk and try again.
This fixes fstests btrfs/139.
Here is a sample script which shows this issue.
DEVICE=/dev/vdb
MOUNTPOINT=/mnt
TESTVOL=$MOUNTPOINT/tmp
QUOTA=5
PROG=btrfs
DD_BS="4k"
DD_COUNT="256"
RUN_TIMES=5000
mkfs.btrfs -f $DEVICE
mount -o commit=240 $DEVICE $MOUNTPOINT
$PROG subvolume create $TESTVOL
$PROG quota enable $TESTVOL
$PROG qgroup limit ${QUOTA}G $TESTVOL
typeset -i DD_RUN_GOOD
typeset -i QUOTA
function _check_cmd() {
if [[ ${?} > 0 ]]; then
echo -n "$(date) E: Running previous command"
echo ${*}
echo "Without sync"
$PROG qgroup show -pcreFf ${TESTVOL}
echo "With sync"
$PROG qgroup show -pcreFf --sync ${TESTVOL}
exit 1
fi
}
while true; do
DD_RUN_GOOD=$RUN_TIMES
while (( ${DD_RUN_GOOD} != 0 )); do
dd if=/dev/zero of=${TESTVOL}/quotatest${DD_RUN_GOOD} bs=${DD_BS} count=${DD_COUNT}
_check_cmd "dd if=/dev/zero of=${TESTVOL}/quotatest${DD_RUN_GOOD} bs=${DD_BS} count=${DD_COUNT}"
DD_RUN_GOOD=(${DD_RUN_GOOD}-1)
done
$PROG qgroup show -pcref $TESTVOL
echo "----------- Cleanup ---------- "
rm $TESTVOL/quotatest*
done
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Reviewed-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Define the SEQ_LAST macro to replace (u64)-1 in places where said
value triggers a special-case ref search behavior.
Signed-off-by: Edmund Nadolski <enadolski@suse.com>
Reviewed-by: Jeff Mahoney <jeffm@suse.com>
Reviewed-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Replace hardcoded numeric values for __merge_refs 'mode' argument
with descriptive constants.
Signed-off-by: Edmund Nadolski <enadolski@suse.com>
Reviewed-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The members have been effectively unused since "Btrfs: rework qgroup
accounting" (fcebe4562d), there's no substitute for
assert_qgroups_uptodate so it's removed as well.
Reviewed-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The name is misleading and the local variable serves no purpose.
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We can preallocate the node so insertion does not have to do that under
the lock. The GFP flags for the global radix tree are initialized to
GFP_NOFS & ~__GFP_DIRECT_RECLAIM
but we can use GFP_KERNEL, because readahead is optional and not on any
critical writeout path.
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We can preallocate the node so insertion does not have to do that under
the lock. The GFP flags for the per-device radix tree are initialized to
GFP_NOFS & ~__GFP_DIRECT_RECLAIM
but we can use GFP_KERNEL, same as an allocation above anyway, but also
because readahead is optional and not on any critical writeout path.
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Code cleanup.
The code block is for !(*flags & MS_RDONLY). We don't need
to check it again.
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We also don't bother to flush free space cache while with free space
tree.
Cc: David Sterba <dsterba@suse.cz>
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
These two BUG_ON()s would never be true, ensured by callers' logic.
Reviewed-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This adds a helper to show directly whether ops require full stripe.
Reviewed-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
With this, we can avoid allocating memory for dev replace copies if the
target dev is not available.
Reviewed-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Since this part is mostly independent, this moves it to a separate
function.
Reviewed-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
As the part of getting extra mirror in __btrfs_map_block is
independent, this puts it into a separate function.
Reviewed-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Since DISCARD is not as important as an operation like write, we don't
copy it to target device during replace, and it makes __btrfs_map_block
less complex.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We have similar code here and there, this merges them into a helper.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
While debugging truncate problems, I found that these tracepoints could
help us quickly know what went wrong.
Two sets of tracepoints are created to track regular/prealloc file item
and inline file item respectively, I put inline as a separate one since
what inline file items cares about are way less than the regular one.
This adds four tracepoints:
- btrfs_get_extent_show_fi_regular
- btrfs_get_extent_show_fi_inline
- btrfs_truncate_show_fi_regular
- btrfs_truncate_show_fi_inline
Cc: David Sterba <dsterba@suse.cz>
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ formatting adjustments ]
Signed-off-by: David Sterba <dsterba@suse.com>
refcount_t type and corresponding API should be
used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.
Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David Windsor <dwindsor@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
refcount_t type and corresponding API should be
used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.
Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David Windsor <dwindsor@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
refcount_t type and corresponding API should be
used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.
Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David Windsor <dwindsor@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
refcount_t type and corresponding API should be
used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.
Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David Windsor <dwindsor@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
refcount_t type and corresponding API should be
used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.
Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David Windsor <dwindsor@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
refcount_t type and corresponding API should be
used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.
Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David Windsor <dwindsor@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
refcount_t type and corresponding API should be
used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.
Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David Windsor <dwindsor@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
refcount_t type and corresponding API should be
used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.
Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David Windsor <dwindsor@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
refcount_t type and corresponding API should be
used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.
Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David Windsor <dwindsor@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
refcount_t type and corresponding API should be
used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.
Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David Windsor <dwindsor@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
refcount_t type and corresponding API should be
used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.
Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David Windsor <dwindsor@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
refcount_t type and corresponding API should be
used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.
Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David Windsor <dwindsor@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
refcount_t type and corresponding API should be
used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.
Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David Windsor <dwindsor@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
refcount_t type and corresponding API should be
used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.
Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David Windsor <dwindsor@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
refcount_t type and corresponding API should be
used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.
Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David Windsor <dwindsor@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
refcount_t type and corresponding API should be
used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.
Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David Windsor <dwindsor@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
After 76b42abbf7 ("Btrfs: fix data loss after truncate when using the
no-holes feature"),
For either NO_HOLES or inline extents, we've set last_size to newsize to
avoid data loss after remount or inode got evicted and read again, thus,
we don't need this check anymore.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
If your filesystem has, eg, data:raid0 metadata:raid1, and you run "btrfs
balance -dconvert=raid1", the meta.target field will be uninitialized.
That's otherwise ok, as it's unused except for this warning.
Thus, let's use the existing set of raid levels for the comparison.
As a side effect, non-convert balances will now nag about data>metadata.
Signed-off-by: Adam Borowski <kilobyte@angband.pl>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Pull btrfs fixes from Chris Mason:
"Dave Sterba collected a few more fixes for the last rc.
These aren't marked for stable, but I'm putting them in with a batch
were testing/sending by hand for this release"
* 'for-linus-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
Btrfs: fix potential use-after-free for cloned bio
Btrfs: fix segmentation fault when doing dio read
Btrfs: fix invalid dereference in btrfs_retry_endio
btrfs: drop the nossd flag when remounting with -o ssd
KASAN reports that there is a use-after-free case of bio in btrfs_map_bio.
If we need to submit IOs to several disks at a time, the original bio
would get cloned and mapped to the destination disk, but we really should
use the original bio instead of a cloned bio to do the sanity check
because cloned bios are likely to be freed by its endio.
Reported-by: Diego <diegocg@gmail.com>
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Commit 2dabb32484 ("Btrfs: Direct I/O read: Work on sectorsized blocks")
introduced this bug during iterating bio pages in dio read's endio hook,
and it could end up with segment fault of the dio reading task.
So the reason is 'if (nr_sectors--)', and it makes the code assume that
there is one more block in the same page, so page offset is increased and
the bio which is created to repair the bad block then has an incorrect
bvec.bv_offset, and a later access of the page content would throw a
segmentation fault.
This also adds ASSERT to check page offset against page size.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When doing directIO repair, we have this oops:
[ 1458.532816] general protection fault: 0000 [#1] SMP
...
[ 1458.536291] Workqueue: btrfs-endio-repair btrfs_endio_repair_helper [btrfs]
[ 1458.536893] task: ffff88082a42d100 task.stack: ffffc90002b3c000
[ 1458.537499] RIP: 0010:btrfs_retry_endio+0x7e/0x1a0 [btrfs]
...
[ 1458.543261] Call Trace:
[ 1458.543958] ? rcu_read_lock_sched_held+0xc4/0xd0
[ 1458.544374] bio_endio+0xed/0x100
[ 1458.544750] end_workqueue_fn+0x3c/0x40 [btrfs]
[ 1458.545257] normal_work_helper+0x9f/0x900 [btrfs]
[ 1458.545762] btrfs_endio_repair_helper+0x12/0x20 [btrfs]
[ 1458.546224] process_one_work+0x34d/0xb70
[ 1458.546570] ? process_one_work+0x29e/0xb70
[ 1458.546938] worker_thread+0x1cf/0x960
[ 1458.547263] ? process_one_work+0xb70/0xb70
[ 1458.547624] kthread+0x17d/0x180
[ 1458.547909] ? kthread_create_on_node+0x70/0x70
[ 1458.548300] ret_from_fork+0x31/0x40
It turns out that btrfs_retry_endio is trying to get inode from a directIO
page.
This fixes the problem by using the saved inode pointer, done->inode.
btrfs_retry_endio_nocsum has the same problem, and it's fixed as well.
Also cleanup unused @start (which is too trivial for a separate patch).
Cc: David Sterba <dsterba@suse.cz>
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The opposite case was already handled right in the very next switch entry.
And also when turning on nossd, drop ssd_spread.
Reported-by: Hans van Kranenburg <hans.van.kranenburg@mendix.com>
Signed-off-by: Adam Borowski <kilobyte@angband.pl>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Pull btrfs fixes from Chris Mason:
"We have three small fixes queued up in my for-linus-4.11 branch"
* 'for-linus-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
Btrfs: fix an integer overflow check
btrfs: Change qgroup_meta_rsv to 64bit
Btrfs: bring back repair during read
This isn't super serious because you need CAP_ADMIN to run this code.
I added this integer overflow check last year but apparently I am
rubbish at writing integer overflow checks... There are two issues.
First, access_ok() works on unsigned long type and not u64 so on 32 bit
systems the access_ok() could be checking a truncated size. The other
issue is that we should be using a stricter limit so we don't overflow
the kzalloc() setting ctx->clone_roots later in the function after the
access_ok():
alloc_size = sizeof(struct clone_root) * (arg->clone_sources_count + 1);
sctx->clone_roots = kzalloc(alloc_size, GFP_KERNEL | __GFP_NOWARN);
Fixes: f5ecec3ce2 ("btrfs: send: silence an integer overflow warning")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ added comment ]
Signed-off-by: David Sterba <dsterba@suse.com>
Using an int value is causing qg->reserved to become negative and
exclusive -EDQUOT to be reached prematurely.
This affects exclusive qgroups only.
TEST CASE:
DEVICE=/dev/vdb
MOUNTPOINT=/mnt
SUBVOL=$MOUNTPOINT/tmp
umount $SUBVOL
umount $MOUNTPOINT
mkfs.btrfs -f $DEVICE
mount /dev/vdb $MOUNTPOINT
btrfs quota enable $MOUNTPOINT
btrfs subvol create $SUBVOL
umount $MOUNTPOINT
mount /dev/vdb $MOUNTPOINT
mount -o subvol=tmp $DEVICE $SUBVOL
btrfs qgroup limit -e 3G $SUBVOL
btrfs quota rescan /mnt -w
for i in `seq 1 44000`; do
dd if=/dev/zero of=/mnt/tmp/test_$i bs=10k count=1
if [[ $? > 0 ]]; then
btrfs qgroup show -pcref $SUBVOL
exit 1
fi
done
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
[ add reproducer to changelog ]
Signed-off-by: David Sterba <dsterba@suse.com>
Commit 20a7db8ab3 ("btrfs: add dummy callback for readpage_io_failed
and drop checks") made a cleanup around readpage_io_failed_hook, and
it was supposed to keep the original sematics, but it also
unexpectedly disabled repair during read for dup, raid1 and raid10.
This fixes the problem by letting data's inode call the generic
readpage_io_failed callback by returning -EAGAIN from its
readpage_io_failed_hook in order to notify end_bio_extent_readpage to
do the rest. We don't call it directly because the generic one takes
an offset from end_bio_extent_readpage() to calculate the index in the
checksum array and inode's readpage_io_failed_hook doesn't offer that
offset.
Cc: David Sterba <dsterba@suse.cz>
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ keep the const function attribute ]
Signed-off-by: David Sterba <dsterba@suse.com>
Pull btrfs fixes from Chris Mason:
"Zygo tracked down a very old bug with inline compressed extents.
I didn't tag this one for stable because I want to do individual
tested backports. It's a little tricky and I'd rather do some extra
testing on it along the way"
* 'for-linus-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
btrfs: add missing memset while reading compressed inline extents
Btrfs: fix regression in lock_delalloc_pages
btrfs: remove btrfs_err_str function from uapi/linux/btrfs.h
This is a story about 4 distinct (and very old) btrfs bugs.
Commit c8b978188c ("Btrfs: Add zlib compression support") added
three data corruption bugs for inline extents (bugs #1-3).
Commit 93c82d5750 ("Btrfs: zero page past end of inline file items")
fixed bug #1: uncompressed inline extents followed by a hole and more
extents could get non-zero data in the hole as they were read. The fix
was to add a memset in btrfs_get_extent to zero out the hole.
Commit 166ae5a418 ("btrfs: fix inline compressed read err corruption")
fixed bug #2: compressed inline extents which contained non-zero bytes
might be replaced with zero bytes in some cases. This patch removed an
unhelpful memset from uncompress_inline, but the case where memset is
required was missed.
There is also a memset in the decompression code, but this only covers
decompressed data that is shorter than the ram_bytes from the extent
ref record. This memset doesn't cover the region between the end of the
decompressed data and the end of the page. It has also moved around a
few times over the years, so there's no single patch to refer to.
This patch fixes bug #3: compressed inline extents followed by a hole
and more extents could get non-zero data in the hole as they were read
(i.e. bug #3 is the same as bug #1, but s/uncompressed/compressed/).
The fix is the same: zero out the hole in the compressed case too,
by putting a memset back in uncompress_inline, but this time with
correct parameters.
The last and oldest bug, bug #0, is the cause of the offending inline
extent/hole/extent pattern. Bug #0 is a subtle and mostly-harmless quirk
of behavior somewhere in the btrfs write code. In a few special cases,
an inline extent and hole are allowed to persist where they normally
would be combined with later extents in the file.
A fast reproducer for bug #0 is presented below. A few offending extents
are also created in the wild during large rsync transfers with the -S
flag. A Linux kernel build (git checkout; make allyesconfig; make -j8)
will produce a handful of offending files as well. Once an offending
file is created, it can present different content to userspace each
time it is read.
Bug #0 is at least 4 and possibly 8 years old. I verified every vX.Y
kernel back to v3.5 has this behavior. There are fossil records of this
bug's effects in commits all the way back to v2.6.32. I have no reason
to believe bug #0 wasn't present at the beginning of btrfs compression
support in v2.6.29, but I can't easily test kernels that old to be sure.
It is not clear whether bug #0 is worth fixing. A fix would likely
require injecting extra reads into currently write-only paths, and most
of the exceptional cases caused by bug #0 are already handled now.
Whether we like them or not, bug #0's inline extents followed by holes
are part of the btrfs de-facto disk format now, and we need to be able
to read them without data corruption or an infoleak. So enough about
bug #0, let's get back to bug #3 (this patch).
An example of on-disk structure leading to data corruption found in
the wild:
item 61 key (606890 INODE_ITEM 0) itemoff 9662 itemsize 160
inode generation 50 transid 50 size 47424 nbytes 49141
block group 0 mode 100644 links 1 uid 0 gid 0
rdev 0 flags 0x0(none)
item 62 key (606890 INODE_REF 603050) itemoff 9642 itemsize 20
inode ref index 3 namelen 10 name: DB_File.so
item 63 key (606890 EXTENT_DATA 0) itemoff 8280 itemsize 1362
inline extent data size 1341 ram 4085 compress(zlib)
item 64 key (606890 EXTENT_DATA 4096) itemoff 8227 itemsize 53
extent data disk byte 5367308288 nr 20480
extent data offset 0 nr 45056 ram 45056
extent compression(zlib)
Different data appears in userspace during each read of the 11 bytes
between 4085 and 4096. The extent in item 63 is not long enough to
fill the first page of the file, so a memset is required to fill the
space between item 63 (ending at 4085) and item 64 (beginning at 4096)
with zero.
Here is a reproducer from Liu Bo, which demonstrates another method
of creating the same inline extent and hole pattern:
Using 'page_poison=on' kernel command line (or enable
CONFIG_PAGE_POISONING) run the following:
# touch foo
# chattr +c foo
# xfs_io -f -c "pwrite -W 0 1000" foo
# xfs_io -f -c "falloc 4 8188" foo
# od -x foo
# echo 3 >/proc/sys/vm/drop_caches
# od -x foo
This produce the following on my box:
Correct output: file contains 1000 data bytes followed
by zeros:
0000000 cdcd cdcd cdcd cdcd cdcd cdcd cdcd cdcd
*
0001740 cdcd cdcd cdcd cdcd 0000 0000 0000 0000
0001760 0000 0000 0000 0000 0000 0000 0000 0000
*
0020000
Actual output: the data after the first 1000 bytes
will be different each run:
0000000 cdcd cdcd cdcd cdcd cdcd cdcd cdcd cdcd
*
0001740 cdcd cdcd cdcd cdcd 6c63 7400 635f 006d
0001760 5f74 6f43 7400 435f 0053 5f74 7363 7400
0002000 435f 0056 5f74 6164 7400 645f 0062 5f74
(...)
Signed-off-by: Zygo Blaxell <ce3g8jdj@umail.furryterror.org>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: Chris Mason <clm@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
The bug is a regression after commit
(da2c7009f6 "btrfs: teach __process_pages_contig about PAGE_LOCK operation")
and commit
(76c0021db8 "Btrfs: use helper to simplify lock/unlock pages").
So if the dirty pages which are under writeback got truncated partially
before we lock the dirty pages, we couldn't find all pages mapping to the
delalloc range, and the bug didn't return an error so it kept going on and
found that the delalloc range got truncated and got to unlock the dirty
pages, and then the ASSERT could caught the error, and showed
-----------------------------------------------------------------------------
assertion failed: page_ops & PAGE_LOCK, file: fs/btrfs/extent_io.c, line: 1716
-----------------------------------------------------------------------------
This fixes the bug by returning the proper -EAGAIN.
Cc: David Sterba <dsterba@suse.com>
Reported-by: Dave Jones <davej@codemonkey.org.uk>
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Pull vfs 'statx()' update from Al Viro.
This adds the new extended stat() interface that internally subsumes our
previous stat interfaces, and allows user mode to specify in more detail
what kind of information it wants.
It also allows for some explicit synchronization information to be
passed to the filesystem, which can be relevant for network filesystems:
is the cached value ok, or do you need open/close consistency, or what?
From David Howells.
Andreas Dilger points out that the first version of the extended statx
interface was posted June 29, 2010:
https://www.spinics.net/lists/linux-fsdevel/msg33831.html
* 'rebased-statx' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
statx: Add a system call to make enhanced file info available
Pull sched.h split-up from Ingo Molnar:
"The point of these changes is to significantly reduce the
<linux/sched.h> header footprint, to speed up the kernel build and to
have a cleaner header structure.
After these changes the new <linux/sched.h>'s typical preprocessed
size goes down from a previous ~0.68 MB (~22K lines) to ~0.45 MB (~15K
lines), which is around 40% faster to build on typical configs.
Not much changed from the last version (-v2) posted three weeks ago: I
eliminated quirks, backmerged fixes plus I rebased it to an upstream
SHA1 from yesterday that includes most changes queued up in -next plus
all sched.h changes that were pending from Andrew.
I've re-tested the series both on x86 and on cross-arch defconfigs,
and did a bisectability test at a number of random points.
I tried to test as many build configurations as possible, but some
build breakage is probably still left - but it should be mostly
limited to architectures that have no cross-compiler binaries
available on kernel.org, and non-default configurations"
* 'WIP.sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (146 commits)
sched/headers: Clean up <linux/sched.h>
sched/headers: Remove #ifdefs from <linux/sched.h>
sched/headers: Remove the <linux/topology.h> include from <linux/sched.h>
sched/headers, hrtimer: Remove the <linux/wait.h> include from <linux/hrtimer.h>
sched/headers, x86/apic: Remove the <linux/pm.h> header inclusion from <asm/apic.h>
sched/headers, timers: Remove the <linux/sysctl.h> include from <linux/timer.h>
sched/headers: Remove <linux/magic.h> from <linux/sched/task_stack.h>
sched/headers: Remove <linux/sched.h> from <linux/sched/init.h>
sched/core: Remove unused prefetch_stack()
sched/headers: Remove <linux/rculist.h> from <linux/sched.h>
sched/headers: Remove the 'init_pid_ns' prototype from <linux/sched.h>
sched/headers: Remove <linux/signal.h> from <linux/sched.h>
sched/headers: Remove <linux/rwsem.h> from <linux/sched.h>
sched/headers: Remove the runqueue_is_locked() prototype
sched/headers: Remove <linux/sched.h> from <linux/sched/hotplug.h>
sched/headers: Remove <linux/sched.h> from <linux/sched/debug.h>
sched/headers: Remove <linux/sched.h> from <linux/sched/nohz.h>
sched/headers: Remove <linux/sched.h> from <linux/sched/stat.h>
sched/headers: Remove the <linux/gfp.h> include from <linux/sched.h>
sched/headers: Remove <linux/rtmutex.h> from <linux/sched.h>
...
Add a system call to make extended file information available, including
file creation and some attribute flags where available through the
underlying filesystem.
The getattr inode operation is altered to take two additional arguments: a
u32 request_mask and an unsigned int flags that indicate the
synchronisation mode. This change is propagated to the vfs_getattr*()
function.
Functions like vfs_stat() are now inline wrappers around new functions
vfs_statx() and vfs_statx_fd() to reduce stack usage.
========
OVERVIEW
========
The idea was initially proposed as a set of xattrs that could be retrieved
with getxattr(), but the general preference proved to be for a new syscall
with an extended stat structure.
A number of requests were gathered for features to be included. The
following have been included:
(1) Make the fields a consistent size on all arches and make them large.
(2) Spare space, request flags and information flags are provided for
future expansion.
(3) Better support for the y2038 problem [Arnd Bergmann] (tv_sec is an
__s64).
(4) Creation time: The SMB protocol carries the creation time, which could
be exported by Samba, which will in turn help CIFS make use of
FS-Cache as that can be used for coherency data (stx_btime).
This is also specified in NFSv4 as a recommended attribute and could
be exported by NFSD [Steve French].
(5) Lightweight stat: Ask for just those details of interest, and allow a
netfs (such as NFS) to approximate anything not of interest, possibly
without going to the server [Trond Myklebust, Ulrich Drepper, Andreas
Dilger] (AT_STATX_DONT_SYNC).
(6) Heavyweight stat: Force a netfs to go to the server, even if it thinks
its cached attributes are up to date [Trond Myklebust]
(AT_STATX_FORCE_SYNC).
And the following have been left out for future extension:
(7) Data version number: Could be used by userspace NFS servers [Aneesh
Kumar].
Can also be used to modify fill_post_wcc() in NFSD which retrieves
i_version directly, but has just called vfs_getattr(). It could get
it from the kstat struct if it used vfs_xgetattr() instead.
(There's disagreement on the exact semantics of a single field, since
not all filesystems do this the same way).
(8) BSD stat compatibility: Including more fields from the BSD stat such
as creation time (st_btime) and inode generation number (st_gen)
[Jeremy Allison, Bernd Schubert].
(9) Inode generation number: Useful for FUSE and userspace NFS servers
[Bernd Schubert].
(This was asked for but later deemed unnecessary with the
open-by-handle capability available and caused disagreement as to
whether it's a security hole or not).
(10) Extra coherency data may be useful in making backups [Andreas Dilger].
(No particular data were offered, but things like last backup
timestamp, the data version number and the DOS archive bit would come
into this category).
(11) Allow the filesystem to indicate what it can/cannot provide: A
filesystem can now say it doesn't support a standard stat feature if
that isn't available, so if, for instance, inode numbers or UIDs don't
exist or are fabricated locally...
(This requires a separate system call - I have an fsinfo() call idea
for this).
(12) Store a 16-byte volume ID in the superblock that can be returned in
struct xstat [Steve French].
(Deferred to fsinfo).
(13) Include granularity fields in the time data to indicate the
granularity of each of the times (NFSv4 time_delta) [Steve French].
(Deferred to fsinfo).
(14) FS_IOC_GETFLAGS value. These could be translated to BSD's st_flags.
Note that the Linux IOC flags are a mess and filesystems such as Ext4
define flags that aren't in linux/fs.h, so translation in the kernel
may be a necessity (or, possibly, we provide the filesystem type too).
(Some attributes are made available in stx_attributes, but the general
feeling was that the IOC flags were to ext[234]-specific and shouldn't
be exposed through statx this way).
(15) Mask of features available on file (eg: ACLs, seclabel) [Brad Boyer,
Michael Kerrisk].
(Deferred, probably to fsinfo. Finding out if there's an ACL or
seclabal might require extra filesystem operations).
(16) Femtosecond-resolution timestamps [Dave Chinner].
(A __reserved field has been left in the statx_timestamp struct for
this - if there proves to be a need).
(17) A set multiple attributes syscall to go with this.
===============
NEW SYSTEM CALL
===============
The new system call is:
int ret = statx(int dfd,
const char *filename,
unsigned int flags,
unsigned int mask,
struct statx *buffer);
The dfd, filename and flags parameters indicate the file to query, in a
similar way to fstatat(). There is no equivalent of lstat() as that can be
emulated with statx() by passing AT_SYMLINK_NOFOLLOW in flags. There is
also no equivalent of fstat() as that can be emulated by passing a NULL
filename to statx() with the fd of interest in dfd.
Whether or not statx() synchronises the attributes with the backing store
can be controlled by OR'ing a value into the flags argument (this typically
only affects network filesystems):
(1) AT_STATX_SYNC_AS_STAT tells statx() to behave as stat() does in this
respect.
(2) AT_STATX_FORCE_SYNC will require a network filesystem to synchronise
its attributes with the server - which might require data writeback to
occur to get the timestamps correct.
(3) AT_STATX_DONT_SYNC will suppress synchronisation with the server in a
network filesystem. The resulting values should be considered
approximate.
mask is a bitmask indicating the fields in struct statx that are of
interest to the caller. The user should set this to STATX_BASIC_STATS to
get the basic set returned by stat(). It should be noted that asking for
more information may entail extra I/O operations.
buffer points to the destination for the data. This must be 256 bytes in
size.
======================
MAIN ATTRIBUTES RECORD
======================
The following structures are defined in which to return the main attribute
set:
struct statx_timestamp {
__s64 tv_sec;
__s32 tv_nsec;
__s32 __reserved;
};
struct statx {
__u32 stx_mask;
__u32 stx_blksize;
__u64 stx_attributes;
__u32 stx_nlink;
__u32 stx_uid;
__u32 stx_gid;
__u16 stx_mode;
__u16 __spare0[1];
__u64 stx_ino;
__u64 stx_size;
__u64 stx_blocks;
__u64 __spare1[1];
struct statx_timestamp stx_atime;
struct statx_timestamp stx_btime;
struct statx_timestamp stx_ctime;
struct statx_timestamp stx_mtime;
__u32 stx_rdev_major;
__u32 stx_rdev_minor;
__u32 stx_dev_major;
__u32 stx_dev_minor;
__u64 __spare2[14];
};
The defined bits in request_mask and stx_mask are:
STATX_TYPE Want/got stx_mode & S_IFMT
STATX_MODE Want/got stx_mode & ~S_IFMT
STATX_NLINK Want/got stx_nlink
STATX_UID Want/got stx_uid
STATX_GID Want/got stx_gid
STATX_ATIME Want/got stx_atime{,_ns}
STATX_MTIME Want/got stx_mtime{,_ns}
STATX_CTIME Want/got stx_ctime{,_ns}
STATX_INO Want/got stx_ino
STATX_SIZE Want/got stx_size
STATX_BLOCKS Want/got stx_blocks
STATX_BASIC_STATS [The stuff in the normal stat struct]
STATX_BTIME Want/got stx_btime{,_ns}
STATX_ALL [All currently available stuff]
stx_btime is the file creation time, stx_mask is a bitmask indicating the
data provided and __spares*[] are where as-yet undefined fields can be
placed.
Time fields are structures with separate seconds and nanoseconds fields
plus a reserved field in case we want to add even finer resolution. Note
that times will be negative if before 1970; in such a case, the nanosecond
fields will also be negative if not zero.
The bits defined in the stx_attributes field convey information about a
file, how it is accessed, where it is and what it does. The following
attributes map to FS_*_FL flags and are the same numerical value:
STATX_ATTR_COMPRESSED File is compressed by the fs
STATX_ATTR_IMMUTABLE File is marked immutable
STATX_ATTR_APPEND File is append-only
STATX_ATTR_NODUMP File is not to be dumped
STATX_ATTR_ENCRYPTED File requires key to decrypt in fs
Within the kernel, the supported flags are listed by:
KSTAT_ATTR_FS_IOC_FLAGS
[Are any other IOC flags of sufficient general interest to be exposed
through this interface?]
New flags include:
STATX_ATTR_AUTOMOUNT Object is an automount trigger
These are for the use of GUI tools that might want to mark files specially,
depending on what they are.
Fields in struct statx come in a number of classes:
(0) stx_dev_*, stx_blksize.
These are local system information and are always available.
(1) stx_mode, stx_nlinks, stx_uid, stx_gid, stx_[amc]time, stx_ino,
stx_size, stx_blocks.
These will be returned whether the caller asks for them or not. The
corresponding bits in stx_mask will be set to indicate whether they
actually have valid values.
If the caller didn't ask for them, then they may be approximated. For
example, NFS won't waste any time updating them from the server,
unless as a byproduct of updating something requested.
If the values don't actually exist for the underlying object (such as
UID or GID on a DOS file), then the bit won't be set in the stx_mask,
even if the caller asked for the value. In such a case, the returned
value will be a fabrication.
Note that there are instances where the type might not be valid, for
instance Windows reparse points.
(2) stx_rdev_*.
This will be set only if stx_mode indicates we're looking at a
blockdev or a chardev, otherwise will be 0.
(3) stx_btime.
Similar to (1), except this will be set to 0 if it doesn't exist.
=======
TESTING
=======
The following test program can be used to test the statx system call:
samples/statx/test-statx.c
Just compile and run, passing it paths to the files you want to examine.
The file is built automatically if CONFIG_SAMPLES is enabled.
Here's some example output. Firstly, an NFS directory that crosses to
another FSID. Note that the AUTOMOUNT attribute is set because transiting
this directory will cause d_automount to be invoked by the VFS.
[root@andromeda ~]# /tmp/test-statx -A /warthog/data
statx(/warthog/data) = 0
results=7ff
Size: 4096 Blocks: 8 IO Block: 1048576 directory
Device: 00:26 Inode: 1703937 Links: 125
Access: (3777/drwxrwxrwx) Uid: 0 Gid: 4041
Access: 2016-11-24 09:02:12.219699527+0000
Modify: 2016-11-17 10:44:36.225653653+0000
Change: 2016-11-17 10:44:36.225653653+0000
Attributes: 0000000000001000 (-------- -------- -------- -------- -------- -------- ---m---- --------)
Secondly, the result of automounting on that directory.
[root@andromeda ~]# /tmp/test-statx /warthog/data
statx(/warthog/data) = 0
results=7ff
Size: 4096 Blocks: 8 IO Block: 1048576 directory
Device: 00:27 Inode: 2 Links: 125
Access: (3777/drwxrwxrwx) Uid: 0 Gid: 4041
Access: 2016-11-24 09:02:12.219699527+0000
Modify: 2016-11-17 10:44:36.225653653+0000
Change: 2016-11-17 10:44:36.225653653+0000
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Pull more btrfs updates from Chris Mason:
"Btrfs round two.
These are mostly a continuation of Dave Sterba's collection of
cleanups, but Filipe also has some bug fixes and performance
improvements"
* 'for-linus-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: (69 commits)
btrfs: add dummy callback for readpage_io_failed and drop checks
btrfs: drop checks for mandatory extent_io_ops callbacks
btrfs: document existence of extent_io ops callbacks
btrfs: let writepage_end_io_hook return void
btrfs: do proper error handling in btrfs_insert_xattr_item
btrfs: handle allocation error in update_dev_stat_item
btrfs: remove BUG_ON from __tree_mod_log_insert
btrfs: derive maximum output size in the compression implementation
btrfs: use predefined limits for calculating maximum number of pages for compression
btrfs: export compression buffer limits in a header
btrfs: merge nr_pages input and output parameter in compress_pages
btrfs: merge length input and output parameter in compress_pages
btrfs: constify name of subvolume in creation helpers
btrfs: constify buffers used by compression helpers
btrfs: constify input buffer of btrfs_csum_data
btrfs: constify device path passed to relevant helpers
btrfs: make btrfs_inode_resume_unlocked_dio take btrfs_inode
btrfs: make btrfs_inode_block_unlocked_dio take btrfs_inode
btrfs: Make btrfs_add_nondir take btrfs_inode
btrfs: Make btrfs_add_link take btrfs_inode
...
Instead of including the full <linux/signal.h>, we are going to include the
types-only <linux/signal_types.h> header in <linux/sched.h>, to further
decouple the scheduler header from the signal headers.
This means that various files which relied on the full <linux/signal.h> need
to be updated to gain an explicit dependency on it.
Update the code that relies on sched.h's inclusion of the <linux/signal.h> header.
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Fix up affected files that include this signal functionality via sched.h.
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Make extent_io_ops::readpage_io_failed_hook callback mandatory and
define a dummy function for btrfs_extent_io_ops. As the failed IO
callback is not performance critical, the branch vs extra trade off does
not hurt.
Signed-off-by: David Sterba <dsterba@suse.com>
We know that eadpage_end_io_hook, submit_bio_hook and merge_bio_hook are
always defined so we can drop the checks before we call them.
Signed-off-by: David Sterba <dsterba@suse.com>
Some of the callbacks defined in btree_extent_io_ops and
btrfs_extent_io_ops do always exist so we don't need to check the
existence before each call. This patch just reorders the definition and
documents which are mandatory/optional.
Signed-off-by: David Sterba <dsterba@suse.com>
There's no error path in any of the instances, always return 0.
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The space check in btrfs_insert_xattr_item is duplicated in it's caller
(do_setxattr) so we won't hit the BUG_ON. Continuing without any check
could be disasterous so turn it to a proper error handling.
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
All callers dereference the 'tm' parameter before it gets to this
function, the NULL check does not make much sense here.
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The value of max_out can be calculated from the parameters passed to the
compressors, which is number of pages and the page size, and we don't
have to needlessly pass it around.
Signed-off-by: David Sterba <dsterba@suse.com>
Move the buffer limit definitions out of compress_file_range.
Reviewed-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The parameter saying how many pages can be allocated at maximum can be
merged with the output page counter, to save some stack space. The
compression implementation will sink the parameter to a local variable
so everything works as before.
The nr_pages variables can also be simply merged in compress_file_range
into one.
Signed-off-by: David Sterba <dsterba@suse.com>
The length parameter is basically duplicated for input and output in the
top level caller of the compress_pages chain. We can simply use one
variable for that and reduce stack consumption. The compression
implementation will sink the parameter to a local variable so everything
works as before.
Signed-off-by: David Sterba <dsterba@suse.com>
In addition to changing the signature, this patch also switches
all the functions which are used as an argument to also take btrfs_inode.
Namely those are: btrfs_get_extent and btrfs_get_extent_filemap.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Replace all 1 << inode->i_blkbits and (1 << inode->i_blkbits) in fs
branch.
This patch also fixes multiple checkpatch warnings: WARNING: Prefer
'unsigned int' to bare use of 'unsigned'
Thanks to Andrew Morton for suggesting more appropriate function instead
of macro.
[geliangtang@gmail.com: truncate: use i_blocksize()]
Link: http://lkml.kernel.org/r/9c8b2cd83c8f5653805d43debde9fa8817e02fc4.1484895804.git.geliangtang@gmail.com
Link: http://lkml.kernel.org/r/1481319905-10126-1-git-send-email-fabf@skynet.be
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull btrfs updates from Chris Mason:
"This has a series of fixes and cleanups that Dave Sterba has been
collecting.
There is a pretty big variety here, cleaning up internal APIs and
fixing corner cases"
* 'for-linus-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: (124 commits)
Btrfs: use the correct type when creating cow dio extent
Btrfs: fix deadlock between dedup on same file and starting writeback
btrfs: use btrfs_debug instead of pr_debug in transaction abort
btrfs: btrfs_truncate_free_space_cache always allocates path
btrfs: free-space-cache, clean up unnecessary root arguments
btrfs: convert btrfs_inc_block_group_ro to accept fs_info
btrfs: flush_space always takes fs_info->fs_root
btrfs: pass fs_info to (more) routines that are only called with extent_root
btrfs: qgroup: Move half of the qgroup accounting time out of commit trans
btrfs: remove unused parameter from adjust_slots_upwards
btrfs: remove unused parameters from __btrfs_write_out_cache
btrfs: remove unused parameter from cleanup_write_cache_enospc
btrfs: remove unused parameter from __add_inode_ref
btrfs: remove unused parameter from clone_copy_inline_extent
btrfs: remove unused parameters from btrfs_cmp_data
btrfs: remove unused parameter from __add_inline_refs
btrfs: remove unused parameters from scrub_setup_wr_ctx
btrfs: remove unused parameter from create_snapshot
btrfs: remove unused parameter from init_first_rw_device
btrfs: remove unused parameter from __btrfs_alloc_chunk
...
->fault(), ->page_mkwrite(), and ->pfn_mkwrite() calls do not need to
take a vma and vmf parameter when the vma already resides in vmf.
Remove the vma parameter to simplify things.
[arnd@arndb.de: fix ARM build]
Link: http://lkml.kernel.org/r/20170125223558.1451224-1-arnd@arndb.de
Link: http://lkml.kernel.org/r/148521301778.19116.10840599906674778980.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Darrick J. Wong <darrick.wong@oracle.com>
Cc: Matthew Wilcox <mawilcox@microsoft.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Jan Kara <jack@suse.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Before attempting to split a leaf we try to migrate items from the leaf to
its right and left siblings. We start by trying to move items into the
rigth sibling and, if the new item is meant to be inserted at the end of
our leaf, we try to free from our leaf an amount of bytes equal to the
number of bytes used by the new item, by setting the variable space_needed
to the byte size of that new item. However if we fail to move enough items
to the right sibling due to lack of space in that sibling, we then try
to move items into the left sibling, and in that case we try to free
an amount equal to the size of the new item from our leaf, when we need
only to free an amount corresponding to the size of the new item minus
the current free space of our leaf. So make sure that before we try to
move items to the left sibling we do set the variable space_needed with
a value corresponding to the new item's size minus the leaf's current
free space.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
If we have a file with an implicit hole (NO_HOLES feature enabled) that
has an extent following the hole, delayed writes against regions of the
file behind the hole happened before but were not yet flushed and then
we truncate the file to a smaller size that lies inside the hole, we
end up persisting a wrong disk_i_size value for our inode that leads to
data loss after umounting and mounting again the filesystem or after
the inode is evicted and loaded again.
This happens because at inode.c:btrfs_truncate_inode_items() we end up
setting last_size to the offset of the extent that we deleted and that
followed the hole. We then pass that value to btrfs_ordered_update_i_size()
which updates the inode's disk_i_size to a value smaller then the offset
of the buffered (delayed) writes.
Example reproducer:
$ mkfs.btrfs -f /dev/sdb
$ mount /dev/sdb /mnt
$ xfs_io -f -c "pwrite -S 0x01 0K 32K" /mnt/foo
$ xfs_io -d -c "pwrite -S 0x02 -b 32K 64K 32K" /mnt/foo
$ xfs_io -c "truncate 60K" /mnt/foo
--> inode's disk_i_size updated to 0
$ md5sum /mnt/foo
3c5ca3c3ab42f4b04d7e7eb0b0d4d806 /mnt/foo
$ umount /dev/sdb
$ mount /dev/sdb /mnt
$ md5sum /mnt/foo
d41d8cd98f00b204e9800998ecf8427e /mnt/foo
--> Empty file, all data lost!
Cc: <stable@vger.kernel.org> # 3.14+
Fixes: 16e7549f04 ("Btrfs: incompatible format change to remove hole extents")
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
When using the NO_HOLES feature, during an incremental send we often issue
write operations for holes when we should not, because that range is already
a hole in the destination snapshot. While that does not change the contents
of the file at the receiver, it avoids preservation of file holes, leading
to wasted disk space and extra IO during send/receive.
A couple examples where the holes are not preserved follows.
$ mkfs.btrfs -O no-holes -f /dev/sdb
$ mount /dev/sdb /mnt
$ xfs_io -f -c "pwrite -S 0xaa 0 4K" /mnt/foo
$ xfs_io -f -c "pwrite -S 0xaa 0 4K" -c "pwrite -S 0xbb 1028K 4K" /mnt/bar
$ btrfs subvolume snapshot -r /mnt /mnt/snap1
# Now add one new extent to our first test file, increasing its size and
# leaving a 1Mb hole between the first extent and this new extent.
$ xfs_io -c "pwrite -S 0xbb 1028K 4K" /mnt/foo
# Now overwrite the last extent of our second test file.
$ xfs_io -c "pwrite -S 0xcc 1028K 4K" /mnt/bar
$ btrfs subvolume snapshot -r /mnt /mnt/snap2
$ xfs_io -r -c "fiemap -v" /mnt/snap2/foo
/mnt/snap2/foo:
EXT: FILE-OFFSET BLOCK-RANGE TOTAL FLAGS
0: [0..7]: 25088..25095 8 0x2000
1: [8..2055]: hole 2048
2: [2056..2063]: 24576..24583 8 0x2001
$ xfs_io -r -c "fiemap -v" /mnt/snap2/bar
/mnt/snap2/bar:
EXT: FILE-OFFSET BLOCK-RANGE TOTAL FLAGS
0: [0..7]: 25096..25103 8 0x2000
1: [8..2055]: hole 2048
2: [2056..2063]: 24584..24591 8 0x2001
$ btrfs send /mnt/snap1 -f /tmp/1.snap
$ btrfs send -p /mnt/snap1 /mnt/snap2 -f /tmp/2.snap
$ umount /mnt
# It's not relevant to enable no-holes in the new filesystem.
$ mkfs.btrfs -O no-holes -f /dev/sdc
$ mount /dev/sdc /mnt
$ btrfs receive /mnt -f /tmp/1.snap
$ btrfs receive /mnt -f /tmp/2.snap
$ xfs_io -r -c "fiemap -v" /mnt/snap2/foo
/mnt/snap2/foo:
EXT: FILE-OFFSET BLOCK-RANGE TOTAL FLAGS
0: [0..7]: 24576..24583 8 0x2000
1: [8..2063]: 25624..27679 2056 0x1
$ xfs_io -r -c "fiemap -v" /mnt/snap2/bar
/mnt/snap2/bar:
EXT: FILE-OFFSET BLOCK-RANGE TOTAL FLAGS
0: [0..7]: 24584..24591 8 0x2000
1: [8..2063]: 27680..29735 2056 0x1
The holes do not exist in the second filesystem and they were replaced
with extents filled with the byte 0x00, making each file take 1032Kb of
space instead of 8Kb.
So fix this by not issuing the write operations consisting of buffers
filled with the byte 0x00 when the destination snapshot already has a
hole for the respective range.
A test case for fstests will follow soon.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
We log holes explicitly by using file extent items, however when replaying
a log tree, if a logged file extent item corresponds to a hole and the
NO_HOLES feature is enabled we do not need to copy the file extent item
into the fs/subvolume tree, as the absence of such file extent items is
the purpose of the NO_HOLES feature. So skip the copying of file extent
items representing holes when the NO_HOLES feature is enabled.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
When falling back from a nocow write to a regular cow write, we were
leaking the subvolume writers counter in 2 situations, preventing
snapshot creation from ever completing in the future, as it waits
for that counter to go down to zero before the snapshot creation
starts.
Signed-off-by: Robbie Ko <robbieko@synology.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
[Improved changelog and subject]
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Very often we have the checksums for an extent spread in multiple items
in the checksums tree, and currently the algorithm to delete them starts
by looking for them one by one and then deleting them one by one, which
is not optimal since each deletion involves shifting all the other items
in the leaf and when the leaf reaches some low threshold, to move items
off the leaf into its left and right neighbor leafs. Also, after each
item deletion we release our search path and start a new search for other
checksums items.
So optimize this by deleting in bulk all the items in the same leaf that
contain checksums for the extent being freed.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
When both the parent and send snapshots have a directory inode with the
same number but different generations (therefore they are different
inodes) and both have an entry with the same name, an incremental send
stream will contain an invalid rmdir operation that refers to the
orphanized name of the inode from the parent snapshot.
The following example scenario shows how this happens.
Parent snapshot:
.
|---- d259_old/ (ino 259, gen 9)
| |---- d1/ (ino 258, gen 9)
|
|---- f (ino 257, gen 9)
Send snapshot:
.
|---- d258/ (ino 258, gen 7)
|---- d259/ (ino 259, gen 7)
|---- d1/ (ino 257, gen 7)
When the kernel is processing inode 258 it notices that in both snapshots
there is an inode numbered 259 that is a parent of an inode 258. However
it ignores the fact that the inodes numbered 259 have different generations
in both snapshots, which means they are effectively different inodes.
Then it checks that both inodes 259 have a dentry named "d1" and because
of that it issues a rmdir operation with orphanized name of the inode 258
from the parent snapshot. This happens at send.c:process_record_refs(),
which calls send.c:did_overwrite_first_ref() that returns true and because
of that later on at process_recorded_refs() such rmdir operation is issued
because the inode being currently processed (258) is a directory and it
was deleted in the send snapshot (and replaced with another inode that has
the same number and is a directory too).
Fix this issue by comparing the generations of parent directory inodes
that have the same number and make send.c:did_overwrite_first_ref() when
the generations are different.
The following steps reproduce the problem.
$ mkfs.btrfs -f /dev/sdb
$ mount /dev/sdb /mnt
$ touch /mnt/f
$ mkdir /mnt/d1
$ mkdir /mnt/d259_old
$ mv /mnt/d1 /mnt/d259_old/d1
$ btrfs subvolume snapshot -r /mnt /mnt/snap1
$ btrfs send /mnt/snap1 -f /tmp/1.snap
$ umount /mnt
$ mkfs.btrfs -f /dev/sdc
$ mount /dev/sdc /mnt
$ mkdir /mnt/d1
$ mkdir /mnt/dir258
$ mkdir /mnt/dir259
$ mv /mnt/d1 /mnt/dir259/d1
$ btrfs subvolume snapshot -r /mnt /mnt/snap2
$ btrfs receive /mnt/ -f /tmp/1.snap
# Take note that once the filesystem is created, its current
# generation has value 7 so the inodes from the second snapshot all have
# a generation value of 7. And after receiving the first snapshot
# the filesystem is at a generation value of 10, because the call to
# create the second snapshot bumps the generation to 8 (the snapshot
# creation ioctl does a transaction commit), the receive command calls
# the snapshot creation ioctl to create the first snapshot, which bumps
# the filesystem's generation to 9, and finally when the receive
# operation finishes it calls an ioctl to transition the first snapshot
# (snap1) from RW mode to RO mode, which does another transaction commit
# and bumps the filesystem's generation to 10. This means all the inodes
# in the first snapshot (snap1) have a generation value of 9.
$ rm -f /tmp/1.snap
$ btrfs send /mnt/snap1 -f /tmp/1.snap
$ btrfs send -p /mnt/snap1 /mnt/snap2 -f /tmp/2.snap
$ umount /mnt
$ mkfs.btrfs -f /dev/sdd
$ mount /dev/sdd /mnt
$ btrfs receive /mnt -f /tmp/1.snap
$ btrfs receive -vv /mnt -f /tmp/2.snap
receiving snapshot mysnap2 uuid=9c03962f-f620-0047-9f98-32e5a87116d9, ctransid=7 parent_uuid=d17a6e3f-14e5-df4f-be39-a7951a5399aa, parent_ctransid=9
utimes
unlink f
mkdir o257-7-0
mkdir o259-7-0
rename o257-7-0 -> o259-7-0/d1
chown o259-7-0/d1 - uid=0, gid=0
chmod o259-7-0/d1 - mode=0755
utimes o259-7-0/d1
rmdir o258-9-0
ERROR: rmdir o258-9-0 failed: No such file or directory
Signed-off-by: Robbie Ko <robbieko@synology.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
[Rewrote changelog to be more precise and clear]
Signed-off-by: Filipe Manana <fdmanana@suse.com>
When we are checking if we need to delay the rename operation for an
inode we not checking if a parent inode that exists in the send and
parent snapshots is really the same inode or not, that is, we are not
comparing the generation number of the parent inode in the send and
parent snapshots. Not only this results in unnecessarily delaying a
rename operation but also can later on make us generate an incorrect
name for a new inode in the send snapshot that has the same number
as another inode in the parent snapshot but a different generation.
Here follows an example where this happens.
Parent snapshot:
. (ino 256, gen 3)
|--- dir258/ (ino 258, gen 7)
| |--- dir257/ (ino 257, gen 7)
|
|--- dir259/ (ino 259, gen 7)
Send snapshot:
. (ino 256, gen 3)
|--- file258 (ino 258, gen 10)
|
|--- new_dir259/ (ino 259, gen 10)
|--- dir257/ (ino 257, gen 7)
The following steps happen when computing the incremental send stream:
1) When processing inode 257, its new parent is created using its orphan
name (o257-21-0), and the rename operation for inode 257 is delayed
because its new parent (inode 259) was not yet processed - this
decision to delay the rename operation does not make much sense
because the inode 259 in the send snapshot is a new inode, it's not
the same as inode 259 in the parent snapshot.
2) When processing inode 258 we end up delaying its rmdir operation,
because inode 257 was not yet renamed (moved away from the directory
inode 258 represents). We also create the new inode 258 using its
orphan name "o258-10-0", then rename it to its final name of "file258"
and then issue a truncate operation for it. However this truncate
operation contains an incorrect name, which corresponds to the orphan
name and not to the final name, which makes the receiver fail. This
happens because when we attempt to compute the inode's current name
we verify that there's another inode with the same number (258) that
has its rmdir operation pending and because of that we generate an
orphan name for the new inode 258 (we do this in the function
get_cur_path()).
Fix this by not delayed the rename operation of an inode if it has parents
with the same number but different generations in both snapshots.
The following steps reproduce this example scenario.
$ mkfs.btrfs -f /dev/sdb
$ mount /dev/sdb /mnt
$ mkdir /mnt/dir257
$ mkdir /mnt/dir258
$ mkdir /mnt/dir259
$ mv /mnt/dir257 /mnt/dir258/dir257
$ btrfs subvolume snapshot -r /mnt /mnt/snap1
$ mv /mnt/dir258/dir257 /mnt/dir257
$ rmdir /mnt/dir258
$ rmdir /mnt/dir259
# Remount the filesystem so that the next created inodes will have the
# numbers 258 and 259. This is because when a filesystem is mounted,
# btrfs sets the subvolume's inode counter to a value corresponding to
# the highest inode number in the subvolume plus 1. This inode counter
# is used to assign a unique number to each new inode and it's
# incremented by 1 after very inode creation.
# Note: we unmount and then mount instead of doing a mount with
# "-o remount" because otherwise the inode counter remains at value 260.
$ umount /mnt
$ mount /dev/sdb /mnt
$ touch /mnt/file258
$ mkdir /mnt/new_dir259
$ mv /mnt/dir257 /mnt/new_dir259/dir257
$ btrfs subvolume snapshot -r /mnt /mnt/snap2
$ btrfs send /mnt/snap1 -f /tmp/1.snap
$ btrfs send -p /mnt/snap1 /mnt/snap2 -f /tmp/2.snap
$ umount /mnt
$ mkfs.btrfs -f /dev/sdc
$ mount /dev/sdc /mnt
$ btrfs receive /mnt -f /tmo/1.snap
$ btrfs receive /mnt -f /tmo/2.snap -vv
receiving snapshot mysnap2 uuid=e059b6d1-7f55-f140-8d7c-9a3039d23c97, ctransid=10 parent_uuid=77e98cb6-8762-814f-9e05-e8ba877fc0b0, parent_ctransid=7
utimes
mkdir o259-10-0
rename dir258 -> o258-7-0
utimes
mkfile o258-10-0
rename o258-10-0 -> file258
utimes
truncate o258-10-0 size=0
ERROR: truncate o258-10-0 failed: No such file or directory
Reported-by: Robbie Ko <robbieko@synology.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Under certain situations, an incremental send operation can fail due to a
premature attempt to create a new top level inode (a direct child of the
subvolume/snapshot root) whose name collides with another inode that was
removed from the send snapshot.
Consider the following example scenario.
Parent snapshot:
. (ino 256, gen 8)
|---- a1/ (ino 257, gen 9)
|---- a2/ (ino 258, gen 9)
Send snapshot:
. (ino 256, gen 3)
|---- a2/ (ino 257, gen 7)
In this scenario, when receiving the incremental send stream, the btrfs
receive command fails like this (ran in verbose mode, -vv argument):
rmdir a1
mkfile o257-7-0
rename o257-7-0 -> a2
ERROR: rename o257-7-0 -> a2 failed: Is a directory
What happens when computing the incremental send stream is:
1) An operation to remove the directory with inode number 257 and
generation 9 is issued.
2) An operation to create the inode with number 257 and generation 7 is
issued. This creates the inode with an orphanized name of "o257-7-0".
3) An operation rename the new inode 257 to its final name, "a2", is
issued. This is incorrect because inode 258, which has the same name
and it's a child of the same parent (root inode 256), was not yet
processed and therefore no rmdir operation for it was yet issued.
The rename operation is issued because we fail to detect that the
name of the new inode 257 collides with inode 258, because their
parent, a subvolume/snapshot root (inode 256) has a different
generation in both snapshots.
So fix this by ignoring the generation value of a parent directory that
matches a root inode (number 256) when we are checking if the name of the
inode currently being processed collides with the name of some other
inode that was not yet processed.
We can achieve this scenario of different inodes with the same number but
different generation values either by mounting a filesystem with the inode
cache option (-o inode_cache) or by creating and sending snapshots across
different filesystems, like in the following example:
$ mkfs.btrfs -f /dev/sdb
$ mount /dev/sdb /mnt
$ mkdir /mnt/a1
$ mkdir /mnt/a2
$ btrfs subvolume snapshot -r /mnt /mnt/snap1
$ btrfs send /mnt/snap1 -f /tmp/1.snap
$ umount /mnt
$ mkfs.btrfs -f /dev/sdc
$ mount /dev/sdc /mnt
$ touch /mnt/a2
$ btrfs subvolume snapshot -r /mnt /mnt/snap2
$ btrfs receive /mnt -f /tmp/1.snap
# Take note that once the filesystem is created, its current
# generation has value 7 so the inode from the second snapshot has
# a generation value of 7. And after receiving the first snapshot
# the filesystem is at a generation value of 10, because the call to
# create the second snapshot bumps the generation to 8 (the snapshot
# creation ioctl does a transaction commit), the receive command calls
# the snapshot creation ioctl to create the first snapshot, which bumps
# the filesystem's generation to 9, and finally when the receive
# operation finishes it calls an ioctl to transition the first snapshot
# (snap1) from RW mode to RO mode, which does another transaction commit
# and bumps the filesystem's generation to 10.
$ rm -f /tmp/1.snap
$ btrfs send /mnt/snap1 -f /tmp/1.snap
$ btrfs send -p /mnt/snap1 /mnt/snap2 -f /tmp/2.snap
$ umount /mnt
$ mkfs.btrfs -f /dev/sdd
$ mount /dev/sdd /mnt
$ btrfs receive /mnt /tmp/1.snap
# Receive of snapshot snap2 used to fail.
$ btrfs receive /mnt /tmp/2.snap
Signed-off-by: Robbie Ko <robbieko@synology.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
[Rewrote changelog to be more precise and clear]
Signed-off-by: Filipe Manana <fdmanana@suse.com>
'BTRFS_ORDERED_REGULAR' was introduced for the cow case in patch
'Btrfs: specify a new ordered extent type for create_io_em',
but it missed the directIO cow case.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Chris Mason <clm@fb.com>
Commit e5d6b12fe1 (Btrfs: don't WARN() in btrfs_transaction_abort() for
IO errors) added a pr_debug call to be printed when a transaction is
aborted with -EIO instead of WARN. btrfs_debug prints which file system
the message is associated with so let's use that instead.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_truncate_free_space_cache always allocates a btrfs_path structure
but only uses it when the caller passes a block group. Let's move the
allocation and free into the conditional.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The free space cache APIs accept a root but always use the tree root.
Also, btrfs_truncate_free_space_cache accepts a root AND an inode but
the inode always points to the root anyway, so let's just pass the inode.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_inc_block_group_ro is either passed the extent root or the dev
root, but it doesn't do anything with the dev tree. Let's convert
to passing an fs_info and using the extent root.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We don't need to pass a root to flush_space since it always uses
the fs_root.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Outside of interactions with qgroups, the roots passed in extent-tree.c
are usually passed to ensure that we don't do refcounts on log trees or
to get the allocation profile for an allocation request. Otherwise, it
operates on the extent root. This patch converts some more routines in
extent-tree.c that are always called with the extent root to accept
an fs_info instead.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Just as Filipe pointed out, the most time consuming parts of qgroup are
btrfs_qgroup_account_extents() and
btrfs_qgroup_prepare_account_extents().
Which both call btrfs_find_all_roots() to get old_roots and new_roots
ulist.
What makes things worse is, we're calling that expensive
btrfs_find_all_roots() at transaction committing time with
TRANS_STATE_COMMIT_DOING, which will blocks all incoming transaction.
Such behavior is necessary for @new_roots search as current
btrfs_find_all_roots() can't do it correctly so we do call it just
before switch commit roots.
However for @old_roots search, it's not necessary as such search is
based on commit_root, so it will always be correct and we can move it
out of transaction committing.
This patch moves the @old_roots search part out of
commit_transaction(), so in theory we can half the time qgroup time
consumption at commit_transaction().
But please note that, this won't speedup qgroup overall, the total time
consumption is still the same, just reduce the performance stall.
Cc: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Both unused after the call to update_cache_item has been moved to
__btrfs_wait_cache_io.
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Unused since the helper has been split, eb used in the caller.
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
After the page locking has been reworked, we get all pages prepared via
cmp_pages.
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The name parameters have never been used, as the name is passed via the
dentry.
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The 'device' used to be added in that function, but now it's done by the
caller.
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Never used for anything meaningful since we have our own superblock
filler.
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The 'tree' was used to call locking hook that does not exist anymore.
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The logic has been updated in "Btrfs: make mapping->writeback_index
point to the last written page" (a91326679f) and page is not
needed anymore.
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This used to hold number of maximum pages to allocate, but this is now
limited by BIO_MAX_PAGES. The local are now unused and removed as well.
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
None of the checks need to know the ro/rw status as they're all not
changing the superblock. Moreover, we can access the sb flags directly
if we'd need to decide by the ro/rw status.
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Unused since qgroup refactoring that split data and metadata accounting,
the btrfs_qgroup_free helper.
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
write_all_supers and write_ctree_super are almost equal, the parameter
'trans' is unused so we can drop it and have just one helper.
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Change the name so it matches the naming we already use eg. for
btrfs_path.
Suggested-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There was never need for RCU protection around reading nodesize or other
fairly constant filesystem data.
Signed-off-by: David Sterba <dsterba@suse.com>
The quota status used to be tracked as a variable, so the mutex was
needed (until "Btrfs: add a flags field to btrfs_fs_info" afcdd129e0).
Since the status is a bit modified atomically and we don't hold the
mutex beyond the check, we can drop it.
Signed-off-by: David Sterba <dsterba@suse.com>
Status of quotas should be the first check in
btrfs_qgroup_account_extent and we can return immediatelly, no need to
do no-op ulist frees.
Signed-off-by: David Sterba <dsterba@suse.com>
We can embed range_changed to the extent changeset to address following
problems:
- no need to allocate ulist dynamically, we also get rid of the GFP_NOFS
for free
- fix lack of allocation failure checking in btrfs_qgroup_reserve_data
The stack consuption where extent_changeset is used slightly increases:
before: 16
after: 16 - 8 (for pointer) + 32 (sizeof ulist) = 40
Which is bearable.
Reviewed-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We do a readahead of the free space cache inode to speed things up but
the failure is not fatal, like in other readahead cases. Proper reads
would need to happen anyway and any errors would be caught there.
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Qgroup relations are added/deleted from ioctl, we hold the high level
qgroup lock, no deadlocks or recursion from the allocation possible
here.
Signed-off-by: David Sterba <dsterba@suse.com>
We don't need to use GFP_NOFS here as this is called from ioctls an the
only lock held is the subvol_sem, which is of a high level and protects
creation/renames/deletion and is never held in the writeout paths.
Signed-off-by: David Sterba <dsterba@suse.com>
We don't need to use GFP_NOFS here as this is called from ioctls an the
only lock held is the subvol_sem, which is of a high level and protects
creation/renames/deletion and is never held in the writeout paths.
Signed-off-by: David Sterba <dsterba@suse.com>
As 0 refers to an existing type BTRFS_ORDERED_IO_DONE, this specifies a
new type 'REGULAR' for regular IO.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We have similar codes to create and insert extent mapping around IO path,
this merges them into a single helper.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This uses a helper instead of open code around used byte of space_info
everywhere.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We don't need to take the lock if the block group has not been cached.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The original csum error message only outputs inode number, offset, check
sum and expected check sum.
However no root objectid is outputted, which sometimes makes debugging
quite painful under multi-subvolume case (including relocation).
Also the checksum output is decimal, which seldom makes sense for
users/developers and is hard to read in most time.
This patch will add root objectid, which will be %lld for rootid larger
than LAST_FREE_OBJECTID, and hex csum output for better readability.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
If btrfs_bio_alloc fails in submit_extent_page, submit_extent_page returns
without clearing the writeback bit of the failed page.
__extent_writepage_io, that is a caller of submit_extent_page,
does not clear the remaining writeback bit anywhere.
As a result, this will cause the hang at filemap_fdatawait_range,
because it waits the writeback bit to be cleared from the failed page.
So, we have to call end_page_writeback to clear the writeback bit.
For reproducing the hang, we inject a fault like
if (should_failtest()) { // I define should_failtest()
bio = NULL;
}
else {
bio = btrfs_bio_alloc(...);
}
in submit_extent_page.
We should also check whether page has the bit before end_page_writeback,
to avoid the conflict against the other end_page_writeback in bio_endio.
Thus, we add PageWriteback checks not only in __extent_writepage_io,
but also in write_one_eb too, because it misses the check.
Signed-off-by: Takafumi Kubota <takafumi.kubota1012@sslab.ics.keio.ac.jp>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Cc: David Sterba <dsterba@suse.cz>
Signed-off-by: David Sterba <dsterba@suse.com>
Commit "btrfs: ulist: Add ulist_del() function" (d4b8040459)
removed some debugging code but left the structure defintions.
Reviewed-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Since we have a helper to set page bits, let lock_delalloc_pages and
__unlock_for_delalloc use it.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ changes to the helper separated from the following patch ]
Signed-off-by: David Sterba <dsterba@suse.com>
This introduces a new helper which can be used to process pages bits.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
run_delalloc_nocow has used trans in two places where they don't
actually need @trans.
For btrfs_lookup_file_extent, we search for file extents without COWing
anything, and for btrfs_cross_ref_exist, the only place where we need
@trans is deferencing it in order to get running_transaction which we
could easily get from the global fs_info.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
All we need is @delayed_refs, all callers have get it ahead of calling
btrfs_find_delayed_ref_head since lock needs to be acquired firstly,
there is no reason to deference it again inside the function.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
@trans is not used at all, this removes it.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
@cached_state is no more required in __extent_writepage_io, also remove
the goto label.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Once a qgroup limit is exceeded, it's impossible to restore normal
operation to the subvolume without modifying the limit or removing
the subvolume. This is a surprising situation for many users used
to the typical workflow with quotas on other file systems where it's
possible to remove files until the used space is back under the limit.
When we go to unlink a file and start the transaction, we'll hit
the qgroup limit while trying to reserve space for the items we'll
modify while removing the file. We discussed last month how best
to handle this situation and agreed that there is no perfect solution.
The best principle-of-least-surprise solution is to handle it similarly
to how we already handle ENOSPC when unlinking, which is to allow
the operation to succeed with the expectation that it will ultimately
release space under most circumstances.
This patch modifies the transaction start path to select whether to
honor the qgroups limits. btrfs_start_transaction_fallback_global_rsv
is the only caller that skips enforcement. The reservation and tracking
still happens normally -- it just skips the enforcement step.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Reviewed-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Commit Btrfs: btrfs_page_mkwrite: Reserve space in sectorsized units"
(d0b7da88) did this, but btrfs_lookup_ordered_range expects a 'length'
rather than a 'page_end'.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Variable 'walk' in lock_stripe_add() is not used. Remove it.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This was originally a prep patch for changing the behavior on len=0, but
we went another direction with that. This still makes the function
slightly easier to follow.
Reviewed-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In a lot of places, it's unclear when it's safe to reuse a struct
btrfs_key after it has been passed to a helper function. Constify these
arguments wherever possible to make it obvious.
Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Dio writes can update i_size in btrfs_get_blocks_direct when it
writes to offset beyond EOF so that endio can update disk_i_size
correctly (because we don't udpate disk_i_size beyond i_size).
However, when truncating down a file, we firstly update i_size
and then wait for in-flight lockless dio reads/writes, according
to the above, i_size may have been changed in dio writes, and
file extents don't get truncated.
For lockless dio writes are always overwrites, i_size is not
supposed to be changed, so this adds a check to filter out this
case.
The race could be reproduced by fstests/generic/299 with patch
"Btrfs: fix btrfs_ordered_update_i_size to update disk_i_size properly"
applied.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Since we have a good helper entry_end, use it for ordered extent.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ whitespace reformatting ]
Signed-off-by: David Sterba <dsterba@suse.com>
The comment about "page_mkwrite gets called every time the page is
dirtied" in btrfs_page_mkwrite is not correct, it only gets called the
first time the page gets dirtied after the page faults in.
However, we don't need to touch the code because it works well, although
the proper logic is to check if delalloc bits has been set and if so, go
free reserved space, if not, set the delalloc bits for dirty page range.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_ordered_update_i_size can be called by truncate and endio, but
only endio takes ordered_extent which contains the completed IO.
while truncating down a file, if there are some in-flight IOs,
btrfs_ordered_update_i_size in endio will set disk_i_size to
@orig_offset that is zero. If truncating-down fails somehow, we try to
recover in memory isize with this zero'd disk_i_size.
Fix it by only updating disk_i_size with @orig_offset when
btrfs_ordered_update_i_size is not called from endio while truncating
down and waiting for in-flight IOs completing their work before recover
in-memory size.
Besides fixing the above issue, add an assertion for last_size to double
check we truncate down to the desired size.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This function is internal to btrfs and doesn't really deal with any
VFS members, as such it needn't take a struct inode refrence but
btrfs_inode.
Signed-off-by: Nikolay Borisov <n.borisov.lkml@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently btrfs_ino takes a struct inode and this causes a lot of
internal btrfs functions which consume this ino to take a VFS inode,
rather than btrfs' own struct btrfs_inode. In order to fix this "leak"
of VFS structs into the internals of btrfs first it's necessary to
eliminate all uses of struct inode for the purpose of inode. This patch
does that by using BTRFS_I to convert an inode to btrfs_inode. With
this problem eliminated subsequent patches will start eliminating the
passing of struct inode altogether, eventually resulting in a lot cleaner
code.
Signed-off-by: Nikolay Borisov <n.borisov.lkml@gmail.com>
[ fix btrfs_get_extent tracepoint prototype ]
Signed-off-by: David Sterba <dsterba@suse.com>
The expression is open-coded in several places, this asks for a wrapper.
As we know the MAX_EXTENT fits to u32, we can use the appropirate
division helper. This cascades to the result type updates.
Compiler is clever enough to use shift instead of integer division, so
there's no change in the generated assembly.
Signed-off-by: David Sterba <dsterba@suse.com>
A proposed patch in https://marc.info/?l=linux-btrfs&m=147859791003837
pointed out bad limit threshold in cow_file_range_async, but it turned
out that the whole logic is not necessary and is done by writeback. We
agreed to remove it.
Signed-off-by: David Sterba <dsterba@suse.com>
As of now writes smaller than 64k for non compressed extents and 16k
for compressed extents inside eof are considered as candidate
for auto defrag, put them together at a place.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Since btrfs_defrag_leaves() does not support extent_root, remove its
corresponding call. The user can use the file based defrag to defrag
extents as of now.
No change in behaviour as extent_root is explicitly skipped in
btrfs_defrag_leaves and this has never worked as expected.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ ehnance changelong ]
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_add_delayed_data_ref is always called with a NULL extent_op,
so let's drop the argument.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The check for a null inode is redundant since the function
is a callback for exportfs, which will itself crash if
dentry->d_inode or parent->d_inode is NULL. Removing the
null check makes this consistent with other file systems.
Also remove the redundant null dir check too.
Found with static analysis by CoverityScan, CID 1389472
Kudos to Jeff Mahoney for reviewing and explaining the error in
my original patch (most of this explanation went into the above
commit message) and David Sterba for pointing out that the dir
check is also redundant.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This replaces ACCESS_ONCE macro with the corresponding
READ|WRITE macros
Signed-off-by: Seraphime Kirkovski <kirkseraph@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This cleans up the cases where the min/max macros were used with a cast
rather than using directly min_t/max_t.
Signed-off-by: Seraphime Kirkovski <kirkseraph@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
To make the code clearer, use rb_entry() instead of container_of() to
deal with rbtree.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
try_release_extent_state reduces the gfp mask to GFP_NOFS if it is
compatible. This is true for GFP_KERNEL as well. There is no real
reason to do that though. There is no new lock taken down the
the only consumer of the gfp mask which is
try_release_extent_state
clear_extent_bit
__clear_extent_bit
alloc_extent_state
So this seems just unnecessary and confusing.
Signed-off-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
b335b0034e ("Btrfs: Avoid using __GFP_HIGHMEM with slab allocator")
has reduced the allocation mask in btrfs_releasepage to GFP_NOFS just
to prevent from giving an unappropriate gfp mask to the slab allocator
deeper down the callchain (in alloc_extent_state). This is wrong for
two reasons a) GFP_NOFS might be just too restrictive for the calling
context b) it is better to tweak the gfp mask down when it needs that.
So just remove the mask tweaking from btrfs_releasepage and move it
down to alloc_extent_state where it is needed.
Signed-off-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Goldwyn Rodrigues has exposed and fixed a bug which underflows btrfs
qgroup reserved space, and leads to non-writable fs.
This reminds us that we don't have enough underflow check for qgroup
reserved space.
For underflow case, we should not really underflow the numbers but warn
and keeps qgroup still work.
So add more check on qgroup reserved space and add WARN_ON() and
btrfs_warn() for any underflow case.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Reviewed-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Pull btrfs fixes from Chris Mason:
"This has two last minute fixes. The highest priority here is a
regression fix for the decompression code, but we also fixed up a
problem with the 32-bit compat ioctls.
The decompression bug could hand back the wrong data on big reads when
zlib was used. I have a larger cleanup to make the math here less
error prone, but at this stage in the release Omar's patch is the best
choice"
* 'for-linus-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
btrfs: fix btrfs_decompress_buf2page()
btrfs: fix btrfs_compat_ioctl failures on non-compat ioctls
If btrfs_decompress_buf2page() is handed a bio with its page in the
middle of the working buffer, then we adjust the offset into the working
buffer. After we copy into the bio, we advance the iterator by the
number of bytes we copied. Then, we have some logic to handle the case
of discontiguous pages and adjust the offset into the working buffer
again. However, if we didn't advance the bio to a new page, we may enter
this case in error, essentially repeating the adjustment that we already
made when we entered the function. The end result is bogus data in the
bio.
Previously, we only checked for this case when we advanced to a new
page, but the conversion to bio iterators changed that. This restores
the old, correct behavior.
A case I saw when testing with zlib was:
buf_start = 42769
total_out = 46865
working_bytes = total_out - buf_start = 4096
start_byte = 45056
The condition (total_out > start_byte && buf_start < start_byte) is
true, so we adjust the offset:
buf_offset = start_byte - buf_start = 2287
working_bytes -= buf_offset = 1809
current_buf_start = buf_start = 42769
Then, we copy
bytes = min(bvec.bv_len, PAGE_SIZE - buf_offset, working_bytes) = 1809
buf_offset += bytes = 4096
working_bytes -= bytes = 0
current_buf_start += bytes = 44578
After bio_advance(), we are still in the same page, so start_byte is the
same. Then, we check (total_out > start_byte && current_buf_start < start_byte),
which is true! So, we adjust the values again:
buf_offset = start_byte - buf_start = 2287
working_bytes = total_out - start_byte = 1809
current_buf_start = buf_start + buf_offset = 45056
But note that working_bytes was already zero before this, so we should
have stopped copying.
Fixes: 974b1adc3b ("btrfs: use bio iterators for the decompression handlers")
Reported-by: Pat Erley <pat-lkml@erley.org>
Reviewed-by: Chris Mason <clm@fb.com>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Tested-by: Liu Bo <bo.li.liu@oracle.com>
Commit 4c63c2454e incorrectly assumed that returning -ENOIOCTLCMD would
cause the native ioctl to be called. The ->compat_ioctl callback is
expected to handle all ioctls, not just compat variants. As a result,
when using 32-bit userspace on 64-bit kernels, everything except those
three ioctls would return -ENOTTY.
Fixes: 4c63c2454e ("btrfs: bugfix: handle FS_IOC32_{GETFLAGS,SETFLAGS,GETVERSION} in btrfs_ioctl")
Cc: stable@vger.kernel.org
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
blk_get_backing_dev_info() is now a simple dereference. Remove that
function and simplify some code around that.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@fb.com>
Pull btrfs updates from Chris Mason:
"Some fixes that we've collected from the list.
We still have one more pending to nail down a regression in lzo
compression, but I wanted to get this batch out the door"
* 'for-linus-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
Btrfs: remove ->{get, set}_acl() from btrfs_dir_ro_inode_operations
Btrfs: disable xattr operations on subvolume directories
Btrfs: remove old tree_root case in btrfs_read_locked_inode()
Btrfs: fix truncate down when no_holes feature is enabled
Btrfs: Fix deadlock between direct IO and fast fsync
btrfs: fix false enospc error when truncating heavily reflinked file
When you snapshot a subvolume containing a subvolume, you get a
placeholder directory where the subvolume would be. These directory
inodes have ->i_ops set to btrfs_dir_ro_inode_operations. Previously,
these i_ops didn't include the xattr operation callbacks. The conversion
to xattr_handlers missed this case, leading to bogus attempts to set
xattrs on these inodes. This manifested itself as failures when running
delayed inodes.
To fix this, clear IOP_XATTR in ->i_opflags on these inodes.
Fixes: 6c6ef9f26e ("xattr: Stop calling {get,set,remove}xattr inode operations")
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Reported-by: Chris Murphy <lists@colorremedies.com>
Tested-by: Chris Murphy <lists@colorremedies.com>
Cc: <stable@vger.kernel.org> # 4.9.x
Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
As Jeff explained in c2951f32d3 ("btrfs: remove old tree_root dirent
processing in btrfs_real_readdir()"), supporting this old format is no
longer necessary since the Btrfs magic number has been updated since we
changed to the current format. There are other places where we still
handle this old format, but since this is part of a fix that is going to
stable, I'm only removing this one for now.
Cc: <stable@vger.kernel.org> # 4.9.x
Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
For such a file mapping,
[0-4k][hole][8k-12k]
In NO_HOLES mode, we don't have the [hole] extent any more.
Commit c1aa45759e ("Btrfs: fix shrinking truncate when the no_holes feature is enabled")
fixed disk isize not being updated in NO_HOLES mode when data is not flushed.
However, even if data has been flushed, we can still have trouble
in updating disk isize since we updated disk isize to 'start' of
the last evicted extent.
Reviewed-by: Chris Mason <clm@fb.com>
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The following deadlock is seen when executing generic/113 test,
---------------------------------------------------------+----------------------------------------------------
Direct I/O task Fast fsync task
---------------------------------------------------------+----------------------------------------------------
btrfs_direct_IO
__blockdev_direct_IO
do_blockdev_direct_IO
do_direct_IO
btrfs_get_blocks_direct
while (blocks needs to written)
get_more_blocks (first iteration)
btrfs_get_blocks_direct
btrfs_create_dio_extent
down_read(&BTRFS_I(inode) >dio_sem)
Create and add extent map and ordered extent
up_read(&BTRFS_I(inode) >dio_sem)
btrfs_sync_file
btrfs_log_dentry_safe
btrfs_log_inode_parent
btrfs_log_inode
btrfs_log_changed_extents
down_write(&BTRFS_I(inode) >dio_sem)
Collect new extent maps and ordered extents
wait for ordered extent completion
get_more_blocks (second iteration)
btrfs_get_blocks_direct
btrfs_create_dio_extent
down_read(&BTRFS_I(inode) >dio_sem)
--------------------------------------------------------------------------------------------------------------
In the above description, Btrfs direct I/O code path has not yet started
submitting bios for file range covered by the initial ordered
extent. Meanwhile, The fast fsync task obtains the write semaphore and
waits for I/O on the ordered extent to get completed. However, the
Direct I/O task is now blocked on obtaining the read semaphore.
To resolve the deadlock, this commit modifies the Direct I/O code path
to obtain the read semaphore before invoking
__blockdev_direct_IO(). The semaphore is then given up after
__blockdev_direct_IO() returns. This allows the Direct I/O code to
complete I/O on all the ordered extents it creates.
Signed-off-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Below test script can reveal this bug:
dd if=/dev/zero of=fs.img bs=$((1024*1024)) count=100
dev=$(losetup --show -f fs.img)
mkdir -p /mnt/mntpoint
mkfs.btrfs -f $dev
mount $dev /mnt/mntpoint
cd /mnt/mntpoint
echo "workdir is: /mnt/mntpoint"
blocksize=$((128 * 1024))
dd if=/dev/zero of=testfile bs=$blocksize count=1
sync
count=$((17*1024*1024*1024/blocksize))
echo "file size is:" $((count*blocksize))
for ((i = 1; i <= $count; i++)); do
dst_offset=$((blocksize * i))
xfs_io -f -c "reflink testfile 0 $dst_offset $blocksize"\
testfile > /dev/null
done
sync
truncate --size 0 testfile
The last truncate operation will fail for ENOSPC reason, but indeed
it should not fail.
In btrfs_truncate(), we use a temporary block_rsv to do truncate
operation. With every btrfs_truncate_inode_items() call, we migrate space
to this block_rsv, but forget to cleanup previous reservation, which
will make this block_rsv's reserved bytes keep growing, and this reserved
space will only be released in the end of btrfs_truncate(), this metadata
leak will impact other's metadata reservation. In this case, it's
"btrfs_start_transaction(root, 2);" fails for enospc error, which make
this truncate operation fail.
Call btrfs_block_rsv_release() to fix this bug.
Signed-off-by: Wang Xiaoguang <wangxg.fnst@cn.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Pull btrfs fixes from Chris Mason:
"These are all over the place.
The tracepoint part of the pull fixes a crash and adds a little more
information to two tracepoints, while the rest are good old fashioned
fixes"
* 'for-linus-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
btrfs: make tracepoint format strings more compact
Btrfs: add truncated_len for ordered extent tracepoints
Btrfs: add 'inode' for extent map tracepoint
btrfs: fix crash when tracepoint arguments are freed by wq callbacks
Btrfs: adjust outstanding_extents counter properly when dio write is split
Btrfs: fix lockdep warning about log_mutex
Btrfs: use down_read_nested to make lockdep silent
btrfs: fix locking when we put back a delayed ref that's too new
btrfs: fix error handling when run_delayed_extent_op fails
btrfs: return the actual error value from from btrfs_uuid_tree_iterate
'inode' is an important field for btrfs_get_extent, lets trace it.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Enabling btrfs tracepoints leads to instant crash, as reported. The wq
callbacks could free the memory and the tracepoints started to
dereference the members to get to fs_info.
The proposed fix https://marc.info/?l=linux-btrfs&m=148172436722606&w=2
removed the tracepoints but we could preserve them by passing only the
required data in a safe way.
Fixes: bc074524e1 ("btrfs: prefix fsid to all trace events")
CC: stable@vger.kernel.org # 4.8+
Reported-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently how btrfs dio deals with split dio write is not good
enough if dio write is split into several segments due to the
lack of contiguous space, a large dio write like 'dd bs=1G count=1'
can end up with incorrect outstanding_extents counter and endio
would complain loudly with an assertion.
This fixes the problem by compensating the outstanding_extents
counter in inode if a large dio write gets split.
Reported-by: Anand Jain <anand.jain@oracle.com>
Tested-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
While checking INODE_REF/INODE_EXTREF for a corner case, we may acquire a
different inode's log_mutex with holding the current inode's log_mutex, and
lockdep has complained this with a possilble deadlock warning.
Fix this by using mutex_lock_nested() when processing the other inode's
log_mutex.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
If @block_group is not @used_bg, it'll try to get @used_bg's lock without
droping @block_group 's lock and lockdep has throwed a scary deadlock warning
about it.
Fix it by using down_read_nested.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In __btrfs_run_delayed_refs, when we put back a delayed ref that's too
new, we have already dropped the lock on locked_ref when we set
->processing = 0.
This patch keeps the lock to cover that assignment.
Fixes: d7df2c796d (Btrfs: attach delayed ref updates to delayed ref heads)
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In __btrfs_run_delayed_refs, the error path when run_delayed_extent_op
fails sets locked_ref->processing = 0 but doesn't re-increment
delayed_refs->num_heads_ready. As a result, we end up triggering
the WARN_ON in btrfs_select_ref_head.
Fixes: d7df2c796d (Btrfs: attach delayed ref updates to delayed ref heads)
Reported-by: Jon Nelson <jnelson-suse@jamponi.net>
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In function btrfs_uuid_tree_iterate(), errno is assigned to variable ret
on errors. However, it directly returns 0. It may be better to return
ret. This patch also removes the warning, because the caller already
prints a warning.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=188731
Signed-off-by: Pan Bian <bianpan2016@163.com>
Reviewed-by: Omar Sandoval <osandov@fb.com>
[ edited subject ]
Signed-off-by: David Sterba <dsterba@suse.com>
Pull partial readlink cleanups from Miklos Szeredi.
This is the uncontroversial part of the readlink cleanup patch-set that
simplifies the default readlink handling.
Miklos and Al are still discussing the rest of the series.
* git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs:
vfs: make generic_readlink() static
vfs: remove ".readlink = generic_readlink" assignments
vfs: default to generic_readlink()
vfs: replace calling i_op->readlink with vfs_readlink()
proc/self: use generic_readlink
ecryptfs: use vfs_get_link()
bad_inode: add missing i_op initializers
Pull more vfs updates from Al Viro:
"In this pile:
- autofs-namespace series
- dedupe stuff
- more struct path constification"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (40 commits)
ocfs2: implement the VFS clone_range, copy_range, and dedupe_range features
ocfs2: charge quota for reflinked blocks
ocfs2: fix bad pointer cast
ocfs2: always unlock when completing dio writes
ocfs2: don't eat io errors during _dio_end_io_write
ocfs2: budget for extent tree splits when adding refcount flag
ocfs2: prohibit refcounted swapfiles
ocfs2: add newlines to some error messages
ocfs2: convert inode refcount test to a helper
simple_write_end(): don't zero in short copy into uptodate
exofs: don't mess with simple_write_{begin,end}
9p: saner ->write_end() on failing copy into non-uptodate page
fix gfs2_stuffed_write_end() on short copies
fix ceph_write_end()
nfs_write_end(): fix handling of short copies
vfs: refactor clone/dedupe_file_range common functions
fs: try to clone files first in vfs_copy_file_range
vfs: misc struct path constification
namespace.c: constify struct path passed to a bunch of primitives
quota: constify struct path in quota_on
...
Pull btrfs updates from Chris Mason:
"Jeff Mahoney and Dave Sterba have a really nice set of cleanups in
here, and Christoph pitched in corrections/improvements to make btrfs
use proper helpers for bio walking instead of doing it by hand.
There are some key fixes as well, including some long standing bugs
that took forever to track down in btrfs_drop_extents and during
balance"
* 'for-linus-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: (77 commits)
btrfs: limit async_work allocation and worker func duration
Revert "Btrfs: adjust len of writes if following a preallocated extent"
Btrfs: don't WARN() in btrfs_transaction_abort() for IO errors
btrfs: opencode chunk locking, remove helpers
btrfs: remove root parameter from transaction commit/end routines
btrfs: split btrfs_wait_marked_extents into normal and tree log functions
btrfs: take an fs_info directly when the root is not used otherwise
btrfs: simplify btrfs_wait_cache_io prototype
btrfs: convert extent-tree tracepoints to use fs_info
btrfs: root->fs_info cleanup, access fs_info->delayed_root directly
btrfs: root->fs_info cleanup, add fs_info convenience variables
btrfs: root->fs_info cleanup, update_block_group{,flags}
btrfs: root->fs_info cleanup, lock/unlock_chunks
btrfs: root->fs_info cleanup, btrfs_calc_{trans,trunc}_metadata_size
btrfs: pull node/sector/stripe sizes out of root and into fs_info
btrfs: root->fs_info cleanup, io_ctl_init
btrfs: root->fs_info cleanup, use fs_info->dev_root everywhere
btrfs: struct reada_control.root -> reada_control.fs_info
btrfs: struct btrfsic_state->root should be an fs_info
btrfs: alloc_reserved_file_extent trace point should use extent_root
...
This fixes several interlinked problems with the iterators in the
presence of multiorder entries.
1. radix_tree_iter_next() would only advance by one slot, which would
result in the iterators returning the same entry more than once if
there were sibling entries.
2. radix_tree_next_slot() could return an internal pointer instead of
a user pointer if a tagged multiorder entry was immediately followed by
an entry of lower order.
3. radix_tree_next_slot() expanded to a lot more code than it used to
when multiorder support was compiled in. And I wasn't comfortable with
entry_to_node() being in a header file.
Fixing radix_tree_iter_next() for the presence of sibling entries
necessarily involves examining the contents of the radix tree, so we now
need to pass 'slot' to radix_tree_iter_next(), and we need to change the
calling convention so it is called *before* dropping the lock which
protects the tree. Also rename it to radix_tree_iter_resume(), as some
people thought it was necessary to call radix_tree_iter_next() each time
around the loop.
radix_tree_next_slot() becomes closer to how it looked before multiorder
support was introduced. It only checks to see if the next entry in the
chunk is a sibling entry or a pointer to a node; this should be rare
enough that handling this case out of line is not a performance impact
(and such impact is amortised by the fact that the entry we just
processed was a multiorder entry). Also, radix_tree_next_slot() used to
force a new chunk lookup for untagged entries, which is more expensive
than the out of line sibling entry skipping.
Link: http://lkml.kernel.org/r/1480369871-5271-55-git-send-email-mawilcox@linuxonhyperv.com
Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com>
Tested-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Matthew Wilcox <mawilcox@microsoft.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We drop the lock which protects the radix tree, so we must call
radix_tree_iter_next() in order to avoid a modification to the tree
invalidating the iterator state.
Link: http://lkml.kernel.org/r/1480369871-5271-54-git-send-email-mawilcox@linuxonhyperv.com
Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com>
Tested-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Matthew Wilcox <mawilcox@microsoft.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit 262c5e86fe ("printk/btrfs: handle more message headers")
triggers:
warning: `ratelimit' may be used uninitialized in this function
with gcc (4.1.2) and probably many other versions. The code actually is
correct but a bit twisted. Let's make it more straightforward and set
the default values at the beginning.
Link: http://lkml.kernel.org/r/20161213135246.GQ3506@pathway.suse.cz
Signed-off-by: Petr Mladek <pmladek@suse.com>
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: David Sterba <dsterba@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Problem statement: unprivileged user who has read-write access to more than
one btrfs subvolume may easily consume all kernel memory (eventually
triggering oom-killer).
Reproducer (./mkrmdir below essentially loops over mkdir/rmdir):
[root@kteam1 ~]# cat prep.sh
DEV=/dev/sdb
mkfs.btrfs -f $DEV
mount $DEV /mnt
for i in `seq 1 16`
do
mkdir /mnt/$i
btrfs subvolume create /mnt/SV_$i
ID=`btrfs subvolume list /mnt |grep "SV_$i$" |cut -d ' ' -f 2`
mount -t btrfs -o subvolid=$ID $DEV /mnt/$i
chmod a+rwx /mnt/$i
done
[root@kteam1 ~]# sh prep.sh
[maxim@kteam1 ~]$ for i in `seq 1 16`; do ./mkrmdir /mnt/$i 2000 2000 & done
[root@kteam1 ~]# for i in `seq 1 4`; do grep "kmalloc-128" /proc/slabinfo | grep -v dma; sleep 60; done
kmalloc-128 10144 10144 128 32 1 : tunables 0 0 0 : slabdata 317 317 0
kmalloc-128 9992352 9992352 128 32 1 : tunables 0 0 0 : slabdata 312261 312261 0
kmalloc-128 24226752 24226752 128 32 1 : tunables 0 0 0 : slabdata 757086 757086 0
kmalloc-128 42754240 42754240 128 32 1 : tunables 0 0 0 : slabdata 1336070 1336070 0
The huge numbers above come from insane number of async_work-s allocated
and queued by btrfs_wq_run_delayed_node.
The problem is caused by btrfs_wq_run_delayed_node() queuing more and more
works if the number of delayed items is above BTRFS_DELAYED_BACKGROUND. The
worker func (btrfs_async_run_delayed_root) processes at least
BTRFS_DELAYED_BATCH items (if they are present in the list). So, the machinery
works as expected while the list is almost empty. As soon as it is getting
bigger, worker func starts to process more than one item at a time, it takes
longer, and the chances to have async_works queued more than needed is getting
higher.
The problem above is worsened by another flaw of delayed-inode implementation:
if async_work was queued in a throttling branch (number of items >=
BTRFS_DELAYED_WRITEBACK), corresponding worker func won't quit until
the number of items < BTRFS_DELAYED_BACKGROUND / 2. So, it is possible that
the func occupies CPU infinitely (up to 30sec in my experiments): while the
func is trying to drain the list, the user activity may add more and more
items to the list.
The patch fixes both problems in straightforward way: refuse queuing too
many works in btrfs_wq_run_delayed_node and bail out of worker func if
at least BTRFS_DELAYED_WRITEBACK items are processed.
Changed in v2: remove support of thresh == NO_THRESHOLD.
Signed-off-by: Maxim Patlasov <mpatlasov@virtuozzo.com>
Signed-off-by: Chris Mason <clm@fb.com>
Cc: stable@vger.kernel.org # v3.15+
Pull block layer updates from Jens Axboe:
"This is the main block pull request this series. Contrary to previous
release, I've kept the core and driver changes in the same branch. We
always ended up having dependencies between the two for obvious
reasons, so makes more sense to keep them together. That said, I'll
probably try and keep more topical branches going forward, especially
for cycles that end up being as busy as this one.
The major parts of this pull request is:
- Improved support for O_DIRECT on block devices, with a small
private implementation instead of using the pig that is
fs/direct-io.c. From Christoph.
- Request completion tracking in a scalable fashion. This is utilized
by two components in this pull, the new hybrid polling and the
writeback queue throttling code.
- Improved support for polling with O_DIRECT, adding a hybrid mode
that combines pure polling with an initial sleep. From me.
- Support for automatic throttling of writeback queues on the block
side. This uses feedback from the device completion latencies to
scale the queue on the block side up or down. From me.
- Support from SMR drives in the block layer and for SD. From Hannes
and Shaun.
- Multi-connection support for nbd. From Josef.
- Cleanup of request and bio flags, so we have a clear split between
which are bio (or rq) private, and which ones are shared. From
Christoph.
- A set of patches from Bart, that improve how we handle queue
stopping and starting in blk-mq.
- Support for WRITE_ZEROES from Chaitanya.
- Lightnvm updates from Javier/Matias.
- Supoort for FC for the nvme-over-fabrics code. From James Smart.
- A bunch of fixes from a whole slew of people, too many to name
here"
* 'for-4.10/block' of git://git.kernel.dk/linux-block: (182 commits)
blk-stat: fix a few cases of missing batch flushing
blk-flush: run the queue when inserting blk-mq flush
elevator: make the rqhash helpers exported
blk-mq: abstract out blk_mq_dispatch_rq_list() helper
blk-mq: add blk_mq_start_stopped_hw_queue()
block: improve handling of the magic discard payload
blk-wbt: don't throttle discard or write zeroes
nbd: use dev_err_ratelimited in io path
nbd: reset the setup task for NBD_CLEAR_SOCK
nvme-fabrics: Add FC LLDD loopback driver to test FC-NVME
nvme-fabrics: Add target support for FC transport
nvme-fabrics: Add host support for FC transport
nvme-fabrics: Add FC transport LLDD api definitions
nvme-fabrics: Add FC transport FC-NVME definitions
nvme-fabrics: Add FC transport error codes to nvme.h
Add type 0x28 NVME type code to scsi fc headers
nvme-fabrics: patch target code in prep for FC transport support
nvme-fabrics: set sqe.command_id in core not transports
parser: add u64 number parser
nvme-rdma: align to generic ib_event logging helper
...
Patches queued up by Filipe:
The most important change is still the fix for the extent tree
corruption that happens due to balance when qgroups are enabled (a
regression introduced in 4.7 by a fix for a regression from the last
qgroups rework). This has been hitting SLE and openSUSE users and QA
very badly, where transactions keep getting aborted when running
delayed references leaving the root filesystem in RO mode and nearly
unusable. There are fixes here that allow us to run xfstests again
with the integrity checker enabled, which has been impossible since 4.8
(apparently I'm the only one running xfstests with the integrity
checker enabled, which is useful to validate dirtied leafs, like
checking if there are keys out of order, etc). The rest are just some
trivial fixes, most of them tagged for stable, and two cleanups.
Signed-off-by: Chris Mason <clm@fb.com>
Commit 4bcc595ccd ("printk: reinstate KERN_CONT for printing
continuation lines") allows to define more message headers for a single
message. The motivation is that continuous lines might get mixed.
Therefore it make sense to define the right log level for every piece of
a cont line.
The current btrfs_printk() macros do not support continuous lines at the
moment. But better be prepared for a custom messages and avoid
potential "lvl" buffer overflow.
This patch iterates over the entire message header. It is interested
only into the message level like the original code.
This patch also introduces PRINTK_MAX_SINGLE_HEADER_LEN. Three bytes
are enough for the message level header at the moment. But it used to
be three, see the commit 04d2c8c83d ("printk: convert the format for
KERN_<LEVEL> to a 2 byte pattern").
Also I fixed the default ratelimit level. It looked very strange when it
was different from the default log level.
[pmladek@suse.com: Fix a check of the valid message level]
Link: http://lkml.kernel.org/r/20161111183236.GD2145@dhcp128.suse.cz
Link: http://lkml.kernel.org/r/1478695291-12169-4-git-send-email-pmladek@suse.com
Signed-off-by: Petr Mladek <pmladek@suse.com>
Acked-by: David Sterba <dsterba@suse.com>
Cc: Joe Perches <joe@perches.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: Chris Mason <clm@fb.com>
Cc: Josef Bacik <jbacik@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is exposing an existing deadlock between fsync and AIO. Until we
have the deadlock fixed, I'm pulling this one out.
This reverts commit a23eaa875f.
Signed-off-by: Chris Mason <clm@fb.com>
A clone is a perfectly fine implementation of a file copy, so most
file systems just implement the copy that way. Instead of duplicating
this logic move it to the VFS. Currently btrfs and XFS implement copies
the same way as clones and there is no behavior change for them, cifs
only implements clones and grow support for copy_file_range with this
patch. NFS implements both, so this will allow copy_file_range to work
on servers that only implement CLONE and be lot more efficient on servers
that implements CLONE and COPY.
Signed-off-by: Christoph Hellwig <hch@lst.de>
If .readlink == NULL implies generic_readlink().
Generated by:
to_del="\.readlink.*=.*generic_readlink"
for i in `git grep -l $to_del`; do sed -i "/$to_del"/d $i; done
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
btrfs_transaction_abort() has a WARN() to help us nail down whatever
problem lead to the abort. But most of the time, we're aborting for EIO,
and the warning just adds noise.
Signed-off-by: Chris Mason <clm@fb.com>
Now we only use the root parameter to print the root objectid in
a tracepoint. We can use the root parameter from the transaction
handle for that. It's also used to join the transaction with
async commits, so we remove the comment that it's just for checking.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_write_and_wait_marked_extents and btrfs_sync_log both call
btrfs_wait_marked_extents, which provides a core loop and then handles
errors differently based on whether it's it's a log root or not.
This means that btrfs_write_and_wait_marked_extents needs to take a root
because btrfs_wait_marked_extents requires one, even though it's only
used to determine whether the root is a log root. The log root code
won't ever call into the transaction commit code using a log root, so we
can factor out the core loop and provide the error handling appropriate
to each waiter in new routines. This allows us to eventually remove
the root argument from btrfs_commit_transaction, and as a result,
btrfs_end_transaction.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There are loads of functions in btrfs that accept a root parameter
but only use it to obtain an fs_info pointer. Let's convert those to
just accept an fs_info pointer directly.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
With the exception of the one case where btrfs_wait_cache_io is called
without a block group, it's called with the same arguments. The root
argument is only used in the special case, so let's factor out the core
and simplify the call in the normal case to require a trans, block group,
and path.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The extent-tree tracepoints all operate on the extent root, regardless of
which root is passed in. Let's just use the extent root objectid instead.
If it turns out that nobody is depending on the format of this tracepoint,
we can drop the root printing entirely.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This results in btrfs_assert_delayed_root_empty and
btrfs_destroy_delayed_inode taking an fs_info instead of a root.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In routines where someptr->fs_info is referenced multiple times, we
introduce a convenience variable. This makes the code considerably
more readable.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We track the node sizes per-root, but they never vary from the values
in the superblock. This patch messes with the 80-column style a bit,
but subsequent patches to factor out root->fs_info into a convenience
variable fix it up again.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The io_ctl->root member was only being used to access root->fs_info.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The root is never used. We substitute extent_root in for the
reada_find_extent call, since it's only ever used to obtain the node
size. This call site will be changed to use fs_info in a later patch.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The root member is never used except for obtaining an fs_info pointer.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Even though a separate root is passed in, we're still operating on the
extent root. Let's use that for the trace point.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_init_new_device only uses the root passed in via the ioctl to
start the transaction. Nothing else that happens is related to whatever
root the user used to initiate the ioctl. We can drop the root requirement
and just use fs_info->dev_root instead.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There are many functions that are always called with the same root
argument. Rather than passing the same root every time, we can
pass an fs_info pointer instead and have the function get the root
pointer itself.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There are 11 functions that accept a root parameter and immediately
overwrite it. We can pass those an fs_info pointer instead.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
If a log tree has a layout like the following:
leaf N:
...
item 240 key (282 DIR_LOG_ITEM 0) itemoff 8189 itemsize 8
dir log end 1275809046
leaf N + 1:
item 0 key (282 DIR_LOG_ITEM 3936149215) itemoff 16275 itemsize 8
dir log end 18446744073709551615
...
When we pass the value 1275809046 + 1 as the parameter start_ret to the
function tree-log.c:find_dir_range() (done by replay_dir_deletes()), we
end up with path->slots[0] having the value 239 (points to the last item
of leaf N, item 240). Because the dir log item in that position has an
offset value smaller than *start_ret (1275809046 + 1) we need to move on
to the next leaf, however the logic for that is wrong since it compares
the current slot to the number of items in the leaf, which is smaller
and therefore we don't lookup for the next leaf but instead we set the
slot to point to an item that does not exist, at slot 240, and we later
operate on that slot which has unexpected content or in the worst case
can result in an invalid memory access (accessing beyond the last page
of leaf N's extent buffer).
So fix the logic that checks when we need to lookup at the next leaf
by first incrementing the slot and only after to check if that slot
is beyond the last item of the current leaf.
Signed-off-by: Robbie Ko <robbieko@synology.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Fixes: e02119d5a7 (Btrfs: Add a write ahead tree log to optimize synchronous operations)
Cc: stable@vger.kernel.org # 2.6.29+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
[Modified changelog for clarity and correctness]
The hole punching can result in adding new leafs (and as a consequence
new nodes) to the tree because when we find file extent items that span
beyond the hole range we may end up not deleting them (just adjusting
them, reducing their range by reducing their length or increasing their
offset field) and add new file extent items representing holes.
So after splitting a leaf (therefore creating a new one) to insert a new
file extent item representing a hole, a new node might be added to each
level of the tree in the worst case scenario (since there's a new key
and every parent node was full).
For example if a file has an extent item representing the range 0 to 64Mb
and we punch a hole in the range 1Mb to 20Mb, the existing extent item is
duplicated and one of the copies is adjusted to represent the range 0 to
1Mb, the other copy adjusted to represent the range 20Mb to 64Mb, and a
new file extent item representing a hole in the range 1Mb to 20Mb is
inserted.
Fix this by using btrfs_calc_trans_metadata_size() instead of
btrfs_calc_trunc_metadata_size(), so that enough metadata space is
reserved for the worst possible case.
Signed-off-by: Robbie Ko <robbieko@synology.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
[Modified changelog for clarity and correctness]
This issue was found when I tried to delete a heavily reflinked file,
when deleting such files, other transaction operation will not have a
chance to make progress, for example, start_transaction() will blocked
in wait_current_trans(root) for long time, sometimes it even triggers
soft lockups, and the time taken to delete such heavily reflinked file
is also very large, often hundreds of seconds. Using perf top, it reports
that:
PerfTop: 7416 irqs/sec kernel:99.8% exact: 0.0% [4000Hz cpu-clock], (all, 4 CPUs)
---------------------------------------------------------------------------------------
84.37% [btrfs] [k] __btrfs_run_delayed_refs.constprop.80
11.02% [kernel] [k] delay_tsc
0.79% [kernel] [k] _raw_spin_unlock_irq
0.78% [kernel] [k] _raw_spin_unlock_irqrestore
0.45% [kernel] [k] do_raw_spin_lock
0.18% [kernel] [k] __slab_alloc
It seems __btrfs_run_delayed_refs() took most cpu time, after some debug
work, I found it's select_delayed_ref() causing this issue, for a delayed
head, in our case, it'll be full of BTRFS_DROP_DELAYED_REF nodes, but
select_delayed_ref() will firstly try to iterate node list to find
BTRFS_ADD_DELAYED_REF nodes, obviously it's a disaster in this case, and
waste much time.
To fix this issue, we introduce a new ref_add_list in struct btrfs_delayed_ref_head,
then in select_delayed_ref(), if this list is not empty, we can directly use
nodes in this list. With this patch, it just took about 10~15 seconds to
delte the same file. Now using perf top, it reports that:
PerfTop: 2734 irqs/sec kernel:99.5% exact: 0.0% [4000Hz cpu-clock], (all, 4 CPUs)
----------------------------------------------------------------------------------------
20.74% [kernel] [k] _raw_spin_unlock_irqrestore
16.33% [kernel] [k] __slab_alloc
5.41% [kernel] [k] lock_acquired
4.42% [kernel] [k] lock_acquire
4.05% [kernel] [k] lock_release
3.37% [kernel] [k] _raw_spin_unlock_irq
For normal files, this patch also gives help, at least we do not need to
iterate whole list to found BTRFS_ADD_DELAYED_REF nodes.
Signed-off-by: Wang Xiaoguang <wangxg.fnst@cn.fujitsu.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Commit 62b99540a1 (btrfs: relocation: Fix leaking qgroups numbers
on data extents) only fixes the problem partly.
The previous fix is to trace all new data extents at transaction commit
time when balance finishes.
However balance is not done in a large transaction, every path
replacement can happen in its own transaction.
This makes the fix useless if transaction commits during relocation.
For example:
relocate_block_group()
|-merge_reloc_roots()
| |- merge_reloc_root()
| |- btrfs_start_transaction() <- Trans X
| |- replace_path() <- Cause leak
| |- btrfs_end_transaction_throttle() <- Trans X commits here
| | Leak not fixed
| |
| |- btrfs_start_transaction() <- Trans Y
| |- replace_path() <- Cause leak
| |- btrfs_end_transaction_throttle() <- Trans Y ends
| but not committed
|-btrfs_join_transaction() <- Still trans Y
|-qgroup_fix() <- Only fixes data leak
| in trans Y
|-btrfs_commit_transaction() <- Trans Y commits
In that case, qgroup fixup can only fix data leak in trans Y, data leak
in trans X is out of fix.
So the correct fix should happen in the same transaction of
replace_path().
This patch fixes it by tracing both subtrees of tree block swap, so it
can fix the problem and ensure all leaking and fix are in the same
transaction, so no leak again.
Reported-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Reviewed-and-Tested-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Move account_shared_subtree() to qgroup.c and rename it to
btrfs_qgroup_trace_subtree().
Do the same thing for account_leaf_items() and rename it to
btrfs_qgroup_trace_leaf_items().
Since all these functions are only for qgroup, move them to qgroup.c and
export them is more appropriate.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Reviewed-and-Tested-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Rename btrfs_qgroup_insert_dirty_extent(_nolock) to
btrfs_qgroup_trace_extent(_nolock), according to the new
reserve/trace/account naming schema.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Reviewed-and-Tested-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Add explaination how btrfs qgroups work.
Qgroup is split into 3 main phrases:
1) Reserve
To ensure qgroup doesn't exceed its limit
2) Trace
To info qgroup to trace which extent
3) Account
Calculate qgroup number change for each traced extent.
This should save quite some time for new developers.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Reviewed-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
And remove the bogus check for a NULL return value from kmap, which
can't happen. While we're at it: I don't think that kmapping up to 256
will work without deadlocks on highmem machines, a better idea would
be to use vm_map_ram to map all of them into a single virtual address
range. Incidentally that would also simplify the code a lot.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Rework the loop a little bit to use the generic bio_for_each_segment_all
helper for iterating over the bio.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Use the bvec offset and len members to prepare for multipage bvecs.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David Sterba <dsterba@suse.com>
Instead of using bi_vcnt to calculate it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Use bio_for_each_segment_all to iterate over the segments instead.
This requires a bit of reshuffling so that we only lookup up the ordered
item once inside the bio_for_each_segment_all loop.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Just use bio_for_each_segment_all to iterate over all segments.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Just use bio_for_each_segment_all to iterate over all segments.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Pass the full bio to the decompression routines and use bio iterators
to iterate over the data in the bio.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David Sterba <dsterba@suse.com>
This fixes the WARN_ON on BTRFS_I(inode)->reserved_extents in
btrfs_destroy_inode and the WARN_ON on nonzero delalloc bytes on umount
with qgroups enabled.
I was able to reproduce this by setting up a small (~500kb) quota limit
and writing a file one byte at a time until I hit the limit. The warnings
would all hit on umount.
The root cause is that we would reserve a block-sized range in both
the reservation and the quota in btrfs_check_data_free_space, but if we
encountered a problem (like e.g. EDQUOT), we would only release the single
byte in the qgroup reservation. That caused an iotree state split, which
increased the number of outstanding extents, in turn disallowing releasing
the metadata reservation.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Reviewed-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
At this point we will have dropped extent entries from the file, so if we fail
to insert the new hole entries then we are leaving the fs in a corrupt state
(albeit an easily fixed one). Abort the transaciton if this happens so we can
avoid corrupting the fs. Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In order to do hole punching we have a block reserve to hold the reservation we
need to drop the extents in our range. Since we could end up dropping a lot of
extents we set rsv->failfast so we can just loop around again and drop the
remaining of the range. Unfortunately we unconditionally fill the hole extents
in and start from the last extent we encountered, which we may or may not have
dropped. So this can result in overlapping file extent entries, which can be
tripped over in a variety of ways, either by hitting BUG_ON(!ret) in
fill_holes() after the search, or in btrfs_set_item_key_safe() in
btrfs_drop_extent() at a later time by an unrelated task. Fix this by only
setting drop_end to the last extent we did actually drop. This way our holes
are filled in properly for the range that we did drop, and the rest of the range
that remains to be dropped is actually dropped. Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
If we process the last item in the leaf and hit an I/O error while
reading the next leaf, we return -EIO without having adjusted the
position. Since we have emitted dirents, getdents() will return
the byte count to the user instead of the error. Subsequent callers
will emit the last successful dirent again, and return -EIO again,
with the same result. Callers loop forever.
Instead, if we always increment ctx->pos after emitting or skipping
the dirent, we'll be sure that we won't hit the same one again. When
we go to process the next leaf, we won't have emitted any dirents
and the -EIO will be returned to the user properly. We also don't
need to track if we've emitted a dirent already or if we've changed
the position yet.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Commit 3de4586c52 (Btrfs: Allow subvolumes and snapshots anywhere
in the directory tree) introduced the current system of placing
snapshots in the directory tree. It also introduced the behavior of
creating the snapshot and then creating the directory entries for it.
We've kept this code around for compatibility reasons, but it turns
out that no file systems with the old tree_root based snapshots can
be mounted on newer (>= 2009) kernels anyway. About a month after the
above commit, commit 2a7108ad89 (Btrfs: rev the disk format for the
inode compat and csum selection changes) landed, changing the superblock
magic number.
As a result, we know that we'll never encounter tree_root-based dirents
or have to deal with skipping our own snapshot dirents. Since that
also means that we're now only iterating over DIR_INDEX items, which only
contain one directory entry per leaf item, we don't need to loop over
the leaf item contents anymore either.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
If zlib_inflateInit2 fails, the input page is never unmapped.
Add a call to kunmap when it fails.
Signed-off-by: Nick Terrell <nickrterrell@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The balance status item contains currently known filter values, but the
stripes filter was unintentionally not among them. This would mean, that
interrupted and automatically restarted balance does not apply the
stripe filters.
Fixes: dee32d0ac3
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: David Sterba <dsterba@suse.com>
'btrfs_iget()' can not return NULL, so this test can be removed.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
csum member of struct btrfs_super_block has array type of u8. It makes
sense that function btrfs_csum_final should be also declared to accept
u8 *. I changed the declaration of method void btrfs_csum_final(u32 crc,
char *result); to void btrfs_csum_final(u32 crc, u8 *result);
Signed-off-by: Domagoj Tršan <domagoj.trsan@gmail.com>
[ changed cast to u8 at several call sites ]
Signed-off-by: David Sterba <dsterba@suse.com>
If we have
|0--hole--4095||4096--preallocate--12287|
instead of using preallocated space, a 8K direct write will just
create a new 8K extent and it'll end up with
|0--new extent--8191||8192--preallocate--12287|
It's because we find a hole em and then go to create a new 8K
extent directly without adjusting @len.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: Chris Mason <clm@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There is no need to call kfree() if memdup_user() fails, as no memory
was allocated and the error in the error-valued pointer should be returned.
Signed-off-by: Shailendra Verma <shailendra.v@samsung.com>
[ edit subject ]
Signed-off-by: David Sterba <dsterba@suse.com>
Using copy_extent_buffer is suitable for copying betwenn buffers from an
arbitrary offset and deals with page boundaries. This is not necessary
when doing a full extent_buffer-to-extent_buffer copy. We can utilize
the copy_page helper as well.
Signed-off-by: David Sterba <dsterba@suse.com>
The only memset we do is to 0, so sink the parameter to the function and
simplify all calls. Rename the function to reflect the behaviour.
Signed-off-by: David Sterba <dsterba@suse.com>
The fsid and chunk tree uuid are always located in the first page,
we don't need the to use write_extent_buffer.
Signed-off-by: David Sterba <dsterba@suse.com>
During the time, the function has been shrunk to the point that it just
calls find_extent_buffer, just passing the parameters.
Signed-off-by: David Sterba <dsterba@suse.com>
We dereference fs_info several times, besides that post-mount functions
should never see a NULL fs_info.
Signed-off-by: David Sterba <dsterba@suse.com>
The lock is held, we make the same lookup that previously failed with
EEXIST and we don't insert NULL pointers.
Signed-off-by: David Sterba <dsterba@suse.com>
Originally, the eb and start were passed separately in case eb is NULL.
Since the readahead has been refactored in 4.6, this is not true anymore
and we can get rid of the parameter.
Signed-off-by: David Sterba <dsterba@suse.com>
'start' is not used since "btrfs: reada: Pass reada_extent into
__readahead_hook directly" (6e39dbe8b9).
Signed-off-by: David Sterba <dsterba@suse.com>
We can't touch the eb directly in case the function is called with a
non-zero error, so we can read the eb level when needed.
Signed-off-by: David Sterba <dsterba@suse.com>
The helpers are not meant to be generic, the name is misleading. Convert
them to static inlines for type checking.
Signed-off-by: David Sterba <dsterba@suse.com>
They're not even documented anywhere, letting users with no recourse but
to RTFS. It's no big burden to output the bitfield as words.
Also, display unknown flags as hex.
Signed-off-by: Adam Borowski <kilobyte@angband.pl>
Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Signed-off-by: David Sterba <dsterba@suse.com>
My QEMU VM was seeing inexplicable I/O errors that I tracked down to
errors coming from the qcow2 virtual drive in the host system. The qcow2
file is a nocow file on my Btrfs drive, which QEMU opens with O_DIRECT.
Every once in awhile, pread() or pwrite() would return EEXIST, which
makes no sense. This turned out to be a bug in btrfs_get_extent().
Commit 8dff9c8534 ("Btrfs: deal with duplciates during extent_map
insertion in btrfs_get_extent") fixed a case in btrfs_get_extent() where
two threads race on adding the same extent map to an inode's extent map
tree. However, if the added em is merged with an adjacent em in the
extent tree, then we'll end up with an existing extent that is not
identical to but instead encompasses the extent we tried to add. When we
call merge_extent_mapping() to find the nonoverlapping part of the new
em, the arithmetic overflows because there is no such thing. We then end
up trying to add a bogus em to the em_tree, which results in a EEXIST
that can bubble all the way up to userspace.
Fix it by extending the identical extent map special case.
Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Tickets_id's name may result in some misunderstandings, it just indicates
the next ticket will be handled and is not stored per ticket.
Fixes: ce12965 ("btrfs: introduce tickets_id to determine whether
asynchronous metadata reclaim work makes progress")
Signed-off-by: Wang Xiaoguang <wangxg.fnst@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_map_block supports different types of mappings, which to a large
extent resemble block layer operations. But they don't always do, and
currently btrfs dangerously overlays it's own flag over the block layer
flags. This is just asking for a conflict, so introduce a different
map flags enum inside of btrfs instead.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We were setting the qgroup_rescan_running flag to true only after the
rescan worker started (which is a task run by a queue). So if a user
space task starts a rescan and immediately after asks to wait for the
rescan worker to finish, this second call might happen before the rescan
worker task starts running, in which case the rescan wait ioctl returns
immediatley, not waiting for the rescan worker to finish.
This was making the fstest btrfs/022 fail very often.
Fixes: d2c609b834 (btrfs: properly track when rescan worker is running)
Cc: stable@vger.kernel.org # 4.4+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
This can only happen with CONFIG_BTRFS_FS_CHECK_INTEGRITY=y.
Commit 1ba98d0 ("Btrfs: detect corruption when non-root leaf has zero item")
assumes that a leaf is its root when leaf->bytenr == btrfs_root_bytenr(root),
however, we should not use btrfs_root_bytenr(root) since it's mainly got
updated during committing transaction. So the check can fail when doing
COW on this leaf while it is a root.
This changes to use "if (leaf == btrfs_root_node(root))" instead, just like
how we check whether leaf is a root in __btrfs_cow_block().
Fixes: 1ba98d086f (Btrfs: detect corruption when non-root leaf has zero item)
Cc: stable@vger.kernel.org # 4.8+
Reported-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
After the last big change in the delayed references code that was needed
for the last qgroups rework, the red black tree node field of struct
btrfs_delayed_ref_node is no longer used, so just remove it, this helps
us save some memory (since struct rb_node is 24 bytes on x86_64) for
these structures.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
In commit 5bc7247ac4 (Btrfs: fix broken nocow after balance) we started
abusing the rtransid and otransid fields of root items from relocation
trees to fix some issues with nodatacow mode. However later in commit
ba8b028933 (Btrfs: do not reset last_snapshot after relocation) we
dropped the code that made use of those fields but did not remove
the code that sets those fields.
So just remove them to avoid confusion.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
During relocation of a data block group we create a relocation tree
for each fs/subvol tree by making a snapshot of each tree using
btrfs_copy_root() and the tree's commit root, and then setting the last
snapshot field for the fs/subvol tree's root to the value of the current
transaction id minus 1. However this can lead to relocation later
dropping references that it did not create if we have qgroups enabled,
leaving the filesystem in an inconsistent state that keeps aborting
transactions.
Lets consider the following example to explain the problem, which requires
qgroups to be enabled.
We are relocating data block group Y, we have a subvolume with id 258 that
has a root at level 1, that subvolume is used to store directory entries
for snapshots and we are currently at transaction 3404.
When committing transaction 3404, we have a pending snapshot and therefore
we call btrfs_run_delayed_items() at transaction.c:create_pending_snapshot()
in order to create its dentry at subvolume 258. This results in COWing
leaf A from root 258 in order to add the dentry. Note that leaf A
also contains file extent items referring to extents from some other
block group X (we are currently relocating block group Y). Later on, still
at create_pending_snapshot() we call qgroup_account_snapshot(), which
switches the commit root for root 258 when it calls switch_commit_roots(),
so now the COWed version of leaf A, lets call it leaf A', is accessible
from the commit root of tree 258. At the end of qgroup_account_snapshot(),
we call record_root_in_trans() with 258 as its argument, which results
in btrfs_init_reloc_root() being called, which in turn calls
relocation.c:create_reloc_root() in order to create a relocation tree
associated to root 258, which results in assigning the value of 3403
(which is the current transaction id minus 1 = 3404 - 1) to the
last_snapshot field of root 258. When creating the relocation tree root
at ctree.c:btrfs_copy_root() we add a shared reference for leaf A',
corresponding to the relocation tree's root, when we call btrfs_inc_ref()
against the COWed root (a copy of the commit root from tree 258), which
is at level 1. So at this point leaf A' has 2 references, one normal
reference corresponding to root 258 and one shared reference corresponding
to the root of the relocation tree.
Transaction 3404 finishes its commit and transaction 3405 is started by
relocation when calling merge_reloc_root() for the relocation tree
associated to root 258. In the meanwhile leaf A' is COWed again, in
response to some filesystem operation, when we are still at transaction
3405. However when we COW leaf A', at ctree.c:update_ref_for_cow(), we
call btrfs_block_can_be_shared() in order to figure out if other trees
refer to the leaf and if any such trees exists, add a full back reference
to leaf A' - but btrfs_block_can_be_shared() incorrectly returns false
because the following condition is false:
btrfs_header_generation(buf) <= btrfs_root_last_snapshot(&root->root_item)
which evaluates to 3404 <= 3403. So after leaf A' is COWed, it stays with
only one reference, corresponding to the shared reference we created when
we called btrfs_copy_root() to create the relocation tree's root and
btrfs_inc_ref() ends up not being called for leaf A' nor we end up setting
the flag BTRFS_BLOCK_FLAG_FULL_BACKREF in leaf A'. This results in not
adding shared references for the extents from block group X that leaf A'
refers to with its file extent items.
Later, after merging the relocation root we do a call to to
btrfs_drop_snapshot() in order to delete the relocation tree. This ends
up calling do_walk_down() when path->slots[1] points to leaf A', which
results in calling btrfs_lookup_extent_info() to get the number of
references for leaf A', which is 1 at this time (only the shared reference
exists) and this value is stored at wc->refs[0]. After this walk_up_proc()
is called when wc->level is 0 and path->nodes[0] corresponds to leaf A'.
Because the current level is 0 and wc->refs[0] is 1, it does call
btrfs_dec_ref() against leaf A', which results in removing the single
references that the extents from block group X have which are associated
to root 258 - the expectation was to have each of these extents with 2
references - one reference for root 258 and one shared reference related
to the root of the relocation tree, and so we would drop only the shared
reference (because leaf A' was supposed to have the flag
BTRFS_BLOCK_FLAG_FULL_BACKREF set).
This leaves the filesystem in an inconsistent state as we now have file
extent items in a subvolume tree that point to extents from block group X
without references in the extent tree. So later on when we try to decrement
the references for these extents, for example due to a file unlink operation,
truncate operation or overwriting ranges of a file, we fail because the
expected references do not exist in the extent tree.
This leads to warnings and transaction aborts like the following:
[ 588.965795] ------------[ cut here ]------------
[ 588.965815] WARNING: CPU: 2 PID: 2479 at fs/btrfs/extent-tree.c:1625 lookup_inline_extent_backref+0x432/0x5b0 [btrfs]
[ 588.965816] Modules linked in: af_packet iscsi_ibft iscsi_boot_sysfs xfs libcrc32c ppdev acpi_cpufreq button tpm_tis e1000 i2c_piix4 pcspkr parport_pc
parport tpm qemu_fw_cfg joydev btrfs xor raid6_pq sr_mod cdrom ata_generic virtio_scsi ata_piix virtio_pci bochs_drm virtio_ring drm_kms_helper syscopyarea
sysfillrect sysimgblt fb_sys_fops virtio ttm serio_raw drm floppy sg
[ 588.965831] CPU: 2 PID: 2479 Comm: kworker/u8:7 Not tainted 4.7.3-3-default-fdm+ #1
[ 588.965832] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.1-0-gb3ef39f-prebuilt.qemu-project.org 04/01/2014
[ 588.965844] Workqueue: btrfs-extent-refs btrfs_extent_refs_helper [btrfs]
[ 588.965845] 0000000000000000 ffff8802263bfa28 ffffffff813af542 0000000000000000
[ 588.965847] 0000000000000000 ffff8802263bfa68 ffffffff81081e8b 0000065900000000
[ 588.965848] ffff8801db2af000 000000012bbe2000 0000000000000000 ffff880215703b48
[ 588.965849] Call Trace:
[ 588.965852] [<ffffffff813af542>] dump_stack+0x63/0x81
[ 588.965854] [<ffffffff81081e8b>] __warn+0xcb/0xf0
[ 588.965855] [<ffffffff81081f7d>] warn_slowpath_null+0x1d/0x20
[ 588.965863] [<ffffffffa0175042>] lookup_inline_extent_backref+0x432/0x5b0 [btrfs]
[ 588.965865] [<ffffffff81143220>] ? trace_clock_local+0x10/0x30
[ 588.965867] [<ffffffff8114c5df>] ? rb_reserve_next_event+0x6f/0x460
[ 588.965875] [<ffffffffa0175215>] insert_inline_extent_backref+0x55/0xd0 [btrfs]
[ 588.965882] [<ffffffffa017531f>] __btrfs_inc_extent_ref.isra.55+0x8f/0x240 [btrfs]
[ 588.965890] [<ffffffffa017acea>] __btrfs_run_delayed_refs+0x74a/0x1260 [btrfs]
[ 588.965892] [<ffffffff810cb046>] ? cpuacct_charge+0x86/0xa0
[ 588.965900] [<ffffffffa017e74f>] btrfs_run_delayed_refs+0x9f/0x2c0 [btrfs]
[ 588.965908] [<ffffffffa017ea04>] delayed_ref_async_start+0x94/0xb0 [btrfs]
[ 588.965918] [<ffffffffa01c799a>] btrfs_scrubparity_helper+0xca/0x350 [btrfs]
[ 588.965928] [<ffffffffa01c7c5e>] btrfs_extent_refs_helper+0xe/0x10 [btrfs]
[ 588.965930] [<ffffffff8109b323>] process_one_work+0x1f3/0x4e0
[ 588.965931] [<ffffffff8109b658>] worker_thread+0x48/0x4e0
[ 588.965932] [<ffffffff8109b610>] ? process_one_work+0x4e0/0x4e0
[ 588.965934] [<ffffffff810a1659>] kthread+0xc9/0xe0
[ 588.965936] [<ffffffff816f2f1f>] ret_from_fork+0x1f/0x40
[ 588.965937] [<ffffffff810a1590>] ? kthread_worker_fn+0x170/0x170
[ 588.965938] ---[ end trace 34e5232c933a1749 ]---
[ 588.966187] ------------[ cut here ]------------
[ 588.966196] WARNING: CPU: 2 PID: 2479 at fs/btrfs/extent-tree.c:2966 btrfs_run_delayed_refs+0x28c/0x2c0 [btrfs]
[ 588.966196] BTRFS: Transaction aborted (error -5)
[ 588.966197] Modules linked in: af_packet iscsi_ibft iscsi_boot_sysfs xfs libcrc32c ppdev acpi_cpufreq button tpm_tis e1000 i2c_piix4 pcspkr parport_pc
parport tpm qemu_fw_cfg joydev btrfs xor raid6_pq sr_mod cdrom ata_generic virtio_scsi ata_piix virtio_pci bochs_drm virtio_ring drm_kms_helper syscopyarea
sysfillrect sysimgblt fb_sys_fops virtio ttm serio_raw drm floppy sg
[ 588.966206] CPU: 2 PID: 2479 Comm: kworker/u8:7 Tainted: G W 4.7.3-3-default-fdm+ #1
[ 588.966207] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.1-0-gb3ef39f-prebuilt.qemu-project.org 04/01/2014
[ 588.966217] Workqueue: btrfs-extent-refs btrfs_extent_refs_helper [btrfs]
[ 588.966217] 0000000000000000 ffff8802263bfc98 ffffffff813af542 ffff8802263bfce8
[ 588.966219] 0000000000000000 ffff8802263bfcd8 ffffffff81081e8b 00000b96345ee000
[ 588.966220] ffffffffa021ae1c ffff880215703b48 00000000000005fe ffff8802345ee000
[ 588.966221] Call Trace:
[ 588.966223] [<ffffffff813af542>] dump_stack+0x63/0x81
[ 588.966224] [<ffffffff81081e8b>] __warn+0xcb/0xf0
[ 588.966225] [<ffffffff81081eff>] warn_slowpath_fmt+0x4f/0x60
[ 588.966233] [<ffffffffa017e93c>] btrfs_run_delayed_refs+0x28c/0x2c0 [btrfs]
[ 588.966241] [<ffffffffa017ea04>] delayed_ref_async_start+0x94/0xb0 [btrfs]
[ 588.966250] [<ffffffffa01c799a>] btrfs_scrubparity_helper+0xca/0x350 [btrfs]
[ 588.966259] [<ffffffffa01c7c5e>] btrfs_extent_refs_helper+0xe/0x10 [btrfs]
[ 588.966260] [<ffffffff8109b323>] process_one_work+0x1f3/0x4e0
[ 588.966261] [<ffffffff8109b658>] worker_thread+0x48/0x4e0
[ 588.966263] [<ffffffff8109b610>] ? process_one_work+0x4e0/0x4e0
[ 588.966264] [<ffffffff810a1659>] kthread+0xc9/0xe0
[ 588.966265] [<ffffffff816f2f1f>] ret_from_fork+0x1f/0x40
[ 588.966267] [<ffffffff810a1590>] ? kthread_worker_fn+0x170/0x170
[ 588.966268] ---[ end trace 34e5232c933a174a ]---
[ 588.966269] BTRFS: error (device sda2) in btrfs_run_delayed_refs:2966: errno=-5 IO failure
[ 588.966270] BTRFS info (device sda2): forced readonly
This was happening often on openSUSE and SLE systems using btrfs as the
root filesystem (with its default layout where multiple subvolumes are
used) where balance happens in the background triggered by a cron job and
snapshots are automatically created before/after package installations,
upgrades and removals. The issue could be triggered simply by running the
following loop on the first system boot post installation:
while true; do
zypper -n in nfs-kernel-server
zypper -n rm nfs-kernel-server
done
(If we were fast enough and made that loop before the cron job triggered
a balance operation and the balance finished)
So fix by setting the last_snapshot field of the root to the value of the
generation of its commit root. Like this btrfs_block_can_be_shared()
behaves correctly for the case where the relocation root is created during
a transaction commit and for the case where it's created before a
transaction commit.
Fixes: 6426c7ad69 (btrfs: qgroup: Fix qgroup accounting when creating snapshot)
Cc: stable@vger.kernel.org # 4.7+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Pull btrfs fixes from Chris Mason:
"Some fixes that Dave Sterba collected. We held off on these last week
because I was focused on the memory corruption testing"
* 'for-4.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix WARNING in btrfs_select_ref_head()
Btrfs: remove some no-op casts
btrfs: pass correct args to btrfs_async_run_delayed_refs()
btrfs: make file clone aware of fatal signals
btrfs: qgroup: Prevent qgroup->reserved from going subzero
Btrfs: kill BUG_ON in do_relocation
Remove the WRITE_* and READ_SYNC wrappers, and just use the flags
directly. Where applicable this also drops usage of the
bio_set_op_attrs wrapper.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
Pull btrfs fixes from Chris Mason:
"My patch fixes the btrfs list_head abuse that we tracked down during
Dave Jones' memory corruption investigation. With both Jens and my
patches in place, I'm no longer able to trigger problems.
Filipe is fixing a difficult old bug between snapshots, balance and
send. Dave is cooking a few more for the next rc, but these are tested
and ready"
* 'for-linus-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
btrfs: fix races on root_log_ctx lists
btrfs: fix incremental send failure caused by balance
Now that we don't need the common flags to overflow outside the range
of a 32-bit type we can encode them the same way for both the bio and
request fields. This in addition allows us to place the operation
first (and make some room for more ops while we're at it) and to
stop having to shift around the operation values.
In addition this allows passing around only one value in the block layer
instead of two (and eventuall also in the file systems, but we can do
that later) and thus clean up a lot of code.
Last but not least this allows decreasing the size of the cmd_flags
field in struct request to 32-bits. Various functions passing this
value could also be updated, but I'd like to avoid the churn for now.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
btrfs_remove_all_log_ctxs takes a shortcut where it avoids walking the
list because it knows all of the waiters are patiently waiting for the
commit to finish.
But, there's a small race where btrfs_sync_log can remove itself from
the list if it finds a log commit is already done. Also, it uses
list_del_init() to remove itself from the list, but there's no way to
know if btrfs_remove_all_log_ctxs has already run, so we don't know for
sure if it is safe to call list_del_init().
This gets rid of all the shortcuts for btrfs_remove_all_log_ctxs(), and
just calls it with the proper locking.
This is part two of the corruption fixed by cbd60aa7cd. I should have
done this in the first place, but convinced myself the optimizations were
safe. A 12 hour run of dbench 2048 will eventually trigger a list debug
WARN_ON for the list_del_init() in btrfs_sync_log().
Fixes: d1433debe7
Reported-by: Dave Jones <davej@codemonkey.org.uk>
cc: stable@vger.kernel.org # 3.15+
Signed-off-by: Chris Mason <clm@fb.com>
This issue was found when testing in-band dedupe enospc behaviour,
sometimes run_one_delayed_ref() may fail for enospc reason, then
__btrfs_run_delayed_refs（）will return, but forget to add num_heads_read
back, which will trigger "WARN_ON(delayed_refs->num_heads_ready == 0)" in
btrfs_select_ref_head().
Signed-off-by: Wang Xiaoguang <wangxg.fnst@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We cast 0 to a u8 but then because of type promotion, it's immediately
cast to int back to int before we do a bitwise negate. The cast doesn't
matter in this case, the code works as intended. It causes a static
checker warning though so let's remove it.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In btrfs_truncate_inode_items()->btrfs_async_run_delayed_refs(), we
swap the arg2 and arg3 wrongly, fix this.
This bug just impacts asynchronous delayed refs handle when we truncate inodes.
In delayed_ref_async_start(), there is such codes:
trans = btrfs_join_transaction(async->root);
if (trans->transid > async->transid)
goto end;
ret = btrfs_run_delayed_refs(trans, async->root, async->count);
From this codes, we can see that this just influence whether can we handle
delayed refs or the number of delayed refs to handle, this may impact
performance, but will not result in missing delayed refs, all delayed refs will
be handled in btrfs_commit_transaction().
Signed-off-by: Wang Xiaoguang <wangxg.fnst@cn.fujitsu.com>
Reviewed-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Indeed this just make the behavior similar to xfs when process has
fatal signals pending, and it'll make fstests/generic/298 happy.
Signed-off-by: Wang Xiaoguang <wangxg.fnst@cn.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
While free'ing qgroup->reserved resources, we much check if
the page has not been invalidated by a truncate operation
by checking if the page is still dirty before reducing the
qgroup resources. Resources in such a case are free'd when
the entire extent is released by delayed_ref.
This fixes a double accounting while releasing resources
in case of truncating a file, reproduced by the following testcase.
SCRATCH_DEV=/dev/vdb
SCRATCH_MNT=/mnt
mkfs.btrfs -f $SCRATCH_DEV
mount -t btrfs $SCRATCH_DEV $SCRATCH_MNT
cd $SCRATCH_MNT
btrfs quota enable $SCRATCH_MNT
btrfs subvolume create a
btrfs qgroup limit 500m a $SCRATCH_MNT
sync
for c in {1..15}; do
dd if=/dev/zero bs=1M count=40 of=$SCRATCH_MNT/a/file;
done
sleep 10
sync
sleep 5
touch $SCRATCH_MNT/a/newfile
echo "Removing file"
rm $SCRATCH_MNT/a/file
Fixes: b9d0b38928 ("btrfs: Add handler for invalidate page")
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Reviewed-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
While updating btree, we try to push items between sibling
nodes/leaves in order to keep height as low as possible.
But we don't memset the original places with zero when
pushing items so that we could end up leaving stale content
in nodes/leaves. One may read the above stale content by
increasing btree blocks' @nritems.
One case I've come across is that in fs tree, a leaf has two
parent nodes, hence running balance ends up with processing
this leaf with two parent nodes, but it can only reach the
valid parent node through btrfs_search_slot, so it'd be like,
do_relocation
for P in all parent nodes of block A:
if !P->eb:
btrfs_search_slot(key); --> get path from P to A.
if lowest:
BUG_ON(A->bytenr != bytenr of A recorded in P);
btrfs_cow_block(P, A); --> change A's bytenr in P.
After btrfs_cow_block, P has the new bytenr of A, but with the
same @key, we get the same path again, and get panic by BUG_ON.
Note that this is only happening in a corrupted fs, for a
regular fs in which we have correct @nritems so that we won't
read stale content in any case.
Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Pull btrfs fixes from Chris Mason:
"Some fixes from Omar and Dave Sterba for our new free space tree.
This isn't heavily used yet, but as we move toward making it the new
default we wanted to nail down an endian bug"
* 'for-linus-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
btrfs: tests: uninline member definitions in free_space_extent
btrfs: tests: constify free space extent specs
Btrfs: expand free space tree sanity tests to catch endianness bug
Btrfs: fix extent buffer bitmap tests on big-endian systems
Btrfs: catch invalid free space trees
Btrfs: fix mount -o clear_cache,space_cache=v2
Btrfs: fix free space tree bitmaps on big-endian systems
Pull btrfs updates from Chris Mason:
"This is a big variety of fixes and cleanups.
Liu Bo continues to fixup fuzzer related problems, and some of Josef's
cleanups are prep for his bigger extent buffer changes (slated for
v4.10)"
* 'for-linus-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: (39 commits)
Revert "btrfs: let btrfs_delete_unused_bgs() to clean relocated bgs"
Btrfs: remove unnecessary btrfs_mark_buffer_dirty in split_leaf
Btrfs: don't BUG() during drop snapshot
btrfs: fix btrfs_no_printk stub helper
Btrfs: memset to avoid stale content in btree leaf
btrfs: parent_start initialization cleanup
btrfs: Remove already completed TODO comment
btrfs: Do not reassign count in btrfs_run_delayed_refs
btrfs: fix a possible umount deadlock
Btrfs: fix memory leak in do_walk_down
btrfs: btrfs_debug should consume fs_info when DEBUG is not defined
btrfs: convert send's verbose_printk to btrfs_debug
btrfs: convert pr_* to btrfs_* where possible
btrfs: convert printk(KERN_* to use pr_* calls
btrfs: unsplit printed strings
btrfs: clean the old superblocks before freeing the device
Btrfs: kill BUG_ON in run_delayed_tree_ref
Btrfs: don't leak reloc root nodes on error
btrfs: squash lines for simple wrapper functions
Btrfs: improve check_node to avoid reading corrupted nodes
...
Pull more vfs updates from Al Viro:
">rename2() work from Miklos + current_time() from Deepa"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fs: Replace current_fs_time() with current_time()
fs: Replace CURRENT_TIME_SEC with current_time() for inode timestamps
fs: Replace CURRENT_TIME with current_time() for inode timestamps
fs: proc: Delete inode time initializations in proc_alloc_inode()
vfs: Add current_time() api
vfs: add note about i_op->rename changes to porting
fs: rename "rename2" i_op to "rename"
vfs: remove unused i_op->rename
fs: make remaining filesystems use .rename2
libfs: support RENAME_NOREPLACE in simple_rename()
fs: support RENAME_NOREPLACE for local filesystems
ncpfs: fix unused variable warning
Pull vfs xattr updates from Al Viro:
"xattr stuff from Andreas
This completes the switch to xattr_handler ->get()/->set() from
->getxattr/->setxattr/->removexattr"
* 'work.xattr' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
vfs: Remove {get,set,remove}xattr inode operations
xattr: Stop calling {get,set,remove}xattr inode operations
vfs: Check for the IOP_XATTR flag in listxattr
xattr: Add __vfs_{get,set,remove}xattr helpers
libfs: Use IOP_XATTR flag for empty directory handling
vfs: Use IOP_XATTR flag for bad-inode handling
vfs: Add IOP_XATTR inode operations flag
vfs: Move xattr_resolve_name to the front of fs/xattr.c
ecryptfs: Switch to generic xattr handlers
sockfs: Get rid of getxattr iop
sockfs: getxattr: Fail with -EOPNOTSUPP for invalid attribute names
kernfs: Switch to generic xattr handlers
hfs: Switch to generic xattr handlers
jffs2: Remove jffs2_{get,set,remove}xattr macros
xattr: Remove unnecessary NULL attribute name check
This reverts commit 5d8eb6fe51.
When we remove devices, we free the device structures. Delaying
btfs_remove_chunk() ends up hitting a use-after-free on them.
Signed-off-by: Chris Mason <clm@fb.com>
Pull splice fixups from Al Viro:
"A couple of fixups for interaction of pipe-backed iov_iter with
O_DIRECT reads + constification of a couple of primitives in uio.h
missed by previous rounds.
Kudos to davej - his fuzzing has caught those bugs"
* 'work.splice_read' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
[btrfs] fix check_direct_IO() for non-iovec iterators
constify iov_iter_count() and iter_is_iovec()
fix ITER_PIPE interaction with direct_IO
Pull misc vfs updates from Al Viro:
"Assorted misc bits and pieces.
There are several single-topic branches left after this (rename2
series from Miklos, current_time series from Deepa Dinamani, xattr
series from Andreas, uaccess stuff from from me) and I'd prefer to
send those separately"
* 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (39 commits)
proc: switch auxv to use of __mem_open()
hpfs: support FIEMAP
cifs: get rid of unused arguments of CIFSSMBWrite()
posix_acl: uapi header split
posix_acl: xattr representation cleanups
fs/aio.c: eliminate redundant loads in put_aio_ring_file
fs/internal.h: add const to ns_dentry_operations declaration
compat: remove compat_printk()
fs/buffer.c: make __getblk_slow() static
proc: unsigned file descriptors
fs/file: more unsigned file descriptors
fs: compat: remove redundant check of nr_segs
cachefiles: Fix attempt to read i_blocks after deleting file [ver #2]
cifs: don't use memcpy() to copy struct iov_iter
get rid of separate multipage fault-in primitives
fs: Avoid premature clearing of capabilities
fs: Give dentry to inode_change_ok() instead of inode
fuse: Propagate dentry down to inode_change_ok()
ceph: Propagate dentry down to inode_change_ok()
xfs: Propagate dentry down to inode_change_ok()
...
looking for duplicate ->iov_base makes sense only for
iovec-backed iterators; for kvec-backed ones it's pointless,
for bvec-backed ones it's pointless and broken on 32bit (we
walk through an array of struct bio_vec accessing them as if
they were struct iovec; works by accident on 64bit, but on
32bit it'll blow up) and for pipe-backed ones it's pointless
and ends up oopsing.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
These inode operations are no longer used; remove them.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Pull block layer updates from Jens Axboe:
"This is the main pull request for block layer changes in 4.9.
As mentioned at the last merge window, I've changed things up and now
do just one branch for core block layer changes, and driver changes.
This avoids dependencies between the two branches. Outside of this
main pull request, there are two topical branches coming as well.
This pull request contains:
- A set of fixes, and a conversion to blk-mq, of nbd. From Josef.
- Set of fixes and updates for lightnvm from Matias, Simon, and Arnd.
Followup dependency fix from Geert.
- General fixes from Bart, Baoyou, Guoqing, and Linus W.
- CFQ async write starvation fix from Glauber.
- Add supprot for delayed kick of the requeue list, from Mike.
- Pull out the scalable bitmap code from blk-mq-tag.c and make it
generally available under the name of sbitmap. Only blk-mq-tag uses
it for now, but the blk-mq scheduling bits will use it as well.
From Omar.
- bdev thaw error progagation from Pierre.
- Improve the blk polling statistics, and allow the user to clear
them. From Stephen.
- Set of minor cleanups from Christoph in block/blk-mq.
- Set of cleanups and optimizations from me for block/blk-mq.
- Various nvme/nvmet/nvmeof fixes from the various folks"
* 'for-4.9/block' of git://git.kernel.dk/linux-block: (54 commits)
fs/block_dev.c: return the right error in thaw_bdev()
nvme: Pass pointers, not dma addresses, to nvme_get/set_features()
nvme/scsi: Remove power management support
nvmet: Make dsm number of ranges zero based
nvmet: Use direct IO for writes
admin-cmd: Added smart-log command support.
nvme-fabrics: Add host_traddr options field to host infrastructure
nvme-fabrics: revise host transport option descriptions
nvme-fabrics: rework nvmf_get_address() for variable options
nbd: use BLK_MQ_F_BLOCKING
blkcg: Annotate blkg_hint correctly
cfq: fix starvation of asynchronous writes
blk-mq: add flag for drivers wanting blocking ->queue_rq()
blk-mq: remove non-blocking pass in blk_mq_map_request
blk-mq: get rid of manual run of queue with __blk_mq_run_hw_queue()
block: export bio_free_pages to other modules
lightnvm: propagate device_add() error code
lightnvm: expose device geometry through sysfs
lightnvm: control life of nvm_dev in driver
blk-mq: register device instead of disk
...
The free space tree format conversion functions were broken on
big-endian systems, but the sanity tests didn't catch it because all of
the operations were aligned to multiple words. This was meant to catch
any bugs in the extent buffer code's handling of high memory, but it
ended up hiding the endianness bug. Expand the tests to do both
sector-aligned and page-aligned operations.
Tested-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The in-memory bitmap code manipulates words and is therefore sensitive
to endianness, while the extent buffer bitmap code addresses bytes and
is byte-order agnostic. Because the byte addressing of the extent buffer
bitmaps is equivalent to a little-endian in-memory bitmap, the extent
buffer bitmap tests fail on big-endian systems.
34b3e6c92a ("Btrfs: self-tests: Fix extent buffer bitmap test fail on
BE system") worked around another endianness bug in the tests but missed
this one because ed9e4afdb0 ("Btrfs: self-tests: Execute page
straddling test only when nodesize < PAGE_SIZE") disables this part of
the test on ppc64. That change lost the original meaning of the test,
however. We really want to test that an equivalent series of operations
using the in-memory bitmap API and the extent buffer bitmap API produces
equivalent results.
To fix this, don't use memcmp_extent_buffer() or write_extent_buffer();
do everything bit-by-bit.
Reported-by: Anatoly Pugachev <matorola@gmail.com>
Tested-by: Anatoly Pugachev <matorola@gmail.com>
Tested-by: Feifei Xu <xufeifei@linux.vnet.ibm.com>
Tested-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There are two separate issues that can lead to corrupted free space
trees.
1. The free space tree bitmaps had an endianness issue on big-endian
systems which is fixed by an earlier patch in this series.
2. btrfs-progs before v4.7.3 modified filesystems without updating the
free space tree.
To catch both of these issues at once, we need to force the free space
tree to be rebuilt. To do so, add a FREE_SPACE_TREE_VALID compat_ro bit.
If the bit isn't set, we know that it was either produced by a broken
big-endian kernel or may have been corrupted by btrfs-progs.
This also provides us with a way to add rudimentary read-write support
for the free space tree to btrfs-progs: it can just clear this bit and
have the kernel rebuild the free space tree.
Cc: stable@vger.kernel.org # 4.5+
Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Tested-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We moved the code for creating the free space tree the first time that
it's enabled, but didn't move the clearing code along with it. This
breaks my (undocumented) intention that `mount -o
clear_cache,space_cache=v2` would clear the free space tree and then
recreate it.
Fixes: 511711af91 ("btrfs: don't run delayed references while we are creating the free space tree")
Cc: stable@vger.kernel.org # 4.5+
Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Tested-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In convert_free_space_to_{bitmaps,extents}(), we buffer the free space
bitmaps in memory and copy them directly to/from the extent buffers with
{read,write}_extent_buffer(). The extent buffer bitmap helpers use byte
granularity, which is equivalent to a little-endian bitmap. This means
that on big-endian systems, the in-memory bitmaps will be written to
disk byte-swapped. To fix this, use byte-granularity for the bitmaps in
memory.
Fixes: a5ed918285 ("Btrfs: implement the free space B-tree")
Cc: stable@vger.kernel.org # 4.5+
Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Tested-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Remove the unnecessary typedefs and the zero-length a_entries array in
struct posix_acl_xattr_header.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
current_fs_time() uses struct super_block* as an argument.
As per Linus's suggestion, this is changed to take struct
inode* as a parameter instead. This is because the function
is primarily meant for vfs inode timestamps.
Also the function was renamed as per Arnd's suggestion.
Change all calls to current_fs_time() to use the new
current_time() function instead. current_fs_time() will be
deleted.
Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
When we're not able to get enough space through splitting leaf,
we'd create a new sibling leaf instead, and it's possible that we return
a zero-nritem sibling leaf and mark it dirty before it's in a consistent
state. With CONFIG_BTRFS_FS_CHECK_INTEGRITY=y, the integrity check of
check_leaf will report panic due to this zero-nritem non-root leaf.
This removes the unnecessary btrfs_mark_buffer_dirty.
Reported-by: Filipe Manana <fdmanana@gmail.com>
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Really there's lots of things that can go wrong here, kill all the
BUG_ON()'s and replace the logic ones with ASSERT()'s and return EIO
instead.
Signed-off-by: Josef Bacik <jbacik@fb.com>
[ switched to btrfs_err, errors go to common label ]
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The addition of btrfs_no_printk() caused a build failure when
CONFIG_PRINTK is disabled:
fs/btrfs/send.c: In function 'send_rename':
fs/btrfs/ctree.h:3367:2: error: implicit declaration of function 'btrfs_no_printk' [-Werror=implicit-function-declaration]
This moves the helper outside of that #ifdef so it is always
defined, and changes the existing #ifdef to refer to that
helper as well for consistency.
Fixes: 47c57058ff2c ("btrfs: btrfs_debug should consume fs_info when DEBUG is not defined")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This is an additional patch to
"Btrfs: memset to avoid stale content in btree node block".
This uses memset to initialize the unused space in a leaf to avoid
potential stale content, which may be incurred by pushing items
between sibling leaves.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Code cleanup. parent_start is initialized multiple times when it is
not necessary to do so.
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Code cleanup. count is already (unsgined long)-1. That is the reason
run_all was set. Do not reassign it (unsigned long)-1.
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The extent buffer 'next' needs to be free'd conditionally.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We can hit unused variable warnings when btrfs_debug and friends are
just aliases for no_printk. This is due to the fs_info not getting
consumed by the function call, which can happen if convenenience
variables are used. This patch adds a new btrfs_no_printk static inline
that consumes the convenience variable and does nothing else. It
silences the unused variable warning and has no impact on the generated
code:
$ size fs/btrfs/extent_io.o*
text data bss dec hex filename
44072 152 32 44256 ace0 fs/btrfs/extent_io.o.btrfs_no_printk
44072 152 32 44256 ace0 fs/btrfs/extent_io.o.no_printk
Fixes: 27a0dd61a5 (Btrfs: make btrfs_debug match pr_debug handling related to DEBUG)
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This was basically an open-coded, less flexible dynamic printk. We can
just use btrfs_debug instead.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
For many printks, we want to know which file system issued the message.
This patch converts most pr_* calls to use the btrfs_* versions instead.
In some cases, this means adding plumbing to allow call sites access to
an fs_info pointer.
fs/btrfs/check-integrity.c is left alone for another day.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This patch converts printk(KERN_* style messages to use the pr_* versions.
One side effect is that anything that was KERN_DEBUG is now automatically
a dynamic debug message.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
CodingStyle chapter 2:
"[...] never break user-visible strings such as printk messages,
because that breaks the ability to grep for them."
This patch unsplits user-visible strings.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_rm_device frees the block device but then re-opens it using
the saved device name. A race exists between the close and the
re-open that allows the block size to be changed. The result
is getting stuck forever in the reclaim loop in __getblk_slow.
This patch moves the superblock cleanup before closing the block
device, which is also consistent with other callers. We also don't
need a private copy of dev_name as the whole routine operates under
the uuid_mutex.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In a corrupted btrfs image, we can come across this BUG_ON and
get an unreponsive system, but if we return errors instead,
its caller can handle everything gracefully by aborting the current
transaction.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We don't track the reloc roots in any sort of normal way, so the only way the
root/commit_root nodes get free'd is if the relocation finishes successfully and
the reloc root is deleted. Fix this by free'ing them in free_reloc_roots.
Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We need to check items in a node to make sure that we're reading
a valid one, otherwise we could get various crashes while processing
delayed_refs.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Somehow we missed btrfs_print_tree when last time we
updated error handling for read_extent_block().
This keeps us from getting a NULL pointer panic when
btrfs_print_tree's read_extent_block() fails.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Since we could get errors from the concurrent aborted transaction,
the check of this BUG_ON in start_transaction is not true any more.
Say, while flushing free space cache inode's dirty pages,
btrfs_finish_ordered_io
-> btrfs_join_transaction_nolock
(the transaction has been aborted.)
-> BUG_ON(type == TRANS_JOIN_NOLOCK);
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
During updating btree, we could push items between sibling
nodes/leaves, for leaves data sections starts reversely from
the end of the block while for nodes we only have key pairs
which are stored one by one from the start of the block.
So we could do try to push key pairs from one node to the next
node right in the tree, and after that, we update the node's
nritems to reflect the correct end while leaving the stale
content in the node. One may intentionally corrupt the fs
image and access the stale content by bumping the nritems and
causes various crashes.
This takes the in-memory @nritems as the correct one and
gets to memset the unused part of a btree node.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When relocating tree blocks, we firstly get block information from
back references in the extent tree, we then search fs tree to try to
find all parents of a block.
However, if fs tree is corrupted, eg. if there're some missing
items, we could come across these WARN_ONs and BUG_ONs.
This makes us print some error messages and return gracefully
from balance.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
No reason to bug on in here, fs corruption could easily cause these things to
happen.
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Nobody uses this, it makes no sense to do partial reads of extent buffers.
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We have a lot of random ints in btrfs_fs_info that can be put into flags. This
is mostly equivalent with the exception of how we deal with quota going on or
off, now instead we set a flag when we are turning it on or off and deal with
that appropriately, rather than just having a pending state that the current
quota_enabled gets set to. Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Extend btrfs_set_extent_delalloc() and extent_clear_unlock_delalloc()
parameters for both in-band dedupe and subpage sector size patchset.
This should reduce conflict of both patchset and the effort to rebase
them.
Cc: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Cc: David Sterba <dsterba@suse.cz>
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We can re-use the dynamic debugging descriptor to make use of the dynamic
debugging mechanism but still use our own printk interface.
Defining the DEBUG macro works as it did before. When it's defined,
all of the messages default to print. We can also enable all debug
messages at boot or module-load time using the 'dyndbg' and
'btrfs.dyndbg' options.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Variable 'gen' in reada_for_search() is not used since commit 58dc4ce432
("btrfs: remove unused parameter from readahead_tree_block"). This patch
simply removes this variable.
Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Variable 'blocksize' in reada_walk_down() is not used since commit
d3e46fea1b ("btrfs: sink blocksize parameter to readahead_tree_block").
This patch simply removes this variable.
Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently, btrfs_relocate_chunk() is removing relocated BG by itself. But
the work can be done by btrfs_delete_unused_bgs() (and it's better since it
trim the BG). Let's dedupe the code.
While btrfs_delete_unused_bgs() is already hitting the relocated BG, it
skip the BG since the BG has "ro" flag set (to keep balancing BG intact).
On the other hand, btrfs cannot drop "ro" flag here to prevent additional
writes. So this patch make use of "removed" flag.
btrfs_delete_unused_bgs() now detect the flag to distinguish whether a
read-only BG is relocating or not.
Signed-off-by: Naohiro Aota <naohiro.aota@hgst.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently we allow inconsistence about mixed flag
(BTRFS_BLOCK_GROUP_METADATA | BTRFS_BLOCK_GROUP_DATA).
We'd get ENOSPC if block group has mixed flag and btrfs doesn't.
If that happens, we have one space_info with mixed flag and another
space_info only with BTRFS_BLOCK_GROUP_METADATA, and
global_block_rsv.space_info points to the latter one, but all bytes
from block_group contributes to the mixed space_info, thus all the
allocation will fail with ENOSPC.
This adds a check for the above case.
Reported-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
[ updated message ]
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
So we can read a btree block via readahead or intentional read,
and we can end up with a memory leak when something happens as
follows,
1) readahead starts to read block A but does not wait for read
completion,
2) btree_readpage_end_io_hook finds that block A is corrupted,
and it needs to clear all block A's pages' uptodate bit.
3) meanwhile an intentional read kicks in and checks block A's
pages' uptodate to decide which page needs to be read.
4) when some pages have the uptodate bit during 3)'s check so
3) doesn't count them for eb->io_pages, but they are later
cleared by 2) so we has to readpage on the page, we get
the wrong eb->io_pages which results in a memory leak of
this block.
This fixes the problem by firstly getting all pages's locking and
then checking pages' uptodate bit.
t1(readahead) t2(readahead endio) t3(the following read)
read_extent_buffer_pages end_bio_extent_readpage
for pg in eb: for page 0,1,2 in eb:
if pg is uptodate: btree_readpage_end_io_hook(pg)
num_reads++ if uptodate:
eb->io_pages = num_reads SetPageUptodate(pg) _______________
for pg in eb: for page 3 in eb: read_extent_buffer_pages
if pg is NOT uptodate: btree_readpage_end_io_hook(pg) for pg in eb:
__extent_read_full_page(pg) sanity check reports something wrong if pg is uptodate:
clear_extent_buffer_uptodate(eb) num_reads++
for pg in eb: eb->io_pages = num_reads
ClearPageUptodate(page) _______________
for pg in eb:
if pg is NOT uptodate:
__extent_read_full_page(pg)
So t3's eb->io_pages is not consistent with the number of pages it's reading,
and during endio(), atomic_dec_and_test(&eb->io_pages) will get a negative
number so that we're not able to free the eb.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This BUG() has been triggered by a fuzz testing image, which contains
an invalid chunk type, ie. a single stripe chunk has the raid6 type.
Btrfs can handle this gracefully by returning -EIO, so besides using
btrfs_warn to give us more debugging information rather than a single
BUG(), we can return error properly.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Only in the case of different root_id or different object_id, check_shared
identified extent as the shared. However, If a extent was referred by
different offset of same file, it should also be identified as shared.
In addition, check_shared's loop scale is at least n^3, so if a extent
has too many references, even causes soft hang up.
First, add all delayed_ref to the ref_tree and calculate the unqiue_refs,
if the unique_refs is greater than one, return BACKREF_FOUND_SHARED.
Then individually add the on-disk reference(inline/keyed) to the ref_tree
and calculate the unique_refs of the ref_tree to check if the unique_refs
is greater than one.Because once there are two references to return
SHARED, so the time complexity is close to the constant.
Reported-by: Tsutomu Itoh <t-itoh@jp.fujitsu.com>
Signed-off-by: Lu Fengqi <lufq.fnst@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs provides a helpful demonstration of how to export
a global variable via debugfs; however, it is unique among
other debugfs files in that it is world-writable, which causes
some concern to people who are not familiar with its purpose.
Fix it so that it is only user-writable.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
While processing delayed refs, we may update block group's statistics
and attach it to cur_trans->dirty_bgs, and later writing dirty block
groups will process the list, which happens during
btrfs_commit_transaction().
For whatever reason, the transaction is aborted and dirty_bgs
is not processed in cleanup_transaction(), we end up with memory leak
of these dirty block group cache.
Since btrfs_start_dirty_block_groups() doesn't make it go to the commit
critical section, this also adds the cleanup work inside it.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Pull btrfs fixes from Chris Mason:
"Josef fixed a problem when quotas are enabled with his latest ENOSPC
rework, and Jeff added more checks into the subvol ioctls to avoid
tripping up lookup_one_len"
* 'for-linus-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
btrfs: ensure that file descriptor used with subvol ioctls is a dir
Btrfs: handle quota reserve failure properly
inode_change_ok() will be resposible for clearing capabilities and IMA
extended attributes and as such will need dentry. Give it as an argument
to inode_change_ok() instead of an inode. Also rename inode_change_ok()
to setattr_prepare() to better relect that it does also some
modifications in addition to checks.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
When file permissions are modified via chmod(2) and the user is not in
the owning group or capable of CAP_FSETID, the setgid bit is cleared in
inode_change_ok(). Setting a POSIX ACL via setxattr(2) sets the file
permissions as well as the new ACL, but doesn't clear the setgid bit in
a similar way; this allows to bypass the check in chmod(2). Fix that.
References: CVE-2016-7097
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
If the subvol/snapshot create/destroy ioctls are passed a regular file
with execute permissions set, we'll eventually Oops while trying to do
inode->i_op->lookup via lookup_one_len.
This patch ensures that the file descriptor refers to a directory.
Fixes: cb8e70901d (Btrfs: Fix subvolume creation locking rules)
Fixes: 76dda93c6a (Btrfs: add snapshot/subvolume destroy ioctl)
Cc: <stable@vger.kernel.org> #v2.6.29+
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
btrfs/022 was spitting a warning for the case that we exceed the quota. If we
fail to make our quota reservation we need to clean up our data space
reservation. Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Tested-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
Introduce the bio_flags() macro. Ensure that the second argument of
bio_set_op_attrs() only contains flags and no operation. This patch
does not change any functionality.
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Cc: Mike Christie <mchristi@redhat.com>
Cc: Chris Mason <clm@fb.com> (maintainer:BTRFS FILE SYSTEM)
Cc: Josef Bacik <jbacik@fb.com> (maintainer:BTRFS FILE SYSTEM)
Cc: Mike Snitzer <snitzer@redhat.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Damien Le Moal <damien.lemoal@hgst.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
Pull btrfs fixes from Chris Mason:
"I'm not proud of how long it took me to track down that one liner in
btrfs_sync_log(), but the good news is the patches I was trying to
blame for these problems were actually fine (sorry Filipe)"
* 'for-linus-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
btrfs: introduce tickets_id to determine whether asynchronous metadata reclaim work makes progress
btrfs: remove root_log_ctx from ctx list before btrfs_sync_log returns
btrfs: do not decrease bytes_may_use when replaying extents
In btrfs_async_reclaim_metadata_space(), we use ticket's address to
determine whether asynchronous metadata reclaim work is making progress.
ticket = list_first_entry(&space_info->tickets,
struct reserve_ticket, list);
if (last_ticket == ticket) {
flush_state++;
} else {
last_ticket = ticket;
flush_state = FLUSH_DELAYED_ITEMS_NR;
if (commit_cycles)
commit_cycles--;
}
But indeed it's wrong, we should not rely on local variable's address to
do this check, because addresses may be same. In my test environment, I
dd one 168MB file in a 256MB fs, found that for this file, every time
wait_reserve_ticket() called, local variable ticket's address is same,
For above codes, assume a previous ticket's address is addrA, last_ticket
is addrA. Btrfs_async_reclaim_metadata_space() finished this ticket and
wake up it, then another ticket is added, but with the same address addrA,
now last_ticket will be same to current ticket, then current ticket's flush
work will start from current flush_state, not initial FLUSH_DELAYED_ITEMS_NR,
which may result in some enospc issues(I have seen this in my test machine).
Signed-off-by: Wang Xiaoguang <wangxg.fnst@cn.fujitsu.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We use a btrfs_log_ctx structure to pass information into the
tree log commit, and get error values out. It gets added to a per
log-transaction list which we walk when things go bad.
Commit d1433debe added an optimization to skip waiting for the log
commit, but didn't take root_log_ctx out of the list. This
patch makes sure we remove things before exiting.
Signed-off-by: Chris Mason <clm@fb.com>
Fixes: d1433debe7
cc: stable@vger.kernel.org # 3.15+
When replaying extents, there is no need to update bytes_may_use
in btrfs_alloc_logged_file_extent(), otherwise it'll trigger a
WARN_ON about bytes_may_use.
Fixes: ("btrfs: update btrfs_space_info's bytes_may_use timely")
Signed-off-by: Wang Xiaoguang <wangxg.fnst@cn.fujitsu.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Pull btrfs fixes from Chris Mason:
"I'm still prepping a set of fixes for btrfs fsync, just nailing down a
hard to trigger memory corruption. For now, these are tested and ready."
* 'for-linus-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
btrfs: fix one bug that process may endlessly wait for ticket in wait_reserve_ticket()
Btrfs: fix endless loop in balancing block groups
Btrfs: kill invalid ASSERT() in process_all_refs()
If can_overcommit() in btrfs_calc_reclaim_metadata_size() returns true,
btrfs_async_reclaim_metadata_space() will not reclaim metadata space, just
return directly and also forget to wake up process which are waiting for
their tickets, so these processes will wait endlessly.
Fstests case generic/172 with mount option "-o compress=lzo" have revealed
this bug in my test machine. Here if we have tickets to handle, we must
handle them first.
Signed-off-by: Wang Xiaoguang <wangxg.fnst@cn.fujitsu.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Qgroup function may overwrite the saved error 'err' with 0
in case quota is not enabled, and this ends up with a
endless loop in balance because we keep going back to balance
the same block group.
It really should use 'ret' instead.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Suppose you have the following tree in snap1 on a file system mounted with -o
inode_cache so that inode numbers are recycled
└── [ 258] a
└── [ 257] b
and then you remove b, rename a to c, and then re-create b in c so you have the
following tree
└── [ 258] c
└── [ 257] b
and then you try to do an incremental send you will hit
ASSERT(pending_move == 0);
in process_all_refs(). This is because we assume that any recycling of inodes
will not have a pending change in our path, which isn't the case. This is the
case for the DELETE side, since we want to remove the old file using the old
path, but on the create side we could have a pending move and need to do the
normal pending rename dance. So remove this ASSERT() and put a comment about
why we ignore pending_move. Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Pull btrfs fixes from Chris Mason:
"We've queued up a few different fixes in here. These range from
enospc corners to fsync and quota fixes, and a few targeted at error
handling for corrupt metadata/fuzzing"
* 'for-linus-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
Btrfs: fix lockdep warning on deadlock against an inode's log mutex
Btrfs: detect corruption when non-root leaf has zero item
Btrfs: check btree node's nritems
btrfs: don't create or leak aliased root while cleaning up orphans
Btrfs: fix em leak in find_first_block_group
btrfs: do not background blkdev_put()
Btrfs: clarify do_chunk_alloc()'s return value
btrfs: fix fsfreeze hang caused by delayed iputs deal
btrfs: update btrfs_space_info's bytes_may_use timely
btrfs: divide btrfs_update_reserved_bytes() into two functions
btrfs: use correct offset for reloc_inode in prealloc_file_extent_cluster()
btrfs: qgroup: Fix qgroup incorrectness caused by log replay
btrfs: relocation: Fix leaking qgroups numbers on data extents
btrfs: qgroup: Refactor btrfs_qgroup_insert_dirty_extent()
btrfs: waiting on qgroup rescan should not always be interruptible
btrfs: properly track when rescan worker is running
btrfs: flush_space: treat return value of do_chunk_alloc properly
Btrfs: add ASSERT for block group's memory leak
btrfs: backref: Fix soft lockup in __merge_refs function
Btrfs: fix memory leak of reloc_root
Commit 44f714dae5 ("Btrfs: improve performance on fsync against new
inode after rename/unlink"), which landed in 4.8-rc2, introduced a
possibility for a deadlock due to double locking of an inode's log mutex
by the same task, which lockdep reports with:
[23045.433975] =============================================
[23045.434748] [ INFO: possible recursive locking detected ]
[23045.435426] 4.7.0-rc6-btrfs-next-34+ #1 Not tainted
[23045.436044] ---------------------------------------------
[23045.436044] xfs_io/3688 is trying to acquire lock:
[23045.436044] (&ei->log_mutex){+.+...}, at: [<ffffffffa038552d>] btrfs_log_inode+0x13a/0xc95 [btrfs]
[23045.436044]
but task is already holding lock:
[23045.436044] (&ei->log_mutex){+.+...}, at: [<ffffffffa038552d>] btrfs_log_inode+0x13a/0xc95 [btrfs]
[23045.436044]
other info that might help us debug this:
[23045.436044] Possible unsafe locking scenario:
[23045.436044] CPU0
[23045.436044] ----
[23045.436044] lock(&ei->log_mutex);
[23045.436044] lock(&ei->log_mutex);
[23045.436044]
*** DEADLOCK ***
[23045.436044] May be due to missing lock nesting notation
[23045.436044] 3 locks held by xfs_io/3688:
[23045.436044] #0: (&sb->s_type->i_mutex_key#15){+.+...}, at: [<ffffffffa035f2ae>] btrfs_sync_file+0x14e/0x425 [btrfs]
[23045.436044] #1: (sb_internal#2){.+.+.+}, at: [<ffffffff8118446b>] __sb_start_write+0x5f/0xb0
[23045.436044] #2: (&ei->log_mutex){+.+...}, at: [<ffffffffa038552d>] btrfs_log_inode+0x13a/0xc95 [btrfs]
[23045.436044]
stack backtrace:
[23045.436044] CPU: 4 PID: 3688 Comm: xfs_io Not tainted 4.7.0-rc6-btrfs-next-34+ #1
[23045.436044] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.1-0-gb3ef39f-prebuilt.qemu-project.org 04/01/2014
[23045.436044] 0000000000000000 ffff88022f5f7860 ffffffff8127074d ffffffff82a54b70
[23045.436044] ffffffff82a54b70 ffff88022f5f7920 ffffffff81092897 ffff880228015d68
[23045.436044] 0000000000000000 ffffffff82a54b70 ffffffff829c3f00 ffff880228015d68
[23045.436044] Call Trace:
[23045.436044] [<ffffffff8127074d>] dump_stack+0x67/0x90
[23045.436044] [<ffffffff81092897>] __lock_acquire+0xcbb/0xe4e
[23045.436044] [<ffffffff8109155f>] ? mark_lock+0x24/0x201
[23045.436044] [<ffffffff8109179a>] ? mark_held_locks+0x5e/0x74
[23045.436044] [<ffffffff81092de0>] lock_acquire+0x12f/0x1c3
[23045.436044] [<ffffffff81092de0>] ? lock_acquire+0x12f/0x1c3
[23045.436044] [<ffffffffa038552d>] ? btrfs_log_inode+0x13a/0xc95 [btrfs]
[23045.436044] [<ffffffffa038552d>] ? btrfs_log_inode+0x13a/0xc95 [btrfs]
[23045.436044] [<ffffffff814a51a4>] mutex_lock_nested+0x77/0x3a7
[23045.436044] [<ffffffffa038552d>] ? btrfs_log_inode+0x13a/0xc95 [btrfs]
[23045.436044] [<ffffffffa039705e>] ? btrfs_release_delayed_node+0xb/0xd [btrfs]
[23045.436044] [<ffffffffa038552d>] btrfs_log_inode+0x13a/0xc95 [btrfs]
[23045.436044] [<ffffffffa038552d>] ? btrfs_log_inode+0x13a/0xc95 [btrfs]
[23045.436044] [<ffffffff810a0ed1>] ? vprintk_emit+0x453/0x465
[23045.436044] [<ffffffffa0385a61>] btrfs_log_inode+0x66e/0xc95 [btrfs]
[23045.436044] [<ffffffffa03c084d>] log_new_dir_dentries+0x26c/0x359 [btrfs]
[23045.436044] [<ffffffffa03865aa>] btrfs_log_inode_parent+0x4a6/0x628 [btrfs]
[23045.436044] [<ffffffffa0387552>] btrfs_log_dentry_safe+0x5a/0x75 [btrfs]
[23045.436044] [<ffffffffa035f464>] btrfs_sync_file+0x304/0x425 [btrfs]
[23045.436044] [<ffffffff811acaf4>] vfs_fsync_range+0x8c/0x9e
[23045.436044] [<ffffffff811acb22>] vfs_fsync+0x1c/0x1e
[23045.436044] [<ffffffff811acc79>] do_fsync+0x31/0x4a
[23045.436044] [<ffffffff811ace99>] SyS_fsync+0x10/0x14
[23045.436044] [<ffffffff814a88e5>] entry_SYSCALL_64_fastpath+0x18/0xa8
[23045.436044] [<ffffffff8108f039>] ? trace_hardirqs_off_caller+0x3f/0xaa
An example reproducer for this is:
$ mkfs.btrfs -f /dev/sdb
$ mount /dev/sdb /mnt
$ mkdir /mnt/dir
$ touch /mnt/dir/foo
$ sync
$ mv /mnt/dir/foo /mnt/dir/bar
$ touch /mnt/dir/foo
$ xfs_io -c "fsync" /mnt/dir/bar
This is because while logging the inode of file bar we end up logging its
parent directory (since its inode has an unlink_trans field matching the
current transaction id due to the rename operation), which in turn logs
the inodes for all its new dentries, so that the new inode for the new
file named foo gets logged which in turn triggered another logging attempt
for the inode we are fsync'ing, since that inode had an old name that
corresponds to the name of the new inode.
So fix this by ensuring that when logging the inode for a new dentry that
has a name matching an old name of some other inode, we don't log again
the original inode that we are fsync'ing.
Fixes: 44f714dae5 ("Btrfs: improve performance on fsync against new inode after rename/unlink")
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
Right now we treat leaf which has zero item as a valid one
because we could have an empty tree, that is, a root that is
also a leaf without any item, however, in the same case but
when the leaf is not a root, we can end up with hitting the
BUG_ON(1) in btrfs_extend_item() called by
setup_inline_extent_backref().
This makes us check the situation as a corruption if leaf is
not its own root.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
When btree node (level = 1) has nritems which equals to zero,
we can end up with panic due to insert_ptr()'s
BUG_ON(slot > nritems);
where slot is 1 and nritems is 0, as copy_for_split() calls
insert_ptr(.., path->slots[1] + 1, ...);
A invalid value results in the whole mess, this adds the check
for btree's node nritems so that we stop reading block when
when something is wrong.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
commit 909c3a22da (Btrfs: fix loading of orphan roots leading to BUG_ON)
avoids the BUG_ON but can add an aliased root to the dead_roots list or
leak the root.
Since we've already been loading roots into the radix tree, we should
use it before looking the root up on disk.
Cc: <stable@vger.kernel.org> # 4.5
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
We need to call free_extent_map() on the em we look up.
Signed-off-by: Josef Bacik <jbacik@fb.com>
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
At the end of unmount/dev-delete, if the device exclusive open is not
actually closed, then there might be a race with another program in
the userland who is trying to open the device in exclusive mode and
it may fail for eg:
unmount /btrfs; fsck /dev/x
btrfs dev del /dev/x /btrfs; fsck /dev/x
so here background blkdev_put() is not a choice
Signed-off-by: Anand Jain <Anand.Jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
Function start_transaction() can return ERR_PTR(1) when flush is
BTRFS_RESERVE_FLUSH_LIMIT, so the call graph is
start_transaction (return ERR_PTR(1))
-> btrfs_block_rsv_add (return 1)
-> reserve_metadata_bytes (return 1)
-> flush_space (return 1)
-> do_chunk_alloc (return 1)
With BTRFS_RESERVE_FLUSH_LIMIT, if flush_space is already on the
flush_state of ALLOC_CHUNK and it successfully allocates a new
chunk, then instead of trying to reserve space again,
reserve_metadata_bytes returns 1 immediately.
Eventually the callers who call start_transaction() usually just
do the IS_ERR() check which ERR_PTR(1) can pass, then it'll get
a panic when dereferencing a pointer which is ERR_PTR(1).
The following patch fixes the above problem.
"btrfs: flush_space: treat return value of do_chunk_alloc properly"
https://patchwork.kernel.org/patch/7778651/
This add comments to clarify do_chunk_alloc()'s return value.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
When running fstests generic/068, sometimes we got below deadlock:
xfs_io D ffff8800331dbb20 0 6697 6693 0x00000080
ffff8800331dbb20 ffff88007acfc140 ffff880034d895c0 ffff8800331dc000
ffff880032d243e8 fffffffeffffffff ffff880032d24400 0000000000000001
ffff8800331dbb38 ffffffff816a9045 ffff880034d895c0 ffff8800331dbba8
Call Trace:
[<ffffffff816a9045>] schedule+0x35/0x80
[<ffffffff816abab2>] rwsem_down_read_failed+0xf2/0x140
[<ffffffff8118f5e1>] ? __filemap_fdatawrite_range+0xd1/0x100
[<ffffffff8134f978>] call_rwsem_down_read_failed+0x18/0x30
[<ffffffffa06631fc>] ? btrfs_alloc_block_rsv+0x2c/0xb0 [btrfs]
[<ffffffff810d32b5>] percpu_down_read+0x35/0x50
[<ffffffff81217dfc>] __sb_start_write+0x2c/0x40
[<ffffffffa067f5d5>] start_transaction+0x2a5/0x4d0 [btrfs]
[<ffffffffa067f857>] btrfs_join_transaction+0x17/0x20 [btrfs]
[<ffffffffa068ba34>] btrfs_evict_inode+0x3c4/0x5d0 [btrfs]
[<ffffffff81230a1a>] evict+0xba/0x1a0
[<ffffffff812316b6>] iput+0x196/0x200
[<ffffffffa06851d0>] btrfs_run_delayed_iputs+0x70/0xc0 [btrfs]
[<ffffffffa067f1d8>] btrfs_commit_transaction+0x928/0xa80 [btrfs]
[<ffffffffa0646df0>] btrfs_freeze+0x30/0x40 [btrfs]
[<ffffffff81218040>] freeze_super+0xf0/0x190
[<ffffffff81229275>] do_vfs_ioctl+0x4a5/0x5c0
[<ffffffff81003176>] ? do_audit_syscall_entry+0x66/0x70
[<ffffffff810038cf>] ? syscall_trace_enter_phase1+0x11f/0x140
[<ffffffff81229409>] SyS_ioctl+0x79/0x90
[<ffffffff81003c12>] do_syscall_64+0x62/0x110
[<ffffffff816acbe1>] entry_SYSCALL64_slow_path+0x25/0x25
>From this warning, freeze_super() already holds SB_FREEZE_FS, but
btrfs_freeze() will call btrfs_commit_transaction() again, if
btrfs_commit_transaction() finds that it has delayed iputs to handle,
it'll start_transaction(), which will try to get SB_FREEZE_FS lock
again, then deadlock occurs.
The root cause is that in btrfs, sync_filesystem(sb) does not make
sure all metadata is updated. There still maybe some codes adding
delayed iputs, see below sample race window:
CPU1 | CPU2
|-> freeze_super() |
|-> sync_filesystem(sb); |
| |-> cleaner_kthread()
| | |-> btrfs_delete_unused_bgs()
| | |-> btrfs_remove_chunk()
| | |-> btrfs_remove_block_group()
| | |-> btrfs_add_delayed_iput()
| |
|-> sb->s_writers.frozen = SB_FREEZE_FS; |
|-> sb_wait_write(sb, SB_FREEZE_FS); |
| acquire SB_FREEZE_FS lock. |
| |
|-> btrfs_freeze() |
|-> btrfs_commit_transaction() |
|-> btrfs_run_delayed_iputs() |
| will handle delayed iputs, |
| that means start_transaction() |
| will be called, which will try |
| to get SB_FREEZE_FS lock. |
To fix this issue, introduce a "int fs_frozen" to record internally whether
fs has been frozen. If fs has been frozen, we can not handle delayed iputs.
Signed-off-by: Wang Xiaoguang <wangxg.fnst@cn.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ add comment to btrfs_freeze ]
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
This patch can fix some false ENOSPC errors, below test script can
reproduce one false ENOSPC error:
#!/bin/bash
dd if=/dev/zero of=fs.img bs=$((1024*1024)) count=128
dev=$(losetup --show -f fs.img)
mkfs.btrfs -f -M $dev
mkdir /tmp/mntpoint
mount $dev /tmp/mntpoint
cd /tmp/mntpoint
xfs_io -f -c "falloc 0 $((64*1024*1024))" testfile
Above script will fail for ENOSPC reason, but indeed fs still has free
space to satisfy this request. Please see call graph:
btrfs_fallocate()
|-> btrfs_alloc_data_chunk_ondemand()
| bytes_may_use += 64M
|-> btrfs_prealloc_file_range()
|-> btrfs_reserve_extent()
|-> btrfs_add_reserved_bytes()
| alloc_type is RESERVE_ALLOC_NO_ACCOUNT, so it does not
| change bytes_may_use, and bytes_reserved += 64M. Now
| bytes_may_use + bytes_reserved == 128M, which is greater
| than btrfs_space_info's total_bytes, false enospc occurs.
| Note, the bytes_may_use decrease operation will be done in
| end of btrfs_fallocate(), which is too late.
Here is another simple case for buffered write:
CPU 1 | CPU 2
|
|-> cow_file_range() |-> __btrfs_buffered_write()
|-> btrfs_reserve_extent() | |
| | |
| | |
| ..... | |-> btrfs_check_data_free_space()
| |
| |
|-> extent_clear_unlock_delalloc() |
In CPU 1, btrfs_reserve_extent()->find_free_extent()->
btrfs_add_reserved_bytes() do not decrease bytes_may_use, the decrease
operation will be delayed to be done in extent_clear_unlock_delalloc().
Assume in this case, btrfs_reserve_extent() reserved 128MB data, CPU2's
btrfs_check_data_free_space() tries to reserve 100MB data space.
If
100MB > data_sinfo->total_bytes - data_sinfo->bytes_used -
data_sinfo->bytes_reserved - data_sinfo->bytes_pinned -
data_sinfo->bytes_readonly - data_sinfo->bytes_may_use
btrfs_check_data_free_space() will try to allcate new data chunk or call
btrfs_start_delalloc_roots(), or commit current transaction in order to
reserve some free space, obviously a lot of work. But indeed it's not
necessary as long as decreasing bytes_may_use timely, we still have
free space, decreasing 128M from bytes_may_use.
To fix this issue, this patch chooses to update bytes_may_use for both
data and metadata in btrfs_add_reserved_bytes(). For compress path, real
extent length may not be equal to file content length, so introduce a
ram_bytes argument for btrfs_reserve_extent(), find_free_extent() and
btrfs_add_reserved_bytes(), it's becasue bytes_may_use is increased by
file content length. Then compress path can update bytes_may_use
correctly. Also now we can discard RESERVE_ALLOC_NO_ACCOUNT, RESERVE_ALLOC
and RESERVE_FREE.
As we know, usually EXTENT_DO_ACCOUNTING is used for error path. In
run_delalloc_nocow(), for inode marked as NODATACOW or extent marked as
PREALLOC, we also need to update bytes_may_use, but can not pass
EXTENT_DO_ACCOUNTING, because it also clears metadata reservation, so
here we introduce EXTENT_CLEAR_DATA_RESV flag to indicate btrfs_clear_bit_hook()
to update btrfs_space_info's bytes_may_use.
Meanwhile __btrfs_prealloc_file_range() will call
btrfs_free_reserved_data_space() internally for both sucessful and failed
path, btrfs_prealloc_file_range()'s callers does not need to call
btrfs_free_reserved_data_space() any more.
Signed-off-by: Wang Xiaoguang <wangxg.fnst@cn.fujitsu.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
This patch divides btrfs_update_reserved_bytes() into
btrfs_add_reserved_bytes() and btrfs_free_reserved_bytes(), and
next patch will extend btrfs_add_reserved_bytes（）to fix some
false ENOSPC error, please see later patch for detailed info.
Signed-off-by: Wang Xiaoguang <wangxg.fnst@cn.fujitsu.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
In prealloc_file_extent_cluster(), btrfs_check_data_free_space() uses
wrong file offset for reloc_inode, it uses cluster->start and cluster->end,
which indeed are extent's bytenr. The correct value should be
cluster->[start|end] minus block group's start bytenr.
start bytenr cluster->start
| | extent | extent | ...| extent |
|----------------------------------------------------------------|
| block group reloc_inode |
Signed-off-by: Wang Xiaoguang <wangxg.fnst@cn.fujitsu.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
When doing log replay at mount time(after power loss), qgroup will leak
numbers of replayed data extents.
The cause is almost the same of balance.
So fix it by manually informing qgroup for owner changed extents.
The bug can be detected by btrfs/119 test case.
Cc: Mark Fasheh <mfasheh@suse.de>
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Reviewed-and-Tested-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
This patch fixes a REGRESSION introduced in 4.2, caused by the big quota
rework.
When balancing data extents, qgroup will leak all its numbers for
relocated data extents.
The relocation is done in the following steps for data extents:
1) Create data reloc tree and inode
2) Copy all data extents to data reloc tree
And commit transaction
3) Create tree reloc tree(special snapshot) for any related subvolumes
4) Replace file extent in tree reloc tree with new extents in data reloc
tree
And commit transaction
5) Merge tree reloc tree with original fs, by swapping tree blocks
For 1)~4), since tree reloc tree and data reloc tree doesn't count to
qgroup, everything is OK.
But for 5), the swapping of tree blocks will only info qgroup to track
metadata extents.
If metadata extents contain file extents, qgroup number for file extents
will get lost, leading to corrupted qgroup accounting.
The fix is, before commit transaction of step 5), manually info qgroup to
track all file extents in data reloc tree.
Since at commit transaction time, the tree swapping is done, and qgroup
will account these data extents correctly.
Cc: Mark Fasheh <mfasheh@suse.de>
Reported-by: Mark Fasheh <mfasheh@suse.de>
Reported-by: Filipe Manana <fdmanana@gmail.com>
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Tested-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
Refactor btrfs_qgroup_insert_dirty_extent() function, to two functions:
1. btrfs_qgroup_insert_dirty_extent_nolock()
Almost the same with original code.
For delayed_ref usage, which has delayed refs locked.
Change the return value type to int, since caller never needs the
pointer, but only needs to know if they need to free the allocated
memory.
2. btrfs_qgroup_insert_dirty_extent()
The more encapsulated version.
Will do the delayed_refs lock, memory allocation, quota enabled check
and other things.
The original design is to keep exported functions to minimal, but since
more btrfs hacks exposed, like replacing path in balance, we need to
record dirty extents manually, so we have to add such functions.
Also, add comment for both functions, to info developers how to keep
qgroup correct when doing hacks.
Cc: Mark Fasheh <mfasheh@suse.de>
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Reviewed-and-Tested-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
We wait on qgroup rescan completion in three places: file system
shutdown, the quota disable ioctl, and the rescan wait ioctl. If the
user sends a signal while we're waiting, we continue happily along. This
is expected behavior for the rescan wait ioctl. It's racy in the shutdown
path but mostly works due to other unrelated synchronization points.
In the quota disable path, it Oopses the kernel pretty much immediately.
Cc: <stable@vger.kernel.org> # v4.4+
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
The qgroup_flags field is overloaded such that it reflects the on-disk
status of qgroups and the runtime state. The BTRFS_QGROUP_STATUS_FLAG_RESCAN
flag is used to indicate that a rescan operation is in progress, but if
the file system is unmounted while a rescan is running, the rescan
operation is paused. If the file system is then mounted read-only,
the flag will still be present but the rescan operation will not have
been resumed. When we go to umount, btrfs_qgroup_wait_for_completion
will see the flag and interpret it to mean that the rescan worker is
still running and will wait for a completion that will never come.
This patch uses a separate flag to indicate when the worker is
running. The locking and state surrounding the qgroup rescan worker
needs a lot of attention beyond this patch but this is enough to
avoid a hung umount.
Cc: <stable@vger.kernel.org> # v4.4+
Signed-off-by; Jeff Mahoney <jeffm@suse.com>
Reviewed-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
do_chunk_alloc returns 1 when it succeeds to allocate a new chunk.
But flush_space will not convert this to 0, and will also return 1.
As a result, reserve_metadata_bytes will think that flush_space failed,
and may potentially return this value "1" to the caller (depends how
reserve_metadata_bytes was called). The caller will also treat this as an error.
For example, btrfs_block_rsv_refill does:
int ret = -ENOSPC;
...
ret = reserve_metadata_bytes(root, block_rsv, num_bytes, flush);
if (!ret) {
block_rsv_add_bytes(block_rsv, num_bytes, 0);
return 0;
}
return ret;
So it will return -ENOSPC.
Signed-off-by: Alex Lyakas <alex@zadarastorage.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
This adds several ASSERT()' s to report memory leak of block group cache.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
When over 1000 file extents refers to one extent, find_parent_nodes()
will be obviously slow, due to the O(n^2)~O(n^3) loops inside
__merge_refs().
The following ftrace shows the cubic growth of execution time:
256 refs
5) + 91.768 us | __add_keyed_refs.isra.12 [btrfs]();
5) 1.447 us | __add_missing_keys.isra.13 [btrfs]();
5) ! 114.544 us | __merge_refs [btrfs]();
5) ! 136.399 us | __merge_refs [btrfs]();
512 refs
6) ! 279.859 us | __add_keyed_refs.isra.12 [btrfs]();
6) 3.164 us | __add_missing_keys.isra.13 [btrfs]();
6) ! 442.498 us | __merge_refs [btrfs]();
6) # 2091.073 us | __merge_refs [btrfs]();
and 1024 refs
7) ! 368.683 us | __add_keyed_refs.isra.12 [btrfs]();
7) 4.810 us | __add_missing_keys.isra.13 [btrfs]();
7) # 2043.428 us | __merge_refs [btrfs]();
7) * 18964.23 us | __merge_refs [btrfs]();
And sort them into the following char:
(Unit: us)
------------------------------------------------------------------------
Trace function | 256 ref | 512 refs | 1024 refs |
------------------------------------------------------------------------
__add_keyed_refs | 91 | 249 | 368 |
__add_missing_keys | 1 | 3 | 4 |
__merge_refs 1st call | 114 | 442 | 2043 |
__merge_refs 2nd call | 136 | 2091 | 18964 |
------------------------------------------------------------------------
We can see the that __add_keyed_refs() grows almost in linear behavior.
And __add_missing_keys() in this case doesn't change much or takes much
time.
While for the 1st __merge_refs() it's square growth
for the 2nd __merge_refs() call it's cubic growth.
It's no doubt that merge_refs() will take a long long time to execute if
the number of refs continues its grows.
So add a cond_resced() into the loop of __merge_refs().
Although this will solve the problem of soft lockup, we need to use the
new rb_tree based structure introduced by Lu Fengqi to really solve the
long execution time.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
When some critical errors occur and FS would be flipped into RO,
if we have an on-going balance, we can end up with a memory leak
of root->reloc_root since btrfs_drop_snapshots() bails out
without freeing reloc_root at the very early start.
However, we're not able to free reloc_root in btrfs_drop_snapshots()
because its caller, merge_reloc_roots(), still needs to access it to
cleanup reloc_root's rbtree.
This makes us free reloc_root when we're going to free fs/file roots.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
Pull btrfs fixes from Chris Mason:
"Some fixes for btrfs send/recv and fsync from Filipe and Robbie Ko.
Bonus points to Filipe for already having xfstests in place for many
of these"
* 'for-linus-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
Btrfs: remove unused function btrfs_add_delayed_qgroup_reserve()
Btrfs: improve performance on fsync against new inode after rename/unlink
Btrfs: be more precise on errors when getting an inode from disk
Btrfs: send, don't bug on inconsistent snapshots
Btrfs: send, avoid incorrect leaf accesses when sending utimes operations
Btrfs: send, fix invalid leaf accesses due to incorrect utimes operations
Btrfs: send, fix warning due to late freeing of orphan_dir_info structures
Btrfs: incremental send, fix premature rmdir operations
Btrfs: incremental send, fix invalid paths for rename operations
Btrfs: send, add missing error check for calls to path_loop()
Btrfs: send, fix failure to move directories with the same name around
Btrfs: add missing check for writeback errors on fsync
Since commit 63a4cc2486, bio->bi_rw contains flags in the lower
portion and the op code in the higher portions. This means that
old code that relies on manually setting bi_rw is most likely
going to be broken. Instead of letting that brokeness linger,
rename the member, to force old and out-of-tree code to break
at compile time instead of at runtime.
No intended functional changes in this commit.
Signed-off-by: Jens Axboe <axboe@fb.com>
Pull block fixes from Jens Axboe:
"Here's the second round of block updates for this merge window.
It's a mix of fixes for changes that went in previously in this round,
and fixes in general. This pull request contains:
- Fixes for loop from Christoph
- A bdi vs gendisk lifetime fix from Dan, worth two cookies.
- A blk-mq timeout fix, when on frozen queues. From Gabriel.
- Writeback fix from Jan, ensuring that __writeback_single_inode()
does the right thing.
- Fix for bio->bi_rw usage in f2fs from me.
- Error path deadlock fix in blk-mq sysfs registration from me.
- Floppy O_ACCMODE fix from Jiri.
- Fix to the new bio op methods from Mike.
One more followup will be coming here, ensuring that we don't
propagate the block types outside of block. That, and a rename of
bio->bi_rw is coming right after -rc1 is cut.
- Various little fixes"
* 'for-linus' of git://git.kernel.dk/linux-block:
mm/block: convert rw_page users to bio op use
loop: make do_req_filebacked more robust
loop: don't try to use AIO for discards
blk-mq: fix deadlock in blk_mq_register_disk() error path
Include: blkdev: Removed duplicate 'struct request;' declaration.
Fixup direct bi_rw modifiers
block: fix bdi vs gendisk lifetime mismatch
blk-mq: Allow timeouts to run while queue is freezing
nbd: fix race in ioctl
block: fix use-after-free in seq file
f2fs: drop bio->bi_rw manual assignment
block: add missing group association in bio-cloning functions
blkcg: kill unused field nr_undestroyed_grps
writeback: Write dirty times for WB_SYNC_ALL writeback
floppy: fix open(O_ACCMODE) for ioctl-only open
Pull more btrfs updates from Chris Mason:
"This is part two of my btrfs pull, which is some cleanups and a batch
of fixes.
Most of the code here is from Jeff Mahoney, making the pointers we
pass around internally more consistent and less confusing overall. I
noticed a small problem right before I sent this out yesterday, so I
fixed it up and re-tested overnight"
* 'for-linus-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: (40 commits)
Btrfs: fix __MAX_CSUM_ITEMS
btrfs: btrfs_abort_transaction, drop root parameter
btrfs: add btrfs_trans_handle->fs_info pointer
btrfs: btrfs_relocate_chunk pass extent_root to btrfs_end_transaction
btrfs: convert nodesize macros to static inlines
btrfs: introduce BTRFS_MAX_ITEM_SIZE
btrfs: cleanup, remove prototype for btrfs_find_root_ref
btrfs: copy_to_sk drop unused root parameter
btrfs: simpilify btrfs_subvol_inherit_props
btrfs: tests, use BTRFS_FS_STATE_DUMMY_FS_INFO instead of dummy root
btrfs: tests, require fs_info for root
btrfs: tests, move initialization into tests/
btrfs: btrfs_test_opt and friends should take a btrfs_fs_info
btrfs: prefix fsid to all trace events
btrfs: plumb fs_info into btrfs_work
btrfs: remove obsolete part of comment in statfs
btrfs: hide test-only member under ifdef
btrfs: Ratelimit "no csum found" info message
btrfs: Add ratelimit to btrfs printing
Btrfs: fix unexpected balance crash due to BUG_ON
...
bi_rw should be using bio_set_op_attrs to set bi_rw.
Signed-off-by: Shaun Tancheff <shaun@tancheff.com>
Cc: Chris Mason <clm@fb.com>
Cc: Josef Bacik <jbacik@fb.com>
Cc: David Sterba <dsterba@suse.com>
Cc: Mike Christie <mchristi@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
When a bio is cloned, the newly created bio must be associated with
the same blkcg as the original bio (if BLK_CGROUP is enabled). If
this operation is not performed, then the new bio is not associated
with any group, and the group of the current task is returned when
the group of the bio is requested.
Depending on the cloning frequency, this may cause a large
percentage of the bios belonging to a given group to be treated
as if belonging to other groups (in most cases as if belonging to
the root group). The expected group isolation may thereby be broken.
This commit adds the missing association in bio-cloning functions.
Fixes: da2f0f74cf ("Btrfs: add support for blkio controllers")
Cc: stable@vger.kernel.org # v4.3+
Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Reviewed-by: Nikolay Borisov <kernel@kyup.com>
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@fb.com>
Jeff Mahoney's cleanup commit (14a1e067b4) wasn't correct for csums on
machines where the pagesize >= metadata blocksize.
This just reverts the relevant hunks to bring the old math back.
Signed-off-by: Chris Mason <clm@fb.com>
No longer used as of commit 5846a3c268 ("btrfs: qgroup: Fix a race in
delayed_ref which leads to abort trans").
Signed-off-by: Filipe Manana <fdmanana@suse.com>
With commit 56f23fdbb6 ("Btrfs: fix file/data loss caused by fsync after
rename and new inode") we got simple fix for a functional issue when the
following sequence of actions is done:
at transaction N
create file A at directory D
at transaction N + M (where M >= 1)
move/rename existing file A from directory D to directory E
create a new file named A at directory D
fsync the new file
power fail
The solution was to simply detect such scenario and fallback to a full
transaction commit when we detect it. However this turned out to had a
significant impact on throughput (and a bit on latency too) for benchmarks
using the dbench tool, which simulates real workloads from smbd (Samba)
servers. For example on a test vm (with a debug kernel):
Unpatched:
Throughput 19.1572 MB/sec 32 clients 32 procs max_latency=1005.229 ms
Patched:
Throughput 23.7015 MB/sec 32 clients 32 procs max_latency=809.206 ms
The patched results (this patch is applied) are similar to the results of
a kernel with the commit 56f23fdbb6 ("Btrfs: fix file/data loss caused
by fsync after rename and new inode") reverted.
This change avoids the fallback to a transaction commit and instead makes
sure all the names of the conflicting inode (the one that had a name in a
past transaction that matches the name of the new file in the same parent
directory) are logged so that at log replay time we don't lose neither the
new file nor the old file, and the old file gets the name it was renamed
to.
This also ends up avoiding a full transaction commit for a similar case
that involves an unlink instead of a rename of the old file:
at transaction N
create file A at directory D
at transaction N + M (where M >= 1)
remove file A
create a new file named A at directory D
fsync the new file
power fail
Signed-off-by: Filipe Manana <fdmanana@suse.com>
When we attempt to read an inode from disk, we end up always returning an
-ESTALE error to the caller regardless of the actual failure reason, which
can be an out of memory problem (when allocating a path), some error found
when reading from the fs/subvolume btree (like a genuine IO error) or the
inode does not exists. So lets start returning the real error code to the
callers so that they don't treat all -ESTALE errors as meaning that the
inode does not exists (such as during orphan cleanup). This will also be
needed for a subsequent patch in the same series dealing with a special
fsync case.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
When doing an incremental send, if we find a new/modified/deleted extent,
reference or xattr without having previously processed the corresponding
inode item we end up exexuting a BUG_ON(). This is because whenever an
extent, xattr or reference is added, modified or deleted, we always expect
to have the corresponding inode item updated. However there are situations
where this will not happen due to transient -ENOMEM or -ENOSPC errors when
doing delayed inode updates.
For example, when punching holes we can succeed in deleting and modifying
(shrinking) extents but later fail to do the delayed inode update. So after
such failure we close our transaction handle and right after a snapshot of
the fs/subvol tree can be made and used later for a send operation. The
same thing can happen during truncate, link, unlink, and xattr related
operations.
So instead of executing a BUG_ON, make send return an -EIO error and print
an informative error message do dmesg/syslog.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
The caller of send_utimes() is supposed to be sure that the inode number
it passes to this function does actually exists in the send snapshot.
However due to logic/algorithm bugs (such as the one fixed by the patch
titled "Btrfs: send, fix invalid leaf accesses due to incorrect utimes
operations"), this might not be the case and when that happens it makes
send_utimes() access use an unrelated leaf item as the target inode item
or access beyond a leaf's boundaries (when the leaf is full and
path->slots[0] matches the number of items in the leaf).
So if the call to btrfs_search_slot() done by send_utimes() does not find
the inode item, just make sure send_utimes() returns -ENOENT and does not
silently accesses unrelated leaf items or does invalid leaf accesses, also
allowing us to easialy and deterministically catch such algorithmic/logic
bugs.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
During an incremental send, if we have delayed rename operations for inodes
that were children of directories which were removed in the send snapshot,
we can end up accessing incorrect items in a leaf or accessing beyond the
last item of the leaf due to issuing utimes operations for the removed
inodes. Consider the following example:
Parent snapshot:
. (ino 256)
|--- a/ (ino 257)
| |--- c/ (ino 262)
|
|--- b/ (ino 258)
| |--- d/ (ino 263)
|
|--- del/ (ino 261)
|--- x/ (ino 259)
|--- y/ (ino 260)
Send snapshot:
. (ino 256)
|--- a/ (ino 257)
|
|--- b/ (ino 258)
|
|--- c/ (ino 262)
| |--- y/ (ino 260)
|
|--- d/ (ino 263)
|--- x/ (ino 259)
1) When processing inodes 259 and 260, we end up delaying their rename
operations because their parents, inodes 263 and 262 respectively, were
not yet processed and therefore not yet renamed;
2) When processing inode 262, its rename operation is issued and right
after the rename operation for inode 260 is issued. However right after
issuing the rename operation for inode 260, at send.c:apply_dir_move(),
we issue utimes operations for all current and past parents of inode
260. This means we try to send a utimes operation for its old parent,
inode 261 (deleted in the send snapshot), which does not cause any
immediate and deterministic failure, because when the target inode is
not found in the send snapshot, the send.c:send_utimes() function
ignores it and uses the leaf region pointed to by path->slots[0],
which can be any unrelated item (belonging to other inode) or it can
be a region outside the leaf boundaries, if the leaf is full and
path->slots[0] matches the number of items in the leaf. So we end
up either successfully sending a utimes operation, which is fine
and irrelevant because the old parent (inode 261) will end up being
deleted later, or we end up doing an invalid memory access tha
crashes the kernel.
So fix this by making apply_dir_move() issue utimes operations only for
parents that still exist in the send snapshot. In a separate patch we
will make send_utimes() return an error (-ENOENT) if the given inode
does not exists in the send snapshot.
Signed-off-by: Robbie Ko <robbieko@synology.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
[Rewrote change log to be more detailed and better organized]
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Under certain situations, when doing an incremental send, we can end up
not freeing orphan_dir_info structures as soon as they are no longer
needed. Instead we end up freeing them only after finishing the send
stream, which causes a warning to be emitted:
[282735.229200] ------------[ cut here ]------------
[282735.229968] WARNING: CPU: 9 PID: 10588 at fs/btrfs/send.c:6298 btrfs_ioctl_send+0xe2f/0xe51 [btrfs]
[282735.231282] Modules linked in: btrfs crc32c_generic xor raid6_pq acpi_cpufreq tpm_tis ppdev tpm parport_pc psmouse parport sg pcspkr i2c_piix4 i2c_core evdev processor serio_raw button loop autofs4 ext4 crc16 jbd2 mbcache sr_mod cdrom sd_mod ata_generic virtio_scsi ata_piix libata virtio_pci virtio_ring virtio e1000 scsi_mod floppy [last unloaded: btrfs]
[282735.237130] CPU: 9 PID: 10588 Comm: btrfs Tainted: G W 4.6.0-rc7-btrfs-next-31+ #1
[282735.239309] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS by qemu-project.org 04/01/2014
[282735.240160] 0000000000000000 ffff880224273ca8 ffffffff8126b42c 0000000000000000
[282735.240160] 0000000000000000 ffff880224273ce8 ffffffff81052b14 0000189a24273ac8
[282735.240160] ffff8802210c9800 0000000000000000 0000000000000001 0000000000000000
[282735.240160] Call Trace:
[282735.240160] [<ffffffff8126b42c>] dump_stack+0x67/0x90
[282735.240160] [<ffffffff81052b14>] __warn+0xc2/0xdd
[282735.240160] [<ffffffff81052beb>] warn_slowpath_null+0x1d/0x1f
[282735.240160] [<ffffffffa03c99d5>] btrfs_ioctl_send+0xe2f/0xe51 [btrfs]
[282735.240160] [<ffffffffa0398358>] btrfs_ioctl+0x14f/0x1f81 [btrfs]
[282735.240160] [<ffffffff8108e456>] ? arch_local_irq_save+0x9/0xc
[282735.240160] [<ffffffff8118da05>] vfs_ioctl+0x18/0x34
[282735.240160] [<ffffffff8118e00c>] do_vfs_ioctl+0x550/0x5be
[282735.240160] [<ffffffff81196f0c>] ? __fget+0x6b/0x77
[282735.240160] [<ffffffff81196fa1>] ? __fget_light+0x62/0x71
[282735.240160] [<ffffffff8118e0d1>] SyS_ioctl+0x57/0x79
[282735.240160] [<ffffffff8149e025>] entry_SYSCALL_64_fastpath+0x18/0xa8
[282735.240160] [<ffffffff81100c6b>] ? time_hardirqs_off+0x9/0x14
[282735.240160] [<ffffffff8108e87d>] ? trace_hardirqs_off_caller+0x1f/0xaa
[282735.256343] ---[ end trace a4539270c8056f93 ]---
Consider the following example:
Parent snapshot:
. (ino 256)
|--- a/ (ino 257)
| |--- c/ (ino 260)
|
|--- del/ (ino 259)
|--- tmp/ (ino 258)
|--- x/ (ino 261)
|--- y/ (ino 262)
Send snapshot:
. (ino 256)
|--- a/ (ino 257)
| |--- x/ (ino 261)
| |--- y/ (ino 262)
|
|--- c/ (ino 260)
|--- tmp/ (ino 258)
1) When processing inode 258, we end up delaying its rename operation
because it has an ancestor (in the send snapshot) that has a higher
inode number (inode 260) which was also renamed in the send snapshot,
therefore we delay the rename of inode 258 so that it happens after
inode 260 is renamed;
2) When processing inode 259, we end up delaying its deletion (rmdir
operation) because it has a child inode (258) that has its rename
operation delayed. At this point we allocate an orphan_dir_info
structure and tag inode 258 so that we later attempt to see if we
can delete (rmdir) inode 259 once inode 258 is renamed;
3) When we process inode 260, after renaming it we finally do the rename
operation for inode 258. Once we issue the rename operation for inode
258 we notice that this inode was tagged so that we attempt to see
if at this point we can delete (rmdir) inode 259. But at this point
we can not still delete inode 259 because it has 2 children, inodes
261 and 262, that were not yet processed and therefore not yet
moved (renamed) away from inode 259. We end up not freeing the
orphan_dir_info structure allocated in step 2;
4) We process inodes 261 and 262, and once we move/rename inode 262
we issue the rmdir operation for inode 260;
5) We finish the send stream and notice that red black tree that
contains orphan_dir_info structures is not empty, so we emit
a warning and then free any orphan_dir_structures left.
So fix this by freeing an orphan_dir_info structure once we try to
apply a pending rename operation if we can not delete yet the tagged
directory.
A test case for fstests follows soon.
Signed-off-by: Robbie Ko <robbieko@synology.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
[Modified changelog to be more detailed and easier to understand]
Under certain situations, an incremental send operation can contain
a rmdir operation that will make the receiving end fail when attempting
to execute it, because the target directory is not yet empty.
Consider the following example:
Parent snapshot:
. (ino 256)
|--- a/ (ino 257)
| |--- c/ (ino 260)
|
|--- del/ (ino 259)
|--- tmp/ (ino 258)
|--- x/ (ino 261)
Send snapshot:
. (ino 256)
|--- a/ (ino 257)
| |--- x/ (ino 261)
|
|--- c/ (ino 260)
|--- tmp/ (ino 258)
1) When processing inode 258, we delay its rename operation because inode
260 is its new parent in the send snapshot and it was not yet renamed
(since 260 > 258, that is, beyond the current progress);
2) When processing inode 259, we realize we can not yet send an rmdir
operation (against inode 259) because inode 258 was still not yet
renamed/moved away from inode 259. Therefore we update data structures
so that after inode 258 is renamed, we try again to see if we can
finally send an rmdir operation for inode 259;
3) When we process inode 260, we send a rename operation for it followed
by a rename operation for inode 258. Once we send the rename operation
for inode 258 we then check if we can finally issue an rmdir for its
previous parent, inode 259, by calling the can_rmdir() function with
a value of sctx->cur_ino + 1 (260 + 1 = 261) for its "progress"
argument. This makes can_rmdir() return true (value 1) because even
though there's still a child inode of inode 259 that was not yet
renamed/moved, which is inode 261, the given value of progress (261)
is not lower then 261 (that is, not lower than the inode number of
some child of inode 259). So we end up sending a rmdir operation for
inode 259 before its child inode 261 is processed and renamed.
So fix this by passing the correct progress value to the call to
can_rmdir() from within apply_dir_move() (where we issue delayed rename
operations), which should match stcx->cur_ino (the number of the inode
currently being processed) and not sctx->cur_ino + 1.
A test case for fstests follows soon.
Signed-off-by: Robbie Ko <robbieko@synology.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
[Rewrote change log to be more detailed, clear and well formatted]
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Example scenario:
Parent snapshot:
. (ino 277)
|---- tmp/ (ino 278)
|---- pre/ (ino 280)
| |---- wait_dir/ (ino 281)
|
|---- desc/ (ino 282)
|---- ance/ (ino 283)
| |---- below_ance/ (ino 279)
|
|---- other_dir/ (ino 284)
Send snapshot:
. (ino 277)
|---- tmp/ (ino 278)
|---- other_dir/ (ino 284)
|---- below_ance/ (ino 279)
| |---- pre/ (ino 280)
|
|---- wait_dir/ (ino 281)
|---- desc/ (ino 282)
|---- ance/ (ino 283)
While computing the send stream the following steps happen:
1) While processing inode 279 we end up delaying its rename operation
because its new parent in the send snapshot, inode 284, was not
yet processed and therefore not yet renamed;
2) Later when processing inode 280 we end up renaming it immediately to
"ance/below_once/pre" and not delay its rename operation because its
new parent (inode 279 in the send snapshot) has its rename operation
delayed and inode 280 is not an encestor of inode 279 (its parent in
the send snapshot) in the parent snapshot;
3) When processing inode 281 we end up delaying its rename operation
because its new parent in the send snapshot, inode 284, was not yet
processed and therefore not yet renamed;
4) When processing inode 282 we do not delay its rename operation because
its parent in the send snapshot, inode 281, already has its own rename
operation delayed and our current inode (282) is not an ancestor of
inode 281 in the parent snapshot. Therefore inode 282 is renamed to
"ance/below_ance/pre/wait_dir";
5) When processing inode 283 we realize that we can rename it because one
of its ancestors in the send snapshot, inode 281, has its rename
operation delayed and inode 283 is not an ancestor of inode 281 in the
parent snapshot. So a rename operation to rename inode 283 to
"ance/below_ance/pre/wait_dir/desc/ance" is issued. This path is
invalid due to a missing path building loop that was undetected by
the incremental send implementation, as inode 283 ends up getting
included twice in the path (once with its path in the parent snapshot).
Therefore its rename operation must wait before the ancestor inode 284
is renamed.
Fix this by not terminating the rename dependency checks when we find an
ancestor, in the send snapshot, that has its rename operation delayed. So
that we continue doing the same checks if the current inode is not an
ancestor, in the parent snapshot, of an ancestor in the send snapshot we
are processing in the loop.
The problem and reproducer were reported by Robbie Ko, as part of a patch
titled "Btrfs: incremental send, avoid ancestor rename to descendant".
However the fix was unnecessarily complicated and can be addressed with
much less code and effort.
Reported-by: Robbie Ko <robbieko@synology.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
The function path_loop() can return a negative integer, signaling an
error, 0 if there's no path loop and 1 if there's a path loop. We were
treating any non zero values as meaning that a path loop exists. Fix
this by explicitly checking for errors and gracefully return them to
user space.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
When doing an incremental send we can end up not moving directories that
have the same name. This happens when the same parent directory has
different child directories with the same name in the parent and send
snapshots.
For example, consider the following scenario:
Parent snapshot:
. (ino 256)
|---- d/ (ino 257)
| |--- p1/ (ino 258)
|
|---- p1/ (ino 259)
Send snapshot:
. (ino 256)
|--- d/ (ino 257)
|--- p1/ (ino 259)
|--- p1/ (ino 258)
The directory named "d" (inode 257) has in both snapshots an entry with
the name "p1" but it refers to different inodes in both snapshots (inode
258 in the parent snapshot and inode 259 in the send snapshot). When
attempting to move inode 258, the operation is delayed because its new
parent, inode 259, was not yet moved/renamed (as the stream is currently
processing inode 258). Then when processing inode 259, we also end up
delaying its move/rename operation so that it happens after inode 258 is
moved/renamed. This decision to delay the move/rename rename operation
of inode 259 is due to the fact that the new parent inode (257) still
has inode 258 as its child, which has the same name has inode 259. So
we end up with inode 258 move/rename operation waiting for inode's 259
move/rename operation, which in turn it waiting for inode's 258
move/rename. This results in ending the send stream without issuing
move/rename operations for inodes 258 and 259 and generating the
following warnings in syslog/dmesg:
[148402.979747] ------------[ cut here ]------------
[148402.980588] WARNING: CPU: 14 PID: 4117 at fs/btrfs/send.c:6177 btrfs_ioctl_send+0xe03/0xe51 [btrfs]
[148402.981928] Modules linked in: btrfs crc32c_generic xor raid6_pq acpi_cpufreq tpm_tis ppdev tpm parport_pc psmouse parport sg pcspkr i2c_piix4 i2c_core evdev processor serio_raw button loop autofs4 ext4 crc16 jbd2 mbcache sr_mod cdrom sd_mod ata_generic virtio_scsi ata_piix libata virtio_pci virtio_ring virtio e1000 scsi_mod floppy [last unloaded: btrfs]
[148402.986999] CPU: 14 PID: 4117 Comm: btrfs Tainted: G W 4.6.0-rc7-btrfs-next-31+ #1
[148402.988136] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS by qemu-project.org 04/01/2014
[148402.988136] 0000000000000000 ffff88022139fca8 ffffffff8126b42c 0000000000000000
[148402.988136] 0000000000000000 ffff88022139fce8 ffffffff81052b14 000018212139fac8
[148402.988136] ffff88022b0db400 0000000000000000 0000000000000001 0000000000000000
[148402.988136] Call Trace:
[148402.988136] [<ffffffff8126b42c>] dump_stack+0x67/0x90
[148402.988136] [<ffffffff81052b14>] __warn+0xc2/0xdd
[148402.988136] [<ffffffff81052beb>] warn_slowpath_null+0x1d/0x1f
[148402.988136] [<ffffffffa04bc831>] btrfs_ioctl_send+0xe03/0xe51 [btrfs]
[148402.988136] [<ffffffffa048b358>] btrfs_ioctl+0x14f/0x1f81 [btrfs]
[148402.988136] [<ffffffff8108e456>] ? arch_local_irq_save+0x9/0xc
[148402.988136] [<ffffffff8108eb51>] ? __lock_is_held+0x3c/0x57
[148402.988136] [<ffffffff8118da05>] vfs_ioctl+0x18/0x34
[148402.988136] [<ffffffff8118e00c>] do_vfs_ioctl+0x550/0x5be
[148402.988136] [<ffffffff81196f0c>] ? __fget+0x6b/0x77
[148402.988136] [<ffffffff81196fa1>] ? __fget_light+0x62/0x71
[148402.988136] [<ffffffff8118e0d1>] SyS_ioctl+0x57/0x79
[148402.988136] [<ffffffff8149e025>] entry_SYSCALL_64_fastpath+0x18/0xa8
[148402.988136] [<ffffffff8108e89d>] ? trace_hardirqs_off_caller+0x3f/0xaa
[148403.011373] ---[ end trace a4539270c8056f8b ]---
[148403.012296] ------------[ cut here ]------------
[148403.013071] WARNING: CPU: 14 PID: 4117 at fs/btrfs/send.c:6194 btrfs_ioctl_send+0xe19/0xe51 [btrfs]
[148403.014447] Modules linked in: btrfs crc32c_generic xor raid6_pq acpi_cpufreq tpm_tis ppdev tpm parport_pc psmouse parport sg pcspkr i2c_piix4 i2c_core evdev processor serio_raw button loop autofs4 ext4 crc16 jbd2 mbcache sr_mod cdrom sd_mod ata_generic virtio_scsi ata_piix libata virtio_pci virtio_ring virtio e1000 scsi_mod floppy [last unloaded: btrfs]
[148403.019708] CPU: 14 PID: 4117 Comm: btrfs Tainted: G W 4.6.0-rc7-btrfs-next-31+ #1
[148403.020104] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS by qemu-project.org 04/01/2014
[148403.020104] 0000000000000000 ffff88022139fca8 ffffffff8126b42c 0000000000000000
[148403.020104] 0000000000000000 ffff88022139fce8 ffffffff81052b14 000018322139fac8
[148403.020104] ffff88022b0db400 0000000000000000 0000000000000001 0000000000000000
[148403.020104] Call Trace:
[148403.020104] [<ffffffff8126b42c>] dump_stack+0x67/0x90
[148403.020104] [<ffffffff81052b14>] __warn+0xc2/0xdd
[148403.020104] [<ffffffff81052beb>] warn_slowpath_null+0x1d/0x1f
[148403.020104] [<ffffffffa04bc847>] btrfs_ioctl_send+0xe19/0xe51 [btrfs]
[148403.020104] [<ffffffffa048b358>] btrfs_ioctl+0x14f/0x1f81 [btrfs]
[148403.020104] [<ffffffff8108e456>] ? arch_local_irq_save+0x9/0xc
[148403.020104] [<ffffffff8108eb51>] ? __lock_is_held+0x3c/0x57
[148403.020104] [<ffffffff8118da05>] vfs_ioctl+0x18/0x34
[148403.020104] [<ffffffff8118e00c>] do_vfs_ioctl+0x550/0x5be
[148403.020104] [<ffffffff81196f0c>] ? __fget+0x6b/0x77
[148403.020104] [<ffffffff81196fa1>] ? __fget_light+0x62/0x71
[148403.020104] [<ffffffff8118e0d1>] SyS_ioctl+0x57/0x79
[148403.020104] [<ffffffff8149e025>] entry_SYSCALL_64_fastpath+0x18/0xa8
[148403.020104] [<ffffffff8108e89d>] ? trace_hardirqs_off_caller+0x3f/0xaa
[148403.038981] ---[ end trace a4539270c8056f8c ]---
There's another issue caused by similar (but more complex) changes in the
directory hierarchy that makes move/rename operations fail, described with
the following example:
Parent snapshot:
.
|---- a/ (ino 262)
| |---- c/ (ino 268)
|
|---- d/ (ino 263)
|---- ance/ (ino 267)
|---- e/ (ino 264)
|---- f/ (ino 265)
|---- ance/ (ino 266)
Send snapshot:
.
|---- a/ (ino 262)
|---- c/ (ino 268)
| |---- ance/ (ino 267)
|
|---- d/ (ino 263)
| |---- ance/ (ino 266)
|
|---- f/ (ino 265)
|---- e/ (ino 264)
When the inode 265 is processed, the path for inode 267 is computed, which
at that time corresponds to "d/ance", and it's stored in the names cache.
Later on when processing inode 266, we end up orphanizing (renaming to a
name matching the pattern o<ino>-<gen>-<seq>) inode 267 because it has
the same name as inode 266 and it's currently a child of the new parent
directory (inode 263) for inode 266. After the orphanization and while we
are still processing inode 266, a rename operation for inode 266 is
generated. However the source path for that rename operation is incorrect
because it ends up using the old, pre-orphanization, name of inode 267.
The no longer valid name for inode 267 was previously cached when
processing inode 265 and it remains usable and considered valid until
the inode currently being processed has a number greater than 267.
This resulted in the receiving side failing with the following error:
ERROR: rename d/ance/ance -> d/ance failed: No such file or directory
So fix these issues by detecting such circular dependencies for rename
operations and by clearing the cached name of an inode once the inode
is orphanized.
A test case for fstests will follow soon.
Signed-off-by: Robbie Ko <robbieko@synology.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
[Rewrote change log to be more detailed and organized, and improved
comments]
Signed-off-by: Filipe Manana <fdmanana@suse.com>
When we start an fsync we start ordered extents for all delalloc ranges.
However before attempting to log the inode, we only wait for those ordered
extents if we are not doing a full sync (bit BTRFS_INODE_NEEDS_FULL_SYNC
is set in the inode's flags). This means that if an ordered extent
completes with an IO error before we check if we can skip logging the
inode, we will not catch and report the IO error to user space. This is
because on an IO error, when the ordered extent completes we do not
update the inode, so if the inode was not previously updated by the
current transaction we end up not logging it through calls to fsync and
therefore not check its mapping flags for the presence of IO errors.
Fix this by checking for errors in the flags of the inode's mapping when
we notice we can skip logging the inode.
This caused sporadic failures in the test generic/331 (which explicitly
tests for IO errors during an fsync call).
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Pull btrfs updates from Chris Mason:
"This pull is dedicated to Josef's enospc rework, which we've been
testing for a few releases now. It fixes some early enospc problems
and is dramatically faster.
This also includes an updated fix for the delalloc accounting that
happens after a fault in copy_from_user. My patch in v4.7 was almost
but not quite enough"
* 'for-linus-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
Btrfs: fix delalloc accounting after copy_from_user faults
Btrfs: avoid deadlocks during reservations in btrfs_truncate_block
Btrfs: use FLUSH_LIMIT for relocation in reserve_metadata_bytes
Btrfs: fill relocation block rsv after allocation
Btrfs: always use trans->block_rsv for orphans
Btrfs: change how we calculate the global block rsv
Btrfs: use root when checking need_async_flush
Btrfs: don't bother kicking async if there's nothing to reclaim
Btrfs: fix release reserved extents trace points
Btrfs: add fsid to some tracepoints
Btrfs: add tracepoints for flush events
Btrfs: fix delalloc reservation amount tracepoint
Btrfs: trace pinned extents
Btrfs: introduce ticketed enospc infrastructure
Btrfs: add tracepoint for adding block groups
Btrfs: warn_on for unaccounted spaces
Btrfs: change delayed reservation fallback behavior
Btrfs: always reserve metadata for delalloc extents
Btrfs: fix callers of btrfs_block_rsv_migrate
Btrfs: add bytes_readonly to the spaceinfo at once
Merge updates from Andrew Morton:
- a few misc bits
- ocfs2
- most(?) of MM
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (125 commits)
thp: fix comments of __pmd_trans_huge_lock()
cgroup: remove unnecessary 0 check from css_from_id()
cgroup: fix idr leak for the first cgroup root
mm: memcontrol: fix documentation for compound parameter
mm: memcontrol: remove BUG_ON in uncharge_list
mm: fix build warnings in <linux/compaction.h>
mm, thp: convert from optimistic swapin collapsing to conservative
mm, thp: fix comment inconsistency for swapin readahead functions
thp: update Documentation/{vm/transhuge,filesystems/proc}.txt
shmem: split huge pages beyond i_size under memory pressure
thp: introduce CONFIG_TRANSPARENT_HUGE_PAGECACHE
khugepaged: add support of collapse for tmpfs/shmem pages
shmem: make shmem_inode_info::lock irq-safe
khugepaged: move up_read(mmap_sem) out of khugepaged_alloc_page()
thp: extract khugepaged from mm/huge_memory.c
shmem, thp: respect MADV_{NO,}HUGEPAGE for file mappings
shmem: add huge pages support
shmem: get_unmapped_area align huge page
shmem: prepare huge= mount option and sysfs knob
mm, rmap: account shmem thp pages
...
Vladimir has noticed that we might declare memcg oom even during
readahead because read_pages only uses GFP_KERNEL (with mapping_gfp
restriction) while __do_page_cache_readahead uses
page_cache_alloc_readahead which adds __GFP_NORETRY to prevent from
OOMs. This gfp mask discrepancy is really unfortunate and easily
fixable. Drop page_cache_alloc_readahead() which only has one user and
outsource the gfp_mask logic into readahead_gfp_mask and propagate this
mask from __do_page_cache_readahead down to read_pages.
This alone would have only very limited impact as most filesystems are
implementing ->readpages and the common implementation mpage_readpages
does GFP_KERNEL (with mapping_gfp restriction) again. We can tell it to
use readahead_gfp_mask instead as this function is called only during
readahead as well. The same applies to read_cache_pages.
ext4 has its own ext4_mpage_readpages but the path which has pages !=
NULL can use the same gfp mask. Btrfs, cifs, f2fs and orangefs are
doing a very similar pattern to mpage_readpages so the same can be
applied to them as well.
[akpm@linux-foundation.org: coding-style fixes]
[mhocko@suse.com: restrict gfp mask in mpage_alloc]
Link: http://lkml.kernel.org/r/20160610074223.GC32285@dhcp22.suse.cz
Link: http://lkml.kernel.org/r/1465301556-26431-1-git-send-email-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Cc: Vladimir Davydov <vdavydov@parallels.com>
Cc: Chris Mason <clm@fb.com>
Cc: Steve French <sfrench@samba.org>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Jan Kara <jack@suse.cz>
Cc: Mike Marshall <hubcap@omnibond.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Changman Lee <cm224.lee@samsung.com>
Cc: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull core block updates from Jens Axboe:
- the big change is the cleanup from Mike Christie, cleaning up our
uses of command types and modified flags. This is what will throw
some merge conflicts
- regression fix for the above for btrfs, from Vincent
- following up to the above, better packing of struct request from
Christoph
- a 2038 fix for blktrace from Arnd
- a few trivial/spelling fixes from Bart Van Assche
- a front merge check fix from Damien, which could cause issues on
SMR drives
- Atari partition fix from Gabriel
- convert cfq to highres timers, since jiffies isn't granular enough
for some devices these days. From Jan and Jeff
- CFQ priority boost fix idle classes, from me
- cleanup series from Ming, improving our bio/bvec iteration
- a direct issue fix for blk-mq from Omar
- fix for plug merging not involving the IO scheduler, like we do for
other types of merges. From Tahsin
- expose DAX type internally and through sysfs. From Toshi and Yigal
* 'for-4.8/core' of git://git.kernel.dk/linux-block: (76 commits)
block: Fix front merge check
block: do not merge requests without consulting with io scheduler
block: Fix spelling in a source code comment
block: expose QUEUE_FLAG_DAX in sysfs
block: add QUEUE_FLAG_DAX for devices to advertise their DAX support
Btrfs: fix comparison in __btrfs_map_block()
block: atari: Return early for unsupported sector size
Doc: block: Fix a typo in queue-sysfs.txt
cfq-iosched: Charge at least 1 jiffie instead of 1 ns
cfq-iosched: Fix regression in bonnie++ rewrite performance
cfq-iosched: Convert slice_resid from u64 to s64
block: Convert fifo_time from ulong to u64
blktrace: avoid using timespec
block/blk-cgroup.c: Declare local symbols static
block/bio-integrity.c: Add #include "blk.h"
block/partition-generic.c: Remove a set-but-not-used variable
block: bio: kill BIO_MAX_SIZE
cfq-iosched: temporarily boost queue priority for idle classes
block: drbd: avoid to use BIO_MAX_SIZE
block: bio: remove BIO_MAX_SECTORS
...
__btrfs_abort_transaction doesn't use its root parameter except to
obtain an fs_info pointer. We can obtain that from trans->root->fs_info
for now and from trans->fs_info in a later patch.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_trans_handle->root is documented as for use for confirming
that the root passed in to start the transaction is the same as the
one ending it. It's used in several places when an fs_info pointer
is needed, so let's just add an fs_info pointer directly. Eventually,
the root pointer can be removed.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In btrfs_relocate_chunk, we get a transaction handle via
btrfs_start_trans_remove_block_group, which starts the transaction
using the extent root. When we call btrfs_end_transaction, we're calling
it using the chunk root.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This patch converts the macros used to calculate various node
size limits to static inlines. That way we get type checking for free.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We use BTRFS_LEAF_DATA_SIZE - sizeof(struct btrfs_item) in
several places. This introduces a BTRFS_MAX_ITEM_SIZE macro to do the
same.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We just need a superblock, but we look it up using two different
roots depending on the call site. Let's just use a superblock
pointer initialized at the outset.
This is mostly for Coccinelle not to choke on my root push up set.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Now that we have a dummy fs_info associated with each test that
uses a root, we don't need the DUMMY_ROOT bit anymore. This lets
us make choices without needing an actual root like in e.g.
btrfs_find_create_tree_block.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This allows the upcoming patchset to push nodesize and sectorsize into
fs_info.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We have all these stubs that only exist because they're called from
btrfs_run_sanity_tests, which is a static inside super.c. Let's just
move it all into tests/btrfs-tests.c and only have one stub.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_test_opt and friends only use the root pointer to access
the fs_info. Let's pass the fs_info directly in preparation to
eliminate similar patterns all over btrfs.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When using trace events to debug a problem, it's impossible to determine
which file system generated a particular event. This patch adds a
macro to prefix standard information to the head of a trace event.
The extent_state alloc/free events are all that's left without an
fs_info available.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In order to provide an fsid for trace events, we'll need a btrfs_fs_info
pointer. The most lightweight way to do that for btrfs_work structures
is to associate it with the __btrfs_workqueue structure. Each queued
btrfs_work structure has a workqueue associated with it, so that's
a natural fit. It's a privately defined structures, so we add accessors
to retrieve the fs_info pointer.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The mixed blockgroup reporting has been fixed by commit
ae02d1bd07
"btrfs: fix mixed block count of available space"
Signed-off-by: David Sterba <dsterba@suse.com>
Recently during a crash it became apparent that this particular message
can be printed so many times that it causes the softlockup detector to
trigger. Fix it by ratelimiting it.
Signed-off-by: Nikolay Borisov <kernel@kyup.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This patch adds ratelimiting to all messages which are not using the _rl
version of the various printing APIs in btrfs. This is designed to be
used as a safety net, since a flood messages might cause the softlockup
detector to trigger. To reduce interference between different classes of
messages use a separate ratelimit state for every class of message.
Signed-off-by: Nikolay Borisov <kernel@kyup.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Mounting a btrfs can resume previous balance operations asynchronously.
An user got a crash when one drive has some corrupt sectors.
Since balance can cancel itself in case of any error, we can gracefully
return errors to upper layers and let balance do the cancel job.
Reported-by: sash <master.b.at.raven@chefmail.de>
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
During build_backref_tree(), if we fail to read a btree node,
we can eventually run into BUG_ON(cache->nr_nodes) that we put
in backref_cache_cleanup(), meaning we have at least one
memory leak.
This frees the backref_node that we's allocated at the very
beginning of build_backref_tree().
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
eb->io_pages is set in read_extent_buffer_pages().
In case of readpage failure, for pages that have been added to bio,
it calls bio_endio and later readpage_io_failed_hook() does the work.
When this eb's page (couldn't be the 1st page) fails to add itself to bio
due to failure in merge_bio(), it cannot decrease eb->io_pages via bio_endio,
and ends up with a memory leak eventually.
This lets __do_readpage propagate errors to callers and adds the
'atomic_dec(&eb->io_pages)'.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Since it is just an in-memory building of the backrefs of several
btree blocks, nothing is fatal other than memory leaks, so this
changes BUG_ON()'s to ASSERT()'s.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In btrfs, btrfs_space_info's bytes_may_use is treated as fs used
space, as what we do in reserve_metadata_bytes() or
btrfs_alloc_data_chunk_ondemand(), so in dump_space_info(), when
calculating free space, we should also subtract btrfs_space_info's
bytes_may_use.
Signed-off-by: Wang Xiaoguang <wangxg.fnst@cn.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs/073 invokes scrub ioctl in a tight loop. In subpage-blocksize
scenario this results in a lot of "scrub: size assumption sectorsize !=
PAGE_SIZE " messages being printed on the console. To reduce the number
of such messages this commit uses btrfs_err_rl() instead of
btrfs_err().
Signed-off-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Extract cow_file_range() new parameters for both in-band dedupe and
subpage sector size patchset.
This should make conflict of both patchset to minimal, and reduce the
effort needed to rebase them.
Cc: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Cc: David Sterba <dsterba@suse.cz>
Signed-off-by: Wang Xiaoguang <wangxg.fnst@cn.fujitsu.com>
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This is similar to btrfs_submit_compressed_read(), if we fail after
bio is allocated, then we can use bio_endio() and errors are saved
in bio->bi_error. But please note that we don't return errors to
its caller because the caller assumes it won't call endio to cleanup
on error.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
An inconsistent behavior due to stale reads from the
disk was reported
mail-archive.com/linux-btrfs@vger.kernel.org/msg54188.html
This patch will make sure devices are synced before
return in the unmount thread.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
One can use btrfs-corrupt-block to hit BUG_ON() in merge_bio(),
thus this aims to stop anyone to panic the whole system by using
their btrfs.
Since the error in merge_bio can only come from __btrfs_map_block()
when chunk tree mapping has something insane and __btrfs_map_block()
has already had printed the reason, we can just return errors in
merge_bio.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
BTRFS is using a variety of slab caches to satisfy internal needs.
Those slab caches are always allocated with the SLAB_RECLAIM_ACCOUNT,
meaning allocations from the caches are going to be accounted as
SReclaimable. At the same time btrfs is not registering any shrinkers
whatsoever, thus preventing memory from the slabs to be shrunk. This
means those caches are not in fact reclaimable.
To fix this remove the SLAB_RECLAIM_ACCOUNT on all caches apart from the
inode cache, since this one is being freed by the generic VFS super_block
shrinker. Also set the transaction related caches as SLAB_TEMPORARY,
to better document the lifetime of the objects (it just translates
to SLAB_RECLAIM_ACCOUNT).
Signed-off-by: Nikolay Borisov <n.borisov.lkml@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
size contains the value returned by posix_acl_from_xattr(), which
returns -ERANGE, -ENODATA, zero, or an integer greater than zero. So
replace -ENOENT by -ERANGE.
Signed-off-by: Salah Triki <salah.triki@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The code flow in btrfs_new_inode allows for btrfs_evict_inode to be
called with not fully initialised inode (e.g. ->root member not
being set). This can happen when btrfs_set_inode_index in
btrfs_new_inode fails, which in turn would call iput for the newly
allocated inode. This in turn leads to vfs calling into btrfs_evict_inode.
This leads to null pointer dereference. To handle this situation check whether
the passed inode has root set and just free it in case it doesn't.
Signed-off-by: Nikolay Borisov <kernel@kyup.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We use read_node_slot() to read btree node and it has two cases,
a) slot is out of range, which means 'no such entry'
b) we fail to read the block, due to checksum fails or corrupted
content or not with uptodate flag.
But we're returning NULL in both cases, this makes it return -ENOENT
in case a) and return -EIO in case b), and this fixes its callers
as well as btrfs_search_forward() 's caller to catch the new errors.
The problem is reported by Peter Becker, and I can manage to
hit the same BUG_ON by mounting my fuzz image.
Reported-by: Peter Becker <floyd.net@gmail.com>
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
With btrfs-corrupt-block, one can set btree node/leaf's field, if
we assign a negative value to node/leaf, we can get various hangs,
eg. if extent_root's nritems is -2ULL, then we get stuck in
btrfs_read_block_groups() because it has a while loop and
btrfs_search_slot() on extent_root will always return the first
child.
This lets us know what's happening and returns a EINVAL to callers
instead of returning the first item.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
With btrfs-corrupt-block, one can drop one chunk item and mounting
will end up with a panic in btrfs_full_stripe_len().
This doesn't not remove the BUG_ON, but instead checks it a bit
earlier when we find the block group item.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Commit 56244ef151 was almost but not quite enough to fix the
reservation math after btrfs_copy_from_user returned partial copies.
Some users are still seeing warnings in btrfs_destroy_inode, and with a
long enough test run I'm able to trigger them as well.
This patch fixes the accounting math again, bringing it much closer to
the way it was before the sectorsize conversion Chandan did. The
problem is accounting for the offset into the page/sector when we do a
partial copy. This one just uses the dirty_sectors variable which
should already be updated properly.
Signed-off-by: Chris Mason <clm@fb.com>
cc: stable@vger.kernel.org # v4.6+
The new enospc code makes it possible to deadlock if we don't use
FLUSH_LIMIT during reservations inside a transaction. This enforces
the correct flush type to avoid both deadlocks and assertions
Signed-off-by: Chris Mason <clm@fb.com>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Add missing comparison to op in expression, which was forgotten when doing
the REQ_OP transition.
Fixes: b3d3fa5199 ("btrfs: update __btrfs_map_block for REQ_OP transition")
Signed-off-by: Vincent Stehlé <vincent.stehle@intel.com>
Reviewed-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
We used to allow you to set FLUSH_ALL and then just wouldn't do things like
commit transactions or wait on ordered extents if we noticed you were in a
transaction. However now that all the flushing for FLUSH_ALL is asynchronous
we've lost the ability to tell, and we could end up deadlocking. So instead use
FLUSH_LIMIT in reserve_metadata_bytes in relocation and then return -EAGAIN if
we error out to preserve the previous behavior. I've also added an ASSERT() to
catch anybody else who tries to do this. Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Since we set the reloc control before we've reserved our space for relocation we
could race with a root being dirtied and not actually have space to do our init
reloc root. So once we've allocated it and set it up go ahead and make our
reservation before setting the relocate control, that way anybody who tries to
do the reloc root init has space to use. Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This is the case all the time anyway except for relocation which could be doing
a reloc root for a non ref counted root, in which case we'd end up with some
random block rsv rather than the one we have our reservation in. If there isn't
enough space in the block rsv we are trying to steal from we'll BUG() because we
expect there to be space for the orphan to make its reservation. Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Traditionally we've calculated the global block rsv by guessing how much of the
metadata used amount was the extent tree, and then taking the data size and
figuring out how large the csum tree would have to be to hold that much data.
This is imprecise and falls down on MIXED file systems as we can't trust the
data used amount. This resulted in failures for xfstests generic/333 because it
creates lots of clones, which explodes out the extent tree. Our global reserve
calculations were woefully inaccurate in this case which meant we got into a
situation where we did not have enough reserved to do our work.
We know we only use the global block rsv for the extent, csum, and root trees,
so just get the bytes used for these trees and use that as the basis of our
global reserve. Since these are not reference counted trees the bytes_used
value will be accurate. This fixed the transaction aborts seen with
generic/333. Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Instead of doing fs_info->fs_root in need_async_flush, which may not be set
during recovery when mounting, just pass the root itself in, which makes more
sense as thats what btrfs_calc_reclaim_metadata_size takes.
Signed-off-by: Josef Bacik <jbacik@fb.com>
Reported-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We do this check when we start the async reclaimer thread, might as well check
before we kick it off to save us some cycles. Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We were doing trace_btrfs_release_reserved_extent() in pin_down_extent which
isn't quite right because we will go through and free that extent later when we
unpin, so it messes up apps that are accounting for the reservation space. We
were also unconditionally doing it in __btrfs_free_reserved_extent(), when we
only actually free the reservation instead of pinning the extent. Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We want to track when we're triggering flushing from our reservation code and
what flushing is being done when we start flushing. Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We can sometimes drop the reservation we had for our inode, so we need to remove
that amount from to_reserve so that our tracepoint reports a valid amount of
space.
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Pinned extents are an important metric to keep track of for enospc.
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Our enospc flushing sucks. It is born from a time where we were early
enospc'ing constantly because multiple threads would race in for the same
reservation and randomly starve other ones out. So I came up with this solution
to block any other reservations from happening while one guy tried to flush
stuff to satisfy his reservation. This gives us pretty good correctness, but
completely crap latency.
The solution I've come up with is ticketed reservations. Basically we try to
make our reservation, and if we can't we put a ticket on a list in order and
kick off an async flusher thread. This async flusher thread does the same old
flushing we always did, just asynchronously. As space is freed and added back
to the space_info it checks and sees if we have any tickets that need
satisfying, and adds space to the tickets and wakes up anything we've satisfied.
Once the flusher thread stops making progress it wakes up all the current
tickets and tells them to take a hike.
There is a priority list for things that can't flush, since the async flusher
could do anything we need to avoid deadlocks. These guys get priority for
having their reservation made, and will still do manual flushing themselves in
case the async flusher isn't running.
This patch gives us significantly better latencies. Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
I'm writing a tool to visualize the enospc system inside btrfs, I need this
tracepoint in order to keep track of the block groups in the system. Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
These were hidden behind enospc_debug, which isn't helpful as they indicate
actual bugs, unlike the rest of the enospc_debug stuff which is really debug
information. Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We reserve space for the inode update when we first reserve space for writing to
a file. However there are lots of ways that we can use this reservation and not
have it for subsequent ordered extents. Previously we'd fall through and try to
reserve metadata bytes for this, then we'd just steal the full reservation from
the delalloc_block_rsv, and if that didn't have enough space we'd steal the full
reservation from the global reserve. The problem with this is we can easily
just return ENOSPC and fallback to updating the inode item directly. In the
worst case (assuming 4k nodesize) we'd steal 64kib from the global reserve if we
fall all the way through, however if we just fallback and update the inode
directly we'd only steal 4k * BTRFS_PATH_MAX in the worst case which is 32kib.
We would have also just added the extent item for the inode so we likely will
have already cow'ed down most of the way to the leaf containing the inode item,
so we are more often than not only need one or two nodesize's worth of
reservations. Given the reservation for the extent itself is also a worst case
we will likely already have space to cover the inode update.
This change will make us behave better in the theoretical worst case, and much
better in the case that we don't have our reservation and cannot reserve more
metadata. Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There are a few races in the metadata reservation stuff. First we add the bytes
to the block_rsv well after we've set the bit on the inode saying that we have
space for it and after we've reserved the bytes. So use the normal
btrfs_block_rsv_add helper for this case. Secondly we can flush delalloc
extents when we try to reserve space for our write, which means that we could
have used up the space for the inode and we wouldn't know because we only check
before the reservation. So instead make sure we are always reserving space for
the inode update, and then if we don't need it release those bytes afterward.
Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
So btrfs_block_rsv_migrate just unconditionally calls block_rsv_migrate_bytes.
Not only this but it unconditionally changes the size of the block_rsv. This
isn't a bug strictly speaking, but it makes truncate block rsv's look funny
because every time we migrate bytes over its size grows, even though we only
want it to be a specific size. So collapse this into one function that takes an
update_size argument and make truncate and evict not update the size for
consistency sake. Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
For some reason we're adding bytes_readonly to the space info after we update
the space info with the block group info. This creates a tiny race where we
could over-reserve space because we haven't yet taken out the bytes_readonly
bit. Since we already know this information at the time we call
update_space_info, just pass it along so it can be updated all at once. Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Pull btrfs fixes part 2 from Chris Mason:
"This has one patch from Omar to bring iterate_shared back to btrfs.
We have a tree of work we queue up for directory items and it doesn't
lend itself well to shared access. While we're cleaning it up, Omar
has changed things to use an exclusive lock when there are delayed
items"
* 'for-linus-4.7-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
Btrfs: fix ->iterate_shared() by upgrading i_rwsem for delayed nodes
Pull btrfs fixes from Chris Mason:
"I have a two part pull this time because one of the patches Dave
Sterba collected needed to be against v4.7-rc2 or higher (we used
rc4). I try to make my for-linus-xx branch testable on top of the
last major so we can hand fixes to people on the list more easily, so
I've split this pull in two.
This first part has some fixes and two performance improvements that
we've been testing for some time.
Josef's two performance fixes are most notable. The transid tracking
patch makes a big improvement on pretty much every workload"
* 'for-linus-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
Btrfs: Force stripesize to the value of sectorsize
btrfs: fix disk_i_size update bug when fallocate() fails
Btrfs: fix error handling in map_private_extent_buffer
Btrfs: fix error return code in btrfs_init_test_fs()
Btrfs: don't do nocow check unless we have to
btrfs: fix deadlock in delayed_ref_async_start
Btrfs: track transid for delayed ref flushing
Commit fe742fd4f9 ("Revert "btrfs: switch to ->iterate_shared()"")
backed out the conversion to ->iterate_shared() for Btrfs because the
delayed inode handling in btrfs_real_readdir() is racy. However, we can
still do readdir in parallel if there are no delayed nodes.
This is a temporary fix which upgrades the shared inode lock to an
exclusive lock only when we have delayed items until we come up with a
more complete solution. While we're here, rename the
btrfs_{get,put}_delayed_items functions to make it very clear that
they're just for readdir.
Tested with xfstests and by doing a parallel kernel build:
while make tinyconfig && make -j4 && git clean dqfx; do
:
done
along with a bunch of parallel finds in another shell:
while true; do
for ((i=0; i<4; i++)); do
find . >/dev/null &
done
wait
done
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
Btrfs code currently assumes stripesize to be same as
sectorsize. However Btrfs-progs (until commit
df05c7ed455f519e6e15e46196392e4757257305) has been setting
btrfs_super_block->stripesize to a value of 4096.
This commit makes sure that the value of btrfs_super_block->stripesize
is a power of 2. Later, it unconditionally sets btrfs_root->stripesize
to sectorsize.
Signed-off-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
When doing truncate operation, btrfs_setsize() will first call
truncate_setsize() to set new inode->i_size, but if later
btrfs_truncate() fails, btrfs_setsize() will call
"i_size_write(inode, BTRFS_I(inode)->disk_i_size)" to reset the
inmemory inode size, now bug occurs. It's because for truncate
case btrfs_ordered_update_i_size() directly uses inode->i_size
to update BTRFS_I(inode)->disk_i_size, indeed we should use the
"offset" argument to update disk_i_size. Here is the call graph:
==>btrfs_truncate()
====>btrfs_truncate_inode_items()
======>btrfs_ordered_update_i_size(inode, last_size, NULL);
Here btrfs_ordered_update_i_size()'s offset argument is last_size.
And below test case can reveal this bug:
dd if=/dev/zero of=fs.img bs=$((1024*1024)) count=100
dev=$(losetup --show -f fs.img)
mkdir -p /mnt/mntpoint
mkfs.btrfs -f $dev
mount $dev /mnt/mntpoint
cd /mnt/mntpoint
echo "workdir is: /mnt/mntpoint"
blocksize=$((128 * 1024))
dd if=/dev/zero of=testfile bs=$blocksize count=1
sync
count=$((17*1024*1024*1024/blocksize))
echo "file size is:" $((count*blocksize))
for ((i = 1; i <= $count; i++)); do
i=$((i + 1))
dst_offset=$((blocksize * i))
xfs_io -f -c "reflink testfile 0 $dst_offset $blocksize"\
testfile > /dev/null
done
sync
truncate --size 0 testfile
ls -l testfile
du -sh testfile
exit
In this case, truncate operation will fail for enospc reason and
"du -sh testfile" returns value greater than 0, but testfile's
size is 0, we need to reflect correct inode->i_size.
Signed-off-by: Wang Xiaoguang <wangxg.fnst@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
map_private_extent_buffer() can return -EINVAL in two different cases,
1. when the requested contents span two pages if nodesize is larger
than pagesize,
2. when it detects something insane.
The 2nd one used to be only a WARN_ON(1), and we decided to return a error
to callers, but we didn't fix up all its callers, which will be
addressed by this patch.
Without this, btrfs may end up with 'general protection', ie.
reading invalid memory.
Reported-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
Fix to return a negative error code from the kern_mount() error handling
case instead of 0(ret is set to 0 by register_filesystem), as done
elsewhere in this function.
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
Before we write into prealloc/nocow space we have to make sure that there are no
references to the extents we are writing into, which means checking the extent
tree and csum tree in the case of nocow. So we don't want to do the nocow dance
unless we can't reserve data space, since it's a serious drag on performance.
With the following sequence
fallocate -l10737418240 /mnt/btrfs-test/file
cp --reflink /mnt/btrfs-test/file /mnt/btrfs-test/link
fio --name=randwrite --rw=randwrite --bs=4k --filename=/mnt/btrfs-test/file \
--end_fsync=1
we get the worst case scenario where we have to fall back on to doing the check
anyway.
Without this patch
lat (usec): min=5, max=111598, avg=27.65, stdev=124.51
write: io=10240MB, bw=126876KB/s, iops=31718, runt= 82646msec
With this patch
lat (usec): min=3, max=91210, avg=14.09, stdev=110.62
write: io=10240MB, bw=212753KB/s, iops=53188, runt= 49286msec
We get twice the throughput, half of the runtime, and half of the average
latency. Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
[ PAGE_CACHE_ removal related fixups ]
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
"Btrfs: track transid for delayed ref flushing" was deadlocking on
btrfs_attach_transaction because its not safe to call from the async
delayed ref start code. This commit brings back btrfs_join_transaction
instead and checks for a blocked commit.
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
Using the offwakecputime bpf script I noticed most of our time was spent waiting
on the delayed ref throttling. This is what is supposed to happen, but
sometimes the transaction can commit and then we're waiting for throttling that
doesn't matter anymore. So change this stuff to be a little smarter by tracking
the transid we were in when we initiated the throttling. If the transaction we
get is different then we can just bail out. This resulted in a 50% speedup in
my fs_mark test, and reduced the amount of time spent throttling by 60 seconds
over the entire run (which is about 30 minutes). Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
Pull btrfs fixes from Chris Mason:
"The most user visible change here is a fix for our recent superblock
validation checks that were causing problems on non-4k pagesized
systems"
* 'for-linus-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
Btrfs: btrfs_check_super_valid: Allow 4096 as stripesize
btrfs: remove build fixup for qgroup_account_snapshot
btrfs: use new error message helper in qgroup_account_snapshot
btrfs: avoid blocking open_ctree from cleaner_kthread
Btrfs: don't BUG_ON() in btrfs_orphan_add
btrfs: account for non-CoW'd blocks in btrfs_abort_transaction
Btrfs: check if extent buffer is aligned to sectorsize
btrfs: Use correct format specifier
Older btrfs-progs/mkfs.btrfs sets 4096 as the stripesize. Hence
restricting stripesize to be equal to sectorsize would cause super block
validation to return an error on architectures where PAGE_SIZE is not
equal to 4096.
Hence as a workaround, this commit allows stripesize to be set to 4096
bytes.
Signed-off-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Introduced in 2c1984f244 ("btrfs: build fixup for
qgroup_account_snapshot") as temporary bisectability build fixup.
Signed-off-by: David Sterba <dsterba@suse.com>
This fixes a problem introduced in commit 2f3165ecf1
"btrfs: don't force mounts to wait for cleaner_kthread to delete one or more subvolumes".
open_ctree eventually calls btrfs_replay_log which in turn calls
btrfs_commit_super which tries to lock the cleaner_mutex, causing a
recursive mutex deadlock during mount.
Instead of playing whack-a-mole trying to keep up with all the
functions that may want to lock cleaner_mutex, put all the cleaner_mutex
lockers back where they were, and attack the problem more directly:
keep cleaner_kthread asleep until the filesystem is mounted.
When filesystems are mounted read-only and later remounted read-write,
open_ctree did not set fs_info->open and neither does anything else.
Set this flag in btrfs_remount so that neither btrfs_delete_unused_bgs
nor cleaner_kthread get confused by the common case of "/" filesystem
read-only mount followed by read-write remount.
Signed-off-by: Zygo Blaxell <ce3g8jdj@umail.furryterror.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This is just a screwup for developers, so change it to an ASSERT() so developers
notice when things go wrong and deal with the error appropriately if ASSERT()
isn't enabled. Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Reviewed-by: Mark Fasheh <mfasheh@suse.de>
Signed-off-by: David Sterba <dsterba@suse.com>
The test for !trans->blocks_used in btrfs_abort_transaction is
insufficient to determine whether it's safe to drop the transaction
handle on the floor. btrfs_cow_block, informed by should_cow_block,
can return blocks that have already been CoW'd in the current
transaction. trans->blocks_used is only incremented for new block
allocations. If an operation overlaps the blocks in the current
transaction entirely and must abort the transaction, we'll happily
let it clean up the trans handle even though it may have modified
the blocks and will commit an incomplete operation.
In the long-term, I'd like to do closer tracking of when the fs
is actually modified so we can still recover as gracefully as possible,
but that approach will need some discussion. In the short term,
since this is the only code using trans->blocks_used, let's just
switch it to a bool indicating whether any blocks were used and set
it when should_cow_block returns false.
Cc: stable@vger.kernel.org # 3.4+
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Thanks to fuzz testing, we can pass an invalid bytenr to extent buffer
via alloc_extent_buffer(). An unaligned eb can have more pages than it
should have, which ends up extent buffer's leak or some corrupted content
in extent buffer.
This adds a warning to let us quickly know what was happening.
Now that alloc_extent_buffer() no more returns NULL, this changes its
caller and callers of its caller to match with the new error
handling.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Component mirror_num of struct btrfsic_block is defined
as unsigned int. Use %u as format specifier.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Pull btrfs fixes from Chris Mason:
"Has some fixes and some new self tests for btrfs. The self tests are
usually disabled in the .config file (unless you're doing btrfs dev
work), and this bunch is meant to find problems with the 64K page size
patches.
Jeff has a patch to help people see if they are using the hardware
assist crc32c module, which really helps us nail down problems when
people ask why crcs are using so much CPU.
Otherwise, it's small fixes"
* 'for-linus-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
Btrfs: self-tests: Fix extent buffer bitmap test fail on BE system
Btrfs: self-tests: Fix test_bitmaps fail on 64k sectorsize
Btrfs: self-tests: Use macros instead of constants and add missing newline
Btrfs: self-tests: Support testing all possible sectorsizes and nodesizes
Btrfs: self-tests: Execute page straddling test only when nodesize < PAGE_SIZE
btrfs: advertise which crc32c implementation is being used at module load
Btrfs: add validadtion checks for chunk loading
Btrfs: add more validation checks for superblock
Btrfs: clear uptodate flags of pages in sys_array eb
Btrfs: self-tests: Support non-4k page size
Btrfs: Fix integer overflow when calculating bytes_per_bitmap
Btrfs: test_check_exists: Fix infinite loop when searching for free space entries
Btrfs: end transaction if we abort when creating uuid root
btrfs: Use __u64 in exported linux/btrfs.h.
To avoid confusion between REQ_OP_FLUSH, which is handled by
request_fn drivers, and upper layers requesting the block layer
perform a flush sequence along with possibly a WRITE, this patch
renames REQ_FLUSH to REQ_PREFLUSH.
Signed-off-by: Mike Christie <mchristi@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
We don't need bi_rw to be so large on 64 bit archs, so
reduce it to unsigned int.
Signed-off-by: Mike Christie <mchristi@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
The bio REQ_OP and bi_rw rq_flag_bits are now always setup, so there is
no need to pass around the rq_flag_bits bits too. btrfs users should
should access the bio insead.
Signed-off-by: Mike Christie <mchristi@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
We no longer pass in a bitmap of rq_flag_bits bits to __btrfs_map_block.
It will always be a REQ_OP, or the btrfs specific REQ_GET_READ_MIRRORS,
so this drops the bit tests.
Signed-off-by: Mike Christie <mchristi@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
This should be the easier cases to convert btrfs to
bio_set_op_attrs/bio_op.
They are mostly just cut and replace type of changes.
Signed-off-by: Mike Christie <mchristi@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
This patch has btrfs's submit_one_bio users set the bio op using
bio_set_op_attrs and get the op using bio_op.
The next patches will continue to convert btrfs,
so submit_bio_hook and merge_bio_hook
related code will be modified to take only the bio. I did
not do it in this patch to try and keep it smaller.
Signed-off-by: Mike Christie <mchristi@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
This patch has the dio code use a REQ_OP for the op and rq_flag_bits
for bi_rw flags. To set/get the op it uses the bio_set_op_attrs/bio_op
accssors.
It also begins to convert btrfs's dio_submit_t because of the dio
submit_io callout use. The next patches will completely convert
this code and the reset of the btrfs code paths.
Signed-off-by: Mike Christie <mchristi@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
This has submit_bh users pass in the operation and flags separately,
so submit_bh_wbc can setup the bio op and bi_rw flags on the bio that
is submitted.
Signed-off-by: Mike Christie <mchristi@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
This has callers of submit_bio/submit_bio_wait set the bio->bi_rw
instead of passing it in. This makes that use the same as
generic_make_request and how we set the other bio fields.
Signed-off-by: Mike Christie <mchristi@redhat.com>
Fixed up fs/ext4/crypto.c
Signed-off-by: Jens Axboe <axboe@fb.com>
In __test_eb_bitmaps(), we write random data to a bitmap. Then copy
the bitmap to another bitmap that resides inside an extent buffer.
Later we verify the values of corresponding bits in the bitmap and the
bitmap inside the extent buffer. However, extent_buffer_test_bit()
reads in byte granularity while test_bit() reads in unsigned long
granularity. Hence we end up comparing wrong bits on big-endian
systems such as ppc64. This commit fixes the issue by reading the
bitmap in byte granularity.
Reviewed-by: Josef Bacik <jbacik@fb.com>
Reviewed-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Signed-off-by: Feifei Xu <xufeifei@linux.vnet.ibm.com>
Signed-off-by: David Sterba <dsterba@suse.com>
To test all possible sectorsizes, this commit adds a sectorsize
array. This commit executes the tests for all possible sectorsizes and
nodesizes.
Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Signed-off-by: Feifei Xu <xufeifei@linux.vnet.ibm.com>
Signed-off-by: David Sterba <dsterba@suse.com>
On ppc64, PAGE_SIZE is 64k which is same as BTRFS_MAX_METADATA_BLOCKSIZE.
In such a scenario, we will never be able to have an extent buffer
containing more than one page. Hence in such cases this commit does not
execute the page straddling tests.
Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Feifei Xu <xufeifei@linux.vnet.ibm.com>
Signed-off-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Since several architectures support hardware-accelerated crc32c
calculation, it would be nice to confirm that btrfs is actually using it.
We can see an elevated use count for the module, but it doesn't actually
show who the users are. This patch simply prints the name of the driver
after successfully initializing the shash.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
[ added a helper and used in module load-time message ]
Signed-off-by: David Sterba <dsterba@suse.com>
To prevent fuzzed filesystem images from panic the whole system,
we need various validation checks to refuse to mount such an image
if btrfs finds any invalid value during loading chunks, including
both sys_array and regular chunks.
Note that these checks may not be sufficient to cover all corner cases,
feel free to add more checks.
Reported-by: Vegard Nossum <vegard.nossum@oracle.com>
Reported-by: Quentin Casasnovas <quentin.casasnovas@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This adds validation checks for super_total_bytes, super_bytes_used and
super_stripesize, super_num_devices.
Reported-by: Vegard Nossum <vegard.nossum@oracle.com>
Reported-by: Quentin Casasnovas <quentin.casasnovas@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We set uptodate flag to pages in the temporary sys_array eb,
but do not clear the flag after free eb. As the special
btree inode may still hold a reference on those pages, the
uptodate flag can remain alive in them.
If btrfs_super_chunk_root has been intentionally changed to the
offset of this sys_array eb, reading chunk_root will read content
of sys_array and it will skip our beautiful checks in
btree_readpage_end_io_hook() because of
"pages of eb are uptodate => eb is uptodate"
This adds the 'clear uptodate' part to force it to read from disk.
Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Pull btrfs fixes from Chris Mason:
"The important part of this pull is Filipe's set of fixes for btrfs
device replacement. Filipe fixed a few issues seen on the list and a
number he found on his own"
* 'for-linus-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
Btrfs: deal with duplciates during extent_map insertion in btrfs_get_extent
Btrfs: fix race between device replace and read repair
Btrfs: fix race between device replace and discard
Btrfs: fix race between device replace and chunk allocation
Btrfs: fix race setting block group back to RW mode during device replace
Btrfs: fix unprotected assignment of the left cursor for device replace
Btrfs: fix race setting block group readonly during device replace
Btrfs: fix race between device replace and block group removal
Btrfs: fix race between readahead and device replace/removal
When dealing with inline extents, btrfs_get_extent will incorrectly try
to insert a duplicate extent_map. The dup hits -EEXIST from
add_extent_map, but then we try to merge with the existing one and end
up trying to insert a zero length extent_map.
This actually works most of the time, except when there are extent maps
past the end of the inline extent. rocksdb will trigger this sometimes
because it preallocates an extent and then truncates down.
Josef made a script to trigger with xfs_io:
#!/bin/bash
xfs_io -f -c "pwrite 0 1000" inline
xfs_io -c "falloc -k 4k 1M" inline
xfs_io -c "pread 0 1000" -c "fadvise -d 0 1000" -c "pread 0 1000" inline
xfs_io -c "fadvise -d 0 1000" inline
cat inline
You'll get EIOs trying to read inline after this because add_extent_map
is returning EEXIST
Signed-off-by: Chris Mason <clm@fb.com>
self-tests code assumes 4k as the sectorsize and nodesize. This commit
fix hardcoded 4K. Enables the self-tests code to be executed on non-4k
page sized systems (e.g. ppc64).
Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Feifei Xu <xufeifei@linux.vnet.ibm.com>
Signed-off-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Signed-off-by: David Sterba <dsterba@suse.com>
On ppc64, bytes_per_bitmap will be (65536*8*65536). Hence append UL to
fix integer overflow.
Reviewed-by: Josef Bacik <jbacik@fb.com>
Reviewed-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Signed-off-by: Feifei Xu <xufeifei@linux.vnet.ibm.com>
Signed-off-by: David Sterba <dsterba@suse.com>
On a ppc64 machine using 64K as the block size, assume that the RB
tree at btrfs_free_space_ctl->free_space_offset contains following
two entries:
1. A bitmap entry having an offset value of 0 and having the bits
corresponding to the address range [128M+512K, 128M+768K] set.
2. An extent entry corresponding to the address range
[128M-256K, 128M-128K]
In such a scenario, test_check_exists() invoked for checking the
existence of address range [128M+768K, 256M] can lead to an
infinite loop as explained below:
- Checking for the extent entry fails.
- Checking for a bitmap entry results in the free space info in
range [128M+512K, 128M+768K] beng returned.
- rb_prev(info) returns NULL because the bitmap entry starting from
offset 0 comes first in the RB tree.
- current_node = bitmap node.
- while (current_node)
tmp = rb_next(bitmap_node);/*tmp is extent based free space entry*/
Since extent based free space entry's last address is smaller
than the address being searched for (i.e. 128M+768K) we
incorrectly again obtain the extent node as the "next right node"
of the RB tree and thus end up looping infinitely.
This patch fixes the issue by checking the "tmp" variable which point
to the most recently searched free space node.
Reviewed-by: Josef Bacik <jbacik@fb.com>
Reviewed-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Signed-off-by: Feifei Xu <xufeifei@linux.vnet.ibm.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We still need to call btrfs_end_transaction if we call btrfs_abort_transaction,
otherwise we hang and make me super grumpy. Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
While we are finishing a device replace operation we can have a concurrent
task trying to do a read repair operation, in which case it will call
btrfs_map_block() to get a struct btrfs_bio which can have a stripe that
points to the source device of the device replace operation. This allows
for the read repair task to dereference the stripe's device pointer after
the device replace operation has freed the source device, resulting in
an invalid memory access. This is similar to the problem solved by my
previous patch in the same series and named "Btrfs: fix race between
device replace and discard".
So fix this by surrounding the call to btrfs_map_block() and the code
that uses the returned struct btrfs_bio with calls to
btrfs_bio_counter_inc_blocked() and btrfs_bio_counter_dec(), giving the
proper serialization with the finishing phase of the device replace
operation.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
While we are finishing a device replace operation, we can make a discard
operation (fs mounted with -o discard) do an invalid memory access like
the one reported by the following trace:
[ 3206.384654] general protection fault: 0000 [#1] PREEMPT SMP
[ 3206.387520] Modules linked in: dm_mod btrfs crc32c_generic xor raid6_pq acpi_cpufreq tpm_tis psmouse tpm ppdev sg parport_pc evdev i2c_piix4 parport
processor serio_raw i2c_core pcspkr button loop autofs4 ext4 crc16 jbd2 mbcache sr_mod cdrom ata_generic sd_mod virtio_scsi ata_piix libata virtio_pci
virtio_ring scsi_mod e1000 virtio floppy [last unloaded: btrfs]
[ 3206.388595] CPU: 14 PID: 29194 Comm: fsstress Not tainted 4.6.0-rc7-btrfs-next-29+ #1
[ 3206.388595] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS by qemu-project.org 04/01/2014
[ 3206.388595] task: ffff88017ace0100 ti: ffff880171b98000 task.ti: ffff880171b98000
[ 3206.388595] RIP: 0010:[<ffffffff8124d233>] [<ffffffff8124d233>] blkdev_issue_discard+0x5c/0x2a7
[ 3206.388595] RSP: 0018:ffff880171b9bb80 EFLAGS: 00010246
[ 3206.388595] RAX: ffff880171b9bc28 RBX: 000000000090d000 RCX: 0000000000000000
[ 3206.388595] RDX: ffffffff82fa1b48 RSI: ffffffff8179f46c RDI: ffffffff82fa1b48
[ 3206.388595] RBP: ffff880171b9bcc0 R08: 0000000000000000 R09: 0000000000000001
[ 3206.388595] R10: ffff880171b9bce0 R11: 000000000090f000 R12: ffff880171b9bbe8
[ 3206.388595] R13: 0000000000000010 R14: 0000000000004868 R15: 6b6b6b6b6b6b6b6b
[ 3206.388595] FS: 00007f6182e4e700(0000) GS:ffff88023fdc0000(0000) knlGS:0000000000000000
[ 3206.388595] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 3206.388595] CR2: 00007f617c2bbb18 CR3: 000000017ad9c000 CR4: 00000000000006e0
[ 3206.388595] Stack:
[ 3206.388595] 0000000000004878 0000000000000000 0000000002400040 0000000000000000
[ 3206.388595] 0000000000000000 ffff880171b9bbe8 ffff880171b9bbb0 ffff880171b9bbb0
[ 3206.388595] ffff880171b9bbc0 ffff880171b9bbc0 ffff880171b9bbd0 ffff880171b9bbd0
[ 3206.388595] Call Trace:
[ 3206.388595] [<ffffffffa042899e>] btrfs_issue_discard+0x12f/0x143 [btrfs]
[ 3206.388595] [<ffffffffa042899e>] ? btrfs_issue_discard+0x12f/0x143 [btrfs]
[ 3206.388595] [<ffffffffa042e862>] btrfs_discard_extent+0x87/0xde [btrfs]
[ 3206.388595] [<ffffffffa04303b5>] btrfs_finish_extent_commit+0xb2/0x1df [btrfs]
[ 3206.388595] [<ffffffff8149c246>] ? __mutex_unlock_slowpath+0x150/0x15b
[ 3206.388595] [<ffffffffa04464c4>] btrfs_commit_transaction+0x7fc/0x980 [btrfs]
[ 3206.388595] [<ffffffff8149c246>] ? __mutex_unlock_slowpath+0x150/0x15b
[ 3206.388595] [<ffffffffa0459af6>] btrfs_sync_file+0x38f/0x428 [btrfs]
[ 3206.388595] [<ffffffff811a8292>] vfs_fsync_range+0x8c/0x9e
[ 3206.388595] [<ffffffff811a82c0>] vfs_fsync+0x1c/0x1e
[ 3206.388595] [<ffffffff811a8417>] do_fsync+0x31/0x4a
[ 3206.388595] [<ffffffff811a8637>] SyS_fsync+0x10/0x14
[ 3206.388595] [<ffffffff8149e025>] entry_SYSCALL_64_fastpath+0x18/0xa8
[ 3206.388595] [<ffffffff81100c6b>] ? time_hardirqs_off+0x9/0x14
[ 3206.388595] [<ffffffff8108e87d>] ? trace_hardirqs_off_caller+0x1f/0xaa
This happens because when we call btrfs_map_block() from
btrfs_discard_extent() to get a btrfs_bio structure, the device replace
operation has not finished yet, but before we use the device of one of the
stripes from the returned btrfs_bio structure, the device object is freed.
This is illustrated by the following diagram.
CPU 1 CPU 2
btrfs_dev_replace_start()
(...)
btrfs_dev_replace_finishing()
btrfs_start_transaction()
btrfs_commit_transaction()
(...)
btrfs_sync_file()
btrfs_start_transaction()
(...)
btrfs_commit_transaction()
btrfs_finish_extent_commit()
btrfs_discard_extent()
btrfs_map_block()
--> returns a struct btrfs_bio
with a stripe that has a
device field pointing to
source device of the replace
operation (the device that
is being replaced)
mutex_lock(&uuid_mutex)
mutex_lock(&fs_info->fs_devices->device_list_mutex)
mutex_lock(&fs_info->chunk_mutex)
btrfs_dev_replace_update_device_in_mapping_tree()
--> iterates the mapping tree and for each
extent map that has a stripe pointing to
the source device, it updates the stripe
to point to the target device instead
btrfs_rm_dev_replace_blocked()
--> waits for fs_info->bio_counter to go down to 0
btrfs_rm_dev_replace_remove_srcdev()
--> removes source device from the list of devices
mutex_unlock(&fs_info->chunk_mutex)
mutex_unlock(&fs_info->fs_devices->device_list_mutex)
mutex_unlock(&uuid_mutex)
btrfs_rm_dev_replace_free_srcdev()
--> frees the source device
--> iterates over all stripes
of the returned struct
btrfs_bio
--> for each stripe it
dereferences its device
pointer
--> it ends up finding a
pointer to the device
used as the source
device for the replace
operation and that was
already freed
So fix this by surrounding the call to btrfs_map_block(), and the code
that uses the returned struct btrfs_bio, with calls to
btrfs_bio_counter_inc_blocked() and btrfs_bio_counter_dec(), so that
the finishing phase of the device replace operation blocks until the
the bio counter decreases to zero before it frees the source device.
This is the same approach we do at btrfs_map_bio() for example.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
While iterating and copying extents from the source device, the device
replace code keeps adjusting a left cursor that is used to make sure that
once we finish processing a device extent, any future writes to extents
from the corresponding block group will get into both the source and
target devices. This left cursor is also used for resuming the device
replace operation at mount time.
However using this left cursor to decide whether writes go into both
devices or only the source device is not enough to guarantee we don't
miss copying extents into the target device. There are two cases where
the current approach fails. The first one is related to when there are
holes in the device and they get allocated for new block groups while
the device replace operation is iterating the device extents (more on
this explained below). The second one is that when that loop over the
device extents finishes, we start dellaloc, wait for all ordered extents
and then commit the current transaction, we might have got new block
groups allocated that are now using a device extent that has an offset
greater then or equals to the value of the left cursor, in which case
writes to extents belonging to these new block groups will get issued
only to the source device.
For the first case where the current approach of using a left cursor
fails, consider the source device currently has the following layout:
[ extent bg A ] [ hole, unallocated space ] [extent bg B ]
3Gb 4Gb 5Gb
While we are iterating the device extents from the source device using
the commit root of the device tree, the following happens:
CPU 1 CPU 2
<we are at transaction N>
scrub_enumerate_chunks()
--> searches the device tree for
extents belonging to the source
device using the device tree's
commit root
--> 1st iteration finds extent belonging to
block group A
--> sets block group A to RO mode
(btrfs_inc_block_group_ro)
--> sets cursor left to found_key.offset
which is 3Gb
--> scrub_chunk() starts
copies all allocated extents from
block group's A stripe at source
device into target device
btrfs_alloc_chunk()
--> allocates device extent
in the range [4Gb, 5Gb[
from the source device for
a new block group C
extent allocated from block
group C for a direct IO,
buffered write or btree node/leaf
extent is written to, perhaps
in response to a writepages()
call from the VM or directly
through direct IO
the write is made only against
the source device and not against
the target device because the
extent's offset is in the interval
[4Gb, 5Gb[ which is larger then
the value of cursor_left (3Gb)
--> scrub_chunks() finishes
--> updates left cursor from 3Gb to
4Gb
--> btrfs_dec_block_group_ro() sets
block group A back to RW mode
<we are still at transaction N>
--> 2nd iteration finds extent belonging to
block group B - it did not find the new
extent in the range [4Gb, 5Gb[ for block
group C because we are using the device
tree's commit root or even because the
block group's items are not all yet
inserted in the respective btrees, that is,
the block group is still attached to some
transaction handle's new_bgs list and
btrfs_create_pending_block_groups() was
not called yet against that transaction
handle, so the device extent items were
not yet inserted into the devices tree
<we are still at transaction N>
--> so we end not copying anything from the newly
allocated device extent from the source device
to the target device
So fix this by making __btrfs_map_block() always redirect writes to the
target device as well, independently of the left cursor's value. With
this change the left cursor is now used only for the purpose of tracking
progress and allow a mount operation to resume a device replace.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
After it finishes processing a device extent, the device replace code sets
back the block group to RW mode and then after that it sets the left cursor
to match the logical end address of the block group, so that future writes
into extents belonging to the block group go both the source (old) and
target (new) devices. However from the moment we turn the block group
back to RW mode we have a short time window, that lasts until we update
the left cursor's value, where extents can be allocated from the block
group and written to, in which case they will not be copied/written to
the target (new) device. Fix this by updating the left cursor's value
before turning the block group back to RW mode.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
We were assigning new values to fields of the device replace object
without holding the respective lock after processing each device extent.
This is important for the left cursor field which can be accessed by a
concurrent task running __btrfs_map_block (which, correctly, takes the
device replace lock).
So change these fields while holding the device replace lock.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
When we do a device replace, for each device extent we find from the
source device, we set the corresponding block group to readonly mode to
prevent writes into it from happening while we are copying the device
extent from the source to the target device. However just before we set
the block group to readonly mode some concurrent task might have already
allocated an extent from it or decided it could perform a nocow write
into one of its extents, which can make the device replace process to
miss copying an extent since it uses the extent tree's commit root to
search for extents and only once it finishes searching for all extents
belonging to the block group it does set the left cursor to the logical
end address of the block group - this is a problem if the respective
ordered extents finish while we are searching for extents using the
extent tree's commit root and no transaction commit happens while we
are iterating the tree, since it's the delayed references created by the
ordered extents (when they complete) that insert the extent items into
the extent tree (using the non-commit root of course).
Example:
CPU 1 CPU 2
btrfs_dev_replace_start()
btrfs_scrub_dev()
scrub_enumerate_chunks()
--> finds device extent belonging
to block group X
<transaction N starts>
starts buffered write
against some inode
writepages is run against
that inode forcing dellaloc
to run
btrfs_writepages()
extent_writepages()
extent_write_cache_pages()
__extent_writepage()
writepage_delalloc()
run_delalloc_range()
cow_file_range()
btrfs_reserve_extent()
--> allocates an extent
from block group X
(which is not yet
in RO mode)
btrfs_add_ordered_extent()
--> creates ordered extent Y
flush_epd_write_bio()
--> bio against the extent from
block group X is submitted
btrfs_inc_block_group_ro(bg X)
--> sets block group X to readonly
scrub_chunk(bg X)
scrub_stripe(device extent from srcdev)
--> keeps searching for extent items
belonging to the block group using
the extent tree's commit root
--> it never blocks due to
fs_info->scrub_pause_req as no
one tries to commit transaction N
--> copies all extents found from the
source device into the target device
--> finishes search loop
bio completes
ordered extent Y completes
and creates delayed data
reference which will add an
extent item to the extent
tree when run (typically
at transaction commit time)
--> so the task doing the
scrub/device replace
at CPU 1 misses this
and does not copy this
extent into the new/target
device
btrfs_dec_block_group_ro(bg X)
--> turns block group X back to RW mode
dev_replace->cursor_left is set to the
logical end offset of block group X
So fix this by waiting for all cow and nocow writes after setting a block
group to readonly mode.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
When it's finishing, the device replace code iterates all extent maps
representing block group and for each one that has a stripe that refers
to the source device, it replaces its device with the target device.
However when it replaces the source device with the target device it,
the target device still has an ID of 0ULL (BTRFS_DEV_REPLACE_DEVID),
only after its ID is changed to match the one from the source device.
This leads to races with the chunk removal code that can temporarly see
a device with an ID of 0ULL and then attempt to use that ID to remove
items from the device tree and fail, causing a transaction abort:
[ 9238.594364] BTRFS info (device sdf): dev_replace from /dev/sdf (devid 3) to /dev/sde finished
[ 9238.594377] ------------[ cut here ]------------
[ 9238.594402] WARNING: CPU: 14 PID: 21566 at fs/btrfs/volumes.c:2771 btrfs_remove_chunk+0x2e5/0x793 [btrfs]
[ 9238.594403] BTRFS: Transaction aborted (error 1)
[ 9238.594416] Modules linked in: btrfs crc32c_generic acpi_cpufreq xor tpm_tis tpm raid6_pq ppdev parport_pc processor psmouse parport i2c_piix4 evdev sg i2c_core se
rio_raw pcspkr button loop autofs4 ext4 crc16 jbd2 mbcache sr_mod cdrom sd_mod ata_generic virtio_scsi ata_piix virtio_pci libata virtio_ring virtio e1000 scsi_mod fl
oppy [last unloaded: btrfs]
[ 9238.594418] CPU: 14 PID: 21566 Comm: btrfs-cleaner Not tainted 4.6.0-rc7-btrfs-next-29+ #1
[ 9238.594419] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS by qemu-project.org 04/01/2014
[ 9238.594421] 0000000000000000 ffff88017f1dbc60 ffffffff8126b42c ffff88017f1dbcb0
[ 9238.594422] 0000000000000000 ffff88017f1dbca0 ffffffff81052b14 00000ad37f1dbd18
[ 9238.594423] 0000000000000001 ffff88018068a558 ffff88005c4b9c00 ffff880233f60db0
[ 9238.594424] Call Trace:
[ 9238.594428] [<ffffffff8126b42c>] dump_stack+0x67/0x90
[ 9238.594430] [<ffffffff81052b14>] __warn+0xc2/0xdd
[ 9238.594432] [<ffffffff81052b7a>] warn_slowpath_fmt+0x4b/0x53
[ 9238.594434] [<ffffffff8116c311>] ? kmem_cache_free+0x128/0x188
[ 9238.594450] [<ffffffffa04d43f5>] btrfs_remove_chunk+0x2e5/0x793 [btrfs]
[ 9238.594452] [<ffffffff8108e456>] ? arch_local_irq_save+0x9/0xc
[ 9238.594464] [<ffffffffa04a26fa>] btrfs_delete_unused_bgs+0x317/0x382 [btrfs]
[ 9238.594476] [<ffffffffa04a961d>] cleaner_kthread+0x1ad/0x1c7 [btrfs]
[ 9238.594489] [<ffffffffa04a9470>] ? btree_invalidatepage+0x8e/0x8e [btrfs]
[ 9238.594490] [<ffffffff8106f403>] kthread+0xd4/0xdc
[ 9238.594494] [<ffffffff8149e242>] ret_from_fork+0x22/0x40
[ 9238.594495] [<ffffffff8106f32f>] ? kthread_stop+0x286/0x286
[ 9238.594496] ---[ end trace 183efbe50275f059 ]---
The sequence of steps leading to this is like the following:
CPU 1 CPU 2
btrfs_dev_replace_finishing()
at this point
dev_replace->tgtdev->devid ==
BTRFS_DEV_REPLACE_DEVID (0ULL)
...
btrfs_start_transaction()
btrfs_commit_transaction()
btrfs_delete_unused_bgs()
btrfs_remove_chunk()
looks up for the extent map
corresponding to the chunk
lock_chunks() (chunk_mutex)
check_system_chunk()
unlock_chunks() (chunk_mutex)
locks fs_info->chunk_mutex
btrfs_dev_replace_update_device_in_mapping_tree()
--> iterates fs_info->mapping_tree and
replaces the device in every extent
map's map->stripes[] with
dev_replace->tgtdev, which still has
an id of 0ULL (BTRFS_DEV_REPLACE_DEVID)
iterates over all stripes from
the extent map
--> calls btrfs_free_dev_extent()
passing it the target device
that still has an ID of 0ULL
--> btrfs_free_dev_extent() fails
--> aborts current transaction
finishes setting up the target device,
namely it sets tgtdev->devid to the value
of srcdev->devid (which is necessarily > 0)
frees the srcdev
unlocks fs_info->chunk_mutex
So fix this by taking the device list mutex while processing the stripes
for the chunk's extent map. This is similar to the race between device
replace and block group creation that was fixed by commit 50460e3718
("Btrfs: fix race when finishing dev replace leading to transaction abort").
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Pull vfs fixes from Al Viro:
"Followups to the parallel lookup work:
- update docs
- restore killability of the places that used to take ->i_mutex
killably now that we have down_write_killable() merged
- Additionally, it turns out that I missed a prerequisite for
security_d_instantiate() stuff - ->getxattr() wasn't the only thing
that could be called before dentry is attached to inode; with smack
we needed the same treatment applied to ->setxattr() as well"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
switch ->setxattr() to passing dentry and inode separately
switch xattr_handler->set() to passing dentry and inode separately
restore killability of old mutex_lock_killable(&inode->i_mutex) users
add down_write_killable_nested()
update D/f/directory-locking
Pull btrfs cleanups and fixes from Chris Mason:
"We have another round of fixes and a few cleanups.
I have a fix for short returns from btrfs_copy_from_user, which
finally nails down a very hard to find regression we added in v4.6.
Dave is pushing around gfp parameters, mostly to cleanup internal apis
and make it a little more consistent.
The rest are smaller fixes, and one speelling fixup patch"
* 'for-linus-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: (22 commits)
Btrfs: fix handling of faults from btrfs_copy_from_user
btrfs: fix string and comment grammatical issues and typos
btrfs: scrub: Set bbio to NULL before calling btrfs_map_block
Btrfs: fix unexpected return value of fiemap
Btrfs: free sys_array eb as soon as possible
btrfs: sink gfp parameter to convert_extent_bit
btrfs: make state preallocation more speculative in __set_extent_bit
btrfs: untangle gotos a bit in convert_extent_bit
btrfs: untangle gotos a bit in __clear_extent_bit
btrfs: untangle gotos a bit in __set_extent_bit
btrfs: sink gfp parameter to set_record_extent_bits
btrfs: sink gfp parameter to set_extent_new
btrfs: sink gfp parameter to set_extent_defrag
btrfs: sink gfp parameter to set_extent_delalloc
btrfs: sink gfp parameter to clear_extent_dirty
btrfs: sink gfp parameter to clear_record_extent_bits
btrfs: sink gfp parameter to clear_extent_bits
btrfs: sink gfp parameter to set_extent_bits
btrfs: make find_workspace warn if there are no workspaces
btrfs: make find_workspace always succeed
...
We usually call btrfs_put_bbio() when btrfs_map_block() failed,
btrfs_put_bbio() works right whether bbio is a valid value, or NULL.
But there is a exception, in some case, btrfs_map_block() will return
fail without touching *bbio(keeping its original value), and if bbio
was not initialized yet, invalid memory accessing will happened.
Above case is in scrub_missing_raid56_pages(), and similar case in
scrub_raid56_parity().
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs's fiemap is supposed to return 0 on success and return < 0 on
error. however, ret becomes 1 after looking up the last file extent:
btrfs_lookup_file_extent ->
btrfs_search_slot(..., ins_len=0, cow=0)
and if the offset is beyond EOF, we'll get 'path' pointed to the place
of potentail insertion, and ret == 1.
This may confuse applications using ioctl(FIEL_IOC_FIEMAP).
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
While reading sys_chunk_array in superblock, btrfs creates a temporary
extent buffer. Since we don't use it after finishing reading
sys_chunk_array, we don't need to keep it in memory.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Pull btrfs updates from Chris Mason:
"This has our merge window series of cleanups and fixes. These target
a wide range of issues, but do include some important fixes for
qgroups, O_DIRECT, and fsync handling. Jeff Mahoney moved around a
few definitions to make them easier for userland to consume.
Also whiteout support is included now that issues with overlayfs have
been cleared up.
I have one more fix pending for page faults during btrfs_copy_from_user,
but I wanted to get this bulk out the door first"
* 'for-linus-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: (90 commits)
btrfs: fix memory leak during RAID 5/6 device replacement
Btrfs: add semaphore to synchronize direct IO writes with fsync
Btrfs: fix race between block group relocation and nocow writes
Btrfs: fix race between fsync and direct IO writes for prealloc extents
Btrfs: fix number of transaction units for renames with whiteout
Btrfs: pin logs earlier when doing a rename exchange operation
Btrfs: unpin logs if rename exchange operation fails
Btrfs: fix inode leak on failure to setup whiteout inode in rename
btrfs: add support for RENAME_EXCHANGE and RENAME_WHITEOUT
Btrfs: pin log earlier when renaming
Btrfs: unpin log if rename operation fails
Btrfs: don't do unnecessary delalloc flushes when relocating
Btrfs: don't wait for unrelated IO to finish before relocation
Btrfs: fix empty symlink after creating symlink and fsync parent dir
Btrfs: fix for incorrect directory entries after fsync log replay
btrfs: build fixup for qgroup_account_snapshot
btrfs: qgroup: Fix qgroup accounting when creating snapshot
Btrfs: fix fspath error deallocation
btrfs: make find_workspace warn if there are no workspaces
btrfs: make find_workspace always succeed
...
Pull parallel lookup fixups from Al Viro:
"Fix for xfs parallel readdir (turns out the cxfs exposure was not
enough to catch all problems), and a reversion of btrfs back to
->iterate() until the fs/btrfs/delayed-inode.c gets fixed"
* 'work.lookups' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
xfs: concurrent readdir hangs on data buffer locks
Revert "btrfs: switch to ->iterate_shared()"
This reverts commit 972b241f84.
Quoth Chris:
didn't take the delayed inode stuff into account
it got an rbtree of items and it pulls things out
so in shared mode, its hugely racey
sorry, lets revert and fix it for real inside of btrfs
Signed-off-by: Chris Mason <clm@fb.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Pull remaining vfs xattr work from Al Viro:
"The rest of work.xattr (non-cifs conversions)"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
btrfs: Switch to generic xattr handlers
ubifs: Switch to generic xattr handlers
jfs: Switch to generic xattr handlers
jfs: Clean up xattr name mapping
gfs2: Switch to generic xattr handlers
ceph: kill __ceph_removexattr()
ceph: Switch to generic xattr handlers
ceph: Get rid of d_find_alias in ceph_set_acl
The btrfs_{set,remove}xattr inode operations check for a read-only root
(btrfs_root_readonly) before calling into generic_{set,remove}xattr. If
this check is moved into __btrfs_setxattr, we can get rid of
btrfs_{set,remove}xattr.
This patch applies to mainline, I would like to keep it together with
the other xattr cleanups if possible, though. Could you please review?
Thanks,
Andreas
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Pull vfs cleanups from Al Viro:
"More cleanups from Christoph"
* 'work.preadv2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
nfsd: use RWF_SYNC
fs: add RWF_DSYNC aand RWF_SYNC
ceph: use generic_write_sync
fs: simplify the generic_write_sync prototype
fs: add IOCB_SYNC and IOCB_DSYNC
direct-io: remove the offset argument to dio_complete
direct-io: eliminate the offset argument to ->direct_IO
xfs: eliminate the pos variable in xfs_file_dio_aio_write
filemap: remove the pos argument to generic_file_direct_write
filemap: remove pos variables in generic_file_read_iter
A 'struct bio' is allocated in scrub_missing_raid56_pages(), but it was never
freed anywhere.
Signed-off-by: Scott Talbert <scott.talbert@hgst.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Due to the optimization of lockless direct IO writes (the inode's i_mutex
is not held) introduced in commit 38851cc19a ("Btrfs: implement unlocked
dio write"), we started having races between such writes with concurrent
fsync operations that use the fast fsync path. These races were addressed
in the patches titled "Btrfs: fix race between fsync and lockless direct
IO writes" and "Btrfs: fix race between fsync and direct IO writes for
prealloc extents". The races happened because the direct IO path, like
every other write path, does create extent maps followed by the
corresponding ordered extents while the fast fsync path collected first
ordered extents and then it collected extent maps. This made it possible
to log file extent items (based on the collected extent maps) without
waiting for the corresponding ordered extents to complete (get their IO
done). The two fixes mentioned before added a solution that consists of
making the direct IO path create first the ordered extents and then the
extent maps, while the fsync path attempts to collect any new ordered
extents once it collects the extent maps. This was simple and did not
require adding any synchonization primitive to any data structure (struct
btrfs_inode for example) but it makes things more fragile for future
development endeavours and adds an exceptional approach compared to the
other write paths.
This change adds a read-write semaphore to the btrfs inode structure and
makes the direct IO path create the extent maps and the ordered extents
while holding read access on that semaphore, while the fast fsync path
collects extent maps and ordered extents while holding write access on
that semaphore. The logic for direct IO write path is encapsulated in a
new helper function that is used both for cow and nocow direct IO writes.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Relocation of a block group waits for all existing tasks flushing
dellaloc, starting direct IO writes and any ordered extents before
starting the relocation process. However for direct IO writes that end
up doing nocow (inode either has the flag nodatacow set or the write is
against a prealloc extent) we have a short time window that allows for a
race that makes relocation proceed without waiting for the direct IO
write to complete first, resulting in data loss after the relocation
finishes. This is illustrated by the following diagram:
CPU 1 CPU 2
btrfs_relocate_block_group(bg X)
direct IO write starts against
an extent in block group X
using nocow mode (inode has the
nodatacow flag or the write is
for a prealloc extent)
btrfs_direct_IO()
btrfs_get_blocks_direct()
--> can_nocow_extent() returns 1
btrfs_inc_block_group_ro(bg X)
--> turns block group into RO mode
btrfs_wait_ordered_roots()
--> returns and does not know about
the DIO write happening at CPU 2
(the task there has not created
yet an ordered extent)
relocate_block_group(bg X)
--> rc->stage == MOVE_DATA_EXTENTS
find_next_extent()
--> returns extent that the DIO
write is going to write to
relocate_data_extent()
relocate_file_extent_cluster()
--> reads the extent from disk into
pages belonging to the relocation
inode and dirties them
--> creates DIO ordered extent
btrfs_submit_direct()
--> submits bio against a location
on disk obtained from an extent
map before the relocation started
btrfs_wait_ordered_range()
--> writes all the pages read before
to disk (belonging to the
relocation inode)
relocation finishes
bio completes and wrote new data
to the old location of the block
group
So fix this by tracking the number of nocow writers for a block group and
make sure relocation waits for that number to go down to 0 before starting
to move the extents.
The same race can also happen with buffered writes in nocow mode since the
patch I recently made titled "Btrfs: don't do unnecessary delalloc flushes
when relocating", because we are no longer flushing all delalloc which
served as a synchonization mechanism (due to page locking) and ensured
the ordered extents for nocow buffered writes were created before we
called btrfs_wait_ordered_roots(). The race with direct IO writes in nocow
mode existed before that patch (no pages are locked or used during direct
IO) and that fixed only races with direct IO writes that do cow.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
When we do a direct IO write against a preallocated extent (fallocate)
that does not go beyond the i_size of the inode, we do the write operation
without holding the inode's i_mutex (an optimization that landed in
commit 38851cc19a ("Btrfs: implement unlocked dio write")). This allows
for a very tiny time window where a race can happen with a concurrent
fsync using the fast code path, as the direct IO write path creates first
a new extent map (no longer flagged as a prealloc extent) and then it
creates the ordered extent, while the fast fsync path first collects
ordered extents and then it collects extent maps. This allows for the
possibility of the fast fsync path to collect the new extent map without
collecting the new ordered extent, and therefore logging an extent item
based on the extent map without waiting for the ordered extent to be
created and complete. This can result in a situation where after a log
replay we end up with an extent not marked anymore as prealloc but it was
only partially written (or not written at all), exposing random, stale or
garbage data corresponding to the unwritten pages and without any
checksums in the csum tree covering the extent's range.
This is an extension of what was done in commit de0ee0edb2 ("Btrfs: fix
race between fsync and lockless direct IO writes").
So fix this by creating first the ordered extent and then the extent
map, so that this way if the fast fsync patch collects the new extent
map it also collects the corresponding ordered extent.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
When we do a rename with the whiteout flag, we need to create the whiteout
inode, which in the worst case requires 5 transaction units (1 inode item,
1 inode ref, 2 dir items and 1 xattr if selinux is enabled). So bump the
number of transaction units from 11 to 16 if the whiteout flag is set.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
The btrfs_rename_exchange() started as a copy-paste from btrfs_rename(),
which had a race fixed by my previous patch titled "Btrfs: pin log earlier
when renaming", and so it suffers from the same problem.
We pin the logs of the affected roots after we insert the new inode
references, leaving a time window where concurrent tasks logging the
inodes can end up logging both the new and old references, resulting
in log trees that when replayed can turn the metadata into inconsistent
states. This behaviour was added to btrfs_rename() in 2009 without any
explanation about why not pinning the logs earlier, just leaving a
comment about the posibility for the race. As of today it's perfectly
safe and sane to pin the logs before we start doing any of the steps
involved in the rename operation.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
If rename exchange operations fail at some point after we pinned any of
the logs, we end up aborting the current transaction but never unpin the
logs, which leaves concurrent tasks that are trying to sync the logs (as
part of an fsync request from user space) blocked forever and preventing
the filesystem from being unmountable.
Fix this by safely unpinning the log.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
If we failed to fully setup the whiteout inode during a rename operation
with the whiteout flag, we ended up leaking the inode, not decrementing
its link count nor removing all its items from the fs/subvol tree.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Two new flags, RENAME_EXCHANGE and RENAME_WHITEOUT, provide for new
behavior in the renameat2() syscall. This behavior is primarily used by
overlayfs. This patch adds support for these flags to btrfs, enabling it to
be used as a fully functional upper layer for overlayfs.
RENAME_EXCHANGE support was written by Davide Italiano originally
submitted on 2 April 2015.
Signed-off-by: Davide Italiano <dccitaliano@gmail.com>
Signed-off-by: Dan Fuhry <dfuhry@datto.com>
[ remove unlikely ]
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
We were pinning the log right after the first step in the rename operation
(inserting inode ref for the new name in the destination directory)
instead of doing it before. This behaviour was introduced in 2009 for some
reason that was not mentioned neither on the changelog nor any comment,
with the drawback of a small time window where concurrent log writers can
end up logging the new inode reference for the inode we are renaming while
the rename operation is in progress (so that we can end up with a log
containing both the new and old references). As of today there's no reason
to not pin the log before that first step anymore, so just fix this.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
If rename operations fail at some point after we pinned the log, we end
up aborting the current transaction but never unpin the log, which leaves
concurrent tasks that are trying to sync the log (as part of an fsync
request from user space) blocked forever and preventing the filesystem
from being unmountable.
Fix this by safely unpinning the log.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Before we start the actual relocation process of a block group, we do
calls to flush delalloc of all inodes and then wait for ordered extents
to complete. However we do these flush calls just to make sure we don't
race with concurrent tasks that have actually already started to run
delalloc and have allocated an extent from the block group we want to
relocate, right before we set it to readonly mode, but have not yet
created the respective ordered extents. The flush calls make us wait
for such concurrent tasks because they end up calling
filemap_fdatawrite_range() (through btrfs_start_delalloc_roots() ->
__start_delalloc_inodes() -> btrfs_alloc_delalloc_work() ->
btrfs_run_delalloc_work()) which ends up serializing us with those tasks
due to attempts to lock the same pages (and the delalloc flush procedure
calls the allocator and creates the ordered extents before unlocking the
pages).
These flushing calls not only make us waste time (cpu, IO) but also reduce
the chances of writing larger extents (applications might be writing to
contiguous ranges and we flush before they finish dirtying the whole
ranges).
So make sure we don't flush delalloc and just wait for concurrent tasks
that have already started flushing delalloc and have allocated an extent
from the block group we are about to relocate.
This change also ends up fixing a race with direct IO writes that makes
relocation not wait for direct IO ordered extents. This race is
illustrated by the following diagram:
CPU 1 CPU 2
btrfs_relocate_block_group(bg X)
starts direct IO write,
target inode currently has no
ordered extents ongoing nor
dirty pages (delalloc regions),
therefore the root for our inode
is not in the list
fs_info->ordered_roots
btrfs_direct_IO()
__blockdev_direct_IO()
btrfs_get_blocks_direct()
btrfs_lock_extent_direct()
locks range in the io tree
btrfs_new_extent_direct()
btrfs_reserve_extent()
--> extent allocated
from bg X
btrfs_inc_block_group_ro(bg X)
btrfs_start_delalloc_roots()
__start_delalloc_inodes()
--> does nothing, no dealloc ranges
in the inode's io tree so the
inode's root is not in the list
fs_info->delalloc_roots
btrfs_wait_ordered_roots()
--> does not find the inode's root in the
list fs_info->ordered_roots
--> ends up not waiting for the direct IO
write started by the task at CPU 2
relocate_block_group(rc->stage ==
MOVE_DATA_EXTENTS)
prepare_to_relocate()
btrfs_commit_transaction()
iterates the extent tree, using its
commit root and moves extents into new
locations
btrfs_add_ordered_extent_dio()
--> now a ordered extent is
created and added to the
list root->ordered_extents
and the root added to the
list fs_info->ordered_roots
--> this is too late and the
task at CPU 1 already
started the relocation
btrfs_commit_transaction()
btrfs_finish_ordered_io()
btrfs_alloc_reserved_file_extent()
--> adds delayed data reference
for the extent allocated
from bg X
relocate_block_group(rc->stage ==
UPDATE_DATA_PTRS)
prepare_to_relocate()
btrfs_commit_transaction()
--> delayed refs are run, so an extent
item for the allocated extent from
bg X is added to extent tree
--> commit roots are switched, so the
next scan in the extent tree will
see the extent item
sees the extent in the extent tree
When this happens the relocation produces the following warning when it
finishes:
[ 7260.832836] ------------[ cut here ]------------
[ 7260.834653] WARNING: CPU: 5 PID: 6765 at fs/btrfs/relocation.c:4318 btrfs_relocate_block_group+0x245/0x2a1 [btrfs]()
[ 7260.838268] Modules linked in: btrfs crc32c_generic xor ppdev raid6_pq psmouse sg acpi_cpufreq evdev i2c_piix4 tpm_tis serio_raw tpm i2c_core pcspkr parport_pc
[ 7260.850935] CPU: 5 PID: 6765 Comm: btrfs Not tainted 4.5.0-rc6-btrfs-next-28+ #1
[ 7260.852998] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS by qemu-project.org 04/01/2014
[ 7260.852998] 0000000000000000 ffff88020bf57bc0 ffffffff812648b3 0000000000000000
[ 7260.852998] 0000000000000009 ffff88020bf57bf8 ffffffff81051608 ffffffffa03c1b2d
[ 7260.852998] ffff8800b2bbb800 0000000000000000 ffff8800b17bcc58 ffff8800399dd000
[ 7260.852998] Call Trace:
[ 7260.852998] [<ffffffff812648b3>] dump_stack+0x67/0x90
[ 7260.852998] [<ffffffff81051608>] warn_slowpath_common+0x99/0xb2
[ 7260.852998] [<ffffffffa03c1b2d>] ? btrfs_relocate_block_group+0x245/0x2a1 [btrfs]
[ 7260.852998] [<ffffffff810516d4>] warn_slowpath_null+0x1a/0x1c
[ 7260.852998] [<ffffffffa03c1b2d>] btrfs_relocate_block_group+0x245/0x2a1 [btrfs]
[ 7260.852998] [<ffffffffa039d9de>] btrfs_relocate_chunk.isra.29+0x66/0xdb [btrfs]
[ 7260.852998] [<ffffffffa039f314>] btrfs_balance+0xde1/0xe4e [btrfs]
[ 7260.852998] [<ffffffff8127d671>] ? debug_smp_processor_id+0x17/0x19
[ 7260.852998] [<ffffffffa03a9583>] btrfs_ioctl_balance+0x255/0x2d3 [btrfs]
[ 7260.852998] [<ffffffffa03ac96a>] btrfs_ioctl+0x11e0/0x1dff [btrfs]
[ 7260.852998] [<ffffffff811451df>] ? handle_mm_fault+0x443/0xd63
[ 7260.852998] [<ffffffff81491817>] ? _raw_spin_unlock+0x31/0x44
[ 7260.852998] [<ffffffff8108b36a>] ? arch_local_irq_save+0x9/0xc
[ 7260.852998] [<ffffffff811876ab>] vfs_ioctl+0x18/0x34
[ 7260.852998] [<ffffffff81187cb2>] do_vfs_ioctl+0x550/0x5be
[ 7260.852998] [<ffffffff81190c30>] ? __fget_light+0x4d/0x71
[ 7260.852998] [<ffffffff81187d77>] SyS_ioctl+0x57/0x79
[ 7260.852998] [<ffffffff81492017>] entry_SYSCALL_64_fastpath+0x12/0x6b
[ 7260.893268] ---[ end trace eb7803b24ebab8ad ]---
This is because at the end of the first stage, in relocate_block_group(),
we commit the current transaction, which makes delayed refs run, the
commit roots are switched and so the second stage will find the extent
item that the ordered extent added to the delayed refs. But this extent
was not moved (ordered extent completed after first stage finished), so
at the end of the relocation our block group item still has a positive
used bytes counter, triggering a warning at the end of
btrfs_relocate_block_group(). Later on when trying to read the extent
contents from disk we hit a BUG_ON() due to the inability to map a block
with a logical address that belongs to the block group we relocated and
is no longer valid, resulting in the following trace:
[ 7344.885290] BTRFS critical (device sdi): unable to find logical 12845056 len 4096
[ 7344.887518] ------------[ cut here ]------------
[ 7344.888431] kernel BUG at fs/btrfs/inode.c:1833!
[ 7344.888431] invalid opcode: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC
[ 7344.888431] Modules linked in: btrfs crc32c_generic xor ppdev raid6_pq psmouse sg acpi_cpufreq evdev i2c_piix4 tpm_tis serio_raw tpm i2c_core pcspkr parport_pc
[ 7344.888431] CPU: 0 PID: 6831 Comm: od Tainted: G W 4.5.0-rc6-btrfs-next-28+ #1
[ 7344.888431] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS by qemu-project.org 04/01/2014
[ 7344.888431] task: ffff880215818600 ti: ffff880204684000 task.ti: ffff880204684000
[ 7344.888431] RIP: 0010:[<ffffffffa037c88c>] [<ffffffffa037c88c>] btrfs_merge_bio_hook+0x54/0x6b [btrfs]
[ 7344.888431] RSP: 0018:ffff8802046878f0 EFLAGS: 00010282
[ 7344.888431] RAX: 00000000ffffffea RBX: 0000000000001000 RCX: 0000000000000001
[ 7344.888431] RDX: ffff88023ec0f950 RSI: ffffffff8183b638 RDI: 00000000ffffffff
[ 7344.888431] RBP: ffff880204687908 R08: 0000000000000001 R09: 0000000000000000
[ 7344.888431] R10: ffff880204687770 R11: ffffffff82f2d52d R12: 0000000000001000
[ 7344.888431] R13: ffff88021afbfee8 R14: 0000000000006208 R15: ffff88006cd199b0
[ 7344.888431] FS: 00007f1f9e1d6700(0000) GS:ffff88023ec00000(0000) knlGS:0000000000000000
[ 7344.888431] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 7344.888431] CR2: 00007f1f9dc8cb60 CR3: 000000023e3b6000 CR4: 00000000000006f0
[ 7344.888431] Stack:
[ 7344.888431] 0000000000001000 0000000000001000 ffff880204687b98 ffff880204687950
[ 7344.888431] ffffffffa0395c8f ffffea0004d64d48 0000000000000000 0000000000001000
[ 7344.888431] ffffea0004d64d48 0000000000001000 0000000000000000 0000000000000000
[ 7344.888431] Call Trace:
[ 7344.888431] [<ffffffffa0395c8f>] submit_extent_page+0xf5/0x16f [btrfs]
[ 7344.888431] [<ffffffffa03970ac>] __do_readpage+0x4a0/0x4f1 [btrfs]
[ 7344.888431] [<ffffffffa039680d>] ? btrfs_create_repair_bio+0xcb/0xcb [btrfs]
[ 7344.888431] [<ffffffffa037eeb4>] ? btrfs_writepage_start_hook+0xbc/0xbc [btrfs]
[ 7344.888431] [<ffffffff8108df55>] ? trace_hardirqs_on+0xd/0xf
[ 7344.888431] [<ffffffffa039728c>] __do_contiguous_readpages.constprop.26+0xc2/0xe4 [btrfs]
[ 7344.888431] [<ffffffffa037eeb4>] ? btrfs_writepage_start_hook+0xbc/0xbc [btrfs]
[ 7344.888431] [<ffffffffa039739b>] __extent_readpages.constprop.25+0xed/0x100 [btrfs]
[ 7344.888431] [<ffffffff81129d24>] ? lru_cache_add+0xe/0x10
[ 7344.888431] [<ffffffffa0397ea8>] extent_readpages+0x160/0x1aa [btrfs]
[ 7344.888431] [<ffffffffa037eeb4>] ? btrfs_writepage_start_hook+0xbc/0xbc [btrfs]
[ 7344.888431] [<ffffffff8115daad>] ? alloc_pages_current+0xa9/0xcd
[ 7344.888431] [<ffffffffa037cdc9>] btrfs_readpages+0x1f/0x21 [btrfs]
[ 7344.888431] [<ffffffff81128316>] __do_page_cache_readahead+0x168/0x1fc
[ 7344.888431] [<ffffffff811285a0>] ondemand_readahead+0x1f6/0x207
[ 7344.888431] [<ffffffff811285a0>] ? ondemand_readahead+0x1f6/0x207
[ 7344.888431] [<ffffffff8111cf34>] ? pagecache_get_page+0x2b/0x154
[ 7344.888431] [<ffffffff8112870e>] page_cache_sync_readahead+0x3d/0x3f
[ 7344.888431] [<ffffffff8111dbf7>] generic_file_read_iter+0x197/0x4e1
[ 7344.888431] [<ffffffff8117773a>] __vfs_read+0x79/0x9d
[ 7344.888431] [<ffffffff81178050>] vfs_read+0x8f/0xd2
[ 7344.888431] [<ffffffff81178a38>] SyS_read+0x50/0x7e
[ 7344.888431] [<ffffffff81492017>] entry_SYSCALL_64_fastpath+0x12/0x6b
[ 7344.888431] Code: 8d 4d e8 45 31 c9 45 31 c0 48 8b 00 48 c1 e2 09 48 8b 80 80 fc ff ff 4c 89 65 e8 48 8b b8 f0 01 00 00 e8 1d 42 02 00 85 c0 79 02 <0f> 0b 4c 0
[ 7344.888431] RIP [<ffffffffa037c88c>] btrfs_merge_bio_hook+0x54/0x6b [btrfs]
[ 7344.888431] RSP <ffff8802046878f0>
[ 7344.970544] ---[ end trace eb7803b24ebab8ae ]---
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Before the relocation process of a block group starts, it sets the block
group to readonly mode, then flushes all delalloc writes and then finally
it waits for all ordered extents to complete. This last step includes
waiting for ordered extents destinated at extents allocated in other block
groups, making us waste unecessary time.
So improve this by waiting only for ordered extents that fall into the
block group's range.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
If we create a symlink, fsync its parent directory, crash/power fail and
mount the filesystem, we end up with an empty symlink, which not only is
useless it's also not allowed in linux (the man page symlink(2) is well
explicit about that). So we just need to make sure to fully log an inode
if it's a symlink, to ensure its inline extent gets logged, ensuring the
same behaviour as ext3, ext4, xfs, reiserfs, f2fs, nilfs2, etc.
Example reproducer:
$ mkfs.btrfs -f /dev/sdb
$ mount /dev/sdb /mnt
$ mkdir /mnt/testdir
$ sync
$ ln -s /mnt/foo /mnt/testdir/bar
$ xfs_io -c fsync /mnt/testdir
<power fail>
$ mount /dev/sdb /mnt
$ readlink /mnt/testdir/bar
<empty string>
A test case for fstests follows soon.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
If we move a directory to a new parent and later log that parent and don't
explicitly log the old parent, when we replay the log we can end up with
entries for the moved directory in both the old and new parent directories.
Besides being ilegal to have directories with multiple hard links in linux,
it also resulted in the leaving the inode item with a link count of 1.
A similar issue also happens if we move a regular file - after the log tree
is replayed the file has a link in both the old and new parent directories,
when it should be only at the new directory.
Sample reproducer:
$ mkfs.btrfs -f /dev/sdc
$ mount /dev/sdc /mnt
$ mkdir /mnt/x
$ mkdir /mnt/y
$ touch /mnt/x/foo
$ mkdir /mnt/y/z
$ sync
$ ln /mnt/x/foo /mnt/x/bar
$ mv /mnt/y/z /mnt/x/z
< power fail >
$ mount /dev/sdc /mnt
$ ls -1Ri /mnt
/mnt:
257 x
258 y
/mnt/x:
259 bar
259 foo
260 z
/mnt/x/z:
/mnt/y:
260 z
/mnt/y/z:
$ umount /dev/sdc
$ btrfs check /dev/sdc
Checking filesystem on /dev/sdc
UUID: a67e2c4a-a4b4-4fdc-b015-9d9af1e344be
checking extents
checking free space cache
checking fs roots
root 5 inode 260 errors 2000, link count wrong
unresolved ref dir 257 index 4 namelen 1 name z filetype 2 errors 0
unresolved ref dir 258 index 2 namelen 1 name z filetype 2 errors 0
(...)
Attempting to remove the directory becomes impossible:
$ mount /dev/sdc /mnt
$ rmdir /mnt/y/z
$ ls -lh /mnt/y
ls: cannot access /mnt/y/z: No such file or directory
total 0
d????????? ? ? ? ? ? z
$ rmdir /mnt/x/z
rmdir: failed to remove ‘/mnt/x/z’: Stale file handle
$ ls -lh /mnt/x
ls: cannot access /mnt/x/z: Stale file handle
total 0
-rw-r--r-- 2 root root 0 Apr 6 18:06 bar
-rw-r--r-- 2 root root 0 Apr 6 18:06 foo
d????????? ? ? ? ? ? z
So make sure that on rename we set the last_unlink_trans value for our
inode, even if it's a directory, to the value of the current transaction's
ID and that if the new parent directory is logged that we fallback to a
transaction commit.
A test case for fstests is being submitted as well.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
The macro btrfs_std_error got renamed to btrfs_handle_fs_error in an
independent branch for the same merge target (4.7). To make the code
compilable for bisectability reasons, add a temporary stub.
Signed-off-by: David Sterba <dsterba@suse.com>
Current btrfs qgroup design implies a requirement that after calling
btrfs_qgroup_account_extents() there must be a commit root switch.
Normally this is OK, as btrfs_qgroup_accounting_extents() is only called
inside btrfs_commit_transaction() just be commit_cowonly_roots().
However there is a exception at create_pending_snapshot(), which will
call btrfs_qgroup_account_extents() but no any commit root switch.
In case of creating a snapshot whose parent root is itself (create a
snapshot of fs tree), it will corrupt qgroup by the following trace:
(skipped unrelated data)
======
btrfs_qgroup_account_extent: bytenr = 29786112, num_bytes = 16384, nr_old_roots = 0, nr_new_roots = 1
qgroup_update_counters: qgid = 5, cur_old_count = 0, cur_new_count = 1, rfer = 0, excl = 0
qgroup_update_counters: qgid = 5, cur_old_count = 0, cur_new_count = 1, rfer = 16384, excl = 16384
btrfs_qgroup_account_extent: bytenr = 29786112, num_bytes = 16384, nr_old_roots = 0, nr_new_roots = 0
======
The problem here is in first qgroup_account_extent(), the
nr_new_roots of the extent is 1, which means its reference got
increased, and qgroup increased its rfer and excl.
But at second qgroup_account_extent(), its reference got decreased, but
between these two qgroup_account_extent(), there is no switch roots.
This leads to the same nr_old_roots, and this extent just got ignored by
qgroup, which means this extent is wrongly accounted.
Fix it by call commit_cowonly_roots() after qgroup_account_extent() in
create_pending_snapshot(), with needed preparation.
Mark: I added a check at the top of qgroup_account_snapshot() to skip this
code if qgroups are turned off. xfstest btrfs/122 exposes this problem.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.de>
Signed-off-by: David Sterba <dsterba@suse.com>
Make sure to deallocate fspath with vfree() in case of error in
init_ipath().
fspath is allocated with vmalloc() in init_data_container() since
commit 425d17a290 ("Btrfs: use larger limit for translation of logical to
inode").
Signed-off-by: Vincent Stehlé <vincent.stehle@intel.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
With just one preallocated workspace we can guarantee forward progress
even if there's no memory available for new workspaces. The cost is more
waiting but we also get rid of several error paths.
On average, there will be several idle workspaces, so the waiting
penalty won't be so bad.
In the worst case, all cpus will compete for one workspace until there's
some memory. Attempts to allocate a new one are done each time the
waiters are woken up.
Signed-off-by: David Sterba <dsterba@suse.com>
Preallocate one workspace for each compression type so we can guarantee
forward progress in the worst case. A failure cannot be a hard error as
we might not use compression at all on the filesystem. If we can't
allocate the workspaces later when need them, it might actually
deadlock, but in such situation the system has effectively not enough
memory to operate properly.
Signed-off-by: David Sterba <dsterba@suse.com>
Currently we lack the identification of the filesystem in most if not
all mount messages, done via printk/pr_* functions. We can use the
btrfs_* helpers in open_ctree, as the fs_info <-> sb link is established
at the beginning of the function.
The messages have been updated at the same time to be more consistent:
* dropped sb->s_id, as it's not available via btrfs_*
* added %d for return code where appropriate
* wording changed
* %Lx replaced by %llx
Signed-off-by: David Sterba <dsterba@suse.com>
UBSAN: Undefined behaviour in fs/btrfs/extent-tree.c:4623:21
signed integer overflow:
10808 * 262144 cannot be represented in type 'int [8]'
If 8192<=items<16384, we request a writeback of an insane number of pages
which is benign (everything will be written). But if items>=16384, the
space reservation won't be enough.
Signed-off-by: Adam Borowski <kilobyte@angband.pl>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
During a mount, we start the cleaner kthread first because the transaction
kthread wants to wake up the cleaner kthread. We start the transaction
kthread next because everything in btrfs wants transactions. We do reloc
recovery in the thread that was doing the original mount call once the
transaction kthread is running. This means that the cleaner kthread
could already be running when reloc recovery happens (e.g. if a snapshot
delete was started before a crash).
Relocation does not play well with the cleaner kthread, so a mutex was
added in commit 5f3164813b "Btrfs: fix
race between balance recovery and root deletion" to prevent both from
being active at the same time.
If the cleaner kthread is already holding the mutex by the time we get
to btrfs_recover_relocation, the mount will be blocked until at least
one deleted subvolume is cleaned (possibly more if the mount process
doesn't get the lock right away). During this time (which could be an
arbitrarily long time on a large/slow filesystem), the mount process is
stuck and the filesystem is unnecessarily inaccessible.
Fix this by locking cleaner_mutex before we start cleaner_kthread, and
unlocking the mutex after mount no longer requires it. This ensures
that the mounting process will not be blocked by the cleaner kthread.
The cleaner kthread is already prepared for mutex contention and will
just go to sleep until the mutex is available.
Signed-off-by: Zygo Blaxell <ce3g8jdj@umail.furryterror.org>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
pagev array in scrub_block{} is of size SCRUB_MAX_PAGES_PER_BLOCK.
page_index should be checked with the same to trigger BUG_ON().
Signed-off-by: Ashish Samant <ashish.samant@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_map_block can go horribly wrong in the face of fs corruption, lets agree
to not be assholes and panic at any possible chance things are all fucked up.
Signed-off-by: Josef Bacik <jbacik@fb.com>
[ removed type casts ]
Signed-off-by: David Sterba <dsterba@suse.com>
The struct 'map_lookup' uses type int for @stripe_len, while
btrfs_chunk_stripe_len() can return a u64 value, and it may end up with
@stripe_len being undefined value and it can lead to 'divide error' in
__btrfs_map_block().
This changes 'map_lookup' to use type u64 for stripe_len, also right now
we only use BTRFS_STRIPE_LEN for stripe_len, so this adds a valid checker for
BTRFS_STRIPE_LEN.
Reported-by: Vegard Nossum <vegard.nossum@oracle.com>
Reported-by: Quentin Casasnovas <quentin.casasnovas@oracle.com>
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ folded division fix to scrub_raid56_parity ]
Signed-off-by: David Sterba <dsterba@suse.com>
If the label setting ioctl races with sysfs label handler, we could get
mixed result in the output, part old part new. We should either get the
old or new label. The chances to hit this race are low.
Signed-off-by: David Sterba <dsterba@suse.com>
Add a sanity check for the fs_info as we will dereference it, similar to
what the 'store features' handler does.
Signed-off-by: David Sterba <dsterba@suse.com>
The key variable occupies 17 bytes, the key_start is used once, we can
simply reuse existing 'key' for that purpose. As the key is not a simple
type, compiler doest not do it on itself.
Signed-off-by: David Sterba <dsterba@suse.com>
The size of root item is more than 400 bytes, which is quite a lot of
stack space. As we do IO from inside the subvolume ioctls, we should
keep the stack usage low in case the filesystem is on top of other
layers (NFS, device mapper, iscsi, etc).
Reviewed-by: Tsutomu Itoh <t-itoh@jp.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The "sizeof(*arg->clone_sources) * arg->clone_sources_count" expression
can overflow. It causes several static checker warnings. It's all
under CAP_SYS_ADMIN so it's not that serious but lets silence the
warnings.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Since mixed block groups accounting isn't byte-accurate and f_bree is an
unsigned integer, it could overflow. Avoid this.
Signed-off-by: Luis de Bethencourt <luisbg@osg.samsung.com>
Suggested-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Metadata for mixed block is already accounted in total data and should not
be counted as part of the free metadata space.
Signed-off-by: Luis de Bethencourt <luisbg@osg.samsung.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=114281
Signed-off-by: David Sterba <dsterba@suse.com>
Currently, we don't allow the user to try and rebalance to a dup profile
on a multi-device filesystem. In most cases, this is a perfectly sensible
restriction as raid1 uses the same amount of space and provides better
protection.
However, when reshaping a multi-device filesystem down to a single device
filesystem, this requires the user to convert metadata and system chunks
to single profile before deleting devices, and then convert again to dup,
which leaves a period of time where metadata integrity is reduced.
This patch removes the single-device-only restriction from converting to
dup profile to remove this potential data integrity reduction.
Signed-off-by: Austin S. Hemmelgarn <ahferroin7@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
It seems to be long time unused, since 2008 and
6885f308b5 ("Btrfs: Misc 2.6.25 updates").
Propagating the removal touches some code but has no functional effect.
Signed-off-by: David Sterba <dsterba@suse.com>
Creates helper fucntion as needed by the device delete
and replace operations. Also now it checks if the next
device being assigned is an active device.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Yauhen reported in the ML that s_bdev is null at mount, and
s_bdev gets updated to some device when missing device is
replaced, as because bdev is null for missing device, things
gets matched up. Fix this by checking if s_bdev is set. I
didn't want to completely remove updating s_bdev because
the future multi device support at vfs layer may need it.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reported-by: Yauhen Kharuzhy <yauhen.kharuzhy@zavadatar.com>
Signed-off-by: David Sterba <dsterba@suse.com>
ta-da!
The main issue is the lack of down_write_killable(), so the places
like readdir.c switched to plain inode_lock(); once killable
variants of rwsem primitives appear, that'll be dealt with.
lockdep side also might need more work
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
The kiocb already has the new position, so use that. The only interesting
case is AIO, where we currently don't bother updating ki_pos. We're about
to free the kiocb after we're done, so we might as well update it to make
everyone's life simpler.
While we're at it also return the bytes written argument passed in if
we were successful so that the boilerplate error switch code in the
callers can go away.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
This will allow us to do per-I/O sync file writes, as required by a lot
of fileservers or storage targets.
XXX: Will need a few additional audits for O_DSYNC
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Including blkdev_direct_IO and dax_do_io. It has to be ki_pos to actually
work, so eliminate the superflous argument.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Single caller passes GFP_NOFS. We can get rid of the
gfpflags_allow_blocking checks as NOFS can block but does not recurse to
filesystem through reclaim.
Signed-off-by: David Sterba <dsterba@suse.com>
Similar to __clear_extent_bit, do not fail if the state preallocation
fails as we might not need it. One less BUG_ON.
Signed-off-by: David Sterba <dsterba@suse.com>
Callers pass GFP_NOFS and tests pass GFP_KERNEL, but using NOFS there
does not hurt. No need to pass the flags around.
Signed-off-by: David Sterba <dsterba@suse.com>
The BTRFS_IOC_SEARCH_TREE ioctl returns file system items directly
to userspace. In order to decode them, full type information is required.
Create a new header, btrfs_tree to contain these since most users won't
need them.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
struct btrfs_ioctl_defrag_range_args is used by the BTRFS_IOC_DEFRAG_RANGE
ioctl.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The BTRFS_BALANCE_* flags are used by struct btrfs_ioctl_balance_args.flags
and btrfs_ioctl_balance_args.{data,meta,sys}.flags in the BTRFS_IOC_BALANCE
ioctl.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The compat/compat_ro/incompat feature flags are used by the feature set/get
ioctls.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The BTRFS_QGROUP_LIMIT_* flags are required to tell the kernel which
fields are valid when using the BTRFS_IOC_QGROUP_LIMIT ioctl.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
BTRFS_LABEL_SIZE is required to define the BTRFS_IOC_GET_FSLABEL and
BTRFS_IOC_SET_FSLABEL ioctls.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
A refactor patch, and avoids user input verification in the
btrfs_dev_replace_start(), and so this function can be reused.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Local variable fs_info, contains root->fs_info, use it.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Rename BTRFS_DEVICE_BY_ID so it's more descriptive that we specify the
device by id, it'll be part of the public API. The mask of supported
flags is also renamed, only for internal use.
The error code for unknown flags is EOPNOTSUPP, fixed.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
For clarity how we are going to find the device, let's call it a device
specifier, devspec for short. Also rename the arguments that are a
leftover from previous function purpose.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We should avoid duplicating the device constraints, let's use the
btrfs_raid_array in btrfs_check_raid_min_devices.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Before this patch, btrfs_check_raid_min_devices would do an off-by-one
check of the constraints and not the miminmum check, as its name
suggests. This is not a problem if the only caller is device remove, but
would be confusing for others.
Add an argument with the exact number and let the caller(s) decide if
this needs any adjustments, like when device replace is running.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Tested-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Underscores are for special functions, use the full prefix for better
stacktrace recognition.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Optimize check for stale device to only be checked when there is device
added or changed. If there is no update to the device, there is no need
to call btrfs_free_stale_device().
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This introduces new ioctl BTRFS_IOC_RM_DEV_V2, which uses enhanced struct
btrfs_ioctl_vol_args_v2 to carry devid as an user argument.
The patch won't delete the old ioctl interface and so kernel remains
backward compatible with user land progs.
Test case/script:
echo "0 $(blockdev --getsz /dev/sdf) linear /dev/sdf 0" | dmsetup create bad_disk
mkfs.btrfs -f -d raid1 -m raid1 /dev/sdd /dev/sde /dev/mapper/bad_disk
mount /dev/sdd /btrfs
dmsetup suspend bad_disk
echo "0 $(blockdev --getsz /dev/sdf) error /dev/sdf 0" | dmsetup load bad_disk
dmsetup resume bad_disk
echo "bad disk failed. now deleting/replacing"
btrfs dev del 3 /btrfs
echo $?
btrfs fi show /btrfs
umount /btrfs
btrfs-show-super /dev/sdd | egrep num_device
dmsetup remove bad_disk
wipefs -a /dev/sdf
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reported-by: Martin <m_btrfs@ml1.co.uk>
[ adjust messages, s/disk/device/ ]
Signed-off-by: David Sterba <dsterba@suse.com>
With the previous patches now the btrfs_scratch_superblocks() is ready to
be used in btrfs_rm_device() so use it.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
[ use GFP_KERNEL ]
Signed-off-by: David Sterba <dsterba@suse.com>
The operation of device replace and device delete follows same steps upto
some depth with in btrfs kernel, however they don't share codes. This
enhancement will help replace and delete to share codes.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_rm_device() has a section of the code which can be replaced
btrfs_find_device_by_user_input()
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The patch renames btrfs_dev_replace_find_srcdev() to
btrfs_find_device_by_user_input() and moves it to volumes.c, so that
delete device can use it.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
__check_raid_min_device() which was pealed from btrfs_rm_device()
maintianed its original code to show the block move. This patch cleans up
__check_raid_min_device().
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
move a section of btrfs_rm_device() code to check for min number of the
devices into the function __check_raid_min_devices()
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
A part of code from btrfs_scan_one_device() is moved to a new function
btrfs_read_disk_super(), so that former function looks cleaner. (In this
process it also moves the code which ensures null terminating label). So
this creates easy opportunity to merge various duplicate codes on read
disk super. Earlier attempt to merge duplicate codes highlighted that
there were some issues for which there are duplicate codes (to read disk
super), however it was not clear what was the issue. So until we figure
that out, its better to keep them in a separate functions.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
[ use GFP_KERNEL, PAGE_CACHE_ removal related fixups ]
Signed-off-by: David Sterba <dsterba@suse.com>
Now we force to create empty block group to keep data profile alive,
however, in the below example, we eventually get an empty block group
while we're trying to get more space for other types (metadata/system),
- Before,
block group "A": size=2G, used=1.2G
block group "B": size=2G, used=512M
- After "btrfs balance start -dusage=50 mount_point",
block group "A": size=2G, used=(1.2+0.5)G
block group "C": size=2G, used=0
Since there is no data in block group C, it won't be deleted
automatically and we have to get the unused 2G until the next mount.
Balance itself just moves data and doesn't remove data, so it's safe
to not create such a empty block group if we already have data
allocated in other block groups.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The delalloc reserved space is calculated in terms of number of bytes
used by an integral number of blocks. This is done by rounding down the
value of 'pos' to the nearest multiple of sectorsize.
The file offset value held by 'pos' variable may not be aligned to
sectorsize and hence when passing it as an argument to
btrfs_delalloc_release_space(), we may end up releasing larger delalloc
space than we originally had reserved.
Signed-off-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Now that we bail out immediately if ->writepage() returns an error,
we don't need an extra error to retain the error code.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
If sequential writer is writing in the middle of the page and it just redirties
the last written page by continuing from it.
In the above case this can end up with seeking back to that firstly redirtied
page after writing all the pages at the end of file because btrfs updates
mapping->writeback_index to 1 past the current one.
For non-cow filesystems, the cost is only about extra seek, while for cow
filesystems such as btrfs, it means unnecessary fragments.
To avoid it, we just need to continue writeback from the last written page.
This also updates btrfs to behave like what write_cache_pages() does, ie, bail
out immediately if there is an error in writepage().
<Ref: https://www.spinics.net/lists/linux-btrfs/msg52628.html>
Reported-by: Holger Hoffstätte <holger.hoffstaette@googlemail.com>
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
32-bit ioctl uses these rather than the regular FS_IOC_* versions. They can
be handled in btrfs using the same code. Without this, 32-bit {ch,ls}attr
fail.
Signed-off-by: Luke Dashjr <luke-jr+git@utopios.org>
Cc: stable@vger.kernel.org
Reviewed-by: Josef Bacik <jbacik@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Correct a typo in the chunk_mutex name to make it grepable.
Since it is better to fix several typos at once, fixing the 2 more in the
same file.
Signed-off-by: Luis de Bethencourt <luisbg@osg.samsung.com>
Signed-off-by: David Sterba <dsterba@suse.com>
fs/btrfs/extent-tree.c: In function ‘btrfs_lock_cluster’:
fs/btrfs/extent-tree.c:6399: warning: ‘used_bg’ may be used uninitialized in this function
- Replace "again: ... goto again;" by standard C "while (1) { ... }",
- Move block not processed during the first iteration of the loop to the
end of the loop, which allows to kill the "locked" variable,
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-and-Tested-by: Miao Xie <miaox@cn.fujitsu.com>
[ the compilation warning has been fixed by other patch, now we want to
clean up the function ]
Signed-off-by: David Sterba <dsterba@suse.com>
Actually save_error_info() sets the FS state to error and nothing else.
Further the word save doesn't induce caffeine when compared to the word
set in what actually it does.
So to make it better understandable move save_error_info() code to its
only consumer itself.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Looks like we added the incompatible defines in between the error
handling defines in the file ctree.h. Now group them back.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Apparently looks like ASSERT does the same intended job,
as intended btrfs_assert().
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_std_error() handles errors, puts FS into readonly mode
(as of now). So its good idea to rename it to btrfs_handle_fs_error().
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ edit changelog ]
Signed-off-by: David Sterba <dsterba@suse.com>
Pull btrfs fixes from Chris Mason:
"These are bug fixes, including a really old fsync bug, and a few trace
points to help us track down problems in the quota code"
* 'for-linus-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
Btrfs: fix file/data loss caused by fsync after rename and new inode
btrfs: Reset IO error counters before start of device replacing
btrfs: Add qgroup tracing
Btrfs: don't use src fd for printk
btrfs: fallback to vmalloc in btrfs_compare_tree
btrfs: handle non-fatal errors in btrfs_qgroup_inherit()
btrfs: Output more info for enospc_debug mount option
Btrfs: fix invalid reference in replace_path
Btrfs: Improve FL_KEEP_SIZE handling in fallocate
(badly behaved) dentry code in various file systems. These have been
reviewed by Al and the respective file system mtinainers and are going
through the ext4 tree for convenience.
This also has a few ext4 encryption bug fixes that were discovered in
Android testing (yes, we will need to get these sync'ed up with the
fs/crypto code; I'll take care of that). It also has some bug fixes
and a change to ignore the legacy quota options to allow for xfstests
regression testing of ext4's internal quota feature and to be more
consistent with how xfs handles this case.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABCAAGBQJXBn4aAAoJEPL5WVaVDYGjHWgH/2wXnlQnC2ndJhblBWtPzprz
OQW4dawdnhxqbTEGUqWe942tZivSb/liu/lF+urCGbWsbgz9jNOCmEAg7JPwlccY
mjzwDvtVq5U4d2rP+JDWXLy/Gi8XgUclhbQDWFVIIIea6fS7IuFWqoVBR+HPMhra
9tEygpiy5lNtJA/hqq3/z9x0AywAjwrYR491CuWreo2Uu1aeKg0YZsiDsuAcGioN
Waa2TgbC/ZZyJuJcPBP8If+VOFAa0ea3F+C/o7Tb9bOqwuz0qSTcaMRgt6eQ2KUt
P4b9Ecp1XLjJTC7IYOknUOScY3lCyREx/Xya9oGZfFNTSHzbOlLBoplCr3aUpYQ=
=/HHR
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 bugfixes from Ted Ts'o:
"These changes contains a fix for overlayfs interacting with some
(badly behaved) dentry code in various file systems. These have been
reviewed by Al and the respective file system mtinainers and are going
through the ext4 tree for convenience.
This also has a few ext4 encryption bug fixes that were discovered in
Android testing (yes, we will need to get these sync'ed up with the
fs/crypto code; I'll take care of that). It also has some bug fixes
and a change to ignore the legacy quota options to allow for xfstests
regression testing of ext4's internal quota feature and to be more
consistent with how xfs handles this case"
* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: ignore quota mount options if the quota feature is enabled
ext4 crypto: fix some error handling
ext4: avoid calling dquot_get_next_id() if quota is not enabled
ext4: retry block allocation for failed DIO and DAX writes
ext4: add lockdep annotations for i_data_sem
ext4: allow readdir()'s of large empty directories to be interrupted
btrfs: fix crash/invalid memory access on fsync when using overlayfs
ext4 crypto: use dget_parent() in ext4_d_revalidate()
ext4: use file_dentry()
ext4: use dget_parent() in ext4_file_open()
nfs: use file_dentry()
fs: add file_dentry()
ext4 crypto: don't let data integrity writebacks fail with ENOMEM
ext4: check if in-inode xattr is corrupted in ext4_expand_extra_isize_ea()
If we rename an inode A (be it a file or a directory), create a new
inode B with the old name of inode A and under the same parent directory,
fsync inode B and then power fail, at log tree replay time we end up
removing inode A completely. If inode A is a directory then all its files
are gone too.
Example scenarios where this happens:
This is reproducible with the following steps, taken from a couple of
test cases written for fstests which are going to be submitted upstream
soon:
# Scenario 1
mkfs.btrfs -f /dev/sdc
mount /dev/sdc /mnt
mkdir -p /mnt/a/x
echo "hello" > /mnt/a/x/foo
echo "world" > /mnt/a/x/bar
sync
mv /mnt/a/x /mnt/a/y
mkdir /mnt/a/x
xfs_io -c fsync /mnt/a/x
<power failure happens>
The next time the fs is mounted, log tree replay happens and
the directory "y" does not exist nor do the files "foo" and
"bar" exist anywhere (neither in "y" nor in "x", nor the root
nor anywhere).
# Scenario 2
mkfs.btrfs -f /dev/sdc
mount /dev/sdc /mnt
mkdir /mnt/a
echo "hello" > /mnt/a/foo
sync
mv /mnt/a/foo /mnt/a/bar
echo "world" > /mnt/a/foo
xfs_io -c fsync /mnt/a/foo
<power failure happens>
The next time the fs is mounted, log tree replay happens and the
file "bar" does not exists anymore. A file with the name "foo"
exists and it matches the second file we created.
Another related problem that does not involve file/data loss is when a
new inode is created with the name of a deleted snapshot and we fsync it:
mkfs.btrfs -f /dev/sdc
mount /dev/sdc /mnt
mkdir /mnt/testdir
btrfs subvolume snapshot /mnt /mnt/testdir/snap
btrfs subvolume delete /mnt/testdir/snap
rmdir /mnt/testdir
mkdir /mnt/testdir
xfs_io -c fsync /mnt/testdir # or fsync some file inside /mnt/testdir
<power failure>
The next time the fs is mounted the log replay procedure fails because
it attempts to delete the snapshot entry (which has dir item key type
of BTRFS_ROOT_ITEM_KEY) as if it were a regular (non-root) entry,
resulting in the following error that causes mount to fail:
[52174.510532] BTRFS info (device dm-0): failed to delete reference to snap, inode 257 parent 257
[52174.512570] ------------[ cut here ]------------
[52174.513278] WARNING: CPU: 12 PID: 28024 at fs/btrfs/inode.c:3986 __btrfs_unlink_inode+0x178/0x351 [btrfs]()
[52174.514681] BTRFS: Transaction aborted (error -2)
[52174.515630] Modules linked in: btrfs dm_flakey dm_mod overlay crc32c_generic ppdev xor raid6_pq acpi_cpufreq parport_pc tpm_tis sg parport tpm evdev i2c_piix4 proc
[52174.521568] CPU: 12 PID: 28024 Comm: mount Tainted: G W 4.5.0-rc6-btrfs-next-27+ #1
[52174.522805] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS by qemu-project.org 04/01/2014
[52174.524053] 0000000000000000 ffff8801df2a7710 ffffffff81264e93 ffff8801df2a7758
[52174.524053] 0000000000000009 ffff8801df2a7748 ffffffff81051618 ffffffffa03591cd
[52174.524053] 00000000fffffffe ffff88015e6e5000 ffff88016dbc3c88 ffff88016dbc3c88
[52174.524053] Call Trace:
[52174.524053] [<ffffffff81264e93>] dump_stack+0x67/0x90
[52174.524053] [<ffffffff81051618>] warn_slowpath_common+0x99/0xb2
[52174.524053] [<ffffffffa03591cd>] ? __btrfs_unlink_inode+0x178/0x351 [btrfs]
[52174.524053] [<ffffffff81051679>] warn_slowpath_fmt+0x48/0x50
[52174.524053] [<ffffffffa03591cd>] __btrfs_unlink_inode+0x178/0x351 [btrfs]
[52174.524053] [<ffffffff8118f5e9>] ? iput+0xb0/0x284
[52174.524053] [<ffffffffa0359fe8>] btrfs_unlink_inode+0x1c/0x3d [btrfs]
[52174.524053] [<ffffffffa038631e>] check_item_in_log+0x1fe/0x29b [btrfs]
[52174.524053] [<ffffffffa0386522>] replay_dir_deletes+0x167/0x1cf [btrfs]
[52174.524053] [<ffffffffa038739e>] fixup_inode_link_count+0x289/0x2aa [btrfs]
[52174.524053] [<ffffffffa038748a>] fixup_inode_link_counts+0xcb/0x105 [btrfs]
[52174.524053] [<ffffffffa038a5ec>] btrfs_recover_log_trees+0x258/0x32c [btrfs]
[52174.524053] [<ffffffffa03885b2>] ? replay_one_extent+0x511/0x511 [btrfs]
[52174.524053] [<ffffffffa034f288>] open_ctree+0x1dd4/0x21b9 [btrfs]
[52174.524053] [<ffffffffa032b753>] btrfs_mount+0x97e/0xaed [btrfs]
[52174.524053] [<ffffffff8108e1b7>] ? trace_hardirqs_on+0xd/0xf
[52174.524053] [<ffffffff8117bafa>] mount_fs+0x67/0x131
[52174.524053] [<ffffffff81193003>] vfs_kern_mount+0x6c/0xde
[52174.524053] [<ffffffffa032af81>] btrfs_mount+0x1ac/0xaed [btrfs]
[52174.524053] [<ffffffff8108e1b7>] ? trace_hardirqs_on+0xd/0xf
[52174.524053] [<ffffffff8108c262>] ? lockdep_init_map+0xb9/0x1b3
[52174.524053] [<ffffffff8117bafa>] mount_fs+0x67/0x131
[52174.524053] [<ffffffff81193003>] vfs_kern_mount+0x6c/0xde
[52174.524053] [<ffffffff8119590f>] do_mount+0x8a6/0x9e8
[52174.524053] [<ffffffff811358dd>] ? strndup_user+0x3f/0x59
[52174.524053] [<ffffffff81195c65>] SyS_mount+0x77/0x9f
[52174.524053] [<ffffffff814935d7>] entry_SYSCALL_64_fastpath+0x12/0x6b
[52174.561288] ---[ end trace 6b53049efb1a3ea6 ]---
Fix this by forcing a transaction commit when such cases happen.
This means we check in the commit root of the subvolume tree if there
was any other inode with the same reference when the inode we are
fsync'ing is a new inode (created in the current transaction).
Test cases for fstests, covering all the scenarios given above, were
submitted upstream for fstests:
* fstests: generic test for fsync after renaming directory
https://patchwork.kernel.org/patch/8694281/
* fstests: generic test for fsync after renaming file
https://patchwork.kernel.org/patch/8694301/
* fstests: add btrfs test for fsync after snapshot deletion
https://patchwork.kernel.org/patch/8670671/
Cc: stable@vger.kernel.org
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
Merge PAGE_CACHE_SIZE removal patches from Kirill Shutemov:
"PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time
ago with promise that one day it will be possible to implement page
cache with bigger chunks than PAGE_SIZE.
This promise never materialized. And unlikely will.
Let's stop pretending that pages in page cache are special. They are
not.
The first patch with most changes has been done with coccinelle. The
second is manual fixups on top.
The third patch removes macros definition"
[ I was planning to apply this just before rc2, but then I spaced out,
so here it is right _after_ rc2 instead.
As Kirill suggested as a possibility, I could have decided to only
merge the first two patches, and leave the old interfaces for
compatibility, but I'd rather get it all done and any out-of-tree
modules and patches can trivially do the converstion while still also
working with older kernels, so there is little reason to try to
maintain the redundant legacy model. - Linus ]
* PAGE_CACHE_SIZE-removal:
mm: drop PAGE_CACHE_* and page_cache_{get,release} definition
mm, fs: remove remaining PAGE_CACHE_* and page_cache_{get,release} usage
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros
Mostly direct substitution with occasional adjustment or removing
outdated comments.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time
ago with promise that one day it will be possible to implement page
cache with bigger chunks than PAGE_SIZE.
This promise never materialized. And unlikely will.
We have many places where PAGE_CACHE_SIZE assumed to be equal to
PAGE_SIZE. And it's constant source of confusion on whether
PAGE_CACHE_* or PAGE_* constant should be used in a particular case,
especially on the border between fs and mm.
Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much
breakage to be doable.
Let's stop pretending that pages in page cache are special. They are
not.
The changes are pretty straight-forward:
- <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>;
- <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>;
- PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN};
- page_cache_get() -> get_page();
- page_cache_release() -> put_page();
This patch contains automated changes generated with coccinelle using
script below. For some reason, coccinelle doesn't patch header files.
I've called spatch for them manually.
The only adjustment after coccinelle is revert of changes to
PAGE_CAHCE_ALIGN definition: we are going to drop it later.
There are few places in the code where coccinelle didn't reach. I'll
fix them manually in a separate patch. Comments and documentation also
will be addressed with the separate patch.
virtual patch
@@
expression E;
@@
- E << (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E
@@
expression E;
@@
- E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E
@@
@@
- PAGE_CACHE_SHIFT
+ PAGE_SHIFT
@@
@@
- PAGE_CACHE_SIZE
+ PAGE_SIZE
@@
@@
- PAGE_CACHE_MASK
+ PAGE_MASK
@@
expression E;
@@
- PAGE_CACHE_ALIGN(E)
+ PAGE_ALIGN(E)
@@
expression E;
@@
- page_cache_get(E)
+ get_page(E)
@@
expression E;
@@
- page_cache_release(E)
+ put_page(E)
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If device replace entry was found on disk at mounting and its num_write_errors
stats counter has non-NULL value, then replace operation will never be
finished and -EIO error will be reported by btrfs_scrub_dev() because
this counter is never reset.
# mount -o degraded /media/a4fb5c0a-21c5-4fe7-8d0e-fdd87d5f71ee/
# btrfs replace status /media/a4fb5c0a-21c5-4fe7-8d0e-fdd87d5f71ee/
Started on 25.Mar 07:28:00, canceled on 25.Mar 07:28:01 at 0.0%, 40 write errs, 0 uncorr. read errs
# btrfs replace start -B 4 /dev/sdg /media/a4fb5c0a-21c5-4fe7-8d0e-fdd87d5f71ee/
ERROR: ioctl(DEV_REPLACE_START) failed on "/media/a4fb5c0a-21c5-4fe7-8d0e-fdd87d5f71ee/": Input/output error, no error
Reset num_write_errors and num_uncorrectable_read_errors counters in the
dev_replace structure before start of replacing.
Signed-off-by: Yauhen Kharuzhy <yauhen.kharuzhy@zavadatar.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This patch adds tracepoints to the qgroup code on both the reporting side
(insert_dirty_extents) and the accounting side. Taken together it allows us
to see what qgroup operations have happened, and what their result was.
Signed-off-by: Mark Fasheh <mfasheh@suse.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The fd we pass in may not be on a btrfs file system, so don't try to do
BTRFS_I() on it. Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The allocation of node could fail if the memory is too fragmented for a
given node size, practically observed with 64k.
http://article.gmane.org/gmane.comp.file-systems.btrfs/54689
Reported-and-tested-by: Jean-Denis Girard <jd.girard@sysnux.pf>
Signed-off-by: David Sterba <dsterba@suse.com>
create_pending_snapshot() will go readonly on _any_ error return from
btrfs_qgroup_inherit(). If qgroups are enabled, a user can crash their fs by
just making a snapshot and asking it to inherit from an invalid qgroup. For
example:
$ btrfs sub snap -i 1/10 /btrfs/ /btrfs/foo
Will cause a transaction abort.
Fix this by only throwing errors in btrfs_qgroup_inherit() when we know
going readonly is acceptable.
The following xfstests test case reproduces this bug:
seq=`basename $0`
seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
tmp=/tmp/$$
status=1 # failure is the default!
trap "_cleanup; exit \$status" 0 1 2 3 15
_cleanup()
{
cd /
rm -f $tmp.*
}
# get standard environment, filters and checks
. ./common/rc
. ./common/filter
# remove previous $seqres.full before test
rm -f $seqres.full
# real QA test starts here
_supported_fs btrfs
_supported_os Linux
_require_scratch
rm -f $seqres.full
_scratch_mkfs
_scratch_mount
_run_btrfs_util_prog quota enable $SCRATCH_MNT
# The qgroup '1/10' does not exist and should be silently ignored
_run_btrfs_util_prog subvolume snapshot -i 1/10 $SCRATCH_MNT $SCRATCH_MNT/snap1
_scratch_unmount
echo "Silence is golden"
status=0
exit
Signed-off-by: Mark Fasheh <mfasheh@suse.de>
Reviewed-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
As one user in mail list report reproducible balance ENOSPC error, it's
better to add more debug info for enospc_debug mount option.
Reported-by: Marc Haber <mh+linux-btrfs@zugschlus.de>
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Dan Carpenter's static checker has found this error, it's introduced by
commit 64c043de46
("Btrfs: fix up read_tree_block to return proper error")
It's really supposed to 'break' the loop on error like others.
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
- We call inode_size_ok() only if FL_KEEP_SIZE isn't specified.
- As an optimisation we can skip the call if (off + len)
isn't greater than the current size of the file. This operation
is called under the lock so the less work we do, the better.
- If we call inode_size_ok() pass to it the correct value rather
than a more conservative estimation.
Signed-off-by: Davide Italiano <dccitaliano@gmail.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Pull btrfs fixes from Chris Mason:
"This has a few fixes Dave Sterba had queued up. These are all pretty
small, but since they were tested I decided against waiting for more"
* 'for-linus-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
btrfs: transaction_kthread() is not freezable
btrfs: cleaner_kthread() doesn't need explicit freeze
btrfs: do not write corrupted metadata blocks to disk
btrfs: csum_tree_block: return proper errno value
When get_acl() is called for an inode whose ACL is not cached yet, the
get_acl inode operation is called to fetch the ACL from the filesystem.
The inode operation is responsible for updating the cached acl with
set_cached_acl(). This is done without locking at the VFS level, so
another task can call set_cached_acl() or forget_cached_acl() before the
get_acl inode operation gets to calling set_cached_acl(), and then
get_acl's call to set_cached_acl() results in caching an outdate ACL.
Prevent this from happening by setting the cached ACL pointer to a
task-specific sentinel value before calling the get_acl inode operation.
Move the responsibility for updating the cached ACL from the get_acl
inode operations to get_acl(). There, only set the cached ACL if the
sentinel value hasn't changed.
The sentinel values are chosen to have odd values. Likewise, the value
of ACL_NOT_CACHED is odd. In contrast, ACL object pointers always have
an even value (ACLs are aligned in memory). This allows to distinguish
uncached ACLs values from ACL objects.
In addition, switch from guarding inode->i_acl and inode->i_default_acl
upates by the inode->i_lock spinlock to using xchg() and cmpxchg().
Filesystems that do not want ACLs returned from their get_acl inode
operations to be cached must call forget_cached_acl() to prevent the VFS
from doing so.
(Patch written by Al Viro and Andreas Gruenbacher.)
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
If the lower or upper directory of an overlayfs mount belong to a btrfs
file system and we fsync the file through the overlayfs' merged directory
we ended up accessing an inode that didn't belong to btrfs as if it were
a btrfs inode at btrfs_sync_file() resulting in a crash like the following:
[ 7782.588845] BUG: unable to handle kernel NULL pointer dereference at 0000000000000544
[ 7782.590624] IP: [<ffffffffa030b7ab>] btrfs_sync_file+0x11b/0x3e9 [btrfs]
[ 7782.591931] PGD 4d954067 PUD 1e878067 PMD 0
[ 7782.592016] Oops: 0002 [#6] PREEMPT SMP DEBUG_PAGEALLOC
[ 7782.592016] Modules linked in: btrfs overlay ppdev crc32c_generic evdev xor raid6_pq psmouse pcspkr sg serio_raw acpi_cpufreq parport_pc parport tpm_tis i2c_piix4 tpm i2c_core processor button loop autofs4 ext4 crc16 mbcache jbd2 sr_mod cdrom sd_mod ata_generic virtio_scsi ata_piix virtio_pci libata virtio_ring virtio scsi_mod e1000 floppy [last unloaded: btrfs]
[ 7782.592016] CPU: 10 PID: 16437 Comm: xfs_io Tainted: G D 4.5.0-rc6-btrfs-next-26+ #1
[ 7782.592016] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS by qemu-project.org 04/01/2014
[ 7782.592016] task: ffff88001b8d40c0 ti: ffff880137488000 task.ti: ffff880137488000
[ 7782.592016] RIP: 0010:[<ffffffffa030b7ab>] [<ffffffffa030b7ab>] btrfs_sync_file+0x11b/0x3e9 [btrfs]
[ 7782.592016] RSP: 0018:ffff88013748be40 EFLAGS: 00010286
[ 7782.592016] RAX: 0000000080000000 RBX: ffff880133b30c88 RCX: 0000000000000001
[ 7782.592016] RDX: 0000000000000001 RSI: ffffffff8148fec0 RDI: 00000000ffffffff
[ 7782.592016] RBP: ffff88013748bec0 R08: 0000000000000001 R09: 0000000000000000
[ 7782.624248] R10: ffff88013748be40 R11: 0000000000000246 R12: 0000000000000000
[ 7782.624248] R13: 0000000000000000 R14: 00000000009305a0 R15: ffff880015e3be40
[ 7782.624248] FS: 00007fa83b9cb700(0000) GS:ffff88023ed40000(0000) knlGS:0000000000000000
[ 7782.624248] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 7782.624248] CR2: 0000000000000544 CR3: 00000001fa652000 CR4: 00000000000006e0
[ 7782.624248] Stack:
[ 7782.624248] ffffffff8108b5cc ffff88013748bec0 0000000000000246 ffff8800b005ded0
[ 7782.624248] ffff880133b30d60 8000000000000000 7fffffffffffffff 0000000000000246
[ 7782.624248] 0000000000000246 ffffffff81074f9b ffffffff8104357c ffff880015e3be40
[ 7782.624248] Call Trace:
[ 7782.624248] [<ffffffff8108b5cc>] ? arch_local_irq_save+0x9/0xc
[ 7782.624248] [<ffffffff81074f9b>] ? ___might_sleep+0xce/0x217
[ 7782.624248] [<ffffffff8104357c>] ? __do_page_fault+0x3c0/0x43a
[ 7782.624248] [<ffffffff811a2351>] vfs_fsync_range+0x8c/0x9e
[ 7782.624248] [<ffffffff811a237f>] vfs_fsync+0x1c/0x1e
[ 7782.624248] [<ffffffff811a24d6>] do_fsync+0x31/0x4a
[ 7782.624248] [<ffffffff811a2700>] SyS_fsync+0x10/0x14
[ 7782.624248] [<ffffffff81493617>] entry_SYSCALL_64_fastpath+0x12/0x6b
[ 7782.624248] Code: 85 c0 0f 85 e2 02 00 00 48 8b 45 b0 31 f6 4c 29 e8 48 ff c0 48 89 45 a8 48 8d 83 d8 00 00 00 48 89 c7 48 89 45 a0 e8 fc 43 18 e1 <f0> 41 ff 84 24 44 05 00 00 48 8b 83 58 ff ff ff 48 c1 e8 07 83
[ 7782.624248] RIP [<ffffffffa030b7ab>] btrfs_sync_file+0x11b/0x3e9 [btrfs]
[ 7782.624248] RSP <ffff88013748be40>
[ 7782.624248] CR2: 0000000000000544
[ 7782.661994] ---[ end trace 721e14960eb939bc ]---
This started happening since commit 4bacc9c923 (overlayfs: Make f_path
always point to the overlay and f_inode to the underlay) and even though
after this change we could still access the btrfs inode through
struct file->f_mapping->host or struct file->f_inode, we would end up
resulting in more similar issues later on at check_parent_dirs_for_sync()
because the dentry we got (from struct file->f_path.dentry) was from
overlayfs and not from btrfs, that is, we had no way of getting the dentry
that belonged to btrfs (we always got the dentry that belonged to
overlayfs).
The new patch from Miklos Szeredi, titled "vfs: add file_dentry()" and
recently submitted to linux-fsdevel, adds a file_dentry() API that allows
us to get the btrfs dentry from the input file and therefore being able
to fsync when the upper and lower directories belong to btrfs filesystems.
This issue has been reported several times by users in the mailing list
and bugzilla. A test case for xfstests is being submitted as well.
Fixes: 4bacc9c923 ("overlayfs: Make f_path always point to the overlay and f_inode to the underlay")
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=101951
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=109791
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
Cc: stable@vger.kernel.org
transaction_kthread() is calling try_to_freeze(), but that's just an
expeinsive no-op given the fact that the thread is not marked freezable.
After removing this, disk-io.c is now independent on freezer API.
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: David Sterba <dsterba@suse.com>
cleaner_kthread() is not marked freezable, and therefore calling
try_to_freeze() in its context is a pointless no-op.
In addition to that, as has been clearly demonstrated by 80ad623edd
("Revert "btrfs: clear PF_NOFREEZE in cleaner_kthread()"), it's perfectly
valid / legal for cleaner_kthread() to stay scheduled out in an arbitrary
place during suspend (in that particular example that was waiting for
reading of extent pages), so there is no need to leave any traces of
freezer in this kthread.
Fixes: 80ad623edd ("Revert "btrfs: clear PF_NOFREEZE in cleaner_kthread()")
Fixes: 6962491321 ("btrfs: clear PF_NOFREEZE in cleaner_kthread()")
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: David Sterba <dsterba@suse.com>
csum_dirty_buffer was issuing a warning in case the extent buffer
did not look alright, but was still returning success.
Let's return error in this case, and also add an additional sanity
check on the extent buffer header.
The caller up the chain may BUG_ON on this, for example flush_epd_write_bio will,
but it is better than to have a silent metadata corruption on disk.
Signed-off-by: Alex Lyakas <alex@zadarastorage.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Pull btrfs updates from Chris Mason:
"We have a good sized cleanup of our internal read ahead code, and the
first series of commits from Chandan to enable PAGE_SIZE > sectorsize
Otherwise, it's a normal series of cleanups and fixes, with many
thanks to Dave Sterba for doing most of the patch wrangling this time"
* 'for-linus-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: (82 commits)
btrfs: make sure we stay inside the bvec during __btrfs_lookup_bio_sums
btrfs: Fix misspellings in comments.
btrfs: Print Warning only if ENOSPC_DEBUG is enabled
btrfs: scrub: silence an uninitialized variable warning
btrfs: move btrfs_compression_type to compression.h
btrfs: rename btrfs_print_info to btrfs_print_mod_info
Btrfs: Show a warning message if one of objectid reaches its highest value
Documentation: btrfs: remove usage specific information
btrfs: use kbasename in btrfsic_mount
Btrfs: do not collect ordered extents when logging that inode exists
Btrfs: fix race when checking if we can skip fsync'ing an inode
Btrfs: fix listxattrs not listing all xattrs packed in the same item
Btrfs: fix deadlock between direct IO reads and buffered writes
Btrfs: fix extent_same allowing destination offset beyond i_size
Btrfs: fix file loss on log replay after renaming a file and fsync
Btrfs: fix unreplayable log after snapshot delete + parent dir fsync
Btrfs: fix lockdep deadlock warning due to dev_replace
btrfs: drop unused argument in btrfs_ioctl_get_supported_features
btrfs: add GET_SUPPORTED_FEATURES to the control device ioctls
btrfs: change max_inline default to 2048
...
Commit c40a3d38af (Btrfs: Compute and look up csums based on
sectorsized blocks) changes around how we walk the bios while looking up
crcs. There's an inner loop that is jumping to the next bvec based on
sectors and before it derefs the next bvec, it needs to make sure we're
still in the bio.
In this case, the outer loop would have decided to stop moving forward
too, and the bvec deref is never actually used for anything. But
CONFIG_DEBUG_PAGEALLOC catches it because we're outside our bio.
Signed-off-by: Chris Mason <clm@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Even though this is a 'can't happen' situation, use the new
radix_tree_iter_retry() pattern to eliminate a goto.
[akpm@linux-foundation.org: fix btrfs build]
Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Konstantin Khlebnikov <khlebnikov@openvz.org>
Cc: Chris Mason <clm@fb.com>
Cc: Josef Bacik <jbacik@fb.com>
Cc: David Sterba <dsterba@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Dont print warning for ENOSPC error unless ENOSPC_DEBUG is enabled. Use
btrfs_debug if it is enabled.
Signed-off-by: Ashish Samant <ashish.samant@oracle.com>
[ preserve the WARN_ON ]
Signed-off-by: David Sterba <dsterba@suse.com>
It's basically harmless if "ref_level" isn't initialized since it's only
used for an error message, but it causes a static checker warning.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
So that its better organized.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
So that it indicates what it does.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
It's better to show a warning message for the exceptional case
that one of objectid (in most case, inode number) reaches its
highest value. For example, if inode cache is off and this event
happens, we can't create any file even if there are not so many files.
This message ease detecting such problem.
Signed-off-by: Satoru Takeuchi <takeuchi_satoru@jp.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This is more readable.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Reviewed-by Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Pull btrfs fix from Chris Mason:
"Filipe nailed down a problem where tree log replay would do some work
that orphan code wasn't expecting to be done yet, leading to BUG_ON"
* 'for-linus-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
Btrfs: fix loading of orphan roots leading to BUG_ON
When looking for orphan roots during mount we can end up hitting a
BUG_ON() (at root-item.c:btrfs_find_orphan_roots()) if a log tree is
replayed and qgroups are enabled. This is because after a log tree is
replayed, a transaction commit is made, which triggers qgroup extent
accounting which in turn does backref walking which ends up reading and
inserting all roots in the radix tree fs_info->fs_root_radix, including
orphan roots (deleted snapshots). So after the log tree is replayed, when
finding orphan roots we hit the BUG_ON with the following trace:
[118209.182438] ------------[ cut here ]------------
[118209.183279] kernel BUG at fs/btrfs/root-tree.c:314!
[118209.184074] invalid opcode: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC
[118209.185123] Modules linked in: btrfs dm_flakey dm_mod crc32c_generic ppdev xor raid6_pq evdev sg parport_pc parport acpi_cpufreq tpm_tis tpm psmouse
processor i2c_piix4 serio_raw pcspkr i2c_core button loop autofs4 ext4 crc16 mbcache jbd2 sd_mod sr_mod cdrom ata_generic virtio_scsi ata_piix libata
virtio_pci virtio_ring virtio scsi_mod e1000 floppy [last unloaded: btrfs]
[118209.186318] CPU: 14 PID: 28428 Comm: mount Tainted: G W 4.5.0-rc5-btrfs-next-24+ #1
[118209.186318] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS by qemu-project.org 04/01/2014
[118209.186318] task: ffff8801ec131040 ti: ffff8800af34c000 task.ti: ffff8800af34c000
[118209.186318] RIP: 0010:[<ffffffffa04237d7>] [<ffffffffa04237d7>] btrfs_find_orphan_roots+0x1fc/0x244 [btrfs]
[118209.186318] RSP: 0018:ffff8800af34faa8 EFLAGS: 00010246
[118209.186318] RAX: 00000000ffffffef RBX: 00000000ffffffef RCX: 0000000000000001
[118209.186318] RDX: 0000000080000000 RSI: 0000000000000001 RDI: 00000000ffffffff
[118209.186318] RBP: ffff8800af34fb08 R08: 0000000000000001 R09: 0000000000000000
[118209.186318] R10: ffff8800af34f9f0 R11: 6db6db6db6db6db7 R12: ffff880171b97000
[118209.186318] R13: ffff8801ca9d65e0 R14: ffff8800afa2e000 R15: 0000160000000000
[118209.186318] FS: 00007f5bcb914840(0000) GS:ffff88023edc0000(0000) knlGS:0000000000000000
[118209.186318] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[118209.186318] CR2: 00007f5bcaceb5d9 CR3: 00000000b49b5000 CR4: 00000000000006e0
[118209.186318] Stack:
[118209.186318] fffffbffffffffff 010230ffffffffff 0101000000000000 ff84000000000000
[118209.186318] fbffffffffffffff 30ffffffffffffff 0000000000000101 ffff880082348000
[118209.186318] 0000000000000000 ffff8800afa2e000 ffff8800afa2e000 0000000000000000
[118209.186318] Call Trace:
[118209.186318] [<ffffffffa042e2db>] open_ctree+0x1e37/0x21b9 [btrfs]
[118209.186318] [<ffffffffa040a753>] btrfs_mount+0x97e/0xaed [btrfs]
[118209.186318] [<ffffffff8108e1c0>] ? trace_hardirqs_on+0xd/0xf
[118209.186318] [<ffffffff8117b87e>] mount_fs+0x67/0x131
[118209.186318] [<ffffffff81192d2b>] vfs_kern_mount+0x6c/0xde
[118209.186318] [<ffffffffa0409f81>] btrfs_mount+0x1ac/0xaed [btrfs]
[118209.186318] [<ffffffff8108e1c0>] ? trace_hardirqs_on+0xd/0xf
[118209.186318] [<ffffffff8108c26b>] ? lockdep_init_map+0xb9/0x1b3
[118209.186318] [<ffffffff8117b87e>] mount_fs+0x67/0x131
[118209.186318] [<ffffffff81192d2b>] vfs_kern_mount+0x6c/0xde
[118209.186318] [<ffffffff81195637>] do_mount+0x8a6/0x9e8
[118209.186318] [<ffffffff8119598d>] SyS_mount+0x77/0x9f
[118209.186318] [<ffffffff81493017>] entry_SYSCALL_64_fastpath+0x12/0x6b
[118209.186318] Code: 64 00 00 85 c0 89 c3 75 24 f0 41 80 4c 24 20 20 49 8b bc 24 f0 01 00 00 4c 89 e6 e8 e8 65 00 00 85 c0 89 c3 74 11 83 f8 ef 75 02 <0f> 0b
4c 89 e7 e8 da 72 00 00 eb 1c 41 83 bc 24 00 01 00 00 00
[118209.186318] RIP [<ffffffffa04237d7>] btrfs_find_orphan_roots+0x1fc/0x244 [btrfs]
[118209.186318] RSP <ffff8800af34faa8>
[118209.230735] ---[ end trace 83938f987d85d477 ]---
So fix this by not treating the error -EEXIST, returned when attempting
to insert a root already inserted by the backref walking code, as an error.
The following test case for xfstests reproduces the bug:
seq=`basename $0`
seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
tmp=/tmp/$$
status=1 # failure is the default!
trap "_cleanup; exit \$status" 0 1 2 3 15
_cleanup()
{
_cleanup_flakey
cd /
rm -f $tmp.*
}
# get standard environment, filters and checks
. ./common/rc
. ./common/filter
. ./common/dmflakey
# real QA test starts here
_supported_fs btrfs
_supported_os Linux
_require_scratch
_require_dm_target flakey
_require_metadata_journaling $SCRATCH_DEV
rm -f $seqres.full
_scratch_mkfs >>$seqres.full 2>&1
_init_flakey
_mount_flakey
_run_btrfs_util_prog quota enable $SCRATCH_MNT
# Create 2 directories with one file in one of them.
# We use these just to trigger a transaction commit later, moving the file from
# directory a to directory b and doing an fsync against directory a.
mkdir $SCRATCH_MNT/a
mkdir $SCRATCH_MNT/b
touch $SCRATCH_MNT/a/f
sync
# Create our test file with 2 4K extents.
$XFS_IO_PROG -f -s -c "pwrite -S 0xaa 0 8K" $SCRATCH_MNT/foobar | _filter_xfs_io
# Create a snapshot and delete it. This doesn't really delete the snapshot
# immediately, just makes it inaccessible and invisible to user space, the
# snapshot is deleted later by a dedicated kernel thread (cleaner kthread)
# which is woke up at the next transaction commit.
# A root orphan item is inserted into the tree of tree roots, so that if a
# power failure happens before the dedicated kernel thread does the snapshot
# deletion, the next time the filesystem is mounted it resumes the snapshot
# deletion.
_run_btrfs_util_prog subvolume snapshot $SCRATCH_MNT $SCRATCH_MNT/snap
_run_btrfs_util_prog subvolume delete $SCRATCH_MNT/snap
# Now overwrite half of the extents we wrote before. Because we made a snapshpot
# before, which isn't really deleted yet (since no transaction commit happened
# after we did the snapshot delete request), the non overwritten extents get
# referenced twice, once by the default subvolume and once by the snapshot.
$XFS_IO_PROG -c "pwrite -S 0xbb 4K 8K" $SCRATCH_MNT/foobar | _filter_xfs_io
# Now move file f from directory a to directory b and fsync directory a.
# The fsync on the directory a triggers a transaction commit (because a file
# was moved from it to another directory) and the file fsync leaves a log tree
# with file extent items to replay.
mv $SCRATCH_MNT/a/f $SCRATCH_MNT/a/b
$XFS_IO_PROG -c "fsync" $SCRATCH_MNT/a
$XFS_IO_PROG -c "fsync" $SCRATCH_MNT/foobar
echo "File digest before power failure:"
md5sum $SCRATCH_MNT/foobar | _filter_scratch
# Now simulate a power failure and mount the filesystem to replay the log tree.
# After the log tree was replayed, we used to hit a BUG_ON() when processing
# the root orphan item for the deleted snapshot. This is because when processing
# an orphan root the code expected to be the first code inserting the root into
# the fs_info->fs_root_radix radix tree, while in reallity it was the second
# caller attempting to do it - the first caller was the transaction commit that
# took place after replaying the log tree, when updating the qgroup counters.
_flakey_drop_and_remount
echo "File digest before after failure:"
# Must match what he got before the power failure.
md5sum $SCRATCH_MNT/foobar | _filter_scratch
_unmount_flakey
status=0
exit
Fixes: 2d9e977610 ("Btrfs: use btrfs_get_fs_root in resolve_indirect_ref")
Cc: stable@vger.kernel.org # 4.4+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
When logging that an inode exists, for example as part of a directory
fsync operation, we were collecting any ordered extents for the inode but
we ended up doing nothing with them except tagging them as processed, by
setting the flag BTRFS_ORDERED_LOGGED on them, which prevented a
subsequent fsync of that inode (using the LOG_INODE_ALL mode) from
collecting and processing them. This created a time window where a second
fsync against the inode, using the fast path, ended up not logging the
checksums for the new extents but it logged the extents since they were
part of the list of modified extents. This happened because the ordered
extents were not collected and checksums were not yet added to the csum
tree - the ordered extents have not gone through btrfs_finish_ordered_io()
yet (which is where we add them to the csum tree by calling
inode.c:add_pending_csums()).
So fix this by not collecting an inode's ordered extents if we are logging
it with the LOG_INODE_EXISTS mode.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
If we're about to do a fast fsync for an inode and btrfs_inode_in_log()
returns false, it's possible that we had an ordered extent in progress
(btrfs_finish_ordered_io() not run yet) when we noticed that the inode's
last_trans field was not greater than the id of the last committed
transaction, but shortly after, before we checked if there were any
ongoing ordered extents, the ordered extent had just completed and
removed itself from the inode's ordered tree, in which case we end up not
logging the inode, losing some data if a power failure or crash happens
after the fsync handler returns and before the transaction is committed.
Fix this by checking first if there are any ongoing ordered extents
before comparing the inode's last_trans with the id of the last committed
transaction - when it completes, an ordered extent always updates the
inode's last_trans before it removes itself from the inode's ordered
tree (at btrfs_finish_ordered_io()).
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
In the listxattrs handler, we were not listing all the xattrs that are
packed in the same btree item, which happens when multiple xattrs have
a name that when crc32c hashed produce the same checksum value.
Fix this by processing them all.
The following test case for xfstests reproduces the issue:
seq=`basename $0`
seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
tmp=/tmp/$$
status=1 # failure is the default!
trap "_cleanup; exit \$status" 0 1 2 3 15
_cleanup()
{
cd /
rm -f $tmp.*
}
# get standard environment, filters and checks
. ./common/rc
. ./common/filter
. ./common/attr
# real QA test starts here
_supported_fs generic
_supported_os Linux
_require_scratch
_require_attrs
rm -f $seqres.full
_scratch_mkfs >>$seqres.full 2>&1
_scratch_mount
# Create our test file with a few xattrs. The first 3 xattrs have a name
# that when given as input to a crc32c function result in the same checksum.
# This made btrfs list only one of the xattrs through listxattrs system call
# (because it packs xattrs with the same name checksum into the same btree
# item).
touch $SCRATCH_MNT/testfile
$SETFATTR_PROG -n user.foobar -v 123 $SCRATCH_MNT/testfile
$SETFATTR_PROG -n user.WvG1c1Td -v qwerty $SCRATCH_MNT/testfile
$SETFATTR_PROG -n user.J3__T_Km3dVsW_ -v hello $SCRATCH_MNT/testfile
$SETFATTR_PROG -n user.something -v pizza $SCRATCH_MNT/testfile
$SETFATTR_PROG -n user.ping -v pong $SCRATCH_MNT/testfile
# Now call getfattr with --dump, which calls the listxattrs system call.
# It should list all the xattrs we have set before.
$GETFATTR_PROG --absolute-names --dump $SCRATCH_MNT/testfile | _filter_scratch
status=0
exit
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
When using the same file as the source and destination for a dedup
(extent_same ioctl) operation we were allowing it to dedup to a
destination offset beyond the file's size, which doesn't make sense and
it's not allowed for the case where the source and destination files are
not the same file. This made de deduplication operation successful only
when the source range corresponded to a hole, a prealloc extent or an
extent with all bytes having a value of 0x00. This was also leaving a
file hole (between i_size and destination offset) without the
corresponding file extent items, which can be reproduced with the
following steps for example:
$ mkfs.btrfs -f /dev/sdi
$ mount /dev/sdi /mnt/sdi
$ xfs_io -f -c "pwrite -S 0xab 304457 404990" /mnt/sdi/foobar
wrote 404990/404990 bytes at offset 304457
395 KiB, 99 ops; 0.0000 sec (31.150 MiB/sec and 7984.5149 ops/sec)
$ /git/hub/duperemove/btrfs-extent-same 24576 /mnt/sdi/foobar 28672 /mnt/sdi/foobar 929792
Deduping 2 total files
(28672, 24576): /mnt/sdi/foobar
(929792, 24576): /mnt/sdi/foobar
1 files asked to be deduped
i: 0, status: 0, bytes_deduped: 24576
24576 total bytes deduped in this operation
$ umount /mnt/sdi
$ btrfsck /dev/sdi
Checking filesystem on /dev/sdi
UUID: 98c528aa-0833-427d-9403-b98032ffbf9d
checking extents
checking free space cache
checking fs roots
root 5 inode 257 errors 100, file extent discount
Found file extent holes:
start: 712704, len: 217088
found 540673 bytes used err is 1
total csum bytes: 400
total tree bytes: 131072
total fs tree bytes: 32768
total extent tree bytes: 16384
btree space waste bytes: 123675
file data blocks allocated: 671744
referenced 671744
btrfs-progs v4.2.3
So fix this by not allowing the destination to go beyond the file's size,
just as we do for the same where the source and destination files are not
the same.
A test for xfstests follows.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
We have two cases where we end up deleting a file at log replay time
when we should not. For this to happen the file must have been renamed
and a directory inode must have been fsynced/logged.
Two examples that exercise these two cases are listed below.
Case 1)
$ mkfs.btrfs -f /dev/sdb
$ mount /dev/sdb /mnt
$ mkdir -p /mnt/a/b
$ mkdir /mnt/c
$ touch /mnt/a/b/foo
$ sync
$ mv /mnt/a/b/foo /mnt/c/
# Create file bar just to make sure the fsync on directory a/ does
# something and it's not a no-op.
$ touch /mnt/a/bar
$ xfs_io -c "fsync" /mnt/a
< power fail / crash >
The next time the filesystem is mounted, the log replay procedure
deletes file foo.
Case 2)
$ mkfs.btrfs -f /dev/sdb
$ mount /dev/sdb /mnt
$ mkdir /mnt/a
$ mkdir /mnt/b
$ mkdir /mnt/c
$ touch /mnt/a/foo
$ ln /mnt/a/foo /mnt/b/foo_link
$ touch /mnt/b/bar
$ sync
$ unlink /mnt/b/foo_link
$ mv /mnt/b/bar /mnt/c/
$ xfs_io -c "fsync" /mnt/a/foo
< power fail / crash >
The next time the filesystem is mounted, the log replay procedure
deletes file bar.
The reason why the files are deleted is because when we log inodes
other then the fsync target inode, we ignore their last_unlink_trans
value and leave the log without enough information to later replay the
rename operations. So we need to look at the last_unlink_trans values
and fallback to a transaction commit if they are greater than the
id of the last committed transaction.
So fix this by looking at the last_unlink_trans values and fallback to
transaction commits when needed. Also, when logging other inodes (for
case 1 we logged descendants of the fsync target inode while for case 2
we logged ascendants) we need to care about concurrent tasks updating
the last_unlink_trans of inodes we are logging (which was already an
existing problem in check_parent_dirs_for_sync()). Since we can not
acquire their inode mutex (vfs' struct inode ->i_mutex), as that causes
deadlocks with other concurrent operations that acquire the i_mutex of
2 inodes (other fsyncs or renames for example), we need to serialize on
the log_mutex of the inode we are logging. A task setting a new value for
an inode's last_unlink_trans must acquire the inode's log_mutex and it
must do this update before doing the actual unlink operation (which is
already the case except when deleting a snapshot). Conversely the task
logging the inode must first log the inode and then check the inode's
last_unlink_trans value while holding its log_mutex, as if its value is
not greater then the id of the last committed transaction it means it
logged a safe state of the inode's items, while if its value is not
smaller then the id of the last committed transaction it means the inode
state it has logged might not be safe (the concurrent task might have
just updated last_unlink_trans but hasn't done yet the unlink operation)
and therefore a transaction commit must be done.
Test cases for xfstests follow in separate patches.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
If we delete a snapshot, fsync its parent directory and crash/power fail
before the next transaction commit, on the next mount when we attempt to
replay the log tree of the root containing the parent directory we will
fail and prevent the filesystem from mounting, which is solvable by wiping
out the log trees with the btrfs-zero-log tool but very inconvenient as
we will lose any data and metadata fsynced before the parent directory
was fsynced.
For example:
$ mkfs.btrfs -f /dev/sdc
$ mount /dev/sdc /mnt
$ mkdir /mnt/testdir
$ btrfs subvolume snapshot /mnt /mnt/testdir/snap
$ btrfs subvolume delete /mnt/testdir/snap
$ xfs_io -c "fsync" /mnt/testdir
< crash / power failure and reboot >
$ mount /dev/sdc /mnt
mount: mount(2) failed: No such file or directory
And in dmesg/syslog we get the following message and trace:
[192066.361162] BTRFS info (device dm-0): failed to delete reference to snap, inode 257 parent 257
[192066.363010] ------------[ cut here ]------------
[192066.365268] WARNING: CPU: 4 PID: 5130 at fs/btrfs/inode.c:3986 __btrfs_unlink_inode+0x17a/0x354 [btrfs]()
[192066.367250] BTRFS: Transaction aborted (error -2)
[192066.368401] Modules linked in: btrfs dm_flakey dm_mod ppdev sha256_generic xor raid6_pq hmac drbg ansi_cprng aesni_intel acpi_cpufreq tpm_tis aes_x86_64 tpm ablk_helper evdev cryptd sg parport_pc i2c_piix4 psmouse lrw parport i2c_core pcspkr gf128mul processor serio_raw glue_helper button loop autofs4 ext4 crc16 mbcache jbd2 sd_mod sr_mod cdrom ata_generic virtio_scsi ata_piix libata virtio_pci virtio_ring crc32c_intel scsi_mod e1000 virtio floppy [last unloaded: btrfs]
[192066.377154] CPU: 4 PID: 5130 Comm: mount Tainted: G W 4.4.0-rc6-btrfs-next-20+ #1
[192066.378875] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS by qemu-project.org 04/01/2014
[192066.380889] 0000000000000000 ffff880143923670 ffffffff81257570 ffff8801439236b8
[192066.382561] ffff8801439236a8 ffffffff8104ec07 ffffffffa039dc2c 00000000fffffffe
[192066.384191] ffff8801ed31d000 ffff8801b9fc9c88 ffff8801086875e0 ffff880143923710
[192066.385827] Call Trace:
[192066.386373] [<ffffffff81257570>] dump_stack+0x4e/0x79
[192066.387387] [<ffffffff8104ec07>] warn_slowpath_common+0x99/0xb2
[192066.388429] [<ffffffffa039dc2c>] ? __btrfs_unlink_inode+0x17a/0x354 [btrfs]
[192066.389236] [<ffffffff8104ec68>] warn_slowpath_fmt+0x48/0x50
[192066.389884] [<ffffffffa039dc2c>] __btrfs_unlink_inode+0x17a/0x354 [btrfs]
[192066.390621] [<ffffffff81184b55>] ? iput+0xb0/0x266
[192066.391200] [<ffffffffa039ea25>] btrfs_unlink_inode+0x1c/0x3d [btrfs]
[192066.391930] [<ffffffffa03ca623>] check_item_in_log+0x1fe/0x29b [btrfs]
[192066.392715] [<ffffffffa03ca827>] replay_dir_deletes+0x167/0x1cf [btrfs]
[192066.393510] [<ffffffffa03cccc7>] replay_one_buffer+0x417/0x570 [btrfs]
[192066.394241] [<ffffffffa03ca164>] walk_up_log_tree+0x10e/0x1dc [btrfs]
[192066.394958] [<ffffffffa03cac72>] walk_log_tree+0xa5/0x190 [btrfs]
[192066.395628] [<ffffffffa03ce8b8>] btrfs_recover_log_trees+0x239/0x32c [btrfs]
[192066.396790] [<ffffffffa03cc8b0>] ? replay_one_extent+0x50a/0x50a [btrfs]
[192066.397891] [<ffffffffa0394041>] open_ctree+0x1d8b/0x2167 [btrfs]
[192066.398897] [<ffffffffa03706e1>] btrfs_mount+0x5ef/0x729 [btrfs]
[192066.399823] [<ffffffff8108ad98>] ? trace_hardirqs_on+0xd/0xf
[192066.400739] [<ffffffff8108959b>] ? lockdep_init_map+0xb9/0x1b3
[192066.401700] [<ffffffff811714b9>] mount_fs+0x67/0x131
[192066.402482] [<ffffffff81188560>] vfs_kern_mount+0x6c/0xde
[192066.403930] [<ffffffffa03702bd>] btrfs_mount+0x1cb/0x729 [btrfs]
[192066.404831] [<ffffffff8108ad98>] ? trace_hardirqs_on+0xd/0xf
[192066.405726] [<ffffffff8108959b>] ? lockdep_init_map+0xb9/0x1b3
[192066.406621] [<ffffffff811714b9>] mount_fs+0x67/0x131
[192066.407401] [<ffffffff81188560>] vfs_kern_mount+0x6c/0xde
[192066.408247] [<ffffffff8118ae36>] do_mount+0x893/0x9d2
[192066.409047] [<ffffffff8113009b>] ? strndup_user+0x3f/0x8c
[192066.409842] [<ffffffff8118b187>] SyS_mount+0x75/0xa1
[192066.410621] [<ffffffff8147e517>] entry_SYSCALL_64_fastpath+0x12/0x6b
[192066.411572] ---[ end trace 2de42126c1e0a0f0 ]---
[192066.412344] BTRFS: error (device dm-0) in __btrfs_unlink_inode:3986: errno=-2 No such entry
[192066.413748] BTRFS: error (device dm-0) in btrfs_replay_log:2464: errno=-2 No such entry (Failed to recover log tree)
[192066.415458] BTRFS error (device dm-0): cleaner transaction attach returned -30
[192066.444613] BTRFS: open_ctree failed
This happens because when we are replaying the log and processing the
directory entry pointing to the snapshot in the subvolume tree, we treat
its btrfs_dir_item item as having a location with a key type matching
BTRFS_INODE_ITEM_KEY, which is wrong because the type matches
BTRFS_ROOT_ITEM_KEY and therefore must be processed differently, as the
object id refers to a root number and not to an inode in the root
containing the parent directory.
So fix this by triggering a transaction commit if an fsync against the
parent directory is requested after deleting a snapshot. This is the
simplest approach for a rare use case. Some alternative that avoids the
transaction commit would require more code to explicitly delete the
snapshot at log replay time (factoring out common code from ioctl.c:
btrfs_ioctl_snap_destroy()), special care at fsync time to remove the
log tree of the snapshot's root from the log root of the root of tree
roots, amongst other steps.
A test case for xfstests that triggers the issue follows.
seq=`basename $0`
seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
tmp=/tmp/$$
status=1 # failure is the default!
trap "_cleanup; exit \$status" 0 1 2 3 15
_cleanup()
{
_cleanup_flakey
cd /
rm -f $tmp.*
}
# get standard environment, filters and checks
. ./common/rc
. ./common/filter
. ./common/dmflakey
# real QA test starts here
_need_to_be_root
_supported_fs btrfs
_supported_os Linux
_require_scratch
_require_dm_target flakey
_require_metadata_journaling $SCRATCH_DEV
rm -f $seqres.full
_scratch_mkfs >>$seqres.full 2>&1
_init_flakey
_mount_flakey
# Create a snapshot at the root of our filesystem (mount point path), delete it,
# fsync the mount point path, crash and mount to replay the log. This should
# succeed and after the filesystem is mounted the snapshot should not be visible
# anymore.
_run_btrfs_util_prog subvolume snapshot $SCRATCH_MNT $SCRATCH_MNT/snap1
_run_btrfs_util_prog subvolume delete $SCRATCH_MNT/snap1
$XFS_IO_PROG -c "fsync" $SCRATCH_MNT
_flakey_drop_and_remount
[ -e $SCRATCH_MNT/snap1 ] && \
echo "Snapshot snap1 still exists after log replay"
# Similar scenario as above, but this time the snapshot is created inside a
# directory and not directly under the root (mount point path).
mkdir $SCRATCH_MNT/testdir
_run_btrfs_util_prog subvolume snapshot $SCRATCH_MNT $SCRATCH_MNT/testdir/snap2
_run_btrfs_util_prog subvolume delete $SCRATCH_MNT/testdir/snap2
$XFS_IO_PROG -c "fsync" $SCRATCH_MNT/testdir
_flakey_drop_and_remount
[ -e $SCRATCH_MNT/testdir/snap2 ] && \
echo "Snapshot snap2 still exists after log replay"
_unmount_flakey
echo "Silence is golden"
status=0
exit
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Tested-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Chris Mason <clm@fb.com>
Xfstests btrfs/011 complains about a deadlock warning,
[ 1226.649039] =========================================================
[ 1226.649039] [ INFO: possible irq lock inversion dependency detected ]
[ 1226.649039] 4.1.0+ #270 Not tainted
[ 1226.649039] ---------------------------------------------------------
[ 1226.652955] kswapd0/46 just changed the state of lock:
[ 1226.652955] (&delayed_node->mutex){+.+.-.}, at: [<ffffffff81458735>] __btrfs_release_delayed_node+0x45/0x1d0
[ 1226.652955] but this lock took another, RECLAIM_FS-unsafe lock in the past:
[ 1226.652955] (&fs_info->dev_replace.lock){+.+.+.}
and interrupts could create inverse lock ordering between them.
[ 1226.652955]
other info that might help us debug this:
[ 1226.652955] Chain exists of:
&delayed_node->mutex --> &found->groups_sem --> &fs_info->dev_replace.lock
[ 1226.652955] Possible interrupt unsafe locking scenario:
[ 1226.652955] CPU0 CPU1
[ 1226.652955] ---- ----
[ 1226.652955] lock(&fs_info->dev_replace.lock);
[ 1226.652955] local_irq_disable();
[ 1226.652955] lock(&delayed_node->mutex);
[ 1226.652955] lock(&found->groups_sem);
[ 1226.652955] <Interrupt>
[ 1226.652955] lock(&delayed_node->mutex);
[ 1226.652955]
*** DEADLOCK ***
Commit 084b6e7c76 ("btrfs: Fix a lockdep warning when running xfstest.") tried
to fix a similar one that has the exactly same warning, but with that, we still
run to this.
The above lock chain comes from
btrfs_commit_transaction
->btrfs_run_delayed_items
...
->__btrfs_update_delayed_inode
...
->__btrfs_cow_block
...
->find_free_extent
->cache_block_group
->load_free_space_cache
->btrfs_readpages
->submit_one_bio
...
->__btrfs_map_block
->btrfs_dev_replace_lock
However, with high memory pressure, tasks which hold dev_replace.lock can
be interrupted by kswapd and then kswapd is intended to release memory occupied
by superblock, inodes and dentries, where we may call evict_inode, and it comes
to
[ 1226.652955] [<ffffffff81458735>] __btrfs_release_delayed_node+0x45/0x1d0
[ 1226.652955] [<ffffffff81459e74>] btrfs_remove_delayed_node+0x24/0x30
[ 1226.652955] [<ffffffff8140c5fe>] btrfs_evict_inode+0x34e/0x700
delayed_node->mutex may be acquired in __btrfs_release_delayed_node(), and it leads
to a ABBA deadlock.
To fix this, we can use "blocking rwlock" used in the case of extent_buffer, but
things are simpler here since we only needs read's spinlock to blocking lock.
With this, btrfs/011 no more produces warnings in dmesg.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The control device is accessible when no filesystem is mounted and we
may want to query features supported by the module. This is already
possible using the sysfs files, this ioctl is for parity and
convenience.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The current practical default is ~4k on x86_64 (the logic is more complex,
simplified for brevity), the inlined files land in the metadata group and
thus consume space that could be needed for the real metadata.
The inlining brings some usability surprises:
1) total space consumption measured on various filesystems and btrfs
with DUP metadata was quite visible because of the duplicated data
within metadata
2) inlined data may exhaust the metadata, which are more precious in case
the entire device space is allocated to chunks (ie. balance cannot
make the space more compact)
3) performance suffers a bit as the inlined blocks are duplicate and
stored far away on the device.
Proposed fix: set the default to 2048
This fixes namely 1), the total filesysystem space consumption will be on
par with other filesystems.
Partially fixes 2), more data are pushed to the data block groups.
The characteristics of 3) are based on actual small file size
distribution.
The change is independent of the metadata blockgroup type (though it's
most visible with DUP) or system page size as these parameters are not
trival to find out, compared to file size.
Signed-off-by: David Sterba <dsterba@suse.com>
Let's remove the error message that appears when the tree_id is not
present. This can happen with the quota tree and has been observed in
practice. The applications are supposed to handle -ENOENT and we don't
need to report that in the system log as it's not a fatal error.
Reported-by: Vlastimil Babka <vbabka@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
With CONFIG_SMP and CONFIG_PREEMPT both disabled, gcc decides
to partially inline the get_state_failrec() function but cannot
figure out that means the failrec pointer is always valid
if the function returns success, which causes a harmless
warning:
fs/btrfs/extent_io.c: In function 'clean_io_failure':
fs/btrfs/extent_io.c:2131:4: error: 'failrec' may be used uninitialized in this function [-Werror=maybe-uninitialized]
This marks get_state_failrec() and set_state_failrec() both
as 'noinline', which avoids the warning in all cases for me,
and seems less ugly than adding a fake initialization.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: 47dc196ae7 ("btrfs: use proper type for failrec in extent_state")
Signed-off-by: David Sterba <dsterba@suse.com>
Pull btrfs fix from Chris Mason:
"My for-linus-4.5 branch has a btrfs DIO error passing fix.
I know how much you love DIO, so I'm going to suggest against reading
it. We'll follow up with a patch to drop the error arg from
dio_end_io in the next merge window."
* 'for-linus-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
Btrfs: fix direct IO requests not reporting IO error to user space
btrfs failed in xfstests btrfs/080 with -o nodatacow.
Can be reproduced by following script:
DEV=/dev/vdg
MNT=/mnt/tmp
umount $DEV &>/dev/null
mkfs.btrfs -f $DEV
mount -o nodatacow $DEV $MNT
dd if=/dev/zero of=$MNT/test bs=1 count=2048 &
btrfs subvolume snapshot -r $MNT $MNT/test_snap &
wait
--
We can see dd failed on NO_SPACE.
Reason:
__btrfs_buffered_write should run cow write when no_cow impossible,
and current code is designed with above logic.
But check_can_nocow() have 2 type of return value(0 and <0) on
can_not_no_cow, and current code only continue write on first case,
the second case happened in doing subvolume.
Fix:
Continue write when check_can_nocow() return 0 and <0.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Cleanup.
kmem_cache_destroy has support NULL argument checking,
so drop the double null testing before calling it.
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We were getting build warning about:
fs/btrfs/extent-tree.c:7021:34: warning: ‘used_bg’ may be used
uninitialized in this function
It is not a valid warning as used_bg is never used uninitilized since
locked is initially false so we can never be in the section where
'used_bg' is used. But gcc is not able to understand that and we can
initialize it while declaring to silence the warning.
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: David Sterba <dsterba@suse.com>
CURRENT_TIME macro is not appropriate for filesystems as it
doesn't use the right granularity for filesystem timestamps.
Use current_fs_time() instead.
Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Cc: Chris Mason <clm@fb.com>
Cc: Josef Bacik <jbacik@fb.com>
Cc: linux-btrfs@vger.kernel.org
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The kernel provides a swap() that does the same thing as this code.
Signed-off-by: Dave Jones <dsj@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
While running btrfs_mksubvol(), d_really_is_positive() is called twice.
First in btrfs_mksubvol() and second inside btrfs_may_create(). So I
remove the first one.
Signed-off-by: Byongho Lee <bhlee.kernel@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Simplify expression in btrfs_calc_trans_metadata_size().
Signed-off-by: Byongho Lee <bhlee.kernel@gmail.com>
Reviewed-by: Stefan Behrens <sbehrens@giantdisaster.de>
Signed-off-by: David Sterba <dsterba@suse.com>
We will sometimes start background flushing the various enospc related things
(delayed nodes, delalloc, etc) if we are getting close to reserving all of our
available space. We don't want to do this however when we are actually using
this space as it causes unneeded thrashing. We currently try to do this by
checking bytes_used >= thresh, but bytes_used is only part of the equation, we
need to use bytes_reserved as well as this represents space that is very likely
to become bytes_used in the future.
My tracing tool will keep count of the number of times we kick off the async
flusher, the following are counts for the entire run of generic/027
No Patch Patch
avg: 5385 5009
median: 5500 4916
We skewed lower than the average with my patch and higher than the average with
the patch, overall it cuts the flushing from anywhere from 5-10%, which in the
case of actual ENOSPC is quite helpful. Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There are a few places where we add to trans->bytes_reserved but don't have the
corresponding trace point. With these added my tool no longer sees transaction
leaks.
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
truncate_space_check is using btrfs_csum_bytes_to_leaves() but forgetting to
multiply by nodesize so we get an actual byte count. We need a tracepoint here
so that we have the matching reserve for the release that will come later. Also
add a comment to make clear what the intent of truncate_space_check is.
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
I'm writing a tool to visualize the enospc system in order to help debug enospc
bugs and I found weird data and ran it down to when we update the global block
rsv. We add all of the remaining free space to the block rsv, do a trace event,
then remove the extra and do another trace event. This makes my visualization
look silly and is unintuitive code as well. Fix this stuff to only add the
amount we are missing, or free the amount we are missing. This is less clean to
read but more explicit in what it is doing, as well as only emitting events for
values that make sense. Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
For a non-existent device, old code bypasses adding it in dev's reada
queue.
And to solve problem of unfinished waitting in raid5/6,
commit 5fbc7c59fd ("Btrfs: fix unfinished readahead thread for
raid5/6 degraded mounting")
adding an exception for the first stripe, in short, the first
stripe will always be processed whether the device exists or not.
Actually we have a better way for the above request: just bypass
creation of the reada_extent for non-existent device, it will make
code simple and effective.
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Reada background works is not designed to finish all jobs
completely, it will break in following case:
1: When a device reaches workload limit (MAX_IN_FLIGHT)
2: Total reads reach max limit (10000)
3: All devices don't have queued more jobs, often happened in DUP case
And if all background works exit with remaining jobs,
btrfs_reada_wait() will wait indefinetelly.
Above problem is rarely happened in old code, because:
1: Every work queues 2x new works
So many works reduced chances of undone jobs.
2: One work will continue 10000 times loop in case of no-jobs
It reduced no-thread window time.
But after we fixed above case, the "undone reada extents" frequently
happened.
Fix:
Check to ensure we have at least one thread if there are undone jobs
in btrfs_reada_wait().
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Reada creates 2 works for each level of tree recursively.
In case of a tree having many levels, the number of created works
is 2^level_of_tree.
Actually we don't need so many works in parallel, this patch limits
max works to BTRFS_MAX_MIRRORS * 2.
The per-fs works_counter will be also used for btrfs_reada_wait() to
check is there are background workers.
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
No need to decrease dev->reada_in_flight in __readahead_hook()'s
internal and reada_extent_put().
reada_extent_put() have no chance to decrease dev->reada_in_flight
in free operation, because reada_extent have additional refcnt when
scheduled to a dev.
We can put inc and dec operation for dev->reada_in_flight to one
place instead to make logic simple and safe, and move useless
reada_extent->scheduled_for to a bool flag instead.
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Remove one copy of loop to fix the typo of iterate zones.
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Current code set nritems to 0 to make for_loop useless to bypass it,
and set generation's value which is not necessary.
Jump into cleanup directly is better choise.
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
What __readahead_hook() need exactly is fs_info, no need to convert
fs_info to root in caller and convert back in __readahead_hook()
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
reada_start_machine_dev() already have reada_extent pointer, pass
it into __readahead_hook() directly instead of search radix_tree
will make code run faster.
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We can't release reada_extent earlier than __readahead_hook(), because
__readahead_hook() still need to use it, it is necessary to hode a refcnt
to avoid it be freed.
Actually it is not a problem after my patch named:
Avoid many times of empty loop
It make reada_extent in above line include at least one reada_extctl,
which keeps additional one refcnt for reada_extent.
But we still need this patch to make the code in pretty logic.
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
level is not used in severial functions, remove them from arguments,
and remove relative code for get its value.
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When failed adding all dev_zones for a reada_extent, the extent
will have no chance to be selected to run, and keep in memory
for ever.
We should bypass this extent to avoid above case.
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
If some device is not reachable, we should bypass and continus addingb
next, instead of break on bad device.
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Move is_need_to_readahead contition earlier to avoid useless loop
to get relative data for readahead.
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We can see following loop(10000 times) in trace_log:
[ 75.416137] ZL_DEBUG: reada_start_machine_dev:730: pid=771 comm=kworker/u2:3 re->ref_cnt ffff88003741e0c0 1 -> 2
[ 75.417413] ZL_DEBUG: reada_extent_put:524: pid=771 comm=kworker/u2:3 re = ffff88003741e0c0, refcnt = 2 -> 1
[ 75.418611] ZL_DEBUG: __readahead_hook:129: pid=771 comm=kworker/u2:3 re->ref_cnt ffff88003741e0c0 1 -> 2
[ 75.419793] ZL_DEBUG: reada_extent_put:524: pid=771 comm=kworker/u2:3 re = ffff88003741e0c0, refcnt = 2 -> 1
[ 75.421016] ZL_DEBUG: reada_start_machine_dev:730: pid=771 comm=kworker/u2:3 re->ref_cnt ffff88003741e0c0 1 -> 2
[ 75.422324] ZL_DEBUG: reada_extent_put:524: pid=771 comm=kworker/u2:3 re = ffff88003741e0c0, refcnt = 2 -> 1
[ 75.423661] ZL_DEBUG: __readahead_hook:129: pid=771 comm=kworker/u2:3 re->ref_cnt ffff88003741e0c0 1 -> 2
[ 75.424882] ZL_DEBUG: reada_extent_put:524: pid=771 comm=kworker/u2:3 re = ffff88003741e0c0, refcnt = 2 -> 1
...(10000 times)
[ 124.101672] ZL_DEBUG: reada_start_machine_dev:730: pid=771 comm=kworker/u2:3 re->ref_cnt ffff88003741e0c0 1 -> 2
[ 124.102850] ZL_DEBUG: reada_extent_put:524: pid=771 comm=kworker/u2:3 re = ffff88003741e0c0, refcnt = 2 -> 1
[ 124.104008] ZL_DEBUG: __readahead_hook:129: pid=771 comm=kworker/u2:3 re->ref_cnt ffff88003741e0c0 1 -> 2
[ 124.105121] ZL_DEBUG: reada_extent_put:524: pid=771 comm=kworker/u2:3 re = ffff88003741e0c0, refcnt = 2 -> 1
Reason:
If more than one user trigger reada in same extent, the first task
finished setting of reada data struct and call reada_start_machine()
to start, and the second task only add a ref_count but have not
add reada_extctl struct completely, the reada_extent can not finished
all jobs, and will be selected in __reada_start_machine() for 10000
times(total times in __reada_start_machine()).
Fix:
For a reada_extent without job, we don't need to run it, just return
0 to let caller break.
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In rechecking zone-in-tree, we still need to check zone include
our logical address.
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We can avoid additional locking-acquirment and one pair of
kref_get/put by combine two condition.
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
reada_zone->end is end pos of segment:
end = start + cache->key.offset - 1;
So we need to use "<=" in condition to judge is a pos in the
segment.
The problem happened rearly, because logical pos rarely pointed
to last 4k of a blockgroup, but we need to fix it to make code
right in logic.
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
If a bio for a direct IO request fails, we were not setting the error in
the parent bio (the main DIO bio), making us not return the error to
user space in btrfs_direct_IO(), that is, it made __blockdev_direct_IO()
return the number of bytes issued for IO and not the error a bio created
and submitted by btrfs_submit_direct() got from the block layer.
This essentially happens because when we call:
dio_end_io(dio_bio, bio->bi_error);
It does not set dio_bio->bi_error to the value of the second argument.
So just add this missing assignment in endio callbacks, just as we do in
the error path at btrfs_submit_direct() when we fail to clone the dio bio
or allocate its private object. This follows the convention of what is
done with other similar APIs such as bio_endio() where the caller is
responsible for setting the bi_error field in the bio it passes as an
argument to bio_endio().
This was detected by the new generic test cases in xfstests: 271, 272,
276 and 278. Which essentially setup a dm error target, then load the
error table, do a direct IO write and unload the error table. They
expect the write to fail with -EIO, which was not getting reported
when testing against btrfs.
Cc: stable@vger.kernel.org # 4.3+
Fixes: 4246a0b63b ("block: add a bi_error field to struct bio")
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Pull btrfs fixes from Chris Mason:
"This has a few fixes from Filipe, along with a readdir fix from Dave
that we've been testing for some time"
* 'for-linus-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
btrfs: properly set the termination value of ctx->pos in readdir
Btrfs: fix hang on extent buffer lock caused by the inode_paths ioctl
Btrfs: remove no longer used function extent_read_full_page_nolock()
Btrfs: fix page reading in extent_same ioctl leading to csum errors
Btrfs: fix invalid page accesses in extent_same (dedup) ioctl
Introduce new mount option alias "norecovery" for nologreplay, to keep
"norecovery" behavior the same with other filesystems.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Introduce a new mount option "nologreplay" to co-operate with "ro" mount
option to get real readonly mount, like "norecovery" in ext* and xfs.
Since the new parse_options() need to check new flags at remount time,
so add a new parameter for parse_options().
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Reviewed-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Tested-by: Austin S. Hemmelgarn <ahferroin7@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Current "recovery" mount option will only try to use backup root.
However the word "recovery" is too generic and may be confusing for some
users.
Here introduce a new and more specific mount option, "usebackuproot" to
replace "recovery" mount option.
"Recovery" will be kept for compatibility reason, but will be
deprecated.
Also, since "usebackuproot" will only affect mount behavior and after
open_ctree() it has nothing to do with the filesystem, so clear the flag
after mount succeeded.
This provides the basis for later unified "norecovery" mount option.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
[ dropped usebackuproot from show_mount, added note about 'recovery' to
docs ]
Signed-off-by: David Sterba <dsterba@suse.com>
The number of distinct key types is not that big that we could waste one
for something new we want to store in the tree.
Similar to the temporary items, we'll introduce a new name for an
existing key value and use the objectid for further extension. The
victim is the BTRFS_DEV_STATS_KEY (248).
The device stats are an example of a permanent item.
Signed-off-by: David Sterba <dsterba@suse.com>
The number of distinct key types is not that big that we could waste one
for something new we want to store in the tree. We'll introduce a new
name for an existing key value and use the objectid for further
extension. The victim is the BTRFS_BALANCE_ITEM_KEY (248).
The nature of the balance status item is a good example of the temporary
item. It exists from beginning of the balance, keeps the status until it
finishes.
Signed-off-by: David Sterba <dsterba@suse.com>
The value of ctx->pos in the last readdir call is supposed to be set to
INT_MAX due to 32bit compatibility, unless 'pos' is intentially set to a
larger value, then it's LLONG_MAX.
There's a report from PaX SIZE_OVERFLOW plugin that "ctx->pos++"
overflows (https://forums.grsecurity.net/viewtopic.php?f=1&t=4284), on a
64bit arch, where the value is 0x7fffffffffffffff ie. LLONG_MAX before
the increment.
We can get to that situation like that:
* emit all regular readdir entries
* still in the same call to readdir, bump the last pos to INT_MAX
* next call to readdir will not emit any entries, but will reach the
bump code again, finds pos to be INT_MAX and sets it to LLONG_MAX
Normally this is not a problem, but if we call readdir again, we'll find
'pos' set to LLONG_MAX and the unconditional increment will overflow.
The report from Victor at
(http://thread.gmane.org/gmane.comp.file-systems.btrfs/49500) with debugging
print shows that pattern:
Overflow: e
Overflow: 7fffffff
Overflow: 7fffffffffffffff
PAX: size overflow detected in function btrfs_real_readdir
fs/btrfs/inode.c:5760 cicus.935_282 max, count: 9, decl: pos; num: 0;
context: dir_context;
CPU: 0 PID: 2630 Comm: polkitd Not tainted 4.2.3-grsec #1
Hardware name: Gigabyte Technology Co., Ltd. H81ND2H/H81ND2H, BIOS F3 08/11/2015
ffffffff81901608 0000000000000000 ffffffff819015e6 ffffc90004973d48
ffffffff81742f0f 0000000000000007 ffffffff81901608 ffffc90004973d78
ffffffff811cb706 0000000000000000 ffff8800d47359e0 ffffc90004973ed8
Call Trace:
[<ffffffff81742f0f>] dump_stack+0x4c/0x7f
[<ffffffff811cb706>] report_size_overflow+0x36/0x40
[<ffffffff812ef0bc>] btrfs_real_readdir+0x69c/0x6d0
[<ffffffff811dafc8>] iterate_dir+0xa8/0x150
[<ffffffff811e6d8d>] ? __fget_light+0x2d/0x70
[<ffffffff811dba3a>] SyS_getdents+0xba/0x1c0
Overflow: 1a
[<ffffffff811db070>] ? iterate_dir+0x150/0x150
[<ffffffff81749b69>] entry_SYSCALL_64_fastpath+0x12/0x83
The jump from 7fffffff to 7fffffffffffffff happens when new dir entries
are not yet synced and are processed from the delayed list. Then the code
could go to the bump section again even though it might not emit any new
dir entries from the delayed list.
The fix avoids entering the "bump" section again once we've finished
emitting the entries, both for synced and delayed entries.
References: https://forums.grsecurity.net/viewtopic.php?f=1&t=4284
Reported-by: Victor <services@swwu.com>
CC: stable@vger.kernel.org
Signed-off-by: David Sterba <dsterba@suse.com>
Tested-by: Holger Hoffstätte <holger.hoffstaette@googlemail.com>
Signed-off-by: Chris Mason <clm@fb.com>
We can safely use GFP_KERNEL in the functions called from the ioctl
handlers. Here we can allocate up to 32k so less pressure to the
allocator could help.
Signed-off-by: David Sterba <dsterba@suse.com>
Readdir is initiated from userspace and is not on the critical
writeback path, we don't need to use GFP_NOFS for allocations.
Signed-off-by: David Sterba <dsterba@suse.com>
Fallocate is initiated from userspace and is not on the critical
writeback path, we don't need to use GFP_NOFS for allocations.
Signed-off-by: David Sterba <dsterba@suse.com>
We don't need to use GFP_NOFS in all contexts, eg. during mount or for
dummy root tree, but we might for the the log tree creation.
Signed-off-by: David Sterba <dsterba@suse.com>
Scrub is not on the critical writeback path we don't need to use
GFP_NOFS for all allocations. The failures are handled and stats passed
back to userspace.
Let's use GFP_KERNEL on the paths where everything is ok, ie. setup the
global structures and the IO submission paths.
Functions that do the repair and fixups still use GFP_NOFS as we might
want to skip any other filesystem activity if we encounter an error.
This could turn out to be unnecessary, but requires more review compared
to the easy cases in this patch.
Signed-off-by: David Sterba <dsterba@suse.com>
The readahead framework is not on the critical writeback path we don't
need to use GFP_NOFS for allocations. All error paths are handled and
the readahead failures are not fatal. The actual users (scrub,
dev-replace) will trigger reads if the blocks are not found in cache.
Signed-off-by: David Sterba <dsterba@suse.com>
The send operation is not on the critical writeback path we don't need
to use GFP_NOFS for allocations. All error paths are handled and the
whole operation is restartable.
Signed-off-by: David Sterba <dsterba@suse.com>
Not needed after the previous patch named
"Btrfs: fix page reading in extent_same ioctl leading to csum errors".
Signed-off-by: Filipe Manana <fdmanana@suse.com>
In the extent_same ioctl, we were grabbing the pages (locked) and
attempting to read them without bothering about any concurrent IO
against them. That is, we were not checking for any ongoing ordered
extents nor waiting for them to complete, which leads to a race where
the extent_same() code gets a checksum verification error when it
reads the pages, producing a message like the following in dmesg
and making the operation fail to user space with -ENOMEM:
[18990.161265] BTRFS warning (device sdc): csum failed ino 259 off 495616 csum 685204116 expected csum 1515870868
Fix this by using btrfs_readpage() for reading the pages instead of
extent_read_full_page_nolock(), which waits for any concurrent ordered
extents to complete and locks the io range. Also do better error handling
and don't treat all failures as -ENOMEM, as that's clearly misleasing,
becoming identical to the checks and operation of prepare_uptodate_page().
The use of extent_read_full_page_nolock() was required before
commit f441460202 ("btrfs: fix deadlock with extent-same and readpage"),
as we had the range locked in an inode's io tree before attempting to
read the pages.
Fixes: f441460202 ("btrfs: fix deadlock with extent-same and readpage")
Cc: stable@vger.kernel.org # 4.2+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
In the extent_same ioctl we are getting the pages for the source and
target ranges and unlocking them immediately after, which is incorrect
because later we attempt to map them (with kmap_atomic) and access their
contents at btrfs_cmp_data(). When we do such access the pages might have
been relocated or removed from memory, which leads to an invalid memory
access. This issue is detected on a kernel with CONFIG_DEBUG_PAGEALLOC=y
which produces a trace like the following:
186736.677437] general protection fault: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC
[186736.680382] Modules linked in: btrfs dm_flakey dm_mod ppdev xor raid6_pq sha256_generic hmac drbg ansi_cprng acpi_cpufreq evdev sg aesni_intel aes_x86_64
parport_pc ablk_helper tpm_tis psmouse parport i2c_piix4 tpm cryptd i2c_core lrw processor button serio_raw pcspkr gf128mul glue_helper loop autofs4 ext4
crc16 mbcache jbd2 sd_mod sr_mod cdrom ata_generic virtio_scsi ata_piix libata virtio_pci virtio_ring crc32c_intel scsi_mod e1000 virtio floppy [last
unloaded: btrfs]
[186736.681319] CPU: 13 PID: 10222 Comm: duperemove Tainted: G W 4.4.0-rc6-btrfs-next-18+ #1
[186736.681319] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS by qemu-project.org 04/01/2014
[186736.681319] task: ffff880132600400 ti: ffff880362284000 task.ti: ffff880362284000
[186736.681319] RIP: 0010:[<ffffffff81264d00>] [<ffffffff81264d00>] memcmp+0xb/0x22
[186736.681319] RSP: 0018:ffff880362287d70 EFLAGS: 00010287
[186736.681319] RAX: 000002c002468acf RBX: 0000000012345678 RCX: 0000000000000000
[186736.681319] RDX: 0000000000001000 RSI: 0005d129c5cf9000 RDI: 0005d129c5cf9000
[186736.681319] RBP: ffff880362287d70 R08: 0000000000000000 R09: 0000000000001000
[186736.681319] R10: ffff880000000000 R11: 0000000000000476 R12: 0000000000001000
[186736.681319] R13: ffff8802f91d4c88 R14: ffff8801f2a77830 R15: ffff880352e83e40
[186736.681319] FS: 00007f27b37fe700(0000) GS:ffff88043dda0000(0000) knlGS:0000000000000000
[186736.681319] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[186736.681319] CR2: 00007f27a406a000 CR3: 0000000217421000 CR4: 00000000001406e0
[186736.681319] Stack:
[186736.681319] ffff880362287ea0 ffffffffa048d0bd 000000000009f000 0000000000001000
[186736.681319] 0100000000000000 ffff8801f2a77850 ffff8802f91d49b0 ffff880132600400
[186736.681319] 00000000000004f8 ffff8801c1efbe41 0000000000000000 0000000000000038
[186736.681319] Call Trace:
[186736.681319] [<ffffffffa048d0bd>] btrfs_ioctl+0x24cb/0x2731 [btrfs]
[186736.681319] [<ffffffff8108a8b0>] ? arch_local_irq_save+0x9/0xc
[186736.681319] [<ffffffff8118b3d4>] ? rcu_read_unlock+0x3e/0x5d
[186736.681319] [<ffffffff811822f8>] do_vfs_ioctl+0x42b/0x4ea
[186736.681319] [<ffffffff8118b4f3>] ? __fget_light+0x62/0x71
[186736.681319] [<ffffffff8118240e>] SyS_ioctl+0x57/0x79
[186736.681319] [<ffffffff814872d7>] entry_SYSCALL_64_fastpath+0x12/0x6f
[186736.681319] Code: 0a 3c 6e 74 0d 3c 79 74 04 3c 59 75 0c c6 06 01 eb 03 c6 06 00 31 c0 eb 05 b8 ea ff ff ff 5d c3 55 31 c9 48 89 e5 48 39 d1 74 13 <0f> b6
04 0f 44 0f b6 04 0e 48 ff c1 44 29 c0 74 ea eb 02 31 c0
(gdb) list *(btrfs_ioctl+0x24cb)
0x5e0e1 is in btrfs_ioctl (fs/btrfs/ioctl.c:2972).
2967 dst_addr = kmap_atomic(dst_page);
2968
2969 flush_dcache_page(src_page);
2970 flush_dcache_page(dst_page);
2971
2972 if (memcmp(addr, dst_addr, cmp_len))
2973 ret = BTRFS_SAME_DATA_DIFFERS;
2974
2975 kunmap_atomic(addr);
2976 kunmap_atomic(dst_addr);
So fix this by making sure we keep the pages locked and respect the same
locking order as everywhere else: get and lock the pages first and then
lock the range in the inode's io tree (like for example at
__btrfs_buffered_write() and extent_readpages()). If an ordered extent
is found after locking the range in the io tree, unlock the range,
unlock the pages, wait for the ordered extent to complete and repeat the
entire locking process until no overlapping ordered extents are found.
Cc: stable@vger.kernel.org # 4.2+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
In subpagesize-blocksize scenario, the "destination offset" argument passed to
the btrfs_ioctl_clone() can be aligned to sectorsize but may not be
necessarily aligned to the machine's page size. In such cases,
truncate_inode_pages_range() ends up zeroing out the partial page and future
read operations will return incorrect data. Hence this commit explicitly
rounds down the "destination offset" to the machine's page size.
Signed-off-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When extending a file by either "truncate up" or by writing beyond i_size, the
page which had i_size needs to be marked "read only" so that future writes to
the page via mmap interface causes btrfs_page_mkwrite() to be invoked. If not,
a write performed after extending the file via the mmap interface will find
the page to be writaeable and continue writing to the page without invoking
btrfs_page_mkwrite() i.e. we end up writing to a file without reserving disk
space.
Signed-off-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_getattr() returns PAGE_CACHE_SIZE as the block size. Since
generic_fillattr() already does the right thing (by obtaining block size
from inode->i_blkbits), just remove the statement from btrfs_getattr.
Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Signed-off-by: David Sterba <dsterba@suse.com>
cow_file_range_inline() limits the size of an inline extent to
PAGE_CACHE_SIZE. This breaks in subpagesize-blocksize scenarios. Fix this by
comparing against root->sectorsize.
Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In subpagesize-blocksize scenario, map_length can be less than the length of a
bio vector. Such a condition may cause btrfs_submit_direct_hook() to submit a
zero length bio. Fix this by comparing map_length against block size rather
than with bv_len.
Signed-off-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In subpagesize-blocksize a page can map multiple extent buffers and hence
using (page index, seq) as the search key is incorrect. For example, searching
through tree modification log tree can return an entry associated with the
first extent buffer mapped by the page (if such an entry exists), when we are
actually searching for entries associated with extent buffers that are mapped
at position 2 or more in the page.
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In subpagesize-blocksize scenario it is not sufficient to search using the
first byte of the page to make sure that there are no ordered extents
present across the page. Fix this.
Signed-off-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In subpagesize-blocksize scenario, if i_size occurs in a block which is not
the last block in the page, then the space to be reserved should be calculated
appropriately.
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Signed-off-by: David Sterba <dsterba@suse.com>
While at it, this commit changes btrfs_truncate_page() to truncate sectorsized
blocks instead of pages. Hence the function has been renamed to
btrfs_truncate_block().
Signed-off-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The direct I/O read's endio and corresponding repair functions work on
page sized blocks. This commit adds the ability for direct I/O read to work on
subpagesized blocks.
Signed-off-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Checksums are applicable to sectorsize units. The current code uses
bio->bv_len units to compute and look up checksums. This works on machines
where sectorsize == PAGE_SIZE. This patch makes the checksum computation and
look up code to work with sectorsize units.
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently, the code reserves/releases extents in multiples of PAGE_CACHE_SIZE
units. Fix this by doing reservation/releases in block size units.
Signed-off-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Signed-off-by: David Sterba <dsterba@suse.com>
So the old one didn't work properly before alternatives had run.
And it was supposed to provide an optimized JMP because the
assumption was that the offset it is jumping to is within a
signed byte and thus a two-byte JMP.
So I did an x86_64 allyesconfig build and dumped all possible
sites where static_cpu_has() was used. The optimization amounted
to all in all 12(!) places where static_cpu_has() had generated
a 2-byte JMP. Which has saved us a whopping 36 bytes!
This clearly is not worth the trouble so we can remove it. The
only place where the optimization might count - in __switch_to()
- we will handle differently. But that's not subject of this
patch.
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1453842730-28463-6-git-send-email-bp@alien8.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull btrfs fixes from Chris Mason:
"Dave had a small collection of fixes to the new free space tree code,
one of which was keeping our sysfs files more up to date with feature
bits as different things get enabled (lzo, raid5/6, etc).
I should have kept the sysfs stuff for rc3, since we always manage to
trip over something. This time it was GFP_KERNEL from somewhere that
is NOFS only. Instead of rebasing it out I've put a revert in, and
we'll fix it properly for rc3.
Otherwise, Filipe fixed a btrfs DIO race and Qu Wenruo fixed up a
use-after-free in our tracepoints that Dave Jones reported"
* 'for-linus-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
Revert "btrfs: synchronize incompat feature bits with sysfs files"
btrfs: don't use GFP_HIGHMEM for free-space-tree bitmap kzalloc
btrfs: sysfs: check initialization state before updating features
Revert "btrfs: clear PF_NOFREEZE in cleaner_kthread()"
btrfs: async-thread: Fix a use-after-free error for trace
Btrfs: fix race between fsync and lockless direct IO writes
btrfs: add free space tree to the cow-only list
btrfs: add free space tree to lockdep classes
btrfs: tweak free space tree bitmap allocation
btrfs: tests: switch to GFP_KERNEL
btrfs: synchronize incompat feature bits with sysfs files
btrfs: sysfs: introduce helper for syncing bits with sysfs files
btrfs: sysfs: add free-space-tree bit attribute
btrfs: sysfs: fix typo in compat_ro attribute definition
This reverts commit 14e46e0495.
This ends up doing sysfs operations from deep in balance (where we
should be GFP_NOFS) and under heavy balance load, we're making races
against sysfs internals.
Revert it for now while we figure things out.
Signed-off-by: Chris Mason <clm@fb.com>
If the mount phase is not finished, we can't update the sysfs files.
Reported-by: Chris Mason <clm@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
Parameter of trace_btrfs_work_queued() can be freed in its workqueue.
So no one use use that pointer after queue_work().
Fix the user-after-free bug by move the trace line before queue_work().
Reported-by: Dave Jones <davej@codemonkey.org.uk>
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
An fsync, using the fast path, can race with a concurrent lockless direct
IO write and end up logging a file extent item that points to an extent
that wasn't written to yet. This is because the fast fsync path collects
ordered extents into a local list and then collects all the new extent
maps to log file extent items based on them, while the direct IO write
path creates the new extent map before it creates the corresponding
ordered extent (and submitting the respective bio(s)).
So fix this by making the direct IO write path create ordered extents
before the extent maps and make the fast fsync path collect any new
ordered extents after it collects the extent maps.
Note that making the fsync handler call inode_dio_wait() (after acquiring
the inode's i_mutex) would not work and lead to a deadlock when doing
AIO, as through AIO we end up in a path where the fsync handler is called
(through dio_aio_complete_work() -> dio_complete() -> vfs_fsync_range())
before the inode's dio counter is decremented (inode_dio_wait() waits
for this counter to have a value of zero).
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
parallel to mutex_{lock,unlock,trylock,is_locked,lock_nested},
inode_foo(inode) being mutex_foo(&inode->i_mutex).
Please, use those for access to ->i_mutex; over the coming cycle
->i_mutex will become rwsem, with ->lookup() done with it held
only shared.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Pull more btrfs updates from Chris Mason:
"These are mostly fixes that we've been testing, but also we grabbed
and tested a few small cleanups that had been on the list for a while.
Zhao Lei's patchset also fixes some early ENOSPC buglets"
* 'for-linus-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: (21 commits)
btrfs: raid56: Use raid_write_end_io for scrub
btrfs: Remove unnecessary ClearPageUptodate for raid56
btrfs: use rbio->nr_pages to reduce calculation
btrfs: Use unified stripe_page's index calculation
btrfs: Fix calculation of rbio->dbitmap's size calculation
btrfs: Fix no_space in write and rm loop
btrfs: merge functions for wait snapshot creation
btrfs: delete unused argument in btrfs_copy_from_user
btrfs: Use direct way to determine raid56 write/recover mode
btrfs: Small cleanup for get index_srcdev loop
btrfs: Enhance chunk validation check
btrfs: Enhance super validation check
Btrfs: fix deadlock running delayed iputs at transaction commit time
Btrfs: fix typo in log message when starting a balance
btrfs: remove duplicate const specifier
btrfs: initialize the seq counter in struct btrfs_device
Btrfs: clean up an error code in btrfs_init_space_info()
btrfs: fix iterator with update error in backref.c
Btrfs: fix output of compression message in btrfs_parse_options()
Btrfs: Initialize btrfs_root->highest_objectid when loading tree root and subvolume roots
...
The requested bitmap size varies, observed numbers were < 4K up to 16K.
Using vmalloc unconditionally would be too heavy, we'll try contiguous
allocations first and fall back to vmalloc if there's no contig memory.
Signed-off-by: David Sterba <dsterba@suse.com>
There's no reason to do GFP_NOFS in tests, it's not data-heavy and
memory allocation failures would affect only developers or testers.
Signed-off-by: David Sterba <dsterba@suse.com>
The files under /sys/fs/UUID/features get out of sync with the actual
incompat bits set for the filesystem if they change after mount (eg. the
LZO compression).
Synchronize the feature bits with the sysfs files representing them
right after we set/clear them.
Signed-off-by: David Sterba <dsterba@suse.com>
The files under /sys/fs/UUID/features get out of sync with the actual
incompat bits set for the filesystem if they change after mount. We're
going to sync them and need a helper to do that.
Signed-off-by: David Sterba <dsterba@suse.com>
The incompat bit representing the newly added free space tree feature is
missing. Right now it will be listed only among features supported by
the module, not per-fs.
Signed-off-by: David Sterba <dsterba@suse.com>
No need to create additional end_io function for scrub, it increased
code size and introduced some un-unified lines, as:
raid_write_parity_end_io():
int err = bio->bi_error;
if (bio->bi_error)
raid_write_end_io():
int err = bio->bi_error;
if (err)
This patch combines them.
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
PageUptodate flag already initialized to 0 for new page,
no need to set it again.
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
We can use rbio->stripe_npages to reduce unnecessary calculation in
many code place.
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
We are using different index calculation method for stripe_page in
current code:
1: (rbio->stripe_len / PAGE_CACHE_SIZE) * stripe_index + page_index
2: DIV_ROUND_UP(rbio->stripe_len, PAGE_CACHE_SIZE) * stripe_index + page_index
3: DIV_ROUND_UP(rbio->stripe_len * stripe_index, PAGE_CACHE_SIZE) + page_index
...
They can get same result when stripe_len align to PAGE_CACHE_SIZE,
this is why current code can work, intruduce and use a common function
for calculation is a better choose.
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
Current code is trying to calculate rbio->dbitmap's size to make it
align to sizeof(long), but implement haven't achived this object,
it is align to sizeof(char) instead.
This patch fixed above calculation, and use sizeof(long) instead of
fixed "8" to increate compatibility.
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
I see no_space in v4.4-rc1 again in xfstests generic/102.
It happened randomly in some node only.
(one of 4 phy-node, and a kvm with non-virtio block driver)
By bisect, we can found the first-bad is:
commit bdced438ac ("block: setup bi_phys_segments after splitting")'
But above patch only triggered the bug by making bio operation
faster(or slower).
Main reason is in our space_allocating code, we need to commit
page writeback before wait it complish, this patch fixed above
bug.
BTW, there is another reason for generic/102 fail, caused by
disable default mixed-blockgroup, I'll fix it in xfstests.
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
wait_for_snapshot_creation() is in same group with oher two:
btrfs_start_write_no_snapshoting()
btrfs_end_write_no_snapshoting()
Rename wait_for_snapshot_creation() and move it into same place
with other two.
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
size_t write_bytes is not necessary for btrfs_copy_from_user(),
delete it.
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
Old code used bbio->raid_map to determine whether in raid56
write/recover operation, because we didn't't have bbio->map_type.
Now we have direct way for this condition, rid of using
the function-relative data, and make the code more readable.
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
1: Adjust condition in loop to make less TAB
2: Move btrfs_put_bbio()'s line for combine, and makes logic clean.
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
Enhance chunk validation:
1) Num_stripes
We already have such check but it's only in super block sys chunk
array.
Now check all on-disk chunks.
2) Chunk logical
It should be aligned to sector size.
This behavior should be *DOUBLE CHECKED* for 64K sector size like
PPC64 or AArch64.
Maybe we can found some hidden bugs.
3) Chunk length
Same as chunk logical, should be aligned to sector size.
4) Stripe length
It should be power of 2.
5) Chunk type
Any bit out of TYPE_MAS | PROFILE_MASK is invalid.
With all these much restrict rules, several fuzzed image reported in
mail list should no longer cause kernel panic.
Reported-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
Enhance btrfs_check_super_valid() function by the following points:
1) Restrict sector/node size check
Not the old max/min valid check, but also check if it's a power of 2.
So some bogus number like 12K node size won't pass now.
2) Super flag check
For now, there is still some inconsistency between kernel and
btrfs-progs super flags.
And considering btrfs-progs may add new flags for super block, this
check will only output warning.
3) Better root alignment check
Now root bytenr is checked against sector size.
4) Move some check into btrfs_check_super_valid().
Like node size vs leaf size check, and PAGESIZE vs sectorsize check.
And magic number check.
Reported-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
The recent change titled "Btrfs: Check metadata redundancy on balance"
(already in linux-next) left a typo in a message for users:
metatdata -> metadata.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
Pull btrfs updates from Chris Mason:
"This has our usual assortment of fixes and cleanups, but the biggest
change included is Omar Sandoval's free space tree. It's not the
default yet, mounting -o space_cache=v2 enables it and sets a readonly
compat bit. The tree can actually be deleted and regenerated if there
are any problems, but it has held up really well in testing so far.
For very large filesystems (30T+) our existing free space caching code
can end up taking a huge amount of time during commits. The new tree
based code is faster and less work overall to update as the commit
progresses.
Omar worked on this during the summer and we'll hammer on it in
production here at FB over the next few months"
* 'for-linus-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: (73 commits)
Btrfs: fix fitrim discarding device area reserved for boot loader's use
Btrfs: Check metadata redundancy on balance
btrfs: statfs: report zero available if metadata are exhausted
btrfs: preallocate path for snapshot creation at ioctl time
btrfs: allocate root item at snapshot ioctl time
btrfs: do an allocation earlier during snapshot creation
btrfs: use smaller type for btrfs_path locks
btrfs: use smaller type for btrfs_path lowest_level
btrfs: use smaller type for btrfs_path reada
btrfs: cleanup, use enum values for btrfs_path reada
btrfs: constify static arrays
btrfs: constify remaining structs with function pointers
btrfs tests: replace whole ops structure for free space tests
btrfs: use list_for_each_entry* in backref.c
btrfs: use list_for_each_entry_safe in free-space-cache.c
btrfs: use list_for_each_entry* in check-integrity.c
Btrfs: use linux/sizes.h to represent constants
btrfs: cleanup, remove stray return statements
btrfs: zero out delayed node upon allocation
btrfs: pass proper enum type to start_transaction()
...
I managed to trigger this:
| INFO: trying to register non-static key.
| the code is fine but needs lockdep annotation.
| turning off the locking correctness validator.
| CPU: 1 PID: 781 Comm: systemd-gpt-aut Not tainted 4.4.0-rt2+ #14
| Hardware name: ARM-Versatile Express
| [<80307cec>] (dump_stack)
| [<80070e98>] (__lock_acquire)
| [<8007184c>] (lock_acquire)
| [<80287800>] (btrfs_ioctl)
| [<8012a8d4>] (do_vfs_ioctl)
| [<8012ac14>] (SyS_ioctl)
so I think that btrfs_device_data_ordered_init() is not invoked behind
a macro somewhere.
Fixes: 7cc8e58d53 ("Btrfs: fix unprotected device's variants on 32bits machine")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
If we return 1 here, then the caller treats it as an error and returns
-EINVAL. It causes a static checker warning to treat positive returns
as an error.
Fixes: 1aba86d67f ('Btrfs: fix easily get into ENOSPC in mixed case')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Fix the following error:
fs/btrfs/backref.c:565:1-20: iterator with update on line 577
Fixes: a7ca422('btrfs: use list_for_each_entry* in backref.c')
Signed-off-by: Geliang Tang <geliangtang@163.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The compression message might not be correctly output.
Fix it.
[[before fix]]
# mount -o compress /dev/sdb3 /test3
[ 996.874264] BTRFS info (device sdb3): disk space caching is enabled
[ 996.874268] BTRFS: has skinny extents
# mount | grep /test3
/dev/sdb3 on /test3 type btrfs (rw,relatime,compress=zlib,space_cache,subvolid=5,subvol=/)
# mount -o remount,compress-force /dev/sdb3 /test3
[ 1035.075017] BTRFS info (device sdb3): force zlib compression
[ 1035.075021] BTRFS info (device sdb3): disk space caching is enabled
# mount | grep /test3
/dev/sdb3 on /test3 type btrfs (rw,relatime,compress-force=zlib,space_cache,subvolid=5,subvol=/)
# mount -o remount,compress /dev/sdb3 /test3
[ 1053.679092] BTRFS info (device sdb3): disk space caching is enabled
# mount | grep /test3
/dev/sdb3 on /test3 type btrfs (rw,relatime,compress=zlib,space_cache,subvolid=5,subvol=/)
[[after fix]]
# mount -o compress /dev/sdb3 /test3
[ 401.021753] BTRFS info (device sdb3): use zlib compression
[ 401.021758] BTRFS info (device sdb3): disk space caching is enabled
[ 401.021760] BTRFS: has skinny extents
# mount | grep /test3
/dev/sdb3 on /test3 type btrfs (rw,relatime,compress=zlib,space_cache,subvolid=5,subvol=/)
# mount -o remount,compress-force /dev/sdb3 /test3
[ 439.824624] BTRFS info (device sdb3): force zlib compression
[ 439.824629] BTRFS info (device sdb3): disk space caching is enabled
# mount | grep /test3
/dev/sdb3 on /test3 type btrfs (rw,relatime,compress-force=zlib,space_cache,subvolid=5,subvol=/)
# mount -o remount,compress /dev/sdb3 /test3
[ 459.918430] BTRFS info (device sdb3): use zlib compression
[ 459.918434] BTRFS info (device sdb3): disk space caching is enabled
# mount | grep /test3
/dev/sdb3 on /test3 type btrfs (rw,relatime,compress=zlib,space_cache,subvolid=5,subvol=/)
Signed-off-by: Tsutomu Itoh <t-itoh@jp.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The following call trace is seen when btrfs/031 test is executed in a loop,
[ 158.661848] ------------[ cut here ]------------
[ 158.662634] WARNING: CPU: 2 PID: 890 at /home/chandan/repos/linux/fs/btrfs/ioctl.c:558 create_subvol+0x3d1/0x6ea()
[ 158.664102] BTRFS: Transaction aborted (error -2)
[ 158.664774] Modules linked in:
[ 158.665266] CPU: 2 PID: 890 Comm: btrfs Not tainted 4.4.0-rc6-g511711a #2
[ 158.666251] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
[ 158.667392] ffffffff81c0a6b0 ffff8806c7c4f8e8 ffffffff81431fc8 ffff8806c7c4f930
[ 158.668515] ffff8806c7c4f920 ffffffff81051aa1 ffff880c85aff000 ffff8800bb44d000
[ 158.669647] ffff8808863b5c98 0000000000000000 00000000fffffffe ffff8806c7c4f980
[ 158.670769] Call Trace:
[ 158.671153] [<ffffffff81431fc8>] dump_stack+0x44/0x5c
[ 158.671884] [<ffffffff81051aa1>] warn_slowpath_common+0x81/0xc0
[ 158.672769] [<ffffffff81051b27>] warn_slowpath_fmt+0x47/0x50
[ 158.673620] [<ffffffff813bc98d>] create_subvol+0x3d1/0x6ea
[ 158.674440] [<ffffffff813777c9>] btrfs_mksubvol.isra.30+0x369/0x520
[ 158.675376] [<ffffffff8108a4aa>] ? percpu_down_read+0x1a/0x50
[ 158.676235] [<ffffffff81377a81>] btrfs_ioctl_snap_create_transid+0x101/0x180
[ 158.677268] [<ffffffff81377b52>] btrfs_ioctl_snap_create+0x52/0x70
[ 158.678183] [<ffffffff8137afb4>] btrfs_ioctl+0x474/0x2f90
[ 158.678975] [<ffffffff81144b8e>] ? vma_merge+0xee/0x300
[ 158.679751] [<ffffffff8115be31>] ? alloc_pages_vma+0x91/0x170
[ 158.680599] [<ffffffff81123f62>] ? lru_cache_add_active_or_unevictable+0x22/0x70
[ 158.681686] [<ffffffff813d99cf>] ? selinux_file_ioctl+0xff/0x1d0
[ 158.682581] [<ffffffff8117b791>] do_vfs_ioctl+0x2c1/0x490
[ 158.683399] [<ffffffff813d3cde>] ? security_file_ioctl+0x3e/0x60
[ 158.684297] [<ffffffff8117b9d4>] SyS_ioctl+0x74/0x80
[ 158.685051] [<ffffffff819b2bd7>] entry_SYSCALL_64_fastpath+0x12/0x6a
[ 158.685958] ---[ end trace 4b63312de5a2cb76 ]---
[ 158.686647] BTRFS: error (device loop0) in create_subvol:558: errno=-2 No such entry
[ 158.709508] BTRFS info (device loop0): forced readonly
[ 158.737113] BTRFS info (device loop0): disk space caching is enabled
[ 158.738096] BTRFS error (device loop0): Remounting read-write after error is not allowed
[ 158.851303] BTRFS error (device loop0): cleaner transaction attach returned -30
This occurs because,
Mount filesystem
Create subvol with ID 257
Unmount filesystem
Mount filesystem
Delete subvol with ID 257
btrfs_drop_snapshot()
Add root corresponding to subvol 257 into
btrfs_transaction->dropped_roots list
Create new subvol (i.e. create_subvol())
257 is returned as the next free objectid
btrfs_read_fs_root_no_name()
Finds the btrfs_root instance corresponding to the old subvol with ID 257
in btrfs_fs_info->fs_roots_radix.
Returns error since btrfs_root_item->refs has the value of 0.
To fix the issue the commit initializes tree root's and subvolume root's
highest_objectid when loading the roots from disk.
Signed-off-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Overloading extent_map->bdev to struct map_lookup * might have started out
as a means to an end, but it's a pattern that's used all over the place
now. Let's get rid of the casting and just add a union instead.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Mark those kmem allocations that are known to be easily triggered from
userspace as __GFP_ACCOUNT/SLAB_ACCOUNT, which makes them accounted to
memcg. For the list, see below:
- threadinfo
- task_struct
- task_delay_info
- pid
- cred
- mm_struct
- vm_area_struct and vm_region (nommu)
- anon_vma and anon_vma_chain
- signal_struct
- sighand_struct
- fs_struct
- files_struct
- fdtable and fdtable->full_fds_bits
- dentry and external_name
- inode for all filesystems. This is the most tedious part, because
most filesystems overwrite the alloc_inode method.
The list is far from complete, so feel free to add more objects.
Nevertheless, it should be close to "account everything" approach and
keep most workloads within bounds. Malevolent users will be able to
breach the limit, but this was possible even with the former "account
everything" approach (simply because it did not account everything in
fact).
[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Vladimir Davydov <vdavydov@virtuozzo.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Greg Thelen <gthelen@google.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull misc vfs updates from Al Viro:
"All kinds of stuff. That probably should've been 5 or 6 separate
branches, but by the time I'd realized how large and mixed that bag
had become it had been too close to -final to play with rebasing.
Some fs/namei.c cleanups there, memdup_user_nul() introduction and
switching open-coded instances, burying long-dead code, whack-a-mole
of various kinds, several new helpers for ->llseek(), assorted
cleanups and fixes from various people, etc.
One piece probably deserves special mention - Neil's
lookup_one_len_unlocked(). Similar to lookup_one_len(), but gets
called without ->i_mutex and tries to avoid ever taking it. That, of
course, means that it's not useful for any directory modifications,
but things like getting inode attributes in nfds readdirplus are fine
with that. I really should've asked for moratorium on lookup-related
changes this cycle, but since I hadn't done that early enough... I
*am* asking for that for the coming cycle, though - I'm going to try
and get conversion of i_mutex to rwsem with ->lookup() done under lock
taken shared.
There will be a patch closer to the end of the window, along the lines
of the one Linus had posted last May - mechanical conversion of
->i_mutex accesses to inode_lock()/inode_unlock()/inode_trylock()/
inode_is_locked()/inode_lock_nested(). To quote Linus back then:
-----
| This is an automated patch using
|
| sed 's/mutex_lock(&\(.*\)->i_mutex)/inode_lock(\1)/'
| sed 's/mutex_unlock(&\(.*\)->i_mutex)/inode_unlock(\1)/'
| sed 's/mutex_lock_nested(&\(.*\)->i_mutex,[ ]*I_MUTEX_\([A-Z0-9_]*\))/inode_lock_nested(\1, I_MUTEX_\2)/'
| sed 's/mutex_is_locked(&\(.*\)->i_mutex)/inode_is_locked(\1)/'
| sed 's/mutex_trylock(&\(.*\)->i_mutex)/inode_trylock(\1)/'
|
| with a very few manual fixups
-----
I'm going to send that once the ->i_mutex-affecting stuff in -next
gets mostly merged (or when Linus says he's about to stop taking
merges)"
* 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (63 commits)
nfsd: don't hold i_mutex over userspace upcalls
fs:affs:Replace time_t with time64_t
fs/9p: use fscache mutex rather than spinlock
proc: add a reschedule point in proc_readfd_common()
logfs: constify logfs_block_ops structures
fcntl: allow to set O_DIRECT flag on pipe
fs: __generic_file_splice_read retry lookup on AOP_TRUNCATED_PAGE
fs: xattr: Use kvfree()
[s390] page_to_phys() always returns a multiple of PAGE_SIZE
nbd: use ->compat_ioctl()
fs: use block_device name vsprintf helper
lib/vsprintf: add %*pg format specifier
fs: use gendisk->disk_name where possible
poll: plug an unused argument to do_poll
amdkfd: don't open-code memdup_user()
cdrom: don't open-code memdup_user()
rsxx: don't open-code memdup_user()
mtip32xx: don't open-code memdup_user()
[um] mconsole: don't open-code memdup_user_nul()
[um] hostaudio: don't open-code memdup_user()
...
Pull vfs copy_file_range updates from Al Viro:
"Several series around copy_file_range/CLONE"
* 'work.copy_file_range' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
btrfs: use new dedupe data function pointer
vfs: hoist the btrfs deduplication ioctl to the vfs
vfs: wire up compat ioctl for CLONE/CLONE_RANGE
cifs: avoid unused variable and label
nfsd: implement the NFSv4.2 CLONE operation
nfsd: Pass filehandle to nfs4_preprocess_stateid_op()
vfs: pull btrfs clone API to vfs layer
locks: new locks_mandatory_area calling convention
vfs: Add vfs_copy_file_range() support for pagecache copies
btrfs: add .copy_file_range file operation
x86: add sys_copy_file_range to syscall tables
vfs: add copy_file_range syscall and vfs helper
Pull vfs xattr updates from Al Viro:
"Andreas' xattr cleanup series.
It's a followup to his xattr work that went in last cycle; -0.5KLoC"
* 'work.xattr' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
xattr handlers: Simplify list operation
ocfs2: Replace list xattr handler operations
nfs: Move call to security_inode_listsecurity into nfs_listxattr
xfs: Change how listxattr generates synthetic attributes
tmpfs: listxattr should include POSIX ACL xattrs
tmpfs: Use xattr handler infrastructure
btrfs: Use xattr handler infrastructure
vfs: Distinguish between full xattr names and proper prefixes
posix acls: Remove duplicate xattr name definitions
gfs2: Remove gfs2_xattr_acl_chmod
vfs: Remove vfs_xattr_cmp
Pull vfs RCU symlink updates from Al Viro:
"Replacement of ->follow_link/->put_link, allowing to stay in RCU mode
even if the symlink is not an embedded one.
No changes since the mailbomb on Jan 1"
* 'work.symlinks' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
switch ->get_link() to delayed_call, kill ->put_link()
kill free_page_put_link()
teach nfs_get_link() to work in RCU mode
teach proc_self_get_link()/proc_thread_self_get_link() to work in RCU mode
teach shmem_get_link() to work in RCU mode
teach page_get_link() to work in RCU mode
replace ->follow_link() with new method that could stay in RCU mode
don't put symlink bodies in pagecache into highmem
namei: page_getlink() and page_follow_link_light() are the same thing
ufs: get rid of ->setattr() for symlinks
udf: don't duplicate page_symlink_inode_operations
logfs: don't duplicate page_symlink_inode_operations
switch befs long symlinks to page_symlink_operations
As of the 4.3 kernel release, the fitrim ioctl can now discard any region
of a disk that is not allocated to any chunk/block group, including the
first megabyte which is used for our primary superblock and by the boot
loader (grub for example).
Fix this by not allowing to trim/discard any region in the device starting
with an offset not greater than min(alloc_start_mount_option, 1Mb), just
as it was not possible before 4.3.
A reproducer test case for xfstests follows.
seq=`basename $0`
seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
tmp=/tmp/$$
status=1 # failure is the default!
trap "_cleanup; exit \$status" 0 1 2 3 15
_cleanup()
{
cd /
rm -f $tmp.*
}
# get standard environment, filters and checks
. ./common/rc
. ./common/filter
# real QA test starts here
_need_to_be_root
_supported_fs btrfs
_supported_os Linux
_require_scratch
rm -f $seqres.full
_scratch_mkfs >>$seqres.full 2>&1
# Write to the [0, 64Kb[ and [68Kb, 1Mb[ ranges of the device. These ranges are
# reserved for a boot loader to use (GRUB for example) and btrfs should never
# use them - neither for allocating metadata/data nor should trim/discard them.
# The range [64Kb, 68Kb[ is used for the primary superblock of the filesystem.
$XFS_IO_PROG -c "pwrite -S 0xfd 0 64K" $SCRATCH_DEV | _filter_xfs_io
$XFS_IO_PROG -c "pwrite -S 0xfd 68K 956K" $SCRATCH_DEV | _filter_xfs_io
# Now mount the filesystem and perform a fitrim against it.
_scratch_mount
_require_batched_discard $SCRATCH_MNT
$FSTRIM_PROG $SCRATCH_MNT
# Now unmount the filesystem and verify the content of the ranges was not
# modified (no trim/discard happened on them).
_scratch_unmount
echo "Content of the ranges [0, 64Kb] and [68Kb, 1Mb[ after fitrim:"
od -t x1 -N $((64 * 1024)) $SCRATCH_DEV
od -t x1 -j $((68 * 1024)) -N $((956 * 1024)) $SCRATCH_DEV
status=0
exit
Reported-by: Vincent Petry <PVince81@yahoo.fr>
Reported-by: Andrei Borzenkov <arvidjaar@gmail.com>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=109341
Fixes: 499f377f49 (btrfs: iterate over unused chunk space in FITRIM)
Cc: stable@vger.kernel.org # 4.3+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
When converting a filesystem via balance check that metadata mode
is at least as redundant as the data mode. For example give warning
when:
-dconvert=raid1 -mconvert=single
Signed-off-by: Sam Tygier <samtygier@yahoo.co.uk>
[ minor message reformatting ]
Signed-off-by: David Sterba <dsterba@suse.com>
There is one ENOSPC case that's very confusing. There's Available
greater than zero but no file operation succeds (besides removing
files). This happens when the metadata are exhausted and there's no
possibility to allocate another chunk.
In this scenario it's normal that there's still some space in the data
chunk and the calculation in df reflects that in the Avail value.
To at least give some clue about the ENOSPC situation, let statfs report
zero value in Avail, even if there's still data space available.
Current:
/dev/sdb1 4.0G 3.3G 719M 83% /mnt/test
New:
/dev/sdb1 4.0G 3.3G 0 100% /mnt/test
We calculate the remaining metadata space minus global reserve. If this
is (supposedly) smaller than zero, there's no space. But this does not
hold in practice, the exhausted state happens where's still some
positive delta. So we apply some guesswork and compare the delta to a 4M
threshold. (Practically observed delta was 2M.)
We probably cannot calculate the exact threshold value because this
depends on the internal reservations requested by various operations, so
some operations that consume a few metadata will succeed even if the
Avail is zero. But this is better than the other way around.
Signed-off-by: David Sterba <dsterba@suse.com>
We can also preallocate btrfs_path that's used during pending snapshot
creation and avoid another late ENOMEM failure.
Signed-off-by: David Sterba <dsterba@suse.com>
The actual snapshot creation is delayed until transaction commit. If we
cannot get enough memory for the root item there, we have to fail the
whole transaction commit which is bad. So we'll allocate the memory at
the ioctl call and pass it along with the pending_snapshot struct. The
potential ENOMEM will be returned to the caller of snapshot ioctl.
Signed-off-by: David Sterba <dsterba@suse.com>
The values of btrfs_path::locks are 0 to 4, fit into a u8. Let's see:
* overall size of btrfs_path drops down from 136 to 112 (-24 bytes),
* better packing in a slab page +6 objects
* the whole structure now fits to 2 cachelines
* slight decrease in code size:
text data bss dec hex filename
938731 43670 23144 1005545 f57e9 fs/btrfs/btrfs.ko.before
938203 43670 23144 1005017 f55d9 fs/btrfs/btrfs.ko.after
(and the generated assembly does not change much)
The main purpose is to decrease the size of the structure without
affecting performance. The byte access is usually well behaving accross
arches, the locks are not accessed frequently and sometimes just
compared to zero.
Note for further size reduction attempts: the slots could be made u16
but this might generate worse code on some arches (non-byte and non-int
access). Also the range of operations on slots is wider compared to
locks and the potential performance drop should be evaluated first.
Signed-off-by: David Sterba <dsterba@suse.com>
The level is 0..7, we can use smaller type. The size of btrfs_path is now
136 bytes from 144, which is +2 objects that fit into a 4k slab.
Signed-off-by: David Sterba <dsterba@suse.com>
The possible values for reada are all positive and bounded, we can later
save some bytes by storing it in u8.
Signed-off-by: David Sterba <dsterba@suse.com>
Replace the integers by enums for better readability. The value 2 does
not have any meaning since a717531942
"Btrfs: do less aggressive btree readahead" (2009-01-22).
Signed-off-by: David Sterba <dsterba@suse.com>
There are a few statically initialized arrays that can be made const.
The remaining (like file_system_type, sysfs attributes or prop handlers)
do not allow that due to type mismatch when passed to the APIs or
because the structures are modified through other members.
Signed-off-by: David Sterba <dsterba@suse.com>
Preparatory work for making btrfs_free_space_op constant. In
test_steal_space_from_bitmap_to_extent, we substitute use_bitmap with
own version thus preventing constification. We can rework it so we
replace the whole structure with the correct function pointers.
Signed-off-by: David Sterba <dsterba@suse.com>
Use list_for_each_entry*() to simplify the code.
Signed-off-by: Geliang Tang <geliangtang@163.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Use list_for_each_entry_safe() instead of list_for_each_safe() to
simplify the code.
Signed-off-by: Geliang Tang <geliangtang@163.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Use list_for_each_entry*() instead of list_for_each*() to simplify
the code.
Signed-off-by: Geliang Tang <geliangtang@163.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We use many constants to represent size and offset value. And to make
code readable we use '256 * 1024 * 1024' instead of '268435456' to
represent '256MB'. However we can make far more readable with 'SZ_256MB'
which is defined in the 'linux/sizes.h'.
So this patch replaces 'xxx * 1024 * 1024' kind of expression with
single 'SZ_xxxMB' if 'xxx' is a power of 2 then 'xxx * SZ_1M' if 'xxx' is
not a power of 2. And I haven't touched to '4096' & '8192' because it's
more intuitive than 'SZ_4KB' & 'SZ_8KB'.
Signed-off-by: Byongho Lee <bhlee.kernel@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
It's slightly cleaner to zero-out the delayed node upon allocation
than to do it by hand in btrfs_init_delayed_node() for a few members
Signed-off-by: Alexandru Moise <00moses.alexander00@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Alexandru Moise <00moses.alexander00@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Conform to __btrfs_fs_incompat() cast-to-bool (!!) by explicitly
returning boolean not int.
Signed-off-by: Alexandru Moise <00moses.alexander00@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The inode argument is never used from the beginning, so remove it.
Signed-off-by: Byongho Lee <bhlee.kernel@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Although we prefer to use separate caches for various structs, it seems
better not to do that for struct btrfs_delalloc_work. Objects of this
type are allocated rarely, when transaction commit calls
btrfs_start_delalloc_roots, requesting delayed iputs.
The objects are temporary (with some IO involved) but still allocated
and freed within __start_delalloc_inodes. Memory allocation failure is
handled.
The slab cache is empty most of the time (observed on several systems),
so if we need to allocate a new slab object, the first one has to
allocate a full page. In a potential case of low memory conditions this
might fail with higher probability compared to using the generic slab
caches.
Signed-off-by: David Sterba <dsterba@suse.com>
We can handle the special case of num_stripes == 0 directly inside
btrfs_read_sys_array. The BUG_ON in btrfs_chunk_item_size is there to
catch other unhandled cases where we fail to validate external data.
A crafted or corrupted image crashes at mount time:
BTRFS: device fsid 9006933e-2a9a-44f0-917f-514252aeec2c devid 1 transid 7 /dev/loop0
BTRFS info (device loop0): disk space caching is enabled
BUG: failure at fs/btrfs/ctree.h:337/btrfs_chunk_item_size()!
Kernel panic - not syncing: BUG!
CPU: 0 PID: 313 Comm: mount Not tainted 4.2.5-00657-ge047887-dirty #25
Stack:
637af890 60062489 602aeb2e 604192ba
60387961 00000011 637af8a0 6038a835
637af9c0 6038776b 634ef32b 00000000
Call Trace:
[<6001c86d>] show_stack+0xfe/0x15b
[<6038a835>] dump_stack+0x2a/0x2c
[<6038776b>] panic+0x13e/0x2b3
[<6020f099>] btrfs_read_sys_array+0x25d/0x2ff
[<601cfbbe>] open_ctree+0x192d/0x27af
[<6019c2c1>] btrfs_mount+0x8f5/0xb9a
[<600bc9a7>] mount_fs+0x11/0xf3
[<600d5167>] vfs_kern_mount+0x75/0x11a
[<6019bcb0>] btrfs_mount+0x2e4/0xb9a
[<600bc9a7>] mount_fs+0x11/0xf3
[<600d5167>] vfs_kern_mount+0x75/0x11a
[<600d710b>] do_mount+0xa35/0xbc9
[<600d7557>] SyS_mount+0x95/0xc8
[<6001e884>] handle_syscall+0x6b/0x8e
Reported-by: Jiri Slaby <jslaby@suse.com>
Reported-by: Vegard Nossum <vegard.nossum@oracle.com>
CC: stable@vger.kernel.org # 3.19+
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_delayed_extent_op can be packed in a better way, it's 40 bytes now
and has 8 unused bytes. Reducing the level type to u8 makes it possible
to squeeze it to the padding byte after key. The bitfields were switched
to bool as there's space to store the full byte without increasing the
whole structure, besides that the generated assembly is smaller.
struct btrfs_delayed_extent_op {
struct btrfs_disk_key key; /* 0 17 */
u8 level; /* 17 1 */
bool update_key; /* 18 1 */
bool update_flags; /* 19 1 */
bool is_data; /* 20 1 */
/* XXX 3 bytes hole, try to pack */
u64 flags_to_set; /* 24 8 */
/* size: 32, cachelines: 1, members: 6 */
/* sum members: 29, holes: 1, sum holes: 3 */
/* last cacheline: 32 bytes */
};
The final size is 32 bytes which gives +26 object per slab page.
text data bss dec hex filename
938811 43670 23144 1005625 f5839 fs/btrfs/btrfs.ko.before
938747 43670 23144 1005561 f57f9 fs/btrfs/btrfs.ko.after
Signed-off-by: David Sterba <dsterba@suse.com>
Inodes for delayed iput allocate a trivial helper structure, let's place
the list hook directly into the inode and save a kmalloc (killing a
__GFP_NOFAIL as a bonus) at the cost of increasing size of btrfs_inode.
The inode can be put into the delayed_iputs list more than once and we
have to keep the count. This means we can't use the list_splice to
process a bunch of inodes because we'd lost track of the count if the
inode is put into the delayed iputs again while it's processed.
Signed-off-by: David Sterba <dsterba@suse.com>
Since we will add support for -d dup for non-mixed filesystem,
kernel need to support converting to this raid-type.
This patch remove limitation of above case.
Tested by following script:
(combination of dup conversion with fsck):
export TEST_DEV='/dev/vdc'
export TEST_DIR='/var/ltf/tester/mnt'
do_dup_test()
{
local m_from="$1"
local d_from="$2"
local m_to="$3"
local d_to="$4"
echo "Convert from -m $m_from -d $d_from to -m $m_to -d $d_to"
umount "$TEST_DIR" &>/dev/null
./mkfs.btrfs -f -m "$m_from" -d "$d_from" "$TEST_DEV" >/dev/null || return 1
mount "$TEST_DEV" "$TEST_DIR" || return 1
cp -a /sbin/* "$TEST_DIR"
[[ "$m_from" != "$m_to" ]] && {
./btrfs balance start -f -mconvert="$m_to" "$TEST_DIR" || return 1
}
[[ "$d_from" != "$d_to" ]] && {
local opt=()
[[ "$d_to" == single ]] && opt+=("-f")
./btrfs balance start "${opt[@]}" -dconvert="$d_to" "$TEST_DIR" || return 1
}
umount "$TEST_DIR" || return 1
./btrfsck "$TEST_DEV" || return 1
echo
return 0
}
test_all()
{
for m_from in single dup; do
for d_from in single dup; do
for m_to in single dup; do
for d_to in single dup; do
do_dup_test "$m_from" "$d_from" "$m_to" "$d_to" || return 1
done
done
done
done
}
test_all
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We hit this panic on a few of our boxes this week where we have an
ordered_extent with an NULL inode. We do an igrab() of the inode in writepages,
but weren't doing it in writepage which can be called directly from the VM on
dirty pages. If the inode has been unlinked then we could have I_FREEING set
which means igrab() would return NULL and we get this panic. Fix this by trying
to igrab in btrfs_writepage, and if it returns NULL then just redirty the page
and return AOP_WRITEPAGE_ACTIVATE; so the VM knows it wasn't successful. Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Looks like oversight, call brelse() when checksum fails. Further down the
code, in the non error path, we do call brelse() and so we don't see
brelse() in the goto error paths.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
If we failed to create a hard link we were not always releasing the
the transaction handle we got before, resulting in a memory leak and
preventing any other tasks from being able to commit the current
transaction.
Fix this by always releasing our transaction handle.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Now that the VFS encapsulates the dedupe ioctl, wire up btrfs to it.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
We weren't accounting for the insertion of an inline extent item for the
symlink inode nor that we need to update the parent inode item (through
the call to btrfs_add_nondir()). So fix this by including two more
transaction units.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
When we are creating a symlink we might fail with an error after we
created its inode and added the corresponding directory indexes to its
parent inode. In this case we end up never removing the directory indexes
because the inode eviction handler, called for our symlink inode on the
final iput(), only removes items associated with the symlink inode and
not with the parent inode.
Example:
$ mkfs.btrfs -f /dev/sdi
$ mount /dev/sdi /mnt
$ touch /mnt/foo
$ ln -s /mnt/foo /mnt/bar
ln: failed to create symbolic link ‘bar’: Cannot allocate memory
$ umount /mnt
$ btrfsck /dev/sdi
Checking filesystem on /dev/sdi
UUID: d5acb5ba-31bd-42da-b456-89dca2e716e1
checking extents
checking free space cache
checking fs roots
root 5 inode 258 errors 2001, no inode item, link count wrong
unresolved ref dir 256 index 3 namelen 3 name bar filetype 7 errors 4, no inode ref
found 131073 bytes used err is 1
total csum bytes: 0
total tree bytes: 131072
total fs tree bytes: 32768
total extent tree bytes: 16384
btree space waste bytes: 124305
file data blocks allocated: 262144
referenced 262144
btrfs-progs v4.2.3
So fix this by adding the directory index entries as the very last
step of symlink creation.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
When a symlink is successfully created it always has an inline extent
containing the source path. However if an error happens when creating
the symlink, we can leave in the subvolume's tree a symlink inode without
any such inline extent item - this happens if after btrfs_symlink() calls
btrfs_end_transaction() and before it calls the inode eviction handler
(through the final iput() call), the transaction gets committed and a
crash happens before the eviction handler gets called, or if a snapshot
of the subvolume is made before the eviction handler gets called. Sadly
we can't just avoid this by making btrfs_symlink() call
btrfs_end_transaction() after it calls the eviction handler, because the
later can commit the current transaction before it removes any items from
the subvolume tree (if it encounters ENOSPC errors while reserving space
for removing all the items).
So make send fail more gracefully, with an -EIO error, and print a
message to dmesg/syslog informing that there's an empty symlink inode,
so that the user can delete the empty symlink or do something else
about it.
Reported-by: Stephen R. van den Berg <srb@cuci.nl>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
While running a stress test I ran into the following trace/transaction
abort:
[471626.672243] ------------[ cut here ]------------
[471626.673322] WARNING: CPU: 9 PID: 19107 at fs/btrfs/extent-tree.c:3740 btrfs_write_dirty_block_groups+0x17c/0x214 [btrfs]()
[471626.675492] BTRFS: Transaction aborted (error -2)
[471626.676748] Modules linked in: btrfs dm_flakey dm_mod crc32c_generic xor raid6_pq nfsd auth_rpcgss oid_registry nfs_acl nfs lockd grace fscache sunrpc loop fuse parport_pc i2c_piix
[471626.688802] CPU: 14 PID: 19107 Comm: fsstress Tainted: G W 4.3.0-rc5-btrfs-next-17+ #1
[471626.690148] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.8.1-0-g4adadbd-20150316_085822-nilsson.home.kraxel.org 04/01/2014
[471626.691901] 0000000000000000 ffff880016037cf0 ffffffff812566f4 ffff880016037d38
[471626.695009] ffff880016037d28 ffffffff8104d0a6 ffffffffa040c84e 00000000fffffffe
[471626.697490] ffff88011fe855f8 ffff88000c484cb0 ffff88000d195000 ffff880016037d90
[471626.699201] Call Trace:
[471626.699804] [<ffffffff812566f4>] dump_stack+0x4e/0x79
[471626.701049] [<ffffffff8104d0a6>] warn_slowpath_common+0x9f/0xb8
[471626.702542] [<ffffffffa040c84e>] ? btrfs_write_dirty_block_groups+0x17c/0x214 [btrfs]
[471626.704326] [<ffffffff8104d107>] warn_slowpath_fmt+0x48/0x50
[471626.705636] [<ffffffffa0403717>] ? write_one_cache_group.isra.32+0x77/0x82 [btrfs]
[471626.707048] [<ffffffffa040c84e>] btrfs_write_dirty_block_groups+0x17c/0x214 [btrfs]
[471626.708616] [<ffffffffa048a50a>] commit_cowonly_roots+0x1d7/0x25a [btrfs]
[471626.709950] [<ffffffffa041e34a>] btrfs_commit_transaction+0x4c4/0x991 [btrfs]
[471626.711286] [<ffffffff81081c61>] ? signal_pending_state+0x31/0x31
[471626.712611] [<ffffffffa03f6df4>] btrfs_sync_fs+0x145/0x1ad [btrfs]
[471626.715610] [<ffffffff811962a2>] ? SyS_tee+0x226/0x226
[471626.716718] [<ffffffff811962c2>] sync_fs_one_sb+0x20/0x22
[471626.717672] [<ffffffff8116fc01>] iterate_supers+0x75/0xc2
[471626.718800] [<ffffffff8119669a>] sys_sync+0x52/0x80
[471626.719990] [<ffffffff8147cd97>] entry_SYSCALL_64_fastpath+0x12/0x6f
[471626.721835] ---[ end trace baf57f43d76693f4 ]---
[471626.722954] BTRFS: error (device sdc) in btrfs_write_dirty_block_groups:3740: errno=-2 No such entry
This is a very rare situation and it happened due to a race between a free
space endio worker and writing the space caches for dirty block groups at
a transaction's commit critical section. The steps leading to this are:
1) A task calls btrfs_commit_transaction() and starts the writeout of the
space caches for all currently dirty block groups (i.e. it calls
btrfs_start_dirty_block_groups());
2) The previous step starts writeback for space caches;
3) When the writeback finishes it queues jobs for free space endio work
queue (fs_info->endio_freespace_worker) that execute
btrfs_finish_ordered_io();
4) The task committing the transaction sets the transaction's state
to TRANS_STATE_COMMIT_DOING and shortly after calls
btrfs_write_dirty_block_groups();
5) A free space endio job joins the transaction, through
btrfs_join_transaction_nolock(), and updates a free space inode item
in the root tree through btrfs_update_inode_fallback();
6) Updating the free space inode item resulted in COWing one or more
nodes/leaves of the root tree, and that resulted in creating a new
metadata block group, which gets added to the transaction's list
of dirty block groups (this is a very rare case);
7) The free space endio job has not released yet its transaction handle
at this point, so the new metadata block group was not yet fully
created (didn't go through btrfs_create_pending_block_groups() yet);
8) The transaction commit task sees the new metadata block group in
the transaction's list of dirty block groups and processes it.
When it attempts to update the block group's block group item in
the extent tree, through write_one_cache_group(), it isn't able
to find it and aborts the transaction with error -ENOENT - this
is because the free space endio job hasn't yet released its
transaction handle (which calls btrfs_create_pending_block_groups())
and therefore the block group item was not yet added to the extent
tree.
Fix this waiting for free space endio jobs if we fail to find a block
group item in the extent tree and then retry once updating the block
group item.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
This is a short term solution to make sure btrfs_run_delayed_refs()
doesn't change the extent tree while we are scanning it to create the
free space tree.
Longer term we need to synchronize scanning the block groups one by one,
similar to what happens during a balance.
Signed-off-by: Chris Mason <clm@fb.com>
We call btrfs_write_dirty_block_groups() in the critical section of a
transaction's commit, when no other tasks can join the transaction and
add more block groups to the transaction's list of dirty block groups,
so we not taking the dirty block groups spinlock when checking for the
list's emptyness, grabbing its first element or deleting elements from
it.
However there's a special and rare case where we can have a concurrent
task adding elements to this list. We trigger writeback for space
caches before at btrfs_start_dirty_block_groups() and in past iterations
of the loop at btrfs_write_dirty_block_groups(), this means that when
the writeback finishes (which happens asynchronously) it creates a
task for the endio free space work queue that executes
btrfs_finish_ordered_io() - this function is able to join the transaction,
through btrfs_join_transaction_nolock(), and update the free space cache's
inode item in the root tree, which can result in COWing nodes of this tree
and therefore allocation of a new block group can happen, which gets added
to the transaction's list of dirty block groups while the transaction
commit task is operating on it concurrently.
So fix this by taking the dirty block groups spinlock before doing
operations on the dirty block groups list at
btrfs_write_dirty_block_groups().
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Those are stupid and code should use static_cpu_has_safe() or
boot_cpu_has() instead. Kill the least used and unused ones.
The remaining ones need more careful inspection before a conversion can
happen. On the TODO.
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: http://lkml.kernel.org/r/1449481182-27541-4-git-send-email-bp@alien8.de
Cc: David Sterba <dsterba@suse.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Chris Mason <clm@fb.com>
Cc: Josef Bacik <jbacik@fb.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Pull btrfs fixes from Chris Mason:
"A couple of small fixes"
* 'for-linus-4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
Btrfs: check prepare_uptodate_page() error code earlier
Btrfs: check for empty bitmap list in setup_cluster_bitmaps
btrfs: fix misleading warning when space cache failed to load
Btrfs: fix transaction handle leak in balance
Btrfs: fix unprotected list move from unused_bgs to deleted_bgs list
When running fstests btrfs/070, with a higher number of fsstress
operations, I ran frequently into two different locking bugs when
defragging directories.
The first bug produced the following traces:
[133860.229792] ------------[ cut here ]------------
[133860.251062] WARNING: CPU: 2 PID: 26057 at fs/btrfs/locking.c:46 btrfs_set_lock_blocking_rw+0x57/0xbd [btrfs]()
[133860.253576] Modules linked in: btrfs crc32c_generic xor raid6_pq nfsd auth_rpcgss oid_registry nfs_acl nfs lockd grace fscache sunrpc loop fuse parport_pc i2c_piix4 psmouse parport
[133860.282566] CPU: 2 PID: 26057 Comm: btrfs Tainted: G W 4.3.0-rc5-btrfs-next-17+ #1
[133860.284393] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.8.1-0-g4adadbd-20150316_085822-nilsson.home.kraxel.org 04/01/2014
[133860.286827] 0000000000000000 ffff880207697b78 ffffffff812566f4 0000000000000000
[133860.288341] ffff880207697bb0 ffffffff8104d0a6 ffffffffa052d4c1 ffff880178f60e00
[133860.294219] ffff880178f60e00 0000000000000000 00000000000000f6 ffff880207697bc0
[133860.295831] Call Trace:
[133860.306518] [<ffffffff812566f4>] dump_stack+0x4e/0x79
[133860.307473] [<ffffffff8104d0a6>] warn_slowpath_common+0x9f/0xb8
[133860.308619] [<ffffffffa052d4c1>] ? btrfs_set_lock_blocking_rw+0x57/0xbd [btrfs]
[133860.310068] [<ffffffff8104d172>] warn_slowpath_null+0x1a/0x1c
[133860.312552] [<ffffffffa052d4c1>] btrfs_set_lock_blocking_rw+0x57/0xbd [btrfs]
[133860.314630] [<ffffffffa04d5787>] btrfs_set_lock_blocking+0xe/0x10 [btrfs]
[133860.323596] [<ffffffffa04d99cb>] btrfs_realloc_node+0xb3/0x341 [btrfs]
[133860.325233] [<ffffffffa050e396>] btrfs_defrag_leaves+0x239/0x2fa [btrfs]
[133860.332427] [<ffffffffa04fc2ce>] btrfs_defrag_root+0x63/0xca [btrfs]
[133860.337259] [<ffffffffa052a34e>] btrfs_ioctl_defrag+0x78/0x14e [btrfs]
[133860.340147] [<ffffffffa052b00b>] btrfs_ioctl+0x746/0x24c6 [btrfs]
[133860.344833] [<ffffffff81087481>] ? arch_local_irq_save+0x9/0xc
[133860.346343] [<ffffffff8113ad61>] ? __might_fault+0x4c/0xa7
[133860.353248] [<ffffffff8113ad61>] ? __might_fault+0x4c/0xa7
[133860.354242] [<ffffffff8113adba>] ? __might_fault+0xa5/0xa7
[133860.355232] [<ffffffff81171139>] ? cp_new_stat+0x15d/0x174
[133860.356237] [<ffffffff8117c610>] do_vfs_ioctl+0x427/0x4e6
[133860.358587] [<ffffffff81171175>] ? SYSC_newfstat+0x25/0x2e
[133860.360195] [<ffffffff8118574d>] ? __fget_light+0x4d/0x71
[133860.361380] [<ffffffff8117c726>] SyS_ioctl+0x57/0x79
[133860.363578] [<ffffffff8147cd97>] entry_SYSCALL_64_fastpath+0x12/0x6f
[133860.366217] ---[ end trace 2cadb2f653437e49 ]---
[133860.367399] ------------[ cut here ]------------
[133860.368162] kernel BUG at fs/btrfs/locking.c:307!
[133860.369430] invalid opcode: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC
[133860.370205] Modules linked in: btrfs crc32c_generic xor raid6_pq nfsd auth_rpcgss oid_registry nfs_acl nfs lockd grace fscache sunrpc loop fuse parport_pc i2c_piix4 psmouse parport
[133860.370205] CPU: 2 PID: 26057 Comm: btrfs Tainted: G W 4.3.0-rc5-btrfs-next-17+ #1
[133860.370205] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.8.1-0-g4adadbd-20150316_085822-nilsson.home.kraxel.org 04/01/2014
[133860.370205] task: ffff8800aec6db40 ti: ffff880207694000 task.ti: ffff880207694000
[133860.370205] RIP: 0010:[<ffffffffa052d466>] [<ffffffffa052d466>] btrfs_assert_tree_locked+0x10/0x14 [btrfs]
[133860.370205] RSP: 0018:ffff880207697bc0 EFLAGS: 00010246
[133860.370205] RAX: 0000000000000000 RBX: ffff880178f60e00 RCX: 0000000000000000
[133860.370205] RDX: ffff88023ec4fb50 RSI: 00000000ffffffff RDI: ffff880178f60e00
[133860.370205] RBP: ffff880207697bc0 R08: 0000000000000001 R09: 0000000000000000
[133860.370205] R10: 0000160000000000 R11: ffffffff81651000 R12: ffff880178f60e00
[133860.370205] R13: 0000000000000000 R14: 00000000000000f6 R15: ffff8801ff409000
[133860.370205] FS: 00007f763efd48c0(0000) GS:ffff88023ec40000(0000) knlGS:0000000000000000
[133860.370205] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[133860.370205] CR2: 0000000002158048 CR3: 000000003fd6c000 CR4: 00000000000006e0
[133860.370205] Stack:
[133860.370205] ffff880207697bd8 ffffffffa052d4d0 0000000000000000 ffff880207697be8
[133860.370205] ffffffffa04d5787 ffff880207697c80 ffffffffa04d99cb ffff8801ff409590
[133860.370205] ffff880207697ca8 000000f507697c80 ffff880183c11bb8 0000000000000000
[133860.370205] Call Trace:
[133860.370205] [<ffffffffa052d4d0>] btrfs_set_lock_blocking_rw+0x66/0xbd [btrfs]
[133860.370205] [<ffffffffa04d5787>] btrfs_set_lock_blocking+0xe/0x10 [btrfs]
[133860.370205] [<ffffffffa04d99cb>] btrfs_realloc_node+0xb3/0x341 [btrfs]
[133860.370205] [<ffffffffa050e396>] btrfs_defrag_leaves+0x239/0x2fa [btrfs]
[133860.370205] [<ffffffffa04fc2ce>] btrfs_defrag_root+0x63/0xca [btrfs]
[133860.370205] [<ffffffffa052a34e>] btrfs_ioctl_defrag+0x78/0x14e [btrfs]
[133860.370205] [<ffffffffa052b00b>] btrfs_ioctl+0x746/0x24c6 [btrfs]
[133860.370205] [<ffffffff81087481>] ? arch_local_irq_save+0x9/0xc
[133860.370205] [<ffffffff8113ad61>] ? __might_fault+0x4c/0xa7
[133860.370205] [<ffffffff8113ad61>] ? __might_fault+0x4c/0xa7
[133860.370205] [<ffffffff8113adba>] ? __might_fault+0xa5/0xa7
[133860.370205] [<ffffffff81171139>] ? cp_new_stat+0x15d/0x174
[133860.370205] [<ffffffff8117c610>] do_vfs_ioctl+0x427/0x4e6
[133860.370205] [<ffffffff81171175>] ? SYSC_newfstat+0x25/0x2e
[133860.370205] [<ffffffff8118574d>] ? __fget_light+0x4d/0x71
[133860.370205] [<ffffffff8117c726>] SyS_ioctl+0x57/0x79
[133860.370205] [<ffffffff8147cd97>] entry_SYSCALL_64_fastpath+0x12/0x6f
This bug happened because we assumed that by setting keep_locks to 1 in
our search path, our path after a call to btrfs_search_slot() would have
all nodes locked, which is not always true because unlock_up() (called by
btrfs_search_slot()) will unlock a node in a path if the slot of the node
below it doesn't point to the last item or beyond the last item. For
example, when the tree has a heigth of 2 and path->slots[0] has a value
smaller than btrfs_header_nritems(path->nodes[0]) - 1, the node at level 2
will be unlocked (also because lowest_unlock is set to 1 due to the fact
that the value passed as ins_len to btrfs_search_slot is 0).
This resulted in btrfs_find_next_key(), called before btrfs_realloc_node(),
to release out path and call again btrfs_search_slot(), but this time with
the cow parameter set to 0, meaning the resulting path got only read locks.
Therefore when we called btrfs_realloc_node(), with path->nodes[1] having
a read lock, it resulted in the warning and BUG_ON when calling
btrfs_set_lock_blocking() against the node, as that function expects the
node to have a write lock.
The second bug happened often when the first bug didn't happen, and made
us hang and hitting the following warning at fs/btrfs/locking.c:
251 void btrfs_tree_lock(struct extent_buffer *eb)
252 {
253 WARN_ON(eb->lock_owner == current->pid);
This happened because the tree search we made at btrfs_defrag_leaves()
before calling btrfs_find_next_key() locked a leaf and all the other
nodes in the path, so btrfs_find_next_key() had no need to release the
path and make a new search (with path->lowest_level set to 1). This
made btrfs_realloc_node() attempt to write lock the same leaf again,
resulting in a hang/deadlock.
So fix these issues by calling btrfs_find_next_key() after calling
btrfs_realloc_node() and setting the search path's lowest_level to 1
to avoid the hang/deadlock when attempting to write lock the leaves
at btrfs_realloc_node().
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Now we can finally hook up everything so we can actually use free space
tree. The free space tree is enabled by passing the space_cache=v2 mount
option. On the first mount with the this option set, the free space tree
will be created and the FREE_SPACE_TREE read-only compat bit will be
set. Any time the filesystem is mounted from then on, we must use the
free space tree. The clear_cache option will also clear the free space
tree.
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
The free space tree is updated in tandem with the extent tree. There are
only a handful of places where we need to hook in:
1. Block group creation
2. Block group deletion
3. Delayed refs (extent creation and deletion)
4. Block group caching
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
This tests the operations on the free space tree trying to excercise all
of the main cases for both formats. Between this and xfstests, the free
space tree should have pretty good coverage.
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
The free space cache has turned out to be a scalability bottleneck on
large, busy filesystems. When the cache for a lot of block groups needs
to be written out, we can get extremely long commit times; if this
happens in the critical section, things are especially bad because we
block new transactions from happening.
The main problem with the free space cache is that it has to be written
out in its entirety and is managed in an ad hoc fashion. Using a B-tree
to store free space fixes this: updates can be done as needed and we get
all of the benefits of using a B-tree: checksumming, RAID handling,
well-understood behavior.
With the free space tree, we get commit times that are about the same as
the no cache case with load times slower than the free space cache case
but still much faster than the no cache case. Free space is represented
with extents until it becomes more space-efficient to use bitmaps,
giving us similar space overhead to the free space cache.
The operations on the free space tree are: adding and removing free
space, handling the creation and deletion of block groups, and loading
the free space for a block group. We can also create the free space tree
by walking the extent tree and clear the free space tree.
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
The on-disk format for the free space tree is straightforward. Each
block group is represented in the free space tree by a free space info
item that stores accounting information: whether the free space for this
block group is stored as bitmaps or extents and how many extents of free
space exist for this block group (regardless of which format is being
used in the tree). Extents are (start, FREE_SPACE_EXTENT, length) keys
with no corresponding item, and bitmaps instead have the
FREE_SPACE_BITMAP type and have a bitmap item attached, which is just an
array of bytes.
Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
We're also going to load the free space tree from caching_thread(), so
we should refactor some of the common code.
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
We're finally going to add one of these for the free space tree, so
let's add the same nice helpers that we have for the incompat bits.
While we're add it, also add helpers to clear the bits.
Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
Sanity test the extent buffer bitmap operations (test, set, and clear)
against the equivalent standard kernel operations.
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
When doing a direct IO write, __blockdev_direct_IO() can call the
btrfs_get_blocks_direct() callback one or more times before it calls the
btrfs_submit_direct() callback. However it can fail after calling the
first callback and before calling the second callback, which is a problem
because the first one creates ordered extents and the second one is the
one that submits bios that cover the ordered extents created by the first
one. That means the ordered extents will never complete nor have any of
the flags BTRFS_ORDERED_IO_DONE / BTRFS_ORDERED_IOERR set, resulting in
subsequent operations (such as other direct IO writes, buffered writes or
hole punching) that lock the same IO range and lookup for ordered extents
in the range to hang forever waiting for those ordered extents because
they can not complete ever, since no bio was submitted.
Fix this by tracking a range of created ordered extents that don't have
yet corresponding bios submitted and completing the ordered extents in
the range if __blockdev_direct_IO() fails with an error.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
If readpages() (triggered by defrag or buffered reads) is called while a
direct IO write is in progress, we have a small time window where we can
deadlock, resulting in traces like the following being generated:
[84723.212993] INFO: task fio:2849 blocked for more than 120 seconds.
[84723.214310] Tainted: G W 4.3.0-rc5-btrfs-next-17+ #1
[84723.215640] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[84723.217313] fio D ffff88023ec75218 0 2849 2835 0x00000000
[84723.218778] ffff880122dfb6e8 0000000000000092 0000000000000000 ffff88023ec75200
[84723.220458] ffff88000e05d2c0 ffff880122dfc000 ffff88023ec75200 7fffffffffffffff
[84723.230597] 0000000000000002 ffffffff8147891a ffff880122dfb700 ffffffff8147856a
[84723.232085] Call Trace:
[84723.232625] [<ffffffff8147891a>] ? bit_wait+0x3c/0x3c
[84723.233529] [<ffffffff8147856a>] schedule+0x7d/0x95
[84723.234398] [<ffffffff8147baa3>] schedule_timeout+0x43/0x10b
[84723.235384] [<ffffffff810f82eb>] ? time_hardirqs_on+0x15/0x28
[84723.236426] [<ffffffff8108a23d>] ? trace_hardirqs_on+0xd/0xf
[84723.237502] [<ffffffff810af8a3>] ? read_seqcount_begin.constprop.20+0x57/0x6d
[84723.238807] [<ffffffff8108a09b>] ? trace_hardirqs_on_caller+0x16/0x1ab
[84723.242012] [<ffffffff8108a23d>] ? trace_hardirqs_on+0xd/0xf
[84723.243064] [<ffffffff810af2ad>] ? timekeeping_get_ns+0xe/0x33
[84723.244116] [<ffffffff810afa2e>] ? ktime_get+0x41/0x52
[84723.245029] [<ffffffff81477cff>] io_schedule_timeout+0xb7/0x12b
[84723.245942] [<ffffffff81477cff>] ? io_schedule_timeout+0xb7/0x12b
[84723.246596] [<ffffffff81478953>] bit_wait_io+0x39/0x45
[84723.247503] [<ffffffff81478b93>] __wait_on_bit_lock+0x49/0x8d
[84723.248540] [<ffffffff8111684f>] __lock_page+0x66/0x68
[84723.249558] [<ffffffff81081c9b>] ? autoremove_wake_function+0x3a/0x3a
[84723.250844] [<ffffffff81124a04>] lock_page+0x2c/0x2f
[84723.251871] [<ffffffff81124afc>] invalidate_inode_pages2_range+0xf5/0x2aa
[84723.253274] [<ffffffff81117c34>] ? filemap_fdatawait_range+0x12d/0x146
[84723.254757] [<ffffffff81118191>] ? filemap_fdatawrite_range+0x13/0x15
[84723.256378] [<ffffffffa05139a2>] btrfs_get_blocks_direct+0x1b0/0x664 [btrfs]
[84723.258556] [<ffffffff8119e3f9>] ? submit_page_section+0x7b/0x111
[84723.260064] [<ffffffff8119eb90>] do_blockdev_direct_IO+0x658/0xbdb
[84723.261479] [<ffffffffa05137f2>] ? btrfs_page_exists_in_range+0x1a9/0x1a9 [btrfs]
[84723.262961] [<ffffffffa050a8a6>] ? btrfs_writepage_start_hook+0xce/0xce [btrfs]
[84723.264449] [<ffffffff8119f144>] __blockdev_direct_IO+0x31/0x33
[84723.265614] [<ffffffff8119f144>] ? __blockdev_direct_IO+0x31/0x33
[84723.266769] [<ffffffffa050a8a6>] ? btrfs_writepage_start_hook+0xce/0xce [btrfs]
[84723.268264] [<ffffffffa050935d>] btrfs_direct_IO+0x1b9/0x259 [btrfs]
[84723.270954] [<ffffffffa050a8a6>] ? btrfs_writepage_start_hook+0xce/0xce [btrfs]
[84723.272465] [<ffffffff8111878c>] generic_file_direct_write+0xb3/0x128
[84723.273734] [<ffffffffa051955c>] btrfs_file_write_iter+0x228/0x404 [btrfs]
[84723.275101] [<ffffffff8116ca6f>] __vfs_write+0x7c/0xa5
[84723.276200] [<ffffffff8116cfab>] vfs_write+0xa0/0xe4
[84723.277298] [<ffffffff8116d79d>] SyS_write+0x50/0x7e
[84723.278327] [<ffffffff8147cd97>] entry_SYSCALL_64_fastpath+0x12/0x6f
[84723.279595] INFO: lockdep is turned off.
[84723.379035] INFO: task btrfs:2923 blocked for more than 120 seconds.
[84723.380323] Tainted: G W 4.3.0-rc5-btrfs-next-17+ #1
[84723.381608] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[84723.383003] btrfs D ffff88023ed75218 0 2923 2859 0x00000000
[84723.384277] ffff88001311f860 0000000000000082 ffff88001311f840 ffff88023ed75200
[84723.385748] ffff88012c6751c0 ffff880013120000 ffff88012042fe68 ffff88012042fe30
[84723.387152] ffff880221571c88 0000000000000001 ffff88001311f878 ffffffff8147856a
[84723.388620] Call Trace:
[84723.389105] [<ffffffff8147856a>] schedule+0x7d/0x95
[84723.391882] [<ffffffffa051da32>] btrfs_start_ordered_extent+0x161/0x1fa [btrfs]
[84723.393718] [<ffffffff81081c61>] ? signal_pending_state+0x31/0x31
[84723.395659] [<ffffffffa0522c5b>] __do_contiguous_readpages.constprop.21+0x81/0xdc [btrfs]
[84723.397383] [<ffffffffa050ac96>] ? btrfs_submit_direct+0x3f0/0x3f0 [btrfs]
[84723.398852] [<ffffffffa0522da3>] __extent_readpages.constprop.20+0xed/0x100 [btrfs]
[84723.400561] [<ffffffff81123f6c>] ? __lru_cache_add+0x5d/0x72
[84723.401787] [<ffffffffa0523896>] extent_readpages+0x111/0x1a7 [btrfs]
[84723.403121] [<ffffffffa050ac96>] ? btrfs_submit_direct+0x3f0/0x3f0 [btrfs]
[84723.404583] [<ffffffffa05088fa>] btrfs_readpages+0x1f/0x21 [btrfs]
[84723.406007] [<ffffffff811226df>] __do_page_cache_readahead+0x168/0x1f4
[84723.407502] [<ffffffff81122988>] ondemand_readahead+0x21d/0x22e
[84723.408937] [<ffffffff81122988>] ? ondemand_readahead+0x21d/0x22e
[84723.410487] [<ffffffff81122af1>] page_cache_sync_readahead+0x3d/0x3f
[84723.411710] [<ffffffffa0535388>] btrfs_defrag_file+0x419/0xaaf [btrfs]
[84723.413007] [<ffffffffa0531db0>] ? kzalloc+0xf/0x11 [btrfs]
[84723.414085] [<ffffffffa0535b43>] btrfs_ioctl_defrag+0x125/0x14e [btrfs]
[84723.415307] [<ffffffffa0536753>] btrfs_ioctl+0x746/0x24c6 [btrfs]
[84723.416532] [<ffffffff81087481>] ? arch_local_irq_save+0x9/0xc
[84723.417731] [<ffffffff8113ad61>] ? __might_fault+0x4c/0xa7
[84723.418699] [<ffffffff8113ad61>] ? __might_fault+0x4c/0xa7
[84723.421532] [<ffffffff8113adba>] ? __might_fault+0xa5/0xa7
[84723.422629] [<ffffffff81171139>] ? cp_new_stat+0x15d/0x174
[84723.423712] [<ffffffff8117c610>] do_vfs_ioctl+0x427/0x4e6
[84723.424801] [<ffffffff81171175>] ? SYSC_newfstat+0x25/0x2e
[84723.425968] [<ffffffff8118574d>] ? __fget_light+0x4d/0x71
[84723.427063] [<ffffffff8117c726>] SyS_ioctl+0x57/0x79
[84723.428138] [<ffffffff8147cd97>] entry_SYSCALL_64_fastpath+0x12/0x6f
Consider the following logical and physical file layout:
logical: ... [ prealloc extent A ] [ prealloc extent B ] [ extent C ] ...
4K 8K 16K
physical: ... 12853248 12857344 1103101952 ...
(= 12853248 + 4K)
Extents A and B are physically adjacent. The following diagram shows a
sequence of events that lead to the deadlock when we attempt to do a
direct IO write against the file range [4K, 16K[ and a defrag is triggered
simultaneously.
CPU 1 CPU 2
btrfs_direct_IO()
btrfs_get_blocks_direct()
creates ordered extent A, covering
the 4k prealloc extent A (range [4K, 8K[)
btrfs_defrag_file()
page_cache_sync_readahead([0K, 1M[)
btrfs_readpages()
extent_readpages()
locks all pages in the file
range [0K, 128K[ through calls
to add_to_page_cache_lru()
__do_contiguous_readpages()
finds ordered extent A
waits for it to complete
btrfs_get_blocks_direct() called again
lock_extent_direct(range [8K, 16K[)
finds a page in range [8K, 16K[ through
btrfs_page_exists_in_range()
invalidate_inode_pages2_range([8K, 16K[)
--> tries to lock pages that are already
locked by the task at CPU 2
--> our task, running __blockdev_direct_IO(),
hangs waiting to lock the pages and the
submit bio callback, btrfs_submit_direct(),
ends up never being called, resulting in the
ordered extent A never completing (because a
corresponding bio is never submitted) and
CPU 2 will wait for it forever while holding
the pages locked
---> deadlock!
Fix this by removing the page invalidation approach when attempting to
lock the range for IO from the callback btrfs_get_blocks_direct() and
falling back buffered IO. This was a rare case anyway and well behaved
applications do not mix concurrent direct IO writes with buffered reads
anyway, being a concurrent defrag the only normal case that could lead
to the deadlock.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Commit 61de718fce ("Btrfs: fix memory corruption on failure to submit
bio for direct IO") fixed problems with the error handling code after we
fail to submit a bio for direct IO. However there were 2 problems that it
did not address when the failure is due to memory allocation failures for
direct IO writes:
1) We considered that there could be only one ordered extent for the whole
IO range, which is not always true, as we can have multiple;
2) It did not set the bit BTRFS_ORDERED_IO_DONE in the ordered extent,
which can make other tasks running btrfs_wait_logged_extents() hang
forever, since they wait for that bit to be set. The general assumption
is that regardless of an error, the BTRFS_ORDERED_IO_DONE is always set
and it precedes setting the bit BTRFS_ORDERED_COMPLETE.
Fix these issues by moving part of the btrfs_endio_direct_write() handler
into a new helper function and having that new helper function called when
we fail to allocate memory to submit the bio (and its private object) for
a direct IO write.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
When a transaction is aborted, or its commit fails before writing the new
superblock and calling btrfs_finish_extent_commit(), we leak reference
counts on the block groups attached to the transaction's delete_bgs list,
because btrfs_finish_extent_commit() is never called for those two cases.
Fix this by dropping their references at btrfs_put_transaction(), which
is called when transactions are aborted (by making the transaction kthread
commit the transaction) or if their commits fail.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
During the final phase of a device replace operation, I ran into a
transaction abort that resulted in the following trace:
[23919.655368] WARNING: CPU: 10 PID: 30175 at fs/btrfs/extent-tree.c:9843 btrfs_create_pending_block_groups+0x15e/0x1ab [btrfs]()
[23919.664742] BTRFS: Transaction aborted (error -2)
[23919.665749] Modules linked in: btrfs crc32c_generic xor raid6_pq nfsd auth_rpcgss oid_registry nfs_acl nfs lockd grace fscache sunrpc loop fuse parport_pc i2c_piix4 parport psmouse acpi_cpufreq processor i2c_core evdev microcode pcspkr button serio_raw ext4 crc16 jbd2 mbcache sd_mod sg sr_mod cdrom virtio_scsi ata_generic ata_piix virtio_pci floppy virtio_ring libata e1000 virtio scsi_mod [last unloaded: btrfs]
[23919.679442] CPU: 10 PID: 30175 Comm: fsstress Not tainted 4.3.0-rc5-btrfs-next-17+ #1
[23919.682392] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.8.1-0-g4adadbd-20150316_085822-nilsson.home.kraxel.org 04/01/2014
[23919.689151] 0000000000000000 ffff8804020cbb50 ffffffff812566f4 ffff8804020cbb98
[23919.692604] ffff8804020cbb88 ffffffff8104d0a6 ffffffffa03eea69 ffff88041b678a48
[23919.694230] ffff88042ac38000 ffff88041b678930 00000000fffffffe ffff8804020cbbf0
[23919.696716] Call Trace:
[23919.698669] [<ffffffff812566f4>] dump_stack+0x4e/0x79
[23919.700597] [<ffffffff8104d0a6>] warn_slowpath_common+0x9f/0xb8
[23919.701958] [<ffffffffa03eea69>] ? btrfs_create_pending_block_groups+0x15e/0x1ab [btrfs]
[23919.703612] [<ffffffff8104d107>] warn_slowpath_fmt+0x48/0x50
[23919.705047] [<ffffffffa03eea69>] btrfs_create_pending_block_groups+0x15e/0x1ab [btrfs]
[23919.706967] [<ffffffffa0402097>] __btrfs_end_transaction+0x84/0x2dd [btrfs]
[23919.708611] [<ffffffffa0402300>] btrfs_end_transaction+0x10/0x12 [btrfs]
[23919.710099] [<ffffffffa03ef0b8>] btrfs_alloc_data_chunk_ondemand+0x121/0x28b [btrfs]
[23919.711970] [<ffffffffa0413025>] btrfs_fallocate+0x7d3/0xc6d [btrfs]
[23919.713602] [<ffffffff8108b78f>] ? lock_acquire+0x10d/0x194
[23919.714756] [<ffffffff81086dbc>] ? percpu_down_read+0x51/0x78
[23919.716155] [<ffffffff8116ef1d>] ? __sb_start_write+0x5f/0xb0
[23919.718918] [<ffffffff8116ef1d>] ? __sb_start_write+0x5f/0xb0
[23919.724170] [<ffffffff8116b579>] vfs_fallocate+0x170/0x1ff
[23919.725482] [<ffffffff8117c1d7>] ioctl_preallocate+0x89/0x9b
[23919.726790] [<ffffffff8117c5ef>] do_vfs_ioctl+0x406/0x4e6
[23919.728428] [<ffffffff81171175>] ? SYSC_newfstat+0x25/0x2e
[23919.729642] [<ffffffff8118574d>] ? __fget_light+0x4d/0x71
[23919.730782] [<ffffffff8117c726>] SyS_ioctl+0x57/0x79
[23919.731847] [<ffffffff8147cd97>] entry_SYSCALL_64_fastpath+0x12/0x6f
[23919.733330] ---[ end trace 166ef301a335832a ]---
This is due to a race between device replace and chunk allocation, which
the following diagram illustrates:
CPU 1 CPU 2
btrfs_dev_replace_finishing()
at this point
dev_replace->tgtdev->devid ==
BTRFS_DEV_REPLACE_DEVID (0ULL)
...
btrfs_start_transaction()
btrfs_commit_transaction()
btrfs_fallocate()
btrfs_alloc_data_chunk_ondemand()
btrfs_join_transaction()
--> starts a new transaction
do_chunk_alloc()
lock fs_info->chunk_mutex
btrfs_alloc_chunk()
--> creates extent map for
the new chunk with
em->bdev->map->stripes[i]->dev->devid
== X (X > 0)
--> extent map is added to
fs_info->mapping_tree
--> initial phase of bg A
allocation completes
unlock fs_info->chunk_mutex
lock fs_info->chunk_mutex
btrfs_dev_replace_update_device_in_mapping_tree()
--> iterates fs_info->mapping_tree and
replaces the device in every extent
map's map->stripes[] with
dev_replace->tgtdev, which still has
an id of 0ULL (BTRFS_DEV_REPLACE_DEVID)
btrfs_end_transaction()
btrfs_create_pending_block_groups()
--> starts final phase of
bg A creation (update device,
extent, and chunk trees, etc)
btrfs_finish_chunk_alloc()
btrfs_update_device()
--> attempts to update a device
item with ID == 0ULL
(BTRFS_DEV_REPLACE_DEVID)
which is the current ID of
bg A's
em->bdev->map->stripes[i]->dev->devid
--> doesn't find such item
returns -ENOENT
--> the device id should have been X
and not 0ULL
got -ENOENT from
btrfs_finish_chunk_alloc()
and aborts current transaction
finishes setting up the target device,
namely it sets tgtdev->devid to the value
of srcdev->devid, which is X (and X > 0)
frees the srcdev
unlock fs_info->chunk_mutex
So fix this by taking the device list mutex when processing the chunk's
extent map stripes to update the device items. This avoids getting the
wrong device id and use-after-free problems if the task finishing a
chunk allocation grabs the replaced device, which is freed while the
dev replace task is holding the device list mutex.
This happened while running fstest btrfs/071.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
prepare_pages() may end up calling prepare_uptodate_page() twice if our
write only spans a single page. But if the first call returns an error,
our page will be unlocked and its not safe to call it again.
This bug goes all the way back to 2011, and it's not something commonly
hit.
While we're here, add a more explicit check for the page being truncated
away. The bare lock_page() alone is protected only by good thoughts and
i_mutex, which we're sure to regret eventually.
Reported-by: Dave Jones <dsj@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
Dave Jones found a warning from kasan in setup_cluster_bitmaps()
==================================================================
BUG: KASAN: stack-out-of-bounds in setup_cluster_bitmap+0xc4/0x5a0 at
addr ffff88039bef6828
Read of size 8 by task nfsd/1009
page:ffffea000e6fbd80 count:0 mapcount:0 mapping: (null)
index:0x0
flags: 0x8000000000000000()
page dumped because: kasan: bad access detected
CPU: 1 PID: 1009 Comm: nfsd Tainted: G W
4.4.0-rc3-backup-debug+ #1
ffff880065647b50 000000006bb712c2 ffff88039bef6640 ffffffffa680a43e
0000004559c00000 ffff88039bef66c8 ffffffffa62638d1 ffffffffa61121c0
ffff8803a5769de8 0000000000000296 ffff8803a5769df0 0000000000046280
Call Trace:
[<ffffffffa680a43e>] dump_stack+0x4b/0x6d
[<ffffffffa62638d1>] kasan_report_error+0x501/0x520
[<ffffffffa61121c0>] ? debug_show_all_locks+0x1e0/0x1e0
[<ffffffffa6263948>] kasan_report+0x58/0x60
[<ffffffffa6814b00>] ? rb_last+0x10/0x40
[<ffffffffa66f8af4>] ? setup_cluster_bitmap+0xc4/0x5a0
[<ffffffffa6262ead>] __asan_load8+0x5d/0x70
[<ffffffffa66f8af4>] setup_cluster_bitmap+0xc4/0x5a0
[<ffffffffa66f675a>] ? setup_cluster_no_bitmap+0x6a/0x400
[<ffffffffa66fcd16>] btrfs_find_space_cluster+0x4b6/0x640
[<ffffffffa66fc860>] ? btrfs_alloc_from_cluster+0x4e0/0x4e0
[<ffffffffa66fc36e>] ? btrfs_return_cluster_to_free_space+0x9e/0xb0
[<ffffffffa702dc37>] ? _raw_spin_unlock+0x27/0x40
[<ffffffffa666a1a1>] find_free_extent+0xba1/0x1520
Andrey noticed this was because we were doing list_first_entry on a list
that might be empty. Rework the tests a bit so we don't do that.
Signed-off-by: Chris Mason <clm@fb.com>
Reprorted-by: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Reported-by: Dave Jones <dsj@fb.com>
When an inconsistent space cache is detected during loading we log a
warning that users frequently mistake as instruction to invalidate the
cache manually, even though this is not required. Fix the message to
indicate that the cache will be rebuilt automatically.
Signed-off-by: Holger Hoffstätte <holger.hoffstaette@googlemail.com>
Acked-by: Filipe Manana <fdmanana@suse.com>
If we fail to allocate a new data chunk, we were jumping to the error path
without release the transaction handle we got before. Fix this by always
releasing it before doing the jump.
Fixes: 2c9fe83552 ("btrfs: Fix lost-data-profile caused by balance bg")
Signed-off-by: Filipe Manana <fdmanana@suse.com>
As of my previous change titled "Btrfs: fix scrub preventing unused block
groups from being deleted", the following warning at
extent-tree.c:btrfs_delete_unused_bgs() can be hit when we mount the a
filesysten with "-o discard":
10263 void btrfs_delete_unused_bgs(struct btrfs_fs_info *fs_info)
10264 {
(...)
10405 if (trimming) {
10406 WARN_ON(!list_empty(&block_group->bg_list));
10407 spin_lock(&trans->transaction->deleted_bgs_lock);
10408 list_move(&block_group->bg_list,
10409 &trans->transaction->deleted_bgs);
10410 spin_unlock(&trans->transaction->deleted_bgs_lock);
10411 btrfs_get_block_group(block_group);
10412 }
(...)
This happens because scrub can now add back the block group to the list of
unused block groups (fs_info->unused_bgs). This is dangerous because we
are moving the block group from the unused block groups list to the list
of deleted block groups without holding the lock that protects the source
list (fs_info->unused_bgs_lock).
The following diagram illustrates how this happens:
CPU 1 CPU 2
cleaner_kthread()
btrfs_delete_unused_bgs()
sees bg X in list
fs_info->unused_bgs
deletes bg X from list
fs_info->unused_bgs
scrub_enumerate_chunks()
searches device tree using
its commit root
finds device extent for
block group X
gets block group X from the tree
fs_info->block_group_cache_tree
(via btrfs_lookup_block_group())
sets bg X to RO (again)
scrub_chunk(bg X)
sets bg X back to RW mode
adds bg X to the list
fs_info->unused_bgs again,
since it's still unused and
currently not in that list
sets bg X to RO mode
btrfs_remove_chunk(bg X)
--> discard is enabled and bg X
is in the fs_info->unused_bgs
list again so the warning is
triggered
--> we move it from that list into
the transaction's delete_bgs
list, but we can have another
task currently manipulating
the first list (fs_info->unused_bgs)
Fix this by using the same lock (fs_info->unused_bgs_lock) to protect both
the list of unused block groups and the list of deleted block groups. This
makes it safe and there's not much worry for more lock contention, as this
lock is seldom used and only the cleaner kthread adds elements to the list
of deleted block groups. The warning goes away too, as this was previously
an impossible case (and would have been better a BUG_ON/ASSERT) but it's
not impossible anymore.
Reproduced with fstest btrfs/073 (using MOUNT_OPTIONS="-o discard").
Signed-off-by: Filipe Manana <fdmanana@suse.com>
new method: ->get_link(); replacement of ->follow_link(). The differences
are:
* inode and dentry are passed separately
* might be called both in RCU and non-RCU mode;
the former is indicated by passing it a NULL dentry.
* when called that way it isn't allowed to block
and should return ERR_PTR(-ECHILD) if it needs to be called
in non-RCU mode.
It's a flagday change - the old method is gone, all in-tree instances
converted. Conversion isn't hard; said that, so far very few instances
do not immediately bail out when called in RCU mode. That'll change
in the next commits.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
kmap() in page_follow_link_light() needed to go - allowing to hold
an arbitrary number of kmaps for long is a great way to deadlocking
the system.
new helper (inode_nohighmem(inode)) needs to be used for pagecache
symlinks inodes; done for all in-tree cases. page_follow_link_light()
instrumented to yell about anything missed.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
The btrfs clone ioctls are now adopted by other file systems, with NFS
and CIFS already having support for them, and XFS being under active
development. To avoid growth of various slightly incompatible
implementations, add one to the VFS. Note that clones are different from
file copies in several ways:
- they are atomic vs other writers
- they support whole file clones
- they support 64-bit legth clones
- they do not allow partial success (aka short writes)
- clones are expected to be a fast metadata operation
Because of that it would be rather cumbersome to try to piggyback them on
top of the recent clone_file_range infrastructure. The converse isn't
true and the clone_file_range system call could try clone file range as
a first attempt to copy, something that further patches will enable.
Based on earlier work from Peng Tao.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Does not return any errors, nor anything from the callgraph. There's a
BUG_ON but it's a sanity check and not an error condition we could
recover from.
Signed-off-by: David Sterba <dsterba@suse.com>
Does not return any errors, nor anything from the callgraph. There's a
BUG_ON but it's a sanity check and not an error condition we could
recover from.
Signed-off-by: David Sterba <dsterba@suse.com>
Does not return any errors, nor anything from the callgraph. There's a
BUG_ON but it's a sanity check and not an error condition we could
recover from.
Signed-off-by: David Sterba <dsterba@suse.com>
Does not return any errors, nor anything from the callgraph. The branch
in end_bio_extent_writepage has been skipped since
5fd0204355 ("Btrfs: finish ordered extents in their own thread").
Signed-off-by: David Sterba <dsterba@suse.com>
Use the VFS xattr handler infrastructure and get rid of similar code in
the filesystem.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Remove POSIX_ACL_XATTR_{ACCESS,DEFAULT} and GFS2_POSIX_ACL_{ACCESS,DEFAULT}
and replace them with the definitions in <include/uapi/linux/xattr.h>.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Reviewed-by: James Morris <james.l.morris@oracle.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
We don't have to use GFP_NOFS in context of ACL or XATTR actions, not
possible to loop through the allocator and it's safe to fail with
ENOMEM.
Signed-off-by: David Sterba <dsterba@suse.com>
We don't have to use GFP_NOFS to allocate workqueue structures, this is
done from mount context or potentially scrub start context, safe to fail
in both cases.
Signed-off-by: David Sterba <dsterba@suse.com>
We don't have to use GFP_NOFS in the ioctl handlers because there's no
risk of looping through the allocators back to the filesystem. This
patch covers only allocations that are directly in the ioctl handlers.
Signed-off-by: David Sterba <dsterba@suse.com>
There's only one caller and single value, we can propagate it down to
the callee and remove the unused parameter.
Signed-off-by: David Sterba <dsterba@suse.com>
The funcions just wrap the clear_extent_bit API and generate function
calls. This increases stack consumption and may negatively affect
performance due to icache misses. We can simply make the helpers static
inline and keep the type checking and API untouched. The code slightly
decreases:
text data bss dec hex filename
938667 43670 23144 1005481 f57a9 fs/btrfs/btrfs.ko.before
939651 43670 23144 1006465 f5b81 fs/btrfs/btrfs.ko.after
Signed-off-by: David Sterba <dsterba@suse.com>
The funcions just wrap the set_extent_bit API and generate function
calls. This increases stack consumption and may negatively affect
performance due to icache misses. We can simply make the helpers static
inline and keep the type checking and API untouched. The code slightly
increases:
text data bss dec hex filename
938427 43670 23144 1005241 f56b9 fs/btrfs/btrfs.ko.before
938667 43670 23144 1005481 f57a9 fs/btrfs/btrfs.ko
Signed-off-by: David Sterba <dsterba@suse.com>
This rearranges the existing COPY_RANGE ioctl implementation so that the
.copy_file_range file operation can call the core loop that copies file
data extent items.
The extent copying loop is lifted up into its own function. It retains
the core btrfs error checks that should be shared.
Signed-off-by: Zach Brown <zab@redhat.com>
[Anna Schumaker: Make flags an unsigned int,
Check for COPY_FR_REFLINK]
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Pull btrfs fixes from Chris Mason:
"This has Mark Fasheh's patches to fix quota accounting during subvol
deletion, which we've been working on for a while now. The patch is
pretty small but it's a key fix.
Otherwise it's a random assortment"
* 'for-linus-4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
btrfs: fix balance range usage filters in 4.4-rc
btrfs: qgroup: account shared subtree during snapshot delete
Btrfs: use btrfs_get_fs_root in resolve_indirect_ref
btrfs: qgroup: fix quota disable during rescan
Btrfs: fix race between cleaner kthread and space cache writeout
Btrfs: fix scrub preventing unused block groups from being deleted
Btrfs: fix race between scrub and block group deletion
btrfs: fix rcu warning during device replace
btrfs: Continue replace when set_block_ro failed
btrfs: fix clashing number of the enhanced balance usage filter
Btrfs: fix the number of transaction units needed to remove a block group
Btrfs: use global reserve when deleting unused block group after ENOSPC
Btrfs: tests: checking for NULL instead of IS_ERR()
btrfs: fix signed overflows in btrfs_sync_file
There's a regression in 4.4-rc since commit bc3094673f
(btrfs: extend balance filter usage to take minimum and maximum) in that
existing (non-ranged) balance with -dusage=x no longer works; all chunks
are skipped.
After staring at the code for a while and wondering why a non-ranged
balance would even need min and max thresholds (..which then were not
set correctly, leading to the bug) I realized that the only problem
was the fact that the filter functions were named wrong, thanks to
patching copypasta. Simply renaming both functions lets the existing
btrfs-progs call balance with -dusage=x and now the non-ranged filter
function is invoked, properly using only a single chunk limit.
Signed-off-by: Holger Hoffstätte <holger.hoffstaette@googlemail.com>
Fixes: bc3094673f ("btrfs: extend balance filter usage to take minimum and maximum")
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
Commit 0ed4792 ('btrfs: qgroup: Switch to new extent-oriented qgroup
mechanism.') removed our qgroup accounting during
btrfs_drop_snapshot(). Predictably, this results in qgroup numbers
going bad shortly after a snapshot is removed.
Fix this by adding a dirty extent record when we encounter extents during
our shared subtree walk. This effectively restores the functionality we had
with the original shared subtree walking code in 1152651 (btrfs: qgroup:
account shared subtrees during snapshot delete).
The idea with the original patch (and this one) is that shared subtrees can
get skipped during drop_snapshot. The shared subtree walk then allows us a
chance to visit those extents and add them to the qgroup work for later
processing. This ultimately makes the accounting for drop snapshot work.
The new qgroup code nicely handles all the other extents during the tree
walk via the ref dec/inc functions so we don't have to add actions beyond
what we had originally.
Signed-off-by: Mark Fasheh <mfasheh@suse.de>
Signed-off-by: Chris Mason <clm@fb.com>
The backref code will look up the fs_root we're trying to resolve our indirect
refs for, unfortunately we use btrfs_read_fs_root_no_name, which returns -ENOENT
if the ref is 0. This isn't helpful for the qgroup stuff with snapshot delete
as it won't be able to search down the snapshot we are deleting, which will
cause us to miss roots. So use btrfs_get_fs_root and send false for check_ref
so we can always get the root we're looking for. Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.de>
Signed-off-by: Chris Mason <clm@fb.com>
There's a race condition that leads to a NULL pointer dereference if you
disable quotas while a quota rescan is running. To fix this, we just need
to wait for the quota rescan worker to actually exit before tearing down
the quota structures.
Signed-off-by: Justin Maggard <jmaggard@netgear.com>
Signed-off-by: Chris Mason <clm@fb.com>
When a block group becomes unused and the cleaner kthread is currently
running, we can end up getting the current transaction aborted with error
-ENOENT when we try to commit the transaction, leading to the following
trace:
[59779.258768] WARNING: CPU: 3 PID: 5990 at fs/btrfs/extent-tree.c:3740 btrfs_write_dirty_block_groups+0x17c/0x214 [btrfs]()
[59779.272594] BTRFS: Transaction aborted (error -2)
(...)
[59779.291137] Call Trace:
[59779.291621] [<ffffffff812566f4>] dump_stack+0x4e/0x79
[59779.292543] [<ffffffff8104d0a6>] warn_slowpath_common+0x9f/0xb8
[59779.293435] [<ffffffffa04cb81f>] ? btrfs_write_dirty_block_groups+0x17c/0x214 [btrfs]
[59779.295000] [<ffffffff8104d107>] warn_slowpath_fmt+0x48/0x50
[59779.296138] [<ffffffffa04c2721>] ? write_one_cache_group.isra.32+0x77/0x82 [btrfs]
[59779.297663] [<ffffffffa04cb81f>] btrfs_write_dirty_block_groups+0x17c/0x214 [btrfs]
[59779.299141] [<ffffffffa0549b0d>] commit_cowonly_roots+0x1de/0x261 [btrfs]
[59779.300359] [<ffffffffa04dd5b6>] btrfs_commit_transaction+0x4c4/0x99c [btrfs]
[59779.301805] [<ffffffffa04b5df4>] btrfs_sync_fs+0x145/0x1ad [btrfs]
[59779.302893] [<ffffffff81196634>] sync_filesystem+0x7f/0x93
(...)
[59779.318186] ---[ end trace 577e2daff90da33a ]---
The following diagram illustrates a sequence of steps leading to this
problem:
CPU 1 CPU 2
<at transaction N>
adds bg A to list
fs_info->unused_bgs
adds bg B to list
fs_info->unused_bgs
<transaction kthread
commits transaction N
and wakes up the
cleaner kthread>
cleaner kthread
delete_unused_bgs()
sees bg A in list
fs_info->unused_bgs
btrfs_start_transaction()
<transaction N + 1 starts>
deletes bg A
update_block_group(bg C)
--> adds bg C to list
fs_info->unused_bgs
deletes bg B
sees bg C in the list
fs_info->unused_bgs
btrfs_remove_chunk(bg C)
btrfs_remove_block_group(bg C)
--> checks if the block group
is in a dirty list, and
because it isn't now, it
does nothing
--> the block group item
is deleted from the
extent tree
--> adds bg C to list
transaction->dirty_bgs
some task calls
btrfs_commit_transaction(t N + 1)
commit_cowonly_roots()
btrfs_write_dirty_block_groups()
--> sees bg C in cur_trans->dirty_bgs
--> calls write_one_cache_group()
which returns -ENOENT because
it did not find the block group
item in the extent tree
--> transaction aborte with -ENOENT
because write_one_cache_group()
returned that error
So fix this by adding a block group to the list of dirty block groups
before adding it to the list of unused block groups.
This happened on a stress test using fsstress plus concurrent calls to
fallocate 20G and truncate (releasing part of the space allocated with
fallocate).
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
Currently scrub can race with the cleaner kthread when the later attempts
to delete an unused block group, and the result is preventing the cleaner
kthread from ever deleting later the block group - unless the block group
becomes used and unused again. The following diagram illustrates that
race:
CPU 1 CPU 2
cleaner kthread
btrfs_delete_unused_bgs()
gets block group X from
fs_info->unused_bgs and
removes it from that list
scrub_enumerate_chunks()
searches device tree using
its commit root
finds device extent for
block group X
gets block group X from the tree
fs_info->block_group_cache_tree
(via btrfs_lookup_block_group())
sets bg X to RO
sees the block group is
already RO and therefore
doesn't delete it nor adds
it back to unused list
So fix this by making scrub add the block group again to the list of
unused block groups if the block group is still unused when it finished
scrubbing it and it hasn't been removed already.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
Scrub can race with the cleaner kthread deleting block groups that are
unused (and with relocation too) leading to a failure with error -EINVAL
that gets returned to user space.
The following diagram illustrates how it happens:
CPU 1 CPU 2
cleaner kthread
btrfs_delete_unused_bgs()
gets block group X from
fs_info->unused_bgs
sets block group to RO
btrfs_remove_chunk(bg X)
deletes device extents
scrub_enumerate_chunks()
searches device tree using
its commit root
finds device extent for
block group X
gets block group X from the tree
fs_info->block_group_cache_tree
(via btrfs_lookup_block_group())
sets bg X to RO (again)
btrfs_remove_block_group(bg X)
deletes block group from
fs_info->block_group_cache_tree
removes extent map from
fs_info->mapping_tree
scrub_chunk(offset X)
searches fs_info->mapping_tree
for extent map starting at
offset X
--> doesn't find any such
extent map
--> returns -EINVAL and scrub
errors out to userspace
with -EINVAL
Fix this by dealing with an extent map lookup failure as an indicator of
block group deletion.
Issue reproduced with fstest btrfs/071.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
The test btrfs/011 triggers a rcu warning
Reviewed-by: Anand Jain <anand.jain@oracle.com>
===============================
[ INFO: suspicious RCU usage. ]
4.4.0-rc1-default+ #286 Tainted: G W
-------------------------------
fs/btrfs/volumes.c:1977 suspicious rcu_dereference_check() usage!
other info that might help us debug this:
rcu_scheduler_active = 1, debug_locks = 0
4 locks held by btrfs/28786:
0: (&fs_info->dev_replace.lock_finishing_cancel_unmount){+.+...}, at: [<ffffffffa00bc785>] btrfs_dev_replace_finishing+0x45/0xa00 [btrfs]
1: (uuid_mutex){+.+.+.}, at: [<ffffffffa00bc84f>] btrfs_dev_replace_finishing+0x10f/0xa00 [btrfs]
2: (&fs_devs->device_list_mutex){+.+.+.}, at: [<ffffffffa00bc868>] btrfs_dev_replace_finishing+0x128/0xa00 [btrfs]
3: (&fs_info->chunk_mutex){+.+...}, at: [<ffffffffa00bc87d>] btrfs_dev_replace_finishing+0x13d/0xa00 [btrfs]
stack backtrace:
CPU: 0 PID: 28786 Comm: btrfs Tainted: G W 4.4.0-rc1-default+ #286
Hardware name: Intel Corporation SandyBridge Platform/To be filled by O.E.M., BIOS ASNBCPT1.86C.0031.B00.1006301607 06/30/2010
0000000000000001 ffff8800a07dfb48 ffffffff8141d47b 0000000000000001
0000000000000001 0000000000000000 ffff8801464a4f00 ffff8800a07dfb78
ffffffff810cd883 ffff880146eb9400 ffff8800a3698600 ffff8800a33fe220
Call Trace:
[<ffffffff8141d47b>] dump_stack+0x4f/0x74
[<ffffffff810cd883>] lockdep_rcu_suspicious+0x103/0x140
[<ffffffffa0071261>] btrfs_rm_dev_replace_remove_srcdev+0x111/0x130 [btrfs]
[<ffffffff810d354d>] ? trace_hardirqs_on+0xd/0x10
[<ffffffff81449536>] ? __percpu_counter_sum+0x66/0x80
[<ffffffffa00bcc15>] btrfs_dev_replace_finishing+0x4d5/0xa00 [btrfs]
[<ffffffffa00bc96e>] ? btrfs_dev_replace_finishing+0x22e/0xa00 [btrfs]
[<ffffffffa00a8795>] ? btrfs_scrub_dev+0x415/0x6d0 [btrfs]
[<ffffffffa003ea69>] ? btrfs_start_transaction+0x9/0x20 [btrfs]
[<ffffffffa00bda79>] btrfs_dev_replace_start+0x339/0x590 [btrfs]
[<ffffffff81196aa5>] ? __might_fault+0x95/0xa0
[<ffffffffa0078638>] btrfs_ioctl_dev_replace+0x118/0x160 [btrfs]
[<ffffffff811409c6>] ? stack_trace_call+0x46/0x70
[<ffffffffa007c914>] ? btrfs_ioctl+0x24/0x1770 [btrfs]
[<ffffffffa007ce43>] btrfs_ioctl+0x553/0x1770 [btrfs]
[<ffffffff811409c6>] ? stack_trace_call+0x46/0x70
[<ffffffff811d6eb1>] ? do_vfs_ioctl+0x21/0x5a0
[<ffffffff811d6f1c>] do_vfs_ioctl+0x8c/0x5a0
[<ffffffff811e3336>] ? __fget_light+0x86/0xb0
[<ffffffff811e3369>] ? __fdget+0x9/0x20
[<ffffffff811d7451>] ? SyS_ioctl+0x21/0x80
[<ffffffff811d7483>] SyS_ioctl+0x53/0x80
[<ffffffff81b1efd7>] entry_SYSCALL_64_fastpath+0x12/0x6f
This is because of unprotected use of rcu_dereference in
btrfs_scratch_superblocks. We can't add rcu locks around the whole
function because we read the superblock.
The fix will use the rcu string buffer directly without the rcu locking.
Thi is safe as the device will not go away in the meantime. We're
holding the device list mutexes.
Restructuring the code to narrow down the rcu section turned out to be
impossible, we need to call filp_open (through update_dev_time) on the
buffer and this could call kmalloc/__might_sleep. We could call kstrdup
with GFP_ATOMIC but it's not absolutely necessary.
Fixes: 12b1c2637b (Btrfs: enhance btrfs_scratch_superblock to scratch all superblocks)
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
xfstests/011 failed in node with small_size filesystem.
Can be reproduced by following script:
DEV_LIST="/dev/vdd /dev/vde"
DEV_REPLACE="/dev/vdf"
do_test()
{
local mkfs_opt="$1"
local size="$2"
dmesg -c >/dev/null
umount $SCRATCH_MNT &>/dev/null
echo mkfs.btrfs -f $mkfs_opt "${DEV_LIST[*]}"
mkfs.btrfs -f $mkfs_opt "${DEV_LIST[@]}" || return 1
mount "${DEV_LIST[0]}" $SCRATCH_MNT
echo -n "Writing big files"
dd if=/dev/urandom of=$SCRATCH_MNT/t0 bs=1M count=1 >/dev/null 2>&1
for ((i = 1; i <= size; i++)); do
echo -n .
/bin/cp $SCRATCH_MNT/t0 $SCRATCH_MNT/t$i || return 1
done
echo
echo Start replace
btrfs replace start -Bf "${DEV_LIST[0]}" "$DEV_REPLACE" $SCRATCH_MNT || {
dmesg
return 1
}
return 0
}
# Set size to value near fs size
# for example, 1897 can trigger this bug in 2.6G device.
#
./do_test "-d raid1 -m raid1" 1897
System will report replace fail with following warning in dmesg:
[ 134.710853] BTRFS: dev_replace from /dev/vdd (devid 1) to /dev/vdf started
[ 135.542390] BTRFS: btrfs_scrub_dev(/dev/vdd, 1, /dev/vdf) failed -28
[ 135.543505] ------------[ cut here ]------------
[ 135.544127] WARNING: CPU: 0 PID: 4080 at fs/btrfs/dev-replace.c:428 btrfs_dev_replace_start+0x398/0x440()
[ 135.545276] Modules linked in:
[ 135.545681] CPU: 0 PID: 4080 Comm: btrfs Not tainted 4.3.0 #256
[ 135.546439] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.8.2-0-g33fbe13 by qemu-project.org 04/01/2014
[ 135.547798] ffffffff81c5bfcf ffff88003cbb3d28 ffffffff817fe7b5 0000000000000000
[ 135.548774] ffff88003cbb3d60 ffffffff810a88f1 ffff88002b030000 00000000ffffffe4
[ 135.549774] ffff88003c080000 ffff88003c082588 ffff88003c28ab60 ffff88003cbb3d70
[ 135.550758] Call Trace:
[ 135.551086] [<ffffffff817fe7b5>] dump_stack+0x44/0x55
[ 135.551737] [<ffffffff810a88f1>] warn_slowpath_common+0x81/0xc0
[ 135.552487] [<ffffffff810a89e5>] warn_slowpath_null+0x15/0x20
[ 135.553211] [<ffffffff81448c88>] btrfs_dev_replace_start+0x398/0x440
[ 135.554051] [<ffffffff81412c3e>] btrfs_ioctl+0x1d2e/0x25c0
[ 135.554722] [<ffffffff8114c7ba>] ? __audit_syscall_entry+0xaa/0xf0
[ 135.555506] [<ffffffff8111ab36>] ? current_kernel_time64+0x56/0xa0
[ 135.556304] [<ffffffff81201e3d>] do_vfs_ioctl+0x30d/0x580
[ 135.557009] [<ffffffff8114c7ba>] ? __audit_syscall_entry+0xaa/0xf0
[ 135.557855] [<ffffffff810011d1>] ? do_audit_syscall_entry+0x61/0x70
[ 135.558669] [<ffffffff8120d1c1>] ? __fget_light+0x61/0x90
[ 135.559374] [<ffffffff81202124>] SyS_ioctl+0x74/0x80
[ 135.559987] [<ffffffff81809857>] entry_SYSCALL_64_fastpath+0x12/0x6f
[ 135.560842] ---[ end trace 2a5c1fc3205abbdd ]---
Reason:
When big data writen to fs, the whole free space will be allocated
for data chunk.
And operation as scrub need to set_block_ro(), and when there is
only one metadata chunk in system(or other metadata chunks
are all full), the function will try to allocate a new chunk,
and failed because no space in device.
Fix:
When set_block_ro failed for metadata chunk, it is not a problem
because scrub_lock paused commit_trancaction in same time, and
metadata are always cowed, so the on-the-fly writepages will not
write data into same place with scrub/replace.
Let replace continue in this case is no problem.
Tested by above script, and xfstests/011, plus 100 times xfstests/070.
Changelog v1->v2:
1: Add detail comments in source and commit-message.
2: Add dmesg detail into commit-message.
3: Limit return value of -ENOSPC to be passed.
All suggested by: Filipe Manana <fdmanana@gmail.com>
Suggested-by: Filipe Manana <fdmanana@gmail.com>
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
I've accidentally picked an already used number for the enhanced usage
filter represented by BTRFS_BALANCE_ARGS_USAGE_RANGE, clashing with
BTRFS_BALANCE_ARGS_CONVERT. Introduced during the development phase,
no backward compatibility issues.
Reported-by: Holger Hoffstätte <holger.hoffstaette@googlemail.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: bc3094673f ("btrfs: extend balance filter usage to take minimum and maximum")
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
We were using only 1 transaction unit when attempting to delete an unused
block group but in reality we need 3 + N units, where N corresponds to the
number of stripes. We were accounting only for the addition of the orphan
item (for the block group's free space cache inode) but we were not
accounting that we need to delete one block group item from the extent
tree, one free space item from the tree of tree roots and N device extent
items from the device tree.
While one unit is not enough, it worked most of the time because for each
single unit we are too pessimistic and assume an entire tree path, with
the highest possible heigth (8), needs to be COWed with eventual node
splits at every possible level in the tree, so there was usually enough
reserved space for removing all the items and adding the orphan item.
However after adding the orphan item, writepages() can by called by the VM
subsystem against the btree inode when we are under memory pressure, which
causes writeback to start for the nodes we COWed before, this forces the
operation to remove the free space item to COW again some (or all of) the
same nodes (in the tree of tree roots). Even without writepages() being
called, we could fail with ENOSPC because these items are located in
multiple trees and one of them might have a higher heigth and require
node/leaf splits at many levels, exhausting all the reserved space before
removing all the items and adding the orphan.
In the kernel 4.0 release, commit 3d84be7991 ("Btrfs: fix BUG_ON in
btrfs_orphan_add() when delete unused block group"), we attempted to fix
a BUG_ON due to ENOSPC when trying to add the orphan item by making the
cleaner kthread reserve one transaction unit before attempting to remove
the block group, but this was not enough. We had a couple user reports
still hitting the same BUG_ON after 4.0, like Stefan Priebe's report on
a 4.2-rc6 kernel for example:
http://www.spinics.net/lists/linux-btrfs/msg46070.html
So fix this by reserving all the necessary units of metadata.
Reported-by: Stefan Priebe <s.priebe@profihost.ag>
Fixes: 3d84be7991 ("Btrfs: fix BUG_ON in btrfs_orphan_add() when delete unused block group")
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
It's possible to reach a state where the cleaner kthread isn't able to
start a transaction to delete an unused block group due to lack of enough
free metadata space and due to lack of unallocated device space to allocate
a new metadata block group as well. If this happens try to use space from
the global block group reserve just like we do for unlink operations, so
that we don't reach a permanent state where starting a transaction for
filesystem operations (file creation, renames, etc) keeps failing with
-ENOSPC. Such an unfortunate state was observed on a machine where over
a dozen unused data block groups existed and the cleaner kthread was
failing to delete them due to ENOSPC error when attempting to start a
transaction, and even running balance with a -dusage=0 filter failed with
ENOSPC as well. Also unmounting and mounting again the filesystem didn't
help. Allowing the cleaner kthread to use the global block reserve to
delete the unused data block groups fixed the problem.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
btrfs_alloc_dummy_root() return an error pointer on failure, it never
returns NULL.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
The calculation of range length in btrfs_sync_file leads to signed
overflow. This was caught by PaX gcc SIZE_OVERFLOW plugin.
https://forums.grsecurity.net/viewtopic.php?f=1&t=4284
The fsync call passes 0 and LLONG_MAX, the range length does not fit to
loff_t and overflows, but the value is converted to u64 so it silently
works as expected.
The minimal fix is a typecast to u64, switching functions to take
(start, end) instead of (start, len) would be more intrusive.
Coccinelle script found that there's one more opencoded calculation of
the length.
<smpl>
@@
loff_t start, end;
@@
* end - start
</smpl>
CC: stable@vger.kernel.org
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
Pull btrfs fixes and cleanups from Chris Mason:
"Some of this got cherry-picked from a github repo this week, but I
verified the patches.
We have three small scrub cleanups and a collection of fixes"
* 'for-linus-4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
btrfs: Use fs_info directly in btrfs_delete_unused_bgs
btrfs: Fix lost-data-profile caused by balance bg
btrfs: Fix lost-data-profile caused by auto removing bg
btrfs: Remove len argument from scrub_find_csum
btrfs: Reduce unnecessary arguments in scrub_recheck_block
btrfs: Use scrub_checksum_data and scrub_checksum_tree_block for scrub_recheck_block_checksum
btrfs: Reset sblock->xxx_error stats before calling scrub_recheck_block_checksum
btrfs: scrub: setup all fields for sblock_to_check
btrfs: scrub: set error stats when tree block spanning stripes
Btrfs: fix race when listing an inode's xattrs
Btrfs: fix race leading to BUG_ON when running delalloc for nodatacow
Btrfs: fix race leading to incorrect item deletion when dropping extents
Btrfs: fix sleeping inside atomic context in qgroup rescan worker
Btrfs: fix race waiting for qgroup rescan worker
btrfs: qgroup: exit the rescan worker during umount
Btrfs: fix extent accounting for partial direct IO writes
No need to use root->fs_info in btrfs_delete_unused_bgs(),
use fs_info directly instead.
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
Reproduce:
(In integration-4.3 branch)
TEST_DEV=(/dev/vdg /dev/vdh)
TEST_DIR=/mnt/tmp
umount "$TEST_DEV" >/dev/null
mkfs.btrfs -f -d raid1 "${TEST_DEV[@]}"
mount -o nospace_cache "$TEST_DEV" "$TEST_DIR"
btrfs balance start -dusage=0 $TEST_DIR
btrfs filesystem usage $TEST_DIR
dd if=/dev/zero of="$TEST_DIR"/file count=100
btrfs filesystem usage $TEST_DIR
Result:
We can see "no data chunk" in first "btrfs filesystem usage":
# btrfs filesystem usage $TEST_DIR
Overall:
...
Metadata,single: Size:8.00MiB, Used:0.00B
/dev/vdg 8.00MiB
Metadata,RAID1: Size:122.88MiB, Used:112.00KiB
/dev/vdg 122.88MiB
/dev/vdh 122.88MiB
System,single: Size:4.00MiB, Used:0.00B
/dev/vdg 4.00MiB
System,RAID1: Size:8.00MiB, Used:16.00KiB
/dev/vdg 8.00MiB
/dev/vdh 8.00MiB
Unallocated:
/dev/vdg 1.06GiB
/dev/vdh 1.07GiB
And "data chunks changed from raid1 to single" in second
"btrfs filesystem usage":
# btrfs filesystem usage $TEST_DIR
Overall:
...
Data,single: Size:256.00MiB, Used:0.00B
/dev/vdh 256.00MiB
Metadata,single: Size:8.00MiB, Used:0.00B
/dev/vdg 8.00MiB
Metadata,RAID1: Size:122.88MiB, Used:112.00KiB
/dev/vdg 122.88MiB
/dev/vdh 122.88MiB
System,single: Size:4.00MiB, Used:0.00B
/dev/vdg 4.00MiB
System,RAID1: Size:8.00MiB, Used:16.00KiB
/dev/vdg 8.00MiB
/dev/vdh 8.00MiB
Unallocated:
/dev/vdg 1.06GiB
/dev/vdh 841.92MiB
Reason:
btrfs balance delete last data chunk in case of no data in
the filesystem, then we can see "no data chunk" by "fi usage"
command.
And when we do write operation to fs, the only available data
profile is 0x0, result is all new chunks are allocated single type.
Fix:
Allocate a data chunk explicitly to ensure we don't lose the
raid profile for data.
Test:
Test by above script, and confirmed the logic by debug output.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
Reproduce:
(In integration-4.3 branch)
TEST_DEV=(/dev/vdg /dev/vdh)
TEST_DIR=/mnt/tmp
umount "$TEST_DEV" >/dev/null
mkfs.btrfs -f -d raid1 "${TEST_DEV[@]}"
mount -o nospace_cache "$TEST_DEV" "$TEST_DIR"
umount "$TEST_DEV"
mount -o nospace_cache "$TEST_DEV" "$TEST_DIR"
btrfs filesystem usage $TEST_DIR
We can see the data chunk changed from raid1 to single:
# btrfs filesystem usage $TEST_DIR
Data,single: Size:8.00MiB, Used:0.00B
/dev/vdg 8.00MiB
#
Reason:
When a empty filesystem mount with -o nospace_cache, the last
data blockgroup will be auto-removed in umount.
Then if we mount it again, there is no data chunk in the
filesystem, so the only available data profile is 0x0, result
is all new chunks are created as single type.
Fix:
Don't auto-delete last blockgroup for a raid type.
Test:
Test by above script, and confirmed the logic by debug output.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
We don't need pass so many arguments for recheck sblock now,
this patch cleans them.
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
We can use existing scrub_checksum_data() and scrub_checksum_tree_block()
for scrub_recheck_block_checksum(), instead of write duplicated code.
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
We should reset sblock->xxx_error stats before calling
scrub_recheck_block_checksum().
Current code run correctly because all sblock are allocated by
k[cz]alloc(), and the error stats are not got changed.
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
scrub_setup_recheck_block() isn't setup all necessary fields for
sblock_to_check because history reason.
So current code need more arguments in severial functions,
and more local variables, just to passing these lacked values to
necessary place.
This patch setup above fields to sblock_to_check in
scrub_setup_recheck_block(), for:
1: more cleanup for function arg, local variable
2: to make sblock_to_check complete, then we can use sblock_to_check
without concern about some uninitialized member.
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
It is better to show error stats to user when we found tree block
spanning stripes.
On a btrfs created by old version of btrfs-convert:
Before patch:
# btrfs scrub start -B /dev/vdh
scrub done for 8b342d35-2904-41ab-b3cb-2f929709cf47
scrub started at Tue Aug 25 21:19:09 2015 and finished after 00:00:00
total bytes scrubbed: 53.54MiB with 0 errors
# dmesg
...
[ 128.711434] BTRFS error (device vdh): scrub: tree block 27054080 spanning stripes, ignored. logical=27000832
[ 128.712744] BTRFS error (device vdh): scrub: tree block 27054080 spanning stripes, ignored. logical=27066368
...
After patch:
# btrfs scrub start -B /dev/vdh
scrub done for ff7f844b-7a4e-4b1a-88a9-8252ab25be1b
scrub started at Tue Aug 25 21:42:29 2015 and finished after 00:00:00
total bytes scrubbed: 53.60MiB with 2 errors
error details:
corrected errors: 0, uncorrectable errors: 2, unverified errors: 0
ERROR: There are uncorrectable errors.
# dmesg
...omit...
#
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
new_valid_dev() always returns 1, so the !new_valid_dev() check is not
needed. Remove it.
Signed-off-by: Yaowei Bai <bywxiaobai@163.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Chris Mason <clm@fb.com>
Cc: Josef Bacik <jbacik@fb.com>
Acked-by: David Sterba <dsterba@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When listing a inode's xattrs we have a time window where we race against
a concurrent operation for adding a new hard link for our inode that makes
us not return any xattr to user space. In order for this to happen, the
first xattr of our inode needs to be at slot 0 of a leaf and the previous
leaf must still have room for an inode ref (or extref) item, and this can
happen because an inode's listxattrs callback does not lock the inode's
i_mutex (nor does the VFS does it for us), but adding a hard link to an
inode makes the VFS lock the inode's i_mutex before calling the inode's
link callback.
If we have the following leafs:
Leaf X (has N items) Leaf Y
[ ... (257 INODE_ITEM 0) (257 INODE_REF 256) ] [ (257 XATTR_ITEM 12345), ... ]
slot N - 2 slot N - 1 slot 0
The race illustrated by the following sequence diagram is possible:
CPU 1 CPU 2
btrfs_listxattr()
searches for key (257 XATTR_ITEM 0)
gets path with path->nodes[0] == leaf X
and path->slots[0] == N
because path->slots[0] is >=
btrfs_header_nritems(leaf X), it calls
btrfs_next_leaf()
btrfs_next_leaf()
releases the path
adds key (257 INODE_REF 666)
to the end of leaf X (slot N),
and leaf X now has N + 1 items
searches for the key (257 INODE_REF 256),
with path->keep_locks == 1, because that
is the last key it saw in leaf X before
releasing the path
ends up at leaf X again and it verifies
that the key (257 INODE_REF 256) is no
longer the last key in leaf X, so it
returns with path->nodes[0] == leaf X
and path->slots[0] == N, pointing to
the new item with key (257 INODE_REF 666)
btrfs_listxattr's loop iteration sees that
the type of the key pointed by the path is
different from the type BTRFS_XATTR_ITEM_KEY
and so it breaks the loop and stops looking
for more xattr items
--> the application doesn't get any xattr
listed for our inode
So fix this by breaking the loop only if the key's type is greater than
BTRFS_XATTR_ITEM_KEY and skip the current key if its type is smaller.
Cc: stable@vger.kernel.org
Signed-off-by: Filipe Manana <fdmanana@suse.com>
If we are using the NO_HOLES feature, we have a tiny time window when
running delalloc for a nodatacow inode where we can race with a concurrent
link or xattr add operation leading to a BUG_ON.
This happens because at run_delalloc_nocow() we end up casting a leaf item
of type BTRFS_INODE_[REF|EXTREF]_KEY or of type BTRFS_XATTR_ITEM_KEY to a
file extent item (struct btrfs_file_extent_item) and then analyse its
extent type field, which won't match any of the expected extent types
(values BTRFS_FILE_EXTENT_[REG|PREALLOC|INLINE]) and therefore trigger an
explicit BUG_ON(1).
The following sequence diagram shows how the race happens when running a
no-cow dellaloc range [4K, 8K[ for inode 257 and we have the following
neighbour leafs:
Leaf X (has N items) Leaf Y
[ ... (257 INODE_ITEM 0) (257 INODE_REF 256) ] [ (257 EXTENT_DATA 8192), ... ]
slot N - 2 slot N - 1 slot 0
(Note the implicit hole for inode 257 regarding the [0, 8K[ range)
CPU 1 CPU 2
run_dealloc_nocow()
btrfs_lookup_file_extent()
--> searches for a key with value
(257 EXTENT_DATA 4096) in the
fs/subvol tree
--> returns us a path with
path->nodes[0] == leaf X and
path->slots[0] == N
because path->slots[0] is >=
btrfs_header_nritems(leaf X), it
calls btrfs_next_leaf()
btrfs_next_leaf()
--> releases the path
hard link added to our inode,
with key (257 INODE_REF 500)
added to the end of leaf X,
so leaf X now has N + 1 keys
--> searches for the key
(257 INODE_REF 256), because
it was the last key in leaf X
before it released the path,
with path->keep_locks set to 1
--> ends up at leaf X again and
it verifies that the key
(257 INODE_REF 256) is no longer
the last key in the leaf, so it
returns with path->nodes[0] ==
leaf X and path->slots[0] == N,
pointing to the new item with
key (257 INODE_REF 500)
the loop iteration of run_dealloc_nocow()
does not break out the loop and continues
because the key referenced in the path
at path->nodes[0] and path->slots[0] is
for inode 257, its type is < BTRFS_EXTENT_DATA_KEY
and its offset (500) is less then our delalloc
range's end (8192)
the item pointed by the path, an inode reference item,
is (incorrectly) interpreted as a file extent item and
we get an invalid extent type, leading to the BUG_ON(1):
if (extent_type == BTRFS_FILE_EXTENT_REG ||
extent_type == BTRFS_FILE_EXTENT_PREALLOC) {
(...)
} else if (extent_type == BTRFS_FILE_EXTENT_INLINE) {
(...)
} else {
BUG_ON(1)
}
The same can happen if a xattr is added concurrently and ends up having
a key with an offset smaller then the delalloc's range end.
So fix this by skipping keys with a type smaller than
BTRFS_EXTENT_DATA_KEY.
Cc: stable@vger.kernel.org
Signed-off-by: Filipe Manana <fdmanana@suse.com>
While running a stress test I got the following warning triggered:
[191627.672810] ------------[ cut here ]------------
[191627.673949] WARNING: CPU: 8 PID: 8447 at fs/btrfs/file.c:779 __btrfs_drop_extents+0x391/0xa50 [btrfs]()
(...)
[191627.701485] Call Trace:
[191627.702037] [<ffffffff8145f077>] dump_stack+0x4f/0x7b
[191627.702992] [<ffffffff81095de5>] ? console_unlock+0x356/0x3a2
[191627.704091] [<ffffffff8104b3b0>] warn_slowpath_common+0xa1/0xbb
[191627.705380] [<ffffffffa0664499>] ? __btrfs_drop_extents+0x391/0xa50 [btrfs]
[191627.706637] [<ffffffff8104b46d>] warn_slowpath_null+0x1a/0x1c
[191627.707789] [<ffffffffa0664499>] __btrfs_drop_extents+0x391/0xa50 [btrfs]
[191627.709155] [<ffffffff8115663c>] ? cache_alloc_debugcheck_after.isra.32+0x171/0x1d0
[191627.712444] [<ffffffff81155007>] ? kmemleak_alloc_recursive.constprop.40+0x16/0x18
[191627.714162] [<ffffffffa06570c9>] insert_reserved_file_extent.constprop.40+0x83/0x24e [btrfs]
[191627.715887] [<ffffffffa065422b>] ? start_transaction+0x3bb/0x610 [btrfs]
[191627.717287] [<ffffffffa065b604>] btrfs_finish_ordered_io+0x273/0x4e2 [btrfs]
[191627.728865] [<ffffffffa065b888>] finish_ordered_fn+0x15/0x17 [btrfs]
[191627.730045] [<ffffffffa067d688>] normal_work_helper+0x14c/0x32c [btrfs]
[191627.731256] [<ffffffffa067d96a>] btrfs_endio_write_helper+0x12/0x14 [btrfs]
[191627.732661] [<ffffffff81061119>] process_one_work+0x24c/0x4ae
[191627.733822] [<ffffffff810615b0>] worker_thread+0x206/0x2c2
[191627.734857] [<ffffffff810613aa>] ? process_scheduled_works+0x2f/0x2f
[191627.736052] [<ffffffff810613aa>] ? process_scheduled_works+0x2f/0x2f
[191627.737349] [<ffffffff810669a6>] kthread+0xef/0xf7
[191627.738267] [<ffffffff810f3b3a>] ? time_hardirqs_on+0x15/0x28
[191627.739330] [<ffffffff810668b7>] ? __kthread_parkme+0xad/0xad
[191627.741976] [<ffffffff81465592>] ret_from_fork+0x42/0x70
[191627.743080] [<ffffffff810668b7>] ? __kthread_parkme+0xad/0xad
[191627.744206] ---[ end trace bbfddacb7aaada8d ]---
$ cat -n fs/btrfs/file.c
691 int __btrfs_drop_extents(struct btrfs_trans_handle *trans,
(...)
758 btrfs_item_key_to_cpu(leaf, &key, path->slots[0]);
759 if (key.objectid > ino ||
760 key.type > BTRFS_EXTENT_DATA_KEY || key.offset >= end)
761 break;
762
763 fi = btrfs_item_ptr(leaf, path->slots[0],
764 struct btrfs_file_extent_item);
765 extent_type = btrfs_file_extent_type(leaf, fi);
766
767 if (extent_type == BTRFS_FILE_EXTENT_REG ||
768 extent_type == BTRFS_FILE_EXTENT_PREALLOC) {
(...)
774 } else if (extent_type == BTRFS_FILE_EXTENT_INLINE) {
(...)
778 } else {
779 WARN_ON(1);
780 extent_end = search_start;
781 }
(...)
This happened because the item we were processing did not match a file
extent item (its key type != BTRFS_EXTENT_DATA_KEY), and even on this
case we cast the item to a struct btrfs_file_extent_item pointer and
then find a type field value that does not match any of the expected
values (BTRFS_FILE_EXTENT_[REG|PREALLOC|INLINE]). This scenario happens
due to a tiny time window where a race can happen as exemplified below.
For example, consider the following scenario where we're using the
NO_HOLES feature and we have the following two neighbour leafs:
Leaf X (has N items) Leaf Y
[ ... (257 INODE_ITEM 0) (257 INODE_REF 256) ] [ (257 EXTENT_DATA 8192), ... ]
slot N - 2 slot N - 1 slot 0
Our inode 257 has an implicit hole in the range [0, 8K[ (implicit rather
than explicit because NO_HOLES is enabled). Now if our inode has an
ordered extent for the range [4K, 8K[ that is finishing, the following
can happen:
CPU 1 CPU 2
btrfs_finish_ordered_io()
insert_reserved_file_extent()
__btrfs_drop_extents()
Searches for the key
(257 EXTENT_DATA 4096) through
btrfs_lookup_file_extent()
Key not found and we get a path where
path->nodes[0] == leaf X and
path->slots[0] == N
Because path->slots[0] is >=
btrfs_header_nritems(leaf X), we call
btrfs_next_leaf()
btrfs_next_leaf() releases the path
inserts key
(257 INODE_REF 4096)
at the end of leaf X,
leaf X now has N + 1 keys,
and the new key is at
slot N
btrfs_next_leaf() searches for
key (257 INODE_REF 256), with
path->keep_locks set to 1,
because it was the last key it
saw in leaf X
finds it in leaf X again and
notices it's no longer the last
key of the leaf, so it returns 0
with path->nodes[0] == leaf X and
path->slots[0] == N (which is now
< btrfs_header_nritems(leaf X)),
pointing to the new key
(257 INODE_REF 4096)
__btrfs_drop_extents() casts the
item at path->nodes[0], slot
path->slots[0], to a struct
btrfs_file_extent_item - it does
not skip keys for the target
inode with a type less than
BTRFS_EXTENT_DATA_KEY
(BTRFS_INODE_REF_KEY < BTRFS_EXTENT_DATA_KEY)
sees a bogus value for the type
field triggering the WARN_ON in
the trace shown above, and sets
extent_end = search_start (4096)
does the if-then-else logic to
fixup 0 length extent items created
by a past bug from hole punching:
if (extent_end == key.offset &&
extent_end >= search_start)
goto delete_extent_item;
that evaluates to true and it ends
up deleting the key pointed to by
path->slots[0], (257 INODE_REF 4096),
from leaf X
The same could happen for example for a xattr that ends up having a key
with an offset value that matches search_start (very unlikely but not
impossible).
So fix this by ensuring that keys smaller than BTRFS_EXTENT_DATA_KEY are
skipped, never casted to struct btrfs_file_extent_item and never deleted
by accident. Also protect against the unexpected case of getting a key
for a lower inode number by skipping that key and issuing a warning.
Cc: stable@vger.kernel.org
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Merge second patch-bomb from Andrew Morton:
- most of the rest of MM
- procfs
- lib/ updates
- printk updates
- bitops infrastructure tweaks
- checkpatch updates
- nilfs2 update
- signals
- various other misc bits: coredump, seqfile, kexec, pidns, zlib, ipc,
dma-debug, dma-mapping, ...
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (102 commits)
ipc,msg: drop dst nil validation in copy_msg
include/linux/zutil.h: fix usage example of zlib_adler32()
panic: release stale console lock to always get the logbuf printed out
dma-debug: check nents in dma_sync_sg*
dma-mapping: tidy up dma_parms default handling
pidns: fix set/getpriority and ioprio_set/get in PRIO_USER mode
kexec: use file name as the output message prefix
fs, seqfile: always allow oom killer
seq_file: reuse string_escape_str()
fs/seq_file: use seq_* helpers in seq_hex_dump()
coredump: change zap_threads() and zap_process() to use for_each_thread()
coredump: ensure all coredumping tasks have SIGNAL_GROUP_COREDUMP
signal: remove jffs2_garbage_collect_thread()->allow_signal(SIGCONT)
signal: introduce kernel_signal_stop() to fix jffs2_garbage_collect_thread()
signal: turn dequeue_signal_lock() into kernel_dequeue_signal()
signals: kill block_all_signals() and unblock_all_signals()
nilfs2: fix gcc uninitialized-variable warnings in powerpc build
nilfs2: fix gcc unused-but-set-variable warnings
MAINTAINERS: nilfs2: add header file for tracing
nilfs2: add tracepoints for analyzing reading and writing metadata files
...
There are many places which use mapping_gfp_mask to restrict a more
generic gfp mask which would be used for allocations which are not
directly related to the page cache but they are performed in the same
context.
Let's introduce a helper function which makes the restriction explicit and
easier to track. This patch doesn't introduce any functional changes.
[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Michal Hocko <mhocko@suse.com>
Suggested-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
__GFP_WAIT has been used to identify atomic context in callers that hold
spinlocks or are in interrupts. They are expected to be high priority and
have access one of two watermarks lower than "min" which can be referred
to as the "atomic reserve". __GFP_HIGH users get access to the first
lower watermark and can be called the "high priority reserve".
Over time, callers had a requirement to not block when fallback options
were available. Some have abused __GFP_WAIT leading to a situation where
an optimisitic allocation with a fallback option can access atomic
reserves.
This patch uses __GFP_ATOMIC to identify callers that are truely atomic,
cannot sleep and have no alternative. High priority users continue to use
__GFP_HIGH. __GFP_DIRECT_RECLAIM identifies callers that can sleep and
are willing to enter direct reclaim. __GFP_KSWAPD_RECLAIM to identify
callers that want to wake kswapd for background reclaim. __GFP_WAIT is
redefined as a caller that is willing to enter direct reclaim and wake
kswapd for background reclaim.
This patch then converts a number of sites
o __GFP_ATOMIC is used by callers that are high priority and have memory
pools for those requests. GFP_ATOMIC uses this flag.
o Callers that have a limited mempool to guarantee forward progress clear
__GFP_DIRECT_RECLAIM but keep __GFP_KSWAPD_RECLAIM. bio allocations fall
into this category where kswapd will still be woken but atomic reserves
are not used as there is a one-entry mempool to guarantee progress.
o Callers that are checking if they are non-blocking should use the
helper gfpflags_allow_blocking() where possible. This is because
checking for __GFP_WAIT as was done historically now can trigger false
positives. Some exceptions like dm-crypt.c exist where the code intent
is clearer if __GFP_DIRECT_RECLAIM is used instead of the helper due to
flag manipulations.
o Callers that built their own GFP flags instead of starting with GFP_KERNEL
and friends now also need to specify __GFP_KSWAPD_RECLAIM.
The first key hazard to watch out for is callers that removed __GFP_WAIT
and was depending on access to atomic reserves for inconspicuous reasons.
In some cases it may be appropriate for them to use __GFP_HIGH.
The second key hazard is callers that assembled their own combination of
GFP flags instead of starting with something like GFP_KERNEL. They may
now wish to specify __GFP_KSWAPD_RECLAIM. It's almost certainly harmless
if it's missed in most cases as other activity will wake kswapd.
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Vitaly Wool <vitalywool@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull btrfs updates from Chris Mason:
"We have a lot of subvolume quota improvements in here, along with big
piles of cleanups from Dave Sterba and Anand Jain and others.
Josef pitched in a batch of allocator fixes based on production use
here at FB. We found that mount -o ssd_spread greatly improved our
performance on hardware raid5/6, but it exposed some CPU bottlenecks
in the allocator. These patches make a huge difference"
* 'for-linus-4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: (100 commits)
Btrfs: fix hole punching when using the no-holes feature
Btrfs: find_free_extent: Do not erroneously skip LOOP_CACHING_WAIT state
btrfs: Fix a data space underflow warning
btrfs: qgroup: Fix a rebase bug which will cause qgroup double free
btrfs: qgroup: Fix a race in delayed_ref which leads to abort trans
btrfs: clear PF_NOFREEZE in cleaner_kthread()
btrfs: qgroup: Don't copy extent buffer to do qgroup rescan
btrfs: add balance filters limits, stripes and usage to supported mask
btrfs: extend balance filter usage to take minimum and maximum
btrfs: add balance filter for stripes
btrfs: extend balance filter limit to take minimum and maximum
btrfs: fix use after free iterating extrefs
btrfs: check unsupported filters in balance arguments
Btrfs: fix regression running delayed references when using qgroups
Btrfs: fix regression when running delayed references
Btrfs: don't do extra bitmap search in one bit case
Btrfs: keep track of largest extent in bitmaps
Btrfs: don't keep trying to build clusters if we are fragmented
Btrfs: cut down on loops through the allocator
Btrfs: don't continue setting up space cache when enospc
...
We were initializing the completion (fs_info->qgroup_rescan_completion)
object after releasing the qgroup rescan lock, which gives a small time
window for a rescan waiter to not actually wait for the rescan worker
to finish. Example:
CPU 1 CPU 2
fs_info->qgroup_rescan_completion->done is 0
btrfs_qgroup_rescan_worker()
complete_all(&fs_info->qgroup_rescan_completion)
sets fs_info->qgroup_rescan_completion->done
to UINT_MAX / 2
... do some other stuff ....
qgroup_rescan_init()
mutex_lock(&fs_info->qgroup_rescan_lock)
set flag BTRFS_QGROUP_STATUS_FLAG_RESCAN
in fs_info->qgroup_flags
mutex_unlock(&fs_info->qgroup_rescan_lock)
btrfs_qgroup_wait_for_completion()
mutex_lock(&fs_info->qgroup_rescan_lock)
sees flag BTRFS_QGROUP_STATUS_FLAG_RESCAN
in fs_info->qgroup_flags
mutex_unlock(&fs_info->qgroup_rescan_lock)
wait_for_completion_interruptible(
&fs_info->qgroup_rescan_completion)
fs_info->qgroup_rescan_completion->done
is > 0 so it returns immediately
init_completion(&fs_info->qgroup_rescan_completion)
sets fs_info->qgroup_rescan_completion->done to 0
So fix this by initializing the completion object while holding the mutex
fs_info->qgroup_rescan_lock.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
I was hitting a consistent NULL pointer dereference during shutdown that
showed the trace running through end_workqueue_bio(). I traced it back to
the endio_meta_workers workqueue being poked after it had already been
destroyed.
Eventually I found that the root cause was a qgroup rescan that was still
in progress while we were stopping all the btrfs workers.
Currently we explicitly pause balance and scrub operations in
close_ctree(), but we do nothing to stop the qgroup rescan. We should
probably be doing the same for qgroup rescan, but that's a much larger
change. This small change is good enough to allow me to unmount without
crashing.
Signed-off-by: Justin Maggard <jmaggard@netgear.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
When doing a write using direct IO we can end up not doing the whole write
operation using the direct IO path, in that case we fallback to a buffered
write to do the remaining IO. This happens for example if the range we are
writing to contains a compressed extent.
When we do a partial write and fallback to buffered IO, due to the
existence of a compressed extent for example, we end up not adjusting the
outstanding extents counter of our inode which ends up getting decremented
twice, once by the DIO ordered extent for the partial write and once again
by btrfs_direct_IO(), resulting in an arithmetic underflow at
extent-tree.c:drop_outstanding_extent(). For example if we have:
extents [ prealloc extent ] [ compressed extent ]
offsets A B C D E
and at the moment our inode's outstanding extents counter is 0, if we do a
direct IO write against the range [B, D[ (which has a length smaller than
128Mb), we end up bumping our inode's outstanding extents counter to 1, we
create a DIO ordered extent for the range [B, C[ and then fallback to a
buffered write for the range [C, D[. The direct IO handler
(inode.c:btrfs_direct_IO()) decrements the outstanding extents counter by
1, leaving it with a value of 0, through a call to
btrfs_delalloc_release_space() and then shortly after the DIO ordered
extent finishes and calls btrfs_delalloc_release_metadata() which ends
up to attempt to decrement the inode's outstanding extents counter by 1,
resulting in an assertion failure at drop_outstanding_extent() because
the operation would result in an arithmetic underflow (0 - 1). This
produces the following trace:
[125471.336838] BTRFS: assertion failed: BTRFS_I(inode)->outstanding_extents >= num_extents, file: fs/btrfs/extent-tree.c, line: 5526
[125471.338844] ------------[ cut here ]------------
[125471.340745] kernel BUG at fs/btrfs/ctree.h:4173!
[125471.340745] invalid opcode: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC
[125471.340745] Modules linked in: btrfs f2fs xfs libcrc32c dm_flakey dm_mod crc32c_generic xor raid6_pq nfsd auth_rpcgss oid_registry nfs_acl nfs lockd grace fscache sunrpc loop fuse parport_pc acpi_cpufreq psmouse i2c_piix4 parport pcspkr serio_raw microcode processor evdev i2c_core button ext4 crc16 jbd2 mbcache sd_mod sg sr_mod cdrom ata_generic virtio_scsi ata_piix virtio_pci virtio_ring floppy libata virtio e1000 scsi_mod [last unloaded: btrfs]
[125471.340745] CPU: 10 PID: 23649 Comm: kworker/u32:1 Tainted: G W 4.3.0-rc5-btrfs-next-17+ #1
[125471.340745] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.8.1-0-g4adadbd-20150316_085822-nilsson.home.kraxel.org 04/01/2014
[125471.340745] Workqueue: btrfs-endio-write btrfs_endio_write_helper [btrfs]
[125471.340745] task: ffff8804244fcf80 ti: ffff88040a118000 task.ti: ffff88040a118000
[125471.340745] RIP: 0010:[<ffffffffa0550da1>] [<ffffffffa0550da1>] assfail.constprop.46+0x1e/0x20 [btrfs]
[125471.340745] RSP: 0018:ffff88040a11bc78 EFLAGS: 00010296
[125471.340745] RAX: 0000000000000075 RBX: 0000000000005000 RCX: 0000000000000000
[125471.340745] RDX: ffffffff81098f93 RSI: ffffffff8147c619 RDI: 00000000ffffffff
[125471.340745] RBP: ffff88040a11bc78 R08: 0000000000000001 R09: 0000000000000000
[125471.340745] R10: ffff88040a11bc08 R11: ffffffff81651000 R12: ffff8803efb4a000
[125471.340745] R13: ffff8803efb4a000 R14: 0000000000000000 R15: ffff8802f8e33c88
[125471.340745] FS: 0000000000000000(0000) GS:ffff88043dd40000(0000) knlGS:0000000000000000
[125471.340745] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[125471.340745] CR2: 00007fae7ca86095 CR3: 0000000001a0b000 CR4: 00000000000006e0
[125471.340745] Stack:
[125471.340745] ffff88040a11bc88 ffffffffa04ca0cd ffff88040a11bcc8 ffffffffa04ceeb1
[125471.340745] ffff8802f8e33940 ffff8802c93eadb0 ffff8802f8e0bf50 ffff8803efb4a000
[125471.340745] 0000000000000000 ffff8802f8e33c88 ffff88040a11bd38 ffffffffa04eccfa
[125471.340745] Call Trace:
[125471.340745] [<ffffffffa04ca0cd>] drop_outstanding_extent+0x3d/0x6d [btrfs]
[125471.340745] [<ffffffffa04ceeb1>] btrfs_delalloc_release_metadata+0x51/0xdd [btrfs]
[125471.340745] [<ffffffffa04eccfa>] btrfs_finish_ordered_io+0x420/0x4eb [btrfs]
[125471.340745] [<ffffffffa04ecdda>] finish_ordered_fn+0x15/0x17 [btrfs]
[125471.340745] [<ffffffffa050e6e8>] normal_work_helper+0x14c/0x32a [btrfs]
[125471.340745] [<ffffffffa050e9c8>] btrfs_endio_write_helper+0x12/0x14 [btrfs]
[125471.340745] [<ffffffff81063b23>] process_one_work+0x24a/0x4ac
[125471.340745] [<ffffffff81064285>] worker_thread+0x206/0x2c2
[125471.340745] [<ffffffff8106407f>] ? rescuer_thread+0x2cb/0x2cb
[125471.340745] [<ffffffff8106407f>] ? rescuer_thread+0x2cb/0x2cb
[125471.340745] [<ffffffff8106904d>] kthread+0xef/0xf7
[125471.340745] [<ffffffff81068f5e>] ? kthread_parkme+0x24/0x24
[125471.340745] [<ffffffff8147d10f>] ret_from_fork+0x3f/0x70
[125471.340745] [<ffffffff81068f5e>] ? kthread_parkme+0x24/0x24
[125471.340745] Code: a5 55 a0 48 89 e5 e8 42 50 bc e0 0f 0b 55 89 f1 48 c7 c2 f0 a8 55 a0 48 89 fe 31 c0 48 c7 c7 14 aa 55 a0 48 89 e5 e8 22 50 bc e0 <0f> 0b 0f 1f 44 00 00 55 31 c9 ba 18 00 00 00 48 89 e5 41 56 41
[125471.340745] RIP [<ffffffffa0550da1>] assfail.constprop.46+0x1e/0x20 [btrfs]
[125471.340745] RSP <ffff88040a11bc78>
[125471.539620] ---[ end trace 144259f7838b4aa4 ]---
So fix this by ensuring we adjust the outstanding extents counter when we
do the fallback just like we do for the case where the whole write can be
done through the direct IO path.
We were also adjusting the outstanding extents counter by a constant value
of 1, which is incorrect because we were ignorning that we account extents
in BTRFS_MAX_EXTENT_SIZE units, o fix that as well.
The following test case for fstests reproduces this issue:
seq=`basename $0`
seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
tmp=/tmp/$$
status=1 # failure is the default!
trap "_cleanup; exit \$status" 0 1 2 3 15
_cleanup()
{
rm -f $tmp.*
}
# get standard environment, filters and checks
. ./common/rc
. ./common/filter
# real QA test starts here
_need_to_be_root
_supported_fs btrfs
_supported_os Linux
_require_scratch
_require_xfs_io_command "falloc"
rm -f $seqres.full
_scratch_mkfs >>$seqres.full 2>&1
_scratch_mount "-o compress"
# Create a compressed extent covering the range [700K, 800K[.
$XFS_IO_PROG -f -s -c "pwrite -S 0xaa -b 100K 700K 100K" \
$SCRATCH_MNT/foo | _filter_xfs_io
# Create prealloc extent covering the range [600K, 700K[.
$XFS_IO_PROG -c "falloc 600K 100K" $SCRATCH_MNT/foo
# Write 80K of data to the range [640K, 720K[ using direct IO. This
# range covers both the prealloc extent and the compressed extent.
# Because there's a compressed extent in the range we are writing to,
# the DIO write code path ends up only writing the first 60k of data,
# which goes to the prealloc extent, and then falls back to buffered IO
# for writing the remaining 20K of data - because that remaining data
# maps to a file range containing a compressed extent.
# When falling back to buffered IO, we used to trigger an assertion when
# releasing reserved space due to bad accounting of the inode's
# outstanding extents counter, which was set to 1 but we ended up
# decrementing it by 1 twice, once through the ordered extent for the
# 60K of data we wrote using direct IO, and once through the main direct
# IO handler (inode.cbtrfs_direct_IO()) because the direct IO write
# wrote less than 80K of data (60K).
$XFS_IO_PROG -d -c "pwrite -S 0xbb -b 80K 640K 80K" \
$SCRATCH_MNT/foo | _filter_xfs_io
# Now similar test as above but for very large write operations. This
# triggers special cases for an inode's outstanding extents accounting,
# as internally btrfs logically splits extents into 128Mb units.
$XFS_IO_PROG -f -s \
-c "pwrite -S 0xaa -b 128M 258M 128M" \
-c "falloc 0 258M" \
$SCRATCH_MNT/bar | _filter_xfs_io
$XFS_IO_PROG -d -c "pwrite -S 0xbb -b 256M 3M 256M" $SCRATCH_MNT/bar \
| _filter_xfs_io
# Now verify the file contents are correct and that they are the same
# even after unmounting and mounting the fs again (or evicting the page
# cache).
#
# For file foo, all bytes in the range [0, 640K[ must have a value of
# 0x00, all bytes in the range [640K, 720K[ must have a value of 0xbb
# and all bytes in the range [720K, 800K[ must have a value of 0xaa.
#
# For file bar, all bytes in the range [0, 3M[ must havea value of 0x00,
# all bytes in the range [3M, 259M[ must have a value of 0xbb and all
# bytes in the range [259M, 386M[ must have a value of 0xaa.
#
echo "File digests before remounting the file system:"
md5sum $SCRATCH_MNT/foo | _filter_scratch
md5sum $SCRATCH_MNT/bar | _filter_scratch
_scratch_remount
echo "File digests after remounting the file system:"
md5sum $SCRATCH_MNT/foo | _filter_scratch
md5sum $SCRATCH_MNT/bar | _filter_scratch
status=0
exit
Fixes: e1cbbfa5f5 ("Btrfs: fix outstanding_extents accounting in DIO")
Fixes: 3e05bde8c3 ("Btrfs: only adjust outstanding_extents when we do a short write")
Signed-off-by: Filipe Manana <fdmanana@suse.com>
When we are using the no-holes feature, if we punch a hole into a file
range that already contains a hole which overlaps the range we are passing
to fallocate(), we end up removing the extent map that represents the
existing hole without adding a new one. This happens because with the
no-holes feature we do not have explicit extent items to represent holes
and therefore the call to __btrfs_drop_extents(), made from
btrfs_punch_hole(), returns an end offset to the variable drop_end that
is smaller than the end of the range passed to fallocate(), while it
drops all existing extent maps in that range.
Normally having a missing extent map is not a problem, for example for
a readpages() operation we just end up building the extent map by
looking at the fs/subvol tree for a matching extent item (or a lack of
one for implicit holes). However for an fsync that uses the fast path,
which needs to look at the list of modified extent maps, this means
the fsync will not record information about the complete hole we had
before the fallocate() call into the log tree, resulting in a file with
content/layout that does not match what we had neither before nor after
the hole punch operation.
The following test case for fstests reproduces the issue. It fails without
this change because we get a file with a different digest after the fsync
log replay and also with a different extent/hole layout.
seq=`basename $0`
seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
tmp=/tmp/$$
status=1 # failure is the default!
trap "_cleanup; exit \$status" 0 1 2 3 15
_cleanup()
{
_cleanup_flakey
rm -f $tmp.*
}
# get standard environment, filters and checks
. ./common/rc
. ./common/filter
. ./common/punch
. ./common/dmflakey
# real QA test starts here
_need_to_be_root
_supported_fs generic
_supported_os Linux
_require_scratch
_require_xfs_io_command "fpunch"
_require_xfs_io_command "fiemap"
_require_dm_target flakey
_require_metadata_journaling $SCRATCH_DEV
# This test was motivated by an issue found in btrfs when the btrfs
# no-holes feature is enabled (introduced in kernel 3.14). So enable
# the feature if the fs being tested is btrfs.
if [ $FSTYP == "btrfs" ]; then
_require_btrfs_fs_feature "no_holes"
_require_btrfs_mkfs_feature "no-holes"
MKFS_OPTIONS="$MKFS_OPTIONS -O no-holes"
fi
rm -f $seqres.full
_scratch_mkfs >>$seqres.full 2>&1
_init_flakey
_mount_flakey
# Create out test file with some data and then fsync it.
# We do the fsync only to make sure the last fsync we do in this test
# triggers the fast code path of btrfs' fsync implementation, a
# condition necessary to trigger the bug btrfs had.
$XFS_IO_PROG -f -c "pwrite -S 0xaa 0K 128K" \
-c "fsync" \
$SCRATCH_MNT/foobar | _filter_xfs_io
# Now punch a hole against the range [96K, 128K[.
$XFS_IO_PROG -c "fpunch 96K 32K" $SCRATCH_MNT/foobar
# Punch another hole against a range that overlaps the previous range
# and ends beyond eof.
$XFS_IO_PROG -c "fpunch 64K 128K" $SCRATCH_MNT/foobar
# Punch another hole against a range that overlaps the first range
# ([96K, 128K[) and ends at eof.
$XFS_IO_PROG -c "fpunch 32K 96K" $SCRATCH_MNT/foobar
# Fsync our file. We want to verify that, after a power failure and
# mounting the filesystem again, the file content reflects all the hole
# punch operations.
$XFS_IO_PROG -c "fsync" $SCRATCH_MNT/foobar
echo "File digest before power failure:"
md5sum $SCRATCH_MNT/foobar | _filter_scratch
echo "Fiemap before power failure:"
$XFS_IO_PROG -c "fiemap -v" $SCRATCH_MNT/foobar | _filter_fiemap
# Silently drop all writes and umount to simulate a crash/power failure.
_load_flakey_table $FLAKEY_DROP_WRITES
_unmount_flakey
# Allow writes again, mount to trigger log replay and validate file
# contents.
_load_flakey_table $FLAKEY_ALLOW_WRITES
_mount_flakey
echo "File digest after log replay:"
# Must match the same digest we got before the power failure.
md5sum $SCRATCH_MNT/foobar | _filter_scratch
echo "Fiemap after log replay:"
# Must match the same extent listing we got before the power failure.
$XFS_IO_PROG -c "fiemap -v" $SCRATCH_MNT/foobar | _filter_fiemap
_unmount_flakey
status=0
exit
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
When executing generic/001 in a loop on a ppc64 machine (with both sectorsize
and nodesize set to 64k), the following call trace is observed,
WARNING: at /root/repos/linux/fs/btrfs/locking.c:253
Modules linked in:
CPU: 2 PID: 8353 Comm: umount Not tainted 4.3.0-rc5-13676-ga5e681d #54
task: c0000000f2b1f560 ti: c0000000f6008000 task.ti: c0000000f6008000
NIP: c000000000520c88 LR: c0000000004a3b34 CTR: 0000000000000000
REGS: c0000000f600a820 TRAP: 0700 Not tainted (4.3.0-rc5-13676-ga5e681d)
MSR: 8000000102029032 <SF,VEC,EE,ME,IR,DR,RI> CR: 24444884 XER: 00000000
CFAR: c0000000004a3b30 SOFTE: 1
GPR00: c0000000004a3b34 c0000000f600aaa0 c00000000108ac00 c0000000f5a808c0
GPR04: 0000000000000000 c0000000f600ae60 0000000000000000 0000000000000005
GPR08: 00000000000020a1 0000000000000001 c0000000f2b1f560 0000000000000030
GPR12: 0000000084842882 c00000000fdc0900 c0000000f600ae60 c0000000f070b800
GPR16: 0000000000000000 c0000000f3c8a000 0000000000000000 0000000000000049
GPR20: 0000000000000001 0000000000000001 c0000000f5aa01f8 0000000000000000
GPR24: 0f83e0f83e0f83e1 c0000000f5a808c0 c0000000f3c8d000 c000000000000000
GPR28: c0000000f600ae74 0000000000000001 c0000000f3c8d000 c0000000f5a808c0
NIP [c000000000520c88] .btrfs_tree_lock+0x48/0x2a0
LR [c0000000004a3b34] .btrfs_lock_root_node+0x44/0x80
Call Trace:
[c0000000f600aaa0] [c0000000f600ab80] 0xc0000000f600ab80 (unreliable)
[c0000000f600ab80] [c0000000004a3b34] .btrfs_lock_root_node+0x44/0x80
[c0000000f600ac00] [c0000000004a99dc] .btrfs_search_slot+0xa8c/0xc00
[c0000000f600ad40] [c0000000004ab878] .btrfs_insert_empty_items+0x98/0x120
[c0000000f600adf0] [c00000000050da44] .btrfs_finish_chunk_alloc+0x1d4/0x620
[c0000000f600af20] [c0000000004be854] .btrfs_create_pending_block_groups+0x1d4/0x2c0
[c0000000f600b020] [c0000000004bf188] .do_chunk_alloc+0x3c8/0x420
[c0000000f600b100] [c0000000004c27cc] .find_free_extent+0xbfc/0x1030
[c0000000f600b260] [c0000000004c2ce8] .btrfs_reserve_extent+0xe8/0x250
[c0000000f600b330] [c0000000004c2f90] .btrfs_alloc_tree_block+0x140/0x590
[c0000000f600b440] [c0000000004a47b4] .__btrfs_cow_block+0x124/0x780
[c0000000f600b530] [c0000000004a4fc0] .btrfs_cow_block+0xf0/0x250
[c0000000f600b5e0] [c0000000004a917c] .btrfs_search_slot+0x22c/0xc00
[c0000000f600b720] [c00000000050aa40] .btrfs_remove_chunk+0x1b0/0x9f0
[c0000000f600b850] [c0000000004c4e04] .btrfs_delete_unused_bgs+0x434/0x570
[c0000000f600b950] [c0000000004d3cb8] .close_ctree+0x2e8/0x3b0
[c0000000f600ba20] [c00000000049d178] .btrfs_put_super+0x18/0x30
[c0000000f600ba90] [c000000000243cd4] .generic_shutdown_super+0xa4/0x1a0
[c0000000f600bb10] [c0000000002441d8] .kill_anon_super+0x18/0x30
[c0000000f600bb90] [c00000000049c898] .btrfs_kill_super+0x18/0xc0
[c0000000f600bc10] [c0000000002444f8] .deactivate_locked_super+0x98/0xe0
[c0000000f600bc90] [c000000000269f94] .cleanup_mnt+0x54/0xa0
[c0000000f600bd10] [c0000000000bd744] .task_work_run+0xc4/0x100
[c0000000f600bdb0] [c000000000016334] .do_notify_resume+0x74/0x80
[c0000000f600be30] [c0000000000098b8] .ret_from_except_lite+0x64/0x68
Instruction dump:
fba1ffe8 fbc1fff0 fbe1fff8 7c791b78 f8010010 f821ff21 e94d0290 81030040
812a04e8 7d094a78 7d290034 5529d97e <0b090000> 3b400000 3be30050 3bc3004c
The above call trace is seen even on x86_64; albeit very rarely and that too
with nodesize set to 64k and with nospace_cache mount option being used.
The reason for the above call trace is,
btrfs_remove_chunk
check_system_chunk
Allocate chunk if required
For each physical stripe on underlying device,
btrfs_free_dev_extent
...
Take lock on Device tree's root node
btrfs_cow_block("dev tree's root node");
btrfs_reserve_extent
find_free_extent
index = BTRFS_RAID_DUP;
have_caching_bg = false;
When in LOOP_CACHING_NOWAIT state, Assume we find a block group
which is being cached; Hence have_caching_bg is set to true
When repeating the search for the next RAID index, we set
have_caching_bg to false.
Hence right after completing the LOOP_CACHING_NOWAIT state, we incorrectly
skip LOOP_CACHING_WAIT state and move to LOOP_ALLOC_CHUNK state where we
allocate a chunk and try to add entries corresponding to the chunk's physical
stripe into the device tree. When doing so the task deadlocks itself waiting
for the blocking lock on the root node of the device tree.
This commit fixes the issue by introducing a new local variable to help
indicate as to whether a block group of any RAID type is being cached.
Signed-off-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
Even with quota disabled, generic/127 will trigger a kernel warning by
underflow data space info.
The bug is caused by buffered write, which in case of short copy, the
start parameter for btrfs_delalloc_release_space() is wrong, and
round_up/down() in btrfs_delalloc_release() extents the range to page
aligned, decreasing one more page than expected.
This patch will fix it by passing correct start.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
When rebasing my patchset, I forgot to pick up a cleanup patch to remove
old hotfix in 4.2 release.
Witouth the cleanup, it will screw up new qgroup reserve framework and
always cause minus reserved number.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
Between btrfs_allocerved_file_extent() and
btrfs_add_delayed_qgroup_reserve(), there is a window that delayed_refs
are run and delayed ref head maybe freed before
btrfs_add_delayed_qgroup_reserve().
This will cause btrfs_dad_delayed_qgroup_reserve() to return -ENOENT,
and cause transaction to be aborted.
This patch will record qgroup reserve space info into delayed_ref_head
at btrfs_add_delayed_ref(), to eliminate the race window.
Reported-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
cleaner_kthread() kthread calls try_to_freeze() at the beginning of every
cleanup attempt. This operation can't ever succeed though, as the kthread
hasn't marked itself as freezable.
Before (hopefully eventually) kthread freezing gets converted to fileystem
freezing, we'd rather mark cleaner_kthread() freezable (as my
understanding is that it can generate filesystem I/O during suspend).
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
Ancient qgroup code call memcpy() on a extent buffer and use it for leaf
iteration.
As extent buffer contains lock, pointers to pages, it's never sane to do
such copy.
The following bug may be caused by this insane operation:
[92098.841309] general protection fault: 0000 [#1] SMP
[92098.841338] Modules linked in: ...
[92098.841814] CPU: 1 PID: 24655 Comm: kworker/u4:12 Not tainted
4.3.0-rc1 #1
[92098.841868] Workqueue: btrfs-qgroup-rescan btrfs_qgroup_rescan_helper
[btrfs]
[92098.842261] Call Trace:
[92098.842277] [<ffffffffc035a5d8>] ? read_extent_buffer+0xb8/0x110
[btrfs]
[92098.842304] [<ffffffffc0396d00>] ? btrfs_find_all_roots+0x60/0x70
[btrfs]
[92098.842329] [<ffffffffc039af3d>]
btrfs_qgroup_rescan_worker+0x28d/0x5a0 [btrfs]
Where btrfs_qgroup_rescan_worker+0x28d is btrfs_disk_key_to_cpu(),
called in reading key from the copied extent_buffer.
This patch will use btrfs_clone_extent_buffer() to a better copy of
extent buffer to deal such case.
Reported-by: Stephane Lesimple <stephane_btrfs@lesimple.fr>
Suggested-by: Filipe Manana <fdmanana@kernel.org>
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
Enable the extended 'limit' syntax (a range), the new 'stripes' and
extended 'usage' syntax (a range) filters in the filters mask. The patch
comes separate and not within the series that introduced the new filters
because the patch adding the mask was merged in a late rc. The
integration branch was based on an older rc and could not merge the
patch due to the missing changes.
Prerequisities:
* btrfs: check unsupported filters in balance arguments
* btrfs: extend balance filter limit to take minimum and maximum
* btrfs: add balance filter for stripes
* btrfs: extend balance filter usage to take minimum and maximum
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
Similar to the 'limit' filter, we can enhance the 'usage' filter to
accept a range. The change is backward compatible, the range is applied
only in connection with the BTRFS_BALANCE_ARGS_USAGE_RANGE flag.
We don't have a usecase yet, the current syntax has been sufficient. The
enhancement should provide parity with other range-like filters.
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
Balance block groups which have the given number of stripes, defined by
a range min..max. This is useful to selectively rebalance only chunks
that do not span enough devices, applies to RAID0/10/5/6.
Signed-off-by: Gabríel Arthúr Pétursson <gabriel@system.is>
[ renamed bargs members, added to the UAPI, wrote the changelog ]
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
The 'limit' filter is underdesigned, it should have been a range for
[min,max], with some relaxed semantics when one of the bounds is
missing. Besides that, using a full u64 for a single value is a waste of
bytes.
Let's fix both by extending the use of the u64 bytes for the [min,max]
range. This can be done in a backward compatible way, the range will be
interpreted only if the appropriate flag is set
(BTRFS_BALANCE_ARGS_LIMIT_RANGE).
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
The code for btrfs inode-resolve has never worked properly for
files with enough hard links to trigger extrefs. It was trying to
get the leaf out of a path after freeing the path:
btrfs_release_path(path);
leaf = path->nodes[0];
item_size = btrfs_item_size_nr(leaf, slot);
The fix here is to use the extent buffer we cloned just a little higher
up to avoid deadlocks caused by using the leaf in the path.
Signed-off-by: Chris Mason <clm@fb.com>
cc: stable@vger.kernel.org # v3.7+
cc: Mark Fasheh <mfasheh@suse.de>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Mark Fasheh <mfasheh@suse.de>
Signed-off-by: Chris Mason <clm@fb.com>
We don't verify that all the balance filter arguments supplemented by
the flags are actually known to the kernel. Thus we let it silently pass
and do nothing.
At the moment this means only the 'limit' filter, but we're going to add
a few more soon so it's better to have that fixed. Also in older stable
kernels so that it works with newer userspace tools.
Cc: stable@vger.kernel.org # 3.16+
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
In the kernel 4.2 merge window we had a big changes to the implementation
of delayed references and qgroups which made the no_quota field of delayed
references not used anymore. More specifically the no_quota field is not
used anymore as of:
commit 0ed4792af0 ("btrfs: qgroup: Switch to new extent-oriented qgroup mechanism.")
Leaving the no_quota field actually prevents delayed references from
getting merged, which in turn cause the following BUG_ON(), at
fs/btrfs/extent-tree.c, to be hit when qgroups are enabled:
static int run_delayed_tree_ref(...)
{
(...)
BUG_ON(node->ref_mod != 1);
(...)
}
This happens on a scenario like the following:
1) Ref1 bytenr X, action = BTRFS_ADD_DELAYED_REF, no_quota = 1, added.
2) Ref2 bytenr X, action = BTRFS_DROP_DELAYED_REF, no_quota = 0, added.
It's not merged with Ref1 because Ref1->no_quota != Ref2->no_quota.
3) Ref3 bytenr X, action = BTRFS_ADD_DELAYED_REF, no_quota = 1, added.
It's not merged with the reference at the tail of the list of refs
for bytenr X because the reference at the tail, Ref2 is incompatible
due to Ref2->no_quota != Ref3->no_quota.
4) Ref4 bytenr X, action = BTRFS_DROP_DELAYED_REF, no_quota = 0, added.
It's not merged with the reference at the tail of the list of refs
for bytenr X because the reference at the tail, Ref3 is incompatible
due to Ref3->no_quota != Ref4->no_quota.
5) We run delayed references, trigger merging of delayed references,
through __btrfs_run_delayed_refs() -> btrfs_merge_delayed_refs().
6) Ref1 and Ref3 are merged as Ref1->no_quota = Ref3->no_quota and
all other conditions are satisfied too. So Ref1 gets a ref_mod
value of 2.
7) Ref2 and Ref4 are merged as Ref2->no_quota = Ref4->no_quota and
all other conditions are satisfied too. So Ref2 gets a ref_mod
value of 2.
8) Ref1 and Ref2 aren't merged, because they have different values
for their no_quota field.
9) Delayed reference Ref1 is picked for running (select_delayed_ref()
always prefers references with an action == BTRFS_ADD_DELAYED_REF).
So run_delayed_tree_ref() is called for Ref1 which triggers the
BUG_ON because Ref1->red_mod != 1 (equals 2).
So fix this by removing the no_quota field, as it's not used anymore as
of commit 0ed4792af0 ("btrfs: qgroup: Switch to new extent-oriented
qgroup mechanism.").
The use of no_quota was also buggy in at least two places:
1) At delayed-refs.c:btrfs_add_delayed_tree_ref() - we were setting
no_quota to 0 instead of 1 when the following condition was true:
is_fstree(ref_root) || !fs_info->quota_enabled
2) At extent-tree.c:__btrfs_inc_extent_ref() - we were attempting to
reset a node's no_quota when the condition "!is_fstree(root_objectid)
|| !root->fs_info->quota_enabled" was true but we did it only in
an unused local stack variable, that is, we never reset the no_quota
value in the node itself.
This fixes the remainder of problems several people have been having when
running delayed references, mostly while a balance is running in parallel,
on a 4.2+ kernel.
Very special thanks to Stéphane Lesimple for helping debugging this issue
and testing this fix on his multi terabyte filesystem (which took more
than one day to balance alone, plus fsck, etc).
Also, this fixes deadlock issue when using the clone ioctl with qgroups
enabled, as reported by Elias Probst in the mailing list. The deadlock
happens because after calling btrfs_insert_empty_item we have our path
holding a write lock on a leaf of the fs/subvol tree and then before
releasing the path we called check_ref() which did backref walking, when
qgroups are enabled, and tried to read lock the same leaf. The trace for
this case is the following:
INFO: task systemd-nspawn:6095 blocked for more than 120 seconds.
(...)
Call Trace:
[<ffffffff86999201>] schedule+0x74/0x83
[<ffffffff863ef64c>] btrfs_tree_read_lock+0xc0/0xea
[<ffffffff86137ed7>] ? wait_woken+0x74/0x74
[<ffffffff8639f0a7>] btrfs_search_old_slot+0x51a/0x810
[<ffffffff863a129b>] btrfs_next_old_leaf+0xdf/0x3ce
[<ffffffff86413a00>] ? ulist_add_merge+0x1b/0x127
[<ffffffff86411688>] __resolve_indirect_refs+0x62a/0x667
[<ffffffff863ef546>] ? btrfs_clear_lock_blocking_rw+0x78/0xbe
[<ffffffff864122d3>] find_parent_nodes+0xaf3/0xfc6
[<ffffffff86412838>] __btrfs_find_all_roots+0x92/0xf0
[<ffffffff864128f2>] btrfs_find_all_roots+0x45/0x65
[<ffffffff8639a75b>] ? btrfs_get_tree_mod_seq+0x2b/0x88
[<ffffffff863e852e>] check_ref+0x64/0xc4
[<ffffffff863e9e01>] btrfs_clone+0x66e/0xb5d
[<ffffffff863ea77f>] btrfs_ioctl_clone+0x48f/0x5bb
[<ffffffff86048a68>] ? native_sched_clock+0x28/0x77
[<ffffffff863ed9b0>] btrfs_ioctl+0xabc/0x25cb
(...)
The problem goes away by eleminating check_ref(), which no longer is
needed as its purpose was to get a value for the no_quota field of
a delayed reference (this patch removes the no_quota field as mentioned
earlier).
Reported-by: Stéphane Lesimple <stephane_btrfs@lesimple.fr>
Tested-by: Stéphane Lesimple <stephane_btrfs@lesimple.fr>
Reported-by: Elias Probst <mail@eliasprobst.eu>
Reported-by: Peter Becker <floyd.net@gmail.com>
Reported-by: Malte Schröder <malte@tnxip.de>
Reported-by: Derek Dongray <derek@valedon.co.uk>
Reported-by: Erkki Seppala <flux-btrfs@inside.org>
Cc: stable@vger.kernel.org # 4.2+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
In the kernel 4.2 merge window we had a refactoring/rework of the delayed
references implementation in order to fix certain problems with qgroups.
However that rework introduced one more regression that leads to the
following trace when running delayed references for metadata:
[35908.064664] kernel BUG at fs/btrfs/extent-tree.c:1832!
[35908.065201] invalid opcode: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC
[35908.065201] Modules linked in: dm_flakey dm_mod btrfs crc32c_generic xor raid6_pq nfsd auth_rpcgss oid_registry nfs_acl nfs lockd grace fscache sunrpc loop fuse parport_pc psmouse i2
[35908.065201] CPU: 14 PID: 15014 Comm: kworker/u32:9 Tainted: G W 4.3.0-rc5-btrfs-next-17+ #1
[35908.065201] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.8.1-0-g4adadbd-20150316_085822-nilsson.home.kraxel.org 04/01/2014
[35908.065201] Workqueue: btrfs-extent-refs btrfs_extent_refs_helper [btrfs]
[35908.065201] task: ffff880114b7d780 ti: ffff88010c4c8000 task.ti: ffff88010c4c8000
[35908.065201] RIP: 0010:[<ffffffffa04928b5>] [<ffffffffa04928b5>] insert_inline_extent_backref+0x52/0xb1 [btrfs]
[35908.065201] RSP: 0018:ffff88010c4cbb08 EFLAGS: 00010293
[35908.065201] RAX: 0000000000000000 RBX: ffff88008a661000 RCX: 0000000000000000
[35908.065201] RDX: ffffffffa04dd58f RSI: 0000000000000001 RDI: 0000000000000000
[35908.065201] RBP: ffff88010c4cbb40 R08: 0000000000001000 R09: ffff88010c4cb9f8
[35908.065201] R10: 0000000000000000 R11: 000000000000002c R12: 0000000000000000
[35908.065201] R13: ffff88020a74c578 R14: 0000000000000000 R15: 0000000000000000
[35908.065201] FS: 0000000000000000(0000) GS:ffff88023edc0000(0000) knlGS:0000000000000000
[35908.065201] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[35908.065201] CR2: 00000000015e8708 CR3: 0000000102185000 CR4: 00000000000006e0
[35908.065201] Stack:
[35908.065201] ffff88010c4cbb18 0000000000000f37 ffff88020a74c578 ffff88015a408000
[35908.065201] ffff880154a44000 0000000000000000 0000000000000005 ffff88010c4cbbd8
[35908.065201] ffffffffa0492b9a 0000000000000005 0000000000000000 0000000000000000
[35908.065201] Call Trace:
[35908.065201] [<ffffffffa0492b9a>] __btrfs_inc_extent_ref+0x8b/0x208 [btrfs]
[35908.065201] [<ffffffffa0497117>] ? __btrfs_run_delayed_refs+0x4d4/0xd33 [btrfs]
[35908.065201] [<ffffffffa049773d>] __btrfs_run_delayed_refs+0xafa/0xd33 [btrfs]
[35908.065201] [<ffffffffa04a976a>] ? join_transaction.isra.10+0x25/0x41f [btrfs]
[35908.065201] [<ffffffffa04a97ed>] ? join_transaction.isra.10+0xa8/0x41f [btrfs]
[35908.065201] [<ffffffffa049914d>] btrfs_run_delayed_refs+0x75/0x1dd [btrfs]
[35908.065201] [<ffffffffa04992f1>] delayed_ref_async_start+0x3c/0x7b [btrfs]
[35908.065201] [<ffffffffa04d4b4f>] normal_work_helper+0x14c/0x32a [btrfs]
[35908.065201] [<ffffffffa04d4e93>] btrfs_extent_refs_helper+0x12/0x14 [btrfs]
[35908.065201] [<ffffffff81063b23>] process_one_work+0x24a/0x4ac
[35908.065201] [<ffffffff81064285>] worker_thread+0x206/0x2c2
[35908.065201] [<ffffffff8106407f>] ? rescuer_thread+0x2cb/0x2cb
[35908.065201] [<ffffffff8106407f>] ? rescuer_thread+0x2cb/0x2cb
[35908.065201] [<ffffffff8106904d>] kthread+0xef/0xf7
[35908.065201] [<ffffffff81068f5e>] ? kthread_parkme+0x24/0x24
[35908.065201] [<ffffffff8147d10f>] ret_from_fork+0x3f/0x70
[35908.065201] [<ffffffff81068f5e>] ? kthread_parkme+0x24/0x24
[35908.065201] Code: 6a 01 41 56 41 54 ff 75 10 41 51 4d 89 c1 49 89 c8 48 8d 4d d0 e8 f6 f1 ff ff 48 83 c4 28 85 c0 75 2c 49 81 fc ff 00 00 00 77 02 <0f> 0b 4c 8b 45 30 8b 4d 28 45 31
[35908.065201] RIP [<ffffffffa04928b5>] insert_inline_extent_backref+0x52/0xb1 [btrfs]
[35908.065201] RSP <ffff88010c4cbb08>
[35908.310885] ---[ end trace fe4299baf0666457 ]---
This happens because the new delayed references code no longer merges
delayed references that have different sequence values. The following
steps are an example sequence leading to this issue:
1) Transaction N starts, fs_info->tree_mod_seq has value 0;
2) Extent buffer (btree node) A is allocated, delayed reference Ref1 for
bytenr A is created, with a value of 1 and a seq value of 0;
3) fs_info->tree_mod_seq is incremented to 1;
4) Extent buffer A is deleted through btrfs_del_items(), which calls
btrfs_del_leaf(), which in turn calls btrfs_free_tree_block(). The
later returns the metadata extent associated to extent buffer A to
the free space cache (the range is not pinned), because the extent
buffer was created in the current transaction (N) and writeback never
happened for the extent buffer (flag BTRFS_HEADER_FLAG_WRITTEN not set
in the extent buffer).
This creates the delayed reference Ref2 for bytenr A, with a value
of -1 and a seq value of 1;
5) Delayed reference Ref2 is not merged with Ref1 when we create it,
because they have different sequence numbers (decided at
add_delayed_ref_tail_merge());
6) fs_info->tree_mod_seq is incremented to 2;
7) Some task attempts to allocate a new extent buffer (done at
extent-tree.c:find_free_extent()), but due to heavy fragmentation
and running low on metadata space the clustered allocation fails
and we fall back to unclustered allocation, which finds the
extent at offset A, so a new extent buffer at offset A is allocated.
This creates delayed reference Ref3 for bytenr A, with a value of 1
and a seq value of 2;
8) Ref3 is not merged neither with Ref2 nor Ref1, again because they
all have different seq values;
9) We start running the delayed references (__btrfs_run_delayed_refs());
10) The delayed Ref1 is the first one being applied, which ends up
creating an inline extent backref in the extent tree;
10) Next the delayed reference Ref3 is selected for execution, and not
Ref2, because select_delayed_ref() always gives a preference for
positive references (that have an action of BTRFS_ADD_DELAYED_REF);
11) When running Ref3 we encounter alreay the inline extent backref
in the extent tree at insert_inline_extent_backref(), which makes
us hit the following BUG_ON:
BUG_ON(owner < BTRFS_FIRST_FREE_OBJECTID);
This is always true because owner corresponds to the level of the
extent buffer/btree node in the btree.
For the scenario described above we hit the BUG_ON because we never merge
references that have different seq values.
We used to do the merging before the 4.2 kernel, more specifically, before
the commmits:
c6fc245499 ("btrfs: delayed-ref: Use list to replace the ref_root in ref_head.")
c43d160fcd ("btrfs: delayed-ref: Cleanup the unneeded functions.")
This issue became more exposed after the following change that was added
to 4.2 as well:
cffc3374e5 ("Btrfs: fix order by which delayed references are run")
Which in turn fixed another regression by the two commits previously
mentioned.
So fix this by bringing back the delayed reference merge code, with the
proper adaptations so that it operates against the new data structure
(linked list vs old red black tree implementation).
This issue was hit running fstest btrfs/063 in a loop. Several people have
reported this issue in the mailing list when running on kernels 4.2+.
Very special thanks to Stéphane Lesimple for helping debugging this issue
and testing this fix on his multi terabyte filesystem (which took more
than one day to balance alone, plus fsck, etc).
Fixes: c6fc245499 ("btrfs: delayed-ref: Use list to replace the ref_root in ref_head.")
Reported-by: Peter Becker <floyd.net@gmail.com>
Reported-by: Stéphane Lesimple <stephane_btrfs@lesimple.fr>
Tested-by: Stéphane Lesimple <stephane_btrfs@lesimple.fr>
Reported-by: Malte Schröder <malte@tnxip.de>
Reported-by: Derek Dongray <derek@valedon.co.uk>
Reported-by: Erkki Seppala <flux-btrfs@inside.org>
Cc: stable@vger.kernel.org # 4.2+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Pull btrfs fixes from Chris Mason:
"I have two more small fixes this week:
Qu's fix avoids unneeded COW during fallocate, and Christian found a
memory leak in the error handling of an earlier fix"
* 'for-linus-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
btrfs: fix possible leak in btrfs_ioctl_balance()
btrfs: Avoid truncate tailing page if fallocate range doesn't exceed inode size
When we make ctl->unit allocations from a bitmap there is no point in searching
for the next 0 in the bitmap. If we've found a bit we're done and can just exit
the loop. Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
We can waste a lot of time searching through bitmaps when we are heavily
fragmented trying to find large contiguous areas that don't exist in the bitmap.
So keep track of the max extent size when we do a full search of a bitmap so
that next time around we can just skip the expensive searching if our max size
is less than what we are looking for. Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
If we are extremely fragmented then we won't be able to create a free_cluster.
So if this happens set last_ptr->fragmented so that all future allcations will
give up trying to create a cluster. When we unpin extents we will unset
->fragmented if we free up a sufficient amount of space in a block group.
Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
We try really really hard to make allocations, but sometimes it is just not
going to happen, especially when free space is extremely fragmented. So add a
few short cuts through the looping states. For example if we couldn't allocate
a chunk, just go straight to the NO_EMPTY_SIZE loop. If there are no uncached
block groups and we've done a full search, go straight to the ALLOC_CHUNK stage.
And finally if we already have empty_size and empty_cluster set to 0 go ahead
and return -ENOSPC. Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
If we hit ENOSPC when setting up a space cache don't bother setting up any of
the other space cache's in this transaction, it'll just induce unnecessary
latency. Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
When we are heavily fragmented we can induce a lot of latency trying to make an
allocation happen that is simply not going to happen. Thankfully we keep track
of our max_extent_size when going through the allocator, so if we get to the
point where we are exiting find_free_extent with ENOSPC then set our
space_info->max_extent_size so we can keep future allocations from having to pay
this cost. We reset the max_extent_size whenever we release pinned bytes back
into this space info so we can redo all the work. Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
The space cache needs to have contiguous allocations, and the allocator tries to
make allocations by reducing the amount of bytes requested and re-searching.
But this just makes us waste time when we are very fragmented, so if we can't
find our space just exit, don't bother trying to search again. Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
I want to set some per transaction flags, so instead of adding yet another int
lets just convert the current two int indicators to flags and add a flags field
for future use. Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
If we are heavily fragmented we will continually try to prealloc the largest
extent size we can every time we call btrfs_reserve_extent. This can be very
expensive when we are heavily fragmented, burning lots of CPU cycles and loops
through the allocator. So instead notice when we get a smaller chunk from the
allocator than what we specified and use this as the new maximum size we try to
allocate. Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
In tracking down these weird bitmap problems it was helpful to artificially
create an extremely fragmented file system. These mount options let us either
fragment data or metadata or both. With these options I could reproduce all
sorts of weird latencies and hangs that occur under extreme fragmentation and
get them fixed. Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
With my changes to allow us to find old roots when resolving indirect refs I
introduced a regression to the sanity tests. Since we don't really care to go
down into the fs roots we just need to have the old behavior of returning ENOENT
for dummy roots for the sanity tests. In the future if we want to get fancy we
can populate the test fs trees with the references as well. Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
We have a mechanism to make sure we don't lose updates for ordered extents that
were logged in the transaction that is currently running. We add the ordered
extent to a transaction list and then the transaction waits on all the ordered
extents in that list. However are substantially large file systems this list
can be extremely large, and can give us soft lockups, since the ordered extents
don't remove themselves from the list when they do complete.
To fix this we simply add a counter to the transaction that is incremented any
time we have a logged extent that needs to be completed in the current
transaction. Then when the ordered extent finally completes it decrements the
per transaction counter and wakes up the transaction if we are the last ones.
This will eliminate the softlockup. Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
Add check at btrfs_destroy_inode() time to detect qgroup reserved space
leak.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
In clear_bit_hook, qgroup reserved data is already handled quite well,
either released by finish_ordered_io or invalidatepage.
So calling btrfs_qgroup_free_data() here is completely meaningless, and
since btrfs_qgroup_free_data() will lock io_tree, so it can't be called
with io_tree lock hold.
This patch will add a new function
btrfs_free_reserved_data_space_noquota() for clear_bit_hook() to cease
the lockdep warning.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
Now fallocate will do accurate qgroup reserve space check, unlike old
method, which will always reserve the whole length of the range.
With this patch, fallocate will:
1) Iterate the desired range and mark in data rsv map
Only range which is going to be allocated will be recorded in data
rsv map and reserve the space.
For already allocated range (normal/prealloc extent) they will be
skipped.
Also, record the marked range into a new list for later use.
2) If 1) succeeded, do real file extent allocate.
And at file extent allocation time, corresponding range will be
removed from the range in data rsv map.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
Now each qgroup reserve for data will has its ftrace event for better
debugging.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
For btrfs_invalidatepage() and its variant evict_inode_truncate_page(),
there will be pages don't reach disk.
In that case, their reserved space won't be release nor freed by
finish_ordered_io() nor delayed_ref handler.
So we must free their qgroup reserved space, or we will leaking reserved
space again.
So this will patch will call btrfs_qgroup_free_data() for
invalidatepage() and its variant evict_inode_truncate_page().
And due to the nature of new btrfs_qgroup_reserve/free_data() reserved
space will only be reserved or freed once, so for pages which are
already flushed to disk, their reserved space will be released and freed
by delayed_ref handler.
Double free won't be a problem.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
For NOCOW and inline case, there will be no delayed_ref created for
them, so we should free their reserved data space at proper
time(finish_ordered_io for NOCOW and cow_file_inline for inline).
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
Cleanup the old facilities which use old btrfs_qgroup_reserve() function
call, replace them with the newer version, and remove the "__" prefix in
them.
Also, make btrfs_qgroup_reserve/free() functions private, as they are
now only used inside qgroup codes.
Now, the whole btrfs qgroup is swithed to use the new reserve facilities.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
Use new __btrfs_delalloc_reserve_space() and
__btrfs_delalloc_release_space() to reserve and release space for
delalloc.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
Add new version of btrfs_delalloc_reserve_space() and
btrfs_delalloc_release_space() functions, which supports accurate qgroup
reserve.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
Use new reserve/free for buffered write and inode cache.
For buffered write case, as nodatacow write won't increase quota account,
so unlike old behavior which does reserve before check nocow, now we
check nocow first and then only reserve data if we can't do nocow write.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
Add new functions __btrfs_check_data_free_space() and
__btrfs_free_reserved_data_space() to work with new accurate qgroup
reserved space framework.
The new function will replace old btrfs_check_data_free_space() and
btrfs_free_reserved_data_space() respectively, but until all the change
is done, let's just use the new name.
Also, export internal use function btrfs_alloc_data_chunk_ondemand(), as
now qgroup reserve requires precious bytes, some operation can't get the
accurate number in advance(like fallocate).
But data space info check and data chunk allocate doesn't need to be
that accurate, and can be called at the beginning.
So export it for later operations.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
As we have the new metadata reservation functions, use them to replace
the old btrfs_qgroup_reserve() call for metadata.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
Qgroup reserved space needs to be released from inode dirty map and get
freed at different timing:
1) Release when the metadata is written into tree
After corresponding metadata is written into tree, any newer write will
be COWed(don't include NOCOW case yet).
So we must release its range from inode dirty range map, or we will
forget to reserve needed range, causing accounting exceeding the limit.
2) Free reserved bytes when delayed ref is run
When delayed refs are run, qgroup accounting will follow soon and turn
the reserved bytes into rfer/excl numbers.
As run_delayed_refs and qgroup accounting are all done at
commit_transaction() time, we are safe to free reserved space in
run_delayed_ref time().
With these timing to release/free reserved space, we should be able to
resolve the long existing qgroup reserve space leak problem.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
Add new function btrfs_add_delayed_qgroup_reserve() function to record
how much space is reserved for that extent.
As btrfs only accounts qgroup at run_delayed_refs() time, so newly
allocated extent should keep the reserved space until then.
So add needed function with related members to do it.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
space
Introduce functions btrfs_qgroup_release/free_data() to release/free
reserved data range.
Release means, just remove the data range from io_tree, but doesn't
free the reserved space.
This is for normal buffered write case, when data is written into disc
and its metadata is added into tree, its reserved space should still be
kept until commit_trans().
So in that case, we only release dirty range, but keep the reserved
space recorded some other place until commit_tran().
Free means not only remove data range, but also free reserved space.
This is used for case for cleanup and invalidate page.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
Introduce a new function, btrfs_qgroup_reserve_data(), which will use
io_tree to accurate qgroup reserve, to avoid reserved space leaking.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
Introduce new function clear_record_extent_bits(), which will clear bits
for given range and record the details about which ranges are cleared
and how many bytes in total it changes.
This provides the basis for later qgroup reserve codes.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
Introduce new function set_record_extent_bits(), which will not only set
given bits, but also record how many bytes are changed, and detailed
range info.
This is quite important for later qgroup reserve framework.
The number of bytes will be used to do qgroup reserve, and detailed
range info will be used to cleanup for EQUOT case.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
Add a new structure, extent_change_set, to record how many bytes are
changed in one set/clear_extent_bits() operation, with detailed changed
ranges info.
This provides the needed facilities for later qgroup reserve framework.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
Commit 8eb934591f ("btrfs: check unsupported filters in balance
arguments") adds a jump to exit label out_bargs in case the argument
check fails. At this point in addition to the bargs memory, the
memory for struct btrfs_balance_control has already been allocated.
Ownership of bctl is passed to btrfs_balance() in the good case,
thus the memory is not freed due to the introduced jump. Make sure
that the memory gets freed in any case as necessary. Detected by
Coverity CID 1328378.
Signed-off-by: Christian Engelmayer <cengelma@gmx.at>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
reada is using -1 instead of the -ENOMEM defined macro to specify that
a buffer allocation failed. Since the error number is propagated, the
caller will get a -EPERM which is the wrong error condition.
Also, updating the caller to return the exact value from
reada_add_block.
Smatch tool warning:
reada_add_block() warn: returning -1 instead of -ENOMEM is sloppy
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: Luis de Bethencourt <luisbg@osg.samsung.com>
Signed-off-by: David Sterba <dsterba@suse.com>
check-integrity is using -1 instead of the -ENOMEM defined macro to
specify that a buffer allocation failed. Since the error number is
propagated, the caller will get a -EPERM which is the wrong error
condition.
Also, the smatch tool complains with the following warnings:
btrfsic_process_superblock() warn: returning -1 instead of -ENOMEM is sloppy
btrfsic_read_block() warn: returning -1 instead of -ENOMEM is sloppy
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: Luis de Bethencourt <luisbg@osg.samsung.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Below variables are defined per compress type.
- struct list_head comp_idle_workspace[BTRFS_COMPRESS_TYPES]
- spinlock_t comp_workspace_lock[BTRFS_COMPRESS_TYPES]
- int comp_num_workspace[BTRFS_COMPRESS_TYPES]
- atomic_t comp_alloc_workspace[BTRFS_COMPRESS_TYPES]
- wait_queue_head_t comp_workspace_wait[BTRFS_COMPRESS_TYPES]
BTW, while accessing one compress type of these variables, the next or
before address is other compress types of it.
So this patch puts these variables in a struct to make cache friendly.
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: Byongho Lee <bhlee.kernel@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This patch eliminates the last item of prop_handlers array which is used
to check end of array and instead uses ARRAY_SIZE macro.
Though this is a very tiny optimization, using ARRAY_SIZE macro is a
good practice to iterate array.
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: Byongho Lee <bhlee.kernel@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Just fix a typo in the code comment.
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: Geliang Tang <geliangtang@163.com>
Signed-off-by: David Sterba <dsterba@suse.com>
rsv_count ultimately gets passed to start_transaction() which
now takes an unsigned int as its num_items parameter.
The value of rsv_count should always be positive so declare it
as being unsigned.
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: Alexandru Moise <00moses.alexander00@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The value of num_items that start_transaction() ultimately
always takes is a small one, so a 64 bit integer is overkill.
Also change num_items for btrfs_start_transaction() and
btrfs_start_transaction_lflush() as well.
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: Alexandru Moise <00moses.alexander00@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Improve readability by generalizing the profile validity checks.
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: Alexandru Moise <00moses.alexander00@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The commit b37392ea86 ("Btrfs: cleanup unnecessary parameter
and variant of prepare_pages()") makes it redundant.
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: Shan Hai <haishan.bai@hotmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_raid_array[] holds attributes of all raid types.
Use btrfs_raid_array[].devs_min is best way for request
in btrfs_reduce_alloc_profile(), instead of use complex
condition of each raid types.
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_raid_array[] is used to define all raid attributes, use it
to get tolerated_failures in btrfs_get_num_tolerated_disk_barrier_failures(),
instead of complex condition in function.
It can make code simple and auto-support other possible raid-type in
future.
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This array is used to record attributes of each raid type,
make it public, and many functions will benifit with this array.
For example, num_tolerated_disk_barrier_failures(), we can
avoid complex conditions in this function, and get raid attribute
simply by accessing above array.
It can also make code logic simple, reduce duplication code, and
increase maintainability.
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Rather than have three separate if() statements for the same outcome
we should just OR them together in the same if() statement.
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: Alexandru Moise <00moses.alexander00@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Use memset() to null out the btrfs_delayed_ref_root of
btrfs_transaction instead of setting all the members to 0 by hand.
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: Alexandru Moise <00moses.alexander00@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We can safely iterate whole list items, without using list_del macro.
So remove the list_del call.
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: Byongho Lee <bhlee.kernel@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There is no removing list element while iterating over list.
So, replace list_for_each_entry_safe to list_for_each_entry.
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: Byongho Lee <bhlee.kernel@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Just call kmem_cache_zalloc() instead of calling kmem_cache_alloc().
We're just initializing most fields to 0, false and NULL later on
_anyway_, so to make the code mode readable and potentially gain
a bit of performance (completely untested claim), we should fill our
btrfs_trans_handle with zeros on allocation then just initialize
those five remaining fields (not counting the list_heads) as normal.
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: Alexandru Moise <00moses.alexander00@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
old_len is used to store the return value of btrfs_item_size_nr().
The return value of btrfs_item_size_nr() is of type u32.
To improve code correctness and avoid mixing signed and unsigned
integers I've changed old_len to be of type u32 as well.
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: Alexandru Moise <00moses.alexander00@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The return values of btrfs_item_offset_nr and btrfs_item_size_nr are of
type u32. To avoid mixing signed and unsigned integers we should also
declare dsize and last_off to be of type u32.
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: Alexandru Moise <00moses.alexander00@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Current code will always truncate tailing page if its alloc_start is
smaller than inode size.
For example, the file extent layout is like:
0 4K 8K 16K 32K
|<-----Extent A---------------->|
|<--Inode size: 18K---------->|
But if calling fallocate even for range [0,4K), it will cause btrfs to
re-truncate the range [16,32K), causing COW and a new extent.
0 4K 8K 16K 32K
|///////| <- Fallocate call range
|<-----Extent A-------->|<--B-->|
The cause is quite easy, just a careless btrfs_truncate_inode() in a
else branch without extra judgment.
Fix it by add judgment on whether the fallocate range is beyond isize.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
When truncating a file to a smaller size which consists of an inline
extent that is compressed, we did not discard (or made unusable) the
data between the new file size and the old file size, wasting metadata
space and allowing for the truncated data to be leaked and the data
corruption/loss mentioned below.
We were also not correctly decrementing the number of bytes used by the
inode, we were setting it to zero, giving a wrong report for callers of
the stat(2) syscall. The fsck tool also reported an error about a mismatch
between the nbytes of the file versus the real space used by the file.
Now because we weren't discarding the truncated region of the file, it
was possible for a caller of the clone ioctl to actually read the data
that was truncated, allowing for a security breach without requiring root
access to the system, using only standard filesystem operations. The
scenario is the following:
1) User A creates a file which consists of an inline and compressed
extent with a size of 2000 bytes - the file is not accessible to
any other users (no read, write or execution permission for anyone
else);
2) The user truncates the file to a size of 1000 bytes;
3) User A makes the file world readable;
4) User B creates a file consisting of an inline extent of 2000 bytes;
5) User B issues a clone operation from user A's file into its own
file (using a length argument of 0, clone the whole range);
6) User B now gets to see the 1000 bytes that user A truncated from
its file before it made its file world readbale. User B also lost
the bytes in the range [1000, 2000[ bytes from its own file, but
that might be ok if his/her intention was reading stale data from
user A that was never supposed to be public.
Note that this contrasts with the case where we truncate a file from 2000
bytes to 1000 bytes and then truncate it back from 1000 to 2000 bytes. In
this case reading any byte from the range [1000, 2000[ will return a value
of 0x00, instead of the original data.
This problem exists since the clone ioctl was added and happens both with
and without my recent data loss and file corruption fixes for the clone
ioctl (patch "Btrfs: fix file corruption and data loss after cloning
inline extents").
So fix this by truncating the compressed inline extents as we do for the
non-compressed case, which involves decompressing, if the data isn't already
in the page cache, compressing the truncated version of the extent, writing
the compressed content into the inline extent and then truncate it.
The following test case for fstests reproduces the problem. In order for
the test to pass both this fix and my previous fix for the clone ioctl
that forbids cloning a smaller inline extent into a larger one,
which is titled "Btrfs: fix file corruption and data loss after cloning
inline extents", are needed. Without that other fix the test fails in a
different way that does not leak the truncated data, instead part of
destination file gets replaced with zeroes (because the destination file
has a larger inline extent than the source).
seq=`basename $0`
seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
tmp=/tmp/$$
status=1 # failure is the default!
trap "_cleanup; exit \$status" 0 1 2 3 15
_cleanup()
{
rm -f $tmp.*
}
# get standard environment, filters and checks
. ./common/rc
. ./common/filter
# real QA test starts here
_need_to_be_root
_supported_fs btrfs
_supported_os Linux
_require_scratch
_require_cloner
rm -f $seqres.full
_scratch_mkfs >>$seqres.full 2>&1
_scratch_mount "-o compress"
# Create our test files. File foo is going to be the source of a clone operation
# and consists of a single inline extent with an uncompressed size of 512 bytes,
# while file bar consists of a single inline extent with an uncompressed size of
# 256 bytes. For our test's purpose, it's important that file bar has an inline
# extent with a size smaller than foo's inline extent.
$XFS_IO_PROG -f -c "pwrite -S 0xa1 0 128" \
-c "pwrite -S 0x2a 128 384" \
$SCRATCH_MNT/foo | _filter_xfs_io
$XFS_IO_PROG -f -c "pwrite -S 0xbb 0 256" $SCRATCH_MNT/bar | _filter_xfs_io
# Now durably persist all metadata and data. We do this to make sure that we get
# on disk an inline extent with a size of 512 bytes for file foo.
sync
# Now truncate our file foo to a smaller size. Because it consists of a
# compressed and inline extent, btrfs did not shrink the inline extent to the
# new size (if the extent was not compressed, btrfs would shrink it to 128
# bytes), it only updates the inode's i_size to 128 bytes.
$XFS_IO_PROG -c "truncate 128" $SCRATCH_MNT/foo
# Now clone foo's inline extent into bar.
# This clone operation should fail with errno EOPNOTSUPP because the source
# file consists only of an inline extent and the file's size is smaller than
# the inline extent of the destination (128 bytes < 256 bytes). However the
# clone ioctl was not prepared to deal with a file that has a size smaller
# than the size of its inline extent (something that happens only for compressed
# inline extents), resulting in copying the full inline extent from the source
# file into the destination file.
#
# Note that btrfs' clone operation for inline extents consists of removing the
# inline extent from the destination inode and copy the inline extent from the
# source inode into the destination inode, meaning that if the destination
# inode's inline extent is larger (N bytes) than the source inode's inline
# extent (M bytes), some bytes (N - M bytes) will be lost from the destination
# file. Btrfs could copy the source inline extent's data into the destination's
# inline extent so that we would not lose any data, but that's currently not
# done due to the complexity that would be needed to deal with such cases
# (specially when one or both extents are compressed), returning EOPNOTSUPP, as
# it's normally not a very common case to clone very small files (only case
# where we get inline extents) and copying inline extents does not save any
# space (unlike for normal, non-inlined extents).
$CLONER_PROG -s 0 -d 0 -l 0 $SCRATCH_MNT/foo $SCRATCH_MNT/bar
# Now because the above clone operation used to succeed, and due to foo's inline
# extent not being shinked by the truncate operation, our file bar got the whole
# inline extent copied from foo, making us lose the last 128 bytes from bar
# which got replaced by the bytes in range [128, 256[ from foo before foo was
# truncated - in other words, data loss from bar and being able to read old and
# stale data from foo that should not be possible to read anymore through normal
# filesystem operations. Contrast with the case where we truncate a file from a
# size N to a smaller size M, truncate it back to size N and then read the range
# [M, N[, we should always get the value 0x00 for all the bytes in that range.
# We expected the clone operation to fail with errno EOPNOTSUPP and therefore
# not modify our file's bar data/metadata. So its content should be 256 bytes
# long with all bytes having the value 0xbb.
#
# Without the btrfs bug fix, the clone operation succeeded and resulted in
# leaking truncated data from foo, the bytes that belonged to its range
# [128, 256[, and losing data from bar in that same range. So reading the
# file gave us the following content:
#
# 0000000 a1 a1 a1 a1 a1 a1 a1 a1 a1 a1 a1 a1 a1 a1 a1 a1
# *
# 0000200 2a 2a 2a 2a 2a 2a 2a 2a 2a 2a 2a 2a 2a 2a 2a 2a
# *
# 0000400
echo "File bar's content after the clone operation:"
od -t x1 $SCRATCH_MNT/bar
# Also because the foo's inline extent was not shrunk by the truncate
# operation, btrfs' fsck, which is run by the fstests framework everytime a
# test completes, failed reporting the following error:
#
# root 5 inode 257 errors 400, nbytes wrong
status=0
exit
Cc: stable@vger.kernel.org
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Pull btrfs fixes from Chris Mason:
"I have two more bug fixes for btrfs.
My commit fixes a bug we hit last week at FB, a combination of lots of
hard links and an admin command to resolve inode numbers.
Dave is adding checks to make sure balance on current kernels ignores
filters it doesn't understand. The penalty for being wrong is just
doing more work (not crashing etc), but it's a good fix"
* 'for-linus-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
btrfs: fix use after free iterating extrefs
btrfs: check unsupported filters in balance arguments
If when reading a page we find a hole and our caller had already locked
the range (bio flags has the bit EXTENT_BIO_PARENT_LOCKED set), we end
up unlocking the hole's range and then later our caller unlocks it
again, which might have already been locked by some other task once
the first unlock happened.
Currently this can only happen during a call to the extent_same ioctl,
as it's the only caller of __do_readpage() that sets the bit
EXTENT_BIO_PARENT_LOCKED for bio flags.
Fix this by leaving the unlock exclusively to the caller.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Currently the clone ioctl allows to clone an inline extent from one file
to another that already has other (non-inlined) extents. This is a problem
because btrfs is not designed to deal with files having inline and regular
extents, if a file has an inline extent then it must be the only extent
in the file and must start at file offset 0. Having a file with an inline
extent followed by regular extents results in EIO errors when doing reads
or writes against the first 4K of the file.
Also, the clone ioctl allows one to lose data if the source file consists
of a single inline extent, with a size of N bytes, and the destination
file consists of a single inline extent with a size of M bytes, where we
have M > N. In this case the clone operation removes the inline extent
from the destination file and then copies the inline extent from the
source file into the destination file - we lose the M - N bytes from the
destination file, a read operation will get the value 0x00 for any bytes
in the the range [N, M] (the destination inode's i_size remained as M,
that's why we can read past N bytes).
So fix this by not allowing such destructive operations to happen and
return errno EOPNOTSUPP to user space.
Currently the fstest btrfs/035 tests the data loss case but it totally
ignores this - i.e. expects the operation to succeed and does not check
the we got data loss.
The following test case for fstests exercises all these cases that result
in file corruption and data loss:
seq=`basename $0`
seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
tmp=/tmp/$$
status=1 # failure is the default!
trap "_cleanup; exit \$status" 0 1 2 3 15
_cleanup()
{
rm -f $tmp.*
}
# get standard environment, filters and checks
. ./common/rc
. ./common/filter
# real QA test starts here
_need_to_be_root
_supported_fs btrfs
_supported_os Linux
_require_scratch
_require_cloner
_require_btrfs_fs_feature "no_holes"
_require_btrfs_mkfs_feature "no-holes"
rm -f $seqres.full
test_cloning_inline_extents()
{
local mkfs_opts=$1
local mount_opts=$2
_scratch_mkfs $mkfs_opts >>$seqres.full 2>&1
_scratch_mount $mount_opts
# File bar, the source for all the following clone operations, consists
# of a single inline extent (50 bytes).
$XFS_IO_PROG -f -c "pwrite -S 0xbb 0 50" $SCRATCH_MNT/bar \
| _filter_xfs_io
# Test cloning into a file with an extent (non-inlined) where the
# destination offset overlaps that extent. It should not be possible to
# clone the inline extent from file bar into this file.
$XFS_IO_PROG -f -c "pwrite -S 0xaa 0K 16K" $SCRATCH_MNT/foo \
| _filter_xfs_io
$CLONER_PROG -s 0 -d 0 -l 0 $SCRATCH_MNT/bar $SCRATCH_MNT/foo
# Doing IO against any range in the first 4K of the file should work.
# Due to a past clone ioctl bug which allowed cloning the inline extent,
# these operations resulted in EIO errors.
echo "File foo data after clone operation:"
# All bytes should have the value 0xaa (clone operation failed and did
# not modify our file).
od -t x1 $SCRATCH_MNT/foo
$XFS_IO_PROG -c "pwrite -S 0xcc 0 100" $SCRATCH_MNT/foo | _filter_xfs_io
# Test cloning the inline extent against a file which has a hole in its
# first 4K followed by a non-inlined extent. It should not be possible
# as well to clone the inline extent from file bar into this file.
$XFS_IO_PROG -f -c "pwrite -S 0xdd 4K 12K" $SCRATCH_MNT/foo2 \
| _filter_xfs_io
$CLONER_PROG -s 0 -d 0 -l 0 $SCRATCH_MNT/bar $SCRATCH_MNT/foo2
# Doing IO against any range in the first 4K of the file should work.
# Due to a past clone ioctl bug which allowed cloning the inline extent,
# these operations resulted in EIO errors.
echo "File foo2 data after clone operation:"
# All bytes should have the value 0x00 (clone operation failed and did
# not modify our file).
od -t x1 $SCRATCH_MNT/foo2
$XFS_IO_PROG -c "pwrite -S 0xee 0 90" $SCRATCH_MNT/foo2 | _filter_xfs_io
# Test cloning the inline extent against a file which has a size of zero
# but has a prealloc extent. It should not be possible as well to clone
# the inline extent from file bar into this file.
$XFS_IO_PROG -f -c "falloc -k 0 1M" $SCRATCH_MNT/foo3 | _filter_xfs_io
$CLONER_PROG -s 0 -d 0 -l 0 $SCRATCH_MNT/bar $SCRATCH_MNT/foo3
# Doing IO against any range in the first 4K of the file should work.
# Due to a past clone ioctl bug which allowed cloning the inline extent,
# these operations resulted in EIO errors.
echo "First 50 bytes of foo3 after clone operation:"
# Should not be able to read any bytes, file has 0 bytes i_size (the
# clone operation failed and did not modify our file).
od -t x1 $SCRATCH_MNT/foo3
$XFS_IO_PROG -c "pwrite -S 0xff 0 90" $SCRATCH_MNT/foo3 | _filter_xfs_io
# Test cloning the inline extent against a file which consists of a
# single inline extent that has a size not greater than the size of
# bar's inline extent (40 < 50).
# It should be possible to do the extent cloning from bar to this file.
$XFS_IO_PROG -f -c "pwrite -S 0x01 0 40" $SCRATCH_MNT/foo4 \
| _filter_xfs_io
$CLONER_PROG -s 0 -d 0 -l 0 $SCRATCH_MNT/bar $SCRATCH_MNT/foo4
# Doing IO against any range in the first 4K of the file should work.
echo "File foo4 data after clone operation:"
# Must match file bar's content.
od -t x1 $SCRATCH_MNT/foo4
$XFS_IO_PROG -c "pwrite -S 0x02 0 90" $SCRATCH_MNT/foo4 | _filter_xfs_io
# Test cloning the inline extent against a file which consists of a
# single inline extent that has a size greater than the size of bar's
# inline extent (60 > 50).
# It should not be possible to clone the inline extent from file bar
# into this file.
$XFS_IO_PROG -f -c "pwrite -S 0x03 0 60" $SCRATCH_MNT/foo5 \
| _filter_xfs_io
$CLONER_PROG -s 0 -d 0 -l 0 $SCRATCH_MNT/bar $SCRATCH_MNT/foo5
# Reading the file should not fail.
echo "File foo5 data after clone operation:"
# Must have a size of 60 bytes, with all bytes having a value of 0x03
# (the clone operation failed and did not modify our file).
od -t x1 $SCRATCH_MNT/foo5
# Test cloning the inline extent against a file which has no extents but
# has a size greater than bar's inline extent (16K > 50).
# It should not be possible to clone the inline extent from file bar
# into this file.
$XFS_IO_PROG -f -c "truncate 16K" $SCRATCH_MNT/foo6 | _filter_xfs_io
$CLONER_PROG -s 0 -d 0 -l 0 $SCRATCH_MNT/bar $SCRATCH_MNT/foo6
# Reading the file should not fail.
echo "File foo6 data after clone operation:"
# Must have a size of 16K, with all bytes having a value of 0x00 (the
# clone operation failed and did not modify our file).
od -t x1 $SCRATCH_MNT/foo6
# Test cloning the inline extent against a file which has no extents but
# has a size not greater than bar's inline extent (30 < 50).
# It should be possible to clone the inline extent from file bar into
# this file.
$XFS_IO_PROG -f -c "truncate 30" $SCRATCH_MNT/foo7 | _filter_xfs_io
$CLONER_PROG -s 0 -d 0 -l 0 $SCRATCH_MNT/bar $SCRATCH_MNT/foo7
# Reading the file should not fail.
echo "File foo7 data after clone operation:"
# Must have a size of 50 bytes, with all bytes having a value of 0xbb.
od -t x1 $SCRATCH_MNT/foo7
# Test cloning the inline extent against a file which has a size not
# greater than the size of bar's inline extent (20 < 50) but has
# a prealloc extent that goes beyond the file's size. It should not be
# possible to clone the inline extent from bar into this file.
$XFS_IO_PROG -f -c "falloc -k 0 1M" \
-c "pwrite -S 0x88 0 20" \
$SCRATCH_MNT/foo8 | _filter_xfs_io
$CLONER_PROG -s 0 -d 0 -l 0 $SCRATCH_MNT/bar $SCRATCH_MNT/foo8
echo "File foo8 data after clone operation:"
# Must have a size of 20 bytes, with all bytes having a value of 0x88
# (the clone operation did not modify our file).
od -t x1 $SCRATCH_MNT/foo8
_scratch_unmount
}
echo -e "\nTesting without compression and without the no-holes feature...\n"
test_cloning_inline_extents
echo -e "\nTesting with compression and without the no-holes feature...\n"
test_cloning_inline_extents "" "-o compress"
echo -e "\nTesting without compression and with the no-holes feature...\n"
test_cloning_inline_extents "-O no-holes" ""
echo -e "\nTesting with compression and with the no-holes feature...\n"
test_cloning_inline_extents "-O no-holes" "-o compress"
status=0
exit
Cc: stable@vger.kernel.org
Signed-off-by: Filipe Manana <fdmanana@suse.com>
The code for btrfs inode-resolve has never worked properly for
files with enough hard links to trigger extrefs. It was trying to
get the leaf out of a path after freeing the path:
btrfs_release_path(path);
leaf = path->nodes[0];
item_size = btrfs_item_size_nr(leaf, slot);
The fix here is to use the extent buffer we cloned just a little higher
up to avoid deadlocks caused by using the leaf in the path.
Signed-off-by: Chris Mason <clm@fb.com>
cc: stable@vger.kernel.org # v3.7+
cc: Mark Fasheh <mfasheh@suse.de>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Mark Fasheh <mfasheh@suse.de>
We don't verify that all the balance filter arguments supplemented by
the flags are actually known to the kernel. Thus we let it silently pass
and do nothing.
At the moment this means only the 'limit' filter, but we're going to add
a few more soon so it's better to have that fixed. Also in older stable
kernels so that it works with newer userspace tools.
Cc: stable@vger.kernel.org # 3.16+
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
This fixes a regression introduced by 37b8d27d between v4.1 and v4.2.
When a snapshot is received, its received_uuid is set to the original
uuid of the subvolume. When that snapshot is then resent to a third
filesystem, it's received_uuid is set to the second uuid
instead of the original one. The same was true for the parent_uuid.
This behaviour was partially changed in 37b8d27d, but in that patch
only the parent_uuid was taken from the real original,
not the uuid itself, causing the search for the parent to fail in
the case below.
This happens for example when trying to send a series of linked
snapshots (e.g. created by snapper) from the backup file system back
to the original one.
The following commands reproduce the issue in v4.2.1
(no error in 4.1.6)
# setup three test file systems
for i in 1 2 3; do
truncate -s 50M fs$i
mkfs.btrfs fs$i
mkdir $i
mount fs$i $i
done
echo "content" > 1/testfile
btrfs su snapshot -r 1/ 1/snap1
echo "changed content" > 1/testfile
btrfs su snapshot -r 1/ 1/snap2
# works fine:
btrfs send 1/snap1 | btrfs receive 2/
btrfs send -p 1/snap1 1/snap2 | btrfs receive 2/
# ERROR: could not find parent subvolume
btrfs send 2/snap1 | btrfs receive 3/
btrfs send -p 2/snap1 2/snap2 | btrfs receive 3/
Signed-off-by: Robin Ruede <rruede+git@gmail.com>
Fixes: 37b8d27de5 ("Btrfs: use received_uuid of parent during send")
Cc: stable@vger.kernel.org # v4.2+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Tested-by: Ed Tomlinson <edt@aei.ca>
If we have a file that shares an extent with other files, when processing
the extent item relative to a shared extent, we blindly issue a clone
operation that will target a length matching the length in the extent item
and uses as a source some other file the receiver already has and points
to the same extent. However that range in the other file might not
exclusively point only to the shared extent, and so using that length
will result in the receiver getting a file with different data from the
one in the send snapshot. This issue happened both for incremental and
full send operations.
So fix this by issuing clone operations with lengths that don't cover
regions of the source file that point to different extents (or have holes).
The following test case for fstests reproduces the problem.
seq=`basename $0`
seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
tmp=/tmp/$$
status=1 # failure is the default!
trap "_cleanup; exit \$status" 0 1 2 3 15
_cleanup()
{
rm -fr $send_files_dir
rm -f $tmp.*
}
# get standard environment, filters and checks
. ./common/rc
. ./common/filter
# real QA test starts here
_supported_fs btrfs
_supported_os Linux
_require_scratch
_need_to_be_root
_require_cp_reflink
_require_xfs_io_command "fpunch"
send_files_dir=$TEST_DIR/btrfs-test-$seq
rm -f $seqres.full
rm -fr $send_files_dir
mkdir $send_files_dir
_scratch_mkfs >>$seqres.full 2>&1
_scratch_mount
# Create our test file with a single 100K extent.
$XFS_IO_PROG -f -c "pwrite -S 0xaa 0K 100K" \
$SCRATCH_MNT/foo | _filter_xfs_io
# Clone our file into a new file named bar.
cp --reflink=always $SCRATCH_MNT/foo $SCRATCH_MNT/bar
# Now overwrite parts of our foo file.
$XFS_IO_PROG -c "pwrite -S 0xbb 50K 10K" \
-c "pwrite -S 0xcc 90K 10K" \
-c "fpunch 70K 10k" \
$SCRATCH_MNT/foo | _filter_xfs_io
_run_btrfs_util_prog subvolume snapshot -r $SCRATCH_MNT \
$SCRATCH_MNT/snap
echo "File digests in the original filesystem:"
md5sum $SCRATCH_MNT/snap/foo | _filter_scratch
md5sum $SCRATCH_MNT/snap/bar | _filter_scratch
_run_btrfs_util_prog send $SCRATCH_MNT/snap -f $send_files_dir/1.snap
# Now recreate the filesystem by receiving the send stream and verify
# we get the same file contents that the original filesystem had.
_scratch_unmount
_scratch_mkfs >>$seqres.full 2>&1
_scratch_mount
_run_btrfs_util_prog receive $SCRATCH_MNT -f $send_files_dir/1.snap
# We expect the destination filesystem to have exactly the same file
# data as the original filesystem.
# The btrfs send implementation had a bug where it sent a clone
# operation from file foo into file bar covering the whole [0, 100K[
# range after creating and writing the file foo. This was incorrect
# because the file bar now included the updates done to file foo after
# we cloned foo to bar, breaking the COW nature of reflink copies
# (cloned extents).
echo "File digests in the new filesystem:"
md5sum $SCRATCH_MNT/snap/foo | _filter_scratch
md5sum $SCRATCH_MNT/snap/bar | _filter_scratch
status=0
exit
Another test case that reproduces the problem when we have compressed
extents:
seq=`basename $0`
seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
tmp=/tmp/$$
status=1 # failure is the default!
trap "_cleanup; exit \$status" 0 1 2 3 15
_cleanup()
{
rm -fr $send_files_dir
rm -f $tmp.*
}
# get standard environment, filters and checks
. ./common/rc
. ./common/filter
# real QA test starts here
_supported_fs btrfs
_supported_os Linux
_require_scratch
_need_to_be_root
_require_cp_reflink
send_files_dir=$TEST_DIR/btrfs-test-$seq
rm -f $seqres.full
rm -fr $send_files_dir
mkdir $send_files_dir
_scratch_mkfs >>$seqres.full 2>&1
_scratch_mount "-o compress"
# Create our file with an extent of 100K starting at file offset 0K.
$XFS_IO_PROG -f -c "pwrite -S 0xaa 0K 100K" \
-c "fsync" \
$SCRATCH_MNT/foo | _filter_xfs_io
# Rewrite part of the previous extent (its first 40K) and write a new
# 100K extent starting at file offset 100K.
$XFS_IO_PROG -c "pwrite -S 0xbb 0K 40K" \
-c "pwrite -S 0xcc 100K 100K" \
$SCRATCH_MNT/foo | _filter_xfs_io
# Our file foo now has 3 file extent items in its metadata:
#
# 1) One covering the file range 0 to 40K;
# 2) One covering the file range 40K to 100K, which points to the first
# extent we wrote to the file and has a data offset field with value
# 40K (our file no longer uses the first 40K of data from that
# extent);
# 3) One covering the file range 100K to 200K.
# Now clone our file foo into file bar.
cp --reflink=always $SCRATCH_MNT/foo $SCRATCH_MNT/bar
# Create our snapshot for the send operation.
_run_btrfs_util_prog subvolume snapshot -r $SCRATCH_MNT \
$SCRATCH_MNT/snap
echo "File digests in the original filesystem:"
md5sum $SCRATCH_MNT/snap/foo | _filter_scratch
md5sum $SCRATCH_MNT/snap/bar | _filter_scratch
_run_btrfs_util_prog send $SCRATCH_MNT/snap -f $send_files_dir/1.snap
# Now recreate the filesystem by receiving the send stream and verify we
# get the same file contents that the original filesystem had.
# Btrfs send used to issue a clone operation from foo's range
# [80K, 140K[ to bar's range [40K, 100K[ when cloning the extent pointed
# to by foo's second file extent item, this was incorrect because of bad
# accounting of the file extent item's data offset field. The correct
# range to clone from should have been [40K, 100K[.
_scratch_unmount
_scratch_mkfs >>$seqres.full 2>&1
_scratch_mount "-o compress"
_run_btrfs_util_prog receive $SCRATCH_MNT -f $send_files_dir/1.snap
echo "File digests in the new filesystem:"
# Must match the digests we got in the original filesystem.
md5sum $SCRATCH_MNT/snap/foo | _filter_scratch
md5sum $SCRATCH_MNT/snap/bar | _filter_scratch
status=0
exit
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Removing barriers is scary, but a call to atomic_dec_and_test implies
a barrier, so we don't need to issue another one.
Signed-off-by: David Sterba <dsterba@suse.com>
waitqueue_active should be preceded by a barrier, in this function we
don't need to call it all the time.
Signed-off-by: David Sterba <dsterba@suse.com>
Normally the waitqueue_active would need a barrier, but this is not
necessary here because it's not a performance sensitive context and we
can call wake_up directly.
Suggested-by: Chris Mason <clm@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Pull btrfs fixes from Chris Mason:
"These are small and assorted. Neil's is the oldest, I dropped the
ball thinking he was going to send it in"
* 'for-linus-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
Btrfs: support NFSv2 export
Btrfs: open_ctree: Fix possible memory leak
Btrfs: fix deadlock when finalizing block group creation
Btrfs: update fix for read corruption of compressed and shared extents
Btrfs: send, fix corner case for reference overwrite detection
Convert the simple cases, not all functions provide a way to reach the
fs_info. Also skipped debugging messages (print-tree, integrity
checker and pr_debug) and messages that are printed from possibly
unfinished mount.
Signed-off-by: David Sterba <dsterba@suse.com>
Due to the missing variants there are messages that lack the information
printed by btrfs_info etc helpers.
Signed-off-by: David Sterba <dsterba@suse.com>
The "fh_len" passed to ->fh_to_* is not guaranteed to be that same as
that returned by encode_fh - it may be larger.
With NFSv2, the filehandle is fixed length, so it may appear longer
than expected and be zero-padded.
So we must test that fh_len is at least some value, not exactly equal
to it.
Signed-off-by: NeilBrown <neilb@suse.de>
Acked-by: David Sterba <dsterba@suse.cz>
After reading one of chunk or tree root tree's root node from disk, if the
root node does not have EXTENT_BUFFER_UPTODATE flag set, we fail to release
the memory used by the root node. Fix this.
Signed-off-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Josef ran into a deadlock while a transaction handle was finalizing the
creation of its block groups, which produced the following trace:
[260445.593112] fio D ffff88022a9df468 0 8924 4518 0x00000084
[260445.593119] ffff88022a9df468 ffffffff81c134c0 ffff880429693c00 ffff88022a9df488
[260445.593126] ffff88022a9e0000 ffff8803490d7b00 ffff8803490d7b18 ffff88022a9df4b0
[260445.593132] ffff8803490d7af8 ffff88022a9df488 ffffffff8175a437 ffff8803490d7b00
[260445.593137] Call Trace:
[260445.593145] [<ffffffff8175a437>] schedule+0x37/0x80
[260445.593189] [<ffffffffa0850f37>] btrfs_tree_lock+0xa7/0x1f0 [btrfs]
[260445.593197] [<ffffffff810db7c0>] ? prepare_to_wait_event+0xf0/0xf0
[260445.593225] [<ffffffffa07eac44>] btrfs_lock_root_node+0x34/0x50 [btrfs]
[260445.593253] [<ffffffffa07eff6b>] btrfs_search_slot+0x88b/0xa00 [btrfs]
[260445.593295] [<ffffffffa08389df>] ? free_extent_buffer+0x4f/0x90 [btrfs]
[260445.593324] [<ffffffffa07f1a06>] btrfs_insert_empty_items+0x66/0xc0 [btrfs]
[260445.593351] [<ffffffffa07ea94a>] ? btrfs_alloc_path+0x1a/0x20 [btrfs]
[260445.593394] [<ffffffffa08403b9>] btrfs_finish_chunk_alloc+0x1c9/0x570 [btrfs]
[260445.593427] [<ffffffffa08002ab>] btrfs_create_pending_block_groups+0x11b/0x200 [btrfs]
[260445.593459] [<ffffffffa0800964>] do_chunk_alloc+0x2a4/0x2e0 [btrfs]
[260445.593491] [<ffffffffa0803815>] find_free_extent+0xa55/0xd90 [btrfs]
[260445.593524] [<ffffffffa0803c22>] btrfs_reserve_extent+0xd2/0x220 [btrfs]
[260445.593532] [<ffffffff8119fe5d>] ? account_page_dirtied+0xdd/0x170
[260445.593564] [<ffffffffa0803e78>] btrfs_alloc_tree_block+0x108/0x4a0 [btrfs]
[260445.593597] [<ffffffffa080c9de>] ? btree_set_page_dirty+0xe/0x10 [btrfs]
[260445.593626] [<ffffffffa07eb5cd>] __btrfs_cow_block+0x12d/0x5b0 [btrfs]
[260445.593654] [<ffffffffa07ebbff>] btrfs_cow_block+0x11f/0x1c0 [btrfs]
[260445.593682] [<ffffffffa07ef8c7>] btrfs_search_slot+0x1e7/0xa00 [btrfs]
[260445.593724] [<ffffffffa08389df>] ? free_extent_buffer+0x4f/0x90 [btrfs]
[260445.593752] [<ffffffffa07f1a06>] btrfs_insert_empty_items+0x66/0xc0 [btrfs]
[260445.593830] [<ffffffffa07ea94a>] ? btrfs_alloc_path+0x1a/0x20 [btrfs]
[260445.593905] [<ffffffffa08403b9>] btrfs_finish_chunk_alloc+0x1c9/0x570 [btrfs]
[260445.593946] [<ffffffffa08002ab>] btrfs_create_pending_block_groups+0x11b/0x200 [btrfs]
[260445.593990] [<ffffffffa0815798>] btrfs_commit_transaction+0xa8/0xb40 [btrfs]
[260445.594042] [<ffffffffa085abcd>] ? btrfs_log_dentry_safe+0x6d/0x80 [btrfs]
[260445.594089] [<ffffffffa082bc84>] btrfs_sync_file+0x294/0x350 [btrfs]
[260445.594115] [<ffffffff8123e29b>] vfs_fsync_range+0x3b/0xa0
[260445.594133] [<ffffffff81023891>] ? syscall_trace_enter_phase1+0x131/0x180
[260445.594149] [<ffffffff8123e35d>] do_fsync+0x3d/0x70
[260445.594169] [<ffffffff81023bb8>] ? syscall_trace_leave+0xb8/0x110
[260445.594187] [<ffffffff8123e600>] SyS_fsync+0x10/0x20
[260445.594204] [<ffffffff8175de6e>] entry_SYSCALL_64_fastpath+0x12/0x71
This happened because the same transaction handle created a large number
of block groups and while finalizing their creation (inserting new items
and updating existing items in the chunk and device trees) a new metadata
extent had to be allocated and no free space was found in the current
metadata block groups, which made find_free_extent() attempt to allocate
a new block group via do_chunk_alloc(). However at do_chunk_alloc() we
ended up allocating a new system chunk too and exceeded the threshold
of 2Mb of reserved chunk bytes, which makes do_chunk_alloc() enter the
final part of block group creation again (at
btrfs_create_pending_block_groups()) and attempt to lock again the root
of the chunk tree when it's already write locked by the same task.
Similarly we can deadlock on extent tree nodes/leafs if while we are
running delayed references we end up creating a new metadata block group
in order to allocate a new node/leaf for the extent tree (as part of
a CoW operation or growing the tree), as btrfs_create_pending_block_groups
inserts items into the extent tree as well. In this case we get the
following trace:
[14242.773581] fio D ffff880428ca3418 0 3615 3100 0x00000084
[14242.773588] ffff880428ca3418 ffff88042d66b000 ffff88042a03c800 ffff880428ca3438
[14242.773594] ffff880428ca4000 ffff8803e4b20190 ffff8803e4b201a8 ffff880428ca3460
[14242.773600] ffff8803e4b20188 ffff880428ca3438 ffffffff8175a437 ffff8803e4b20190
[14242.773606] Call Trace:
[14242.773613] [<ffffffff8175a437>] schedule+0x37/0x80
[14242.773656] [<ffffffffa057ff07>] btrfs_tree_lock+0xa7/0x1f0 [btrfs]
[14242.773664] [<ffffffff810db7c0>] ? prepare_to_wait_event+0xf0/0xf0
[14242.773692] [<ffffffffa0519c44>] btrfs_lock_root_node+0x34/0x50 [btrfs]
[14242.773720] [<ffffffffa051ef6b>] btrfs_search_slot+0x88b/0xa00 [btrfs]
[14242.773750] [<ffffffffa0520a06>] btrfs_insert_empty_items+0x66/0xc0 [btrfs]
[14242.773758] [<ffffffff811ef4a2>] ? kmem_cache_alloc+0x1d2/0x200
[14242.773786] [<ffffffffa0520ad1>] btrfs_insert_item+0x71/0xf0 [btrfs]
[14242.773818] [<ffffffffa052f292>] btrfs_create_pending_block_groups+0x102/0x200 [btrfs]
[14242.773850] [<ffffffffa052f96e>] do_chunk_alloc+0x2ae/0x2f0 [btrfs]
[14242.773934] [<ffffffffa0532825>] find_free_extent+0xa55/0xd90 [btrfs]
[14242.773998] [<ffffffffa0532c22>] btrfs_reserve_extent+0xc2/0x1d0 [btrfs]
[14242.774041] [<ffffffffa0532e38>] btrfs_alloc_tree_block+0x108/0x4a0 [btrfs]
[14242.774078] [<ffffffffa051a5cd>] __btrfs_cow_block+0x12d/0x5b0 [btrfs]
[14242.774118] [<ffffffffa051abff>] btrfs_cow_block+0x11f/0x1c0 [btrfs]
[14242.774155] [<ffffffffa051e8c7>] btrfs_search_slot+0x1e7/0xa00 [btrfs]
[14242.774194] [<ffffffffa0528021>] ? __btrfs_free_extent.isra.70+0x2e1/0xcb0 [btrfs]
[14242.774235] [<ffffffffa0520a06>] btrfs_insert_empty_items+0x66/0xc0 [btrfs]
[14242.774274] [<ffffffffa051994a>] ? btrfs_alloc_path+0x1a/0x20 [btrfs]
[14242.774318] [<ffffffffa052c433>] __btrfs_run_delayed_refs+0xbb3/0x1020 [btrfs]
[14242.774358] [<ffffffffa052f404>] btrfs_run_delayed_refs.part.78+0x74/0x280 [btrfs]
[14242.774391] [<ffffffffa052f627>] btrfs_run_delayed_refs+0x17/0x20 [btrfs]
[14242.774432] [<ffffffffa05be236>] commit_cowonly_roots+0x8d/0x2bd [btrfs]
[14242.774474] [<ffffffffa059d07f>] ? __btrfs_run_delayed_items+0x1cf/0x210 [btrfs]
[14242.774516] [<ffffffffa05adac3>] ? btrfs_qgroup_account_extents+0x83/0x130 [btrfs]
[14242.774558] [<ffffffffa0544c40>] btrfs_commit_transaction+0x590/0xb40 [btrfs]
[14242.774599] [<ffffffffa0589b9d>] ? btrfs_log_dentry_safe+0x6d/0x80 [btrfs]
[14242.774642] [<ffffffffa055ac54>] btrfs_sync_file+0x294/0x350 [btrfs]
[14242.774650] [<ffffffff8123e29b>] vfs_fsync_range+0x3b/0xa0
[14242.774657] [<ffffffff81023891>] ? syscall_trace_enter_phase1+0x131/0x180
[14242.774663] [<ffffffff8123e35d>] do_fsync+0x3d/0x70
[14242.774669] [<ffffffff81023bb8>] ? syscall_trace_leave+0xb8/0x110
[14242.774675] [<ffffffff8123e600>] SyS_fsync+0x10/0x20
[14242.774681] [<ffffffff8175de6e>] entry_SYSCALL_64_fastpath+0x12/0x71
Fix this by never recursing into the finalization phase of block group
creation and making sure we never trigger the finalization of block group
creation while running delayed references.
Reported-by: Josef Bacik <jbacik@fb.com>
Fixes: 00d80e342c ("Btrfs: fix quick exhaustion of the system array in the superblock")
Signed-off-by: Filipe Manana <fdmanana@suse.com>
My previous fix in commit 005efedf2c ("Btrfs: fix read corruption of
compressed and shared extents") was effective only if the compressed
extents cover a file range with a length that is not a multiple of 16
pages. That's because the detection of when we reached a different range
of the file that shares the same compressed extent as the previously
processed range was done at extent_io.c:__do_contiguous_readpages(),
which covers subranges with a length up to 16 pages, because
extent_readpages() groups the pages in clusters no larger than 16 pages.
So fix this by tracking the start of the previously processed file
range's extent map at extent_readpages().
The following test case for fstests reproduces the issue:
seq=`basename $0`
seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
tmp=/tmp/$$
status=1 # failure is the default!
trap "_cleanup; exit \$status" 0 1 2 3 15
_cleanup()
{
rm -f $tmp.*
}
# get standard environment, filters and checks
. ./common/rc
. ./common/filter
# real QA test starts here
_need_to_be_root
_supported_fs btrfs
_supported_os Linux
_require_scratch
_require_cloner
rm -f $seqres.full
test_clone_and_read_compressed_extent()
{
local mount_opts=$1
_scratch_mkfs >>$seqres.full 2>&1
_scratch_mount $mount_opts
# Create our test file with a single extent of 64Kb that is going to
# be compressed no matter which compression algo is used (zlib/lzo).
$XFS_IO_PROG -f -c "pwrite -S 0xaa 0K 64K" \
$SCRATCH_MNT/foo | _filter_xfs_io
# Now clone the compressed extent into an adjacent file offset.
$CLONER_PROG -s 0 -d $((64 * 1024)) -l $((64 * 1024)) \
$SCRATCH_MNT/foo $SCRATCH_MNT/foo
echo "File digest before unmount:"
md5sum $SCRATCH_MNT/foo | _filter_scratch
# Remount the fs or clear the page cache to trigger the bug in
# btrfs. Because the extent has an uncompressed length that is a
# multiple of 16 pages, all the pages belonging to the second range
# of the file (64K to 128K), which points to the same extent as the
# first range (0K to 64K), had their contents full of zeroes instead
# of the byte 0xaa. This was a bug exclusively in the read path of
# compressed extents, the correct data was stored on disk, btrfs
# just failed to fill in the pages correctly.
_scratch_remount
echo "File digest after remount:"
# Must match the digest we got before.
md5sum $SCRATCH_MNT/foo | _filter_scratch
}
echo -e "\nTesting with zlib compression..."
test_clone_and_read_compressed_extent "-o compress=zlib"
_scratch_unmount
echo -e "\nTesting with lzo compression..."
test_clone_and_read_compressed_extent "-o compress=lzo"
status=0
exit
Cc: stable@vger.kernel.org
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Tested-by: Timofey Titovets <nefelim4ag@gmail.com>
When the inode given to did_overwrite_ref() matches the current progress
and has a reference that collides with the reference of other inode that
has the same number as the current progress, we were always telling our
caller that the inode's reference was overwritten, which is incorrect
because the other inode might be a new inode (different generation number)
in which case we must return false from did_overwrite_ref() so that its
callers don't use an orphanized path for the inode (as it will never be
orphanized, instead it will be unlinked and the new inode created later).
The following test case for fstests reproduces the issue:
seq=`basename $0`
seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
tmp=/tmp/$$
status=1 # failure is the default!
trap "_cleanup; exit \$status" 0 1 2 3 15
_cleanup()
{
rm -fr $send_files_dir
rm -f $tmp.*
}
# get standard environment, filters and checks
. ./common/rc
. ./common/filter
# real QA test starts here
_supported_fs btrfs
_supported_os Linux
_require_scratch
_need_to_be_root
send_files_dir=$TEST_DIR/btrfs-test-$seq
rm -f $seqres.full
rm -fr $send_files_dir
mkdir $send_files_dir
_scratch_mkfs >>$seqres.full 2>&1
_scratch_mount
# Create our test file with a single extent of 64K.
mkdir -p $SCRATCH_MNT/foo
$XFS_IO_PROG -f -c "pwrite -S 0xaa 0 64K" $SCRATCH_MNT/foo/bar \
| _filter_xfs_io
_run_btrfs_util_prog subvolume snapshot -r $SCRATCH_MNT \
$SCRATCH_MNT/mysnap1
_run_btrfs_util_prog subvolume snapshot $SCRATCH_MNT \
$SCRATCH_MNT/mysnap2
echo "File digest before being replaced:"
md5sum $SCRATCH_MNT/mysnap1/foo/bar | _filter_scratch
# Remove the file and then create a new one in the same location with
# the same name but with different content. This new file ends up
# getting the same inode number as the previous one, because that inode
# number was the highest inode number used by the snapshot's root and
# therefore when attempting to find the a new inode number for the new
# file, we end up reusing the same inode number. This happens because
# currently btrfs uses the highest inode number summed by 1 for the
# first inode created once a snapshot's root is loaded (done at
# fs/btrfs/inode-map.c:btrfs_find_free_objectid in the linux kernel
# tree).
# Having these two different files in the snapshots with the same inode
# number (but different generation numbers) caused the btrfs send code
# to emit an incorrect path for the file when issuing an unlink
# operation because it failed to realize they were different files.
rm -f $SCRATCH_MNT/mysnap2/foo/bar
$XFS_IO_PROG -f -c "pwrite -S 0xbb 0 96K" \
$SCRATCH_MNT/mysnap2/foo/bar | _filter_xfs_io
_run_btrfs_util_prog subvolume snapshot -r $SCRATCH_MNT/mysnap2 \
$SCRATCH_MNT/mysnap2_ro
_run_btrfs_util_prog send $SCRATCH_MNT/mysnap1 -f $send_files_dir/1.snap
_run_btrfs_util_prog send -p $SCRATCH_MNT/mysnap1 \
$SCRATCH_MNT/mysnap2_ro -f $send_files_dir/2.snap
echo "File digest in the original filesystem after being replaced:"
md5sum $SCRATCH_MNT/mysnap2_ro/foo/bar | _filter_scratch
# Now recreate the filesystem by receiving both send streams and verify
# we get the same file contents that the original filesystem had.
_scratch_unmount
_scratch_mkfs >>$seqres.full 2>&1
_scratch_mount
_run_btrfs_util_prog receive -vv $SCRATCH_MNT -f $send_files_dir/1.snap
_run_btrfs_util_prog receive -vv $SCRATCH_MNT -f $send_files_dir/2.snap
echo "File digest in the new filesystem:"
# Must match the digest from the new file.
md5sum $SCRATCH_MNT/mysnap2_ro/foo/bar | _filter_scratch
status=0
exit
Reported-by: Martin Raiber <martin@urbackup.org>
Fixes: 8b191a6849 ("Btrfs: incremental send, check if orphanized dir inode needs delayed rename")
Signed-off-by: Filipe Manana <fdmanana@suse.com>
To avoid deadlock described in commit 084b6e7c76 ("btrfs: Fix a
lockdep warning when running xfstest."), we should move kobj stuff out
of dev_replace lock range.
"It is because the btrfs_kobj_{add/rm}_device() will call memory
allocation with GFP_KERNEL,
which may flush fs page cache to free space, waiting for it self to do
the commit, causing the deadlock.
To solve the problem, move btrfs_kobj_{add/rm}_device() out of the
dev_replace lock range, also involing split the
btrfs_rm_dev_replace_srcdev() function into remove and free parts.
Now only btrfs_rm_dev_replace_remove_srcdev() is called in dev_replace
lock range, and kobj_{add/rm} and btrfs_rm_dev_replace_free_srcdev() are
called out of the lock range."
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
[added lockup description]
Signed-off-by: David Sterba <dsterba@suse.com>
Originally the message was not in a helper but ended up there. We should
print error messages from callers instead.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
[reworded subject and changelog]
Signed-off-by: David Sterba <dsterba@suse.com>
By general rule of thumb there shouldn't be any way that user land
could trigger a kernel operation just by sending wrong arguments.
Here do commit cleanups after user input has been verified.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This patch updates and renames btrfs_scratch_superblocks, (which is used
by the replace device thread), with those fixes from the scratch
superblock code section of btrfs_rm_device(). The fixes are:
Scratch all copies of superblock
Notify kobject that superblock has been changed
Update time on the device
So that btrfs_rm_device() can use the function
btrfs_scratch_superblocks() instead of its own scratch code. And further
replace deivce code which similarly releases device back to the system,
will have the fixes from the btrfs device delete.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
[renamed to btrfs_scratch_superblock]
Signed-off-by: David Sterba <dsterba@suse.com>
This uses a chunk of code from btrfs_read_dev_super() and creates
a function called btrfs_read_dev_one_super() so that next patch
can use it for scratch superblock.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
[renamed bufhead to bh]
Signed-off-by: David Sterba <dsterba@suse.com>
Use btrfs specific error code BTRFS_ERROR_DEV_MISSING_NOT_FOUND instead
of -ENOENT. Next this removes the logging when user specifies "missing"
and we don't find it in the kernel device list. Logging are for system
events not for user input errors.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_error() and btrfs_std_error() does the same thing
and calls _btrfs_std_error(), so consolidate them together.
And the main motivation is that btrfs_error() is closely
named with btrfs_err(), one handles error action the other
is to log the error, so don't closely name them.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Suggested-by: David Sterba <dsterba@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
error handling logic behaves differently with or without
CONFIG_PRINTK defined, since there are two copies of the same
function which a bit of different logic
One, when CONFIG_PRINTK is defined, code is
__btrfs_std_error(..)
{
::
save_error_info(fs_info);
if (sb->s_flags & MS_BORN)
btrfs_handle_error(fs_info);
}
and two when CONFIG_PRINTK is not defined, the code is
__btrfs_std_error(..)
{
::
if (sb->s_flags & MS_BORN) {
save_error_info(fs_info);
btrfs_handle_error(fs_info);
}
}
I doubt if this was intentional ? and appear to have caused since
we maintain two copies of the same function and they got diverged
with commits.
Now to decide which logic is correct reviewed changes as below,
533574c6bc
Commit added two copies of this function
cf79ffb5b7
Commit made change to only one copy of the function and to the
copy when CONFIG_PRINTK is defined.
To fix this, instead of maintaining two copies of same function
approach, maintain single function, and just put the extra
portion of the code under CONFIG_PRINTK define.
This patch just does that. And keeps code of with CONFIG_PRINTK
defined.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This will return EIO when __bread() fails to read SB,
instead of EINVAL.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Pull btrfs fixes from Chris Mason:
"This is an assorted set I've been queuing up:
Jeff Mahoney tracked down a tricky one where we ended up starting IO
on the wrong mapping for special files in btrfs_evict_inode. A few
people reported this one on the list.
Filipe found (and provided a test for) a difficult bug in reading
compressed extents, and Josef fixed up some quota record keeping with
snapshot deletion. Chandan killed off an accounting bug during DIO
that lead to WARN_ONs as we freed inodes"
* 'for-linus-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
Btrfs: keep dropped roots in cache until transaction commit
Btrfs: Direct I/O: Fix space accounting
btrfs: skip waiting on ordered range for special files
Btrfs: fix read corruption of compressed and shared extents
Btrfs: remove unnecessary locking of cleaner_mutex to avoid deadlock
Btrfs: don't initialize a space info as full to prevent ENOSPC
When dropping a snapshot we need to account for the qgroup changes. If we drop
the snapshot in all one go then the backref code will fail to find blocks from
the snapshot we dropped since it won't be able to find the root in the fs root
cache. This can lead to us failing to find refs from other roots that pointed
at blocks in the now deleted root. To handle this we need to not remove the fs
roots from the cache until after we process the qgroup operations. Do this by
adding dropped roots to a list on the transaction, and letting the transaction
remove the roots at the same time it drops the commit roots. This will keep all
of the backref searching code in sync properly, and fixes a problem Mark was
seeing with snapshot delete and qgroups. Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Tested-by: Holger Hoffstätte <holger.hoffstaette@googlemail.com>
Signed-off-by: Chris Mason <clm@fb.com>
The following call trace is seen when generic/095 test is executed,
WARNING: CPU: 3 PID: 2769 at /home/chandan/code/repos/linux/fs/btrfs/inode.c:8967 btrfs_destroy_inode+0x284/0x2a0()
Modules linked in:
CPU: 3 PID: 2769 Comm: umount Not tainted 4.2.0-rc5+ #31
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.7.5-20150306_163512-brownie 04/01/2014
ffffffff81c08150 ffff8802ec9cbce8 ffffffff81984058 ffff8802ffd8feb0
0000000000000000 ffff8802ec9cbd28 ffffffff81050385 ffff8802ec9cbd38
ffff8802d12f8588 ffff8802d12f8588 ffff8802f15ab000 ffff8800bb96c0b0
Call Trace:
[<ffffffff81984058>] dump_stack+0x45/0x57
[<ffffffff81050385>] warn_slowpath_common+0x85/0xc0
[<ffffffff81050465>] warn_slowpath_null+0x15/0x20
[<ffffffff81340294>] btrfs_destroy_inode+0x284/0x2a0
[<ffffffff8117ce07>] destroy_inode+0x37/0x60
[<ffffffff8117cf39>] evict+0x109/0x170
[<ffffffff8117cfd5>] dispose_list+0x35/0x50
[<ffffffff8117dd3a>] evict_inodes+0xaa/0x100
[<ffffffff81165667>] generic_shutdown_super+0x47/0xf0
[<ffffffff81165951>] kill_anon_super+0x11/0x20
[<ffffffff81302093>] btrfs_kill_super+0x13/0x110
[<ffffffff81165c99>] deactivate_locked_super+0x39/0x70
[<ffffffff811660cf>] deactivate_super+0x5f/0x70
[<ffffffff81180e1e>] cleanup_mnt+0x3e/0x90
[<ffffffff81180ebd>] __cleanup_mnt+0xd/0x10
[<ffffffff81069c06>] task_work_run+0x96/0xb0
[<ffffffff81003a3d>] do_notify_resume+0x3d/0x50
[<ffffffff8198cbc2>] int_signal+0x12/0x17
This means that the inode had non-zero "outstanding extents" during
eviction. This occurs because, during direct I/O a task which successfully
used up its reserved data space would set BTRFS_INODE_DIO_READY bit and does
not clear the bit after finishing the DIO write. A future DIO write could
actually fail and the unused reserve space won't be freed because of the
previously set BTRFS_INODE_DIO_READY bit.
Clearing the BTRFS_INODE_DIO_READY bit in btrfs_direct_IO() caused the
following issue,
|-----------------------------------+-------------------------------------|
| Task A | Task B |
|-----------------------------------+-------------------------------------|
| Start direct i/o write on inode X.| |
| reserve space | |
| Allocate ordered extent | |
| release reserved space | |
| Set BTRFS_INODE_DIO_READY bit. | |
| | splice() |
| | Transfer data from pipe buffer to |
| | destination file. |
| | - kmap(pipe buffer page) |
| | - Start direct i/o write on |
| | inode X. |
| | - reserve space |
| | - dio_refill_pages() |
| | - sdio->blocks_available == 0 |
| | - Since a kernel address is |
| | being passed instead of a |
| | user space address, |
| | iov_iter_get_pages() returns |
| | -EFAULT. |
| | - Since BTRFS_INODE_DIO_READY is |
| | set, we don't release reserved |
| | space. |
| | - Clear BTRFS_INODE_DIO_READY bit.|
| -EIOCBQUEUED is returned. | |
|-----------------------------------+-------------------------------------|
Hence this commit introduces "struct btrfs_dio_data" to track the usage of
reserved data space. The remaining unused "reserve space" can now be freed
reliably.
Signed-off-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Chris Mason <clm@fb.com>
In btrfs_evict_inode, we properly truncate the page cache for evicted
inodes but then we call btrfs_wait_ordered_range for every inode as well.
It's the right thing to do for regular files but results in incorrect
behavior for device inodes for block devices.
filemap_fdatawrite_range gets called with inode->i_mapping which gets
resolved to the block device inode before getting passed to
wbc_attach_fdatawrite_inode and ultimately to inode_to_bdi. What happens
next depends on whether there's an open file handle associated with the
inode. If there is, we write to the block device, which is unexpected
behavior. If there isn't, we through normally and inode->i_data is used.
We can also end up racing against open/close which can result in crashes
when i_mapping points to a block device inode that has been closed.
Since there can't be any page cache associated with special file inodes,
it's safe to skip the btrfs_wait_ordered_range call entirely and avoid
the problem.
Cc: <stable@vger.kernel.org>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=100911
Tested-by: Christoph Biedl <linux-kernel.bfrz@manchmal.in-ulm.de>
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
If a file has a range pointing to a compressed extent, followed by
another range that points to the same compressed extent and a read
operation attempts to read both ranges (either completely or part of
them), the pages that correspond to the second range are incorrectly
filled with zeroes.
Consider the following example:
File layout
[0 - 8K] [8K - 24K]
| |
| |
points to extent X, points to extent X,
offset 4K, length of 8K offset 0, length 16K
[extent X, compressed length = 4K uncompressed length = 16K]
If a readpages() call spans the 2 ranges, a single bio to read the extent
is submitted - extent_io.c:submit_extent_page() would only create a new
bio to cover the second range pointing to the extent if the extent it
points to had a different logical address than the extent associated with
the first range. This has a consequence of the compressed read end io
handler (compression.c:end_compressed_bio_read()) finish once the extent
is decompressed into the pages covering the first range, leaving the
remaining pages (belonging to the second range) filled with zeroes (done
by compression.c:btrfs_clear_biovec_end()).
So fix this by submitting the current bio whenever we find a range
pointing to a compressed extent that was preceded by a range with a
different extent map. This is the simplest solution for this corner
case. Making the end io callback populate both ranges (or more, if we
have multiple pointing to the same extent) is a much more complex
solution since each bio is tightly coupled with a single extent map and
the extent maps associated to the ranges pointing to the shared extent
can have different offsets and lengths.
The following test case for fstests triggers the issue:
seq=`basename $0`
seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
tmp=/tmp/$$
status=1 # failure is the default!
trap "_cleanup; exit \$status" 0 1 2 3 15
_cleanup()
{
rm -f $tmp.*
}
# get standard environment, filters and checks
. ./common/rc
. ./common/filter
# real QA test starts here
_need_to_be_root
_supported_fs btrfs
_supported_os Linux
_require_scratch
_require_cloner
rm -f $seqres.full
test_clone_and_read_compressed_extent()
{
local mount_opts=$1
_scratch_mkfs >>$seqres.full 2>&1
_scratch_mount $mount_opts
# Create a test file with a single extent that is compressed (the
# data we write into it is highly compressible no matter which
# compression algorithm is used, zlib or lzo).
$XFS_IO_PROG -f -c "pwrite -S 0xaa 0K 4K" \
-c "pwrite -S 0xbb 4K 8K" \
-c "pwrite -S 0xcc 12K 4K" \
$SCRATCH_MNT/foo | _filter_xfs_io
# Now clone our extent into an adjacent offset.
$CLONER_PROG -s $((4 * 1024)) -d $((16 * 1024)) -l $((8 * 1024)) \
$SCRATCH_MNT/foo $SCRATCH_MNT/foo
# Same as before but for this file we clone the extent into a lower
# file offset.
$XFS_IO_PROG -f -c "pwrite -S 0xaa 8K 4K" \
-c "pwrite -S 0xbb 12K 8K" \
-c "pwrite -S 0xcc 20K 4K" \
$SCRATCH_MNT/bar | _filter_xfs_io
$CLONER_PROG -s $((12 * 1024)) -d 0 -l $((8 * 1024)) \
$SCRATCH_MNT/bar $SCRATCH_MNT/bar
echo "File digests before unmounting filesystem:"
md5sum $SCRATCH_MNT/foo | _filter_scratch
md5sum $SCRATCH_MNT/bar | _filter_scratch
# Evicting the inode or clearing the page cache before reading
# again the file would also trigger the bug - reads were returning
# all bytes in the range corresponding to the second reference to
# the extent with a value of 0, but the correct data was persisted
# (it was a bug exclusively in the read path). The issue happened
# only if the same readpages() call targeted pages belonging to the
# first and second ranges that point to the same compressed extent.
_scratch_remount
echo "File digests after mounting filesystem again:"
# Must match the same digests we got before.
md5sum $SCRATCH_MNT/foo | _filter_scratch
md5sum $SCRATCH_MNT/bar | _filter_scratch
}
echo -e "\nTesting with zlib compression..."
test_clone_and_read_compressed_extent "-o compress=zlib"
_scratch_unmount
echo -e "\nTesting with lzo compression..."
test_clone_and_read_compressed_extent "-o compress=lzo"
status=0
exit
Cc: stable@vger.kernel.org
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Qu Wenruo<quwenruo@cn.fujitsu.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Pull btrfs cleanups and fixes from Chris Mason:
"These are small cleanups, and also some fixes for our async worker
thread initialization.
I was having some trouble testing these, but it ended up being a
combination of changing around my test servers and a shiny new
schedule while atomic from the new start/finish_plug in
writeback_sb_inodes().
That one only hits on btrfs raid5/6 or MD raid10, and if I wasn't
changing a bunch of things in my test setup at once it would have been
really clear. Fix for writeback_sb_inodes() on the way as well"
* 'for-linus-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
Btrfs: cleanup: remove unnecessary check before btrfs_free_path is called
btrfs: async_thread: Fix workqueue 'max_active' value when initializing
btrfs: Add raid56 support for updating num_tolerated_disk_barrier_failures in btrfs_balance
btrfs: Cleanup for btrfs_calc_num_tolerated_disk_barrier_failures
btrfs: Remove noused chunk_tree and chunk_objectid from scrub_enumerate_chunks and scrub_chunk
btrfs: Update out-of-date "skip parity stripe" comment
After commmit e44163e177 ("btrfs: explictly delete unused block groups
in close_ctree and ro-remount"), added in the 4.3 merge window, we have
calls to btrfs_delete_unused_bgs() while holding the cleaner_mutex.
This can cause a deadlock with a concurrent block group relocation (when
a filesystem balance or shrink operation is in progress for example)
because btrfs_delete_unused_bgs() locks delete_unused_bgs_mutex and the
relocation path locks first delete_unused_bgs_mutex and then it locks
cleaner_mutex, resulting in a classic ABBA deadlock:
CPU 0 CPU 1
lock fs_info->cleaner_mutex
__btrfs_balance() || btrfs_shrink_device()
lock fs_info->delete_unused_bgs_mutex
btrfs_relocate_chunk()
btrfs_relocate_block_group()
lock fs_info->cleaner_mutex
btrfs_delete_unused_bgs()
lock fs_info->delete_unused_bgs_mutex
Fix this by not taking the cleaner_mutex before calling
btrfs_delete_unused_bgs() because it's no longer needed after
commit 67c5e7d464 ("Btrfs: fix race between balance and unused block
group deletion"). The mutex fs_info->delete_unused_bgs_mutex, the
spinlock fs_info->unused_bgs_lock and a block group's spinlock are
enough to get correct serialization between tasks running relocation
and unused block group deletion (as well as between multiple tasks
concurrently calling btrfs_delete_unused_bgs()).
This issue was discussed (in the mailing list) during the review of
the patch titled "btrfs: explictly delete unused block groups in
close_ctree and ro-remount" and it was agreed that acquiring the
cleaner mutex had to be dropped after the patch titled
"Btrfs: fix race between balance and unused block group deletion"
got merged (both patches were submitted at about the same time, but
one landed in kernel 4.2 and the other in the 4.3 merge window).
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Commit 2e6e518335 ("Btrfs: fix block group ->space_info null pointer
dereference") accidently marked a space info as full when initializing
it with a value of 0 total bytes. This introduces an ENOSPC problem when
writing file data if we mount a filesystem that has no data block groups
allocated, because the data space info is initialized with 0 total bytes,
marked as full, and it never gets its total bytes incremented by a
(positive) value to unmark it as full (because there are no data block
groups loaded when the fs is mounted).
For metadata and system spaces this issue can never happen since we always
have at least one metadata block group and one system block group (even
for an empty filesystem).
So fix this by just not initializing a space info as full, reverting the
offending part of the commit mentioned above.
The following test case for fstests reproduces the issue:
seq=`basename $0`
seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
tmp=/tmp/$$
status=1 # failure is the default!
trap "_cleanup; exit \$status" 0 1 2 3 15
_cleanup()
{
rm -f $tmp.*
}
# get standard environment, filters and checks
. ./common/rc
. ./common/filter
# real QA test starts here
_need_to_be_root
_supported_fs btrfs
_supported_os Linux
_require_scratch
rm -f $seqres.full
_scratch_mkfs >>$seqres.full 2>&1
# Mount our filesystem without space caches enabled so that we do not
# get any space used from the initial data block group that mkfs creates
# (space caches used space from data block groups).
_scratch_mount "-o nospace_cache"
# Need an fs with at least 2Gb to make sure mkfs.btrfs does not create
# an fs using mixed block groups (used both for data and metadata). We
# really need to have dedicated block groups for data to reproduce the
# issue and mkfs.btrfs defaults to mixed block groups only for small
# filesystems (up to 1Gb).
_require_fs_space $SCRATCH_MNT $((2 * 1024 * 1024))
# Run balance with the purpose of deleting the unused data block group
# that mkfs created. We could also wait for the background kthread to
# automatically delete the unused block group, but we do not have a way
# to make it run and wait for it to complete, so just do a balance
# instead of some unreliable sleep
_run_btrfs_util_prog balance start -dusage=0 $SCRATCH_MNT
# Now unmount the filesystem, mount it again (either with or with space
# caches enabled, it does not matter to trigger the problem) and attempt
# to create a file with some data - this used to fail with ENOSPC
# because there were no data block groups when the filesystem was
# mounted and the data space info object was marked as full when
# initialized (because it had 0 total bytes), which prevented the file
# write path from attempting to allocate a data block group and fail
# immediately with ENOSPC.
_scratch_remount
echo "hello world" > $SCRATCH_MNT/foobar
echo "Silence is golden"
status=0
exit
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Pull vfs updates from Al Viro:
"In this one:
- d_move fixes (Eric Biederman)
- UFS fixes (me; locking is mostly sane now, a bunch of bugs in error
handling ought to be fixed)
- switch of sb_writers to percpu rwsem (Oleg Nesterov)
- superblock scalability (Josef Bacik and Dave Chinner)
- swapon(2) race fix (Hugh Dickins)"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (65 commits)
vfs: Test for and handle paths that are unreachable from their mnt_root
dcache: Reduce the scope of i_lock in d_splice_alias
dcache: Handle escaped paths in prepend_path
mm: fix potential data race in SyS_swapon
inode: don't softlockup when evicting inodes
inode: rename i_wb_list to i_io_list
sync: serialise per-superblock sync operations
inode: convert inode_sb_list_lock to per-sb
inode: add hlist_fake to avoid the inode hash lock in evict
writeback: plug writeback at a high level
change sb_writers to use percpu_rw_semaphore
shift percpu_counter_destroy() into destroy_super_work()
percpu-rwsem: kill CONFIG_PERCPU_RWSEM
percpu-rwsem: introduce percpu_rwsem_release() and percpu_rwsem_acquire()
percpu-rwsem: introduce percpu_down_read_trylock()
document rwsem_release() in sb_wait_write()
fix the broken lockdep logic in __sb_start_write()
introduce __sb_writers_{acquired,release}() helpers
ufs_inode_get{frag,block}(): get rid of 'phys' argument
ufs_getfrag_block(): tidy up a bit
...
Pull btrfs updates from Chris Mason:
"This has Jeff Mahoney's long standing trim patch that fixes corners
where trims were missing. Omar has some raid5/6 fixes, especially for
using scrub and device replace when devices are missing.
Zhao Lie continues cleaning and fixing things, this series fixes some
really hard to hit corners in xfstests. I had to pull it last merge
window due to some deadlocks, but those are now resolved.
I added support for Tejun's new blkio controllers. It seems to work
well for single devices, we'll expand to multi-device as well"
* 'for-linus-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: (47 commits)
btrfs: fix compile when block cgroups are not enabled
Btrfs: fix file read corruption after extent cloning and fsync
Btrfs: check if previous transaction aborted to avoid fs corruption
btrfs: use __GFP_NOFAIL in alloc_btrfs_bio
btrfs: Prevent from early transaction abort
btrfs: Remove unused arguments in tree-log.c
btrfs: Remove useless condition in start_log_trans()
Btrfs: add support for blkio controllers
Btrfs: remove unused mutex from struct 'btrfs_fs_info'
Btrfs: fix parity scrub of RAID 5/6 with missing device
Btrfs: fix device replace of a missing RAID 5/6 device
Btrfs: add RAID 5/6 BTRFS_RBIO_REBUILD_MISSING operation
Btrfs: count devices correctly in readahead during RAID 5/6 replace
Btrfs: remove misleading handling of missing device scrub
btrfs: fix clone / extent-same deadlocks
Btrfs: fix defrag to merge tail file extent
Btrfs: fix warning in backref walking
btrfs: Add WARN_ON() for double lock in btrfs_tree_lock()
btrfs: Remove root argument in extent_data_ref_count()
btrfs: Fix wrong comment of btrfs_alloc_tree_block()
...
Pull core block updates from Jens Axboe:
"This first core part of the block IO changes contains:
- Cleanup of the bio IO error signaling from Christoph. We used to
rely on the uptodate bit and passing around of an error, now we
store the error in the bio itself.
- Improvement of the above from myself, by shrinking the bio size
down again to fit in two cachelines on x86-64.
- Revert of the max_hw_sectors cap removal from a revision again,
from Jeff Moyer. This caused performance regressions in various
tests. Reinstate the limit, bump it to a more reasonable size
instead.
- Make /sys/block/<dev>/queue/discard_max_bytes writeable, by me.
Most devices have huge trim limits, which can cause nasty latencies
when deleting files. Enable the admin to configure the size down.
We will look into having a more sane default instead of UINT_MAX
sectors.
- Improvement of the SGP gaps logic from Keith Busch.
- Enable the block core to handle arbitrarily sized bios, which
enables a nice simplification of bio_add_page() (which is an IO hot
path). From Kent.
- Improvements to the partition io stats accounting, making it
faster. From Ming Lei.
- Also from Ming Lei, a basic fixup for overflow of the sysfs pending
file in blk-mq, as well as a fix for a blk-mq timeout race
condition.
- Ming Lin has been carrying Kents above mentioned patches forward
for a while, and testing them. Ming also did a few fixes around
that.
- Sasha Levin found and fixed a use-after-free problem introduced by
the bio->bi_error changes from Christoph.
- Small blk cgroup cleanup from Viresh Kumar"
* 'for-4.3/core' of git://git.kernel.dk/linux-block: (26 commits)
blk: Fix bio_io_vec index when checking bvec gaps
block: Replace SG_GAPS with new queue limits mask
block: bump BLK_DEF_MAX_SECTORS to 2560
Revert "block: remove artifical max_hw_sectors cap"
blk-mq: fix race between timeout and freeing request
blk-mq: fix buffer overflow when reading sysfs file of 'pending'
Documentation: update notes in biovecs about arbitrarily sized bios
block: remove bio_get_nr_vecs()
fs: use helper bio_add_page() instead of open coding on bi_io_vec
block: kill merge_bvec_fn() completely
md/raid5: get rid of bio_fits_rdev()
md/raid5: split bio for chunk_aligned_read
block: remove split code in blkdev_issue_{discard,write_same}
btrfs: remove bio splitting and merge_bvec_fn() calls
bcache: remove driver private bio splitting code
block: simplify bio_add_page()
block: make generic_make_request handle arbitrarily sized bios
blk-cgroup: Drop unlikely before IS_ERR(_OR_NULL)
block: don't access bio->bi_error after bio_put()
block: shrink struct bio down to 2 cache lines again
...
We need not check path before btrfs_free_path() is called because
path is checked in btrfs_free_path().
Signed-off-by: Tsutomu Itoh <t-itoh@jp.fujitsu.com>
Reviewed-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
At initializing time, for threshold-able workqueue, it's max_active
of kernel workqueue should be 1 and grow if it hits threshold.
But due to the bad naming, there is both 'max_active' for kernel
workqueue and btrfs workqueue.
So wrong value is given at workqueue initialization.
This patch fixes it, and to avoid further misunderstanding, change the
member name of btrfs_workqueue to 'current_active' and 'limit_active'.
Also corresponding comment is added for readability.
Reported-by: Alex Lyakas <alex.btrfs@zadarastorage.com>
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
num_tolerated_disk_barrier_failures in btrfs_balance
Code for updating fs_info->num_tolerated_disk_barrier_failures in
btrfs_balance() lacks raid56 support.
Reason:
Above code was wroten in 2012-08-01, together with
btrfs_calc_num_tolerated_disk_barrier_failures()'s first version.
Then, btrfs_calc_num_tolerated_disk_barrier_failures() got updated
later to support raid56, but code in btrfs_balance() was not
updated together.
Fix:
Merge above similar code to a common function:
btrfs_get_num_tolerated_disk_barrier_failures()
and make it support both case.
It can fix this bug with a bonus of cleanup, and make these code
never in above no-sync state from now on.
Suggested-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
1: Use ARRAY_SIZE(types) to replace a static-value variant:
int num_types = 4;
2: Use 'continue' on condition to reduce one level tab
if (!XXX) {
code;
...
}
->
if (XXX)
continue;
code;
...
3: Put setting 'num_tolerated_disk_barrier_failures = 2' to
(num_tolerated_disk_barrier_failures > 2) condition to make
make logic neat.
if (num_tolerated_disk_barrier_failures > 0 && XXX)
num_tolerated_disk_barrier_failures = 0;
else if (num_tolerated_disk_barrier_failures > 1) {
if (XXX)
num_tolerated_disk_barrier_failures = 1;
else if (XXX)
num_tolerated_disk_barrier_failures = 2;
->
if (num_tolerated_disk_barrier_failures > 0 && XXX)
num_tolerated_disk_barrier_failures = 0;
if (num_tolerated_disk_barrier_failures > 1 && XXX)
num_tolerated_disk_barrier_failures = ;
if (num_tolerated_disk_barrier_failures > 2 && XXX)
num_tolerated_disk_barrier_failures = 2;
4: Remove comment of:
num_mirrors - 1: if RAID1 or RAID10 is configured and more
than 2 mirrors are used.
which is not fit with code.
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
These variables are not used from introduced version, remove them.
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
bio->bi_css and bio->bi_ioc don't exist when block cgroups are not on.
This adds an ifdef around them. It's not perfect, but our
use of bi_ioc is being removed in the 4.3 merge window.
The bi_css usage really should go into bio_clone, but I want to make
sure that doesn't introduce problems for other bio_clone use cases.
Signed-off-by: Chris Mason <clm@fb.com>
If we partially clone one extent of a file into a lower offset of the
file, fsync the file, power fail and then mount the fs to trigger log
replay, we can get multiple checksum items in the csum tree that overlap
each other and result in checksum lookup failures later. Those failures
can make file data read requests assume a checksum value of 0, but they
will not return an error (-EIO for example) to userspace exactly because
the expected checksum value 0 is a special value that makes the read bio
endio callback return success and set all the bytes of the corresponding
page with the value 0x01 (at fs/btrfs/inode.c:__readpage_endio_check()).
From a userspace perspective this is equivalent to file corruption
because we are not returning what was written to the file.
Details about how this can happen, and why, are included inline in the
following reproducer test case for fstests and the comment added to
tree-log.c.
seq=`basename $0`
seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
tmp=/tmp/$$
status=1 # failure is the default!
trap "_cleanup; exit \$status" 0 1 2 3 15
_cleanup()
{
_cleanup_flakey
rm -f $tmp.*
}
# get standard environment, filters and checks
. ./common/rc
. ./common/filter
. ./common/dmflakey
# real QA test starts here
_need_to_be_root
_supported_fs btrfs
_supported_os Linux
_require_scratch
_require_dm_flakey
_require_cloner
_require_metadata_journaling $SCRATCH_DEV
rm -f $seqres.full
_scratch_mkfs >>$seqres.full 2>&1
_init_flakey
_mount_flakey
# Create our test file with a single 100K extent starting at file
# offset 800K. We fsync the file here to make the fsync log tree gets
# a single csum item that covers the whole 100K extent, which causes
# the second fsync, done after the cloning operation below, to not
# leave in the log tree two csum items covering two sub-ranges
# ([0, 20K[ and [20K, 100K[)) of our extent.
$XFS_IO_PROG -f -c "pwrite -S 0xaa 800K 100K" \
-c "fsync" \
$SCRATCH_MNT/foo | _filter_xfs_io
# Now clone part of our extent into file offset 400K. This adds a file
# extent item to our inode's metadata that points to the 100K extent
# we created before, using a data offset of 20K and a data length of
# 20K, so that it refers to the sub-range [20K, 40K[ of our original
# extent.
$CLONER_PROG -s $((800 * 1024 + 20 * 1024)) -d $((400 * 1024)) \
-l $((20 * 1024)) $SCRATCH_MNT/foo $SCRATCH_MNT/foo
# Now fsync our file to make sure the extent cloning is durably
# persisted. This fsync will not add a second csum item to the log
# tree containing the checksums for the blocks in the sub-range
# [20K, 40K[ of our extent, because there was already a csum item in
# the log tree covering the whole extent, added by the first fsync
# we did before.
$XFS_IO_PROG -c "fsync" $SCRATCH_MNT/foo
echo "File digest before power failure:"
md5sum $SCRATCH_MNT/foo | _filter_scratch
# Silently drop all writes and ummount to simulate a crash/power
# failure.
_load_flakey_table $FLAKEY_DROP_WRITES
_unmount_flakey
# Allow writes again, mount to trigger log replay and validate file
# contents.
# The fsync log replay first processes the file extent item
# corresponding to the file offset 400K (the one which refers to the
# [20K, 40K[ sub-range of our 100K extent) and then processes the file
# extent item for file offset 800K. It used to happen that when
# processing the later, it erroneously left in the csum tree 2 csum
# items that overlapped each other, 1 for the sub-range [20K, 40K[ and
# 1 for the whole range of our extent. This introduced a problem where
# subsequent lookups for the checksums of blocks within the range
# [40K, 100K[ of our extent would not find anything because lookups in
# the csum tree ended up looking only at the smaller csum item, the
# one covering the subrange [20K, 40K[. This made read requests assume
# an expected checksum with a value of 0 for those blocks, which caused
# checksum verification failure when the read operations finished.
# However those checksum failure did not result in read requests
# returning an error to user space (like -EIO for e.g.) because the
# expected checksum value had the special value 0, and in that case
# btrfs set all bytes of the corresponding pages with the value 0x01
# and produce the following warning in dmesg/syslog:
#
# "BTRFS warning (device dm-0): csum failed ino 257 off 917504 csum\
# 1322675045 expected csum 0"
#
_load_flakey_table $FLAKEY_ALLOW_WRITES
_mount_flakey
echo "File digest after log replay:"
# Must match the same digest he had after cloning the extent and
# before the power failure happened.
md5sum $SCRATCH_MNT/foo | _filter_scratch
_unmount_flakey
status=0
exit
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Chris Mason <clm@fb.com>
While we are committing a transaction, it's possible the previous one is
still finishing its commit and therefore we wait for it to finish first.
However we were not checking if that previous transaction ended up getting
aborted after we waited for it to commit, so we ended up committing the
current transaction which can lead to fs corruption because the new
superblock can point to trees that have had one or more nodes/leafs that
were never durably persisted.
The following sequence diagram exemplifies how this is possible:
CPU 0 CPU 1
transaction N starts
(...)
btrfs_commit_transaction(N)
cur_trans->state = TRANS_STATE_COMMIT_START;
(...)
cur_trans->state = TRANS_STATE_COMMIT_DOING;
(...)
cur_trans->state = TRANS_STATE_UNBLOCKED;
root->fs_info->running_transaction = NULL;
btrfs_start_transaction()
--> starts transaction N + 1
btrfs_write_and_wait_transaction(trans, root);
--> starts writing all new or COWed ebs created
at transaction N
creates some new ebs, COWs some
existing ebs but doesn't COW or
deletes eb X
btrfs_commit_transaction(N + 1)
(...)
cur_trans->state = TRANS_STATE_COMMIT_START;
(...)
wait_for_commit(root, prev_trans);
--> prev_trans == transaction N
btrfs_write_and_wait_transaction() continues
writing ebs
--> fails writing eb X, we abort transaction N
and set bit BTRFS_FS_STATE_ERROR on
fs_info->fs_state, so no new transactions
can start after setting that bit
cleanup_transaction()
btrfs_cleanup_one_transaction()
wakes up task at CPU 1
continues, doesn't abort because
cur_trans->aborted (transaction N + 1)
is zero, and no checks for bit
BTRFS_FS_STATE_ERROR in fs_info->fs_state
are made
btrfs_write_and_wait_transaction(trans, root);
--> succeeds, no errors during writeback
write_ctree_super(trans, root, 0);
--> succeeds
--> we have now a superblock that points us
to some root that uses eb X, which was
never written to disk
In this scenario future attempts to read eb X from disk results in an
error message like "parent transid verify failed on X wanted Y found Z".
So fix this by aborting the current transaction if after waiting for the
previous transaction we verify that it was aborted.
Cc: stable@vger.kernel.org
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Chris Mason <clm@fb.com>
alloc_btrfs_bio relies on GFP_NOFS allocation when committing the
transaction but this allocation context is rather weak wrt. reclaim
capabilities. The page allocator currently tries hard to not fail these
allocations if they are small (<=PAGE_ALLOC_COSTLY_ORDER) but it can
still fail if the _current_ process is the OOM killer victim. Moreover
there is an attempt to move away from the default no-fail behavior and
allow these allocation to fail more eagerly. This would lead to:
[ 37.928625] kernel BUG at fs/btrfs/extent_io.c:4045
which is clearly undesirable and the nofail behavior should be explicit
if the allocation failure cannot be tolerated.
Signed-off-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
Following arguments are not used in tree-log.c:
insert_one_name(): path, type
wait_log_commit(): trans
wait_for_writer(): trans
This patch remove them.
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
Dan Carpenter <dan.carpenter@oracle.com> reported a smatch warning
for start_log_trans():
fs/btrfs/tree-log.c:178 start_log_trans()
warn: we tested 'root->log_root' before and it was 'false'
fs/btrfs/tree-log.c
147 if (root->log_root) {
We test "root->log_root" here.
...
Reason:
Condition of:
fs/btrfs/tree-log.c:178: if (!root->log_root) {
is not necessary after commit: 7237f1833
It caused a smatch warning, and no functionally error.
Fix:
Deleting above condition will make smatch shut up,
but a better way is to do cleanup for start_log_trans()
to remove duplicated code and make code more readable.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
Preparation to hide the sb->s_writers internals from xfs and btrfs.
Add 2 trivial define's they can use rather than play with ->s_writers
directly. No changes in btrfs/transaction.o and xfs/xfs_aops.o.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Jan Kara <jack@suse.com>
We can always fill up the bio now, no need to estimate the possible
size based on queue parameters.
Acked-by: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
[hch: rebased and wrote a changelog]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lin <ming.l@ssi.samsung.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Btrfs has been doing bio splitting from btrfs_map_bio(), by checking
device limits as well as calling ->merge_bvec_fn() etc. That is not
necessary any more, because generic_make_request() is now able to
handle arbitrarily sized bios. So clean up unnecessary code paths.
Cc: Chris Mason <clm@fb.com>
Cc: Josef Bacik <jbacik@fb.com>
Cc: linux-btrfs@vger.kernel.org
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Chris Mason <clm@fb.com>
[dpark: add more description in commit message]
Signed-off-by: Dongsu Park <dpark@posteo.net>
Signed-off-by: Ming Lin <ming.l@ssi.samsung.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
This attaches accounting information to bios as we submit them so the
new blkio controllers can throttle on btrfs filesystems.
Not much is required, we're just associating bios with blkcgs during clone,
calling wbc_init_bio()/wbc_account_io() during writepages submission,
and attaching the bios to the current context during direct IO.
Finally if we are splitting bios during btrfs_map_bio, this attaches
accounting information to the split.
The end result is able to throttle nicely on single disk filesystems. A
little more work is required for multi-device filesystems.
Signed-off-by: Chris Mason <clm@fb.com>
The code using 'ordered_extent_flush_mutex' mutex has removed by below
commit.
- 8d875f95da
btrfs: disable strict file flushes for renames and truncates
But the mutex still lives in struct 'btrfs_fs_info'.
So, this patch removes the mutex from struct 'btrfs_fs_info' and its
initialization code.
Signed-off-by: Byongho Lee <bhlee.kernel@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
When testing the previous patch, Zhao Lei reported a similar bug when
attempting to scrub a degraded RAID 5/6 filesystem with a missing
device, leading to NULL pointer dereferences from the RAID 5/6 parity
scrubbing code.
The first cause was the same as in the previous patch: attempting to
call bio_add_page() on a missing block device. To fix this,
scrub_extent_for_parity() can just mark the sectors on the missing
device as errors instead of attempting to read from it.
Additionally, the code uses scrub_remap_extent() to map the extent of
the corresponding data stripe, but the extent wasn't already mapped. If
scrub_remap_extent() finds a missing block device, it doesn't initialize
extent_dev, so we're left with a NULL struct btrfs_device. The solution
is to use btrfs_map_block() directly.
Reported-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
The original implementation of device replace on RAID 5/6 seems to have
missed support for replacing a missing device. When this is attempted,
we end up calling bio_add_page() on a bio with a NULL ->bi_bdev, which
crashes when we try to dereference it. This happens because
btrfs_map_block() has no choice but to return us the missing device
because RAID 5/6 don't have any alternate mirrors to read from, and a
missing device has a NULL bdev.
The idea implemented here is to handle the missing device case
separately, which better only happen when we're replacing a missing RAID
5/6 device. We use the new BTRFS_RBIO_REBUILD_MISSING operation to
reconstruct the data from parity, check it with
scrub_recheck_block_checksum(), and write it out with
scrub_write_block_to_dev_replace().
Reported-by: Philip <bugzilla@philip-seeger.de>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=96141
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
The current RAID 5/6 recovery code isn't quite prepared to handle
missing devices. In particular, it expects a bio that we previously
attempted to use in the read path, meaning that it has valid pages
allocated. However, missing devices have a NULL blkdev, and we can't
call bio_add_page() on a bio with a NULL blkdev. We could do manual
manipulation of bio->bi_io_vec, but that's pretty gross. So instead, add
a separate path that allows us to manually add pages to the rbio.
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
Commit 5fbc7c59fd ("Btrfs: fix unfinished readahead thread for raid5/6
degraded mounting") fixed a problem where we would skip a missing device
when we shouldn't have because there are no other mirrors to read from
in RAID 5/6. After commit 2c8cdd6ee4 ("Btrfs, replace: write dirty
pages into the replace target device"), the fix doesn't work when we're
doing a missing device replace on RAID 5/6 because the replace device is
counted as a mirror so we're tricked into thinking we can safely skip
the missing device. The fix is to count only the real stripes and decide
based on that.
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
scrub_submit() claims that it can handle a bio with a NULL block device,
but this is misleading, as calling bio_add_page() on a bio with a NULL
->bi_bdev would've already crashed. Delete this, as we're about to
properly handle a missing block device.
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
Clone and extent same lock their source and target inodes in opposite order.
In addition to this, the range locking in clone doesn't take ordering into
account. Fix this by having clone use the same locking helpers as
btrfs-extent-same.
In addition, I do a small cleanup of the locking helpers, removing a case
(both inodes being the same) which was poorly accounted for and never
actually used by the callers.
Signed-off-by: Mark Fasheh <mfasheh@suse.de>
Reviewed-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
The file layout is
[extent 1]...[extent n][4k extent][HOLE][extent x]
extent 1~n and 4k extent can be merged during defrag, and the whole
defrag bytes is larger than our defrag thresh(256k), 4k extent as a
tail is left unmerged since we check if its next extent can be merged
(the next one is a hole, so the check will fail), the layout thus can
be
[new extent][4k extent][HOLE][extent x]
(1~n)
To fix it, beside looking at the next one, this also looks at the
previous one by checking @defrag_end, which is set to 0 when we
decide to stop merging contiguous extents, otherwise, we can merge
the previous one with our extent.
Also, this makes btrfs behave consistent with how xfs and ext4 do.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Chris Mason <clm@fb.com>
When we do backref walking, we search firstly in queued delayed refs
and then the on-disk backrefs, but we parse differently for shared
references, for delayed refs we also add 'ref->root' while for on-disk
backrefs we don't, this can prevent us from merging refs indexed
by the same bytenr and cause find_parent_nodes() to throw a warning at
'WARN_ON(ref->count < 0)', for example, when we have a shared data extent
with 'ref_cnt=1' and a delayed shared data with a BTRFS_DROP_DELAYED_REF,
that happens.
For shared references, no matter if it's delayed or on-disk, ref->root is
not at all used, instead it's ref->parent that really matters, so this has
delayed refs handled as the same way as on-disk refs.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Chris Mason <clm@fb.com>
When a task trying to double lock a extent buffer, there are no
lockdep warning about it because this lock may be in "blocking_lock"
state, and make us hard to debug.
This patch add a WARN_ON() for above condition, it can not report
all deadlock cases(as lock between tasks), but at least helps us
some.
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
These wrong comment was copyed from another function(expired) from
init, this patch fixed them.
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
When btrfs_reloc_cow_block() failed in __btrfs_cow_block(), current
code just return a err-value to caller, but leave new_created extent
buffer exist and locked.
Then subsequent code (in relocate) try to lock above eb again,
and caused deadlock without any dmesg.
(eb lock use wait_event(), so no lockdep message)
It is hard to do recover work in __btrfs_cow_block() at this error
point, but we can abort transaction to avoid deadlock and operate on
unstable state.a
It also helps developer to find wrong place quickly.
(better than a frozen fs without any dmesg before patch)
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
These arguments are not used in functions, remove them for cleanup
and make kernel stack happy.
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
Remove chunk_objectid argument from btrfs_relocate_chunk() because
it is not necessary, it can also cleanup some code in caller for
prepare its value.
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
objectid's init-value is not used in any case, remove it.
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
We need error checking code for get_ref_objectid_v0() in
relocate_block_group(), to avoid unpredictable result, especially
for accessing uninitialized value(when function failed) after
this line.
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
xfstests btrfs/070 sometimes failed.
In my test machine, its fail rate is about 30%.
In another vm(vmware), its fail rate is about 50%.
Reason:
btrfs/070 do replace and defrag with fsstress simultaneously,
after above operation, checksum error is found by scrub.
Actually, it have no relationship with defrag operation, only
replace with fsstress can trigger this bug.
New data writen to target device have possibility rewrited by
old data from source device by replace code in debug, to avoid
above problem, we can set target block group to readonly in
replace period, so new data requested by other operation will
not write to same place with replace code.
Before patch(4.1-rc3):
30% failed in 100 xfstests.
After patch:
0% failed in 300 xfstests.
It also happened in btrfs/071 as it's another scrub with IO load tests.
Reported-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
Use new intruduced scrub_pause_on/off() can make this code block
clean and more readable.
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
It can reduce current duplicated code which is similar to
scrub_blocked_if_needed() but can not call it because little
different.
It also used by my next patch which is in same case.
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
More than one code call set_block_group_ro() and restore rw in fail.
Old code use bool bit to save blockgroup's ro state, it can not
support parallel case(it is confirmd exist in my debug log).
This patch use ref count to store ro state, and rename
set_block_group_ro/set_block_group_rw
to
inc_block_group_ro/dec_block_group_ro.
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
When we access extent_root in scrub_stripe() and
scrub_raid56_parity(), we need bypass unrelated tree item firstly
before using its contents to do other condition.
It is not a bug fix, only making code sequence in logic.
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
We need not load csum of whole strip in scrub because strip is trimed
before use, it is to say, what we really need to calculate csum is
data between [extent_logical, extent_len).
This patch changed to use above segment for btrfs_lookup_csums_range()
in scrub_stripe()
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
For example, in scrub_raid56_parity(), following lines are used
to judge is all data processed:
place1: if (key.objectid > logic_end) ...
place2: if (logic_start >= logic_end) ...
...
(place2 is typo, is should be ">", it is copied from other
place, where logic_end's meaning is different, long story...)
We can fix above typo directly, but the root reason is ambiguous
meaning of logic_end in scrub raid56 parity.
In other place, XXX_end is pointed to data which is not included,
and we need to process segment of [XXX_start, XXX_end).
But for scrub raid56 parity, logic_end is pointed to lattest data
need to process, and introduced many "+ 1" and "- 1" in code as
below:
length = sparity->logic_end - sparity->logic_start + 1
logic_end - logic_start + 1
stripe_logical + increment - 1
This patch changed logic_end's meaning to make it in normal understanding
in raid56 parity functions and data struct alone with above bugfix.
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
When scrub_extent() failed, we need to free previois created
checksum list.
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
Old code checking cancel and pause request inside scrub stripe
operation, like:
loop() {
if (parity) {
scrub_parity_stripe();
continue;
}
check_cancel_and_pause()
scrub_normal_stripe();
}
Reason is when introduce raid56 stripe scrub, new code is inserted
simplely to front of loop.
Better to:
loop() {
check_cancel_and_pause()
if (parity)
scrub_parity_stripe();
else
scrub_normal_stripe();
}
This patch adjusted code place to realize above sequence.
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
When mount failed because missing device, we can see following
dmesg:
[ 1060.267743] BTRFS: too many missing devices, writeable mount is not allowed
[ 1060.273158] BTRFS: open_ctree failed
This patch add missing_device_number and tolerated_missing_device_number
to above output, to let user know what really happened, and helps
bug-report and debug.
dmesg after patch:
[ 127.050367] BTRFS: missing devices(1) exceeds the limit(0), writeable mount is not allowed
[ 127.056099] BTRFS: open_ctree failed
Changelog v1->v2:
1: Changed to more clear description, suggested-by:
Anand Jain <anand.jain@oracle.com>
Suggested-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Chris Mason <clm@fb.com>
Scrub panic in following operation:
mkfs.ext4 /dev/vdh
btrfs-convert /dev/vdh
mount /dev/vdh /mnt/tmp1
btrfs scrub start -B /dev/vdh
(panic)
Reason:
1: In some case, leaf created by btrfs-convert was splited into 2
strips.
2: Scrub bypassed part of above wrong leaf data, but remain data
caused panic in scrub_checksum_tree_block().
For reason 1:
we can get following information after some simple operation.
a. mkfs.ext4 /dev/vdh
btrfs-convert /dev/vdh
b. btrfs-debug-tree /dev/vdh
we can see following item in extent tree:
item 25 key (27054080 METADATA_ITEM 0) itemoff 15083 itemsize 33
Its logical address is [27054080, 27070464)
and acrossed 2 strips:
[27000832, 27066368)
[27066368, 27131904)
Will be fixed in btrfs-progs(btrfs-convert, btrfsck, ...)
For reason 2:
Scrub is trying to do a "bypass" in this case, but the result is
"panic", because current code lacks of some condition in bypass,
and let some wrong leaf data escaped.
This patch fixed above scrub code.
Before patch:
# btrfs scrub start -B /dev/vdh
(panic)
After patch:
# btrfs scrub start -B /dev/vdh
scrub done for 353cec8f-da31-4a94-aa35-be72d997b06e
...
# dmesg
...
[ 59.088697] BTRFS error (device vdh): scrub: tree block 27054080 spanning stripes, ignored. logical=27000832
[ 59.089929] BTRFS error (device vdh): scrub: tree block 27054080 spanning stripes, ignored. logical=27066368
#
Reported-by: Chris Murphy <lists@colorremedies.com>
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
We have one more case where after a log tree is replayed we get
inconsistent metadata leading to stale directory entries, due to
some directories having entries pointing to some inode while the
inode does not have a matching BTRFS_INODE_[REF|EXTREF]_KEY item.
To trigger the problem we need to have a file with multiple hard links
belonging to different parent directories. Then if one of those hard
links is removed and we fsync the file using one of its other links
that belongs to a different parent directory, we end up not logging
the fact that the removed hard link doesn't exists anymore in the
parent directory.
Simple reproducer:
seq=`basename $0`
seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
tmp=/tmp/$$
status=1 # failure is the default!
trap "_cleanup; exit \$status" 0 1 2 3 15
_cleanup()
{
_cleanup_flakey
rm -f $tmp.*
}
# get standard environment, filters and checks
. ./common/rc
. ./common/filter
. ./common/dmflakey
# real QA test starts here
_need_to_be_root
_supported_fs generic
_supported_os Linux
_require_scratch
_require_dm_flakey
_require_metadata_journaling $SCRATCH_DEV
rm -f $seqres.full
_scratch_mkfs >>$seqres.full 2>&1
_init_flakey
_mount_flakey
# Create our test directory and file.
mkdir $SCRATCH_MNT/testdir
touch $SCRATCH_MNT/foo
ln $SCRATCH_MNT/foo $SCRATCH_MNT/testdir/foo2
ln $SCRATCH_MNT/foo $SCRATCH_MNT/testdir/foo3
# Make sure everything done so far is durably persisted.
sync
# Now we remove one of our file's hardlinks in the directory testdir.
unlink $SCRATCH_MNT/testdir/foo3
# We now fsync our file using the "foo" link, which has a parent that
# is not the directory "testdir".
$XFS_IO_PROG -c "fsync" $SCRATCH_MNT/foo
# Silently drop all writes and unmount to simulate a crash/power
# failure.
_load_flakey_table $FLAKEY_DROP_WRITES
_unmount_flakey
# Allow writes again, mount to trigger journal/log replay.
_load_flakey_table $FLAKEY_ALLOW_WRITES
_mount_flakey
# After the journal/log is replayed we expect to not see the "foo3"
# link anymore and we should be able to remove all names in the
# directory "testdir" and then remove it (no stale directory entries
# left after the journal/log replay).
echo "Entries in testdir:"
ls -1 $SCRATCH_MNT/testdir
rm -f $SCRATCH_MNT/testdir/*
rmdir $SCRATCH_MNT/testdir
_unmount_flakey
status=0
exit
The test fails with:
$ ./check generic/107
FSTYP -- btrfs
PLATFORM -- Linux/x86_64 debian3 4.1.0-rc6-btrfs-next-11+
MKFS_OPTIONS -- /dev/sdc
MOUNT_OPTIONS -- /dev/sdc /home/fdmanana/btrfs-tests/scratch_1
generic/107 3s ... - output mismatch (see .../results/generic/107.out.bad)
--- tests/generic/107.out 2015-08-01 01:39:45.807462161 +0100
+++ /home/fdmanana/git/hub/xfstests/results//generic/107.out.bad
@@ -1,3 +1,5 @@
QA output created by 107
Entries in testdir:
foo2
+foo3
+rmdir: failed to remove '/home/fdmanana/btrfs-tests/scratch_1/testdir': Directory not empty
...
_check_btrfs_filesystem: filesystem on /dev/sdc is inconsistent \
(see /home/fdmanana/git/hub/xfstests/results//generic/107.full)
_check_dmesg: something found in dmesg (see .../results/generic/107.dmesg)
Ran: generic/107
Failures: generic/107
Failed 1 of 1 tests
$ cat /home/fdmanana/git/hub/xfstests/results//generic/107.full
(...)
checking fs roots
root 5 inode 257 errors 200, dir isize wrong
unresolved ref dir 257 index 3 namelen 4 name foo3 filetype 1 errors 5, no dir item, no inode ref
(...)
And produces the following warning in dmesg:
[127298.759064] BTRFS info (device dm-0): failed to delete reference to foo3, inode 258 parent 257
[127298.762081] ------------[ cut here ]------------
[127298.763311] WARNING: CPU: 10 PID: 7891 at fs/btrfs/inode.c:3956 __btrfs_unlink_inode+0x182/0x35a [btrfs]()
[127298.767327] BTRFS: Transaction aborted (error -2)
(...)
[127298.788611] Call Trace:
[127298.789137] [<ffffffff8145f077>] dump_stack+0x4f/0x7b
[127298.790090] [<ffffffff81095de5>] ? console_unlock+0x356/0x3a2
[127298.791157] [<ffffffff8104b3b0>] warn_slowpath_common+0xa1/0xbb
[127298.792323] [<ffffffffa065ad09>] ? __btrfs_unlink_inode+0x182/0x35a [btrfs]
[127298.793633] [<ffffffff8104b410>] warn_slowpath_fmt+0x46/0x48
[127298.794699] [<ffffffffa065ad09>] __btrfs_unlink_inode+0x182/0x35a [btrfs]
[127298.797640] [<ffffffffa065be8f>] btrfs_unlink_inode+0x1e/0x40 [btrfs]
[127298.798876] [<ffffffffa065bf11>] btrfs_unlink+0x60/0x9b [btrfs]
[127298.800154] [<ffffffff8116fb48>] vfs_unlink+0x9c/0xed
[127298.801303] [<ffffffff81173481>] do_unlinkat+0x12b/0x1fb
[127298.802450] [<ffffffff81253855>] ? lockdep_sys_exit_thunk+0x12/0x14
[127298.803797] [<ffffffff81174056>] SyS_unlinkat+0x29/0x2b
[127298.805017] [<ffffffff81465197>] system_call_fastpath+0x12/0x6f
[127298.806310] ---[ end trace bbfddacb7aaada7b ]---
[127298.807325] BTRFS warning (device dm-0): __btrfs_unlink_inode:3956: Aborting unused transaction(No such entry).
So fix this by logging all parent inodes, current and old ones, to make
sure we do not get stale entries after log replay. This is not a simple
solution such as triggering a full transaction commit because it would
imply full transaction commit when an inode is fsynced in the same
transaction that modified it and reloaded it after eviction (because its
last_unlink_trans is set to the same value as its last_trans as of the
commit with the title "Btrfs: fix stale dir entries after unlink, inode
eviction and fsync"), and it would also make fstest generic/066 fail
since one of the fsyncs triggers a full commit and the next fsync will
not find the inode in the log anymore (therefore not removing the xattr).
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
The search key advancing condition used in copy_to_sk() is loose. It can
advance the key even if it reaches sk->max_*: e.g. when the max key = (512,
1024, -1) and the current key = (512, 1025, 10), it increments the
offset by 1, continues hopeless search from (512, 1025, 11). This issue
make ioctl() to take unexpectedly long time scanning all the leaf a blocks
one by one.
This commit fix the problem using standard way of key comparison:
btrfs_comp_cpu_keys()
Signed-off-by: Naohiro Aota <naota@elisp.net>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
When cloning/deduplicating file extents (through the clone and extent_same
ioctls) we can get data back references with offset values that are a
result of an unsigned integer arithmetic underflow, that is, values that
are much larger then they could be otherwise.
This is not a problem when decrementing or dropping the back references
(happens when we overwrite the extents or punch a hole for example, through
__btrfs_drop_extents()), since we compute the same too large offset value,
but it is a problem for the backref walking code, used by an incremental
send and the ioctls that are used by the btrfs tool "inspect-internal"
commands, as it makes it miss the corresponding file extent items because
the search key is set for an extent item that starts at an offset matching
the exceptionally large offset value of the data back reference. For an
incremental send this causes the send ioctl to fail with -EIO.
So teach the backref walking code to deal with these cases by setting the
search key's offset to 0 if the backref's offset value is larger than
LLONG_MAX (the largest possible file offset). This makes sure the backref
walking code finds the corresponding file extent items at the expense of
scanning more items and leafs in the btree.
Fixing the clone/dedup ioctls to not produce such underflowed results would
require major changes breaking backward compatibility, updating user space
tools, etc.
Simple reproducer case for fstests:
seq=`basename $0`
seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
tmp=/tmp/$$
status=1 # failure is the default!
trap "_cleanup; exit \$status" 0 1 2 3 15
_cleanup()
{
rm -fr $send_files_dir
rm -f $tmp.*
}
# get standard environment, filters and checks
. ./common/rc
. ./common/filter
# real QA test starts here
_supported_fs btrfs
_supported_os Linux
_require_scratch
_require_cloner
_need_to_be_root
send_files_dir=$TEST_DIR/btrfs-test-$seq
rm -f $seqres.full
rm -fr $send_files_dir
mkdir $send_files_dir
_scratch_mkfs >>$seqres.full 2>&1
_scratch_mount
# Create our test file with a single extent of 64K starting at file
# offset 128K.
$XFS_IO_PROG -f -c "pwrite -S 0xaa 128K 64K" $SCRATCH_MNT/foo \
| _filter_xfs_io
_run_btrfs_util_prog subvolume snapshot -r $SCRATCH_MNT \
$SCRATCH_MNT/mysnap1
# Now clone parts of the original extent into lower offsets of the file.
#
# The first clone operation adds a file extent item to file offset 0
# that points to our initial extent with a data offset of 16K. The
# corresponding data back reference in the extent tree has an offset of
# 18446744073709535232, which is the result of file_offset - data_offset
# = 0 - 16K.
#
# The second clone operation adds a file extent item to file offset 16K
# that points to our initial extent with a data offset of 48K. The
# corresponding data back reference in the extent tree has an offset of
# 18446744073709518848, which is the result of file_offset - data_offset
# = 16K - 48K.
#
# Those large back reference offsets (result of unsigned arithmetic
# underflow) confused the back reference walking code (used by an
# incremental send and the multiple inspect-internal ioctls) and made it
# miss the back references, which for the case of an incremental send it
# made it fail with -EIO and print a message like the following to
# dmesg:
#
# "BTRFS error (device sdc): did not find backref in send_root. \
# inode=257, offset=0, disk_byte=12845056 found extent=12845056"
#
$CLONER_PROG -s $(((128 + 16) * 1024)) -d 0 -l $((16 * 1024)) \
$SCRATCH_MNT/foo $SCRATCH_MNT/foo
$CLONER_PROG -s $(((128 + 48) * 1024)) -d $((16 * 1024)) \
-l $((16 * 1024)) $SCRATCH_MNT/foo $SCRATCH_MNT/foo
_run_btrfs_util_prog subvolume snapshot -r $SCRATCH_MNT \
$SCRATCH_MNT/mysnap2
_run_btrfs_util_prog send $SCRATCH_MNT/mysnap1 -f $send_files_dir/1.snap
_run_btrfs_util_prog send -p $SCRATCH_MNT/mysnap1 $SCRATCH_MNT/mysnap2 \
-f $send_files_dir/2.snap
echo "File digest in the original filesystem:"
md5sum $SCRATCH_MNT/mysnap2/foo | _filter_scratch
# Now recreate the filesystem by receiving both send streams and verify
# we get the same file contents that the original filesystem had.
_scratch_unmount
_scratch_mkfs >>$seqres.full 2>&1
_scratch_mount
_run_btrfs_util_prog receive $SCRATCH_MNT -f $send_files_dir/1.snap
_run_btrfs_util_prog receive $SCRATCH_MNT -f $send_files_dir/2.snap
echo "File digest in the new filesystem:"
md5sum $SCRATCH_MNT/mysnap2/foo | _filter_scratch
status=0
exit
The test's expected golden output is:
wrote 65536/65536 bytes at offset 131072
XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
File digest in the original filesystem:
6c6079335cff141b8a31233ead04cbff SCRATCH_MNT/mysnap2/foo
File digest in the new filesystem:
6c6079335cff141b8a31233ead04cbff SCRATCH_MNT/mysnap2/foo
But it failed with:
(...)
@@ -1,7 +1,5 @@
QA output created by 097
wrote 65536/65536 bytes at offset 131072
XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
-File digest in the original filesystem:
-6c6079335cff141b8a31233ead04cbff SCRATCH_MNT/mysnap2/foo
-File digest in the new filesystem:
-6c6079335cff141b8a31233ead04cbff SCRATCH_MNT/mysnap2/foo
...
$ cat /home/fdmanana/git/hub/xfstests/results//btrfs/097.full
(...)
ERROR: send ioctl failed with -5: Input/output error
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
If we remove a hard link from an inode, the inode gets evicted, then
we fsync the inode and then power fail/crash, when the log tree is
replayed, the parent directory inode still has entries pointing to
the name that no longer exists, while our inode no longer has the
BTRFS_INODE_REF_KEY item matching the deleted hard link (as expected),
leaving the filesystem in an inconsistent state. The stale directory
entries can not be deleted (an attempt to delete them causes -ESTALE
errors), which makes it impossible to delete the parent directory.
This happens because we track the id of the transaction where the last
unlink operation for the inode happened (last_unlink_trans) in an
in-memory only field of the inode, that is, a value that is never
persisted in the inode item stored on the fs/subvol btree. So if an
inode is evicted and loaded again, the value for last_unlink_trans is
set to 0, which prevents the fsync from logging the parent directory
at btrfs_log_inode_parent(). So fix this by setting last_unlink_trans
to the id of the transaction that last modified the inode when we
load the inode. This is a pessimistic approach but it always ensures
correctness with the trade off of ocassional full transaction commits
when an fsync is done against the inode in the same transaction where
it was evicted and reloaded when our inode is a directory and often
logging its parent unnecessarily when our inode is not a directory.
The following test case for fstests triggers the problem:
seq=`basename $0`
seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
tmp=/tmp/$$
status=1 # failure is the default!
trap "_cleanup; exit \$status" 0 1 2 3 15
_cleanup()
{
_cleanup_flakey
rm -f $tmp.*
}
# get standard environment, filters and checks
. ./common/rc
. ./common/filter
. ./common/dmflakey
# real QA test starts here
_need_to_be_root
_supported_fs generic
_supported_os Linux
_require_scratch
_require_dm_flakey
_require_metadata_journaling $SCRATCH_DEV
rm -f $seqres.full
_scratch_mkfs >>$seqres.full 2>&1
_init_flakey
_mount_flakey
# Create our test file with 2 hard links.
mkdir $SCRATCH_MNT/testdir
touch $SCRATCH_MNT/testdir/foo
ln $SCRATCH_MNT/testdir/foo $SCRATCH_MNT/testdir/bar
# Make sure everything done so far is durably persisted.
sync
# Now remove one of the links, trigger inode eviction and then fsync
# our inode.
unlink $SCRATCH_MNT/testdir/bar
echo 2 > /proc/sys/vm/drop_caches
$XFS_IO_PROG -c "fsync" $SCRATCH_MNT/testdir/foo
# Silently drop all writes on our scratch device to simulate a power failure.
_load_flakey_table $FLAKEY_DROP_WRITES
_unmount_flakey
# Allow writes again and mount the fs to trigger log/journal replay.
_load_flakey_table $FLAKEY_ALLOW_WRITES
_mount_flakey
# Now verify our directory entries.
echo "Entries in testdir:"
ls -1 $SCRATCH_MNT/testdir
# If we remove our inode, its parent should become empty and therefore we should
# be able to remove the parent.
rm -f $SCRATCH_MNT/testdir/*
rmdir $SCRATCH_MNT/testdir
_unmount_flakey
# The fstests framework will call fsck against our filesystem which will verify
# that all metadata is in a consistent state.
status=0
exit
The test failed on btrfs with:
generic/098 4s ... - output mismatch (see /home/fdmanana/git/hub/xfstests/results//generic/098.out.bad)
--- tests/generic/098.out 2015-07-23 18:01:12.616175932 +0100
+++ /home/fdmanana/git/hub/xfstests/results//generic/098.out.bad 2015-07-23 18:04:58.924138308 +0100
@@ -1,3 +1,6 @@
QA output created by 098
Entries in testdir:
+bar
foo
+rm: cannot remove '/home/fdmanana/btrfs-tests/scratch_1/testdir/foo': Stale file handle
+rmdir: failed to remove '/home/fdmanana/btrfs-tests/scratch_1/testdir': Directory not empty
...
(Run 'diff -u tests/generic/098.out /home/fdmanana/git/hub/xfstests/results//generic/098.out.bad' to see the entire diff)
_check_btrfs_filesystem: filesystem on /dev/sdc is inconsistent (see /home/fdmanana/git/hub/xfstests/results//generic/098.full)
$ cat /home/fdmanana/git/hub/xfstests/results//generic/098.full
(...)
checking fs roots
root 5 inode 258 errors 2001, no inode item, link count wrong
unresolved ref dir 257 index 0 namelen 3 name foo filetype 1 errors 6, no dir index, no inode ref
unresolved ref dir 257 index 3 namelen 3 name bar filetype 1 errors 5, no dir item, no inode ref
Checking filesystem on /dev/sdc
(...)
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
We have another case where after an fsync log replay we get an inode with
a wrong link count (smaller than it should be) and a number of directory
entries greater than its link count. This happens when we add a new link
hard link to our inode A and then we fsync some other inode B that has
the side effect of logging the parent directory inode too. In this case
at log replay time we add the new hard link to our inode (the item with
key BTRFS_INODE_REF_KEY) when processing the parent directory but we
never adjust the link count of our inode A. As a result we get stale dir
entries for our inode A that can never be deleted and therefore it makes
it impossible to remove the parent directory (as its i_size can never
decrease back to 0).
A simple reproducer for fstests that triggers this issue:
seq=`basename $0`
seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
tmp=/tmp/$$
status=1 # failure is the default!
trap "_cleanup; exit \$status" 0 1 2 3 15
_cleanup()
{
_cleanup_flakey
rm -f $tmp.*
}
# get standard environment, filters and checks
. ./common/rc
. ./common/filter
. ./common/dmflakey
# real QA test starts here
_need_to_be_root
_supported_fs generic
_supported_os Linux
_require_scratch
_require_dm_flakey
_require_metadata_journaling $SCRATCH_DEV
rm -f $seqres.full
_scratch_mkfs >>$seqres.full 2>&1
_init_flakey
_mount_flakey
# Create our test directory and files.
mkdir $SCRATCH_MNT/testdir
touch $SCRATCH_MNT/testdir/foo
touch $SCRATCH_MNT/testdir/bar
# Make sure everything done so far is durably persisted.
sync
# Create one hard link for file foo and another one for file bar. After
# that fsync only the file bar.
ln $SCRATCH_MNT/testdir/bar $SCRATCH_MNT/testdir/bar_link
ln $SCRATCH_MNT/testdir/foo $SCRATCH_MNT/testdir/foo_link
$XFS_IO_PROG -c "fsync" $SCRATCH_MNT/testdir/bar
# Silently drop all writes on scratch device to simulate power failure.
_load_flakey_table $FLAKEY_DROP_WRITES
_unmount_flakey
# Allow writes again and mount the fs to trigger log/journal replay.
_load_flakey_table $FLAKEY_ALLOW_WRITES
_mount_flakey
# Now verify both our files have a link count of 2.
echo "Link count for file foo: $(stat --format=%h $SCRATCH_MNT/testdir/foo)"
echo "Link count for file bar: $(stat --format=%h $SCRATCH_MNT/testdir/bar)"
# We should be able to remove all the links of our files in testdir, and
# after that the parent directory should become empty and therefore
# possible to remove it.
rm -f $SCRATCH_MNT/testdir/*
rmdir $SCRATCH_MNT/testdir
_unmount_flakey
# The fstests framework will call fsck against our filesystem which will verify
# that all metadata is in a consistent state.
status=0
exit
The test fails with:
-Link count for file foo: 2
+Link count for file foo: 1
Link count for file bar: 2
+rm: cannot remove '/home/fdmanana/btrfs-tests/scratch_1/testdir/foo_link': Stale file handle
+rmdir: failed to remove '/home/fdmanana/btrfs-tests/scratch_1/testdir': Directory not empty
(...)
_check_btrfs_filesystem: filesystem on /dev/sdc is inconsistent
And fsck's output:
(...)
checking fs roots
root 5 inode 258 errors 2001, no inode item, link count wrong
unresolved ref dir 257 index 5 namelen 8 name foo_link filetype 1 errors 4, no inode ref
Checking filesystem on /dev/sdc
(...)
So fix this by marking inodes for link count fixup at log replay time
whenever a directory entry is replayed if the entry was created in the
transaction where the fsync was made and if it points to a non-directory
inode.
This isn't a new problem/regression, the issue exists for a long time,
possibly since the log tree feature was added (2008).
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
Pull btrfs fix from Chris Mason:
"We have a btrfs quota regression fix.
I merged this one on Thursday and have run it through tests against
current master.
Normally I wouldn't have sent this while you were finalizing rc6, but
I'm feeding mosquitoes in the adirondacks next week, so I wanted to
get this one out before leaving. I'll leave longer tests running and
check on things during the week, but I don't expect any problems"
* 'for-linus-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
btrfs: qgroup: Fix a regression in qgroup reserved space.
During the change to new btrfs extent-oriented qgroup implement, due to
it doesn't use the old __qgroup_excl_accounting() for exclusive extent,
it didn't free the reserved bytes.
The bug will cause limit function go crazy as the reserved space is
never freed, increasing limit will have no effect and still cause
EQOUT.
The fix is easy, just free reserved bytes for newly created exclusive
extent as what it does before.
Reported-by: Tsutomu Itoh <t-itoh@jp.fujitsu.com>
Signed-off-by: Yang Dongsheng <yangds.fnst@cn.fujitsu.com>
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
With well over 200+ users of this api, there are a mere 12 users that
actually checked the return value of this function. And all of them
really didn't do anything with that information as the system or module
was shutting down no matter what.
So stop pretending like it matters, and just return void from
misc_deregister(). If something goes wrong in the call, you will get a
WARNING splat in the syslog so you know how to fix up your driver.
Other than that, there's nothing that can go wrong.
Cc: Alasdair Kergon <agk@redhat.com>
Cc: Neil Brown <neilb@suse.com>
Cc: Oleg Drokin <oleg.drokin@intel.com>
Cc: Andreas Dilger <andreas.dilger@intel.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Wim Van Sebroeck <wim@iguana.be>
Cc: Christine Caulfield <ccaulfie@redhat.com>
Cc: David Teigland <teigland@redhat.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Acked-by: Joel Becker <jlbec@evilplan.org>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Alessandro Zummo <a.zummo@towertech.it>
Acked-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull btrfs fixes from Chris Mason:
"Filipe fixed up a hard to trigger ENOSPC regression from our merge
window pull, and we have a few other smaller fixes"
* 'for-linus-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
Btrfs: fix quick exhaustion of the system array in the superblock
btrfs: its btrfs_err() instead of btrfs_error()
btrfs: Avoid NULL pointer dereference of free_extent_buffer when read_tree_block() fail
btrfs: Fix lockdep warning of btrfs_run_delayed_iputs()
When we clear the dirty bits in btrfs_delete_unused_bgs for extents
in the empty block group, it results in btrfs_finish_extent_commit being
unable to discard the freed extents.
The block group removal patch added an alternate path to forget extents
other than btrfs_finish_extent_commit. As a result, any extents that
would be freed when the block group is removed aren't discarded. In my
test run, with a large copy of mixed sized files followed by removal, it
left nearly 2/3 of extents undiscarded.
To clean up the block groups, we add the removed block group onto a list
that will be discarded after transaction commit.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Tested-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
The cleaner thread may already be sleeping by the time we enter
close_ctree. If that's the case, we'll skip removing any unused
block groups queued for removal, even during a normal umount.
They'll be cleaned up automatically at next mount, but users
expect a umount to be a clean synchronization point, especially
when used on thin-provisioned storage with -odiscard. We also
explicitly remove unused block groups in the ro-remount path
for the same reason.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Tested-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
Since we now clean up block groups automatically as they become
empty, iterating over block groups is no longer sufficient to discard
unused space.
This patch iterates over the unused chunk space and discards any regions
that are unallocated, regardless of whether they were ever used. This is
a change for btrfs but is consistent with other file systems.
We do this in a transactionless manner since the discard process can take
a substantial amount of time and a transaction would need to be started
before the acquisition of the device list lock. That would mean a
transaction would be held open across /all/ of the discards collectively.
In order to prevent other threads from allocating or freeing chunks, we
hold the chunks lock across the search and discard calls. We release it
between searches to allow the file system to perform more-or-less
normally. Since the running transaction can commit and disappear while
we're using the transaction pointer, we take a reference to it and
release it after the search. This is safe since it would happen normally
at the end of the transaction commit after any locks are released anyway.
We also take the commit_root_sem to protect against a transaction starting
and committing while we're running.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Tested-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
Btrfs doesn't track superblocks with extent records so there is nothing
persistent on-disk to indicate that those blocks are in use. We track
the superblocks in memory to ensure they don't get used by removing them
from the free space cache when we load a block group from disk. Prior
to 47ab2a6c6a (Btrfs: remove empty block groups automatically), that
was fine since the block group would never be reclaimed so the superblock
was always safe. Once we started removing the empty block groups, we
were protected by the fact that discards weren't being properly issued
for unused space either via FITRIM or -odiscard. The block groups were
still being released, but the blocks remained on disk.
In order to properly discard unused block groups, we need to filter out
the superblocks from the discard range. Superblocks are located at fixed
locations on each device, so it makes sense to filter them out in
btrfs_issue_discard, which is used by both -odiscard and FITRIM.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Tested-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
It's possible, though unexpected, to pass unaligned offsets and lengths
to btrfs_issue_discard. We then shift the offset/length values to sector
units. If an unaligned offset has been passed, it will result in the
entire sector being discarded, possibly losing data. An unaligned
length is safe but we'll end up returning an inaccurate number of
discarded bytes.
This patch aligns the offset to the 512B boundary, adjusts the length,
and warns, since we shouldn't be discarding on an offset that isn't
aligned with our sector size.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Tested-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
Initially this will just be the length argument passed to it,
but the following patches will adjust that to reflect re-alignment
and skipped blocks.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Tested-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
Currently we have two different ways to signal an I/O error on a BIO:
(1) by clearing the BIO_UPTODATE flag
(2) by returning a Linux errno value to the bi_end_io callback
The first one has the drawback of only communicating a single possible
error (-EIO), and the second one has the drawback of not beeing persistent
when bios are queued up, and are not passed along from child to parent
bio in the ever more popular chaining scenario. Having both mechanisms
available has the additional drawback of utterly confusing driver authors
and introducing bugs where various I/O submitters only deal with one of
them, and the others have to add boilerplate code to deal with both kinds
of error returns.
So add a new bi_error field to store an errno value directly in struct
bio and remove the existing mechanisms to clean all this up.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: NeilBrown <neilb@suse.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Omar reported that after commit 4fbcdf6694 ("Btrfs: fix -ENOSPC when
finishing block group creation"), introduced in 4.2-rc1, the following
test was failing due to exhaustion of the system array in the superblock:
#!/bin/bash
truncate -s 100T big.img
mkfs.btrfs big.img
mount -o loop big.img /mnt/loop
num=5
sz=10T
for ((i = 0; i < $num; i++)); do
echo fallocate $i $sz
fallocate -l $sz /mnt/loop/testfile$i
done
btrfs filesystem sync /mnt/loop
for ((i = 0; i < $num; i++)); do
echo rm $i
rm /mnt/loop/testfile$i
btrfs filesystem sync /mnt/loop
done
umount /mnt/loop
This made btrfs_add_system_chunk() fail with -EFBIG due to excessive
allocation of system block groups. This happened because the test creates
a large number of data block groups per transaction and when committing
the transaction we start the writeout of the block group caches for all
the new new (dirty) block groups, which results in pre-allocating space
for each block group's free space cache using the same transaction handle.
That in turn often leads to creation of more block groups, and all get
attached to the new_bgs list of the same transaction handle to the point
of getting a list with over 1500 elements, and creation of new block groups
leads to the need of reserving space in the chunk block reserve and often
creating a new system block group too.
So that made us quickly exhaust the chunk block reserve/system space info,
because as of the commit mentioned before, we do reserve space for each
new block group in the chunk block reserve, unlike before where we would
not and would at most allocate one new system block group and therefore
would only ensure that there was enough space in the system space info to
allocate 1 new block group even if we ended up allocating thousands of
new block groups using the same transaction handle. That worked most of
the time because the computed required space at check_system_chunk() is
very pessimistic (assumes a chunk tree height of BTRFS_MAX_LEVEL/8 and
that all nodes/leafs in a path will be COWed and split) and since the
updates to the chunk tree all happen at btrfs_create_pending_block_groups
it is unlikely that a path needs to be COWed more than once (unless
writepages() for the btree inode is called by mm in between) and that
compensated for the need of creating any new nodes/leads in the chunk
tree.
So fix this by ensuring we don't accumulate a too large list of new block
groups in a transaction's handles new_bgs list, inserting/updating the
chunk tree for all accumulated new block groups and releasing the unused
space from the chunk block reserve whenever the list becomes sufficiently
large. This is a generic solution even though the problem currently can
only happen when starting the writeout of the free space caches for all
dirty block groups (btrfs_start_dirty_block_groups()).
Reported-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Tested-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
sorry I indented to use btrfs_err() and I have no idea
how btrfs_error() got there.
infact I was thinking about these kind of oversights
since these two func are too closely named.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
Liu Bo <bo.li.liu@oracle.com> reported a lockdep warning of
delayed_iput_sem in xfstests generic/241:
[ 2061.345955] =============================================
[ 2061.346027] [ INFO: possible recursive locking detected ]
[ 2061.346027] 4.1.0+ #268 Tainted: G W
[ 2061.346027] ---------------------------------------------
[ 2061.346027] btrfs-cleaner/3045 is trying to acquire lock:
[ 2061.346027] (&fs_info->delayed_iput_sem){++++..}, at:
[<ffffffff814063ab>] btrfs_run_delayed_iputs+0x6b/0x100
[ 2061.346027] but task is already holding lock:
[ 2061.346027] (&fs_info->delayed_iput_sem){++++..}, at: [<ffffffff814063ab>] btrfs_run_delayed_iputs+0x6b/0x100
[ 2061.346027] other info that might help us debug this:
[ 2061.346027] Possible unsafe locking scenario:
[ 2061.346027] CPU0
[ 2061.346027] ----
[ 2061.346027] lock(&fs_info->delayed_iput_sem);
[ 2061.346027] lock(&fs_info->delayed_iput_sem);
[ 2061.346027]
*** DEADLOCK ***
It is rarely happened, about 1/400 in my test env.
The reason is recursion of btrfs_run_delayed_iputs():
cleaner_kthread
-> btrfs_run_delayed_iputs() *1
-> get delayed_iput_sem lock *2
-> iput()
-> ...
-> btrfs_commit_transaction()
-> btrfs_run_delayed_iputs() *1
-> get delayed_iput_sem lock (dead lock) *2
*1: recursion of btrfs_run_delayed_iputs()
*2: warning of lockdep about delayed_iput_sem
When fs is in high stress, new iputs may added into fs_info->delayed_iputs
list when btrfs_run_delayed_iputs() is running, which cause
second btrfs_run_delayed_iputs() run into down_read(&fs_info->delayed_iput_sem)
again, and cause above lockdep warning.
Actually, it will not cause real problem because both locks are read lock,
but to avoid lockdep warning, we can do a fix.
Fix:
Don't do btrfs_run_delayed_iputs() in btrfs_commit_transaction() for
cleaner_kthread thread to break above recursion path.
cleaner_kthread is calling btrfs_run_delayed_iputs() explicitly in code,
and don't need to call btrfs_run_delayed_iputs() again in
btrfs_commit_transaction(), it also give us a bonus to avoid stack overflow.
Test:
No above lockdep warning after patch in 1200 generic/241 tests.
Reported-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Chris Mason <clm@fb.com>
Pull btrfs fixes from Chris Mason:
"These are all from Filipe, and cover a few problems we've had reported
on the list recently (along with ones he found on his own)"
* 'for-linus-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
Btrfs: fix file corruption after cloning inline extents
Btrfs: fix order by which delayed references are run
Btrfs: fix list transaction->pending_ordered corruption
Btrfs: fix memory leak in the extent_same ioctl
Btrfs: fix shrinking truncate when the no_holes feature is enabled
Using the clone ioctl (or extent_same ioctl, which calls the same extent
cloning function as well) we end up allowing copy an inline extent from
the source file into a non-zero offset of the destination file. This is
something not expected and that the btrfs code is not prepared to deal
with - all inline extents must be at a file offset equals to 0.
For example, the following excerpt of a test case for fstests triggers
a crash/BUG_ON() on a write operation after an inline extent is cloned
into a non-zero offset:
_scratch_mkfs >>$seqres.full 2>&1
_scratch_mount
# Create our test files. File foo has the same 2K of data at offset 4K
# as file bar has at its offset 0.
$XFS_IO_PROG -f -s -c "pwrite -S 0xaa 0 4K" \
-c "pwrite -S 0xbb 4k 2K" \
-c "pwrite -S 0xcc 8K 4K" \
$SCRATCH_MNT/foo | _filter_xfs_io
# File bar consists of a single inline extent (2K size).
$XFS_IO_PROG -f -s -c "pwrite -S 0xbb 0 2K" \
$SCRATCH_MNT/bar | _filter_xfs_io
# Now call the clone ioctl to clone the extent of file bar into file
# foo at its offset 4K. This made file foo have an inline extent at
# offset 4K, something which the btrfs code can not deal with in future
# IO operations because all inline extents are supposed to start at an
# offset of 0, resulting in all sorts of chaos.
# So here we validate that clone ioctl returns an EOPNOTSUPP, which is
# what it returns for other cases dealing with inlined extents.
$CLONER_PROG -s 0 -d $((4 * 1024)) -l $((2 * 1024)) \
$SCRATCH_MNT/bar $SCRATCH_MNT/foo
# Because of the inline extent at offset 4K, the following write made
# the kernel crash with a BUG_ON().
$XFS_IO_PROG -c "pwrite -S 0xdd 6K 2K" $SCRATCH_MNT/foo | _filter_xfs_io
status=0
exit
The stack trace of the BUG_ON() triggered by the last write is:
[152154.035903] ------------[ cut here ]------------
[152154.036424] kernel BUG at mm/page-writeback.c:2286!
[152154.036424] invalid opcode: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC
[152154.036424] Modules linked in: btrfs dm_flakey dm_mod crc32c_generic xor raid6_pq nfsd auth_rpcgss oid_registry nfs_acl nfs lockd grace fscache sunrpc loop fuse parport_pc acpi_cpu$
[152154.036424] CPU: 2 PID: 17873 Comm: xfs_io Tainted: G W 4.1.0-rc6-btrfs-next-11+ #2
[152154.036424] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.8.1-0-g4adadbd-20150316_085822-nilsson.home.kraxel.org 04/01/2014
[152154.036424] task: ffff880429f70990 ti: ffff880429efc000 task.ti: ffff880429efc000
[152154.036424] RIP: 0010:[<ffffffff8111a9d5>] [<ffffffff8111a9d5>] clear_page_dirty_for_io+0x1e/0x90
[152154.036424] RSP: 0018:ffff880429effc68 EFLAGS: 00010246
[152154.036424] RAX: 0200000000000806 RBX: ffffea0006a6d8f0 RCX: 0000000000000001
[152154.036424] RDX: 0000000000000000 RSI: ffffffff81155d1b RDI: ffffea0006a6d8f0
[152154.036424] RBP: ffff880429effc78 R08: ffff8801ce389fe0 R09: 0000000000000001
[152154.036424] R10: 0000000000002000 R11: ffffffffffffffff R12: ffff8800200dce68
[152154.036424] R13: 0000000000000000 R14: ffff8800200dcc88 R15: ffff8803d5736d80
[152154.036424] FS: 00007fbf119f6700(0000) GS:ffff88043d280000(0000) knlGS:0000000000000000
[152154.036424] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[152154.036424] CR2: 0000000001bdc000 CR3: 00000003aa555000 CR4: 00000000000006e0
[152154.036424] Stack:
[152154.036424] ffff8803d5736d80 0000000000000001 ffff880429effcd8 ffffffffa04e97c1
[152154.036424] ffff880429effd68 ffff880429effd60 0000000000000001 ffff8800200dc9c8
[152154.036424] 0000000000000001 ffff8800200dcc88 0000000000000000 0000000000001000
[152154.036424] Call Trace:
[152154.036424] [<ffffffffa04e97c1>] lock_and_cleanup_extent_if_need+0x147/0x18d [btrfs]
[152154.036424] [<ffffffffa04ea82c>] __btrfs_buffered_write+0x245/0x4c8 [btrfs]
[152154.036424] [<ffffffffa04ed14b>] ? btrfs_file_write_iter+0x150/0x3e0 [btrfs]
[152154.036424] [<ffffffffa04ed15a>] ? btrfs_file_write_iter+0x15f/0x3e0 [btrfs]
[152154.036424] [<ffffffffa04ed2c7>] btrfs_file_write_iter+0x2cc/0x3e0 [btrfs]
[152154.036424] [<ffffffff81165a4a>] __vfs_write+0x7c/0xa5
[152154.036424] [<ffffffff81165f89>] vfs_write+0xa0/0xe4
[152154.036424] [<ffffffff81166855>] SyS_pwrite64+0x64/0x82
[152154.036424] [<ffffffff81465197>] system_call_fastpath+0x12/0x6f
[152154.036424] Code: 48 89 c7 e8 0f ff ff ff 5b 41 5c 5d c3 0f 1f 44 00 00 55 48 89 e5 41 54 53 48 89 fb e8 ae ef 00 00 49 89 c4 48 8b 03 a8 01 75 02 <0f> 0b 4d 85 e4 74 59 49 8b 3c 2$
[152154.036424] RIP [<ffffffff8111a9d5>] clear_page_dirty_for_io+0x1e/0x90
[152154.036424] RSP <ffff880429effc68>
[152154.242621] ---[ end trace e3d3376b23a57041 ]---
Fix this by returning the error EOPNOTSUPP if an attempt to copy an
inline extent into a non-zero offset happens, just like what is done for
other scenarios that would require copying/splitting inline extents,
which were introduced by the following commits:
00fdf13a2e ("Btrfs: fix a crash of clone with inline extents's split")
3f9e3df8da ("btrfs: replace error code from btrfs_drop_extents")
Cc: stable@vger.kernel.org
Signed-off-by: Filipe Manana <fdmanana@suse.com>
When we have an extent that got N references removed and N new references
added in the same transaction, we must run the insertion of the references
first because otherwise the last removed reference will remove the extent
item from the extent tree, resulting in a failure for the insertions.
This is a regression introduced in the 4.2-rc1 release and this fix just
brings back the behaviour of selecting reference additions before any
reference removals.
The following test case for fstests reproduces the issue:
seq=`basename $0`
seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
tmp=/tmp/$$
status=1 # failure is the default!
trap "_cleanup; exit \$status" 0 1 2 3 15
_cleanup()
{
_cleanup_flakey
rm -f $tmp.*
}
# get standard environment, filters and checks
. ./common/rc
. ./common/filter
. ./common/dmflakey
# real QA test starts here
_need_to_be_root
_supported_fs btrfs
_supported_os Linux
_require_scratch
_require_dm_flakey
_require_cloner
_require_metadata_journaling $SCRATCH_DEV
rm -f $seqres.full
_scratch_mkfs >>$seqres.full 2>&1
_init_flakey
_mount_flakey
# Create prealloc extent covering range [160K, 620K[
$XFS_IO_PROG -f -c "falloc 160K 460K" $SCRATCH_MNT/foo
# Now write to the last 80K of the prealloc extent plus 40K to the unallocated
# space that immediately follows it. This creates a new extent of 40K that spans
# the range [620K, 660K[.
$XFS_IO_PROG -c "pwrite -S 0xaa 540K 120K" $SCRATCH_MNT/foo | _filter_xfs_io
# At this point, there are now 2 back references to the prealloc extent in our
# extent tree. Both are for our file offset 160K and one relates to a file
# extent item with a data offset of 0 and a length of 380K, while the other
# relates to a file extent item with a data offset of 380K and a length of 80K.
# Make sure everything done so far is durably persisted (all back references are
# in the extent tree, etc).
sync
# Now clone all extents of our file that cover the offset 160K up to its eof
# (660K at this point) into itself at offset 2M. This leaves a hole in the file
# covering the range [660K, 2M[. The prealloc extent will now be referenced by
# the file twice, once for offset 160K and once for offset 2M. The 40K extent
# that follows the prealloc extent will also be referenced twice by our file,
# once for offset 620K and once for offset 2M + 460K.
$CLONER_PROG -s $((160 * 1024)) -d $((2 * 1024 * 1024)) -l 0 $SCRATCH_MNT/foo \
$SCRATCH_MNT/foo
# Now create one new extent in our file with a size of 100Kb. It will span the
# range [3M, 3M + 100K[. It also will cause creation of a hole spanning the
# range [2M + 460K, 3M[. Our new file size is 3M + 100K.
$XFS_IO_PROG -c "pwrite -S 0xbb 3M 100K" $SCRATCH_MNT/foo | _filter_xfs_io
# At this point, there are now (in memory) 4 back references to the prealloc
# extent.
#
# Two of them are for file offset 160K, related to file extent items
# matching the file offsets 160K and 540K respectively, with data offsets of
# 0 and 380K respectively, and with lengths of 380K and 80K respectively.
#
# The other two references are for file offset 2M, related to file extent items
# matching the file offsets 2M and 2M + 380K respectively, with data offsets of
# 0 and 380K respectively, and with lengths of 389K and 80K respectively.
#
# The 40K extent has 2 back references, one for file offset 620K and the other
# for file offset 2M + 460K.
#
# The 100K extent has a single back reference and it relates to file offset 3M.
# Now clone our 100K extent into offset 600K. That offset covers the last 20K
# of the prealloc extent, the whole 40K extent and 40K of the hole starting at
# offset 660K.
$CLONER_PROG -s $((3 * 1024 * 1024)) -d $((600 * 1024)) -l $((100 * 1024)) \
$SCRATCH_MNT/foo $SCRATCH_MNT/foo
# At this point there's only one reference to the 40K extent, at file offset
# 2M + 460K, we have 4 references for the prealloc extent (2 for file offset
# 160K and 2 for file offset 2M) and 2 references for the 100K extent (1 for
# file offset 3M and a new one for file offset 600K).
# Now fsync our file to make all its new data and metadata updates are durably
# persisted and present if a power failure/crash happens after a successful
# fsync and before the next transaction commit.
$XFS_IO_PROG -c "fsync" $SCRATCH_MNT/foo
echo "File digest before power failure:"
md5sum $SCRATCH_MNT/foo | _filter_scratch
# Silently drop all writes and ummount to simulate a crash/power failure.
_load_flakey_table $FLAKEY_DROP_WRITES
_unmount_flakey
# Allow writes again, mount to trigger log replay and validate file contents.
# During log replay, the btrfs delayed references implementation used to run the
# deletion of back references before the addition of new back references, which
# made the addition fail as it didn't find the key in the extent tree that it
# was looking for. The failure triggered by this test was related to the 40K
# extent, which got 1 reference dropped and 1 reference added during the fsync
# log replay - when running the delayed references at transaction commit time,
# btrfs was applying the deletion before the insertion, resulting in a failure
# of the insertion that ended up turning the fs into read-only mode.
_load_flakey_table $FLAKEY_ALLOW_WRITES
_mount_flakey
echo "File digest after log replay:"
md5sum $SCRATCH_MNT/foo | _filter_scratch
_unmount_flakey
status=0
exit
This issue turned the filesystem into read-only mode (current transaction
aborted) and produced the following traces:
[ 8247.578385] ------------[ cut here ]------------
[ 8247.579947] WARNING: CPU: 0 PID: 11341 at fs/btrfs/extent-tree.c:1547 lookup_inline_extent_backref+0x17d/0x45d [btrfs]()
(...)
[ 8247.601697] Call Trace:
[ 8247.602222] [<ffffffff8145f077>] dump_stack+0x4f/0x7b
[ 8247.604320] [<ffffffff8104b3b0>] warn_slowpath_common+0xa1/0xbb
[ 8247.605488] [<ffffffffa0506c8d>] ? lookup_inline_extent_backref+0x17d/0x45d [btrfs]
[ 8247.608226] [<ffffffffa0506c8d>] lookup_inline_extent_backref+0x17d/0x45d [btrfs]
[ 8247.617061] [<ffffffffa0507957>] insert_inline_extent_backref+0x41/0xb2 [btrfs]
[ 8247.621856] [<ffffffffa0507c4f>] __btrfs_inc_extent_ref+0x8c/0x20a [btrfs]
[ 8247.624366] [<ffffffffa050ee60>] __btrfs_run_delayed_refs+0xb0c/0xd49 [btrfs]
[ 8247.626176] [<ffffffffa0510dcd>] btrfs_run_delayed_refs+0x6d/0x1d4 [btrfs]
[ 8247.627435] [<ffffffff81155c9b>] ? __cache_free+0x4a7/0x4b6
[ 8247.628531] [<ffffffffa0520482>] btrfs_commit_transaction+0x4c/0xa20 [btrfs]
(...)
[ 8247.648430] ---[ end trace 2461e55f92c2ac2d ]---
[ 8247.727263] WARNING: CPU: 3 PID: 11341 at fs/btrfs/extent-tree.c:2771 btrfs_run_delayed_refs+0xa4/0x1d4 [btrfs]()
[ 8247.728954] BTRFS: Transaction aborted (error -5)
(...)
[ 8247.760866] Call Trace:
[ 8247.761534] [<ffffffff8145f077>] dump_stack+0x4f/0x7b
[ 8247.764271] [<ffffffff8104b3b0>] warn_slowpath_common+0xa1/0xbb
[ 8247.767582] [<ffffffffa0510e04>] ? btrfs_run_delayed_refs+0xa4/0x1d4 [btrfs]
[ 8247.769373] [<ffffffff8104b410>] warn_slowpath_fmt+0x46/0x48
[ 8247.770836] [<ffffffffa0510e04>] btrfs_run_delayed_refs+0xa4/0x1d4 [btrfs]
[ 8247.772532] [<ffffffff81155c9b>] ? __cache_free+0x4a7/0x4b6
[ 8247.773664] [<ffffffffa0520482>] btrfs_commit_transaction+0x4c/0xa20 [btrfs]
[ 8247.775047] [<ffffffff81087310>] ? trace_hardirqs_on+0xd/0xf
[ 8247.776176] [<ffffffff81155dd5>] ? kmem_cache_free+0x12b/0x189
[ 8247.777427] [<ffffffffa055a920>] btrfs_recover_log_trees+0x2da/0x33d [btrfs]
[ 8247.778575] [<ffffffffa055898e>] ? replay_one_extent+0x4fc/0x4fc [btrfs]
[ 8247.779838] [<ffffffffa051e265>] open_ctree+0x1cc0/0x201a [btrfs]
[ 8247.781020] [<ffffffff81120f48>] ? register_shrinker+0x56/0x81
[ 8247.782285] [<ffffffffa04fb12c>] btrfs_mount+0x5f0/0x734 [btrfs]
(...)
[ 8247.793394] ---[ end trace 2461e55f92c2ac2e ]---
[ 8247.794276] BTRFS: error (device dm-0) in btrfs_run_delayed_refs:2771: errno=-5 IO failure
[ 8247.797335] BTRFS: error (device dm-0) in btrfs_replay_log:2375: errno=-5 IO failure (Failed to recover log tree)
Fixes: c6fc245499 ("btrfs: delayed-ref: Use list to replace the ref_root in ref_head.")
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Acked-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
When we call btrfs_commit_transaction(), we splice the list "ordered"
of our transaction handle into the transaction's "pending_ordered"
list, but we don't re-initialize the "ordered" list of our transaction
handle, this means it still points to the same elements it used to
before the splice. Then we check if the current transaction's state is
>= TRANS_STATE_COMMIT_START and if it is we end up calling
btrfs_end_transaction() which simply splices again the "ordered" list
of our handle into the transaction's "pending_ordered" list, leaving
multiple pointers to the same ordered extents which results in list
corruption when we are iterating, removing and freeing ordered extents
at btrfs_wait_pending_ordered(), resulting in access to dangling
pointers / use-after-free issues.
Similarly, btrfs_end_transaction() can end up in some cases calling
btrfs_commit_transaction(), and both did a list splice of the transaction
handle's "ordered" list into the transaction's "pending_ordered" without
re-initializing the handle's "ordered" list, resulting in exactly the
same problem.
This produces the following warning on a kernel with linked list
debugging enabled:
[109749.265416] ------------[ cut here ]------------
[109749.266410] WARNING: CPU: 7 PID: 324 at lib/list_debug.c:59 __list_del_entry+0x5a/0x98()
[109749.267969] list_del corruption. prev->next should be ffff8800ba087e20, but was fffffff8c1f7c35d
(...)
[109749.287505] Call Trace:
[109749.288135] [<ffffffff8145f077>] dump_stack+0x4f/0x7b
[109749.298080] [<ffffffff81095de5>] ? console_unlock+0x356/0x3a2
[109749.331605] [<ffffffff8104b3b0>] warn_slowpath_common+0xa1/0xbb
[109749.334849] [<ffffffff81260642>] ? __list_del_entry+0x5a/0x98
[109749.337093] [<ffffffff8104b410>] warn_slowpath_fmt+0x46/0x48
[109749.337847] [<ffffffff81260642>] __list_del_entry+0x5a/0x98
[109749.338678] [<ffffffffa053e8bf>] btrfs_wait_pending_ordered+0x46/0xdb [btrfs]
[109749.340145] [<ffffffffa058a65f>] ? __btrfs_run_delayed_items+0x149/0x163 [btrfs]
[109749.348313] [<ffffffffa054077d>] btrfs_commit_transaction+0x36b/0xa10 [btrfs]
[109749.349745] [<ffffffff81087310>] ? trace_hardirqs_on+0xd/0xf
[109749.350819] [<ffffffffa055370d>] btrfs_sync_file+0x36f/0x3fc [btrfs]
[109749.351976] [<ffffffff8118ec98>] vfs_fsync_range+0x8f/0x9e
[109749.360341] [<ffffffff8118ecc3>] vfs_fsync+0x1c/0x1e
[109749.368828] [<ffffffff8118ee1d>] do_fsync+0x34/0x4e
[109749.369790] [<ffffffff8118f045>] SyS_fsync+0x10/0x14
[109749.370925] [<ffffffff81465197>] system_call_fastpath+0x12/0x6f
[109749.382274] ---[ end trace 48e0d07f7c03d95a ]---
On a non-debug kernel this leads to invalid memory accesses, causing a
crash. Fix this by using list_splice_init() instead of list_splice() in
btrfs_commit_transaction() and btrfs_end_transaction().
Cc: stable@vger.kernel.org
Fixes: 50d9aa99bd ("Btrfs: make sure logged extents complete in the current transaction V3"
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
We were allocating memory with memdup_user() but we were never releasing
that memory. This affected pretty much every call to the ioctl, whether
it deduplicated extents or not.
This issue was reported on IRC by Julian Taylor and on the mailing list
by Marcel Ritter, credit goes to them for finding the issue.
Reported-by: Julian Taylor <jtaylor.debian@googlemail.com>
Reported-by: Marcel Ritter <ritter.marcel@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Mark Fasheh <mfasheh@suse.de>
If the no_holes feature is enabled, we attempt to shrink a file to a size
that ends up in the middle of a hole and we don't have any file extent
items in the fs/subvol tree that go beyond the new file size (or any
ordered extents that will insert such file extent items), we end up not
updating the inode's disk_i_size, we only update the inode's i_size.
This means that after unmounting and mounting the filesystem, or after
the inode is evicted and reloaded, its i_size ends up being incorrect
(an inode's i_size is set to the disk_i_size field when an inode is
loaded). This happens when btrfs_truncate_inode_items() doesn't find
any file extent items to drop - in this case it never makes a call to
btrfs_ordered_update_i_size() in order to update the inode's disk_i_size.
Example reproducer:
$ mkfs.btrfs -O no-holes -f /dev/sdd
$ mount /dev/sdd /mnt
# Create our test file with some data and durably persist it.
$ xfs_io -f -c "pwrite -S 0xaa 0 128K" /mnt/foo
$ sync
# Append some data to the file, increasing its size, and leave a hole
# between the old size and the start offset if the following write. So
# our file gets a hole in the range [128Kb, 256Kb[.
$ xfs_io -c "truncate 160K" /mnt/foo
# We expect to see our file with a size of 160Kb, with the first 128Kb
# of data all having the value 0xaa and the remaining 32Kb of data all
# having the value 0x00.
$ od -t x1 /mnt/foo
0000000 aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa
*
0400000 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
*
0500000
# Now cleanly unmount and mount again the filesystem.
$ umount /mnt
$ mount /dev/sdd /mnt
# We expect to get the same result as before, a file with a size of
# 160Kb, with the first 128Kb of data all having the value 0xaa and the
# remaining 32Kb of data all having the value 0x00.
$ od -t x1 /mnt/foo
0000000 aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa
*
0400000
In the example above the file size/data do not match what they were before
the remount.
Fix this by always calling btrfs_ordered_update_i_size() with a size
matching the size the file was truncated to if btrfs_truncate_inode_items()
is not called for a log tree and no file extent items were dropped. This
ensures the same behaviour as when the no_holes feature is not enabled.
A test case for fstests follows soon.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Pull btrfs fixes from Chris Mason:
"This is an assortment of fixes. Most of the commits are from Filipe
(fsync, the inode allocation cache and a few others). Mark kicked in
a series fixing corners in the extent sharing ioctls, and everyone
else fixed up on assorted other problems"
* 'for-linus-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
Btrfs: fix wrong check for btrfs_force_chunk_alloc()
Btrfs: fix warning of bytes_may_use
Btrfs: fix hang when failing to submit bio of directIO
Btrfs: fix a comment in inode.c:evict_inode_truncate_pages()
Btrfs: fix memory corruption on failure to submit bio for direct IO
btrfs: don't update mtime/ctime on deduped inodes
btrfs: allow dedupe of same inode
btrfs: fix deadlock with extent-same and readpage
btrfs: pass unaligned length to btrfs_cmp_data()
Btrfs: fix fsync after truncate when no_holes feature is enabled
Btrfs: fix fsync xattr loss in the fast fsync path
Btrfs: fix fsync data loss after append write
Btrfs: fix crash on close_ctree() if cleaner starts new transaction
Btrfs: fix race between caching kthread and returning inode to inode cache
Btrfs: use kmem_cache_free when freeing entry in inode cache
Btrfs: fix race between balance and unused block group deletion
btrfs: add error handling for scrub_workers_get()
btrfs: cleanup noused initialization of dev in btrfs_end_bio()
btrfs: qgroup: allow user to clear the limitation on qgroup
Pull more vfs updates from Al Viro:
"Assorted VFS fixes and related cleanups (IMO the most interesting in
that part are f_path-related things and Eric's descriptor-related
stuff). UFS regression fixes (it got broken last cycle). 9P fixes.
fs-cache series, DAX patches, Jan's file_remove_suid() work"
[ I'd say this is much more than "fixes and related cleanups". The
file_table locking rule change by Eric Dumazet is a rather big and
fundamental update even if the patch isn't huge. - Linus ]
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (49 commits)
9p: cope with bogus responses from server in p9_client_{read,write}
p9_client_write(): avoid double p9_free_req()
9p: forgetting to cancel request on interrupted zero-copy RPC
dax: bdev_direct_access() may sleep
block: Add support for DAX reads/writes to block devices
dax: Use copy_from_iter_nocache
dax: Add block size note to documentation
fs/file.c: __fget() and dup2() atomicity rules
fs/file.c: don't acquire files->file_lock in fd_install()
fs:super:get_anon_bdev: fix race condition could cause dev exceed its upper limitation
vfs: avoid creation of inode number 0 in get_next_ino
namei: make set_root_rcu() return void
make simple_positive() public
ufs: use dir_pages instead of ufs_dir_pages()
pagemap.h: move dir_pages() over there
remove the pointless include of lglock.h
fs: cleanup slight list_entry abuse
xfs: Correctly lock inode when removing suid and file capabilities
fs: Call security_ops->inode_killpriv on truncate
fs: Provide function telling whether file_remove_privs() will do anything
...
btrfs_force_chunk_alloc() return 1 for allocation chunk successfully.
This problem exists since commit c87f08ca4.
With this patch, we might fix some enospc problems for balances.
Signed-off-by: Wang Shilong <wangshilong1991@gmail.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Tested-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
While running generic/019, dmesg got several warnings from
btrfs_free_reserved_data_space().
Test generic/019 produces some disk failures so sumbit dio will get errors,
in which case, btrfs_direct_IO() goes to the error handling and free
bytes_may_use, but the problem is that bytes_may_use has been free'd
during get_block().
This adds a runtime flag to show if we've gone through get_block(), if so,
don't do the cleanup work.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Tested-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
The hang is uncoverd by generic/019.
btrfs_endio_direct_write() skips the "finish_ordered_fn" part when it hits
an error, thus those added ordered extents will never get processed, which
block processes that waiting for them via btrfs_start_ordered_extent().
This fixes the above, and meanwhile finish_ordered_fn will do the space
accounting work.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Tested-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
The comment was not correct about the part where it says the endio
callback of the bio might have not yet been called - update it
to mention that by that time the endio callback execution might
still be in progress only.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Chris Mason <clm@fb.com>
If we fail to submit a bio for a direct IO request, we were grabbing the
corresponding ordered extent and decrementing its reference count twice,
once for our lookup reference and once for the ordered tree reference.
This was a problem because it caused the ordered extent to be freed
without removing it from the ordered tree and any lists it might be
attached to, leaving dangling pointers to the ordered extent around.
Example trace with CONFIG_DEBUG_PAGEALLOC=y:
[161779.858707] BUG: unable to handle kernel paging request at 0000000087654330
[161779.859983] IP: [<ffffffff8124ca68>] rb_prev+0x22/0x3b
[161779.860636] PGD 34d818067 PUD 0
[161779.860636] Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC
(...)
[161779.860636] Call Trace:
[161779.860636] [<ffffffffa06b36a6>] __tree_search+0xd9/0xf9 [btrfs]
[161779.860636] [<ffffffffa06b3708>] tree_search+0x42/0x63 [btrfs]
[161779.860636] [<ffffffffa06b4868>] ? btrfs_lookup_ordered_range+0x2d/0xa5 [btrfs]
[161779.860636] [<ffffffffa06b4873>] btrfs_lookup_ordered_range+0x38/0xa5 [btrfs]
[161779.860636] [<ffffffffa06aab8e>] btrfs_get_blocks_direct+0x11b/0x615 [btrfs]
[161779.860636] [<ffffffff8119727f>] do_blockdev_direct_IO+0x5ff/0xb43
[161779.860636] [<ffffffffa06aaa73>] ? btrfs_page_exists_in_range+0x1ad/0x1ad [btrfs]
[161779.860636] [<ffffffffa06a2c9a>] ? btrfs_get_extent_fiemap+0x1bc/0x1bc [btrfs]
[161779.860636] [<ffffffff811977f5>] __blockdev_direct_IO+0x32/0x34
[161779.860636] [<ffffffffa06a2c9a>] ? btrfs_get_extent_fiemap+0x1bc/0x1bc [btrfs]
[161779.860636] [<ffffffffa06a10ae>] btrfs_direct_IO+0x198/0x21f [btrfs]
[161779.860636] [<ffffffffa06a2c9a>] ? btrfs_get_extent_fiemap+0x1bc/0x1bc [btrfs]
[161779.860636] [<ffffffff81112ca1>] generic_file_direct_write+0xb3/0x128
[161779.860636] [<ffffffffa06affaa>] ? btrfs_file_write_iter+0x15f/0x3e0 [btrfs]
[161779.860636] [<ffffffffa06b004c>] btrfs_file_write_iter+0x201/0x3e0 [btrfs]
(...)
We were also not freeing the btrfs_dio_private we allocated previously,
which kmemleak reported with the following trace in its sysfs file:
unreferenced object 0xffff8803f553bf80 (size 96):
comm "xfs_io", pid 4501, jiffies 4295039588 (age 173.936s)
hex dump (first 32 bytes):
88 6c 9b f5 02 88 ff ff 00 00 00 00 00 00 00 00 .l..............
00 00 00 00 00 00 00 00 00 00 c4 00 00 00 00 00 ................
backtrace:
[<ffffffff81161ffe>] create_object+0x172/0x29a
[<ffffffff8145870f>] kmemleak_alloc+0x25/0x41
[<ffffffff81154e64>] kmemleak_alloc_recursive.constprop.40+0x16/0x18
[<ffffffff811579ed>] kmem_cache_alloc_trace+0xfb/0x148
[<ffffffffa03d8cff>] btrfs_submit_direct+0x65/0x16a [btrfs]
[<ffffffff811968dc>] dio_bio_submit+0x62/0x8f
[<ffffffff811975fe>] do_blockdev_direct_IO+0x97e/0xb43
[<ffffffff811977f5>] __blockdev_direct_IO+0x32/0x34
[<ffffffffa03d70ae>] btrfs_direct_IO+0x198/0x21f [btrfs]
[<ffffffff81112ca1>] generic_file_direct_write+0xb3/0x128
[<ffffffffa03e604d>] btrfs_file_write_iter+0x201/0x3e0 [btrfs]
[<ffffffff8116586a>] __vfs_write+0x7c/0xa5
[<ffffffff81165da9>] vfs_write+0xa0/0xe4
[<ffffffff81166675>] SyS_pwrite64+0x64/0x82
[<ffffffff81464fd7>] system_call_fastpath+0x12/0x6f
[<ffffffffffffffff>] 0xffffffffffffffff
For read requests we weren't doing any cleanup either (none of the work
done by btrfs_endio_direct_read()), so a failure submitting a bio for a
read request would leave a range in the inode's io_tree locked forever,
blocking any future operations (both reads and writes) against that range.
So fix this by making sure we do the same cleanup that we do for the case
where the bio submission succeeds.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
One issue users have reported is that dedupe changes mtime on files,
resulting in tools like rsync thinking that their contents have changed when
in fact the data is exactly the same. We also skip the ctime update as no
user-visible metadata changes here and we want dedupe to be transparent to
the user.
Clone still wants time changes, so we special case this in the code.
This was tested with the btrfs-extent-same tool.
Signed-off-by: Mark Fasheh <mfasheh@suse.de>
Signed-off-by: Chris Mason <clm@fb.com>
clone() supports cloning within an inode so extent-same can do
the same now. This patch fixes up the locking in extent-same to
know about the single-inode case. In addition to that, we add a
check for overlapping ranges, which clone does not allow.
Signed-off-by: Mark Fasheh <mfasheh@suse.de>
Reviewed-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
->readpage() does page_lock() before extent_lock(), we do the opposite in
extent-same. We want to reverse the order in btrfs_extent_same() but it's
not quite straightforward since the page locks are taken inside btrfs_cmp_data().
So I split btrfs_cmp_data() into 3 parts with a small context structure that
is passed between them. The first, btrfs_cmp_data_prepare() gathers up the
pages needed (taking page lock as required) and puts them on our context
structure. At this point, we are safe to lock the extent range. Afterwards,
we use btrfs_cmp_data() to do the data compare as usual and btrfs_cmp_data_free()
to clean up our context.
Signed-off-by: Mark Fasheh <mfasheh@suse.de>
Reviewed-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
In the case that we dedupe the tail of a file, we might expand the dedupe
len out to the end of our last block. We don't want to compare data past
i_size however, so pass the original length to btrfs_cmp_data().
Signed-off-by: Mark Fasheh <mfasheh@suse.de>
Reviewed-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
When we have the no_holes feature enabled, if a we truncate a file to a
smaller size, truncate it again but to a size greater than or equals to
its original size and fsync it, the log tree will not have any information
about the hole covering the range [truncate_1_offset, new_file_size[.
Which means if the fsync log is replayed, the file will remain with the
state it had before both truncate operations.
Without the no_holes feature this does not happen, since when the inode
is logged (full sync flag is set) it will find in the fs/subvol tree a
leaf with a generation matching the current transaction id that has an
explicit extent item representing the hole.
Fix this by adding an explicit extent item representing a hole between
the last extent and the inode's i_size if we are doing a full sync.
The issue is easy to reproduce with the following test case for fstests:
. ./common/rc
. ./common/filter
. ./common/dmflakey
_need_to_be_root
_supported_fs generic
_supported_os Linux
_require_scratch
_require_dm_flakey
# This test was motivated by an issue found in btrfs when the btrfs
# no-holes feature is enabled (introduced in kernel 3.14). So enable
# the feature if the fs being tested is btrfs.
if [ $FSTYP == "btrfs" ]; then
_require_btrfs_fs_feature "no_holes"
_require_btrfs_mkfs_feature "no-holes"
MKFS_OPTIONS="$MKFS_OPTIONS -O no-holes"
fi
rm -f $seqres.full
_scratch_mkfs >>$seqres.full 2>&1
_init_flakey
_mount_flakey
# Create our test files and make sure everything is durably persisted.
$XFS_IO_PROG -f -c "pwrite -S 0xaa 0 64K" \
-c "pwrite -S 0xbb 64K 61K" \
$SCRATCH_MNT/foo | _filter_xfs_io
$XFS_IO_PROG -f -c "pwrite -S 0xee 0 64K" \
-c "pwrite -S 0xff 64K 61K" \
$SCRATCH_MNT/bar | _filter_xfs_io
sync
# Now truncate our file foo to a smaller size (64Kb) and then truncate
# it to the size it had before the shrinking truncate (125Kb). Then
# fsync our file. If a power failure happens after the fsync, we expect
# our file to have a size of 125Kb, with the first 64Kb of data having
# the value 0xaa and the second 61Kb of data having the value 0x00.
$XFS_IO_PROG -c "truncate 64K" \
-c "truncate 125K" \
-c "fsync" \
$SCRATCH_MNT/foo
# Do something similar to our file bar, but the first truncation sets
# the file size to 0 and the second truncation expands the size to the
# double of what it was initially.
$XFS_IO_PROG -c "truncate 0" \
-c "truncate 253K" \
-c "fsync" \
$SCRATCH_MNT/bar
_load_flakey_table $FLAKEY_DROP_WRITES
_unmount_flakey
# Allow writes again, mount to trigger log replay and validate file
# contents.
_load_flakey_table $FLAKEY_ALLOW_WRITES
_mount_flakey
# We expect foo to have a size of 125Kb, the first 64Kb of data all
# having the value 0xaa and the remaining 61Kb to be a hole (all bytes
# with value 0x00).
echo "File foo content after log replay:"
od -t x1 $SCRATCH_MNT/foo
# We expect bar to have a size of 253Kb and no extents (any byte read
# from bar has the value 0x00).
echo "File bar content after log replay:"
od -t x1 $SCRATCH_MNT/bar
status=0
exit
The expected file contents in the golden output are:
File foo content after log replay:
0000000 aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa
*
0200000 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
*
0372000
File bar content after log replay:
0000000 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
*
0772000
Without this fix, their contents are:
File foo content after log replay:
0000000 aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa
*
0200000 bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb
*
0372000
File bar content after log replay:
0000000 ee ee ee ee ee ee ee ee ee ee ee ee ee ee ee ee
*
0200000 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
*
0372000 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
*
0772000
A test case submission for fstests follows soon.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Chris Mason <clm@fb.com>
Pull btrfs updates from Chris Mason:
"Outside of our usual batch of fixes, this integrates the subvolume
quota updates that Qu Wenruo from Fujitsu has been working on for a
few releases now. He gets an extra gold star for making btrfs smaller
this time, and fixing a number of quota corners in the process.
Dave Sterba tested and integrated Anand Jain's sysfs improvements.
Outside of exporting a symbol (ack'd by Greg) these are all internal
to btrfs and it's mostly cleanups and fixes. Anand also attached some
of our sysfs objects to our internal device management structs instead
of an object off the super block. It will make device management
easier overall and it's a better fit for how the sysfs files are used.
None of the existing sysfs files are moved around.
Thanks for all the fixes everyone"
* 'for-linus-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: (87 commits)
btrfs: delayed-ref: double free in btrfs_add_delayed_tree_ref()
Btrfs: Check if kobject is initialized before put
lib: export symbol kobject_move()
Btrfs: sysfs: add support to show replacing target in the sysfs
Btrfs: free the stale device
Btrfs: use received_uuid of parent during send
Btrfs: fix use-after-free in btrfs_replay_log
btrfs: wait for delayed iputs on no space
btrfs: qgroup: Make snapshot accounting work with new extent-oriented qgroup.
btrfs: qgroup: Add the ability to skip given qgroup for old/new_roots.
btrfs: ulist: Add ulist_del() function.
btrfs: qgroup: Cleanup the old ref_node-oriented mechanism.
btrfs: qgroup: Switch self test to extent-oriented qgroup mechanism.
btrfs: qgroup: Switch to new extent-oriented qgroup mechanism.
btrfs: qgroup: Switch rescan to new mechanism.
btrfs: qgroup: Add new qgroup calculation function btrfs_qgroup_account_extents().
btrfs: backref: Add special time_seq == (u64)-1 case for btrfs_find_all_roots().
btrfs: qgroup: Add new function to record old_roots.
btrfs: qgroup: Record possible quota-related extent for qgroup.
btrfs: qgroup: Add function qgroup_update_counters().
...
After commit 4f764e5153 ("Btrfs: remove deleted xattrs on fsync log
replay"), we can end up in a situation where during log replay we end up
deleting xattrs that were never deleted when their file was last fsynced.
This happens in the fast fsync path (flag BTRFS_INODE_NEEDS_FULL_SYNC is
not set in the inode) if the inode has the flag BTRFS_INODE_COPY_EVERYTHING
set, the xattr was added in a past transaction and the leaf where the
xattr is located was not updated (COWed or created) in the current
transaction. In this scenario the xattr item never ends up in the log
tree and therefore at log replay time, which makes the replay code delete
the xattr from the fs/subvol tree as it thinks that xattr was deleted
prior to the last fsync.
Fix this by always logging all xattrs, which is the simplest and most
reliable way to detect deleted xattrs and replay the deletes at log replay
time.
This issue is reproducible with the following test case for fstests:
seq=`basename $0`
seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
tmp=/tmp/$$
status=1 # failure is the default!
_cleanup()
{
_cleanup_flakey
rm -f $tmp.*
}
trap "_cleanup; exit \$status" 0 1 2 3 15
# get standard environment, filters and checks
. ./common/rc
. ./common/filter
. ./common/dmflakey
. ./common/attr
# real QA test starts here
# We create a lot of xattrs for a single file. Only btrfs and xfs are currently
# able to store such a large mount of xattrs per file, other filesystems such
# as ext3/4 and f2fs for example, fail with ENOSPC even if we attempt to add
# less than 1000 xattrs with very small values.
_supported_fs btrfs xfs
_supported_os Linux
_need_to_be_root
_require_scratch
_require_dm_flakey
_require_attrs
_require_metadata_journaling $SCRATCH_DEV
rm -f $seqres.full
_scratch_mkfs >> $seqres.full 2>&1
_init_flakey
_mount_flakey
# Create the test file with some initial data and make sure everything is
# durably persisted.
$XFS_IO_PROG -f -c "pwrite -S 0xaa 0 32k" $SCRATCH_MNT/foo | _filter_xfs_io
sync
# Add many small xattrs to our file.
# We create such a large amount because it's needed to trigger the issue found
# in btrfs - we need to have an amount that causes the fs to have at least 3
# btree leafs with xattrs stored in them, and it must work on any leaf size
# (maximum leaf/node size is 64Kb).
num_xattrs=2000
for ((i = 1; i <= $num_xattrs; i++)); do
name="user.attr_$(printf "%04d" $i)"
$SETFATTR_PROG -n $name -v "val_$(printf "%04d" $i)" $SCRATCH_MNT/foo
done
# Sync the filesystem to force a commit of the current btrfs transaction, this
# is a necessary condition to trigger the bug on btrfs.
sync
# Now update our file's data and fsync the file.
# After a successful fsync, if the fsync log/journal is replayed we expect to
# see all the xattrs we added before with the same values (and the updated file
# data of course). Btrfs used to delete some of these xattrs when it replayed
# its fsync log/journal.
$XFS_IO_PROG -c "pwrite -S 0xbb 8K 16K" \
-c "fsync" \
$SCRATCH_MNT/foo | _filter_xfs_io
# Simulate a crash/power loss.
_load_flakey_table $FLAKEY_DROP_WRITES
_unmount_flakey
# Allow writes again and mount. This makes the fs replay its fsync log.
_load_flakey_table $FLAKEY_ALLOW_WRITES
_mount_flakey
echo "File content after crash and log replay:"
od -t x1 $SCRATCH_MNT/foo
echo "File xattrs after crash and log replay:"
for ((i = 1; i <= $num_xattrs; i++)); do
name="user.attr_$(printf "%04d" $i)"
echo -n "$name="
$GETFATTR_PROG --absolute-names -n $name --only-values $SCRATCH_MNT/foo
echo
done
status=0
exit
The golden output expects all xattrs to be available, and with the correct
values, after the fsync log is replayed.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
If we do an append write to a file (which increases its inode's i_size)
that does not have the flag BTRFS_INODE_NEEDS_FULL_SYNC set in its inode,
and the previous transaction added a new hard link to the file, which sets
the flag BTRFS_INODE_COPY_EVERYTHING in the file's inode, and then fsync
the file, the inode's new i_size isn't logged. This has the consequence
that after the fsync log is replayed, the file size remains what it was
before the append write operation, which means users/applications will
not be able to read the data that was successsfully fsync'ed before.
This happens because neither the inode item nor the delayed inode get
their i_size updated when the append write is made - doing so would
require starting a transaction in the buffered write path, something that
we do not do intentionally for performance reasons.
Fix this by making sure that when the flag BTRFS_INODE_COPY_EVERYTHING is
set the inode is logged with its current i_size (log the in-memory inode
into the log tree).
This issue is not a recent regression and is easy to reproduce with the
following test case for fstests:
seq=`basename $0`
seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
here=`pwd`
tmp=/tmp/$$
status=1 # failure is the default!
_cleanup()
{
_cleanup_flakey
rm -f $tmp.*
}
trap "_cleanup; exit \$status" 0 1 2 3 15
# get standard environment, filters and checks
. ./common/rc
. ./common/filter
. ./common/dmflakey
# real QA test starts here
_supported_fs generic
_supported_os Linux
_need_to_be_root
_require_scratch
_require_dm_flakey
_require_metadata_journaling $SCRATCH_DEV
_crash_and_mount()
{
# Simulate a crash/power loss.
_load_flakey_table $FLAKEY_DROP_WRITES
_unmount_flakey
# Allow writes again and mount. This makes the fs replay its fsync log.
_load_flakey_table $FLAKEY_ALLOW_WRITES
_mount_flakey
}
rm -f $seqres.full
_scratch_mkfs >> $seqres.full 2>&1
_init_flakey
_mount_flakey
# Create the test file with some initial data and then fsync it.
# The fsync here is only needed to trigger the issue in btrfs, as it causes the
# the flag BTRFS_INODE_NEEDS_FULL_SYNC to be removed from the btrfs inode.
$XFS_IO_PROG -f -c "pwrite -S 0xaa 0 32k" \
-c "fsync" \
$SCRATCH_MNT/foo | _filter_xfs_io
sync
# Add a hard link to our file.
# On btrfs this sets the flag BTRFS_INODE_COPY_EVERYTHING on the btrfs inode,
# which is a necessary condition to trigger the issue.
ln $SCRATCH_MNT/foo $SCRATCH_MNT/bar
# Sync the filesystem to force a commit of the current btrfs transaction, this
# is a necessary condition to trigger the bug on btrfs.
sync
# Now append more data to our file, increasing its size, and fsync the file.
# In btrfs because the inode flag BTRFS_INODE_COPY_EVERYTHING was set and the
# write path did not update the inode item in the btree nor the delayed inode
# item (in memory struture) in the current transaction (created by the fsync
# handler), the fsync did not record the inode's new i_size in the fsync
# log/journal. This made the data unavailable after the fsync log/journal is
# replayed.
$XFS_IO_PROG -c "pwrite -S 0xbb 32K 32K" \
-c "fsync" \
$SCRATCH_MNT/foo | _filter_xfs_io
echo "File content after fsync and before crash:"
od -t x1 $SCRATCH_MNT/foo
_crash_and_mount
echo "File content after crash and log replay:"
od -t x1 $SCRATCH_MNT/foo
status=0
exit
The expected file output before and after the crash/power failure expects the
appended data to be available, which is:
0000000 aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa
*
0100000 bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb
*
0200000
Cc: stable@vger.kernel.org
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Chris Mason <clm@fb.com>
While the inode cache caching kthread is calling btrfs_unpin_free_ino(),
we could have a concurrent call to btrfs_return_ino() that adds a new
entry to the root's free space cache of pinned inodes. This concurrent
call does not acquire the fs_info->commit_root_sem before adding a new
entry if the caching state is BTRFS_CACHE_FINISHED, which is a problem
because the caching kthread calls btrfs_unpin_free_ino() after setting
the caching state to BTRFS_CACHE_FINISHED and therefore races with
the task calling btrfs_return_ino(), which is adding a new entry, while
the former (caching kthread) is navigating the cache's rbtree, removing
and freeing nodes from the cache's rbtree without acquiring the spinlock
that protects the rbtree.
This race resulted in memory corruption due to double free of struct
btrfs_free_space objects because both tasks can end up doing freeing the
same objects. Note that adding a new entry can result in merging it with
other entries in the cache, in which case those entries are freed.
This is particularly important as btrfs_free_space structures are also
used for the block group free space caches.
This memory corruption can be detected by a debugging kernel, which
reports it with the following trace:
[132408.501148] slab error in verify_redzone_free(): cache `btrfs_free_space': double free detected
[132408.505075] CPU: 15 PID: 12248 Comm: btrfs-ino-cache Tainted: G W 4.1.0-rc5-btrfs-next-10+ #1
[132408.505075] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.8.1-0-g4adadbd-20150316_085822-nilsson.home.kraxel.org 04/01/2014
[132408.505075] ffff880023e7d320 ffff880163d73cd8 ffffffff8145eec7 ffffffff81095dce
[132408.505075] ffff880009735d40 ffff880163d73ce8 ffffffff81154e1e ffff880163d73d68
[132408.505075] ffffffff81155733 ffffffffa054a95a ffff8801b6099f00 ffffffffa0505b5f
[132408.505075] Call Trace:
[132408.505075] [<ffffffff8145eec7>] dump_stack+0x4f/0x7b
[132408.505075] [<ffffffff81095dce>] ? console_unlock+0x356/0x3a2
[132408.505075] [<ffffffff81154e1e>] __slab_error.isra.28+0x25/0x36
[132408.505075] [<ffffffff81155733>] __cache_free+0xe2/0x4b6
[132408.505075] [<ffffffffa054a95a>] ? __btrfs_add_free_space+0x2f0/0x343 [btrfs]
[132408.505075] [<ffffffffa0505b5f>] ? btrfs_unpin_free_ino+0x8e/0x99 [btrfs]
[132408.505075] [<ffffffff810f3b30>] ? time_hardirqs_off+0x15/0x28
[132408.505075] [<ffffffff81084d42>] ? trace_hardirqs_off+0xd/0xf
[132408.505075] [<ffffffff811563a1>] ? kfree+0xb6/0x14e
[132408.505075] [<ffffffff811563d0>] kfree+0xe5/0x14e
[132408.505075] [<ffffffffa0505b5f>] btrfs_unpin_free_ino+0x8e/0x99 [btrfs]
[132408.505075] [<ffffffffa0505e08>] caching_kthread+0x29e/0x2d9 [btrfs]
[132408.505075] [<ffffffffa0505b6a>] ? btrfs_unpin_free_ino+0x99/0x99 [btrfs]
[132408.505075] [<ffffffff8106698f>] kthread+0xef/0xf7
[132408.505075] [<ffffffff810f3b08>] ? time_hardirqs_on+0x15/0x28
[132408.505075] [<ffffffff810668a0>] ? __kthread_parkme+0xad/0xad
[132408.505075] [<ffffffff814653d2>] ret_from_fork+0x42/0x70
[132408.505075] [<ffffffff810668a0>] ? __kthread_parkme+0xad/0xad
[132408.505075] ffff880023e7d320: redzone 1:0x9f911029d74e35b, redzone 2:0x9f911029d74e35b.
[132409.501654] slab: double free detected in cache 'btrfs_free_space', objp ffff880023e7d320
[132409.503355] ------------[ cut here ]------------
[132409.504241] kernel BUG at mm/slab.c:2571!
Therefore fix this by having btrfs_unpin_free_ino() acquire the lock
that protects the rbtree while doing the searches and removing entries.
Fixes: 1c70d8fb4d ("Btrfs: fix inode caching vs tree log")
Cc: stable@vger.kernel.org
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
The free space entries are allocated using kmem_cache_zalloc(),
through __btrfs_add_free_space(), therefore we should use
kmem_cache_free() and not kfree() to avoid any confusion and
any potential problem. Looking at the kfree() definition at
mm/slab.c it has the following comment:
/*
* (...)
*
* Don't free memory not originally allocated by kmalloc()
* or you will run into trouble.
*/
So better be safe and use kmem_cache_free().
Cc: stable@vger.kernel.org
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
Although it is a rare case, we'd better free previous allocated
memory on error.
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
It is introduced by:
c404e0dc2c
Btrfs: fix use-after-free in the finishing procedure of the device replace
But seems no relationship with that bug, this patch revirt these
code block for cleanup.
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
Currently, we can only set a limitation on a qgroup, but we
can not clear it.
This patch provide a choice to user to clear a limitation on
qgroup by passing a value of CLEAR_VALUE(-1) to kernel.
Reported-by: Tsutomu Itoh <t-itoh@jp.fujitsu.com>
Signed-off-by: Dongsheng Yang <yangds.fnst@cn.fujitsu.com>
Tested-by: Tsutomu Itoh <t-itoh@jp.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
Pull core block IO update from Jens Axboe:
"Nothing really major in here, mostly a collection of smaller
optimizations and cleanups, mixed with various fixes. In more detail,
this contains:
- Addition of policy specific data to blkcg for block cgroups. From
Arianna Avanzini.
- Various cleanups around command types from Christoph.
- Cleanup of the suspend block I/O path from Christoph.
- Plugging updates from Shaohua and Jeff Moyer, for blk-mq.
- Eliminating atomic inc/dec of both remaining IO count and reference
count in a bio. From me.
- Fixes for SG gap and chunk size support for data-less (discards)
IO, so we can merge these better. From me.
- Small restructuring of blk-mq shared tag support, freeing drivers
from iterating hardware queues. From Keith Busch.
- A few cfq-iosched tweaks, from Tahsin Erdogan and me. Makes the
IOPS mode the default for non-rotational storage"
* 'for-4.2/core' of git://git.kernel.dk/linux-block: (35 commits)
cfq-iosched: fix other locations where blkcg_to_cfqgd() can return NULL
cfq-iosched: fix sysfs oops when attempting to read unconfigured weights
cfq-iosched: move group scheduling functions under ifdef
cfq-iosched: fix the setting of IOPS mode on SSDs
blktrace: Add blktrace.c to BLOCK LAYER in MAINTAINERS file
block, cgroup: implement policy-specific per-blkcg data
block: Make CFQ default to IOPS mode on SSDs
block: add blk_set_queue_dying() to blkdev.h
blk-mq: Shared tag enhancements
block: don't honor chunk sizes for data-less IO
block: only honor SG gap prevention for merges that contain data
block: fix returnvar.cocci warnings
block, dm: don't copy bios for request clones
block: remove management of bi_remaining when restoring original bi_end_io
block: replace trylock with mutex_lock in blkdev_reread_part()
block: export blkdev_reread_part() and __blkdev_reread_part()
suspend: simplify block I/O handling
block: collapse bio bit space
block: remove unused BIO_RW_BLOCK and BIO_EOF flags
block: remove BIO_EOPNOTSUPP
...
There is a cut and paste error so instead of freeing "head_ref", we free
"ref" twice.
Fixes: 3368d001ba ('btrfs: qgroup: Record possible quota-related extent for qgroup.')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Chris Mason <clm@fb.com>
file_remove_suid() is a misnomer since it removes also file capabilities
stored in xattrs and sets S_NOSEC flag. Also should_remove_suid() tells
something else than whether file_remove_suid() call is necessary which
leads to bugs.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
This patch will add support to show the replacing target in sysfs
during the process of replacement.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
When btrfs on a device is overwritten with a new btrfs (mkfs),
the old btrfs instance in the kernel becomes stale. So with this
patch, if kernel finds device is overwritten then delete the stale
fsid/uuid.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Neil Horman pointed out a problem where if he did something like this
receive A
snap A B
change B
send -p A B
and then on another box do
recieve A
receive B
the receive B would fail because we use the UUID of A for the clone sources for
B. This makes sense most of the time because normally you are sending from the
original sources, not a received source. However when you use a recieved subvol
its UUID is going to be something completely different, so if you then try to
receive the diff on a different volume it won't find the UUID because the new A
will be something else. The only constant is the received uuid. So instead
check to see if we have received_uuid set on the root, and if so use that as the
clone source, as btrfs receive looks for matches either in received_uuid or
uuid. Thanks,
Reported-by: Neil Horman <nhorman@redhat.com>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Reviewed-by: Hugo Mills <hugo@carfax.org.uk>
Signed-off-by: Chris Mason <clm@fb.com>
@log_root_tree should not be referenced after kfree.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.cz>
Reported-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Chris Mason <clm@fb.com>
btrfs will report no_space when we run following write and delete
file loop:
# FILE_SIZE_M=[ 75% of fs space ]
# DEV=[ some dev ]
# MNT=[ some dir ]
#
# mkfs.btrfs -f "$DEV"
# mount -o nodatacow "$DEV" "$MNT"
# for ((i = 0; i < 100; i++)); do dd if=/dev/zero of="$MNT"/file0 bs=1M count="$FILE_SIZE_M"; rm -f "$MNT"/file0; done
#
Reason:
iput() and evict() is run after write pages to block device, if
write pages work is not finished before next write, the "rm"ed space
is not freed, and caused above bug.
Fix:
We can add "-o flushoncommit" mount option to avoid above bug, but
it have performance problem. Actually, we can to wait for on-the-fly
writes only when no-space happened, it is which this patch do.
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
qgroup.
Make snapshot accounting work with new extent-oriented mechanism by
skipping given root in new/old_roots in create_pending_snapshot().
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
This is used by later qgroup fix patches for snapshot.
As current snapshot accounting is done by btrfs_qgroup_inherit(), but
new extent oriented quota mechanism will account extent from
btrfs_copy_root() and other snapshot things, causing wrong result.
So add this ability to handle snapshot accounting.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
This function will delete unode with given (val,aux) pair.
And with this patch, seqnum for debug usage doesn't have any meaning
now, so remove them.
This is used by later patches to skip snapshot root.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
Since the self test transaction don't have delayed_ref_roots, so use
find_all_roots() and export btrfs_qgroup_account_extent() to simulate it
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
Switch from old ref_node based qgroup to extent based qgroup mechanism
for normal operations.
The new mechanism should hugely reduce the overhead of btrfs quota
system, and further more, the codes and logic should be more clean and
easier to maintain.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
Switch rescan to use the new new extent oriented mechanism.
As rescan is also based on extent, new mechanism is just a perfect match
for rescan.
With re-designed internal functions, rescan is quite easy, just call
btrfs_find_all_roots() and then btrfs_qgroup_account_one_extent().
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
btrfs_qgroup_account_extents().
The new btrfs_qgroup_account_extents() function should be called in
btrfs_commit_transaction() and it will update all the qgroup according
to delayed_ref_root->dirty_extent_root.
The new function can handle both normal operation during
commit_transaction() or in rescan in a unified method with clearer
logic.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
btrfs_find_all_roots().
Allow btrfs_find_all_roots() to skip all delayed_ref_head lock and tree
lock to do tree search.
This is important for later qgroup implement which will call
find_all_roots() after fs trees are committed.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
Add function btrfs_qgroup_prepare_account_extents() to get old_roots
which are needed for qgroup.
We do it in commit_transaction() and before switch_roots(), and only
search commit_root, so it gives a quite accurate view for previous
transaction.
With old_roots from previous transaction, we can use it to do accurate
account with current transaction.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
Add hook in add_delayed_ref_head() to record quota-related extent record
into delayed_ref_root->dirty_extent_record rb-tree for later qgroup
accounting.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
Add function qgroup_update_counters(), which will update related
qgroups' rfer/excl according to old/new_roots.
This is one of the two core functions for the new qgroup implement.
This is based on btrfs_adjust_coutners() but with clearer logic and
comment.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
This function is used to update refcnt for qgroups.
And is one of the two core functions used in the new qgroup implement.
This is based on the old update_old/new_refcnt, but provides a unified
logic and behavior.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
__btrfs_inc_extent_ref() and __btrfs_free_extent() have already had too
many parameters, but three of them can be extracted from
btrfs_delayed_ref_node struct.
So use btrfs_delayed_ref_node struct as a single parameter to replace
the bytenr/num_byte/no_quota parameters.
The real objective of this patch is to allow btrfs_qgroup_record_ref()
get the delayed_ref_node in incoming qgroup patches.
Other functions calling btrfs_qgroup_record_ref() are not affected since
the rest will only add/sub exclusive extents, where node is not used.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
Use inline functions to do such things, to improve readability.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Acked-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
Cleanup the rb_tree merge/insert/update functions, since now we use list
instead of rb_tree now.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
This patch replace the rbtree used in ref_head to list.
This has the following advantage:
1) Easier merge logic.
With the new list implement, we only need to care merging the tail
ref_node with the new ref_node.
And this can be done quite easy at insert time, no need to do a
indicated merge at run_delayed_refs().
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
Old __merge_refs() in backref.c will even merge refs whose root_id are
different, which makes qgroup gives wrong result.
Fix it by checking ref_for_same_block() before any mode specific works.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
lockdep report following warning in test:
[25176.843958] =================================
[25176.844519] [ INFO: inconsistent lock state ]
[25176.845047] 4.1.0-rc3 #22 Tainted: G W
[25176.845591] ---------------------------------
[25176.846153] inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage.
[25176.846713] fsstress/26661 [HC0[0]:SC1[1]:HE1:SE0] takes:
[25176.847246] (&wr_ctx->wr_lock){+.?...}, at: [<ffffffffa04cdc6d>] scrub_free_ctx+0x2d/0xf0 [btrfs]
[25176.847838] {SOFTIRQ-ON-W} state was registered at:
[25176.848396] [<ffffffff810bf460>] __lock_acquire+0x6a0/0xe10
[25176.848955] [<ffffffff810bfd1e>] lock_acquire+0xce/0x2c0
[25176.849491] [<ffffffff816489af>] mutex_lock_nested+0x7f/0x410
[25176.850029] [<ffffffffa04d04ff>] scrub_stripe+0x4df/0x1080 [btrfs]
[25176.850575] [<ffffffffa04d11b1>] scrub_chunk.isra.19+0x111/0x130 [btrfs]
[25176.851110] [<ffffffffa04d144c>] scrub_enumerate_chunks+0x27c/0x510 [btrfs]
[25176.851660] [<ffffffffa04d3b87>] btrfs_scrub_dev+0x1c7/0x6c0 [btrfs]
[25176.852189] [<ffffffffa04e918e>] btrfs_dev_replace_start+0x36e/0x450 [btrfs]
[25176.852771] [<ffffffffa04a98e0>] btrfs_ioctl+0x1e10/0x2d20 [btrfs]
[25176.853315] [<ffffffff8121c5b8>] do_vfs_ioctl+0x318/0x570
[25176.853868] [<ffffffff8121c851>] SyS_ioctl+0x41/0x80
[25176.854406] [<ffffffff8164da17>] system_call_fastpath+0x12/0x6f
[25176.854935] irq event stamp: 51506
[25176.855511] hardirqs last enabled at (51506): [<ffffffff810d4ce5>] vprintk_emit+0x225/0x5e0
[25176.856059] hardirqs last disabled at (51505): [<ffffffff810d4b77>] vprintk_emit+0xb7/0x5e0
[25176.856642] softirqs last enabled at (50886): [<ffffffff81067a23>] __do_softirq+0x363/0x640
[25176.857184] softirqs last disabled at (50949): [<ffffffff8106804d>] irq_exit+0x10d/0x120
[25176.857746]
other info that might help us debug this:
[25176.858845] Possible unsafe locking scenario:
[25176.859981] CPU0
[25176.860537] ----
[25176.861059] lock(&wr_ctx->wr_lock);
[25176.861705] <Interrupt>
[25176.862272] lock(&wr_ctx->wr_lock);
[25176.862881]
*** DEADLOCK ***
Reason:
Above warning is caused by:
Interrupt
-> bio_endio()
-> ...
-> scrub_put_ctx()
-> scrub_free_ctx() *1
-> ...
-> mutex_lock(&wr_ctx->wr_lock);
scrub_put_ctx() is allowed to be called in end_bio interrupt, but
in code design, it will never call scrub_free_ctx(sctx) in interrupe
context(above *1), because btrfs_scrub_dev() get one additional
reference of sctx->refs, which makes scrub_free_ctx() only called
withine btrfs_scrub_dev().
Now the code runs out of our wish, because free sequence in
scrub_pending_bio_dec() have a gap.
Current code:
-----------------------------------+-----------------------------------
scrub_pending_bio_dec() | btrfs_scrub_dev
-----------------------------------+-----------------------------------
atomic_dec(&sctx->bios_in_flight); |
wake_up(&sctx->list_wait); |
| scrub_put_ctx()
| -> atomic_dec_and_test(&sctx->refs)
scrub_put_ctx(sctx); |
-> atomic_dec_and_test(&sctx->refs)|
-> scrub_free_ctx() |
-----------------------------------+-----------------------------------
We expected:
-----------------------------------+-----------------------------------
scrub_pending_bio_dec() | btrfs_scrub_dev
-----------------------------------+-----------------------------------
atomic_dec(&sctx->bios_in_flight); |
wake_up(&sctx->list_wait); |
scrub_put_ctx(sctx); |
-> atomic_dec_and_test(&sctx->refs)|
| scrub_put_ctx()
| -> atomic_dec_and_test(&sctx->refs)
| -> scrub_free_ctx()
-----------------------------------+-----------------------------------
Fix:
Move scrub_pending_bio_dec() to a workqueue, to avoid this function run
in interrupt context.
Tested by check tracelog in debug.
Changelog v1->v2:
Use workqueue instead of adjust function call sequence in v1,
because v1 will introduce a bug pointed out by:
Filipe David Manana <fdmanana@gmail.com>
Reported-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
The extent-same code rejects requests with an unaligned length. This
poses a problem when we want to dedupe the tail extent of files as we
skip cloning the portion between i_size and the extent boundary.
If we don't clone the entire extent, it won't be deleted. So the
combination of these behaviors winds up giving us worst-case dedupe on
many files.
We can fix this by allowing a length that extents to i_size and
internally aligining those to the end of the block. This is what
btrfs_ioctl_clone() so we can just copy that check over.
Signed-off-by: Mark Fasheh <mfasheh@suse.de>
Signed-off-by: Chris Mason <clm@fb.com>
max_to_defrag represents the number of pages to defrag rather than the last
page of the file range to be defragged.
Consider a file having 10 4k blocks (i.e. blocks in the range [0 - 9]). If the
defrag ioctl was invoked for the block range [3 - 6], then max_to_defrag
should actually have the value 4. Instead in the current code we end up
setting it to 6.
Now, this does not (yet) cause an issue since the first part of the while loop
condition in btrfs_defrag_file() (i.e. "i <= last_index") causes the control
to flow out of the while loop before any buggy behavior is actually caused. So
the patch just makes sure that max_to_defrag ends up having the right value
rather than fixing a bug. I did run the xfstests suite to make sure that the
code does not regress.
Changelog: v1->v2:
Provide a much descriptive commit message.
Signed-off-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Signed-off-by: Chris Mason <clm@fb.com>
Read-ahead is done for the pages in the range [ra_index, ra_index + cluster -
1]. So the next read-ahead should be starting from the page at index 'ra_index
+ cluster' (unless we deemed that the extent at 'ra_index + cluster' as
non-defraggable) rather than from the page at index 'ra_index +
max_cluster'. This patch fixes this. I did run the xfstests suite to make sure
that the code does not regress.
Signed-off-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Signed-off-by: Chris Mason <clm@fb.com>
When allocating a new chunk or removing one we need to update num_devs
device items and insert or remove a chunk item in the chunk tree, so
in the worst case the space needed in the chunk space_info is:
btrfs_calc_trunc_metadata_size(chunk_root, num_devs) +
btrfs_calc_trans_metadata_size(chunk_root, 1)
That is, in the worst case we need to cow num_devs paths and cow 1 other
path that can result in splitting every node and leaf, and each path
consisting of BTRFS_MAX_LEVEL - 1 nodes and 1 leaf. We were requiring
some additional chunk_root->nodesize * BTRFS_MAX_LEVEL * num_devs bytes,
which were unnecessary since updating the existing device items does
not result in splitting the nodes and leaf since after updating them
they remain with the same size.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
We don't need to attach ordered extents that have completed to the current
transaction. Doing so only makes us hold memory for longer than necessary
and delaying the iput of the inode until the transaction is committed (for
each created ordered extent we do an igrab and then schedule an asynchronous
iput when the ordered extent's reference count drops to 0), preventing the
inode from being evictable until the transaction commits.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
Commit 3a8b36f378 ("Btrfs: fix data loss in the fast fsync path") added
a performance regression for that causes an unnecessary sync of the log
trees (fs/subvol and root log trees) when 2 consecutive fsyncs are done
against a file, without no writes or any metadata updates to the inode in
between them and if a transaction is committed before the second fsync is
called.
Huang Ying reported this to lkml (https://lkml.org/lkml/2015/3/18/99)
after a test sysbench test that measured a -62% decrease of file io
requests per second for that tests' workload.
The test is:
echo performance > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor
echo performance > /sys/devices/system/cpu/cpu1/cpufreq/scaling_governor
echo performance > /sys/devices/system/cpu/cpu2/cpufreq/scaling_governor
echo performance > /sys/devices/system/cpu/cpu3/cpufreq/scaling_governor
mkfs -t btrfs /dev/sda2
mount -t btrfs /dev/sda2 /fs/sda2
cd /fs/sda2
for ((i = 0; i < 1024; i++)); do fallocate -l 67108864 testfile.$i; done
sysbench --test=fileio --max-requests=0 --num-threads=4 --max-time=600 \
--file-test-mode=rndwr --file-total-size=68719476736 --file-io-mode=sync \
--file-num=1024 run
A test on kvm guest, running a debug kernel gave me the following results:
Without 3a8b36f378: 16.01 reqs/sec
With 3a8b36f378: 3.39 reqs/sec
With 3a8b36f378 and this patch: 16.04 reqs/sec
Reported-by: Huang Ying <ying.huang@intel.com>
Tested-by: Huang, Ying <ying.huang@intel.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
Zygo Blaxell and other users have reported occasional hangs while an
inode is being evicted, leading to traces like the following:
[ 5281.972322] INFO: task rm:20488 blocked for more than 120 seconds.
[ 5281.973836] Not tainted 4.0.0-rc5-btrfs-next-9+ #2
[ 5281.974818] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 5281.976364] rm D ffff8800724cfc38 0 20488 7747 0x00000000
[ 5281.977506] ffff8800724cfc38 ffff8800724cfc38 ffff880065da5c50 0000000000000001
[ 5281.978461] ffff8800724cffd8 ffff8801540a5f50 0000000000000008 ffff8801540a5f78
[ 5281.979541] ffff8801540a5f50 ffff8800724cfc58 ffffffff8143107e 0000000000000123
[ 5281.981396] Call Trace:
[ 5281.982066] [<ffffffff8143107e>] schedule+0x74/0x83
[ 5281.983341] [<ffffffffa03b33cf>] wait_on_state+0xac/0xcd [btrfs]
[ 5281.985127] [<ffffffff81075cd6>] ? signal_pending_state+0x31/0x31
[ 5281.986715] [<ffffffffa03b4b71>] wait_extent_bit.constprop.32+0x7c/0xde [btrfs]
[ 5281.988680] [<ffffffffa03b540b>] lock_extent_bits+0x5d/0x88 [btrfs]
[ 5281.990200] [<ffffffffa03a621d>] btrfs_evict_inode+0x24e/0x5be [btrfs]
[ 5281.991781] [<ffffffff8116964d>] evict+0xa0/0x148
[ 5281.992735] [<ffffffff8116a43d>] iput+0x18f/0x1e5
[ 5281.993796] [<ffffffff81160d4a>] do_unlinkat+0x15b/0x1fa
[ 5281.994806] [<ffffffff81435b54>] ? ret_from_sys_call+0x1d/0x58
[ 5281.996120] [<ffffffff8107d314>] ? trace_hardirqs_on_caller+0x18f/0x1ab
[ 5281.997562] [<ffffffff8123960b>] ? trace_hardirqs_on_thunk+0x3a/0x3f
[ 5281.998815] [<ffffffff81161a16>] SyS_unlinkat+0x29/0x2b
[ 5281.999920] [<ffffffff81435b32>] system_call_fastpath+0x12/0x17
[ 5282.001299] 1 lock held by rm/20488:
[ 5282.002066] #0: (sb_writers#12){.+.+.+}, at: [<ffffffff8116dd81>] mnt_want_write+0x24/0x4b
This happens when we have readahead, which calls readpages(), happening
right before the inode eviction handler is invoked. So the reason is
essentially:
1) readpages() is called while a reference on the inode is held, so
eviction can not be triggered before readpages() returns. It also
locks one or more ranges in the inode's io_tree (which is done at
extent_io.c:__do_contiguous_readpages());
2) readpages() submits several read bios, all with an end io callback
that runs extent_io.c:end_bio_extent_readpage() and that is executed
by other task when a bio finishes, corresponding to a work queue
(fs_info->end_io_workers) worker kthread. This callback unlocks
the ranges in the inode's io_tree that were previously locked in
step 1;
3) readpages() returns, the reference on the inode is dropped;
4) One or more of the read bios previously submitted are still not
complete (their end io callback was not yet invoked or has not
yet finished execution);
5) Inode eviction is triggered (through an unlink call for example).
The inode reference count was not incremented before submitting
the read bios, therefore this is possible;
6) The eviction handler starts executing and enters the loop that
iterates over all extent states in the inode's io_tree;
7) The loop picks one extent state record and uses its ->start and
->end fields, after releasing the inode's io_tree spinlock, to
call lock_extent_bits() and clear_extent_bit(). The call to lock
the range [state->start, state->end] blocks because the whole
range or a part of it was locked by the previous call to
readpages() and the corresponding end io callback, which unlocks
the range was not yet executed;
8) The end io callback for the read bio is executed and unlocks the
range [state->start, state->end] (or a superset of that range).
And at clear_extent_bit() the extent_state record state is used
as a second argument to split_state(), which sets state->start to
a larger value;
9) The task executing the eviction handler is woken up by the task
executing the bio's end io callback (through clear_state_bit) and
the eviction handler locks the range
[old value for state->start, state->end]. Shortly after, when
calling clear_extent_bit(), it unlocks the range
[new value for state->start, state->end], so it ends up unlocking
only part of the range that it locked, leaving an extent state
record in the io_tree that represents the unlocked subrange;
10) The eviction handler loop, in its next iteration, gets the
extent_state record for the subrange that it did not unlock in the
previous step and then tries to lock it, resulting in an hang.
So fix this by not using the ->start and ->end fields of an existing
extent_state record. This is a simple solution, and an alternative
could be to bump the inode's reference count before submitting each
read bio and having it dropped in the bio's end io callback. But that
would be a more invasive/complex change and would not protect against
other possible places that are not holding a reference on the inode
as well. Something to consider in the future.
Many thanks to Zygo Blaxell for reporting, in the mailing list, the
issue, a set of scripts to trigger it and testing this fix.
Reported-by: Zygo Blaxell <ce3g8jdj@umail.furryterror.org>
Tested-by: Zygo Blaxell <ce3g8jdj@umail.furryterror.org>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
The return value of read_tree_block() can confuse callers as it always
returns NULL for either -ENOMEM or -EIO, so it's likely that callers
parse it to a wrong error, for instance, in btrfs_read_tree_root().
This fixes the above issue.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
read_tree_block may take a reference on the 'eb', a following
free_extent_buffer is necessary.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
After commit 8407f55326
("Btrfs: fix data corruption after fast fsync and writeback error"),
during wait_ordered_extents(), we wait for ordered extent setting
BTRFS_ORDERED_IO_DONE or BTRFS_ORDERED_IOERR, at which point we've
already got checksum information, so we don't need to check
(csum_bytes_left == 0) in the whole logging path.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Chris Mason <clm@fb.com>
Unlike when attempting to allocate a new block group, where we check
that we have enough space in the system space_info to update the device
items and insert a new chunk item in the chunk tree, we were not checking
if the system space_info had enough space for updating the device items
and deleting the chunk item in the chunk tree. This often lead to -ENOSPC
error when attempting to allocate blocks for the chunk tree (during btree
node/leaf COW operations) while updating the device items or deleting the
chunk item, which resulted in the current transaction being aborted and
turning the filesystem into read-only mode.
While running fstests generic/038, which stresses allocation of block
groups and removal of unused block groups, with a large scratch device
(750Gb) this happened often, despite more than enough unallocated space,
and resulted in the following trace:
[68663.586604] WARNING: CPU: 3 PID: 1521 at fs/btrfs/super.c:260 __btrfs_abort_transaction+0x52/0x114 [btrfs]()
[68663.600407] BTRFS: Transaction aborted (error -28)
(...)
[68663.730829] Call Trace:
[68663.732585] [<ffffffff8142fa46>] dump_stack+0x4f/0x7b
[68663.734334] [<ffffffff8108b6a2>] ? console_unlock+0x361/0x3ad
[68663.739980] [<ffffffff81045ea5>] warn_slowpath_common+0xa1/0xbb
[68663.757153] [<ffffffffa036ca6d>] ? __btrfs_abort_transaction+0x52/0x114 [btrfs]
[68663.760925] [<ffffffff81045f05>] warn_slowpath_fmt+0x46/0x48
[68663.762854] [<ffffffffa03b159d>] ? btrfs_update_device+0x15a/0x16c [btrfs]
[68663.764073] [<ffffffffa036ca6d>] __btrfs_abort_transaction+0x52/0x114 [btrfs]
[68663.765130] [<ffffffffa03b3638>] btrfs_remove_chunk+0x597/0x5ee [btrfs]
[68663.765998] [<ffffffffa0384663>] ? btrfs_delete_unused_bgs+0x245/0x296 [btrfs]
[68663.767068] [<ffffffffa0384676>] btrfs_delete_unused_bgs+0x258/0x296 [btrfs]
[68663.768227] [<ffffffff8143527f>] ? _raw_spin_unlock_irq+0x2d/0x4c
[68663.769081] [<ffffffffa038b109>] cleaner_kthread+0x13d/0x16c [btrfs]
[68663.799485] [<ffffffffa038afcc>] ? btrfs_alloc_root+0x28/0x28 [btrfs]
[68663.809208] [<ffffffff8105f367>] kthread+0xef/0xf7
[68663.828795] [<ffffffff810e603f>] ? time_hardirqs_on+0x15/0x28
[68663.844942] [<ffffffff8105f278>] ? __kthread_parkme+0xad/0xad
[68663.846486] [<ffffffff81435a88>] ret_from_fork+0x58/0x90
[68663.847760] [<ffffffff8105f278>] ? __kthread_parkme+0xad/0xad
[68663.849503] ---[ end trace 798477c6d6dbaad6 ]---
[68663.850525] BTRFS: error (device sdc) in btrfs_remove_chunk:2652: errno=-28 No space left
So fix this by verifying that enough space exists in system space_info,
and reserving the space in the chunk block reserve, before attempting to
delete the block group and allocate a new system chunk if we don't have
enough space to perform the necessary updates and delete in the chunk
tree. Like for the block group creation case, we don't error our if we
fail to allocate a new system chunk, since we might end up not needing
it (no node/leaf splits happen during the COW operations and/or we end
up not needing to COW any btree nodes or leafs because they were already
COWed in the current transaction and their writeback didn't start yet).
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
While creating a block group, we often end up getting ENOSPC while updating
the chunk tree, which leads to a transaction abortion that produces a trace
like the following:
[30670.116368] WARNING: CPU: 4 PID: 20735 at fs/btrfs/super.c:260 __btrfs_abort_transaction+0x52/0x106 [btrfs]()
[30670.117777] BTRFS: Transaction aborted (error -28)
(...)
[30670.163567] Call Trace:
[30670.163906] [<ffffffff8142fa46>] dump_stack+0x4f/0x7b
[30670.164522] [<ffffffff8108b6a2>] ? console_unlock+0x361/0x3ad
[30670.165171] [<ffffffff81045ea5>] warn_slowpath_common+0xa1/0xbb
[30670.166323] [<ffffffffa035daa7>] ? __btrfs_abort_transaction+0x52/0x106 [btrfs]
[30670.167213] [<ffffffff81045f05>] warn_slowpath_fmt+0x46/0x48
[30670.167862] [<ffffffffa035daa7>] __btrfs_abort_transaction+0x52/0x106 [btrfs]
[30670.169116] [<ffffffffa03743d7>] btrfs_create_pending_block_groups+0x101/0x130 [btrfs]
[30670.170593] [<ffffffffa038426a>] __btrfs_end_transaction+0x84/0x366 [btrfs]
[30670.171960] [<ffffffffa038455c>] btrfs_end_transaction+0x10/0x12 [btrfs]
[30670.174649] [<ffffffffa036eb6b>] btrfs_check_data_free_space+0x11f/0x27c [btrfs]
[30670.176092] [<ffffffffa039450d>] btrfs_fallocate+0x7c8/0xb96 [btrfs]
[30670.177218] [<ffffffff812459f2>] ? __this_cpu_preempt_check+0x13/0x15
[30670.178622] [<ffffffff81152447>] vfs_fallocate+0x14c/0x1de
[30670.179642] [<ffffffff8116b915>] ? __fget_light+0x2d/0x4f
[30670.180692] [<ffffffff81152863>] SyS_fallocate+0x47/0x62
[30670.186737] [<ffffffff81435b32>] system_call_fastpath+0x12/0x17
[30670.187792] ---[ end trace 0373e6b491c4a8cc ]---
This is because we don't do proper space reservation for the chunk block
reserve when we have multiple tasks allocating chunks in parallel.
So block group creation has 2 phases, and the first phase essentially
checks if there is enough space in the system space_info, allocating a
new system chunk if there isn't, while the second phase updates the
device, extent and chunk trees. However, because the updates to the
chunk tree happen in the second phase, if we have N tasks, each with
its own transaction handle, allocating new chunks in parallel and if
there is only enough space in the system space_info to allocate M chunks,
where M < N, none of the tasks ends up allocating a new system chunk in
the first phase and N - M tasks will get -ENOSPC when attempting to
update the chunk tree in phase 2 if they need to COW any nodes/leafs
from the chunk tree.
Fix this by doing proper reservation in the chunk block reserve.
The issue could be reproduced by running fstests generic/038 in a loop,
which eventually triggered the problem.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
Now that we're guaranteed to have a meaningful root dentry, we can just
export seq_dentry() and use it in btrfs_show_options(). The subvolume ID
is easy to get and can also be useful, so put that in there, too.
Reviewed-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Omar Sandoval <osandov@osandov.com>
Signed-off-by: Chris Mason <clm@fb.com>
Currently, mounting a subvolume with subvolid= takes a different code
path than mounting with subvol=. This isn't really a big deal except for
the fact that mounts done with subvolid= or the default subvolume don't
have a dentry that's connected to the dentry tree like in the subvol=
case. To unify the code paths, when given subvolid= or using the default
subvolume ID, translate it into a subvolume name by walking
ROOT_BACKREFs in the root tree and INODE_REFs in the filesystem trees.
Reviewed-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Omar Sandoval <osandov@osandov.com>
Signed-off-by: Chris Mason <clm@fb.com>
There's nothing to stop a user from passing both subvol= and subvolid=
to mount, but if they don't refer to the same subvolume, someone is
going to be surprised at some point. Error out on this case, but allow
users to pass in both if they do match (which they could, for example,
get out of /proc/mounts).
Reviewed-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Omar Sandoval <osandov@osandov.com>
Signed-off-by: Chris Mason <clm@fb.com>
In preparation for new functionality in mount_subvol(), give it
ownership of subvol_name and tidy up the error paths.
Reviewed-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Omar Sandoval <osandov@osandov.com>
Signed-off-by: Chris Mason <clm@fb.com>
Currently, setup_root_args() substitutes 's/subvol=[^,]*/subvolid=0/'.
But, this means that if the user passes both a subvol and subvolid for
some reason, we won't actually mount the top-level when we recursively
mount. For example, consider:
mkfs.btrfs -f /dev/sdb
mount /dev/sdb /mnt
btrfs subvol create /mnt/subvol1 # subvolid=257
btrfs subvol create /mnt/subvol2 # subvolid=258
umount /mnt
mount -osubvol=/subvol1,subvolid=258 /dev/sdb /mnt
In the final mount, subvol=/subvol1,subvolid=258 becomes
subvolid=0,subvolid=258, and the last option takes precedence, so we
mount subvol2 and try to look up subvol1 inside of it, which fails.
So, instead, do a thorough scan through the argument list and remove any
subvol= and subvolid= options, then append subvolid=0 to the end. This
implicitly makes subvol= take precedence over subvolid=, but we're about
to add a stricter check for that. This also makes setup_root_args() more
generic, which we'll need soon.
Reviewed-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Omar Sandoval <osandov@osandov.com>
Signed-off-by: Chris Mason <clm@fb.com>
Since commit 0723a0473f ("btrfs: allow mounting btrfs subvolumes with
different ro/rw options"), when mounting a subvolume read/write when
another subvolume has previously been mounted read-only, we first do a
remount. However, this should be done with the superblock locked, as per
sync_filesystem():
/*
* We need to be protected against the filesystem going from
* r/o to r/w or vice versa.
*/
WARN_ON(!rwsem_is_locked(&sb->s_umount));
This WARN_ON can easily be hit with:
mkfs.btrfs -f /dev/vdb
mount /dev/vdb /mnt
btrfs subvol create /mnt/vol1
btrfs subvol create /mnt/vol2
umount /mnt
mount -oro,subvol=/vol1 /dev/vdb /mnt
mount -orw,subvol=/vol2 /dev/vdb /mnt2
Fixes: 0723a0473f ("btrfs: allow mounting btrfs subvolumes with different ro/rw options")
Reviewed-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Omar Sandoval <osandov@osandov.com>
Signed-off-by: Chris Mason <clm@fb.com>
When we clear an extent state's EXTENT_LOCKED bit with clear_extent_bits()
through free_io_failure(), we weren't waking up any tasks waiting for the
extent's state EXTENT_LOCKED bit, leading to an hang.
So make sure clear_extent_bits() ends up waking up any waiters if the
bit EXTENT_LOCKED is supplied by its callers.
Zygo Blaxell was experiencing such hangs at inode eviction time after
file unlinks. Thanks to him for a set of scripts to reproduce the issue.
Reported-by: Zygo Blaxell <ce3g8jdj@umail.furryterror.org>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Chris Mason <clm@fb.com>
With commit 1b98450816 ("Btrfs: fix find_free_dev_extent() malfunction
in case device tree has hole") introduced in the kernel 4.1 merge window,
we end up using part of a device hole for which there are already pending
chunks or pinned chunks. Before that commit we didn't use the hole and
would just move on to the next hole in the device.
However when we adjust the start offset for the chunk allocation and we
have pinned chunks, we set it blindly to the end offset of the pinned
chunk we are currently processing, which is dangerous because we can
have a pending chunk that has a start offset that matches the end offset
of our pinned chunk - leading us to a case where we end up getting two
pending chunks that start at the same physical device offset, which makes
us later abort the current transaction with -EEXIST when finishing the
chunk allocation at btrfs_create_pending_block_groups():
[194737.659017] ------------[ cut here ]------------
[194737.660192] WARNING: CPU: 15 PID: 31111 at fs/btrfs/super.c:260 __btrfs_abort_transaction+0x52/0x106 [btrfs]()
[194737.662209] BTRFS: Transaction aborted (error -17)
[194737.663175] Modules linked in: btrfs dm_snapshot dm_bufio dm_flakey dm_mod crc32c_generic xor raid6_pq nfsd auth_rpcgss oid_registry nfs_acl nfs lockd grace fscache sunrpc loop fuse
[194737.674015] CPU: 15 PID: 31111 Comm: xfs_io Tainted: G W 4.0.0-rc5-btrfs-next-9+ #2
[194737.675986] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.7.5-0-ge51488c-20140602_164612-nilsson.home.kraxel.org 04/01/2014
[194737.682999] 0000000000000009 ffff8800564c7a98 ffffffff8142fa46 ffffffff8108b6a2
[194737.684540] ffff8800564c7ae8 ffff8800564c7ad8 ffffffff81045ea5 ffff8800564c7b78
[194737.686017] ffffffffa0383aa7 00000000ffffffef ffff88000c7ba000 ffff8801a1f66f40
[194737.687509] Call Trace:
[194737.688068] [<ffffffff8142fa46>] dump_stack+0x4f/0x7b
[194737.689027] [<ffffffff8108b6a2>] ? console_unlock+0x361/0x3ad
[194737.690095] [<ffffffff81045ea5>] warn_slowpath_common+0xa1/0xbb
[194737.691198] [<ffffffffa0383aa7>] ? __btrfs_abort_transaction+0x52/0x106 [btrfs]
[194737.693789] [<ffffffff81045f05>] warn_slowpath_fmt+0x46/0x48
[194737.695065] [<ffffffffa0383aa7>] __btrfs_abort_transaction+0x52/0x106 [btrfs]
[194737.696806] [<ffffffffa039a3bd>] btrfs_create_pending_block_groups+0x101/0x130 [btrfs]
[194737.698683] [<ffffffffa03aa433>] __btrfs_end_transaction+0x84/0x366 [btrfs]
[194737.700329] [<ffffffffa03aa725>] btrfs_end_transaction+0x10/0x12 [btrfs]
[194737.701924] [<ffffffffa0394b51>] btrfs_check_data_free_space+0x11f/0x27c [btrfs]
[194737.703675] [<ffffffffa03b8ba4>] __btrfs_buffered_write+0x16a/0x4c8 [btrfs]
[194737.705417] [<ffffffffa03bb502>] ? btrfs_file_write_iter+0x19a/0x431 [btrfs]
[194737.707058] [<ffffffffa03bb511>] ? btrfs_file_write_iter+0x1a9/0x431 [btrfs]
[194737.708560] [<ffffffffa03bb68d>] btrfs_file_write_iter+0x325/0x431 [btrfs]
[194737.710673] [<ffffffff81067d85>] ? get_parent_ip+0xe/0x3e
[194737.712076] [<ffffffff811534c3>] new_sync_write+0x7c/0xa0
[194737.713293] [<ffffffff81153b58>] vfs_write+0xb2/0x117
[194737.714443] [<ffffffff81154424>] SyS_pwrite64+0x64/0x82
[194737.715646] [<ffffffff81435b32>] system_call_fastpath+0x12/0x17
[194737.717175] ---[ end trace f2d5dc04e56d7e48 ]---
[194737.718170] BTRFS: error (device sdc) in btrfs_create_pending_block_groups:9524: errno=-17 Object already exists
The -EEXIST failure comes from btrfs_finish_chunk_alloc(), called by
btrfs_create_pending_block_groups(), when it attempts to insert a
duplicated device extent item via btrfs_alloc_dev_extent().
This issue was reproducible with fstests generic/038 running in a loop for
several hours (it's very hard to hit) and using MOUNT_OPTIONS="-o discard".
Applying Jeff's recent patch titled "btrfs: add missing discards when
unpinning extents with -o discard" makes the issue much easier to reproduce
(usually within 4 to 5 hours), since it pins chunks for longer periods of
time when an unused block group is deleted by the cleaner kthread.
Fix this by making sure that we never adjust the start offset to a lower
value than it currently has.
Fixes: 1b98450816 ("Btrfs: fix find_free_dev_extent() malfunction in case device tree has hole"
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
__btrfs_close_devices() would call_rcu to free the device, which is racy with
list_for_each_entry() accessing the memory to retrieve the next device on the
list.
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
The INO_LOOKUP ioctl can lookup path for a given inode number and is
thus restricted. As a sideefect it can find the root id of the
containing subvolume and we're using this int the 'btrfs inspect rootid'
command.
The restriction is unnecessary in case we set the ioctl args
args::treeid = 0
args::objectid = 256 (BTRFS_FIRST_FREE_OBJECTID)
Then the path will be empty and the treeid is filled with the root id of
the inode on which the ioctl is called. This behaviour is unchanged,
after the root restriction is removed.
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
Report missing device when add is successful,
otherwise it would exit as ENOMEM. And add uuid
to the report.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
Old csum type check is wrong and can't catch csum_type 1(not supported).
Fix it to avoid hostile 0 division.
Reported-by: Lukas Lueg <lukas.lueg@gmail.com>
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
Marc reported a problem where the receiving end of an incremental send
was performing clone operations that failed with -EINVAL. This happened
because, unlike for uncompressed extents, we were not checking if the
source clone offset and length, after summing the data offset, falls
within the source file's boundaries.
So make sure we do such checks when attempting to issue clone operations
for compressed extents.
Problem reproducible with the following steps:
$ mkfs.btrfs -f /dev/sdb
$ mount -o compress /dev/sdb /mnt
$ mkfs.btrfs -f /dev/sdc
$ mount -o compress /dev/sdc /mnt2
# Create the file with a single extent of 128K. This creates a metadata file
# extent item with a data start offset of 0 and a logical length of 128K.
$ xfs_io -f -c "pwrite -S 0xaa 64K 128K" -c "fsync" /mnt/foo
# Now rewrite the range 64K to 112K of our file. This will make the inode's
# metadata continue to point to the 128K extent we created before, but now
# with an extent item that points to the extent with a data start offset of
# 112K and a logical length of 16K.
# That metadata file extent item is associated with the logical file offset
# at 176K and covers the logical file range 176K to 192K.
$ xfs_io -c "pwrite -S 0xbb 64K 112K" -c "fsync" /mnt/foo
# Now rewrite the range 180K to 12K. This will make the inode's metadata
# continue to point the the 128K extent we created earlier, with a single
# extent item that points to it with a start offset of 112K and a logical
# length of 4K.
# That metadata file extent item is associated with the logical file offset
# at 176K and covers the logical file range 176K to 180K.
$ xfs_io -c "pwrite -S 0xcc 180K 12K" -c "fsync" /mnt/foo
$ btrfs subvolume snapshot -r /mnt /mnt/snap1
$ touch /mnt/bar
# Calls the btrfs clone ioctl.
$ ~/xfstests/src/cloner -s $((176 * 1024)) -d $((176 * 1024)) \
-l $((4 * 1024)) /mnt/foo /mnt/bar
$ btrfs subvolume snapshot -r /mnt /mnt/snap2
$ btrfs send /mnt/snap1 | btrfs receive /mnt2
At subvol /mnt/snap1
At subvol snap1
$ btrfs send -p /mnt/snap1 /mnt/snap2 | btrfs receive /mnt2
At subvol /mnt/snap2
At snapshot snap2
ERROR: failed to clone extents to bar
Invalid argument
A test case for fstests follows soon.
Reported-by: Marc MERLIN <marc@merlins.org>
Tested-by: Marc MERLIN <marc@merlins.org>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Tested-by: David Sterba <dsterba@suse.cz>
Tested-by: Jan Alexander Steffens (heftig) <jan.steffens@gmail.com>
Signed-off-by: Chris Mason <clm@fb.com>
Commit 9c8b35b1ba ("btrfs: quota: Automatically update related qgroups or
mark INCONSISTENT flags when assigning/deleting a qgroup relations.")
introduced the allocation of a temporary ulist in function
btrfs_add_qgroup_relation() and added the corresponding cleanup to the out
path. However, the allocation was introduced before the src/dst level check
that directly returns. Fix the possible leakage of the ulist by moving the
allocation after the input validation. Detected by Coverity CID 1295988.
Signed-off-by: Christian Engelmayer <cengelma@gmx.at>
Reviewed-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
If the call to btrfs_truncate_inode_items() failed and we don't have a block
group, we were unlocking the cache_write_mutex without having locked it (we
do it only if we have a block group).
Fixes: 1bbc621ef2 ("Btrfs: allow block group cache writeout
outside critical section in commit")
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
fs/btrfs/volumes.c: In function ‘btrfs_create_uuid_tree’:
fs/btrfs/volumes.c:3909:3: warning: format ‘%d’ expects argument of type ‘int’, but argument 4 has type ‘long int’ [-Wformat=]
btrfs_abort_transaction(trans, tree_root,
^
CC [M] fs/btrfs/ioctl.o
fs/btrfs/ioctl.c: In function ‘create_subvol’:
fs/btrfs/ioctl.c:549:3: warning: format ‘%d’ expects argument of type ‘int’, but argument 4 has type ‘long int’ [-Wformat=]
btrfs_abort_transaction(trans, root, PTR_ERR(new_root));
PTR_ERR returns long, but we're really using 'int' for the error codes
everywhere so just set and use the local variable.
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
The annotated functios will be placed into .text.unlikely section. The
annotation also hints compiler to move the code out of the hot paths,
and may implicitly mark if-statement leading to that block as unlikely.
This is a heuristic, the impact on the generated code is not
significant.
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
WARN is called from a single location and all bugreports say that's in
super.c __btrfs_abort_transaction. This is slightly confusing as we'd
rather want to know the exact callsite. Whereas this information is
printed in the syslog below the stacktrace, this requires further look
and we usually see only the headline from WARNING.
Moving the WARN into the macro has to inline some code and increases
code by a few kilobytes:
text data bss dec hex filename
835481 20305 14120 869906 d4612 btrfs.ko.before
842883 20305 14120 877308 d62fc btrfs.ko.after
The delta is +7k (130+ calls), measured on 3.19 x86_64, distro config.
The increase is not small and could lead to worse icache use. The code
is on error/exit paths that can be recognized by compiler as cold and
moved out of the way so the impact is speculated to be low, if
measurable at all.
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
Long time ago (2008) the defrag was automatic for new b-tree writes but
has been disabled after performance problems. There was a leftover in
tree-defrag.c that effectively stops any defragmentation on b-trees.
This is a bit unexpected and IMHO undesired. The SSD mode is an
optimization and defrag is supposed to work if the users asks for it.
Related commits:
6702ed490c
Btrfs: Add run time btree defrag, and an ioctl to force btree defrag
e18e4809b1
Btrfs: Add mount -o ssd, which includes optimizations for seek free
storage
b3236e68bf
Btrfs: Leave on the tree defragger in mount -o ssd, it still helps there
9afbb0b752
Btrfs: Disable tree defrag in SSD mode
The last three commits switch the defrag+ssd off/on/off and the last one
3f157a2fd2
Btrfs: Online btree defragmentation fixes
misses the bits from tree-defrag.c to revert to the behaviour introduced
in e18e4809b1.
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
When we shrink the usable size of a device (its total_bytes), we go over
all the device extent items in the device tree and attempt to relocate
the chunk of any device extent that goes beyond the new usable size for
the device. We do that after setting the new usable size (total_bytes) in
the device object, so that all new allocations (and reallocations) don't
use areas of the device that go beyond the new (shorter) size. However we
were not considering that before setting the new size in the device,
pending chunks might have been created that use device extents that go
beyond the new size, and those device extents are not yet in the device
tree after we search the device tree - they are still attached to the
list of new block group for some ongoing transaction handle, and they are
only added to the device tree when the transaction handle is ended (via
btrfs_create_pending_block_groups()).
So check for pending chunks with device extents that go beyond the new
size and if any exists, commit the current transaction and repeat the
search in the device tree.
Not doing this it would mean we would return success to user space while
still having extents that go beyond the new size, and later user space
could override those locations on the device while the fs still references
them, causing all sorts of corruption and unexpected events.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
Since commit bafc9b754f ("vfs: More precise tests in d_invalidate"),
mounted subvolumes can be deleted because d_invalidate() won't fail.
However, we run into problems when we attempt to delete the default
subvolume while it is mounted as the root filesystem:
# btrfs subvol list /
ID 257 gen 306 top level 5 path rootvol
ID 267 gen 334 top level 5 path snap1
# btrfs subvol get-default /
ID 267 gen 334 top level 5 path snap1
# btrfs inspect-internal rootid /
267
# mount -o subvol=/ /dev/vda1 /mnt
# btrfs subvol del /mnt/snap1
Delete subvolume (no-commit): '/mnt/snap1'
ERROR: cannot delete '/mnt/snap1' - Operation not permitted
# findmnt /
findmnt: can't read /proc/mounts: No such file or directory
# ls /proc
#
Markus reported that this same scenario simply led to a kernel oops.
This happens because in btrfs_ioctl_snap_destroy(), we call
d_invalidate() before we check may_destroy_subvol(), which means that we
detach the submounts and drop the dentry before erroring out. Instead,
we should only invalidate the dentry once the deletion has succeeded.
Additionally, the shrink_dcache_sb() isn't necessary; d_invalidate()
will prune the dcache for the deleted subvolume.
Cc: <stable@vger.kernel.org>
Fixes: bafc9b754f ("vfs: More precise tests in d_invalidate")
Reported-by: Markus Schauler <mschauler@gmail.com>
Signed-off-by: Omar Sandoval <osandov@osandov.com>
Signed-off-by: Chris Mason <clm@fb.com>
If a directory inode is orphanized, because some inode previously
processed has a new name that collides with the old name of the current
inode, we need to check if it needs its rename operation delayed too,
as its ancestor-descendent relationship with some other inode might
have been reversed between the parent and send snapshots and therefore
its rename operation needs to happen after that other inode is renamed.
For example, for the following reproducer where this is needed (provided
by Robbie Ko):
$ mkfs.btrfs -f /dev/sdb
$ mount /dev/sdb /mnt
$ mkfs.btrfs -f /dev/sdc
$ mount /dev/sdc /mnt2
$ mkdir -p /mnt/data/n1/n2
$ mkdir /mnt/data/n4
$ mkdir -p /mnt/data/t6/t7
$ mkdir /mnt/data/t5
$ mkdir /mnt/data/t7
$ mkdir /mnt/data/n4/t2
$ mkdir /mnt/data/t4
$ mkdir /mnt/data/t3
$ mv /mnt/data/t7 /mnt/data/n4/t2
$ mv /mnt/data/t4 /mnt/data/n4/t2/t7
$ mv /mnt/data/t5 /mnt/data/n4/t2/t7/t4
$ mv /mnt/data/t6 /mnt/data/n4/t2/t7/t4/t5
$ mv /mnt/data/n1/n2 /mnt/data/n4/t2/t7/t4/t5/t6
$ mv /mnt/data/n1 /mnt/data/n4/t2/t7/t4/t5/t6
$ mv /mnt/data/n4/t2/t7/t4/t5/t6/t7 /mnt/data/n4/t2/t7/t4/t5/t6/n2
$ mv /mnt/data/t3 /mnt/data/n4/t2/t7/t4/t5/t6/n2/t7
$ btrfs subvolume snapshot -r /mnt /mnt/snap1
$ mv /mnt/data/n4/t2/t7/t4/t5/t6/n1 /mnt/data/n4
$ mv /mnt/data/n4/t2 /mnt/data/n4/n1
$ mv /mnt/data/n4/n1/t2/t7/t4/t5/t6/n2 /mnt/data/n4/n1/t2
$ mv /mnt/data/n4/n1/t2/n2/t7/t3 /mnt/data/n4/n1/t2
$ mv /mnt/data/n4/n1/t2/t7/t4/t5/t6 /mnt/data/n4/n1/t2
$ mv /mnt/data/n4/n1/t2/t7/t4 /mnt/data/n4/n1/t2/t6
$ mv /mnt/data/n4/n1/t2/t7 /mnt/data/n4/n1/t2/t3
$ mv /mnt/data/n4/n1/t2/n2/t7 /mnt/data/n4/n1/t2
$ btrfs subvolume snapshot -r /mnt /mnt/snap2
$ btrfs send /mnt/snap1 | btrfs receive /mnt2
$ btrfs send -p /mnt/snap1 /mnt/snap2 | btrfs receive /mnt2
ERROR: send ioctl failed with -12: Cannot allocate memory
Where the parent snapshot directory hierarchy is the following:
. (ino 256)
|-- data/ (ino 257)
|-- n4/ (ino 260)
|-- t2/ (ino 265)
|-- t7/ (ino 264)
|-- t4/ (ino 266)
|-- t5/ (ino 263)
|-- t6/ (ino 261)
|-- n1/ (ino 258)
|-- n2/ (ino 259)
|-- t7/ (ino 262)
|-- t3/ (ino 267)
And the send snapshot's directory hierarchy is the following:
. (ino 256)
|-- data/ (ino 257)
|-- n4/ (ino 260)
|-- n1/ (ino 258)
|-- t2/ (ino 265)
|-- n2/ (ino 259)
|-- t3/ (ino 267)
| |-- t7 (ino 264)
|
|-- t6/ (ino 261)
| |-- t4/ (ino 266)
| |-- t5/ (ino 263)
|
|-- t7/ (ino 262)
While processing inode 262 we orphanize inode 264 and later attempt
to rename inode 264 to its new name/location, which resulted in building
an incorrect destination path string for the rename operation with the
value "data/n4/t2/t7/t4/t5/t6/n2/t7/t3/t7". This rename operation must
have been done only after inode 267 is processed and renamed, as the
ancestor-descendent relationship between inodes 264 and 267 was reversed
between both snapshots, because otherwise it results in an infinite loop
when building the path string for inode 264 when we are processing an
inode with a number larger than 264. That loop is the following:
start inode 264, send progress of 265 for example
parent of 264 -> 267
parent of 267 -> 262
parent of 262 -> 259
parent of 259 -> 261
parent of 261 -> 263
parent of 263 -> 266
parent of 266 -> 264
|--> back to first iteration while current path string length
is <= PATH_MAX, and fail with -ENOMEM otherwise
So fix this by making the check if we need to delay a directory rename
regardless of the current inode having been orphanized or not.
A test case for fstests follows soon.
Thanks to Robbie Ko for providing a reproducer for this problem.
Reported-by: Robbie Ko <robbieko@synology.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Even though we delay the rename of directories when they become
descendents of other directories that were also renamed in the send
root to prevent infinite path build loops, we were doing it in cases
where this was not needed and was actually harmful resulting in
infinite path build loops as we ended up with a circular dependency
of delayed directory renames.
Consider the following reproducer:
$ mkfs.btrfs -f /dev/sdb
$ mount /dev/sdb /mnt
$ mkfs.btrfs -f /dev/sdc
$ mount /dev/sdc /mnt2
$ mkdir /mnt/data
$ mkdir /mnt/data/n1
$ mkdir /mnt/data/n1/n2
$ mkdir /mnt/data/n4
$ mkdir /mnt/data/n1/n2/p1
$ mkdir /mnt/data/n1/n2/p1/p2
$ mkdir /mnt/data/t6
$ mkdir /mnt/data/t7
$ mkdir -p /mnt/data/t5/t7
$ mkdir /mnt/data/t2
$ mkdir /mnt/data/t4
$ mkdir -p /mnt/data/t1/t3
$ mkdir /mnt/data/p1
$ mv /mnt/data/t1 /mnt/data/p1
$ mkdir -p /mnt/data/p1/p2
$ mv /mnt/data/t4 /mnt/data/p1/p2/t1
$ mv /mnt/data/t5 /mnt/data/n4/t5
$ mv /mnt/data/n1/n2/p1/p2 /mnt/data/n4/t5/p2
$ mv /mnt/data/t7 /mnt/data/n4/t5/p2/t7
$ mv /mnt/data/t2 /mnt/data/n4/t1
$ mv /mnt/data/p1 /mnt/data/n4/t5/p2/p1
$ mv /mnt/data/n1/n2 /mnt/data/n4/t5/p2/p1/p2/n2
$ mv /mnt/data/n4/t5/p2/p1/p2/t1 /mnt/data/n4/t5/p2/p1/p2/n2/t1
$ mv /mnt/data/n4/t5/t7 /mnt/data/n4/t5/p2/p1/p2/n2/t1/t7
$ mv /mnt/data/n4/t5/p2/p1/t1/t3 /mnt/data/n4/t5/p2/p1/p2/n2/t1/t3
$ mv /mnt/data/n4/t5/p2/p1/p2/n2/p1 /mnt/data/n4/t5/p2/p1/p2/n2/t1/t7/p1
$ mv /mnt/data/t6 /mnt/data/n4/t5/p2/p1/p2/n2/t1/t3/t5
$ mv /mnt/data/n4/t5/p2/p1/t1 /mnt/data/n4/t5/p2/p1/p2/n2/t1/t3/t1
$ mv /mnt/data/n1 /mnt/data/n4/t5/p2/p1/p2/n2/t1/t7/p1/n1
$ btrfs subvolume snapshot -r /mnt /mnt/snap1
$ mv /mnt/data/n4/t1 /mnt/data/n4/t5/p2/p1/p2/n2/t1/t7/p1/t1
$ mv /mnt/data/n4/t5/p2/p1/p2/n2/t1 /mnt/data/n4/
$ mv /mnt/data/n4/t5/p2/p1/p2/n2 /mnt/data/n4/t1/n2
$ mv /mnt/data/n4/t1/t7/p1 /mnt/data/n4/t1/n2/p1
$ mv /mnt/data/n4/t1/t3/t1 /mnt/data/n4/t1/n2/t1
$ mv /mnt/data/n4/t1/t3 /mnt/data/n4/t1/n2/t1/t3
$ mv /mnt/data/n4/t5/p2/p1/p2 /mnt/data/n4/t1/n2/p1/p2
$ mv /mnt/data/n4/t1/t7 /mnt/data/n4/t1/n2/p1/t7
$ mv /mnt/data/n4/t5/p2/p1 /mnt/data/n4/t1/n2/p1/p2/p1
$ mv /mnt/data/n4/t1/n2/t1/t3/t5 /mnt/data/n4/t1/n2/p1/p2/t5
$ mv /mnt/data/n4/t5 /mnt/data/n4/t1/n2/p1/p2/p1/t5
$ mv /mnt/data/n4/t1/n2/p1/p2/p1/t5/p2 /mnt/data/n4/t1/n2/p1/p2/p1/p2
$ mv /mnt/data/n4/t1/n2/p1/p2/p1/p2/t7 /mnt/data/n4/t1/t7
$ btrfs subvolume snapshot -r /mnt /mnt/snap2
$ btrfs send /mnt/snap1 | btrfs receive /mnt2
$ btrfs send -p /mnt/snap1 /mnt/snap2 | btrfs receive -vv /mnt2
ERROR: send ioctl failed with -12: Cannot allocate memory
This reproducer resulted in an infinite path build loop when building the
path for inode 266 because the following circular dependency of delayed
directory renames was created:
ino 272 <- ino 261 <- ino 259 <- ino 268 <- ino 267 <- ino 261
Where the notation "X <- Y" means the rename of inode X is delayed by the
rename of inode Y (X will be renamed after Y is renamed). This resulted
in an infinite path build loop of inode 266 because that inode has inode
261 as an ancestor in the send root and inode 261 is in the circular
dependency of delayed renames listed above.
Fix this by not delaying the rename of a directory inode if an ancestor of
the inode in the send root, which has a delayed rename operation, is not
also a descendent of the inode in the parent root.
Thanks to Robbie Ko for sending the reproducer example.
A test case for xfstests follows soon.
Reported-by: Robbie Ko <robbieko@synology.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
To support seed sysfs layout and represent seed fsid under
the sprout we need the facility to create fsid under the
specified parent.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
btrfs_kobj_add_device() does not need fs_info any more.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Just a helper function to clean up the sysfs fsid kobjects.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
This patch will provide a framework and help to create attributes
from the structure btrfs_fs_devices which are available even before
fs_info is created. So by moving the parent kobject super_kobj from
fs_info to btrfs_fs_devices, it will help to create attributes
from the btrfs_fs_devices as well.
Patches on top of this patch now will be able to create the
sys/fs/btrfs/fsid kobject and attributes from btrfs_fs_devices
when devices are scanned and registered to the kernel.
Just to note, this does not change any of the existing btrfs sysfs
external kobject names and its attributes and not even the life
cycle of them. Changes are internal only. And to ensure the same,
this path has been tested with various device operations and,
checking and comparing the sysfs kobjects and attributes with
sysfs kobject and attributes with out this patch, and they remain
same.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Separate device kobject and its attribute creation so that device
kobject can be created from the device discovery thread.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
As of now btrfs_attrs are provided using the default_attrs through
the kset. Separate them and create the default_attrs using the
sysfs_create_files instead. By doing this we will have the
flexibility that device discovery thread could create fsid
kobject.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
We need it in a seperate function so that it can be called from the
device discovery thread as well.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
As of now the order in which the kobjects are created
at btrfs_sysfs_add_one() is..
fsid
features
unknown features (dynamic features)
devices.
Since we would move fsid and device kobject to fs_devices
from fs_info structure, this patch will reorder in which
the kobjects are created as below.
fsid
devices
features
unknown features (dynamic features)
And hence the btrfs_sysfs_remove_one() will follow the same
in reverse order. and the device kobject destroy now can
be moved into the function __btrfs_sysfs_remove_one()
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Since the failure code in the btrfs_sysfs_add_one() can
call btrfs_sysfs_remove_one() even before device_dir_kobj
has been created we need to check if its null.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
The sysfs clean up self test like in the below code fails, since
fs_info->device_dir_kobject still points to its stale kobject.
Reseting this pointer will help to fix this.
open_ctree()
{
ret = btrfs_sysfs_add_one(fs_info);
::
+ btrfs_sysfs_remove_one(fs_info);
+ ret = btrfs_sysfs_add_one(fs_info);
+ if (ret) {
+ pr_err("BTRFS: failed to init sysfs interface: %d\n", ret);
+ goto fail_block_groups;
+ }
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Theoritically need to remove the device links attributes, but since its entire device
kobject was removed, so there wasn't any issue of about it. Just do it nicely.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
kobject_unregister is to handle the release of the kobject,
its completion init is being called in btrfs_sysfs_add_one(),
so we don't have to do the same in the open_ctree() again.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
The following test case fails indicating that, thread tried to init an initialized object.
kernel: [232104.016513] kobject (ffff880006c1c980): tried to init an initialized object, something is seriously wrong.
btrfs_sysfs_remove_one() self test code:
open_tree()
{
::
ret = btrfs_sysfs_add_one(fs_info);
if (ret) {
pr_err("BTRFS: failed to init sysfs interface: %d\n", ret);
goto fail_block_groups;
}
+ btrfs_sysfs_remove_one(fs_info);
+ ret = btrfs_sysfs_add_one(fs_info);
+ if (ret) {
+ pr_err("BTRFS: failed to init sysfs interface: %d\n", ret);
+ goto fail_block_groups;
+ }
cleaning up the unregistered kobject fixes this.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Pull btrfs fixes from Chris Mason:
"I fixed up a regression from 4.0 where conversion between different
raid levels would sometimes bail out without converting.
Filipe tracked down a race where it was possible to double allocate
chunks on the drive.
Mark has a fix for fiemap. All three will get bundled off for stable
as well"
* 'for-linus-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
Btrfs: fix regression in raid level conversion
Btrfs: fix racy system chunk allocation when setting block group ro
btrfs: clear 'ret' in btrfs_check_shared() loop
Commit c4cf5261 ("bio: skip atomic inc/dec of ->bi_remaining for
non-chains") regressed all existing callers that followed this pattern:
1) saving a bio's original bi_end_io
2) wiring up an intermediate bi_end_io
3) restoring the original bi_end_io from intermediate bi_end_io
4) calling bio_endio() to execute the restored original bi_end_io
The regression was due to BIO_CHAIN only ever getting set if
bio_inc_remaining() is called. For the above pattern it isn't set until
step 3 above (step 2 would've needed to establish BIO_CHAIN). As such
the first bio_endio(), in step 2 above, never decremented __bi_remaining
before calling the intermediate bi_end_io -- leaving __bi_remaining with
the value 1 instead of 0. When bio_inc_remaining() occurred during step
3 it brought it to a value of 2. When the second bio_endio() was
called, in step 4 above, it should've called the original bi_end_io but
it didn't because there was an extra reference that wasn't dropped (due
to atomic operations being optimized away since BIO_CHAIN wasn't set
upfront).
Fix this issue by removing the __bi_remaining management complexity for
all callers that use the above pattern -- bio_chain() is the only
interface that _needs_ to be concerned with __bi_remaining. For the
above pattern callers just expect the bi_end_io they set to get called!
Remove bio_endio_nodec() and also remove all bio_inc_remaining() calls
that aren't associated with the bio_chain() interface.
Also, the bio_inc_remaining() interface has been moved local to bio.c.
Fixes: c4cf5261 ("bio: skip atomic inc/dec of ->bi_remaining for non-chains")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Commit 2f0810880f changed
btrfs_set_block_group_ro to avoid trying to allocate new chunks with the
new raid profile during conversion. This fixed failures when there was
no space on the drive to allocate a new chunk, but the metadata
reserves were sufficient to continue the conversion.
But this ended up causing a regression when the drive had plenty of
space to allocate new chunks, mostly because reduce_alloc_profile isn't
using the new raid profile.
Fixing btrfs_reduce_alloc_profile is a bigger patch. For now, do a
partial revert of 2f0810880, and don't error out if we hit ENOSPC.
Signed-off-by: Chris Mason <clm@fb.com>
Tested-by: Dave Sterba <dsterba@suse.cz>
Reported-by: Holger Hoffstaette <holger.hoffstaette@googlemail.com>
If while setting a block group read-only we end up allocating a system
chunk, through check_system_chunk(), we were not doing it while holding
the chunk mutex which is a problem if a concurrent chunk allocation is
happening, through do_chunk_alloc(), as it means both block groups can
end up using the same logical addresses and physical regions in the
device(s). So make sure we hold the chunk mutex.
Cc: stable@vger.kernel.org # 4.0+
Fixes: 2f0810880f ("btrfs: delete chunk allocation attemp when
setting block group ro")
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
btrfs_check_shared() is leaking a return value of '1' from
find_parent_nodes(). As a result, callers (in this case, extent_fiemap())
are told extents are shared when they are not. This in turn broke fiemap on
btrfs for kernels v3.18 and up.
The fix is simple - we just have to clear 'ret' after we are done processing
the results of find_parent_nodes().
It wasn't clear to me at first what was happening with return values in
btrfs_check_shared() and find_parent_nodes() - thanks to Josef for the help
on irc. I added documentation to both functions to make things more clear
for the next hacker who might come across them.
If we could queue this up for -stable too that would be great.
Signed-off-by: Mark Fasheh <mfasheh@suse.de>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
Since the big barrier rewrite/removal in 2007 we never fail FLUSH or
FUA requests, which means we can remove the magic BIO_EOPNOTSUPP flag
to help propagating those to the buffer_head layer.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@fb.com>
Pull btrfs fixes from Chris Mason:
"The first commit is a fix from Filipe for a very old extent buffer
reuse race that triggered a BUG_ON. It hasn't come up often, I looked
through old logs at FB and we hit it a handful of times over the last
year.
The rest are other corners he hit during testing"
* 'for-linus-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
Btrfs: fix race when reusing stale extent buffers that leads to BUG_ON
Btrfs: fix race between block group creation and their cache writeout
Btrfs: fix panic when starting bg cache writeout after IO error
Btrfs: fix crash after inode cache writeback failure
There's a race between releasing extent buffers that are flagged as stale
and recycling them that makes us it the following BUG_ON at
btrfs_release_extent_buffer_page:
BUG_ON(extent_buffer_under_io(eb))
The BUG_ON is triggered because the extent buffer has the flag
EXTENT_BUFFER_DIRTY set as a consequence of having been reused and made
dirty by another concurrent task.
Here follows a sequence of steps that leads to the BUG_ON.
CPU 0 CPU 1 CPU 2
path->nodes[0] == eb X
X->refs == 2 (1 for the tree, 1 for the path)
btrfs_header_generation(X) == current trans id
flag EXTENT_BUFFER_DIRTY set on X
btrfs_release_path(path)
unlocks X
reads eb X
X->refs incremented to 3
locks eb X
btrfs_del_items(X)
X becomes empty
clean_tree_block(X)
clear EXTENT_BUFFER_DIRTY from X
btrfs_del_leaf(X)
unlocks X
extent_buffer_get(X)
X->refs incremented to 4
btrfs_free_tree_block(X)
X's range is not pinned
X's range added to free
space cache
free_extent_buffer_stale(X)
lock X->refs_lock
set EXTENT_BUFFER_STALE on X
release_extent_buffer(X)
X->refs decremented to 3
unlocks X->refs_lock
btrfs_release_path()
unlocks X
free_extent_buffer(X)
X->refs becomes 2
__btrfs_cow_block(Y)
btrfs_alloc_tree_block()
btrfs_reserve_extent()
find_free_extent()
gets offset == X->start
btrfs_init_new_buffer(X->start)
btrfs_find_create_tree_block(X->start)
alloc_extent_buffer(X->start)
find_extent_buffer(X->start)
finds eb X in radix tree
free_extent_buffer(X)
lock X->refs_lock
test X->refs == 2
test bit EXTENT_BUFFER_STALE is set
test !extent_buffer_under_io(eb)
increments X->refs to 3
mark_extent_buffer_accessed(X)
check_buffer_tree_ref(X)
--> does nothing,
X->refs >= 2 and
EXTENT_BUFFER_TREE_REF
is set in X
clear EXTENT_BUFFER_STALE from X
locks X
btrfs_mark_buffer_dirty()
set_extent_buffer_dirty(X)
check_buffer_tree_ref(X)
--> does nothing, X->refs >= 2 and
EXTENT_BUFFER_TREE_REF is set
sets EXTENT_BUFFER_DIRTY on X
test and clear EXTENT_BUFFER_TREE_REF
decrements X->refs to 2
release_extent_buffer(X)
decrements X->refs to 1
unlock X->refs_lock
unlock X
free_extent_buffer(X)
lock X->refs_lock
release_extent_buffer(X)
decrements X->refs to 0
btrfs_release_extent_buffer_page(X)
BUG_ON(extent_buffer_under_io(X))
--> EXTENT_BUFFER_DIRTY set on X
Fix this by making find_extent buffer wait for any ongoing task currently
executing free_extent_buffer()/free_extent_buffer_stale() if the extent
buffer has the stale flag set.
A more clean alternative would be to always increment the extent buffer's
reference count while holding its refs_lock spinlock but find_extent_buffer
is a performance critical area and that would cause lock contention whenever
multiple tasks search for the same extent buffer concurrently.
A build server running a SLES 12 kernel (3.12 kernel + over 450 upstream
btrfs patches backported from newer kernels) was hitting this often:
[1212302.461948] kernel BUG at ../fs/btrfs/extent_io.c:4507!
(...)
[1212302.470219] CPU: 1 PID: 19259 Comm: bs_sched Not tainted 3.12.36-38-default #1
[1212302.540792] Hardware name: Supermicro PDSM4/PDSM4, BIOS 6.00 04/17/2006
[1212302.540792] task: ffff8800e07e0100 ti: ffff8800d6412000 task.ti: ffff8800d6412000
[1212302.540792] RIP: 0010:[<ffffffffa0507081>] [<ffffffffa0507081>] btrfs_release_extent_buffer_page.constprop.51+0x101/0x110 [btrfs]
(...)
[1212302.630008] Call Trace:
[1212302.630008] [<ffffffffa05070cd>] release_extent_buffer+0x3d/0xa0 [btrfs]
[1212302.630008] [<ffffffffa04c2d9d>] btrfs_release_path+0x1d/0xa0 [btrfs]
[1212302.630008] [<ffffffffa04c5c7e>] read_block_for_search.isra.33+0x13e/0x3a0 [btrfs]
[1212302.630008] [<ffffffffa04c8094>] btrfs_search_slot+0x3f4/0xa80 [btrfs]
[1212302.630008] [<ffffffffa04cf5d8>] lookup_inline_extent_backref+0xf8/0x630 [btrfs]
[1212302.630008] [<ffffffffa04d13dd>] __btrfs_free_extent+0x11d/0xc40 [btrfs]
[1212302.630008] [<ffffffffa04d64a4>] __btrfs_run_delayed_refs+0x394/0x11d0 [btrfs]
[1212302.630008] [<ffffffffa04db379>] btrfs_run_delayed_refs.part.66+0x69/0x280 [btrfs]
[1212302.630008] [<ffffffffa04ed2ad>] __btrfs_end_transaction+0x2ad/0x3d0 [btrfs]
[1212302.630008] [<ffffffffa04f7505>] btrfs_evict_inode+0x4a5/0x500 [btrfs]
[1212302.630008] [<ffffffff811b9e28>] evict+0xa8/0x190
[1212302.630008] [<ffffffff811b0330>] do_unlinkat+0x1a0/0x2b0
I was also able to reproduce this on a 3.19 kernel, corresponding to Chris'
integration branch from about a month ago, running the following stress
test on a qemu/kvm guest (with 4 virtual cpus and 16Gb of ram):
while true; do
mkfs.btrfs -l 4096 -f -b `expr 20 \* 1024 \* 1024 \* 1024` /dev/sdd
mount /dev/sdd /mnt
snapshot_cmd="btrfs subvolume snapshot -r /mnt"
snapshot_cmd="$snapshot_cmd /mnt/snap_\`date +'%H_%M_%S_%N'\`"
fsstress -d /mnt -n 25000 -p 8 -x "$snapshot_cmd" -X 100
umount /mnt
done
Which usually triggers the BUG_ON within less than 24 hours:
[49558.618097] ------------[ cut here ]------------
[49558.619732] kernel BUG at fs/btrfs/extent_io.c:4551!
(...)
[49558.620031] CPU: 3 PID: 23908 Comm: fsstress Tainted: G W 3.19.0-btrfs-next-7+ #3
[49558.620031] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.7.5-0-ge51488c-20140602_164612-nilsson.home.kraxel.org 04/01/2014
[49558.620031] task: ffff8800319fc0d0 ti: ffff880220da8000 task.ti: ffff880220da8000
[49558.620031] RIP: 0010:[<ffffffffa0476b1a>] [<ffffffffa0476b1a>] btrfs_release_extent_buffer_page+0x20/0xe9 [btrfs]
(...)
[49558.620031] Call Trace:
[49558.620031] [<ffffffffa0476c73>] release_extent_buffer+0x90/0xd3 [btrfs]
[49558.620031] [<ffffffff8142b10c>] ? _raw_spin_lock+0x3b/0x43
[49558.620031] [<ffffffffa0477052>] ? free_extent_buffer+0x37/0x94 [btrfs]
[49558.620031] [<ffffffffa04770ab>] free_extent_buffer+0x90/0x94 [btrfs]
[49558.620031] [<ffffffffa04396d5>] btrfs_release_path+0x4a/0x69 [btrfs]
[49558.620031] [<ffffffffa0444907>] __btrfs_free_extent+0x778/0x80c [btrfs]
[49558.620031] [<ffffffffa044a485>] __btrfs_run_delayed_refs+0xad2/0xc62 [btrfs]
[49558.728054] [<ffffffff811420d5>] ? kmemleak_alloc_recursive.constprop.52+0x16/0x18
[49558.728054] [<ffffffffa044c1e8>] btrfs_run_delayed_refs+0x6d/0x1ba [btrfs]
[49558.728054] [<ffffffffa045917f>] ? join_transaction.isra.9+0xb9/0x36b [btrfs]
[49558.728054] [<ffffffffa045a75c>] btrfs_commit_transaction+0x4c/0x981 [btrfs]
[49558.728054] [<ffffffffa0434f86>] btrfs_sync_fs+0xd5/0x10d [btrfs]
[49558.728054] [<ffffffff81155923>] ? iterate_supers+0x60/0xc4
[49558.728054] [<ffffffff8117966a>] ? do_sync_work+0x91/0x91
[49558.728054] [<ffffffff8117968a>] sync_fs_one_sb+0x20/0x22
[49558.728054] [<ffffffff81155939>] iterate_supers+0x76/0xc4
[49558.728054] [<ffffffff811798e8>] sys_sync+0x55/0x83
[49558.728054] [<ffffffff8142bbd2>] system_call_fastpath+0x12/0x17
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
So creating a block group has 2 distinct phases:
Phase 1 - creates the btrfs_block_group_cache item and adds it to the
rbtree fs_info->block_group_cache_tree and to the corresponding list
space_info->block_groups[];
Phase 2 - adds the block group item to the extent tree and corresponding
items to the chunk tree.
The first phase adds the block_group_cache_item to a list of pending block
groups in the transaction handle, and phase 2 happens when
btrfs_end_transaction() is called against the transaction handle.
It happens that once phase 1 completes, other concurrent tasks that use
their own transaction handle, but points to the same running transaction
(struct btrfs_trans_handle->transaction), can use this block group for
space allocations and therefore mark it dirty. Dirty block groups are
tracked in a list belonging to the currently running transaction (struct
btrfs_transaction) and not in the transaction handle (btrfs_trans_handle).
This is a problem because once a task calls btrfs_commit_transaction(),
it calls btrfs_start_dirty_block_groups() which will see all dirty block
groups and attempt to start their writeout, including those that are
still attached to the transaction handle of some concurrent task that
hasn't called btrfs_end_transaction() yet - which means those block
groups haven't gone through phase 2 yet and therefore when
write_one_cache_group() is called, it won't find the block group items
in the extent tree and abort the current transaction with -ENOENT,
turning the fs into readonly mode and require a remount.
Fix this by ignoring -ENOENT when looking for block group items in the
extent tree when we attempt to start the writeout of the block group
caches outside the critical section of the transaction commit. We will
try again later during the critical section and if there we still don't
find the block group item in the extent tree, we then abort the current
transaction.
This issue happened twice, once while running fstests btrfs/067 and once
for btrfs/078, which produced the following trace:
[ 3278.703014] WARNING: CPU: 7 PID: 18499 at fs/btrfs/super.c:260 __btrfs_abort_transaction+0x52/0x114 [btrfs]()
[ 3278.707329] BTRFS: Transaction aborted (error -2)
(...)
[ 3278.731555] Call Trace:
[ 3278.732396] [<ffffffff8142fa46>] dump_stack+0x4f/0x7b
[ 3278.733860] [<ffffffff8108b6a2>] ? console_unlock+0x361/0x3ad
[ 3278.735312] [<ffffffff81045ea5>] warn_slowpath_common+0xa1/0xbb
[ 3278.736874] [<ffffffffa03ada6d>] ? __btrfs_abort_transaction+0x52/0x114 [btrfs]
[ 3278.738302] [<ffffffff81045f05>] warn_slowpath_fmt+0x46/0x48
[ 3278.739520] [<ffffffffa03ada6d>] __btrfs_abort_transaction+0x52/0x114 [btrfs]
[ 3278.741222] [<ffffffffa03b9e56>] write_one_cache_group+0xae/0xbf [btrfs]
[ 3278.742797] [<ffffffffa03c487b>] btrfs_start_dirty_block_groups+0x170/0x2b2 [btrfs]
[ 3278.744492] [<ffffffffa03d309c>] btrfs_commit_transaction+0x130/0x9c9 [btrfs]
[ 3278.746084] [<ffffffff8107d33d>] ? trace_hardirqs_on+0xd/0xf
[ 3278.747249] [<ffffffffa03e5660>] btrfs_sync_file+0x313/0x387 [btrfs]
[ 3278.748744] [<ffffffff8117acad>] vfs_fsync_range+0x95/0xa4
[ 3278.749958] [<ffffffff81435b54>] ? ret_from_sys_call+0x1d/0x58
[ 3278.751218] [<ffffffff8117acd8>] vfs_fsync+0x1c/0x1e
[ 3278.754197] [<ffffffff8117ae54>] do_fsync+0x34/0x4e
[ 3278.755192] [<ffffffff8117b07c>] SyS_fsync+0x10/0x14
[ 3278.756236] [<ffffffff81435b32>] system_call_fastpath+0x12/0x17
[ 3278.757366] ---[ end trace 9a4d4df4969709aa ]---
Fixes: 1bbc621ef2 ("Btrfs: allow block group cache writeout
outside critical section in commit")
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
When waiting for the writeback of block group cache we returned
immediately if there was an error during writeback without waiting
for the ordered extent to complete. This left a short time window
where if some other task attempts to start the writeout for the same
block group cache it can attempt to add a new ordered extent, starting
at the same offset (0) before the previous one is removed from the
ordered tree, causing an ordered tree panic (calls BUG()).
This normally doesn't happen in other write paths, such as buffered
writes or direct IO writes for regular files, since before marking
page ranges dirty we lock the ranges and wait for any ordered extents
within the range to complete first.
Fix this by making btrfs_wait_ordered_range() not return immediately
if it gets an error from the writeback, waiting for all ordered extents
to complete first.
This issue happened often when running the fstest btrfs/088 and it's
easy to trigger it by running in a loop until the panic happens:
for ((i = 1; i <= 10000; i++)) do ./check btrfs/088 ; done
[17156.862573] BTRFS critical (device sdc): panic in ordered_data_tree_panic:70: Inconsistency in ordered tree at offset 0 (errno=-17 Object already exists)
[17156.864052] ------------[ cut here ]------------
[17156.864052] kernel BUG at fs/btrfs/ordered-data.c:70!
(...)
[17156.864052] Call Trace:
[17156.864052] [<ffffffffa03876e3>] btrfs_add_ordered_extent+0x12/0x14 [btrfs]
[17156.864052] [<ffffffffa03787e2>] run_delalloc_nocow+0x5bf/0x747 [btrfs]
[17156.864052] [<ffffffffa03789ff>] run_delalloc_range+0x95/0x353 [btrfs]
[17156.864052] [<ffffffffa038b7fe>] writepage_delalloc.isra.16+0xb9/0x13f [btrfs]
[17156.864052] [<ffffffffa038d75b>] __extent_writepage+0x129/0x1f7 [btrfs]
[17156.864052] [<ffffffffa038da5a>] extent_write_cache_pages.isra.15.constprop.28+0x231/0x2f4 [btrfs]
[17156.864052] [<ffffffff810ad2af>] ? __module_text_address+0x12/0x59
[17156.864052] [<ffffffff8107d33d>] ? trace_hardirqs_on+0xd/0xf
[17156.864052] [<ffffffffa038df76>] extent_writepages+0x4b/0x5c [btrfs]
[17156.864052] [<ffffffff81144431>] ? kmem_cache_free+0x9b/0xce
[17156.864052] [<ffffffffa0376a46>] ? btrfs_submit_direct+0x3fc/0x3fc [btrfs]
[17156.864052] [<ffffffffa0389cd6>] ? free_extent_state+0x8c/0xc1 [btrfs]
[17156.864052] [<ffffffffa0374871>] btrfs_writepages+0x28/0x2a [btrfs]
[17156.864052] [<ffffffff8110c4c8>] do_writepages+0x23/0x2c
[17156.864052] [<ffffffff81102f36>] __filemap_fdatawrite_range+0x5a/0x61
[17156.864052] [<ffffffff81102f6e>] filemap_fdatawrite_range+0x13/0x15
[17156.864052] [<ffffffffa0383ef7>] btrfs_fdatawrite_range+0x21/0x48 [btrfs]
[17156.864052] [<ffffffffa03ab89e>] __btrfs_write_out_cache.isra.14+0x2d9/0x3a7 [btrfs]
[17156.864052] [<ffffffffa03ac1ab>] ? btrfs_write_out_cache+0x41/0xdc [btrfs]
[17156.864052] [<ffffffffa03ac1fd>] btrfs_write_out_cache+0x93/0xdc [btrfs]
[17156.864052] [<ffffffffa0363847>] ? btrfs_start_dirty_block_groups+0x13a/0x2b2 [btrfs]
[17156.864052] [<ffffffffa03638e6>] btrfs_start_dirty_block_groups+0x1d9/0x2b2 [btrfs]
[17156.864052] [<ffffffff8107d33d>] ? trace_hardirqs_on+0xd/0xf
[17156.864052] [<ffffffffa037209e>] btrfs_commit_transaction+0x130/0x9c9 [btrfs]
[17156.864052] [<ffffffffa034c748>] btrfs_sync_fs+0xe1/0x12d [btrfs]
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
If the writeback of an inode cache failed we were unnecessarilly
attempting to release again the delalloc metadata that we previously
reserved. However attempting to do this a second time triggers an
assertion at drop_outstanding_extent() because we have no more
outstanding extents for our inode cache's inode. If we were able
to start writeback of the cache the reserved metadata space is
released at btrfs_finished_ordered_io(), even if an error happens
during writeback.
So make sure we don't repeat the metadata space release if writeback
started for our inode cache.
This issue was trivial to reproduce by running the fstest btrfs/088
with "-o inode_cache", which triggered the assertion leading to a
BUG() call and requiring a reboot in order to run the remaining
fstests. Trace produced by btrfs/088:
[255289.385904] BTRFS: assertion failed: BTRFS_I(inode)->outstanding_extents >= num_extents, file: fs/btrfs/extent-tree.c, line: 5276
[255289.388094] ------------[ cut here ]------------
[255289.389184] kernel BUG at fs/btrfs/ctree.h:4057!
[255289.390125] invalid opcode: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC
(...)
[255289.392068] Call Trace:
[255289.392068] [<ffffffffa035e774>] drop_outstanding_extent+0x3d/0x6d [btrfs]
[255289.392068] [<ffffffffa0364988>] btrfs_delalloc_release_metadata+0x54/0xe3 [btrfs]
[255289.392068] [<ffffffffa03b4174>] btrfs_write_out_ino_cache+0x95/0xad [btrfs]
[255289.392068] [<ffffffffa036f5c4>] btrfs_save_ino_cache+0x275/0x2dc [btrfs]
[255289.392068] [<ffffffffa03e2d83>] commit_fs_roots.isra.12+0xaa/0x137 [btrfs]
[255289.392068] [<ffffffff8107d33d>] ? trace_hardirqs_on+0xd/0xf
[255289.392068] [<ffffffffa037841f>] ? btrfs_commit_transaction+0x4b1/0x9c9 [btrfs]
[255289.392068] [<ffffffff814351a4>] ? _raw_spin_unlock+0x32/0x46
[255289.392068] [<ffffffffa037842e>] btrfs_commit_transaction+0x4c0/0x9c9 [btrfs]
(...)
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
Pull btrfs fix from Chris Mason:
"When an arm user reported crashes near page_address(page) in my new
code, it became clear that I can't be trusted with GFP masks. Filipe
beat me to the patch, and I'll just be in the corner with my dunce cap
on"
* 'for-linus-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
Btrfs: fix wrong mapping flags for free space inode
We were passing a flags value that differed from the intention in commit
2b10826800 ("Btrfs: don't use highmem for free space cache pages").
This caused problems in a ARM machine, leaving btrfs unusable there.
Reported-by: Merlijn Wajer <merlijn@wizzup.org>
Tested-by: Merlijn Wajer <merlijn@wizzup.org>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
Struct bio has a reference count that controls when it can be freed.
Most uses cases is allocating the bio, which then returns with a
single reference to it, doing IO, and then dropping that single
reference. We can remove this atomic_dec_and_test() in the completion
path, if nobody else is holding a reference to the bio.
If someone does call bio_get() on the bio, then we flag the bio as
now having valid count and that we must properly honor the reference
count when it's being put.
Tested-by: Robert Elliott <elliott@hp.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Pull btrfs fixes from Chris Mason:
"A few more btrfs fixes.
These range from corners Filipe found in the new free space cache
writeback to a grab bag of fixes from the list"
* 'for-linus-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
Btrfs: btrfs_release_extent_buffer_page didn't free pages of dummy extent
Btrfs: fill ->last_trans for delayed inode in btrfs_fill_inode.
btrfs: unlock i_mutex after attempting to delete subvolume during send
btrfs: check io_ctl_prepare_pages return in __btrfs_write_out_cache
btrfs: fix race on ENOMEM in alloc_extent_buffer
btrfs: handle ENOMEM in btrfs_alloc_tree_block
Btrfs: fix find_free_dev_extent() malfunction in case device tree has hole
Btrfs: don't check for delalloc_bytes in cache_save_setup
Btrfs: fix deadlock when starting writeback of bg caches
Btrfs: fix race between start dirty bg cache writeout and bg deletion
btrfs_release_extent_buffer_page() can't handle dummy extent that
allocated by btrfs_clone_extent_buffer() properly. That is because
reference count of pages that allocated by btrfs_clone_extent_buffer()
was 2, 1 by alloc_page(), and another by attach_extent_buffer_page().
Running following command repeatly can check this memory leak problem
btrfs inspect-internal inode-resolve 256 /mnt/btrfs
Signed-off-by: Chien-Kuan Yeh <ckya@synology.com>
Signed-off-by: Forrest Liu <forrestl@synology.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Tested-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
Pull btrfs fixes from Chris Mason:
"Filipe hit two problems in my block group cache patches. We finalized
the fixes last week and ran through more tests"
* 'for-linus-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
Btrfs: prevent list corruption during free space cache processing
Btrfs: fix inode cache writeout
Pull fourth vfs update from Al Viro:
"d_inode() annotations from David Howells (sat in for-next since before
the beginning of merge window) + four assorted fixes"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
RCU pathwalk breakage when running into a symlink overmounting something
fix I_DIO_WAKEUP definition
direct-io: only inc/dec inode->i_dio_count for file systems
fs/9p: fix readdir()
VFS: assorted d_backing_inode() annotations
VFS: fs/inode.c helpers: d_inode() annotations
VFS: fs/cachefiles: d_backing_inode() annotations
VFS: fs library helpers: d_inode() annotations
VFS: assorted weird filesystems: d_inode() annotations
VFS: normal filesystems (and lustre): d_inode() annotations
VFS: security/: d_inode() annotations
VFS: security/: d_backing_inode() annotations
VFS: net/: d_inode() annotations
VFS: net/unix: d_backing_inode() annotations
VFS: kernel/: d_inode() annotations
VFS: audit: d_backing_inode() annotations
VFS: Fix up some ->d_inode accesses in the chelsio driver
VFS: Cachefiles should perform fs modifications on the top layer only
VFS: AF_UNIX sockets should call mknod on the top layer only
We need to fill inode when we found a node for it in delayed_nodes_tree.
But we did not fill the ->last_trans currently, it will cause the test
of xfstest/generic/311 fail. Scenario of the 311 is shown as below:
Problem:
(1). test_fd = open(fname, O_RDWR|O_DIRECT)
(2). pwrite(test_fd, buf, 4096, 0)
(3). close(test_fd)
(4). drop_all_caches() <-------- "echo 3 > /proc/sys/vm/drop_caches"
(5). test_fd = open(fname, O_RDWR|O_DIRECT)
(6). fsync(test_fd);
<-------- we did not get the correct log entry for the file
Reason:
When we re-open this file in (5), we would find a node
in delayed_nodes_tree and fill the inode we are lookup with the
information. But the ->last_trans is not filled, then the fsync()
will check the ->last_trans and found it's 0 then say this inode
is already in our tree which is commited, not recording the extents
for it.
Fix:
This patch fill the ->last_trans properly and set the
runtime_flags if needed in this situation. Then we can get the
log entries we expected after (6) and generic/311 passed.
Signed-off-by: Dongsheng Yang <yangds.fnst@cn.fujitsu.com>
Reviewed-by: Miao Xie <miaoxie@huawei.com>
Signed-off-by: Chris Mason <clm@fb.com>
Whenever the check for a send in progress introduced in commit
521e0546c9 (btrfs: protect snapshots from deleting during send) is
hit, we return without unlocking inode->i_mutex. This is easy to see
with lockdep enabled:
[ +0.000059] ================================================
[ +0.000028] [ BUG: lock held when returning to user space! ]
[ +0.000029] 4.0.0-rc5-00096-g3c435c1 #93 Not tainted
[ +0.000026] ------------------------------------------------
[ +0.000029] btrfs/211 is leaving the kernel with locks still held!
[ +0.000029] 1 lock held by btrfs/211:
[ +0.000023] #0: (&type->i_mutex_dir_key){+.+.+.}, at: [<ffffffff8135b8df>] btrfs_ioctl_snap_destroy+0x2df/0x7a0
Make sure we unlock it in the error path.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.cz>
Cc: stable@vger.kernel.org
Signed-off-by: Omar Sandoval <osandov@osandov.com>
Signed-off-by: Chris Mason <clm@fb.com>
If io_ctl_prepare_pages fails, the pages in io_ctl.pages are not valid.
When we try to access them later, things will blow up in various ways.
Also fix the comment about the return value, which is an errno on error,
not -1, and update the cases where it was not.
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Omar Sandoval <osandov@osandov.com>
Signed-off-by: Chris Mason <clm@fb.com>
Consider the following interleaving of overlapping calls to
alloc_extent_buffer:
Call 1:
- Successfully allocates a few pages with find_or_create_page
- find_or_create_page fails, goto free_eb
- Unlocks the allocated pages
Call 2:
- Calls find_or_create_page and gets a page in call 1's extent_buffer
- Finds that the page is already associated with an extent_buffer
- Grabs a reference to the half-written extent_buffer and calls
mark_extent_buffer_accessed on it
mark_extent_buffer_accessed will then try to call mark_page_accessed on
a null page and panic.
The fix is to decrement the reference count on the half-written
extent_buffer before unlocking the pages so call 2 won't use it. We
should also set exists = NULL in the case that we don't use exists to
avoid accidentally returning a freed extent_buffer in an error case.
Signed-off-by: Omar Sandoval <osandov@osandov.com>
Reviewed-by: David Sterba <dsterba@suse.cz>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Chris Mason <clm@fb.com>
This is one of the first places to give out when memory is tight. Handle
it properly rather than with a BUG_ON.
Also fix the comment about the return value, which is an ERR_PTR, not
NULL, on error.
Signed-off-by: Omar Sandoval <osandov@osandov.com>
Reviewed-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
If device tree has hole, find_free_dev_extent() cannot find available
address properly.
The problem can be reproduce by following script.
mntpath=/btrfs
loopdev=/dev/loop0
filepath=/home/forrest/image
umount $mntpath
losetup -d $loopdev
truncate --size 100g $filepath
losetup $loopdev $filepath
mkfs.btrfs -f $loopdev
mount $loopdev $mntpath
# make device tree with one big hole
for i in `seq 1 1 100`; do
fallocate -l 1g $mntpath/$i
done
sync
for i in `seq 1 1 95`; do
rm $mntpath/$i
done
sync
# wait cleaner thread remove unused block group
sleep 300
fallocate -l 1g $mntpath/aaa
# failed to allocate new chunk
fallocate -l 1g $mntpath/bbb
Above script will make device tree with one big hole, and can only allocate
just one chunk in a transaction, so failed to allocate new chunk for $mntpath/bbb
item 8 key (1 DEV_EXTENT 2185232384) itemoff 15859 itemsize 48
dev extent chunk_tree 3
chunk objectid 256 chunk offset 106292051968 length 1073741824
item 9 key (1 DEV_EXTENT 104190705664) itemoff 15811 itemsize 48
dev extent chunk_tree 3
chunk objectid 256 chunk offset 103108575232 length 1073741824
Signed-off-by: Forrest Liu <forrestl@synology.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Chris Mason <clm@fb.com>
Now that we're doing free space cache writeback outside the critical
section in the commit, there is a bigger window for delalloc_bytes to
be added after a cache has been written. find_free_extent may do this
without putting the block group back into the dirty list, and also
without a transaction running.
Checking for delalloc_bytes in cache_save_setup means we might leave the
cache marked as written without invalidating it. Consistency checks
during mount will toss the cache, but it's better to get rid of the
check in cache_save_setup and let it get invalidated by the checks
already done during cache write out.
Signed-off-by: Chris Mason <clm@fb.com>
While running xfstests I ran into the following:
[20892.242791] ------------[ cut here ]------------
[20892.243776] WARNING: CPU: 0 PID: 13299 at fs/btrfs/super.c:260 __btrfs_abort_transaction+0x52/0x114 [btrfs]()
[20892.245874] BTRFS: Transaction aborted (error -2)
[20892.247329] Modules linked in: btrfs dm_snapshot dm_bufio dm_flakey dm_mod crc32c_generic xor raid6_pq nfsd auth_rpcgss oid_registry nfs_acl nfs lockd grace fscache sunrpc loop fuse$
[20892.258488] CPU: 0 PID: 13299 Comm: fsstress Tainted: G W 4.0.0-rc5-btrfs-next-9+ #2
[20892.262011] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.7.5-0-ge51488c-20140602_164612-nilsson.home.kraxel.org 04/01/2014
[20892.264738] 0000000000000009 ffff880427f8bc18 ffffffff8142fa46 ffffffff8108b6a2
[20892.266244] ffff880427f8bc68 ffff880427f8bc58 ffffffff81045ea5 ffff880427f8bc48
[20892.267761] ffffffffa0509a6d 00000000fffffffe ffff8803545d6f40 ffffffffa05a15a0
[20892.269378] Call Trace:
[20892.269915] [<ffffffff8142fa46>] dump_stack+0x4f/0x7b
[20892.271097] [<ffffffff8108b6a2>] ? console_unlock+0x361/0x3ad
[20892.272173] [<ffffffff81045ea5>] warn_slowpath_common+0xa1/0xbb
[20892.273386] [<ffffffffa0509a6d>] ? __btrfs_abort_transaction+0x52/0x114 [btrfs]
[20892.274857] [<ffffffff81045f05>] warn_slowpath_fmt+0x46/0x48
[20892.275851] [<ffffffffa0509a6d>] __btrfs_abort_transaction+0x52/0x114 [btrfs]
[20892.277341] [<ffffffffa0515e10>] write_one_cache_group+0x68/0xaf [btrfs]
[20892.278628] [<ffffffffa052088a>] btrfs_start_dirty_block_groups+0x18d/0x29b [btrfs]
[20892.280191] [<ffffffffa052f077>] btrfs_commit_transaction+0x130/0x9c9 [btrfs]
[20892.281781] [<ffffffff8107d33d>] ? trace_hardirqs_on+0xd/0xf
[20892.282873] [<ffffffffa054163b>] btrfs_sync_file+0x313/0x387 [btrfs]
[20892.284111] [<ffffffff8117acad>] vfs_fsync_range+0x95/0xa4
[20892.285203] [<ffffffff810e603f>] ? time_hardirqs_on+0x15/0x28
[20892.286290] [<ffffffff8123960b>] ? trace_hardirqs_on_thunk+0x3a/0x3f
[20892.287469] [<ffffffff8117acd8>] vfs_fsync+0x1c/0x1e
[20892.288412] [<ffffffff8117ae54>] do_fsync+0x34/0x4e
[20892.289348] [<ffffffff8117b07c>] SyS_fsync+0x10/0x14
[20892.290255] [<ffffffff81435b32>] system_call_fastpath+0x12/0x17
[20892.291316] ---[ end trace 597f77e664245373 ]---
[20892.293955] BTRFS: error (device sdg) in write_one_cache_group:3184: errno=-2 No such entry
[20892.297390] BTRFS info (device sdg): forced readonly
This happens because in btrfs_start_dirty_block_groups() we splice the
transaction's list of dirty block groups into a local list and then we
keep extracting the first element of the list without holding the
cache_write_mutex mutex. This means that before we acquire that mutex
the first block group on the list might be removed by a conurrent task
running btrfs_remove_block_group(). So make sure we extract the first
element (and test the list emptyness) while holding that mutex.
Fixes: 1bbc621ef2 ("Btrfs: allow block group cache writeout
outside critical section in commit")
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
do_blockdev_direct_IO() increments and decrements the inode
->i_dio_count for each IO operation. It does this to protect against
truncate of a file. Block devices don't need this sort of protection.
For a capable multiqueue setup, this atomic int is the only shared
state between applications accessing the device for O_DIRECT, and it
presents a scaling wall for that. In my testing, as much as 30% of
system time is spent incrementing and decrementing this value. A mixed
read/write workload improved from ~2.5M IOPS to ~9.6M IOPS, with
better latencies too. Before:
clat percentiles (usec):
| 1.00th=[ 33], 5.00th=[ 34], 10.00th=[ 34], 20.00th=[ 34],
| 30.00th=[ 34], 40.00th=[ 34], 50.00th=[ 35], 60.00th=[ 35],
| 70.00th=[ 35], 80.00th=[ 35], 90.00th=[ 37], 95.00th=[ 80],
| 99.00th=[ 98], 99.50th=[ 151], 99.90th=[ 155], 99.95th=[ 155],
| 99.99th=[ 165]
After:
clat percentiles (usec):
| 1.00th=[ 95], 5.00th=[ 108], 10.00th=[ 129], 20.00th=[ 149],
| 30.00th=[ 155], 40.00th=[ 161], 50.00th=[ 167], 60.00th=[ 171],
| 70.00th=[ 177], 80.00th=[ 185], 90.00th=[ 201], 95.00th=[ 270],
| 99.00th=[ 390], 99.50th=[ 398], 99.90th=[ 418], 99.95th=[ 422],
| 99.99th=[ 438]
In other setups, Robert Elliott reported seeing good performance
improvements:
https://lkml.org/lkml/2015/4/3/557
The more applications accessing the device, the worse it gets.
Add a new direct-io flags, DIO_SKIP_DIO_COUNT, which tells
do_blockdev_direct_IO() that it need not worry about incrementing
or decrementing the inode i_dio_count for this caller.
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Elliott, Robert (Server Storage) <elliott@hp.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jens Axboe <axboe@fb.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
__btrfs_write_out_cache is holding the ctl->tree_lock while it prepares
a list of bitmaps to record in the free space cache. It was dropping
the lock while it worked on other components, which made a window for
free_bitmap() to free the bitmap struct without removing it from the
list.
This changes things to hold the lock the whole time, and also makes sure
we hold the lock during enospc cleanup.
Reported-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
Pull btrfs updates from Chris Mason:
"I've been running these through a longer set of load tests because my
commits change the free space cache writeout. It fixes commit stalls
on large filesystems (~20T space used and up) that we have been
triggering here. We were seeing new writers blocked for 10 seconds or
more during commits, which is far from good.
Josef and I fixed up ENOSPC aborts when deleting huge files (3T or
more), that are triggered because our metadata reservations were not
properly accounting for crcs and were not replenishing during the
truncate.
Also in this series, a number of qgroup fixes from Fujitsu and Dave
Sterba collected most of the pending cleanups from the list"
* 'for-linus-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: (93 commits)
btrfs: quota: Update quota tree after qgroup relationship change.
btrfs: quota: Automatically update related qgroups or mark INCONSISTENT flags when assigning/deleting a qgroup relations.
btrfs: qgroup: clear STATUS_FLAG_ON in disabling quota.
btrfs: Update btrfs qgroup status item when rescan is done.
btrfs: qgroup: Fix dead judgement on qgroup_rescan_leaf() return value.
btrfs: Don't allow subvolid >= (1 << BTRFS_QGROUP_LEVEL_SHIFT) to be created
btrfs: Check qgroup level in kernel qgroup assign.
btrfs: qgroup: allow to remove qgroup which has parent but no child.
btrfs: qgroup: return EINVAL if level of parent is not higher than child's.
btrfs: qgroup: do a reservation in a higher level.
Btrfs: qgroup, Account data space in more proper timings.
Btrfs: qgroup: Introduce a may_use to account space_info->bytes_may_use.
Btrfs: qgroup: free reserved in exceeding quota.
Btrfs: qgroup: cleanup, remove an unsued parameter in btrfs_create_qgroup().
btrfs: qgroup: fix limit args override whole limit struct
btrfs: qgroup: update limit info in function btrfs_run_qgroups().
btrfs: qgroup: consolidate the parameter of fucntion update_qgroup_limit_item().
btrfs: qgroup: update qgroup in memory at the same time when we update it in btree.
btrfs: qgroup: inherit limit info from srcgroup in creating snapshot.
btrfs: Support busy loop of write and delete
...
The code to fix stalls during free spache cache IO wasn't using
the correct root when waiting on the IO for inode caches. This
is only a problem when the inode cache is enabled with
mount -o inode_cache
This fixes the inode cache writeout to preserve any error values and
makes sure not to override the root when inode cache writeout is done.
Reported-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
that's the bulk of filesystem drivers dealing with inodes of their own
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Previous patch modified the in memory struct but it's not written in
quota tree until next commit.
So user will still get old data using "btrfs qgroup show" after
assign/remove.
This patch will call btrfs_run_qgroups in assign ioctl so it will be
updated to in memory quota trees and user will get up-to-date results.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
Operation like qgroups assigning/deleting qgroup relations will mostly
cause qgroup data inconsistent, since it needs to do the full rescan to
determine whether shared extents are exclusive or still shared in
parent qgroups.
But there are some exceptions, like qgroup with only exclusive extents
(qgroup->excl == qgroup->rfer), in that case, we only needs to
modify all its parents' excl and rfer.
So this patch adds a quick path for such qgroup in qgroup
assign/remove routine, and if quick path failed, the qgroup status will
be marked INCONSISTENT, and return 1 to info user-land.
BTW since the quick path is much the same of qgroup_excl_accounting(),
so move the core of it to __qgroup_excl_accounting() and reuse it.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: Dongsheng Yang <yangds.fnst@cn.fujitsu.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
we forgot to clear STATUS_FLAG_ON in quota_disable(), it
will cause a problem shown as below:
# mount /dev/sdc /mnt
# btrfs quota enable /mnt
# btrfs quota disable /mnt
# btrfs quota rescan /mnt
quota rescan started <--- expecting it fail here.
# echo $?
0
Signed-off-by: Dongsheng Yang <yangds.fnst@cn.fujitsu.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
Update qgroup status when rescan is done.
Before this patch, status item is not updated on rescan finish, which
causing the RESCAN and INCONSISTENT flags never cleared.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
Old qgroup_rescan_leaf() comment indicates ret == 2 as complete and
cleared INCONSISTENT flag.
This is not true since it will never return 2, and inside it no codes
will clear INCONSISTENT flag.
The flag clearance is done in btrfs_qgroup_rescan_work().
This caused the bug that INCONSISTENT flag is never cleared.
So change the comment and fix the dead judgment.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
Btrfs will create qgroup on subvolume creation if quota is enabled, but
qgroup uses the high bits(currently 16 bits) as level, to build the
inheritance.
However it is fully possible a subvolume can be created with a
subvolumeid larger than 1 << BTRFS_QGROUP_LEVEL_SHIFT, so it will be
considered as level 1 and can't be assigned to other qgroup in level 1.
This patch will prevent such things so qgroup inheritance will not be
screwed up.
The downside is very clear, btrfs subvolume number limit will decrease
from (u64 max - 256(fisrt free objectid) - 256(last free objectid)) to
(u48 max -256(first free objectid)).
But we still have near u48(that's 15 digits in dec), so that should not
be a huge problem.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
Although we have qgroup level check in btrfs-progs, it's not enough
since other programe may still call ioctl directly not using
btrfs-progs. For example, systemd.
But it's btrfs-progs to be blame since we don't provide a
full-function(like subvolume create things) btrfs library with enough
check, and only rely on kernel ioctl.
So Add level checks in kernel too.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
When a qgroup has parents but no child, it should be removable in
Theory I think. But currently, we can not remove it when it has
either parent or child.
Example:
# btrfs quota enable /mnt
# btrfs qgroup create 1/0 /mnt
# btrfs qgroup create 2/0 /mnt
# btrfs qgroup assign 1/0 2/0 /mnt
# btrfs qgroup show -pcre /mnt
qgroupid rfer excl max_rfer max_excl parent child
-------- ---- ---- -------- -------- ------ -----
0/5 16384 16384 0 0 --- ---
1/0 0 0 0 0 2/0 ---
2/0 0 0 0 0 --- 1/0
At this time, there is no subvol or qgroup depending on it.
Just a qgroup 2/0 is its parent, but 2/0 can work well without
1/0. So I think 1/0 should be removalbe. But:
# btrfs qgroup destroy 1/0 /mnt
ERROR: unable to destroy quota group: Device or resource busy
This patch remove the check of qgroup->parent in removing it,
then we can remove a qgroup when it has a parent.
Signed-off-by: Dongsheng Yang <yangds.fnst@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
When we create a subvol inheriting a qgroup, we need to check the level
of them. Otherwise, there is a chance a qgroup can inherit another qgroup
at the same level.
Signed-off-by: Dongsheng Yang <yangds.fnst@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
There are two problems in qgroup:
a). The PAGE_CACHE is 4K, even when we are writing a data of 1K,
qgroup will reserve a 4K size. It will cause the last 3K in a qgroup
is not available to user.
b). When user is writing a inline data, qgroup will not reserve it,
it means this is a window we can exceed the limit of a qgroup.
The main idea of this patch is reserving the data size of write_bytes
rather than the reserve_bytes. It means qgroup will not care about
the data size btrfs will reserve for user, but only care about the
data size user is going to write. Then reserve it when user want to
write and release it in transaction committed.
In this way, qgroup can be released from the complex procedure in
btrfs and only do the reserve when user want to write and account
when the data is written in commit_transaction().
Signed-off-by: Dongsheng Yang <yangds.fnst@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
Currenly, in data writing, ->reserved is accounted in
fill_delalloc(), but ->may_use is released in clear_bit_hook()
which is called by btrfs_finish_ordered_io(). That's too late,
that said, between fill_delalloc() and btrfs_finish_ordered_io(),
the data is doublely accounted by qgroup. It will cause some
unexpected -EDQUOT.
Example:
# btrfs quota enable /root/btrfs-auto-test/
# btrfs subvolume create /root/btrfs-auto-test//sub
Create subvolume '/root/btrfs-auto-test/sub'
# btrfs qgroup limit 1G /root/btrfs-auto-test//sub
dd if=/dev/zero of=/root/btrfs-auto-test//sub/file bs=1024 count=1500000
dd: error writing '/root/btrfs-auto-test//sub/file': Disk quota exceeded
681353+0 records in
681352+0 records out
697704448 bytes (698 MB) copied, 8.15563 s, 85.5 MB/s
It's (698 MB) when we got an -EDQUOT, but we limit it by 1G.
This patch move the btrfs_qgroup_reserve/free() for data from
btrfs_delalloc_reserve/release_metadata() to btrfs_check_data_free_space()
and btrfs_free_reserved_data_space(). Then the accounter in qgroup
will be updated at the same time with the accounter in space_info updated.
In this way, the unexpected -EDQUOT will be killed.
Reported-by: Satoru Takeuchi <takeuchi_satoru@jp.fujitsu.com>
Signed-off-by: Dongsheng Yang <yangds.fnst@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
Currently, for pre_alloc or delay_alloc, the bytes will be accounted
in space_info by the three guys.
space_info->bytes_may_use --- space_info->reserved --- space_info->used.
But on the other hand, in qgroup, there are only two counters to account the
bytes, qgroup->reserved and qgroup->excl. And qg->reserved accounts
bytes in space_info->bytes_may_use and qg->excl accounts bytes in
space_info->used. So the bytes in space_info->reserved is not accounted
in qgroup. If so, there is a window we can exceed the quota limit when
bytes is in space_info->reserved.
Example:
# btrfs quota enable /mnt
# btrfs qgroup limit -e 10M /mnt
# for((i=0;i<20;i++));do fallocate -l 1M /mnt/data$i; done
# sync
# btrfs qgroup show -pcre /mnt
qgroupid rfer excl max_rfer max_excl parent child
-------- ---- ---- -------- -------- ------ -----
0/5 20987904 20987904 0 10485760 --- ---
qg->excl is 20987904 larger than max_excl 10485760.
This patch introduce a new counter named may_use to qgroup, then
there are three counters in qgroup to account bytes in space_info
as below.
space_info->bytes_may_use --- space_info->reserved --- space_info->used.
qgroup->may_use --- qgroup->reserved --- qgroup->excl
With this patch applied:
# btrfs quota enable /mnt
# btrfs qgroup limit -e 10M /mnt
# for((i=0;i<20;i++));do fallocate -l 1M /mnt/data$i; done
fallocate: /mnt/data9: fallocate failed: Disk quota exceeded
fallocate: /mnt/data10: fallocate failed: Disk quota exceeded
fallocate: /mnt/data11: fallocate failed: Disk quota exceeded
fallocate: /mnt/data12: fallocate failed: Disk quota exceeded
fallocate: /mnt/data13: fallocate failed: Disk quota exceeded
fallocate: /mnt/data14: fallocate failed: Disk quota exceeded
fallocate: /mnt/data15: fallocate failed: Disk quota exceeded
fallocate: /mnt/data16: fallocate failed: Disk quota exceeded
fallocate: /mnt/data17: fallocate failed: Disk quota exceeded
fallocate: /mnt/data18: fallocate failed: Disk quota exceeded
fallocate: /mnt/data19: fallocate failed: Disk quota exceeded
# sync
# btrfs qgroup show -pcre /mnt
qgroupid rfer excl max_rfer max_excl parent child
-------- ---- ---- -------- -------- ------ -----
0/5 9453568 9453568 0 10485760 --- ---
Reported-by: Cyril SCETBON <cyril.scetbon@free.fr>
Signed-off-by: Dongsheng Yang <yangds.fnst@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
When we exceed quota limit in writing, we will free
some reserved extent when we need to drop but not free
account in qgroup. It means, each time we exceed quota
in writing, there will be some remain space in qg->reserved
we can not use any more. If things go on like this, the
all space will be ate up.
Signed-off-by: Dongsheng Yang <yangds.fnst@cn.fujitsu.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
btrfs_limit_group use arg limit to override the old qgroup_limit of
corresponding qgroup. However, we should override part of old qgroup_limit
according to the bit which has been set in arg limit.
Signed-off-by: Fan Chengniang <fancn.fnst@cn.fujitsu.com>
Signed-off-by: Dongsheng Yang <yangds.fnst@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
When we commit_transaction(), qgroups in btree should be updated.
But, limit info is not considered currently. It will cause a problem
when a qgroup of a snapshot inherit the limit info from srcqgroup,
then there is an inconsistency.
Signed-off-by: Dongsheng Yang <yangds.fnst@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
Cleanup: Change the parameter of update_qgroup_limit_item() to the family of
update_qgroup_xxx_item().
Signed-off-by: Dongsheng Yang <yangds.fnst@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
When we call btrfs_qgroup_inherit() with BTRFS_QGROUP_INHERIT_SET_LIMITS,
btrfs will update the limit info of qgroup in btree but forget to update
the qgroup in rbtree at the same time. It obviousely will cause an inconsistency.
This patch fix it by updating the rbtree at the same time.
Signed-off-by: Dongsheng Yang <yangds.fnst@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
Currently, when we snapshot a subvol, snapshot will not copy the limits
from srcqgroup.
This patch make the qgroup in snapshot inherit the limit info when create
a snapshot.
Signed-off-by: Dongsheng Yang <yangds.fnst@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
Reproduce:
while true; do
dd if=/dev/zero of=/mnt/btrfs/file count=[75% fs_size]
rm /mnt/btrfs/file
done
Then we can see above loop failed on NO_SPACE.
It it long-term problem since very beginning, because delayed-iput
after rm are not run.
We already have commit_transaction() in alloc_space code, but it is
not triggered in above case.
This patch trigger commit_transaction() to run delayed-iput and
reflash pinned-space to to make write success.
It is based on previous fix of delayed-iput in commit_transaction(),
need to be applied on top of:
btrfs: Fix NO_SPACE bug caused by delayed-iput
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
Steps to reproduce:
while true; do
dd if=/dev/zero of=/btrfs_dir/file count=[fs_size * 75%]
rm /btrfs_dir/file
sync
done
And we'll see dd failed because btrfs return NO_SPACE.
Reason:
Normally, btrfs_commit_transaction() call btrfs_run_delayed_iputs()
in end to free fs space for next write, but sometimes it hadn't
done work on time, because btrfs-cleaner thread get delayed-iputs
from list before, but do iput() after next write.
This is log:
[ 2569.050776] comm=btrfs-cleaner func=btrfs_evict_inode() begin
[ 2569.084280] comm=sync func=btrfs_commit_transaction() call btrfs_run_delayed_iputs()
[ 2569.085418] comm=sync func=btrfs_commit_transaction() done btrfs_run_delayed_iputs()
[ 2569.087554] comm=sync func=btrfs_commit_transaction() end
[ 2569.191081] comm=dd begin
[ 2569.790112] comm=dd func=__btrfs_buffered_write() ret=-28
[ 2569.847479] comm=btrfs-cleaner func=add_pinned_bytes() 0 + 32677888 = 32677888
[ 2569.849530] comm=btrfs-cleaner func=add_pinned_bytes() 32677888 + 23834624 = 56512512
...
[ 2569.903893] comm=btrfs-cleaner func=add_pinned_bytes() 943976448 + 21762048 = 965738496
[ 2569.908270] comm=btrfs-cleaner func=btrfs_evict_inode() end
Fix:
Make btrfs_commit_transaction() wait current running btrfs-cleaner's
delayed-iputs() done in end.
Test:
Use script similar to above(more complex),
before patch:
7 failed in 100 * 20 loop.
after patch:
0 failed in 100 * 20 loop.
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
space_info's value calculation is some complex and easy to cause
bug, add WARN_ON() to help debug.
Changelog v1->v2:
Put WARN_ON()s under the ENOSPC_DEBUG mount option.
Suggested by: David Sterba <dsterba@suse.cz>
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
Bug1:
space_info->bytes_readonly was set to very large(negative) value in
btrfs_remove_block_group().
Reason:
Current code set block_group_cache->pinned = 0 in btrfs_delete_unused_bgs(),
but above space was not counted to space_info->bytes_readonly.
Then in btrfs_remove_block_group():
block_group->space_info->bytes_readonly -= block_group->key.offset;
We can see following value in trace:
btrfs_remove_block_group: pid=2677 comm=btrfs-cleaner WARNING: bytes_readonly=12582912, key.offset=134217728
Bug2:
space_info->total_bytes_pinned grow to value larger than fs size.
In a 1.2G fs, we can get following trace log:
at first:
ZL_DEBUG: add_pinned_bytes: pid=2710 comm=sync change total_bytes_pinned flags=1 869793792 + 95944704 = 965738496
after some op:
ZL_DEBUG: add_pinned_bytes: pid=2770 comm=sync change total_bytes_pinned flags=1 1780178944 + 95944704 = 1876123648
after some op:
ZL_DEBUG: add_pinned_bytes: pid=3193 comm=sync change total_bytes_pinned flags=1 2924568576 + 95551488 = 3020120064
...
Reason:
Similar to bug1, we also need to adjust space_info->total_bytes_pinned
in above code block.
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
If we have any chance to make a successful write, we should not give up.
This patch adjust commit-transaction condition from:
pinned >= wanted
to
left + pinned >= wanted
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
It is another reason for NO_SPACE case.
When we found enough free space in loop and saved them to
max_hole_start/size before, and tail space contains pending extent,
origional innocent max_hole_start/size are reset in retry.
As a result, find_free_dev_extent() returns less space than it can,
and cause NO_SPACE in user program.
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
Old code bypass commit transaction when we don't have enough
pinned space, but another case is there exist freed bgs in current
transction, it have possibility to make alloc_chunk success.
This patch modify the condition to:
if (have_free_bg || have_pinned_space) commit_transaction()
Confirmed above action by printk before and after patch.
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
Commit 0d97a64e0 creates a new variable but doesn't always set it up.
This puts it back to the original method (key.offset + 1) for the cases
not covered by Filipe's new logic.
Signed-off-by: Chris Mason <clm@fb.com>
If we attempt to clone a 0 length region into a file we can end up
inserting a range in the inode's extent_io tree with a start offset
that is greater then the end offset, which triggers immediately the
following warning:
[ 3914.619057] WARNING: CPU: 17 PID: 4199 at fs/btrfs/extent_io.c:435 insert_state+0x4b/0x10b [btrfs]()
[ 3914.620886] BTRFS: end < start 4095 4096
(...)
[ 3914.638093] Call Trace:
[ 3914.638636] [<ffffffff81425fd9>] dump_stack+0x4c/0x65
[ 3914.639620] [<ffffffff81045390>] warn_slowpath_common+0xa1/0xbb
[ 3914.640789] [<ffffffffa03ca44f>] ? insert_state+0x4b/0x10b [btrfs]
[ 3914.642041] [<ffffffff810453f0>] warn_slowpath_fmt+0x46/0x48
[ 3914.643236] [<ffffffffa03ca44f>] insert_state+0x4b/0x10b [btrfs]
[ 3914.644441] [<ffffffffa03ca729>] __set_extent_bit+0x107/0x3f4 [btrfs]
[ 3914.645711] [<ffffffffa03cb256>] lock_extent_bits+0x65/0x1bf [btrfs]
[ 3914.646914] [<ffffffff8142b2fb>] ? _raw_spin_unlock+0x28/0x33
[ 3914.648058] [<ffffffffa03cbac4>] ? test_range_bit+0xcc/0xde [btrfs]
[ 3914.650105] [<ffffffffa03cb3c3>] lock_extent+0x13/0x15 [btrfs]
[ 3914.651361] [<ffffffffa03db39e>] lock_extent_range+0x3d/0xcd [btrfs]
[ 3914.652761] [<ffffffffa03de1fe>] btrfs_ioctl_clone+0x278/0x388 [btrfs]
[ 3914.654128] [<ffffffff811226dd>] ? might_fault+0x58/0xb5
[ 3914.655320] [<ffffffffa03e0909>] btrfs_ioctl+0xb51/0x2195 [btrfs]
(...)
[ 3914.669271] ---[ end trace 14843d3e2e622fc1 ]---
This later makes the inode eviction handler enter an infinite loop that
keeps dumping the following warning over and over:
[ 3915.117629] WARNING: CPU: 22 PID: 4228 at fs/btrfs/extent_io.c:435 insert_state+0x4b/0x10b [btrfs]()
[ 3915.119913] BTRFS: end < start 4095 4096
(...)
[ 3915.137394] Call Trace:
[ 3915.137913] [<ffffffff81425fd9>] dump_stack+0x4c/0x65
[ 3915.139154] [<ffffffff81045390>] warn_slowpath_common+0xa1/0xbb
[ 3915.140316] [<ffffffffa03ca44f>] ? insert_state+0x4b/0x10b [btrfs]
[ 3915.141505] [<ffffffff810453f0>] warn_slowpath_fmt+0x46/0x48
[ 3915.142709] [<ffffffffa03ca44f>] insert_state+0x4b/0x10b [btrfs]
[ 3915.143849] [<ffffffffa03ca729>] __set_extent_bit+0x107/0x3f4 [btrfs]
[ 3915.145120] [<ffffffffa038c1e3>] ? btrfs_kill_super+0x17/0x23 [btrfs]
[ 3915.146352] [<ffffffff811548f6>] ? deactivate_locked_super+0x3b/0x50
[ 3915.147565] [<ffffffffa03cb256>] lock_extent_bits+0x65/0x1bf [btrfs]
[ 3915.148785] [<ffffffff8142b7e2>] ? _raw_write_unlock+0x28/0x33
[ 3915.149931] [<ffffffffa03bc325>] btrfs_evict_inode+0x196/0x482 [btrfs]
[ 3915.151154] [<ffffffff81168904>] evict+0xa0/0x148
[ 3915.152094] [<ffffffff811689e5>] dispose_list+0x39/0x43
[ 3915.153081] [<ffffffff81169564>] evict_inodes+0xdc/0xeb
[ 3915.154062] [<ffffffff81154418>] generic_shutdown_super+0x49/0xef
[ 3915.155193] [<ffffffff811546d1>] kill_anon_super+0x13/0x1e
[ 3915.156274] [<ffffffffa038c1e3>] btrfs_kill_super+0x17/0x23 [btrfs]
(...)
[ 3915.167404] ---[ end trace 14843d3e2e622fc2 ]---
So just bail out of the clone ioctl if the length of the region to clone
is zero, without locking any extent range, in order to prevent this issue
(same behaviour as a pwrite with a 0 length for example).
This is trivial to reproduce. For example, the steps for the test I just
made for fstests:
mkfs.btrfs -f SCRATCH_DEV
mount SCRATCH_DEV $SCRATCH_MNT
touch $SCRATCH_MNT/foo
touch $SCRATCH_MNT/bar
$CLONER_PROG -s 0 -d 4096 -l 0 $SCRATCH_MNT/foo $SCRATCH_MNT/bar
umount $SCRATCH_MNT
A test case for fstests follows soon.
CC: <stable@vger.kernel.org>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Omar Sandoval <osandov@osandov.com>
Signed-off-by: Chris Mason <clm@fb.com>
If we pass a length of 0 to the extent_same ioctl, we end up locking an
extent range with a start offset greater then its end offset (if the
destination file's offset is greater than zero). This results in a warning
from extent_io.c:insert_state through the following call chain:
btrfs_extent_same()
btrfs_double_lock()
lock_extent_range()
lock_extent(inode->io_tree, offset, offset + len - 1)
lock_extent_bits()
__set_extent_bit()
insert_state()
--> WARN_ON(end < start)
This leads to an infinite loop when evicting the inode. This is the same
problem that my previous patch titled
"Btrfs: fix inode eviction infinite loop after cloning into it" addressed
but for the extent_same ioctl instead of the clone ioctl.
CC: <stable@vger.kernel.org>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Omar Sandoval <osandov@osandov.com>
Signed-off-by: Chris Mason <clm@fb.com>
While searching for extents to clone we might find one where we only use
a part of it coming from its tail. If our destination inode is the same
the source inode, we end up removing the tail part of the extent item and
insert after a new one that point to the same extent with an adjusted
key file offset and data offset. After this we search for the next extent
item in the fs/subvol tree with a key that has an offset incremented by
one. But this second search leaves us at the new extent item we inserted
previously, and since that extent item has a non-zero data offset, it
it can make us call btrfs_drop_extents with an empty range (start == end)
which causes the following warning:
[23978.537119] WARNING: CPU: 6 PID: 16251 at fs/btrfs/file.c:550 btrfs_drop_extent_cache+0x43/0x385 [btrfs]()
(...)
[23978.557266] Call Trace:
[23978.557978] [<ffffffff81425fd9>] dump_stack+0x4c/0x65
[23978.559191] [<ffffffff81045390>] warn_slowpath_common+0xa1/0xbb
[23978.560699] [<ffffffffa047f0ea>] ? btrfs_drop_extent_cache+0x43/0x385 [btrfs]
[23978.562389] [<ffffffff8104544d>] warn_slowpath_null+0x1a/0x1c
[23978.563613] [<ffffffffa047f0ea>] btrfs_drop_extent_cache+0x43/0x385 [btrfs]
[23978.565103] [<ffffffff810e3a18>] ? time_hardirqs_off+0x15/0x28
[23978.566294] [<ffffffff81079ff8>] ? trace_hardirqs_off+0xd/0xf
[23978.567438] [<ffffffffa047f73d>] __btrfs_drop_extents+0x6b/0x9e1 [btrfs]
[23978.568702] [<ffffffff8107c03f>] ? trace_hardirqs_on+0xd/0xf
[23978.569763] [<ffffffff811441c0>] ? ____cache_alloc+0x69/0x2eb
[23978.570817] [<ffffffff81142269>] ? virt_to_head_page+0x9/0x36
[23978.571872] [<ffffffff81143c15>] ? cache_alloc_debugcheck_after.isra.42+0x16c/0x1cb
[23978.573466] [<ffffffff811420d5>] ? kmemleak_alloc_recursive.constprop.52+0x16/0x18
[23978.574962] [<ffffffffa0480d07>] btrfs_drop_extents+0x66/0x7f [btrfs]
[23978.576179] [<ffffffffa049aa35>] btrfs_clone+0x516/0xaf5 [btrfs]
[23978.577311] [<ffffffffa04983dc>] ? lock_extent_range+0x7b/0xcd [btrfs]
[23978.578520] [<ffffffffa049b2a2>] btrfs_ioctl_clone+0x28e/0x39f [btrfs]
[23978.580282] [<ffffffffa049d9ae>] btrfs_ioctl+0xb51/0x219a [btrfs]
(...)
[23978.591887] ---[ end trace 988ec2a653d03ed3 ]---
Then we attempt to insert a new extent item with a key that already
exists, which makes btrfs_insert_empty_item return -EEXIST resulting in
abortion of the current transaction:
[23978.594355] WARNING: CPU: 6 PID: 16251 at fs/btrfs/super.c:260 __btrfs_abort_transaction+0x52/0x114 [btrfs]()
(...)
[23978.622589] Call Trace:
[23978.623181] [<ffffffff81425fd9>] dump_stack+0x4c/0x65
[23978.624359] [<ffffffff81045390>] warn_slowpath_common+0xa1/0xbb
[23978.625573] [<ffffffffa044ab6c>] ? __btrfs_abort_transaction+0x52/0x114 [btrfs]
[23978.626971] [<ffffffff810453f0>] warn_slowpath_fmt+0x46/0x48
[23978.628003] [<ffffffff8108a6c8>] ? vprintk_default+0x1d/0x1f
[23978.629138] [<ffffffffa044ab6c>] __btrfs_abort_transaction+0x52/0x114 [btrfs]
[23978.630528] [<ffffffffa049ad1b>] btrfs_clone+0x7fc/0xaf5 [btrfs]
[23978.631635] [<ffffffffa04983dc>] ? lock_extent_range+0x7b/0xcd [btrfs]
[23978.632886] [<ffffffffa049b2a2>] btrfs_ioctl_clone+0x28e/0x39f [btrfs]
[23978.634119] [<ffffffffa049d9ae>] btrfs_ioctl+0xb51/0x219a [btrfs]
(...)
[23978.647714] ---[ end trace 988ec2a653d03ed4 ]---
This is wrong because we should not process the extent item that we just
inserted previously, and instead process the extent item that follows it
in the tree
For example for the test case I wrote for fstests:
bs=$((64 * 1024))
mkfs.btrfs -f -l $bs -O ^no-holes /dev/sdc
mount /dev/sdc /mnt
xfs_io -f -c "pwrite -S 0xaa $(($bs * 2)) $(($bs * 2))" /mnt/foo
$CLONER_PROG -s $((3 * $bs)) -d $((267 * $bs)) -l 0 /mnt/foo /mnt/foo
$CLONER_PROG -s $((217 * $bs)) -d $((95 * $bs)) -l 0 /mnt/foo /mnt/foo
The second clone call fails with -EEXIST, because when we process the
first extent item (offset 262144), we drop part of it (counting from the
end) and then insert a new extent item with a key greater then the key we
found. The next time we search the tree we search for a key with offset
262144 + 1, which leaves us at the new extent item we have just inserted
but we think it refers to an extent that we need to clone.
Fix this by ensuring the next search key uses an offset corresponding to
the offset of the key we found previously plus the data length of the
corresponding extent item. This ensures we skip new extent items that we
inserted and works for the case of implicit holes too (NO_HOLES feature).
A test case for fstests follows soon.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
... returning -E... upon error and amount of data left in iter after
(possible) truncation upon success. Note, that normal case gives
a non-zero (positive) return value, so any tests for != 0 _must_ be
updated.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Conflicts:
fs/ext4/file.c
The rw parameter to direct_IO is redundant with iov_iter->type, and
treated slightly differently just about everywhere it's used: some users
do rw & WRITE, and others do rw == WRITE where they should be doing a
bitwise check. Simplify this with the new iov_iter_rw() helper, which
always returns either READ or WRITE.
Signed-off-by: Omar Sandoval <osandov@osandov.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Most filesystems call through to these at some point, so we'll start
here.
Signed-off-by: Omar Sandoval <osandov@osandov.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
All places outside of core VFS that checked ->read and ->write for being NULL or
called the methods directly are gone now, so NULL {read,write} with non-NULL
{read,write}_iter will do the right thing in all cases.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Near the end of close_ctree, we're calling btrfs_free_block_rsv
to free up the orphan rsv. The problem is this call updates the
space_info, which has already been freed.
This adds a new __ function that directly calls kfree instead of trying
to update the space infos.
Signed-off-by: Chris Mason <clm@fb.com>
We loop through all of the dirty block groups during commit and write
the free space cache. In order to make sure the cache is currect, we do
this while no other writers are allowed in the commit.
If a large number of block groups are dirty, this can introduce long
stalls during the final stages of the commit, which can block new procs
trying to change the filesystem.
This commit changes the block group cache writeout to take appropriate
locks and allow it to run earlier in the commit. We'll still have to
redo some of the block groups, but it means we can get most of the work
out of the way without blocking the entire FS.
Signed-off-by: Chris Mason <clm@fb.com>
In order to create the free space cache concurrently with FS modifications,
we need to take a few block group locks.
The cache code also does kmap, which would schedule with the locks held.
Instead of going through kmap_atomic, lets just use lowmem for the cache
pages.
Signed-off-by: Chris Mason <clm@fb.com>
Block group cache writeout is currently waiting on the pages for each
block group cache before moving on to writing the next one. This commit
switches things around to send down all the caches and then wait on them
in batches.
The end result is much faster, since we're keeping the disk pipeline
full.
Signed-off-by: Chris Mason <clm@fb.com>
We'll need to put the io_ctl into the block_group cache struct, so
name it struct btrfs_io_ctl and move it into ctree.h
Signed-off-by: Chris Mason <clm@fb.com>
btrfs_evict_inode() needs to be more careful about stealing from the
global_rsv. We dont' want to end up aborting commit with ENOSPC just
because the evict_inode code was too greedy.
Signed-off-by: Chris Mason <clm@fb.com>
We're triggering a huge number of commits from
btrfs_async_reclaim_metadata_space. These aren't really requried,
because everyone calling the async reclaim code is going to end up
triggering a commit on their own.
Signed-off-by: Chris Mason <clm@fb.com>
When truncate starts, it allocates some space in the block reserves so
that we'll have enough to update metadata along the way.
For very large files, we can easily go through all of that space as we
loop through the extents. This changes truncate to refill the space
reservation as it progresses through the file.
Signed-off-by: Chris Mason <clm@fb.com>
As we delete large extents, we end up doing huge amounts of COW in order
to delete the corresponding crcs. This adds accounting so that we keep
track of that space and flushing of delayed refs so that we don't build
up too much delayed crc work.
This helps limit the delayed work that must be done at commit time and
tries to avoid ENOSPC aborts because the crcs eat all the global
reserves.
Signed-off-by: Chris Mason <clm@fb.com>
When we are deleting large files with large extents, we are building up
a huge set of delayed refs for processing. Truncate isn't checking
often enough to see if we need to back off and process those, or let
a commit proceed.
The end result is long stalls after the rm, and very long commit times.
During the commits, other processes back up waiting to start new
transactions and we get into trouble.
Signed-off-by: Chris Mason <clm@fb.com>
Building alpha:allmodconfig fails with
fs/btrfs/inode.c: In function 'check_direct_IO':
fs/btrfs/inode.c:8050:2: error: implicit declaration of function 'iov_iter_alignment'
due to a missing include file.
Fixes: 3737c63e1fb0 ("fs: move struct kiocb to fs.h")
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
This was used to make sure that a fresh btrfs from an older mkfs.btrfs,
but it also allows us to mount a buggy btrfs if this btrfs has the right
superblock head part but has something wrong with chunk tree part[1], and
after that we can hit BUG_ON()s set in the code to prevent something
impossible.
Since David has released "Btrfs progs v3.19-rc2", just remove the check,
if anyone who wants to make a fresh btrfs, please use the latest one.
[1]: http://www.spinics.net/lists/linux-btrfs/msg42358.html
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: Omar Sandoval <osandov@osandov.com>
Reviewed-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
Orphans in the fs tree are cleaned up via open_ctree and subvolume
orphans are cleaned via btrfs_lookup_dentry -- except when a default
subvolume is in use. The name for the default subvolume uses a manual
lookup that doesn't trigger orphan cleanup and needs to trigger it
manually as well. This doesn't apply to the remount case since the
subvolumes are cleaned up by walking the root radix tree.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Reviewed-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
The private_data member of the Btrfs control device file
(/dev/btrfs-control) is used to hold the current transaction and needs
to be initialized to NULL to signify that no transaction is in progress.
We explicitly set the control file's private_data to NULL to be
independent of whatever value the misc subsystem initializes it to.
Backstory:
----------
The misc subsystem (which is used by /dev/btrfs-control) initializes
a file's private_data to point to the misc device when a driver has
registered a custom open file operation and initializes it to NULL
when a custom open file operation has *not* been provided.
This subtle quirk is confusing, to the point where kernel code registers
*empty* file open operations to have private_data point to the misc
device structure.
And it leads to bugs, where the addition or removal of a custom open
file operation surprisingly changes the initial contents of a file's
private_data structure.
To simplify things in the misc subsystem, a patch [1] has been proposed
to *always* set private_data to point to the misc device instead of
only doing this when a custom open file operation has been registered.
But before we can fix this in the misc subsystem itself, we need to
modify the (few) drivers that rely on this very subtle behavior.
[1] https://lkml.org/lkml/2014/12/4/939
Signed-off-by: Martin Kepplinger <martink@posteo.de>
Signed-off-by: Tom Van Braeckel <tomvanbraeckel@gmail.com>
Signed-off-by: Chris Mason <clm@fb.com>
fiemap_fill_next_extent returns 0 on success, -errno on error, 1 if this was
the last extent that will fit in user array. If 1 is returned, the return
value may eventually returned to user space, which should not happen, according
to manpage of ioctl.
Signed-off-by: Chengyu Song <csong84@gatech.edu>
Reviewed-by: David Sterba <dsterba@suse.cz>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Chris Mason <clm@fb.com>
Due to insufficient check in btrfs_is_valid_xattr, this unexpectedly
works:
$ touch file
$ setfattr -n user. -v 1 file
$ getfattr -d file
user.="1"
ie. the missing attribute name after the namespace.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=94291
Reported-by: William Douglas <william.douglas@intel.com>
CC: <stable@vger.kernel.org> # 2.6.29+
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
While committing a transaction we free the log roots before we write the
new super block. Freeing the log roots implies marking the disk location
of every node/leaf (metadata extent) as pinned before the new super block
is written. This is to prevent the disk location of log metadata extents
from being reused before the new super block is written, otherwise we
would have a corrupted log tree if before the new super block is written
a crash/reboot happens and the location of any log tree metadata extent
ended up being reused and rewritten.
Even though we pinned the log tree's metadata extents, we were issuing a
discard against them if the fs was mounted with the -o discard option,
resulting in corruption of the log tree if a crash/reboot happened before
writing the new super block - the next time the fs was mounted, during
the log replay process we would find nodes/leafs of the log btree with
a content full of zeroes, causing the process to fail and require the
use of the tool btrfs-zero-log to wipeout the log tree (and all data
previously fsynced becoming lost forever).
Fix this by not doing a discard when pinning an extent. The discard will
be done later when it's safe (after the new super block is committed) at
extent-tree.c:btrfs_finish_extent_commit().
Fixes: e688b7252f (Btrfs: fix extent pinning bugs in the tree log)
CC: <stable@vger.kernel.org>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
We can get into inconsistency between inodes and directory entries
after fsyncing a directory. The issue is that while a directory gets
the new dentries persisted in the fsync log and replayed at mount time,
the link count of the inode that directory entries point to doesn't
get updated, staying with an incorrect link count (smaller then the
correct value). This later leads to stale file handle errors when
accessing (including attempt to delete) some of the links if all the
other ones are removed, which also implies impossibility to delete the
parent directories, since the dentries can not be removed.
Another issue is that (unlike ext3/4, xfs, f2fs, reiserfs, nilfs2),
when fsyncing a directory, new files aren't logged (their metadata and
dentries) nor any child directories. So this patch fixes this issue too,
since it has the same resolution as the incorrect inode link count issue
mentioned before.
This is very easy to reproduce, and the following excerpt from my test
case for xfstests shows how:
_scratch_mkfs >> $seqres.full 2>&1
_init_flakey
_mount_flakey
# Create our main test file and directory.
$XFS_IO_PROG -f -c "pwrite -S 0xaa 0 8K" $SCRATCH_MNT/foo | _filter_xfs_io
mkdir $SCRATCH_MNT/mydir
# Make sure all metadata and data are durably persisted.
sync
# Add a hard link to 'foo' inside our test directory and fsync only the
# directory. The btrfs fsync implementation had a bug that caused the new
# directory entry to be visible after the fsync log replay but, the inode
# of our file remained with a link count of 1.
ln $SCRATCH_MNT/foo $SCRATCH_MNT/mydir/foo_2
# Add a few more links and new files.
# This is just to verify nothing breaks or gives incorrect results after the
# fsync log is replayed.
ln $SCRATCH_MNT/foo $SCRATCH_MNT/mydir/foo_3
$XFS_IO_PROG -f -c "pwrite -S 0xff 0 64K" $SCRATCH_MNT/hello | _filter_xfs_io
ln $SCRATCH_MNT/hello $SCRATCH_MNT/mydir/hello_2
# Add some subdirectories and new files and links to them. This is to verify
# that after fsyncing our top level directory 'mydir', all the subdirectories
# and their files/links are registered in the fsync log and exist after the
# fsync log is replayed.
mkdir -p $SCRATCH_MNT/mydir/x/y/z
ln $SCRATCH_MNT/foo $SCRATCH_MNT/mydir/x/y/foo_y_link
ln $SCRATCH_MNT/foo $SCRATCH_MNT/mydir/x/y/z/foo_z_link
touch $SCRATCH_MNT/mydir/x/y/z/qwerty
# Now fsync only our top directory.
$XFS_IO_PROG -c "fsync" $SCRATCH_MNT/mydir
# And fsync now our new file named 'hello', just to verify later that it has
# the expected content and that the previous fsync on the directory 'mydir' had
# no bad influence on this fsync.
$XFS_IO_PROG -c "fsync" $SCRATCH_MNT/hello
# Simulate a crash/power loss.
_load_flakey_table $FLAKEY_DROP_WRITES
_unmount_flakey
_load_flakey_table $FLAKEY_ALLOW_WRITES
_mount_flakey
# Verify the content of our file 'foo' remains the same as before, 8192 bytes,
# all with the value 0xaa.
echo "File 'foo' content after log replay:"
od -t x1 $SCRATCH_MNT/foo
# Remove the first name of our inode. Because of the directory fsync bug, the
# inode's link count was 1 instead of 5, so removing the 'foo' name ended up
# deleting the inode and the other names became stale directory entries (still
# visible to applications). Attempting to remove or access the remaining
# dentries pointing to that inode resulted in stale file handle errors and
# made it impossible to remove the parent directories since it was impossible
# for them to become empty.
echo "file 'foo' link count after log replay: $(stat -c %h $SCRATCH_MNT/foo)"
rm -f $SCRATCH_MNT/foo
# Now verify that all files, links and directories created before fsyncing our
# directory exist after the fsync log was replayed.
[ -f $SCRATCH_MNT/mydir/foo_2 ] || echo "Link mydir/foo_2 is missing"
[ -f $SCRATCH_MNT/mydir/foo_3 ] || echo "Link mydir/foo_3 is missing"
[ -f $SCRATCH_MNT/hello ] || echo "File hello is missing"
[ -f $SCRATCH_MNT/mydir/hello_2 ] || echo "Link mydir/hello_2 is missing"
[ -f $SCRATCH_MNT/mydir/x/y/foo_y_link ] || \
echo "Link mydir/x/y/foo_y_link is missing"
[ -f $SCRATCH_MNT/mydir/x/y/z/foo_z_link ] || \
echo "Link mydir/x/y/z/foo_z_link is missing"
[ -f $SCRATCH_MNT/mydir/x/y/z/qwerty ] || \
echo "File mydir/x/y/z/qwerty is missing"
# We expect our file here to have a size of 64Kb and all the bytes having the
# value 0xff.
echo "file 'hello' content after log replay:"
od -t x1 $SCRATCH_MNT/hello
# Now remove all files/links, under our test directory 'mydir', and verify we
# can remove all the directories.
rm -f $SCRATCH_MNT/mydir/x/y/z/*
rmdir $SCRATCH_MNT/mydir/x/y/z
rm -f $SCRATCH_MNT/mydir/x/y/*
rmdir $SCRATCH_MNT/mydir/x/y
rmdir $SCRATCH_MNT/mydir/x
rm -f $SCRATCH_MNT/mydir/*
rmdir $SCRATCH_MNT/mydir
# An fsck, run by the fstests framework everytime a test finishes, also detected
# the inconsistency and printed the following error message:
#
# root 5 inode 257 errors 2001, no inode item, link count wrong
# unresolved ref dir 258 index 2 namelen 5 name foo_2 filetype 1 errors 4, no inode ref
# unresolved ref dir 258 index 3 namelen 5 name foo_3 filetype 1 errors 4, no inode ref
status=0
exit
The expected golden output for the test is:
wrote 8192/8192 bytes at offset 0
XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
wrote 65536/65536 bytes at offset 0
XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
File 'foo' content after log replay:
0000000 aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa
*
0020000
file 'foo' link count after log replay: 5
file 'hello' content after log replay:
0000000 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
*
0200000
Which is the output after this patch and when running the test against
ext3/4, xfs, f2fs, reiserfs or nilfs2. Without this patch, the test's
output is:
wrote 8192/8192 bytes at offset 0
XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
wrote 65536/65536 bytes at offset 0
XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
File 'foo' content after log replay:
0000000 aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa
*
0020000
file 'foo' link count after log replay: 1
Link mydir/foo_2 is missing
Link mydir/foo_3 is missing
Link mydir/x/y/foo_y_link is missing
Link mydir/x/y/z/foo_z_link is missing
File mydir/x/y/z/qwerty is missing
file 'hello' content after log replay:
0000000 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
*
0200000
rmdir: failed to remove '/home/fdmanana/btrfs-tests/scratch_1/mydir/x/y/z': No such file or directory
rmdir: failed to remove '/home/fdmanana/btrfs-tests/scratch_1/mydir/x/y': No such file or directory
rmdir: failed to remove '/home/fdmanana/btrfs-tests/scratch_1/mydir/x': No such file or directory
rm: cannot remove '/home/fdmanana/btrfs-tests/scratch_1/mydir/foo_2': Stale file handle
rm: cannot remove '/home/fdmanana/btrfs-tests/scratch_1/mydir/foo_3': Stale file handle
rmdir: failed to remove '/home/fdmanana/btrfs-tests/scratch_1/mydir': Directory not empty
Fsck, without this fix, also complains about the wrong link count:
root 5 inode 257 errors 2001, no inode item, link count wrong
unresolved ref dir 258 index 2 namelen 5 name foo_2 filetype 1 errors 4, no inode ref
unresolved ref dir 258 index 3 namelen 5 name foo_3 filetype 1 errors 4, no inode ref
So fix this by logging the inodes that the dentries point to when
fsyncing a directory.
A test case for xfstests follows.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
After looking at Liu Bo's recent patch (titled
"Btrfs: fix comp_oper to get right order") I realized the search made by
qgroup_oper_exists() was buggy because its rbtree navigation comparison
function, comp_oper_exist(), only looks at the fields bytenr and ref_root
of a tree node, ignoring the seq field completely. This was wrong because
when we insert a node into the rbtree we use comp_oper(), which takes a
decision based first on bytenr, then on seq and then on the ref_root field.
That means qgroup_oper_exists() could miss the fact that at least one
operation with given bytenr and ref_root exists.
Consider the following simple example of a 3 nodes qgroup operations
rbtree (created using comp_oper before this patch), where each node's key
is a tuple with the shape (bytenr, seq, ref_root, op):
[ (4096, 2, 20, op X) ]
/ \
/ \
[ (4096, 1, 5, op Y) ] [ (4096, 3, 10, op Z) ]
qgroup_oper_exists() when called to search for an existing operation for
bytenr 4096 and ref root 10 wouldn't find anything because it would go to
the left subtree instead of the right subtree, since comp_oper_exits()
ignores the seq field completely.
Fix this by changing the insertion navigation function to use the ref_root
field right after using the bytenr field and before using the seq field,
so that qgroup_oper_exists() / comp_oper_exist() work as expected.
This patch applies on top of the patch mentioned above from Liu.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
If we fallocate(), without the keep size flag, into an area already covered
by an extent previously fallocated, we were updating the inode's i_size but
we weren't updating the inode item in the fs/subvol tree. A following umount
+ mount would result in a loss of the inode's size (and an fsync would miss
too the fact that the inode changed).
Reproducer:
$ mkfs.btrfs -f /dev/sdd
$ mount /dev/sdd /mnt
$ fallocate -n -l 1M /mnt/foobar
$ fallocate -l 512K /mnt/foobar
$ umount /mnt
$ mount /dev/sdd /mnt
$ od -t x1 /mnt/foobar
0000000
The expected result is:
$ od -t x1 /mnt/foobar
0000000 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
*
2000000
A test case for fstests follows soon.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Chris Mason <clm@fb.com>
The logic to detect path loops when attempting to apply a pending
directory rename, introduced in commit
f959492fc1 (Btrfs: send, fix more issues related to directory renames)
is no longer needed, and the respective fstests test case for that commit,
btrfs/045, now passes without this code (as well as all the other test
cases for send/receive).
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
If a directory's reference ends up being orphanized, because the inode
currently being processed has a new path that matches that directory's
path, make sure we evict the name of the directory from the name cache.
This is because there might be descendent inodes (either directories or
regular files) that will be orphanized later too, and therefore the
orphan name of the ancestor must be used, otherwise we send issue rename
operations with a wrong path in the send stream.
Reproducer:
$ mkfs.btrfs -f /dev/sdb
$ mount /dev/sdb /mnt
$ mkdir -p /mnt/data/n1/n2/p1/p2
$ mkdir /mnt/data/n4
$ mkdir -p /mnt/data/p1/p2
$ btrfs subvolume snapshot -r /mnt /mnt/snap1
$ mv /mnt/data/p1/p2 /mnt/data
$ mv /mnt/data/n1/n2/p1/p2 /mnt/data/p1
$ mv /mnt/data/p2 /mnt/data/n1/n2/p1
$ mv /mnt/data/n1/n2 /mnt/data/p1
$ mv /mnt/data/p1 /mnt/data/n4
$ mv /mnt/data/n4/p1/n2/p1 /mnt/data
$ btrfs subvolume snapshot -r /mnt /mnt/snap2
$ btrfs send /mnt/snap1 -f /tmp/1.send
$ btrfs send -p /mnt/snap1 /mnt/snap2 -f /tmp/2.send
$ mkfs.btrfs -f /dev/sdc
$ mount /dev/sdc /mnt2
$ btrfs receive /mnt2 -f /tmp/1.send
$ btrfs receive /mnt2 -f /tmp/2.send
ERROR: rename data/p1/p2 -> data/n4/p1/p2 failed. no such file or directory
Directories data/p1 (inode 263) and data/p1/p2 (inode 264) in the parent
snapshot are both orphanized during the incremental send, and as soon as
data/p1 is orphanized, we must make sure that when orphanizing data/p1/p2
we use a source path of o263-6-o/p2 for the rename operation instead of
the old path data/p1/p2 (the one before the orphanization of inode 263).
A test case for xfstests follows soon.
Reported-by: Robbie Ko <robbieko@synology.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
If the clone root was not readonly or the dead flag was set on it, we were
leaving without decrementing the root's send_progress counter (and before
we just incremented it). If a concurrent snapshot deletion was in progress
and ended up being aborted, it would be impossible to later attempt to
delete again the snapshot, since the root's send_in_progress counter could
never go back to 0.
We were also setting clone_sources_to_rollback to i + 1 too early - if we
bailed out because the clone root we got is not readonly or flagged as dead
we ended up later derreferencing a null pointer because we didn't assign
the clone root to sctx->clone_roots[i].root:
for (i = 0; sctx && i < clone_sources_to_rollback; i++)
btrfs_root_dec_send_in_progress(
sctx->clone_roots[i].root);
So just don't increment the send_in_progress counter if the root is readonly
or flagged as dead.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
After we locked the root's root item, a concurrent snapshot deletion
call might have set the dead flag on it. So check if the dead flag
is set and abort if it is, just like we do for the parent root.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
If we deleted xattrs from a file and fsynced the file, after a log replay
the xattrs would remain associated to the file. This was an unexpected
behaviour and differs from what other filesystems do, such as for example
xfs and ext3/4.
Fix this by, on fsync log replay, check if every xattr in the fs/subvol
tree (that belongs to a logged inode) has a matching xattr in the log,
and if it does not, delete it from the fs/subvol tree. This is a similar
approach to what we do for dentries when we replay a directory from the
fsync log.
This issue is trivial to reproduce, and the following excerpt from my
test for xfstests triggers the issue:
_crash_and_mount()
{
# Simulate a crash/power loss.
_load_flakey_table $FLAKEY_DROP_WRITES
_unmount_flakey
_load_flakey_table $FLAKEY_ALLOW_WRITES
_mount_flakey
}
rm -f $seqres.full
_scratch_mkfs >> $seqres.full 2>&1
_init_flakey
_mount_flakey
# Create out test file and add 3 xattrs to it.
touch $SCRATCH_MNT/foobar
$SETFATTR_PROG -n user.attr1 -v val1 $SCRATCH_MNT/foobar
$SETFATTR_PROG -n user.attr2 -v val2 $SCRATCH_MNT/foobar
$SETFATTR_PROG -n user.attr3 -v val3 $SCRATCH_MNT/foobar
# Make sure everything is durably persisted.
sync
# Now delete the second xattr and fsync the inode.
$SETFATTR_PROG -x user.attr2 $SCRATCH_MNT/foobar
$XFS_IO_PROG -c "fsync" $SCRATCH_MNT/foobar
_crash_and_mount
# After the fsync log is replayed, the file should have only 2 xattrs, the ones
# named user.attr1 and user.attr3. The btrfs fsync log replay bug left the file
# with the 3 xattrs that we had before deleting the second one and fsyncing the
# file.
echo "xattr names and values after first fsync log replay:"
$GETFATTR_PROG --absolute-names --dump $SCRATCH_MNT/foobar | _filter_scratch
# Now write some data to our file, fsync it, remove the first xattr, add a new
# hard link to our file and commit the fsync log by fsyncing some other new
# file. This is to verify that after log replay our first xattr does not exist
# anymore.
echo "hello world!" >> $SCRATCH_MNT/foobar
$XFS_IO_PROG -c "fsync" $SCRATCH_MNT/foobar
$SETFATTR_PROG -x user.attr1 $SCRATCH_MNT/foobar
ln $SCRATCH_MNT/foobar $SCRATCH_MNT/foobar_link
touch $SCRATCH_MNT/qwerty
$XFS_IO_PROG -c "fsync" $SCRATCH_MNT/qwerty
_crash_and_mount
# Now only the xattr with name user.attr3 should be set in our file.
echo "xattr names and values after second fsync log replay:"
$GETFATTR_PROG --absolute-names --dump $SCRATCH_MNT/foobar | _filter_scratch
status=0
exit
The expected golden output, which is produced with this patch applied or
when testing against xfs or ext3/4, is:
xattr names and values after first fsync log replay:
# file: SCRATCH_MNT/foobar
user.attr1="val1"
user.attr3="val3"
xattr names and values after second fsync log replay:
# file: SCRATCH_MNT/foobar
user.attr3="val3"
Without this patch applied, the output is:
xattr names and values after first fsync log replay:
# file: SCRATCH_MNT/foobar
user.attr1="val1"
user.attr2="val2"
user.attr3="val3"
xattr names and values after second fsync log replay:
# file: SCRATCH_MNT/foobar
user.attr1="val1"
user.attr2="val2"
user.attr3="val3"
A patch with a test case for xfstests follows soon.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
struct kiocb now is a generic I/O container, so move it to fs.h.
Also do a #include diet for aio.h while we're at it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Pull btrfs fixes from Chris Mason:
"Most of these are fixing extent reservation accounting, or corners
with tree writeback during commit.
Josef's set does add a test, which isn't strictly a fix, but it'll
keep us from making this same mistake again"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
Btrfs: fix outstanding_extents accounting in DIO
Btrfs: add sanity test for outstanding_extents accounting
Btrfs: just free dummy extent buffers
Btrfs: account merges/splits properly
Btrfs: prepare block group cache before writing
Btrfs: fix ASSERT(list_empty(&cur_trans->dirty_bgs_list)
Btrfs: account for the correct number of extents for delalloc reservations
Btrfs: fix merge delalloc logic
Btrfs: fix comp_oper to get right order
Btrfs: catch transaction abortion after waiting for it
btrfs: fix sizeof format specifier in btrfs_check_super_valid()
We are keeping track of how many extents we need to reserve properly based on
the amount we want to write, but we were still incrementing outstanding_extents
if we wrote less than what we requested. This isn't quite right since we will
be limited to our max extent size. So instead lets do something horrible! Keep
track of how many outstanding_extents we reserved, and decrement each time we
allocate an extent. If we use our entire reserve make sure to jack up
outstanding_extents on the inode so the accounting works out properly. Thanks,
Reported-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <jbacik@fb.com>
I introduced a regression wrt outstanding_extents accounting. These are tricky
areas that aren't easily covered by xfstests as we could change MAX_EXTENT_SIZE
at any time. So add sanity tests to cover the various conditions that are
tricky in order to make sure we don't introduce regressions in the future.
Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
If we fail during our sanity tests we could get NULL deref's because we unload
the module before the dummy extent buffers are free'd via RCU. So check for
this case and just free the things directly. Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
My fix
Btrfs: fix merge delalloc logic
only fixed half of the problems, it didn't fix the case where we have two large
extents on either side and then join them together with a new small extent. We
need to instead keep track of how many extents we have accounted for with each
side of the new extent, and then see how many extents we need for the new large
extent. If they match then we know we need to keep our reservation, otherwise
we need to drop our reservation. This shows up with a case like this
[BTRFS_MAX_EXTENT_SIZE+4K][4K HOLE][BTRFS_MAX_EXTENT_SIZE+4K]
Previously the logic would have said that the number extents required for the
new size (3) is larger than the number of extents required for the largest side
(2) therefore we need to keep our reservation. But this isn't the case, since
both sides require a reservation of 2 which leads to 4 for the whole range
currently reserved, but we only need 3, so we need to drop one of the
reservations. The same problem existed for splits, we'd think we only need 3
extents when creating the hole but in reality we need 4. Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Writing the block group cache will modify the extent tree quite a bit because it
truncates the old space cache and pre-allocates new stuff. To try and cut down
on the churn lets do the setup dance first, then later on hopefully we can avoid
looping with newly dirtied roots. Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Dave could hit this assert consistently running btrfs/078. This is because
when we update the block groups we could truncate the free space, which would
try to delete the csums for that range and dirty the csum root. For this to
happen we have to have already written out the csum root so it's kind of hard to
hit this case. This patch fixes this by changing the logic to only write the
dirty block groups if the dirty_cowonly_roots list is empty. This will get us
the same effect as before since we add the extent root last, and will cover the
case that we dirty some other root again but not the extent root. Thanks,
Reported-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
Direct IO can easily pass in an buffer that is greater than
BTRFS_MAX_EXTENT_SIZE, so take this into account when reserving extents in the
delalloc reservation code. Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
My patch to properly count outstanding extents wrt MAX_EXTENT_SIZE introduced a
regression when re-dirtying already dirty areas. We have logic in split to make
sure we are taking the largest space into account but didn't have it for merge,
so it was sometimes making us think we were turning a tiny extent into a huge
extent, when in reality we already had a huge extent and needed to use the other
side in our logic. This fixes the regression that was reported by a user on
list. Thanks,
Reported-by: Markus Trippelsdorf <markus@trippelsdorf.de>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
Case (oper1->seq > oper2->seq) should differ with case (oper1->seq < oper2->seq).
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.cz>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
This problem is uncovered by a test case: http://patchwork.ozlabs.org/patch/244297.
Fsync() can report success when it actually doesn't. When we
have several threads running fsync() at the same tiem and in one fsync() we
get a transaction abortion due to some problems(in the test case it's disk
failures), and other fsync()s may return successfully which makes userspace
programs think that data is now safely flushed into disk.
It's because that after fsyncs() fail btrfs_sync_log() due to disk failures,
they get to try btrfs_commit_transaction() where it finds that there is
already a transaction being committed, and they'll just call wait_for_commit()
and return. Note that we actually check "trans->aborted" in btrfs_end_transaction,
but it's likely that the error message is still not yet throwed out and only after
wait_for_commit() we're sure whether the transaction is committed successfully.
This add the necessary check and it now passes the test.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Chris Mason <clm@fb.com>
This patch fixes mips compilation warning:
fs/btrfs/disk-io.c: In function 'btrfs_check_super_valid':
fs/btrfs/disk-io.c:3927:21: warning: format '%lu' expects argument
of type 'long unsigned int', but argument 3 has type 'unsigned int' [-Wformat]
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Chris Mason <clm@fb.com>
Pull btrfs fixes from Chris Mason:
"Outside of misc fixes, Filipe has a few fsync corners and we're
pulling in one more of Josef's fixes from production use here"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
Btrfs:__add_inode_ref: out of bounds memory read when looking for extended ref.
Btrfs: fix data loss in the fast fsync path
Btrfs: remove extra run_delayed_refs in update_cowonly_root
Btrfs: incremental send, don't rename a directory too soon
btrfs: fix lost return value due to variable shadowing
Btrfs: do not ignore errors from btrfs_lookup_xattr in do_setxattr
Btrfs: fix off-by-one logic error in btrfs_realloc_node
Btrfs: add missing inode update when punching hole
Btrfs: abort the transaction if we fail to update the free space cache inode
Btrfs: fix fsync race leading to ordered extent memory leaks
Improper arithmetics when calculting the address of the extended ref could
lead to an out of bounds memory read and kernel panic.
Signed-off-by: Quentin Casasnovas <quentin.casasnovas@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.cz>
cc: stable@vger.kernel.org # v3.7+
Signed-off-by: Chris Mason <clm@fb.com>
When using the fast file fsync code path we can miss the fact that new
writes happened since the last file fsync and therefore return without
waiting for the IO to finish and write the new extents to the fsync log.
Here's an example scenario where the fsync will miss the fact that new
file data exists that wasn't yet durably persisted:
1. fs_info->last_trans_committed == N - 1 and current transaction is
transaction N (fs_info->generation == N);
2. do a buffered write;
3. fsync our inode, this clears our inode's full sync flag, starts
an ordered extent and waits for it to complete - when it completes
at btrfs_finish_ordered_io(), the inode's last_trans is set to the
value N (via btrfs_update_inode_fallback -> btrfs_update_inode ->
btrfs_set_inode_last_trans);
4. transaction N is committed, so fs_info->last_trans_committed is now
set to the value N and fs_info->generation remains with the value N;
5. do another buffered write, when this happens btrfs_file_write_iter
sets our inode's last_trans to the value N + 1 (that is
fs_info->generation + 1 == N + 1);
6. transaction N + 1 is started and fs_info->generation now has the
value N + 1;
7. transaction N + 1 is committed, so fs_info->last_trans_committed
is set to the value N + 1;
8. fsync our inode - because it doesn't have the full sync flag set,
we only start the ordered extent, we don't wait for it to complete
(only in a later phase) therefore its last_trans field has the
value N + 1 set previously by btrfs_file_write_iter(), and so we
have:
inode->last_trans <= fs_info->last_trans_committed
(N + 1) (N + 1)
Which made us not log the last buffered write and exit the fsync
handler immediately, returning success (0) to user space and resulting
in data loss after a crash.
This can actually be triggered deterministically and the following excerpt
from a testcase I made for xfstests triggers the issue. It moves a dummy
file across directories and then fsyncs the old parent directory - this
is just to trigger a transaction commit, so moving files around isn't
directly related to the issue but it was chosen because running 'sync' for
example does more than just committing the current transaction, as it
flushes/waits for all file data to be persisted. The issue can also happen
at random periods, since the transaction kthread periodicaly commits the
current transaction (about every 30 seconds by default).
The body of the test is:
_scratch_mkfs >> $seqres.full 2>&1
_init_flakey
_mount_flakey
# Create our main test file 'foo', the one we check for data loss.
# By doing an fsync against our file, it makes btrfs clear the 'needs_full_sync'
# bit from its flags (btrfs inode specific flags).
$XFS_IO_PROG -f -c "pwrite -S 0xaa 0 8K" \
-c "fsync" $SCRATCH_MNT/foo | _filter_xfs_io
# Now create one other file and 2 directories. We will move this second file
# from one directory to the other later because it forces btrfs to commit its
# currently open transaction if we fsync the old parent directory. This is
# necessary to trigger the data loss bug that affected btrfs.
mkdir $SCRATCH_MNT/testdir_1
touch $SCRATCH_MNT/testdir_1/bar
mkdir $SCRATCH_MNT/testdir_2
# Make sure everything is durably persisted.
sync
# Write more 8Kb of data to our file.
$XFS_IO_PROG -c "pwrite -S 0xbb 8K 8K" $SCRATCH_MNT/foo | _filter_xfs_io
# Move our 'bar' file into a new directory.
mv $SCRATCH_MNT/testdir_1/bar $SCRATCH_MNT/testdir_2/bar
# Fsync our first directory. Because it had a file moved into some other
# directory, this made btrfs commit the currently open transaction. This is
# a condition necessary to trigger the data loss bug.
$XFS_IO_PROG -c "fsync" $SCRATCH_MNT/testdir_1
# Now fsync our main test file. If the fsync succeeds, we expect the 8Kb of
# data we wrote previously to be persisted and available if a crash happens.
# This did not happen with btrfs, because of the transaction commit that
# happened when we fsynced the parent directory.
$XFS_IO_PROG -c "fsync" $SCRATCH_MNT/foo
# Simulate a crash/power loss.
_load_flakey_table $FLAKEY_DROP_WRITES
_unmount_flakey
_load_flakey_table $FLAKEY_ALLOW_WRITES
_mount_flakey
# Now check that all data we wrote before are available.
echo "File content after log replay:"
od -t x1 $SCRATCH_MNT/foo
status=0
exit
The expected golden output for the test, which is what we get with this
fix applied (or when running against ext3/4 and xfs), is:
wrote 8192/8192 bytes at offset 0
XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
wrote 8192/8192 bytes at offset 8192
XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
File content after log replay:
0000000 aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa
*
0020000 bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb
*
0040000
Without this fix applied, the output shows the test file does not have
the second 8Kb extent that we successfully fsynced:
wrote 8192/8192 bytes at offset 0
XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
wrote 8192/8192 bytes at offset 8192
XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
File content after log replay:
0000000 aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa
*
0020000
So fix this by skipping the fsync only if we're doing a full sync and
if the inode's last_trans is <= fs_info->last_trans_committed, or if
the inode is already in the log. Also remove setting the inode's
last_trans in btrfs_file_write_iter since it's useless/unreliable.
Also because btrfs_file_write_iter no longer sets inode->last_trans to
fs_info->generation + 1, don't set last_trans to 0 if we bail out and don't
bail out if last_trans is 0, otherwise something as simple as the following
example wouldn't log the second write on the last fsync:
1. write to file
2. fsync file
3. fsync file
|--> btrfs_inode_in_log() returns true and it set last_trans to 0
4. write to file
|--> btrfs_file_write_iter() no longers sets last_trans, so it
remained with a value of 0
5. fsync
|--> inode->last_trans == 0, so it bails out without logging the
second write
A test case for xfstests will be sent soon.
CC: <stable@vger.kernel.org>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
1) We can safely use the function's 'i'. Fixes warning
fs/btrfs/volumes.c:5257:7: warning: declaration of 'i' shadows a previous local
fs/btrfs/volumes.c:4951:6: warning: shadowed declaration is here
2) A local variable duplicates name of an argument, we can use the value
directly. Fixes warning
fs/btrfs/volumes.c:5433:8: warning: declaration of 'length' shadows a parameter
fs/btrfs/volumes.c:4935:27: warning: shadowed declaration is here
Signed-off-by: David Sterba <dsterba@suse.cz>
The conversion macros use nested container_of that leads to a warning
fs/btrfs/sysfs.c: In function 'btrfs_feature_visible':
fs/btrfs/sysfs.c:183:8: warning: declaration of '__mptr' shadows a previous local
fs/btrfs/sysfs.c:183:8: warning: shadowed declaration is here
Use of functions will add proper type checking.
Signed-off-by: David Sterba <dsterba@suse.cz>
The divisor is derived from nodesize or PAGE_SIZE, fits into 32bit type.
Get rid of a few more do_div instances.
Signed-off-by: David Sterba <dsterba@suse.cz>
Using {} as initializer for struct seq_elem does not properly initialize
the list_head member, but it currently works because it gets set through
btrfs_get_tree_mod_seq if 'seq' is 0.
Signed-off-by: David Sterba <dsterba@suse.cz>
There are lockstart and lockend defined in the function and not used
after their duplicate definition scope ends, it's safe to reuse them.
Signed-off-by: David Sterba <dsterba@suse.cz>
Convert kmalloc(nr * size, ..) to kmalloc_array that does additional
overflow checks, the zeroing variant is kcalloc.
Signed-off-by: David Sterba <dsterba@suse.cz>
Switch to div_u64 if the divisor is a numeric constant or sum of
sizeof()s. We can remove a few instances of do_div that has the hidden
semtantics of changing the 1st argument.
Small power-of-two divisors are converted to bitshifts, large values are
kept intact for clarity.
Signed-off-by: David Sterba <dsterba@suse.cz>
Clean the opencoded variant, cond_resched_lock also checks the lock for
contention so it might help in some cases that were not covered by
simple need_resched().
Signed-off-by: David Sterba <dsterba@suse.cz>
There's one more case where we can't issue a rename operation for a
directory as soon as we process it. We used to delay directory renames
only if they have some ancestor directory with a higher inode number
that got renamed too, but there's another case where we need to delay
the rename too - when a directory A is renamed to the old name of a
directory B but that directory B has its rename delayed because it
has now (in the send root) an ancestor with a higher inode number that
was renamed. If we don't delay the directory rename in this case, the
receiving end of the send stream will attempt to rename A to the old
name of B before B got renamed to its new name, which results in a
"directory not empty" error. So fix this by delaying directory renames
for this case too.
Steps to reproduce:
$ mkfs.btrfs -f /dev/sdb
$ mount /dev/sdb /mnt
$ mkdir /mnt/a
$ mkdir /mnt/b
$ mkdir /mnt/c
$ touch /mnt/a/file
$ btrfs subvolume snapshot -r /mnt /mnt/snap1
$ mv /mnt/c /mnt/x
$ mv /mnt/a /mnt/x/y
$ mv /mnt/b /mnt/a
$ btrfs subvolume snapshot -r /mnt /mnt/snap2
$ btrfs send /mnt/snap1 -f /tmp/1.send
$ btrfs send -p /mnt/snap1 /mnt/snap2 -f /tmp/2.send
$ mkfs.btrfs -f /dev/sdc
$ mount /dev/sdc /mnt2
$ btrfs receive /mnt2 -f /tmp/1.send
$ btrfs receive /mnt2 -f /tmp/2.send
ERROR: rename b -> a failed. Directory not empty
A test case for xfstests follows soon.
Reported-by: Ames Cornish <ames@cornishes.net>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
A block-local variable stores error code but btrfs_get_blocks_direct may
not return it in the end as there's a ret defined in the function scope.
CC: <stable@vger.kernel.org> # 3.6+
Fixes: d187663ef2 ("Btrfs: lock extents as we map them in DIO")
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
The return value from btrfs_lookup_xattr() can be a pointer encoding an
error, therefore deal with it. This fixes commit 5f5bc6b1e2
("Btrfs: make xattr replace operations atomic").
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
The end_slot variable actually matches the number of pointers in the
node and not the last slot (which is 'nritems - 1'). Therefore in order
to check that the current slot in the for loop doesn't match the last
one, the correct logic is to check if 'i' is less than 'end_slot - 1'
and not 'end_slot - 2'.
Fix this and set end_slot to be 'nritems - 1', as it's less confusing
since the variable name implies it's inclusive rather then exclusive.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
When punching a file hole if we endup only zeroing parts of a page,
because the start offset isn't a multiple of the sector size or the
start offset and length fall within the same page, we were not updating
the inode item. This prevented an fsync from doing anything, if no other
file changes happened in the current transaction, because the fields
in btrfs_inode used to check if the inode needs to be fsync'ed weren't
updated.
This issue is easy to reproduce and the following excerpt from the
xfstest case I made shows how to trigger it:
_scratch_mkfs >> $seqres.full 2>&1
_init_flakey
_mount_flakey
# Create our test file.
$XFS_IO_PROG -f -c "pwrite -S 0x22 -b 16K 0 16K" \
$SCRATCH_MNT/foo | _filter_xfs_io
# Fsync the file, this makes btrfs update some btrfs inode specific fields
# that are used to track if the inode needs to be written/updated to the fsync
# log or not. After this fsync, the new values for those fields indicate that
# a subsequent fsync does not need to touch the fsync log.
$XFS_IO_PROG -c "fsync" $SCRATCH_MNT/foo
# Force a commit of the current transaction. After this point, any operation
# that modifies the data or metadata of our file, should update those fields in
# the btrfs inode with values that make the next fsync operation write to the
# fsync log.
sync
# Punch a hole in our file. This small range affects only 1 page.
# This made the btrfs hole punching implementation write only some zeroes in
# one page, but it did not update the btrfs inode fields used to determine if
# the next fsync needs to write to the fsync log.
$XFS_IO_PROG -c "fpunch 8000 4K" $SCRATCH_MNT/foo
# Another variation of the previously mentioned case.
$XFS_IO_PROG -c "fpunch 15000 100" $SCRATCH_MNT/foo
# Now fsync the file. This was a no-operation because the previous hole punch
# operation didn't update the inode's fields mentioned before, so they remained
# with the values they had after the first fsync - that is, they indicate that
# it is not needed to write to fsync log.
$XFS_IO_PROG -c "fsync" $SCRATCH_MNT/foo
echo "File content before:"
od -t x1 $SCRATCH_MNT/foo
# Simulate a crash/power loss.
_load_flakey_table $FLAKEY_DROP_WRITES
_unmount_flakey
# Enable writes and mount the fs. This makes the fsync log replay code run.
_load_flakey_table $FLAKEY_ALLOW_WRITES
_mount_flakey
# Because the last fsync didn't do anything, here the file content matched what
# it was after the first fsync, before the holes were punched, and not what it
# was after the holes were punched.
echo "File content after:"
od -t x1 $SCRATCH_MNT/foo
This issue has been around since 2012, when the punch hole implementation
was added, commit 2aaa665581 ("Btrfs: add hole punching").
A test case for xfstests follows soon.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Chris Mason <clm@fb.com>
Our gluster boxes were hitting a problem where they'd run out of space when
updating the block group cache and therefore wouldn't be able to update the free
space inode. This is a problem because this is how we invalidate the cache and
protect ourselves from errors further down the stack, so if this fails we have
to abort the transaction so we make sure we don't end up with stale free space
cache. Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
We can have multiple fsync operations against the same file during the
same transaction and they can collect the same ordered extents while they
don't complete (still accessible from the inode's ordered tree). If this
happens, those ordered extents will never get their reference counts
decremented to 0, leading to memory leaks and inode leaks (an iput for an
ordered extent's inode is scheduled only when the ordered extent's refcount
drops to 0). The following sequence diagram explains this race:
CPU 1 CPU 2
btrfs_sync_file()
btrfs_sync_file()
mutex_lock(inode->i_mutex)
btrfs_log_inode()
btrfs_get_logged_extents()
--> collects ordered extent X
--> increments ordered
extent X's refcount
btrfs_submit_logged_extents()
mutex_unlock(inode->i_mutex)
mutex_lock(inode->i_mutex)
btrfs_sync_log()
btrfs_wait_logged_extents()
--> list_del_init(&ordered->log_list)
btrfs_log_inode()
btrfs_get_logged_extents()
--> Adds ordered extent X
to logged_list because
at this point:
list_empty(&ordered->log_list)
&& test_bit(BTRFS_ORDERED_LOGGED,
&ordered->flags) == 0
--> Increments ordered extent
X's refcount
--> check if ordered extent's io is
finished or not, start it if
necessary and wait for it to finish
--> sets bit BTRFS_ORDERED_LOGGED
on ordered extent X's flags
and adds it to trans->ordered
btrfs_sync_log() finishes
btrfs_submit_logged_extents()
btrfs_log_inode() finishes
mutex_unlock(inode->i_mutex)
btrfs_sync_file() finishes
btrfs_sync_log()
btrfs_wait_logged_extents()
--> Sees ordered extent X has the
bit BTRFS_ORDERED_LOGGED set in
its flags
--> X's refcount is untouched
btrfs_sync_log() finishes
btrfs_sync_file() finishes
btrfs_commit_transaction()
--> called by transaction kthread for e.g.
btrfs_wait_pending_ordered()
--> waits for ordered extent X to
complete
--> decrements ordered extent X's
refcount by 1 only, corresponding
to the increment done by the fsync
task ran by CPU 1
In the scenario of the above diagram, after the transaction commit,
the ordered extent will remain with a refcount of 1 forever, leaking
the ordered extent structure and preventing the i_count of its inode
from ever decreasing to 0, since the delayed iput is scheduled only
when the ordered extent's refcount drops to 0, preventing the inode
from ever being evicted by the VFS.
Fix this by using the flag BTRFS_ORDERED_LOGGED differently. Use it to
mean that an ordered extent is already being processed by an fsync call,
which will attach it to the current transaction, preventing it from being
collected by subsequent fsync operations against the same inode.
This race was introduced with the following change (added in 3.19 and
backported to stable 3.18 and 3.17):
Btrfs: make sure logged extents complete in the current transaction V3
commit 50d9aa99bd
I ran into this issue while running xfstests/generic/113 in a loop, which
failed about 1 out of 10 runs with the following warning in dmesg:
[ 2612.440038] WARNING: CPU: 4 PID: 22057 at fs/btrfs/disk-io.c:3558 free_fs_root+0x36/0x133 [btrfs]()
[ 2612.442810] Modules linked in: btrfs crc32c_generic xor raid6_pq nfsd auth_rpcgss oid_registry nfs_acl nfs lockd grace fscache sunrpc loop processor parport_pc parport psmouse therma
l_sys i2c_piix4 serio_raw pcspkr evdev microcode button i2c_core ext4 crc16 jbd2 mbcache sd_mod sg sr_mod cdrom virtio_scsi ata_generic virtio_pci ata_piix virtio_ring libata virtio flo
ppy e1000 scsi_mod [last unloaded: btrfs]
[ 2612.452711] CPU: 4 PID: 22057 Comm: umount Tainted: G W 3.19.0-rc5-btrfs-next-4+ #1
[ 2612.454921] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.7.5-0-ge51488c-20140602_164612-nilsson.home.kraxel.org 04/01/2014
[ 2612.457709] 0000000000000009 ffff8801342c3c78 ffffffff8142425e ffff88023ec8f2d8
[ 2612.459829] 0000000000000000 ffff8801342c3cb8 ffffffff81045308 ffff880046460000
[ 2612.461564] ffffffffa036da56 ffff88003d07b000 ffff880046460000 ffff880046460068
[ 2612.463163] Call Trace:
[ 2612.463719] [<ffffffff8142425e>] dump_stack+0x4c/0x65
[ 2612.464789] [<ffffffff81045308>] warn_slowpath_common+0xa1/0xbb
[ 2612.466026] [<ffffffffa036da56>] ? free_fs_root+0x36/0x133 [btrfs]
[ 2612.467247] [<ffffffff810453c5>] warn_slowpath_null+0x1a/0x1c
[ 2612.468416] [<ffffffffa036da56>] free_fs_root+0x36/0x133 [btrfs]
[ 2612.469625] [<ffffffffa036f2a7>] btrfs_drop_and_free_fs_root+0x93/0x9b [btrfs]
[ 2612.471251] [<ffffffffa036f353>] btrfs_free_fs_roots+0xa4/0xd6 [btrfs]
[ 2612.472536] [<ffffffff8142612e>] ? wait_for_completion+0x24/0x26
[ 2612.473742] [<ffffffffa0370bbc>] close_ctree+0x1f3/0x33c [btrfs]
[ 2612.475477] [<ffffffff81059d1d>] ? destroy_workqueue+0x148/0x1ba
[ 2612.476695] [<ffffffffa034e3da>] btrfs_put_super+0x19/0x1b [btrfs]
[ 2612.477911] [<ffffffff81153e53>] generic_shutdown_super+0x73/0xef
[ 2612.479106] [<ffffffff811540e2>] kill_anon_super+0x13/0x1e
[ 2612.480226] [<ffffffffa034e1e3>] btrfs_kill_super+0x17/0x23 [btrfs]
[ 2612.481471] [<ffffffff81154307>] deactivate_locked_super+0x3b/0x50
[ 2612.482686] [<ffffffff811547a7>] deactivate_super+0x3f/0x43
[ 2612.483791] [<ffffffff8116b3ed>] cleanup_mnt+0x59/0x78
[ 2612.484842] [<ffffffff8116b44c>] __cleanup_mnt+0x12/0x14
[ 2612.485900] [<ffffffff8105d019>] task_work_run+0x8f/0xbc
[ 2612.486960] [<ffffffff810028d8>] do_notify_resume+0x5a/0x6b
[ 2612.488083] [<ffffffff81236e5b>] ? trace_hardirqs_on_thunk+0x3a/0x3f
[ 2612.489333] [<ffffffff8142a17f>] int_signal+0x12/0x17
[ 2612.490353] ---[ end trace 54a960a6bdcb8d93 ]---
[ 2612.557253] VFS: Busy inodes after unmount of sdb. Self-destruct in 5 seconds. Have a nice day...
Kmemleak confirmed the ordered extent leak (and btrfs inode specific
structures such as delayed nodes):
$ cat /sys/kernel/debug/kmemleak
unreferenced object 0xffff880154290db0 (size 576):
comm "btrfsck", pid 21980, jiffies 4295542503 (age 1273.412s)
hex dump (first 32 bytes):
01 40 00 00 01 00 00 00 b0 1d f1 4e 01 88 ff ff .@.........N....
00 00 00 00 00 00 00 00 c8 0d 29 54 01 88 ff ff ..........)T....
backtrace:
[<ffffffff8141d74d>] kmemleak_update_trace+0x4c/0x6a
[<ffffffff8122f2c0>] radix_tree_node_alloc+0x6d/0x83
[<ffffffff8122fb26>] __radix_tree_create+0x109/0x190
[<ffffffff8122fbdd>] radix_tree_insert+0x30/0xac
[<ffffffffa03b9bde>] btrfs_get_or_create_delayed_node+0x130/0x187 [btrfs]
[<ffffffffa03bb82d>] btrfs_delayed_delete_inode_ref+0x32/0xac [btrfs]
[<ffffffffa0379dae>] __btrfs_unlink_inode+0xee/0x288 [btrfs]
[<ffffffffa037c715>] btrfs_unlink_inode+0x1e/0x40 [btrfs]
[<ffffffffa037c797>] btrfs_unlink+0x60/0x9b [btrfs]
[<ffffffff8115d7f0>] vfs_unlink+0x9c/0xed
[<ffffffff8115f5de>] do_unlinkat+0x12c/0x1fa
[<ffffffff811601a7>] SyS_unlinkat+0x29/0x2b
[<ffffffff81429e92>] system_call_fastpath+0x12/0x17
[<ffffffffffffffff>] 0xffffffffffffffff
unreferenced object 0xffff88014ef11db0 (size 576):
comm "rm", pid 22009, jiffies 4295542593 (age 1273.052s)
hex dump (first 32 bytes):
02 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 c8 1d f1 4e 01 88 ff ff ...........N....
backtrace:
[<ffffffff8141d74d>] kmemleak_update_trace+0x4c/0x6a
[<ffffffff8122f2c0>] radix_tree_node_alloc+0x6d/0x83
[<ffffffff8122fb26>] __radix_tree_create+0x109/0x190
[<ffffffff8122fbdd>] radix_tree_insert+0x30/0xac
[<ffffffffa03b9bde>] btrfs_get_or_create_delayed_node+0x130/0x187 [btrfs]
[<ffffffffa03bb82d>] btrfs_delayed_delete_inode_ref+0x32/0xac [btrfs]
[<ffffffffa0379dae>] __btrfs_unlink_inode+0xee/0x288 [btrfs]
[<ffffffffa037c715>] btrfs_unlink_inode+0x1e/0x40 [btrfs]
[<ffffffffa037c797>] btrfs_unlink+0x60/0x9b [btrfs]
[<ffffffff8115d7f0>] vfs_unlink+0x9c/0xed
[<ffffffff8115f5de>] do_unlinkat+0x12c/0x1fa
[<ffffffff811601a7>] SyS_unlinkat+0x29/0x2b
[<ffffffff81429e92>] system_call_fastpath+0x12/0x17
[<ffffffffffffffff>] 0xffffffffffffffff
unreferenced object 0xffff8800336feda8 (size 584):
comm "aio-stress", pid 22031, jiffies 4295543006 (age 1271.400s)
hex dump (first 32 bytes):
00 40 3e 00 00 00 00 00 00 00 8f 42 00 00 00 00 .@>........B....
00 00 01 00 00 00 00 00 00 00 01 00 00 00 00 00 ................
backtrace:
[<ffffffff8114eb34>] create_object+0x172/0x29a
[<ffffffff8141d790>] kmemleak_alloc+0x25/0x41
[<ffffffff81141ae6>] kmemleak_alloc_recursive.constprop.52+0x16/0x18
[<ffffffff81145288>] kmem_cache_alloc+0xf7/0x198
[<ffffffffa0389243>] __btrfs_add_ordered_extent+0x43/0x309 [btrfs]
[<ffffffffa038968b>] btrfs_add_ordered_extent_dio+0x12/0x14 [btrfs]
[<ffffffffa03810e2>] btrfs_get_blocks_direct+0x3ef/0x571 [btrfs]
[<ffffffff81181349>] do_blockdev_direct_IO+0x62a/0xb47
[<ffffffff8118189a>] __blockdev_direct_IO+0x34/0x36
[<ffffffffa03776e5>] btrfs_direct_IO+0x16a/0x1e8 [btrfs]
[<ffffffff81100373>] generic_file_direct_write+0xb8/0x12d
[<ffffffffa038615c>] btrfs_file_write_iter+0x24b/0x42f [btrfs]
[<ffffffff8118bb0d>] aio_run_iocb+0x2b7/0x32e
[<ffffffff8118c99a>] do_io_submit+0x26e/0x2ff
[<ffffffff8118ca3b>] SyS_io_submit+0x10/0x12
[<ffffffff81429e92>] system_call_fastpath+0x12/0x17
CC: <stable@vger.kernel.org> # 3.19, 3.18 and 3.17
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
Pull btrfs fix from Chris Mason:
"I'm still testing more fixes, but I wanted to get out the fix for the
btrfs raid5/6 memory corruption I mentioned in my merge window pull"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
Btrfs: fix allocation size calculations in alloc_btrfs_bio
Pull more vfs updates from Al Viro:
"Assorted stuff from this cycle. The big ones here are multilayer
overlayfs from Miklos and beginning of sorting ->d_inode accesses out
from David"
* 'for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (51 commits)
autofs4 copy_dev_ioctl(): keep the value of ->size we'd used for allocation
procfs: fix race between symlink removals and traversals
debugfs: leave freeing a symlink body until inode eviction
Documentation/filesystems/Locking: ->get_sb() is long gone
trylock_super(): replacement for grab_super_passive()
fanotify: Fix up scripted S_ISDIR/S_ISREG/S_ISLNK conversions
Cachefiles: Fix up scripted S_ISDIR/S_ISREG/S_ISLNK conversions
VFS: (Scripted) Convert S_ISLNK/DIR/REG(dentry->d_inode) to d_is_*(dentry)
SELinux: Use d_is_positive() rather than testing dentry->d_inode
Smack: Use d_is_positive() rather than testing dentry->d_inode
TOMOYO: Use d_is_dir() rather than d_inode and S_ISDIR()
Apparmor: Use d_is_positive/negative() rather than testing dentry->d_inode
Apparmor: mediated_filesystem() should use dentry->d_sb not inode->i_sb
VFS: Split DCACHE_FILE_TYPE into regular and special types
VFS: Add a fallthrough flag for marking virtual dentries
VFS: Add a whiteout dentry type
VFS: Introduce inode-getting helpers for layered/unioned fs environments
Infiniband: Fix potential NULL d_inode dereference
posix_acl: fix reference leaks in posix_acl_create
autofs4: Wrong format for printing dentry
...
Convert the following where appropriate:
(1) S_ISLNK(dentry->d_inode) to d_is_symlink(dentry).
(2) S_ISREG(dentry->d_inode) to d_is_reg(dentry).
(3) S_ISDIR(dentry->d_inode) to d_is_dir(dentry). This is actually more
complicated than it appears as some calls should be converted to
d_can_lookup() instead. The difference is whether the directory in
question is a real dir with a ->lookup op or whether it's a fake dir with
a ->d_automount op.
In some circumstances, we can subsume checks for dentry->d_inode not being
NULL into this, provided we the code isn't in a filesystem that expects
d_inode to be NULL if the dirent really *is* negative (ie. if we're going to
use d_inode() rather than d_backing_inode() to get the inode pointer).
Note that the dentry type field may be set to something other than
DCACHE_MISS_TYPE when d_inode is NULL in the case of unionmount, where the VFS
manages the fall-through from a negative dentry to a lower layer. In such a
case, the dentry type of the negative union dentry is set to the same as the
type of the lower dentry.
However, if you know d_inode is not NULL at the call site, then you can use
the d_is_xxx() functions even in a filesystem.
There is one further complication: a 0,0 chardev dentry may be labelled
DCACHE_WHITEOUT_TYPE rather than DCACHE_SPECIAL_TYPE. Strictly, this was
intended for special directory entry types that don't have attached inodes.
The following perl+coccinelle script was used:
use strict;
my @callers;
open($fd, 'git grep -l \'S_IS[A-Z].*->d_inode\' |') ||
die "Can't grep for S_ISDIR and co. callers";
@callers = <$fd>;
close($fd);
unless (@callers) {
print "No matches\n";
exit(0);
}
my @cocci = (
'@@',
'expression E;',
'@@',
'',
'- S_ISLNK(E->d_inode->i_mode)',
'+ d_is_symlink(E)',
'',
'@@',
'expression E;',
'@@',
'',
'- S_ISDIR(E->d_inode->i_mode)',
'+ d_is_dir(E)',
'',
'@@',
'expression E;',
'@@',
'',
'- S_ISREG(E->d_inode->i_mode)',
'+ d_is_reg(E)' );
my $coccifile = "tmp.sp.cocci";
open($fd, ">$coccifile") || die $coccifile;
print($fd "$_\n") || die $coccifile foreach (@cocci);
close($fd);
foreach my $file (@callers) {
chomp $file;
print "Processing ", $file, "\n";
system("spatch", "--sp-file", $coccifile, $file, "--in-place", "--no-show-diff") == 0 ||
die "spatch failed";
}
[AV: overlayfs parts skipped]
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Since commit 8e5cfb55d3 (Btrfs: Make raid_map array be inlined in
btrfs_bio structure), the raid map array is allocated along with the
btrfs bio in alloc_btrfs_bio. The calculation used to decide how much
we need to allocate was using the wrong parameter passed into the
allocation function.
The passed in real_stripes will be zero if a target replace operation
is not currently running. We want to use total_stripes instead.
Signed-off-by: Chris Mason <clm@fb.com>
Reported-by: David Sterba <dsterba@suse.cz>
Tested-by: David Sterba <dsterba@suse.cz>
Pull btrfs updates from Chris Mason:
"This pull is mostly cleanups and fixes:
- The raid5/6 cleanups from Zhao Lei fixup some long standing warts
in the code and add improvements on top of the scrubbing support
from 3.19.
- Josef has round one of our ENOSPC fixes coming from large btrfs
clusters here at FB.
- Dave Sterba continues a long series of cleanups (thanks Dave), and
Filipe continues hammering on corner cases in fsync and others
This all was held up a little trying to track down a use-after-free in
btrfs raid5/6. It's not clear yet if this is just made easier to
trigger with this pull or if its a new bug from the raid5/6 cleanups.
Dave Sterba is the only one to trigger it so far, but he has a
consistent way to reproduce, so we'll get it nailed shortly"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: (68 commits)
Btrfs: don't remove extents and xattrs when logging new names
Btrfs: fix fsync data loss after adding hard link to inode
Btrfs: fix BUG_ON in btrfs_orphan_add() when delete unused block group
Btrfs: account for large extents with enospc
Btrfs: don't set and clear delalloc for O_DIRECT writes
Btrfs: only adjust outstanding_extents when we do a short write
btrfs: Fix out-of-space bug
Btrfs: scrub, fix sleep in atomic context
Btrfs: fix scheduler warning when syncing log
Btrfs: Remove unnecessary placeholder in btrfs_err_code
btrfs: cleanup init for list in free-space-cache
btrfs: delete chunk allocation attemp when setting block group ro
btrfs: clear bio reference after submit_one_bio()
Btrfs: fix scrub race leading to use-after-free
Btrfs: add missing cleanup on sysfs init failure
Btrfs: fix race between transaction commit and empty block group removal
btrfs: add more checks to btrfs_read_sys_array
btrfs: cleanup, rename a few variables in btrfs_read_sys_array
btrfs: add checks for sys_chunk_array sizes
btrfs: more superblock checks, lower bounds on devices and sectorsize/nodesize
...
Also, remove the two local variables create_uuid_tree
and check_uuid_tree; we can use the existence of
the uuid root and/or the RESCAN_UUID_TREE flag to
determine what action to take.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
close_ctree() has a local fs_info var for convienience;
use it consistently.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
The commit:
8dabb74 Btrfs: change core code of btrfs to support the
device replace operations
added the fs_info argument, but never used it -
just remove it again.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
This patch fixes mips compilation warning:
fs/btrfs/disk-io.c: In function 'btrfs_check_super_valid':
fs/btrfs/disk-io.c:3927:21: warning: format '%lu' expects argument
of type 'long unsigned int', but argument 3 has type 'unsigned int' [-Wformat]
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: David Sterba <dsterba@suse.cz>
for() is obviously better in these code block, and remove noused
init-value to reduce about 6 bytes binary size.
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.cz>
Signed-off-by: David Sterba <dsterba@suse.cz>
There functions include unused chunk_tree argument from the begining,
it is time to remove them and clean up relative code to prepare value
of this argument in caller.
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
int alloc_chunk is never used in this function, remove it.
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
There are some op tables that can be easily made const, similarly the
sysfs feature and raid tables. This is motivated by PaX CONSTIFY plugin.
Signed-off-by: David Sterba <dsterba@suse.cz>
A new helper kvfree() in mm/utils.c will do this.
Signed-off-by: Wang Shilong <wangshilong1991@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
This is the 3rd independent patch of a larger project to cleanup btrfs's
internal usage of btrfs_root. Many functions take btrfs_root only to
grab the fs_info struct.
By requiring a root these functions cause programmer overhead. That
these functions can accept any valid root is not obvious until
inspection.
This patch reduces the specificity of such functions to accept the
fs_info directly.
These patches can be applied independently and thus are not being
submitted as a patch series. There should be about 26 patches by the
project's completion. Each patch will cleanup between 1 and 34 functions
apiece. Each patch covers a single file's functions.
This patch affects the following function(s):
1) csum_tree_block
2) csum_dirty_buffer
3) check_tree_block_fsid
4) btrfs_find_tree_block
5) clean_tree_block
Signed-off-by: Daniel Dressler <danieru.dressler@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
This is the second independent patch of a larger project to cleanup
btrfs's internal usage of btrfs_root. Many functions take btrfs_root
only to grab the fs_info struct.
By requiring a root these functions cause programmer overhead. That
these functions can accept any valid root is not obvious until
inspection.
This patch reduces the specificity of such functions to accept the
fs_info directly.
These patches can be applied independently and thus are not being
submitted as a patch series. There should be about 26 patches by the
project's completion. Each patch will cleanup between 1 and 34 functions
apiece. Each patch covers a single file's functions.
This patch affects the following function(s):
1) btrfs_wq_run_delayed_node
Signed-off-by: Daniel Dressler <danieru.dressler@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
This patch is part of a larger project to cleanup btrfs's internal usage
of struct btrfs_root. Many functions take btrfs_root only to grab a
pointer to fs_info.
This causes programmers to ponder which root can be passed. Since only
the fs_info is read affected functions can accept any root, except this
is only obvious upon inspection.
This patch reduces the specificty of such functions to accept the
fs_info directly.
This patch does not address the two functions in ctree.c (insert_ptr,
and split_item) which only use root for BUG_ONs in ctree.c
This patch affects the following functions:
1) fixup_low_keys
2) btrfs_set_item_key_safe
Signed-off-by: Daniel Dressler <danieru.dressler@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
If we are recording in the tree log that an inode has new names (new hard
links were added), we would drop items, belonging to the inode, that we
shouldn't:
1) When the flag BTRFS_INODE_COPY_EVERYTHING is set in the inode's runtime
flags, we ended up dropping all the extent and xattr items that were
previously logged. This was done only in memory, since logging a new
name doesn't imply syncing the log;
2) When the flag BTRFS_INODE_COPY_EVERYTHING is set in the inode's runtime
flags, we ended up dropping all the xattr items that were previously
logged. Like the case before, this was done only in memory because
logging a new name doesn't imply syncing the log.
This led to some surprises in scenarios such as the following:
1) write some extents to an inode;
2) fsync the inode;
3) truncate the inode or delete/modify some of its xattrs
4) add a new hard link for that inode
5) fsync some other file, to force the log tree to be durably persisted
6) power failure happens
The next time the fs is mounted, the fsync log replay code is executed,
and the resulting file doesn't have the content it had when the last fsync
against it was performed, instead if has a content matching what it had
when the last transaction commit happened.
So change the behaviour such that when a new name is logged, only the inode
item and reference items are processed.
This is easy to reproduce with the test I just made for xfstests, whose
main body is:
_scratch_mkfs >> $seqres.full 2>&1
_init_flakey
_mount_flakey
# Create our test file with some data.
$XFS_IO_PROG -f -c "pwrite -S 0xaa -b 8K 0 8K" \
$SCRATCH_MNT/foo | _filter_xfs_io
# Make sure the file is durably persisted.
sync
# Append some data to our file, to increase its size.
$XFS_IO_PROG -f -c "pwrite -S 0xcc -b 4K 8K 4K" \
$SCRATCH_MNT/foo | _filter_xfs_io
# Fsync the file, so from this point on if a crash/power failure happens, our
# new data is guaranteed to be there next time the fs is mounted.
$XFS_IO_PROG -c "fsync" $SCRATCH_MNT/foo
# Now shrink our file to 5000 bytes.
$XFS_IO_PROG -c "truncate 5000" $SCRATCH_MNT/foo
# Now do an expanding truncate to a size larger than what we had when we last
# fsync'ed our file. This is just to verify that after power failure and
# replaying the fsync log, our file matches what it was when we last fsync'ed
# it - 12Kb size, first 8Kb of data had a value of 0xaa and the last 4Kb of
# data had a value of 0xcc.
$XFS_IO_PROG -c "truncate 32K" $SCRATCH_MNT/foo
# Add one hard link to our file. This made btrfs drop all of our file's
# metadata from the fsync log, including the metadata relative to the
# extent we just wrote and fsync'ed. This change was made only to the fsync
# log in memory, so adding the hard link alone doesn't change the persisted
# fsync log. This happened because the previous truncates set the runtime
# flag BTRFS_INODE_NEEDS_FULL_SYNC in the btrfs inode structure.
ln $SCRATCH_MNT/foo $SCRATCH_MNT/foo_link
# Now make sure the in memory fsync log is durably persisted.
# Creating and fsync'ing another file will do it.
# After this our persisted fsync log will no longer have metadata for our file
# foo that points to the extent we wrote and fsync'ed before.
touch $SCRATCH_MNT/bar
$XFS_IO_PROG -c "fsync" $SCRATCH_MNT/bar
# As expected, before the crash/power failure, we should be able to see a file
# with a size of 32Kb, with its first 5000 bytes having the value 0xaa and all
# the remaining bytes with value 0x00.
echo "File content before:"
od -t x1 $SCRATCH_MNT/foo
# Simulate a crash/power loss.
_load_flakey_table $FLAKEY_DROP_WRITES
_unmount_flakey
_load_flakey_table $FLAKEY_ALLOW_WRITES
_mount_flakey
# After mounting the fs again, the fsync log was replayed.
# The expected result is to see a file with a size of 12Kb, with its first 8Kb
# of data having the value 0xaa and its last 4Kb of data having a value of 0xcc.
# The btrfs bug used to leave the file as it used te be as of the last
# transaction commit - that is, with a size of 8Kb with all bytes having a
# value of 0xaa.
echo "File content after:"
od -t x1 $SCRATCH_MNT/foo
The test case for xfstests follows soon.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
We have a scenario where after the fsync log replay we can lose file data
that had been previously fsync'ed if we added an hard link for our inode
and after that we sync'ed the fsync log (for example by fsync'ing some
other file or directory).
This is because when adding an hard link we updated the inode item in the
log tree with an i_size value of 0. At that point the new inode item was
in memory only and a subsequent fsync log replay would not make us lose
the file data. However if after adding the hard link we sync the log tree
to disk, by fsync'ing some other file or directory for example, we ended
up losing the file data after log replay, because the inode item in the
persisted log tree had an an i_size of zero.
This is easy to reproduce, and the following excerpt from my test for
xfstests shows this:
_scratch_mkfs >> $seqres.full 2>&1
_init_flakey
_mount_flakey
# Create one file with data and fsync it.
# This made the btrfs fsync log persist the data and the inode metadata with
# a correct inode->i_size (4096 bytes).
$XFS_IO_PROG -f -c "pwrite -S 0xaa -b 4K 0 4K" -c "fsync" \
$SCRATCH_MNT/foo | _filter_xfs_io
# Now add one hard link to our file. This made the btrfs code update the fsync
# log, in memory only, with an inode metadata having a size of 0.
ln $SCRATCH_MNT/foo $SCRATCH_MNT/foo_link
# Now force persistence of the fsync log to disk, for example, by fsyncing some
# other file.
touch $SCRATCH_MNT/bar
$XFS_IO_PROG -c "fsync" $SCRATCH_MNT/bar
# Before a power loss or crash, we could read the 4Kb of data from our file as
# expected.
echo "File content before:"
od -t x1 $SCRATCH_MNT/foo
# Simulate a crash/power loss.
_load_flakey_table $FLAKEY_DROP_WRITES
_unmount_flakey
_load_flakey_table $FLAKEY_ALLOW_WRITES
_mount_flakey
# After the fsync log replay, because the fsync log had a value of 0 for our
# inode's i_size, we couldn't read anymore the 4Kb of data that we previously
# wrote and fsync'ed. The size of the file became 0 after the fsync log replay.
echo "File content after:"
od -t x1 $SCRATCH_MNT/foo
Another alternative test, that doesn't need to fsync an inode in the same
transaction it was created, is:
_scratch_mkfs >> $seqres.full 2>&1
_init_flakey
_mount_flakey
# Create our test file with some data.
$XFS_IO_PROG -f -c "pwrite -S 0xaa -b 8K 0 8K" \
$SCRATCH_MNT/foo | _filter_xfs_io
# Make sure the file is durably persisted.
sync
# Append some data to our file, to increase its size.
$XFS_IO_PROG -f -c "pwrite -S 0xcc -b 4K 8K 4K" \
$SCRATCH_MNT/foo | _filter_xfs_io
# Fsync the file, so from this point on if a crash/power failure happens, our
# new data is guaranteed to be there next time the fs is mounted.
$XFS_IO_PROG -c "fsync" $SCRATCH_MNT/foo
# Add one hard link to our file. This made btrfs write into the in memory fsync
# log a special inode with generation 0 and an i_size of 0 too. Note that this
# didn't update the inode in the fsync log on disk.
ln $SCRATCH_MNT/foo $SCRATCH_MNT/foo_link
# Now make sure the in memory fsync log is durably persisted.
# Creating and fsync'ing another file will do it.
touch $SCRATCH_MNT/bar
$XFS_IO_PROG -c "fsync" $SCRATCH_MNT/bar
# As expected, before the crash/power failure, we should be able to read the
# 12Kb of file data.
echo "File content before:"
od -t x1 $SCRATCH_MNT/foo
# Simulate a crash/power loss.
_load_flakey_table $FLAKEY_DROP_WRITES
_unmount_flakey
_load_flakey_table $FLAKEY_ALLOW_WRITES
_mount_flakey
# After mounting the fs again, the fsync log was replayed.
# The btrfs fsync log replay code didn't update the i_size of the persisted
# inode because the inode item in the log had a special generation with a
# value of 0 (and it couldn't know the correct i_size, since that inode item
# had a 0 i_size too). This made the last 4Kb of file data inaccessible and
# effectively lost.
echo "File content after:"
od -t x1 $SCRATCH_MNT/foo
This isn't a new issue/regression. This problem has been around since the
log tree code was added in 2008:
Btrfs: Add a write ahead tree log to optimize synchronous operations
(commit e02119d5a7)
Test cases for xfstests follow soon.
CC: <stable@vger.kernel.org>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
On our gluster boxes we stream large tar balls of backups onto our fses. With
160gb of ram this means we get really large contiguous ranges of dirty data, but
the way our ENOSPC stuff works is that as long as it's contiguous we only hold
metadata reservation for one extent. The problem is we limit our extents to
128mb, so we'll end up with at least 800 extents so our enospc accounting is
quite a bit lower than what we need. To keep track of this make sure we
increase outstanding_extents for every multiple of the max extent size so we can
be sure to have enough reserved metadata space. Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
We do this to get the space accounting, but this is just needless churn on the
io_tree, so just drop setting/clearing delalloc and just drop the reserved data
space when we have a successfull allocation. Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Chris Mason <clm@fb.com>
We have this weird dance where we always inc outstanding_extents when we do a
O_DIRECT write, even if we allocate the entire range. To get around this we
also drop the metadata space if we successfully write. This is an unnecessary
dance, we only need to jack up outstanding_extents if we don't satisfy the
entire range request in get_blocks_direct, otherwise we are good using our
original reservation. So drop the unconditional inc and the drop of the
metadata space that we have for the unconditional inc. Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Chris Mason <clm@fb.com>
Btrfs will report NO_SPACE when we create and remove files for several times,
and we can't write to filesystem until mount it again.
Steps to reproduce:
1: Create a single-dev btrfs fs with default option
2: Write a file into it to take up most fs space
3: Delete above file
4: Wait about 100s to let chunk removed
5: goto 2
Script is like following:
#!/bin/bash
# Recommend 1.2G space, too large disk will make test slow
DEV="/dev/sda16"
MNT="/mnt/tmp"
dev_size="$(lsblk -bn -o SIZE "$DEV")" || exit 2
file_size_m=$((dev_size * 75 / 100 / 1024 / 1024))
echo "Loop write ${file_size_m}M file on $((dev_size / 1024 / 1024))M dev"
for ((i = 0; i < 10; i++)); do umount "$MNT" 2>/dev/null; done
echo "mkfs $DEV"
mkfs.btrfs -f "$DEV" >/dev/null || exit 2
echo "mount $DEV $MNT"
mount "$DEV" "$MNT" || exit 2
for ((loop_i = 0; loop_i < 20; loop_i++)); do
echo
echo "loop $loop_i"
echo "dd file..."
cmd=(dd if=/dev/zero of="$MNT"/file0 bs=1M count="$file_size_m")
"${cmd[@]}" 2>/dev/null || {
# NO_SPACE error triggered
echo "dd failed: ${cmd[*]}"
exit 1
}
echo "rm file..."
rm -f "$MNT"/file0 || exit 2
for ((i = 0; i < 10; i++)); do
df "$MNT" | tail -1
sleep 10
done
done
Reason:
It is triggered by commit: 47ab2a6c68
which is used to remove empty block groups automatically, but the
reason is not in that patch. Code before works well because btrfs
don't need to create and delete chunks so many times with high
complexity.
Above bug is caused by many reason, any of them can trigger it.
Reason1:
When we remove some continuous chunks but leave other chunks after,
these disk space should be used by chunk-recreating, but in current
code, only first create will successed.
Fixed by Forrest Liu <forrestl@synology.com> in:
Btrfs: fix find_free_dev_extent() malfunction in case device tree has hole
Reason2:
contains_pending_extent() return wrong value in calculation.
Fixed by Forrest Liu <forrestl@synology.com> in:
Btrfs: fix find_free_dev_extent() malfunction in case device tree has hole
Reason3:
btrfs_check_data_free_space() try to commit transaction and retry
allocating chunk when the first allocating failed, but space_info->full
is set in first allocating, and prevent second allocating in retry.
Fixed in this patch by clear space_info->full in commit transaction.
Tested for severial times by above script.
Changelog v3->v4:
use light weight int instead of atomic_t to record have_remove_bgs in
transaction, suggested by:
Josef Bacik <jbacik@fb.com>
Changelog v2->v3:
v2 fixed the bug by adding more commit-transaction, but we
only need to reclaim space when we are really have no space for
new chunk, noticed by:
Filipe David Manana <fdmanana@gmail.com>
Actually, our code already have this type of commit-and-retry,
we only need to make it working with removed-bgs.
v3 fixed the bug with above way.
Changelog v1->v2:
v1 will introduce a new bug when delete and create chunk in same disk
space in same transaction, noticed by:
Filipe David Manana <fdmanana@gmail.com>
V2 fix this bug by commit transaction after remove block grops.
Reported-by: Tsutomu Itoh <t-itoh@jp.fujitsu.com>
Suggested-by: Filipe David Manana <fdmanana@gmail.com>
Suggested-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
My previous patch "Btrfs: fix scrub race leading to use-after-free"
introduced the possibility to sleep in an atomic context, which happens
when the scrub_lock mutex is held at the time scrub_pending_bio_dec()
is called - this function can be called under an atomic context.
Chris ran into this in a debug kernel which gave the following trace:
[ 1928.950319] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:621
[ 1928.967334] in_atomic(): 1, irqs_disabled(): 0, pid: 149670, name: fsstress
[ 1928.981324] INFO: lockdep is turned off.
[ 1928.989244] CPU: 24 PID: 149670 Comm: fsstress Tainted: G W 3.19.0-rc7-mason+ #41
[ 1929.006418] Hardware name: ZTSYSTEMS Echo Ridge T4 /A9DRPF-10D, BIOS 1.07 05/10/2012
[ 1929.022207] ffffffff81a22cf8 ffff881076e03b78 ffffffff816b8dd9 ffff881076e03b78
[ 1929.037267] ffff880d8e828710 ffff881076e03ba8 ffffffff810856c4 ffff881076e03bc8
[ 1929.052315] 0000000000000000 000000000000026d ffffffff81a22cf8 ffff881076e03bd8
[ 1929.067381] Call Trace:
[ 1929.072344] <IRQ> [<ffffffff816b8dd9>] dump_stack+0x4f/0x6e
[ 1929.083968] [<ffffffff810856c4>] ___might_sleep+0x174/0x230
[ 1929.095352] [<ffffffff810857d2>] __might_sleep+0x52/0x90
[ 1929.106223] [<ffffffff816bb68f>] mutex_lock_nested+0x2f/0x3b0
[ 1929.117951] [<ffffffff810ab37d>] ? trace_hardirqs_on+0xd/0x10
[ 1929.129708] [<ffffffffa05dc838>] scrub_pending_bio_dec+0x38/0x70 [btrfs]
[ 1929.143370] [<ffffffffa05dd0e0>] scrub_parity_bio_endio+0x50/0x70 [btrfs]
[ 1929.157191] [<ffffffff812fa603>] bio_endio+0x53/0xa0
[ 1929.167382] [<ffffffffa05f96bc>] rbio_orig_end_io+0x7c/0xa0 [btrfs]
[ 1929.180161] [<ffffffffa05f97ba>] raid_write_parity_end_io+0x5a/0x80 [btrfs]
[ 1929.194318] [<ffffffff812fa603>] bio_endio+0x53/0xa0
[ 1929.204496] [<ffffffff8130401b>] blk_update_request+0x1eb/0x450
[ 1929.216569] [<ffffffff81096e58>] ? trigger_load_balance+0x78/0x500
[ 1929.229176] [<ffffffff8144c74d>] scsi_end_request+0x3d/0x1f0
[ 1929.240740] [<ffffffff8144ccac>] scsi_io_completion+0xac/0x5b0
[ 1929.252654] [<ffffffff81441c50>] scsi_finish_command+0xf0/0x150
[ 1929.264725] [<ffffffff8144d317>] scsi_softirq_done+0x147/0x170
[ 1929.276635] [<ffffffff8130ace6>] blk_done_softirq+0x86/0xa0
[ 1929.288014] [<ffffffff8105d92e>] __do_softirq+0xde/0x600
[ 1929.298885] [<ffffffff8105df6d>] irq_exit+0xbd/0xd0
(...)
Fix this by using a reference count on the scrub context structure
instead of locking the scrub_lock mutex.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
Pull backing device changes from Jens Axboe:
"This contains a cleanup of how the backing device is handled, in
preparation for a rework of the life time rules. In this part, the
most important change is to split the unrelated nommu mmap flags from
it, but also removing a backing_dev_info pointer from the
address_space (and inode), and a cleanup of other various minor bits.
Christoph did all the work here, I just fixed an oops with pages that
have a swap backing. Arnd fixed a missing export, and Oleg killed the
lustre backing_dev_info from staging. Last patch was from Al,
unexporting parts that are now no longer needed outside"
* 'for-3.20/bdi' of git://git.kernel.dk/linux-block:
Make super_blocks and sb_lock static
mtd: export new mtd_mmap_capabilities
fs: make inode_to_bdi() handle NULL inode
staging/lustre/llite: get rid of backing_dev_info
fs: remove default_backing_dev_info
fs: don't reassign dirty inodes to default_backing_dev_info
nfs: don't call bdi_unregister
ceph: remove call to bdi_unregister
fs: remove mapping->backing_dev_info
fs: export inode_to_bdi and use it in favor of mapping->backing_dev_info
nilfs2: set up s_bdi like the generic mount_bdev code
block_dev: get bdev inode bdi directly from the block device
block_dev: only write bdev inode on close
fs: introduce f_op->mmap_capabilities for nommu mmap support
fs: kill BDI_CAP_SWAP_BACKED
fs: deduplicate noop_backing_dev_info
Helper account_page_redirty() fixes dirty pages counter for redirtied
pages. This patch puts it after dirtying and prevents temporary
underflows of dirtied pages counters on zone/bdi and current->nr_dirtied.
Signed-off-by: Konstantin Khebnikov <khlebnikov@yandex-team.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull RCU updates from Ingo Molnar:
"The main RCU changes in this cycle are:
- Documentation updates.
- Miscellaneous fixes.
- Preemptible-RCU fixes, including fixing an old bug in the
interaction of RCU priority boosting and CPU hotplug.
- SRCU updates.
- RCU CPU stall-warning updates.
- RCU torture-test updates"
* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (54 commits)
rcu: Initialize tiny RCU stall-warning timeouts at boot
rcu: Fix RCU CPU stall detection in tiny implementation
rcu: Add GP-kthread-starvation checks to CPU stall warnings
rcu: Make cond_resched_rcu_qs() apply to normal RCU flavors
rcu: Optionally run grace-period kthreads at real-time priority
ksoftirqd: Use new cond_resched_rcu_qs() function
ksoftirqd: Enable IRQs and call cond_resched() before poking RCU
rcutorture: Add more diagnostics in rcu_barrier() test failure case
torture: Flag console.log file to prevent holdovers from earlier runs
torture: Add "-enable-kvm -soundhw pcspk" to qemu command line
rcutorture: Handle different mpstat versions
rcutorture: Check from beginning to end of grace period
rcu: Remove redundant rcu_batches_completed() declaration
rcutorture: Drop rcu_torture_completed() and friends
rcu: Provide rcu_batches_completed_sched() for TINY_RCU
rcutorture: Use unsigned for Reader Batch computations
rcutorture: Make build-output parsing correctly flag RCU's warnings
rcu: Make _batches_completed() functions return unsigned long
rcutorture: Issue warnings on close calls due to Reader Batch blows
documentation: Fix smp typo in memory-barriers.txt
...
Pull btrfs fix from Chris Mason:
"Forrest Liu tracked down a missing blk_finish_plug in the btrfs
logging code. This isn't a new bug, and it's hard to hit. But, it's
safe enough for inclusion now, and in my for-linus branch"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
Btrfs: add missing blk_finish_plug in btrfs_sync_log()
Add missing blk_finish_plug in btrfs_sync_log()
Signed-off-by: Forrest Liu <forrestl@synology.com>
Reviewed-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
o removed an unecessary INIT_LIST_HEAD after LIST_HEAD
o merge a declare & INIT_LIST_HEAD pair into one LIST_HEAD
Signed-off-by: Gui Hecheng <guihc.fnst@cn.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
Below test will fail currently:
mkfs.ext4 -F /dev/sda
btrfs-convert /dev/sda
mount /dev/sda /mnt
btrfs device add -f /dev/sdb /mnt
btrfs balance start -v -dconvert=raid1 -mconvert=raid1 /mnt
The reason is there are some block groups with usage 0, but the whole
disk hasn't free space to allocate new chunk, so we even can't set such
block group readonly. This patch deletes the chunk allocation when
setting block group ro. For META, we already have reserve. But for
SYSTEM, we don't have, so the check_system_chunk is still required.
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
Verify that the sys_array has enough bytes to read the next item.
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
There's a pointer to buffer, integer offset and offset passed as
pointer, try to find matching names for them.
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
Verify that possible minimum and maximum size is set, validity of
contents is checked in btrfs_read_sys_array.
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
I received a few crafted images from Jiri, all got through the recently
added superblock checks. The lower bounds checks for num_devices and
sector/node -sizes were missing and caused a crash during mount.
Tools for symbolic code execution were used to prepare the images
contents.
Reported-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
This patch adds a new member to the 'struct btrfs_inode' structure to hold
the file creation time.
Signed-off-by: chandan <chandanrmail@gmail.com>
[refreshed, removed btrfs_inode_otime]
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
Pull btrfs fix from Chris Mason:
"We have one more fix for btrfs in my for-linus branch - this was a bug
in the new raid5/6 scrubbing support"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
btrfs: fix raid56 scrub failed in xfstests btrfs/072
The xfstests btrfs/072 reports uncorrectable read errors in dmesg,
because scrub forgets to use commit_root for parity scrub routine
and scrub attempts to scrub those extents items whose contents are
not fully on disk.
To fix it, we just add the @search_commit_root flag back.
Signed-off-by: Gui Hecheng <guihc.fnst@cn.fujitsu.com>
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Reviewed-by: Miao Xie <miaoxie@huawei.com>
Signed-off-by: Chris Mason <clm@fb.com>
Pull btrfs fixes from Chris Mason:
"We have a few fixes in my for-linus branch.
Qu Wenruo's batch fix a regression between some our merge window pull
and the inode_cache feature. The rest are smaller bugs"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
btrfs: Don't call btrfs_start_transaction() on frozen fs to avoid deadlock.
btrfs: Fix the bug that fs_info->pending_changes is never cleared.
btrfs: fix state->private cast on 32 bit machines
Btrfs: fix race deleting block group from space_info->ro_bgs list
Btrfs: fix incorrect freeing in scrub_stripe
btrfs: sync ioctl, handle errors after transaction start
btrfs_alloc_tree_block() returns an extent buffer on which a blocked lock has
been taken. Hence assign the appropriate value to path->locks[level].
Signed-off-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Signed-off-by: Chris Mason <clm@fb.com>
There isn't any real use of following members of struct btrfs_root
so delete them.
struct kobject root_kobj;
struct completion kobj_unregister;
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
In function qgroup_excl_accounting(), we need to WARN when
qg->excl is less than what we want to free, same to child
and parents. But currently, for parent qgroup, the WARN_ON()
is located after freeing qg->excl. It will WARN out even we
free it normally.
This patch move this WARN_ON() before freeing qg->excl.
Signed-off-by: Dongsheng Yang <yangds.fnst@cn.fujitsu.com>
Reviewed-by: Satoru Takeuchi <takeuchi_satoru@jp.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
"run_most" is not used anymore.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: Satoru Takeuchi <takeuchi_satoru@jp.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
refs is better than ref_count to record a struct's ref count.
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Suggested-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
So we can check raid56 with:
(map->type & BTRFS_BLOCK_GROUP_RAID56_MASK)
instead of long:
(map->type & (BTRFS_BLOCK_GROUP_RAID5 | BTRFS_BLOCK_GROUP_RAID6))
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
Corrent code use many kinds of "clever" way to determine operation
target's raid type, as:
raid_map != NULL
or
raid_map[MAX_NR] == RAID[56]_Q_STRIPE
To make code easy to maintenance, this patch put raid type into
bbio, and we can always get raid type from bbio with a "stupid"
way.
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
scrub_setup_recheck_block() have many arguments but most of them
can be get from one of them, we can remove them to make code clean.
Some other cleanup for that function also included in this patch.
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
The code are similar, combine them to make code clean and easy to maintenance.
Some lost condition are also completed with benefit of this combination.
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
In corrent code, code of finding-right-mirror and writing-to-target
are mixed in logic, if we find a right mirror but failed in writing
to target, it will treat as "hadn't found right block", and fill the
target with sblock_bad.
Actually, "failed in writing to target" does not mean "source
block is wrong", this patch separate above two condition in logic,
and do some cleanup to make code clean.
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
Use break instead of useless loop should be more suitable in this
case.
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
1: Remove no-need DEFINE_WAIT(wait)
2: Add likely() for BTRFS_FS_STATE_DEV_REPLACING condition
3: Use while loop instead of goto
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
It is always 1 in this place, because !1 case was already jumped
out in previous code.
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
if (sctx->is_dev_replace && !is_metadata && !have_csum) {
...
goto nodatasum_case;
}
...
nodatasum_case:
WARN_ON(sctx->is_dev_replace);
In above code, nodatasum_case marker should be moved after
WARN_ON().
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
1: ref_count is simple than current RBIO_HOLD_BBIO_MAP_BIT flag
to keep btrfs_bio's memory in raid56 recovery implement.
2: free function for bbio will make code clean and flexible, plus
forced data type checking in compile.
Changelog v1->v2:
Rename following by David Sterba's suggestion:
put_btrfs_bio() -> btrfs_put_bio()
get_btrfs_bio() -> btrfs_get_bio()
bbio->ref_count -> bbio->refs
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
It can make code more simple and clear, we need not care about
free bbio and raid_map together.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
It can avoid complex calculation of real stripes in sort,
moreover, we can clean up code of sorting tgtdev_map because it
will be in order initially.
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
We add the number of stripes on target devices into bbio->num_stripes
if we are under device replacement, and we just sort the raid_map of
those stripes that not on the target devices, so if when we need
real raid_map, we need skip the stripes on the target devices.
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
If we have an inode with a large number of hard links, some of which may
be extrefs, turn a regular ref into an extref, fsync the inode and then
replay the fsync log (after a crash/reboot), we can endup with an fsync
log that makes the replay code always fail with -EOVERFLOW when processing
the inode's references.
This is easy to reproduce with the test case I made for xfstests. Its steps
are the following:
_scratch_mkfs "-O extref" >> $seqres.full 2>&1
_init_flakey
_mount_flakey
# Create a test file with 3001 hard links. This number is large enough to
# make btrfs start using extrefs at some point even if the fs has the maximum
# possible leaf/node size (64Kb).
echo "hello world" > $SCRATCH_MNT/foo
for i in `seq 1 3000`; do
ln $SCRATCH_MNT/foo $SCRATCH_MNT/foo_link_`printf "%04d" $i`
done
# Make sure all metadata and data are durably persisted.
sync
# Now remove one link, add a new one with a new name, add another new one with
# the same name as the one we just removed and fsync the inode.
rm -f $SCRATCH_MNT/foo_link_0001
ln $SCRATCH_MNT/foo $SCRATCH_MNT/foo_link_3001
ln $SCRATCH_MNT/foo $SCRATCH_MNT/foo_link_0001
rm -f $SCRATCH_MNT/foo_link_0002
ln $SCRATCH_MNT/foo $SCRATCH_MNT/foo_link_3002
ln $SCRATCH_MNT/foo $SCRATCH_MNT/foo_link_3003
$XFS_IO_PROG -c "fsync" $SCRATCH_MNT/foo
# Simulate a crash/power loss. This makes sure the next mount
# will see an fsync log and will replay that log.
_load_flakey_table $FLAKEY_DROP_WRITES
_unmount_flakey
_load_flakey_table $FLAKEY_ALLOW_WRITES
_mount_flakey
# Check that the number of hard links is correct, we are able to remove all
# the hard links and read the file's data. This is just to verify we don't
# get stale file handle errors (due to dangling directory index entries that
# point to inodes that no longer exist).
echo "Link count: $(stat --format=%h $SCRATCH_MNT/foo)"
[ -f $SCRATCH_MNT/foo ] || echo "Link foo is missing"
for ((i = 1; i <= 3003; i++)); do
name=foo_link_`printf "%04d" $i`
if [ $i -eq 2 ]; then
[ -f $SCRATCH_MNT/$name ] && echo "Link $name found"
else
[ -f $SCRATCH_MNT/$name ] || echo "Link $name is missing"
fi
done
rm -f $SCRATCH_MNT/foo_link_*
cat $SCRATCH_MNT/foo
rm -f $SCRATCH_MNT/foo
status=0
exit
The fix is simply to correct the overflow condition when overwriting a
reference item because it was wrong, trying to increase the item in the
fs/subvol tree by an impossible amount. Also ensure that we don't insert
one normal ref and one ext ref for the same dentry - this happened because
processing a dir index entry from the parent in the log happened when
the normal ref item was full, which made the logic insert an extref and
later when the normal ref had enough room, it would be inserted again
when processing the ref item from the child inode in the log.
This issue has been present since the introduction of the extrefs feature
(2012).
A test case for xfstests follows soon. This test only passes if the previous
patch titled "Btrfs: fix fsync when extend references are added to an inode"
is applied too.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
If we added an extended reference to an inode and fsync'ed it, the log
replay code would make our inode have an incorrect link count, which
was lower then the expected/correct count.
This resulted in stale directory index entries after deleting some of
the hard links, and any access to the dangling directory entries resulted
in -ESTALE errors because the entries pointed to inode items that don't
exist anymore.
This is easy to reproduce with the test case I made for xfstests, and
the bulk of that test is:
_scratch_mkfs "-O extref" >> $seqres.full 2>&1
_init_flakey
_mount_flakey
# Create a test file with 3001 hard links. This number is large enough to
# make btrfs start using extrefs at some point even if the fs has the maximum
# possible leaf/node size (64Kb).
echo "hello world" > $SCRATCH_MNT/foo
for i in `seq 1 3000`; do
ln $SCRATCH_MNT/foo $SCRATCH_MNT/foo_link_`printf "%04d" $i`
done
# Make sure all metadata and data are durably persisted.
sync
# Add one more link to the inode that ends up being a btrfs extref and fsync
# the inode.
ln $SCRATCH_MNT/foo $SCRATCH_MNT/foo_link_3001
$XFS_IO_PROG -c "fsync" $SCRATCH_MNT/foo
# Simulate a crash/power loss. This makes sure the next mount
# will see an fsync log and will replay that log.
_load_flakey_table $FLAKEY_DROP_WRITES
_unmount_flakey
_load_flakey_table $FLAKEY_ALLOW_WRITES
_mount_flakey
# Now after the fsync log replay btrfs left our inode with a wrong link count N,
# which was smaller than the correct link count M (N < M).
# So after removing N hard links, the remaining M - N directory entries were
# still visible to user space but it was impossible to do anything with them
# because they pointed to an inode that didn't exist anymore. This resulted in
# stale file handle errors (-ESTALE) when accessing those dentries for example.
#
# So remove all hard links except the first one and then attempt to read the
# file, to verify we don't get an -ESTALE error when accessing the inodel
#
# The btrfs fsck tool also detected the incorrect inode link count and it
# reported an error message like the following:
#
# root 5 inode 257 errors 2001, no inode item, link count wrong
# unresolved ref dir 256 index 2978 namelen 13 name foo_link_2976 filetype 1 errors 4, no inode ref
#
# The fstests framework automatically calls fsck after a test is run, so we
# don't need to call fsck explicitly here.
rm -f $SCRATCH_MNT/foo_link_*
cat $SCRATCH_MNT/foo
status=0
exit
So make sure an fsync always flushes the delayed inode item, so that the
fsync log contains it (needed in order to trigger the link count fixup
code) and fix the extref counting function, which always return -ENOENT
to its caller (and made it assume there were always 0 extrefs).
This issue has been present since the introduction of the extrefs feature
(2012).
A test case for xfstests follows soon.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
If we have an inode (file) with a link count greater than 1, remove
one of its hard links, fsync the inode, power fail/crash and then
replay the fsync log on the next mount, we end up getting the parent
directory's metadata inconsistent - its i_size still reflects the
deleted hard link and has dangling index entries (with no matching
inode reference entries). This prevents the directory from ever being
deletable, as its i_size can never decrease to BTRFS_EMPTY_DIR_SIZE
even if all of its children inodes are deleted, and the dangling index
entries can never be removed (as they point to an inode that does not
exist anymore).
This is easy to reproduce with the following excerpt from the test case
for xfstests that I just made:
_scratch_mkfs >> $seqres.full 2>&1
_init_flakey
_mount_flakey
# Create a test file with 2 hard links in the same directory.
mkdir -p $SCRATCH_MNT/a/b
echo "hello world" > $SCRATCH_MNT/a/b/foo
ln $SCRATCH_MNT/a/b/foo $SCRATCH_MNT/a/b/bar
# Make sure all metadata and data are durably persisted.
sync
# Now remove one of the hard links and fsync the inode.
rm -f $SCRATCH_MNT/a/b/bar
$XFS_IO_PROG -c "fsync" $SCRATCH_MNT/a/b/foo
# Simulate a crash/power loss. This makes sure the next mount
# will see an fsync log and will replay that log.
_load_flakey_table $FLAKEY_DROP_WRITES
_unmount_flakey
_load_flakey_table $FLAKEY_ALLOW_WRITES
_mount_flakey
# Remove the last hard link of the file and attempt to remove its parent
# directory - this failed in btrfs because the fsync log and replay code
# didn't decrement the parent directory's i_size and left dangling directory
# index entries - this made the btrfs rmdir implementation always fail with
# the error -ENOTEMPTY.
#
# The dangling directory index entries were visible to user space, but it was
# impossible to do anything on them (unlink, open, read, write, stat, etc)
# because the inode they pointed to did not exist anymore.
#
# The parent directory's metadata inconsistency (stale index entries) was
# also detected by btrfs' fsck tool, which is run automatically by the fstests
# framework when the test finishes. The error message reported by fsck was:
#
# root 5 inode 259 errors 2001, no inode item, link count wrong
# unresolved ref dir 258 index 3 namelen 3 name bar filetype 1 errors 4, no inode ref
#
rm -f $SCRATCH_MNT/a/b/*
rmdir $SCRATCH_MNT/a/b
rmdir $SCRATCH_MNT/a
To fix this just make sure that after an unlink, if the inode is fsync'ed,
he parent inode is fully logged in the fsync log.
A test case for xfstests follows soon.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
Very often our extent buffer's header generation doesn't match the current
transaction's id or it is also referenced by other trees (snapshots), so
we don't need the corresponding block group cache object. Therefore only
search for it if we are going to use it, so we avoid an unnecessary search
in the block groups rbtree (and acquiring and releasing its spinlock).
Freeing a tree block is performed when COWing or deleting a node/leaf,
which implies we are holding the node/leaf's parent node lock, therefore
reducing the amount of time spent when freeing a tree block helps reducing
the amount of time we are holding the parent node's lock.
For example, for a run of xfstests/generic/083, the block group cache
object was needed only 682 times for a total of 226691 calls to free
a tree block.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
Currently there's a 4B hole in the structure between refs and state and there
are only 16 bits used so we can make it unsigned. This will get a better
packing and may save some stack space for local variables.
The size of extent_state gets reduced by 8B and there are usually a lot
of slab objects.
struct extent_state {
u64 start; /* 0 8 */
u64 end; /* 8 8 */
struct rb_node rb_node; /* 16 24 */
wait_queue_head_t wq; /* 40 24 */
/* --- cacheline 1 boundary (64 bytes) --- */
atomic_t refs; /* 64 4 */
/* XXX 4 bytes hole, try to pack */
long unsigned int state; /* 72 8 */
u64 private; /* 80 8 */
/* size: 88, cachelines: 2, members: 7 */
/* sum members: 84, holes: 1, sum holes: 4 */
/* last cacheline: 24 bytes */
};
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
This has been confusing people for too long, the message is really just
informative.
CC: <stable@vger.kernel.org> # 3.10+
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
The errors are worth noting and might get missed with INFO level.
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
All error conditions from open_ctree shall be ERR. Warning would
suggest that something's wrong and we can continue.
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
Several messages that point to some internal problem, level INFO is
wrong here.
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
We were incorrectly detecting when the target key didn't exist anymore
after releasing the path and re-searching the tree. This could make
us split or duplicate (btrfs_split_item() and btrfs_duplicate_item()
are its only callers at the moment) an item when we should not.
For the case of duplicating an item, we currently only duplicate
checksum items (csum tree) and file extent items (fs/subvol trees).
For the checksum items we end up overriding the item completely,
but for file extent items we update only some of their fields in
the copy (done in __btrfs_drop_extents), which means we can end up
having a logical corruption for some values.
Also for the case where we duplicate a file extent item it will make
us produce a leaf with a wrong key order, as btrfs_duplicate_item()
advances us to the next slot and then its caller sets a smaller key
on the new item at that slot (like in __btrfs_drop_extents() e.g.).
Alternatively if the tree search in setup_leaf_for_split() leaves
with path->slots[0] == btrfs_header_nritems(path->nodes[0]), we end
up accessing beyond the leaf's end (when we check if the item's size
has changed) and make our caller insert an item at the invalid slot
btrfs_header_nritems(path->nodes[0]) + 1, causing an invalid memory
access if the leaf is full or nearly full.
This issue has been present since the introduction of this function
in 2009:
Btrfs: Add btrfs_duplicate_item
commit ad48fd7546
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
Currently any time we try to update the block groups on disk we will walk _all_
block groups and check for the ->dirty flag to see if it is set. This function
can get called several times during a commit. So if you have several terabytes
of data you will be a very sad panda as we will loop through _all_ of the block
groups several times, which makes the commit take a while which slows down the
rest of the file system operations.
This patch introduces a dirty list for the block groups that we get added to
when we dirty the block group for the first time. Then we simply update any
block groups that have been dirtied since the last time we called
btrfs_write_dirty_block_groups. This allows us to clean up how we write the
free space cache out so it is much cleaner. Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
I've been overloading root->dirty_list to keep track of dirty roots and which
roots need to have their commit roots switched at transaction commit time. This
could cause us to lose an update to the root which could corrupt the file
system. To fix this use a state bit to know if the root is dirty, and if it
isn't set we go ahead and move the root to the dirty list. This way if we
re-dirty the root after adding it to the switch_commit list we make sure to
update it. This also makes it so that the extent root is always the last root
on the dirty list to try and keep the amount of churn down at this point in the
commit. Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
Pull RCU updates from Paul E. McKenney:
- Documentation updates.
- Miscellaneous fixes.
- Preemptible-RCU fixes, including fixing an old bug in the
interaction of RCU priority boosting and CPU hotplug.
- SRCU updates.
- RCU CPU stall-warning updates.
- RCU torture-test updates.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Commit 6b5fe46dfa (btrfs: do commit in sync_fs if there are pending
changes) will call btrfs_start_transaction() in sync_fs(), to handle
some operations needed to be done in next transaction.
However this can cause deadlock if the filesystem is frozen, with the
following sys_r+w output:
[ 143.255932] Call Trace:
[ 143.255936] [<ffffffff816c0e09>] schedule+0x29/0x70
[ 143.255939] [<ffffffff811cb7f3>] __sb_start_write+0xb3/0x100
[ 143.255971] [<ffffffffa040ec06>] start_transaction+0x2e6/0x5a0
[btrfs]
[ 143.255992] [<ffffffffa040f1eb>] btrfs_start_transaction+0x1b/0x20
[btrfs]
[ 143.256003] [<ffffffffa03dc0ba>] btrfs_sync_fs+0xca/0xd0 [btrfs]
[ 143.256007] [<ffffffff811f7be0>] sync_fs_one_sb+0x20/0x30
[ 143.256011] [<ffffffff811cbd01>] iterate_supers+0xe1/0xf0
[ 143.256014] [<ffffffff811f7d75>] sys_sync+0x55/0x90
[ 143.256017] [<ffffffff816c49d2>] system_call_fastpath+0x12/0x17
[ 143.256111] Call Trace:
[ 143.256114] [<ffffffff816c0e09>] schedule+0x29/0x70
[ 143.256119] [<ffffffff816c3405>] rwsem_down_write_failed+0x1c5/0x2d0
[ 143.256123] [<ffffffff8133f013>] call_rwsem_down_write_failed+0x13/0x20
[ 143.256131] [<ffffffff811caae8>] thaw_super+0x28/0xc0
[ 143.256135] [<ffffffff811db3e5>] do_vfs_ioctl+0x3f5/0x540
[ 143.256187] [<ffffffff811db5c1>] SyS_ioctl+0x91/0xb0
[ 143.256213] [<ffffffff816c49d2>] system_call_fastpath+0x12/0x17
The reason is like the following:
(Holding s_umount)
VFS sync_fs staff:
|- btrfs_sync_fs()
|- btrfs_start_transaction()
|- sb_start_intwrite()
(Waiting thaw_fs to unfreeze)
VFS thaw_fs staff:
thaw_fs()
(Waiting sync_fs to release
s_umount)
So deadlock happens.
This can be easily triggered by fstest/generic/068 with inode_cache
mount option.
The fix is to check if the fs is frozen, if the fs is frozen, just
return and waiting for the next transaction.
Cc: David Sterba <dsterba@suse.cz>
Reported-by: Gui Hecheng <guihc.fnst@cn.fujitsu.com>
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
[enhanced comment, changed to SB_FREEZE_WRITE]
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
Fs_info->pending_changes is never cleared since the original code uses
cmpxchg(&fs_info->pending_changes, 0, 0), which will only clear it if
pending_changes is already 0.
This will cause a lot of problem when mount it with inode_cache mount
option.
If the btrfs is mounted as inode_cache, pending_changes will always be
1, even when the fs is frozen.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.cz>
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
Now that default_backing_dev_info is not used for writeback purposes we can
git rid of it easily:
- instead of using it's name for tracing unregistered bdi we just use
"unknown"
- btrfs and ceph can just assign the default read ahead window themselves
like several other filesystems already do.
- we can assign noop_backing_dev_info as the default one in alloc_super.
All filesystems already either assigned their own or
noop_backing_dev_info.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@fb.com>
Now that we never use the backing_dev_info pointer in struct address_space
we can simply remove it and save 4 to 8 bytes in every inode.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Reviewed-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@fb.com>
Now that we got rid of the bdi abuse on character devices we can always use
sb->s_bdi to get at the backing_dev_info for a file, except for the block
device special case. Export inode_to_bdi and replace uses of
mapping->backing_dev_info with it to prepare for the removal of
mapping->backing_dev_info.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@fb.com>
Since "BDI: Provide backing device capability information [try #3]" the
backing_dev_info structure also provides flags for the kind of mmap
operation available in a nommu environment, which is entirely unrelated
to it's original purpose.
Introduce a new nommu-only file operation to provide this information to
the nommu mmap code instead. Splitting this from the backing_dev_info
structure allows to remove lots of backing_dev_info instance that aren't
otherwise needed, and entirely gets rid of the concept of providing a
backing_dev_info for a character device. It also removes the need for
the mtd_inodefs filesystem.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Tejun Heo <tj@kernel.org>
Acked-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Suppress the following warning displayed on building 32bit (i686) kernel.
===============================================================================
...
CC [M] fs/btrfs/extent_io.o
fs/btrfs/extent_io.c: In function ‘btrfs_free_io_failure_record’:
fs/btrfs/extent_io.c:2193:13: warning: cast to pointer from integer of
different size [-Wint-to-pointer-cast]
failrec = (struct io_failure_record *)state->private;
...
===============================================================================
Signed-off-by: Satoru Takeuchi <takeuchi_satoru@jp.fujitsu.com>
Reported-by: Chris Murphy <chris@colorremedies.com>
Signed-off-by: Chris Mason <clm@fb.com>
When removing a block group we were deleting it from its space_info's
ro_bgs list without the correct protection - the space info's spinlock.
Fix this by doing the list delete while holding the spinlock of the
corresponding space info, which is the correct lock for any operation
on that list.
This issue was introduced in the 3.19 kernel by the following change:
Btrfs: move read only block groups onto their own list V2
commit 633c0aad4c
I ran into a kernel crash while a task was running statfs, which iterates
the space_info->ro_bgs list while holding the space info's spinlock,
and another task was deleting it from the same list, without holding that
spinlock, as part of the block group remove operation (while running the
function btrfs_remove_block_group). This happened often when running the
stress test xfstests/generic/038 I recently made.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
The address that should be freed is not 'ppath' but 'path'.
Signed-off-by: Tsutomu Itoh <t-itoh@jp.fujitsu.com>
Reviewed-by: Miao Xie <miaoxie@huawei.com>
Signed-off-by: Chris Mason <clm@fb.com>
The version merged to 3.19 did not handle errors from start_trancaction
and could pass an invalid pointer to commit_transaction.
Fixes: 6b5fe46dfa ("btrfs: do commit in sync_fs if there are pending changes")
Reported-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
If the found_key is NULL, then btrfs_find_item becomes a verbose wrapper
for simple btrfs_search_slot.
After we've removed all such callers, passing a NULL key is not valid
anymore.
Signed-off-by: David Sterba <dsterba@suse.cz>
We can search and add the orphan item in one go,
btrfs_insert_orphan_item will find out if the item already exists.
Signed-off-by: David Sterba <dsterba@suse.cz>
If btrfs_find_item is called with NULL path it allocates one locally but
does not free it. Affected paths are inserting an orphan item for a file
and for a subvol root.
Move the path allocation to the callers.
CC: <stable@vger.kernel.org> # 3.14+
Fixes: 3f870c2899 ("btrfs: expand btrfs_find_item() to include find_orphan_item functionality")
Signed-off-by: David Sterba <dsterba@suse.cz>
Pull btrfs fixes from Chris Mason:
"None of these are huge, but my commit does fix a regression from 3.18
that could cause lost files during log replay.
This also adds Dave Sterba to the list of Btrfs maintainers. It
doesn't mean we're doing things differently, but Dave has really been
helping with the maintainer workload for years"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
Btrfs: don't delay inode ref updates during log replay
Btrfs: correctly get tree level in tree_backref_for_extent
Btrfs: call inode_dec_link_count() on mkdir error path
Btrfs: abort transaction if we don't find the block group
Btrfs, scrub: uninitialized variable in scrub_extent_for_parity()
Btrfs: add more maintainers
SRCU is not necessary to be compiled by default in all cases. For tinification
efforts not compiling SRCU unless necessary is desirable.
The current patch tries to make compiling SRCU optional by introducing a new
Kconfig option CONFIG_SRCU which is selected when any of the components making
use of SRCU are selected.
If we do not select CONFIG_SRCU, srcu.o will not be compiled at all.
text data bss dec hex filename
2007 0 0 2007 7d7 kernel/rcu/srcu.o
Size of arch/powerpc/boot/zImage changes from
text data bss dec hex filename
831552 64180 23944 919676 e087c arch/powerpc/boot/zImage : before
829504 64180 23952 917636 e0084 arch/powerpc/boot/zImage : after
so the savings are about ~2000 bytes.
Signed-off-by: Pranith Kumar <bobby.prani@gmail.com>
CC: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
CC: Josh Triplett <josh@joshtriplett.org>
CC: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
[ paulmck: resolve conflict due to removal of arch/ia64/kvm/Kconfig. ]
Commit 1d52c78afb (Btrfs: try not to ENOSPC on log replay) added a
check to skip delayed inode updates during log replay because it
confuses the enospc code. But the delayed processing will end up
ignoring delayed refs from log replay because the inode itself wasn't
put through the delayed code.
This can end up triggering a warning at commit time:
WARNING: CPU: 2 PID: 778 at fs/btrfs/delayed-inode.c:1410 btrfs_assert_delayed_root_empty+0x32/0x34()
Which is repeated for each commit because we never process the delayed
inode ref update.
The fix used here is to change btrfs_delayed_delete_inode_ref to return
an error if we're currently in log replay. The caller will do the ref
deletion immediately and everything will work properly.
Signed-off-by: Chris Mason <clm@fb.com>
cc: stable@vger.kernel.org # v3.18 and any stable series that picked 1d52c78afb
If we are using skinny metadata, the block's tree level is in the offset
of the key and not in a btrfs_tree_block_info structure following the
extent item (it doesn't exist). Therefore fix it.
Besides returning the correct level in the tree, this also prevents reading
past the leaf's end in the case where the extent item is the last item in
the leaf (eb) and it has only 1 inline reference - this is because
sizeof(struct btrfs_tree_block_info) is greater than
sizeof(struct btrfs_extent_inline_ref).
Got it while running a scrub which produced the following warning:
BTRFS: checksum error at logical 42123264 on dev /dev/sde, sector 15840: metadata node (level 24) in tree 5
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Satoru Takeuchi <takeuchi_satoru@jp.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
In btrfs_mkdir(), if it fails to create dir, we should
clean up existed items, setting inode's link properly
to make sure it could be cleaned up properly.
Signed-off-by: Wang Shilong <wangshilong1991@gmail.com>
Signed-off-by: Chris Mason <clm@fb.com>
We shouldn't BUG_ON() if there is corruption. I hit this while testing my block
group patch and the abort worked properly. Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
The only way that "ret" is set is when we call scrub_pages_for_parity()
so the skip to "if (ret) " test doesn't make sense and causes a static
checker warning.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Chris Mason <clm@fb.com>
Pull vfs pile #3 from Al Viro:
"Assorted fixes and patches from the last cycle"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
[regression] chunk lost from bd9b51
vfs: make mounts and mountstats honor root dir like mountinfo does
vfs: cleanup show_mountinfo
init: fix read-write root mount
unfuck binfmt_misc.c (broken by commit e6084d4)
vm_area_operations: kill ->migrate()
new helper: iter_is_iovec()
move_extent_per_page(): get rid of unused w_flags
lustre: get rid of playing with ->fs
btrfs: filp_open() returns ERR_PTR() on failure, not NULL...
