Commit Graph

856898 Commits

Author SHA1 Message Date
Benjamin Tissoires
c23e2043d5 HID: multitouch: do not filter mice nodes
It was a good idea at the time to not create a mouse node for the
multitouch touchscreens, but:
- touchscreens following the Win 8 protocol should not have this
  disturbing mouse node anymore, or if they have, it should be
  used for something else (like a joystick attached to the screen)
- touchpads have it, and they should not use it unless there is a bug,
  but when the laptop has a trackstick, the data are reported through this
  mouse node.

So instead of whitelisting all of the devices that have a need for the
mouse node, just export it.
hid-input.c will append a suffix to it ('Mouse'), so users will eventually
see if something goes wrong.

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
2019-08-22 17:53:16 +02:00
Linus Torvalds
15d90b2422 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID fixes from Jiri Kosina:

 - a few regression fixes for wacom driver (including fix for my earlier
   mismerge) from Aaron Armstrong Skomra and Jason Gerecke

 - revert of a few Logitech device ID additions which turn out to not
   work perfectly with the hidpp driver at the moment; proper support is
   now scheduled for 5.4. Fixes from Benjamin Tissoires

 - scheduling-in-atomic fix for cp2112 driver, from Benjamin Tissoires

 - new device ID to intel-ish, from Even Xu

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
  HID: wacom: correct misreported EKR ring values
  HID: cp2112: prevent sleeping function called from invalid context
  HID: intel-ish-hid: ipc: add EHL device id
  HID: wacom: Correct distance scale for 2nd-gen Intuos devices
  HID: logitech-hidpp: remove support for the G700 over USB
  Revert "HID: logitech-hidpp: add USB PID for a few more supported mice"
  HID: wacom: add back changes dropped in merge commit
2019-08-20 11:18:43 -07:00
Aaron Armstrong Skomra
fcf887e7ca HID: wacom: correct misreported EKR ring values
The EKR ring claims a range of 0 to 71 but actually reports
values 1 to 72. The ring is used in relative mode so this
change should not affect users.

Signed-off-by: Aaron Armstrong Skomra <aaron.skomra@wacom.com>
Fixes: 72b236d602 ("HID: wacom: Add support for Express Key Remote.")
Cc: <stable@vger.kernel.org> # v4.3+
Reviewed-by: Ping Cheng <ping.cheng@wacom.com>
Reviewed-by: Jason Gerecke <jason.gerecke@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2019-08-20 10:40:40 +02:00
Linus Torvalds
5f97cbe22b A couple fixes to the core framework logic that finds clk parents, a
handful of samsung clk driver fixes for audio and display clks, and a
 small fix for the Stratix10 SoC driver that was checking the wrong
 register for validity.
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEE9L57QeeUxqYDyoaDrQKIl8bklSUFAl1bI8sRHHNib3lkQGtl
 cm5lbC5vcmcACgkQrQKIl8bklSWJYRAAsaZUCBcuLpHXRBZDnO2/wWRQMxcl5yFi
 PDyaSfhqJ8M7IQJZ2pLY9eImVfKwzfJ0Xes2fMw5xAqVJsiXoRPgwEP1SuigTvEt
 qB9Ao3lXZkl37B5Hc/gKS/2xeDAdZfaAGE9ZwxYvVs38kikbBpxdOl8pTQbC8unt
 Cr6Ay+Gxh20FTDR68ug3jkWOtg3NfLMoM/Ynu+0WwAzsESGfcBZhOJRp50jaqe51
 d+jO3YkUU5tA/YcJrJM5PWyZDb5EK2ONUcr7Em+/MvJlz80rPgdkwLGYz+5fgJBz
 QtDp664Gxaq+Uqq8GW/Uz+zvkoEnFKWbyAxXMwRHwDLVzaPO0Nm0LKFPLRcRNOuL
 qYe6hB+MekDelmeBoVYQ7JQEiPdZx5i9JcldZase+5hUzr5co1SVfl84LTz3il6d
 JJdm/PBv0AXQJXg39H3zcbbjEtVzfOI7FZqTLiruxm9wkT7kRyEcj5BB9zpIMEY1
 4MatzJL5uiZnAuPA3BA/FB/5lK6bJu6arIdRK4pXRYZvvw5gEvGBJCCvA6pY+z6n
 iqPazWPcyRIiBon2o3UqRkZxBeiKhfsXyeNNq15jQh7pq7W+D6r+G/NSbV5hv2Ji
 OeqXV/zhdIfYayfJXzpSxiLYaNDq+qPn0AWLPcm35Sj5wfOZKM3jg6ZFkPgaq6n8
 kr7r417ixuc=
 =1qKh
 -----END PGP SIGNATURE-----

Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

Pull clk fixes from Stephen Boyd:
 "A couple fixes to the core framework logic that finds clk parents, a
  handful of samsung clk driver fixes for audio and display clks, and a
  small fix for the Stratix10 SoC driver that was checking the wrong
  register for validity"

* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
  clk: Fix potential NULL dereference in clk_fetch_parent_index()
  clk: Fix falling back to legacy parent string matching
  clk: socfpga: stratix10: fix rate caclulationg for cnt_clks
  clk: samsung: exynos542x: Move MSCL subsystem clocks to its sub-CMU
  clk: samsung: exynos5800: Move MAU subsystem clocks to MAU sub-CMU
  clk: samsung: Change signature of exynos5_subcmus_init() function
2019-08-19 16:28:25 -07:00
Linus Torvalds
287c55ed7d Merge branch 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull kernel thread signal handling fix from Eric Biederman:
 "I overlooked the fact that kernel threads are created with all signals
  set to SIG_IGN, and accidentally caused a regression in cifs and drbd
  when replacing force_sig with send_sig.

  This is my fix for that regression. I add a new function
  allow_kernel_signal which allows kernel threads to receive signals
  sent from the kernel, but continues to ignore all signals sent from
  userspace. This ensures the user space interface for cifs and drbd
  remain the same.

  These kernel threads depend on blocking networking calls which block
  until something is received or a signal is pending. Making receiving
  of signals somewhat necessary for these kernel threads.

  Perhaps someday we can cleanup those interfaces and remove
  allow_kernel_signal. If not allow_kernel_signal is pretty trivial and
  clearly documents what is going on so I don't think we will mind
  carrying it"

* 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
  signal: Allow cifs and drbd to receive their terminating signals
2019-08-19 16:17:59 -07:00
Linus Torvalds
06821504fd Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from David Miller:

  1) Fix jmp to 1st instruction in x64 JIT, from Alexei Starovoitov.

  2) Severl kTLS fixes in mlx5 driver, from Tariq Toukan.

  3) Fix severe performance regression due to lack of SKB coalescing of
     fragments during local delivery, from Guillaume Nault.

  4) Error path memory leak in sch_taprio, from Ivan Khoronzhuk.

  5) Fix batched events in skbedit packet action, from Roman Mashak.

  6) Propagate VLAN TX offload to hw_enc_features in bond and team
     drivers, from Yue Haibing.

  7) RXRPC local endpoint refcounting fix and read after free in
     rxrpc_queue_local(), from David Howells.

  8) Fix endian bug in ibmveth multicast list handling, from Thomas
     Falcon.

  9) Oops, make nlmsg_parse() wrap around the correct function,
     __nlmsg_parse not __nla_parse(). Fix from David Ahern.

 10) Memleak in sctp_scend_reset_streams(), fro Zheng Bin.

 11) Fix memory leak in cxgb4, from Wenwen Wang.

 12) Yet another race in AF_PACKET, from Eric Dumazet.

 13) Fix false detection of retransmit failures in tipc, from Tuong
     Lien.

 14) Use after free in ravb_tstamp_skb, from Tho Vu.

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (101 commits)
  ravb: Fix use-after-free ravb_tstamp_skb
  netfilter: nf_tables: map basechain priority to hardware priority
  net: sched: use major priority number as hardware priority
  wimax/i2400m: fix a memory leak bug
  net: cavium: fix driver name
  ibmvnic: Unmap DMA address of TX descriptor buffers after use
  bnxt_en: Fix to include flow direction in L2 key
  bnxt_en: Use correct src_fid to determine direction of the flow
  bnxt_en: Suppress HWRM errors for HWRM_NVM_GET_VARIABLE command
  bnxt_en: Fix handling FRAG_ERR when NVM_INSTALL_UPDATE cmd fails
  bnxt_en: Improve RX doorbell sequence.
  bnxt_en: Fix VNIC clearing logic for 57500 chips.
  net: kalmia: fix memory leaks
  cx82310_eth: fix a memory leak bug
  bnx2x: Fix VF's VLAN reconfiguration in reload.
  Bluetooth: Add debug setting for changing minimum encryption key size
  tipc: fix false detection of retransmit failures
  lan78xx: Fix memory leaks
  MAINTAINERS: r8169: Update path to the driver
  MAINTAINERS: PHY LIBRARY: Update files in the record
  ...
2019-08-19 10:00:01 -07:00
David Howells
555df336c7 keys: Fix description size
The maximum key description size is 4095.  Commit f771fde820 ("keys:
Simplify key description management") inadvertantly reduced that to 255
and made sizes between 256 and 4095 work weirdly, and any size whereby
size & 255 == 0 would cause an assertion in __key_link_begin() at the
following line:

	BUG_ON(index_key->desc_len == 0);

This can be fixed by simply increasing the size of desc_len in struct
keyring_index_key to a u16.

Note the argument length test in keyutils only checked empty
descriptions and descriptions with a size around the limit (ie.  4095)
and not for all the values in between, so it missed this.  This has been
addressed and

	https://git.kernel.org/pub/scm/linux/kernel/git/dhowells/keyutils.git/commit/?id=066bf56807c26cd3045a25f355b34c1d8a20a5aa

now exhaustively tests all possible lengths of type, description and
payload and then some.

The assertion failure looks something like:

 kernel BUG at security/keys/keyring.c:1245!
 ...
 RIP: 0010:__key_link_begin+0x88/0xa0
 ...
 Call Trace:
  key_create_or_update+0x211/0x4b0
  __x64_sys_add_key+0x101/0x200
  do_syscall_64+0x5b/0x1e0
  entry_SYSCALL_64_after_hwframe+0x44/0xa9

It can be triggered by:

	keyctl add user "aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa" a @s

Fixes: f771fde820 ("keys: Simplify key description management")
Reported-by: kernel test robot <rong.a.chen@intel.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-08-19 09:43:57 -07:00
Benjamin Tissoires
2d05dba2b2 HID: cp2112: prevent sleeping function called from invalid context
When calling request_threaded_irq() with a CP2112, the function
cp2112_gpio_irq_startup() is called in a IRQ context.

Therefore we can not sleep, and we can not call
cp2112_gpio_direction_input() there.

Move the call to cp2112_gpio_direction_input() earlier to have a working
driver.

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2019-08-19 14:13:00 +02:00
Even Xu
b640be5bc8 HID: intel-ish-hid: ipc: add EHL device id
EHL is a new platform using ishtp solution, add its device id
to support list.

Signed-off-by: Even Xu <even.xu@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2019-08-19 14:10:41 +02:00
Jason Gerecke
b72fb1dcd2 HID: wacom: Correct distance scale for 2nd-gen Intuos devices
Distance values reported by 2nd-gen Intuos tablets are on an inverted
scale (0 == far, 63 == near). We need to change them over to a normal
scale before reporting to userspace or else userspace drivers and
applications can get confused.

Ref: https://github.com/linuxwacom/input-wacom/issues/98
Fixes: eda01dab53 ("HID: wacom: Add four new Intuos devices")
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Cc: <stable@vger.kernel.org> # v4.4+
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2019-08-19 14:08:58 +02:00
Eric W. Biederman
33da8e7c81 signal: Allow cifs and drbd to receive their terminating signals
My recent to change to only use force_sig for a synchronous events
wound up breaking signal reception cifs and drbd.  I had overlooked
the fact that by default kthreads start out with all signals set to
SIG_IGN.  So a change I thought was safe turned out to have made it
impossible for those kernel thread to catch their signals.

Reverting the work on force_sig is a bad idea because what the code
was doing was very much a misuse of force_sig.  As the way force_sig
ultimately allowed the signal to happen was to change the signal
handler to SIG_DFL.  Which after the first signal will allow userspace
to send signals to these kernel threads.  At least for
wake_ack_receiver in drbd that does not appear actively wrong.

So correct this problem by adding allow_kernel_signal that will allow
signals whose siginfo reports they were sent by the kernel through,
but will not allow userspace generated signals, and update cifs and
drbd to call allow_kernel_signal in an appropriate place so that their
thread can receive this signal.

Fixing things this way ensures that userspace won't be able to send
signals and cause problems, that it is clear which signals the
threads are expecting to receive, and it guarantees that nothing
else in the system will be affected.

This change was partly inspired by similar cifs and drbd patches that
added allow_signal.

Reported-by: ronnie sahlberg <ronniesahlberg@gmail.com>
Reported-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com>
Tested-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com>
Cc: Steve French <smfrench@gmail.com>
Cc: Philipp Reisner <philipp.reisner@linbit.com>
Cc: David Laight <David.Laight@ACULAB.COM>
Fixes: 247bc9470b ("cifs: fix rmmod regression in cifs.ko caused by force_sig changes")
Fixes: 72abe3bcf0 ("signal/cifs: Fix cifs_put_tcp_session to call send_sig instead of force_sig")
Fixes: fee109901f ("signal/drbd: Use send_sig not force_sig")
Fixes: 3cf5d076fb ("signal: Remove task parameter from force_sig")
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2019-08-19 06:34:13 -05:00
Linus Torvalds
d1abaeb3be Linux 5.3-rc5 2019-08-18 14:31:08 -07:00
Tho Vu
cfef46d692 ravb: Fix use-after-free ravb_tstamp_skb
When a Tx timestamp is requested, a pointer to the skb is stored in the
ravb_tstamp_skb struct. This was done without an skb_get. There exists
the possibility that the skb could be freed by ravb_tx_free (when
ravb_tx_free is called from ravb_start_xmit) before the timestamp was
processed, leading to a use-after-free bug.

Use skb_get when filling a ravb_tstamp_skb struct, and add appropriate
frees/consumes when a ravb_tstamp_skb struct is freed.

Fixes: c156633f13 ("Renesas Ethernet AVB driver proper")
Signed-off-by: Tho Vu <tho.vu.wh@rvc.renesas.com>
Signed-off-by: Kazuya Mizuguchi <kazuya.mizuguchi.ks@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-18 14:19:14 -07:00
David S. Miller
5cbe9102ae Merge branch 'flow_offload-hardware-priority-fixes'
Pablo Neira Ayuso says:

====================
flow_offload hardware priority fixes

This patchset contains two updates for the flow_offload users:

1) Pass the major tc priority to drivers so they do not have to
   lshift it. This is a preparation patch for the fix coming in
   patch #2.

2) Set the hardware priority from the netfilter basechain priority,
   some drivers break when using the existing hardware priority
   number that is set to zero.

v5: fix patch 2/2 to address a clang warning and to simplify
    the priority mapping.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-18 14:13:23 -07:00
Pablo Neira Ayuso
3bc158f8d0 netfilter: nf_tables: map basechain priority to hardware priority
This patch adds initial support for offloading basechains using the
priority range from 1 to 65535. This is restricting the netfilter
priority range to 16-bit integer since this is what most drivers assume
so far from tc. It should be possible to extend this range of supported
priorities later on once drivers are updated to support for 32-bit
integer priorities.

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-18 14:13:23 -07:00
Pablo Neira Ayuso
ef01adae0e net: sched: use major priority number as hardware priority
tc transparently maps the software priority number to hardware. Update
it to pass the major priority which is what most drivers expect. Update
drivers too so they do not need to lshift the priority field of the
flow_cls_common_offload object. The stmmac driver is an exception, since
this code assumes the tc software priority is fine, therefore, lshift it
just to be conservative.

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-18 14:13:23 -07:00
Wenwen Wang
44ef3a0325 wimax/i2400m: fix a memory leak bug
In i2400m_barker_db_init(), 'options_orig' is allocated through kstrdup()
to hold the original command line options. Then, the options are parsed.
However, if an error occurs during the parsing process, 'options_orig' is
not deallocated, leading to a memory leak bug. To fix this issue, free
'options_orig' before returning the error.

Signed-off-by: Wenwen Wang <wenwen@cs.uga.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-18 14:11:28 -07:00
Stephen Hemminger
3434341004 net: cavium: fix driver name
The driver name gets exposed in sysfs under /sys/bus/pci/drivers
so it should look like other devices. Change it to be common
format (instead of "Cavium PTP").

This is a trivial fix that was observed by accident because
Debian kernels were building this driver into kernel (bug).

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-18 14:02:06 -07:00
Thomas Falcon
80f0fe0934 ibmvnic: Unmap DMA address of TX descriptor buffers after use
There's no need to wait until a completion is received to unmap
TX descriptor buffers that have been passed to the hypervisor.
Instead unmap it when the hypervisor call has completed. This patch
avoids the possibility that a buffer will not be unmapped because
a TX completion is lost or mishandled.

Reported-by: Abdul Haleem <abdhalee@linux.vnet.ibm.com>
Tested-by: Devesh K. Singh <devesh_singh@in.ibm.com>
Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-18 13:57:31 -07:00
David S. Miller
37b0a733c1 Merge branch 'bnxt_en-Bug-fixes'
Michael Chan says:

====================
bnxt_en: Bug fixes.

2 Bug fixes related to 57500 shutdown sequence and doorbell sequence,
2 TC Flower bug fixes related to the setting of the flow direction,
1 NVRAM update bug fix, and a minor fix to suppress an unnecessary
error message.  Please queue for -stable as well.  Thanks.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-18 13:05:01 -07:00
Somnath Kotur
9bf46566e8 bnxt_en: Fix to include flow direction in L2 key
FW expects the driver to provide unique flow reference handles
for Tx or Rx flows. When a Tx flow and an Rx flow end up sharing
a reference handle, flow offload does not seem to work.
This could happen in the case of 2 flows having their L2 fields
wildcarded but in different direction.
Fix to incorporate the flow direction as part of the L2 key

v2: Move the dir field to the end of the bnxt_tc_l2_key struct to
fix the warning reported by kbuild test robot <lkp@intel.com>.
There is existing code that initializes the structure using
nested initializer and will warn with the new u8 field added to
the beginning.  The structure also packs nicer when this new u8 is
added to the end of the structure [MChan].

Fixes: abd43a1352 ("bnxt_en: Support for 64-bit flow handle.")
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-18 13:05:01 -07:00
Venkat Duvvuru
685ec6a81b bnxt_en: Use correct src_fid to determine direction of the flow
Direction of the flow is determined using src_fid. For an RX flow,
src_fid is PF's fid and for TX flow, src_fid is VF's fid. Direction
of the flow must be specified, when getting statistics for that flow.
Currently, for DECAP flow, direction is determined incorrectly, i.e.,
direction is initialized as TX for DECAP flow, instead of RX. Because
of which, stats are not reported for this DECAP flow, though it is
offloaded and there is traffic for that flow, resulting in flow age out.

This patch fixes the problem by determining the DECAP flow's direction
using correct fid.  Set the flow direction in all cases for consistency
even if 64-bit flow handle is not used.

Fixes: abd43a1352 ("bnxt_en: Support for 64-bit flow handle.")
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-18 13:05:01 -07:00
Vasundhara Volam
b703ba751d bnxt_en: Suppress HWRM errors for HWRM_NVM_GET_VARIABLE command
For newly added NVM parameters, older firmware may not have the support.
Suppress the error message to avoid the unncessary error message which is
triggered when devlink calls the driver during initialization.

Fixes: 782a624d00 ("bnxt_en: Add bnxt_en initial params table and register it.")
Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-18 13:05:01 -07:00
Vasundhara Volam
dd2ebf3404 bnxt_en: Fix handling FRAG_ERR when NVM_INSTALL_UPDATE cmd fails
If FW returns FRAG_ERR in response error code, driver is resending the
command only when HWRM command returns success. Fix the code to resend
NVM_INSTALL_UPDATE command with DEFRAG install flags, if FW returns
FRAG_ERR in its response error code.

Fixes: cb4d1d6261 ("bnxt_en: Retry failed NVM_INSTALL_UPDATE with defragmentation flag enabled.")
Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-18 13:05:01 -07:00
Michael Chan
e8f267b063 bnxt_en: Improve RX doorbell sequence.
When both RX buffers and RX aggregation buffers have to be
replenished at the end of NAPI, post the RX aggregation buffers first
before RX buffers.  Otherwise, we may run into a situation where
there are only RX buffers without RX aggregation buffers for a split
second.  This will cause the hardware to abort the RX packet and
report buffer errors, which will cause unnecessary cleanup by the
driver.

Ringing the Aggregation ring doorbell first before the RX ring doorbell
will prevent some of these buffer errors.  Use the same sequence during
ring initialization as well.

Fixes: 697197e5a1 ("bnxt_en: Re-structure doorbells.")
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-18 13:05:00 -07:00
Michael Chan
a46ecb116f bnxt_en: Fix VNIC clearing logic for 57500 chips.
During device shutdown, the VNIC clearing sequence needs to be modified
to free the VNIC first before freeing the RSS contexts.  The current
code is doing the reverse and we can get mis-directed RX completions
to CP ring ID 0 when the RSS contexts are freed and zeroed.  The clearing
of RSS contexts is not required with the new sequence.

Refactor the VNIC clearing logic into a new function bnxt_clear_vnic()
and do the chip specific VNIC clearing sequence.

Fixes: 7b3af4f75b ("bnxt_en: Add RSS support for 57500 chips.")
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-18 13:05:00 -07:00
Wenwen Wang
f1472cb09f net: kalmia: fix memory leaks
In kalmia_init_and_get_ethernet_addr(), 'usb_buf' is allocated through
kmalloc(). In the following execution, if the 'status' returned by
kalmia_send_init_packet() is not 0, 'usb_buf' is not deallocated, leading
to memory leaks. To fix this issue, add the 'out' label to free 'usb_buf'.

Signed-off-by: Wenwen Wang <wenwen@cs.uga.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-18 13:03:21 -07:00
Wenwen Wang
1eca92eef1 cx82310_eth: fix a memory leak bug
In cx82310_bind(), 'dev->partial_data' is allocated through kmalloc().
Then, the execution waits for the firmware to become ready. If the firmware
is not ready in time, the execution is terminated. However, the allocated
'dev->partial_data' is not deallocated on this path, leading to a memory
leak bug. To fix this issue, free 'dev->partial_data' before returning the
error.

Signed-off-by: Wenwen Wang <wenwen@cs.uga.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-18 13:01:54 -07:00
Linus Torvalds
6825e5a6c4 This pull request contains a single fix for MTD:
- spi-nor: Fix to correctly set the WP pin
 -----BEGIN PGP SIGNATURE-----
 
 iQJKBAABCAA0FiEEdgfidid8lnn52cLTZvlZhesYu8EFAl1ZqZMWHHJpY2hhcmRA
 c2lnbWEtc3Rhci5hdAAKCRBm+VmF6xi7wZ21EADh+84WfLoWiAaD8wPByib7E6s2
 Lu8yfOjEpAskts2/v7H5wihYtgnKcyOgqVIjSJr9uQkbRebi98LNBPr9mhyW+TB0
 KzrDXb3l5gJkfHPHK9WaZFkH7c6hXCgnpD3g6YVZF4eU52znhc0Ci2UIEjHtoy/7
 ULrz6IilIH20gDC8GA2vJIMEwTBjYf3hMFmxPq080bjO3KzSv8yGX45IoYpARk2C
 DZxHkFM8wj25B59ChmtQ6kKtkf7MBC0WwEeaeUoLT1lh59wY5cU+nBECl/4ujwh7
 WRb7ZH8ml5t+vyMebg/pxHJiQNUQBoKv2TMPKhaRvnlu44WWHEClvOfWI29AZDGN
 pm1zgkCw/R3+6qpdBgYqKv6GVuiUqcgciMz0jG4RdmhYqSe9RFoPoF0LAfFoZ22i
 jtNfbseS130n7jgvW7VAV9OFU6U5PAp/WM0UdQcjfuwJKEY/spkmDOqtKF73YSrM
 N9NHD4JUoc7mXKQWkO0y/hNE6g6MK2GInkJgXgwpl0DuP4mQs8PJTXEqVd6YCpnF
 LykPtLO8D9AFg8Cms/adxdrBDIAL4ZI9klh0agWPGpDBadHdndqVaWH52RDosxBw
 L6qsAsB2hyQm0bt5TCFMsYMUY5dCqb4Q4wUexXPT1wy1/uAlwxagwgRT159SaRVs
 a3/94O0KnhRii4Qt9Q==
 =AzKU
 -----END PGP SIGNATURE-----

Merge tag 'fixes-for-5.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux

Pull MTD fix from Richard Weinberger:
 "A single fix for MTD to correctly set the spi-nor WP pin"

* tag 'fixes-for-5.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux:
  mtd: spi-nor: Fix the disabling of write protection at init
2019-08-18 12:56:42 -07:00
Manish Chopra
4a4d2d372f bnx2x: Fix VF's VLAN reconfiguration in reload.
Commit 04f05230c5 ("bnx2x: Remove configured vlans as
part of unload sequence."), introduced a regression in driver
that as a part of VF's reload flow, VLANs created on the VF
doesn't get re-configured in hardware as vlan metadata/info
was not getting cleared for the VFs which causes vlan PING to stop.

This patch clears the vlan metadata/info so that VLANs gets
re-configured back in the hardware in VF's reload flow and
PING/traffic continues for VLANs created over the VFs.

Fixes: 04f05230c5 ("bnx2x: Remove configured vlans as part of unload sequence.")
Signed-off-by: Manish Chopra <manishc@marvell.com>
Signed-off-by: Sudarsana Kalluru <skalluru@marvell.com>
Signed-off-by: Shahed Shaikh <shshaikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-18 12:45:07 -07:00
Linus Torvalds
3039fadf2b for-5.3-rc4-tag
-----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEE8rQSAMVO+zA4DBdWxWXV+ddtWDsFAl1ZOygACgkQxWXV+ddt
 WDvokw/8CRjbN5Bjlk/JzmikH+mU28Cd7qQgahWw7Afkyh5Gzb4IJJbNXzapy988
 dMMKYF2H6lxY46EZG8cF4MFjCv8L4L1eZ9CqwfZyf7MfzPL2pnLSN77QJYYebWp3
 y9rc8xv+qUdIcumQP25yxXmtN0YxT5bIJiuCmpHJFNfyijHVRnXV2CxQ8nwe63/1
 G25a03x6BNKtSrU3ZP0fW2VjARKzIF7i+bEy4Ew3n3dNKqAiROYecswcBedhCBkF
 D9hL62uHcxQSeHi/6lAZYKpsp4g4pKEO4c92MxsI8PJtd4zgHQG7MttXsHC1F1FQ
 lHcP3vxKICOOMa13W6QdytSX6uSpjeLyMTDfmvaahQmwG6I5dBN56pkGlWdDMKNn
 NUCNBmV063D7Shed4W2uIafLfo3BLEwKr2pd6pOfOZHwOKPWblJ0v4KzVDLoKC7v
 CA5HB9BBz4KfSyp3fkm9B5VGJW938vRHVfx55IoakL+tfs67cKDYo8QEFHDuz0P5
 DrYNwKvp4a5llGQ6vdRKfeiN7vBea10795MI5vFJiGUHfY3pN99R4UUed7kaul58
 n6gqYukcPtIBqm8auxK037nngA+V0N2y0ceM1/aKUGaZVlCtSmEKXseYjbaiH6fP
 MEZSgZn4W5qnu2oQuKohfQsNHtY5WP9489GpByy+DS5QsbDaueg=
 =ovM7
 -----END PGP SIGNATURE-----

Merge tag 'for-5.3-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux

Pull btrfs fixes from David Sterba:
 "Two fixes that popped up during testing:

   - fix for sysfs-related code that adds/removes block groups, warnings
     appear during several fstests in connection with sysfs updates in
     5.3, the fix essentially replaces a workaround with scope NOFS and
     applies to 5.2-based branch too

   - add sanity check of trim range"

* tag 'for-5.3-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: trim: Check the range passed into to prevent overflow
  Btrfs: fix sysfs warning and missing raid sysfs directories
2019-08-18 09:51:48 -07:00
Linus Torvalds
c332f3a70e Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
 "A set of fixes for x86:

   - Fix the inconsistent error handling in the umwait init code

   - Rework the boot param zeroing so gcc9 stops complaining about out
     of bound memset. The resulting source code is actually more sane to
     read than the smart solution we had

   - Maintainers update so Tony gets involved when Intel models are
     added

   - Some more fallthrough fixes"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/boot: Save fields explicitly, zero out everything else
  MAINTAINERS, x86/CPU: Tony Luck will maintain asm/intel-family.h
  x86/fpu/math-emu: Address fallthrough warnings
  x86/apic/32: Fix yet another implicit fallthrough warning
  x86/umwait: Fix error handling in umwait_init()
2019-08-18 09:45:42 -07:00
Linus Torvalds
645c03aaca Merge branch 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull EFI fix from Thomas Gleixner:
 "A single fix for a EFI mixed mode regression caused by recent rework
  which did not take the firmware bitwidth into account"

* 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  efi-stub: Fix get_efi_config_table on mixed-mode setups
2019-08-18 09:36:51 -07:00
Linus Torvalds
5bba5c9c86 SPDX fixes for 5.3-rc5
Here are 4 small SPDX fixes for 5.3-rc5.  A few style fixes for some
 SPDX comments, added an SPDX tag for one file, and fix up some GPL
 boilerplate for another file.
 
 All of these have been in linux-next for a few weeks with no reported
 issues (they are comment changes only, so that's to be expected...)
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXVkVSg8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+yneygCfdBxdIl98qXA2SRDLeKl/PkSJH1gAoLwnkoKq
 WK/gN0IMFf25UrItBsGe
 =b31n
 -----END PGP SIGNATURE-----

Merge tag 'spdx-5.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx

Pull SPDX fixes from Greg KH:
 "Here are four small SPDX fixes for 5.3-rc5.

  A few style fixes for some SPDX comments, added an SPDX tag for one
  file, and fix up some GPL boilerplate for another file.

  All of these have been in linux-next for a few weeks with no reported
  issues (they are comment changes only, so that's to be expected...)"

* tag 'spdx-5.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx:
  i2c: stm32: Use the correct style for SPDX License Identifier
  intel_th: Use the correct style for SPDX License Identifier
  coccinelle: api/atomic_as_refcounter: add SPDX License Identifier
  kernel/configs: Replace GPL boilerplate code with SPDX identifier
2019-08-18 09:26:16 -07:00
Linus Torvalds
4503c0a415 Char/Misc driver fixes for 5.3-rc5
Here are some small char and misc driver fixes for 5.3-rc5.
 
 These are two different subsystems needing some fixes, the habanalabs
 driver which is has some more big endian fixes for problems found.  The
 other are some small soundwire fixes, including some Kconfig
 dependencies needed to resolve reported build errors.
 
 All of these have been in linux-next this week with no reported issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXVkQPw8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ym1sACePhtyIBmmKjWfN/j/RRiUTCjx9k8AoIXUzKY0
 qg8p1RnTK6PaLruKz6qz
 =xrwH
 -----END PGP SIGNATURE-----

Merge tag 'char-misc-5.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc driver fixes from Greg KH:
 "Here are some small char and misc driver fixes for 5.3-rc5.

  These are two different subsystems needing some fixes, the habanalabs
  driver which is has some more big endian fixes for problems found. The
  other are some small soundwire fixes, including some Kconfig
  dependencies needed to resolve reported build errors.

  All of these have been in linux-next this week with no reported
  issues"

* tag 'char-misc-5.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  misc: xilinx-sdfec: fix dependency and build error
  habanalabs: fix device IRQ unmasking for BE host
  habanalabs: fix endianness handling for internal QMAN submission
  habanalabs: fix completion queue handling when host is BE
  habanalabs: fix endianness handling for packets from user
  habanalabs: fix DRAM usage accounting on context tear down
  habanalabs: Avoid double free in error flow
  soundwire: fix regmap dependencies and align with other serial links
  soundwire: cadence_master: fix definitions for INTSTAT0/1
  soundwire: cadence_master: fix register definition for SLAVE_STATE
2019-08-18 09:17:41 -07:00
Linus Torvalds
ae1a616af3 Staging/IIO fixes for 5.3-rc5
Here are 4 small staging and iio driver fixes for 5.3-rc5
 
 Two are for the dt3000 comedi driver for some reported problems found in
 that codebase, and two are some small iio fixes.
 
 All of these have been in linux-next this week with no reported issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXVkO4w8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ylBMQCaAoq34gPVhedcR2cA2BeAcf4CpjAAn224DdGw
 Xkh8oXn1fdrgbdbX1biP
 =PQLD
 -----END PGP SIGNATURE-----

Merge tag 'staging-5.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging

Pull staging/IIO fixes from Greg KH:
 "Here are four small staging and iio driver fixes for 5.3-rc5

  Two are for the dt3000 comedi driver for some reported problems found
  in that codebase, and two are some small iio fixes.

  All of these have been in linux-next this week with no reported
  issues"

* tag 'staging-5.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  staging: comedi: dt3000: Fix rounding up of timer divisor
  staging: comedi: dt3000: Fix signed integer overflow 'divider * base'
  iio: adc: max9611: Fix temperature reading in probe
  iio: frequency: adf4371: Fix output frequency setting
2019-08-18 09:14:56 -07:00
Linus Torvalds
359334caf7 USB fixes for 5.3-rc5
Here are number of small USB fixes for 5.3-rc5.
 
 Syzbot has been on a tear recently now that it has some good USB
 debugging hooks integrated, so there's a number of fixes in here found
 by those tools for some _very_ old bugs.  Also a handful of gadget
 driver fixes for reported issues, some hopefully-final dma fixes for
 host controller drivers, and some new USB serial gadget driver ids.
 
 All of these have been in linux-next this week with no reported issues
 (the usb-serial ones were in linux-next in its own branch, but merged
 into mine on Friday.)
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXVkR9w8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+yk7ywCfYEscZ0Fba24B0gxOp7CMTxk/oCUAoJHiKz8a
 1lDHV14mE/NqJgLo5dAU
 =c4FQ
 -----END PGP SIGNATURE-----

Merge tag 'usb-5.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB fixes from Greg KH:
 "Here are number of small USB fixes for 5.3-rc5.

  Syzbot has been on a tear recently now that it has some good USB
  debugging hooks integrated, so there's a number of fixes in here found
  by those tools for some _very_ old bugs. Also a handful of gadget
  driver fixes for reported issues, some hopefully-final dma fixes for
  host controller drivers, and some new USB serial gadget driver ids.

  All of these have been in linux-next this week with no reported issues
  (the usb-serial ones were in linux-next in its own branch, but merged
  into mine on Friday)"

* tag 'usb-5.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  usb: add a hcd_uses_dma helper
  usb: don't create dma pools for HCDs with a localmem_pool
  usb: chipidea: imx: fix EPROBE_DEFER support during driver probe
  usb: host: fotg2: restart hcd after port reset
  USB: CDC: fix sanity checks in CDC union parser
  usb: cdc-acm: make sure a refcount is taken early enough
  USB: serial: option: add the BroadMobi BM818 card
  USB: serial: option: Add Motorola modem UARTs
  USB: core: Fix races in character device registration and deregistraion
  usb: gadget: mass_storage: Fix races between fsg_disable and fsg_set_alt
  usb: gadget: composite: Clear "suspended" on reset/disconnect
  usb: gadget: udc: renesas_usb3: Fix sysfs interface of "role"
  USB: serial: option: add D-Link DWM-222 device ID
  USB: serial: option: Add support for ZTE MF871A
2019-08-18 09:11:29 -07:00
Linus Torvalds
8fde2832bd for-linus-2019-08-17
-----BEGIN PGP SIGNATURE-----
 
 iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAl1Ygq4QHGF4Ym9lQGtl
 cm5lbC5kawAKCRD301j7KXHgpjUnD/47XM1xHO2L/66+XiRnXwNc0Zmc0cNrtIsp
 09EqZFeSwaqJKfoodcDphuHSYf6jkLk9xRKiFEr+KrUfzwvmgN3fFlbk6Azz0A4f
 ACv4DtTPML40QUGzo5c+UfnJTwK8z4An/lG4aNDB3UucFwoWhfvLkzQAN+FNilAQ
 sMTWPvhjiV/E7BMa7p108/NL9sv0UzUzgIOI7cZCq/Z5/jJBiohl4DzPPyfCKzOK
 shKP3Q7zId2q7d9zJZZuwy/iYLTCEHzy+37hxS7343vXeTlxKbrxY6xKZ8Rhsccx
 E3ep+SYuRxl7BHXPTwFh5HSMRXq5JEVBy3dnoMzFEu6pqzAPyLjQS0tG/lR9T1uS
 E8t0QnsdjVvedF/c3a3b2pVcYCbRjHsB/5DLBPxRfgAPkvVm180XKQM95HkLQYle
 A74mgU1WODnXsdyJeAacf1b+3t8p+5x5vpRq6Ls6dgmGn74qhfvs4tQnqypFFnyR
 Le0O7ICWKotQFo0CzbPB029xORepq9HLkFEeh73K6uG+Bn5iGMC1oUmxB0uSuHpz
 h9lPDjjj6RSLpzp1jCqswSHsQi00sLSKMtytjEt83/EWPcyN2oiPP1BTq+9jITYR
 SvoKF6R+CLwQscb/DEXb/vRSehg5aivXHg1AOo0l6/OiPQmNdmSZEU4/McPoB2xW
 1MC5Y4wV1g==
 =f6DS
 -----END PGP SIGNATURE-----

Merge tag 'for-linus-2019-08-17' of git://git.kernel.dk/linux-block

Pull block fixes from Jens Axboe:
 "A collection of fixes that should go into this series. This contains:

   - Revert of the REQ_NOWAIT_INLINE and associated dio changes. There
     were still corner cases there, and even though I had a solution for
     it, it's too involved for this stage. (me)

   - Set of NVMe fixes (via Sagi)

   - io_uring fix for fixed buffers (Anthony)

   - io_uring defer issue fix (Jackie)

   - Regression fix for queue sync at exit time (zhengbin)

   - xen blk-back memory leak fix (Wenwen)"

* tag 'for-linus-2019-08-17' of git://git.kernel.dk/linux-block:
  io_uring: fix an issue when IOSQE_IO_LINK is inserted into defer list
  block: remove REQ_NOWAIT_INLINE
  io_uring: fix manual setup of iov_iter for fixed buffers
  xen/blkback: fix memory leaks
  blk-mq: move cancel of requeue_work to the front of blk_exit_queue
  nvme-pci: Fix async probe remove race
  nvme: fix controller removal race with scan work
  nvme-rdma: fix possible use-after-free in connect error flow
  nvme: fix a possible deadlock when passthru commands sent to a multipath device
  nvme-core: Fix extra device_put() call on error path
  nvmet-file: fix nvmet_file_flush() always returning an error
  nvmet-loop: Flush nvme_delete_wq when removing the port
  nvmet: Fix use-after-free bug when a port is removed
  nvme-multipath: revalidate nvme_ns_head gendisk in nvme_validate_ns
2019-08-17 19:39:54 -07:00
Linus Torvalds
85d8d3b172 - A few fixes for the userspace hyper-v tools from Adrian Vladu.
- A fix for the hyper-v MAINTAINERs entry from Lan Tianyu.
 - Fix for SPDX license identifier in the userspace tools from Nishad
 Kamdar.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEE4n5dijQDou9mhzu83qZv95d3LNwFAl1YXCEACgkQ3qZv95d3
 LNy/cxAAjyyxIPmu7bUi9jN9YHbEQjCRQJBMvm+/hfqoiiWZa/GglfWw5EY+zAJi
 pHzWyMiOTeubgiMpA17yE0QK6iigPcxN7mOmcrmuWuKIgJthLZFXPhaCrx8apEty
 Ovm9qNjFulpBks/U2r+Pfi8rj7gLqJ5a5qGydYvlrJOTfIRXDYU93HAAdJutraqF
 w34sWxpQjKaTxva+JK7Em2/UCXrCNQ8Tzz7E3cLf20Z+PDGgkHAIWF8p+SAlosOd
 GKzYrW8z7yr1pwcwyLW6yEMlKMENq66pRkk1s0oUbwgQuCmb8HllWazIRkXAAHiD
 1I6r4A2aH7VemBxGKoAH0ENXB5MX5hTmyjOXONM4wqa/24nQsm9mjpuDY/aIRngZ
 3qCsQ/4xpZpKJxccY7DzAcpT7VPSpMM9patAk2C+QXbYIg/HpWfY+42OsnwjnjcE
 D89azjnhIeyOWOFvKxD187hPXd/lfoReC+czCisJvHxR4OPOP1chIUx6VZ25e91d
 gzJqggippL5+QgSt2pYtf6INlsMThvW/2/LLXGxR/r+CEpVAfXFlLBoz7OfwElZ2
 m2vdbwo+0aIOVHL51594Wc78yZM2EQxlMNwt8l7mKTDxxwSlIcC4VHX8r46Df8AA
 GgFSG2pnMNID/a9Rhr7KWzXnaBlALKfGKypz9BPtLKasHal32X8=
 =iKcM
 -----END PGP SIGNATURE-----

Merge tag 'hyperv-fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux

Pull Hyper-V fixes from Sasha Levin:

 - A few fixes for the userspace hyper-v tools from Adrian Vladu.

 - A fix for the hyper-v MAINTAINERs entry from Lan Tianyu.

 - Fix for SPDX license identifier in the userspace tools from Nishad
   Kamdar.

* tag 'hyperv-fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
  MAINTAINERS: Fix Hyperv vIOMMU driver file name
  tools: hv: Use the correct style for SPDX License Identifier
  tools: hv: fix typos in toolchain
  tools: hv: fix KVP and VSS daemons exit code
  tools: hv: fixed Python pep8/flake8 warnings for lsvmbus
2019-08-17 19:31:30 -07:00
David S. Miller
42eb455470 Merge branch 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
Johan Hedberg says:

====================
pull request: bluetooth 2019-08-17

Here's a set of Bluetooth fixes for the 5.3-rc series:

 - Multiple fixes for Qualcomm (btqca & hci_qca) drivers
 - Minimum encryption key size debugfs setting (this is required for
   Bluetooth Qualification)
 - Fix hidp_send_message() to have a meaningful return value
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-17 12:37:47 -07:00
Lan Tianyu
bafe1e79e0 MAINTAINERS: Fix Hyperv vIOMMU driver file name
The Hyperv vIOMMU file name should be "hyperv-iommu.c" rather
than "hyperv_iommu.c". This patch is to fix it.

Signed-off-by: Lan Tianyu <Tianyu.Lan@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-08-17 15:29:39 -04:00
Nishad Kamdar
61e0f39105 tools: hv: Use the correct style for SPDX License Identifier
This patch corrects the SPDX License Identifier style
in the trace header file related to Microsoft Hyper-V
client drivers.
For C header files Documentation/process/license-rules.rst
mandates C-like comments (opposed to C source files where
C++ style should be used)

Changes made by using a script provided by Joe Perches here:
https://lkml.org/lkml/2019/2/7/46

Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-08-17 15:29:34 -04:00
Adrian Vladu
2d35c66036 tools: hv: fix typos in toolchain
Fix typos in the HyperV toolchain.

Signed-off-by: Adrian Vladu <avladu@cloudbasesolutions.com>

Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: Sasha Levin <sashal@kernel.org>
Cc: Alessandro Pilotti <apilotti@cloudbasesolutions.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-08-17 15:29:28 -04:00
Adrian Vladu
b099515607 tools: hv: fix KVP and VSS daemons exit code
HyperV KVP and VSS daemons should exit with 0 when the '--help'
or '-h' flags are used.

Signed-off-by: Adrian Vladu <avladu@cloudbasesolutions.com>

Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: Sasha Levin <sashal@kernel.org>
Cc: Alessandro Pilotti <apilotti@cloudbasesolutions.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-08-17 15:29:23 -04:00
Adrian Vladu
5912e791f3 tools: hv: fixed Python pep8/flake8 warnings for lsvmbus
Fixed pep8/flake8 python style code for lsvmbus tool.

The TAB indentation was on purpose ignored (pep8 rule W191) to make
sure the code is complying with the Linux code guideline.
The following command doe not show any warnings now:
pep8 --ignore=W191 lsvmbus
flake8 --ignore=W191 lsvmbus

Signed-off-by: Adrian Vladu <avladu@cloudbasesolutions.com>

Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: Sasha Levin <sashal@kernel.org>
Cc: Dexuan Cui <decui@microsoft.com>
Cc: Alessandro Pilotti <apilotti@cloudbasesolutions.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-08-17 15:29:18 -04:00
Linus Torvalds
05c5253269 Merge branch 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
 "I2C has one revert because of a regression, two fixes for tiny race
  windows (which we were not able to trigger), a MAINTAINERS addition,
  and a SPDX fix"

* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: stm32: Use the correct style for SPDX License Identifier
  i2c: emev2: avoid race when unregistering slave client
  i2c: rcar: avoid race when unregistering slave client
  MAINTAINERS: i2c-imx: take over maintainership
  Revert "i2c: imx: improve the error handling in i2c_imx_dma_request()"
2019-08-17 10:44:50 -07:00
Linus Torvalds
2f478b6011 RISC-V updates for v5.3-rc5
These updates include:
 
 - Two patches to fix significant bugs in floating point register
   context handling
 
 - A minor fix in RISC-V flush_tlb_page(), to supply a valid end
   address to flush_tlb_range()
 
 - Two minor defconfig additions: to build the virtio hwrng driver by
   default (for QEMU targets), and to partially synchronize the 32-bit
   defconfig with the 64-bit defconfig
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEElRDoIDdEz9/svf2Kx4+xDQu9KksFAl1XVWUACgkQx4+xDQu9
 KkvF8w//b5zWgQVjTpPtaBDz18AKeSRivBAYDexJOangtbz7j7B0uuR3Rjd7nWpP
 Ky3R9UKKTms9/wg/jnY0bSd7FzNW8om22gnbTDPTIq4EEuTrsHBIIyFd/P+/5w5p
 zDl5qrWCDNQoYQ9OlBRTAGFZuw1fv5Nd90FDZtI0GlTVdZDu8TPuL2o8HQ3DcSVM
 /yaqm/ceB6mNmIjY6YF3YviwWn3KcfeHKqw3P0SDAPFwBF4kP8q/47QqAh8a1uVr
 M5upTf5ccnGe4lJhLBQLOir7Ua80rH11ZBGlVWfN2Vxf8aFaYPfjYBnm2ByJaHBd
 Ooux1u1fghLqWBRfiNaIwalOZBVLyWF9Q3FpCYauJNsJ0ldHrkB/Pdfo+lGEUqKq
 xx6SPwA9tnIiUe0X8Rh2duOz0e7HjXzU6J6VmdEGydLNlwTz/vwFeEqWDfpEooXE
 AEBr2vU44CQ8s0TWDD2W3oGV5qwyCmI86Ib9jcIpZmrbVGt6lukpD7DDOCD3hjhz
 moh7H4thytS7su+O4VZwsshYfQ/JX5Y9YhGbi7xYh8LUkHciREja1Qi14owkzkcd
 A8u6rvWkWqUxuqGJTkMSlU61O02+z2LoTV4Iwvm6Jt55OGmx58gDHDATobyRBn2b
 HyKyQKW4ur9pZQGlAk9tfglSeTTP6FcX6ZMapubM32VWJ/ZNzcM=
 =dwBU
 -----END PGP SIGNATURE-----

Merge tag 'riscv/for-v5.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux

Pull RISC-V fixes from Paul Walmsley:

 - Two patches to fix significant bugs in floating point register
   context handling

 - A minor fix in RISC-V flush_tlb_page(), to supply a valid end address
   to flush_tlb_range()

 - Two minor defconfig additions: to build the virtio hwrng driver by
   default (for QEMU targets), and to partially synchronize the 32-bit
   defconfig with the 64-bit defconfig

* tag 'riscv/for-v5.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  riscv: Make __fstate_clean() work correctly.
  riscv: Correct the initialized flow of FP register
  riscv: defconfig: Update the defconfig
  riscv: rv32_defconfig: Update the defconfig
  riscv: fix flush_tlb_range() end address for flush_tlb_page()
2019-08-17 10:36:47 -07:00
Greg Kroah-Hartman
6a5f43d1d8 USB-serial fixes for 5.3-rc5
Here are some new modem device ids.
 
 All have been in linux-next with no reported issues.
 
 Signed-off-by: Johan Hovold <johan@kernel.org>
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYIAB0WIQQHbPq+cpGvN/peuzMLxc3C7H1lCAUCXVe4uwAKCRALxc3C7H1l
 CAEzAP4y40hA9kURiWO9uraTS03LPYc/uswVhIp5+4fyfnt/PwD+JtqGzpBAt8c9
 vkXbLOLHxreIrjkN0EUj/jFaAMHT/AQ=
 =0zL4
 -----END PGP SIGNATURE-----

Merge tag 'usb-serial-5.3-rc5' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus

Johan writes:

USB-serial fixes for 5.3-rc5

Here are some new modem device ids.

All have been in linux-next with no reported issues.

Signed-off-by: Johan Hovold <johan@kernel.org>

* tag 'usb-serial-5.3-rc5' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial:
  USB: serial: option: add the BroadMobi BM818 card
  USB: serial: option: Add Motorola modem UARTs
  USB: serial: option: add D-Link DWM-222 device ID
  USB: serial: option: Add support for ZTE MF871A
2019-08-17 17:09:33 +02:00
Marcel Holtmann
58a96fc353 Bluetooth: Add debug setting for changing minimum encryption key size
For testing and qualification purposes it is useful to allow changing
the minimum encryption key size value that the host stack is going to
enforce. This adds a new debugfs setting min_encrypt_key_size to achieve
this functionality.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2019-08-17 13:54:40 +03:00
Linus Torvalds
6e625a1a3f Xtensa fixes for v5.3:
- add missing isync into cpu_reset to make sure ITLB changes are
   effective.
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCAAxFiEEK2eFS5jlMn3N6xfYUfnMkfg/oEQFAl1W6QYTHGpjbXZia2Jj
 QGdtYWlsLmNvbQAKCRBR+cyR+D+gRHy6EACXPega7A/w9noqMosAWlqVGRS08tlH
 DCWSyqrwYeDBcG14lHUCzPUyV1xHTnOnplYtj33pvJX0PSh8ERAcARI9MBriwVY8
 hfEcLIc0dOz9wP/bZuYXM6OgCFd34reozYU43c9/r28A+bUMARF2gxuzhxiY8CNj
 7gw5rJDSiTGFK919/gdElu5HVY0LtW9DUBIgAZcdqA1rnu8vOV0oitB8/xPUNUex
 WrGWKgv32xy3UWMZD9b5G81lHs+zCvXxUVbE7UEAT2AqzaB6FpiEW8V6OekckJVD
 mZGtWJIQYMlh5bJR9x4+NQOlysYnZxhEzzzJxEFlG9E3Hm3CkeSt7mYhxFi41cDH
 1G+34qm7JEJWwOBeSPzb/RqAGPzbjp0EkVad0M0ocuPjm8+AsojonH749Ox58gWL
 RBYvaKH98nYPkD2mu6vMHZGwOFUr8iJSNBel+8IejiOifUKJiZjRCpZcNK6Toc5h
 /RVSQuKeTKEe/uZhMZTGkgFqGrTvWOipbEW3+//QSxJVTiezjZC5LiMwGZ10xHBN
 aGilB6Ty7bPi/JBhSZNNxKMYAvS3jnOVdVpggWyVHxXSRgnJ+WKGOdcgBGjWFnL8
 WPP0Uwcs7ieo6Y92RfVWNhAYhazGSrCVJ6/M12O22xVPWzyJTgQSK4H4bj6H7n0s
 cXTvRnJBYsVqDg==
 =Awr/
 -----END PGP SIGNATURE-----

Merge tag 'xtensa-20190816' of git://github.com/jcmvbkbc/linux-xtensa

Pull Xtensa fix from Max Filippov:
 "Add missing isync into cpu_reset to make sure ITLB changes are
  effective"

* tag 'xtensa-20190816' of git://github.com/jcmvbkbc/linux-xtensa:
  xtensa: add missing isync to the cpu_reset TLB code
2019-08-16 17:27:55 -07:00